JVC Computer Hardware PC Connection Kit User Manual

For Windows^®

PC CONNECTION KIT

ENGLISH

JLIP VIDEO CAPTURE/

JLIP VIDEO PRODUCER

For Customer Use:

Enter below the Model No. and Serial

No. Retain this information for future

reference.

INSTRUCTIONS

Model No.

Serial No.

LYT0500-002A

Download from Www.Somanuals.com. All Manuals Search And Download.

COPYING AN IMAGE

Copying an image into the clipboard ...................................................... 28

Pasting an image from the clipboard...................................................... 28

EDITING AN IMAGE

CREATING AN HTML ALBUM

Saving images in HTML format............................................................. 30

Viewing the HTML album .................................................................... 30

TROUBLESHOOTING

31 – 32

JLIP VIDEO PRODUCER SOFTWARE

SECTION^{.................................................................}33 – 54

STARTING AND EXITING JLIP VIDEO PRODUCER

34 – 35

Starting JLIP Video Producer ............................................................... 34

Exiting JLIP Video Producer ................................................................. 34

Initializing JLIP Devices ...................................................................... 35

JLIP VIDEO PRODUCER WINDOW BUTTONS

AND DISPLAYS

BASIC OPERATIONS

36 – 40

41 – 50

Operating the video source unit............................................................ 41

Setting in/out points ......................................................................... 41

Playing back one programmed scene...................................................... 42

Playing back all programmed scenes...................................................... 42

Dubbing .......................................................................................... 43

Selecting a P.AE/Effect ....................................................................... 44

Selecting a Fade/Wipe Effect............................................................... 44

P.AE/Effect and Fade/Wipe Effect buttons.............................................. 45

Saving the program list ...................................................................... 46

Opening a saved file .......................................................................... 47

Overwriting a file ............................................................................. 47

Correcting and cutting programmed counter data ...................................... 48

ADVANCED OPERATIONS

51 – 52

Changing the ID number...................................................................... 51

Connecting another device during operation ............................................ 51

Adjusting the gap between stored In/Out points on the PC

and dubbed ones on the recorder .......................................................... 52

TROUBLESHOOTING

53 – 54

INDEX

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

JLIP VIDEO CAPTURE

SOFTWARE SECTION

You can find the latest information (in English)

on the provided software program at our World

Wide Web Server.

http://www.jvc-victo r .co.jp/english/index-e.html

Download from Www.Somanuals.com. All Manuals Search And Download.

STARTING JLIP VIDEO CAPTURE

Starting JLIP Video Capture

Turn on your PC and start up Windows^®.

Click Start on the task bar.

2 _{• The Program menu appears on the screen.}

Move the mouse pointer over JLIP Video Capture and click to start the program.

3 _{• JLIP Video Capture starts up.}

NOTE

• Close any other programs running on the PC.

• Disable any programs that run in the background, such as screen savers, e-mail applica-

tions, virus checkers, schedulers, etc.

• Turn off file and printer sharing.

CAUTION

• Do not disconnect the video source unit or turn it off while JLIP Video Capture is running.

HOW TO CLOSE THE PROGRAM

Click the Close button or select File — Exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIALIZATION

SELECTING THE CONNECTED DEVICE

You can use the JLIP Devices window to select a video source unit connected to one of the

COM ports (RS-232C) after starting up JLIP Video Capture, or when you connect a different

video source unit.

Select Window — DV Controller in the

Index window.

• The JLIP Devices window opens.

• You can also select Preferences —

Devices in the DV Controller window

to open the JLIP Devices window.

Select the Serial Port (COM 1 to COM 4).

• Select the COM port the video source

unit is connected to.

Click Scan.

• When the connected video source unit is detected, its name appears in the window.

Select the Picture Transfer Rate.

• Set it to 115200.

• Depending on your PC’s specifications, the software may not function properly when

this speed is selected. If an error occurs during use, set it to a slower rate (38400 or

less).

Click OK.

• The DV Controller window appears after setting is completed.

NOTE

If the video source unit is not detected, follow the procedures below.

1 Confirmed that the COM port the video source unit is connected to is selected in the JLIP

Devices window.

2 Check the connections.

3 Set the video source unit’s Power Dial to PLAY or PLAY/PC.

4 Click Scan in the JLIP Devices window.

5 If the video source unit appears in the window, click OK (setting is completed).

CAUTION

• If you are using a built-in modem or IrDA, the RS-232C COM port may be occupied. In

this case, click the right button of the mouse to select My Computer, then select Properties

— System Properties — Device Manager. Click Ports (COM & LPT) to confirm which

COM port is available. If all the COM ports are occupied, set the COM port used by the

modem or IrDA driver to Invalid.

• If a USB or Digital Still Camera driver is installed on your PC, you may not be able to use

the RS-232C port.

• Depending on your PC’s specifications, you may need to change the BIOS settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

JLIP VIDEO CAPTURE WINDOWS

INDEX WINDOW

Index images are displayed as an album in the Index window.

1 Toolbar

2 Index display section

Open button

The captured images are displayed in this

section.

Opens an album file or image file.

3 Index image

Save Album button

Saves images in the Index window

as an album file.

Each index image consists of a thumbnail

image and its time code.

NOTE

DV Controller button

• Each toolbar button function can also be

performed from the menu bar.

• To hide the toolbar, select View —

Toolbar.

Opens the DV Controller window

for control of the connected video

source unit from your PC.

Image Viewer button

Opens the Image Viewer window

and displays the captured image at

full size.

CAUTION

• The DV Controller window closes automatically when a slide show is started, or when

Edit — Open Editor or Edit — Copy in Image Viewer is selected.

• When using the Forward/Reverse Frame Advance buttons to control a video source unit

that has no Frame Playback function, the video source unit will initiate slow playback for a

few seconds, then stop. On some video source units, each frame advance may not be the

exact length of a proper frame.

• The DV Controller window may not correspond to the status of the video source unit if a

remote control unit is used to control it.

Download from Www.Somanuals.com. All Manuals Search And Download.

DV CONTROLLER WINDOW

Select Window — DV Controller in the Index window to open the DV Controller window.

This window is used to capture still images from a video source unit.

1 Counter Indicator (Time Code)

3 Operation Buttons

The video source unit’s time code is

displayed here.

Power button

Displays the power status of the

connected video source unit. Note

that, depending on the video deck

connected, it may not be possible

to turn its power on and off.

2 Operation Buttons for Video Source

Unit

Rewind

Play

Fast Forward

Capture button

Captures the desired playback

image.

Reverse Slow Pause Forward Slow

Reverse Frame

Advance

Stop Forward Frame

Advance

Automatic Capture button

Controls the playback of the video

source unit and captures specified

playback images.

CAUTION

• Use only the operation buttons in the DV Controller window to control the video source

unit. If you operate the video source unit with its own operation buttons, the appearance

of the DV Controller window may not correspond to the status of the video source unit, or

it may cause a malfunction to occur in JLIP Video Capture.

• The DV Controller window may appear to still be operating the video source unit even

after the videocassette automatically stops at the beginning or end of the tape. In this case,

click the Stop button in the DV Controller window before performing another operation.

• If an image is captured in the Pause or Slow Play mode, some noise may appear on the

captured image. In this case, capture the image during normal playback.

• If videotape being used is damaged, some noise may appear in the playback image in the

DV Controller window.

• Automatic Capture cannot be performed in the time code range of 00:00:00:00 and

00:00:30:00 in the DV Controller window.

• Depending on your PC’s or video source unit’s specifications, the DV Controller window

may not function.

Download from Www.Somanuals.com. All Manuals Search And Download.

JLIP VIDEO CAPTURE WINDOWS (cont.)

IMAGE VIEWER WINDOW

Select Window — Image Viewer in the Index window to open the Image Viewer window.

This window is used to display images at full size, and to present images in an album as a slide

show.

Toolbar

Close button

Stop button

Next Image button

Previous Image button

Slide Show button

First Image button

Last Image button

Control window

NOTE

• Each toolbar button function can also be performed from the menu bar.

• Clicking the right mouse button in the Image Viewer window brings up a menu of the

toolbar functions.

• Select Window — Button to display a small Control window containing the toolbar

buttons.

• To hide the toolbar, select View — Toolbar.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC IMAGE CAPTURE

This section describes basic image capture operations. For more detailed instructions, see

pages 13-15.

Set up your equipment.

• If using a video camera, insert a

videocassette into it.

• Connect the video source unit to your

PC, and turn both on.

• Start up JLIP Video Capture.

(see page 6)

Start playback.

• Click Window — DV Controller to

open the DV Controller window.

• Click the Play button in the DV

Controller window.

Capture the desired image.

• Click the Capture button when the

image you want to capture appears.

The image data will be transferred to

your PC.

• When you are finished, click the Stop

button and close the DV Controller

window.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC IMAGE CAPTURE (cont.)

View the image in the Image Viewer

window.

• Double-click the thumbnail image in

the Index window.

• The image is displayed in the Image

Viewer window at its captured size.

• Click the Image Viewer window’s

Close button to return to the Index

window.

Save the image on your PC’s hard drive.

• Click on the thumbnail image in the

Index window to select it, then click

File — Save Image As. For more

details, refer to the Windows^®95/98

manual or your computer’s manual.

• Enter a file name for the image and

click Save.

Alternatively, you can save multiple

images as an album.

• Click File — Save Album As from the

Index window.

• Enter a file name for the album and

click Save.

You can also modify or use images in

various ways.

• You can create an HTML album of

images using JLIP Video Capture. (see

page 30)

NOTE

• The following characters cannot be used in file names:

\ / : * ? ” < >

• You can save ^limages in JPEG, Bitmap (BMP) or DVF format. (see pages 20-22)

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED CAPTURE FUNCTIONS

IMPORTED IMAGE

Squeeze/Cinema

You can select Squeeze or Cinema when adding wide-screen images (with an aspect ratio of

16:9) to an album.

Squeeze

Squeezes the image’s

aspect ratio from 16:9

to 4:3.

Cinema

Inserts a black or white

mask at the top and

bottom of the image to

convert its aspect ratio

to 4:3.

Image Size Preferences

Click Preferences — Imported Image in the Index

window.

Select Squeeze or Cinema in Wide Image Format.

Click OK.

Mask Color (Black/White)

You can select the mask color when adding images whose aspect ratio is not 4:3 (except when

Squeeze is selected in Wide Image Format) to an album.

Black

White

Mask Color Preferences

Click Preferences — Imported Image in the Index

window.

Select Black or White in Mask Color.

Click OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED CAPTURE FUNCTIONS (cont.)

AUTOMATIC CAPTURE

You can capture images automatically according to your preferences.

Automatic Capture cannot be performed in the time code range of 00:00:00:00 and

00:00:30:00.

Automatic Capture Preferences

Click the Play button in the DV

Controller window.

Click the Automatic Capture button.

CAUTION

• Depending your PC’s specifications and operating environment, the points where images

are captured may not match what was set in the preferences.

• During automatic capture, do not move the DV Controller window, change its size,

operate its scroll bars or access the menu, otherwise it may cause the points where images

are captured to not match what was set in the preferences.

• If the videotape is damaged, the points where images are captured may not match what

was set in the preferences.

• Automatic capture may not function properly if portions of the videotape are unrecorded.

Go To Time Code

You can specify the precise time code at which to capture an image. This function is useful for

capturing images next to ones already captured.

Select Go To Time Code in the

Automatic Capture window.

Select the hour, minute, second and

frame to go to.

Click Execute.

Download from Www.Somanuals.com. All Manuals Search And Download.

Interval

You can capture images at specified intervals. This function is useful for summarizing the

contents of a tape, or for watching time-lapse movies using the slide show.

Select Interval in the Automatic Capture

1 _window.

Select the number of images to be

2 _captured.

Select the length of the interval (in

3 _{minutes and seconds).}

Click Execute.

CAUTION

• Automatic capture stops when the number of images in the Index window reaches 99 or

the videotape ends.

• This function doesn’t work if there is no time code recorded on the videotape, or if the

recording time is shorter than 1 minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIEWING IMAGES

SLIDE SHOW

Slide Show Preferences

You can select the display interval during a slide show.

Select Preferences — Image Viewer

from the Image Viewer window.

Make sure the Set Minimum box is

unchecked, and select the interval (in

seconds) between images.

• Check the Set Minimum box when

you want to display images one after

another quickly.

• You can select from 0 to 30 seconds.

The actual interval is equal to the sum

of the selected time plus the time it

takes your PC to load and display the

images.

Click OK.

Slide Show Operation

You can view images in the Index window as a slide show.

Click the Slide Show button in the Image

Viewer window, or select View — Slide

Show.

• The slide show starts.

To stop the slide show, click the image

currently being displayed, or click the

Stop button in the Image Viewer

window.

• The slide show stops automatically

when a menu is accessed or a button

is clicked.

NOTE

• You can also start up the slide show by clicking the right mouse button in the Image Viewer

window to bring up a menu of the toolbar functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMAGE CORRECTION

Select Preferences — Image Viewer in

the Image Viewer window.

When displaying images captured from

a fast action sequence, select Movement

in Image Correction.

• Images in the displayed album will be

corrected for camera shake.

• To use less memory, select Field.

• To use no image correction, select

None.

DISPLAY SIZE

You can select between normal and full-screen display.

For full-screen display, select View —

Size — Full Screen in the Image Viewer

window.

• For normal display, select View —

Size — Normal.

CAUTION

• When your monitor resolution is 640 x 480 pixels, Full Screen cannot be selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

VIEWING IMAGES (cont.)

IMAGE VIEWER APPEARANCE

You can toggle the display of the border (window frame and menu bar) and toolbar in the

Image Viewer window.

Hiding the Border

Select View — Border in the Image

Viewer window to uncheck it. The

window frame and menu bar disappear.

• You can toggle the border display by

clicking the right mouse button in the

Image Viewer window to bring up the

View menu.

Hiding the Toolbar

Select View — Toolbar in the Image

Viewer window to uncheck it. The

toolbar disappears and a small Control

window containing the toolbar buttons

appears.

• Perform this step again to make the

toolbar reappear.

• You can also toggle the toolbar display

by clicking the right mouse button in

the Image Viewer window to bring up

the View menu.

• You can also select Window — Button

in the Image Viewer window to make

the Control window containing the

toolbar buttons appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

SELECTING A BACKGROUND COLOR

You can select the background color in the Index window.

Select Preferences — Background Color

in the Index window or Image Viewer

window.

Select the desired background color.

Click OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING THE IMAGE FORMAT

You can select JPEG, Bitmap (BMP) or DVF format for saving images, and adjust their settings.

JPEG Preferences

JPEG images are saved with a high compression rate, making them ideal for Internet web pages.

Select Preferences — Save Image in the

Index window or Image Viewer window.

Select JPEG in Image Format.

Select an image size in Image Size.

• If the video footage was shot in the

wide-screen mode, the image width is

greater than in the standard mode.

Image width in the widescreen mode

is shown in brackets.

Select the JPEG image quality using the

JPEG Quality slider.

Select the type of image correction to

use by selecting either None, Movement

or Field in Image Correction.

• Movement: Image blur caused by

camera shake is corrected.

• Field: Saves images to the hard drive

faster than when Movement is

selected.

You can preview your settings by

clicking Preview. When you are

finished, click OK.

Save images as desired. (see pages 12

and 23)

NOTE

• Moving the JPEG Quality slider to the right lowers the compression rate, resulting in higher

image quality and increased file size. Moving the JPEG Quality slider to the left raises the

compression rate, resulting in lower image quality and decreased file size.

• By using compression, you can fit more images onto a floppy disk, hard disk, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Bitmap Preferences

Bitmap (BMP) is the standard format used by Windows^®, and is supported by many software

applications.

Select Preferences — Save Image in the

Index window or Image Viewer window.

Select Bitmap in Image Format.

Select an image size in Image Size.

• If the video footage was shot in the

wide-screen mode, the image width is

greater than in the standard mode.

Image width in the widescreen mode

is shown in brackets.

Select the number of colors in Bitmap

Colors.

Select the type of image correction to

use by selecting either None, Movement

or Field in Image Correction.

• Movement: Image blur caused by

camera shake is corrected.

• Field: Saves images to the hard drive

faster than when Movement is

selected.

You can preview your settings by

clicking Preview. When you are

finished, click OK.

Save images as desired. (see pages 12

and 23)

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING THE IMAGE FORMAT (cont.)

DVF Preferences

DVF is the native format for storing still images from digital videotape. DVF images are saved

without changing the data, so there is no loss of quality.

Select Preferences — Save Image in the

Index window or Image Viewer window.

Select DVF in Image Format.

Click OK.

Save images as desired. (see pages 12

and 23)

Download from Www.Somanuals.com. All Manuals Search And Download.

SAVING AN IMAGE

SAVING INDEX IMAGES

You can save index images separately from their album file. Before saving an image, set the

desired image format and preferences. (see pages 20-22)

Click the desired index image in the

Index window.

• To select multiple index images, hold

down the Ctrl key and click each

index image that you wish to save.

• To select multiple sequential index

images, click the first index image.

Then, hold down the Shift key and

click the last index image that you

wish to save.

Select File — Save Image As.

Enter a file name and click Save.

• If you click Yes when asked “Save all

images with this default name?”, an

ID number will be appended to the

selected default name.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAVING AN IMAGE (cont.)

SAVING IMAGES IN THE IMAGE VIEWER WINDOW

Select File — Save Image As in the

Image Viewer window.

Enter a file name and click Save.

ADDING IMAGE FILES TO THE INDEX WINDOW

You can add JPEG, Bitmap (BMP) and DVF images to the Index window.

• To add images to the Index window directly from a video source unit, see page 11.

Select File — Open.

Select the desired image format in the

Files of type field.

Select the desired file and click Open.

• You can select several files at a time.

NOTE

• You can also drag & drop images into the Index window from folders or Windows Explorer.

For more details, refer to the Windows^®95/98 manual or your computer’s manual.

• When a JPEG or BMP image is added to the Index window, no time code is displayed.

• When any-sized JPEG or BMP image is added to the Index window, it is automatically

resized to 720 x 480 (NTSC*¹) or 720 x 576 (PAL*²) pixels.

• An image whose aspect ratio is not 4:3 will be automatically resized to 4:3 when it is added

to the Index window or saved.

*1: NTSC (National Television System Committee) is the video system used mainly in North

America and Japan.

*2: PAL (Phase Alternation by Line) is the video system used mainly in Western Europe and

Asia.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAVING IMAGES AS AN ALBUM

You can save the images in the Index window as an album.

To create a new album, click the Save

Album button on the toolbar in the

Index window.

Enter the desired file name and click

Save.

• To save a modified album, select File

— Save Album.

COPYING AN INDEX IMAGE

You can copy images within the Index window.

Click the image you wish to copy.

While holding down the Ctrl key, click

and hold down the left mouse button on

the index image you wish to copy, then

drag it to the desired position.

Download from Www.Somanuals.com. All Manuals Search And Download.

DELETING AN INDEX IMAGE

You can delete images in the Index window.

Click the image you wish to

delete.

• To select multiple index images, hold

down the Ctrl key and click each

index image that you wish to delete.

• To select multiple sequential index

images, click the first index image.

Then, hold down the Shift key and

click the last index image that you

wish to save.

Select Edit — Delete.

• Alternatively, you can press the Del

key.

At the Delete (number) Image(s)?

prompt, click Yes.

MOVING AN INDEX IMAGE

You can move images within the Index window.

Click the image you wish to move.

Click and hold down the left mouse

button on the index image you wish to

move, then drag it to the desired

position.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDING IMAGES TO AN ALBUM

You can add images to an album by capturing them from a video source unit or by importing

them from your PC’s hard disk (JPEG/Bitmap/DVF).

To capture images from a video source

unit...

Open the album you wish to add images

to, then capture the desired images (see

pages 11, 14-15).

To import images from your PC’s hard

disk...

Drag the desired image files to the Index

window. Each file is added to the end of

the index.

NOTE

• When a JPEG or Bitmap image is added

to the Index window, no time code is

displayed.

• When a JPEG or Bitmap image is added

to the Index window, it is automatically

resized to 720 x 480 (NTSC) or 768 x

576 (PAL) pixels.

Download from Www.Somanuals.com. All Manuals Search And Download.

COPYING AN IMAGE

COPYING AN IMAGE INTO THE CLIPBOARD

You can copy an image displayed in the Image Viewer window into the clipboard for use in

another application.

Select Edit — Copy.

• Alternatively, you can press Ctrl-C.

NOTE

• Image data copied into the clipboard is resized to 640 x 480 (standard) or 848 x 480

(wide) pixels.

PASTING AN IMAGE FROM THE CLIPBOARD

You can paste an image from the clipboard into another application.

In the desired application (such as an

image editing program), press Ctrl-V to

paste the image from the clipboard.

• For more details, refer to the applica-

tion’s instructions.

NOTE

• This function may not work if too many images are displayed on-screen at a time.

• Image data copied into the clipboard is resized to 640 x 480 (standard) or 848 x 480

(wide) pixels.

• Close JLIP Video Capture after loading the other application. If both programs are running

at the same time, your PC may become unstable due to heavy memory consumption.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING AN IMAGE

You can load an external image editor application to modify an image. Before using this

function, an image editor application must be installed.

Select Edit — Open Editor in the Image

Viewer window.

CAUTION

• Refer to the image editor application’s instructions for details about its operation.

• The most recently installed image editor application starts up when Open Editor is

selected. If you wish to link to a different image editor application, refer to Help in Windows^®.

• This function uses linking to load the proper application. Depending on the settings on

your PC however, a different application may load instead.

• Select the image format to be used in Preferences — Save Image.

• If DVF format is selected, this function is unavailable. Select JPEG or Bitmap in

Preferences — Save Image to use this function.

• Close JLIP Video Capture after loading the other application. If both programs are running

at the same time, your PC may become unstable due to heavy memory consumption.

Download from Www.Somanuals.com. All Manuals Search And Download.

CREATING AN HTML ALBUM

You can save images in the Index window as an HTML album, which can then be viewed

using an Internet browser.

SAVING IMAGES IN HTML FORMAT

Select the images you would like to save

in the Index window. (see page 23)

• If no index images are selected, all of

them will be saved as an HTML

album.

Select File — Make HTML Album.

Enter a name for the HTML file and click

Save.

Enter a title for the HTML album in the

Title Input field and click OK.

• An HTML file and a folder containing

the individual images are saved. The

HTML file and folder use the same

name.

CAUTION

• Images saved in an HTML album are converted to JPEG format with a quality of 75.

• The background color of the HTML album is the same as that of the Index window when it

is set to Default or User Defined.

• JLIP Video Capture cannot open an HTML album.

• When moving an HTML file and folder, make sure they are kept in the same place relative

to each other. The HTML file uses a relative directory path to load the images.

VIEWING THE HTML ALBUM

Select File — Open HTML Album to

open the HTML album in an Internet

browser.

• HTML albums may also be posted on

the Internet as web pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Problem

Cause

Page

The connected video source

unit cannot be detected.

The COM port cannot be

set.

• Confirm that your video source unit is

connected to the AC adapter correctly.

6, 7

• Confirm that the cable is connected to your

PC and video source unit correctly.

• Turn on the power of the video source unit

before starting up JLIP Video Capture.

• If it is still not detected after clicking Scan in

the JLIP Devices window two or three times,

try turning off your PC and video source unit.

Confirm the connection between them then

turn them both back on.

• Confirm that the JLIP Devices window is

operating properly after clicking Scan.

• If you are using a built-in modem or IrDA,

the RS-232C COM port may be occupied. In

this case, click the right button of the mouse

to select My Computer, then select

Properties — System Properties — Device

Manager. Click Ports (COM & LPT) to

confirm which COM port is available. If all

the COM ports are occupied, set the COM

port used by the modem or IrDA driver to

Invalid.

• If a USB or Digital Still Camera driver is

installed on your PC, you may not be able to

use the RS-232C port.

• Depending on your PC’s specifications, you

may need to change the BIOS settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTNG (cont.)

Problem

Cause

Page

Automatic capture does not

function correctly.

• This function may not operate correctly

sometimes depending on your PC’s

specifications and operating environment.

6, 9, 11,14

• This may occur if you move the DV

Controller window, operate its scroll bars or

perform a file operation while capturing

images.

• This may occur if correct data is not being

transmitted due to damage on the videotape.

• This may occur if a tape recorded in the LP

mode is played back on a different video

source unit. Play videotapes using the video

source unit they were recorded on.

• There may be software running in the

background. Confirm that there are no

programs running in the background that

may be using the processor at the same time

as JLIP Video Capture.

NOTE

When using a laptop PC, operation may be interrupted by a warning when the battery is

nearly exhausted.

• If there is software which monitors the status of the battery running in the StartUp folder...

Close the application, or delete/move its icon from the StartUp folder and reboot your PC.

• If you are using your PC’s power management function...

Click the right button to select My Computer, then select Properties —

System Properties — Device Manager — System Devices — Advanced Power Manage-

ment Support. Follow the appropriate procedure below.

For Windows^®95, click Settings and deselect Enable power management support (the check

mark (

) next to it disappears).

For Windows^®98, select Disable in this hardware profile (a check mark (

) appears next to it).

Download from Www.Somanuals.com. All Manuals Search And Download.

JLIP VIDEO PRODUCER

SOFTWARE SECTION

You can find the latest information (in English)

on the provided software program at our World

Wide Web Server.

http://www.jvc-victo r .co.jp/english/index-e.html

Download from Www.Somanuals.com. All Manuals Search And Download.

STARTING AND EXITING JLIP VIDEO PRODUCER

Starting JLIP Video Producer

Connect the video source unit to the PC

1 _{using the JLIP connection cable, then}

turn the video source unit on.

Turn on your PC and start up Windows^®.

Click Start on the task bar.

•The Program menu appears on the

screen.

Move the mouse pointer over JLIP

4 _{VIDEO PRODUCER and click to start the}

program.

•JLIP Video Producer starts up.

NOTES:

• Exit all other software applications before

starting JLIP Video Producer.

• Suspend the operation of any other

software applications that periodically start

at a given interval or time. (This includes

screen savers, e-mail software,

communications software, virus checkers,

schedulers and so on.)

• Cancel network settings for any printers or

folders on harddisks that are connected to

or built into the PC and that are being

shared over a network.

• Do not plug or unplug the PC connection

cable or turn off power to video equipment

while using Video Producer as doing so

may cause the PC to malfunction.

Exiting JLIP Video Producer

Select File — Exit on the JLIP Video

1 _{Producer window. When the}

confirmation screen appears, click Yes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initializing JLIP Devices

Select Preferences — JLIP Devices.

1 _{Select the serial port to which the device}

is connected and click Scan.

Select the player to be used by clicking

2 _{on it in the listbox and then click Select.}

•You do not need to perform the

operation in step 2 when only one

player is connected.

Select the recorder deck to be used by

3 _{clicking on it in the listbox and then}

click Select.

•Select Use Edit Terminal on the screen

when using a JVC Video deck that has a

remote pause terminal but no JLIP

terminal or a deck from another

manufacturer.

Click OK.

Listbox

Download from Www.Somanuals.com. All Manuals Search And Download.

_ENJLIP VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS

JLIP VIDEO PRODUCER WINDOW

CONTROLLER

)

(

%$#

Download from Www.Somanuals.com. All Manuals Search And Download.

1 P.AE/Effect buttons

8 Tape counter display

• Selects one of the 5 P.AE/Effects

available per programmed scene.

• To cancel the selected effect, click the

EC (Effect Clear) button.

• Displays the current tape position.

ex.

00:

01:

45:

(Hours : Minutes : Seconds : Frames)

• The digital camera’s counter uses a

drop-frame system.

2 Fade/Wipe Effect buttons

• Selects one of the 7 Picture Wipes or 10

Fades/Wipes available per scene

transition.

9 Close button

• Close the controller window.

• To cancel the selected effect, click the

TC (Transition Clear) button.

0 Edit buttons

3 Elapsed Time

• Displays the total elapsed time of all the

programmed scenes.

A B

4 Button for Opening the Controller

Window

• Displays the controller.

• Can be displayed even when selecting

the menu Window — Controller.

A. Edit Standby button

• The player is put into Pause mode for

the Syncro Edit pre-roll time already set

on the Options dialog box (see

page 52).

5 Program list

• Displays the following setting

information beginning from the left:

Scene number, In point, P.AE/Effect, Out

point, Fade/Wipe Effect, Duration Time

Counter, and Memo.

• This button is used when VCRs not

compatible with this editing system and

performing manual editing.

• This button cannot be clicked when the

counter reads less than 00:00:30:00.

• This button cannot be clicked when the

player is not paused.

• Up to 99 programs can be set per file for

scenes specified by an In and Out point.

6 ID number

B. Syncro Edit button

• Displays the video source unit’s ID

number.

• After going into Playback-Pause mode at

the In point of the recorder and player,

clicking this button rewinds both decks

by the pre-roll amount and executes the

first event.

• An ID number can be clicked to display

the JLIP Devices dialog box as well as

when switching the serial port or

performing JLIP devices scanning.

• Since no Out point is specified, the

Syncro Edit is stopped using Stop.

• This button cannot be clicked when the

counter reads less than 00:00:30:00.

• This button cannot be clicked when the

player is not paused.

7 Edit Indicator

• In Normal mode, the deck being

operated is displayed in green.

• In Edit mode, both deck indicators light

(Player: Green, Recorder: Red) and an

arrow also lights.

C. Select Player/Recorder button

• Selects the deck to be operated. The

player is forcibly selected when no

recorder is connected to the JLIP.

• This button cannot be clicked when

there is no JLIP recording equipment.

• The recorder lights red between the In

point and Out point while the recorder

is actually recording.

• Clicking on either deck selects the one

to be operated.

Download from Www.Somanuals.com. All Manuals Search And Download.

JLIP VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS (cont.)

! Jog/Shuttle

@ Tape Operation buttons

• These buttons operate the video camera

and recorder.

Jog/Shuttle Operation buttons

Click these buttons to perform Jog/Shuttle

operations.

• For slow playback, click Pause and then

Slow.

• For frame advance playback, click

Pause and then Frame Advance.

• A lock lid is attached to the Record

button. This lid must be clicked to open

before using it.

Jog Dial Select button

Jog Dial mode is

selected when the

inner ring is lit.

B C D E

Shuttle Dial Select button

Shuttle Dial mode is selected when the outer

ring is lit.

Jog Dial Lamp (Inner lamp)/Jog Dial

• Jog Dial mode is selected when the jog

dial lamp is lit by clicking with the

mouse.

• It is possible to advance frames by

clicking with the mouse on the left

(reverse) or right (forward) arrows.

• The deck can be operated at this time

using the number keys.

I H G F

A. Recording button

B. Reverse Frame Advance button

C. Pause button

D. Forward Frame Advance button

E. Forward Slow button

F. Stop button

Shuttle Lamp (Outer ring)/Shuttle Ring

• Shuttle mode is selected when the

shuttle dial lamp is lit by clicking with

the mouse.

G. Fast Forward/Fast Forward Search

button

H. Playback button

• Slow Playback, Playback, and Fast

Forward Playback depending on the left

(reverse) or right (forward) arrows that

are clicked.

• The deck can be operated at this time

using the number keys.

I. Rewind/Rewind Search button

J. Eject button

K. Reverse Slow button

# Review button

• This button operates the recorder to

playback video after editing. Only one

event is played back when using Syncro

Edit, while all programs are played back

when Auto Edit has been executed.

• This button does not function when the

recorder is not connected to the JLIP.

• This button cannot be clicked when not

even one Auto Edit has been executed

since startup.

PC's Ten-key assignments for Jog/Shuttle

[2]: Playback

[4]: Frame reverse

[6]: Frame advance

[8]: Jog/Shuttle Select & Pause

[•]: Stop

[2]: Playback

[4]: Accelerates one level in the rewind

direction, or decelerates one level in

the fast forward direction.

[6]: Accelerates one level in the fast

forward direction, or decelerates one

level in the rewind direction.

[8]: Jog/Shuttle Select & Pause

[•]: Stop

Download from Www.Somanuals.com. All Manuals Search And Download.

A. In Point button

$ Preview button

• This button selects the time code for the

In point and displays it in red.

• Fine modification of the time code

for the In point can be done using

Trim+/–.

• Clicking Goto after this button causes

the deck to automatically locate the In

point and puts the deck in Playback-

Pause mode.

• Playback the video from the In point to

Out point specified for a program.

• Recording does not result from clicking

this button.

• The PC emits a sound when the

application is started and exited.

• When using a camera that includes

transition functions such as wipe, the

area before the In point and after Out

point appears masked. This allows

accurate confirmation of the video

location to be edited. (This operation is

not possible with some models.)

• This button cannot be clicked when

several scenes are selected.

• This button cannot be clicked when

several scenes have been selected.

B. Out Point button

• This button selects the time code for the

Out point and displays it in red.

• Fine modification of the time code for

the Out point can be done using

Trim+/–.

% Goto button

• Clicking this button causes the deck to

automatically locate the time code

specified in the program list (In point)

and puts the deck in Playback-Pause

mode.

• This button cannot be clicked when

several scenes have been selected.

C. Trim buttons

These buttons are used to make fine

modifications to the time code of the In

point and Out point specified for the

program.

• Only the player can be operated.

^ Auto Edit button

• Playback all scenes in order of Scene

number.

Trim+: Increases time data by one frame.

Trim–: Decreases time data by one frame.

• Since a lock lid is usually attached, click

this button only after opening the lid by

clicking.

• Editing automatically starts once the

recorder is connected and put into

Pause mode.

• This button cannot be clicked when an

In point or Out point is not selected.

D. Modify Edit Points button

This button is used when making fine

modifications to the scene in the program

list currently selected.

& Program Modification button

When making fine modifications to a

program, the In point and Out point are

specified using this button after the Scene

number is specified using the Program Select

buttons. Various fine modifications are made

with Trim+/–.

• It is also possible to open the Modify

Edit Points dialog box and make fine

modifications to In point, Out point,

tape change and memo.

• The Modify Edit Points dialog box can

also be opened by double clicking on

the Scene number.

• This button cannot be clicked when

several scenes have been selected.

A B C

Download from Www.Somanuals.com. All Manuals Search And Download.

JLIP VIDEO PRODUCER WINDOW BUTTONS AND DISPLAYS (cont.)

* Entry button

Editing Method when Using an Editing

This button is used to enter the current

counter value for the In point and then Out

point each time it is clicked.

Deck other than JLIP

1. Locate the In point using the player

connected to the JLIP and put it in

Playback-Pause mode.

• This button is for specifying the In point

and Out point for each scene.

2. Click Edit Standby.

• Clicking Entry after clicking a button

other than Bottom of Scene of the

Program Select buttons will add a new

program to the next number after the

current position. The Scene number for

programs beyond the current one are

each increased by one and pushed

toward the back.

3. Locate the In point of the recorder being

operated by other than JLIP and put it in

Record-Pause mode.

4. Simultaneously press the Playback button

of the player and the Recording Start

button of the recorder.

5. Stop recording once the Out point of the

player has been passed.

• This button cannot be clicked when the

counter reads less than 00:00:30:00.

Please see the instruction manual for the

recorder for details on how to put a deck into

Recording-Pause mode.

( Program Select buttons

Program selection is also possible by clicking

on a Scene number in the program list.

B C

NOTE:

If you need the JLIP Video Producer Help

window, select Help — Contents.

A. Bottom of Scene button

• Clicking this button instantly moves the

selected position in the program list to

the end of the list.

• This is useful when there are many

programs.

B. Next Scene button

• This button moves the selected position

in the program down by one.

C. Previous Scene button

• This button moves the selected position

in the program up by one.

) Scene Number

• This displays the currently selected

number in the program list.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS

Operating the video source unit

Set the video source unit to the Play

1 _{mode and insert a recorded tape.}

ᮣ

Click

•The playback picture appears on the TV

monitor.

Setting in/out points

To set In/Out points, click Entry at the

1 _{beginning and end of the scene you want}

to dub.

Entry

•Set In/Out points so that the Out point

comes after the In point.

•If a scene has no Out point, program

playback and dubbing will be disabled

for that scene.

•If you set In point at the beginning of

the tape or if you set Out point at the

end of the tape, editing may not

function properly. If this happens,

change previously registered In/Out

points slightly and try setting them

again.

•The counters of digital video cameras

cannot be reset.

•In points must have a counter value of

00:00:30:00 or later.

•Some values cannot be set due to drop-

frame counters.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS (cont.)

Playing back one programmed scene

Click on the line where the In/Out points

1 _{you want to preview are displayed to}

highlight that line.

Click Preview.

2 _{•The video source unit locates the scene}

Preview

by going to a point prior to the In point,

then starts playback at the In point.

Playback stops after the Out point is

passed.

Playing back all programmed scenes

Click Auto Edit.

1 _{•The video source unit plays back}

scenes in numerical order and stops

immediately after the last scene’s Out

point.

Auto Edit

NOTES:

• If Preview or Auto Edit is clicked at the end

of the tape, the video source unit will not

function properly.

• If the source tape has any blank portions on

it, scenes will not be edited properly.

• If using a VCR with JLIP terminal as a

recording device, click Auto Edit without

inserting a video cassette.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dubbing

You can record all programmed scenes onto

a tape in the recorder.

Make sure there is an erase protection

1 _{tab on the tape. Insert it into the}

recording deck and set the recording

deck to the Record-Pause mode.

Click Auto Edit.

2 _{When editing stops, the video source}

unit enters the Stop mode and the

recording deck enters the Record-Pause

mode.

•When "Tape Change" occurs during

dubbing, editing will stop and a

message requesting tape change will

appear. Change the tape and click OK.

Stop the recorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS (cont.)

Selecting a P.AE/Effect

There are 5 P.AE/Effects available to spice up

programmed scenes. You can select only one

effect per programmed scene.

Click on the scene where you want to

1 _{use a P.AE/Effect.}

Click the desired P.AE/Effect button. The

2 _{selected effect indication is displayed to}

the right of the In point.

To cancel the selected P.AE/Effect . . .

Click on the scene which has the effect

you want to cancel, then click the EC

(Effect Clear) button.

NOTE:

If you use the Sepia or Monotone P.AE/

Effects, you cannot use the Dissolve or Black

& White Fader Fade/Wipe Effects.

Selecting a Fade/Wipe Effect

There are 17 Fades/Wipes available for scene

transitions.

Click on the scene where you want to

1 _{use a Fade/Wipe.}

Click the desired Fade/Wipe Effect

2 _button.

The selected effect indication is dis-

played to the right of the Out point.

•The Fade/Wipe is executed between the

selected scene (the one clicked) and

the following one.

To set a Fade/Wipe Effect at the editing

start point . . .

Click scene 00 or the tape changing

scene, and then select the desired Fade/

Wipe Effect.

To cancel the selected Fade/Wipe

Effect . . .

Click on the scene which has the effect

you want to cancel, then click the TC

(Transition Clear) button.

NOTE:

Fade/Wipe Effects using video images cannot

be set for scene 00 or tape changing scenes.

Download from Www.Somanuals.com. All Manuals Search And Download.

P.AE/Effect and Fade/Wipe Effect buttons

P.AE/Effect buttons

Fade/Wipe Effect buttons

SEPIA

MOSAIC FADER

Recorded scenes have a brownish tint

like old photos. Combine this with the

Cinema mode for a classic look.

Fade in or out with a mosaic effect.

DOOR WIPE

Wipe in as the two halves of a black

screen open to the left and right,

revealing the scene, or wipe out and

the black screen reappears from left

and right to cover the scene.

VIDEO ECHO

Adds a “ghost” to the subject, giving

your recording a “fantasy” feeling.

STROBE

Your recording looks like a series of

consecutive snapshots.

SCROLL WIPE

The scene wipes in from the bottom to

the top of a black screen, or wipes out

from top to bottom, leaving a black

screen.

CLASSIC FILM

Gives recorded scenes a strobe effect.

MONOTONE

Like classic black and white films, your

footage is shot in B/W. Used together

with the Wide Cinema function, it

enhances the “classic film” effect.

SHUTTER WIPE

Wipe in toward the center of a black

screen from the top and bottom, or

wipe out from the center toward the

top and bottom, leaving a black

screen.

EFFECT CLEAR

Cancels the selected P.AE/Effect.

CORNER WIPE

The new scene wipes in over the

previous one from the upper right

corner to the lower left corner.

Fade/Wipe Effect buttons

WHITE FADER

WINDOW WIPE

Fade in or out with a white screen.

The next scene gradually wipes in from

the center of the screen toward the

corners, covering the previous scene.

BLACK FADER

Fade in or out with a black screen.

SLIDE WIPE

CORNER WIPE

The next scene gradually wipes in over

the previous one from right to left.

Wipe in on a black screen from the

upper right to the lower left corner, or

wipe out from lower left to upper right,

leaving a black screen.

DISSOLVE

The new scene gradually appears as

the old one gradually disappears.

WINDOW WIPE

DOOR WIPE

The scene starts in the center of a

black screen and wipes in toward the

corners, or comes in from the corners,

gradually wiping out to the center.

The previous scene wipes out from the

center to the right and left, like a door

being pushed open to reveal the next

scene.

SLIDE WIPE

The next scene gradually wipes in over

the previous one from right to left.

SCROLL WIPE

The new scene wipes in over the last

one from the bottom of the screen to

the top.

BLACK & WHITE FADER

Fade in to a color screen from a black

and white screen, or fade out from

color to black and white.

SHUTTER WIPE

The new scene wipes in over the

previous one from the center toward

the top and bottom of the screen.

TRANSITION CLEAR

Cancels the selected Fade/Wipe effect.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS (cont.)

Saving the program list

Select File — Save As.

1 _{•The Save As dialog box appears.}

Enter a file name in the File name field.

2 _{•The extension .vpd will be appended to}

the file name. ex.: travel.vpd

Click Save to save the program list as a

3 _file.

NOTES:

• The programmed scene information that is

saved includes only counter readings at In/

Out points, Fade/Wipe Effects, P.AE/Effects,

Duration Time, and Memo.

• Images are not saved.

• Refer to Dubbing on page 43 for recording

and saving the video image on the video

cassette.

• The following characters cannot be used in

the file name: \ / : * ? ” < >

• Up to 99 programs can be registered in a

single file.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening a saved file

Opening a file saved on floppy disk

Select File — Open.

1 _{•The Open dialog box appears.}

Insert the floppy disk into the drive.

Saved file names appear in the File name

2 _{field. Click on the file name you want so}

that it appears in the field below.

ᮢ

Click in DRIVE to select the floppy

2 _drive.

Click Open to load the file.

Follow steps 2 and 3 in Opening a saved

3 _{•The JLIP Video Producer window}

3 _{file on the left.}

returns.

Overwriting a file

Saving a program using the same name as a previously saved program overwrites that file.

After opening a file and modifying counter data (see page 48), select File — Save Album.

1 _{The file is overwritten and saved.}

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS (cont.)

Correcting and cutting programmed counter data

Correcting program counter data

Double click on the line of the scene you

1 _{want to modify.}

OR . . .

Select the line to be modified and click

Modify Edit Points on the controller.

•The Modify Edit Points dialog box will

appear allowing the In point, Out

point, memo or tape change to be

changed.

ᮡᮢ

Click

, or enter the desired numbers

2 _{from the keyboard, and then click OK.}

NOTES:

• The Modify Edit Points dialog box can be

displayed by selecting Modify Edit Points

by clicking with the right mouse button.

• Click the Memo field when you want to

enter text in the Memo field.

Modifying the Length of a Scene

Modify by increasing or decreasing the

3 _{time code one frame at a time by}

clicking Trim+ or Trim–.

Select the scene by clicking the Program

1 _{Select buttons on the controller.}

(You can also select the scene by

clicking on the line of the desired scene.)

NOTE:

Click In point or Out point on the

2 _{controller and select the time code you}

want to modify.

This makes simple modifications convenient

without having to constantly bring up the

Modify Edit Points dialog box.

Cutting a scene

Click on the scene you want to cut.

Select Edit — Delete.

•The message "Delete 1 Scene(s)?"

appears.

To cut the scene, click Yes.

NOTE:

A scene can be deleted by selecting Delete

by clicking with the right mouse button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding a scene

Click the scene you want to add and

1 _{select Edit — Add — Scene.}

Enter the In and Out points you want to

2 _{set, refering to Corrrecting program}

counter data on the page to the left.

Dubbing onto one tape using two or

more tapes

Click the scene at which the tape is to be

1 _{changed and select Edit — Add —}

Change Tape.

OR . . .

Double click the scene you want to

modify to display the Modify Edit Points

dialog box and then put a check mark

next to Change Tape.

NOTE:

No In or Out point is displayed for the scene

at which the tape is to be changed.

Note that it is also possible to clearly mark

tape change by entering a comment such as

“tape change” in the memo field.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATIONS (cont.)

Cutting all programmed scenes

Select Edit — Select All.

Select Edit — Delete.

2 _{•The message "Delete (number)}

Scene(s)?" appears.

To cut all the scenes, click Yes.

NOTE:

All scenes can be deleted by selecting Delete

by clicking with the right mouse button.

Copying a programmed scene to

another position

Click on the scene you want to copy.

Select Edit — Copy.

Click on the scene number you want to

3 _paste.

Select Edit — Paste.

NOTES:

• It is not possible to paste scene 00.

• Copy — Paste operations are possible by

clicking with the right mouse button.

Transferring a programmed scene to

another position

Click on the scene you want to transfer

1 _{and select Edit — Cut.}

Click on the scene number you want to

2 _paste.

Select Edit — Paste.

NOTE:

Cut — Paste operations are possible by

clicking with the right mouse button.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED OPERATIONS

Changing the ID number

You can change the ID number of the connected unit.

The default ID number is 06.

To display the JLIP Devices dialog box, select Preferences — JLIP Devices.

After selecting the number in the listbox, right-click the mouse to select Change ID, and

2 _{then change the number and press the Return key.}

NOTES:

• Access the Instruction Manual for the

connected deck for details on changing the

ID number of a deck.

• Do not enter an ID number of 00 because

JLIP Video Producer does not recognize

ID 00.

• When two or more video cameras (or video

decks) are connected, be sure to change

the ID number for the connected deck so

that there is no duplication of ID numbers.

Connecting another device during operation

When connecting another device during operation, initializing is necessary to confirm the

connected devices. (It is not necessary to run JLIP Video Producer from the beginning again.)

Follow steps 1 – 4 in Initializing JLIP Devices on page 35.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADVANCED OPERATIONS (cont.)

Adjusting the gap between stored In/Out points on the PC and dubbed ones on

the recorder

During dubbing, the beginning of the scene stored on the PC may be missed, or the scene

prior to the transition you chose for the In/Out points may be dubbed onto the recorder.

When this occurs, adjust the gap for more accurate editing.

After dubbing (see page 43), play back

1 _{the dubbed scene to check the In/Out}

point timing.

Select Preferences — Options on the

2 _{JLIP Video Producer Window to bring up}

the Options dialog box.

To set the In point or Out point, enter the

3 _{numeric value or click}

ᮡᮢ

To adjust the In point timing, enter a new

value from 0 Frame to –200 Frame.

In point

: when the scene starts too

early, enter a smaller value

than the present value.

: when the scene starts too

late, enter a larger value

than the present value.

In point

•The default setting is –33 Frame.

•Click Default to return settings to

factory defaults.

To adjust the Out point timing, enter a

new value from 0 Frame to –200 Frame.

Out point : when the scene ends too

late, enter a larger value

than the present value.

Out point : when the scene ends too

early, enter a smaller value

than the present value.

•The default setting is –8 Frame.

•Click Default to return settings to

factory defaults.

Click OK.

4 _{•The new value is stored on the PC.}

To check the corrected In/Out point

5 _{timing, dub the stored scenes and play}

them back.

NOTE:

Even if the In/Out point timing is adjusted,

there may still be a slight margin between

adjusted In/Out points and those of the

dubbed scenes.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

SYMPTOM

TYPICAL SITUATION

Cannot select serial port

ⅷ Sometimes the RS-232C port cannot be used because

the PC’s COM ports have all been assigned to internal

modems, IrDA or other devices. To check port usage,

right click on My Computer on the desktop, select

Properties, click on the Device Manager tab, and look

under the item Ports. If no ports are open, disable one

of the modems, IrDA drivers or other devices to free up

a COM port.

ⅷ It may not be possible to use the RS-232C depending

on the USB and digital still camera being used.

ⅷ The BIOS may need to be set depending on the PC

model in question.

ⅷ Check that the correct serial port number is set.

ⅷ Check that the JLIP device is turned on.

ⅷ Check that the correct connections for the JLIP device

have been made.

ⅷ Check that you have not mistaken the editing cable for

the JLIP cable used for connections.

JLIP device is not detected

ⅷ If two or more JLIP devices are used, check that the

JLIP ID numbers being used do not conflict with each

other.

Cannot control digital video

camera using the controller

ⅷ Check that "Player" has been selected on the JLIP

Devices dialog box.

Cannot control recorder using

the controller

ⅷ Check that "Recorder" has been selected on the JLIP

Devices dialog box.

ⅷ Only video decks having JLIP terminals can be used.

ⅷ Depending on the video deck’s specifications, it may

not be capable of some functions such as slow, search,

frame advance, and reverse playback. Please refer to

the instruction manual for the specifications of the

video deck in question.

Cannot select P.AE/Effect or

Fade/Wipe Effect

ⅷ Some combinations of P.AE/Effect and Fade/Wipe

Effect cannot be selected at the same time. Select

another type of P.AE/Effect or Fade/Wipe Effect.

ⅷ Fade/Wipe Effects that use video images cannot be set

for scene 00, the bottom of the scene, tape changing

scenes or a scene before the tape change.

Auto Edit operation stops

ⅷ Check that no other application software is running.

ⅷ This type of symptom occurs when the correct data is

not being sent from the digital video camera due to

damage to the tape being played.

ⅷ This type of symptom may arise when a tape recorded

in LP mode is played back using a different digital

video camera.

ⅷ Check that the tape in the recorder has its erase

protection switch.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING (cont.)

SYMPTOM

TYPICAL SITUATION

The video deck does not

function

ⅷ When the video deck is in Remote Pause mode or is

being controlled by remote control, be sure to put the

video deck in Record Pause mode before starting Auto

Edit.

ⅷ When the video deck is in Remote Pause mode or is

being controlled by remote control, check that "Use

Edit Terminal" has been selected on the JLIP Devices

dialog box.

ⅷ When the video deck is being controlled by the

remote control of the digital video camera, set the

brand code of the remote control of the digital video

camera, corresponding to the video deck being used.

ⅷ When the video deck is being controlled by JLIP,

check on the JLIP Devices dialog box that "Recorder"

has been set and that "Use Edit Terminal" has not been

set.

ⅷ Check that you have not mistaken the editing cable for

the JLIP cable used for connections.

Selected P.AE/Effect or Wipe/

Fade Effect does not function

ⅷ Some functions may not be available depending on

the video deck's specifications. Please refer to the

instruction manual for the specifications of the video

deck in question.

ⅷ Check that the Out point setting actually corresponds

Auto Edit function does not

end

to a counter value on the tape being used.

Edit point is displaced

ⅷ If the displacement is always by the same amount:

Change the value of "Rec Pause Time Correction"

found under the menu Preferences — Options (See

p. 52).

ⅷ If the displacement varies:

This may be due to a small mechanical displacement

caused by imprecision in the operation of the video

deck itself.

Video/audio from the digital

video camera is not recorded

ⅷ Check the A/V cord connections.

ⅷ Set the video deck for external input.

ⅷ First check that the video and audio from the digital

camera appears on the TV connected to the video

deck, and then execute Auto Edit.

Unwanted items such as time,

date and time code are

displayed

ⅷ Clear the display by changing the settings of the digital

video camera.

Color of the display of the

PC's monitor is strange

ⅷ The color cannot be displayed properly on monitors

having less than 256 colors capability.

The actual appearance of the application software may differ from that illustrated in this

manual, depending on the operating environment of your PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

Adding a scene ........................................ ੬ pg. 49

Adding images to an album ......................੬ pg. 27

Automatic Capture ....................................੬ pg. 14

Automatic Capture button ......................੬ pg. 9,14

Last Image button ......................................੬ pg. 10

Mask color ................................................ ੬ pg. 13

Memo ........................................... ੬ pg. 36, 37, 48

Modifying the length of a scene ................ ੬ pg. 48

Movement (Image Correction) ....... ੬ pg. 17, 20, 21

Background Color .....................................੬ pg. 19

BMP (Bitmap) ..........................੬ pg. 12, 21, 24, 29

Border .......................................................੬ pg. 18

Next Image button ....................................੬ pg. 10

Capture button ...................................... ੬ pg. 9, 11

Clipboard ..................................................੬ pg. 28

Connecting another device .......................੬ pg. 51

Control window ........................................੬ pg. 10

Copying a programmed scene ................... ੬ pg. 50

Correcting program counter data ..............੬ pg. 48

Counter display ...................................੬ pg. 36, 37

Counter indicator ........................................੬ pg. 9

Cutting all programmed scenes .................੬ pg. 50

Cutting a scene .........................................੬ pg. 48

Open a program list .................................. ੬ pg. 47

Open button ...............................................੬ pg. 8

Operating the video source unit ................ ੬ pg. 41

Operation buttons for video source unit ......੬ pg. 9

Open Editor menu ....................................੬ pg. 29

Overwriting a file ......................................੬ pg. 47

P.AE/Effect buttons................... ੬ pg. 36, 37, 44, 45

Play button ..................................... ੬ pg. 9, 11, 14

Playing back all programmed scenes ........੬ pg. 42

Playing back one programmed scene ........੬ pg. 42

Power button ..............................................੬ pg. 9

Previous Image button ............................... ੬ pg.10

Dubbing ...................................................੬ pg. 43

Dubbing onto one tape using two

or more tapes ............................................੬ pg. 49

DV Controller button ..................................੬ pg. 8

DV Controller window............................ ੬ pg. 8, 9

DVF ..............................................੬ pg. 12, 22, 29

Record timing ........................................... ੬ pg. 52

Reverse Frame Advance button ...............੬ pg. 8, 9

Elapsed Time ....................................... ੬ pg. 36, 37

Exit (Close) ............................................ ੬ pg. 6, 34

Save Album button ................................੬ pg. 8, 47

Saving the program list.............................. ੬ pg. 46

Serial port .................................................੬ pg. 35

Setting in/out points .................................. ੬ pg. 41

Slide Show ................................................ ੬ pg. 16

Slide Show button ...............................੬ pg. 10, 16

Stop button ............................... ੬ pg. 9, 10, 11, 16

Fade/Wipe Effect buttons .........੬ pg. 36, 37, 44, 45

Field (Image Correction) ................ ੬ pg. 17, 20, 21

First Image button .....................................੬ pg. 10

Forward Frame Advance button .............. ੬ pg. 8, 9

Full Screen ................................................ ੬ pg. 17

Time Code .................................................. ੬ pg. 9

Toolbar ........................................... ੬ pg. 8, 10, 18

Help menu ................................................ ੬ pg. 40

HTML format ...................................... ੬ pg. 12, 30

Video Producer control buttons......... ੬ pg. 36 – 40

Video source unit operation

ID Change ................................................ ੬ pg. 51

Image Correction ......................................੬ pg. 17

Image Viewer button ...................................੬ pg. 8

Image Viewer window .............................. ੬ pg. 10

Imported Image .........................................੬ pg. 13

Index display section ..................................੬ pg. 8

Index image ................................................ ੬ pg. 8

Index window .............................................੬ pg. 8

buttons.............................................. ੬ pg. 36 – 40

Video source unit selection ....................... ੬ pg. 35

Wide Image Format...................................੬ pg. 13

JLIP Initialization ................................... ੬ pg. 7, 35

JPEG ................................. ੬ pg. 12, 20, 24, 29, 30

JPEG Quality Slider ...................................੬ pg. 20

Download from Www.Somanuals.com. All Manuals Search And Download.

VICTOR COMPANY OF JAPAN, LIMITED

¹^P²^ri⁹ⁿ⁹^te^M^d^Nⁱⁿ^V*^Ja^I^p^D^a*^nSN

U/E

Download from Www.Somanuals.com. All Manuals Search And Download.

Insignia MP3 Player NS DA2G User Manual
Intel Telephone DG33TL User Manual
iSi North America Gas Grill ADV8 User Manual
JVC Camcorder GR AX970 User Manual
JVC CRT Television PD Z35DV4 User Manual
JVC VCR HR DD855EK User Manual
Kalorik Sander PPG 36584 User Manual
Kettler Indoor Furnishings 2533 User Manual
KitchenAid Dishwasher KPDJ630Y User Manual
KitchenAid Oven KBHS109SSS00 User Manual