JVC Computer Monitor LCT2582 001A H User Manual

LCD Monitor  
LT-32WX50  
INSTRUCTIONS  
LCD Monitor INSTRUCTIONS  
LCT2582-001A-H  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: To reduce the risk of electric shock.  
Do not remove cover (or back). No user  
serviceable parts inside. Refer servicing to  
qualified service personnel.  
The lightning flash with arrowhead symbol, within an equilateral  
triangle is intended to alert the user to the presence of uninsulated  
“dangerous voltage” within the product’s enclosure that may be  
of sufficient magnitude to constitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is intended  
to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature  
accompanying the appliance.  
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS  
APPARATUS TO RAIN OR MOISTURE.  
CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES  
REGARDING THE USE OF THIS UNIT.  
1. Operate only from the power source specified on the unit.  
2. Avoid damaging the AC plug and power cord.  
3. Avoid improper installation and never position the unit where good  
ventilation is unattainable.  
4. Do not allow objects or liquid into the cabinet openings.  
5. In the event of trouble, unplug the unit and call a service technician. Do  
not attempt to repair it yourself or remove the rear cover.  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changes or modifications not approved by JVC could void the warranty.  
When you don’t use this monitor for a long period of time, be sure to  
disconnect both the power plug from the AC outlet and antenna for your  
safety.  
To prevent electric shock do not use this polarized plug with an extension  
cord, receptacle or other outlet unless the blades can be fully inserted to  
prevent blade exposure.  
Do not attempt to service the product yourself  
Caution  
To prevent electrical shock, do not open the cabinet.  
There are no user serviceable parts inside.  
Please refer to qualified service personnel for repairs.  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9) Do not defeat the safety purpose of the polarized or grounding-type  
plug. A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury  
from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled or objects have  
fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects  
filled with liquids, such as vases, shall be placed on the apparatus.  
16) Place the monitor on a stable, flat surface. Failure to do so can result in  
the monitor falling, causing injury.  
17) DO NOT allow young children to play around or on the monitor. Do not  
hang from the monitor. Failure to do so can result in the monitor falling,  
causing injury.  
18) To prevent electrical shock, do not open cover or take apart the AC  
adapter. Repair should be done by service personnel only.  
19) Do not let the AC adapter hang down while using.  
20) Do not cover or wrap the AC adapter with clothes or sheets or the like.  
21) Leave space around the AC adapter to prevent overheating.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22) Use of power cords or AC adapters other than those provided may cause  
fire or malfunction.  
23) DO NOT allow young children to play with the plastic bag that came  
with the monitor when you unpacked it. Failure to do so can result in  
suffocation, causing injury.  
24) Avoid improper installation and never position the unit where good  
ventilation is impossible. When installing this monitor, distance  
recommendations must be maintained between the set and the wall, as  
well as inside a tightly enclosed area or piece of furniture. Keep to the  
minimum distance guidelines shown for safe operation.  
200 mm  
(7 7/8’’)  
200 mm (7 7/8’’)  
50 mm  
(2’’)  
150 mm  
(5 7/8’’)  
150 mm  
(5 7/8’’)  
50 mm (2’’)  
25) Cautions for installation  
Do not tilt the monitor towards the left or right, or towards the back.  
Install the monitor in a corner on the floor so as to keep cords out of the  
way.  
The monitor will generate a slight amount of heat during operation.  
Ensure that sufficient space is available around the monitor to allow  
satisfactory cooling.  
Have two people remove the monitor from the box with the screen  
facing away from you. It’s possible your clothing, (such as a belt buckle  
or button) may scratch the front of the monitor. Do the same when  
moving the monitor to another location.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
26) When installing the monitor on the wall, ask your dealer to install.  
27) Make enough room for inserting and removing the power plug. Place  
the monitor as close to the outlet as possible. The main power supply  
for this monitor is controlled by inserting or removing the power plug.  
28) Batteries shall not be exposed to excessive heat such as sunshine, fire or  
the like.  
29) When this monitor is connected to the wall outlet, it is always on  
standby even when all the LED lamps are not lit. To shut down the  
monitor, unplug the monitor from the wall outlet.  
To avoid burn-in  
Do not display a still picture for an extended period of time. Doing so may  
cause a faint image to remain on your screen.  
Warning  
To prevent an accidental fall  
To prevent injury, the monitor must be fixed to the floor/cabinet. Use  
bolts and nuts or screws (ø 4 mm, sold separately) to fix the monitor to  
the floor/cabinet utilizing the holes of the stand.  
Bolt/screw  
(sold separately)  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Carrying the monitor  
When carrying the monitor, hold it by the sides  
as illustrated.  
IMPORTANT RECYCLING INFORMATION  
This product has a fluorescent lamp that contains mercury. Disposal of  
these materials may be regulated in your community due to environmental  
considerations. For disposal or recycling information, please contact your  
eiae.org  
FCC Notice:  
Caution: Changes or modifications not expressly approved by party  
responsible for compliance could void the user’s authority to operate the  
equipment.  
Note: This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
More precise adjustment of picture quality with a  
wide range of adjustment properties  
page A-2  
Enjoy SLR digital camera photographs page A-11  
Slim cabinet provides you with greater freedom of  
choice for installation  
Quick response making video games more exiting  
— Game Mode  
page A-5  
Operating HDMI devices from the TV remote  
controller — HDMI CEC compatible  
page 11  
02  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04  
Included items  
04  
04  
05  
05  
06  
08  
08  
Inserting batteries into the remote control  
Attaching the speaker unit  
Installation  
Connecting external devices  
Connecting the power cable/AC adapter  
Initial settings  
Parts identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09  
Controlling HDMI devices. . . . . . . . . . . . . . . . . . . . . . . . . 11  
Changing the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Picture  
Sound  
Setup  
HDMI  
13  
25  
27  
34  
Viewing photographs on SD card/  
USB device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
External Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Technical information  
Adjust the picture to your needs . . . . . . . . . . . . . . . . . A-2  
Set up the monitor for your PC . . . . . . . . . . . . . . . . . . . A-10  
Enjoy SLR digital camera photographs . . . . . . . . . . . A-11  
Menu index by task. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12  
You can search for picture/sound menu items from the  
adjustment you want to make, and quickly find the page  
containing detailed information.  
03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Included items  
Main unit (monitor)  
Video cable (D-sub 15 pin / RCA)  
Audio cable (3.5 mm stereo mini /  
RCA)  
Speaker unit  
Stand  
RS-232C extension cable  
Video cable (D-sub 15 pin)  
VESA bracket  
Power cable  
M4 x 8 screws (for the stand or  
VESA bracket, × 4)  
M3 x 12 screw (for the HDMI  
cover, × 1)  
Remote control  
unit, AAA size  
AC adapter  
HDMI cover, AC terminal cover,  
D-sub cover, hook hole covers  
(× 2), bottom covers (× 2)  
SD card cover (× 1), screw (× 1)  
Instructions (this book), startup  
sheet, other printed material  
batteries  
Inserting batteries into the remote control  
When replacing the batteries  
If this symbol is shown,  
it is only valid in the  
European Union  
To avoid short-circuit, place the minus  
end of the batteries first.  
Batteries shall not be exposed to  
excessive heat such as direct sunshine, fire or the like.  
Read the precautions on the battery.  
The batteries last about 6 to 12 months on regular usage.  
The included batteries are supplied for operation check and may last shorter.  
04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching the covers  
Attach the HDMI cover (3) and AC terminal cover (5) after connections have  
been made. Fix the HDMI cover to the unit using the supplied screw. Break off  
the bottom right of the HDMI cover when you want to extend the HDMI cable  
backwards.  
Attach the D-sub cover (1), hook hole covers (2) and bottom covers (4) when  
the respective openings are not in use.  
1
2
3
1
2
2
4
5
3
4
4
5
Attaching the speaker unit  
Connect the speaker unit to the monitor if you do not connect any other  
external audio output device.  
Set the volume to the minimum level and turn the power off before you attach  
the speaker unit to the monitor.  
Refer to the startup sheet for details.  
Installation  
Install the unit properly referring to the cautions from pages ii to vii.  
Attach the stand (supplied) to stand the monitor. Refer to the startup sheet for  
details.  
Attach the VESA bracket using the supplied screws when installing the monitor  
on the wall. Refer to the startup sheet for details. Consult a specialist when you  
install the monitor on the wall.  
05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting external devices  
To connect a device with component terminals  
ø 3.5 mm stereo  
mini plug  
To connect a device with a composite terminal  
Green  
To connect a computer  
To connect a DVI device  
To INPUT-1 terminal  
To connect an HDMI device  
To INPUT-1/INPUT-2  
terminals  
06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMITM (V.1.3, with Deep Color, with x.v.ColorTM, HDMITM CEC Support)  
INPUT-3:  
D-sub 15 pin  
RS-232C  
terminal  
(page 40)  
AUDIO IN terminal :  
3.5 mm stereo mini  
jack  
INPUT-2: HDMITM terminal  
INPUT-4 :  
SD card slot,  
USB type slot  
(page 36)  
INPUT-1: HDMITM  
terminal  
A: Video cable (supplied)  
B: Audio cable (supplied)  
C: Video cable (supplied)  
D: RS-232C extension cable (supplied)  
a: Component cable (sold separately)  
b: Audio cable (sold separately)  
c: Video cable (sold separately)  
d: VGA cable (sold separately)  
e: Audio cable (sold separately)  
f: DVI-HDMI cable (sold separately)  
g: HDMI cable (sold separately)  
When using the INPUT-3 terminal, set “Input-3 Setting” (page 31) properly  
according to the connected device.  
To reduce noise, use a VGA cable with core filters.  
When you connect a DVI device to INPUT-2, only the video signal is played  
back, and the sound signal is not.  
07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the power cable/AC Adapter  
Connect AC plug adapter and power cord to the monitor in the order of  
numbers below.  
Insert the power terminal firmly until you hear a clicking sound.  
AC adapter  
Power cable  
Ground the earth plug of the power cable to the earth terminal of the AC  
outlet.  
Initial settings  
When you turn on the monitor for the first time, initial settings start. Select  
the menu language and the place of installation.  
1 Select the menu language.  
1-1 Select “Menu Language” and press  
Interactive Plug-in Menu  
Previous 2/4  
the [OK] button.  
1-2 Select from the list the language  
you want using the [  
Menu Language  
English(EU)  
English(EU)  
English(US)  
Suomi  
Français(EU)  
Français(US)  
Deutsch  
Set  
]
buttons, and press the [OK]  
button.  
Ελληνιά  
Magyar  
Next  
1-3 Select [Set] and press the [OK]  
button.  
2 Select the place of installation.  
2-1 Select “Place of Installation” and press the [OK] button.  
2-2 Select the place of installation using the [  
the [OK] button.  
] buttons, and press  
2-3 Select [Set] and press the [OK] button.  
Whichever place you select in step 2, settings and functions are the same.  
In steps 1-1 and 2-1, you can also select a setting by pressing the [  
] buttons.  
08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts identification  
Main unit  
Speaker unit  
Remote sensor  
Power indicator  
Power indicator Lights while the monitor is on.  
Remote sensor Aim the remote control here.  
Turns the monitor on/off (on standby).  
INPUT  
MENU  
Switches the input.  
Opens the setting menu. Functions as the down cursor  
key in the menu operations.  
Functions as the left cursor key and the right cursor key  
in the menu operations.  
Turns up the volume. Functions as the OK key in the  
menu operations.  
+ OK  
Turns down the volume. Functions as the BACK key in  
the menu operations.  
– BACK  
09  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
POWER  
Turns the monitor on/off (on  
standby).  
LINK  
Opens the photo viewer menu or  
the operation window for HDMI  
CEC devices. (page 11)  
Opens the setup window of HDMI  
CEC devices.  
OPTION  
Opens the setting menu of the  
photo viewer (page 38).  
Opens the setting menu.  
(page 12)  
MENU  
EXIT  
Exits from the menu.  
Selects an item.  
(Cursor keys)  
OK  
Confirms your selection.  
BACK  
ASPECT  
BLUE  
Goes back to the previous screen.  
Changes the aspect. (page 28)  
Press accordingly to the on-screen  
indications.  
RED  
GREEN  
YELLOW  
VOL +/–  
MUTING  
INPUT 1  
INPUT 2  
INPUT 3  
INPUT 4  
Adjusts the volume.  
Attenuates the sound.  
Switches the input.  
Buttons not mentioned above are equipped for the  
operations of a TV tuner.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controlling HDMI devices  
You can control HDMI CEC devices connected to this monitor using the  
remote of the monitor.  
This function can be customized in the “HDMI” settings (page 34).  
Devices may not operate or may function differently from described,  
depending on the model or the manufacturer.  
1 Press the [LINK] button.  
Link >Recorder  
Device  
Input-1  
Operation window appears.  
Rec.  
Rec.Stop  
NAVIGATION  
Function  
2 Select the device to control.  
Select the device name under “Device”.  
Operation Panel  
Speaker  
Exit  
Monitor  
3 Control the selected HDMI device.  
“Rec.” : Starts recording.  
Operate  
Select  
”Rec.Stop” : Stops recording.  
“NAVIGATION” : Opens the playback menu of the HDMI device.  
“Function” : Opens the operation menu of the HDMI device.  
“Operation Panel” : Opens the operation panel.  
To select the audio output  
When an HDMI CEC amplifier is connected to the monitor, you can select  
either the monitor or the amplifier as the device to output the sound  
signal.  
To output the sound from the amplifier, set “AMP Control” (page 35) to “On”,  
and connect the audio output terminals of the player into the amplifier.  
1 Press the [LINK] button.  
2 Select “Monitor” or “AMP” under “Speaker”.  
“Monitor” : The sound is output from the speakers when you connect the  
speaker unit (sold separatery) to the monitor. The volume buttons of the  
monitor control the volume of the speakers.  
“AMP” : The sound is output from the amplifier. The volume buttons of the  
monitor control the volume of the amplifier.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the settings  
Example: to change the setting of “Color Temperature”  
1 Open the menu.  
Picture  
Page 1/3  
Memory1  
Memory Setting  
Load Preset  
Tint  
0
2 Select “Picture”.  
Tint Setting  
Color  
Contrast  
0
0
Contrast Setting  
Brightness  
Sharpness  
0
0
3 Select “Color Temperature”.  
The item currently selected is shown in orange.  
4 Select the setting you want.  
When the selected item is followed by an adjustment screen, press the  
] buttons to make adjustments.  
[
page 13  
page 25  
page 27  
page 34  
Picture  
Sound  
Setup  
HDMI  
5 Finish the setting.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical information  
Adjust the picture to your needs  
Set up the monitor for your PC  
A-2  
A-10  
Enjoy SLR digital camera photographs  
A-11  
Menu index by task  
A-12  
Show Your True Colors.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjust the picture to your  
needs  
To use a preset  
1 Open the menu.  
2 Select a memory from “Setting Memory” in “Picture”.  
In the initial setting, 6 presets are assigned to each memory as follows:  
Memory1 : Standard  
Memory2 : Dynamic  
Memory3 : Theater  
Picture  
Page 1/3  
Memory1  
Memory4 : Monitor  
Memory5 : Photo Pro  
Memory6 : Game  
Memory Setting  
Load Preset  
Tint  
Tint Setting  
Color  
0
0
0
Contrast  
See page A-4 for the detail of  
each preset.  
Contrast Setting  
Brightness  
Sharpness  
0
0
If you have modified the settings  
(next page), the settings of  
each memory are different from the default.  
When the input is changed, the memory used for the input last time is  
automatically applied.  
A-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This monitor features rich menus for picture control, in addition to 10 pre-  
installed sets of picture settings carefully prepared by JVC to suit various  
types of video content and viewing environment.  
Enjoy controlling appearance of pictures using the “Picture” menu, and  
create your own picture settings.  
To customize the settings  
You can create your own set of picture settings by arranging the settings of  
a preset. Storing several sets of settings helps you to enjoy a picture in the  
taste you like according to the viewing environment and characteristics of  
the source.  
1 Open the menu.  
2 Select the memory you want to adjust from “ Memory  
Setting ” in “Picture”.  
3 Adjust items in “Picture”.  
See pages 14 and later for the detail of menu items.  
It is recommended to use the preset of “Standard” as the base of your  
adjustment.  
Adjustments are stored into the selected memory as you change the settings.  
To make another set of picture settings, select another memory in step 2  
above and start adjustments.  
To reset the settings  
If you do not like your current adjustments, load either of the preset settings  
into the memory which you want to reset. Settings of the selected memory  
are overwritten by those of the loaded preset setting.  
1 Open the menu.  
2 Select the memory you want to reset from “ Memory Setting ” in  
“Picture”.  
3 Select “Load Preset”, select one of the preset settings, and press  
“Load”.  
A-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Characteristics of the 10 presets  
Dynamic  
Makes pictures colorful and  
bright, suitable for watching in a  
well-light room.  
Standard  
The most standard setting.  
Theater  
Suitable for watching cinemas in  
a dark room.  
Special settings  
Signage  
Suitable for digital signage use in  
market, shops or hotels.  
HD  
CCTV  
Suitable for monitoring CCTVs  
in HD format.  
A-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
See the following pages for the setting values of each preset.  
Monitor  
Does not apply color adjustments  
or noise reductions.Input video  
signals are displayed as they are.  
Suitable for monitoring purpose.  
Photo Pro  
Suitable for watching still  
pictures of SLR digital cameras.  
Game  
Gives priority to the response  
time for picture movement.  
Suitable for game consoles.  
CCTV SD  
Suitable for monitoring CCTVs  
in SD format.  
Option  
Suitable for displaying medical  
images including x-ray pictures.  
This setting is only for approximate  
presentation and does not conform  
to any official standard of medical  
imaging.  
A-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting values of each preset  
The settings are subject to change for amelioration.  
Dynamic Standard Theater  
Monitor  
Tint  
0
0
0
0
Tint Setting  
BY Gain  
BY/RY Angle  
Color  
0
0
+8  
+3  
0
0
0
0
0
0
+2  
+4  
0
+3  
+2  
0
Contrast  
Contrast Setting  
Black Stretch  
Dynamic DC  
Offset  
High  
On  
Medium  
On  
Off  
On  
Off  
Off  
Auto Contrast  
Brightness  
Sharpness  
Enhancer  
On  
0
+10  
Mode-2  
Off  
0
0
Off  
+2  
0
Off  
0
–30  
Mode-3  
Mode-2  
Mode-3  
Enhancer Setting  
Detail  
H.Sharp  
V.Sharp  
Backlight  
0
–5  
+5  
+5  
+5  
0
0
0
0
0
+10  
+10  
+30  
+10  
+5  
–5  
Backlight Setting  
Smart Picture  
Off  
On  
On  
Off  
Dynamic Backlight High  
Medium  
Auto  
Auto  
Auto  
Mode-3  
Low  
Off  
Color System  
Color Matrix  
Auto  
Auto  
Auto  
Auto  
Normal  
Mode-5  
Auto  
Auto  
Normal  
Mode-5  
Color Space  
Auto  
Color Temperature  
Mode-2  
A-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Pro Game  
Signage  
CCTV HD CCTV SD Option  
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
+5  
0
0
0
+8  
+4  
0
0
+14  
+5  
0
0
0
0
Off  
Off  
Off  
Off  
Medium  
Off  
High  
Off  
High  
Off  
Off  
Off  
Off  
Off  
On  
On  
On  
Off  
0
0
0
0
–4  
+2  
0
–15  
Mode-3  
–10  
Mode-3  
20  
Mode-1  
20  
Mode-1  
–30  
Mode-3  
Mode-3  
–15  
–5  
–15  
+5  
0
0
0
+10  
0
0
–15  
+30  
0
0
0
+30  
0
0
0
0
+18  
+5  
–5  
+30  
Off  
On  
Off  
Off  
Off  
Off  
Off  
Off  
Medium  
Auto  
Auto  
Wide  
Mode-2  
Medium  
Auto  
Auto  
Wide  
Mode-3  
Medium  
Auto  
Auto  
Wide  
Mode-3  
Off  
Auto  
Auto  
sRGB  
Mode-5  
Auto  
Auto  
Auto  
Mode-2  
Auto  
Auto  
Normal  
Mode-4  
A-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic Standard Theater  
Monitor  
White Balance Setting  
R Drive / G Drive /  
B Drive  
R Cutoff / G Cutoff /  
B Cutoff  
0
0
0
0
0
0
0
0
Color Management Mode-1  
Color Mngmt. Setting  
Mode-2  
Mode-3  
Off  
Red Tint / Red  
Color  
Yellow Tint /  
Yellow Color  
Green Tint / Green  
Color  
Cyan Tint / Cyan  
Color  
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Skin Tint / Skin  
Color  
0
Color : Bright Area  
Color : Dark Area  
0
0
0
0
0
0
0
0
Gamma  
Mode-2  
High  
Mode-2  
Medium  
Mode-3  
Low  
Mode-3  
Off  
Dynamic Gamma  
Noise Reduction  
Digital VNR  
MPEG NR  
3DY/C  
Auto  
Low  
On  
Auto  
Low  
On  
Auto  
Low  
On  
Off  
Off  
Off  
Natural Cinema  
Picture Delay Time  
PC Monitor Mode  
Eco Mode  
Auto  
Normal  
Off  
Auto  
Normal  
Off  
Auto  
Normal  
Off  
Off  
Normal  
Off  
Off  
Off  
Off  
Off  
Other  
Real Bit Driver  
100/120Hz CMD  
On  
On  
On  
On  
On  
On  
Off  
Off  
A-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Pro Game  
Signage  
CCTV HD CCTV SD Option  
0
0
0
0
0
0
0
0
0
0
0
0
Off  
Mode-2  
Mode-1  
Mode-2  
Mode-1  
Off  
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Mode-3  
Off  
Mode-2  
Medium  
Mode-3  
Medium  
Mode-4  
Medium  
Mode-2  
High  
Mode-6  
Off  
Auto  
Off  
On  
Auto  
Low  
On  
Auto  
Low  
On  
Auto  
Low  
On  
Auto  
Low  
On  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
Normal  
Off  
Middle  
Off  
Normal  
Off  
Normal  
Off  
Normal  
Off  
Short  
Off  
Off  
Off  
Off  
Off  
Off  
Off  
On  
Off  
On  
On  
On  
Off  
On  
On  
On  
On  
Off  
Off  
A-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set up the monitor for your  
PC  
Selecting the input signal  
When you connect a PC to the INPUT-3 terminal, set the type of the input  
signal accordingly.  
For signals in VGA60 and XGA60  
Set “Sampling Mode” to “Std”. (page 32)  
For signals in WVGA60  
Set “Sampling Mode” to “Wide”. (page 32)  
For signals in WXGA (1280), WXGA (1360) and WXGA60  
1 Set “Sampling Mode” to “Wide”. (page 32)  
2 Set “WXGA Select” as follows. (page 32)  
For signals in WXGA (1280): “1280*768”  
For signals in WXGA (1360): “1360*768”  
For signals in WXGA60: “1366*768”  
For signals in SXGA60  
Set “SXGA / SXGA+” to “SXGA”. (page 32)  
For signals in SXGA+60  
Set “SXGA / SXGA+” to “SXGA+”. (page 32)  
A-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the picture is not aligned vertically, or letters on the screen look  
blurred  
Set the aspect to “1:1”, and adjust “Dot Clock” and “Clock Phase”. (page  
33)  
For signals in 1920 x 1080, set the aspect to “Full” and adjust the same items.  
If the picture is cropped, or extra margins are displayed around it  
1 Set the aspect to “Full”.  
2 Adjust the position of the picture using “PC Position Adjustment”  
until the upper left corner of the picture is positioned at the upper  
left corner of the display.  
3 Adjust the size of the picture using “H Size” and “V Size” until the  
bottom right corner of the picture is positioned at the bottom right  
corner of the display.  
Enjoy SLR digital camera  
photographs  
When you select the picture preset of “Photo Pro” in “ Memory Setting ”, you  
can view the photographs just the way they were taken.  
You can also view photographs on an SD card or USB device using Photo  
viewer. (page 36)  
For JPEG pictures, select “sRGB” or “AdobeRGB” under the setting of “Color  
Space” (page 18) according to the setting of your camera, so that the  
photographs are displayed more faithfully to the original.  
It is recommended not to modify the settings of “Photo Pro”. In the initial  
setting of “Photo Pro”, “Color Space” is set to “sRGB”.  
A-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu index by task  
Page  
General tone of color  
Tint  
14  
19  
19  
18  
14  
14  
Tone of color (including white)  
Tone of color (in detail)  
Range of color representation  
Amplitude of the color difference signal  
Demodulation angle of the color  
difference signal  
Color Temperature  
White Balance Setting  
Color Space  
Tint Setting BY Gain  
Tint Setting BY/RY Angle  
Pattern of color correction  
Color correction (in detail)  
Color Management  
Color Mngmt. Setting Red Tint,  
Yellow Tint, etc.  
20  
20  
Total density of color  
Color  
14  
14  
14  
Amplitude of the color difference signal  
Demodulation angle of the color  
difference signal  
Tint Setting BY Gain  
Tint Setting BY/RY Angle  
Pattern of color correction  
Color correction (in detail)  
Color Management  
Color Mngmt. Setting Red Color,  
Yellow Color, etc.  
20  
20  
Total brightness of pictures  
Backlight  
16  
17  
17  
24  
Reduces backlight in bright scenes  
Reduces backlight in dark scenes  
Adjusts backlight depending on the  
luminance of the room  
Backlight Setting Smart Picture  
Backlight Setting Dynamic Backlight  
Eco Mode  
Total brightness of pictures  
Brightness  
Contrast  
Contrast Setting Black Stretch  
Contrast Setting Dynamic DC Offset  
Contrast Setting Auto Contrast  
Gamma  
15  
15  
15  
15  
15  
21  
21  
16  
Adjusts the gain of the signal level  
Emphasizes darker areas automatically  
Reduces brightness in bright scenes  
Emphasizes bright areas automatically  
Gamma correction value  
Adjusts gamma value automatically  
Sharpness  
Dynamic Gamma  
Sharpness  
Sharpness (in detail)  
Enhancer Setting  
Enhancer  
16  
16  
Frequency band to enhance  
Bass sound  
Treble sound  
Equalizer suited for the speakers  
Adjusts the delay time of sound  
Bass  
Treble  
PEQ  
25  
25  
26  
25  
Lip Sync  
A-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture  
Memory Setting  
You can store up to 6 sets of the “Picture” settings and use them.  
When the input is changed, the memory used for the input last time is  
automatically applied.  
Memory1 / Memory2 / Memory3 / Memory4 / Memory5 / Memory6  
Load Preset  
You can load one of the presets below into a memory.  
You can do further adjustment based on the loaded settings.  
Select a preset and press “Load” to load a preset.  
Dynamic : Makes pictures colorful and bright, suitable for watching in  
a well-light room.  
Standard : The most standard setting.  
Theater : Suitable for watching cinemas in a dark room.  
Monitor : Does not apply color adjustments or noise reductions.Input  
video signals are displayed as they are.  
Photo Pro : Suitable for watching still pictures of SLR digital cameras.  
Game : Gives priority to the response time for picture movement.  
Suitable for game consoles.  
Signage : Suitable for digital signage use in market, shops or hotels.  
CCTV HD : Suitable for monitoring CCTVs in HD format.  
CCTV SD : Suitable for monitoring CCTVs in SD format.  
Option : Suitable for displaying medical images including x-ray  
pictures.  
This setting is only for approximate presentation and does not conform to  
any official standard of medical imaging.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tint  
Adjusts the tone of color.  
–30 – +30 (Skin color reddish Skin color greenish)  
Tint Setting  
Adjusts the tone of color in detail.  
The setting is fixed to 0 and unadjustable when “Color Space” is set to “sRGB”,  
“AdobeRGB”, or “x.v.Color”.  
The setting is fixed to 0 and unadjustable when “Color Space” is set to “Auto”  
and the xvYCC signal is input to the HDMI terminal.  
The setting is fixed to 0 and unadjustable when “PC Monitor Mode” is set to  
“On”.  
BY Gain  
Adjusts the amplitude of the B-Y color difference signal. You can modify  
the total coloring of the picture.  
–30 – +30 (Small amplitude Large amplitude)  
BY/RY Angle  
Adjusts the demodulation angle between the B-Y color difference signal  
and the R-Y color difference signal. You can modify the total coloring of  
the picture.  
–15 – +15 (Decreasing the angle Increasing the angle)  
Color  
Adjusts the density of color.  
–30 – +30 (Dilute Dense)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contrast  
Adjusts the brightness of brighter areas of pictures.  
–30 – +30 (Dark Bright)  
Contrast Setting  
Adjusts settings of functions relating with contrast.  
The functions are not available when “Color Space” is set to “sRGB” or  
“AdobeRGB”.  
The functions are not available when “PC Monitor Mode” is set to “On”.  
Black Stretch  
Emphasizes darker areas depending on the characteristics of a picture  
to make contrast clearer.  
High / Medium / Low / Off  
Dynamic DC Offset  
Controls the blackness of the picture automatically depending on the  
total brightness.  
On / Off  
Auto Contrast  
Emphasizes brighter areas depending on the characteristics of a picture  
to make contrast clearer.  
On / Off  
Brightness  
Adjusts blackness.  
–30 – +30 (Dark Bright)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpness  
Emphasizes outlines on a picture.  
The setting is unadjustable when “Enhancer” is set to “Off”.  
–30 – +30 (Fuzzy Sharp)  
Enhancer  
Selects the frequency band enhanced by “Sharpness”.  
Off : Deactivates the function.  
Mode-1 / Mode-2 / Mode-3  
(Emphasizes lower frequency band; for low-resolution picture ↔  
Emphasizes higher frequency band; for high-resolution picture)  
Enhancer Setting  
Adjusts the effects of “Enhancer” in detail.  
All the settings are unadjustable when “Enhancer” is set to “Off”.  
Detail  
Adjusts texture of surface.  
–15 – +15 (Weaker Stronger)  
H.Sharp  
Adjusts sharpness of horizontal outlines.  
–15 – +15 (Weaker Stronger)  
V.Sharp  
Adjusts sharpness of vertical outlines.  
–15 – +15 (Weaker Stronger)  
Backlight  
Adjusts the brightness of backlight.  
–30 – +30 (Darker Brighter)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Backlight Setting  
Adjusts settings of functions relating with backlight.  
Smart Picture  
Reduces the backlight automatically in dazzling scenes.  
On / Off  
Dynamic Backlight  
Reduces the backlight automatically in dark scenes to represent black  
deeper.  
High / Medium / Low / Off  
Color System  
Selects the color system for the picture signal which is input to INPUT-3  
from composite terminal.  
The setting is adjustable only when “Input-3 Setting” is set to “Composite”.  
(page 31)  
The setting is unadjustable when “PC Monitor Mode” is set to “On”.  
Auto : An appropriate color system is automatically applied  
depending on the type of the input signal. Normally select this.  
PAL/50 : When the color system is PAL.  
PAL/60 : When the color system is PAL 60.  
SECAM : When the color system is SECAM.  
NTSC3.58 : When the color system is NTSC 3.58.  
NTSC4.43 : When the color system is NTSC 4.43.  
PAL M : When the color system is PAL-M.  
PAL N : When the color system is PAL-N.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color Matrix  
Selects the color matrix used for color conversion.  
The setting is fixed to “Auto” and unadjustable when “Color Space” is set to  
“sRGB”, “AdobeRGB”, or “x.v.Color”.  
The setting is fixed to “Auto” and unadjustable when ”PC Monitor Mode” is  
set to “On”.  
The setting is fixed to “Auto” and unadjustable when “Color Space” is set to  
“Auto” and the xvYCC signal is input to the HDMI terminal.  
Auto : An appropriate color matrix is applied automatically.  
709 : The color matrix conforming ITU-R BT.709 is used for conversion.  
601 : The color matrix conforming ITU-R BT.601 is used for conversion.  
Color Space  
Changes the range of color representation.  
“sRGB” or “AdobeRGB” is selectable when “PC Monitor Mode” is set to “On”.  
Even when “Auto” is selected, the setting may not switch to “x.v.Color”  
automatically depending on the connected device or the connection status.  
Auto : Normally applies “Wide”. When the xvYCC signal is input to the  
HDMI terminal, “x.v.Color” is applied automatically. When the Photo  
viewer is selected, “Normal” is applied automatically.  
Normal : HDTV standard.  
Wide : The wide color gamut of the equipped LCD panel. (Wider than  
the HDTV standard.)  
x.v.Color : Color representation suitable for x.v.Color.  
sRGB : Color representation suitable for sRGB.  
AdobeRGB : Color representation suitable for AdobeRGB.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color Temperature  
Adjusts the color temperature (color tone). The higher the color  
temperature, the more bluish the picture.  
The setting is fixed to “Mode-5” and unadjustable when “Color Space” is set  
to “sRGB” or “AdobeRGB”.  
The setting is fixed to “Mode-5” and unadjustable when “PC Monitor Mode”  
is set to “On”.  
Mode-1 : Bluish display. (approx. 13000 K)  
Mode-2 : Less bluish than “Mode-1”. (approx. 11000 K)  
Mode-3 : For general purpose. (approx. 9300 K)  
Mode-4 : For special purposes including medical imaging. (approx.  
8000 K)  
Mode-5 : Standard setting. (approx. 6500 K)  
Mode-6 : For conformation of images for printing. (approx. 5000 K)  
Mode-7 : Significantly reddish setting intended for special usages in  
television studios. (approx. 3200 K)  
White Balance Setting  
Adjusts color temperature in detail; subtle control of RGB gradations.  
These settings are independent of the setting of “Color Temperature”.  
R Drive / G Drive / B Drive  
Adjusts the depth of R/G/B on bright areas.  
–30 – +30 (Dilute Dense)  
R Cutoff / G Cutoff / B Cutoff  
Adjusts the depth of R/G/B on dark areas.  
–30 – +30 (Dilute Dense)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Color Management  
Adjusts the total coloring of pictures. Three color management presets are  
available to suit a variety of color temperature settings.  
The setting is fixed to “Off” and unadjustable when “Color Space” is set to  
“sRGB”, “AdobeRGB”, or “x.v.Color”.  
The setting is fixed to “Off” and unadjustable when ”PC Monitor Mode” is set  
to “On”.  
The setting is fixed to “Off” and unadjustable when “Color Space” is set to  
“Auto” and the xvYCC signal is input to the HDMI terminal.  
Mode-1 : Improving the vividness of colors. Suitable for high color  
temperature.  
Mode-2 : Standard colors. Suitable for medium color temperature.  
Mode-3 : Improving the total toning of colors. Suitable for low color  
temperature.  
Off : Deactivates the function.  
Color Mngmt. Setting  
Adjusts the total coloring of pictures in detail.  
All the settings are fixed to 0 and unadjustable when ”Color Management” is  
set to “Off”.  
All the settings are fixed to 0 and unadjustable when “Color Space” is set to  
“sRGB”, “AdobeRGB”, or “x.v.Color”.  
All the settings are fixed to 0 and unadjustable when ”PC Monitor Mode” is  
set to “On”.  
All the settings are fixed to 0 and unadjustable when “Color Space” is set to  
“Auto” and the xvYCC signal is input to the HDMI terminal.  
Red Tint / Red Color  
Adjusts the tone/colorfulness of red colors.  
–15 – +15 (Magenta Yellow) / –30 – +30 (Dilute Dense)  
Yellow Tint / Yellow Color  
Adjusts the tone/colorfulness of yellow colors.  
–15 – +15 (Red Green) / –30 – +30 (Dilute Dense)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Green Tint / Green Color  
Adjusts the tone/colorfulness of green colors.  
–15 – +15 (Yellow Cyan) / –30 – +30 (Dilute Dense)  
Cyan Tint / Cyan Color  
Adjusts the tone/colorfulness of blue colors.  
–15 – +15 (Green Blue) / –30 – +30 (Dilute Dense)  
Skin Tint / Skin Color  
Adjusts the tone/colorfulness of skin colors.  
–15 – +15 (Red Yellow) / –30 – +30 (Dilute Dense)  
Color : Bright Area  
Adjusts the color depth of bright areas.  
–15 – +15 (Dilute Dense)  
Color : Dark Area  
Adjusts the color depth of dark areas.  
–15 – +15 (Dilute Dense)  
Gamma  
Adjusts the gamma correction value and controls the brightness and  
gradation of intermediately bright areas.  
Mode-1 : For confirmation of images for printing. (Equivalent to γ 1.8)  
Mode-2 : For general purpose. (Equivalent to γ 2.0)  
Mode-3 : Standard setting. (Equivalent to γ 2.2)  
Mode-4 : Setting designed according to general CRT property.  
(Equivalent to γ 2.4)  
Mode-5 : For viewing digital cinemas. (Equivalent to γ 2.6)  
Mode-6 : For special purposes including medical imaging. Complies  
with GSDF (Grayscale Standard Display Function).  
Mode-7 : Dark areas are brighter when compared to “Mode-3”.  
Dynamic Gamma  
Adjusts gamma value automatically depending on the brightness of  
pictures.  
High / Medium / Low / Off  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Noise Reduction  
Adjusts the settings of picture noise reduction.  
The functions are unavailable when “PC Monitor Mode” is set to “On” or  
when signals in a PC signal format are coming in.  
Digital VNR  
Reduces picture noise.  
Auto : Estimates the amount of noise automatically and applies  
suitable noise reduction processing.  
High / Medium / Low / Off  
MPEG NR  
Reduces noise on MPEG pictures such as mosquito-noise and block-  
noise.  
High / Low / Off  
3DY/C  
Detects the type of the picture signal (movie or still picture) which is input  
to INPUT-3 from composite terminal and applies a suitable Y/C separation  
process to each type.  
Unavailable when “Picture Delay Time” is set to “Short”.  
Unavailable when the format of the incoming signal is other than NTSC 3.58,  
PAL50, PAL M or PAL N.  
On / Off  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Natural Cinema  
Displays quick-moving parts on cinemas originally taken on films with  
more clarity.  
The setting is fixed to “Off” and unadjustable when “Picture Delay Time” is set  
to “Short”.  
The setting is fixed to “Off” and unadjustable when “PC Monitor Mode” is set  
to “On”.  
The setting is fixed to “Off” and unadjustable when progressive picture signal  
is input.  
Auto / Off  
Picture Delay Time  
Adjusts the time spent for picture-improving processes. The delay time  
becomes shorter though picture quality is down when the processes are  
skipped.  
The setting is fixed to “Short” and unadjustable when “PC Monitor Mode” is  
set to “On”.  
Normal : The picture-improving processes are fully applied, giving  
priority to picture quality.  
Middle : Some picture-improving processes are skipped to decrease  
the delay time.  
Short : Most of picture-improving processes are skipped to decrease  
the delay time more.  
PC Monitor Mode  
Sets the monitor for use as a PC monitor.  
Only menu items which are necessary for PC monitors are activated.  
Input signals from HDMI terminals are recognized as PC signals (R:G:B = 4:4:4)  
and are processed appropriately.  
On / Off  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Eco Mode  
Adjusts the brightness of backlight depending on the luminance of the  
room to reduce power consumption.  
Display : Activating the function and indicating its performance.  
On : Activating the function. Its performance is not indicated.  
Off : Deactivates the function.  
Other  
Real Bit Driver  
Makes the gradation of 8 bit signals natural and smooth.  
Also effective on signals not in 8 bit.  
On / Off  
100/120Hz CMD  
Doubles the number of frames per second to reduce image blur.  
The setting is fixed to “Off” and unadjustable when “Color Space” is set to  
“sRGB” or “AdobeRGB”.  
The setting is fixed to “Off” and unadjustable when “Picture Delay Time” is set  
to “Short”.  
The setting is fixed to “Off” and unadjustable when “PC Monitor Mode” is set  
to “On”.  
On / Off  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound  
The following settings are not adjustable while using the Photo viewer (➔  
page 36).  
Bass  
Adjusts bass tone.  
–6 – +6 (Weaker Stronger)  
Treble  
Adjusts treble tone.  
–6 – +6 (Weaker Stronger)  
Balance  
Adjusts sound balance.  
L10 – 10R (To the left To the right)  
Auto Volume Control  
Turns down the volume automatically when an excessive strong sound  
signal is input.  
On / Off  
Lip Sync  
Adjusts the delay time of sound.  
–3 – +3 (The sound starts earlier The sound starts later)  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PEQ  
Optimizes the sound for the monitor’s supplied speaker unit. When the  
speaker unit is connected, setting “PEQ“ to “On“ brings high and low tones  
into balance, making the sound clearer.  
Select “Off“ when connecting other speakers.  
“PEQ” stands for “Parametric Equalizer”.  
On / Off  
Turn On Volume  
Adjusts the initial volume when turning on the monitor.  
0 – 50  
Current : Setting the current volume to the initial.  
If the setting value surpass that of “Volume Limit”, the initial volume at  
turning on becomes the maximum value set for “Volume Limit”.  
Amplifiers connected to an HDMI terminal ignore this setting.  
Volume Limit  
Sets the maximum volume to prevent unexpectedly loud sound  
reproduction.  
0 – 50  
Amplifiers connected to an HDMI terminal ignore this setting.  
Reset  
Restores the settings of “Sound” to the initial.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Menu Language  
You can choose the language used for on-screen messages.  
English (EU) / Deutsch / Français(UE) / Italiano / Español (UE) /  
Català / Nederlands / Dansk / Svenska / Norsk / Suomi / Polski /  
Magyar / Русский / Ελληνικά / Português / Česky / Български /  
Українська/ Türkçe / Română /  
/
/
/
/
Bahasa Melayu / / Español (US) / Français(US) / English (US) /  
Front Panel Lock  
Makes operations through the buttons on the monitor ineffective.  
On : Making the buttons on the monitor ineffective.  
Off : Making the buttons on the monitor effective.  
You can turn on/off the power by pressing and holding the [ ] button on the  
monitor for more than 3 seconds even when the setting is “On”.  
You can change the setting to “Off” by pressing and holding the [MENU]  
button on the monitor for more than 3 seconds.  
The settings returns to “Off” after disconnecting the power cord.  
Auto Shut Off  
Turns off the monitor automatically when no signal comes in.  
On : Turns off the monitor automatically when no signal comes in for  
10 minutes or no operation is done for 4 hours.  
Off : Deactivates the function.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Aspect  
Adjusts the aspect of pictures.  
The setting is also adjustable through the [ASPECT] button on the remote  
control.  
Options when the current input signal is SD  
Auto : When the video signal contains information about aspect ratio  
(WSS etc.), the aspect is switched accordingly. In other cases, the  
picture is displayed in either “Regular” or “Panoramic”, depending on  
the setting of “4:3 Aspect Setting” (page 31).  
Regular : No modifying of aspect.  
Black areas remain at the left and  
right side of the picture.  
Panoramic : Zooming a picture to  
the width of the monitor without  
unnatural deformation.  
14:9 Zoom : Zooming a 14:9-aspect  
picture in the way that the upper and  
lower black bands are edged out.  
Black areas remain at the left and  
right side of the picture.  
You cannot select “14:9 Zoom” for  
signals in 480i and 480p.  
16:9 Zoom : Zooming a picture in  
the way that the upper and lower  
black bands in a cinema program are  
edged out.  
16:9 Zoom Subtitle : Zooming a  
picture in the way that the upper  
and lower black bands of a cinema  
program are edged out leaving  
space for captions.  
Full : Stretching a picture to the  
width of the monitor.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Options when the current input signal is HD  
You can select “Full Native” only when the input signal is 1080i/p.  
Full : Stretching a picture to the  
width of the monitor.  
Full Native : Displaying a picture  
of 1080i/p without enlargement.  
Slim : Shrinking a picture  
horizontally. Black areas remain  
at the left and right side of the  
picture.  
Panoramic Zoom : Zooming  
a picture without unnatural  
deformation in the way to edge  
out the black parts around a  
4:3-aspect cinema program  
transferred through 16:9-aspect  
signal.  
Options when the current input signal is from a PC  
You cannot select “Just” and “1:1” for some input signals.  
Full : Stretching a picture to the  
width of the monitor.  
Just : No modifying of aspect. Black  
areas remain at the left and right  
side of the picture.  
1:1 : No modifying of aspect or  
resolution. Black areas remain  
around the picture.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Position Adjustment  
Adjusts the picture position on the monitor.  
Vertical adjustment is effective when “Aspect” is set to “14:9 Zoom”, “16:9  
Zoom”, “Panoramic”, “16:9 Zoom Subtitle”, or “Panoramic Zoom”.  
Horizontal adjustment is effective only when “Aspect” is set to “Panoramic  
Zoom”.  
When a PC signal is input, adjust the position on “PC Position Adjustment” in  
”PC Setting”.  
The positioning is reset as the power is turned off.  
The positioning is reset as the signal format changes.  
The positioning is reset as the signal aspect changes.  
Power Indicator  
Sets the action of the power indicator.  
On : The power indicator remains lit while the power is on.  
Off : The power indicator does not light.  
The power indicator lights regardless of this setting if no signal is input while  
the power is on.  
Display  
Displays the source indication.  
On / Off  
The source indication appears regardless of this setting if no signal is input.  
The source indication is displayed for 4 seconds after changing the source  
even if the setting is “Off”.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Label  
Adds a source name specifying a device after the source name (“Input-1” -  
“Input-3”).  
(No label) / VCR / DVD / Blu-ray Disc / PVR / D-VHS / STB / SAT /  
AMP / GAME / CAM / DISC / PC  
4:3 Aspect Setting  
Selects the aspect setting which is applied when “Aspect” (page 28)  
is set to “Auto”. The picture is displayed in the selected aspect when the  
aspect is 4:3 or when the monitor cannot detect the aspect of a picture.  
Regular : Displays the picture in “Regular”.  
Panoramic : Displays the picture in “Panoramic”.  
1080 Auto Setting  
Selects the default aspect for 1080i/p signals.  
Full : Expands the picture to the full display size.  
Full Native : Displays the picture in the same magnification (100%  
scan).  
Input-3 Setting  
Selects the signal type for the INPUT-3 terminal (D-sub 15 pin).  
Use the supplied conversion cables and other cords according to the type of  
connection. (page 06)  
PC : For PC signals  
Component : For component signals  
Composite : For composite signals  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC Setting  
Adjusts the settings for PC signals.  
The items below are unadjustable when no PC signal is input: “H Size”,  
“V Size”, “Dot Clock”, “Clock Phase”, “PC Position Adjustment”, and “Auto  
Position Adjustment”.  
“Auto Position Adjustment” is unavailable for INPUT-3.  
“Dot Clock” and “Clock Phase” are unavailable for INPUT-1, INPUT-2.  
Sampling Mode  
Sets the display size for an analog input signal.  
Std : For VGA60 and XGA60 signals  
Wide : For WVGA60, WXGA (1280), WXGA (1360) and WXGA60 signals  
WXGA Select  
Sets the display size for an analog input signal.  
1280*768 : For WXGA (1280) signal  
1360*768 : For WXGA (1360) signal  
1366*768 : For WXGA60 signal  
SXGA / SXGA+  
Sets the display size for an analog input signal.  
SXGA : For SXGA60 signal  
SXGA+ : For SXGA+60 signal  
H Size  
Adjusts the picture width.  
–20 – +20 (Smaller Larger)  
V Size  
Adjusts the picture height.  
–20 – +20 (Smaller Larger)  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dot Clock  
Adjust this when the picture is not aligned vertically.  
The adjustment is kept after turning off the power.  
–20 – +20  
Clock Phase  
Adjust this when letters on the screen look blurred or swaying.  
The adjustment is kept after turning off the power.  
0 – 31  
PC Position Adjustment  
Adjusts the picture position on the monitor.  
The adjustment is kept after turning off the power.  
Auto Position Adjustment  
Adjusts the picture position automatically.  
Reset  
Restores the settings of “PC Setting” to the initial.  
Reset  
Restores the settings of “Setup” to the initial.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI  
Control with HDMI  
Makes an HDMI CEC-compatible external component controllable through  
this monitor.  
On : Enables HDMI CEC control.  
Off : Deactivates HDMI CEC control.  
One Touch Play  
Starting playback on an HDMI CEC-compatible external component  
automatically turns on the monitor and change its source to the  
component.  
The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set  
to “Off”.  
Dedicated HDMI components cooperate with the monitor regardless of the  
setting.  
On / Off  
Power Off Link  
Turning off the monitor automatically turns off an HDMI CEC-compatible  
external component.  
The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set  
to “Off”.  
Dedicated HDMI components cooperate with the monitor regardless of the  
setting.  
On / Off  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AMP Control  
Makes an HDMI CEC-compatible amplifier controllable through the  
monitor.  
The setting is fixed to “Off” and unadjustable when “Control with HDMI” is set  
to “Off”.  
On / Off  
Input-1 Audio  
Selects the audio signal type for INPUT-1.  
Auto : Detects the type automatically.  
Digital : For HDMI equipment.  
Analogue : For DVI equipment.  
Reset  
Restores the settings of “HDMI” to the initial.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing photographs on  
SD card/USB device  
Cautions  
Insert or remove SD cards and USB devices gently and in the right direction.  
Otherwise, the devices or the monitor may be damaged.  
It is recommended to keep a backup of your files.  
Do not connect a mouse, keyboard or the like.  
Do not use a USB hub or extension cable.  
1 Insert an SD card/USB device into the SD card slot/USB  
terminal on the side of the monitor.  
SD card cover  
(supplied)  
Screw  
(ø2 x 6 mm,  
supplied)  
Slide the SD card into the  
slot until it clicks into place.  
To remove the SD card,  
push it in until it clicks and  
then pull it out.  
Attach the SD card cover  
using the supplied screw to  
prevent theft.  
2 Set the input to “Input-4”.  
The Folder Index shows a list of folders and photographs on the device .  
SD Card  
Photo Viewer  
Folder Index  
Folder 1  
Page 1 / 2  
Folder 1  
Summer08  
Summer09  
01_090812...  
Photo_225...  
01_090902...  
Cat_in_yard...  
Cat_sleepi...  
LakeCom...  
Rouisev...  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To view the next/previous page, press [GREEN]/[RED].  
When you turn on the monitor while both an SD card and a USB device are  
connected, the photographs on the SD card are displayed. Select “Flash  
Device“ in the “Device” setting (page 38) to display the photographs on the  
USB device.  
The thumbnails of some files may not be shown.  
This monitor can only display file names as alphabetical letters.  
Photographs with large file-sizes may take a while to be displayed.  
3 Select a photograph to display, and press [OK].  
The selected photograph is displayed full-screen.  
Some files may be displayed with bands around the edges.  
To show the photographs in a folder, press [OK] on the folder.  
To see the next/previous photograph, press [ ]/[ ].  
To exit the full-screen display and show the Folder Index, press [EXIT].  
To exit the photograph display  
Select an input other than “Input-4”.  
To view photographs in slide show  
1 Press [YELLOW] in the Folder Index.  
The slide show starts from the selected photograph.  
To pause/resume the slide show, press [OK].  
To display the photographs in a random order, press [BLUE] in the  
Folder Index.  
To finish the slide show, press [BACK].  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To customize the settings  
1 Open the menu.  
Photo Viewer  
SD Card  
Viewer Option  
Device  
Sort  
SD Card  
Date  
10 sec  
Interval Time  
Transition  
Box  
Initial Mode  
Folder Index  
2 Change the settings.  
3 Exit the menu.  
Device  
Select which device is displayed when both are connected; SD card or  
USB device.  
Sort  
Select the display order of photographs.  
File Name : In alphabetic order by file name.  
Date : In order of the date when the file was modified.  
Interval Time  
Select how long each picture is displayed for during slide shows.  
Transition  
Select the transition effect used during slide shows.  
Initial Mode  
Select the initial mode of the Photo viewer function. Either the Folder  
Index is displayed, or a slide show is started automatically.  
Menu items are displayed in English if you have selected “  
”, “ ”, “ ” in “Menu Language” of “Setup”.  
”, “  
” or  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About SD cards and USB devices  
The maximum capacity of devices playable on this monitor is as follows:  
- SD cards, miniSD cards, microSD cards: 2 GB  
- SDHC cards, miniSDHC cards, microSDHC cards: 32 GB  
- USB devices: 32 GB  
When using miniSD cards or microSD cards, put them in an appropriate  
adapter before inserting them into the monitor.  
Use SD cards which are guaranteed to work between –25 °C and 85 °C.  
Not all SD cards or USB devices are guaranteed to work on this monitor.  
Format SD cards on a photographing device such as a digital camera, or  
on a computer using SD memory card formatting software.  
Format USB devices on a computer in “FAT 32” or “FAT”.  
Playable files  
Format: JPEG (.jpg, .JPG)  
Pixel size: 160 x 120 – 8192 x 8192 (The file size must be under 10 MB.)  
Picture files of other than JPEG format, Progressive JPEG files, JPEG 2000  
files, MOTION JPEG files or music files cannot be played back.  
About the displaying of pictures  
Filenames which are too long may be shortened when displayed.  
If you have edited or copied picture files on a computer, their date  
properties may have been modified, and their thumbnail may have been  
deleted.  
Some picture files may not be displayed properly due to the device which  
created them.  
It may take some time before pictures are displayed when the device  
contains a large number of files or folders.  
This monitor can display up to 9,999 files.  
Pictures in a folder deeper than the eighth layer of subfolders may not be  
displayed.  
When selecting a file of a format which is not supported, its thumbnail  
may be displayed instead.  
Picture quality can be adjusted using the items in the “Picture” menu.  
However, some of them are not available for the Photo viewer.  
If the screen as illustrated on the right is  
displayed, the Photo viewer is starting up. Wait  
for a while until it is ready.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Control  
You can control LT-32WX50 from external control equipment (a personal  
computer or a dedicated controller) via the RS-232C terminal on the rear of  
the monitor.  
Connect the RS-232C extension cable to the RS-232C terminal on the  
rear side of the monitor. (page 07)  
Communication specifications  
Cable  
A crossover cable with a RS-232C connector  
Communication specifications  
Baud Rate:  
Data Bits:  
Parity:  
Stop Bits:  
Flow Control:  
19200 bps  
8 bits  
Odd parity  
1 bit  
No control  
Communication Code: ASCII Code  
Terminal specifications  
Pin No.  
Signal  
RXD  
TXD  
1
2
3
4
5
6
7
8
9
GND  
This is a male  
terminal.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command outline  
To control the monitor from external control equipment, send operation  
commands to the monitor.  
Example of communication procedures  
LT-32WX50  
1
! 0x82 0x80 IP 3 Lf  
External control  
equipment  
3
2 Ack 0x82 0x80 IP 3 Lf  
1Operation command to select “Input-3”.  
2Acknowledgment from the monitor.  
3The input is changed to “Input-3”.  
Command structure  
! 0x82 0x80 IP 3 Lf  
a
b
c
d
e
f
a: Header  
! : Operation command from the external control  
device.  
? : Enquiry command from the external control  
device.  
@ : Response from the monitor to an enquiry  
command.  
Ack (0x06): Positive acknowledge from the monitor.  
Nak (0x15): Negative acknowledge from the  
monitor.  
b: Device ID  
0x82 (fixed)  
c: Monitor ID  
d: Command  
e: Data  
0x80 – 0xFF (Default setting is 0x80.)  
See “Command list” on the next page.  
f: Termination  
Lf (0x0A)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Command list  
“ ” is the monitor ID. Normally, set it to “0x80”.  
*
Enter the appropriate data to “xx” or “x”.  
No.  
Operation commands  
1†  
!
0x82  
*
P
W
x
x
Lf  
Lf  
2†  
!
0x82  
*
I
P
3†  
4†  
5†  
!
!
!
0x82  
0x82  
0x82  
*
*
*
V
A
V
L
M
S
x
x
x
x
Lf  
Lf  
Lf  
6†  
!
0x82  
*
A
S
x
Lf  
7
8
!
!
0x82  
0x82  
*
*
R
S
C
U
x
I
x
C
x
x
x
x
Lf  
Lf  
9
!
!
0x82  
0x82  
*
*
S
S
U
U
R
F
M
K
x
x
Lf  
Lf  
10††  
For these commands, you can make enquiry commands by entering “?” instead  
of “!” and omitting the data bytes. When you send an enquiry command, the  
monitor sends back an acknowledge, then an answer about its current status.  
†† When you change this setting, setting of “Front Panel Lock” (page 27) is also  
changed accordingly.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functions  
Data  
0: Off  
Turns on/off the monitor.  
1: On  
+: Switches the power status.  
1: Input-1  
2: Input-2  
3: Input-3  
Selects the input.  
4: Input-4  
00 – 50: Sets the volume directly.  
+: Turns the volume up.  
–: Turns the volume down.  
0: Mute is released.  
Adjusts the volume.  
Turns muting on/off.  
1: The sound is muted.  
+: Switches the mute status.  
0: Memory1 / 1: Memory2 / 2: Memory3 /  
3: Memory4 / 4: Memory5 / 5: Memory6 /  
+, –: Changes the setting.  
0: Panoramic, Panoramic Zoom /  
1: 16:9 Zoom / 2: Full / 3: Regular, Slim /  
4: Full Native / 5: 14:9 Zoom /  
6: 16:9 Zoom Subtitle / 7: Just /  
8: 1:1 / 9: Auto /  
Selects an item of “ Memory Setting ”  
(page 13).  
Selects the aspect ratio.  
+, –: Changes the aspect ratio setting.  
0x0000 – 0xFFFF†††  
Sends the remote control code pass-through.  
Sets the monitor ID.  
0x80 – 0xFF  
Enables/disables operations from the remote  
control.  
0: Disabled.  
1: Enabled.  
0: Disabled.  
1: Enabled.  
Enables/disables operations from the touch  
sensor panel.  
†††  
LINK  
0F78  
0F0C  
030A  
037A  
037C  
037B  
035B  
BACK  
EXIT  
03E6  
0F1D  
233C  
233D  
YELLOW  
BLUE  
233E  
233F  
OPTION  
OK  
RED  
MENU  
GREEN  
035A  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The following are not malfunctions.  
This LCD display is built with very high precision technology; however,  
be aware that a few pixels may be missing or constantly lit.  
When a still image is displayed for a long time, it may remain  
indistinctly on the screen after the picture has changed. The remaining  
picture will disappear after a while.  
The following symptoms are problems only when pictures or sounds  
are not played back normally.  
A slight electric shock occurs when you touch the monitor.  
The top and/or rear panel of the monitor becomes hot.  
The monitor emits a cracking noise.  
The monitor emits a mechanical noise.  
If the monitor does not operate normally, perform the following to  
reset the monitor.  
Unplug the monitor from the wall outlet, and plug it in again.  
Cannot turn on the monitor.  
Connect the power cord properly. (page 08)  
The remote control does not work.  
Insert the batteries in the correct direction. (page 04)  
Replace the batteries with new ones.  
Aim the remote control to the remote sensor on the monitor.  
(page 09)  
The effective range of the remote control is about 7 meters (23 feet).  
Get closer to the monitor.  
Remove any obstruction between the remote control and the monitor.  
No picture from a connected device.  
Select the correct input on the monitor.  
Connect the external device properly.  
Turn on the external device and start playback.  
The monitor turns off automatically.  
When you want to display a picture on the monitor for a long time,  
select “Off” for “Auto Shut Off” (page 27) in “Setup”.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No sound.  
Press the MUTING button.  
Check the amplifier connection.  
When “AMP” is selected under “Speaker”, the sound is output from the  
amplifier, and not from the speakers of the monitor. (page 11)  
No picture from HDMI devices.  
Select the correct input on the monitor.  
Use a cable marked with the HDMI logo.  
Please use a High Speed HDMITM Cable. High Speed HDMITM Cables are  
tested to carry an HD signal up to 1080p and higher. (page 07)  
No sound from HDMI devices.  
Set “Input-1 Audio” properly. (page 35)  
Cannot control HDMI CEC devices.  
Set “Control with HDMI” to “On”. (page 34)  
Some devices may not accept controls by HDMI CEC.  
Cannot operate the product using the buttons on the monitor.  
Set “Front Panel Lock” to “Off”. (page 27)  
Picture from a computer is strange.  
Adjust the items under “PC Setting”. (page 32)  
The source indication stays on the display.  
Turn on the selected external device and start playback.  
When no signal is input, you cannot turn off the source indication.  
The picture and the sound do not synchronize.  
Adjust “Lip Sync”. (page 25)  
Adjust “Picture Delay Time”. (page 23)  
Colors are strange.  
Adjust the items under “Picture”. (page A-2)  
Load one of the picture presets to discard the current settings and  
apply the selected preset. (page A-3)  
No pictures displayed from an SD card/USB device.  
Check whether the picture files are of the supported format.  
(page 39)  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model name  
LCD panel  
Screen size (visible  
LT-32WX50  
32-inch (viewable)  
801.3 mm (31.5’’)  
area size measured  
diagonally)  
Display resolution  
Display colors  
1920×1080  
1.07 billion colors (10 bit color)  
178 ° (Horizontally)  
Viewing angle (TYP.)  
178 ° (Vertically)  
Luminance (TYP.)  
Contrast ratio (TYP.)  
Panel response  
400 cd/m2  
4000 : 1  
6.5 msec (G to G)  
speed  
Horizontal/  
Horizontal: 24.83 kHz – 67.5 kHz  
Vertical: 56.42 Hz – 75 Hz  
vertical frequency  
(computer signal)  
Compliant video  
page 50  
signal formats  
Speakers  
Audio output  
Operating  
ø 34 mm × 6 (Bass Reflex Box)  
Speakers: 5 W + 5 W  
Operating temperature: 0 °C – 40 °C (32 °F – 104 °F)  
environment  
Operating humidity: 20 % – 80 % (non-condensing)  
(Slightly variable depending on ambient conditions  
for installation.)  
Power requirements  
AC adapter  
DC 28V  
AC 100 V - 240V, 50 Hz/60 Hz  
(FSP180-AKAN1)  
Power consumption  
136 W  
Power consumption  
(on standby)  
Dimensions  
Mass  
AC 230 V: 0.55 W  
AC 120 V: 0.67 W  
page 48  
5.7 kg (12.6 lbs) (without the stand)  
6.9 kg (15.2 lbs) (including the stand)  
6.4 kg (14.1 lbs) (including the VESA bracket)  
7.6 kg (16.8 lbs) (including the stand and the speakers)  
7.1 kg (15.7 lbs) (including the VESA bracket and the  
speakers)  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied accessories  
Input terminals  
page 04  
HDMI ×2, D-sub (15 pin) ×1, Audio input (3.5 mm  
stereo mini jack), USB type slot, SD card slot  
Speaker output  
Output terminals  
External control  
RS-232C-compliant  
Display Calibration  
When you want to calibrate the gamma and the white balance of the  
monitor, you can download a dedicated software from the web page  
below.  
To perform the calibration, you need i1Display 2 of X-Rite Incorporated  
and a Windows PC.  
Notice on transportation  
This monitor is precision equipment and needs dedicated packing  
material for transportation. Never use any packing material supplied  
from sources other than JVC or JVC-authorized dealers.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensions  
unit: mm (inch)  
1 : 496.1 (19 5/8)  
2 : 55.0 (2 1/4)  
/80.0 (3 1/4)*  
3 : 772.4 (30 1/2)  
4 : 40.7 (1 5/8)  
5 : 254.0 (10)  
7 : 46.5 (1 7/8)  
8 : 544.1 (21 1/2)  
! : 99.8 (4)  
@ : 133.7 (5 3/8)  
# : 136.0 (5 3/8)  
$ : 100.0 (4)  
% : 100.0 (4)  
^ : 45.0 (1 7/8)  
& : 45.0 (1 7/8)  
9 :  
7.8 (3/8)  
0 : 22.5 (1)  
- : 190.9 (7 5/8)  
= : 173.7 (6 7/8)  
~ : 336.2 (13 1/4)  
6 : 214.7 (8 1/2)  
* with the speaker unit  
Use screws of adequate length (M4 × 12 – 16) to fix the VESA bracket  
and wall mount adapter.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Logos & Licenses  
As an “ENERGY STAR®” partner, JVC has determined that  
this product or product model meets the “ENERGY STAR®”  
guidelines for energy efficiency.  
For easy understanding, pictures and illustrations are shown by being  
emphasized, omitted or composed, and may slightly be different from actual  
products.  
Design and specifications are subject to change without notice.  
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks  
or registered trademarks of HDMI Licensing LLC.  
“x.v.Color” and “x.v.Color” logo are trademarks.  
All company names and product names mentioned herein are used for  
identification purposes only, and may be the trademarks or registered  
trademarks of their respective companies.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliant signal formats (1)  
INPUT-3 terminal (PC)  
Frequency  
Horizontal (kHz)  
24.823  
31.469  
37.861  
37.500  
31.020  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
47.776  
47.712  
48.363  
63.981  
63.981  
65.220  
45.000  
67.500  
Signal  
Vertical (Hz)  
Dot clock (MHz)  
21.050  
PC98  
VGA 60†1  
56.42  
59.94  
72.81  
75.00  
60.00  
60.32  
72.19  
75.00  
60.00  
70.07  
75.03  
59.87  
60.02  
60.00  
60.02  
60.02  
60.00  
60.00  
60.00  
25.175  
VGA 72  
31.500  
VGA 75  
WVGA 60†2  
31.500  
33.750  
SVGA 60  
40.000  
SVGA 72  
50.000  
SVGA 75  
XGA 60†1  
49.500  
65.000  
XGA 70  
75.000  
XGA 75  
78.750  
WXGA(1280)†2†3  
WXGA(1360)†2†4  
WXGA 60†2†5  
SXGA 60†6  
SXGA+ 60†7  
SXGA+ 60*  
1280x720  
1920x1080  
79.500  
85.500  
86.715  
108.000  
108.000  
122.614  
74.250  
148.500  
†1 : Set “Sampling Mode” to “Std”.  
†2 : Set “Sampling Mode” to “Wide”.  
†3 : Set “WXGA Select” to “1280*768”.  
†4 : Set “WXGA Select” to “1360*768”.  
†5 : Set “WXGA Select” to “1366*768”.  
†6 : Set “SXGA / SXGA+” to “SXGA”.  
†7 : Set “SXGA / SXGA+” to “SXGA+”.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Total pixels  
pixel per line line per frame  
Effective pixels  
pixel per line line per frame  
Standard  
848  
800  
440  
525  
520  
500  
517  
628  
666  
625  
806  
806  
800  
798  
795  
806  
1066  
1066  
1087  
750  
1125  
640  
640  
400  
480  
480  
480  
480  
600  
600  
600  
768  
768  
768  
768  
768  
768  
1024  
1050  
1050  
720  
1080  
VESA Standard  
VESA Standard  
VESA Standard  
832  
640  
840  
640  
1088  
1056  
1040  
1056  
1344  
1328  
1312  
1664  
1792  
1793  
1688  
1688  
1880  
1650  
2200  
848  
800  
VESA Standard  
VESA Standard  
VESA Standard  
VESA Standard  
VESA Standard  
VESA Standard  
800  
800  
1024  
1024  
1024  
1280  
1360  
1366  
1280  
1400  
1400  
1280  
1920  
VESA Standard  
VESA Standard  
EIA/CEA-861-D  
Signals in a format not listed above may not be displayed properly. Change the  
resolution setting on the PC.  
Some signals may not be displayed properly even if their format is in the list  
above.  
Because signals in PC98, VGA 72, VGA 75, SVGA 72, SVGA 75, XGA 70 and XGA  
75 need to be converted into 60Hz before displayed on the monitor, playback  
of these signals look jerky. Select other signal formats for smoother playback of  
moving pictures.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliant signal formats (2)  
INPUT-3 terminal (composite)  
INPUT-3 terminal (component)  
Frequency  
Frequency  
Signal  
Signal  
Vertical (Hz) Horizontal (kHz)  
Vertical (Hz) Horizontal (kHz)  
PAL/50  
PAL/60  
SECAM  
NTSC3.58  
NTSC4.43  
PAL M  
50.00  
59.94  
50.00  
59.94  
59.94  
59.94  
50.00  
15.63  
15.73  
15.63  
15.73  
15.73  
15.73  
15.63  
480/60i  
59.94  
50.00  
59.94  
50.00  
59.94  
50.00  
59.94  
50.00  
59.94  
50.00  
29.97  
24.00  
15.73  
15.63  
31.47  
31.25  
44.96  
37.50  
33.72  
28.13  
67.43  
56.25  
33.72  
27.00  
576/50i  
480/60p  
576/50p  
720/60p  
720/50p  
1080/60i  
1080/50i  
1080/60p  
1080/50p  
1080/30p  
1080/24p  
PAL N  
INPUT-1, INPUT-2 terminal (HDMI-HDMI)  
Frequency  
Signal  
Vertical (Hz)  
59.94/60  
59.94/60  
59.94/60  
59.94/60  
59.94/60  
59.94/60  
50.000  
Horizontal (kHz)  
31.469/31.5  
31.469/31.5  
44.955/45  
33.716/33.75  
15.734/17.75  
67.433/67.5  
31.25  
Dot clock (MHz)  
25.175/25.2  
27/27.027  
74.176/74.25  
74.176/74.25  
27/27.027  
148.352/148.5  
27  
VGA 60  
480/60p  
720/60p  
1080/60i  
480/60i  
1080/60p*  
576/50p  
720/50p  
1080/50i  
576/50i  
50.000  
37.5  
74.25  
50.000  
28.13  
74.25  
50.000  
15.63  
27  
1080/50p  
1080/24p  
1080/25p  
1080/30p  
50.000  
56.25  
148.5  
23.976/24  
25.000  
26.973/27  
28.13  
74.176/74.25  
74.25  
29.97/30  
33.716/33.75  
74.176/74.25  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Total pixels  
pixel per line  
Effective pixels  
pixel per line  
line per frame  
525  
line per frame  
480  
800  
858  
640  
720  
525  
480  
1650  
2200  
858  
750  
1280  
1920  
720  
720  
562/563  
262/263  
1125  
1080  
480  
2200  
864  
1920  
720  
1080  
576  
625  
1980  
2640  
864  
750  
1280  
1920  
720  
720  
562/563  
312/313  
1125  
1080  
576  
2640  
2750  
2640  
2200  
1920  
1920  
1920  
1920  
1080  
1080  
1080  
1080  
1125  
1125  
1125  
* EIA/CEA-861-D-compliant  
Signals in a format not listed above may not be displayed properly. Change the  
resolution setting on the PC.  
Some signals may not be displayed properly even if their format is in the list  
above.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This software is based in part on the work of the lndependent JPEG Group.  
The open source software is embedded in this product. For more  
information, please go to:  
DejaVu font is used in this product under the license below.  
_____________________________________________________  
Fonts are (c) Bitstream (see below). DejaVu changes are in public domain. Glyphs imported from  
Arev fonts are (c) Tavmjong Bah (see below)  
Bitstream Vera Fonts Copyright  
------------------------------  
Copyright (c) 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera is a trademark of  
Bitstream, Inc.  
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts  
accompanying this license (“Fonts”) and associated documentation files (the “Font Software”),  
to reproduce and distribute the Font Software, including without limitation the rights to use,  
copy, merge, publish, distribute, and/or sell copies of the Font Software, and to permit persons  
to whom the Font Software is furnished to do so, subject to the following conditions:  
The above copyright and trademark notices and this permission notice shall be included in all  
copies of one or more of the Font Software typefaces.  
The Font Software may be modified, altered, or added to, and in particular the designs of  
glyphs or characters in the Fonts may be modified and additional glyphs or characters may be  
added to the Fonts, only if the fonts are renamed to names not containing either the words  
“Bitstream” or the word “Vera”.  
This License becomes null and void to the extent applicable to Fonts or Font Software that has  
been modified and is distributed under the “Bitstream Vera” names.  
The Font Software may be sold as part of a larger software package but no copy of one or more  
of the Font Software typefaces may be sold by itself.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK,  
OR OTHER RIGHT. IN NO EVENT SHALL BITSTREAM OR THE GNOME FOUNDATION BE LIABLE  
FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT,  
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR  
FROM OTHER DEALINGS IN THE FONT SOFTWARE.  
Except as contained in this notice, the names of Gnome, the Gnome Foundation, and Bitstream  
Inc., shall not be used in advertising or otherwise to promote the sale, use or other dealings in  
this Font Software without prior written authorization from the Gnome Foundation or Bitstream  
Inc., respectively. For further information, contact: fonts at gnome dot org.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Arev Fonts Copyright  
------------------------------  
Copyright (c) 2006 by Tavmjong Bah. All Rights Reserved.  
Permission is hereby granted, free of charge, to any person obtaining a copy of the fonts  
accompanying this license (“Fonts”) and associated documentation files (the “Font Software”),  
to reproduce and distribute the modifications to the Bitstream Vera Font Software, including  
without limitation the rights to use, copy, merge, publish, distribute, and/or sell copies of the  
Font Software, and to permit persons to whom the Font Software is furnished to do so, subject  
to the following conditions:  
The above copyright and trademark notices and this permission notice shall be included in all  
copies of one or more of the Font Software typefaces.  
The Font Software may be modified, altered, or added to, and in particular the designs of  
glyphs or characters in the Fonts may be modified and additional glyphs or characters may be  
added to the Fonts, only if the fonts are renamed to names not containing either the words  
“Tavmjong Bah” or the word “Arev”.  
This License becomes null and void to the extent applicable to Fonts or Font Software that has  
been modified and is distributed under the “Tavmjong Bah Arev” names.  
The Font Software may be sold as part of a larger software package but no copy of one or more  
of the Font Software typefaces may be sold by itself.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK,  
OR OTHER RIGHT. IN NO EVENT SHALL TAVMJONG BAH BE LIABLE FOR ANY CLAIM, DAMAGES  
OR OTHER LIABILITY, INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,  
ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER  
DEALINGS IN THE FONT SOFTWARE.  
Except as contained in this notice, the name of Tavmjong Bah shall not be used in advertising or  
otherwise to promote the sale, use or other dealings in this Font Software without prior written  
authorization from Tavmjong Bah. For further information, contact: tavmjong @ free. fr.  
$Id: LICENSE 2133 2007-11-28 02:46:28Z lechimp $  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Icons  
Computer. . . . . . . . . . . . 06, A-10  
Connection . . . . . . . . . . . . . . . . 06  
Contrast . . . . . . . . . . . . . . . . . . . 15  
Contrast Setting. . . . . . . . . . . . 15  
Control with HDMI . . . . . . . . . 34  
. . . . . . . . . . . . . . . . . . . . . 10  
Numbers  
3DY/C . . . . . . . . . . . . . . . . . . . . . 22  
4:3 Aspect Setting. . . . . . . . . . 31  
1080 Auto Setting. . . . . . . . . . 31  
D
Digital camera . . . . . . . . . . . A-11  
Display . . . . . . . . . . . . . . . . . . . . 30  
DVI . . . . . . . . . . . . . . . . . . . . . . . . 06  
Dynamic Gamma. . . . . . . . . . . 21  
A
AMP Control . . . . . . . . . . . . . . . 35  
Aspect . . . . . . . . . . . . . . . . . . . . . 28  
ASPECT . . . . . . . . . . . . . . . . . . . . 10  
Auto Shut Off . . . . . . . . . . . . . . 27  
Auto Volume Control. . . . . . . 25  
E
F
Eco Mode . . . . . . . . . . . . . . . . . . 24  
Enhancer . . . . . . . . . . . . . . . . . . 16  
Enhancer Setting. . . . . . . . . . . 16  
EXIT . . . . . . . . . . . . . . . . . . . . . . . 12  
B
Backlight . . . . . . . . . . . . . . . . . . 16  
Backlight Setting. . . . . . . . . . . 17  
Balance . . . . . . . . . . . . . . . . . . . . 25  
Bass . . . . . . . . . . . . . . . . . . . . . . . 25  
Battery. . . . . . . . . . . . . . . . . . . . . 04  
Brightness . . . . . . . . . . . . . . . . . 15  
Front Panel Lock . . . . . . . . . . . 27  
G
Gamma . . . . . . . . . . . . . . . . . . . . 21  
C
H
Color . . . . . . . . . . . . . . . . . . . . . . 14  
Color Management . . . . . . . . 20  
Color Matrix. . . . . . . . . . . . . . . . 18  
Color Mngmt. Setting . . . . . . 20  
Color Space . . . . . . . . . . . . . . . . 18  
Color System. . . . . . . . . . . . . . . 17  
Color Temperature . . . . . . . . . 19  
Component. . . . . . . . . . . . . . . . 06  
Composite . . . . . . . . . . . . . . . . . 06  
HDMI . . . . . . . . . . . . . . . . . . . . . . 34  
HDMI CEC. . . . . . . . . . . . . . . . . . 11  
I
Input-1 Audio . . . . . . . . . . . . . . 35  
Input-3 Setting. . . . . . . . . . . . . 31  
Input Label . . . . . . . . . . . . . . . . 31  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L
R
S
T
LINK . . . . . . . . . . . . . . . . . . . . . . . 11  
Lip Sync . . . . . . . . . . . . . . . . . . . 25  
Remote control unit. . . . . . . . 10  
Remote sensor . . . . . . . . . . . . . 09  
Reset . . . . . . . . . . . . . . . 26, 33, 35  
RS-232C . . . . . . . . . . . . . . . . . . . 40  
M
Main unit . . . . . . . . . . . . . . . . . . 09  
MENU . . . . . . . . . . . . . . . . . . . . . 12  
Menu Language . . . . . . . . . . . 27  
MUTING . . . . . . . . . . . . . . . . . . . 10  
Setup . . . . . . . . . . . . . . . . . . . . . . 27  
Sharpness . . . . . . . . . . . . . . . . . 16  
Sound . . . . . . . . . . . . . . . . . . . . . 25  
Speaker unit . . . . . . . . . . . . . . . 05  
N
Natural Cinema . . . . . . . . . . . . 23  
Noise Reduction . . . . . . . . . . . 22  
Tint. . . . . . . . . . . . . . . . . . . . . . . . 14  
Tint Setting . . . . . . . . . . . . . . . . 14  
Treble . . . . . . . . . . . . . . . . . . . . . 25  
Turn On Volume . . . . . . . . . . . 26  
O
One Touch Play . . . . . . . . . . . . 34  
OPTION. . . . . . . . . . . . . . . . . . . . 10  
Other . . . . . . . . . . . . . . . . . . . . . . 24  
V
P
Video game. . . . . . . . . . . . . . . A-5  
VOL +/–. . . . . . . . . . . . . . . . . . . . 10  
Volume Limit . . . . . . . . . . . . . . 26  
PC Monitor Mode . . . . . . . . . . 23  
PC Setting . . . . . . . . . . . . . . . . . 32  
PEQ. . . . . . . . . . . . . . . . . . . . . . . . 26  
Picture. . . . . . . . . . . . . . . . .A-2, 13  
Picture Delay Time . . . . . . . . . 23  
Position Adjustment . . . . . . . 30  
POWER . . . . . . . . . . . . . . . . . . . . 10  
Power cable. . . . . . . . . . . . . . . . 08  
Power indicator . . . . . . . . . . . . 09  
Power Indicator . . . . . . . . . . . . 30  
Power Off Link . . . . . . . . . . . . . 34  
W
White Balance Setting . . . . . . 19  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
U.S.A.  
Canada  
TOLL FREE: 1 (800) 252-5722  
TOLL FREE: 1 (800) 964-2650  
Remember to retain your Bill of Sales for Warranty Service.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USA ONLY  
LIMITED WARRANTY  
2-2  
ONLY FOR PRODUCT PURCHASED IN U.S.A.  
2 YRS  
2 YRS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND  
IN THE COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Please do not return your product to the retailer  
Instead, return your product to the JVC authorized service center nearest you. If shipping the product to the service  
center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of  
the problem(s). Please call 1-800-252-5722 to locate the nearest JVC authorized service center. Service locations  
representative will require clear access to the product.  
WHAT IS NOT COVERED:  
JVC AMERICAS CORP.  
For customer use:  
BT-51029-4H  
(0807)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2009 Victor Company of Japan, Limited  
1009HHH-MW-MT  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware PCM 9387 User Manual
iSimple Furnace PGHGM5 User Manual
JVC Speaker System UX G3 User Manual
JVC Stereo System CA MXS5RMD User Manual
Kalorik Coffeemaker USK CM 23826 User Manual
Kenwood Car Amplifier KA 892 User Manual
Kompernass Blood Pressure Monitor KH 8099 User Manual
Kompernass Juicer KH25 07 08 V1 User Manual
Konica Minolta All in One Printer 223 User Manual
Konica Minolta Network Card PageScope User Manual