PLASMA DISPLAY MONITOR
BEDIENUNGSANLEITUNG : PLASMABILDSCHIRM
MANUEL D'INSTRUCTIONS : MONITEUR DE VISUALISATION PLASMA
MANUALE D'ISTRUZIONI : MONITOR CON SCHERMO AL PLASMA
MANUAL DE INSTRUCCIONES : MONITOR DISPLAY DE PLASMA
INSTRUCTIONS
GM-V42E
MENU INPUT
POWER
LCT1390-001B
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS
Model
Thank you for purchasing this JVC Monitor.
Before using the monitor, read this manual carefully so
that you know how to use the Monitor correctly.
Refer to this manual whenever questions or problems
about operation arise. Be sure to read and observe the
safety precautions.
GM-V42E
Keep this manual where the user can see it easily.
* Installation and removal require special expertise.
Consult your product dealer for details.
This instruction manual refers to the GM-V42PCE, GM-V42PCEG, GM-V42PCEB and GM-V42E.
The explanations and illustrations used in this instruction manual are of the GM-V42E unless otherwise stated.
The differences between each model are as follows:
GM-V42E
Available
Available
Available
GM-V42PCE/GM-V42PCEG/GM-42PCEB
Not available*1
Inputs VIDEO A
VIDEO B
Not available*1
COMPONENT/RGB B
Not available*1
1
* These inputs will be available with the separately-purchased video input unit (IF-C42P1G).
Ask your dealer to install the video input unit.
Contents
Page
Page
Safety Precautions .................................................... 2
Parts Identification .................................................... 4
• Remote Control ................................................... 4
• Monitor: Front View ............................................. 5
• Monitor: Rear Views ............................................ 6
Other Convenient Functions ................................... 24
• Showing On-screen Display .............................. 24
• Confirming the Use Time and Model Name ...... 25
• Showing the On-screen When Changing
the Input Mode .................................................. 25
• Prohibiting the Monitor’s Button Operations...... 26
• Setting the Remote-Controllable Input .............. 27
• Setting the High-Definition Signal Types ........... 27
• Setting the Clock and the Power On/Off
Timer ................................................................. 28
• Using the Pixel Shift Function ........................... 29
• Using the Power Save Function ........................ 29
• Preventing the Afterimage Effect ...................... 30
• Refreshing the Screen ...................................... 31
• Checking the Timer Battery............................... 32
• Resetting All the Setup Menu Settings ............. 33
• Resetting All the Menu Settings ........................ 33
Preparations.............................................................. 8
• Checking the Accessories................................... 8
• Installing the Batteries......................................... 8
• Attaching the Ferrite Core ................................... 8
Installation ................................................................. 9
• Precautions ......................................................... 9
Connections ............................................................ 10
• Precautions ....................................................... 10
• Available Signals ............................................... 10
• Connection Diagrams ....................................... 11
Basic Operations..................................................... 14
• Daily Operations ............................................... 14
• Changing the Aspect Ratio ............................... 15
Menu Classifications ............................................... 34
• Main Menu ........................................................ 34
• Setup Menu....................................................... 36
Video Adjustments .................................................. 16
• Adjusting the Picture Quality ............................. 16
• Adjusting the Screen Size and Position ............ 17
• Adjusting the Color Temperature....................... 19
• Adjusting the White Balance ............................. 19
• Changing the Aspect Ratio ............................... 21
• Setting the Receivable Signal Types ................. 21
• Setting the COMPONENT/RGB B Input ........... 22
• Changing the Resistance of the RGB B Input
Terminals........................................................... 23
Troubleshooting ....................................................... 38
• Self-diagnostic Indication .................................. 39
Specifications .......................................................... 40
•
Resetting the Function Selection Menu Settings.. 23
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
EUROPE EMC STANDARD NOTICE
I GM-V42E
Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the
user may be required to take adequate measure.
IMPORTANT INFORMATION
WARNING:TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for
its installation, use and service. Please read these “Important Safeguards” carefully before use.
– All the safety and operating instructions should be read before the product is operated.
– The safety and operating instructions should be retained for future reference.
– All warnings on the product and in the operating instructions should be adhered to.
– All operating instructions should be followed.
– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
– Use a vacuum cleaner to get rid of the dust around the intakes (all the
openings) on the rear. If a vacuum is not available, use a cloth and wipe it off.
Failure to do so will cause internal heat buildup and, therefore, cause damage
to the product.
– Do not use attachments not recommended by the product manufacturer as they
may be hazardous.
– Do not use this product near water. Do not use immediately after moving from a
low temperature to high temperature, as this causes condensation, which may
result in fire, electric shock, or other hazards.
– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or
adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions,
and should use a mount recommended by the manufacturer.
– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and
uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing
possible injury to the operator.
– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the
product and protect it from overheating. These openings must not be blocked or covered. (The openings
should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have
been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance
more than 10 cm.
– This product should be operated only with the type of power source indicated on the label. If you are not sure of the
type of power supply to your home, consult your product dealer or local power company.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
– For United Kingdom: This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet.
If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the
safety purpose of the grounded plug.
– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them.Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
– For added protection of this product during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the product due to
lightning and power line surges.
– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a
risk of fire or electric shock.
– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short
out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages
and other hazards. Refer all service to qualified service personnel.
– Unplug this product from the wall outlet and refer service to qualified service personnel under the following conditions:
a)When the power supply cord or plug is damaged.
b)If liquid has been spilled, or objects have fallen on the product.
c) If the product has been exposed to rain or water.
d)If the product operated normally by following the operating instructions. Adjust only those controls that are covered
by the Operation Manual, as an improper adjustment of controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
e)If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance – this indicates a need for service.
– When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
– The product should be placed more than 30 cm away from heat sources such as radiators, heat registers, stoves, and
other products (including amplifiers) that produce heat.
– When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product
for protection against electric shock.
– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that
present special hazards when over heated.
– Use only the accessory cord designed for this product to prevent shock.
– Do not touch the handles on the rear soon after many hours of continuous use.They are so hot and will cause a burn on
the hand. If you need to touch the handles, for example, to move the product, wait until the handles are cooled enough.
–
Option terminal: This terminal is intended exclusively to be used to drive the fan motor.
Do not connect any plugs to the terminal other than JVC’s recommended optional parts.
Polarity of terminal
POWER CONNECTION
The power supply voltage rating of this product is AC 220 – 240 V.
The power cords attached conform to the following power supply
voltage and countries. Use only the power cord designated to ensure
Safety and EMC regulations of each country.
For European countries:
AC 220 – 240 V
For United Kingdom:
AC 220 – 240 V
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse.
When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover. (Consult your dealer or qualified
service personnel.)
For Australia:
AC 220 – 240 V
How to replace the fuse
Open the fuse
compartment with the
blade screw driver, and
replace the fuse.
Fuse
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
Remote Control
1
2
RM–C579 REMOTE CONTROL UNIT
RM–C579 REMOTE CONTROL UNIT
OFF
POWER
ON
3
4
OFF
POWER
ON
DISPLAY
ASPECT
DISPLAY
ASPECT
INPUT SELECT
9
p
COMPO.
A
/(RGB B)
VIDEO
B
INPUT SELECT
RGB A
COMPO.
MUTING
VOLUME
A
/(RGB B)
5
6
VIDEO
B
RGB A
MUTING
VOLUME
MENU/EXIT
7
8
MENU/EXIT
1 Remote control cable jack (page 11)
6 MUTING button (page 14)
Connect the remote control cable (not supplied) when
using this remote control as a wired remote control.
Use this button to turn off the volume immediately.
Pressing the button again will resume the previous
volume level.
2 Remote signal transmission window
7 2 / 3 / 5 / ∞ buttons
Use these buttons to select menu items or make
adjustments.
3 POWER ON/OFF button (page 14)
Use this button to turn on/ off the Monitor.
4 DISPLAY button (page 14)
8 MENU/EXIT button
Use this button to display the input terminal, color system
(for VIDEO A or VIDEO B input), scan system (for
COMPONENT input) and horizontal/ vertical frequency
(for RGB A and RGB B input).
Use this button to display or erase menus.
While a sub-menu is displayed, pressing this button will
move you one screen back to the preceding menu.
Pressing the button again will make the display disappear.
9 ASPECT button (page 15)
Use this button to switch between aspect ratios. Each time
5 INPUT SELECT (VIDEO A, VIDEO B, COMPO./(RGB B) and
RGB A) buttons
you press the button, the aspect ratio changes as follows:
REGULAR
FULL
(page 14)
PANORAMIC
ZOOM
Use these buttons to switch between inputs.
To select the COMPONENT or RGB B input, you have to
set “RGB/ COMPO.” correctly on the menu (see page 22).
p VOLUME + / – buttons (page 14)
Use these buttons to adjust the volume level.
• Only for GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
Only RGB A input can be used.
• The VOLUME – button can be also used to display the
Setup Menu (see page 25).
To reproduce images through the other inputs, you need
to install video input unit (IF-C42P1G), which is
separately purchased.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor: Front View
1
2
MENU INPUT
MENU INPUT
3
4
5
6
Bottom View
1 Remote sensor/power lamp
5 INPUT button (page 14)
Point the front end of the wireless remote control toward
Use this button to switch between inputs.
here.
To select the COMPONENT or RGB B input, you have to
set “RGB/ COMPO.” correctly on the menu (see page 22).
• Only for GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
Only RGB A input can be used.
When the Monitor is turned on, the power lamp glows
green. It glows orange in standby mode.
2 Self-diagnostic lamps (page 39)
These lamps light/ flash if something abnormal occurs
with the Monitor.
To reproduce images through the other inputs, you need
to install video input unit (IF-C42P1G), which is
separately purchased.
3 2 / 3 / 5 / ∞ buttons
6
button (page 14)
Use these buttons to select menu items and to make
adjustments.
Use this button to turn on and off the Monitor.
• When no menu is displayed, you can use the 2 / 3
buttons to adjust the volume level.
4 MENU button
Use this button to display or erase menus.
While a sub-menu is displayed, pressing this button will
move you one screen back to the preceding menu.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
(Continued)
Monitor: Rear Views
6
7
9
L
(
(
9
R
EXTERNAL
INTERNAL
8
1
2
3
4
5
OUT
AUDIO
IN
L
MAKE
WIRED
R
RS-232C
REMOTE
POWER
RGB A
AUDIO
AC IN
1 RGB A input terminals (page 11)
• D-sub, 15 pin
3 AUDIO OUT terminals (pin jack) (page 11)
Connect to the audio input terminals of external
equipment such as an amplifier.
Connect to the video output terminal of a personal
computer.
4 AC IN terminal (page 11)
• AUDIO IN (stereo mini jack)
Connect to the audio output terminal of a personal
computer.
Connect the supplied power cord to this terminal.
5 POWER switch (page 14)
Setting this switch to “| (on)” will put the Monitor into
standby mode, allowing you to turn on and off the power
2 REMOTE terminals (pages 11 and 13)
• RS-232C (D-sub, 9 pin)
using the POWER or
button either on the remote
Connect to the RS-232C terminal of a personal computer.
For the control method using this terminal, consult an
authorized JVC dealer.
control or on the Monitor.
6 OPTION terminal (page 13)
• MAKE terminal (mini DIN 4pin)
Connect an external control unit. (See page 13.)
Connect the power cord of the Cooling Fan Unit (not
supplied) when installing the Monitor vertically.
• WIRED terminal (stereo mini jack)
Connect a wired remote control unit to this terminal.
7 SPEAKER OUT L/R terminals (page 11)
Connect external speakers, such as unique JVC speakers
(not supplied), etc.
Note:
• When the above three terminals are used at the same
time, transmitted commands through the MAKE
terminal have priority over those through the other
terminals.
8 INTERNAL/EXTERNAL (built-in speaker/external
speaker) selecting switch (page 11)
INTERNAL:
To use built-in speakers.
EXTERNAL:
To use external speakers.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
* GM-V42PCE, GM-V42PCEG and GM-V42PCEB
do not have the following input terminals—
VIDEO A, VIDEO B, and COMPONENT/ RGB B.
To input video, S-video, and component signals,
you need to install video input unit (IF-C42P1G),
which is separately purchased.
9
p
q
VIDEO
AUDIO
L/MONO
VIDEO
AUDIO
L/MONO
AUDIO
L/MONO
VIDEO
R
R
R
Y/G
Pb/B
Pr/R
HD/Cs
VD
IN
OUT
IN
Y/C IN
VIDEO A
VIDEO B
COMPONENT/RGB B
9 VIDEO A terminals (page 12)
• AUDIO (L/MONO, R) input terminals (pin jack)
q COMPONENT/RGB B input terminals (page 12)
• AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio output terminals of
the other equipment.
Connect these terminals to the audio input terminals of a
VCR, etc.
• VIDEO IN terminal (BNC)
Connect this terminal to the video output terminal of a
VCR, etc.
• G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC)
Connect these terminals to the following output
terminals of a personal computer or other equipment:
– Analog RGB signal output terminals
– Horizontal sync (HD) signal or composite (Cs) signal
output terminal
• VIDEO OUT terminal (BNC)
Connect this terminal to the video input terminal of
another Monitor.
– Vertical sync (VD) signal output terminal
Note:
Notes:
• Since the video output terminals on this Monitor are
loop-through terminals, the devices connected to this
video output terminal should be correctly terminated.
Otherwise, pictures become abnormally bright or the
Monitor screen gets affected abnormally.
• External sync signals are automatically detected when
they come in.
• When both horizontal (HD)/ vertical (VD) sync and
composite (Cs) sync are connected, HD/ VD sync signals
will be used.
p VIDEO B terminals (page 12)
• Y, Pb, Pr (VIDEO) input terminals (BNC)
Connect these terminals to the component signal output
terminals of NTSC or high-vision equipment.
• AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio output terminals of
a VCR, etc.
• Y/C (S video) IN terminal (mini DIN 4pin)
Connect this terminal to the S-video output terminal of a
VCR, etc.
Note:
• When these terminals are used as the component
terminals (Y, Pb, Pr)—see “Setting the COMPONENT/
RGB B Input” on page 22, external sync signals (HD/ Cs,
VD) cannot be used.
• VIDEO IN terminal (pin jack)
Connect this terminal to the video output terminal of a
VCR, etc.
Note:
• When both the video and S-video terminals are
connected, the S-video terminal will have priority.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Checking the Accessories
The following accessories are included with the Monitor. Check for them. If any item is missing, please contact the dealer where
you purchased the Monitor.
• Remote control (RM-C579) x 1
• Power cord x 2 (3 for Australia) (Use the one matching the wall outlet.)
• Batteries (AA/ R6P) x 2
• BNC-RCA convension plug x 3 (For Australia)
• Ferrite core x 1 (Except for GM-V42PCEB)
Installing the Batteries
Put the batteries in the remote control as follows. If the remote control has become erratic in operation, change the batteries.
1 Remove the back cover.
While pushing the release lever on the cover, remove the cover in
the direction of the arrow.
2 Place the batteries.
Put the two supplied batteries (AA/ R6P), noting the ª and ·
markings, as shown.
3 Replace the back cover as illustrated.
Make sure the release lever on the cover is locked in place correctly.
Precautions for using batteries
If batteries are used improperly, the liquid could leak out, causing a fire, injury, etc. or dirtying the vicinity.
Take notice of the following:
• Do not mix old and new batteries.
• Do not mix different types of battery as different types may have different
characteristics.
• Place the batteries according to the ª and · markings indicated on the battery
compartment.
• When installing the batteries, insert the · end first to avoid a short circuit.
• Use only the specified batteries.
• When you are not using the remote control for a long time, remove the batteries.
• When the batteries have reached the end of their life, replace them with new ones
immediately. Otherwise, the liquid may leak out, or malfunction may be caused by
the leaked liquid. If the leaked liquid contacts your skin, wipe off the liquid with a
soft cloth. If the affected skin is left as is, you may get a rough skin.
The instruction below applies
only to the use in Holland.
Gebruike batterijen:
• Do not throw the batteries into fire or try recharging them.
• The service life of batteries is six months to one year for normal use. The supplied
batteries are only for checking the operation and their life may be shorter. When
the remote control operation becomes erratic, replace with new batteries.
Attaching the Ferrite Core (For GM-V42PCE, GM-V42PCEG, and GM-V42S)
Attach the ferrite core to the power cord. Using the power cord without the ferrite core may lead to noise (interference). Open
the ferrite core, insert the power cord and close the ferrite core. Attach the ferrite core to the AC IN end of the power cord.
Ferrite core *
Plug to AC IN
Power cord
* Not supplied to GM-V42PCEB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Precautions
• When mounting the Monitor vertically, consult your dealer. (See also page 13.)
• When installing the Monitor, be sure to use a dedicated Stand Unit, Wall Mounting Unit, or Monitor Hanger Unit, depending
on a particular case. Ask your dealer for installation.
• When installing the Monitor, refer also to the user manual for each option to use. Do not tilt the Monitor rightward, leftward,
or backward.
• Route the power cord and connection cables along wall or floor corners to avoid walking on them.
• For good heat dissipation, try to leave the following distances of space (minimum) around the Monitor.
• The ambient temperature of the installation place should be within the range of 0˚C to 40˚C (slightly variable depending on
ambient conditions for installation.)
• When installing the Monitor in a place, such as near the ceiling, the remote control may not work correctly because of possible
effects from the surroundings. If this happens, use the remote control as a wired remote control or move the Monitor where it
is free from these effects.
When installing the Monitor on a stand
Front View
Side View
200
50
Wall
150
150
MENU INPUT
POWER
50
Unit: mm
Take measures against the Monitor from overturning:
To protect against abnormal events such as earthquakes and to prevent unexpected accidents, take appropriate measures
for preventing the Monitor from overturning; should it overturn, this could lead to personal injury.
For detailed information, refer to the manual supplied for the stand.
When mounting the Monitor on the wall
When hanging the Monitor from the ceiling
Front View
Side View
Side View
200
200
100
100
MENU INPUT
POWER
50
50
Unit: mm
100
Unit: mm
Notes:
• Do not allow the same image (pattern) to be continuously displayed on the screen for a long time; otherwise, the area on the
screen corresponding to the image may vary in brightness, leaving an afterimage on the screen. To reduce the afterimage, you
can use the Refresh function (see page 31).
• The Monitor is manufactured using very high-precision technology, allowing for more than 99.99% active pixels, however, be
aware that only a slight number of pixels may be deficient or lit at all times.
• Do not install the Monitor in such a way that the Monitor and other AV equipment affect each other adversely. (For example,
if a disturbed image or noise due to electromagnetic interference occurs, or if the infrared remote control malfunctions, change
the installation place.)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Precautions
• Before making connections, turn off all the equipment.
• Plugs should be firmly inserted; poor connection could cause noise.
• To unplug a cord, be sure to grasp its plug and pull it out.
• Connect the power cord after having finished all other connections.
• Refer also to the user manual of each piece of equipment.
Available Signals
Video signals
The following signals can be input to this Monitor:
• VIDEO A and VIDEO B terminals accept — PAL, PAL60, NTSC, NTSC4. 43, and SECAM signals.
• COMPONENT/RGB B terminals accept — 480i, 576i, 480p, 576p, 720/ 60p, 1080/ 50i, and 1080/ 60i (1035/ 60i) signals. (You
need to set “RGB/ COMPO.” to “COMPO.” on the menu (see page 21).
(For GM-V42PCE, GM-V42PCEG and GM-V42PCEB, to input the above signals, you need to install the video input unit
(IF-C42P1G), which is separately purchased.)
Computer signals (Preset)
This Monitor has 18 preset video modes for the most popular industrial standard, and the signals of the following image
resolutions can be input to the RGB input terminals.
Screen resolution
Horizontal
Vertical
Horizontal
Frequency (kHz) Frequency (Hz)
Vertical
No.
Signal name
Scan system
1
2
3
4
5
6
7
8
9
PC98
640
640
640
640
640
852
640
800
800
800
800
1024
1024
1024
1024
1152
—
400
400
480
480
480
480
480
600
600
600
600
768
768
768
768
864
—
24.8
31.5
31.5
31.7
37.5
31.7
35.0
35.2
37.9
48.1
46.9
48.4
56.5
60.0
68.7
67.5
15.7
15.6
56.4
70.1
59.9
72.8
75.0
60.3
66.7
56.3
60.3
72.2
75.0
60.0
70.1
75.0
85.0
75.0
59.9
50.0
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Non-interlace
Interlace
VGA400-70
VGA480-60
VGA480-72
VGA480-75
WVGA-60
MAC13”
SVGA-56
SVGA-60
SVGA-72
SVGA-75
XGA-60
10
11
12
13
14
15
16
17
18
XGA-70
XGA-75
XGA-85
XGA+-75
RGB15K-60
RGB15K-50
—
—
Interlace
Notes:
• When a signal other than listed above is input, a part of the screen may become void or an unnecessary picture may appear.
• Signals, though they are within the acceptable range of frequencies, may not be displayed normally, depending on the signal
type.
• Depending on the connected equipment, the Monitor may not be compatible with composite sync (Cs) or G on sync signals.
• When a preset mode signal is input, the vertical frequency displayed on the screen will have an “*” shown at its right top
position.
• When the No. 6 signal is input, change the aspect ratio to “FULL” with the ASPECT button (page 15) on the remote control or
from the “FUNCTION SELECT” menu (page 21).
• When No. 8 to No. 16 signals are input, thin lines may become obscure for their signal frequencies are higher than the screen
resolution.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Diagrams
Typical connections
❊ For connection, see page 13.
Personal computer
Personal computer
(used as the playback source)
(used to control the Monitor)
Remote control
(supplied)
M E N U / E X I T
Amplifier, etc.
O
V L U M E
M U T I N G
V I D E O
R G B
A
B
A
B )
.
/ ( R C G O B M P O
I N P U T S E L E C T
A S P E C T
Y
D I S P L A
O F F
O N
W O E R
P
N U I T
L
O
C O N
T
T
E
R
R E M O C – 5 7 9 R M
Cable with stereo
mini jacks
(not supplied)
Power cord (supplied)
❊
To a wall outlet
Ferrite core (supplied to GM-V42PCE,
GM-V42PCEG, and GM-V42S)
• Make sure to attach the ferrite core to
the power cord. See also page 8.
OUT
AUDIO
IN
L
MAKE
R
RS-232C
WIRED
REMOTE
RGB A
AUDIO
AC IN
POWER
External speaker connection
External speakers
(Ex. TS-C421SPG)
ª
·
·
ª
To speaker input terminals
To speaker input terminals
When using external speakers,
set this to EXTERNAL.
Note:
How to connect the cords
It is recommended to use the speaker unit—TS-C421SPG (not supplied)
as the external speakers. You can also connect any speakers of the
following specifications:
• Impedance: Between 6 Ω and 8 Ω
• Power handling capacity: More than 3 W
Caution:
• Do not short-circuit the 9 and ( speaker cords each other. (Refer
also to the instructions supplied with the speaker unit when
connecting speakers.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
(Continued)
These terminals are not available for GM-V42PCE, GM-V42PCEG and GM-V42PCEB.
To use them, you need to install video input unit (IF-C42P1G), which is separately purchased.
AV connections
VCR 1
DVD player, etc.
VCR 2
(used as the playback source)
(used as the playback source)
(used as the playback source)
VIDEO
VIDEO
AUDIO
AUDIO
AUDIO
VIDEO
L/MONO
L/MONO
L/MONO
R
R
R
Y/G
Pb/B
Pr/R
HD/Cs
VD
IN
OUT
IN
Y/C IN
VIDEO A
VIDEO B
COMPONENT/RGB B
When connecting another PC to the COMPONENT/ RGB B terminals, set the “RGB/ COMPO.” setting to “RGB”
(see page 22).
To audio output
To G output
To B output
Personal computer
To R output
(used as the playback
source)
To HD/Cs output
To VD output
Notes:
• You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR to the
VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.
• When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the both
terminals are used, S-video terminal will have priority.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an external control unit
When connecting the external control unit to the MAKE terminal, you can operate the following functions through the
MAKE terminal;
• Turn on or off the Monitor.
Preparation: The POWER switch on the rear must be set to “| (on)” (so that the Monitor is in standby mode).
• Select the input.
Preparation: “REMOTE SWITCH” should be set correctly to select your desired input (see page 27).
Notes:
• There is no remote control on/ off switch. When a plug is inserted to the MAKE terminal, remote control through the
external control unit is automatically activated.
• When the other REMOTE terminals are used at the same time, transmitted commands through the MAKE terminal have
priority over those through the other terminals.
• MAKE terminal
• External control unit
Pin number Signal name
Signals
transmitted
6
4
2
5
3
1
1
2
3
4
5
6
GND
GND
TTL level
SW2
=
=
=
H: Power Off
H: Input A*
L: Power On
SW1
L: Input B*
SW DET
GND
H: Not connected
L: Connected
*
Input A and Input B will be determined by the “REMOTE
SWITCH” setting.
IMPORTANT:
External control unit is not commercially available in the market. When you need it, consult your dealer.
Connecting the Cooling Fan Unit (not supplied)
When installing this Monitor vertically, it is required to attach the Cooling Fan Unit.
Note: If you install the Monitor in such a way not instructed in this manual (for example, installing it diagonally), the
Cooling Fan Unit may not be able to cool down the internal heat enough to make the Monitor operate; therefore,
reinstallation or another method for cooling will be required.
• For more detailed connection, refer to the manual supplied with the Cooling Fan Unit.
Cooling Fan Unit:
TS-C01FANG(Option)
O P T I O N
ACIN
L
R
OTU
ADUIO
MKAE
WRIED
R-S32C
ROMTE
RBGA
ADUIO
IN
IMPORTANT:
When installing the Monitor
vertically, consult your dealer.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Daily Operations
1 Turn on the main power.
Rear View
Set POWER on the back of the Monitor to “| (on)”.
The POWER lamp on the upper left of the front panel
glows orange.
2 Turn on the power.
Press POWER ON on the remote control to turn the power
on.
The POWER lamp changes to glow green.
• You can also use the
button on the front panel
(lower right) to turn on the Monitor.
3 Select an input.
Select the desired input by pressing INPUT SELECT
(VIDEO A, VIDEO B, COMPO./ (RGB B) and RGB A).
• You can also select the input by pressing INPUT on the
Monitor. Each time you press the button, the input
mode changes in sequence.
1
VIDEO A
VIDEO B
POWER
RGB A
COMPONENT or RGB B
• Only for GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
You can select only RGB A.*
Ex. When selecting “VIDEO A” input
VIDEO
NTSC
A
Input selected
Input video signal
Note:
RM–C579 REMOTE CONTROL UNIT
• To select “COMPONENT” or “RGB B,” you need to set the
“RGB/ COMPO.” setting correctly.
OFF
POWER
ON
2
4
DISPLAY
ASPECT
4 Adjust the volume.
DISPLAY
:
10
VOLUME
INPUT SELECT
+
–
COMPO.
A
/(RGB B)
3
VIDEO
B
Note:
RGB A
• While no menu is displayed, you can adjust the volume by
pressing 2 / 3 on the Monitor.
MUTING
VOLUME
MUTING
To turn off the volume immediately
Press MUTING.
“MUTING ON” is displayed, and the sound goes out.
Pressing the button again resumes the previous volume level.
To make the screen indication appear
Press DISPLAY.
The types of input and signal are indicated on the screen for
about 3 seconds.
MENU/EXIT
You can also make the screen indication appear using menus
(page 24).
* Only for GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
You need to install the video input unit (IF-C42P1G), which
is separately purchased, to select “VIDEO A,” “VIDEO B,”
and “COMPONENT (or RGB B)” as the input.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Aspect Ratio
With this Monitor, you can select among three types of wide
screens (FULL, ZOOM, and PANORAMIC) in addition to the
REGULAR screen of conventional 4:3 aspect ratio.
Press ASPECT to select the screen size.
Each time you press the button, the screen size changes as
follows:
RM–C579 REMOTE CONTROL UNIT
REGULAR
FULL
PANORAMIC
ZOOM
OFF
POWER
ON
DISPLAY
ASPECT
REGULAR:
Displays at conventional 4:3 aspect ratio.
ASPECT
INPUT SELECT
COMPO.
A
/(RGB B)
VIDEO
B
RGB A
MUTING
VOLUME
FULL:
REGULAR size display is enlarged
horizontally.
MENU/EXIT
ZOOM:
REGULAR size display is enlarged
vertically and horizontally at the same ratio.
PANORAMIC:
REGULAR size display is enlarged
horizontally to the extent that the picture
does not look abnormally.
Precautions for using the screen mode switching function
• This Monitor features a screen mode switching (aspect ratio
change) function. If you select a mode different in aspect
ratio from software such as TV programs, the picture may
look different from original picture. Be aware of this point
when you are selecting a screen mode.
• If you select a wide screen mode while viewing
conventional video programs of the aspect ratio 4:3, some
portions (edges) of the original picture will be cut off, or
deformed. To enjoy the original picture as it is, select
“REGULAR” while viewing such programs.
• If you place the Monitor in a tea room, hotel, etc. for
business purposes or public viewing and modify the picture
by using the screen mode switching (aspect ratio change)
function, this could violate the copyright protected by the
copyright law, which requires your special attention.
• If you make the screen very bright and watch programs
selecting “REGULAR,” for a long period of time, the
Monitor screen may happen to be burned in. If this occurs,
watching programs using a wide screen mode for a while
will reduce the burn-in gradually.
Notes:
• When one of the following signals is being input, you
cannot select the aspect ratio you want.
I 1080/50i, 1080/60i, 1035/60i or 720/60p signal through the
COMPONENT/RGB B input terminals
You can only select FULL.
I When any signal other than RGB15K-60 and RGB15K-50
through the RGB A or COMPONENT/RGB B input terminals
You can select only REGULAR and FULL.
• The aspect ratio can also be changed on the Function
Selection Menu (page 21).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjustments
For video adjustments, use menus.
You can use the buttons either on the remote control or on
Monitor for menu operations.
• Refer also to “Menu Classifications” on pages 34 and 36.
Adjusting the Picture Quality
Picture quality can be set for each input mode.
1 Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
MENU INPUT
MAIN MENU
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
MENU INPUT
ENTER:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“PICTURE ADJ.”
5
5 /
MENU
2 / 3
3 Press 3 to display the Picture
Adjustment Menu.
VIDEO
A
PICTURE ADJ.
:
:
:
:
:
+01
00
–02
00
00
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
ADJUST:
SELECT:
EXIT: MENU
4 Press 5/∞ to move the cursor (3) to the
item you want to adjust.
RM–C579 REMOTE CONTROL UNIT
Item
Adjustment
range
Standard
(Reset)
OFF
POWER
ON
DISPLAY
ASPECT
CONTRAST
–20 to +20
+10
0
INPUT SELECT
BRIGHT (brightness) –20 to +20
COMPO.
A
/(RGB B)
1
CHROMA*
–20 to +20
–20 to +20
–10 to +10
0
VIDEO
B
2
RGB A
PHASE*
0
MUTING
VOLUME
SHARPNESS
sub menu
0
See “To make an adjustment
while viewing the adjustment
bar” on the next page.
2 / 3
5 /
5
reset
See “To reset the adjustments” on
the next page.
MENU/EXIT
MENU/EXIT
1
* Adjustable when viewing the NTSC, PAL or SECAM
signal, or component signal.
2
* Adjustable when viewing the NTSC signal or
component signals.
5 Press 2/3 to make adjustments.
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To make an adjustment while viewing the adjustment
3 Press 3 to display the Size/Position
bar
Adjustment Menu.
After step 3 on page 16, proceed as follows:
SIZE/POSITION ADJ.
1 Press 5/∞ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for CONTRAST appears on the screen.
H
H
V
V
SIZE
POSITION
SIZE
:
:
:
:
:
:
+01
00
–02
00
00
POSITION
DOT CLOCK
CLOCK PHASE
sub menu
reset
*
00
:+01
CONTRAST
+
–
ADJUST:
SELECT:
EXIT: MENU
* Appearing and being adjustable only when you use RGB A or
RGB B input.
3 Press 5/∞ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
4 Press 5/∞ to move the cursor (3) to the
CONTRAST
SHARPNESS
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
BRIGHT
CHROMA
item you want to adjust.
PHASE
Item
Adjustment range
1
H (horizontal) SIZE* –40 to +40
1
H POSITION*
Varies depending on other
settings
To reset the adjustments
After step 3 on page 16, proceed as follows:
1
V (vertical) SIZE*
–40 to +40
1
1 Press 5/∞ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
V POSITION*
Varies depending on other
settings
2
DOT CLOCK*
–10 to +10
–20 to +20
reset
Are you sure?
"YES" then
2
key.
CLOCK PHASE*
"NO" then MENU key.
sub menu
reset
See “To make an adjustment
while viewing the adjustment
bar” on the next page.
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/ EXIT (or MENU on the
Monitor).
See “To reset the adjustments” on
the next page.
Adjusting the Screen Size and Position
1
* Size and position adjustments are so related that if one
is adjusted much, the other’s adjustable range will be
reduced.
The screen size and position can be adjusted.
Adjusted settings can be stored for each signal type; therefore,
when the same signal comes in, the stored settings are
recalled.
• When adjusting the size, the size cannot be adjusted
proportionally, but can be enlarged rightward (or
downward) only and reduced leftward (or upward) only.
Therefore, it is necessary to adjust both the size and position
alternately to adjust to the appropriate size.
2
* DOT CLOCK is the function to adjust the pixel
sampling number of the A/ D converter to the
resolution (the vertical pixel number) of the input
signal.
CLOCK PHASE is the function to adjust the sampling
timing (phase) to the phase of the input signal.
You can use the two functions to reduce flickering and
blurring on the screen when using the RGB A or RGB
B input.
1 Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
5 Press 2/3 to adjust the selected item.
MAIN MENU
PICTURE ADJ.
Cursor (3)
Note:
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
• During size and position adjustments, the Monitor
screen may be distorted. This is normal, but not a
malfunction of the Monitor.
ENTER:
SELECT:
EXIT: MENU
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
2 Press 5/∞ to move the cursor (3) to
“SIZE/POSITION ADJ.”
(To be continued on the next page)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjustments
(Continued)
To make an adjustment while viewing the adjustment
bar
After step 3 on page 17, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for H SIZE appears on the screen.
:+01
H
SIZE
++
+
+
3 Press 5/∞ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
MENU INPUT
H SIZE
H POSITION
V SIZE
DOT CLOCK
CLOCK PHASE
V POSITION
MENU INPUT
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 17, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “reset.”
2 Press 3.
5
5 /
MENU
2 / 3
The confirmation screen appears.
reset
Are you sure?
"YES" then
key.
"NO" then MENU key.
3 Press 3 again to reset the adjustments.
RM–C579 REMOTE CONTROL UNIT
To cancel the reset, press MENU/ EXIT (or MENU on the
Monitor).
OFF
POWER
ON
Note:
DISPLAY
ASPECT
• Adjustment values for both horizontal and vertical sizes of
the screen are so related that if one is adjusted up to near
the maximum value, the attainable value of the other will
be decreased.
INPUT SELECT
COMPO.
A
/(RGB B)
VIDEO
B
RGB A
MUTING
VOLUME
2 / 3
5 /
5
MENU/EXIT
MENU/EXIT
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Color Temperature
Adjusting the White Balance
The adjusted setting applies to all inputs.
G GAIN, B GAIN and R GAIN can be finely adjusted
separately for “HIGH” and “LOW” settings of the color
temperature.
1 Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
1 On the remote control:
MAIN MENU
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
ENTER:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
3 Press 3 to display the Function
Selection Menu.
ADJUST:
SELECT:
EXIT: MENU
FUNCTION SELECT
“ * ” appears
only when you
have adjusted
the White
Balance (see
the right
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
2 Press 5/∞ to move the cursor (3) to
*
“WHITE BALANCE.”
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
ADJUST:
SELECT:
EXIT: MENU
column).
4 Press 5/∞ to move the cursor (3) to
“COLOR TEMP.”
3 Press 3 to display the White Balance
Adjustment Menu.
5 Press 2/3 to make an adjustment.
Each time you press the button, the color temperature
alternates between “HIGH” and “LOW.”
WHITE BALANCE:HIGH
R
G
B
GAIN
GAIN
GAIN
:
:
:
000
001
002
+
–
sub menu
reset
HIGH:
LOW:
To make the screen become bluish.
To make the screen become reddish.
ADJUST:
SELECT:
EXIT: MENU
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
4 Press 5/∞ to move the cursor (3) to the
item you want to adjust.
5 Press 2/3 to adjust the selected item.
Note:
• To make a fine adjustment, adjust “WHITE BALANCE” (see
the right column).
6 Repeat steps 4 and 5 to adjust the other
items.
7 Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
Notes:
• Adjustable range will vary among the Monitors.
• “MAX” may appear soon after you begin adjustment. This
is normal but not a malfunction.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjustments
(Continued)
To make an adjustment while viewing the adjustment
bars
After step 3 on page 19, proceed as follows:
1 Press 5/∞ to move the cursor (3) to “sub menu.”
2 Press 3 to display the Sub Menu.
The Sub Menu for R GAIN appears on the screen.
:
000
+
R
GAIN
–
3 Press 5/∞ to select the Sub Menu you want to adjust.
Each time you press the button, the Sub Menu changes as
follows:
MENU INPUT
R GAIN
G GAIN
B GAIN
MENU INPUT
4 Press 2/3 to adjust the selected item.
5 Repeat steps 3 and 4 to adjust the other items.
6 Press MENU/EXIT (or MENU on the Monitor) three times
to exit from the menu operations.
To reset the adjustments
After step 3 on page 19, proceed as follows:
5
5 /
MENU
2 / 3
1 Press 5/∞ to move the cursor (3) to “reset.”
2 Press 3.
The confirmation screen appears.
reset
Are you sure?
"YES" then
key.
"NO" then MENU key.
RM–C579 REMOTE CONTROL UNIT
3 Press 3 again to reset the adjustments.
To cancel the reset, press MENU/ EXIT (or MENU on the
OFF
POWER
ON
Monitor).
DISPLAY
ASPECT
INPUT SELECT
COMPO.
A
/(RGB B)
VIDEO
B
RGB A
MUTING
VOLUME
2 / 3
5 /
5
MENU/EXIT
MENU/EXIT
1
*
“SIGNAL MODE” appears only when VIDEO A,
VIDEO B, or COMPONENT input is selected.
2
*
“RGB/ COMPO.” appears only when the RGB B
or COMPONENT input is selected.
3
*
“SYNC TERM.” appears only when the RGB B
input is selected.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Aspect Ratio
Setting the Receivable Signal Types
The setting adjusted applies to all inputs.
• You can change the aspect ratio by pressing ASPECT. (See
page 15.)
You can set the receivable signal types. Normally, select
“AUTO.”
A common setting will apply to both the VIDEO A input and
the VIDEO B input, and a different setting will apply to the
COMPONENT input.
1 Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
1 Press MENU/EXIT (or MENU on the
MAIN MENU
Monitor) to display the Main Menu.
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
MAIN MENU
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
SELECT:
EXIT: MENU
ENTER:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
2 Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
3 Press 3 to display the Function
Selection Menu.
3 Press 3 to display the Function
FUNCTION SELECT
Selection Menu.
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
*
FUNCTION SELECT
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
*
ADJUST:
SELECT:
EXIT: MENU
*1 *2 *3
ADJUST:
SELECT:
EXIT: MENU
4 Press 5/∞ to move the cursor (3) to
“ASPECT.”
*1 *2 *3
4 Press 5/∞ to move the cursor (3) to
“SIGNAL MODE.”
5 Press 2/3 to select an aspect ratio you
want.
Each time you press the button, the aspect ratio changes
as follows:
5 Press 2/3 to select the receivable video
signal type.
REGULAR
FULL
Each time you press the button, the receivable video
signal type changes as follows:
PANORAMIC
ZOOM
* For detailed information on these aspect ratios, see
page 15.
• When VIDEO A or VIDEO B input is selected:
AUTO
PAL60
NTSC
N4.43
PAL
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit from the menu
operations.
SECAM
(NTSC4.43)
• When COMPONENT input is selected:
AUTO
480i
576i
Note:
1080i
(1035i)*
720p
480p
• When one of the following signals is being input, you
cannot select the aspect ratio you want.
I 1080/50i, 1080/60i, 1035/60i or 720/60p signal through the
COMPONENT/RGB B input terminals
* Changes according to the “HD SIGNAL MODE”
setting (see page 27).
Aspect ratio is fixed to FULL (“ASPECT” will not appear
on the display).
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
I When any signal other than RGB15K-60 and RGB15K-50
through the RGB A or COMPONENT/RGB B input terminals
You can select only REGULAR and FULL.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjustments
(Continued)
Setting the COMPONENT/RGB B Input
After connecting the playback device such as a PC or a DVD
player to the COMPONENT/ RGB B terminals, you have to
specify which type of signal comes into this terminal—RGB or
component signals.
• Without setting “RGB/ COMPO.” correctly, you cannot
show any picture though you select the COMPONENT or
RGB B input.
1 Press MENU/EXIT (or MENU on the
MENU INPUT
Monitor) to display the Main Menu.
MAIN MENU
PICTURE ADJ.
Cursor (3)
MENU INPUT
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
ENTER:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
5
5 /
MENU
2 / 3
3 Press 3 to display the Function
Selection Menu.
FUNCTION SELECT
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
*
RM–C579 REMOTE CONTROL UNIT
OFF
POWER
ON
ADJUST:
SELECT:
EXIT: MENU
*1 *2 *3
DISPLAY
ASPECT
4 Press 5/∞ to move the cursor (3) to
“RGB/COMPO.”
INPUT SELECT
COMPO.
A
/(RGB B)
VIDEO
B
RGB A
5 Press 2/3 to select the type of signal.
Each time you press the button, the type of signal
accepted alternates between “RGB” and “COMPO.”
MUTING
VOLUME
RGB:
When connecting the playback device such as
a PC, which can emit the RGB signals.
COMPO.: When connecting the playback device such as
a DVD player, which can emit the component
signals.
2 / 3
5 /
5
MENU/EXIT
MENU/EXIT
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
1
*
“SIGNAL MODE” appears only when VIDEO A,
VIDEO B, or COMPONENT input is selected.
2
*
“RGB/ COMPO.” appears only when the RGB B
or COMPONENT input is selected.
3
*
“SYNC TERM.” appears only when the RGB B
input is selected.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the Function Selection Menu Settings
Changing the Resistance of the RGB B
Input Terminals
You can reset all the Function Selection Menu settings at a
time.
You can set the resistance of the two of the RGB B input
terminals to either HIGH (1 kΩ) or LOW (75 Ω):
• HD/ Cs (Horizontal sync/ Composite) terminal
• VD (Vertical sync) terminal.
HIGH is the normal setting. Change the setting to LOW when
you use a long connecting cord and the picture flickers and
blurs on the screen.
1 Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
MAIN MENU
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
1 Press MENU/EXIT (or MENU on the
Monitor) to display the Main Menu.
ENTER:
SELECT:
EXIT: MENU
MAIN MENU
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
2 Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
ENTER:
SELECT:
EXIT: MENU
3 Press 3 to display the Function
Selection Menu.
2 Press 5/∞ to move the cursor (3) to
“FUNCTION SELECT.”
FUNCTION SELECT
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
*
3 Press 3 to display the Function
ADJUST:
SELECT:
EXIT: MENU
Selection Menu.
*1 *2 *3
FUNCTION SELECT
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
*
4 Press 5/∞ to move the cursor (3) to
“reset.”
ADJUST:
SELECT:
EXIT: MENU
*1 *2 *3
5 Press 3.
The confirmation screen appears.
4 Press 5/∞ to move the cursor (3) to
“SYNC TERM.”
reset
Are you sure?
"YES" then
"NO" then MENU key.
key.
5 Press 2/3 to select the terminal
6 Press 3 again to reset the adjustments.
resistance.
To cancel the reset, press MENU/ EXIT (or MENU on
Each time you press the button, the resistance alternates
between “HIGH” and “LOW.”
the Monitor).
HIGH:
LOW:
Initial setting. Normally select this.
When using a long connecting cord and the
picture flickering and blurring on the screen.
6 Press MENU/EXIT (or MENU on the
Monitor) twice to exit the menu
operations.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Convenient Functions
To set the other convenient functions, use menus.
You can use the buttons either on the remote control or on
Monitor for menu operations.
• Refer also to “Menu Classifications” on pages 34 and 36.
Showing On-screen Display
The input mode and signal type will be indicated on the
screen.
• The following procedure can be done by using the buttons
on the Monitor. You can also show these information by
pressing DISPLAY on the remote control. (See page 14.)
MENU INPUT
1 Press MENU (or MENU/EXIT on the
remote control) to display the Main
Menu.
MENU INPUT
MAIN MENU
PICTURE ADJ.
Cursor (3)
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
5
ENTER:
SELECT:
EXIT: MENU
5 /
MENU
2 / 3
2 Press 5/∞ to move the cursor (3) to
“STATUS DISPLAY.”
3 Press 3 to display the current input
terminal and received signal type.
RM–C579 REMOTE CONTROL UNIT
Ex. When selecting “VIDEO A” input
OFF
POWER
ON
VIDEO
NTSC
A
DISPLAY
ASPECT
Input selected
Input Video signal
type
INPUT SELECT
COMPO.
A
/(RGB B)
Ex. When selecting “COMPONENT” input
VIDEO
B
RGB A
COMPONENT
480i
MUTING
VOLUME
Ex. When selecting “RGB A” or “RGB B” input
VOLUME –
RGB
B
(BNC)
37.9kHz
60.3Hz*
2 / 3
5 /
5
When the signal being input is a preset video
mode, an “*” will be shown after the
frequency.
MENU/EXIT
MENU/EXIT
Note:
• If you want to make these information appear automatically
when you change the input mode, see “Showing the
On-screen When Changing the Input Mode” on page 25.
1
*
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
“REMOTE SWITCH” does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Showing the On-screen When Changing
the Input Mode
Confirming the Use Time and Model Name
You can confirm the hours of use and the model name on the
Setup Menu.
This may be necessary when you ask for any service.
With this function, you can see the selected input mode and
signal type when changing the input mode.
1 On the remote control:
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
SET-UP MENU
1/2
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
1
*
1
*
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
2 Keep pressing 5/∞ until the second
2 Press 5/∞ to move the cursor (3) to
page of the Setup Menu appears.
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
“STATUS DISPLAY.”
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
2/2
:
:
OFF
OFF
3 Press 2/3 to select the desired setting.
Each time you press the button, the Status Display
function alternates between “ON” and “OFF.”
reset
all reset
HOUR METER x100h
MODEL NAME
:
:
123
GM-V42PCE
Hours of use
and model
name
ADJUST:
SELECT:
EXIT: MENU
To cancel the Status Display function, select “OFF.”
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
3 Confirm the hour of use and model
name.
• The displayed value for the hours of use is divided by
100. To calculate the actual hours of use, multiply the
displayed value by 100.
• The model name shown on the Setup Menu is an
example.
If you have a different model, its correct model name
will be shown (GM-V42PCEG, GM-V42PCEB and
GM-V42S).
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
Notes:
• The value for the hours of use is added by one hour unit. If
you use the monitor within one hour, it will not be added to
the hours of use.
• The period when the monitor is on standby (the power
lamp glows orange) will not be added to the hours of use.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Convenient Functions
(Continued)
Prohibiting the Monitor’s Button Operations
This function allows you to prohibit the button operations on
the Monitor to prevent malfunction or avoid tampering.
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
MENU INPUT
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
MENU INPUT
1
*
ADJUST:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“CONTROL LOCK.”
5
5 /
MENU
2 / 3
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
3 Press 2/3 to select the desired setting.
Each time you press the button, the Control Lock
function alternates between “ON” and “OFF.”
To cancel the Control Lock function, select “OFF.”
RM–C579 REMOTE CONTROL UNIT
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
OFF
POWER
ON
DISPLAY
ASPECT
INPUT SELECT
Note:
COMPO.
A
/(RGB B)
• Even when the Control Lock function is in use, the
following operations are possible:
– Operation to cancel the Control Lock function
– All operations from the remote control
VIDEO
B
RGB A
MUTING
VOLUME
VOLUME –
2 / 3
5 /
5
MENU/EXIT
MENU/EXIT
1
*
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
“REMOTE SWITCH” does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Remote-Controllable Input
Setting the High-Definition Signal Types
When connecting the external control unit to the REMOTE
MAKE terminal, you need to set the desired input to use,
which you can select from the connected external control unit.
• For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
You cannot use this function unless the video input unit
(IF-C42P1G) is separately purchased and installed.
You can select one of the High-Definition (HD) signal types
through the COMPONENT/ RGB B terminals — 1080i or
1035i. Normally set it to “1080i.”
• Without setting “RGB/ COMPO.” correctly, you cannot
show any picture though you select the COMPONENT
input (see page 22).
1 On the remote control:
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
SET-UP MENU
1/2
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
Cursor (3)
1
*
1
*
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
2 Press 5/∞ to move the cursor (3) to
“HD SIGNAL MODE.”
“REMOTE SWITCH.”
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
3 Press 2/3 to select the desired setting.
Each time you press the button, the HD signal type
alternates between “1080i” and “1035i.”
3 Press 2/3 to select the desired setting.
Each time you press the button, the Remote Switch
Mode changes as follows:
• You can select either “1080i” and “1035i” according to
the HD signal you input — whichever gives you
proportionally shaped pictures.
MODE1: Input alternates between “VIDEO A” and
“VIDEO B” when controlled from the external
control unit.
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
MODE2: Input alternates between “VIDEO A” and
“RGB B/ COMPO.” when controlled from the
external control unit.
MODE3: Input alternates between “VIDEO A” and
“RGB A” when controlled from the external
control unit.
MODE4: Input alternates between “VIDEO B” and
“RGB B/ COMPO.” when controlled from the
external control unit.
MODE5: Input alternates between “VIDEO B” and
“RGB A” when controlled from the external
control unit.
MODE6: Input alternates between “RGB B/ COMPO.”
and “RGB A” when controlled from the
external control unit.
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Convenient Functions
(Continued)
Setting the Clock and the Power On/Off Timer
You can turn the Monitor on and off automatically with the
Power On/ Off timer.
• Since you cannot use the timer functions without setting
the clock, set the clock at first.
• Setting the Clock
You can also adjust the clock with the following procedure.
1 On the remote control:
MENU INPUT
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
MENU INPUT
Press MENU while holding 2 to display
the Setup Menu.
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
1
*
5
5 /
MENU
2 / 3
ADJUST:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“TIMER,” then press 3 to display the
Timer Menu.
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
Before the clock setting
After the clock setting
RM–C579 REMOTE CONTROL UNIT
TIMER
TIMER
:
:
:
:
:
14:25
ON
08:26
ON
PRESENT TIME
POWER-ON SET
:
:
:
:
:
– –:– –
OFF
– – :– –
OFF
PRESENT TIME
POWER-ON SET
P
OWER-ON TIME
P
OWER-ON TIME
POWER-OFF SET
POWER-OFF TIME
reset
POWER-OFF SET
POWER-OFF TIME
reset
OFF
POWER
ON
21:20
– – :– –
DISPLAY
ASPECT
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
INPUT SELECT
COMPO.
A
/(RGB B)
VIDEO
B
3 Press 5/∞ to move the cursor (3) to
“PRESENT TIME,” then press 3.
RGB A
MUTING
VOLUME
4 Press 5/∞ to move the cursor (3) to
“HOURS,” then press 2/3 repeatedly to
adjust the hour (24 hour clock).
VOLUME –
2 / 3
5 /
5
5 Press 5/∞ to move the cursor (3) to
“MINUTES,” then press 2/3 repeatedly
to adjust the minute.
MENU/EXIT
MENU/EXIT
6 Press MENU/EXIT (or MENU on the
Monitor) three times to exit from the
menu operations.
1
*
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
“REMOTE SWITCH” does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
• Using the Power On/Off Timer
Select the item you want to set in step 3 in “Setting the
Clock” (page 28) and follow the instructions below.
3 Press 2/3 to select the desired setting.
Each time you press the button, the Pixel Shift function
alternates between “ON” and “OFF.”
To cancel the Pixel Shift function, select “OFF.”
POWER-ON SET
You can activate/ deactivate the Power-On Timer.
Press 2/3 to select “ON” or “OFF.”
ON: The Monitor automatically turns on at the time
set in “POWER-ON TIME.”
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
OFF: The Power-On Timer is deactivated.
Using the Power Save Function
You can use this function to reduce the electrical consumption
and to extend the lifetime of the Monitor’s screen.
• The brightness of the screen will be reduced.
POWER-ON TIME
You can adjust the time to turn on the Monitor.
Set the hour and minute following steps 4 to 6 in “Setting
the Clock” (page 28).
POWER-OFF SET
1 On the remote control:
You can activate/ deactivate the Power-Off Timer.
Press 2/3 to select “ON” or “OFF.”
ON: The Monitor automatically turns off at the time
set in “POWER-OFF TIME.”
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
OFF: The Power-Off Timer is deactivated.
POWER-OFF TIME
You can adjust the time to turn off the Monitor.
Set the hour and minute following steps 4 to 6 in “Setting
the Clock” (page 28).
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
1
*
Using the Pixel Shift Function
ADJUST:
SELECT:
EXIT: MENU
This function periodically shift the position (pixels) of the
displayed picture on the screen so that you can avoid the
screen from being burned in.
2 Press 5/∞ to move the cursor (3) to
“POWER SAVE” (on the second page).
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
2/2
:
:
OFF
OFF
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
reset
all reset
HOUR METER x100h
MODEL NAME
:
:
123
GM-V42PCE
ADJUST:
SELECT:
EXIT: MENU
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
1
*
3 Press 2/3 to select the desired setting.
SAVE1: The screen gets dim.
ADJUST:
SELECT:
EXIT: MENU
SAVE2: The screen gets dimmer.
OFF: The Power Save function is deactivate.
To cancel the Power Save function, select “OFF.”
2 Press 5/∞ to move the cursor (3) to
“PIXEL SHIFT” (on the second page).
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
4 Press MENU/EXIT (or MENU on the
Monitor) once to exit from the menu
operations.
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
2/2
:
:
OFF
OFF
reset
all reset
HOUR METER x100h
MODEL NAME
:
:
123
GM-V42PCE
ADJUST:
SELECT:
EXIT: MENU
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Convenient Functions
(Continued)
Preventing the Afterimage Effect
After showing the same still picture on the screen, reverse the
color on the screen using this function so that you can avoid
the screen from being burned in with the still picture.
You can activate/ deactivate the function with the Color-
Reverse On/ Off Timer.
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
MENU INPUT
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
MENU INPUT
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
1
*
ADJUST:
SELECT:
EXIT: MENU
5
5 /
MENU
2 / 3
2 Press 5/∞ to move the cursor (3) to
“COLOR-REVERSE” (on the second
page), then press 3.
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
2/2
:
:
OFF
OFF
RM–C579 REMOTE CONTROL UNIT
reset
all reset
HOUR METER x100h
MODEL NAME
OFF
POWER
ON
:
:
123
GM-V42PCE
DISPLAY
ASPECT
ADJUST:
SELECT:
EXIT: MENU
INPUT SELECT
COMPO.
A
/(RGB B)
3 Press 5/∞ to select the item you want
VIDEO
B
to set and set the item as follows.
RGB A
MUTING
VOLUME
COLOR-REVERSE
You can activate/ deactivate the function manually.
Press 2/3 to select the desired setting.
VOLUME –
ON:
The function is activated immediately after
exiting the menu operations.
2 / 3
5 /
5
OFF: The function is deactivated.
TIMER: Select this when you use the Color-Reverse
On/ Off Timer.
MENU/EXIT
MENU/EXIT
Note:
• Set the clock (see page 28) and select “TIMER,” before
using the Color-Reverse On/ Off Timer.
START SET
You can activate/ deactivate the Color-Reverse On Timer.
Press 2/3 to select “ON” or “OFF.”
ON: The function is automatically activated at the
time set in “START TIME.”
OFF: The Color-Reverse On Timer is deactivated.
1
*
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
“REMOTE SWITCH” does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
START TIME
3 Press 5/∞ to select the item you want
You can adjust the time to activate the function.
• Set the hour and minute following steps 4 to 6 in
“Setting the Clock” (page 28).
to set and set the item as follows.
REFRESH
You can activate/ deactivate the function manually.
• Press 2/3 to select the desired setting.
END SET
You can activate/ deactivate the Color-Reverse Off Timer.
• Press 2/3 to select “ON” or “OFF.”
ON: The function is automatically deactivated at the
time set in “END TIME.”
ON:
The function is activated immediately after
exiting the menu operations.
OFF: The function is deactivated.
TIMER: Select this when you use the Refresh On/ Off
Timer.
OFF: The Color-Reverse Off Timer is deactivated.
Note:
END TIME
• Set the clock (see page 28) and select “TIMER,” before
using the Refresh On/ Off Timer.
You can adjust the time to deactivate the function.
• Set the hour and minute following steps 4 to 6 in
“Setting the Clock” (page 28).
START SET
You can activate/ deactivate the Refresh On Timer.
• Press 2/3 to select “ON” or “OFF.”
ON: The function is automatically activated at the
time set in “START TIME.”
4 Press MENU/EXIT (or MENU on the
Monitor) repeatedly to exit from the
menu operations.
OFF: The Refresh On Timer is deactivated.
To cancel the Color-Reverse function immediately
Repeat steps 1 to 3, then select “OFF” in “COLOR-REVERSE”
by pressing 2/ 3.
START TIME
You can adjust the time to activate the function.
• Set the hour and minute following steps 4 to 6 in
“Setting the Clock” (page 28).
Refreshing the Screen
After the power is turned off, a whitish image may be left on
the screen. In that case, leave the monitor in a white back state
for a while, and the image will disappear.
You can activate/ deactivate the function with the Refresh
On/ Off Timer.
END SET
You can activate/ deactivate the Refresh Off Timer.
• Press 2/3 to select “ON” or “OFF.”
ON: The function is automatically deactivated at the
time set in “END TIME.”
OFF: The Refresh Off Timer is deactivated.
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
END TIME
You can adjust the time to deactivate the function.
• Set the hour and minute following steps 4 to 6 on
“Setting the Clock” (page 28).
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
4 Press MENU/EXIT (or MENU on the
Monitor) repeatedly to exit from the
menu operations.
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
1
*
To cancel the Refresh function immediately
Repeat steps 1 to 3, then select “OFF” in “REFRESH” by
pressing 2/ 3.
ADJUST:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
“REFRESH” (on the second page) then
press 3.
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
2/2
:
:
OFF
OFF
reset
all reset
HOUR METER x100h
MODEL NAME
:
:
123
GM-V42PCE
ADJUST:
SELECT:
EXIT: MENU
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Convenient Functions
(Continued)
Checking the Timer Battery
You can check the remaining time available from the timer
battery on the TIMER, COLOR-REVERSE, and REFRESH
menus.
When the battery becomes weak (BATTERY LOW)
“BATTERY LOW” appears on the screen.
TIMER
PRESENT TIME
POWER-ON SET
POWER-ON TIME
POWER-OFF SET
POWER-OFF TIME
reset
:
:
:
:
:
14:25
ON
08:26
ON
MENU INPUT
21:20
BATTERY LOW
SELECT: EXIT: MENU
ADJUST:
MENU INPUT
When the battery runs out (BATTERY EMPTY)
“BATTERY EMPTY” appears on the screen.
TIMER
PRESENT TIME
POWER-ON SET
POWER-ON TIME
POWER-OFF SET
POWER-OFF TIME
reset
:
:
:
:
:
– – :––
OFF
– – :– –
OFF
5
5 /
MENU
2 / 3
– – :– –
BATTERY EMPTY
SELECT: EXIT: MENU
ADJUST:
The clock is reset and “PRESENT TIME” is shown as “-- : --.”
• You cannot replace the battery yourself. Please consult your
dealer to replace it.
• Set the clock and the timer functions (Power On/ Off Timer,
Color-Reverse On/ Off Timer, and Refresh On/ Off Timer)
again after replacing the battery.
• You can use functions other than the timer functions
without replacing the battery.
RM–C579 REMOTE CONTROL UNIT
OFF
POWER
ON
DISPLAY
ASPECT
INPUT SELECT
COMPO.
A
/(RGB B)
VIDEO
B
RGB A
MUTING
VOLUME
VOLUME –
2 / 3
5 /
5
MENU/EXIT
MENU/EXIT
Notes on the Color-Reverse/Refresh Timer
• Once you set the Color-Reverse/ Refresh timer, the timer
function is still activated even if you turn off the power.
If you turn on the power after the “START TIME” you
set, Color-Reverse/ Refresh function is activated.
To cancel the function, select “OFF” in the menu
(pages 30 and 31).
• The Color-Reverse timer is deactivated when you turn
on or off the Color-Reverse function manually.
The Refresh timer works in the same way as mentioned
above.
Select “TIMER” in the menu to control the functions
automatically ( pages 30 and 31).
1
*
For GM-V42PCE, GM-V42PCEG and GM-V42PCEB:
“REMOTE SWITCH” does not appear on the menu
unless the video input unit (IF-C42P1G) is separately
purchased and installed.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting All the Setup Menu Settings
Resetting All the Menu Settings
You can reset all the following Setup Menu settings at a time,
except the use time (HOUR METER).
You can reset all the Menu settings and adjustments at a time,
except the use time (HOUR METER).
1 On the remote control:
1 On the remote control:
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
Press MENU/EXIT while holding
VOLUME – to display the Setup Menu.
On the Monitor:
On the Monitor:
Press MENU while holding 2 to display
the Setup Menu.
Press MENU while holding 2 to display
the Setup Menu.
SET-UP MENU
1/2
SET-UP MENU
1/2
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
Cursor (3)
Cursor (3)
1
*
1
*
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
2 Press 5/∞ to move the cursor (3) to
2 Press 5/∞ to move the cursor (3) to “all
“reset” (on the second page).
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
reset” (on the second page).
• The Setup Menu consists of two pages. If you keep
pressing 5/ ∞, you can move to the other page from
the current page.
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
MODEL NAME
2/2
SET-UP MENU
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
MODEL NAME
2/2
:
:
OFF
OFF
:
:
OFF
OFF
:
:
123
GM-V42PCE
:
:
123
GM-V42PCE
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
3 Press 3.
3 Press 3.
The confirmation screen appears.
The confirmation screen appears.
all reset
reset
Are you sure?
"YES" then
"NO" then MENU key.
Are you sure?
"YES" then
"NO" then MENU key.
key.
key.
To cancel the reset, press MENU/ EXIT (or MENU on
the Monitor).
To cancel the reset, press MENU/ EXIT (or MENU on
the Monitor).
4 Press 3 again to reset all the Setup
4 Press 3 again to reset all the Menu
Menu settings.
settings and adjustments.
The power is turned off, then turned on again
automatically.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Classifications
Main Menu
Main Menu
Picture Adjustment Menu
:+01
CONTRAST
+
VIDEO
A
–
MAIN MENU
PICTURE ADJ.
:+01
BRIGHT
:
:
:
:
:
+01
00
–02
00
00
CONTRAST
BRIGHT
CHROMA
PHASE
SHARPNESS
sub menu
reset
PICTURE ADJ.
+
–
SIZE/POSITION ADJ.
FUNCTION SELECT
STATUS DISPLAY
:+01
CHROMA
+
–
:+01
PHASE
ADJUST:
SELECT:
EXIT: MENU
ENTER:
SELECT:
EXIT: MENU
+
–
:+01
SHARPNESS
+
–
1
2
* *
1
2
* *
reset
Are you sure?
"YES"
"NO" then MENU
then
key.
key.
Size/Position Adjustment Menu
:+01
H
SIZE
++
+
+
SIZE/POSITION ADJ.
H
H
V
V
SIZE
POSITION
SIZE
:
:
:
:
:
:
+01
00
–02
00
00
00
:+01
H
POSITION
SIZE
++
+ +
POSITION
DOT CLOCK
CLOCK PHASE
sub menu
reset
:+01
:+01
V
ADJUST:
SELECT:
EXIT: MENU
V
POSITION
:+01
DOT CLOCK
+
–
3
3
*
*
:+01
CLOCK PHASE
+
–
reset
Are you sure?
then
"YES"
key.
"NO" then MENU
key.
Function Selection Menu
FUNCTION SELECT
COLOR TEMP.
ASPECT
SIGNAL MODE
RGB/COMPO.
SYNC TERM.
reset
:
:
:
:
:
HIGH
PANORAMIC
AUTO
RGB
HIGH
reset
Are you sure?
"YES"
"NO" then MENU
then
key.
key.
ADJUST:
SELECT:
EXIT: MENU
4
5
6
7
* * * *
Status Display
VIDEO
NTSC
A
Input currently selected
Input video signal
Ex. When “VIDEO A” input is selected.
1
* Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal.
2
* Adjustable when viewing the NTSC signal or component signal.
3
* Adjustable when RGB A or RGB B input is selected.
4
* Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.
5
* Not adjustable when viewing the following component signals—720/ 60p, 1080/ 50i, and 1080/ 60i (1035/ 60i).
6
* Adjustable when RGB B or COMPONENT input is selected.
7
* Adjustable when RGB B input is selected.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE ADJ. (Picture adjustment): See page 16.
CONTRAST
BRIGHT
Adjusts the contrast of the picture.
Adjusts the brightness of the picture.
Adjusts the color density of the picture.
Adjusts the color phase.
1
CHROMA*
2
PHASE*
SHARPNESS
sub menu
reset
Adjusts the outlines of the picture.
Displays the fine adjustment bar.
Resets the Picture Adjustment Menu settings to defaults.
SIZE/ POSITION ADJ. : See page 17.
H.SIZE
Adjusts the horizontal screen size.
H. POSITION
V. SIZE
Adjusts the horizontal screen position.
Adjusts the vertical screen size.
V.POSITION
DOT CLOCK*
Adjusts the vertical screen position.
Adjusts to eliminate stripes or flickering. Use with “CLOCK PHASE.”
Normally, no adjustment is needed.
Adjusts to eliminate stripes or flickering. Use with “DOT CLOCK.”
Normally, no adjustment is needed.
3
3
CLOCK PHASE*
sub menu
reset
Displays the fine adjustment bar.
Resets Size/ position Adjustment Menu settings to defaults.
FUNCTION SELECT: See pages 19 to 23.
COLOR TEMP.
Adjusts the color temperature.
Use when the picture is reddish or bluish.
Selects the horizontal to vertical ratio of the screen.
• Selects a color system (NTSC, PAL, SECAM, NTSC 4.43, PAL60) when VIDEO A or VIDEO B
input is selected.
4
ASPECT*
5
SIGNAL MODE*
• Selects a scan system—480i, 576i, 480p, 720p, 1080i (1035i)—when COMPONENT input is
selected. Normally, set to “AUTO.
Selects the usage of the COMPONENT/ RGB B terminals either as the COMPONENT input
terminal or as the RGB B input terminal.
6
”RGB/ COMPO.*
7
SYNC TERM.*
Adjusts the resistance of RGB B input terminals.
reset
Resets the Function Selection Menu settings to defaults.
1
* Adjustable when viewing the NTSC, PAL or SECAM signal, or component signal.
2
* Adjustable when viewing the NTSC signal or component signal.
3
* Adjustable when RGB A or RGB B input is selected.
4
* Adjustable when VIDEO A, VIDEO B, or COMPONENT input is selected.
5
* Not adjustable when viewing the following component signals—720/ 60p, 1080/ 50i, and 1080/ 60i (1035/ 60i).
6
* Adjustable when RGB B or COMPONENT input is selected.
7
* Adjustable when RGB B input is selected.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Classifications
(Continued)
Setup Menu
White Balance Adjustment Menu
SET-UP MENU
1/2
:
000
+
R
GAIN
STATUS DISPLAY
CONTROL LOCK
REMOTE SWITCH
HD SIGNAL MODE
WHITE BALANCE
TIMER
:
:
:
:
OFF
OFF
MODE1
1080i
–
WHITE BALANCE:HIGH
R
G
B
GAIN
GAIN
GAIN
:
:
:
000
001
002
:+001
+
G
GAIN
+
–
–
sub menu
reset
:–002
B
GAIN
+
–
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
reset
Are you sure?
then
*1
"YES"
"NO" then MENU
key.
key.
Reset Confirmation Screen
Timer Menu
TIMER
PRESENT TIME
POWER-ON SET
OWER-ON TIME
POWER-OFF SET
POWER-OFF TIME
reset
:
:
:
:
:
14:25
ON
08:26
ON
TIMER
PRESENT TIME
HOURS
:
:
:
14:25
14
25
P
MINUTES
21:20
TIMER
POWER-ON TIME
HOURS
MINUTES
:
:
:
08:26
08
26
ADJUST:
SELECT:
EXIT: MENU
TIMER
POWER-OFF TIME
HOURS
MINUTES
:
:
:
21:20
21
20
To “Reset Confirmation Screen”
Color-Reverse Menu
SET-UP MENU
2/2
COLOR-REVERSE
PIXEL SHIFT
:
:
OFF
OFF
COLOR-REVERSE
:
:
:
:
:
OFF
ON
08:06
ON
21:47
COLOR-REVERSE
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER x100h
MODEL NAME
START SET
START TIME
END SET
END TIME
reset
START TIME
HOURS
MINUTES
:
:
:
08:06
08
06
:
:
123
GM-V42PCE
COLOR-REVERSE
END TIME
HOURS
MINUTES
:
:
:
21:47
21
47
ADJUST:
SELECT:
EXIT: MENU
ADJUST:
SELECT:
EXIT: MENU
To “Reset Confirmation Screen”
*2
*1 For GM-V42PCE,
Refresh Menu
REFRESH
REFRESH
START SET
START TIME
END SET
END TIME
reset
:
:
:
:
:
OFF
ON
12:10
ON
GM-V42PCEG, and
GM-V42PCEB:
Appears only when the
video input unit
(IF-C42P1G) is
installed.
REFRESH
START TIME
HOURS
:
:
:
12:10
12
10
MINUTES
14:24
REFRESH
END TIME
HOURS
MINUTES
:
:
:
14:24
14
24
ADJUST:
SELECT:
EXIT: MENU
*2 The model name shown
on the Setup Menu is an
example.
To “Reset Confirmation Screen”
If you have a different
model, its correct model
name will be shown
(GM-V42PCEG,
GM-V42PCEB or
GM-V42S).
all reset
Are you sure?
then
then
"YES"
"NO"
key.
key.
MENU
36
Download from Www.Somanuals.com. All Manuals Search And Download.
STATUS DISPLAY
Sets if you want the input terminal and the type of signal to be indicated on the screen just after
inputs are switched. (See page 25.)
CONTROL LOCK
REMOTE SWITCH
Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 26.)
Set the selectable input terminals when controlling the Monitor with the external control unit (See
page 27.)
HD SIGNAL MODE
WHITE BALANCE
Select the High-Definition (HD) signal type. (See page 27.)
Adjusts R GAIN, G GAIN and B GAIN finely each for “HIGH” and “LOW” settings of the color
temperature. (See page 19.)
TIMER
Sets the clock and the Power On/ Off Timer. (See page 28.)
Sets a screen saver. (See page 29.)
Sets the power save function. (See page 29.)
Use to reverse the color of the still picture to prevent its afterimage from being left on the screen.
(See page 30.)
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR METER
MODEL NAME
Use to eliminate afterimages on the screen. (See page 31.)
Resets the Setup Menu settings to defaults. (See page 33.)
Resets the all menu settings and adjustments to defaults. (See page 33.)
Use to confirm the hours of use. (See page 25.)
Use to confirm your model name. (See page 25.)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Solutions to common problems related to the Monitor are described here. If none of the solutions presented here solves the
problem, unplug the Monitor and consult an authorized dealer or service center.
Symptom
Probable cause
Corrective action
• Insert the power cord (plug) firmly.
• Turn on the POWER switch.
Page
11
Power is not supplied. • Is the power cord disconnected?
• Is the POWER switch turned on?
14
Power is suddenly
turned on or off.
• Is the Power On/ Off Timer activated? • Set the timer to “OFF” on the menu.
28
14
Video image does not • Is the correct input selected?
appear, or audio
sound does not occur.
• Select the correct input by pressing
INPUT SELECT (VIDEO A, VIDEO B,
COMPO./ (RGB B) or RGB A) on the
remote control (or INPUT on the
Monitor).
• Are the devices connected correctly?
• Connect the devices correctly.
• Set the devices correctly.
• Set it correctly.
11, 12
• Are signals being supplied from the
connected devices?
—
• Is “RGB/ COMPO.” set correctly if
using the COMPONENT/ RGB B
terminals?
22
10
• Are input signals (scanning frequency, • Check if the signal is appropriate
etc.) appropriate?
(scanning frequency, etc.), and input
the appropriate signal.
• Is brightness adjusted correctly?
• Is volume set at minimum?
• Adjust brightness on the menu.
• Adjust volume.
16
14
• Are the diagnostic lamps turned on?
• Refer to “Self-diagnostic indication,”
and take an appropriate action.
39
17
The picture becomes • Is the signal RGB input?
• Adjust DOT CLOCK and CLOCK
PHASE using the menu.
blurred.
• Is the RGB B connecting cord long?
• Is brightness adjusted correctly?
• Set the SYNC TERM. “LOW.”
23
16
Color is abnormally
dark or bright.
• Adjust BRIGHT (brightness) using the
menu.
• Is picture quality (colour density, etc.) • Adjust picture using the menu.
adjusted correctly?
16
39
21
“TEMP. OVER” lights (or flashes) at the • Refer to “Self-diagnostic indication,”
right bottom of the screen.
and take an appropriate action.
Color is poor or
unstable.
• Is the correct broadcast system (color
system) selected?
• Set SIGNAL MODE (color system) to
“AUTO.”
• Are signals (scanning frequency, etc.) to • Check if the signal is appropriate
connected devices appropriate?
(scanning frequency, etc.), and input
the appropriate signal.
10
30, 31
17
Color is suddenly
reversed or whitened.
• Is the Color-Reverse/ Refresh timer
activated?
• Set “COLOR-REVERSE”/ “REFRESH”
to “OFF” on the menu.
The picture is cut or
shifted toward one
side.
• Is the size or position of the screen
adjusted properly?
• Adjust H.SIZE, V.SIZE, H.POSITION
or V.POSITION using the menu.
The remote control
does not work.
• Are the batteries correctly set?
• Are the batteries exhausted?
• Insert batteries correctly, observing the
polarities (ª and ·).
8
8
• Replace with new batteries.
• Remove any blocking object.
• Is there any object blocking the path
between the remote control and remote
sensor?
—
• Is the Monitor too far away from you? • Move toward the Monitor, then operate
—
the remote control.
The buttons on the
Monitor do not work.
• Is the Control Lock function in use?
• Set the Control Lock function to “OFF”
using the menu.
26
38
Download from Www.Somanuals.com. All Manuals Search And Download.
If the trouble still persists, follow the procedure below:
Self-diagnostic Indication
When something abnormal occurs with the Monitor, this
function informs you of the condition of the Monitor with
self-diagnostic lamps, allowing for smooth service work.
1 Check which lamps are lighting or flashing.
On the Self-diagnostic Report Sheet (below), check the box
next to “Lights” or “Flashes” of the corresponding lamp or
lamps.
Remote sensor
•
Only one lamp may light or flash, or all three lamps
may do so.
1
2
3
2 Switch off the POWER switch on the back of the
Monitor.
Power lamp
M
E
N
U
I
N
P
U
T
POWER
Self-diagnostic lamps (1 to 3)
3 Unplug the power cord.
4 Call your dealer and tell which lamps are lighting
or flashing. (Copy and fax the Self-diagnostic
Report Sheet below.)
❑If the screen monitor turns off and self-diagnostic
lamps light or flash
If the self-diagnostic lamps light or flash in red, check the
following before consulting the dealer where you
purchased the Monitor.
Note:
If you switch on the main power immediately after switching
it off (or after recovering from a brief power interruption), the
self-diagnostic lamps may light (or flash), and no image may
appear on the screen. In this case, switch off the main power
again, wait for about 10 seconds, then switch it on again. If no
self-diagnostic lamps light or flash, you can operate and use
the Monitor as usual.
•
If self-diagnostic lamp 1 (upper) flashes, lamp 2 (middle)
lights, and lamp 3 (lower) flashes
This may be caused by the dusty intakes on the rear. If
this happens, switch off the main power by POWER
switch (set to “‡ (off)”), unplug the AC power cord,
then clean the intakes by referring to the instruction on
page 2.
– After cleaning, switch on the Monitor’s main power
again. If self-diagnostic lamps do not go off, consult
your dealer immediately.
Self-diagnostic Report Sheet
❑If the screen monitor dims a little and “TEMP. OVER”
lights (or flashes)
If “TEMP. OVER” lights or flashes at the right bottom of the
screen, check the following before consulting the dealer
where you purchased the Monitor.
Store name where you purchased the Monitor
To
Model Name:
“TEMP. OVER” appears to warn you of the internal heat
buildup, which is usually caused by accumulated dust
around the intakes or by improper installation. If the cause
of the internal heat buildup is eliminated, this indication
disappears and the screen recovers the brightness.
Plasma Display Monitor
GM-V42PCE/GM-V42PCEG/
GM-42PCEB/GM-V42S
The self-diagnostic lamps light or flash as listed on the
following table. Please give me immediate advice or service if
necessary.
•
If “TEMP. OVER” flashes in yellow
This may be caused by the dusty intakes on the rear. If
this happens, switch off the main power by POWER
switch (set to “‡ (off)”), unplug the AC power cord,
then clean the intakes by referring to the instruction on
page 2.
Self-diagnostic lamps
NO. Lamp position
Conditions
– After cleaning, switch on the Monitor’s main power
again. If “TEMP. OVER” still flashes, this trouble may
be caused by improper installation or improper
location of the Monitor. In this case, consult your
dealer immediately to solve this improper
installation and to improve the circumstances around
the Monitor.
1
2
3
Upper
Middle
Lower
& Lights
& Flashes
& Flashes
& Lights
& Lights
& Flashes
& Flashes
TEMP. OVER
•
If “TEMP. OVER” lights in red
“TEMP. OVER” will be shown for abut two minutes, the
Monitor will shut off automatically, then the Self-
diagonal lamps light in red. If this happens, switch off
the main power by POWER switch (set to “‡ (off)”),
unplug the AC power cord, then consult your dealer
immediately.
Your Name:
Telephone No.:
Address:
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model name
GM-V42S
GM-V42PCE/GM-V42PCEB GM-V42PCEG
Gray
Frame color
Silver
Screen size
Type 42 wide format
16:9 (Wide format)
852 (H) x 480 (V)
Aspect ratio
Number of pixels displayed
Number of colors displayed
16.77 million (256 colors for each of RGB)
93.3 cm x 53.3 cm, 107.4 cm
Effective screen size
(W x H, Diagonally)
Weight
35.1 kg
External dimensions
(W x H x D)
103.5 cm x 64.0 cm x 8.9 cm
* Excluding protruding parts
Power requirements
Rated input current
Compatible systems
AC 220 – 240 V, 50 Hz/60 Hz
1.4 A
NTSC, NTSC 4.43,
1
1
*
VIDEO A, VIDEO B input PAL, PAL60, SECAM
COMPONENT input
480i, 576i, 480p, 576p, 720/60p,
1080/50i, 1080/60i (1035/60i)
*
Audio power output
SPEAKER OUT: 6 Ω to 8 Ω
3 W + 3 W (TYP at impedance 6 Ω)
Operating conditions
Temperature: 0 °C to 40 °C
Relative humidity: 20 % to 80 % (non-condensation)
(Slightly variable depending on ambient conditions for installation)
VIDEO A
1
*
Video input
BNC terminal x 1, 1 V(p-p), 75 Ω
BNC terminal x 1, 1 V(p-p), 75 Ω
1
*
Video output
Audio input
Pin jack terminal x 2 (L/R)
500 mV(rms), high impedance
1
*
VIDEO B
Y/C input
Y/C terminal x 1
Y: 1 V(p-p), 75 Ω
C: 0.286 V(p-p), 75 Ω (for NTSC)
C: 0.3 V(p-p), 75 Ω (for PAL/SECAM)
1
*
1
1
*
Video input
Audio input
Pin jack terminal x 1, 1 V(p-p), 75 Ω
Pin jack terminal x 2 (L/R)
*
500 mV(rms), high impedance
*1GM-V42PCE, GM-V42PCEG and GM-V42PCEB do not have the following input terminals – VIDEO A, VIDEO B, and
COMPONENT/ RGB B.
You need to install the video input unit (IF-C42P1G), which is separately purchased, to select “VIDEO A,” “VIDEO B,” and
“COMPONENT (or RGB B)” as the input.
*2To use the COMPONENT/ RGB B terminals either as the COMPONENT input terminal or as the RGB B input terminal, you
need to set “RGB/ COMPO.” correctly (see page 22).
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, and may be more or
less different from actual products.
• Design and specifications are subject to change without notice.
• IBM and IBM PC are registered trademarks of International Business Machines Corporation. Macintosh is registered
trademarks of Apple Computer, Inc.
All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered
trademarks of their respective companies.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Model name
GM-V42S
GM-V42PCE/GM-V42PCEB
GM-V42PCEG
COMPONENT/RGB B
COMPONENT input
BNC terminal x 3
Y: 1 V(p-p), 75 Ω
PB/B-Y: 0.7 V(p-p), 75 Ω
PR/R-Y: 0.7 V(p-p), 75 Ω
1
*
*
2
RGB input
BNC terminal x 5
Analog RGB:
R: 0.7 V(p-p), 75 Ω
G: 0.7 V(p-p), 75 Ω
B: 0.7 V(p-p), 75 Ω
G on sync: 1 V(p-p),
75 Ω (negative sync)
Horizontal sync/
1
*
Composite sync (HD/Cs):
HD: 0.3 V(p-p) to 5 V(p-p), 1 kΩ
(positive/negative polarity)/75 Ω
Cs: 0.3 V(p-p) to 5 V(p-p), 1 kΩ
(positive/negative polarity)/75 Ω
2
*
Vertical sync (VD):
VD: 1 V(p-p) to 5 V(p-p), 1 kΩ
(positive/negative polarity)/75 Ω
Audio input
Pin jack terminal x 2 (L/R)
500 mV(rms), high impedance
1
*
RGB A
RGB input
D-sub 3-row 15-pin terminal x 1,
Video signal: 0.7 V(p-p), 75 Ω
G on sync: 1 V(p-p), 75 Ω (negative sync)
Horizontal sync/Composite sync (HD/Cs):
HD: 0.3 V(p-p) to 5 V(p-p), 470 Ω (positive/negative polarity)
Cs: 0.3 V(p-p) to 5 V(p-p), 470 Ω (positive/negative polarity)
Vertical sync (VD):
VD: 1 V(p-p) to 5 V(p-p), 470 Ω (positive/negative polarity)
Audio input
Stereo mini jack terminal x 1
500 mV(rms), high impedance
REMOTE terminals
RS-232C: D-sub 9-pin terminal x 1
MAKE: Mini DIN 4 pin
WIRED: Stereo mini jack terminal x 1
OPTION terminal
Used exclusively for JVC's optional parts
AUDIO OUT terminals
Pin jack terminal x 2 (L/R)
Output impedance 600 Ω
SPEAKER OUT (L/R) terminals Impedance 6 Ω to 8 Ω
Options (not supplied)
Stand Unit
TS-C420P1W, TS-C420P4W, TS-C420P5W, TS-C420P7W
Wall Mounting Unit
Ceiling Suspension Unit
Video Input Unit
Cooling Fan Unit
Speaker Unit
TS-C420P2W, TS-C420P6W
TS-C420P3W
IF-C42P1G (for GM-V42PCE, GM-V42PCEG, and GM-V42PCEB)
TS-C01FANG
TS-C421SPG
* Consult your dealer to see if other options are available.
Notice on transportation
This Monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from other than JVC or JVC-authorized dealers.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
(Continued)
Pin assignment (Specifications for terminals)
• RS-232C terminal
This is a female type connector.
• Y/C terminal
4
3
5
2
1
Pin number Signal name
Pin number Signal name
4
2
3
1
Pin number Signal name
1
2
3
4
5
DCD
RD
6
7
8
9
DSR
RTS
CTS
RI
1
2
3
4
GND (Y)
GND (C)
TD
Y
C
DTR
GND
8
6
9
7
• MAKE terminal
• RGB Input Terminal
Pin number Signal name
Pin number Signal name
6
1
2
3
4
5
6
7
8
Red
Green
Blue
9
10
N/C
GND
GND
N/C
6
4
2
5
3
1
7
Pin number Signal name
11
1
2
3
1
2
3
4
5
6
GND
GND
12
11
13
14
8
N/C
12
SW2
4
5
GND
GND
GND
GND
13
HD/Cs
VD
SW1
14
15
SW DET
GND
9
15
N/C
10
External
GND
Dimensions
Top view
Side view
Front view
1035
89
997
933
57.5
MENU INPUT
POWER
1.5
Unit: mm
42
Download from Www.Somanuals.com. All Manuals Search And Download.
|