JVC Computer Drive LYT1155 001A User Manual

ENGLISH  
SOFTWARE INSTALLATION AND  
USB/i.LINK CONNECTION GUIDE  
LYT1155-001A  
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD.  
Printed in Japan  
0403-FO-ID-VP  
M3D8  
This document explains the basic information such as system requirements, installation and connections, etc.  
for the provided software.  
For details on the operation, refer to the software instruction manual included on the CD-ROM in PDF format.  
CAUTION:  
Operate this equipment according to the operating procedures described in this manual.  
Use only the provided CD-ROM. Never use any other CD-ROM to run this software.  
Do not attempt to modify this software.  
Changes or modifications not approved by JVC could void user’s authority to operate the equipment.  
How to handle a CD-ROM  
Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything  
or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft  
cloth outward from the center hole using a circular motion.  
Do not use conventional disc cleaners or cleaning spray.  
Do not bend the CD-ROM or touch its mirror surface.  
Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct sunlight.  
You can find the latest information (in English) on the provided software program at our world wide web  
— 1 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Requirements  
For copying still image files to a PC  
The following requirements must be satisfied to connect the camcorder to a PC using the USB cable, and to  
copy still image files from the memory card in the camcorder.  
OS  
: Windows® XP Home Edition (pre-installed)  
Windows® XP Professional (pre-installed)  
Connector  
: USB connector  
For using HD Capture Utility, MPEG Edit StudioTM Pro LE, ImageMixer DVD  
The following requirements must be satisfied to connect the camcorder to a PC using an i.LINK cable, to  
import MPEG-format video stream, and to edit video clips on a PC.  
OS  
: Windows® XP Home Edition (pre-installed)  
Windows® XP Professional (pre-installed)  
CPU  
RAM  
: Intel Pentium® 4 (2 GHz or faster)  
256 MB (DDR SDRAM or DRD RAM) or more  
384 MB or more if the main RAM is used for the video memory  
(512 MB recommended)  
Hard disk drive  
Connector  
: UltraATA100 (7200 rpm or faster recommended)  
: IEEE1394 (i.LINK) connector  
: 1024 x 768 or greater  
Display  
Video memory  
: 32 MB or more  
For creating a DVD Video  
In addition to the system requirements above, a DVD recording drive which is compatible with  
ImageMixer DVD is required. (DVD-RAM disc is not supported by ImageMixer DVD.)  
For details on compatible DVD recording drives, visit the web site of Pixela Corporation.  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
— 3 —  
For holding a video conference over the Internet  
The following requirements must be satisfied to use a camcorder as a web camera for video conference over  
the Internet.  
Hardware  
OS  
: Windows® XP Home Edition (pre-installed)  
Windows® XP Professional (pre-installed)  
Connector  
: USB connector  
Software  
Windows® Messenger Ver4.6 or later is required. If an old version is installed, download and install the  
latest version from the web site of Microsoft Corporation.  
Miscellaneous  
Internet access and an e-mail address are required.  
You can also find the latest information (in English) at our world web site.  
NOTES:  
Some functions may not work properly depending on the PC environment.  
If your counter party uses Windows® NetMeeting®, you cannot communicate using Windows® Messenger.  
Use Windows® NetMeeting® 3.0 or later.  
If you are using a dial-up router or a broadband router, refer to the router’s instruction manual.  
If you are using a firewall or a router with the dial-up connection, it is not possible to connect to the Internet  
properly.  
Consult your Internet service provider whether Windows® Messenger can be used or not.  
The quality of images or sound during video conference may differ depending on the condition of Internet  
access.  
The system requirements information is not a guarantee that the provided software will work on all personal  
computers meeting those requirements.  
Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries.  
Other product and company names included in this instruction manual are trademarks and/or registered  
trademarks of their respective holders.  
— 4 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software Installation  
Follow the procedure described below to install the software. From the [Setup] dialog box in step 3, you can  
install the following software.  
HD Capture Utility  
This application is used to import MPEG-format video stream from a camcorder, or to export the edited video  
clip back to the camcorder.  
Audio converter  
This application is used to convert audio files into different format. You can add background music or audio  
effect to the video clip. This application is installed automatically when installing HD Capture Utility.  
MPEG Edit StudioTM Pro LE  
This application is used to edit MPEG-format video clips.  
The provided MPEG Edit StudioTM Pro LE is an application with limited functions and some setting items  
cannot be selected.  
ImageMixer DVD  
This application is used to create a DVD Video.  
Adobe® Acrobat® Reader 5.0  
This application is used to read PDF files.  
1
Load the provided CD-ROM in the PC.  
After a moment, the [Important Notice] dialog box appears.  
If the [Important Notice] dialog box does not appear, click [My Computer] from the [Start] menu and  
then double-click the CD-ROM icon.  
2
3
Confirm the contents, and then click [Next].  
After a moment, the [Setup] dialog box appears.  
From the [Setup] dialog box, you can install the desired software.  
Click [Install] on the right side of the desired software.  
The installation of the selected software starts.  
The procedure differs depending on the software. Follow the on-  
screen instructions to complete the installation.  
Following steps are the example of HD Capture Utility.  
4
In the [Choose Setup Language] dialog box, select [English],  
and then click [OK].  
The [InstallShield Wizard] dialog box appears.  
5
6
Click [Next].  
The [Welcome to the installation wizard for capture utility] dialog  
box appears.  
Click [Yes].  
The [License Agreement] dialog box appears.  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
— 5 —  
 
7
8
Click [Next].  
The [Customer Information] dialog box appears.  
Input your information in all boxes, and then click [Next].  
If you do not input your information in all boxes, you cannot click  
[Next].  
When you are a personal user, input any letters in the [Company  
Name] box.  
The [Choose Destination Location] dialog box appears.  
9
Click [Next].  
The installation begins.  
10Click [Next].  
After a moment, the [Install Shield Wizard Complete] dialog box  
appears.  
11Click [Finish].  
Repeat the procedure to install other software.  
Note on installing MPEG Edit StudioTM Pro LE  
Enter the serial number which is printed on the label on the CD-ROM case.  
When entering the serial number, consider the case (upper or lower) and difference between number and  
alphabet.  
NOTES:  
The software instruction manual is included on the CD-ROM in PDF format. Double-click the [JVC] folder  
and then double-click the [Docs] folder. Open the “Start.pdf” file and click the button of the desired  
language. Note that Adobe® Acrobat® Reader must be installed to read PDF files.  
For details on how to use Windows® Messenger, refer to “VIDEO CONFERENCE OVER THE INTERNET” in  
the software instruction manual on the CD-ROM.  
If you perform installation of a software that is already installed, uninstallation will start. In this case,  
perform the installation again after uninstallation is finished.  
CONTINUED ON NEXT PAGE  
— 6 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Use the USB cable or i.LINK cable to connect the camcorder to a PC.  
For the operation on the camcorder, refer to the camcorder’s instruction manuals.  
USB connection  
Enables you to copy still image files in a memory card to a PC or to use the camcorder as a web camera for  
video conference over the Internet.  
To USB connector  
USB cable  
(provided)  
PC  
To USB  
To copy still image files to a PC  
1
2
3
Make sure that there is a memory card in the camcorder.  
Set the camcorder’s Playback Mode Switch to “MEMORY”.  
Set the camcorder’s Power Switch to “P” while pressing down the Lock Button located  
on the switch.  
The camcorder turns on.  
4
Connect the camcorder to the PC with a USB cable.  
On the camcorders LCD monitor [USB MODE] appears.  
To use the camcorder as a web camera and hold a videoconference over the Internet  
1
2
Set the camcorder’s Recording Mode Switch to “MEMORY”.  
Set the camcorder’s Power Switch to “A” or “M” while pressing down the Lock Button  
located on the switch.  
The camcorder turns on.  
3
Connect the camcorder to the PC with a USB cable.  
The “  
” indicator appears on the camcorders LCD monitor.  
When connecting an USB cable for the first time, the [Found New Hardware Wizard] dialog box  
appears. (pg. 10 “Installing the drivers for using the camcorder as a web camera”)  
For details on holding a video conference over the Internet, refer to the software instruction manual on  
the CD-ROM.  
CONTINUED ON NEXT PAGE  
— 7 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
i.LINK connection  
Enables you to import MPEG-format video stream to the PC (or export edited video clip to the camcorder).  
To i.LINK connector  
(optional: VC-VDV204 or VC-VDV206)  
PC  
To i.LINK IN/OUT  
1
Set the camcorder’s Power Switch to “P” while pressing down the Lock Button located  
on the switch.  
The camcorder turns on.  
2
3
4
Set [i.LINK OUT] to [SW] in the camcorder’s system setting menu.  
Set the camcorder’s output mode select switch to [MPEG2].  
Connect the camcorder to the PC with an i.LINK cable.  
When connecting an i.LINK cable for the first time, the [Found New Hardware Wizard] dialog box  
appears. (pg. 9 “Installing the driver for importing MPEG-format video stream”)  
NOTES:  
It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack.  
Do not turn on or off the camcorder or switch the playback mode on the camcorder when the USB cable is  
connected.  
If you connect the camcorder to the PC through a USB hub, compatibility issues between the hub and the  
PC may result in instability in the operation of the PC. If this happens, connect the camcorder directly to the  
PC, not through the hub.  
Do not use an extension USB cable.  
Never disconnect the USB cable while the message [ACCESSING FILES] appears on the camcorder’s LCD  
monitor.  
— 8 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Driver Installation  
Installing the driver for importing MPEG-format video stream  
When you connect the camcorder to the PC with an i.LINK cable at first time, the driver is installed.  
1
2
3
4
5
6
Click [Install from a list or specific location (Advanced)] and then click [Next].  
The driver search dialog box appears.  
Click [Don’t search. I will choose the driver to install], and then click [Next].  
The [Hardware Update Wizard] dialog box appears.  
Click [Sound, video and game controllers], and then click [Next].  
The dialog box to select the manufacture and model appears.  
Click [JVC] for manufacture and [JVC Tape Device] for model, and then click [Next].  
The [Update Driver Warning] dialog box appears. If not, go to step 6.  
Click [Yes].  
The [Completing Found New Hardware Wizard] dialog box appears.  
Click [Finish].  
CONTINUED ON NEXT PAGE  
— 9 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing the drivers for using the camcorder as a web camera  
When you connect the camcorder to the PC with a USB cable at first time, four drivers are installed in  
succession.  
NOTE:  
Click [Continue Anyway] when the message [Has not passed Windows Logo testing] appears. Be sure not to  
select [Stop Installation]. If you do so, the drivers will not be installed correctly.  
1
2
3
Load the provided CD-ROM in the PC.  
If the [Important Notice] dialog box appears, click [Next] and then [Quit] to close the dialog box.  
Click [Install from a list or specific location (Advanced)] and then click [Next].  
The driver search dialog box appears.  
Click the next three items in the order below.  
A [Search for the best driver in these location]  
B [Include this location in the search]  
C [Browse]  
4
5
6
7
8
Double-click the CD-ROM drive icon and the [XP] folder, and then click [OK].  
The driver search dialog box appears.  
Click [Next].  
The warning message appears.  
Click [Continue Anyway].  
After a moment, the [Found New Hardware Wizard] dialog box appears.  
Click [Finish].  
After a moment, the [Found New Hardware Wizard] dialog box appears again.  
Repeat steps 2 to 7 until the [Found New Hardware Wizard] dialog box does not appear.  
After you repeat steps 2 to 7 four times, the installation is completed.  
— 10 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Viewing the Contents of a Memory Card  
1
2
Connect the camcorder to the PC with a USB  
cable. (pg. 7)  
The [Removable Disk] window appears on the PC’s  
screen after a moment.  
Select [Open folders to view files using Windows  
Explorer] and click [OK].  
Still images (extension “.jpg”) are stored in the [DCIM]  
folder.  
If the [Removable Disk] window does not appear, confirm the connection (pg. 7) or perform the  
following procedure.  
A Click [Start], and then click [My Computer].  
The [Removable Disk] icon which represents the memory card in the camcorder appears in the [My  
Computer] window.  
B Double-click the [Removable Disk] icon.  
NOTES:  
Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder’s  
LCD monitor.  
Saving the wrong kinds of files in a memory card or deleting files or folders from a memory card can cause  
problems with the operation of the camcorder. Delete unnecessary files by the operation on the camcorder.  
If you are using a brand new memory card, you need to initialize the memory card with the camcorder first.  
You may not be able to copy files from the memory card to the PC without doing so.  
The file extension may not appear depending on the setting.  
— 11 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copying Still Images to a PC  
Still image files that are stored in a memory card can be copied to a PC and played back on the PC.  
1
2
Click [Start], and then click [My Picture].  
Create a new folder, enter the folder name,  
and then double-click it.  
3
4
Select the file to be copied in the [DCIM]  
folder.  
Drag and drop the selected file in the  
destination folder created in step 2.  
The message [ACCESSING FILES] appears on the  
camcorder’s LCD monitor, and the file is copied  
from the memory card to the PC.  
NOTE:  
Never disconnect the USB cable while the message [ACCESSING FILES] is displayed on the camcorder’s LCD  
monitor.  
Still Images Playback  
Double-click the still image file (extension “.jpg”) to view a  
still image.  
To print a still image  
Click the icon for printing to display [Photo Printing Wizard].  
Then you can select and print a still image.  
OR  
Select the still image file, and then click [File] and [Print].  
— 12 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disconnecting the USB Cable  
Before replacing memory cards or turning off the PC, first disconnect the USB cable and turn off the  
camcorder.  
1
2
Confirm that the message [ACCESSING FILES] is not currently displayed on the camcorder’s  
LCD monitor.  
If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.  
Double-click the [Safely Remove Hardware] icon  
in the status bar.  
The [Safely Remove Hardware] dialog box appears. if  
not, wait a while then go to step 5.  
3
Select [USB Mass Storage Device], and then click  
[Stop].  
The [Stop a Hardware device] dialog box appears.  
The model name depends on the connected  
camcorder.  
4
Click [OK].  
A message indicating that the device can be safely  
removed appears.  
The model name depends on the connected  
camcorder.  
5
6
Disconnect the USB cable.  
Set the camcorder’s Power Switch to ”OFF”.  
The camcorder turns off.  
— 13 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Importing MPEG-format Video Stream to a PC  
1
2
Connect the camcorder to the PC with an i.LINK cable. (pg. 8)  
Click [Start], go to [All Programs] – [PIXELA] – [HD Capture Utility], and then click [HD  
Capture Utility].  
You can also double-click the [HD Capture Utility 1.0] icon on the desktop.  
3
Make sure that the camcorder’s model name is  
displayed.  
Model name  
If the model name is not displayed, confirm the  
connection (pg. 8) or reinstall the driver (pg. 16).  
If a D-VHS VCR is connected simultaneously, select the  
camcorder’s model name.  
Browse button  
Import button  
4
5
Click [Import], and then click [Browse].  
The [Save As] dialog box appears.  
Specify the file name and location, and then click  
[Save].  
Make sure to select a folder on the local hard disk.  
Approximately 150 MB (300 MB while importing) of the  
hard disk space is required for a 1-minute video stream.  
Select a destination with sufficient space for storage.  
CONTINUED ON NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
— 14 —  
6
Start playback using control buttons.  
You can view playback on the camcorder’s LCD monitor.  
Control buttons  
Start button  
7
8
9
Check playback on the camcorder’s LCD monitor, and then click [Start] approximately 2  
seconds before the scene from where importing to be started.  
Check playback on the camcorder’s LCD monitor, and then click [Cancel] after the scene to  
be imported finishes.  
Click the close button on the upper right of the window to quit HD Capture Utility.  
10 Disconnect the i.LINK cable.  
11 Set the camcorder’s Power Switch to ”OFF”.  
The camcorder turns off.  
NOTES:  
It is not possible to import a scene less than 5 seconds.  
The continuous scene may be divided into two or more files depending on the environment of you PC or  
condition of the tape.  
It is not possible to import video stream from other devices such as a D-VHS VCR.  
The HD Capture Utility is compatible only with MPEG-format video stream. To import DV-format video  
stream, use commercially available video edit software which is compatible with DV format.  
It is recommended to import video stream a little longer (including parts before and after the necessary part)  
than that you actually need. Unnecessary parts of the video clip can be deleted (cut) by MPEG Edit StudioTM  
Pro LE.  
If there are blank or drop-out parts, or switching point of recording mode between 480p and 720p, the  
video stream will be automatically divided into two or more files. The numbers are added to the file, for  
example ”Cap0001.m2t”, ”Cap0001(0001).m2t”, and ”Cap0001(0002).m2t”.  
CONTINUED ON NEXT PAGE  
— 15 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reinstalling the driver  
If the camcorder’s model name does not appear in HD Capture Utility in spite of proper settings, the driver  
may not be correctly installed. In this case, reinstall the driver.  
1
2
Click [Start], right-click [My Computer], and then click [Property].  
The [System Property] window appears.  
Click the [Hardware] tab, and then click [Device Manager].  
The [Device Manager] window appears.  
3
4
Double-click [Sound, video and game controllers].  
Right-click [JVC Tape Device], and then click [Delete].  
If [JVC Tape Device] is not displayed, delete [AV/C Tape Recorder/Player] in [Other Devices].  
The confirmation screen appears.  
5
6
Click [OK].  
Disconnect the i.LINK cable, and connect it again.  
After a moment, the [Found New Hardware Wizard] dialog box appears.  
7
Reinstall the driver.(pg. 9)  
— 16 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Infinity Portable Speaker Five User Manual
Insignia Portable DVD Player 10 0058 User Manual
Jensen Car Speaker 525 User Manual
JVC Cassette Player KS F525 User Manual
JVC DVD Player HR XVS20E User Manual
Kenmore Gas Grill 4151612801 User Manual
Keurig Coffeemaker 60 201173 000 User Manual
KitchenAid Mixer KP50PS User Manual
KitchenAid Range KDRP463LSS04 User Manual
KitchenAid Trash Compactor 9871915B User Manual