LCD Monitor
LT-42WX70EU
INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not allow the product to fall!
●Do not rest your elbows on, or allow children to hang from the product.
There is a risk that the product will fall and cause injuries.
●Make use of the hole on the back of the stand to prevent the product
from falling easily. (➔ page vii)
When installing the monitor on the wall, ask your dealer to install.
When installing the product:
●Use the cabinets or stands which are specified or recommended by the
manufacturer.
●Use furniture on which the product can be installed steadily.
●Do not install the product in the way that any part of the product
protrudes from the platform or furniture.
●Do not install the product on tall furniture (bookshelf, cupboard, etc.)
without proper fixing.
●Do not install the product on a furniture-covering cloth or the like.
●
Take care that children do not climb upon furniture to operate the product.
Take care when handling the glossy finish!
●For more details, see page vi.
Handle LCD panel with care!
●Use a soft, dry cloth when cleaning.
Hold the product so as not to scratch the screen!
●Do not touch the screen when carrying the product.
Never place anything on the product!
●Placing liquids, naked flames, cloths, paper, etc. on the product may
cause a fire.
Never expose to rain or moisture!
●To prevent fire or electric shock, never allow liquids to enter the unit.
Never insert objects into the cabinet openings!
●It may cause a fatal electric shock. Take care when children are near.
Never obstruct the ventilation holes!
●It may cause overheating or a fire.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not carry the product on your own!
●In order to prevent accidents, ensure that the product is carried by two
or more people.
On disposal of the product!
●Follow the instruction in “Information for Users on Disposal of Old
Equipment and Batteries”. (➔ page v)
■
Registered trademarks, the model name, and power rating are written
on the labels placed under the terminal cover on the rear of the product.
■For more details on installation, usage and safety, consult your retailer.
Note for United Kingdom power cord only
The plug of United Kingdom power cord has a built-in fuse. When
replacing the fuse, be sure to use only a correctly rated approved type,
re-fit the fuse cover. (Consult your dealer or qualified personnel.)
How to replace the fuse
Open the fuse compartment with the blade
screwdriver, and replace the fuse.
Fuse
For UK only:
If you accidentally cut the power cord
Attach a new plug following the steps below. If in doubt, contact your
local retailer.
Important
●Never connect to the larger terminal marked with an “E”, the safety
earth symbol “ ” or coloured green or green-and-yellow.
●The wires in the mains lead on this product are coloured with the
following code:
●Blue: Neutral wire (connect to the black terminal, or one marked “N”)
●Brown: Live wire (connect to the red terminal, or one marked “L”)
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Information for Users on Disposal of Old
Equipment and Batteries
[European Union]
These symbols indicate that the electrical and
electronic equipment and the battery with this
symbol should not be disposed of as general
household waste at its end-of-life. Instead, the
products should be handed over to the applicable
collection points for the recycling of electrical and
electronic equipment as well as batteries for proper
treatment, recovery and recycling in accordance with
your national legislation and the Directive 2002/96/
EC and 2006/66/EC.
By disposing of these products correctly, you will help
to conserve natural resources and will help to prevent
potential negative effects on the environment and
human health which could otherwise be caused by
inappropriate waste handling of these products.
For more information about collection points and
recycling of these products, please contact your local
municipal office, your household waste disposal
service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
Products
Battery
Notice:
The sign Pb
below the
symbol for
batteries
indicates that
this battery
contains lead.
[Business users]
If you wish to dispose of this product, please visit our web page http://
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment and batteries.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Cleaning the screen
The screen of this monitor is coated with layers of thin films, such as
a coating to prevent unwanted reflections. Damages to these layers
can lead to irreversible changes in appearance such as uneven colour,
discolouration, and scratches. Follow the instructions below to prevent
such troubles.
●Do not paste or stick anything using any glues or adhesive tapes.
●Do not write anything on the screen.
●Do not strike the screen with a hard object.
●Avoid condensation on the screen.
●Do not wipe the screen with solvent such as alcohol, thinner, or
benzine.
●Do not wipe the screen forcefully.
If the screen gets stained, wipe it with a soft dry cloth or a soft cloth
soaked in water or water-diluted neutral detergent and wrung well.
Cleaning the cabinet
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily
stained, wipe it with a soft cloth soaked in water-diluted neutral detergent
and wrung well, then wipe with a soft dry cloth.
To avoid the deterioration or damages of the cabinet such as its paint’s
peeling away, be careful about the following:
●Do not wipe the cabinet using solvent such as alcohol, thinner, or
benzine.
●Do not expose the cabinet to any volatile substance such as
insecticides.
●Do not allow any rubber or plastic in contact for a long time.
●The top of the supplied stand is made of glass. Avoid physical shock and
do not scratch it with hard objects.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Ventilation openings
Use a vacuum cleaner to get rid of the dust on and around the intakes (all
the openings). If a vacuum cleaner is not available, use a cloth and wipe it
off. Leaving the dust around the intakes may prevent proper temperature
control and cause damage to the product.
Keep space around the product as illustrated below at minimum for proper
ventilation.
200 mm
200 mm
150 mm
150 mm
50 mm
50 mm
To prevent an accidental fall
When hanging on a wall
When attaching the monitor onto a wall, use the optional wall mounting
unit.
Consult qualified installers for installation.
When fixing to furniture
1 Thread a belt (not supplied) through the hole on the
back of the stand.
2 Fix the belt to the furniture using a screw.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
› Big screen suitable for SLR digital camera
photographs
➔ page A-11
› Slim cabinet provides you with greater freedom of
choice for installation
› More precise adjustment of picture quality with a
wide range of adjustment properties
› Quick response making video games more exciting
— Game Mode ➔ page A-5
› Operating HDMI devices from the TV remote
➔ page A-2
contoller — HDMI CEC compatible
➔ page 13
02
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04
Included items
04
05
05
05
06
08
10
10
Inserting batteries into the remote control
Attaching and connecting the speaker unit
Installation
To adjust the vertical position of monitor
Connecting external devices
Connecting the power cable/Turning on the power
Initial settings
Parts identification . . . . . . . . . . . . . . . . . . . . . . . . 11
Controlling HDMI devices . . . . . . . . . . . . . . . . . 13
Changing the settings. . . . . . . . . . . . . . . . . . . . . 14
Picture
Sound
Setup
HDMI
15
27
29
36
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Technical information
Customize the picture to your taste. . . . . . . . . . . . . . . A-2
Set up the monitor for your PC . . . . . . . . . . . . . . . . . . . A-10
Enjoy SLR digital camera photographs . . . . . . . . . . . A-11
Menu index by task. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12
You can search for picture/sound menu items from the
adjustment you want to make, and quickly find the page
containing detailed information.
03
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Included items
●Main unit (monitor and stand)
●Speaker unit
●Screws for the speaker unit
●Remote control unit
●AAA size batteries
●Video cable (D-sub 15 pin / RCA)
●Audio cable (3.5 mm stereo mini / RCA)
●Power cable
●Instructions (this book), startup sheet, other printed material
04
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting batteries into the remote control
When replacing the batteries
To avoid short-circuit, place the minus end of the batteries first.
● Batteries shall not be exposed to excessive heat such as direct sunshine, fire or
the like.
● Read the precautions on the battery.
● The batteries last about 6 to 12 months on regular usage.
● The included batteries are supplied for operation check and may last shorter.
Attaching and connecting the speaker unit
Attach the supplied speaker unit under the monitor using the supplied
screws.
● Refer to the startup sheet for details.
● You can also connect speakers other than the supplied one. In this case, set
“PEQ” to “Off”. (➔ page 28)
Impedance: 8 Ω or larger
Rated input power: 10 W or larger
Speaker unit (supplied)
Screws (supplied)
Installation
Install the unit properly referring to the cautions from pages ii to vii.
● Do not hold the speaker unit when carrying the monitor. Hold the stand base
and the upper part of the monitor by two or more people.
05
Download from Www.Somanuals.com. All Manuals Search And Download.
To adjust the vertical position of monitor
The monitor is height-adjustable in 3 positions, by 5.5 cm at the
maximum. Adjust the vertical position of the monitor when you need to
place a device under the monitor.
1 Detach the monitor from the stand.
1-1 Spread a soft cloth on a flat table or floor to place the removed
monitor on.
1-2 Remove the screw connecting
the monitor and the stand.
1-3 Detach the monitor from the
stand.
● The monitor should be carried by
two or more people.
2 Change the position of the hooks.
2-1 Detach the two hooks from the monitor.
Hook (upper)
Hook (lower)
06
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2 Attach the hooks again.
● Select the positions of the hooks according to the monitor position you want,
and fix them with the screws.
Speaker unit
Tuner
x
x
√
x
x
√
√
√
Hook (upper)
Hook (lower)
3 Attach the monitor to the stand.
3-1 Hang the monitor to the
stand.
3-2 Fasten the screw.
● After fastening the screw, swing
the monitor a few times to check
if it is hinged with the stand
properly. After that, fasten the
screw tight again.
● After hanging the monitor on the
stand, swing the monitor from
side to side a few times so that
the hooks on the monitor and
the pivots on the stand engage
properly in position.
07
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
To connect an HDMI device
To INPUT-1/INPUT-2/
INPUT-3 terminals
To connect a device with component terminals
To connect a device with a composite terminal
Green
To connect a DVI device
To connect a computer
08
Download from Www.Somanuals.com. All Manuals Search And Download.
● HDMITM (V.1.3, with Deep Color, with x.v.ColourTM, HDMITM CEC Support)
INPUT-2: HDMITM terminal
INPUT-3: HDMITM terminal
INPUT-4 terminal:
D-sub 15 pin
INPUT-1: HDMITM
terminal
Speaker terminals (➔
page 05)
AUDIO INPUT terminal
RS-232C terminal (For controlling the monitor from a computer.
Contact qualified personnel for detailed information.)
A: Video cable (supplied)
B: Audio cable (supplied)
a: HDMI cable (separately purchased)
b: Component cable (separately
purchased)
d: Video cable (separately purchased)
e: DVI-HDMI cable (separately
purchased)
f: VGA cable (separately purchased)
g: Audio cable (separately purchased)
c: Audio cable (separately purchased)
● When using the INPUT-4 terminal, set “Input-4 Setting” (➔ page 33) properly
according to the connected device.
● To reduce noise, use a VGA cable with core filters.
● When you connect a DVI device to INPUT-2 or INPUT-3, only the video signal is
played back, and the sound signal is not.
09
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the power cable/Turning on the power
Power cable
Power switch
● Ground the earth plug of the
power cable to the earth terminal
of the AC outlet.
● When several kinds of power cord
are provided in the package, use
the one which fits your AC outlet.
Power on
Power off
Initial settings
When you turn on the monitor for the first time, initial settings start. Select
the menu language and the place of installation.
1 Select the menu language.
Interactive Plug-in Menu
1-1 Select “Menu Language” and
Previous 2/4
Menu Language
English(EU)
press the [OK] button.
1-2 Select from the list the language
English(EU)
English(US)
Suomi
Français(EU)
Français(US)
Deutsch
Set
you want using the [
]
Ελληνιά
buttons, and press the [OK]
button.
Magyar
Next
1-3 Select [Set] and press the [OK]
button.
2 Select the place of installation.
2-1 Select “Place of Installation” and press the [OK] button.
2-2 Select the place of installation using the [
the [OK] button.
] buttons, and press
2-3 Select [Set] and press the [OK] button.
● In steps 1-1 and 2-1, you can also select a setting by pressing the [
] buttons.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts identification
Main unit
Power switch (on
Power indicator
Remote sensor
the rear)
Touch sensor panel
Power switch
(on the rear)
Turns on or off the main power supply.
Power indicator Lights while the monitor is on.
Remote sensor Aim the remote control here.
Touch sensor panel
Touch on the function name to operate the function. You hear a beep
sound when the button is touched.
Turns the monitor on/off (on standby).
INPUT
MENU
Switches the input.
Opens the setting menu. Functions as the down cursor
key in the menu operations.
Functions as the left cursor key and the right cursor key
in the menu operations.
Turns down the volume. Functions as the BACK key in
the menu operations.
Turns up the volume. Functions as the OK key in the
menu operations.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Turns the monitor on/off (on
standby).
LINK
Opens the operation window for
HDMI CEC devices. (➔ page 13)
Opens the setup window of HDMI
CEC devices.
Opens the setting menu. (➔ page
14)
OPTION
MENU
Selects an item.
(Cursor keys)
OK
Confirms your selection.
BACK
EXIT
Goes back to the previous screen.
Exits from the menu.
ZOOM
Changes the aspect. (➔ page 30)
Adjusts the volume.
+/–
Attenuates the sound.
INPUT 1
INPUT 2
INPUT 3
INPUT 4
Switches the input.
● Buttons not mentioned above are equipped for the
operations of a TV tuner.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling HDMI devices
You can control HDMI CEC devices connected to this monitor using the
remote of the monitor.
● This function can be customized in the “HDMI” settings (➔ page 36).
● Devices may not operate or may function differently from described,
depending on the model or the manufacturer.
Link >Recorder
1 Press the [LINK] button.
Input-1
Device
Rec.
Operation window appears.
Rec.Stop
2 Select the device to control.
NAVIGATION
Function
Operation Panel
Select the device name under “Device”.
Speaker
Exit
Monitor
3 Control the selected HDMI device.
● “Rec.” : Starts recording.
Operate
Select
● ”Rec.Stop” : Stops recording.
● “NAVIGATION” : Opens the playback menu of the HDMI device.
● “Function” : Opens the operation menu of the HDMI device.
● “Operation Panel” : Opens the operation panel.
To select the audio output
When an HDMI CEC amplifier is connected to the monitor, you can select
either the monitor or the amplifier as the device to output the sound
signal.
● To output the sound from the amplifier, set “AMP Control” (➔ page 37) to “On”,
and connect the audio output terminals of the player into the amplifier.
1 Press the [LINK] button.
2 Select “Monitor” or “AMP” under “Speaker”.
● “Monitor” : The sound is output from the monitor. The volume buttons of the
monitor control the volume of the monitor.
● “AMP” : The sound is output from the amplifier. The volume buttons of the
monitor control the volume of the amplifier.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings
Example: to change the setting of “Colour Temperature”
1 Open the menu.
Picture
Page 1/3
Memory1
Setting Memory
Load Preset
Hue
0
Hue Setting
Colour
Contrast
Contrast Setting
Brightness
Sharpness
2 Select “Picture”.
0
0
0
0
3 Select “Colour Temperature”.
● The item currently selected is shown in orange.
4 Select the setting you want.
● When the selected item is followed by an adjustment screen, press the
] buttons to make adjustments.
[
Picture
Sound
Setup
HDMI
➔ page 15
➔ page 27
➔ page 29
➔ page 36
5 Finish the setting.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical information
Customize the picture to your taste A-2
Set up the monitor for your PC
A-10
Enjoy SLR digital camera photographs
A-11
Menu index by task
A-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Customize the picture to
your taste
To use a preset
1 Open the menu.
2 Select a memory from “Setting Memory” in “Picture”.
In the initial setting, 6 presets are assigned to each memory as follows:
● Memory1 : Standard
● Memory2 : Dynamic
● Memory3 : Theater
Picture
Page 1/3
Memory1
● Memory4 : Monitor
● Memory5 : Photo Pro
● Memory6 : Game
Setting Memory
Load Preset
Hue
Hue Setting
Colour
0
0
0
Contrast
Contrast Setting
Brightness
Sharpness
● See page A-4 for the detail of
each preset.
0
0
● If you have modified the settings
(➔ next page), the settings of
each memory are different from the default.
● When the input is changed, the memory used for the input last time is
automatically applied.
A-2
Download from Www.Somanuals.com. All Manuals Search And Download.
This monitor features rich menus for picture control, in addition to 6 pre-
installed sets of picture settings carefully prepared by JVC to suit various
types of video content and viewing environment.
Enjoy controlling appearance of pictures using the “Picture” menu, and
create your own picture settings.
Customizing the settings
You can create your own set of picture settings by arranging the settings of
a preset. Storing several sets of settings helps you to enjoy a picture in the
taste you like according to the viewing environment and characteristics of
the source.
1 Open the menu.
2 Select the memory you want to adjust from “Setting
Memory” in “Picture”.
3 Adjust items in “Picture”.
➔ See pages 16 and later for the detail of menu items.
● Adjustments are stored into the selected memory as you change the settings.
● To make another set of picture settings, select another memory in step 2
above and start adjustments.
To reset the settings
If you do not like your current adjustments, load either of the preset settings
into the memory which you want to reset. Settings of the selected memory
are overwritten by those of the loaded preset setting.
1 Open the menu.
2 Select the memory you want to reset from “Setting Memory” in
“Picture”.
3 Select “Load Preset”, select one of the preset settings, and press
“Load”.
A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
●Characteristics of the 6 presets
A-4
Download from Www.Somanuals.com. All Manuals Search And Download.
➔ See the following pages for the setting values of each preset.
A-5
Download from Www.Somanuals.com. All Manuals Search And Download.
●Setting values of each preset
● The settings are subject to change for amelioration.
Standard
Dynamic
Hue
0
0
Hue Setting
BY Gain
BY/RY Angle
Colour
2
2
0
0
2
0
5
4
Contrast
Contrast Setting
Black Stretch
Dynamic DC Offset
Auto Contrast
Brightness
Medium
On
Off
0
High
On
On
0
Sharpness
0
10
Enhancer
Mode-3
Mode-3
Enhancer Setting
Detail
H.Sharp
V.Sharp
Backlight
–5
10
10
10
0
15
15
30
Backlight Setting
Smart Picture
Dynamic Backlight
Colour System
Colour Matrix
Colour Space
Colour Temperature
On
Medium
Auto
Auto
Auto
Off
High
Auto
Auto
Auto
Cool2
Normal
A-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Theater
Monitor
Photo Pro
Game
0
0
0
0
0
2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Low
On
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
0
0
0
0
0
–30
Mode-5
0
–15
Mode-5
Mode-4
Mode-5
0
5
0
0
0
0
0
0
–15
–5
0
0
0
0
10
10
On
Off
Off
On
Low
Off
Off
Off
Auto
Auto
Normal
Warm2
Auto
Auto
Normal
Warm2
Auto
Auto
sRGB
Warm2
Auto
Auto
Auto
Cool2
A-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard
Dynamic
White Balance Setting
R Drive / G Drive / B Drive
R Cutoff / G Cutoff / B Cutoff
Colour Management
Colour Mngmt. Setting
Red Hue / Red Colour
Yellow Hue / Yellow Colour
Green Hue / Green Colour
Cyan Hue / Cyan Colour
Skin Hue / Skin Colour
Colour : Bright Area
Colour : Dark Area
Gamma
0
0
0
0
Mode-2
Mode-1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Mode-2
Medium
Mode-1
High
Picture Management
Noise Reduction
Digital VNR
MPEG NR
3DY/C
Auto
Low
On
Auto
Low
On
Natural Cinema
Auto
Normal
Off
Auto
Normal
Off
Picture Delay Time
PC Monitor Mode
Eco Mode
Off
Off
Other
Real Bit Driver
100/120Hz CMD
On
On
On
On
A-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Theater
Monitor
Photo Pro
Game
0
0
0
0
0
0
0
0
Mode-3
Off
Off
Mode-2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Mode-4
Low
Mode-4
Off
Mode-4
Off
Mode-3
Medium
Auto
Low
On
Off
Off
Off
Auto
Off
On
Auto
Low
On
Auto
Normal
Off
Off
Normal
Off
Off
Normal
Off
Off
Middle
Off
Off
Off
Off
Off
On
On
On
On
On
Off
On
On
A-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up the monitor for your
PC
Selecting the input signal
When you connect a PC to the INPUT-4 terminal, set the type of the input
signal accordingly.
●For signals in VGA60 and XGA60
Set “Sampling Mode” to “Std”. (➔ page 34)
●For signals in WVGA60
Set “Sampling Mode” to “Wide”. (➔ page 34)
●For signals in WXGA (1280), WXGA (1360) and WXGA60
1 Set “Sampling Mode” to “Wide”. (➔ page 34)
2 Set “WXGA Select” as follows. (➔ page 34)
● For signals in WXGA (1280): “1280*768”
● For signals in WXGA (1360): “1360*768”
● For signals in WXGA60: “1366*768”
●For signals in SXGA60
Set “SXGA / SXGA+” to “SXGA”. (➔ page 34)
●For signals in SXGA+60
Set “SXGA / SXGA+” to “SXGA+”. (➔ page 34)
A-10
Download from Www.Somanuals.com. All Manuals Search And Download.
If the picture is not aligned vertically, or letters on the screen look
blurred
Set the aspect to “1:1”, and adjust “Dot Clock” and “Clock Phase”. (➔ page
35)
● For signals in 1920 x 1080, set the aspect to “Full” and adjust the same items.
If the picture is cropped, or extra margins are displayed around it
1 Set the aspect to “Full”.
2 Adjust the position of the picture using “PC Position Adjustment”
until the upper left corner of the picture is positioned at the upper
left corner of the display.
3 Adjust the size of the picture using “H Size” and “V Size” until the
bottom right corner of the picture is positioned at the bottom right
corner of the display.
Enjoy SLR digital camera
photographs
When you select the picture preset of “Photo Pro” in “Setting Memory”, you
can view the photographs just the way they were taken.
For JPEG pictures, select “sRGB” or “AdobeRGB” under the setting of “Colour
Space” (➔ page 20) according to the setting of your camera, so that the
photographs are displayed more faithfully to the original.
● In the factory default, “Photo Pro” is intalled in “Memory5” of “Setting Memory”.
(➔ page A-2)
● It is recommended not to modify the settings of “Photo Pro”. In the initial
setting of “Photo Pro”, “Colour Space” is set to “sRGB”.
A-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu index by task
Page
General tone of colour
Hue
16
21
21
20
16
Tone of colour (including white)
Tone of colour (in detail)
Range of colour representation
Amplitude of the colour difference
signal
Colour Temperature
White Balance Setting
Colour Space
Hue Setting › BY Gain
Demodulation angle of the colour
difference signal
16
Hue Setting › BY/RY Angle
Pattern of colour correction
Colour correction (in detail)
Colour Management
Colour Mngmt. Setting › Red Hue,
Yellow Hue, etc.
22
22
Total density of colour
Amplitude of the colour difference
signal
Colour
Hue Setting › BY Gain
16
16
Demodulation angle of the colour
difference signal
16
Hue Setting › BY/RY Angle
Pattern of colour correction
Colour correction (in detail)
Colour Management
Colour Mngmt. Setting › Red Colour,
Yellow Colour, etc.
22
22
Total brightness of pictures
Backlight
18
19
19
26
Reduces backlight in bright scenes
Reduces backlight in dark scenes
Adjusts backlight depending on the
luminance of the room
Backlight Setting › Smart Picture
Backlight Setting › Dynamic Backlight
Eco Mode
Total brightness of pictures
Brightness
Contrast
17
17
17
17
17
23
23
18
Adjusts the gain of the signal level
Emphasizes darker areas automatically
Reduces brightness in bright scenes
Emphasizes bright areas automatically
Gamma correction value
Contrast Setting › Black Stretch
Contrast Setting › Dynamic DC Offset
Contrast Setting › Auto Contrast
Gamma
Picture Management
Sharpness
Adjusts gamma value automatically
Sharpness
Sharpness (in detail)
Enhancer Setting
Enhancer
18
18
Frequency band to enhance
Bass sound
Treble sound
Equalizer suited for the speakers
Adjusts the delay time of sound
Bass
Treble
PEQ
27
27
28
27
Lip Sync
A-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture
Setting Memory
You can store up to 6 sets of the “Picture” settings and use them.
● When the input is changed, the memory used for the input last time is
automatically applied.
■ Memory1 / Memory2 / Memory3 / Memory4 / Memory5 /
Memory6
Load Preset
You can load one of the presets below into a memory.
You can do further adjustment based on the loaded settings.
● Select a preset and press “Load” to load a preset.
■ Dynamic : Makes pictures colorful and bright, suitable for watching in
a well-lighted room.
■ Standard : Suitable for watching TV programs and DVDs in a living
room.
■ Theater : Suitable for watching cinemas in a dark room.
■ Monitor : Applies no colour corrections or noise reductions. Input
video signals are displayed as they are.
■ Photo Pro : Suitable for watching still pictures.
■ Game : Gives priority to the response time for picture movement.
Suitable for playing video games.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Hue
Adjusts the tone of colour.
■ –30 – +30 (Skin colour reddish ↔ Skin colour greenish)
Hue Setting
Adjusts the tone of colour in detail.
● The setting is fixed to 0 and unadjustable when “Colour Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Colour”.
● The setting is fixed to 0 and unadjustable when “Colour Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
● The setting is fixed to 0 and unadjustable when “PC Monitor Mode” is set to
“On”.
◆BY Gain
Adjusts the amplitude of the B-Y colour difference signal. You can
modify the total colouring of the picture.
■ –30 – +30 (Small amplitude ↔ Large amplitude)
◆BY/RY Angle
Adjusts the demodulation angle between the B-Y colour difference
signal and the R-Y colour difference signal. You can modify the total
colouring of the picture.
■ –15 – +15 (Decreasing the angle ↔ Increasing the angle)
Colour
Adjusts the density of colour.
■ –30 – +30 (Dilute ↔ Dense)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Contrast
Adjusts the brightness of brighter areas of pictures.
■ –30 – +30 (Dark ↔ Bright)
Contrast Setting
Adjusts settings of functions relating with contrast.
● The functions are not available when “Colour Space” is set to “sRGB” or
“AdobeRGB”.
● The functions are not available when “PC Monitor Mode” is set to “On”.
◆Black Stretch
Emphasizes darker areas depending on the characteristics of a picture
to make contrast clearer.
■ High / Medium / Low / Off
◆Dynamic DC Offset
Controls the blackness of the picture automatically depending on the
total brightness.
■ On / Off
◆Auto Contrast
Emphasizes brighter areas depending on the characteristics of a picture
to make contrast clearer.
■ On / Off
Brightness
Adjusts blackness.
■ –30 – +30 (Dark ↔ Bright)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Sharpness
Emphasizes outlines on a picture.
● The setting is unadjustable when “Enhancer” is set to “Off”.
■ –30 – +30 (Fuzzy ↔ Sharp)
Enhancer
Selects the frequency band enhanced by “Sharpness”.
■ Off : Deactivates the function.
■ Mode-1 / Mode-2 / Mode-3 / Mode-4 / Mode-5
(Emphasizes lower frequency band; for low-resolution picture ↔
Emphasizes higher frequency band; for high-resolution picture)
Enhancer Setting
Adjusts the effects of “Enhancer” in detail.
● All the settings are unadjustable when “Enhancer” is set to “Off”.
◆Detail
Adjusts texture of surface.
■ –15 – +15 (Weaker ↔ Stronger)
◆H.Sharp
Adjusts sharpness of horizontal outlines.
■ –15 – +15 (Weaker ↔ Stronger)
◆V.Sharp
Adjusts sharpness of vertical outlines.
■ –15 – +15 (Weaker ↔ Stronger)
Backlight
Adjusts the brightness of backlight.
■ –30 – +30 (Darker ↔ Brighter)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Backlight Setting
Adjusts settings of functions relating with backlight.
◆Smart Picture
Reduces the backlight automatically in dazzling scenes.
■ On / Off
◆Dynamic Backlight
Reduces the backlight automatically in dark scenes to represent black
deeper.
■ High / Medium / Low / Off
Colour System
Selects the colour system for the picture signal which is input to INPUT-4
from composite terminal.
● The setting is adjustable only when “Input-4 Setting” is set to “Composite”.
(➔ page 33)
● The setting is unadjustable when “PC Monitor Mode” is set to “On”.
■ Auto : An appropriate colour system is automatically applied
depending on the type of the input signal. Normally select this.
■ PAL/50 : When the colour system is PAL.
■ PAL/60 : When the colour system is PAL 60.
■ SECAM : When the colour system is SECAM.
■ NTSC3.58 : When the colour system is NTSC 3.58.
■ NTSC4.43 : When the colour system is NTSC 4.43.
■ PAL M : When the colour system is PAL-M.
■ PAL N : When the colour system is PAL-N.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Colour Matrix
Selects the colour matrix used for colour conversion.
● The setting is fixed to “Auto” and unadjustable when “Colour Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Colour”.
● The setting is fixed to “Auto” and unadjustable when ”PC Monitor Mode” is
set to “On”.
● The setting is fixed to “Auto” and unadjustable when “Colour Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
■ Auto : An appropriate colour matrix is applied automatically.
■ 709 : The colour matrix conforming ITU-R BT.709 is used for
conversion.
■ 601 : The colour matrix conforming ITU-R BT.601 is used for
conversion.
Colour Space
Changes the range of colour representation.
● “sRGB” or “AdobeRGB” is selectable when “PC Monitor Mode” is set to “On”.
● Even when “Auto” is selected, the setting may not switch to “x.v.Colour”
automatically depending on the connected device or the connection status.
■ Auto : Normally applies “Wide”. When the xvYCC signal is input to the
HDMI terminal, “x.v.Colour” is applied automatically.
■ Normal : HDTV standard.
■ Wide : The wide colour gamut of the equipped LED panel. (Wider than
the HDTV standard.)
■ x.v.Colour : Colour representation suitable for x.v.Colour.
■ sRGB : Colour representation suitable for sRGB.
■ AdobeRGB : Colour representation suitable for AdobeRGB.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Colour Temperature
Adjusts colour temperature (colour tone). A picture becomes more bluish
as colour temperature becomes higher.
● The setting is fixed to “Warm2” and unadjustable when “Colour Space” is set
to “sRGB” or “AdobeRGB”.
● The setting is fixed to “Warm2” and unadjustable when “PC Monitor Mode” is
set to “On”.
■ Cool1 / Cool2 / Normal / Warm1 / Warm2
(Higher temperature ↔ Lower temperature)
White Balance Setting
Adjusts colour temperature in detail; subtle control of RGB gradations.
● These settings are independent of the setting of “Colour Temperature”.
◆R Drive / G Drive / B Drive
Adjusts the depth of R/G/B on bright areas.
■ –30 – +30 (Dilute ↔ Dense)
◆R Cutoff / G Cutoff / B Cutoff
Adjusts the depth of R/G/B on dark areas.
■ –30 – +30 (Dilute ↔ Dense)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Colour Management
Adjusts the total colouring of pictures. Three colour management presets
are available to suit a variety of colour temperature settings.
● The setting is fixed to “Off” and unadjustable when “Colour Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Colour”.
● The setting is fixed to “Off” and unadjustable when ”PC Monitor Mode” is set
to “On”.
● The setting is fixed to “Off” and unadjustable when “Colour Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
■ Mode-1 : Improving the vividness of colours. Suitable for high colour
temperature.
■ Mode-2 : Standard colours. Suitable for normal colour temperature.
■ Mode-3 : Improving the total toning of colours. Suitable for low colour
temperature.
■ Off : Deactivates the function.
Colour Mngmt. Setting
Adjusts the total colouring of pictures in detail.
● All the settings are fixed to 0 and unadjustable when ”Colour Management”
is set to “Off”.
● All the settings are fixed to 0 and unadjustable when “Colour Space” is set to
“sRGB”, “AdobeRGB”, or “x.v.Colour”.
● All the settings are fixed to 0 and unadjustable when ”PC Monitor Mode” is
set to “On”.
● All the settings are fixed to 0 and unadjustable when “Colour Space” is set to
“Auto” and the xvYCC signal is input to the HDMI terminal.
◆Red Hue / Red Colour
Adjusts the tone/colourfulness of red colours.
■ –15 – +15 (Magenta ↔ Yellow) / –30 – +30 (Dilute ↔ Dense)
◆Yellow Hue / Yellow Colour
Adjusts the tone/colourfulness of yellow colours.
■ –15 – +15 (Red ↔ Green) / –30 – +30 (Dilute ↔ Dense)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
◆Green Hue / Green Colour
Adjusts the tone/colourfulness of green colours.
■ –15 – +15 (Yellow ↔ Cyan) / –30 – +30 (Dilute ↔ Dense)
◆Cyan Hue / Cyan Colour
Adjusts the tone/colourfulness of blue colours.
■ –15 – +15 (Green ↔ Blue) / –30 – +30 (Dilute ↔ Dense)
◆Skin Hue / Skin Colour
Adjusts the tone/colourfulness of skin colours.
■ –15 – +15 (Red ↔ Yellow) / –30 – +30 (Dilute ↔ Dense)
◆Colour : Bright Area
Adjusts the colour depth of bright areas.
■ –15 – +15 (Dilute ↔ Dense)
◆Colour : Dark Area
Adjusts the colour depth of dark areas.
■ –15 – +15 (Dilute ↔ Dense)
Gamma
Adjusts the gamma correction value and controls the brightness and
gradation of intermediately bright areas.
■ Mode-1 / Mode-2 / Mode-3 / Mode-4 (γ = 2.2) / Mode-5 / Mode-6
(Brighter ↔ Darker)
Picture Management
Adjusts gamma value automatically depending on the brightness of
pictures.
■ High / Medium / Low / Off
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Noise Reduction
Adjusts the settings of picture noise reduction.
● The functions are unavailable when “PC Monitor Mode” is set to “On” or
when signals in a PC signal format are coming in.
◆Digital VNR
Reduces picture noise.
■ Auto : Estimates the amount of noise automatically and applies
suitable noise reduction processing.
■ High / Medium / Low / Off
◆MPEG NR
Reduces noise on MPEG pictures such as mosquito-noise and block-
noise.
■ High / Low / Off
3DY/C
Detects the type of the picture signal (movie or still picture) which is input
to INPUT-4 from composite terminal and applies a suitable Y/C separation
process to each type.
● Unavailable when “Picture Delay Time” is set to “Short”.
● Unavailable when the format of the incoming signal is other than NTSC 3.58,
PAL50, PAL M or PAL N.
■ On / Off
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Natural Cinema
Displays quick-moving parts on cinemas originally taken on films with
more clarity.
● The setting is fixed to “Off” and unadjustable when “Picture Delay Time” is set
to “Short”.
● The setting is fixed to “Off” and unadjustable when “PC Monitor Mode” is set
to “On”.
● The setting is fixed to “Off” and unadjustable when progressive picture signal
is input.
■ Auto / Off
Picture Delay Time
Adjusts the time spent for picture-improving processes. The delay time
becomes shorter though picture quality is down when the processes are
skipped.
● The setting is fixed to “Short” and unadjustable when “PC Monitor Mode” is
set to “On”.
■ Normal : The picture-improving processes are fully applied, giving
priority to picture quality.
■ Middle : Some picture-improving processes are skipped to decrease
the delay time.
■ Short : Most of picture-improving processes are skipped to decrease
the delay time more.
PC Monitor Mode
Sets the monitor for use as a PC monitor.
● Only menu items which are necessary for PC monitors are activated.
● Input signals from HDMI terminals are recognized as PC signals (R:G:B = 4:4:4)
and are processed appropriately.
■ On / Off
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Eco Mode
Adjusts the brightness of backlight depending on the luminance of the
room to reduce power consumption.
■ Demo : Activating the function and indicating its performance.
■ On : Activating the function. Its performance is not indicated.
■ Off : Deactivates the function.
Other
◆Real Bit Driver
Makes the gradation of 8 bit signals natural and smooth.
● Also effective on signals not in 8 bit.
■ On / Off
◆100/120Hz CMD
Doubles the number of frames per second to reduce image blur.
● The setting is fixed to “Off” and unadjustable when “Colour Space” is set to
“sRGB” or “AdobeRGB”.
● The setting is fixed to “Off” and unadjustable when “Picture Delay Time” is set
to “Short”.
● The setting is fixed to “Off” and unadjustable when “PC Monitor Mode” is set
to “On”.
■ On / Off
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Bass
Adjusts bass tone.
■ –6 – +6 (Weaker ↔ Stronger)
Treble
Adjusts treble tone.
■ –6 – +6 (Weaker ↔ Stronger)
Balance
Adjusts sound balance.
■ L10 – 10R (To the left ↔ To the right)
Auto Volume Control
Turns down the volume automatically when an excessive strong sound
signal is input.
■ On / Off
Lip Sync
Adjusts the delay time of sound.
■ –3 – +3 (The sound starts earlier ↔ The sound starts later)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
PEQ
Optimizes the sound for the monitor’s supplied speaker unit. Select “Off”
when connecting other speakers.
■ On / Off
Turn On Volume
Adjusts the initial volume when turning on the monitor.
■ 0 – 50
■ Current : Setting the current volume to the initial.
● If the setting value surpass that of “Volume Limit”, the initial volume at
turning on becomes the maximum value set for “Volume Limit”.
● Amplifiers connected to an HDMI terminal ignore this setting.
Volume Limit
Sets the maximum volume to prevent unexpectedly loud sound
reproduction.
■ 0 – 50
● Amplifiers connected to an HDMI terminal ignore this setting.
Reset
Restores the settings of “Sound” to the initial.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Menu Language
You can choose the language used for on-screen messages.
■ English (EU) / Deutsch / Français(UE) / Italiano / Español (UE) /
Català / Nederlands / Dansk / Svenska / Norsk / Suomi / Polski /
Magyar / Русский / Ελληνικά / Português / Česky / Български /
Українська / Türkçe / Română /
/
/
/
/
Bahasa Melayu / / Español (US) / Français(US) / English (US) /
Front Panel Lock
Makes operations through the buttons on the monitor ineffective.
■ On : Making the buttons on the monitor ineffective.
■ Off : Making the buttons on the monitor effective.
● You can turn on/off the power by pressing and holding the [ ] button on the
monitor for more than 3 seconds even when the setting is “On”.
● You can change the setting to “Off” by pressing and holding the [MENU]
button on the monitor for more than 3 seconds.
● The settings returns to “Off” after disconnecting the power cord.
Auto Shut Off
Turns off the monitor automatically when no signal comes in.
■ On : Turns off the monitor automatically when no signal comes in and
no operation is done for 10 minutes.
■ Off : Deactivates the function.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom
Adjusts the aspect of pictures.
● The setting is also adjustable through the [ZOOM] button on the remote
control.
◆Options when the current input signal is SD
■ Auto : When the video signal contains information about aspect ratio
(WSS etc.), the aspect is switched accordingly. In other cases, the
picture is displayed in either “Regular” or “Panoramic”, depending on
the setting of “4:3 Aspect Setting” (➔ page 33).
■ Regular : No modifying of aspect.
Black areas remain at the left and
right side of the picture.
■ Panoramic : Zooming a picture to
the width of the monitor without
unnatural deformation.
■ 14:9 Zoom : Zooming a 14:9-aspect
picture in the way that the upper and
lower black bands are edged out.
Black areas remain at the left and
right side of the picture.
● You cannot select “14:9 Zoom” for
signals in 480i and 480p.
■ 16:9 Zoom : Zooming a picture in
the way that the upper and lower
black bands in a cinema program are
edged out.
■ 16:9 Zoom Subtitle : Zooming a
picture in the way that the upper
and lower black bands of a cinema
program are edged out leaving
space for captions.
■ Full : Stretching a picture to the
width of the monitor.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
◆Options when the current input signal is HD
● You can select “Full Native” only when the input signal is 1080i/p.
■ Full : Stretching a picture to the
width of the monitor.
■ Full Native : Displaying a picture
of 1080i/p without enlargement.
■ Slim : Shrinking a picture
horizontally. Black areas remain
at the left and right side of the
picture.
■ Panoramic Zoom : Zooming
a picture without unnatural
deformation in the way to edge
out the black parts around a
4:3-aspect cinema program
transferred through 16:9-aspect
signal.
◆Options when the current input signal is from a PC
● You cannot select “Just” and “1:1” for some input signals.
■ Full : Stretching a picture to the
width of the monitor.
■ Just : No modifying of aspect. Black
areas remain at the left and right
side of the picture.
■ 1:1 : No modifying of aspect or
resolution. Black areas remain
around the picture.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Position Adjustment
Adjusts the picture position on the monitor.
● Vertical adjustment is effective when “Zoom” is set to “14:9 Zoom”, “16:9
Zoom”, “Panoramic”, “16:9 Zoom Subtitle”, or “Panoramic Zoom”.
● Horizontal adjustment is effective only when “Zoom” is set to “Panoramic
Zoom”.
● When a PC signal is input, adjust the position on “PC Position Adjustment” in
”PC Setting”.
● The positioning is reset as the power is turned off.
● The positioning is reset as the signal format changes.
● The positioning is reset as the signal aspect changes.
Power Indicator
Sets the action of the power indicator.
■ On : The power indicator remains lit while the power is on.
■ Off : The power indicator does not light.
● The power indicator lights regardless of this setting if no signal is input while
the power is on.
Information
Displays the source indication.
■ On / Off
● The source indication appears regardless of this setting if no signal is input.
● The source indication is displayed for 4 seconds after changing the source
even if the setting is “Off”.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Label
Adds a source name specifying a device after the source name (“Input-1” -
“Input-4”).
■ (No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT /
AMP / GAME / CAM / DISC / PC
4:3 Aspect Setting
Selects the aspect setting which is applied when “Zoom” (➔ page 30) is
set to “Auto”. The picture is displayed in the selected aspect when the
aspect is 4:3 or when the monitor cannot detect the aspect of a picture.
■ Regular : Displays the picture in “Regular”.
■ Panoramic : Displays the picture in “Panoramic”.
1080 Auto Setting
Selects the default aspect for 1080i/p signals.
■ Full : Expands the picture to the full display size.
■ Full Native : Displays the picture in the same magnification (100%
scan).
Input-4 Setting
Selects the signal type for the INPUT-4 terminal (D-sub 15 pin).
● Use the supplied conversion cables and other cords according to the type of
connection. (➔ page 08)
■ PC : For PC signals
■ Component : For component signals
■ Composite : For composite signals
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Setting
Adjusts the settings for PC signals.
● The items below are unadjustable when no PC signal is input: “H Size”,
“V Size”, “Dot Clock”, “Clock Phase”, “PC Position Adjustment”, and “Auto
Position Adjustment”.
● “Auto Position Adjustment” is unavailable for INPUT-4.
● “Dot Clock” and “Clock Phase” are unavailable for INPUT-1, INPUT-2 and
INPUT-3.
◆Sampling Mode
Sets the display size for an analog input signal.
■ Std : For VGA60 and XGA60 signals
■ Wide : For WVGA60, WXGA (1280), WXGA (1360) and WXGA60 signals
◆WXGA Select
Sets the display size for an analog input signal.
■ 1280*768 : For WXGA (1280) signal
■ 1360*768 : For WXGA (1360) signal
■ 1366*768 : For WXGA60 signal
◆SXGA / SXGA+
Sets the display size for an analog input signal.
■ SXGA : For SXGA60 signal
■ SXGA+ : For SXGA+60 signal
◆H Size
Adjusts the picture width.
■ –20 – +20 (Smaller ↔ Larger)
◆V Size
Adjusts the picture height.
■ –20 – +20 (Smaller ↔ Larger)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
◆Dot Clock
Adjust this when the picture is not aligned vertically.
● The adjustment is kept after turning off the power.
■ –20 – +20
◆Clock Phase
Adjust this when letters on the screen look blurred or swaying.
● The adjustment is kept after turning off the power.
■ 0 – 31
◆PC Position Adjustment
Adjusts the picture position on the monitor.
● The adjustment is kept after turning off the power.
◆Auto Position Adjustment
Adjusts the picture position automatically.
◆Reset
Restores the settings of “PC Setting” to the initial.
Reset
Restores the settings of “Setup” to the initial.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI
Control with HDMI
Makes an HDMI CEC-compatible external component controllable through
this monitor.
■ On : Enables HDMI CEC control.
■ Off : Deactivates HDMI CEC control.
One Touch Play
Starting playback on an HDMI CEC-compatible external component
automatically turns on the monitor and change its source to the
component.
● The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set
to “Off”.
● Dedicated HDMI components cooperate with the monitor regardless of the
setting.
■ On / Off
Power Off Link
Turning off the monitor automatically turns off an HDMI CEC-compatible
external component.
● The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set
to “Off”.
● Dedicated HDMI components cooperate with the monitor regardless of the
setting.
■ On / Off
36
Download from Www.Somanuals.com. All Manuals Search And Download.
AMP Control
Makes an HDMI CEC-compatible amplifier controllable through the
monitor.
● The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set
to “Off”.
■ On / Off
Input-1 Audio
Selects the audio signal type for INPUT-1.
■ Auto : Detects the type automatically.
■ Digital : For HDMI equipment.
■ Analogue : For DVI equipment.
Reset
Restores the settings of “HDMI” to the initial.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The following are not malfunctions.
●This LCD display is built with very high precision technology; however,
be aware that a few pixels may be missing or constantly lit.
●When a still image is displayed for a long time, it may remain
indistinctly on the screen after the picture has changed. The remaining
picture will disappear after a while.
●The following symptoms are problems only when pictures or sounds
are not played back normally.
● A slight electric shock occurs when you touch the monitor.
● The top and/or rear panel of the monitor becomes hot.
● The monitor emits a cracking noise.
● The monitor emits a mechanical noise.
●If the monitor does not operate normally, perform the following to
reset the monitor.
● Turn off the power switch on the rear of the monitor, and turn it on again.
● Unplug the monitor from the wall outlet, and plug it in again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot turn on the monitor.
●Connect the power cord properly. (➔ page 10)
●Turn on the power switch. (➔ page 10)
The remote control does not work.
●Insert the batteries in the correct direction. (➔ page 05)
●Replace the batteries with new ones.
●Aim the remote control to the remote sensor on the monitor. (➔ page
11)
● The effective range of the remote control is about seven meters.
●Get closer to the monitor.
●Remove any obstruction between the remote control and the monitor.
No picture from a connected device.
●Select the correct input on the monitor.
●Connect the external device properly.
●Turn on the external device and start playback.
No sound.
●Check the speaker cord connection. (➔ page 05)
●Press the MUTE button ( ).
●Check the amplifier connection.
● When “AMP” is selected under “Speaker”, the sound is output from the
amplifier, and not from the speakers of the monitor. (➔ page 13)
No picture from HDMI devices.
●Select the correct input on the monitor.
●Use a cable marked with the HDMI logo.
●Please use a High Speed HDMITM Cable. High Speed HDMITM Cables are
tested to carry an HD signal up to 1080p and higher. (➔ page 09)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
No sound from HDMI devices.
●Set “Input-1 Audio” properly. (➔ page 37)
Cannot control HDMI CEC devices.
●Set “Control with HDMI” to “On”. (➔ page 36)
●Some devices may not accept controls by HDMI CEC.
Cannot operate the product using the buttons on the monitor.
●Set “Front Panel Lock” to “Off”. (➔ page 29)
Picture from a computer is strange.
●Adjust the items under “PC Setting”. (➔ page 34)
The source indication stays on the display.
●Turn on the selected external device and start playback.
● When no signal is input, you cannot turn off the source indication.
The picture and the sound do not synchronize.
●Adjust “Lip Sync”. (➔ page 27)
●Adjust “Picture Delay Time”. (➔ page 25)
Colours are strange.
●Adjust the items under “Picture”. (➔ page A-2)
●Load one of the picture presets to discard the current settings and
apply the selected preset. (➔ page A-3)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model name
LT-42WX70EU
LCD panel
42-inch (viewable)
107 cm
Screen size (visible area
size measured diagonally)
Display resolution
Display colours
1920×1080
16.77 million
Viewing angle (TYP.)
178 ° (Horizontally)
178 ° (Vertically)
450 cd/m2
Luminance (TYP.)
Contrast ratio (TYP.)
Horizontal/vertical
frequency (computer
signal)
4000 : 1
Horizontal: 31.469 kHz – 75.000 kHz
Vertical: 60 Hz 5 Hz
Compliant video signal
formats
➔ page 44
Audio output
Operating environment
Speakers: 10 W + 10 W (Impedance 8 Ω)
Operating temperature: 0 °C – 40 °C
Operating humidity: 20 % – 80 % (non-
condensing)
(Slightly variable depending on ambient
conditions for installation.)
AC 100 V – 240 V, 50 Hz/60 Hz
175 W
AC 230 V: 0.7 W
AC 100 V: 0.4 W
Power requirements
Power consumption
Power consumption (on
standby)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Mass
➔ page 43
12.0 kg (without the speaker unit and the stand)
17.8 kg (including the stand)
19.0 kg (including the speaker unit and the stand)
Power cable ×1, Speaker unit ×1, Screws for the
speaker unit ×2, remote control unit ×1, AAA
batteries ×2
Supplied accessories
Input terminals
HDMI ×3
D-sub (15 pin) ×1
Audio input (3.5 mm stereo mini jack)
Output terminals
External control
Speaker output
RS-232C
● For easy understanding, pictures and illustrations are shown by being
emphasized, omitted or composed, and may slightly be different from actual
products.
● Design and specifications are subject to change without notice.
● HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
● All company names and product names mentioned herein are used for
identification purposes only, and may be the trademarks or registered
trademarks of their respective companies.
Notice on transportation
●This monitor is precision equipment and needs dedicated packing
material for transportation. Never use any packing material supplied
from sources other than JVC or JVC-authorized dealers.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
unit: mm
1 : 990.0
2 : 716.8*1 / 689.3*2 / 661.8*3
3 : 400.0
4 : 117.0*1 / 89.5*2 / 62.0*3
5 : 400.0
6 : 200.0
7 : 42.5
8 : 599.8
9 : 170.0
*1 At the high position
*2 At the middle position
*3 At the low position
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliant signal formats (1)
INPUT-4 terminal (PC)
Frequency
Horizontal (Hz)
24.823
31.469
37.861
37.500
31.020
37.879
48.077
46.875
48.363
56.476
60.023
47.776
47.712
48.363
63.981
63.981
65.220
45.000
67.500
Signal
Vertical (Hz)
Dot clock (MHz)
21.050
PC98
VGA 60†1
56.42
59.94
72.81
75.00
60.00
60.32
72.19
75.00
60.00
70.07
75.03
59.87
60.02
60.00
60.02
60.02
60.00
60.00
60.00
25.175
VGA 72
31.500
VGA 75
WVGA 60†2
31.500
33.750
SVGA 60
40.000
SVGA 72
50.000
SVGA 75
XGA 60†1
49.500
65.000
XGA 70
75.000
XGA 75
78.750
WXGA(1280)†2†3
WXGA(1360)†2†4
WXGA 60†2†5
SXGA 60†6
SXGA+ 60†7
SXGA+ 60*
1280x720
1920x1080
79.500
85.500
86.715
108.000
108.000
122.614
74.250
148.500
†1 : Set “Sampling Mode” to “Std”.
†2 : Set “Sampling Mode” to “Wide”.
†3 : Set “WXGA Select” to “1280*768”.
†4 : Set “WXGA Select” to “1360*768”.
†5 : Set “WXGA Select” to “1366*768”.
†6 : Set “SXGA / SXGA+” to “SXGA”.
†7 : Set “SXGA / SXGA+” to “SXGA+”.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Total pixels
pixel per line line per frame
Effective pixels
pixel per line line per frame
Standard
848
800
440
525
520
500
517
628
666
625
806
806
800
798
795
806
1066
1066
1087
750
1125
640
640
400
480
480
480
480
600
600
600
768
768
768
768
768
768
1024
1050
1050
720
1080
—
VESA Standard
VESA Standard
VESA Standard
—
832
640
840
640
1088
1056
1040
1056
1344
1328
1312
1664
1792
1793
1688
1688
1880
1650
2200
848
800
VESA Standard
VESA Standard
VESA Standard
VESA Standard
VESA Standard
VESA Standard
—
800
800
1024
1024
1024
1280
1360
1366
1280
1400
1400
1280
1920
VESA Standard
—
VESA Standard
—
—
—
—
● Signals in a format not listed above may not be displayed properly. Change the
resolution setting on the PC.
● Some signals may not be displayed properly even if their format is in the list
above.
● Because signals in PC98, VGA 72, VGA 75, SVGA 72, SVGA 75, XGA 70 and XGA
75 need to be converted into 60Hz before displayed on the monitor, playback
of these signals look jerky. Select other signal formats for smoother playback of
moving pictures.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Compliant signal formats (2)
INPUT-4 terminal (composite)
INPUT-4 terminal (component)
Frequency
Frequency
Signal
Signal
Vertical (Hz) Horizontal (Hz)
Vertical (Hz) Horizontal (Hz)
PAL/50
PAL/60
SECAM
NTSC3.58
NTSC4.43
PAL M
50.00
59.94
50.00
59.94
59.94
59.94
50.00
15.63
15.73
15.63
15.73
15.73
15.73
15.63
480/60i
59.94
50.00
59.94
50.00
59.94
50.00
59.94
50.00
59.94
50.00
29.97
24.00
15.73
15.63
31.47
31.25
44.96
37.50
33.72
28.13
67.43
56.25
33.72
27.00
576/50i
480/60p
576/50p
720/60p
720/50p
1080/60i
1080/50i
1080/60p
1080/50p
1080/30p
1080/24p
PAL N
INPUT-1, INPUT-2, INPUT-3 terminal (HDMI-HDMI)
Frequency
Signal
Vertical (Hz)
59.94/60
59.94/60
59.94/60
59.94/60
59.94/60
59.94/60
50.000
Horizontal (Hz)
31.469/31.5
31.469/31.5
44.955/45
33.716/33.75
15.734/17.75
67.433/67.5
31.25
Dot clock (MHz)
25.175/25.2
27/27.027
74.176/74.25
74.176/74.25
27/27.027
148.352/148.5
27
VGA 60
480/60p
720/60p
1080/60i
480/60i
1080/60p
576/50p
720/50p
1080/50i
576/50i
50.000
37.5
74.25
50.000
28.13
74.25
50.000
15.63
27
1080/50p
1080/24p
1080/25p
1080/30p
50.000
56.25
148.5
23.976/24
25.000
26.973/27
28.13
74.176/74.25
74.25
29.97/30
33.716/33.75
74.176/74.25
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Total pixels
pixel per line
Effective pixels
pixel per line
line per frame
525
line per frame
480
800
858
640
720
525
480
1650
2200
858
750
1280
1920
720
720
562/563
262/263
1125
1080
480
2200
864
1920
720
1080
576
625
1980
2640
864
750
1280
1920
720
720
562/563
312/313
1125
1080
576
2640
2750
2640
2200
1920
1920
1920
1920
1080
1080
1080
1080
1125
1125
1125
● Signals in a format not listed above may not be displayed properly. Change the
resolution setting on the PC.
● Some signals may not be displayed properly even if their format is in the list
above.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Icons
Composite . . . . . . . . . . . . . . . . . 08
Computer. . . . . . . . . . . . 08, A-10
Connection . . . . . . . . . . . . . . . . 08
Contrast . . . . . . . . . . . . . . . . . . . 17
Contrast Setting. . . . . . . . . . . . 17
Control with HDMI . . . . . . . . . 36
. . . . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . . . . 12
+/– . . . . . . . . . . . . . . . . . . . . . 12
Numbers
3DY/C . . . . . . . . . . . . . . . . . . . . . 24
4:3 Aspect Setting. . . . . . . . . . 33
1080 Auto Setting. . . . . . . . . . 33
D
Digital camera . . . . . . . . . . . A-11
DVI . . . . . . . . . . . . . . . . . . . . . . . . 08
A
E
F
AMP Control . . . . . . . . . . . . . . . 37
Auto Shut Off . . . . . . . . . . . . . . 29
Auto Volume Control. . . . . . . 27
Eco Mode . . . . . . . . . . . . . . . . . . 26
Enhancer . . . . . . . . . . . . . . . . . . 18
Enhancer Setting. . . . . . . . . . . 18
EXIT . . . . . . . . . . . . . . . . . . . . . . . 14
B
Backlight . . . . . . . . . . . . . . . . . . 18
Backlight Setting. . . . . . . . . . . 19
Balance . . . . . . . . . . . . . . . . . . . . 27
Bass . . . . . . . . . . . . . . . . . . . . . . . 27
Battery. . . . . . . . . . . . . . . . . . . . . 05
Brightness . . . . . . . . . . . . . . . . . 17
Front Panel Lock . . . . . . . . . . . 29
G
Gamma . . . . . . . . . . . . . . . . . . . . 23
H
HDMI . . . . . . . . . . . . . . . . . . . . . . 36
C
HDMI CEC. . . . . . . . . . . . . . . . . . 13
Hue. . . . . . . . . . . . . . . . . . . . . . . . 16
Hue Setting . . . . . . . . . . . . . . . . 16
Colour . . . . . . . . . . . . . . . . . . . . . 16
Colour Management . . . . . . . 22
Colour Matrix . . . . . . . . . . . . . . 20
Colour Mngmt. Setting . . . . . 22
Colour Space. . . . . . . . . . . . . . . 20
Colour System . . . . . . . . . . . . . 19
Colour Temperature. . . . . . . . 21
Component. . . . . . . . . . . . . . . . 08
I
Information . . . . . . . . . . . . . . . . 32
Input-1 Audio . . . . . . . . . . . . . . 37
Input-4 Setting. . . . . . . . . . . . . 33
Input Label . . . . . . . . . . . . . . . . 33
48
Download from Www.Somanuals.com. All Manuals Search And Download.
L
R
S
LINK . . . . . . . . . . . . . . . . . . . . . . . 13
Lip Sync . . . . . . . . . . . . . . . . . . . 27
Remote control unit. . . . . . . . 12
Remote sensor . . . . . . . . . . . . . 11
Reset . . . . . . . . . . . . . . . 28, 35, 37
M
Main unit . . . . . . . . . . . . . . . . . . 11
MENU . . . . . . . . . . . . . . . . . . . . . 14
Menu Language . . . . . . . . . . . 29
Setup . . . . . . . . . . . . . . . . . . . . . . 29
Sharpness . . . . . . . . . . . . . . . . . 18
Sound . . . . . . . . . . . . . . . . . . . . . 27
Speaker unit . . . . . . . . . . . . . . . 05
N
Natural Cinema . . . . . . . . . . . . 25
Noise Reduction . . . . . . . . . . . 24
T
Touch sensor panel . . . . . . . . 11
Treble . . . . . . . . . . . . . . . . . . . . . 27
Turn On Volume . . . . . . . . . . . 28
O
One Touch Play . . . . . . . . . . . . 36
OPTION. . . . . . . . . . . . . . . . . . . . 12
Other . . . . . . . . . . . . . . . . . . . . . . 26
V
Video game. . . . . . . . . . . . . . . A-5
Volume Limit . . . . . . . . . . . . . . 28
P
PC Monitor Mode . . . . . . . . . . 25
PC Setting . . . . . . . . . . . . . . . . . 34
PEQ. . . . . . . . . . . . . . . . . . . . . . . . 28
Picture. . . . . . . . . . . . . . . . .A-2, 15
Picture Delay Time . . . . . . . . . 25
Picture Management. . . . . . . 23
Position Adjustment . . . . . . . 32
Power cable. . . . . . . . . . . . . . . . 10
Power indicator . . . . . . . . . . . . 11
Power Indicator . . . . . . . . . . . . 32
Power Off Link . . . . . . . . . . . . . 36
Power switch . . . . . . . . . . . . . . 10
W
White Balance Setting . . . . . . 21
Z
Zoom. . . . . . . . . . . . . . . . . . . . . . 30
ZOOM . . . . . . . . . . . . . . . . . . . . . 12
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|