PLASMA DISPLAY MONITOR
INSTRUCTIONS
GD-V501PCE
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Notice
WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to
rain or moisture.
Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including
on shelves above, etc.)
WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing
to qualified service personnel.
2) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three pin
earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact an electrician.
Do not defeat the purpose of the earthing plug.
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which case you
may be required to take adequate measures.
CAUTION
This appliance is intended for use in environments which are relatively free of electromagnetic fields.
Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the
input signals could cause the picture and sound to wobble or cause interference such as noise to appear.
To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic fields.
To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.
Trademark Credits
VGA is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, USA.
S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been
fully respected.
•
•
•
Note:
Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to
remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3
mode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Notice
FOR UK ONLY
IMPORTANT: THE MOULDED PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse
is fitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of
5 amps and that it is approved by ASTA or BSI to BS1362.
ASA
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local JVC Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the plug cut off and disposed of safety. There is a danger of severe electrical shock if the
cut off plug is inserted into any 13 amp socket.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow:
Blue:
Brown:
Earth
Neutral
Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is
marked with the letter E or by the Earth symbol
or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the
plug which is marked with the letter L or coloured RED.
How to replace the fuse. Open the fuse compartment with a screwdriver and replace
the fuse.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
WARNING
Setup
This Plasma Display is for use only with the following optional accessories. Use with any other type of optional
accessories may cause instability which could result in the possibility of injury.
(All of the following accessories are manufactured by JVC)
...................................................
Speakers
TS-C5000SPG
TS-C50P1G
IF-C50P1G
•
•
•
•
•
•
.................................................
.......................................
Stand Unit
Video Input Card
....................................
......................
Wall Mounting Unit
Wall Mounting Unit (angled)
TS-C50P6G
TS-C50P2G
TS-C50P3G
............................
Ceiling Suspension Unit
Always be sure to ask a qualified technician to carry out set-up.
Do not place the Plasma Display on sloped or unstable surfaces.
The Plasma Display may fall off or tip over.
•
Do not place any objects on top of the Plasma Display.
If water is spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result
in fire or electric shock. If any foreign objects get inside the Plasma Display, please consult your local JVC dealer.
•
If using the pedestal (optional accessory), leave a space of at least 10 cm at the top, left and right, at least 6 cm
at the bottom, and at least 7 cm at the rear. If using some other setting-up method, leave a space of at least 10
cm at the top, bottom, left and right, and at least 1.9 cm at the rear.
Avoid installing this product near electronic equipment that is easy to receive electromagnetic waves.
It may cause interference in image, sound, etc. In particular, keep video equipment away from this product.
•
When using the Plasma Display
The Plasma Display is designed to operate on 220 - 240 V AC, 50Hz/60Hz.
Do not cover the ventilation holes.
Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display.
•
Do not stick any foreign objects into the Plasma Display.
Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma Display, as
doing so can cause fire or electric shock.
•
Do not remove the cover or modify it in any way.
High voltages which can cause severe electric shocks are present inside the Plasma Display. For any inspection,
adjustment and repair work, please contact your local JVC dealer.
•
Securely insert the power cord plug as far as it will go.
If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall
socket plate is loose, they shall not be used.
•
Do not handle the power cord plug with wet hands.
Doing so may cause electric shocks.
•
Do not do anything that may damage the power cable. When disconnecting the power cable, pull on the plug
body, not the cable.
Do not damage the cable, make any modifications to it, place heavy objects on top of it, heat it, place it near any
hot objects, twist it, bend it excessively or pull it. To do so may cause fire and electric shock. If the power cable is
damaged, have it repaired at your local JVC dealer.
•
If the Plasma Display is not going to be used for any prolonged length of time, unplug the power cord plug
from the wall outlet.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
If problems occur during use
If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come out
from the Plasma Display, immediately unplug the power cord plug from the wall outlet.
If you continue to use the Plasma Display in this condition, fire or electric shock could result. After checking that the
smoke has stopped, contact your local JVC dealer so that the necessary repairs can be made. Repairing the Plasma
Display yourself is extremely dangerous, and shall never be done.
•
If water or foreign objects get inside the Plasma Display, if the Plasma Display is dropped, or if the cabinet
becomes damages, disconnect the power cord plug immediately.
A short circuit may occur, which could cause fire. Contact your local JVC dealer for any repairs that need to be
made.
•
CAUTION
When using the Plasma Display
Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display.
Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands
or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.
•
Be sure to disconnect all cables before moving the Plasma Display.
If the Plasma Display is moved while some of the cables are still connected, the cables may become damaged,
and fire or electric shock could result.
•
Disconnect the power cord plug from the wall socket as a safety precaution before carrying out any cleaning.
Electric shocks can result if this is not done.
•
Clean the power cable regularly to prevent it becoming dusty.
If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in fire.
Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.
•
This Plasma Display radiates infrared rays, therefore it may affect other infrared communication equipment.
Install your infrared sensor in a place away from direct or reflected light from your Plasma Display.
Cleaning and maintenance
The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water to
which a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the same
type until the surface is dry.
•
Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface may
become damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the surface may be adversely affected.
•
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has been
added and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.
•
Do not allow any detergent to come into direct contact with the surface of the Plasma Display.
If water droplets get inside the unit, operating problems may result.
•
Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the
cabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods
in contact with articles made from rubber or PVC.
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Accessories Supply
Check that you have the accessories and items shown
Operating Instruction book
Remote Control
Transmitter
EUR646526
Batteries for the Remote
Control Transmitter
(2 × R6 Size)
Fixing bands × 2
INPUT
SURROUND
VOL
N
R
PICTURE
SOUND
SET UP
GD-V501PCE
PICTURE
POS. /SIZE
ASPECT
PC
OFF TIMER
PLASMA DISPLAY
AC cord
AC cord
(For UK only)
Ferrite core
(small size) × 1
Ferrite core
(large size) × 2
Optional Accessories
Speakers
TS-C5000SPG
Stand Unit
TS-C50P1G
Video Input Card
IF-C50P1G
•
•
•
•
Wall Mounting Unit
TS-C50P6G
Wall Mounting Unit (angled)
TS-C50P2G
Ceiling Suspension Unit
TS-C50P3G
•
•
For assembling
Full instructions are supplied with each optional accessory for use with this Plasma Display.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Batteries
Requires two R6 batteries.
1. Turn the transmitter face down.
Press and slide off the battery
cover.
2. Install the batteries as shown in
the battery compartment.
3. Replace the cover and slide in
reverse until the lock snaps.
(Polarity + or – must match the
markings in the compartment.)
Two "R6" size
Helpful Hint:
For frequent remote control users, replace old batteries with
Alkaline batteries for longer life.
Precaution on battery use
Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display
set.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
1
Speakers (Optional accessories)
2
1
SPEAKERS
Terminals (R)
SPEAKERS
Terminals (L)
AC cord connection
(see page 14)
2
– Cable fixing bands
Secure any excess cables with bands as required.
To secure cables connected to Terminals, wrap the
cable fixing band around them then pass the pointed
end through the locking block, as shown in the figure.
While ensuring there is sufficient slack in cables
to minimize stress (especially in the power cord),
firmly bind all cables with the supplied fixing band.
Pass the attached cable fixing
band through the clip as
shown in the figure.
2
1
To tighten:
To loosen:
Push
the catch
Pull
Pull
AUDIO
PC IN
SERIAL
From EXIT monitor
terminal on Computer Terminal on Computer
(see page 10) (see page 11)
From SERIAL
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
PC Input Terminals connection
COMPUTER
AUDIO
PC IN
POWER
/
INPUT
–
VOL
+
R
G
-
STANDBY
POWER ON
Less than
Conversion adapter
(if necessary)
Ferrite core (large size)
15
3" /16
(supplied)
(10 cm)
D-sub 15p
RGB
PC cable
Less than
15
Ferrite core (small size)
(supplied)
3" /16
(10 cm)
Audio
Stereo plug
Connect a cable which matches
the audio output terminal on the computer.
Installing the ferrite core (Small size)
1
2
3
Open
Press the cable
through and close
Pull back the tabs
(in two places)
Installing the ferrite core (Large size)
1
2
3
Open
Press the cable
through and close
Pull back the tabs
(in two places)
Notes:
(1) Computer signals which can be input are those with a horizontal scanning frequency of 15.5 to 110 kHz and vertical
scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.)
(2) The display resolution is a maximum 1,024 × 768 dots when the aspect mode is set to “4:3”, and 1,366 × 768 dots
when the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to
show fine detail with sufficient clarity.
(3) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible,
you will need to make setting changes to the computer at the time of connection.
(4) Some PC models cannot be connected to the set.
(5) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
(6) The computer shown in the illustration is for example purposes only.
(7) Additional equipment and cables shown are not supplied with this set.
(8) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified
frequency range.
Signal Names for D-sub 15P Connector
Pin No.
Signal Name
Pin No.
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
GND (Ground)
SDA
11 12 13 14 15
10
1
2
3
4
5
R
6
7
11
12
13
14
15
6
7
8
9
G
1
2
3
4
5
B
8
HD/SYNC
VD
Pin Layout for PC
Input Terminal
GND (Ground)
GND (Ground)
9
10
SCL
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
SERIAL Terminals connection
The SERIAL terminal is used when the Plasma Display is controlled by a computer.
COMPUTER
6
7
8
9
1
2
3
4
5
Ferrite core
(large size)
(supplied)
RS-232C
straight cable
SERIAL
Pin layout for RS-232C
Installing the ferrite core
(Large size)
Open
Less than
D-sub 9p
15
3" /16
(10 cm)
Notes:
(1) Use the RS-232C cable to connect the computer to the Plasma Display.
(2) The computer shown is for example purposes only.
(3) Additional equipment and cables shown are not supplied with this set.
The SERIAL terminal conforms to the RS-232C interface specification, so that the Plasma Display can be controlled by
a computer which is connected to this terminal.
The computer will require software which allows the sending and receiving of control data which satisfies the conditions
given below. Use a computer application such as programming language software. Refer to the documentation for the
computer application for details.
Communication parameters
Signal level
Synchronization method
Baud rate
RS-232C compliant
Asynchronous
9600 bps
None
RS-232C Conversion cable
D-sub 9-pin female
Details
R X D
T X D
2
3
Parity
5
GND
Non use
Character length
Stop bit
8 bits
4 • 6
1 bit
7
8
Flow control
Shorted
NC
1 • 9
Basic format for control data
Command
Command Parameter
The transmission of control data from the computer
starts with a STX signal, followed by the command,
the parameters, and lastly an ETX signal in that order.
If there are no parameters, then the parameter signal
does not need to be sent.
Control details
Power ON
Power OFF
Volume 00 - 63
Audio mute OFF
Audio mute ON
PON
POF
AVL
None
None
0**
AMT
STX
C1 C2 C3
:
P1 P2 P3 P4 P5
ETX
1
Colon Parameter(s) End
Input select (toggle)
AV Mode
Component / RGB mode (processed as a
Y/PB/PR or RGB signals as set by this unit)
PC Mode
Screen mode select (toggle)
4 : 3
Zoom
16 : 9
Just
IIS
(
VIDEO
INPUT
CARD)
DAM
None
When Used VID
(1 - 5 bytes) (03h)
Start
(02h)
3-character
command (3bytes)
YP1
Notes:
(1) If multiple commands are transmitted, be sure to
wait for the response for the first command to come
from this unit before sending the next command.
(2) If an incorrect command is sent by mistake, this
unit will send an “ER401” command back to the
computer.
RG1
None
NORM
ZOOM
FULL
JUST
SELF
Auto
With the power off, this display responds to PON command only.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Controls
INPUT
–
VOL
+
R - STANDBY
POWER ON
G
Volume Adjustment
Press the Volume Up “+”
or Down “–” button to
increase or decrease the
sound volume level.
Main Power On/Off Switch
Power Indicator
The Power Indicator will light.
INPUT button
(AV(S Video), Component/RGB and
PC Mode Selection)
Press the “INPUT” button to select AV
(S Video), Component/RGB and PC
input signal modes sequentially.
(see page 15)
Power-OFF...Indicator not illuminated
(The unit will still consume some power as
long as the power cord is still inserted into
the wall outlet.)
•
Stand-by ....Red
Power-ON .....Green
•
•
Stand-by (ON/OFF) button
The Plasma Display must first be plugged into the wall outlet
and turnded on at the power switch (see page 14).
Press this button to turn the Plasma Display On, from Stanby mode.
Press it again to turn the Plasma Display Off to Stanby mode.
Status button
Press the “Status” button to display the current system status.
N button
(see page 21, 22, 24, 25)
AV
4:3
1
2
Off timer
90
3
PICTURE button
(see page 24)
1 AV(S Video), Component/RGB, PC mode
2 Aspect mode (see page 18)
3 Off timer
The off timer indicator is displayed only when the off timer has
been set.
PICTURE POS./SIZE button
(see page 20)
PC button
Press the “PC” mode selection button to select
the PC mode.
This button is used to switch directly to PC mode.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Controls
Explanations from here onward describe the functions when the optional Video Input Card is installed.
SURROUND button
(see page 23)
INPUT button
(AV(S Video), Component/RGB and PC Mode
Selection)
Press to select AV(S Video), Component/RGB and PC
input signal modes sequentially. (see page 15)
Sound mute On/Off (see page 22)
INPUT
Volume Adjustment
Press the Volume Up “+” or Down “–” button to
increase or decrease the sound volume level.
SURROUND
VOL
R button (see page 17)
N
R
ACTION button
Press to make selections
POSITION buttons
PICTURE
SOUND
SET UP
SET UP button (see page 16)
SOUND button (see page 22)
PICTURE
POS. /SIZE
ASPECT
ASPECT button
Press to adjust the aspect. (see page 18)
PC
OFF TIMER
OFF TIMER button
The Plasma Display can be preset to switch to stand-by
after a fixed period. The setting changes to 30 minutes,
60 minutes, 90 minutes and 0 minutes (off timer
cancelled) each time the button is pressed.
PLASMA DISPLAY
30
60
90
0
When three minutes remain, “Off timer 3” will flash.
The off timer is cancelled if a power interruption occurs.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On/Off and input signal selection
AC cord connection
Connecting the AC cord plug to the Plasma Display.
Power On/Off
Connecting the plug to the Wall Outlet
Note:
Main plug types vary between countries. The power plug
shown at left may, therefore, not be the type fitted to
your set.
Press the Power switch on the Plasma Display to turn
INPUT
—
VOL
+
R
G
-
STANDBY
P
O
W
E
R
O
N
the set on : Power-On.
Power Indicator: Green
R
G
-
STANDBY
POWER ON
Example: The screen below is displayed for a while after
the Plasma Display is turned on. (setting
condition is an example.)
Remote Control Sensor
Power Indicator
From the second time on, the below screen
is displayed for a while (setting condition is
an example).
When the Power is turned on for the first
time, the Language selection screen is
displayed.
OSD Language
g
(
)
En lish UK
Deutsch
Fran ais
Italiano
AV
4:3
From the second time on, language
selection can be done from the setup
menu. (see page 15)
p
Es a ol
(
)
ENGLISH US
Select the desired language using the
and keys and press the ACTION
button.
Select
Set
Press the
button on the remote control to turn the
Plasma Display off.
INPUT
SURROUND
VOL
Power Indicator: Red (standby)
Press the
button on the remote control to turn the
Plasma Display on.
Power Indicator: Green
Turn the power to the Plasma Display set off by pressing
N
R
the
switch on the Plasma Display, when the Plasma
Display is on or in standby mode.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On/Off and input signal selection
Select the input signal
INPUT
Press the INPUT button to select the input
signal to be played back from the equipment
which has been connected to the Plasma
Display.
Select the input signals to be connected by
installing the optional Video Input Card.
(see page 30)
INPUT
—
VOL
+
R
G
-
STANDBY
POWER ON
Input signals will change as follows:
For Component Input
INPUT
—
VOL
+
AV
Component
PC
For RGB Input
AV
RGB
PC
INPUT
SURROUND
VOL
Note:
Input buttons do not work if no optional Video Input Card is installed.
Selecting the On-Screen Menu Language
SET UP
Press to display the Set Up menu.
Press to select the OSD Language.
INPUT
Press to select your
SURROUND
preferred language.
VOL
Setup
N
R
Component/RGB-in select
RGB
Signal
Screensaver
OSD Language
Set up TIMER
Selectable languages
(
)
English UK
PICTURE
SOUND
SET UP
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
.......
(Chinese)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Menu Display from Remote Control
To Picture adjust menu
(see page 24)
Press to select each item.
Picture
Normal
Normalise
Picture Mode
Contrast
Brightness
Colour
Normal
20
0
0
Tint
0
INPUT
Sharpness
White balance
Advanced settings
0
Normal
On
SURROUND
Setup
Component/RGB-in select
RGB
VOL
To Advanced Settings
(see page 24, 25)
Signal
Screensaver
N
R
(
)
OSD Language
English UK
Advanced Settings
Set up TIMER
Normal
Normalise
Black extension
0
0
0
0
0
W/B High
W/B High
W/B Low
W/B Low
Gamma
R
B
R
B
2. 2
To setup Screensaver
(see page 28)
PICTURE
SOUND
SET UP
PICTURE
POS. /SIZE
ASPECT
To Sound adjust menu
(see page 22)
Setup
Component/RGB-in select
RGB
Sound
PC
OFF TIMER
Signal
Screensaver
Normal
Normalise
Sound Mode
Bass
Treble
Balance
Surround
Normal
(
)
OSD Language
English UK
0
0
0
Set up TIMER
On
PLASMA DISPLAY
To Picture Pos./Size adjust
menu (see page 20)
During “AV(S Video)” and
“Component” input signal modes.
Picture Pos./Size
Normal
Normalise
H-Pos
H-Size
V-Pos
V-Size
Setup
Component/RGB-in select
RGB
Signal
Screensaver
During “RGB” and “PC”
(
)
OSD Language
Set up TIMER
English UK
input signal modes.
Picture Pos./Size
Normal
Normalise
H-Pos
H-Size
V-Pos
V-Size
Clock Phase
16
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Menu Display from Remote Control
Press to access each adjust
screen.
R
Press the R buttun to return to
“Setup” menu.
To Signal screen for AV
(see page 30, 31)
To Signal screen for
Component (see page 31) (see page 32)
To Signal screen for RGB To Signal screen for PC
(see page 32)
[
]
[
]
[
]
Signal
AV
[
]
Signal
Sync
RGB
Signal
Sync
PC
Signal
Component
Off
(
)
3D Y/C Filter NTSC
Colour system
3:2 Pulldown
On
Auto
Off
H & V
H & V
3:2 Pulldown
H
-
Freq.
31.5 kHz
60.0 Hz
H
-
Freq.
31.5 kHz
60.0 Hz
V-
Freq.
V
-
Freq.
(
)
Aspect Auto 4:3
4 : 3
Note:
“Signal” setup menu displays different setting condition for each input signals. (see page 15)
Start Time
Press to select
Start Ttime
0 : 00
each time adjust
screen.
Hours Adjustment
Minutes Adjustment
00
00
Screensaver
Function
White bar scroll
Mode
Time Designation
Finish Time
Start Time
Finish Time
SP Adjustment
0:00
0:00
Mid
Finish Time
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
Press to display each
adjust screen.
Periodic Time
R
Screensaver
Periodic Time
Hours Adjustment
Minutes Adjustment
0:00
00
00
Function
Mode
Periodic Time
Operating Time
SP Adjustment
White bar scroll
Interval
0:00
Press the R buttun to return
to “Screensaver” menu.
0:00
High
Operating Time
Operating Time
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
To Set up Timer selection
screen (see page 26)
Press to select each Timer
adjustment items.
PRESENT TIME Setup
PRESENT TIME
Hours Adjustment
Minutes Adjustment
99 : 99
00
Set up TIMER
00
Press to display each
adjust screen.
PRESENT TIME
0:52
Off
0:00
Off
POWER ON Function
POWER ON Time
POWER OFF Function
POWER OFF Time
POWER ON Setup
POWER ON Time
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
0:00
R
POWER OFF Setup
POWER OFF Time
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
Press the R buttun to return
to “Set up TIMER” menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
ASPECT Controls
The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema
format picture.
ASPECT
ASPECT button
The aspect mode changes each time the ASPECT button
is pressed.
4 : 3
Zoom
16 : 9
INPUT
Auto
Just
SURROUND
Notes:
VOL
(1) During RGB and PC input signal modes, the mode switches between
“4:3”, “Zoom” and “16:9” only.
N
R
(2) For a 1,125i (1,080i), 750p (720p) signal input during “Component”
input signal mode, the mode is set to “16:9” mode, and switching is
not possible.
For a 525i (480i), 625i (575i), 525p (480p) and 625p (575p) signal
input during “Component” input signal mode, “Auto” can not be
selected.
PICTURE
SOUND
SET UP
(3) The aspect mode is memorized separately for each input terminal
(AV(S Video), Component, RGB and PC).
PICTURE
POS. /SIZE
ASPECT
PC
OFF TIMER
PLASMA DISPLAY
18
Download from Www.Somanuals.com. All Manuals Search And Download.
ASPECT Controls
Picture
Explanation
Mode
4 : 3
4:3 will display a 4:3 picture at its standard 4:3 size.
4
4 : 3
3
4
16
Zoom mode magnifies the central section of the
picture.
Zoom
Zoom
16 : 9
Just
3
9
9
16:9 will display the picture at its maximum size but
with slight elongation.
4
16
16 : 9
3
Just mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the center
of the screen so that elongation is only apparent at
the left and right edges of the screen. The size of
the picture will depend on the original signal.
4
16
Just
3
9
The display will automatically become enlarged
(depending on the picture source), allowing you to
view the picture at its maximum size.
4
16
Auto
3
9
Note:
For an elongated image
4
Image is expanded
Auto mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program
material. Certain 4:3 program material, such as
stock market data screens, may occasionally cause
the image size to change unexpectedly. When
viewing such programs, it is recommended that the
ASPECT be set to 4:3.
Auto
Changes in accordance
with the Aspect Auto
mode setting (see page
31).
3
For a 4:3 image
Note:
• Do not allow the picture displayed in 4:3 mode for an extended period, as this can cause a parmanent after-image to
remain on the Plasma Display Panel.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Picture Pos./Size
Adjusting screen
PICTURE
POS. /SIZE
1
Press to display the Picture Pos./Size
menu.
INPUT
SURROUND
Press to select H-Pos/H-Size/V-Pos/V-
Size/Clock Phase.
2
VOL
N
R
During “AV(S Video)” and
During “RGB” and “PC”
PICTURE
SOUND
SET UP
“Component” input signal modes.
input signal modes.
Picture Pos./Size
Picture Pos./Size
PICTURE
POS. /SIZE
ASPECT
Normal
Normal
Normalise
Normalise
H-Pos
H-Size
V-Pos
V-Size
H-Pos
H-Size
V-Pos
V-Size
PC
OFF TIMER
Clock Phase
Press to adjust Pos./Size.
3
PLASMA DISPLAY
R
Press to exit from adjust mode.
Notes:
(1) Adjustment details are memorized separately for different input signal formats (Adjustments for component signals
are memorized for 525i (480i), 625i (575i), 525p (480p), 1,125i (1,080i) and 625p (575p), 750p (720p) each, and
RGB/PC signals are memorized for each frequency.)
(2) If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This
picture position movement cannot be controlled by the Picture Pos./Size function.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Picture Pos./Size
“ ”
“ ”
“ ”
“ ”
“ ”
“ ”
“ ”
“ ”
When the Position Left
When the Position Left
When the Position Left
When the Position Left
button is pressed. When the Position Right
button is pressed. When the Position Right
button is pressed. When the Position Right
button is pressed. When the Position Right
button is pressed.
button is pressed.
button is pressed.
button is pressed.
H-Pos
H-Size
V-Pos
V-Size
“ ”
“ ”
button
Clock Phase
Flickering and distortion can be eliminated by using the Position Left
or Right
(RGB/PC in Mode) to carry out adjustment.
Helpful Hint ( N /
Normalisation)
Normalise
While the Picture Pos./Size display is active, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
SOUND
1
Press to display the Sound menu.
INPUT
SURROUND
Select to adjust each item.
2
VOL
Press to select the desired adjustment menu.
Select the desired level by listening to the sound.
N
R
PICTURE
PICTURE
SOUND
SET UP
Bass
Adjusts low sounds
Sound
Normal
Emits the original sound.
Normal
Normalise
Sound Mode
Bass
Normal
On
Treble
Adjusts high sounds
0
0
0
Treble
Balance
Surround
Balance
Adjusts left and right
volumes
Automatically controls
proper volume level.
Auto
Surround (see next page)
Select On or Off
To end adjustments
•
R
Press the R button
Note:
Press the SURROUND button to directly turn the surround effect On and Off. (see next page)
Bass, Treble and Surround settings are memorized separately for each Sound mode (Normal, Auto).
N
Normalise
Helpful Hint ( /
Normalisation)
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Mute
Useful when answering the phone or receiving unexpected visitors.
Press this button to mute the sound.
Press again to reactivate sound. Sound is also reactivated when power is turned off or
volume level is changed.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround Controls
SURROUND
SURROUND Button
The benefits of surround sound are enormous. You can be
completely enveloped in sound; just as if you were at a concert
hall or cinema.
The surround setting switches on and off each time the
SURROUND button is pressed.
INPUT
SURROUND
VOL
On
Off
N
R
PICTURE
SOUND
SET UP
Surround
On
PICTURE
POS. /SIZE
ASPECT
Note:
The surround settings are memorized separately for each Sound mode
(Normal, Auto).
PC
OFF TIMER
PLASMA DISPLAY
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjustments
PICTURE
1
Press to display the Picture menu.
Picture
Normal
Normalise
Picture Mode
Contrast
Normal
Select to adjust each item.
20
0
0
2
Brightness
Colour
Tint
Press to select the menu to adjust.
0
Sharpness
White balance
0
Normal
On
Select the desired level by looking at the picture
behind the menu.
Advanced Settings
Press the left or right button to switch between
modes.
Picture
Normal
Normalise
Picture Mode
Contrast
Brightness
Colour
Normal
Normal
Dynamic
Cinema
20
0
0
Tint
Sharpness
White balance
0
0
Normal
Normal
On
For viewing in standard (evening lighting)
environments.
Advanced settings
This menu selects the normal levels of
Brightness and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Press the left or right button to
select “On”. Press the down button to
enter Advanced Settings mode.
Advanced Settings On
Enables fine picture adjustment at a
professional level (see next page).
Brightness and Contrast
.
Cinema
Ideal for movies.
Advanced Settings
Note:
Normal
Normalise
If you would like to change the picture and colour of
the selected Picture menu to something else, adjust
using the items in the Picture menu. (see next page)
Black extension
W/B High R
W/B High B
0
0
0
0
0
W/B Low
W/B Low
Gamma
R
B
2. 2
Press the left or right button to switch between
modes.
Advanced Settings Off
Displays images with settings of the
Picture menu.
Normal
Cool
Warm
N
Normalise
Helpful Hint ( /
Normalisation)
While the “Picture” menu is displayed, if either the N button on the remote control is pressed at any time or the
(ACTION button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjustments
Notes:
Item
Effect
Adjustments
(1) “Colour” and “Tint” settings cannot
be adjusted for “RGB” and “PC”
input signal modes.
(2) You can change the level of each
function (Contrast, Brightness,
Colour, Tint, Sharpness) for each
Picture menu.
(3) The setting details for normal,
dynamic and cinema respectively
are memorized separately for each
input mode (AV(S Video), Component,
RGB and PC).
(4) The “Tint” setting can be adjusted
for NTSC signal only during “AV
(S Video)” input signal.
Selects the proper brightness and
density for the room.
Contrast
Less
Darker
Less
More
Adjusts for easier viewing of dark pictures
such as night scenes and black hair.
Brightness
Colour
Brighter
More
Adjusts colour saturation.
Adjust for nice skin colour.
Adjusts picture sharpness.
Tint
(NTSC only)
Reddish
Less
Greenish
More
Sharpness
Note:
In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a
dark picture.
Advanced Settings
Item
Effect
Details
Black
extension
Adjusts the dark shades of the image in gradiation.
Less
Less
Less
More
W/B High R
W/B High B
W/B Low R
W/B Low B
Gamma
Adjusts the white balance for light red areas.
Adjusts the white balance for light blue areas.
Adjusts the white balance for dark red areas.
Adjusts the white balance for dark blue areas.
More
More
Less
Less
Down
More
More
Up
2.0
2.2
2.5
Notes:
(1) Carry out “W/B” adjustment as follows.
A Adjust the white balance of the bright sections using the “W/B High R” and “W/B High B” settings.
B Adjust the white balance of the dark sections using the “W/B Low R” and “W/B Low B” settings.
C Repeat steps A and B to adjust.
Steps A and B affect each other’s settings, so repeat each step in turn to make the adjustment.
(2) The adjustment values are memorized separately for each input mode (AV(S Video), Component, RGB and PC).
(3) The adjustment range values should be used as an adjustment reference.
Helpful Hint ( N /
Normalisation)
Normalise
On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any
time or the
(ACTION button) is pressed during “Normalise”, then all adjustment values are returned to the
factory settings.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Set up TIMER
The timer can switch the Plasma Display On or Off.
Before attempting Timer Set, confirm the PRESENT TIME and adjust if necessary.
Then set POWER ON Time / POWER OFF Time.
Display the Set up TIMER screen.
SET UP
1
Setup
Press to display the
INPUT
Setup menu screen.
Component/RGB-in select
RGB
SURROUND
Signal
Screensaver
OSD Language
Set up TIMER
Press to select
Set up TIMER.
2
VOL
(
)
English UK
N
R
Set up TIMER
Press to display
the Set up TIMER
screen.
PRESENT TIME
0:52
Off
0:00
Off
POWER ON Function
POWER ON Time
POWER OFF Function
POWER OFF Time
PICTURE
SOUND
SET UP
0:00
PRESENT TIME Set
To set up PRESENT TIME, follow the procedure described below.
Press to select PRESENT TIME.
Set up TIMER
1
PRESENT TIME
0:52
Off
0:00
Off
POWER ON Function
POWER ON Time
POWER OFF Function
POWER OFF Time
0:00
Press to display the PRESENT TIME
Setup screen.
PRESENT TIME Setup
PRESENT TIME
Hours Adjustment
Minutes Adjustment
99 : 99
00
00
Press to select Hours Adjustment /
Minutes Adjustment.
PRESENT TIME Setup
2
PRESENT TIME
Hours Adjustment
Minutes Adjustment
0 : 52
00
52
Press to set up Hours or Minutes.
button: Forward
button: Back
Press to store PRESENT TIME Setup.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup TIMER
TIMER Set
1
Press to select
POWER ON Time/POWER OFF Time.
Set up TIMER
PRESENT TIME
0:52
Off
0:00
Off
POWER ON Function
POWER ON Time
POWER OFF Function
POWER OFF Time
0:00
Press to display the POWER ON Setup/
POWER OFF Setup screen.
Press to select Hours Adjustment/
Minutes Adjustment.
POWER ON Setup
2
3
POWER ON Time
Hours Adjustment
Minutes Adjustment
0 : 52
00
52
Press to adjust each time.
POWER OFF Setup
POWER OFF Time
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
Press to complete POWER ON Time/
POWER OFF Time.
Press to select POWER ON Function/
POWER OFF Function.
Set up TIMER
PRESENT TIME
0:52
On
0:00
On
POWER ON Function
POWER ON Time
POWER OFF Function
POWER OFF Time
Press to select On.
0:00
R
4
Press twice to exit from Setup.
Note:
Timer function will not work unless “PRESENT TIME” is set.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Screensaver (For preventing after-images)
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a Screensaver should be used.
SET UP
1
Press to display the Setup menu screen.
Press to select the Screensaver.
Setup
Component/RGB-in select
2
3
4
RGB
Signal
Screensaver
(
)
OSD Language
English UK
Set up TIMER
Press to select the Screensaver screen.
Reversal / Scroll selection
Screensaver
Press to select the Function.
Function
Mode
Periodic Time
Operating Time
SP Adjustment
White bar scroll
Interval
0:00
Press to select the desired function.
0:00
High
White bar scroll
Image Reversal
White bar scroll : The white bar will scroll from left to right.
Image Reversal : Negative image will be displayed on the screen.
Mode selection
Press to select the Mode.
Screensaver
Function
Mode
Start Time
Finish Time
SP Adjustment
White bar scroll
Time Designation
Press to select each mode items.
Off
0:00
0:00
Mid
Interval : Operates when Periodic Time and Operating Time are setup and those
times arrive.
Time Designation : Operates when Start Time and Finish Time are setup and those
times arrive.
On : Operates when the
(ACTION) is pressed.
If the Mode is at On, the menu screen will disappear and the
Screensaver will be activated.
R
To stop the Screensaver under On, press the button.
After selecting Time Designation or Interval, the relevant Time Setup will become available for selection and the
Operating Time may be set. (Time cannot be set when “Mode” is “on” or “off.”)
Screensaver
Screensaver
Screensaver
Function
Mode
Start Time
Finish Time
SP Adjustment
White bar scroll
Time Designation
Function
Mode
Start Time
Finish Time
SP Adjustment
White bar scroll
Function
Mode
Periodic Time
Operating Time
SP Adjustment
White bar scroll
Interval
0:00
off
0:00
0:00
Mid
0:00
0:00
High
0:00
High
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Screensaver (For preventing after-images )
Setup of Screensaver Time
Press to select Start Time/ Finish
Time (When Time Designation is
selected).
5
Start Time
Press to select Periodic Time/
Operating Time (When Interval is
selected).
Start Ttime
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
Finish Time
Press to select each Time
Adjustment screen.
Finish Time
0 : 00
Hours Adjustment
Minutes Adjustment
00
00
Screensaver
Screensaver
Function
Mode
Start Time
Finish Time
SP Adjustment
White bar scroll
Time Designation
Function
Mode
Periodic Time
Operating Time
SP Adjustment
White bar scroll
Interval
0:00
0:00
0:00
Mid
0:00
High
Periodic Time
Periodic Time
Hours Adjustment
Minutes Adjustment
0:00
00
00
Press to select Hours Adjustment/
Minutes Adjustment.
6
Operating Time
Press to Setup Hours or Minutes.
Operating Time
Hours Adjustment
Minutes Adjustment
0 : 00
00
00
button: Forward
button: Back
Press to store settings.
Note: Timer function will not work unless “PRESENT TIME” is set.
Side Panel Adjustment
Do not display a picture in 4:3 mode for an extended period,
as this can cause an after-image to remain on the side
panels either side of the display field.
side panel
4:3
To prevent the appearance of such an after-image,
illuminate the side panels.
Screen Display
To display the Screensaver screen.
(Refer to the previous page, operation
guide steps 1 and 2.)
1
after-images
Screensaver
Press to select the SP Adjustment.
Press to select Off, Low, Mid, High.
2
Function
Mode
Start Time
Finish Time
SP Adjustment
White bar scroll
Time Designation
0:00
0:00
Mid
Off
Low
Mid
High
R
3
Press to exit from Screensaver.
Notes:
• Setting the side panel to High mode for an extended period may result in occurrence of after-images.
• The side panels may flash (alternate black/white) depending on the picture being shown on the screen. In such an
occurrence, use the Cinema mode.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for Input Signals
Component/RGB-in Select
Select the input signals to be connected by installing the Optional Video Input Card.
(Refer to the service manual for the optional Video Input Card.)
Select to match the signals from the source connected to the Component/RGB input terminals.
Y, PB, PR signals
“Component”
R, G, B, HD, VD signals
“RGB”
1
2
SET UP
Press to display the Setup menu screen.
INPUT
SURROUND
VOL
Press to select the “Component/RGB-in
Select”.
Press to select the desired mode.
N
R
Setup
Component/RGB-in select
RGB
Signal
Screensaver
(
)
OSD Language
English UK
PICTURE
SOUND
SET UP
Set up TIMER
PICTURE
POS. /SIZE
Component
RGB
ASPECT
R
Press to exit from adjust mode.
3D Y/C Filter – For NTSC AV images
Select “Signal” from the “Setup” menu during AV(S Video) input signal
mode. (“Signal [AV]” menu is displayed.)
Setup
Component/RGB-in select
Press to select the “3D Y/C Filter (NTSC)”
RGB
Signal
Screensaver
(
)
OSD Language
Set up TIMER
English UK
Press to set On/Off.
Press
(ACTION) button
[
]
Signal
AV
R
(
)
3D Y/C Filter NTSC
Colour system
3:2 Pulldown
On
Auto
Off
Press to exit from adjust mode.
(
)
Aspect Auto 4:3
4 : 3
Note:
When On, this setting only affects NTSC input signals.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for Input Signals
Colour system / Aspect Auto
Select Signal from the “Setup” menu during AV(S Video) input
signal mode. (“Signal [AV]” menu is displayed.)
Setup
Component/RGB-in select
RGB
Signal
Screensaver
Press to select the “Colour system” or
“Aspect Auto”.
(
)
OSD Language
English UK
Set up TIMER
Press to select each functions.
Press
(ACTION) button
If the picture image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
[
]
Signal
AV
(
)
3D Y/C Filter NTSC
Colour system
3:2 Pulldown
On
Auto
Off
(
)
Aspect Auto 4:3
4 : 3
Mode
Function
Colour system
Set the colour system to match that of the input signal.
If set to “Auto”, the colour system is automatically selected from “PAL”, “SECAM” and
“NTSC”, but not from “M-NTSC”. To view M-NTSC format pictures, you must manually
set to “M-NTSC”.
Auto
PAL
SECAM
M.NTSC
NTSC
Aspect Auto
(4:3)
Set to “4 : 3” to view 4:3 images in an unchanged format when Aspect Auto is selected.
If you would like to view 4:3 images in Just format, set to “Just”.
3:2 Pulldown
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which
are recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
Setup
Select “Signal” from the “Setup” menu during AV(S Video) or Component input
Component/RGB-in select
signal mode.(“Signal [AV]” menu is displayed.)
RGB
Signal
Screensaver
Press to select 3:2 Pulldown.
(
)
OSD Language
Set up TIMER
English UK
Press to set On/Off.
Press
(ACTION) button
[
]
Signal
AV
Note:
(
)
3D Y/C Filter NTSC
Colour system
On
Auto
Off
When On, this setting only affects the following signal input.
• NTSC signal input during “AV(S Video)” input signal mode.
• 525i(480i) signal input during “Component” input signal mode.
3:2 Pulldown
(
)
Aspect Auto 4:3
4 : 3
[
]
Signal
Component
Off
R
Press to exit from adjust mode.
3:2 Pulldown
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup for input signals
Sync
Setup
Select Signal from the “Setup” menu during RGB or PC input signal mode.
Component/RGB-in select
RGB
Signal
Screensaver
Press to adjust.
(
)
OSD Language
Set up TIMER
English UK
Press
(ACTION) button
[
]
Signal
RGB
Sync
H & V
H
-
Freq.
31.5 kHz
60.0 Hz
R
V-
Freq.
Press to exit from adjust mode.
[
]
Signal
Sync
PC
H & V
H
-
Freq.
31.5 kHz
60.0 Hz
V-
Freq.
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input).
Sync
Sync
Sync
H & V
on G
H & V:
on G:
The H and V sync signals are input from the HD/VD connector.
Uses a synchronized signal on the Video G signal, which is input
from the G connector.
on VIDEO: Compatible with the scart plug (Europe)
The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.
on VIDEO
Setting PC sync signal:
Confirm that the input is set to PC input (this setting is valid only for PC input).
H & V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.
Sync
Sync
H & V
on G
H-Freq. (kHz)/V-Freq. (Hz)
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input and PC input.
Display range:
H
-
Freq.
kHz
60.0 Hz
31.5
V-
Freq.
Horizontal 15.5 - 110 kHz
Vertical
48 - 120 Hz
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture
Sound
Electrical Appliances
Cars/Motorcycles
Fluorescent light
Interference
Noisy Sound
Volume
(Check whether the mute function has been
activated on the remote control.)
Normal Picture
No Picture
No Picture
No Colour
No Sound
No Sound
Not plugged into AC outlet
Not switched on
Picture and Brightness/Volume setting
(Check by pressing the power switch or stand-
by button on the remote control.)
If a signal with a non-applicable colour system
format, or frequency is input, only the input
terminal indication is displayed.
Normal Sound
Normal Sound
Colour controls set at minimum level
(see page 24, 25)
Colour system (see page 31)
Plasma Display panel
Symptoms
Check
The plasma display panel is manufactured using an extremely high level of precision
technology, however, sometimes some parts of the screen may be missing picture
elements or have luminous spots. This is not a malfunction.
Some parts of the screen
do not light up.
Do not allow a still picture to be displayed for an extended period, as this can cause
a permanent after-image to remain on the Plasma Display.
Examples of still pictures include logos, video games, computer images, teletext
and images displayed in 4:3 mode.
Note:
After-images appear
The permanent after-image on the Plasma Display resulting from fixed image use
is not an operating defect and as such is not covered by the Warranty.
This product is not designed to display fixed images for extended periods of time.
Whirring sounds can be
heard from the display unit.
The display unit is fitted with a cooling fan to dissipate heat generated during normal
use.The whirring sound is caused by rotation of the fan and is not a malfunction.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connection to the Optional Video Input Card. (IF-C50P1G)
By installing the optional Video Input Card, the Plasma Display can handle high
quality input signals such as AV (S Video), DVD, and RGB.
Below is the connecting method when the optional Video Input Card is installed.
AUDIO
R
L
R
L
AUDIO
IN
S
VIDEO
IN
VIDEO
IN
VIDEO
OUT
HD
AUDIO
VD
PR/CR/R
PB/CB/B
Y/G
AV
COMPONENT/RGB IN
PC IN
SERIAL
AV Terminals
(see page 35, 36)
COMPONENT/RGB IN and Audio IN Terminals
(see page 37)
PC RGB input
AV input signals
horizontal
frequency(kHz)
vertical
frequency(Hz)
signal name
1
2
3
4
5
NTSC
PAL
PAL60
15.734
15.625
15.734
15.625
15.734
59.95
50
59.95
50
SECAM
Modified NTSC
Mark:
∗
59.95
Input signal can be displayed.
Component /RGB/PC input signals
horizontal
frequency(kHz)
vertical
frequency(Hz)
signal name
Component
RGB
PC
1
2
3
4
5
6
7
8
525 (480) /60i
625 (575) /50i
525 (480) /60p
625 (575) /50p
750 (720) /60p
15.734
15.625
31.468
31.25
45
33.75
28.125
27
59.94
50
59.94
50
60
60
50
24
48
70
59.94
67
75
60
60
75
85
75
60
70
75
85
75
60
75
85
60
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
1,125 (1,080) /60i
1,125 (1,080) /50i
1,125 (1,080) /24p
1,125 (1,080) /24sF
640 × 400 @70
9
27
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
31.5
31.5
35
640 × 480 @60
Macintosh13” (640 × 480)
640 × 480 @75
37.5
31.7
37.9
46.9
53.7
49.7
48.4
56.5
60
68.7
68.7
64
80
91.1
75
852 × 480 @60
800 × 600 @60
800 × 600 @75
800 × 600 @85
Macintosh16” (832 × 624)
1,024 × 768 @60
1,024 × 768 @70
1,024 × 768 @75
1,024 × 768 @85
Macintosh21” (1,152 × 870)
1,280 × 1,024 @60
1,280 × 1,024 @75
1,280 × 1,024 @85
1,600 × 1,200 @60
Notes:
After installing the Optional Video Input Card, the Setup menu screen on the Plasma Display will change. (The input
signal cables should be connected to the relevant terminals).
• The input signals that may be selected by the INPUT button will change.
• The required mode, either "Component" or "RGB" and "AV" will be available for selection.
• On the Setup menu screen, the setting contents under Signal will change.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
AV Input Terminals connection
Connect the signal source equipment.
(Example) When connecting an S VIDEO VCR.
(S VIDEO VCR)
Audio
OUT
Video
OUT
S
OUT
Video
R
L
S VIDEO 4 pin socket
Luminance earth
Chrominance earth
2×RCA audio
cables
Luminance in
Chrominance in
AUDIO
S VIDEO
Video input to
S VIDEO
socket
Audio input to
L/R sockets
R
L
VIDEO
OUT
AUDIO
IN
S
VIDEO
IN
VIDEO
IN
AV
VIDEO signal connection
(VCR)
Audio
OUT
Video
OUT
R
L
Video input to
BNC socket
VIDEO
RCA-BNC video cable
AUDIO
2×RCA audio cables
Audio input to
L/R sockets
(VCR)
R
L
VIDEO
OUT
AUDIO
IN
S
VIDEO
IN
VIDEO
IN
Audio
OUT
Video
OUT
AV
R
L
Video input to
BNC socket
VIDEO
RCA video cable
RCA-BNC adapter plug
AUDIO
2×RCA audio cables
Audio input to L/R sockets
Notes:
(1) The S Video input will override the composite video signal when S Video lead is connected.
(2) Additional equipment and cables shown are not supplied with this set.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
(Example) When connecting 21 pin scart cables.
(VCR)
AV2
Video input to
BNC socket
Audio input to
L/R sockets
(DVD / Satellite Receiver)
R
L
VIDEO
OUT
AUDIO
IN
S
VIDEO
IN
VIDEO
IN
AV
AV1/TV
Video input to
BNC socket
RCA-BNC
adapter plug
Audio input to
L/R sockets
Notes:
(1) Additional equipment, cables and an adaptor plug shown are not supplied with this set.
(2) 21 pin connectors and 21 pin scart plugs are connectors used in Europe.
AV Out
MONITOR DEVICE
BNC cable
R
L
VIDEO
OUT
AUDIO
IN
S
VIDEO
IN
VIDEO
IN
AV
(Example) colour CRT monitor
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Component/RGB Input connection
Component signals (Y, PB, PR) connection
RCA-BNC
adaptor plug
(DVD Player)
Y
Y, PB, PR
P
B
R
3×RCA
video cables
P
L
AUDIO
R
2×RCA
audio cables
R
L
AUDIO
VD
HD
P
R/CR/R
P
B/CB/B
Y/G
COMPONENT/RGB IN
Notes:
(1) Change the “Component/RGB-in” setting in the “Setup” menu to “Component”. (see page 30)
(2) Additional equipment, cables and adaptor plugs shown are not supplied with this set.
RGB signal (R, G, B, HD, VD) connection
Example of input signal source
HDTV-compatible VCR
5×BNC
RGB cables
RGB input to
R, G, B, HD, VD
sockets
RGB camera
R
L
PR/CR/R
PB/CB/B
VD
HD
Y/G
AUDIO
COMPONENT/RGB IN
Audio input to
L/R sockets
AUDIO
2×RCA audio cables
RCA-BNC
adaptor-plug
Computer
VD
HD
R
B
G
Notes:
(1) Change the “Component/RGB-in” setting in the “Setup” menu to “RGB”. (see page 30)
(2) Additional equipment, cables and adaptor plugs shown are not supplied with this set.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GD-V501PCE
Power Source
220 - 240 V AC, 50Hz/60Hz
Power Consumption
Normal use
495 W
3.0 W
1.7 W
Stand-by condition
Power off condition
Plasma Display panel
Drive method AC type
50-inch, 16:9 aspect ratio
3000:1
Contrast Ratio
Screen size
1,106 mm (W) × 622 mm (H) × 1,269 mm (diagonal)
No. of pixels
1,049,088 (1,366 (W) × 768 (H)) [4,098 × 768 dots]
Operating condition
Temperature
0 °C - 40 °C
Humidity
20 % - 80 %
Applicable signals
Colour System
NTSC, PAL, PAL60, SECAM, Modified NTSC
Scanning format
525i (480i), 625i (575i), 525p (480p), 625p (575p), 750p (720p), 1,125/60i, 50i,
24p, 24sF (1,080/60i, 50i, 24p, 24sF) ······ SMPTE 274M
XGA display
PC signals
VGA, SVGA, XGA
SXGA, UXGA ······ (compressed)
Horizontal scanning frequency 15.5 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
PC
(HIGH-DENSITY D-SUB 15PIN)
AUDIO IN (M3JACK)
R,G,B/0.7 Vp-p (75-ohm)
HD, VD/1.0 - 5.0 Vp-p (high impedance)
0.5 Vrms (high impedance)
SERIAL
EXTERNAL CONTROL TERMINAL (D-SUB9PIN) RS-232C COMPATIBLE
16W [8 W + 8 W] (10 % THD)
SPEAKERS (6 Ω)
For TS-C5000SPG only
Accessories Supplied
Remote Control Transmitter
Batteries
EUR646526
2 × R6 Size
× 2
Fixing bands
Ferrite core
small size × 1
large size × 2
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
GD-V501PCE
Optional Supplied
Speakers
Stand Unit
Video Input Card
TS-C5000SPG
TS-C50P1G
IF-C50P1G
Wall Mounting Unit
Wall Mounting Unit
(angled)
TS-C50P6G
TS-C50P2G
Ceiling Suspension Unit
TS-C50P3G
Dimensions
1,210mm × 724 mm × 98 mm
(W × H × D)
98 mm
1,210 mm
POWER
/
INPUT
–
VOL
+
R
G
-
STANDBY
P
O
W
E
R
O
N
approx. 42.5 kg net (main unit only)
approx. 47.1 kg (with speakers)
Mass (Weight)
Notes:
(1) Design and specifications are subject to change without notice. Weight and dimensions shown are approximate.
(2) This equipment complies with the EMC standards listed below.
EN55022, EN61000-3-2, EN61000-3-3, EN61000-6-2.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Japan
TQZW243
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|