JVC Computer Monitor LCT2142 001A H User Manual

COLOUR VIDEO MONITOR  
BEDIENUNGSANLEITUNG  
MANUEL D’INSTRUCTIONS  
ISTRUZIONI  
: FARB-VIDEO-MONITOR  
: MONITEUR VIDÉO COULEUR  
: MONITOR VIDEO A COLORI  
MANUAL DE INSTRUCCIONES : MONITOR DE VIDEO A COLOR  
INSTRUCTIONS  
TM-A140E  
+
B
A
ON  
OFF  
INPUT SELECT  
PHASE  
CHROMA  
BRIGHT  
CONTRAST  
MENU  
VOLUME/SELECT  
POWER  
TM-A140E  
LCT2142-001A-H  
Download from Www.Somanuals.com. All Manuals Search And Download.  
POWER CONNECTION  
WARNING  
Do not cut off the main plug from this equipment.  
If the plug fitted is not suitable for the power points in your  
home or the cable is too short to reach a power point, then  
obtain an appropriate safety approved extension lead or  
adapter or consult your dealer.  
The wire which is coloured green-and-yellow must be connected  
to the terminal which is marked with the letter E or the safety  
earth symbol  
or coloured green or green-and-yellow.  
The wire which is coloured blue must be connected to the  
terminal which is marked with the letter N or coloured black.  
If nonetheless the mains plug is cut off, remove the fuse and  
dispose of the plug immediately, to avoid a possible shock  
hazard by inadvertent connection to the main supply.  
The wire which is coloured brown must be connected to the  
terminal which is marked with the letter L or coloured red.  
If a new main plug has to be fitted, then follow the instruction  
given below:  
When replacing the fuse, be sure to use only a correctly rated  
approved type, re-fit the fuse cover.  
WARNING:  
THIS APPARATUS MUST BE EARTHED.  
IF IN DOUBT —— CONSULT A COMPETENT  
ELECTRICIAN.  
IMPORTANT  
How To Replace The Fuse  
The wires in the mains lead on this product are coloured in  
accordance with the following cord:  
Green-and-yellow : Earth  
Open the fuse compartment with the blade screwdriver, and  
replace the fuse.  
Blue  
Brown  
: Neutral  
: Live  
As these colours may not correspond with the coloured  
making identifying the terminals in your plug, proceed as  
follows:  
Fuse  
CONTENTS  
SAFETY PRECAUTIONS............................................................................................2  
CONTROLS AND FEATURES....................................................................................4  
HOW TO HANDLE BASIC OPERATIONS .................................................................6  
HOW TO USE THE MENU FUNCTIONS....................................................................7  
HOW TO INITIALIZE THE SETTING ........................................................................10  
BASIC CONNECTION EXAMPLE ............................................................................11  
TROUBLESHOOTING ..............................................................................................12  
SPECIFICATIONS.....................................................................................................13  
Dear Customer,  
This apparatus is in conformance with the valid European  
directives and standards regarding electromagnetic  
compatibility and electrical safety.  
This manual is divided into five language sections:  
English, German, French, Italian and Spanish.  
European representative of Victor Company of Japan  
Limited is:  
JVC Technology Centre Europe GmbH  
English ...............................................................Page 2 to 15  
German ............................................................Page 16 to 29  
Postfach 10 05 52  
French..............................................................Page 30 to 43  
61145 Friedberg  
Italian................................................................Page 44 to 57  
Germany  
Spanish ............................................................Page 58 to 71  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS AND FEATURES  
FRONT VIEW  
<Front Panel>  
+
B
A
ON  
OFF  
INPUT SELECT  
PHASE  
CHROMA  
BRIGHT  
CONTRAST  
MENU  
VOLUME/SELECT  
POWER  
TM-A140E  
+
B
A
ON  
OFF  
INPUT SELECT  
P
H
A
S
E
C
H
R
O
M
A
B
R
I
G
H
T
C
O
N
T
R
A
S
T
M
E
N
U
VOLUME/SELECT  
P
O
W
E
R
TM-A140E  
1 Phase button [PHASE  
]
8 Input A button [INPUT SELECT A]  
Press this button to set the picture hue adjustment mode.  
Adjust the value with the VOLUME/SELECT buttons. Also  
used as a control button in the menu function mode.  
Selects the video signal input to the VIDEO A terminal  
(BNC connector) and the audio signal input to the AUDIO  
A terminal (RCA connector) on the rear panel. When  
selected, the input A indicator w lights.  
2 Chroma button [CHROMA  
]
Press this button to set the picture colour density  
adjustment mode. Adjust the value with the VOLUME/  
SELECT buttons. Also used as a control button in the  
menu function mode.  
9 Power indicator  
Lights in green when the power is ON.  
Lit  
: When the power is on.  
: When the power is off.  
Unlit  
3 Brightness button [BRIGHT  
]
p Power switch [POWER  
]
Press this button to adjust picture brightness. Adjust the  
value with the VOLUME/SELECT buttons. Also used as a  
control button in the menu function mode.  
Press this switch to turn the power on or off.  
_ON  
: Power is turned on.  
: Power is turned off.  
OFF  
4 Contrast button [CONTRAST  
]
q Input B indicator  
Press this button to adjust picture contrast. Adjust the  
value with the VOLUME/SELECT buttons. Also used as a  
control button in the menu function mode.  
Lights in green when the Input B is selected.  
w Input A indicator  
Lights in green when the Input A is selected.  
5 Menu button [MENU]  
Displays and disappears the <MENU> screen.  
Pressing the PHASE button with the Menu button  
depressed will display the <SET-UP MENU> screen.  
e Built-in speaker  
The speaker is located inside.  
6 Volume/Select buttons  
[VOLUME/SELECT –  
+]  
Adjusts the speaker volume. Also used as a control button  
in the menu function mode.  
7 Input B button [INPUT SELECT B]  
Selects the video signal input to the VIDEO B terminal  
and the audio signal input to the AUDIO B terminal (RCA  
connector) on the rear panel. When selected, the input B  
indicator q lights.  
Note:  
* The VIDEO B terminals include a video terminal (BNC  
connector) and a Y/C terminal (mini-DIN 4-pin connector).  
The Y/C (S-video) terminal is given priority.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
REAR VIEW  
<Rear Panel>  
VIDEO  
AUDIO  
A
B
A
B
IN  
IN  
Y/C IN  
IN  
OUT  
OUT  
OUT  
VIDEO  
AUDIO  
A
B
A
B
IN  
IN  
Y/C IN  
IN  
OUT  
OUT  
OUT  
For United Kingdom  
To AC outlet  
(230 V AC, 50 Hz/60 Hz)  
For European countries  
r Video A terminals [VIDEO A IN/OUT]  
y Audio A terminals [AUDIO A IN/OUT]  
Input (IN) and output (OUT) terminals for the audio signals  
corresponding to the VIDEO A terminals r. The output  
terminal is bridge-connected.  
Video signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
IN  
: Video signal input terminal  
OUT : Bridge-connected video signal output terminal  
IN  
: Audio signal input terminal  
OUT : Bridge-connected audio signal output terminal  
Notes:  
Notes:  
* For corresponding audio signals, use the AUDIO A  
terminals y.  
* For corresponding video signals, use the VIDEO A  
* Also refer to the BASIC CONNECTION EXAMPLE on  
page 11.  
terminals r.  
* Also refer to the BASIC CONNECTION EXAMPLE on  
page 11.  
t Video B terminals [VIDEO B IN/OUT]  
[ BNC connector ]  
u Audio B terminals [AUDIO B IN/OUT]  
Input (IN) and output (OUT) terminals for the audio signals  
corresponding to the VIDEO B terminals t. The output  
terminal is bridge-connected.  
Video signal input (IN) and output (OUT) terminals.  
The output terminal is bridge-connected.  
IN  
: Video signal input terminal  
OUT : Bridge-connected video signal output terminal  
IN  
: Audio signal input terminal  
OUT : Bridge-connected audio signal output terminal  
[ Y/C connector ]  
Notes:  
Y/C (S-Video) signal input (mini-DIN 4-pin connector)  
terminal.  
Y/C IN : Y/C signal input terminal.  
* For corresponding video signals, use the VIDEO B  
terminals t.  
* Also refer to the BASIC CONNECTION EXAMPLE on  
page 11.  
Notes:  
* For corresponding audio signals, use the AUDIO B  
terminals u.  
i AC Inlet [AC IN]  
* There is no Y/C (S-video) signal output terminal.  
* When both VIDEO B terminals are connected (input) at  
the same time, the Y/C terminal is given priority.  
* Also refer to the BASIC CONNECTION EXAMPLE on  
page 11.  
Power input connector. Connect the provided AC power  
cord o to an AC outlet (230 V AC, 50 Hz/60 Hz).  
o Power cord  
Connects the provided power cord (230 V AC, 50 Hz/60 Hz)  
to the AC IN connector.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO HANDLE BASIC  
OPERATIONS  
BASIC OPERATION  
1. Press the POWER switch to turn on the power.  
Colour system indication  
(PAL or NTSC)  
PAL  
_ON : Power turns ON. (Power indicator: lit)  
OFF : Power turns OFF. (Power indicator: unlit)  
ON  
OFF  
POWER  
2. Press the INPUT SELECT button to choose input.  
Selects video/audio signals input to terminals on the rear  
panel.  
B
A
With regard to Colour system indication  
With the COLOR SYSTEM setting  
set to AUTO mode, when you turn on  
the power or select inputs, the colour  
system indication appears for about 3  
seconds on the screen while PAL or  
NTSC signals are being detected.  
It does not appear when receiving  
B/W signal or when no signal is input.  
See page 7 for COLOR SYSTEM  
setting.  
INPUT  
SELECT  
Terminals on the rear panel  
INPUT SELECT  
Video signal input  
VIDEO A terminal  
VIDEO B terminal  
Audio signal input  
AUDIO A terminal  
AUDIO B terminal  
button  
1 Input A  
2 Input B  
3. Press the VOLUME/SELECT buttons to adjust the  
speaker volume.  
00 ~ 50  
Press this button to display the speaker volume level on the  
screen.  
+
+ : The Built-in speaker volume is increased. (00 = 50)  
– : The Built-in speaker volume is decreased. (50 = 00)  
* Screen indication will disappear about 10 seconds after  
operating.  
VOLUME/SELECT  
VOLUME  
:
20  
+
PICTURE ADJUSTMENT  
–20 ~ +20  
1. Press select button corresponding to the item you  
want to adjust.  
The item you select is displayed on the screen.  
1 PHASE (  
2 CHROMA ( ) : Chroma control  
3 BRIGHT ( ) : Brightness control  
4 CONTRAST ( ) : Contrast control  
) : Phase control  
PHASE  
CHROMA  
BRIGHT  
CONTRAST  
PHASE  
:
00  
2. Adjust with the VOLUME/SELECT buttons.  
+
+
VOLUME/SELECT button  
Items  
Notes:  
+
Phase control is effective only in the  
NTSC colour system mode.  
Chroma control is not effective when  
receiving B/W or when no signal is  
input.  
When the Chroma control is set  
to level “–20”, the picture turns  
monochrome.  
PHASE  
(Phase)  
VOLUME/SELECT  
reddish  
greenish  
CHROMA  
(Chroma)  
lighter  
darker  
lower  
deeper  
brighter  
higher  
BRIGHT  
(Brightness)  
“NO EFFECT” is displayed (For  
about 3 seconds) when your selected  
function has no effect.  
CONTRAST  
(Contrast)  
* Screen indication will disappear about 10 seconds  
after operating.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MENU FUNCTIONS  
DISPLAY AND SELECTION IN THE <MENU> SCREEN  
MODE (SETTING)  
You can set the following menu items.  
Set them depending on your needs.  
<MENU> screen  
1
2
<MENU >  
SHARPNESS  
COLOR SYSTEM  
• SHARPNESS  
• COLOR SYSTEM  
:
00  
: AUTO  
3
4
1. Press the MENU button.  
The <MENU> screen is displayed.  
EXIT  
MENU  
2. Press the PHASE (  
select MENU items.  
) or CHROMA ( ) button to  
+
A selection mark (3) is put next to the selected item.  
PHASE  
CHROMA  
BRIGHT  
CONTRAST  
MENU  
VOLUME/SELECT  
<Front panel button>  
Front panel  
button  
Function  
displayed  
Contents  
1 Selection mark (3): Indicates the  
menu item you select.  
2 Menu item: Menu items you can  
select.  
PHASE  
SHARPNESS  
COLOR SYSTEM  
CHROMA  
PHASE (  
)
5
Advance selection mark (3).  
Reverse selection mark (2).  
CHROMA (  
)
3 Setting display: Indicates the  
current settings (value).  
4 Function display: The functions of  
the front panel buttons (7 buttons on  
the left) correspond to the function  
displayed.  
3. Press the VOLUME/SELECT buttons to set.  
+
Front panel  
button  
Function  
displayed  
Contents  
Function  
Contents  
displayed  
+
3
Increase (to max. value).  
Advance the setting value.  
Decrease (to min. value).  
Reverse the setting value.  
VOLUME/  
SELECT (+)  
VOLUME/SELECT  
5
Advance the menu item.  
Reverse the menu item.  
VOLUME/  
SELECT (–)  
Lower the adjustment  
value (to the minimum).  
+
2
Raise the adjustment  
value (to the maximum).  
Menu items  
Purpose  
Setting range  
3
2
Advance the setting value.  
Reverse the setting value.  
00  
+1  
+2  
+3  
+4  
+5  
SHARPNESS  
Picture sharpness  
Exits the <MENU>  
screen.  
AUTO  
NTSC  
PAL  
EXIT  
COLOR SYSTEM  
Colour system  
* Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good,  
set it to the exclusive mode (NTSC or PAL) corresponding to the received colour system.  
4. If you want to set the other menu items, repeat  
procedures 2 and 3.  
5. Press the MENU button to quit.  
Front panel  
button  
Function  
displayed  
Contents  
Quit (or Release) the  
<MENU> screen.  
MENU  
MENU  
EXIT  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO USE THE MENU  
FUNCTIONS (cont’d)  
DISPLAY AND SELECTIONS IN THE <SET-UP MENU>  
MODE (SETTING)  
<SET-UP MENU> screen  
You can set the following set-up menu items.  
1
<SET–UP MENU>  
H. POSITION  
WHITE BALANCE  
CONTROL LOCK  
H. POSITION  
WHITE BALANCE  
CONTROL LOCK  
:
00  
: OFF  
Note:  
3
4
2
Parameters for H. POSITION can be set separately depending on the video input (Input  
A or Input B) selected by the input select buttons on the front panel.  
Select the required video input with the input select buttons on the front panel in  
advance.  
EXIT  
1. While pressing the MENU button, press the  
PHASE (  
) button.  
+
The <SET-UP MENU> screen is displayed.  
PHASE  
CHROMA  
BRIGHT  
CONTRAST  
MENU  
VOLUME/SELECT  
<Front panel button>  
MENU  
PHASE  
1 Selection mark (3): Indicates the  
menu item you select.  
2 Menu item: Menu items you can  
select.  
3 Setting display: Indicates the  
current settings (value).  
2. Press the PHASE (  
) or CHROMA ( ) button to  
select the desired menu item.  
4 Function display: The functions of  
the front panel buttons (7 buttons on  
the left) correspond to the function  
displayed.  
A selection mark (3) is put next to the selected item.  
Front panel  
button  
Function  
displayed  
Contents  
PHASE  
CHROMA  
5
PHASE (  
)
Advance selection mark (3).  
Reverse selection mark (2).  
Function  
Contents  
displayed  
CHROMA (  
)
H. POSITION  
5
Advance the menu item.  
Reverse the menu item.  
WHITE BALANCE  
CONTROL LOCK  
Lower the adjustment  
value (to the minimum).  
+
Raise the adjustment  
value (to the maximum).  
3. Press the VOLUME/SELECT buttons to set.  
3
2
Advance the setting value.  
Reverse the setting value.  
+
Front panel  
button  
Function  
displayed  
Contents  
Exit the <SET-UP  
MENU> screen (release).  
+
Increase (to max. value).  
Advance the setting value.  
EXIT  
DRV  
CUTO  
R
VOLUME/SELECT  
VOLUME/  
3
Selects DRV adjustment.  
SELECT (+)  
Selects CUT OFF setting  
screen.  
Selects CUT OFF  
adjustment.  
CUTO  
Adjusts red signal level.  
Decrease (to min. value).  
Reverse the setting value.  
Adjusts green signal  
level.  
VOLUME/  
2
G
SELECT (–)  
Selects DRIVE setting  
screen.  
B
Adjusts blue signal level.  
DRV  
Turns the ON-SCREEN  
display on or off. (This  
function is effective only  
in the DRIVE or CUT OFF  
adjustment mode.)  
Notes:  
DISP  
For the WHITE BALANCE setting, select the CUT  
OFF or DRIVE setting screen, then select the buttons  
(PHASE/CHROMA/BRIGHT) corresponding to the function  
indicated (R/G/B).  
To return to the <SET-UP MENU> screen, press the EXIT  
(MENU) button.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set-up menu items  
Purpose  
Settings  
H. POSITION  
Adjusts the horizontal position of the  
screen (+ : Horizontal position shifts  
to the right/–: Horizontal position  
shifts to the left).  
–05 –04 01 00 +01 +04 +05  
WHITE BALANCE  
Adjusts the white balance.  
Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.  
Screen setting is changed to the selected setting mode.  
Select R/G/B buttons corresponding to the function display  
to adjust.  
DRIVE  
R.DRIVE  
B.DRIVE  
Adjusts red level.  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
–09 –08 ••• •• 01 00 +01 ••• •• +08 +09  
Adjusts blue level.  
Adjusts red cut off.  
Adjusts green cut off.  
Adjusts blue cut off.  
CUT OFF R. CUT OFF  
G. CUT OFF  
B. CUT OFF  
CONTROL LOCK  
Sets the operation buttons on the  
front panel to control lock mode.  
OFF  
ON  
4. To set the other set-up menu items, repeat the  
procedures 2 and 3.  
Notes:  
When the CONTROL LOCK function  
is set to ON, pressing operation  
buttons on the front panel will display  
the message “CONTROL LOCK ON!”  
on the screen for about 3 seconds.  
The CONTROL LOCK function is  
maintained even when the power is  
turned off.  
5. Press the MENU button to quit.  
Front panel  
button  
Function  
displayed  
Contents  
To turn off the CONTROL LOCK  
function, while holding the MENU  
button press the PHASE button. Then  
set the CONTROL LOCK function to  
OFF.  
Quit (or Release) the  
<MENU> screen.  
MENU  
MENU  
EXIT  
Even when the CONTROL LOCK  
function is set to ON, the following  
operations are available:  
– Power Switch operation.  
– Sound volume adjustment with the  
VOLUME/SELECT buttons.  
– Display or disappear of the  
<SET-UP MENU> screen.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
HOW TO INITIALIZE THE SETTING  
SCREEN DISPLAY AND SELECTIONS IN THE  
<SET-UP MENU> RESET MODE  
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and  
the volume level to their factory-set (initial) values.  
<SET-UP MENU> RESET screen  
<SET–UP MENU> RESET  
Are you sure ?  
1. Press the POWER (  
) switch to turn the power  
Yes”  
“No”  
then <CONTRAST>  
then <+> or <–>  
OFF ( ).  
ON  
OFF  
POWER  
Initial settings  
2. While pressing both MENU button and PHASE (  
)
Initialization  
(setting)  
button, press the POWER ( ) switch to turn the power  
ON (_).  
Functions (Items)  
The <SET-UP MENU> RESET screen is displayed.  
SHARPNESS  
COLOR SYSTEM AUTO  
00  
ON  
OFF  
Note:  
The <SET-UP MENU> RESET screen will not be  
POWER  
PHASE  
MENU  
displayed if the MENU or PHASE buttons are pressed  
for a very short time. Keep pressing them until the  
display screen appears.  
H. POSITION  
00  
WHITE BALANCE  
R. CUT OFF 00  
G. CUT OFF 00  
B. CUT OFF 00  
3. Press the CONTRAST (  
) button.  
Initialization starts.  
* The <SET-UP MENU> RESET screen disappears  
automatically after finishing initialization.  
R. DRIVE  
B. DRIVE  
00  
00  
CONTROL LOCK OFF  
CONTRAST  
Note:  
To cancel initialization.  
PHASE  
00  
00  
00  
00  
Press the VOLUME/SELECT [+] or [–] buttons.  
* The <SET-UP MENU> RESET screen disappears after  
cancelling initialization.  
CHROMA  
CONTRAST  
BRIGHT  
VOLUME  
20  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC CONNECTION EXAMPLE  
Notes:  
Before connecting your system, make sure that all units are turned off.  
The illustration below shows some examples of different connections. Terminal connections may differ depending on the  
component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.  
Each pair of input (IN) and output (OUT) terminals are bridge-connected. However, the Y/C input terminal (Y/C IN) has no output  
terminal (OUT) corresponding to it.  
If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the  
bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).  
When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video  
components.  
(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused  
by the same video signal “looping” between the VCRs, and is not a malfunction.)  
Select the video input (Input A or Input B) with the input select button on the front panel.  
7 VIDEO A Connection Example  
7 VIDEO B Connection Example  
(Select Input A button)  
(Select Input B button)  
Video Camera  
Video Monitor  
VCR  
Video Camera  
Video Monitor  
VCR  
Audio  
Audio  
Video  
Video  
Y/C (S-video)  
(Audio signal cable)  
(Audio signal cable)  
(Video signal cable)  
(Video signal cable)  
(Y/C (S-video) signal cable)  
VIDEO  
AUDIO  
B
VIDEO  
AUDIO  
A
A
B
A
A
B
B
IN  
IN  
IN  
IN  
Y/C IN  
Y/C IN  
IN  
IN  
OUT  
OUT  
OUT  
OUT  
OUT  
OUT  
Audio  
Video  
Audio  
Video  
(Audio signal cable)  
(Video signal cable)  
(Audio signal cable)  
(Video signal cable)  
Video Monitor  
VCR  
Video Monitor  
VCR  
: Signal Flow  
: Signal Flow  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Solutions to common problems related to your monitor are described here. If none of the solutions presented here  
solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance.  
Problems  
Points to be checked  
Measures (Remedy)  
Firmly insert the power plug.  
No power supply.  
Is the power plug loosened or disconnected?  
No picture with the  
power on.  
Is the video signal output from the connected  
component?  
Set the connected component correctly.  
Is the input signal selected properly?  
Select the required video signal input with the  
Input select button. (See page 6.)  
Is the video cable disconnected?  
Connect the video signal cable firmly.  
(See page 11.)  
No sound.  
Is the audio signal output from the connected  
component?  
Set the connected component correctly.  
Is the volume output set to minimum?  
Adjust the speaker volume with the  
VOLUME/SELECT buttons. (See page 6.)  
Is the audio cable disconnected?  
Connect the audio signal cable firmly.  
(See page 11.)  
Shaking picture.  
Is the monitor close to a device generating a  
strong magnetic field?  
Move the device away from the monitor until the  
picture stabilizes.  
No colours, wrong  
colour, or dark picture.  
Is the colour system selected properly?  
Set the COLOR SYSTEM in the <MENU>  
screen mode to [AUTO] mode. (See page 7.)  
Has the picture control setting (CONTRAST,  
Set each picture control to the standard setting.  
BRIGHT, CHROMA or PHASE) been changed? (See page 6.)  
Unnatural, irregularly  
coloured, or distorted  
picture.  
Is the monitor close to a speaker, magnet or any Move the device away from the monitor and turn  
other device generating a strong magnetic field? the monitor’s power off. Wait at least 30 minutes,  
then turn the power on again.  
Front panel button does Are the operation buttons on the front panel  
Set the CONTROL LOCK to OFF in the  
<SET-UP MENU> screen mode. (See pages 8  
and 9.)  
not function.  
locked? ( Has CONTROL LOCK function set to  
ON?)  
The following are not malfunctions:  
When a bright still image (such as a white cloth) is displayed for a long period, it may appear to be coloured. This is due to the  
structure of the cathode ray tube and will be deleted when another image is displayed.  
You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static  
electricity on the CRT and is not harmful.  
The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality  
appears on the screen as well.  
If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to  
mutual interference; it is not a malfunction.  
Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being  
used.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
MODEL  
TM-A140E  
Type  
Colour video monitor  
PAL, NTSC (3.58)  
Colour system  
Picture tube  
36 cm measured diagonally,  
90° deflection, in-line gun,  
vertical line trio type  
(phosphor stripe pitch 0.64 mm)  
Effective screen size  
Width  
Height  
280.8 mm  
210.6 mm  
Diagonal 335.4 mm  
Scanning frequency  
Horizontal resolution  
H : 15.734 kHz (NTSC), 15.625 kHz (PAL)  
V : 59.94 Hz (NTSC), 50 Hz (PAL)  
320 TV lines or more  
(Y/C input mode)  
Input terminals  
VIDEO A  
VIDEO B  
Composite video: 1 line, BNC connector x 2,  
1 Vp-p, 75 negative sync  
(bridge connection possible, auto termination)  
Composite video: 1 line, BNC connector x 2,  
1 Vp-p, 75 negative sync  
(bridge connection possible, auto termination)  
Y/C-separated: 1 line, mini-DIN 4-pin connector x 1  
Y: 1.0 Vp-p, 75 Ω  
C: 0.286 Vp-p, 75 (NTSC), 0.3 Vp-p, 75 (PAL)  
AUDIO A  
AUDIO B  
1 line (monaural), RCA pin x 2, 0.5 V rms, high-impedance  
(bridge connection possible)  
1 line (monaural), RCA pin x 2, 0.5 V rms, high-impedance  
(bridge connection possible)  
Audio power output  
1 W (monaural)  
Built-in speaker  
8 cm round x 1, impedance of 8 Ω  
Environmental conditions  
Operation temperature: 0 °C – 40 °C  
Operation humidity: 20% – 80% (non-condensing)  
Power requirements  
Power consumption  
Dimensions  
230 V AC, 50 Hz/ 60 Hz  
0.55 A (230 V AC)  
Width  
Height  
Depth  
346 mm  
310 mm  
368.5 mm  
Weight  
12.2 kg  
Accessory  
AC power cord (2 m) x 1 (for United Kingdom)  
AC power cord (2 m) x 1 (for European countries)  
* Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly.  
* Dimensions and weight are approximate.  
* E. & O. E. Design and specifications subject to change without notice.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Dimensions  
Unit : mm  
< Side View >  
< Front View >  
368.5  
363.5  
346  
1.5  
*
*
287  
+
B
A
ON  
OFF  
INPUT SELECT  
PHASE  
CHROMA  
BRIGHT  
CONTRAST  
MENU  
VOLUME/SELECT  
POWER  
TM-A140E  
284  
63.7  
273  
* Asterisks ( ) are used to indicate front panel  
dimensions.  
7 Y/C (Mini DIN 4 pin) terminal specification  
Y/C IN  
Pin No.  
Signal  
GND (Y)  
GND (C)  
Y
4
3
1
2
3
4
1
2
C
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
0606STH-MW-MT  
2006 Victor Company of Japan, Limited  
©
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Clothes Dryer IS60VU User Manual
JBL DJ Equipment CSA 2120 User Manual
Jenn Air Appliance Trim Kit W10295557D User Manual
Kawai Electronic Keyboard CA63 User Manual
Kenmore DVR 79099613 User Manual
Kenwood CD Player CD 324M User Manual
Kenwood Stereo Receiver KRF V7300D User Manual
KitchenAid Oven KEBC247KBL04 User Manual
KitchenAid Ventilation Hood 9763382 User Manual
Konica Minolta Camera Accessories T 10A T 10MA T 10WSA T 10WLA User Manual