JVC Car Stereo System GET0471 001A User Manual

VCD/CD RECEIVER  
KD-SV3305  
KD-SV3305  
For canceling the display demonstration, see page 7.  
For installation and connections, refer to the separate manual.  
INSTRUCTIONS  
GET0471-001A  
[U/UH]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The following marks are used to indicate...  
: Built-in VCD/CD player operations.  
: External CD changer operations.  
CONTENTS  
Control panel ..................................  
Remote controller—RM-RK120.............  
4
5
: Indicator displayed for the  
corresponding operation.  
Getting started................................  
Basic operations...................................................  
7
7
How to use the MODE button  
If you press MODE, the unit goes into functions mode,  
then the number buttons (except “1” and “4”) and  
Radio operations .............................  
8
Disc operations................................  
Playing a disc in the unit .....................................  
9
9
4
/¢ buttons work as different function  
buttons.  
Playing discs in the CD changer ........................... 10  
Sound adjustments.......................... 14  
General settings—PSM ................... 15  
iPod/D. player operations................. 17  
Ex.: When number button 2 works as  
MO (monaural) button.  
Other external component  
operations ................................... 19  
To use these buttons for their original functions  
again after pressing MODE, wait for 5 seconds  
without pressing any of these buttons until the  
functions mode is cleared or press MODE again.  
Maintenance ................................... 19  
More about this unit ........................ 20  
Troubleshooting.............................. 23  
Specifications.................................. 25  
Detaching the control panel  
For safety...  
• Do not raise the volume level too much, as this will  
block outside sounds, making driving dangerous.  
• Stop the car before performing any complicated  
operations.  
Temperature inside the car...  
Attaching the control panel  
If you have parked the car for a long time in hot or cold  
weather, wait until the temperature in the car becomes  
normal before operating the unit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control panel  
Parts identification  
Display window  
1 4 /¢ buttons  
i
o
;
DISP (display) button  
2
(standby/on attenuator) button  
(control panel release) button  
Disc information indicators—TAG (ID3 Tag),  
(folder), (track/file)  
Disc type indicators—WMA, MP3  
Playback source indicators—  
3
Remote sensor  
DO NOT expose the remote sensor to strong light  
(direct sunlight or artificial lighting).  
Loading slot  
a
s
4
5
Display window  
CH: Lights up only when CD-CH is selected as the  
playback source.  
6 0 (eject) button  
7
8
9
EQ (equalizer) button  
SRC (source) button  
BAND button  
6 (play/pause) button  
Control dial  
DISC: Lights up for the built-in CD player.  
Playback mode / item indicators— RND (random),  
(disc), (folder), RPT (repeat)  
LOUD (loudness) indicator  
d
f
g
h
p
q
w
e
r
t
y
u
EQ (equalizer) indicator  
SEL (select) button  
Sound mode (C-EQ: custom equalizer) indicators—  
JAZZ, CLASSIC, HIP HOP, POPS, ROCK, USER  
Tr (track) indicator  
Source display / Volume level indicator  
Main display  
MO (monaural) button  
SSM (Strong-station Sequential Memory) button  
Number buttons  
RPT (repeat) button  
RND (random) button  
MODE button  
j
k
l
/
Tuner reception indicators—ST (stereo),  
MO (monaural)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main elements and features  
Remote controller—  
RM-RK120  
Installing the lithium coin battery  
(CR2025)  
Aim the remote controller directly at the remote  
sensor on the unit. Make sure there is no obstacle  
in between.  
Warning:  
• Do not install any battery other than CR2025 or  
its equivalent; otherwise, it may explode.  
• Do not leave the remote controller in a place  
(such as dashboards) exposed to direct sunlight  
for a long time; otherwise, it may explode.  
• Store the battery in a place where children  
cannot reach to avoid risk of accident.  
• To prevent the battery from over-heating,  
cracking, or starting a fire:  
– Do not recharge, short, disassemble, heat the  
battery, or dispose of it in a fire.  
– Do not leave the battery with other metallic  
materials.  
1
2
SOURCE button  
• Selects the playback source.  
(standby/on attenuator) button  
• Turns the power on if pressed briefly or  
attenuates the sound when the power is on.  
• Turns the power off if pressed and held.  
3 2 REV (reverse) / FWD (forward) 3 buttons  
• Searches for stations if pressed briefly.  
• Fast-forwards or reverses the track if pressed and  
held.  
– Do not poke the battery with tweezers or similar  
tools.  
– Wrap the battery with tape and insulate when  
throwing away or saving it.  
• Changes the tracks if pressed briefly.  
• While listening to an Apple iPod or a JVC  
D. player (in menu selecting mode):  
– Selects an item if pressed briefly. (Then, press  
DOWN to confirm the selection.)  
– Skips 10 items at a time if pressed and held.  
Continued on the next page  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
VOL. + / – buttons  
• Adjusts the volume level.  
ENTER and number buttons  
9
p
PBC (Playback Control) button  
• Activates or deactivates the PBC function.  
RETURN button  
• Selects a track/file directly.  
• Returns to the previous menu while playing a  
VCD in PBC function.  
OSD (On-Screen Display) button  
• Turn on and off the OSD on the monitor.  
AUDIO button  
– Press the number button(s), then press ENTER.  
– Not used for iPod/D. player operations.  
• Selects an item from the menu while playing  
back a Video CD (VCD) in Playback Control (PBC)  
function.  
q
w
• Selects the audio channel for VCD playback.  
– Press the number button(s), then press ENTER.  
• Selects the discs while operating the CD changer.  
– To select disc number 1 – 6, press number  
button 1 – 6 briefly.  
* 5 UP  
: Returns to the previous menu.  
DOWN : Confirms the selection.  
– To select disc number 7 – 12, press and hold  
number button 1 (7) – 6 (12).  
6
7
EQ (equalizer) button  
• Selects the sound mode (C-EQ: custom  
equalizer).  
BAND 6 button  
• Changes the FM/AM bands.  
• Stops disc playback temporarily. To resume  
playback, press the button again.  
– While playing a VCD, the playback scene at the  
moment stops and remain still.  
– Not used for CD changer, iPod, or D. player  
operations.  
8 5 UP / DOWN buttons  
• Changes the preset stations.  
• Changes the folder of the MP3/WMA discs if  
pressed briefly.  
• Changes the disc while operating the CD changer  
if pressed and held.  
• While listening to an iPod or a D. player:  
– Pauses/stops or resumes playback with  
DOWN .  
– Enters the main menu with 5 UP.  
(Now 5 UP / DOWN /2 REV / FWD 3 work  
as the menu selecting buttons.)*  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
To drop the volume in a  
moment (ATT)  
To restore the sound, press the  
button again.  
Getting started  
Basic operations  
To turn off the power  
~ Turn on the power.  
Ÿ
Basic settings  
• See also “General settings — PSM” on pages 15 and  
16.  
1
2
* You cannot select these sources if they are not  
ready or not connected.  
! For FM/AM tuner  
1 Canceling the display demonstrations  
Select “DEMO,” then “DEMO OFF.”  
2 Setting the clock  
Select “CLOCK H” (hour), then adjust the hour.  
Select “CLOCK M” (minute), then adjust the  
minute.  
Adjust the volume.  
3
Finish the procedure.  
Volume level appears.  
To check the current clock time while the  
power is turned off  
@ Adjust the sound as you want. (See  
page 14.)  
Caution on volume setting:  
Discs produce very little noise compared with other  
sources. Lower the volume before playing a disc  
to avoid damaging the speakers by the sudden  
increase of the output level.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
When an FM stereo broadcast is hard to  
receive  
Radio operations  
~
Ÿ
Lights up when monaural mode is activated.  
Reception improves, but stereo effect will be lost.  
To restore the stereo effect, repeat the same  
procedure. “MONO OFF” appears and the MO indicator  
goes off.  
Lights up when receiving an FM stereo  
broadcast with sufficient signal strength.  
! Start searching for a station.  
Storing stations in memory  
You can preset six stations for each band.  
When a station is received, searching stops.  
To stop searching, press the same button  
again.  
FM station automatic presetting—  
SSM (Strong-station Sequential  
Memory)  
1
Select the FM band (FM1 – FM3) you want to  
store into.  
To tune in to a station manually  
In step ! above...  
1
2
3
2
Select a desired station frequency.  
“SSM” flashes, then disappears when automatic  
presetting is over.  
Local FM stations with the strongest signals are  
searched and stored automatically in the FM band.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual presetting  
Ex.: Storing FM station of 92.5 MHz into preset number  
4 of the FM1 band.  
Disc operations  
Playing a disc in the unit  
1
2
All tracks will be played repeatedly until you change the  
source or eject the disc.  
• If a disc menu appears on the monitor while playing a  
VCD with PBC, see page 11.  
3
Preset number flashes for a while.  
Before performing any operations, make sure the  
following....  
• Turn on the monitor and select the appropriate  
monitor input before playing a VCD.  
• If you turn on the monitor, you can also control the  
MP3/WMA playback by referring to the monitor  
screen (see page 12).  
Listening to a preset station  
1
2
Select the preset station (1 – 6) you want.  
• Select the video system suitable for your monitor (see  
page 16).  
To stop play temporarily  
To resume playback, press the  
button again.  
To check the other information while  
listening to the radio  
To stop play and eject the  
disc  
Clock Ô Frequency  
Continued on the next page  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
To fast-forward or reverse the track  
To go to the next or previous tracks  
Playing discs in the CD changer  
All discs in the magazine will be played repeatedly until  
you change the source.  
• Ejecting the magazine will also stop playing.  
~
* If you have changed the external input setting  
to “EXT IN” (see page 16), you cannot select the  
CD changer.  
To go to the next or previous folders (only for  
MP3 or WMA discs)  
Ÿ Select a disc.  
For disc number from 01 – 06:  
For MP3 discs:  
For WMA discs:  
1
For disc number from 07 – 12:  
2
About MP3 and WMA discs  
MP3 and WMA “tracks” (words “file” and “track” are  
used interchangeably) are recorded in “folders.”  
To locate a particular track (for CD or VCD  
with PBC set to “PBC OFF”) or folder (for MP3  
or WMA discs) directly  
To select a number from 01 – 06:  
About the CD changer  
It is recommended to use a JVC MP3-compatible CD  
changer with your unit.  
• You can also connect MP3-incompatible CD changers.  
However, these units are not compatible with MP3  
discs.  
To select a number from 07 – 12:  
• You cannot use the CH-X99, CH-X100, and KD-MK  
series CD changers with this unit.  
• You cannot control and play any WMA or VCD disc in  
the CD changer.  
• Disc text information recorded in the CD Text can be  
displayed when a JVC CD Text compatible CD changer  
is connected.  
• For connection, see Installation/Connection Manual  
(separate volume).  
• To use direct folder access on MP3/WMA discs, it  
is required that folders are assigned with 2-digit  
numbers at the beginning of their folder names—  
01, 02, 03, and so on.  
To select a particular track in a folder  
(for MP3 or WMA discs):  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Control (PBC) operations  
On-Screen (OSD) information  
This operation is only possible when using the  
remote controller.  
This operation is only possible when using the  
remote controller.  
1
While playing a VCD....  
PBC ON Ô PBC OFF  
You can check the track number and elapsed playing  
time if the monitor is turned on.  
While playing a disc....  
• To turn off the On-Screen Display,  
press the button again.  
PBC ON : A menu appears on the monitor.  
PBC OFF: Cancels.  
Current/total track number  
Elapsed playing time  
• A menu may be a list of items, submenus, or  
some moving pictures.  
2
Select the item you want.  
Selecting the audio channel  
This operation is only possible when using the  
remote controller.  
• To select an item from the submenus, repeat this  
step.  
You can select the audio channel to play. (This is  
convenient when playing a Karaoke VCD.)  
The selected item starts playback automatically.  
To correct a mis-entry and to return to the  
previous menu  
STEREO : To listen to normal stereo (left/right)  
playback.  
MONO L : To listen to the L (left) audio channel.  
MONO R : To listen to the R (right) audio channel.  
• The audio channel is automatically set to “STEREO”  
when you change the disc or source.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select a folder  
To select a track  
MP3/WMA control screen operations  
You can also control the playback of an MP3/WMA disc  
by referring to the monitor.  
• The control screen automatically appears on the  
monitor when you insert an MP3/WMA disc.  
• Pressing these buttons repeatedly can also select  
tracks from the previous/next folders.  
• See also page 10 for using the buttons on the control  
panel to select a folder or track.  
Selecting the playback modes  
You can use only one of the following playback modes  
at a time.  
• For VCD: While PBC (see page 11) is not in use.  
1
2
Artiste name* (only for MP3 discs)  
• The artiste name will scroll on the monitor if it  
cannot be shown at a time.  
Operation mode—PLAY, PAUSE, FF (fast-forward),  
FR (fast-reverse), SELECT (selected track number),  
REPEAT TRACK, REPEAT FOLDER, REPEAT OFF,  
RANDOM FOLDER, RANDOM DISC, RANDOM OFF  
• Operation mode appears for a while on the  
monitor.  
1
2
Select your desired playback mode.  
Repeat play  
7
3
4
Folder name*  
Track title* (only for MP3 discs)  
• The track title will scroll on the monitor if it  
cannot be shown at a time.  
Mode  
Plays repeatedly  
TRK RPT : The current track.  
5
6
Highlighted bar for the current file name*  
OSD indication—Current/total track number,  
Elapsed playing time  
• Appears only if you turn on the OSD (see page  
11).  
FLDR RPT*1: All tracks of the current folder.  
DISC RPT*2 : All tracks of the current disc.  
RPT OFF : Cancels.  
7
8
Current list/total list number  
Track list  
• The monitor can show 12 tracks at a time and a  
maximum of 239 tracks for a disc.  
* Some symbols will not be shown (and will be  
substituted or blanked) on the control screen.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• For MP3 disc : When “TAG DISP” is set to “TAG OFF”  
• For WMA disc :  
7
Random play  
Mode  
Plays at random  
FLDR RND*1 : All tracks of the current folder,  
then tracks of the next folder and  
so on.  
: Clock with the current track number  
: Elapsed playing time with the current track  
number  
DISC RND : All tracks of the current disc.  
MAG RND*2 : All tracks of the inserted discs.  
1
*
If the current disc is an audio CD or a VCD, “NO NAME”  
appears.  
Only for the built-in CD player.  
If an MP3 file does not have Tag information, folder  
name and file name appear. In this case, the TAG  
indicator will not light up.  
RND OFF  
: Cancels.  
2
3
*
*
1
*
*
Only while playing an MP3 or a WMA disc.  
Only while playing discs in the CD changer.  
2
Other main functions  
Prohibiting disc ejection  
You can lock a disc in the loading slot.  
Changing the display information  
While playing an audio CD, a CD Text, or a VCD  
with PBC set to “PBC OFF” (see page 11)  
To cancel the prohibition, repeat the same  
procedure.  
While playing an MP3 or a WMA*2 disc  
• Only for MP3 disc : When “TAG DISP” is set to  
“TAG ON” (see page 16)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound  
Sound adjustments  
You can select a preset sound mode suitable to the  
music genre (C-EQ: custom equalizer).  
You can adjust the sound characteristics to your  
preference.  
1
2
Preset values  
BAS  
TRE  
LOUD  
(bass) (treble) (loudness)  
Indication (For)  
USER  
(Flat sound)  
00  
+03 +01  
+01 –02  
+04 +01  
+02 00  
+02 +03  
00  
OFF  
ON  
Indication [Range]  
ROCK  
(Rock or disco music)  
BAS*1 (bass)  
Adjust the bass. [–06 to +06]  
CLASSIC  
(Classical music)  
OFF  
OFF  
ON  
TRE*1 (treble)  
Adjust the treble. [–06 to +06]  
POPS  
(Light music)  
FAD*2 (fader)  
Adjust the front and rear speaker balance. [R06 to F06]  
HIP HOP  
(Funk or rap music)  
BAL (balance)  
Adjust the left and right speaker balance.  
[L06 to R06]  
JAZZ  
(Jazz music)  
OFF  
LOUD*1 (loudness)  
Boost low and high frequencies to produce a well-  
balanced sound at low volume level.  
[LOUD ON or LOUD OFF]  
VOL (volume)  
Adjust the volume. [00 to 30 or 50*3]  
1
*
When you adjust the bass, treble, or loudness, the  
adjustment you have made is stored for the currently  
selected sound mode (C-EQ) including “USER.”  
If you are using a two-speaker system, set the fader  
level to “00.”  
2
3
*
*
Depending on the amplifier gain control setting. (See  
page 16 for details.)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General settings — PSM  
You can change PSM (Preferred Setting Mode) items listed in the table that follows.  
1
4
Repeat steps 2 and 3 to adjust other PSM  
items if necessary.  
2
Select a PSM item.  
5
Finish the procedure.  
3
Adjust the PSM item selected.  
Indications  
DEMO  
Item  
Setting, [reference page]  
(
: Initial)  
DEMO ON  
:
:
Display demonstration will be activated automatically if no  
operation is done for about 20 seconds, [7].  
Cancels.  
Display demonstration  
DEMO OFF  
CLOCK H  
1 – 12  
[Initial: 1 (1:00)], [7]  
Hour adjustment  
CLOCK M  
00 – 59  
[Initial: 00 (1:00)], [7]  
Minute adjustment  
DIMMER  
Dimmer  
ON  
OFF  
:
:
Dims the display illumination of this unit.  
Cancels.  
TEL  
MUTING 1/  
MUTING 2:  
OFF  
:
:
Select either one which mutes the sounds while using a cellular  
phone.  
Cancels.  
Telephone muting  
Continued on the next page  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indications  
Item  
Setting, [reference page]  
(
: Initial)  
SCROLL *1  
Scroll  
ONCE  
AUTO  
OFF  
:
:
:
Scrolls the track information once.  
Repeats scrolling (at 5-second intervals).  
Cancels.  
• Pressing DISP for more than one second can scroll the display  
regardless of the setting.  
TAG DISP  
Tag display  
TAG ON  
TAG OFF  
:
:
Shows the Tag information while playing MP3 tracks, [13].  
Cancels.  
AMP GAIN  
Amplifier gain control  
LOW PWR  
HIGH PWR  
:
:
VOL 00 – VOL 30 (Select this if the maximum power of the speaker  
is less than 50 W to prevent damaging the speaker.)  
VOL 00 – VOL 50  
VIDEO  
Video system  
PAL  
NTSC  
:
:
Select this if your monitor is of the PAL color system.  
Select this if your monitor is of the NTSC color system.  
• Press SEL to activate the selection before you select the other PSM  
items to adjust.  
EXT IN *2  
External input  
CHANGER  
EXT IN  
:
:
To use a JVC CD changer, [10], an Apple iPod or a JVC D. player,  
[17].  
To use any other external component than the above, [19].  
1
*
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display.  
Displayed only when one of the following sources is selected—FM, AM, DISC, or LINE IN.  
2
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To pause*1 or stop*2 playback  
iPod/D. player operations  
This unit is ready for operating an Apple iPod or a JVC  
D. player from the control panel.  
To resume playback, press 4 after pressing  
MODE.  
Before operating your iPod or D. player:  
Connect either one of the following (separately  
purchased) to the CD changer jack on the rear of this  
unit.  
Interface adapter for iPod—KS-PD100 for  
controlling an iPod.  
To fast-forward or reverse the track  
To go to the next or previous tracks  
D. player interface adapter—KS-PD500 for  
controlling a D. player.  
• For connection, see Installation/Connection Manual  
(separate volume).  
• For details, refer also to the manual supplied with the  
interface adapter.  
1
*
*
For iPod  
For D. player  
2
Preparations:  
Make sure “CHANGER” is selected for the external input  
setting, see page 16.  
~
Ÿ
Playback starts automatically from where it has  
been paused*1 or stopped*2 previously.  
! Adjust the volume.  
Adjust the sound as you want. (See  
page 14.)  
Continued on the next page  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a track from the menu  
Selecting the playback modes  
1
2
1
2
Enter the main menu.  
Select your desired playback mode.  
Now the 4 /¢ buttons  
work as the menu selecting buttons*.  
7
Repeat play  
3
Select the desired menu.  
ONE RPT  
Functions the same as “Repeat One” of the iPod or  
“Repeat Mode = One” for the D. player.  
ALL RPT  
For iPod:  
Functions the same as “Repeat All” of the iPod or  
“Repeat Mode = All” for the D. player.  
PLAYLIST Ô ARTISTS Ô ALBUMS Ô  
SONGS Ô GENRES Ô COMPOSER Ô  
(back to the beginning)  
RPT OFF  
Cancels.  
For D. player:  
7
Random play  
PLAYLIST Ô ARTIST Ô ALBUM Ô  
GENRE Ô TRACK Ô (back to the  
beginning)  
ALBM RND*  
Functions the same as “Shuffle Albums” of the  
iPod.  
4
Confirm the selection.  
SONG RND/RND ON  
Functions the same as “Shuffle Songs” of the iPod  
or “Random Play = On” of the D. player.  
To move back to the previous menu, press ¢  
after pressing MODE.  
RND OFF  
• If a track is selected, playback starts  
automatically.  
• If the selected item has another layer, you will  
enter the layer. Repeat steps 3 and 4 until the  
desired track is played.  
Cancels.  
* For iPod: Functions only if you select “ALL” in  
“ALBUMS” of the main “MENU.”  
• Holding 4 /¢ can skip 10 items at  
a time.  
To check the other information while  
listening to an iPod or a D. player  
* The menu selecting mode will be canceled:  
If no operations are done for about 5 seconds.  
When you confirm the selection of a track.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other external component Maintenance  
operations  
How to clean the connectors  
Frequent detachment will deteriorate the connectors.  
To minimize this possibility, periodically wipe the  
connectors with a cotton swab or cloth moistened with  
alcohol, being careful not to damage the connectors.  
You can connect an external component to the LINE IN  
plugs on the rear, and another to the CD changer jack  
on the rear using the Line Input Adapter—KS-U57  
(not supplied) or AUX Input Adapter—KS-U58 (not  
supplied).  
• For connection, see Installation/Connection Manual  
(separate volume).  
• For listening to the iPod or D. player, refer to pages  
17 and 18.  
Connector  
Moisture condensation  
Moisture may condense on the lens inside the unit in  
the following cases:  
• After starting the heater in the car.  
~
• If it becomes very humid inside the car.  
Should this occur, the unit may malfunction. In this  
case, eject the disc and leave the unit turned on for a  
few hours until the moisture evaporates.  
If “EXT IN” does not appear, see page 16 and  
select the external input (“EXT IN”).  
Ÿ Turn on the connected component and  
start playing the source.  
How to handle discs  
When removing a disc from its  
case, press down the center holder of  
the case and lift the disc out, holding  
it by the edges.  
Center holder  
! Adjust the volume.  
• Always hold the disc by the edges. Do not touch its  
recording surface.  
When storing a disc into its case, gently insert the  
disc around the center holder (with the printed surface  
facing up).  
Adjust the sound as you want. (See  
page 14.)  
• Make sure to store discs into the cases after use.  
To check the other information while  
listening to an external component  
Clock Ô EXT IN or LINE IN  
Continued on the next page  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To keep discs clean  
More about this unit  
A dirty disc may not play correctly.  
If a disc does become dirty, wipe it with  
a soft cloth in a straight line from center  
to edge.  
Basic operations  
Turning on the power  
• Do not use any solvent (for example, conventional  
record cleaner, spray, thinner, benzine, etc.) to clean  
discs.  
• By pressing SRC on the unit, you can also turn on the  
power. If the source is ready, playback also starts.  
Turning off the power  
To play new discs  
• If you turn off the power while listening to a disc, disc  
play will start from where playback has been stopped  
previously, next time you turn on the power.  
• For MP3/WMA discs, playback will start from the  
beginning of the last playing track.  
New discs may have some rough spots  
around the inner and outer edges. If  
such a disc is used, this unit may reject  
the disc.  
To remove these rough spots, rub the edges with a  
pencil or ball-point pen, etc.  
Tuner operations  
Storing stations in memory  
• During SSM search...  
– All previously stored stations are erased and  
stations are stored newly.  
– Received stations are preset in No. 1 (lowest  
frequency) to No. 6 (highest frequency).  
– When SSM is over, the station stored in No. 1 will  
be automatically tuned in.  
Do not use the following discs:  
Warped disc  
Sticker  
Sticker residue  
• When storing a station manually, the previously  
preset station is erased when a new station is stored  
in the same preset number.  
Stick-on label  
Disc operations  
Unusual shape  
Caution for DualDisc playback  
• The Non-DVD side of a “DualDisc” does not comply  
with the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
Single CD (8 cm disc)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General  
Playing a VCD disc  
• This unit has been designed to reproduce CDs/CD  
Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable)  
in audio CD (CD-DA), MP3 and WMA formats.  
• This unit cannot playback SVCD, DVDs, CD-Gs, or CD-I  
discs.  
• The PBC function is not available for some VCDs.  
• The PBC function is automatically canceled when you  
change the source or turn off the unit. Playback starts  
from the beginning of the dics when you play the  
VCD again.  
• When a disc is inserted upside down, the disc  
automatically ejects.  
• While fast-forwarding or reversing on an MP3 or  
WMA disc, you can only hear intermittent sounds.  
• The On-Screen Display (OSD) will automatically  
canceled when you change the source or turn off the  
unit.  
Playing an MP3/WMA disc  
Playing a CD-R or CD-RW  
• This unit can play back MP3/WMA files with the  
extension code <.mp3> or <.wma> (regardless of  
the letter case—upper/lower).  
• This unit can show the names of albums, artists  
(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or  
2.4) for MP3 files.  
• This unit can display only one-byte characters. No  
other characters can be correctly displayed.  
• This unit can play back MP3/WMA files meeting the  
conditions below:  
• Use only “finalized” CD-Rs or CD-RWs.  
• This unit can play back only files of the same type  
which are first detected if a disc includes both audio  
CD (CD-DA) files and MP3/WMA files.  
• This unit can play back multi-session discs; however,  
unclosed sessions will be skipped while playing.  
• Some CD-Rs or CD-RWs may not play back on this  
unit because of their disc characteristics, or for the  
following reasons:  
– Discs are dirty or scratched.  
– Moisture condensation occurs on the lens inside  
the unit.  
– Bit rate: MP3: 32 kbps — 320 kbps  
WMA: 48 kbps — 192 kbps  
– Sampling frequency:  
– The pickup lens inside the unit is dirty.  
– CD-R/CD-RW on which the files are written with  
“Packet Write” method.  
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)  
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)  
48 kHz, 44.1 kHz, 32 kHz (for WMA)  
– There are improper recording conditions (missing  
data, etc.) or media conditions (stained, scratched,  
warped, etc.).  
• CD-RWs may require a longer readout time since the  
reflectance of CD-RWs is lower than that of regular  
CDs.  
• Do not use the following CD-Rs or CD-RWs:  
– Discs with stickers, labels, or a protective seal stuck  
to the surface.  
– Disc format: ISO 9660 Level 1/Level 2, Romeo,  
Joliet, Windows long file name  
• The maximum number of characters for file/folder  
names vary among the disc format used (includes 4  
extension characters—<.mp3> or <.wma>).  
– ISO 9660 Level 1: up to 12 characters  
– ISO 9660 Level 2: up to 31 characters  
– Romeo: up to 40 characters  
– Joliet: up to 40 characters  
– Discs on which labels can be directly printed by an  
ink jet printer.  
– Windows long file name: up to 40 characters  
Using these discs under high temperatures or high  
humidities may cause malfunctions or damage to the  
unit.  
Continued on the next page  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• This unit can play back files recorded in VBR (variable  
bit rate).  
General settings—PSM  
• If you change the “AMP GAIN” setting from  
“HIGH PWR” to “LOW PWR” while the volume level  
is set higher than “VOL 30,” the unit automatically  
changes the volume level to “VOL 30.”  
Files recorded in VBR have a discrepancy in elapsed  
time display, and do not show the actual elapsed  
time. Especially, after performing the search function,  
this difference becomes noticeable.  
• This unit can recognize a total of 512 files, of 200  
folders, and of 8 hierarchies.  
• This unit cannot play back the following files:  
– MP3 files encoded with MP3i and MP3 PRO format.  
– MP3 files encoded in an inappropriate format.  
– MP3 files encoded with Layer 1.  
– WMA files encoded with lossless, professional, and  
voice format.  
– WMA files which are not based upon Windows  
Media® Audio.  
– WMA files copy-protected with DRM.  
– Files which have the data such as WAVE, ATRAC3,  
etc.  
iPod or D. player operations  
• When you turn on this unit, the iPod or D. player is  
charged through this unit.  
• While the iPod or D. player is connected, all  
operations from the iPod or D. player are disabled.  
Perform all operations from this unit.  
• The text information may not be displayed correctly.  
• If the text information includes more than 8  
characters, it scrolls on the display. This unit can  
display up to 40 characters.  
Notice:  
When operating an iPod or a D. player, some  
operations may not be performed correctly or as  
intended. In this case, visit the following JVC web  
site:  
car/support/ks-pd100/index.html>  
For D. player users: <http://www.jvc.co.jp/  
english/car/support/ks-pd500/index.html>  
• The search function works but search speed is not  
constant.  
Changing the source  
• If you change the source, playback also stops  
(without ejecting the disc).  
Next time you select “DISC” for the playback source,  
disc play starts from where it has been stopped  
previously.  
• For MP3/WMA discs, playback will start from the  
beginning of the last playing track.  
• Microsoft and Windows Media are either registered  
trademarks or trademarks of Microsoft Corporation in  
the United States and/or other countries.  
• iPod is a trademark of Apple Inc., registered in the  
U.S. and other countries.  
Ejecting a disc  
• If the ejected disc is not removed within 15 seconds,  
the disc is automatically inserted again into the  
loading slot to protect it from dust. (Disc will not play  
this time.)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
What appears to be trouble is not always serious. Check the following points before calling a service center.  
Symptoms  
Remedies/Causes  
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.  
• Check the cords and connections.  
• The unit does not work at all.  
Reset the unit (see page 2).  
• SSM automatic presetting does not work. Store stations manually.  
• Static noise while listening to the radio.  
• Disc automatically ejects.  
Connect the antenna firmly.  
Insert the disc correctly.  
• CD-R/CD-RW cannot be played back.  
• Tracks on the CD-R/CD-RW cannot be  
skipped.  
• Insert a finalized CD-R/CD-RW.  
• Finalize the CD-R/CD-RW with the component which you  
used for recording.  
• Disc can be neither played back nor  
ejected.  
• Unlock the disc (see page 13).  
• Eject the disc forcibly (see page 2).  
• Sound and pictures are sometimes  
interrupted or distorted.  
• Stop playback while driving on rough roads.  
• Change the disc.  
• Check the cords and connections.  
• “NO DISC” appears on the display.  
Insert a playable disc into the loading slot.  
• No playback picture appears on the  
monitor.  
Parking brake wire is not connected properly.  
(See Installation/Connection manual.)  
• No picture appears on the monitor at all. • Connect the video cord correctly.  
• Select a correct input on the monitor.  
• Disc cannot be played back.  
• Use a disc with MP3/WMA tracks recorded in the format  
compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.  
• Add the extension code <.mp3> or <.wma> to the file  
names.  
• Noise is generated.  
Skip to another track or change the disc. (Do not add the  
extension code <.mp3> or <.wma> to non-MP3 or WMA  
tracks.)  
• A longer readout time is required (“CHECK” Do not use too many hierarchies and folders.  
keeps flashing on the display).  
Continued on the next page  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptoms  
Remedies/Causes  
• Tracks do not play back in the order you  
have intended them to play.  
Playback order is determined when the files are recorded.  
• Elapsed playing time is not correct.  
This sometimes occurs during play. This is caused by how the  
tracks are recorded on the disc.  
• “NO FILES” appears on the display.  
Insert a disc that contains MP3/WMA tracks.  
• Correct characters are not displayed (e.g. This unit can only display letters (upper case), numbers, and a  
album name).  
limited number of symbols.  
Insert a disc into the magazine.  
Insert the magazine.  
• “NO DISC” appears on the display.  
• “NO MAG” appears on the display.  
• “RESET 8” appears on the display.  
Connect this unit and the CD changer correctly and press the  
reset button of the CD changer.  
• “RESET 1” – “RESET 7” appears on the  
display.  
Press the reset button of the CD changer.  
• The CD changer does not work at all.  
Reset the unit (see page 2).  
• The iPod or D. player does not turn on or • Check the connecting cable and its connection.  
does not work.  
• Update the firmware version.  
• Charge the battery.  
• Buttons do not work as intended.  
• The sound is distorted.  
The functions of the buttons have been changed. Press MODE  
before performing the operation.  
Deactivate the equalizer either on the unit or the iPod/  
D. player.  
• “NO IPOD” or “NO DP” appears on the  
display.  
• Check the connecting cable and its connection.  
• Charge the battery.  
• Playback stops.  
The headphones are disconnected during playback. Restart  
the playback operation using the control panel (see page 17).  
• No sound can be heard when  
connecting an iPod nano.  
• Disconnect the headphones from the iPod nano.  
• Update the firmware version of the iPod nano.  
• No sound can be heard.  
• “ERROR 01” appears on the display  
when connecting a D. player.  
Disconnect the adapter from the D. player. Then, connect it  
again.  
• “NO FILES” or “NO TRACK” appears on  
the display.  
No tracks are stored. Import tracks to the iPod or D. player.  
• “RESET 1” – “RESET 7” appears on the  
display.  
Disconnect the adapter from both the unit and iPod/D. player.  
Then, connect it again.  
• “RESET 8” appears on the display.  
Check the connection between the adapter and this unit.  
• The iPod’s or D. player’s controls do not Reset the iPod or D. player.  
work after disconnecting from this unit.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AUDIO AMPLIFIER SECTION  
VCD/CD PLAYER SECTION  
Maximum Power Output:  
Type:  
Compact disc player  
Front/Rear:  
50 W per channel  
Signal Detection  
System:  
Non-contact optical pickup  
(semiconductor laser)  
Continuous Power Output (RMS):  
Number of Channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Front/Rear:  
19 W per channel into  
4 Ω, 40 Hz to 20 000 Hz at  
no more than 0.8% total  
harmonic distortion.  
Dynamic Range:  
96 dB  
Signal-to-Noise Ratio: 98 dB  
Load Impedance:  
Tone Control Range:  
Bass:  
4 Ω (4 Ω to 8 Ω allowance)  
Wow and Flutter:  
Less than measurable limit  
MP3 Decoding Format: (MPEG1/2 Audio Layer 3)  
10 dB at 100 Hz  
10 dB at 10 kHz  
40 Hz to 20 000 Hz  
70 dB  
2.5 V/20 kΩ load (full  
scale)  
Max. Bit Rate:  
320 kbps  
Treble:  
WMA (Windows Media® Audio) Decoding Format:  
Frequency Response:  
Signal-to-Noise Ratio:  
Line-Out Level/  
Impedance:  
Max. Bit Rate:  
192 kbps  
GENERAL  
Power Requirement:  
Output Impedance:  
Other Terminal:  
1 kΩ  
LINE IN, CD changer  
Operating Voltage: DC 14.4 V  
(11 V to 16 V allowance)  
Negative ground  
VIDEO SECTION  
Grounding System:  
Color System:  
PAL/NTSC  
Allowable Operating 0°C to +40°C  
Temperature:  
Video Output (Composite): 1 Vp-p/75 Ω  
Dimensions (W × H × D): (approx.)  
TUNER SECTION  
Frequency Range:  
Installation Size:  
Panel Size:  
182 mm × 52 mm × 150 mm  
188 mm × 58 mm × 11 mm  
FM:  
87.5 MHz to 108.0 MHz  
Mass:  
1.4 kg  
(excluding accessories)  
AM:  
531 kHz to 1 602 kHz  
FM Tuner  
Usable Sensitivity:  
Design and specifications are subject to change without  
notice.  
11.3 dBf (1.0 μV/75 Ω)  
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)  
Alternate Channel  
65 dB  
Selectivity (400 kHz):  
Frequency Response:  
Stereo Separation:  
AM Tuner  
40 Hz to 15 000 Hz  
30 dB  
Sensitivity/Selectivity:  
20 μV/35 dB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
EN, TH  
© 2007 Victor Company of Japan, Limited  
0207DTSMDTJEIN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KD-SV3305  
Installation/Connection Manual  
°“√µ¥µß/§¡Õ°“√µ¥µß  
0207DTSMDTJEIN  
EN, TH  
GET0471-004A  
[U/UH]  
© 2007 Victor Company of Japan, Limited  
ENGLISH  
‰∑¬  
™¥ª√–°Õ∫π‰¥√∫°“√ÕÕ°·∫∫¡“‡æÕ„™ß“π°∫√–∫∫ °√–· ‰øø“ “¬¥π¢«≈∫°√–· µ√ß 12 ‚«≈∑ À“°√∂¬πµ¢Õߧ≥‰¡‰  
¥„™√–∫∫π µÕß„™‡§√Õß·ª≈ß°√–· ‰ø™«¬ ´ß “¡“√∂À“´Õ‰¥®“°√“π¢“¬‡§√Õ߇ ¬ß√∂¬πµ JVC  
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does  
not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.  
WARNINGS  
§”‡µÕπ  
• DO NOT install any unit in locations where;  
Õ¬“µ¥µß‡§√Õß„πµ”·Àπß∑;  
– it may obstruct the steering wheel and gearshift lever operations.  
– it may obstruct the operation of safety devices such as air bags.  
– it may obstruct visibility.  
ÕÕ®®°°¥¥¢¢««ßß°°ßßππ¢¢ÕÕßßæÕª«ß°¡ª¬Õ·ß°π§§π«°¡¬ª≈Õ¥¿¬ ‡™π ·Õ√·∫§  
Õ“®°¥¢«“ß “¬µ“  
• DO NOT operate the unit while driving.  
• If you need to operate the unit while driving, be sure to look ahead carefully.  
• The driver must not watch the monitor while driving.  
If the parking brake is not engaged, “PARKING” flashes on the display, and no playback  
picture will be shown on the monitor.  
– This warning appears only when the parking brake wire is connected to the parking brake  
system built in the car.  
Õ¬“„™ß“π¢≥–¢∫¢  
∂“®”‡ªπµÕß„™‡§√Õߢ≥–¢∫¢ ¢Õ„À¥∑“ߢ“ßÀπ“„À¥  
º¢∫µÕ߉¡¡Õß∑®Õ¡Õπ‡µÕ√¢≥–¢∫¢  
À“°‰¡‰¥¢π‡∫√°¡Õ ¢Õ§«“¡ “PARKING” ®–°√–æ√∫∫π®Õ· ¥ßº≈ ·≈–®–‰¡¡√ª°“√‡≈π· ¥ß∫π®Õ¿“æ  
§”‡µÕππ®–ª√“°Æ¢π‡©æ“–‡¡ÕµÕ “¬‡∫√°°∫√–∫∫‡∫√°„π√∂¬πµ‰«‡∑“ππ  
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all ‡æÕªÕß°π°“√‡°¥‰øø“≈¥«ß®√ ¢Õ·π–π”„Àª≈¥¢«·∫µ‡µÕ√≈∫ÕÕ° ·≈«®ßµÕ “¬‰ø°Õπµ¥µß‡§√Õß  
electrical connections before installing the unit.  
• Be sure to ground this unit to the car’s chassis again after installation.  
µ√«® Õ∫„À·π„®«“‰¥‡¥π “¬¥πµÕ√–À«“߇§√Õß°∫µ«∂ß √∂¬πµ„À¡·≈«À≈ß®“°µ¥µß  
À¡“¬‡Àµ:  
Notes:  
„™æ°¥®”‡æ“–·∑πø« À“°ø« ¢“¥∫Õ¬ „Àª√°…“√“ π¢“¬‡§√Õ߇ ¬ß√∂¬πµ JVC  
• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio  
dealer.  
• It is recommended to connect to the speakers with maximum power of more than 50 W (both at  
the rear and at the front, with an impedance of 4 to 8 ). If the maximum power is less than  
50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see page 16 of the  
INSTRUCTIONS).  
¢Õ·π–π”„ÀµÕ≈”‚æß ∑¡°”≈ߢ∫ ß ¥‡°π°«“ 50 W (∑ߥ“πÀπ“·≈–¥“πÀ≈ß ¡§“§«“¡µ“π∑“π 4 ∂ß 8 )  
∂“°”≈ߢ∫µ”°«“ 50 W „À‡ª≈¬π§“ “AMP GAIN” ‡æÕªÕß°π‰¡„À≈”‚æß™”√¥ (¥Àπ“ 16 §”·π–π”)  
°“√ªÕß°π°“√≈¥«ß®√ ®–µÕßæ㛮 “¬µ–°« ∑‰¡„™·≈«¥«¬‡∑ ªæ𠓬‰ø  
·ºπ√–∫“¬§«“¡√Õπ®–√Õπ¡“°À≈ß®“°„™ √–¡¥√–«ßÕ¬“‰ª ¡º ‡¡Õ∂Õ¥™¥ª√–°Õ∫π  
• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.  
• The heat sink becomes very hot after use. Be careful not to touch it when removing this unit.  
Heat sink  
·ºπ√–∫“¬§«“¡√Õπ  
PRECAUTIONS on power supply and speaker connections:  
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit  
will be seriously damaged.  
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in  
your car.  
¢Õ§«√√–«ß”À√∫°“√µÕ·À≈ß®“¬°”≈ß·≈–≈”‚æß:  
Õ¬“µÕ “¬µ–°«‡§‡∫≈°”≈ߢÕß≈”‚æ߇¢“°∫·∫µ‡µÕ√√∂¬πµ ¡©–π𠙥ª√–°Õ∫®–‰¥√∫§«“¡‡ ¬À“¬¡“°  
°Õπ∑®–µÕ“¬µ–°«‡§‡∫≈°”≈ߢÕß≈”‚æ߇¢“°∫≈”‚æß „Àµ√«®Õ∫°“√‡¥π“¬‰ø≈”‚æß„π√∂¢Õߧ≥„À‡√¬∫√Õ¬‡¬°Õπ  
Parts list for installation and connection  
√“¬°“√ «πª√–°Õ∫ ”À√∫µ¥µß·≈–‡™Õ¡µÕ°π  
If any item is missing, consult your JVC car audio dealer immediately.  
À“°¡ ß„¥‰¡§√∫ °√≥“ª√°…“µ«·∑π®”À𓬇§√Õ߇ ¬ßµ¥√∂¬πµ JVC ‚¥¬∑π∑  
A / B  
Hard case/Control panel  
≈ß∫√√®/À𓪥  
C
D
E
Sleeve  
ª≈Õ°À¡  
Trim plate  
·ºπ‚≈À–¢Õ∫·µß  
Power cord  
“¬‡§‡∫≈°”≈ß  
F
G
H
I
Crimp connector  
¢«µÕ ”À√∫Àπ∫  
Washer (ø5)  
ª√–‡°π«ß·À«π (ø5)  
Lock nut (M5)  
πÕµ≈Õ§ (M5)  
Mounting bolt (M5 × 20 mm)  
≈°µ¥ (M5 × 20 ¡≈≈‡¡µ√)  
J
K
L
M
Rubber cushion  
¬“ß°π°√–·∑°  
Handles  
§π∫ߧ∫  
Remote controller  
√‚¡µ§Õπ‚∑√≈  
Battery  
·∫µ‡µÕ√  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (IN-DASH MOUNTING)  
°“√µ¥µß (°“√ª√–°Õ∫·ºßÀπ“ª∑¡‡¢“)  
The following illustration shows a typical installation. If you have any questions or require information  
regarding installation kits, consult your JVC car audio dealer or a company supplying kits.  
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.  
¿“浫լ“ßµÕ‰ªπ· ¥ß∂ß°“√µ¥µß·∫∫∑«‰ª À“°§≥¡ª≠À“À√ÕµÕß°“√¢Õ¡≈‡°¬«°∫™¥µ¥µß °√≥“ª√°…“°∫º¢“¬‡§√Õ߇  
¬ß√∂¬πµ JVC ¢Õß∑“πÀ√Õ∫√…  
™¥ª√–°Õ∫ ∂“§≥‰¡·π„®«“µ¥µß™¥ª√–°Õ∫π∂°µÕßÀ√Õ‰¡ „ÀÀ“™“ߺ‡™¬«™“≠‡ªπºµ¥µß  
Do the required electrical connections.  
µÕ “¬‰øµ“¡∑°”À𥉫∑ßÀ¡¥  
Bend the appropriate tabs to hold the  
sleeve firmly in place.  
ßÕ·ºπ‡æÕ¬¥ª≈Õ°„ÀµÕ°π‡¢“∑  
When using the optional stay / ‡¡Õ„™µ«¬¥·∫∫‡≈Õ°‰¥  
When installing the unit without using the sleeve / ‡¡Õµ¥µß™¥ª√–°Õ∫‚¥¬‰¡„™ª≈Õ°À¡  
In a Toyota car for example, first remove the car radio and install the unit in its place.  
Stay (option)  
µ«Õ¬“߇™π „π√∂¬πµ‚µ‚¬µ“ „À∂Õ¥«∑¬µ¥√∂¬πµÕÕ°°Õπ ·≈«®ßµ¥µß‡§√Õßπ‡¢“·∑π∑  
µ«¬¥ (‡≈Õ°‰¥)  
Fire wall  
ºπß°π‰ø  
Flat type screws (M5 × 8 mm)*2  
°√À«‡√¬∫ (M5 × 8 ¡¡.)*2  
D·ºaßshÀbπoaªrd¡  
á
Bracket*2  
·∑π√Õß√∫*2  
Screw (option)  
°√ (‡≈Õ°‰¥)  
Flat type screws (M5 × 8 mm)*2  
°√À«‡√¬∫ (M5 × 8 ¡¡.)*2  
P°ocªket  
Bracket*2  
·∑π√Õß√∫*2  
Install the unit at an angle of less than 30˚.  
Note  
: When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are  
used, they could damage the unit.  
µ¥µß™¥ª√–°Õ∫∑¡¡µ”°«“ 30˚ Õß»“  
À¡“¬‡Àµ  
:
‡¡Õµ¥µß™¥ª√–°Õ∫≈ß„π·∑π√Õß√∫‰« „À„™ °√¬“«¢π“¥ 8 ¡¡. ∂“„™ °√¬“«°«“πÕ“®∑”„À™¥ª√–°Õ∫‡ ¬À“¬‰¥  
°“√∂Õ¥™¥ª√–°Õ∫  
Removing the unit  
Before removing the unit, release the rear section.  
°Õπ®–∂Õ¥™¥ª√–°Õ∫ „Àª≈¥Àπ“µ¥ «π∑“¬°Õπ  
Insert the two handles, then pull them as  
illustrated so that the unit can be removed.  
„§π∫ߧ∫  
2
Õπ≈ß„π√Õß”À√∫„™æπ≈«¥  
¥ß¿“æ ®“°ππ „À‡≈Õ𙥪√–°Õ∫ÕÕ°  
„π¢≥–∑§Õ¬ ʥߧπ∫ߧ∫∑ß Õß ÕπÕÕ°®“°°π  
*
*
When you stand the unit, be careful not to damage the fuse on the rear.  
Not supplied for this unit.  
*1 ‡¡Õ§≥µß™¥ª√–°Õ∫¢π √–«ßÕ¬“∑”„Àø« ∫√‡«≥ «π∑“¬‡ ¬À“¬  
*2 ‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π  
1
2
TROUBLESHOOTING  
The fuse blows.  
°“√µ√«®Õ∫ª≠À“¢¥¢Õß  
ø« ú¢“¥  
* Are the red and black leads connected correctly?  
* ¡°“√‡™Õ¡ “¬µ–°« ¥”·≈– ·¥ßÕ¬“ß∂°µÕßÀ√Õ‰¡  
Power cannot be turned on.  
* Is the yellow lead connected?  
‰¡ “¡“√∂‡ª¥‡§√Õ߉¥  
* ¡°“√‡™Õ¡ “¬µ–°« ‡À≈ÕßÀ√Õ‰¡  
‰¡¡‡ ¬ßÕÕ°®“°≈”‚æß  
No sound from the speakers.  
* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æ߇°¥‰øø“≈¥«ß®√À√Õ‰¡  
* Is the speaker output lead short-circuited?  
‡ ¬ß‡æ¬π  
Sound is distorted.  
* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æßµÕ≈ߥπÀ√Õ‰¡  
* “¬¢«≈∫ “–” ¢Õß≈”‚æߥ“π´“¬ (L) ·≈–¢«“ (R) µÕ≈ß¥πµ“¡ª°µÀ√Õ‰¡  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
‡ ¬ß√∫°«π  
Noise interfere with sounds.  
* ¡°“√„™ “¬ πÊ À√ÕÀπ“Ê µÕ®“°‡§√Õß «π∑µ¥µß ‰«∫πæπ¥“πÀ≈ß°∫µ«∂ß√∂¬πµÀ√Õ‰¡  
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?  
™¥ª√–°Õ∫√Õπ¢π  
This unit becomes hot.  
* “¬µ–°« «π∑ÕÕ°∑“ß≈”‚æßµÕ≈ߥπÀ√Õ‰¡  
* “¬¢«≈∫ “–” ¢Õß≈”‚æߥ“π´“¬ (L) ·≈–¢«“ (R) µÕ≈ß¥πµ“¡ª°µÀ√Õ‰¡  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
‡§√Õß√∫π∑”ß“π‰¡  
This unit does not work at all.  
* Have you reset your unit?  
* ∑“π‰¥µß‡§√Õß„À¡À√Õ¬ß  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
‰∑¬  
ELECTRICAL CONNECTIONS  
°“√‡™Õ¡‚¥¬„øø“  
A
Typical connections / °“√‡™Õ¡µÕ·∫∫ª°µ  
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious  
damage to this unit.  
The leads of the power cord and those of the connector from the car body may be different in color.  
°Õ•∑”°“•‡™•Õ¡µÕ: µ•«®†Õ•°“•‡¥•†“¬‰ø„•••¬•µÕ¬“ß•–¡¥•–«Õ¬“„Àº¥æ•“¥„•°“•‡™•Õ¡µÕ™¥ª•–°Õ•™¥•  
°“•‡™•Õ¡µÕº¥æ•“¥Õ“®∑”„À‡°¥§«“¡‡ ¬À“¬•“¬·•ß°•™¥ª•–  
°Õ••‰¥“•µ–°«¢Õ߆“¬‰ø ·•–¢ÕßÕª°••µÕ‡™•Õ¡®“°µ«• ß••Õ“®¡ ∑‰¡‡À¡•Õ•°•  
1 µÕ “¬‰ø µ“¡≈”¥∫∑√–∫„π√ª¥“π≈“ß  
1 Connect the colored leads of the power cord in the order specified in the illustration below.  
2 Connect the antenna cord.  
3 Finally connect the wiring harness to the unit.  
2 ‡™Õ¡µÕ°∫“¬Õ“°“»  
3 ¥∑“¬ µÕ «π§«∫§¡°“√‡¥π “¬‰ø‡¢“°∫™¥ª√–°Õ∫™¥π  
LINE IN  
(see diagram / ¥·ºπ¿¡  
)
Line out (see diagram  
)
VIDEO OUT  
“¬ÕÕ° (¥·ºπ¿¡  
)
(see diagram / ¥·ºπ¿¡  
)
Rear ground terminal  
®¥‡™Õ¡µÕ “¬¥π¥“πÀ≈ß  
15 A fuse  
ø« ¢π“¥ 15 A  
Antenna terminal  
To external components  
(see diagram  
)
¢«µÕ “¬Õ“°“»  
™Õ߇ ¬∫µÕ¢ÕßÕª°√≥¿“¬πÕ°  
Ignition switch  
(¥·ºπ¿¡  
)
Black  
¥”  
«∑™®¥√–‡∫¥  
To metallic body or chassis of the car  
µÕ°∫‚§√ß‚≈À–À√Õ‡™´ ¢Õß√∂¬πµ  
Yellow *2  
‡À≈Õß *2  
To a live terminal in the fuse block connecting to the car battery  
(bypassing the ignition switch) (constant 12 V)  
µµÕ°∫¢«∑¡°√–·‰øø“„π·ºßø« ´ßµÕ°∫·∫µ‡µÕ√√∂¬πµ  
(‚¥¬‰¡µÕß„™« ∑™®¥√–‡∫¥) (12 ‚«≈∑§ß∑)  
To an accessory terminal in the fuse block  
Red  
·¥ß  
µÕ°∫¢« «πª√–°Õ∫„π·ºßø«  
Fuse block  
·ºßø«  
Blue  
»ø“  
To the automatic antenna if any (250 mA max.)  
‡ “Õ“°“»‰øø“Õµ‚π¡µ À“°¡ (¢π“¥ ß ¥ 250 mA)  
Blue with white stripe  
π”‡ßπ≈“¬¢“«  
To the remote lead of other equipment (200 mA max.)  
µÕ‡¢“°∫Õª°√≥Õπ (¢π“¥ ß ¥ 200 mA)  
Brown  
𔵓≈  
To cellular phone system  
µÕ°∫‚∑√»æ∑‡§≈Õπ∑  
Light green  
‡¢¬«ÕÕπ  
To parking brake, metallic body or chassis of the car  
µÕ°∫‡∫√°¡Õ µ«∂ß∑‡ªπ‚≈À– À√Õ‚§√ß√∂¬πµ  
White with black stripe  
Gray with black stripe  
Gray  
Green with black stripe  
Green  
Purple with black stripe  
Purple  
White  
¢“«·∂∫¥”  
‡∑“·∂∫¥”  
‡∑“  
‡¢¬«·∂∫¥”  
‡¢¬«  
¡«ß·∂∫¥”  
¡«ß  
¢“«  
Left speaker (front)  
Right speaker (front)  
Left speaker (rear)  
Right speaker (rear)  
≈”‚æß´“¬ (Àπ“)  
≈”‚æߢ«“ (Àπ“)  
≈”‚æß´“¬ (À≈ß)  
≈”‚æߢ«“ (À≈ß)  
B
Connecting the parking brake wire / µÕ “¬‡∫√°¡Õ  
When installing the monitor in a location where it can be seen by the driver  
Connect the parking brake wire to the parking brake system built in the car.  
¡Õ®–µ¥µß®Õ¡Õπ‡µÕπµ”·Àπß∑º¢∫ “¡“√∂¡Õ߇Àπ‰¥  
When installing the monitor in a location where it cannot be  
seen by the driver  
Connect the parking brake wire to metallic body or chassis of the car.  
‡¡Õ®–µ¥µß®Õ¡Õπ‡µÕπµ”·Àπß∑º¢∫‰¡ “¡“√∂¡Õ߇Àπ‰¥  
µÕ “¬‡∫√°¡Õ°∫µ«∂ß∑‡ªπ‚≈À–À√Õ‚§√ß√∂¬πµ  
µÕ “¬‡∫√°¡Õ°∫√–∫∫‡∫√°¡Õ¢Õß√∂¬πµ  
Parking brake wire (light green)  
“¬‡∫√°¡Õ ( ‡¢¬«ÕÕπ)  
Parking brake  
‡∫√°¡Õ  
Parking brake wire (light green)  
“¬‡∫√°¡Õ ( ‡¢¬«ÕÕπ)  
To metallic body or chassis of the car  
µÕ°∫‚§√ß‚≈À–À√Õ‡™´ ¢Õß√∂¬πµ  
Parking brake switch (inside the car)  
«µ™‡∫√°¡Õ (¿“¬„π√∂)  
C
Connecting the crimp connector / «∏µÕ¢«µÕ ”À√∫Àπ∫  
Wire connecting the battery and the parking brake switch.  
Contact the metallic part of the crimp to the wires inside.  
„À «π∑‡ªπ‚≈À–¢Õßµ«Àπ∫ ¡º °∫ “¬¢“ß„π  
“¬∑µÕ°∫·∫µ‡µÕ√·≈– «µ™‡∫√°¡Õ  
Pinch the crimp firmly.  
Àπ∫„À·ππ  
Attach the parking brake wire to this point.  
Õ “¬‡∫√°¡Õ∑®¥π  
1
*1 ‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π  
*
*
Not supplied for this unit.  
2
Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power  
cannot be turned on.  
2
*
°Õπ°“√µ√«® Õ∫°“√∑”ß“π¢Õß™¥ª√–°Õ∫π°Õπ∑®–µ¥µß µÕßµÕ “¬µ–°«π°Õπ ¡©–ππ®–‰¡ “¡“√∂‡ª¥‡§√Õ߉¥  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the monitor / °“√µÕ®Õ¿“æ  
D
Video cord*3  
“¬«¥‚Õ*3  
or / À√Õ  
Rear side  
¥â“πÀ≈ß  
KV-MR9010  
9-INCH WIDESCREEN MONITOR*3  
¡Õπ‡µÕ√ ®Õ°«“ß 9 π«*3  
E
Connecting the external amplifier / °“√µÕ‡æ¡‡µ¡‡¢“°∫Õª°√≥ÕπÊ  
You can connect an amplifier to upgrade your car stereo system.  
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it  
can be controlled through this unit.  
§≥“¡“√∂µÕ°∫·Õ¡æ≈ø“¬‡ÕÕ√ · –Õª°√≥Õπʉ¥ ‡æՇ桧≥ ¿“æ‡ ¬ß„À°∫√–∫∫ ‡µÕ√‚Õ¢Õß√∂¬πµ  
µÕ “¬µ–°«√–¬–‰°≈ ( π”‡ßπ≈“¬¢“«) ‡¢“°∫ “¬µ–°«√–¬–‰°≈¢ÕßÕª°√≥Õπ Ê ‡æÕ®– “¡“√∂§«∫§¡‚¥¬™¥ª√–  
°Õ∫π‰¥  
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker  
leads of this unit unused.  
∂Õ¥≈”‚æßÕÕ°®“°™¥ª√–°Õ∫π ·≈«µÕ‡¢“°∫‡§√Õߢ¬“¬ ∑ß “¬µ–°«≈”‚æߢÕß™¥ª√–°Õ∫π‰«  
Y-connector*3  
¢ÕµÕ√ªµ« Y*3  
Remote lead  
“¬µ–°«•–¬–‰°•  
Remote lead (blue with white stripe)  
“¬µ–°«•–¬–‰°• ( π”‡ßπ≈“¬¢“«)  
Rear speakers  
≈”‚æßÀ≈ß  
To the remote lead of other equipment or  
automatic antenna if any  
µÕ “¬°∫Õª°√≥ÕπÀ√Õ‡ “Õ“°“»Õµ‚π¡µ∂“¡  
JVC Amplifier  
‡§√Õߢ¬“¬‡ ¬ß JVC  
Front speakers  
≈”‚æßÀπ“  
F
Connecting the external components / °“√µÕ‡æ¡‡µ¡‡¢“°∫Õª°√≥ÕπÊ  
JVC CD changer, Apple iPod, or JVC D. player / JVC CD ‡™π‡®Õ√, Apple iPod À√Õ‡§√Õ߇≈π JVC D.  
Set “CHANGER” for the external input setting (See page 16 of the INSTRUCTIONS.) / µß§“ “CHANGER” ‡ªπ°“√§“√∫ ≠≠“≥Õª°√≥¿“¬πÕ° (¥Àπ“ 16 §”·π–π”)  
You can connect these components as illustrated below. The iPod or D. player can be connected using  
an interface adapter (not supplied)—KS-PD100 (for iPod) or KS-PD500 (for D. player).  
∑“π “¡“√∂µÕÕª°√≥¥ß°≈“«µ“¡¿“æ· ¥ß¥“π≈“ß ∑“π “¡“√∂‡™Õ¡µÕ iPod À√Õ‡§√Õ߇≈π D. ‚¥¬„™Õπ‡∑Õ√‡ø Õ–  
·¥ª‡µÕ√ (‰¡¡¡“„À)—KS-PD100 ( ”À√∫ iPod) À√Õ KS-PD500 ( ”À√∫‡§√Õ߇≈π D.)  
CAUTION  
:
¢Õ§«√√–«ß  
:
Before connecting the external components, make sure that the unit is turned off.  
°Õπ®–‡™Õ¡µÕ°∫Õª°√≥¿“¬πÕ° °√≥“µ√«® Õ∫„À·π„®«“ªî¥‡§√ÕßÕ¬  
JVC CD changer  
JVC CD ‡™π‡®Õ√  
CD changer jack  
or / À√Õ  
™Õ߇ ¬∫µÕ¢Õ߇§√Õ߇≈π CD  
Apple iPod  
Apple iPod  
or /À√Õ  
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.  
iPod ‡ªπ‡§√ÕßÀ¡“¬°“√§“¢Õß Apple Computer, Inc. ´ß®¥∑–‡∫¬π°“√§“„π  
ª‡∑ » À√∞Õ‡¡√°“·≈–ª√–‡∑»ÕπÊ  
JVC D. player  
‡§√Õ߇≈π JVC D.  
Other external component / Õª°√≥¿“¬πÕ°ÕπÊ  
Set “EXT IN” for the external input setting (See page 16 of the INSTRUCTIONS.) / µß§“ EXT IN”  
‡∫ªπ°“√§“√∫ ≠≠“≥Õª°√≥¿“¬πÕ° (¥Àπ“ 16 §”·π–π”)  
External component  
External component  
Õª°√≥¿“¬πÕ°  
Õª°√≥¿“¬πÕ°  
CD changer jack  
™Õ߇ ¬∫µÕ¢Õß  
‡§√Õ߇≈π CD  
3.5 mm stereo mini plug  
¢«‡ ¬∫¡π ‡µÕ√‚Õ¢π“¥ 3.5 ¡¡.  
or  
À√Õ  
External component  
Õª°√≥¿“¬πÕ°  
3
4
5
*3 ‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π  
*
*
*
Not supplied for this unit.  
Signal cord (not supplied for this unit).  
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint  
(if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the  
unit.  
Connecting cord supplied for your CD changer.  
Line Input Adapter KS-U57 (not supplied for this unit).  
AUX Input Adapter KS-U58 (not supplied for this unit).  
*4 “¬‡§‡∫≈ ≠≠“≥ (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)  
5
*
µÕ≈«¥ “¬¥π„À·ππ‡¢“°∫µ«∂߇À≈° À√Õµ«∂ß√∂  
µ√ß «π ∑‰¡¡ ‡§≈Õ∫ (À“°¡ ‡§≈Õ∫Õ¬ „À¢¥ ÕÕ°°Õπ  
°ÕπµÕ≈«¥ “¬¥π) À“°‰¡ªØ∫µµ“¡§”·π–π”𠇧√ÕßÕ“®™”√¥ À√Õ‡ ¬À“¬‰¥  
*6 µÕ “¬∑„À¡“ ”À√∫ CD ‡™π‡®Õ√  
6
7
8
*
*
*
*7 Õ·¥ª‡µÕ√ “¬ ≠≠“≥‡¢“ KS-U57 (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)  
*8 Õ–·¥ª‡µÕ√√∫ ≠≠“≥ AUX √π KS-U58 (‰¡‰¥„À¡“°∫™¥ª√–°Õ∫π)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCD/CD RECEIVER  
KD-SV3305  
KD-SV3305  
ALAT PENERIMA VCD/CD  
For canceling the display demonstration, see page 7.  
Untuk membatalkan tampilan demonstrasi, lihat halaman 7.  
For installation and connections, refer to the separate manual.  
Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.  
INSTRUCTIONS  
BUKU PETUNJUK  
GET0471-007A  
[UN]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing a JVC product.  
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best  
possible performance from the unit.  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to  
qualified service personnel.  
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical  
instruments.  
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.  
WARNINGS:  
To prevent accidents and damage  
[European Union only]  
• DO NOT install any unit in locations where;  
– it may obstruct the steering wheel and  
gearshift lever operations.  
– it may obstruct the operation of safety  
devices such as air bags.  
How to reset your unit  
– it may obstruct visibility.  
• DO NOT operate the unit while driving.  
• If you need to operate the unit while  
driving, be sure to look ahead carefully.  
• The driver must not watch the monitor  
while driving.  
If the parking brake is not engaged,  
Your preset adjustments will also be erased.  
“PARKING” flashes on the display, and  
no playback picture will be shown on the  
monitor.  
How to forcibly eject a disc  
– This warning appears only when the  
parking brake wire is connected to the  
parking brake system built in the car  
(refer to the Installation/Connection  
Manual).  
Be careful not to drop the disc when it ejects.  
If this does not work, reset your unit.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
The following marks are used to indicate...  
: Built-in VCD/CD player operations.  
: External CD changer operations.  
CONTENTS  
Control panel ..................................  
Remote controller—RM-RK120.............  
4
5
: Indicator displayed for the  
corresponding operation.  
Getting started................................  
Basic operations...................................................  
7
7
How to use the MODE button  
If you press MODE, the unit goes into functions mode,  
then the number buttons (except “1” and “4”) and  
Radio operations .............................  
8
Disc operations................................  
Playing a disc in the unit .....................................  
9
9
4
/¢ buttons work as different function  
buttons.  
Playing discs in the CD changer ........................... 10  
Sound adjustments.......................... 14  
General settings—PSM ................... 15  
iPod/D. player operations................. 17  
Ex.: When number button 2 works as  
MO (monaural) button.  
Other external component  
operations ................................... 19  
To use these buttons for their original functions  
again after pressing MODE, wait for 5 seconds  
without pressing any of these buttons until the  
functions mode is cleared or press MODE again.  
Maintenance ................................... 19  
More about this unit ........................ 20  
Troubleshooting.............................. 23  
Specifications.................................. 25  
Detaching the control panel  
For safety...  
• Do not raise the volume level too much, as this will  
block outside sounds, making driving dangerous.  
• Stop the car before performing any complicated  
operations.  
Temperature inside the car...  
Attaching the control panel  
If you have parked the car for a long time in hot or cold  
weather, wait until the temperature in the car becomes  
normal before operating the unit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control panel  
Parts identification  
Display window  
1 4 /¢ buttons  
i
o
;
DISP (display) button  
2
(standby/on attenuator) button  
(control panel release) button  
Disc information indicators—TAG (ID3 Tag),  
(folder), (track/file)  
Disc type indicators—WMA, MP3  
Playback source indicators—  
3
Remote sensor  
DO NOT expose the remote sensor to strong light  
(direct sunlight or artificial lighting).  
Loading slot  
a
s
4
5
Display window  
CH: Lights up only when CD-CH is selected as the  
playback source.  
6 0 (eject) button  
7
8
9
EQ (equalizer) button  
SRC (source) button  
BAND button  
6 (play/pause) button  
Control dial  
DISC: Lights up for the built-in CD player.  
Playback mode / item indicators— RND (random),  
(disc), (folder), RPT (repeat)  
LOUD (loudness) indicator  
d
f
g
h
p
q
w
e
r
t
y
u
EQ (equalizer) indicator  
SEL (select) button  
Sound mode (C-EQ: custom equalizer) indicators—  
JAZZ, CLASSIC, HIP HOP, POPS, ROCK, USER  
Tr (track) indicator  
Source display / Volume level indicator  
Main display  
MO (monaural) button  
SSM (Strong-station Sequential Memory) button  
Number buttons  
RPT (repeat) button  
RND (random) button  
MODE button  
j
k
l
/
Tuner reception indicators—ST (stereo),  
MO (monaural)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main elements and features  
Remote controller—  
RM-RK120  
Installing the lithium coin battery  
(CR2025)  
Aim the remote controller directly at the remote  
sensor on the unit. Make sure there is no obstacle  
in between.  
Warning:  
• Do not install any battery other than CR2025 or  
its equivalent; otherwise, it may explode.  
• Do not leave the remote controller in a place  
(such as dashboards) exposed to direct sunlight  
for a long time; otherwise, it may explode.  
• Store the battery in a place where children  
cannot reach to avoid risk of accident.  
• To prevent the battery from over-heating,  
cracking, or starting a fire:  
– Do not recharge, short, disassemble, heat the  
battery, or dispose of it in a fire.  
– Do not leave the battery with other metallic  
materials.  
1
2
SOURCE button  
• Selects the playback source.  
(standby/on attenuator) button  
• Turns the power on if pressed briefly or  
attenuates the sound when the power is on.  
• Turns the power off if pressed and held.  
3 2 REV (reverse) / FWD (forward) 3 buttons  
• Searches for stations if pressed briefly.  
• Fast-forwards or reverses the track if pressed and  
held.  
– Do not poke the battery with tweezers or similar  
tools.  
– Wrap the battery with tape and insulate when  
throwing away or saving it.  
• Changes the tracks if pressed briefly.  
• While listening to an Apple iPod or a JVC  
D. player (in menu selecting mode):  
– Selects an item if pressed briefly. (Then, press  
DOWN to confirm the selection.)  
– Skips 10 items at a time if pressed and held.  
Continued on the next page  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
5
VOL. + / – buttons  
• Adjusts the volume level.  
ENTER and number buttons  
9
p
PBC (Playback Control) button  
• Activates or deactivates the PBC function.  
RETURN button  
• Selects a track/file directly.  
• Returns to the previous menu while playing a  
VCD in PBC function.  
OSD (On-Screen Display) button  
• Turn on and off the OSD on the monitor.  
AUDIO button  
– Press the number button(s), then press ENTER.  
– Not used for iPod/D. player operations.  
• Selects an item from the menu while playing  
back a Video CD (VCD) in Playback Control (PBC)  
function.  
q
w
• Selects the audio channel for VCD playback.  
– Press the number button(s), then press ENTER.  
• Selects the discs while operating the CD changer.  
– To select disc number 1 – 6, press number  
button 1 – 6 briefly.  
* 5 UP  
: Returns to the previous menu.  
DOWN : Confirms the selection.  
– To select disc number 7 – 12, press and hold  
number button 1 (7) – 6 (12).  
6
7
EQ (equalizer) button  
• Selects the sound mode (C-EQ: custom  
equalizer).  
BAND 6 button  
• Changes the FM/AM bands.  
• Stops disc playback temporarily. To resume  
playback, press the button again.  
– While playing a VCD, the playback scene at the  
moment stops and remain still.  
– Not used for CD changer, iPod, or D. player  
operations.  
8 5 UP / DOWN buttons  
• Changes the preset stations.  
• Changes the folder of the MP3/WMA discs if  
pressed briefly.  
• Changes the disc while operating the CD changer  
if pressed and held.  
• While listening to an iPod or a D. player:  
– Pauses/stops or resumes playback with  
DOWN .  
– Enters the main menu with 5 UP.  
(Now 5 UP / DOWN /2 REV / FWD 3 work  
as the menu selecting buttons.)*  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
To drop the volume in a  
moment (ATT)  
To restore the sound, press the  
button again.  
Getting started  
Basic operations  
To turn off the power  
~ Turn on the power.  
Ÿ
Basic settings  
• See also “General settings — PSM” on pages 15 and  
16.  
1
2
* You cannot select these sources if they are not  
ready or not connected.  
! For FM/AM tuner  
1 Canceling the display demonstrations  
Select “DEMO,” then “DEMO OFF.”  
2 Setting the clock  
Select “CLOCK H” (hour), then adjust the hour.  
Select “CLOCK M” (minute), then adjust the  
minute.  
Adjust the volume.  
3
Finish the procedure.  
Volume level appears.  
To check the current clock time while the  
power is turned off  
@ Adjust the sound as you want. (See  
page 14.)  
Caution on volume setting:  
Discs produce very little noise compared with other  
sources. Lower the volume before playing a disc  
to avoid damaging the speakers by the sudden  
increase of the output level.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
When an FM stereo broadcast is hard to  
receive  
Radio operations  
~
Ÿ
Lights up when monaural mode is activated.  
Reception improves, but stereo effect will be lost.  
To restore the stereo effect, repeat the same  
procedure. “MONO OFF” appears and the MO indicator  
goes off.  
Lights up when receiving an FM stereo  
broadcast with sufficient signal strength.  
! Start searching for a station.  
Storing stations in memory  
You can preset six stations for each band.  
When a station is received, searching stops.  
To stop searching, press the same button  
again.  
FM station automatic presetting—  
SSM (Strong-station Sequential  
Memory)  
1
Select the FM band (FM1 – FM3) you want to  
store into.  
To tune in to a station manually  
In step ! above...  
1
2
3
2
Select a desired station frequency.  
“SSM” flashes, then disappears when automatic  
presetting is over.  
Local FM stations with the strongest signals are  
searched and stored automatically in the FM band.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual presetting  
Ex.: Storing FM station of 92.5 MHz into preset number  
4 of the FM1 band.  
Disc operations  
Playing a disc in the unit  
1
2
All tracks will be played repeatedly until you change the  
source or eject the disc.  
• If a disc menu appears on the monitor while playing a  
VCD with PBC, see page 11.  
3
Preset number flashes for a while.  
Before performing any operations, make sure the  
following....  
• Turn on the monitor and select the appropriate  
monitor input before playing a VCD.  
• If you turn on the monitor, you can also control the  
MP3/WMA playback by referring to the monitor  
screen (see page 12).  
Listening to a preset station  
1
2
Select the preset station (1 – 6) you want.  
• Select the video system suitable for your monitor (see  
page 16).  
To stop play temporarily  
To resume playback, press the  
button again.  
To check the other information while  
listening to the radio  
To stop play and eject the  
disc  
Clock Ô Frequency  
Continued on the next page  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
To fast-forward or reverse the track  
To go to the next or previous tracks  
Playing discs in the CD changer  
All discs in the magazine will be played repeatedly until  
you change the source.  
• Ejecting the magazine will also stop playing.  
~
* If you have changed the external input setting  
to “EXT IN” (see page 16), you cannot select the  
CD changer.  
To go to the next or previous folders (only for  
MP3 or WMA discs)  
Ÿ Select a disc.  
For disc number from 01 – 06:  
For MP3 discs:  
For WMA discs:  
1
For disc number from 07 – 12:  
2
About MP3 and WMA discs  
MP3 and WMA “tracks” (words “file” and “track” are  
used interchangeably) are recorded in “folders.”  
To locate a particular track (for CD or VCD  
with PBC set to “PBC OFF”) or folder (for MP3  
or WMA discs) directly  
To select a number from 01 – 06:  
About the CD changer  
It is recommended to use a JVC MP3-compatible CD  
changer with your unit.  
• You can also connect MP3-incompatible CD changers.  
However, these units are not compatible with MP3  
discs.  
To select a number from 07 – 12:  
• You cannot use the CH-X99, CH-X100, and KD-MK  
series CD changers with this unit.  
• You cannot control and play any WMA or VCD disc in  
the CD changer.  
• Disc text information recorded in the CD Text can be  
displayed when a JVC CD Text compatible CD changer  
is connected.  
• For connection, see Installation/Connection Manual  
(separate volume).  
• To use direct folder access on MP3/WMA discs, it  
is required that folders are assigned with 2-digit  
numbers at the beginning of their folder names—  
01, 02, 03, and so on.  
To select a particular track in a folder  
(for MP3 or WMA discs):  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Control (PBC) operations  
On-Screen (OSD) information  
This operation is only possible when using the  
remote controller.  
This operation is only possible when using the  
remote controller.  
1
While playing a VCD....  
PBC ON Ô PBC OFF  
You can check the track number and elapsed playing  
time if the monitor is turned on.  
While playing a disc....  
• To turn off the On-Screen Display,  
press the button again.  
PBC ON : A menu appears on the monitor.  
PBC OFF: Cancels.  
Current/total track number  
Elapsed playing time  
• A menu may be a list of items, submenus, or  
some moving pictures.  
2
Select the item you want.  
Selecting the audio channel  
This operation is only possible when using the  
remote controller.  
• To select an item from the submenus, repeat this  
step.  
You can select the audio channel to play. (This is  
convenient when playing a Karaoke VCD.)  
The selected item starts playback automatically.  
To correct a mis-entry and to return to the  
previous menu  
STEREO : To listen to normal stereo (left/right)  
playback.  
MONO L : To listen to the L (left) audio channel.  
MONO R : To listen to the R (right) audio channel.  
• The audio channel is automatically set to “STEREO”  
when you change the disc or source.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select a folder  
To select a track  
MP3/WMA control screen operations  
You can also control the playback of an MP3/WMA disc  
by referring to the monitor.  
• The control screen automatically appears on the  
monitor when you insert an MP3/WMA disc.  
• Pressing these buttons repeatedly can also select  
tracks from the previous/next folders.  
• See also page 10 for using the buttons on the control  
panel to select a folder or track.  
Selecting the playback modes  
You can use only one of the following playback modes  
at a time.  
• For VCD: While PBC (see page 11) is not in use.  
1
2
Artiste name* (only for MP3 discs)  
• The artiste name will scroll on the monitor if it  
cannot be shown at a time.  
Operation mode—PLAY, PAUSE, FF (fast-forward),  
FR (fast-reverse), SELECT (selected track number),  
REPEAT TRACK, REPEAT FOLDER, REPEAT OFF,  
RANDOM FOLDER, RANDOM DISC, RANDOM OFF  
• Operation mode appears for a while on the  
monitor.  
1
2
Select your desired playback mode.  
Repeat play  
7
3
4
Folder name*  
Track title* (only for MP3 discs)  
• The track title will scroll on the monitor if it  
cannot be shown at a time.  
Mode  
Plays repeatedly  
TRK RPT : The current track.  
5
6
Highlighted bar for the current file name*  
OSD indication—Current/total track number,  
Elapsed playing time  
• Appears only if you turn on the OSD (see page  
11).  
FLDR RPT*1: All tracks of the current folder.  
DISC RPT*2 : All tracks of the current disc.  
RPT OFF : Cancels.  
7
8
Current list/total list number  
Track list  
• The monitor can show 12 tracks at a time and a  
maximum of 239 tracks for a disc.  
* Some symbols will not be shown (and will be  
substituted or blanked) on the control screen.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• For MP3 disc : When “TAG DISP” is set to “TAG OFF”  
• For WMA disc :  
7
Random play  
Mode  
Plays at random  
FLDR RND*1 : All tracks of the current folder,  
then tracks of the next folder and  
so on.  
: Clock with the current track number  
: Elapsed playing time with the current track  
number  
DISC RND : All tracks of the current disc.  
MAG RND*2 : All tracks of the inserted discs.  
1
*
If the current disc is an audio CD or a VCD, “NO NAME”  
appears.  
Only for the built-in CD player.  
If an MP3 file does not have Tag information, folder  
name and file name appear. In this case, the TAG  
indicator will not light up.  
RND OFF  
: Cancels.  
2
3
*
*
1
*
*
Only while playing an MP3 or a WMA disc.  
Only while playing discs in the CD changer.  
2
Other main functions  
Prohibiting disc ejection  
You can lock a disc in the loading slot.  
Changing the display information  
While playing an audio CD, a CD Text, or a VCD  
with PBC set to “PBC OFF” (see page 11)  
To cancel the prohibition, repeat the same  
procedure.  
While playing an MP3 or a WMA*2 disc  
• Only for MP3 disc : When “TAG DISP” is set to  
“TAG ON” (see page 16)  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the sound  
Sound adjustments  
You can select a preset sound mode suitable to the  
music genre (C-EQ: custom equalizer).  
You can adjust the sound characteristics to your  
preference.  
1
2
Preset values  
BAS  
TRE  
LOUD  
(bass) (treble) (loudness)  
Indication (For)  
USER  
(Flat sound)  
00  
+03 +01  
+01 –02  
+04 +01  
+02 00  
+02 +03  
00  
OFF  
ON  
Indication [Range]  
ROCK  
(Rock or disco music)  
BAS*1 (bass)  
Adjust the bass. [–06 to +06]  
CLASSIC  
(Classical music)  
OFF  
OFF  
ON  
TRE*1 (treble)  
Adjust the treble. [–06 to +06]  
POPS  
(Light music)  
FAD*2 (fader)  
Adjust the front and rear speaker balance. [R06 to F06]  
HIP HOP  
(Funk or rap music)  
BAL (balance)  
Adjust the left and right speaker balance.  
[L06 to R06]  
JAZZ  
(Jazz music)  
OFF  
LOUD*1 (loudness)  
Boost low and high frequencies to produce a well-  
balanced sound at low volume level.  
[LOUD ON or LOUD OFF]  
VOL (volume)  
Adjust the volume. [00 to 30 or 50*3]  
1
*
When you adjust the bass, treble, or loudness, the  
adjustment you have made is stored for the currently  
selected sound mode (C-EQ) including “USER.”  
If you are using a two-speaker system, set the fader  
level to “00.”  
2
3
*
*
Depending on the amplifier gain control setting. (See  
page 16 for details.)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General settings — PSM  
You can change PSM (Preferred Setting Mode) items listed in the table that follows.  
1
4
Repeat steps 2 and 3 to adjust other PSM  
items if necessary.  
2
Select a PSM item.  
5
Finish the procedure.  
3
Adjust the PSM item selected.  
Indications  
DEMO  
Item  
Setting, [reference page]  
(
: Initial)  
DEMO ON  
:
:
Display demonstration will be activated automatically if no  
operation is done for about 20 seconds, [7].  
Cancels.  
Display demonstration  
DEMO OFF  
CLOCK H  
1 – 12  
[Initial: 1 (1:00)], [7]  
Hour adjustment  
CLOCK M  
00 – 59  
[Initial: 00 (1:00)], [7]  
Minute adjustment  
DIMMER  
Dimmer  
ON  
OFF  
:
:
Dims the display illumination of this unit.  
Cancels.  
TEL  
MUTING 1/  
MUTING 2:  
OFF  
:
:
Select either one which mutes the sounds while using a cellular  
phone.  
Cancels.  
Telephone muting  
Continued on the next page  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indications  
Item  
Setting, [reference page]  
(
: Initial)  
SCROLL *1  
Scroll  
ONCE  
AUTO  
OFF  
:
:
:
Scrolls the track information once.  
Repeats scrolling (at 5-second intervals).  
Cancels.  
• Pressing DISP for more than one second can scroll the display  
regardless of the setting.  
TAG DISP  
Tag display  
TAG ON  
TAG OFF  
:
:
Shows the Tag information while playing MP3 tracks, [13].  
Cancels.  
AMP GAIN  
Amplifier gain control  
LOW PWR  
HIGH PWR  
:
:
VOL 00 – VOL 30 (Select this if the maximum power of the speaker  
is less than 50 W to prevent damaging the speaker.)  
VOL 00 – VOL 50  
VIDEO  
Video system  
PAL  
NTSC  
:
:
Select this if your monitor is of the PAL color system.  
Select this if your monitor is of the NTSC color system.  
• Press SEL to activate the selection before you select the other PSM  
items to adjust.  
EXT IN *2  
External input  
CHANGER  
EXT IN  
:
:
To use a JVC CD changer, [10], an Apple iPod or a JVC D. player,  
[17].  
To use any other external component than the above, [19].  
1
*
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display.  
Displayed only when one of the following sources is selected—FM, AM, DISC, or LINE IN.  
2
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To pause*1 or stop*2 playback  
iPod/D. player operations  
This unit is ready for operating an Apple iPod or a JVC  
D. player from the control panel.  
To resume playback, press 4 after pressing  
MODE.  
Before operating your iPod or D. player:  
Connect either one of the following (separately  
purchased) to the CD changer jack on the rear of this  
unit.  
Interface adapter for iPod—KS-PD100 for  
controlling an iPod.  
To fast-forward or reverse the track  
To go to the next or previous tracks  
D. player interface adapter—KS-PD500 for  
controlling a D. player.  
• For connection, see Installation/Connection Manual  
(separate volume).  
• For details, refer also to the manual supplied with the  
interface adapter.  
1
*
*
For iPod  
For D. player  
2
Preparations:  
Make sure “CHANGER” is selected for the external input  
setting, see page 16.  
~
Ÿ
Playback starts automatically from where it has  
been paused*1 or stopped*2 previously.  
! Adjust the volume.  
Adjust the sound as you want. (See  
page 14.)  
Continued on the next page  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting a track from the menu  
Selecting the playback modes  
1
2
1
2
Enter the main menu.  
Select your desired playback mode.  
Now the 4 /¢ buttons  
work as the menu selecting buttons*.  
7
Repeat play  
3
Select the desired menu.  
ONE RPT  
Functions the same as “Repeat One” of the iPod or  
“Repeat Mode = One” for the D. player.  
ALL RPT  
For iPod:  
Functions the same as “Repeat All” of the iPod or  
“Repeat Mode = All” for the D. player.  
PLAYLIST Ô ARTISTS Ô ALBUMS Ô  
SONGS Ô GENRES Ô COMPOSER Ô  
(back to the beginning)  
RPT OFF  
Cancels.  
For D. player:  
7
Random play  
PLAYLIST Ô ARTIST Ô ALBUM Ô  
GENRE Ô TRACK Ô (back to the  
beginning)  
ALBM RND*  
Functions the same as “Shuffle Albums” of the  
iPod.  
4
Confirm the selection.  
SONG RND/RND ON  
Functions the same as “Shuffle Songs” of the iPod  
or “Random Play = On” of the D. player.  
To move back to the previous menu, press ¢  
after pressing MODE.  
RND OFF  
• If a track is selected, playback starts  
automatically.  
• If the selected item has another layer, you will  
enter the layer. Repeat steps 3 and 4 until the  
desired track is played.  
Cancels.  
* For iPod: Functions only if you select “ALL” in  
“ALBUMS” of the main “MENU.”  
• Holding 4 /¢ can skip 10 items at  
a time.  
To check the other information while  
listening to an iPod or a D. player  
* The menu selecting mode will be canceled:  
If no operations are done for about 5 seconds.  
When you confirm the selection of a track.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other external component Maintenance  
operations  
How to clean the connectors  
Frequent detachment will deteriorate the connectors.  
To minimize this possibility, periodically wipe the  
connectors with a cotton swab or cloth moistened with  
alcohol, being careful not to damage the connectors.  
You can connect an external component to the LINE IN  
plugs on the rear, and another to the CD changer jack  
on the rear using the Line Input Adapter—KS-U57  
(not supplied) or AUX Input Adapter—KS-U58 (not  
supplied).  
• For connection, see Installation/Connection Manual  
(separate volume).  
• For listening to the iPod or D. player, refer to pages  
17 and 18.  
Connector  
Moisture condensation  
Moisture may condense on the lens inside the unit in  
the following cases:  
• After starting the heater in the car.  
~
• If it becomes very humid inside the car.  
Should this occur, the unit may malfunction. In this  
case, eject the disc and leave the unit turned on for a  
few hours until the moisture evaporates.  
If “EXT IN” does not appear, see page 16 and  
select the external input (“EXT IN”).  
Ÿ Turn on the connected component and  
start playing the source.  
How to handle discs  
When removing a disc from its  
case, press down the center holder of  
the case and lift the disc out, holding  
it by the edges.  
Center holder  
! Adjust the volume.  
• Always hold the disc by the edges. Do not touch its  
recording surface.  
When storing a disc into its case, gently insert the  
disc around the center holder (with the printed surface  
facing up).  
Adjust the sound as you want. (See  
page 14.)  
• Make sure to store discs into the cases after use.  
To check the other information while  
listening to an external component  
Clock Ô EXT IN or LINE IN  
Continued on the next page  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To keep discs clean  
More about this unit  
A dirty disc may not play correctly.  
If a disc does become dirty, wipe it with  
a soft cloth in a straight line from center  
to edge.  
Basic operations  
Turning on the power  
• Do not use any solvent (for example, conventional  
record cleaner, spray, thinner, benzine, etc.) to clean  
discs.  
• By pressing SRC on the unit, you can also turn on the  
power. If the source is ready, playback also starts.  
Turning off the power  
To play new discs  
• If you turn off the power while listening to a disc, disc  
play will start from where playback has been stopped  
previously, next time you turn on the power.  
• For MP3/WMA discs, playback will start from the  
beginning of the last playing track.  
New discs may have some rough spots  
around the inner and outer edges. If  
such a disc is used, this unit may reject  
the disc.  
To remove these rough spots, rub the edges with a  
pencil or ball-point pen, etc.  
Tuner operations  
Storing stations in memory  
• During SSM search...  
– All previously stored stations are erased and  
stations are stored newly.  
– Received stations are preset in No. 1 (lowest  
frequency) to No. 6 (highest frequency).  
– When SSM is over, the station stored in No. 1 will  
be automatically tuned in.  
Do not use the following discs:  
Warped disc  
Sticker  
Sticker residue  
• When storing a station manually, the previously  
preset station is erased when a new station is stored  
in the same preset number.  
Stick-on label  
Disc operations  
Unusual shape  
Caution for DualDisc playback  
• The Non-DVD side of a “DualDisc” does not comply  
with the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
Single CD (8 cm disc)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General  
Playing a VCD disc  
• This unit has been designed to reproduce CDs/CD  
Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable)  
in audio CD (CD-DA), MP3 and WMA formats.  
• This unit cannot playback SVCD, DVDs, CD-Gs, or CD-I  
discs.  
• The PBC function is not available for some VCDs.  
• The PBC function is automatically canceled when you  
change the source or turn off the unit. Playback starts  
from the beginning of the dics when you play the  
VCD again.  
• When a disc is inserted upside down, the disc  
automatically ejects.  
• While fast-forwarding or reversing on an MP3 or  
WMA disc, you can only hear intermittent sounds.  
• The On-Screen Display (OSD) will automatically  
canceled when you change the source or turn off the  
unit.  
Playing an MP3/WMA disc  
Playing a CD-R or CD-RW  
• This unit can play back MP3/WMA files with the  
extension code <.mp3> or <.wma> (regardless of  
the letter case—upper/lower).  
• This unit can show the names of albums, artists  
(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or  
2.4) for MP3 files.  
• This unit can display only one-byte characters. No  
other characters can be correctly displayed.  
• This unit can play back MP3/WMA files meeting the  
conditions below:  
• Use only “finalized” CD-Rs or CD-RWs.  
• This unit can play back only files of the same type  
which are first detected if a disc includes both audio  
CD (CD-DA) files and MP3/WMA files.  
• This unit can play back multi-session discs; however,  
unclosed sessions will be skipped while playing.  
• Some CD-Rs or CD-RWs may not play back on this  
unit because of their disc characteristics, or for the  
following reasons:  
– Discs are dirty or scratched.  
– Moisture condensation occurs on the lens inside  
the unit.  
– Bit rate: MP3: 32 kbps — 320 kbps  
WMA: 48 kbps — 192 kbps  
– Sampling frequency:  
– The pickup lens inside the unit is dirty.  
– CD-R/CD-RW on which the files are written with  
“Packet Write” method.  
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)  
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)  
48 kHz, 44.1 kHz, 32 kHz (for WMA)  
– There are improper recording conditions (missing  
data, etc.) or media conditions (stained, scratched,  
warped, etc.).  
• CD-RWs may require a longer readout time since the  
reflectance of CD-RWs is lower than that of regular  
CDs.  
• Do not use the following CD-Rs or CD-RWs:  
– Discs with stickers, labels, or a protective seal stuck  
to the surface.  
– Disc format: ISO 9660 Level 1/Level 2, Romeo,  
Joliet, Windows long file name  
• The maximum number of characters for file/folder  
names vary among the disc format used (includes 4  
extension characters—<.mp3> or <.wma>).  
– ISO 9660 Level 1: up to 12 characters  
– ISO 9660 Level 2: up to 31 characters  
– Romeo: up to 40 characters  
– Joliet: up to 40 characters  
– Discs on which labels can be directly printed by an  
ink jet printer.  
– Windows long file name: up to 40 characters  
Using these discs under high temperatures or high  
humidities may cause malfunctions or damage to the  
unit.  
Continued on the next page  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• This unit can play back files recorded in VBR (variable  
bit rate).  
General settings—PSM  
• If you change the “AMP GAIN” setting from  
“HIGH PWR” to “LOW PWR” while the volume level  
is set higher than “VOL 30,” the unit automatically  
changes the volume level to “VOL 30.”  
Files recorded in VBR have a discrepancy in elapsed  
time display, and do not show the actual elapsed  
time. Especially, after performing the search function,  
this difference becomes noticeable.  
• This unit can recognize a total of 512 files, of 200  
folders, and of 8 hierarchies.  
• This unit cannot play back the following files:  
– MP3 files encoded with MP3i and MP3 PRO format.  
– MP3 files encoded in an inappropriate format.  
– MP3 files encoded with Layer 1.  
– WMA files encoded with lossless, professional, and  
voice format.  
– WMA files which are not based upon Windows  
Media® Audio.  
– WMA files copy-protected with DRM.  
– Files which have the data such as WAVE, ATRAC3,  
etc.  
iPod or D. player operations  
• When you turn on this unit, the iPod or D. player is  
charged through this unit.  
• While the iPod or D. player is connected, all  
operations from the iPod or D. player are disabled.  
Perform all operations from this unit.  
• The text information may not be displayed correctly.  
• If the text information includes more than 8  
characters, it scrolls on the display. This unit can  
display up to 40 characters.  
Notice:  
When operating an iPod or a D. player, some  
operations may not be performed correctly or as  
intended. In this case, visit the following JVC web  
site:  
car/support/ks-pd100/index.html>  
For D. player users: <http://www.jvc.co.jp/  
english/car/support/ks-pd500/index.html>  
• The search function works but search speed is not  
constant.  
Changing the source  
• If you change the source, playback also stops  
(without ejecting the disc).  
Next time you select “DISC” for the playback source,  
disc play starts from where it has been stopped  
previously.  
• For MP3/WMA discs, playback will start from the  
beginning of the last playing track.  
• Microsoft and Windows Media are either registered  
trademarks or trademarks of Microsoft Corporation in  
the United States and/or other countries.  
• iPod is a trademark of Apple Inc., registered in the  
U.S. and other countries.  
Ejecting a disc  
• If the ejected disc is not removed within 15 seconds,  
the disc is automatically inserted again into the  
loading slot to protect it from dust. (Disc will not play  
this time.)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
What appears to be trouble is not always serious. Check the following points before calling a service center.  
Symptoms  
Remedies/Causes  
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.  
• Check the cords and connections.  
• The unit does not work at all.  
Reset the unit (see page 2).  
• SSM automatic presetting does not work. Store stations manually.  
• Static noise while listening to the radio.  
• Disc automatically ejects.  
Connect the antenna firmly.  
Insert the disc correctly.  
• CD-R/CD-RW cannot be played back.  
• Tracks on the CD-R/CD-RW cannot be  
skipped.  
• Insert a finalized CD-R/CD-RW.  
• Finalize the CD-R/CD-RW with the component which you  
used for recording.  
• Disc can be neither played back nor  
ejected.  
• Unlock the disc (see page 13).  
• Eject the disc forcibly (see page 2).  
• Sound and pictures are sometimes  
interrupted or distorted.  
• Stop playback while driving on rough roads.  
• Change the disc.  
• Check the cords and connections.  
• “NO DISC” appears on the display.  
Insert a playable disc into the loading slot.  
• No playback picture appears on the  
monitor.  
Parking brake wire is not connected properly.  
(See Installation/Connection manual.)  
• No picture appears on the monitor at all. • Connect the video cord correctly.  
• Select a correct input on the monitor.  
• Disc cannot be played back.  
• Use a disc with MP3/WMA tracks recorded in the format  
compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet.  
• Add the extension code <.mp3> or <.wma> to the file  
names.  
• Noise is generated.  
Skip to another track or change the disc. (Do not add the  
extension code <.mp3> or <.wma> to non-MP3 or WMA  
tracks.)  
• A longer readout time is required (“CHECK” Do not use too many hierarchies and folders.  
keeps flashing on the display).  
Continued on the next page  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptoms  
Remedies/Causes  
• Tracks do not play back in the order you  
have intended them to play.  
Playback order is determined when the files are recorded.  
• Elapsed playing time is not correct.  
This sometimes occurs during play. This is caused by how the  
tracks are recorded on the disc.  
• “NO FILES” appears on the display.  
Insert a disc that contains MP3/WMA tracks.  
• Correct characters are not displayed (e.g. This unit can only display letters (upper case), numbers, and a  
album name).  
limited number of symbols.  
Insert a disc into the magazine.  
Insert the magazine.  
• “NO DISC” appears on the display.  
• “NO MAG” appears on the display.  
• “RESET 8” appears on the display.  
Connect this unit and the CD changer correctly and press the  
reset button of the CD changer.  
• “RESET 1” – “RESET 7” appears on the  
display.  
Press the reset button of the CD changer.  
• The CD changer does not work at all.  
Reset the unit (see page 2).  
• The iPod or D. player does not turn on or • Check the connecting cable and its connection.  
does not work.  
• Update the firmware version.  
• Charge the battery.  
• Buttons do not work as intended.  
• The sound is distorted.  
The functions of the buttons have been changed. Press MODE  
before performing the operation.  
Deactivate the equalizer either on the unit or the iPod/  
D. player.  
• “NO IPOD” or “NO DP” appears on the  
display.  
• Check the connecting cable and its connection.  
• Charge the battery.  
• Playback stops.  
The headphones are disconnected during playback. Restart  
the playback operation using the control panel (see page 17).  
• No sound can be heard when  
connecting an iPod nano.  
• Disconnect the headphones from the iPod nano.  
• Update the firmware version of the iPod nano.  
• No sound can be heard.  
• “ERROR 01” appears on the display  
when connecting a D. player.  
Disconnect the adapter from the D. player. Then, connect it  
again.  
• “NO FILES” or “NO TRACK” appears on  
the display.  
No tracks are stored. Import tracks to the iPod or D. player.  
• “RESET 1” – “RESET 7” appears on the  
display.  
Disconnect the adapter from both the unit and iPod/D. player.  
Then, connect it again.  
• “RESET 8” appears on the display.  
Check the connection between the adapter and this unit.  
• The iPod’s or D. player’s controls do not Reset the iPod or D. player.  
work after disconnecting from this unit.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AUDIO AMPLIFIER SECTION  
VCD/CD PLAYER SECTION  
Maximum Power Output:  
Type:  
Compact disc player  
Front/Rear:  
50 W per channel  
Signal Detection  
System:  
Non-contact optical pickup  
(semiconductor laser)  
Continuous Power Output (RMS):  
Number of Channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Front/Rear:  
19 W per channel into  
4 Ω, 40 Hz to 20 000 Hz at  
no more than 0.8% total  
harmonic distortion.  
Dynamic Range:  
96 dB  
Signal-to-Noise Ratio: 98 dB  
Load Impedance:  
Tone Control Range:  
Bass:  
4 Ω (4 Ω to 8 Ω allowance)  
Wow and Flutter:  
Less than measurable limit  
MP3 Decoding Format: (MPEG1/2 Audio Layer 3)  
10 dB at 100 Hz  
10 dB at 10 kHz  
40 Hz to 20 000 Hz  
70 dB  
2.5 V/20 kΩ load (full  
scale)  
Max. Bit Rate:  
320 kbps  
Treble:  
WMA (Windows Media® Audio) Decoding Format:  
Frequency Response:  
Signal-to-Noise Ratio:  
Line-Out Level/  
Impedance:  
Max. Bit Rate:  
192 kbps  
GENERAL  
Power Requirement:  
Output Impedance:  
Other Terminal:  
1 kΩ  
LINE IN, CD changer  
Operating Voltage: DC 14.4 V  
(11 V to 16 V allowance)  
Negative ground  
VIDEO SECTION  
Grounding System:  
Color System:  
PAL/NTSC  
Allowable Operating 0°C to +40°C  
Temperature:  
Video Output (Composite): 1 Vp-p/75 Ω  
Dimensions (W × H × D): (approx.)  
TUNER SECTION  
Frequency Range:  
Installation Size:  
Panel Size:  
182 mm × 52 mm × 150 mm  
188 mm × 58 mm × 11 mm  
FM:  
87.5 MHz to 108.0 MHz  
Mass:  
1.4 kg  
(excluding accessories)  
AM:  
531 kHz to 1 602 kHz  
FM Tuner  
Usable Sensitivity:  
Design and specifications are subject to change without  
notice.  
11.3 dBf (1.0 μV/75 Ω)  
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)  
Alternate Channel  
65 dB  
Selectivity (400 kHz):  
Frequency Response:  
Stereo Separation:  
AM Tuner  
40 Hz to 15 000 Hz  
30 dB  
Sensitivity/Selectivity:  
20 μV/35 dB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
Ada MASALAH dengan cara  
pengoperasian?  
Setel kembali unit Anda  
Lihat halaman mengenai Bagaimana mereset unit anda  
EN, IN  
© 2007 Victor Company of Japan, Limited  
0207DTSMDTJEIN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KD-SV3305  
Installation/Connection Manual  
Manual Pemasangan/Penyambungan  
0207DTSMDTJEIN  
EN, IN  
GET0471-008A  
[UN]  
© 2007 Victor Company of Japan, Limited  
ENGLISH  
INDONESIA  
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does Alat penerima ini didisain untuk beroperasi hanya pada 12 V DC, sistem listrik tanah NEGATIVE. Jika  
not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.  
kendaraan anda tidak memiliki sistem ini, sebuah pembalik tegangan diperlukan, yang mana dapat dibeli  
di penyalur-penyalur audio mobil JVC.  
WARNINGS  
• DO NOT install any unit in locations where;  
PERINGATAN  
• JANGAN memasang unit pada tempat-tempat dimana;  
– it may obstruct the steering wheel and gearshift lever operations.  
– it may obstruct the operation of safety devices such as air bags.  
– it may obstruct visibility.  
– ini dapat menghalangi pengoperasian roda kemudi dan tuas gigi persneling  
– ini dapat menghalangi pengoperasian alat pengaman seperti kantung udara.  
– ini dapat menghalangi pandangan.  
• DO NOT operate the unit while driving.  
• JANGAN mengoperasikan unit sewaktu mengemudi.  
• If you need to operate the unit while driving, be sure to look ahead carefully.  
• The driver must not watch the monitor while driving.  
If the parking brake is not engaged, “PARKING” flashes on the display, and no playback  
picture will be shown on the monitor.  
– This warning appears only when the parking brake wire is connected to the parking brake  
system built in the car.  
• Jika Anda harus mengoperasikan unit sewaktu mengemudi, pastikan Anda melihat ke depan  
dengan hati-hati.  
• Pengemudi tidak boleh menonton monitor selagi mengemudi.  
Jika rem parkir tidak sedang dipakai, “PARKING” berkedip pada display, dan tidak ada  
gambar permainan-ulang yang akan dipertunjukkan pada monitor.  
– Peringatan ini muncul hanya jika kabel rem parkir telah tersambung ke sistem rem parkir  
yang terpasang tetap di dalam mobil.  
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all Untuk mencegah hubungan pendek, kami menyarankan anda memutuskan sambungan terminal negatif  
electrical connections before installing the unit.  
• Be sure to ground this unit to the car’s chassis again after installation.  
baterai dan membuat semua sambungan-sambungan listrik sebelum memasang alat penerima.  
• Pastikan untuk mentanahkan alat penerima ini ke casis mobil kembali setelah pemasangan.  
Notes:  
Catatan:  
• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio  
dealer.  
• Ganti sekring dengan voltase yang sudah ditetapkan. Jika sekring sering meledak, konsultasikan pada  
penyalur audio mobil JVC anda.  
• It is recommended to connect to the speakers with maximum power of more than 50 W (both at  
the rear and at the front, with an impedance of 4 to 8 ). If the maximum power is less than  
50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see page 16 of the  
INSTRUCTIONS).  
• Disarankan untuk menghubungkan speaker-speaker dengan maksimum power lebih dari 50 W (keduanya  
di belakang dan di depan, dengan sebuah impedansi 4 sampai 8 ). Jika maksimum power kurang  
dari 50 W, ganti pengaturan “AMP GAIN” (“PENAMBAH PENGUAT”) untuk mencegah speaker-speaker  
dari kerusakan (lihat halaman 16 dari BUKU PETUNJUK).  
• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.  
• The heat sink becomes very hot after use. Be careful not to touch it when  
removing this unit.  
• Untuk mencegah hubungan pendek, tutup ujung-ujung terminal-terminal yang TIDAK DIGUNAKAN  
dengan pita isolasi.  
• Pendingin menjadi sangat panas setelah digunakan. Hati-hati untuk tidak menyentuhnya ketika  
memindahkan alat penerima ini.  
Heat sink  
Pendingin  
PRECAUTIONS on power supply and speaker connections:  
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit  
will be seriously damaged.  
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in  
your car.  
TINDAKAN-TINDAKAN PENCEGAHAN pada suplai power dan  
sambungan-sambungan speaker:  
• JANGAN sambungkan ujung-ujung speaker dari kabel power ke baterai mobil; sebaliknya,  
alat penerima tersebut akan secara serius rusak.  
• SEBELUM menyambung ujung-ujung speaker dari kabel power ke speaker-speaker, cek perkabelan  
speaker dalam mobil anda.  
Parts list for installation and connection  
Daftar bagian-bagian untuk pemasangan dan penyambungan  
If any item is missing, consult your JVC car audio dealer immediately.  
Jika ada item yang hilang, segera hubungi dealer audio mobil JVC anda.  
A / B  
Hard case/Control panel  
Kotak keras/Panel kontrol  
C
D
E
Sleeve  
Selongsong  
Trim plate  
Plat rapi  
Power cord  
Kabel power  
F
G
H
I
Crimp connector  
Konektor kerut  
Washer (ø5)  
Perapat sambungan (ø5)  
Lock nut (M5)  
Mur kunci (M5)  
Mounting bolt (M5 × 20 mm)  
Baut bingkai (M5 × 20 mm)  
J
K
L
M
Rubber cushion  
Bantalan karet  
Handles  
Pegangan-pegangan  
Remote controller  
Remote kontrol  
Battery  
Baterai  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (IN-DASH MOUNTING)  
The following illustration shows a typical installation. If you have any questions or require information  
regarding installation kits, consult your JVC car audio dealer or a company supplying kits.  
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.  
PEMASANGAN (BINGKAI-DALAM DASH)  
Ilustrasi berikut menunjukkan sebuah tipe pemasangan. Jika anda mempunyai suatu pertanyaan atau  
informasi yang diperlukan mengenai alat-alat pemasangan, konsultasikan pada penyalur audio mobil JVC  
atau sebuah perusahaan yang mensuplai alat-alat.  
• Jika anda tidak yakin bagaimana memasang alat penerima ini dengan benar, biarkan dipasang dengan  
teknisi yang berkualitas.  
Do the required electrical connections.  
Lakukan penyambungan-penyambungan  
listrik yang diperlukan.  
Bend the appropriate tabs to hold the  
sleeve firmly in place.  
Bengkokkan pengait-pengait yang  
tepat untuk menahan selongsong  
secara kuat pada tempatnya.  
When using the optional stay  
penguat tambahan  
/
Ketika menggunakan  
When installing the unit without using the sleeve / Ketika memasang alat penerima  
tanpa menggunakan selongsong  
Stay (option)  
Penguat (tambahan)  
In a Toyota car for example, first remove the car radio and install the unit in its place.  
Dalam sebuah kereta Toyota misalnya, pertama pindahkan radio mobil dan pasang alat penerima tersebut ke dalam tempatnya.  
Fire wall  
Dinding tahan api  
Flat type screws (M5 × 8 mm)*2  
Sekrup-sekrup tipe rata (M5 × 8 mm)*2  
Dashboard  
Tempat alat pada bagian  
depan  
Bracket*2  
Breket*2  
Screw (option)  
Sekrup (tambahan)  
Flat type screws (M5 × 8 mm)*2  
Sekrup-sekrup tipe rata (M5 × 8 mm)*2  
Pocket  
Kantong  
Bracket*2  
Breket*2  
Note  
: When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws  
are used, they could damage the unit.  
: Ketika memasang alat penerima pada breket bingkai, pastikan untuk menggunakan sekrup-sekrup panjang–  
8 mm. Jika sekrup yang lebih panjang digunakan, maka dapat merusak alat penerima.  
Install the unit at an angle of less than 30˚.  
Pasang penerima pada suatu sudut kurang  
dari 30˚.  
Catatan  
Removing the unit  
Memindahkan alat penerima  
Before removing the unit, release the rear section.  
Sebelum memindahkan alat penerima, lepaskan seksi belakang.  
Insert the two handles, then pull them as  
illustrated so that the unit can be removed.  
Sisipkan kedua pemegang dan tarik alat penerima  
seperti yang diilustrasikan hingga alat penerima  
dapat dipindahkan.  
1
1
*
*
When you stand the unit, be careful not to damage the fuse on the rear.  
Not supplied for this unit.  
*
*
Ketika anda memberdirikan alat penerima, hati-hati untuk tidak merusak sekring di belakang.  
Tidak disediakan untuk alat penerima ini.  
2
2
PEMECAHAN MASALAH  
TROUBLESHOOTING  
Sekring meledak.  
The fuse blows.  
* Apakah ujung-ujung merah dan hitam tersambung dengan benar?  
* Are the red and black leads connected correctly?  
Power tidak dapat dihidupkan.  
* Apakah ujung kuning sudah tersambung?  
Power cannot be turned on.  
* Is the yellow lead connected?  
Tidak ada suara dari speaker.  
No sound from the speakers.  
* Apakah ujung keluaran speaker terhubung pendek?  
* Is the speaker output lead short-circuited?  
Suara terdistorsi.  
Sound is distorted.  
* Apakah ujung keluaran speaker sudah ditanahkan?  
* Apakah terminal-terminal “–” dari speaker-speaker L dan R sudah ditanahkan secara umum?  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
Berisik yang mengganggu suara-suara.  
Noise interfere with sounds.  
* Apakah terminal tanahan belakang tersambung ke casis mobil menggunakan kabel-kabel terpendek dan  
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?  
tertebal?  
This unit becomes hot.  
Alat penerima menjadi panas.  
* Is the speaker output lead grounded?  
* Apakah ujung keluaran speaker sudah ditanahkan?  
* Are the “–” terminals of L and R speakers grounded in common?  
* Apakah terminal-terminal “–” dari speaker-speaker L dan R sudah ditanahkan secara umum?  
This unit does not work at all.  
* Have you reset your unit?  
Alat penerima ini tidak bekerja secara keseluruhan.  
* Apakah anda sudah reset (memasang kembali) alat penerima anda?  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
ENGLISH  
INDONESIA  
ELECTRICAL CONNECTIONS  
SAMBUNGAN-SAMBUNGAN LISTRIK  
A
Typical connections / Ciri khas sambungan-sambungan  
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious  
damage to this unit.  
The leads of the power cord and those of the connector from the car body may be different in color.  
Sebelum penyambungan: Cek perkabelan dalam mobil dengan hati-hati. Penyambungan yang  
tidak benar mungkin menyebabkan kerusakan serius pada alat penerima.  
Ujung dari kabel power dan beberapa konektor dari bodi mobil mungkin berbeda dalam warna.  
1 Connect the colored leads of the power cord in the order specified in the illustration below.  
2 Connect the antenna cord.  
1 Sambungkan ujung berwarna dari kabel power dalam urutan spesifikasi pada ilustrasi di bawah.  
2 Sambungkan kabel antena.  
3 Finally connect the wiring harness to the unit.  
3 Akhirnya sambungkan dudukan kabel ke alat penerima.  
LINE IN  
(see diagram / lihat diagram  
)
Line out (see diagram  
Keluaran (lihat diagram  
)
VIDEO OUT  
(see diagram / lihat diagram  
)
)
Rear ground terminal  
Terminal tanah belakang  
15 A fuse  
Sekring 15 A  
Antenna terminal  
Terminal antena  
To external components  
(see diagram  
)
Ke komponen eksternal  
(lihat diagram  
)
Ignition switch  
Saklar kontak  
Black  
Hitam  
To metallic body or chassis of the car  
Ke besi bodi atau casis dari mobil tersebut  
Yellow*2  
Kuning*2  
To a live terminal in the fuse block connecting to the car battery  
(bypassing the ignition switch) (constant 12 V)  
Ke sebuah tempat terminal dalam blok sekring disambungkan ke  
baterai mobil (abaikan saklar kontak) (konstant 12 V)  
Red  
Merah  
To an accessory terminal in the fuse block  
Ke sebuah terminal aksesoris dalam blok sekring  
Fuse block  
Blue  
Biru  
Blok sekring  
To the automatic antenna if any (250 mA max.)  
Ke antena otomatis jika ada (maksimum 250 mA)  
Blue with white stripe  
Biru dengan strip putih  
To the remote lead of other equipment (200 mA max.)  
Ke ujung jauh dari peralatan lain (maksimum 200 mA)  
Brown  
Coklat  
To cellular phone system  
Untuk sistem telepon selular  
Light green  
Hijau muda  
To parking brake, metallic body or chassis of the car  
Ke rem parkir, logam body atau casis mobil.  
White with black stripe  
Putih dengan strip hitam  
White  
Putih  
Gray with black stripe  
Abu-abu dengan strip hitam  
Gray  
Abu-abu  
Green with black stripe  
Hijau dengan strip hitam  
Green  
Hijau  
Purple with black stripe  
Ungu dengan strip hitam  
Purple  
Ungu  
Left speaker (front)  
Speaker kiri (depan)  
Right speaker (front)  
Speaker kanan (depan)  
Left speaker (rear)  
Speaker kiri (belakang)  
Right speaker (rear)  
Speaker kanan (belakang)  
Connecting the parking brake wire / Menyambung kabel rem parkir  
B
When installing the monitor in a location where it can be seen by the driver  
Connect the parking brake wire to the parking brake system built in the car.  
Ketika memasang monitor pada tempat yang dapat dilihat oleh pengemudi  
Sambungkan kabel rem parkir ke sistem rem parkir yang terpasang tetap dalam mobil.  
When installing the monitor in a location where it cannot be  
seen by the driver  
Connect the parking brake wire to metallic body or chassis of the  
car.  
Ketika memasang monitor pada tempat yang tidak dapat  
dilihat oleh pengemudi  
Sambungkan kabel rem parkir ke logam body atau casis mobil.  
Parking brake wire (light green)  
Kabel rem parkir (hijau muda)  
Parking brake  
Rem parkir  
Parking brake wire (light green)  
Kabel rem parkir (hijau muda)  
To metallic body or chassis of the car  
Ke logam body atau casis mobil  
Parking brake switch (inside the car)  
Saklar rem parkir (di dalam mobil)  
C
Connecting the crimp connector / Menyambung konektor kerut  
Wire connecting the battery and the parking brake switch.  
Contact the metallic part of the crimp to the wires inside.  
Hubungkan bagian logam dari konektor kerut ke kabel-  
kabel di dalam.  
Kabel yang menyambungkan baterai dan saklar rem parkir.  
Pinch the crimp firmly.  
Jepit konektor dengan kuat.  
Attach the parking brake wire to this point.  
Pasal kabel rem parkir ke poin ini.  
1
1
2
*
*
Not supplied for this unit.  
*
*
Tidak disediakan untuk alat penerima ini.  
Sebelum pengecekan pengoperasian dari alat penerima ini sebelum pemasangan, ujung ini harus sudah  
dihubungkan, selain itu power tidak dapat dihidupkan.  
2
Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power  
cannot be turned on.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the monitor / Menyambung monitor  
D
Video cord*3  
Kabel video*3  
or / atau  
Rear side  
Sisi belakang  
KV-MR9010  
9-INCH WIDESCREEN MONITOR*3  
MONITOR LAYAR LEBAR 9 INCI*3  
Connecting the external amplifier / Penyambungan penguat eksternal  
E
You can connect an amplifier to upgrade your car stereo system.  
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it  
can be controlled through this unit.  
• Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker  
leads of this unit unused.  
Anda dapat menyambungkan penguat untuk meningkatkan sistem stereo mobil anda.  
• Sambungkan ujung jauh (biru dengan strip putih) ke ujung jauh dari peralatan lain sehingga dapat  
dikontrol melalui alat penerima ini.  
• Putuskan sambungan speaker-speaker dari alat penerima ini, sambungkan ini ke penguat.  
Biarkan ujung speaker dari alat penerima ini tidak digunakan.  
Y-connector*3  
Konektor Y*3  
Remote lead  
Ujung jauh  
Remote lead (blue with white stripe)  
Ujung jauh (biru dengan strip putih)  
Rear speakers  
Speaker-speaker belakang  
To the remote lead of other equipment or  
automatic antenna if any  
Ke ujung jauh dari peralatan lain atau antena  
otomatis jika ada  
JVC Amplifier  
Penguat JVC  
Front speakers  
Speaker-speaker depan  
F
Connecting the external components / Menyambung komponen eksternal  
JVC CD changer, Apple iPod, or JVC D. player / JVC CD changer, Apple iPod atau JVC D. player  
Set “CHANGER” for the external input setting (See page 16 of the INSTRUCTIONS.) / Aturlah “CHANGER” untuk pengaturan input eksternal (Lihat halaman 16 dari BUKU PETUNJUK.  
)
You can connect these components as illustrated below. The iPod or D. player can be connected using  
an interface adapter (not supplied)—KS-PD100 (for iPod) or KS-PD500 (for D. player).  
Anda bisa menyambungkan komponen-komponen ini seperti yang diilustrasikan di bawah. iPod atau  
D. player bisa disambungkan dengan mengunakan adaptor antarmuka (tidak disediakan)—KS-PD100  
(untuk iPod) atau KS-PD500 (untuk D. player).  
CAUTION  
:
PERINGATAN:  
Before connecting the external components, make sure that the unit is turned off.  
Sebelum menyambungkan komponen eksternal, pastikan bahwa alat penerima sudah dimatikan.  
JVC CD changer  
CD changer JVC  
CD changer jack  
Konektor CD changer  
or / atau  
Apple iPod  
Apple iPod  
or / atau  
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.  
iPod adalah merek dagang dari Apple Computer, Inc., terdaftar di Amerika Serikat dan di  
negara-negara lain.  
JVC D. player  
JVC D. player  
Other external component / Komponen eksternal lainnya  
Set “EXT IN” for the external input setting (See page 16 of the INSTRUCTIONS.) / Aturlah “EXT IN” untuk pengaturan  
input eksternal (Lihat halaman 16 dari BUKU PETUNJUK.)  
External component  
Komponen eksternal  
External component  
Komponen eksternal  
CD changer jack  
Konektor CD changer  
3.5 mm stereo mini plug  
Steker mini stereo 3.5 mm  
or  
atau  
External component  
Komponen eksternal  
3
4
5
3
4
5
*
*
*
Not supplied for this unit.  
Signal cord (not supplied for this unit).  
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint  
(if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the  
unit.  
Connecting cord supplied for your CD changer.  
Line Input Adapter KS-U57 (not supplied for this unit).  
AUX Input Adapter KS-U58 (not supplied for this unit).  
*
*
*
Tidak disediakan untuk alat penerima ini.  
Kabel sinyal (tidak disediakan untuk alat penerima ini).  
Pasangkan dengan kuat kabel tanah ke bodi besi atau ke casis dari mobil—pada tempat yang tidak dilapisi cat  
(jika dilapisi cat, hilangkan cat sebelum memasang kabel). Kegagalan melakukan ini mungkin menyebabkan  
kerusakan pada alat penerima tersebut.  
Penyambung sinyal disediakan untuk CD changer anda.  
Adapter Jalur Masukan KS-U57 (tidak disediakan untuk alat penerima ini).  
Adapter Masukan AUX KS-U58 (tidak disediakan untuk alat penerima ini).  
6
7
8
6
7
8
*
*
*
*
*
*
4
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Air Compressor 2340S9GH AS User Manual
Jasco Digital Camera HO98066 User Manual
JBL Portable Speaker EON10 User Manual
John Deere Snow Blower MTF051056L User Manual
JVC DVD Player LVT2008 003A User Manual
JVC Projector DLA RS1X User Manual
JVC VCR HM DH5U User Manual
Kenwood Car Stereo System KDC 215S User Manual
Keurig Coffeemaker 60 200258 037 User Manual
KitchenAid Ventilation Hood W10029780 User Manual