JVC DVD Player HR XVC16BU User Manual

DVD PLAYER &  
VIDEO CASSETTE RECORDER  
HR-XVC16BU  
HR-XVC17SU  
INSTRUCTIONS  
EN  
LPT1127-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL.  
AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
CAUTION:  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or  
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa-  
tion, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING  
TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and operating  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience recepta-  
cles, and the point where they exit from the product.  
instructions should be read before the product is operated.  
2. Keep these instructions. - The safety, operating and use  
instructions should be retained for future reference.  
11. Only use attachments/accessories specified by the  
manufacturer.  
3. Heed all warnings. - All warnings on the product and in  
the operating instructions should be adhered to.  
4. Follow all instructions. - All operating and use instruc-  
tions should be followed.  
5. Do not use this product near water. – For example: near  
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet  
basement; or near a swimming pool; and other areas  
located near water.  
6. Clean only with dry cloth. – Unplug this product from the  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with appara-  
tus. When a cart is used, use caution when moving  
the cart/product combination to avoid injury from  
tip-over.  
wall outlet before cleaning. Do not use liquid cleaners.  
7. Do not block any ventilation openings. Install in accor-  
dance with the manufacturer’s instructions. Slots and  
-
openings in the cabinet are provided for ventilation and to  
ensure reliable operation of the product and to protect it  
from over- heating. The openings should never be blocked  
by placing the product on a bed, sofa, rug or other similar  
surface. This product should not be placed in a built-in  
installation such as a bookcase or rack unless proper ven-  
tilation is provided or the manufacturer’s instructions have  
been adhered to.  
13. Unplug this product during lightning storms or when  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the product has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the product, the product has been  
exposed to rain or moisture, does not operate nor-  
mally, or has been dropped.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong.The wide  
blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
MTS (Multi-Channel TV Sound) . . . . . . . . . .21  
VCR Tape Recording . . . . . . . . . . . . . . . .22-25  
Basic Instructions . . . . . . . . . . . . . . . . . . . . .22  
Timer Recording . . . . . . . . . . . . . . . . . . .22-23  
Instant Timer Recording . . . . . . . . . . . . . . .24  
Recording from External Components . . . . .24  
Copying from DVD to VCR . . . . . . . . . . . . .25  
On-Screen Display - VCR . . . . . . . . . . . . . . .25  
Additional VCR Information . . . . . . . . . . . . . .26  
VCR Auto Play System . . . . . . . . . . . . . . . . .26  
S-VHS Quasi Playback (SQPB) . . . . . . . . . .26  
Easy Information . . . . . . . . . . . . . . . . . . . . .26  
Playing a DVD or Video CD . . . . . . . . . . . .27-29  
Playback Setup . . . . . . . . . . . . . . . . . . . . . .27  
General Features . . . . . . . . . . . . . . . . . .27-29  
• Moving to another TITLE . . . . . . . . . . . . .27  
• Moving to another CHAPTER . . . . . . . . .27  
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . .27  
• Still Picture and Frame-by-Frame  
Contents  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Moisture Condensation . . . . . . . . . . . . . . . . . .5  
Symbols Used in this Manual . . . . . . . . . . . .5  
About the  
Symbol Display . . . . . . . . . . . . .5  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5  
Types of Playable Discs . . . . . . . . . . . . . . . . .6  
Disc-related terms . . . . . . . . . . . . . . . . . . . . .6  
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .7  
Notes on Regional Codes . . . . . . . . . . . . . . . .7  
Notes on Copyrights . . . . . . . . . . . . . . . . . . . .7  
Notice for Progressive Scan Use . . . . . . . . . .7  
About the Remote Control . . . . . . . . . . . . . . .7  
Selecting the Viewing Source . . . . . . . . . . . . .7  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Playback . . . . . . . . . . . . . . . . . . . . . . . . .28  
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
• Time Search . . . . . . . . . . . . . . . . . . . . . .28  
• Marker Search . . . . . . . . . . . . . . . . . . . . .28  
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . .28  
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
• Changing the Audio Channel . . . . . . . . . .29  
• Last Scene Memory . . . . . . . . . . . . . . . . .29  
• Screen Saver . . . . . . . . . . . . . . . . . . . . . .29  
Special DVD Features . . . . . . . . . . . . . . . .29  
• Checking the contents of DVD discs:  
Preparation . . . . . . . . . . . . . . . . . . . . . .10  
Connecting an Antenna or Cable TV . . . . . . .11  
Basic TV Connections . . . . . . . . . . . . . . .11-12  
Optional TV Connections . . . . . . . . . . . . . . .12  
Audio Connection for DVD . . . . . . . . . . . .12-13  
Initial Settings - VCR . . . . . . . . . . . . . . . . .14-15  
General Operation . . . . . . . . . . . . . . . . . . . .14  
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . .14  
• Manual Clock Set . . . . . . . . . . . . . . . . . . .14  
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .14  
TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• Auto Channel Programming . . . . . . . . . .15  
To Add or Erase Channels . . . . . . . . . . . .15  
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• FUNCTION OSD . . . . . . . . . . . . . . . . . .15  
• AUDIO MODE . . . . . . . . . . . . . . . . . . . . .15  
• BROADCAST TYPE  
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
• Title Menu . . . . . . . . . . . . . . . . . . . . . . .29  
• Disc Menu . . . . . . . . . . . . . . . . . . . . . . .29  
• Camera Angle . . . . . . . . . . . . . . . . . . . .29  
• Changing the Audio Language . . . . . . . . .29  
• Subtitles . . . . . . . . . . . . . . . . . . . . . . . .29  
On-Screen Display - DVD . . . . . . . . . . . . . . .30  
Maintenance and Service . . . . . . . . . . . . . . .30  
Playing an Audio CD Disc or MP3 Disc . . . .31  
Audio CD and MP3 Disc Features . . . . . . . . .31  
• Pause . . . . . . . . . . . . . . . . . . . . . . . . . .31  
(STEREO / SAP / MONO) . . . . . . . . . . . .15  
• AUDIO OUTPUT  
(STEREO / LEFT / RIGHT) . . . . . . . . . . .15  
Initial Settings - DVD . . . . . . . . . . . . . . . . .16-19  
General Operation . . . . . . . . . . . . . . . . . . . .16  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .16  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
REMOTE CONTROL FUNCTION . . . . . . . .19  
• Moving to another Track  
. . . . . . . . . . . .31  
• Repeat Track / All / Off . . . . . . . . . . . . . . .31  
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
• Random . . . . . . . . . . . . . . . . . . . . . . . . . .32  
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . .32  
Programmed Playback . . . . . . . . . . . . . . . .32  
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .34  
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . .34  
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Moving to another File . . . . . . . . . . . . . . . . .34  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
To rotate picture . . . . . . . . . . . . . . . . . . . . . .34  
Operation . . . . . . . . . . . . . . . . . . . . . . .20  
VCR Tape Playback . . . . . . . . . . . . . . . . .20-21  
Basic Instructions . . . . . . . . . . . . . . . . . . . . .20  
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .20  
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .20  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Still Picture and Frame-by-Frame Playback .20  
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .21  
CM SKIP (Commercial Skip) . . . . . . . . . . . . .21  
Reference . . . . . . . . . . . . . . . . . . . . . . .35  
Language Codes . . . . . . . . . . . . . . . . . . . . . .35  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Troubleshooting . . . . . . . . . . . . . . . . . . . .36-37  
Specifications . . . . . . . . . . . . . . . . . . . . . . . .38  
VHS Hi-Fi Stereo / MTS Broadcast . . . . . . . .21  
Hi-Fi Stereo Audio Sound . . . . . . . . . . . . . . .21  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future  
reference.  
About the  
Symbol Display  
” may appear on your TV display during  
operation and indicates that the function is not  
permitted by this unit or the disc or not available at  
that time.  
This manual provides information on the operation  
and maintenance of your DVD+VCR. Should the unit  
require service, contact an Authorized Service  
Center.  
Notes on Discs  
Handling Discs  
Moisture Condensation  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints do not get on  
the surface. Never stick paper or tape on the disc.  
Never operate the DVD+VCR immediately after  
moving it from a cold location to a warm location.  
Leave it unplugged for two or three hours without  
operating it.  
If you use the DVD+VCR in such a situation, it may  
damage discs/tapes and internal parts.  
Symbols Used in this Manual  
Indicates hazards likely to cause harm to the  
unit itself or other material damage.  
Storing Discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
Note:  
Tip:  
Indicates special notes and operating  
features.  
Indicates tips and hints for making the task  
easier.  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor  
picture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center out.  
A section whose title has one of the following sym-  
bols is applicable only to the disc represented by the  
symbol.  
DVD  
DVD  
VCD  
Video CDs  
CD  
Audio CDs  
MP3  
MP3 Discs  
JPEG  
JPEG Discs  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of Playable Discs  
Disc-related terms  
DVD  
MP3  
(8 cm / 12 cm disc)  
MP3 is a popular compression format used for digital  
audio files that yields very high near-CD quality sound.  
Video CD (VCD)  
(8 cm / 12 cm disc)  
JPEG  
Audio CD  
Joint Pictures Expert Group. JPEG is a compressed  
file format that allows you to save images with no  
limit on the number of colors.  
(8 cm / 12 cm disc)  
In addition, this unit plays DVD-R, DVD+R, DVD-RW,  
DVD+RW, and CD-R / CD-RW that contains audio  
titles, and/or JPEG files.  
Title (DVD only)  
A title is generally a distinct section of a DVD disc.  
For example the main feature could be title 1, a docu-  
mentary describing how the film was made could be  
title 2, and cast interviews could be title 3. Each title  
is assigned a reference number enabling you to  
locate it easily.  
Notes:  
Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD -R, DVD +R,  
DVD -RW, DVD +RW) disc itself, some CD-R/RW  
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs  
cannot be played on the unit.  
Chapter (DVD only)  
A chapter is a segment of a title such as a scene in a  
film or one interview in a series. Each chapter is  
assigned a chapter number, enabling you to locate  
the chapter you want. Depending on the disc, chap-  
ters may not be recorded.  
DVD-RW disc can only be played if it was record-  
ed in VIDEO mode and finalized.  
Do not attach any seal or label to either side (the  
labelled side or the recorded side) of a disc.  
Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal) since they may result in  
malfunctions.  
Track  
A distinct element of audio/visual information, such as  
the picture or sound track for a specific language  
(DVD), or a musical piece on a video or audio CD.  
Each track is assigned a track number, enabling you  
to locate the track you want. DVD discs allow one  
track of video (with multiple angles) and several  
tracks of audio.  
Notes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs  
may be intentionally programmed by software manu-  
facturers. This unit plays DVDs and Video CDs  
according to disc content designed by the software  
manufacturer, therefore some playback features may  
not be available or other functions may be added.  
Types of Video CDs  
There are two types of Video CDs:  
Video CDs equipped with PBC (Version 2.0)  
PBC (playback control) functions allow you to  
interact with the system via menus, search  
functions, or other typical computer-like operations.  
Moreover, still pictures of high resolution can be  
played if they are included in the disc.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as Audio CDs, these  
discs allow playback of video pictures as well as  
sound, but they are not equipped with PBC.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regional code  
About the Remote Control  
This DVD+VCR is designed and  
manufactured for playback of  
region “1” encoded DVD software.  
This unit can play only DVD discs  
labeled “1” or “ALL”.  
Operation Range  
1
ALL  
Point the Remote Control at the remote sensor and  
press the buttons.  
Distance: About 23 ft (7 m) from the front of the  
remote sensor.  
Angle:  
About 30° in each direction of the front of the  
remote sensor.  
Notes on Regional Codes  
Most DVD discs have a globe with one or more  
Battery installation  
numbers in it clearly visible on the cover.  
This number must match your DVD+VCR’s  
regional code or the disc cannot play.  
Detach the battery cover on the rear of  
the Remote Control, and insert two  
(R03/AAA) size batteries with 3 and #  
aligned correctly.  
If you try to play a DVD with a different region  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
Do not mix old and new batteries and never  
mix different types of batteries such as stan-  
dard, alkaline, etc.  
Notes on Copyrights:  
It is forbidden by law to copy, broadcast, show,  
broadcast via cable, play in public, or rent copyright-  
ed material without permission.  
Selecting the Viewing Source  
You must select one of your output sources (DVD or  
VCR) to view on the TV screen.  
This product features the copy protection function  
developed by Macrovision. Copy protection signals  
are recorded on some discs. When recording and  
playing the pictures of these discs picture noise will  
appear. This product incorporates copyright protec-  
tion technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection tech-  
nology must be authorized by Macrovision  
If you want to view DVD deck output source:  
Press DVD until DVD indicator in the display  
window lights and output source of DVD deck  
is viewed on the TV screen.  
If you want to view VCR deck output source:  
Press VCR until VCR indicator in the display  
window lights and output source of VCR deck  
is viewed on the TV screen.  
Corporation, and is intended for home and other limit-  
ed viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or dis-  
assembly is prohibited.  
Notes:  
If you insert a disc while the DVD+VCR is in the VCR  
mode, the DVD+VCR will switch to DVD mode  
automatically.  
Notice for Progressive Scan Use  
If you insert a cassette tape without prevention tab while  
the DVD+VCR is in the DVD mode, the DVD+VCR will  
switch to VCR mode automatically.  
To selecting and viewing the E to E sources (tuner,  
line1, line2), the unit must be in VCR mode.  
CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION TO  
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE  
ARE QUESTIONS REGARDING OUR TV SET COM-  
PATIBILITY WITH THIS MODEL 525p DVD+VCR,  
PLEASE CONTACT OUR CUSTOMER SERVICE  
CENTER.  
Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D sym-  
bol are trademarks of Dolby Labora-tories.  
DTS and DTS Digital Out are trademarks of  
Digital Theater Systems, Inc.  
This model is equipped with SQPB (S-VHS  
QUASI PLAYBACK) that makes it possible to  
play back S-VHS recordings with regular VHS  
resolution.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
a
b
c
d
Disc Tray (DVD deck)  
Indicates when the Progressive scan is  
active.  
[P]  
Insert a disc here.  
Cassette Compartment (VCR deck)  
Insert a video cassette here.  
Indicates repeat mode.  
DVD+VCR is in timer recording or a timer  
recording is programmed (VCR part only).  
POWER 1/:  
Switches the DVD+VCR ON and OFF.  
A cassette is in the VCR deck.  
REW (m)  
- DVD: Skip to beginning of current chapter or track,  
press twice in quick successions to go to previous  
chapter or track. Press and hold button for about two  
seconds to search backward.  
The VCR deck is selected.  
VCR  
REC  
PM  
DVD+VCR is Recording. (VCR part only)  
Indicates PM time. (AM is not diplayed.)  
Lights when TV mode is active.  
- VCR: Rewinds the tape during the stop mode or for  
fast reverse picture search.  
TV  
e
f
PLAY (N)  
Starts playback of a disc or tape.  
Indicates total playing time,  
elapsed time, remaining time  
or current deck status  
FF (M)  
- DVD: Skip to next chapter or track. Press and hold  
for two seconds for a fast forward search.  
- VCR: Advances the tape during the STOP mode or  
for fast forward picture search.  
(Playback, Pause, etc).  
k
l
m
n
Remote Sensor  
Point the DVD+VCR Remote Control here.  
EJECT (Z)  
Ejects the tape in the VCR deck.  
g
h
STOP (x)  
Stops playback of the disc or tape.  
CH -/+  
PAUSE (X)  
To scan up or down through memorized channels.  
Pause playback or recording. Press repeatedly for  
frame-by-frame playback.  
REC (z)  
To record normally or to activate One-touch Timer  
i
j
OPEN/CLOSE (Z)  
Opens or closes the disc tray.  
Recording by repeated presses.  
o
n
VCR/DVD (output select)  
Display Windows  
Select one of your output sources to view on the TV  
screen between DVD and VCR.  
LINE2 (VIDEO/AUDIO (L/R) input)  
Connect to the audio/video output of an external  
source (Audio system, TV/Monitor, Another VCR).  
The DVD deck is selected.  
DVD  
A disc is in the DVD deck.  
(Lights when a disc is in the DVD deck  
and Flashes when no disc.)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DISPLAY Accesses On-Screen Display.  
Switches between the clock, tape counter and  
tape remaining modes on the display.  
DVD Select the DVD+VCR function mode to DVD.  
EJECT (Z) Ejects the tape in the VCR deck.  
ENTER/OK Confirms menu selections.  
Displays functions on the TV screen.  
MARKER Marks any point during playback.  
OPEN/CLOSE (Z) Opens and closes the disc tray.  
PAUSE (X) Pause playback or recording.  
Press repeatedly for frame-by-frame  
playback.  
PLAY (N) Starts playback.  
POWER (1/:) Switches DVD+VCR ON and OFF.  
PROGRAM Shows or hides the menu for Program  
playback of Audio CD.  
RANDOM Plays tracks in random order.  
REC (z) Starts recording. Press repeatedly to set the  
recording time.  
REPEAT Repeats chapter, track, title or all.  
REPEAT A-B Repeats sequence between two points  
(A and B).  
RETURN (O) Removes the setup menu.  
REW (m)/FF (M)  
- DVD: Search backward or forward.  
- VCR: Rewinds/Advances the tape during the STOP  
mode, for fast backward/forward picture search.  
SEARCH Displays Marker Search menu.  
SETUP MENU Accesses or removes DVD Setup menu  
and VCR menu.  
SKIP (. / >) Go to next chapter or track.  
Returns to beginning of current  
chapter or track or go to previous  
chapter or track.  
0-9 Selects numbered options in a menu.  
b B v V Selects menu options.  
SPEED Selects recording speed.  
STOP (x) Stops playback or recording.  
SUBTITLE Selects a subtitle language.  
TITLE Displays the disc’s Title menu, if available.  
Fast forwards picture search through 30 seconds of  
recording.  
AUX Selects the VCR deck’s source  
(Tuner, LINE 1, or LINE 2).  
TV/VCR To view channels selected by the VCR tuner  
A.MONITOR Selects an audio language (DVD) or an  
or by the TV tuner.  
audio channel (VCD).  
VCR Select the DVD+VCR function mode to VCR.  
ZOOM Enlarges DVD video image.  
ANGLE Selects VCR channels. Adjusts manually the  
tape’s picture on the TV screen.  
CH -/+ Selects VCR channels. Adjusts manually the  
tape’s picture on the TV screen.  
CLEAR (0000) Removes a mark on the Marker Search  
menu.  
DISC MENU Accesses menu on a DVD disc.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
a
b c d e  
f
g
h
a
b
ANT.IN  
e
f
g
h
AUDIO OUT (Left/Right) (DVD OUT)  
Connect to a TV or other equipment with audio inputs.  
Connect the VHF/UHF/CATV antenna to this terminal.  
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))  
Connect the audio/video output of an external source  
(Audio system, TV/Monitor, VCR, Camcorder).  
AC Power Cord  
Plug into the power source.  
RF. OUT  
c
d
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))  
Connect to a TV with video and audio inputs.  
Connect to a TV with RF coaxial inputs.  
COAXIAL (DIGITAL AUDIO OUT jack)  
(DVD OUT)  
Connect to digital (coaxial) audio equipment.  
COMPONENT/PROGRESSIVE SCAN VIDEO  
OUT (Y Pb Pr) (DVD OUT)  
Connect to a TV with Y Pb Pr inputs.  
Preparation  
Depending on your TV and other equipment there are various ways you can connect the  
player. Please refer to the manuals of your TV, VCR, stereo system or other devices as  
necessary for additional connection information.  
Notes:  
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away from  
each other or turn off the unit after removing the disc.  
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.  
Do not connect the DVD+VCR’s AUDIO OUT jack to the phone in jack (record deck) of your audio system.  
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection system.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To view or record a CATV channel when  
using cable box  
Connecting an Antenna  
or Cable TV  
1
2
3
Tune the TV to the DVD+VCR output channel  
(CH 3 or 4).  
a
:
Antenna  
Set the DVD+VCR channel selector to the cable  
output channel. (Example: CH3)  
Disconnect the antenna from the rear of the TV and  
identify the antenna cable. If it is a round 75 ohm  
coaxial cable connect it directly to the jack marked  
ANT.IN on your DVD+VCR. If your antenna cable is  
flat connect it to a 300-ohm to 75-ohm antenna  
adaptor (not supplied) and slip the adaptor over the  
ANT.IN jack. Don’t attempt to screw it into to the  
DVD+VCR.  
Select a channel using the cable converter.  
Notes:  
With this connection, you cannot record one program  
while viewing another.  
If you are using a cable box to tune channels, it is not  
necessary to do Auto Channel Set.  
b
Cable TV:  
If your cable connection has no converter or  
descrambler, unscrew the cable from your TV and  
attach it to the ANT.IN jack on the DVD+VCR.  
If a converter is required connect a coaxial cable from  
the wall jack to the IN connector on the converter,  
and a coaxial cable from the OUT connector on the  
converter to the ANT IN on your DVD+VCR. This  
cable hookup permits both TV and DVD+VCR  
operation.  
Basic TV Connections  
Make one of the following connections, depending on  
the capabilities of your TV.  
Antenna  
Antenna  
Rear of TV  
ANTENNA  
INPUT  
VIDEO  
INPUT  
AUDIO INPUT  
R
L
R
V
A1  
OR  
OR  
Rear of DVD+VCR  
Rear of DVD+VCR  
C
A2  
Y
Pr  
Pb  
R
L
COMPONENT/PROGRESSIVE SCAN  
VIDEO INPUT  
AUDIO INPUT  
Rear of TV  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RF coaxial connection  
Optional TV Connections  
These connections support only DVD playback.  
The tuner and VCR still output through the RF.OUT  
(R) or DVD/VCR OUT (A, V) jacks.  
Connect the RF.OUT jack on the DVD+VCR to the  
antenna in jack on the TV using the supplied 75-ohm  
Coaxial Cable (R).  
How to set the DVD+VCR’s RF output  
channel  
Component Video / Progressive Scan  
connection  
If your television is a high-definition or “digital ready”  
television, you may take advantage of the  
DVD+VCR’s progressive scan output for the highest  
video resolution possible.  
1. When the DVD+VCR is turned off, press and hold  
both CH - and CH + on the front panel for more  
than five seconds. “RF03” or “RF04” appears in  
the display window.  
1. Connect the COMPONENT/PROGRESSIVE  
SCAN VIDEO OUT jacks on the DVD+VCR to the  
corresponding in jacks on the TV using an option-  
al Y Pb Pr cable (C).  
2. Connect the Left and Right AUDIO OUT jacks of  
the DVD+VCR to the audio left/right in jacks on  
the TV (A2) using an optional audio cables.  
2. Press either CH - or CH + to change the RF out-  
put channel (RF03 or RF04). Tune the TV to this  
channel.  
3. Turn off the DVD+VCR.  
Audio/Video connection  
1. Connect the DVD/VCR VIDEO OUT jack on the  
DVD+VCR to the video in jack on the TV using an  
optional video cable (V).  
2. Connect the Left and Right DVD/VCR AUDIO  
OUT jacks on the DVD+VCR to the audio left/right  
in jacks on the TV (A1) using an optional audio  
cables.  
Notes:  
When you use Composite Video signal, set the  
Progressive Scan to “Off” on the setup menu.  
Progressive scan does not work with the Composite  
video connections (yellow VIDEO OUT jack).  
If your TV does not accept the Progressive Scan format,  
the picture will appear scrambled. Switch to composite  
video output.  
Note:  
If you use this connection, set the TV’s source selector to  
VIDEO.  
Audio Connection for DVD  
You can listen to playback using DVD/VCR AUDIO  
OUT (A1), AUDIO OUT (A2), COAXIAL (X) and RF.  
OUT (R) connections. COAXIAL (X) and AUDIO OUT  
(A2) is used only for listening to DVD playback.  
(See page 11.)  
Connecting to an amplifier equipped with  
two channel analog stereo  
Connect the Left and Right AUDIO OUT (or  
DVD/VCR AUDIO OUT) jacks on the DVD+VCR to  
the audio left and right in jacks on your amplifier,  
receiver, or stereo system using an optional audio  
cables (A1, A2).  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/Video  
receiver equipped with a multi-channel decoder  
(Dolby Digital™, MPEG 2, or DTS)  
Connecting External Audio/Video (A/V)  
source to DVD+VCR  
Connect the VCR IN LINE 1 or LINE 2 jacks on the  
DVD+VCR to the audio/video out jacks on your  
accessory component, using the optional audio/video  
cables. (Refer to page 24 for “Recording from  
External Components”.)  
1. Connect the DVD+VCR’s DIGITAL AUDIO OUT  
jacks (COAXIAL X) to the corresponding in jack  
on your amplifier. Use a digital (COAXIAL X)  
audio cable.  
2. You will need to activate the DVD+VCR’s digital  
output. (See “AUDIO” on page 18).  
Digital Multi-channel sound  
Jack panel of external source  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD+VCR (MPEG  
2, Dolby Digital and DTS). Check the receiver manual  
and the logos on the front of the receiver.  
Caution:  
This DVD+VCR is not equipped with DTS decoder,  
but DTS will be output through Digital coaxial out  
when DTS audio stream is selected in DVD disc  
soundtrack menu.  
Notes:  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will pro-  
duce a strong, distorted sound or no sound at all.  
Six Channel Digital Surround Sound via digital connec-  
tion can only be obtained if your receiver is equipped  
with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the  
on-screen display, press A.MONITOR.  
Rear of DVD+VCR  
A1  
A2  
X
R
L
COAXIAL  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO CLOCK SET  
Initial Settings - VCR  
The Auto Clock Set feature is set to ON at the fac-  
tory. In the ON setting, the DVD+VCR looks for a  
channel carrying XDS (Extended Data Services)  
information. XDS updates the clock using the  
Coordinated Universal Time.  
By using the VCR Setup menu, you can make  
various adjustments to items such as clock setting,  
and timer recordings.  
- Use b / B to choose ON or OFF.  
DAYLIGHT SAVINGS  
Your DVD+VCR allows Remote Control adjustment  
of several features.  
You can turn Daylight Savings On or Off manually.  
If you choose “AUTO”, the DVD+VCR sets the  
clock using the DST information broadcast in the  
signal (channel).  
General Operation  
1. Press VCR on the Remote Control.  
- Use b / B to choose AUTO, ON or OFF.  
2. Press SETUP MENU and the MAIN menu will  
appear.  
TIME ZONE  
You can set your local Time Zone manually. If you  
choose “AUTO”, the DVD+VCR sets the clock  
using the first Coordinated Universal Time  
information it finds in a broadcast signal.  
- Use b / B to choose the correct time zone  
(AUTO, EASTERN, CENTRAL, MOUNTAIN,  
PACIFIC, ALASKA or HAWAII).  
Notes:  
The Auto Clock feature enables the DVD+VCR to set up  
the clock while the DVD+VCR is turned off.  
3. Use v / V to select the desired menu, then press  
ENTER / OK.  
There are cases where the TV station does not send or  
sends wrong date and/or time information and the  
DVD+VCR sets the incorrect time. If this happens we  
recommend that you set the clock manually.  
4. Use v / V to choose a desired option on the  
selected Menu. Then use b / B to choose a desired  
setting.  
5. Press SETUP MENU when finished.  
Manual Clock Set  
Use v / V / b / B to enter the necessary information.  
Note:  
MONTH : Choose the month.  
Menus remain on-screen for 3 minutes.  
DAY : Choose the date.  
The day of the week will display automatically.  
YEAR : Choose the year.  
TIME : Choose the time.  
CLOCK  
Press and hold b / B to advance clock continuously.  
The DVD+VCR gives you two ways to set the time  
and date: the Auto Clock Feature or Manually.  
Notes:  
If setting the clock manually, “AUTO CLOCK SET” must  
set to “OFF”. If it is left set to “ON,” it will override the  
manual setting after the unit is turned off.  
Auto Clock Set  
The clock uses the 12-hour system. Be sure to set AM  
and PM correctly.  
PROGRAM  
The Timer Recording function allows you to record up  
to 8 programs within a period of one year.  
(See pages 23-24).  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNING  
SETUP  
This DVD+VCR is equipped with a frequency  
synthesized tuner capable of receiving up to 181  
channels. These include VHF channels 2-13, UHF  
channels 14-69 and CATV channels 1-125.  
Auto Channel Programming  
FUNCTION OSD  
The on-screen display can be turned on or off.  
AUDIO MODE  
The DVD+VCR has two separate audio playback sys-  
tems, the high quality VHS Hi-Fi system and standard  
NORMAL mono system. The same audio is generally  
recorded on both systems. The VHS Hi-Fi system  
plays on separate (left and right) channels, and the  
NORMAL system plays monaural sound. The normal  
track is always played so the cassette can be played  
on a DVD+VCR that does not have VHS Hi-Fi.  
1. Choose the SOURCE SELECT option, then use  
b / B to select TUNER.  
Use b / B to switch among TUNER, LINE1, and LINE2.  
2. Choose the AUTO CHANNEL SET option, then  
use b / B to find channels.  
BROADCAST TYPE (STEREO / SAP / MONO)  
• The tuner will automatically cycle through all available  
channels (TV/CATV) in the area and place them in  
the tuner’s memory.  
• After the AUTO CHANNEL SET is complete, the  
TUNING menu will hide and return to the TV screen  
automatically.  
Multichannel Television Sound (MTS) carries stereo  
and/or Second Audio Program (SAP) bilingual signals.  
Set this display to the desired position when both  
MTS stereo and SAP signals are received. When only  
one of the MTS signal is received, the DVD+VCR  
automatically selects the corresponding receiving  
mode (Stereo or SAP) regardless of the selected  
position. For normal operation, the display should be  
in the STEREO position. The DVD+VCR will then  
record a STEREO program when available, and  
record a mono program IF the program is NOT IN  
STEREO. For weak STEREO and/or SAP broadcasts,  
changing the display to mono may give clearer sound.  
• If the power fails or the DVD+VCR is unplugged the  
channel settings are kept in memory for only 3 sec-  
onds.  
3. Make sure the TUNING BAND is set appropriately  
(TV or CATV).  
• TV : If you are using a standard antenna to receive  
channels.  
• CATV : If you are using basic cable to receive  
channels.  
AUDIO OUTPUT (STEREO / LEFT / RIGHT)  
Used during playback [when AUDIO MODE (HI-FI/  
NORMAL) is in HI-FI position] for selecting the audio  
output signals from the AUDIO OUT terminals (L ch  
and R ch), and RF.OUT. This display setting should  
normally be left in the stereo position, so that when a  
stereo tape is played, the stereo sound will be heard  
through the left and right channels. If a mono tape is  
played and the audio output is set to stereo, the  
same mono sound will be heard from both left and  
right channels.  
To Add or Erase Channels  
This feature allows you to add or erase channels  
from memory manually.  
1. Choose the CH. ADD/DEL option, then use b / B  
to select a channel to add or erase.  
2. Use ENTER / OK to add or erase the channel.  
Repeat steps 1 and 2 to add or erase other  
channels.  
In addition to the above settings, these other sources  
are also affected:  
3. Press SETUP MENU to return to the TV screen.  
1. Playback of CD, DVD or VCD  
2. Output of built in tuner, Line 1 or Line 2  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE  
Initial Settings - DVD  
LANGUAGE  
By using the DVD Setup menu, you can make vari-  
ous adjustments to items such as picture and sound.  
You can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 16 to 19.  
English  
Original  
Original  
Original  
Menu Language  
Disc Audio  
Disc Subtitle  
Disc Menu  
To display and exit the Menu:  
Move  
Select  
Press SETUP MENU to display the menu.  
A second press of SETUP MENU will take you back  
to initial screen.  
Menu Language  
Select a language for the VCR and DVD’s setup  
menu and information display.  
To go to the next level:  
Press B on the Remote Control.  
To go back to the previous level:  
Press b on the Remote Control.  
DVD  
Disc Audio / Subtitle / Menu  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
General Operation  
Original: Refers to the original language in which the  
disc was recorded.  
1. Press DVD on the Remote Control.  
Other: To select another language, press number  
buttons then ENTER / OK to enter the corresponding  
4-digit number according to the language code list in  
the reference chapter (see p. 35). If you enter the  
wrong language code, press CLEAR (0000).  
2. Press SETUP MENU.  
The Setup menu appears.  
3. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well  
as alternate setting(s).  
Off (for Disc Subtitle) : Turn off Subtitle.  
4. Use v / V to select the second desired option  
then press B to move to the third level.  
5. Use v / V to select the desired setting then press  
ENTER / OK to confirm your selection.  
Some items require additional steps.  
6. Press SETUP MENU or PLAY (N) to exit the  
Setup menu.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. When the confirm menu appears on your screen  
“Cancel” is highlighted as default. Use the b  
button to highlight “Enter”.  
DISPLAY  
DISPLAY  
TV Aspect  
4
:
3
Display Mode  
Progressive Scan  
Letterbox  
Off  
Move  
Select  
5. Pressing ENTER / OK will set this unit to  
progressive scan mode.  
DVD  
TV Aspect  
4:3 :  
Select when a standard 4:3 TV is connected.  
Notes:  
16:9 : Select when a 16:9 wide TV is connected.  
If you set Progressive Scan to ON in error, you must  
reset the DVD+VCR. Press STOP (x) and hold it for  
more than five seconds before releasing it. The video  
output will be restored to the standard setting, and a  
picture will once again be visible on a conventional  
analog TV or monitor.  
DVD  
Display Mode  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
Do not turn off this DVD+VCR while the  
“PROGRESSIVE SCAN MODE” message is displayed  
in the TV screen.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Panscan: Automatically displays the wide picture on  
the entire screen and cuts off the portions that do not  
fit.  
DVD  
Progressive Scan  
Progressive Scan Video provides the highest quality  
pictures with less flickering.  
If you are using the Component Video jacks for  
connection to a TV or monitor that is compatible with  
a progressive scan signal, set Progressive Scan to  
On.  
To turn on progressive scan:  
Connect component/progressive out of this unit to the  
input of your monitor/television, set your television or  
monitor to component/progressive Input.  
1. Select “Progressive Scan” on the DISPLAY menu  
then press B.  
2. Select “On” using the v / V buttons.  
3. Press ENTER / OK to confirm your selection.  
The confirm menu will appear.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO  
DVD  
DRC (Dynamic Range Control)  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic  
Each DVD disc has a variety of audio output options.  
Set this unit’s AUDIO options according to the type of  
audio system you use.  
presentation possible, thanks to digital audio technology.  
However, you may wish to compress the dynamic range  
of the audio output (the difference between the loudest  
sounds and the quietest ones). This allows you to listen  
to a movie at a lower volume without losing clarity of  
sound. Set DRC to On for this effect.  
AUDIO  
Dolby Digital  
DTS  
Bitstream  
Bitstream  
PCM  
MPEG  
Sample Freq.  
DRC  
48 kHz  
On  
Move  
Select  
DVD  
Dolby Digital / DTS / MPEG  
Bitstream: Select “Bitstream” if you connect the  
DVD+VCR’s DIGITAL AUDIO OUT jack to an  
amplifier or other equipment with a Dolby Digital,  
DTS or MPEG decoder.  
PCM (for Dolby Digital / MPEG): Select when  
connected to a two-channel digital stereo amplifier.  
DVDs encoded in Dolby Digital or MPEG will be  
automatically downmixed to two-channel PCM audio.  
Off (for DTS): If you select “Off”, the DTS signal is  
not output through the DIGITAL AUDIO OUT jack.  
DVD  
Sample Freq. (Frequency)  
If your receiver or amplifier is NOT capable of handling  
96 kHz signals, select 48 kHz. When this choice is  
made, this unit automatically converts any 96 kHz  
signals to 48 kHz so your system can decode them.  
If your receiver or amplifier is capable of handling 96  
kHz signals, select 96 kHz. When this choice is made,  
this unit passes each type of signal through without any  
further processing.  
Check the documentation for your amplifier to verify its  
capabilities.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHERS  
REMOTE CONTROL FUNCTION  
The Auto Play, and B.L.E. settings can be changed.  
Remote Control A/B/C Code Switching  
The remote control is capable of controlling three  
JVC video units independently. Each of the units can  
respond to one of three codes (A, B or C). The  
remote control is preset to send C code signals  
because your unit is initially set to respond to C code  
signals. You can easily modify your unit to respond to  
A or B code signals.  
OTHERS  
PBC  
On  
On  
Off  
Auto Play  
B.L.E.  
Move  
Select  
VCD  
PBC  
Set Playback Control (PBC) to On or Off.  
On: Video CDs with PBC are played according to the  
1/ I  
B
PBC.  
Off: Video CDs with PBC are played the same way  
as Audio CDs.  
ENTER  
1-3  
DVD  
Auto Play  
x
You can set up the DVD+VCR so a DVD disc  
automatically starts playing whenever the DVD is  
inserted.  
If Auto Play mode is set to On, this DVD player will  
search for title that has the longest playback time and  
then play back the title automatically.  
On: Auto Play function is active.  
Off: Auto Play function is not active.  
Note:  
The Auto Play function may not work for some DVDs.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures.  
Set your preference and monitor’s ability.  
Keep pressing ENTER down during step 1.  
1. Press the number Key “1” for A, “2” for B or  
“3” for C to change the remote control code.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
2. Press 1/ I on the unit to turn off the unit with no  
video-tape inserted.  
3. Press B on the unit for over 5 seconds while the  
unit is turned off. The code currently set appears  
on the front display panel.  
4. Press x on the remote control to change the  
unit's code. The code currently set on the remote  
control blinks on the front display panel for  
approximately 5 seconds, and is applied to the  
unit.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
This chapter describes how to operate the VCR and  
DVD.  
Manual Tracking  
To manually adjust the tracking use the CH -/+  
buttons during playback.  
VCR Tape Playback  
Notes:  
Press the VCR button to select the device to be  
operated.  
Vertical jitter requires a very fine adjustment.  
Tracking is automatically reset to normal when the tape  
is ejected or the power cord is unplugged for more than  
3 seconds.  
Basic Instructions  
1. Turn on the TV.  
Search  
2. Tune the TV to the DVD+VCR output channel  
(CH 3 or 4) or if a direct VIDEO/AUDIO  
This function lets you visually search for a tape  
section in either direction: forward and reverse.  
During the high-speed picture search modes, the  
audio is muted and horizontal lines (noise bars)  
appear. Also, a short time is needed to stabilize the  
tape speed when re-entering the PLAY mode so  
slight interference may be observed during this time.  
connection is made between the DVD+VCR and  
the TV, set the TV’s source selector to VIDEO.  
3. Insert a pre-recorded video cassette.  
The  
indicator lights and the DVD+VCR  
powers on automatically.  
4. If the  
(TIMER) indicator in the display window  
To search:  
is lit press POWER 1/: once.  
1. Press REW (m) or FF (M) during playback.  
5. If a tape without a safety tab is inserted the unit  
starts playback automatically.  
2. To return to playback, press PLAY (N).  
If not, press PLAY (N).  
Notes:  
6. Press STOP (x) to stop playback. If the tape  
reaches the end before you press STOP (x) the  
DVD+VCR automatically stops, rewinds and  
ejects the tape.  
After 3 minutes in SEARCH mode the DVD+VCR  
returns to PLAY mode to protect the tape and video  
heads.  
During the tape fast rewinding (backward or forward),  
don’t press the same button (REW or FF) again.  
Otherwise it takes more time to rewind the tape.  
Notes:  
It is not necessary to select the tape speed for playback  
because it is automatically selected by the DVD+VCR.  
Also, during playback the TV/VCR selector switches to  
VCR mode automatically.  
Still Picture and Frame-by-Frame Playback  
When playing back tapes that have been overrecorded  
with new content, the original audio may be audible dur-  
ing auto tracking.  
1. Press PAUSE (X) during playback.  
A still picture appears on the TV screen and the  
audio is muted.  
2
If the still picture vibrates vertically, stabilize it by  
using CH -/+ on the Remote Control.  
Auto Tracking  
3. Press PAUSE (X) repeatedly to advance the  
Automatic tracking adjusts the picture to remove  
snow or streaks when:  
video picture one frame at a time.  
4. To return to playback, press PLAY (N).  
A tape is played for the first time.  
The tape speed (SP, LP, SLP) changes.  
Note:  
Streaks or snow appear due to scratches on the  
After 5 minutes in STILL mode the DVD+VCR stops  
to protect the tape and video heads.  
tape.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slow Motion  
1. While in still mode, press FF (M). The tape is  
played at a speed 1/19 times slower than the  
normal speed.  
2. Use CH -/+ on the Remote Control if necessary to  
adjust the tracking.  
2. Set the AUDIO OUTPUT option to STEREO so  
that the left channel sound (L) is heard from the  
left speaker and the right channel sound (R) is  
heard from the right speaker.  
3. To return to the normal speed, press PLAY (N).  
Notes:  
During slow motion, audio is muted and horizontal lines  
(noise bars) may appear on the TV screen.  
This is normal.  
After 3 minutes in SLOW MOTION mode the DVD+VCR  
goes back to PLAY mode to protect the tape and video  
heads.  
CM SKIP (Commercial Skip)  
This feature is useful for skipping commercials or  
short program segments.  
The other options are (LEFT) POSITION, which  
results in the left channel sound (L) being heard  
from both speakers or (RIGHT) POSITION, which  
results in the right channel sound (R) being heard  
from both speakers.  
1. Press  
in playback mode.  
The DVD+VCR performs a fast forward picture  
search through 30 seconds of recording.  
3. Insert a cassette and press PLAY (N).  
2. Press  
again to extend the search time by an  
addition 30 seconds. The maximum search time is  
3 minutes.  
Note:  
If playing back a HI-FI tape produces noisy audio, manually  
change the menu setting from HI-FI to NORMAL.  
3. When the search is complete, the DVD+VCR  
goes into playback mode automatically.  
MTS (Multi-Channel TV Sound)  
This DVD+VCR can decode MTS stereo and bilingual  
(SAP) off-the-air broadcast sound signals. It also  
decodes stereo TV sound from local cable companies  
as long as they operate on assigned cable  
VHS Hi-Fi Stereo / MTS  
Broadcast  
frequencies and use the EIA-recommended MTS  
stereo/bilingual TV sound system.  
This DVD+VCR is equipped with the VHS Hi-Fi  
audio sound system for recording and playback.  
The information below gives a brief description of  
Hi-Fi audio and how to record and play a tape in the  
Hi-Fi audio mode.  
Multichannel TV Sound Indicator (MTS)  
When you press ENTER / OK one or both of the  
indicators appears on the TV Screen.  
STEREO  
Hi-Fi Stereo Audio Sound  
The DVD+VCR can record in stereo onto the VHS  
Hi-Fi audio tracks when the BROADCAST TYPE  
option is in the STEREO position. The DVD+VCR can  
also record mono audio onto the mono audio track.  
A stereo TV with AUDIO/VIDEO input jacks or a  
stereo audio system is required for true stereo  
playback. To experience the full and rich stereo  
sound available with Hi-Fi recorded tapes,  
we recommend the connection of this unit to a home  
stereo audio system.  
SAP  
Some stations transmit a Second Audio Program,  
which is used for a second language or additional  
information.  
1. Set the AUDIO MODE option to HI-FI on the VCR  
SETUP menu.  
STEREO/SAP  
Use the BROADCAST TYPE option to select the  
desired recording mode (STEREO or SAP).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To record one TV program while watching  
another  
VCR Tape Recording  
Basic Instructions  
1. Press TV/VCR to select the TV mode during  
recording. The TV indicator appears.  
1. Turn on the DVD+VCR and TV.  
2. Using the TV, select the channel to be viewed.  
2. Tune the TV to the DVD+VCR output channel  
(CH 3 or 4) or if a direct VIDEO/AUDIO connec-  
tion is made between the DVD+VCR and the TV,  
set the TV’s source selector to VIDEO.  
Timer Recording  
3. Insert a video cassette with the safety tab intact.  
4. Select the desired channel using CH -/+.  
For unattended recording, you must input the  
channels to be recorded and the starting and ending  
times.  
5. If you are recording from another source via  
audio/video input jacks (at the rear or front panel),  
select LINE1 or LINE2 using AUX, CH + or CH -.  
Things to know before starting  
If you try to set the program timer before setting  
the clock, “PLEASE SET THE CLOCK” appears  
for a moment and then CLOCK menu appears on  
the TV screen. Set the time and date before  
proceeding.  
6. Set the desired recording speed (SP or SLP) by  
pressing SPEED. This DVD+VCR is not designed  
to record in LP mode.  
7. Set the MTS mode (STEREO or SAP). Set the  
BROADCAST TYPE option to SAP if applicable.  
1. Turn on the DVD+VCR and the TV.  
8. Press REC (z) and recording starts. The REC  
indicator appears in the display window. If a cas-  
sette with no safety tab is loaded, the cassette is  
ejected.  
2. Be sure the TV is set to the DVD+VCR output  
channel (3 or 4).  
3. Make sure the TUNING BAND in the TUNING  
menu is set appropriately (TV or CATV).  
9. Press STOP (x) to stop recording. If the tape  
reaches the end before STOP (x) is pressed,  
the DVD+VCR stops, rewinds and ejects the tape.  
4. Press SETUP MENU and the MAIN menu  
appears.  
Tip:  
5. Use v / V to choose the PROGRAM menu and  
Use PAUSE (X) for best results when making changes  
while recording. For example, if you want to change  
channels while recording, first press PAUSE (X) to put the  
unit in pause mode, select the desired channel on the  
DVD+VCR, and then press PAUSE (X) again to resume  
recording.  
press ENTER / OK.  
Note:  
During the VCR recording mode, you cannot change to the  
DVD mode.  
If eight programs are already entered, the FULLY  
PROGRAMMED message appears for a moment  
and then PROGRAM 1 appears on the TV  
screen.  
To pause the recording  
1. Press PAUSE (X) to pause the tape during  
recording. The REC indicator flashes in the display  
window.  
6. Use the v / V buttons to switch between the  
program options, and the b / B buttons to input  
the program information:  
2. When you want to continue recording, press  
PAUSE (X) or press REC (z).  
Input the month, day, start and stop times of the  
program you want to record.  
After 5 minutes in PAUSE mode, the DVD+VCR  
stops automatically to protect the tape and the  
video heads.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel: Select a TV channel, LINE1 or LINE2.  
If you have CABLE TV and use a cable box  
(converter) you must set the channel to match the  
cable box output channel (usually CH 3 or 4).  
Change channels on the cable box instead of with  
the DVD+VCR. If you use a cable converter, you  
can program multiple recordings only on the  
converter box output channel. This is because the  
converter determines what channel you view  
through your DVD+VCR.  
Checking or Erasing the Timer Program  
Programming can be checked whenever the  
DVD+VCR is turned on.  
1. Press SETUP MENU and the MAIN menu  
appears.  
2. Use v / V to choose the PROGRAM menu and  
press ENTER / OK.  
Speed: AUTO mode determines how much tape  
is left and switches the speed from SP to SLP if it  
is necessary to complete recording the program.  
If this occurs there could be some picture and  
sound distortion at the point where the speed  
changes.  
Repeat: To record up to 8 programs on a certain  
day of every week select WEEKLY. To record up  
to 8 programs at the same time Monday through  
Friday select DAILY. Otherwise select ONCE.  
3. Use b / B to select a program you want to check  
or erase. To erase the program, press CLEAR  
(0000).  
4. Press SETUP MENU to return to the TV screen.  
7. Press SETUP MENU and the program is  
memorized by the DVD+VCR.  
Program Priority  
8. Additional programs may be entered by repeating  
steps 1-7.  
9. Ensure you insert a tape with the record safety  
tab intact before the first programmed time.  
If the recording start and end times of preset  
programs overlap on the same day (see the  
example), the second program is not recorded until  
the first is finished.  
10. Press STOP (x) to end timer recording.  
Notes:  
If you make a mistake or want to change a setting, use  
v to select the option and correct it using b / B.  
If the program preset time is past, the “PAST TIME  
PROGRAMMED” message appears on the TV screen.  
Return to the incorrect program and program it with the  
correct time.  
In this example, the first part of program numbers 2  
and 3 are not recorded.  
If you enter a past date, the timer recording will be per-  
formed on that date of the next year.  
If the power fails or the DVD+VCR is unplugged the  
clock and timer settings are kept in memory for only 3  
seconds. Otherwise you must reset the clock and timer.  
If the tape indicator is blinking, no tape is loaded.  
When you are playing DVD at programmed Recording  
time, the DVD+VCR automatically change to VCR mode  
and start recording.  
The DVD+VCR will automatically power off when Timer  
Recording ends.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extending the Recording Time  
Instant Timer Recording  
The recording time can be extended anytime by  
pressing REC (z). Subsequent presses result in  
advancing the recording time by 30-minute  
increments.  
With this feature you can record for a preset length  
without using the program timer.  
1. Turn on DVD+VCR and the TV.  
2. Be sure the TV is tuned to the DVD+VCR output  
channel (CH 3 or 4). If a direct VIDEO/AUDIO  
connection is made between the DVD+VCR and  
the TV, set the TV’s source selector to VIDEO.  
Note:  
If you press PAUSE (X) during instant timer recording, the  
instant timer recording is cancelled. It goes to normal  
recording PAUSE mode.  
3. Insert a video cassette with the safety tab intact.  
4. Select the desired channel using CH -/+ or the  
number buttons (0-9). The channel number  
appears on the TV screen. If you are recording  
from another source via audio/video input jacks  
(at the rear or front panel), select LINE1 (rear  
jacks) or LINE2 (front jacks) by using AUX.  
Recording from External  
Components  
You can record from an external component, such as  
a camcorder or VCR, connected to any of the  
DVD+VCR’s external inputs.  
5. Set the desired recording speed (SP or SLP)  
using SPEED. The tape speed appears on the TV  
screen.  
1. Make sure that the component you want to record  
from is connected properly to the DVD+VCR.  
See page 13.  
6. Press REC (z) twice. The menu appears on the  
TV screen, recording starts, and the  
(TIMER)  
2. Press AUX repeatedly to select the external input  
indicator lights.  
to record from.  
INSTANT TIMER RECORD  
LINE1 (L1): Audio/Video Input mounted on  
back panel.  
CHANNEL  
SPEED  
2
LINE2 (L2): Audio/Video Input mounted on  
SP  
front panel.  
START  
NOW  
3. Load a recordable tape.  
LENGTH  
0H30M  
4. Set a recording mode (SP or SLP) as necessary  
by pressing SPEED repeatedly.  
7. Press REC (z) repeatedly to select the recording  
time length. Each time you press this button the  
recording time increases 30 minutes (up to 9  
hours). At the end of the recording, the DVD+VCR  
will stop recording and shut off.  
5. Play the tape or disc in the external component.  
If you have a TV attached to your DVD+VCR,  
you can see the video palying.  
6. Press REC (z) once to start recording.  
The REC indicator lights in the display window.  
If you set the time to 0H00M, the DVD+VCR goes  
into the normal recording mode. Press STOP (x)  
to stop the recording.  
7. Press STOP (x) to stop recording.  
Notes:  
Before recording, confirm the recording start position.  
Checking the Recording Time  
If your source is copy-protected using CopyGuard, you  
will not be able to record it using this unit. See Copyright  
on page 7 for more details.  
To record for a fixed length of time, see Instant Timer  
Recording.  
Press REC (z) once to check the recording time.  
The recalled setting automatically returns to the TV  
screen after 6 seconds.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Each press of ENTER/OK changes the TV screen in  
the following sequence.  
Copying from DVD to VCR  
You can copy the contents of a DVD to a VHS tape.  
STOP  
SP  
CH  
STEREO  
4
1. Insert the disc you wish to copy into the DVD  
deck and close the disc tray.  
APR 30 , SAT  
2:15 PM  
2. Insert a blank VHS video tape into the VCR deck.  
2:15 PM  
3. Find the place on the DVD from which you want  
to start dubbing using the PLAY, FF, REW and  
PAUSE functions.  
0:35:40  
REM 1:58  
For best results, pause playback at the point from  
which you want to record.  
Real-Time Counter  
4. Press REC z. The DVD goes into PLAY mode  
and the VCR goes into RECORD mode. If the  
DVD disc menu appears, you may need to press  
PLAY (N) manually to begin copying.  
If a tape with contents recorded on it is inserted into  
the VCR, the real-time counter shows length of the  
tape running in hours, minutes, and seconds. Press  
DISPLAY to select the real-time counter display.  
Every press of DISPLAY changes the TV screen as  
illustrated below.  
5. When the DVD is finished playing, press STOP  
(x) to end copying.  
Notes:  
2:15 AM  
0:05:25  
REM 1:07  
If the DVD you are attempting to copy is copy protected,  
you will not be able to copy the disc. It is not permitted  
to copy Macrovision encoded DVDs (or Discs). “Lock” is  
displayed in the display window.  
Counter Memory  
This feature is useful if there is a section of tape you  
want to view immediately after recording or if you  
want to return to the same point several times.  
You must stop the copy process manually when the  
DVD movie ends, or the unit may replay and record over  
and over again.  
1. Begin recording or playing a tape.  
When you stop the DVD playback during copying, the  
2. Press DISPLAY until the real-time counter is  
recording on VCR is stopped automatically.  
displayed on the TV screen.  
The mark of DVD playback will be recorded at the  
beginning of the copied tape.  
If you press DISPLAY during copying the on-screen  
display will be recorded on the copied tape. Do not  
press any button on the remote control except when you  
want to stop copying.  
During this recording, do not operate the REW and FF  
functions. Otherwise it would record the fast moving  
picture without sound on the tape.  
3. At the point that you want to locate later, reset the  
real-time counter to “0:00:00” by pressing CLEAR  
(0000).  
4. Continue to play or record.  
5. Press STOP (x) when recording or playback  
finishes.  
6. Press REW (m). The tape automatically stops  
when the tape counter returns to about “0:00:00”.  
Tape Remaining  
This function displays the amount of time remaining  
on the tape during recording or playback. Press  
DISPLAY repeatedly until the REM indicator displays  
on the TV screen during recording or playback.  
The remaining tape length may not be displayed  
correctly depending on the condition of the tape and  
the kind of the tape (T-140, T-160, or T-210 etc.).  
On-Screen Display - VCR  
Some of these functions will be displayed every time  
the DVD+VCR is operated.  
PLAY  
SP  
HI-FI  
CH 4  
STEREO  
Notes:  
The function displays can be seen displayed on the TV  
screen for 5 seconds.  
The clock (or tape counter, tape remaining) mode will be  
OCT 8 , SAT  
2:15 PM  
displayed until you press ENTER / OK.  
The tape counter and the remaining tape length  
indicator appear only when a cassette is inserted.  
Also, the remaining tape length indicator appears after  
any tape operation.  
TAPE SPEED DISPLAY  
FUNCTION DISPLAY  
STEREO / SAP DISPLAY  
(MONO is not displayed)  
DATE DISPLAY  
CLOCK / COUNT/  
REMAIN DISPLAY  
HI-FI DISPLAY  
(Only when the HI-FI audio  
sound is recorded)  
CHANNEL DISPLAY  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S-VHS Quasi Playback (SQPB)  
Additional VCR Information  
During manual recording, timer recording, Instant  
Timer Recording, playback, or fast forward  
modes, the DVD+VCR automatically starts  
rewinding the tape at the end of the tape. The  
cassette stops at the beginning of the tape and is  
ejected.  
This DVD+VCR can play back S-VHS recorded  
tapes, however, it cannot record video on S-VHS  
format.  
SQPB is an abbreviation for S-VHS Quasi  
Playback.  
Note:  
After you have finished using the DVD+VCR,  
rewind, eject, and remove the cassette. Place the  
cassette in its protective sleeve to protect it from  
dust. It is not necessary to rewind the cassette  
before removing it, but if you do, it is ready to play  
or record the next time you use it.  
Playback picture of SQPB may be distorted in the following  
cases:  
When starting playback.  
When changing the playback mode between forward or  
reverse picture search and normal playback.  
When changing the operating deck (VCR or DVD).  
Be sure the DVD+VCR channel selector is on the  
correct channel you wish to record. The channel  
that is being recorded can always be checked by  
setting the television on the DVD+VCR channel  
(CH 3 or 4) and pressing the TV/VCR to turn the  
DVD+VCR’s TV indicator off.  
Easy Information  
If the Extended Data Service (XDS) signals are  
provided along with normal TV signal in your area or  
during playback of a tape recorded with Extended  
Data Service (XDS) signals, the station ID, program  
title, and program details are shown on the TV screen.  
When viewing a channel with Extended Data Service  
(XDS) signals, press ENTER / OK and the station ID  
will appear on the TV screen. Press ENTER / OK  
again and the program details will appear on the TV  
screen.  
Do not attempt to hook up more than one televi-  
sion set to the DVD+VCR for either recording or  
playback.  
When viewing a tape recorded with Extended Data  
Service (XDS) signals, press ENTER / OK twice and  
the program title and program details will appear on  
the TV screen.  
VCR Auto Play System  
This DVD+VCR features automatic playback.  
When you load a tape with the safety tab removed  
the following occurs:  
Program Details  
LENGTH: Indicates the run length of a program.  
TIME REMAINING: Indicates the remaining time of a  
program.  
The Output Source is changed to VCR mode  
automatically.  
RATING: Indicates the rating of the current program  
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The  
rating N/A means that the motion picture ratings are not  
applicable to this program.  
The power turns on automatically and playback begins.  
At the end of the tape, the DVD+VCR stops, then  
rewinds.  
CH  
4
The tape is ejected after rewinding and the turns itself  
off automatically.  
SP  
WABC  
STEREO  
“Home video”  
APR 30 , SAT  
2:15 PM  
Easy Information Screen  
(Station ID)  
Note:  
Auto power off does not function during regular DVD play  
mode. (DVD+VCR power stays on.)  
PROGRAM DETAILS  
“Home video”  
LENGTH 01:00  
TIME REMAINING 00:26  
RATING N/A  
Easy Information Screen  
(Program details)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Features  
Playing a DVD or Video CD  
Note:  
Playback Setup  
Unless stated otherwise, all operations described use the  
Remote Control. Some features may also be  
available on the Setup menu.  
1. Turn on the TV and select the video input source  
connected to the DVD+VCR.  
2. Turn on the audio system (if applicable) and select  
the input source connected to the DVD+VCR.  
DVD  
Moving to another TITLE  
3. Press OPEN/CLOSE (Z) to open the disc tray and  
load your chosen disc in the tray, with the play-  
back side down.  
4. Press OPEN/CLOSE (Z) to close the tray.  
Playback starts automatically. If playback does not  
start, press PLAY (N).  
When a disc has more than one title, you can move to  
another title. Press DISPLAY and select desired title  
by using number (0-9) or b / B then press ENTER /  
OK to move to another title.  
DVD  
VCD  
Moving to another CHAPTER  
In some cases, the disc menu might appear  
instead.  
When a title on a disc has more than one chapter, you  
can move to another chapter as follows:  
5. To stop the playback, press STOP (x).  
The unit records the stopped point, depending on  
the disc. “Xx” appears on the screen briefly.  
Press PLAY (N) to resume playback (from the  
scene point). If you press STOP (x) again or  
unload the disc (“x” appears on the screen.), the  
unit will clear the stopped point.  
Press SKIP (> or .) briefly during playback  
to select the next chapter or to return to the  
beginning of the current chapter.  
Press SKIP (.) twice in quick successions to  
step back to the previous chapter.  
Press OPEN/CLOSE (Z) to remove the disc.  
Press OPEN/CLOSE (Z) to close disc tray or  
press POWER 1/:, the disc tray closes automati-  
cally and unit turns off.  
To go directly to any chapter during DVD playback,  
press DISPLAY and press v / V to select the  
chapter icon. Input the chapter number (0-9) or  
use b / B.  
If a menu screen is displayed  
The menu screen may be displayed first after loading  
a DVD which offer a menu.  
DVD  
VCD  
Search  
1. Press PAUSE (X) during playback.  
The DVD+VCR will now go into PAUSE mode.  
DVD  
2. Use FF (M) to select the required speed:  
Use the b B v V buttons to select the title/chapter  
you want to view, then press ENTER / OK to start.  
Press TITLE or DISC MENU to return to the menu  
screen.  
T 1/7, T 1/6, T 1/4, or T 1/2 (forward).  
3. To exit Slow Motion mode, press PLAY (N).  
Note:  
Slow motion playback in reverse is not possible.  
VCD  
Use the number buttons to select the track you want  
to view and press RETURN to return to the menu  
screen. Menu settings and operating  
procedures may differ. Follow the instructions on each  
menu screen. You also may set PBC to Off (See  
“PBC” on page 19).  
Note:  
DVDs may have a region code. Your player will not  
play discs that have a region code different from your  
player. The region code for this player is 1 (one).  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Still Picture and Frame-by-Frame Playback  
DVD  
VCD  
Repeat  
DVD  
VCD  
You can repeat a title/chapter on a disc.  
Press REPEAT during playback to select a desired  
repeat mode.  
1. Press PAUSE (X) during playback. Advance the  
picture frame-by-frame by pressing PAUSE (X)  
repeatedly.  
DVD Video Discs - Repeat Chapter / Title / Off  
• Chapter: repeats the current chapter.  
• Title: repeats the current title.  
2. To exit still motion mode, press PLAY (N).  
• Off: does not play repeatedly.  
DVD  
VCD  
Search  
Video CDs - Repeat Track / All / Off  
• Track: repeats the current track.  
• All: repeats all the tracks on a disk.  
• Off: does not play repeatedly.  
1. Press REW (m) or FF (M) during playback.  
2. Press REW (m) or FF (M) repeatedly to select  
the required speed.  
DVD: X2, X4, X16 or X100  
VCD: X2, X4 or X8  
Notes:  
On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use this function (See “PBC” on page  
19).  
3. To exit SEARCH mode, press PLAY (N).  
DVD  
VCD  
Time Search  
If you press > once during Repeat Chapter (Track)  
playback, the repeat playback cancels.  
To start playing at any chosen time on the disc:  
DVD  
VCD  
Repeat A-B  
1. Press DISPLAY during playback. The time search  
box shows the elapsed playing time.  
To repeat a sequence.  
2. Press v / V to select the time clock icon and  
1. Press REPEAT A-B at your chosen starting point.  
“ A - ” appears briefly on the TV screen.  
“-:--:--” appears.  
3. Input the required start time in hours, minutes,  
and seconds from left to right. If you enter the  
wrong numbers, press CLEAR (0000) to remove  
the numbers you entered. Then input the correct  
numbers.  
2. Press REPEAT A-B again at your chosen end  
point.  
“A - B” appears briefly on the TV screen and the  
repeat sequence begins.  
4. Press ENTER / OK to confirm. Playback starts  
3. Press REPEAT A-B again to cancel.  
from the selected time.  
DVD  
VCD  
Zoom  
DVD  
VCD  
Marker Search  
To enter a Marker  
Use zoom to enlarge the video image.  
1. Press ZOOM during playback or still playback to  
activate the Zoom function. The square frame  
appears briefly in the right bottom of the picture.  
2. Each press of ZOOM changes the TV screen in  
the sequence: 100% size 150% size →  
200% size 300% size 400% size →  
100% size  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears  
on the TV screen briefly. Repeat to enter up to nine  
markers.  
To Recall or Clear a Marked Scene  
3. Use the b B v V buttons to move through the  
zoomed picture.  
1. During disc playback, press SEARCH.  
4. To resume normal playback, press ZOOM  
The marker search menu appears on the screen.  
repeatedly or CLEAR (0000) button.  
2. Within 10 seconds, press b / B to select a marker  
Note:  
number that you want to recall or clear.  
Zoom may not work on some DVDs or VCDs.  
3. Press ENTER / OK and playback starts from the  
marked scene. Or, Press CLEAR (0000) and the  
marker number is erased from the list.  
4. You can play any marker by inputting its number  
on the marker search menu.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCD  
Special DVD Features  
Changing the Audio Channel  
Press A.MONITOR repeatedly during playback to  
hear a different audio channel (Stereo, Left, Right).  
Checking the contents of DVD discs:  
Menus  
DVDs may offer menus that allow you to access  
special features. To use the disc menu, press DISC  
MENU. Input the corresponding number or use the  
b B v V buttons to highlight your selection. Then  
press ENTER / OK.  
DVD  
VCD  
CD  
Last Scene Memory  
This player memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the player or switch  
off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
DVD  
Title Menu  
1. Press TITLE. If the current title has a menu, the  
menu appears on the screen. Otherwise, the disc  
menu may appear.  
Note:  
This player does not memorize the scene of a disc if you  
switch off the player before commencing to play the disc.  
2. The menu offers features such as camera angles,  
spoken language and subtitle options,  
and chapters for the title.  
Screen Saver  
3. Press TITLE to exit.  
The screen saver appears when you leave the  
DVD+VCR in Stop mode for about five minutes.  
DVD  
Disc Menu  
Press DISC MENU and the disc menu is displayed.  
Press DISC MENU again to exit.  
Note:  
If here the sound from line out (or RF out) only, do not  
select the dts sound; there is no audio from line out (or RF  
out) when select the dts sound mode.  
DVD  
Camera Angle  
If the disc contains scenes recorded at different  
camera angles, you can change to a different camera  
angle during playback. Press ANGLE repeatedly  
during playback to select a desired angle. Note that  
the number of the current angle appears on the  
display.  
Tip:  
The Camera Angle icon is displayed on the TV screen when  
alternate angles are available.  
DVD  
Changing the Audio Language  
Press A.MONITOR repeatedly during playback to  
hear a different audio language or audio track.  
DVD  
Subtitles  
Press SUBTITLE repeatedly during playback to see  
the different subtitle languages.  
Note:  
If there is no information,  
is displayed.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display - DVD  
Maintenance and Service  
You can display the general playback status on the  
TV screen. Some items can be changed using the  
menu. To use the on-screen display:  
Refer to the information in this chapter before  
contacting a service technician.  
1. Press DISPLAY during playback.  
Handling the Unit  
2. Press v / V to select an item.  
When shipping the unit  
The selected item is highlighted.  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
3. Press b / B to change the setting. You can also  
use the number buttons if appropriate (e.g.  
inputting the title number). For some functions,  
press ENTER / OK to execute the setting.  
Keeping the exterior surfaces clean  
Notes:  
Some discs may not provide all of the features shown  
below.  
Do not use volatile liquids such as insecticide  
spray near the unit.  
If no button is pressed for 10 seconds, the on-screen  
display disappears.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
If  
is displayed, action prohibited or not available.  
Cleaning the unit  
Example: On-Screen Display during  
playing DVD Video  
To clean the player, use a soft, dry cloth.  
If the surfaces are extremely dirty, use a soft cloth  
lightly moistened with a mild detergent solution.  
Items  
Selection Method  
b / B, Numbers  
Title Number  
ENTER / OK  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
b / B, Numbers  
Chapter Number  
Time search  
ENTER / OK  
Numbers,  
ENTER / OK  
Maintaining the Unit  
The DVD+VCR is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an Audio CD or MP3  
Disc  
MP3 disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 8 - 48 kHz (MP3)  
• Bit rate: within 32 - 320kbps (MP3)  
• The player cannot read an MP3 file that has a file  
extension other than “.mp3”.  
Audio CD  
Once you insert an Audio CD a menu appears on the  
TV screen. Press v / V to select a track then press  
PLAY (N) or ENTER / OK and playback starts.  
• CD-R physical format should be ISO 9660  
• If you record MP3 files using software  
that cannot create a file system (eg. Direct-CD)  
it is impossible to playback MP3 files.  
We recommend that you use Easy-CD Creator,  
which creates an ISO 9660 file system.  
• File names should have a maximum of 8 letters  
and must incorporate an .mp3 extension.  
• They should not contain special letters such as  
/ ? * : “ < > l etc.  
• The total number of contens on the disc should  
be less than 1500 files and 300 folders.  
This DVD+VCR requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are  
many different types of recordable disc formats  
(including CD-R containing MP3 files) and these  
require certain pre-existing conditions (see above)  
to ensure compatible playback.  
Customers should note that permission is  
required in order to download MP3 files and  
music from the Internet. Our company has no  
right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
MP3  
1. Press v / V to select a folder, and press ENTER  
to see the folder contents.  
2. Press v / V to select a track then press  
N (PLAY) or ENTER. Playback starts.  
Audio CD and MP3 Disc  
Features  
CD  
MP3  
Pause  
1. Press PAUSE (X) during playback.  
2. To return to playback, press PLAY (N) or press  
PAUSE (X) again.  
ID3 TAG  
• When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY. [ Song, Artist, Album, Comment, Genre ]  
CD  
MP3  
Moving to another Track  
1. Press SKIP (> or .) briefly during  
playback to go to the next track or to return to the  
beginning of the current track.  
• If there is no information, “No ID3 TAG” appear on  
the menu screen.  
2. Press SKIP (.) twice in quick successions to  
go back to the previous track.  
3. You can play any track by inputting its number.  
Tips:  
CD  
MP3  
Repeat Track / All / Off  
If you are in a file list on the “MUSIC” menu and want to  
return to the Folder list, use the v / V to highlight  
You can play a track/all on a disc.  
and press ENTER.  
1. Press REPEAT when playing a disc.  
The repeat icon appears.  
2. Press REPEAT to select a desired repeat mode.  
On a CD with MP3 and JPEG you can switch MP3 and  
JPEG. Press TITLE and “MUSIC” or “PHOTO” word on  
top of the menu is highlighted.  
• Track: repeats the current track.  
• All: repeats all the tracks on a disc.  
• Off(No display): does not play repeatedly.  
Note:  
If you press SKIP (>) once during Repeat Track  
playback, the repeat playback will be cancelled.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
MP3  
Programmed Playback  
Search  
1. Press REW (m) or FF (M) during playback.  
The program function enables you to store your  
favorite tracks from any disc in the player memory.  
A program can contain 30 tracks.  
2. Press REW (m) or FF (M) repeatedly to select  
the required speed:  
X2, X4 and X8 backward or forward.  
1. Insert a disc.  
AUDIO CD or Music menu appears.  
3. To exit SEARCH mode, press PLAY (N).  
2. Press PROGRAM.  
E
The  
mark will appear to the right of the word  
CD  
MP3  
Random  
“Program” on the right side of the menu screen.  
1. Press RANDOM during playback. Random  
Playback begins immediately and “Random”  
appears on the menu screen.  
2. To return to normal playback, press RANDOM  
repeatedly until “Random” disappears from the  
menu screen.  
Tip:  
By pressing SKIP (> or .) during random playback,  
the unit selects another track and resumes random play-  
back.  
Audio CD Program Menu  
CD  
MP3  
Repeat A-B  
1. To repeat a sequence during disc playback press  
REPEAT A-B at your chosen starting point.  
The Repeat icon and “A -” appear on the menu  
screen.  
2. Press REPEAT A-B again at your chosen end  
point. The Repeat icon and “A-B” appear on the  
menu screen, and the sequence begins to play  
repeatedly.  
3. To exit the sequence and return to normal play,  
press REPEAT A-B again. The Repeat icon disap-  
pears from the menu screen.  
MP3 Program Menu  
Note:  
E
Press PROGRAM again, the  
mark will disappear to  
exit the Program Edit mode.  
3. Select a track on the “List”, then press ENTER /  
OK to place the selected track on the “Program”  
list. Repeat to place additional tracks on the list.  
4. Press B.  
Select the track you want to start playing on the  
“Program” list.  
5. Press PLAY (N) or ENTER / OK to start.  
Playback begins in the order in which you  
programmed the tracks. Playback stops after all  
of the tracks on the “Program” list have played  
once.  
6. To resume normal playback from programmed  
playback, select a track of AUDIO CD or Music  
list and then press PLAY (N).  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat Programmed Tracks  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
2. Press REPEAT to select a desired repeat mode.  
• Track: repeats the current track  
• All: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
Note:  
If you press SKIP (>) once during Repeat Track playback,  
the repeat playback will be cancelled.  
Erasing a Track from “Program” List  
E
1. During STOP mode, press PROGRAM and  
mark will appear.  
2. Use B / v / V to select the track that you wish to  
erase from the Program list.  
3. Press CLEAR (0000). Repeat to erase additional  
tracks on the list.  
Erasing the Complete Program List  
E
1. During STOP mode, press PROGRAM and  
mark will appear.  
2. Use B / v / V to select “Clear All” in the “Program”  
list, then press ENTER / OK.  
Note:  
The programs are also cleared when the disc is removed.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JPEG  
Slide Show  
Viewing a JPEG Disc  
Use v V b B to highlight the  
(Slide Show) then  
Using this DVD+VCR you can view discs with JPEG  
files.  
press ENTER / OK.  
1. Insert a disc and close the tray.  
JPEG  
Still Picture  
The PHOTO menu appears on the TV screen.  
1. Press PAUSE (X) during slide show.  
The player will now go into PAUSE mode.  
2. To return to the slide show, press PLAY (N)  
or press PAUSE (X) a gain.  
JPEG  
Moving to another File  
Press SKIP (> or .) or cursor (b or B) once  
while viewing a picture to advance to the next or  
previous file.  
JPEG  
Zoom  
2. Press v / V to select a folder, and press  
ENTER / OK. A list of files in the folder appears.  
If you are in a file list and want to return to the  
previous Folder list, use the v / V buttons on the  
Use zoom to enlarge the photo image. (see page 28)  
JPEG  
To rotate picture  
Press v / V during showing a picture to rotate the  
remote to highlight  
and press ENTER / OK.  
picture clockwise or counter clockwise.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER / OK or PLAY  
(N). The selected file will appear for viewing.  
While viewing a file, you can press STOP (x) to  
move to the previous menu (PHOTO menu).  
JPEG disc compatibility with this player is  
limited as follows:  
Tips:  
• Depending upon the size and number of JPEG  
files, it could take a long time for the DVD+VCR  
to read the disc’s contents. If you don’t see an  
on-screen display after several minutes, some of  
the files may be too large — reduce the resolution  
of the JPEG files to less than 5760 (Horizontal) x  
3840 (Vertical) pixels and burn another disc.  
Information and user guidance regarding the current  
image is displayed in the lower part of the screen. You  
can toggle this bar on and off using RETURN (O).  
There are three Slide Speed options  
>>> (Fast), >> (Normal) and > (Slow)  
:
Use v V b B to highlight the Speed. Then,  
use b / B to select the option you want to use then  
press ENTER / OK.  
• The total number of contents on the disc should  
be less than 1500 files and 300 folders.  
• Some discs may be incompatible due to a  
different recording format or the condition of disc.  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
• If the files have “.jpe” or “.jpeg” extensions,  
please rename them as “.jpg” file.  
• File names without “.jpg” extension will not be  
able to be read by this DVD+VCR. Even though  
the files are shown as JPEG image files in  
Windows Explorer.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Language Codes List  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Ameharic  
Arabic  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Rhaeto-Romance 8277  
Rumanian  
Russian  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Danish  
Sanskrit  
Dutch  
Korean  
Scots Gaelic  
Serbian  
Wolof  
English  
Kurdish  
Laothian  
Latin  
Xhosa  
Esperanto  
Estonian  
Faroese  
Serbo-Croatian  
Shona  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Sindhi  
Area Codes List  
Choose an area code from this list.  
Area  
Code  
Area  
Code  
ET  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
AF  
Ethiopia  
Malaysia  
Maldives  
Mexico  
AR  
AU  
AT  
Fiji  
FJ  
Finland  
France  
FI  
Singapore  
Slovak Republic  
Slovenia  
FR  
DE  
GB  
GR  
GL  
Monaco  
Mongolia  
Morocco  
Nepal  
Belgium  
Bhutan  
BE  
BT  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
Germany  
Great Britain  
Greece  
Greenland  
South Africa  
South Korea  
Spain  
ZA  
Bolivia  
Brazil  
KR  
ES  
LK  
Netherlands  
NL  
Cambodia  
Canada  
Chile  
Herd and Mcdonald Islands HM  
Netherlands Antilles AN  
Sri Lanka  
Sweden  
Hong Kong  
Hungary  
India  
HK  
HU  
IN  
New Zealand  
Nigeria  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
PT  
RO  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Switzerland  
Taiwan  
China  
Norway  
Oman  
Colombia  
Congo  
Indonesia  
Israel  
ID  
Thailand  
IL  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Turkey  
Costa Rica  
Croatia  
Italy  
IT  
Uganda  
Jamaica  
Japan  
JM  
JP  
KE  
KW  
LY  
LU  
Ukraine  
Czech Republic  
Denmark  
Ecuador  
Egypt  
United States  
Uruguay  
Kenya  
Kuwait  
Portugal  
Romania  
Russian Federation RU  
Uzbekistan  
Vietnam  
Libya  
El Salvador  
Luxembourg  
Zimbabwe  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Symptom  
No power.  
Cause  
Correction  
The power cord is disconnected.  
Plug the power cord into the wall  
outlet securely.  
Refer to page 7.  
The power is on, but  
the DVD+VCR does  
not work.  
DVD or VCR button is not switched  
properly.  
Insert a disc or tape. (Check that the  
disc or tape indicator in the display  
window is lit.)  
No disc is inserted.  
No tape is inserted.  
No picture.  
No sound.  
Select the appropriate video input  
mode on the TV so the picture from  
the DVD+VCR player appears on the  
TV screen.  
The TV is not set to receive DVD+ VCR  
signal output.  
Connect the video cable into the jacks  
The video cable is not connected  
securely.  
securely.  
Check the connection.  
Wrong connection.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD+VCR.  
The equipment connected with the  
audio cable is not set to receive  
DVD+VCR signal output.  
Connect the audio cable into the jacks  
The audio cables are not connected  
securely.  
securely.  
Turn on the equipment connected with  
The power of the equipment connected  
the audio cable.  
with the audio cable is turned off.  
Set the AUDIO options to the correct  
The AUDIO options are set to the  
position.  
wrong position.  
Clean the disc.  
The playback picture is The disc is dirty.  
poor.  
Check tuning, carry out tuning again.  
Clean video heads.  
The TV channels are not tuned in properly.  
Tape heads are dirty.  
Use CH -/+ for manual tracking  
Tape is a rental or was recorded on  
adjustment while tape is playing.  
another VCR.  
Make sure that your TV can support  
525p Progressive scan picture or set  
Progressive scan to off.  
This unit can only output 525p  
Progressive scan picture.  
The “PROGRESSIVE  
SCAN MODE”  
Keep pressing STOP (x) for more  
DVD+VCR was turned off while setting  
than 5 seconds.  
the Progressive scan mode.  
message remains to be  
displayed.  
The Progressive Scan is set to On on  
the setup menu but is connected to a  
standard(analog) television with  
component video input.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Cause  
Correction  
An unplayable disc is inserted.  
Insert a playable disc. (Check the disc  
The DVD+VCR does  
not start playback.  
type and Regional code.)  
Place the disc with the playback side  
The disc is placed upside down.  
down.  
Place the disc on the disc tray correctly  
The disc is not placed within the  
inside the guide.  
guide.  
Clean the disc.  
The disc is dirty.  
Eject the tape in.  
Video tape cannot be  
inserted.  
Is the cassette compartment empty?  
No Hi-Fi sound  
Select STEREO by repeatedly pressing  
Audio mode is not set properly.  
A.MONITOR on the Remote Control.  
The Remote Control  
does not work  
properly.  
Remove the obstacle.  
There is an obstacle in the path of the  
Remote Control and this unit.  
Replace the batteries with new ones.  
The batteries in the Remote Control  
are exhausted.  
Point the remote control at the remote  
The Remote Control is not pointed at  
sensor of the DVD+VCR.  
the remote sensor of the DVD+VCR.  
Operate the remote control within 23ft  
The Remote Control is too far from  
(7m).  
the DVD+VCR.  
When using a VCR, first press the VCR  
button. When using a DVD, first press  
the DVD button.  
This Remote Control use the same  
buttons for VCR and DVD functions  
(ex.PLAY).  
Use the DVD+VCR’s Remote Control.  
The Remote Control of a JVC TV or  
Receiver cannot operate the DVD+  
VCR.  
Camcorder image is  
not shown.  
Turn camcorder on and operate  
Camcorder is off.  
properly.  
Camcorder image via  
AV input to DVD+VCR  
is not shown on TV  
screen.  
Press AUX to select LINE input  
DVD+VCR SOURCE SELECT is not  
channel (LINE1 or LINE2).  
set to LINE1 or LINE2.  
Timer recording is not  
possible.  
Set clock to correct time.  
Reprogram Timer.  
Clock in DVD+VCR is not set to  
correct time.  
Timer has been programmed  
incorrectly.  
Reprogram Timer and turn DVD+VCR  
indicator light does not appear after  
programming timer.  
off to enable timer.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements  
120 V, 60 Hz  
Power consumption  
16 W (POWER ON)  
0.8 W (STANDBY mode)  
16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)  
9.24 lbs (4.2 kg)  
Dimensions (approx.)  
Weight (approx.)  
Operating temperature  
Operating humidity  
Signal system  
5˚C to 40˚C (41˚F to 104˚F)  
5 % to 90 %  
NTSC  
Inputs  
ANTENNA IN  
VHS VIDEO IN(LINE1, 2)  
VHS AUDIO IN(LINE1, 2)  
75 ohms (VHF/UHF/CATV)  
1 V (p-p) 75 ohms, sync negative, RCA jack x 2  
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2  
Outputs  
VIDEO OUT  
COMPONENT VIDEO OUT  
(Progressive scan)  
1 V (p-p) 75 ohms, sync negative  
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2  
0.5 V (p-p), 75 ohms, RCA jack x 1  
Audio output (digital audio)  
Audio output (analog audio)  
RF OUT  
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1  
Channel 3 or 4 (Adjustable)  
VCR Specifications  
Head system  
Timer  
Four head helical scan azimuth system  
12-hour display type with AM, PM  
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec  
12.7 mm  
Tape speed  
Tape width  
Maximum recording time  
Rewind time  
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)  
About 3 minutes (T-120)  
Channel coverage  
Frequency range  
Signal-to-noise ratio  
Dynamic range  
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)  
20 Hz to 20 kHz  
More than 43 dB  
More than 88 dB  
Channel separation  
More than 60 dB  
DVD Specifications  
Laser system  
Semiconductor laser, wavelength 650 nm  
DVD (PCM 96 kHz): 8 Hz to 44 kHz,  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Frequency response  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100 dB (ANALOG OUT jacks only)  
Less than 0.008%  
More than 95 dB (DVD/CD)  
Accessories:  
RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2  
Design and specifications are subject to change without prior notice.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in Indonesia  
0206MNH-LG-LG  
UC  
P/NO : 3834RV0042F  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia Speaker System NS A1112 User Manual
Invacare Mobility Aid F 65 User Manual
JVC Automobile Accessories KS RC110 User Manual
JVC Flat Panel Television GV DT3 User Manual
JVC Stereo Receiver RX 6010VBK User Manual
Kenwood Computer Monitor DDX6029 User Manual
Keys Fitness Treadmill 1350 User Manual
Kicker Stereo Amplifier ZX5001 User Manual
Klipsch Stereo Amplifier 8008 MKII User Manual
Kowa Saw SL 15 User Manual