JVC Car Stereo System GET0305 001A User Manual

CD RECEIVER  
KD-G614/KD-G514  
For canceling the display demonstration, see page 8.  
For installation and connections, refer to the separate manual.  
INSTRUCTIONS  
GET0305-001A  
[UI]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
How to reset your unit ...........................  
How to forcibly eject a disc...................  
How to read this manual........................  
How to use the M MODE button...........  
2
2
4
4
Sound adjustments ................18  
Selecting preset sound modes  
(C-EQ: custom equalizer) .................. 18  
Adjusting the sound............................... 19  
Control panel  
General settings — PSM .........20  
KD-G614/KD-G514 ................... 5  
Basic procedure ..................................... 20  
Parts identification.................................  
Remote controller — RM-RK50 ... 6  
Main elements and features ...................  
5
Other main functions .............22  
Assigning titles to the sources ............... 22  
Detaching the control panel................... 23  
6
Getting started....................... 7  
External component operations...24  
Basic operations..................................  
Canceling the display demonstrations...  
Setting the clock ....................................  
7
8
8
Playing an external component ............ 24  
Maintenance..........................25  
More about this receiver ........26  
Troubleshooting.....................28  
Specifications.........................31  
Radio operations ................... 9  
Listening to the radio...........................  
9
Storing stations in memory.................... 10  
Listening to a preset station................... 11  
Disc operations ......................12  
Playing a disc in the receiver ............... 12  
Playing discs in the CD changer ........... 13  
Other main functions ............................. 15  
Changing the display information ......... 16  
Selecting the playback modes................ 17  
*For safety....  
• Do not raise the volume level too much, as  
this will block outside sounds, making driving  
dangerous.  
• Stop the car before performing any  
complicated operations.  
*Temperature inside the car....  
If you have parked the car for a long time in  
hot or cold weather, wait until the temperature  
in the car becomes normal before operating the  
unit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to read this manual  
How to use the M MODE button  
If you press M MODE, the receiver goes into  
functions mode, then the number buttons and  
5/buttons work as different function buttons.  
The following methods are used to made the  
explanations simple and easy-to-understand:  
• Some related tips and notes are explained in  
“More about this receiver” (see pages 26 and  
27).  
Ex.: When number button 2 works as  
MO (monaural) button.  
• Button operations are mainly explained with  
the illustrations as follows:  
Press briefly.  
Press repeatedly.  
Time countdown indicator  
Press either one.  
To use these buttons for original functions  
again after pressing M MODE, wait for  
5 seconds without pressing any of these buttons  
until the functions mode is cleared.  
• Pressing M MODE again also clears the  
functions mode.  
Press and hold until  
your desired response  
begins.  
Press and hold both  
buttons at the same  
time.  
Caution on volume setting:  
Discs produce very little noise compared  
with other sources. Lower the volume  
before playing a disc to avoid damaging  
the speakers by the sudden increase of the  
output level.  
The following marks are used to indicate...  
: Built-in CD player operations.  
: External CD changer operations.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control panel — KD-G614/KD-G514  
Parts identification  
Display window  
6
7 8  
9
p
q
w e  
r
t
y
u i  
o
1 5 (up) / (down) buttons  
2 E EQ (equalizer) button  
3 D DISP (display) button  
4 S SEL (select) button  
5 • Control dial  
Display window  
; Disc information indicators—TAG (ID3  
Tag), (folder), (track/file)  
a Main display  
s Source display  
Volume level indicator  
d EQ (equalizer) indicator  
f Sound mode (C-EQ: custom equalizer)  
indicators—ROCK, CLASSIC, POPS,  
HIP HOP, JAZZ, USER  
(standby/on attenuator) button  
6 Display window  
7 Remote sensor  
• DO NOT expose the remote sensor to  
strong light (direct sunlight or artificial  
lighting).  
also works as the time countdown  
indicator and level meter during play (see  
page 20).  
8 0 (eject) button  
9
p
4/¢  
buttons  
(control panel release) button  
g Disc type indicators—WMA, MP3  
h Tuner reception indicators—ST (stereo),  
MO (monaural)  
j Playback source indicators—  
CH: Lights up only when CD-CH is selected  
as the playback source.  
DISC: Lights up for the built-in CD player.  
k Playback mode / item indicators—  
RND (random),  
RPT (repeat)  
l LOUD (loudness) indicator  
/ Tr (track) indicator  
q SOURCE button  
w BAND button  
e Number buttons  
r MO (monaural) button  
t SSM (Strong-station Sequential Memory)  
button  
y RPT (repeat) button  
u RND (random) button  
i M MODE button  
(disc),  
(folder),  
o
AUX (auxiliary) input jack  
• Only for KD-G614.  
• NOT compatible with digital signals.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote controller — RM-RK50  
Installing the lithium coin battery  
(CR2025)  
Main elements and features  
• When operating, aim the remote controller  
directly at the remote sensor on the  
receiver. Make sure there is no obstacle in  
between.  
1
(standby/on/attenuator) button  
• Turns on and off the power and also  
attenuates the sound.  
Warning:  
2 5 U (up) / D (down) buttons  
5 U: Changes the FM/AM bands.  
• D : Changes the preset stations.  
• Changes the folder of the MP3/WMA  
discs.  
• Store the battery in a place where children  
cannot reach to avoid risk of accident.  
• To prevent the battery from over-heating,  
cracking, or starting a fire:  
• While playing an MP3 disc on an  
MP3-compatible CD changer:  
– Changes the disc if pressed briefly.  
– Changes the folder if pressed and held.  
3 VOL – / VOL + buttons  
• Adjusts the volume level.  
– Do not recharge, short, disassemble, or  
heat the battery or dispose of it in a fire.  
– Do not leave the battery with other  
metallic materials.  
– Do not poke the battery with tweezers or  
similar tools.  
4 SOUND button  
– Wrap the battery with tape and insulate  
when throwing away or saving it.  
• Selects the sound mode (C-EQ: custom  
equalizer).  
5 SOURCE button  
• Selects the source.  
Caution:  
6 2 R (reverse) / F (forward) 3 buttons  
• Searches for stations if pressed briefly.  
• Fast-forwards or reverses the track if  
pressed and held.  
• Changes the tracks of the disc.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Basic operations  
* The control panel  
illustrations used for  
explanation in this  
manual is KD-G614.  
~
Ÿ
@
Adjust the sound as you want.  
(See pages 18 and 19.)  
To drop the volume in a moment (ATT)  
To restore the sound,  
press it again.  
You cannot select some sources if they  
are not ready.  
To turn off the power  
* Only for KD-G614.  
!
For FM/AM tuner only  
Volume level appears.  
Volume level indicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Canceling the display  
demonstrations  
If no operations are done for about 20 seconds,  
display demonstration starts.  
Setting the clock  
1
[Initial: DEMO ON]—see page 20.  
2 Set the hour and minute.  
1 Select “CLOCK H” (hour), then  
adjust the hour.  
1
2
2 Select “CLOCK M” (minute),  
then adjust the minute.  
3
3 Finish the procedure.  
To check the current clock time when the  
power is turned off  
4 Finish the procedure.  
To activate the display demonstration  
In step 3 above...  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio operations  
Listening to the radio  
To tune in to a station manually  
In step ! on the left...  
1
~
Ÿ
Selected band appears.  
2 Select the desired station frequencies.  
Lights up when receiving an FM stereo  
broadcast with sufficient signal strength.  
!
Start searching for a station.  
When a station is received, searching  
stops.  
To stop searching, press the same  
button again.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
When an FM stereo broadcast is hard to  
receive  
1
Storing stations in memory  
You can preset six stations for each band.  
FM station automatic presetting—  
SSM (Strong-station Sequential  
Memory)  
2
1
2 Select the FM band (FM1 – FM3)  
Lights up when monaural mode is activated.  
you want to store into.  
Reception improves, but stereo effect will  
be lost.  
To restore the stereo effect, repeat the same  
procedure. “MONO OFF” appears and the MO  
indicator goes off.  
3
4
“SSM” flashes, then disappears when  
automatic presetting is over.  
Local FM stations with the strongest signals are  
searched and stored automatically in the FM  
band.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual presetting  
Ex.:Storing FM station of 92.5 MHz into the  
preset number 4 of the FM1 band.  
Listening to a preset station  
1
2
1
2
3
3 Select the preset station (1 – 6) you  
want.  
or  
4
To check the current clock time while  
listening to an FM or AM station  
Preset number flashes for a while.  
* Only for KD-G614: If no title is assigned to  
a station, “NO NAME” appears. To assign  
a title to a station, see page 22.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc operations  
Playing a disc in the receiver  
All tracks will be played  
repeatedly until you  
change the source or eject  
the disc.  
When inserting an audio CD or a CD Text  
disc:  
About MP3 and WMA discs  
MP3 and WMA (Windows Media® Audio)  
“tracks” (words “file” and “track” are used  
interchangeably) are recorded in “folders.”  
Total playing time  
Total track number  
of the inserted disc of the inserted disc  
When inserting an MP3 or a WMA disc:  
CD Text: Disc title/performer =  
Track title appears automatically  
(see page 16).  
Total folder  
number  
Total track  
number  
Current track  
number  
Clock*2  
*2 Elapsed playing time appears for a while if  
the current disc is an audio CD.  
Disc information appears  
automatically (see page 16).  
Current track  
number  
To stop play and eject the disc  
Clock  
Selected folder number  
*1 Either the MP3 or WMA indicator lights up  
depending on the detected file.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing discs in the CD changer  
About the CD changer  
~
It is recommended to use the JVC MP3-  
compatible CD changer with your receiver.  
• You can also connect other CH-X series  
CD changers (except CH-X99 and  
CH-X100). However, they are not  
* If you have changed “EXT IN” setting  
to “EXT IN” (see page 21), you  
cannot select the CD changer.  
compatible with MP3 discs, so you cannot  
play back MP3 discs.  
• You cannot use the KD-MK series CD  
changers with this receiver.  
• Disc text information recorded in the CD  
Text can be displayed when a JVC CD  
Text compatible CD changer is connected.  
Before operating your CD changer:  
• Refer also to the Instructions supplied  
with your CD changer.  
• You cannot control and play any WMA  
disc in the CD changer.  
Selected disc number  
Ÿ
Select a disc.  
All tracks of the inserted discs in the magazine  
will be played repeatedly until you change  
the source or eject the magazine from the CD  
changer.  
For disc number from 01 – 06:  
For disc number from 07 – 12:  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the current disc is an MP3 disc:  
To fast-forward or reverse the track  
Fast-forwards.  
Reverses.  
Folder name*1  
To go to the next or previous tracks  
Selected folder number  
Disc information appears  
automatically (see page 16).  
Current track  
To the following tracks.  
number  
Clock  
To the beginning of the current track, then the  
previous tracks.  
To go to the next or previous folders (only  
for MP3 or WMA discs)  
*1 “ROOT” appears if no folder is included in  
the disc.  
For MP3 discs:  
For WMA discs:  
When the current disc is an audio CD or a  
CD Text disc:  
CD Text: Disc title/performer =  
Track title appears automatically  
(see page 16).  
To next folders.  
To previous folders.  
Current track  
number  
Clock*2  
*2 Elapsed playing time appears for a while if  
the current disc is an audio CD.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To locate a particular track (for CD) or  
folder (for MP3 or WMA discs) directly  
2
To select a number from 01 – 06:  
First time you press +10 or –10 button, the  
track skips to the nearest higher or lower  
track with a track number of multiple ten  
(ex. 10th, 20th, 30th).  
Then each time you press the button, you  
can skip 10 tracks.  
• After the last track, the first track will be  
selected and vice versa.  
To select a number from 07 – 12:  
3
• To use folder search on MP3/WMA discs, it  
is required that folders are assigned with  
2-digit numbers at the beginning of their  
folder names—01, 02, 03, and so on.  
• To select a particular track in a folder  
(for MP3 or WMA disc) after selecting a  
folder:  
Prohibiting disc ejection  
You can lock a disc in the loading slot.  
Other main functions  
Skipping a track quickly during play  
To cancel the prohibition, repeat the same  
procedure.  
• For MP3 or WMA disc, you can skip a track  
within the same folder.  
Ex.: To select track 32 while playing track 6  
1
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the display information  
While playing an audio CD or a CD Text (  
/
)
*1 For KD-G614: If no title is assigned to an audio CD, “NO NAME” appears. To assign a  
title to an audio CD, see page 22.  
For KD-G514: “NO NAME” appears.  
While playing an MP3 (  
/
) or WMA (  
) disc  
• When “TAG DISP” is set to “TAG ON” (see page 21)  
*2 If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this  
case, the TAG indicator will not light up.  
• When “TAG DISP” is set to “TAG OFF”  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the playback modes  
You can use only one of the following playback modes at a time.  
1
2 Select your desired playback mode.  
Repeat play  
Mode  
Plays repeatedly  
TRK RPT  
: The current track.  
• RPT lights up.  
FLDR RPT*1 : All tracks of the current folder.  
and RPT light up.  
DISC RPT*2 : All tracks of the current disc.  
and RPT light up.  
RPT OFF  
: Cancels.  
Ex.: When “TRK RPT” is selected while  
playing an MP3 disc in the receiver  
Random play  
Mode  
Plays at random  
FLDR RND*1 : All tracks of the current folder,  
then tracks of the next folder  
and so on.  
• RND and  
light up.  
DISC RND : All tracks of the current disc.  
• RND and  
light up.  
MAG RND*2 : All tracks of the inserted discs.  
• RND lights up.  
: Cancels.  
Ex.: When “DISC RND” is selected while  
playing an MP3 disc in the receiver  
RND OFF  
*1 Only while playing an MP3 (  
*2 Only while playing discs in the CD changer (  
/
) or WMA (  
).  
) disc.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound adjustments  
Selecting preset sound modes (C-EQ: custom equalizer)  
You can select a preset sound mode suitable to  
the music genre.  
Preset values  
Indication  
For:  
1
2
3
*
*
*
BAS TRE LOUD  
USER  
ROCK  
(Flat sound) 00  
00  
OFF  
~
Rock or  
+03 +01 ON  
disco music  
CLASSIC Classical  
music  
+01 –02 OFF  
POPS  
Light music +04 +01 OFF  
HIP HOP Funk or rap +02  
music  
00  
ON  
Ex.: When “ROCK” is selected  
JAZZ  
Jazz music  
+02 +03 OFF  
Indication pattern for each sound mode:  
*1 BAS: Bass  
*2 TRE: Treble  
*3 LOUD: Loudness  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indication  
BAS*1  
To do:  
Range  
Adjusting the sound  
You can adjust the sound characteristics to your  
preference.  
Adjust the bass.  
–06 (min.)  
to  
+06 (max.)  
(bass)  
TRE*1  
(treble)  
Adjust the treble. –06 (min.)  
1
to  
+06 (max.)  
FAD*2  
(fader)  
Adjust the front  
and rear speaker  
balance.  
R06  
(Rear only)  
to  
* Only for KD-G614.  
F06  
(Front only)  
BAL  
Adjust the left  
L06  
(balance)  
and right speaker (Left only)  
Ex.: When “TRE” is selected  
balance.  
to  
R06  
(Right only)  
2
LOUD*1  
Boost low and  
LOUD ON  
(loudness)  
high frequencies  
to produce a well- LOUD OFF  
balanced sound at  
J
low volume level.  
Indication pattern changes as  
you adjust the level.  
SUB. W*3  
Adjust the  
00 (min.) to  
(subwoofer) subwoofer output 08 (max.)  
level.  
VOL*4  
(volume)  
Adjust the  
volume.  
00 (min.) to  
30 or 50  
(max.)*5  
*1 When you adjust the bass, treble, or  
loudness, the adjustment you have made is  
stored for the currently selected sound mode  
(C-EQ) including “USER.”  
*2 If you are using a two-speaker system, set  
the fader level to “00.”  
*3 Only for KD-G614: This takes effect only  
when a subwoofer is connected.  
*4 Normally the control dial works as the  
volume control. So you do not have to select  
“VOL” to adjust the volume level.  
*5 Depending on the amplifier gain control  
setting. (See page 21 for details.)  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General settings — PSM  
3 Adjust the PSM item selected.  
Basic procedure  
You can change PSM (Preferred Setting Mode)  
items listed in the table that follows.  
1
4 Repeat steps 2 and 3 to adjust the  
other PSM items if necessary.  
2 Select a PSM item.  
5 Finish the procedure.  
Ex.: When you select “DIMMER”  
Indications  
Selectable settings, [reference page]  
DEMO  
Display demonstration  
DEMO ON : [Initial]; Display demonstration will be activated  
automatically if no operation is done for about  
20 seconds, [8].  
DEMO OFF: Cancels.  
CLOCK H  
1 – 12, [8]  
Hour adjustment  
[Initial: 1 (1:00)]  
CLOCK M  
00 – 59, [8]  
Minute adjustment  
[Initial: 00 (1:00)]  
LEVEL  
Audio level meter  
ON  
OFF  
: [Initial]; Activates the audio level indicator.  
: Cancels; sound mode indicator is shown, [18].  
DIMMER  
AUTO  
: [Initial]; Dims the display when you turn on the  
Dimmer  
headlights.  
ON  
OFF  
: Activates dimmer.  
: Cancels.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indications  
Selectable settings, [reference page]  
TEL*1  
MUTING 1/MUTING 2: Select either one which mutes the sounds  
Telephone muting  
while using the cellular phone.  
OFF  
: [Initial]; Cancels.  
SCROLL*2  
Scroll  
ONCE  
AUTO  
OFF  
: [Initial]; Scrolls the disc information once.  
:
Repeats scrolling (5-second intervals in between).  
: Cancels.  
• Pressing D DISP for more than one second can scroll the display  
regardless of the setting.  
WOOFER*1  
Subwoofer cutoff  
frequency  
LOW  
MID  
: Frequencies lower than 55 Hz are send to the  
subwoofer.  
: [Initial]; Frequencies lower than 85 Hz are send to  
the subwoofer.  
HIGH  
: Frequencies lower than 115 Hz are send to the  
subwoofer.  
EXT IN*3  
External input  
CHANGER : [Initial]; To use a JVC CD changer, [13].  
EXT IN : To use another external component, [24].  
AUX ADJ*1  
Auxiliary input level  
adjustment  
A.ADJ 00 – A.ADJ 05: Adjust the auxiliary input level  
accordingly, to avoid the sudden increase of the  
output level when changing the source from external  
component connected to the AUX input jack on the  
control panel.  
[Initial: A.ADJ 00]  
TAG DISP  
TAG ON  
: [Initial]; Shows the ID3 tag while playing MP3/WMA  
Tag display  
tracks, [16].  
TAG OFF : Cancels.  
AMP GAIN  
Amplifier gain control  
You can change the maximum volume level of this receiver.  
LOW PWR : VOL 00 – VOL 30 (Select this if the maximum power  
of the speaker is less than 50 W to prevent them from  
damaging the speaker.)  
HIGH PWR : [Initial]; VOL 00 – VOL 50  
*1 Only for KD-G614.  
*2 Some characters or symbols will not be shown (and will be blanked) or substituted on the display  
(Ex. “ABCå!d#” ]“ABCA D ”.)  
*3 Displayed only when one of the following sources is selected —FM, AM, CD, or (AUX IN: only  
for KD-G614).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other main functions  
3 Assign a title.  
Assigning titles to the sources  
1 Select a character.  
This section is only for KD-G614.  
You can assign titles to station frequencies  
and CDs (both in this receiver and in the CD  
changer).  
Maximum number of  
Sources  
characters  
FM/AM tuner  
Up to 8 characters (up  
to 30 station frequencies  
including both FM and  
AM)  
2 Move to the next (or previous)  
character position.  
CDs/CD-CH  
Up to 32 characters (up to  
30 discs)  
* You cannot assign a title to a CD Text or an  
MP3/WMA disc.  
3 Repeat steps 1 and 2 until you  
finish entering the title.  
1 Select the sources.  
• For FM/AM tuner: Tune in to a station.  
• For a CD in this receiver: Insert a CD.  
• For CDs in the CD changer: Select  
“CD-CH,” then select a disc number.  
4 Finish the procedure.  
2 Enter the title assignment mode.  
To erase the entire title  
In step 2 on the left...  
Ex.: When you select CD as the source  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching the control panel  
Detaching the control panel  
When detaching or attaching the control panel,  
be careful not to damage the connectors on  
the back of the control panel and on the panel  
holder.  
Detaching the control panel  
Before detaching the control panel, be sure to  
turn off the power.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External component operations  
Playing an external component  
For KD-G614:  
For KD-G514:  
You can connect an external component to the  
CD changer jack on the rear using the Line  
Input Adapter KS-U57 (not supplied), and  
another to the AUX (auxiliary) input jack on the  
control panel.  
• If “EXT IN” does not appear, see page  
21 and select the external input (EXT  
IN).  
For KD-G514:  
You can connect an external component to the  
CD changer jack on the rear using the Line  
Input Adapter KS-U57 (not supplied).  
Ÿ
!
Turn on the connected component  
and start playing the source.  
• For connection, see Installation/Connection  
Manual (separate volume).  
Adjust the volume.  
~
For KD-G614:  
Adjust the sound as you want.  
(See pages 18 and 19.)  
AUX IN : For selecting the external  
component connected to the  
AUX input jack.  
EXT IN : For selecting the external  
component connected to the  
CD changer jack on the rear  
using KS-U57.  
If “EXT IN” does not appear,  
see page 21 and select the  
external input (EXT IN).  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
How to clean the connectors  
To keep discs clean  
Frequent detachment will deteriorate the  
connectors.  
A dirty disc may not play correctly.  
If a disc does become dirty, wipe  
it with a soft cloth in a straight line  
from center to edge.  
To minimize this possibility, periodically wipe  
the connectors with a cotton swab or cloth  
moistened with alcohol, being careful not to  
damage the connectors.  
• Do not use any solvent (for  
example, conventional record cleaner, spray,  
thinner, benzine, etc.) to clean discs.  
To play new discs  
New discs may have some rough  
spots around the inner and outer  
edges. If such a disc is used, this  
receiver may reject the disc.  
Connector  
To remove these rough spots, rub the edges  
with a pencil or ball-point pen, etc.  
Moisture condensation  
Moisture may condense on the lens inside the  
CD player in the following cases:  
• After starting the heater in the car.  
• If it becomes very humid inside the car.  
Should this occur, the CD player may  
malfunction. In this case, eject the disc and  
leave the receiver turned on for a few hours  
until the moisture evaporates.  
How to handle discs  
When removing a disc from  
Center holder  
its case, press down the center  
holder of the case and lift the  
disc out, holding it by the  
edges.  
• Always hold the disc by the edges. Do not  
touch its recording surface.  
When storing a disc into its case, gently insert  
the disc around the center holder (with the  
printed surface facing up).  
• Make sure to store discs into the cases after  
use.  
Do not use the following discs:  
Stick-on  
Sticker  
Sticker  
Warped  
label  
residue  
Disc  
disc  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
More about this receiver  
Inserting a disc  
Basic operations  
• When a disc is inserted upside down,  
“PLEASE” and “EJECT” appear alternately  
on the display. Press 0 to eject the disc.  
• Do not insert 8 cm discs (single CD) and  
unusual shape discs (heart, flower, etc.) into  
Turning on the power  
• By pressing SOURCE on the receiver, you  
can also turn on the power.  
Turning off the power  
the loading slot.  
• If you turn off the power while listening to a  
disc, disc play will start from where playback  
has been stopped previously, next time you  
turn on the power.  
Playing a disc  
• While fast-forwarding or reversing on an MP3  
or WMA disc, you can only hear intermittent  
sounds.  
Selecting the sources  
• When no disc is loaded in the receiver, “CD”  
cannot be selected.  
Playing a CD-R or CD-RW  
• Use only “finalized” CD-Rs or CD-RWs.  
• This receiver can play back only the files of  
the same type which is first detected if a disc  
includes both audio CD (CD-DA) files and  
MP3/WMA files.  
• This receiver can play back multi-session  
discs; however, unclosed sessions will be  
skipped while playing.  
• Some CD-Rs or CD-RWs may not play  
back on this receiver because of their disc  
characteristics, and for the following causes:  
– Discs are dirty or scratched.  
– Moisture condensation occurs on the lens  
inside the receiver.  
– The pickup lens inside the receiver is dirty.  
– CD-R/CD-RW on which the files are  
written with “Packet Write” method.  
– There are improper recording conditions  
(missing data, etc.) or media conditions  
(stain, scratch, warp, etc.).  
• CD-RWs may require a longer readout time  
since the reflectance of CD-RWs is lower  
than that of regular CDs.  
• Do not use the following CD-Rs or CD-RWs:  
– Discs with stickers, labels, or protective seal  
stuck to the surface.  
– Discs on which labels can be directly  
printed by an ink jet printer.  
• Without connecting to the CD changer,  
“CD-CH” cannot be selected.  
Tuner operations  
Storing stations in memory  
• During SSM search...  
– All previously stored stations are erased and  
stations are stored newly.  
– Received stations are preset in No. 1 (lowest  
frequency) to No. 6 (highest frequency).  
– When SSM is over, the station stored in  
No. 1 will be automatically tuned in.  
• When storing a station manually, a previously  
preset station is erased when a new station is  
stored in the same preset number.  
Disc operations  
Caution for DualDisc playback  
• The Non-DVD side of a “DualDisc” does  
not comply with the “Compact Disc Digital  
Audio” standard. Therefore, the use of Non-  
DVD side of a DualDisc on this product may  
not be recommended.  
General  
• This receiver has been designed to reproduce  
CDs/CD Texts, and CD-Rs (Recordable)/  
CD-RWs (Rewritable) in audio CD (CD-DA),  
MP3 and WMA format.  
• When a disc has been loaded, selecting “CD”  
for the playback source starts disc play.  
Using these discs under high temperatures or  
high humidities may cause malfunctions or  
damages to discs.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– MP3 files encoded in an unappropriated  
format.  
Playing an MP3/WMA disc  
• This receiver can play back MP3/WMA files  
with the extension code <.mp3> or <.wma>  
(regardless of the letter case—upper/lower).  
• This receiver can show the names of albums,  
artists (performer), and ID3 Tag (Version 1.0,  
1.1, 2.2, 2.3, or 2.4) for MP3 files and for  
WMA files.  
• This receiver can display only one-byte  
characters. No other characters can be  
correctly displayed.  
– MP3 files encoded with Layer 1/2.  
– WMA files encoded with lossless,  
professional, and voice format.  
– WMA files which are not based upon  
Windows Media® Audio.  
– WMA files copy-protected with DRM.  
– Files which have the data such as WAVE,  
ATRAC3, etc.  
• The search function works but search speed is  
not constant.  
• This receiver can play back MP3/WMA files  
meeting the conditions below:  
– Bit rate: 8 kbps — 320 kbps  
Changing the source  
• If you change the source, playback also stops  
(without ejecting the disc).  
Next time you select “CD” for the playback  
source, disc play starts from where it has been  
stopped previously.  
– Sampling frequency:  
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)  
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)  
– Disc format: ISO 9660 Level 1/ Level 2,  
Romeo, Joliet, Windows long file name  
• The maximum number of characters for file/  
folder names vary among the disc format used  
(includes 4 extension characters—<.mp3> or  
<.wma>).  
– ISO 9660 Level 1: up to 12 characters  
– ISO 9660 Level 2: up to 31 characters  
– Romeo*: up to 128 (72) characters  
– Joliet*: up to 64 (36) characters  
– Windows long file name*: up to 128 (72)  
characters  
* The parenthetic figure is the maximum  
number of characters for file/folder names  
in case the total number of files and folders  
is 313 or more.  
• This receiver can recognize the total of 512  
files, of 200 folders, and of 8 hierarchies.  
• This receiver can play back the files recorded  
in VBR (variable bit rate).  
Ejecting a disc  
• If the ejected disc is not removed within  
15 seconds, the disc is automatically inserted  
again into the loading slot to prevent it from  
dust. (Disc will not play this time.)  
General settings—PSM  
• If you change the “AMP GAIN” setting from  
“HIGH PWR” to “LOW PWR” while the  
volume level is set higher than “VOL 30,” the  
receiver automatically changes the volume  
level to “VOL 30.”  
Other main functions (only for  
KD-G614)  
• If you try to assign a title to a 31st disc or to  
the 31st station frequency, “NAMEFULL”  
flashes on the display. Delete unwanted titles  
before assignment.  
• Titles assigned to discs in the CD changer can  
also be shown if you playback the disc from  
the receiver.  
The files recorded in VBR have a discrepancy  
in elapsed time display, and do not show  
the actual elapsed time. Especially, after  
performing the search function, this difference  
becomes noticeable.  
• This receiver cannot play back the following  
files:  
– MP3 files encoded with MP3i and MP3  
PRO format.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
What appears to be trouble is not always serious. Check the following points before calling a service  
center.  
Symptoms  
Causes  
Remedies  
• Sound cannot be heard  
from the speakers.  
The volume level is set to  
the minimum level.  
Adjust it to the optimum  
level.  
Connections are incorrect.  
Check the cords and  
connections.  
• The receiver does not  
work at all.  
The built-in microcomputer Reset the receiver (see page  
may have functioned  
2).  
incorrectly due to noise, etc.  
• SSM automatic presetting Signals are too weak.  
does not work.  
Store stations manually.  
• Static noise while listening The antenna is not connected Connect the antenna firmly.  
to the radio.  
firmly.  
• Disc cannot be played  
back.  
Disc is inserted upside  
down.  
Insert the disc correctly.  
• CD-R/CD-RW cannot be  
played back.  
CD-R/CD-RW is not  
finalized.  
• Insert a finalized CD-R/  
CD-RW.  
• Tracks on the CD-R/  
CD-RW cannot be  
skipped.  
Finalize the CD-R/CD-RW  
with the component which  
you used for recording.  
• Disc can be neither played Disc is locked.  
back nor ejected.  
Unlock the disc (see page  
15).  
The CD player may have  
functioned incorrectly.  
Eject the disc forcibly (see  
page 2).  
• Disc sound is sometimes  
interrupted.  
You are driving on rough  
roads.  
Stop playback while driving  
on rough roads.  
Disc is scratched.  
Change the disc.  
Connections are incorrect.  
Check the cords and  
connections.  
• “NO DISC” appears on  
the display.  
Disc is inserted incorrectly.  
Insert the disc correctly.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptoms  
Causes  
Remedies  
• Disc cannot be played  
back.  
No MP3/WMA tracks are  
recorded on the disc.  
Change the disc.  
MP3/WMA tracks do not  
have the extension code  
<.mp3> or <.wma> in their  
file names.  
Add the extension code  
<.mp3> or <.wma> to their  
file names.  
MP3/WMA tracks are not  
recorded in the format  
compliant with ISO 9660  
Change the disc.  
(Record MP3/WMA  
tracks using a compliant  
Level 1, Level 2, Romeo, or application.)  
Joliet.  
• Noise is generated.  
The track played back is not Skip to another track or  
an MP3/WMA file (although change the disc. (Do not add  
it has the extension code  
<.mp3> or <.wma>).  
the extension code <.mp3>  
or <.wma> to non-MP3 or  
WMA tracks.)  
• A longer readout time is  
Readout time varies due to  
Do not use too many  
required (“CHECK” keeps the complexity of the folder/ hierarchies and folders.  
flashing on the display).  
file configuration.  
• Tracks cannot be played  
Playback order is determined  
back as you have intended when the files are recorded.  
them to play.  
• Elapsed playing time is  
not correct.  
This sometimes occurs  
during play. This is caused  
by how the tracks are  
recorded on the disc.  
• “NO FILES” appears on  
the display.  
The current disc does not  
contain any MP3/WMA  
tracks.  
Insert a disc that contains  
MP3/WMA tracks.  
• Correct characters are  
not displayed (e.g. album  
name).  
This receiver can only  
display alphabets (capital:  
A – Z), numbers, and a  
limited number of symbols.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptoms  
Causes  
Remedies  
• “NO DISC” appears on  
the display.  
No disc is in the magazine.  
Insert disc into the magazine.  
Disc is inserted upside down. Insert disc correctly.  
• “NO MAG” appears on  
the display.  
No magazine is loaded in the Insert the magazine.  
CD changer.  
• “RESET 8” appears on the This receiver is not  
Connect this receiver and the  
display.  
connected to the CD changer CD changer correctly and  
correctly.  
press the reset button of the  
CD changer.  
• “RESET 1” – “RESET 7”  
appears on the display.  
Press the reset button of the  
CD changer.  
• The CD changer does not  
work at all.  
The built-in microcomputer Reset the receiver (see page  
may function incorrectly due 2).  
to noise, etc.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AUDIO AMPLIFIER SECTION  
Maximum Power Output:  
CD PLAYER SECTION  
Type: Compact disc player  
Front: 50 W per channel  
Rear: 50 W per channel  
Signal Detection System: Non-contact optical  
pickup (semiconductor laser)  
Continuous Power Output (RMS):  
Front: 19 W per channel into 4 , 40 Hz  
to 20 000 Hz at no more than 0.8%  
total harmonic distortion.  
Number of Channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Dynamic Range:  
96 dB  
Signal-to-Noise Ratio: 98 dB  
Wow and Flutter: Less than measurable limit  
MP3 Decoding Format:  
Rear: 19 W per channel into 4 , 40 Hz  
to 20 000 Hz at no more than 0.8%  
total harmonic distortion.  
MPEG1/2 Audio Layer 3  
Load Impedance: 4 (4 to 8 allowance)  
Max. Bit Rate: 320 kbps  
Tone Control Range:  
WMA (Windows Media® Audio) Decoding  
Format:  
Bass:  
10 dB at 100 Hz  
Treble: 10 dB at 10 kHz  
Frequency Response: 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio: 70 dB  
Line-Out Level/Impedance:  
2.5 V/20 kload (full scale)  
Output Impedance: 1 kΩ  
Subwoofer-Out Level/Impedance:  
KD-G614:  
Max. Bit Rate: 192 kbps  
GENERAL  
Power Requirement:  
Operating Voltage:  
DC 14.4 V (11 V to 16 V allowance)  
Grounding System: Negative ground  
Allowable Operating Temperature:  
0°C to +40°C  
Dimensions (W × H × D):  
Installation Size (approx.):  
182 mm × 52 mm × 150 mm  
Panel Size (approx.):  
2.0 V/20 kload (full scale)  
Other Terminals:  
CD changer, SUBWOOFER (only for  
KD-G614)  
TUNER SECTION  
Frequency Range:  
188 mm × 58 mm × 11 mm  
Mass (approx.):  
FM: 87.5 MHz to 108.0 MHz  
AM: 531 kHz to 1 602 kHz  
1.5 kg (excluding accessories)  
[FM Tuner]  
Usable Sensitivity: 11.3 dBf (1.0 µV/75 )  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 )  
Design and specifications are subject to change  
without notice.  
Alternate Channel Selectivity (400 kHz): 65 dB  
Frequency Response: 40 Hz to 15 000 Hz  
Stereo Separation: 35 dB  
• Microsoft and Windows Media are either  
registered trademarks or trademarks of  
Microsoft Corporation in the United States  
and/or other countries.  
Capture Ratio: 1.5 dB  
[AM Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
EN  
© 2004 Victor Company of Japan, Limited  
1204DTSMDTJEIN  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KD-G614/KD-G514  
Installation/Connection Manual  
GET0305-002A  
[UI]  
1204DTSMDTJEIN  
EN  
This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC  
car audio dealers.  
Parts list for installation and connection  
The following parts are provided for this receiver.  
After checking them, please set them correctly.  
E
F
A / B  
C
D
Power cord  
Washer (ø5)  
Hard case/Control panel  
Sleeve  
Trim plate  
K
H
I
J
L
G
Remote controller  
Mounting bolt (M5 x 20 mm)  
Rubber cushion  
Handles  
Battery  
Lock nut (M5)  
INSTALLATION (IN-DASH MOUNTING)  
The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits.  
• If you are not sure how to install this receiver correctly, have it installed by a qualified technician.  
Do the required electrical connections.  
*1 When you stand the receiver,  
be careful not to damage the  
fuse on the rear.  
Bend the appropriate tabs to hold  
the sleeve firmly in place.  
Removing the receiver  
Before removing the receiver, release the rear section.  
When using the optional stay  
When installing the receiver without using the sleeve  
In a Toyota for example, first remove the car radio and install the receiver in  
its place.  
Stay (option)  
Fire wall  
* Not included for this receiver.  
Flat type screws  
(M5 x 8 mm)*  
Bracket*  
Dashboard  
Screw (option)  
Flat type screws  
(M5 x 8 mm)*  
Pocket  
Insert the two handles, then  
pull them as illustrated so  
that the receiver can be  
removed.  
Bracket*  
Note : When installing the receiver on the mounting bracket, make sure  
to use the 8 mm-long screws. If longer screws are used, they could  
damage the receiver.  
Install the receiver at an  
angle of less than 30˚.  
PRECAUTIONS on power supply and speaker connections:  
DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the receiver will be seriously  
damaged.  
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.  
TROUBLESHOOTING  
The fuse blows.  
* Are the red and black leads connected correctly?  
Power cannot be turned on.  
* Is the yellow lead connected?  
No sound from the speakers.  
* Is the speaker output lead short-circuited?  
Sound is distorted.  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
Noise interfere with sounds.  
* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?  
Receiver becomes hot.  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers grounded in common?  
This receiver does not work at all.  
* Have you reset your receiver?  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
ELECTRICAL CONNECTIONS  
To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical connections before installing the receiver.  
Be sure to ground this receiver to the car’s chassis again after installation.  
Notes:  
• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC car audio dealer.  
• It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 to 8 ).  
If the maximum power is less than 50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see page 21 of the INSTRUCTIONS).  
• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.  
Heat sink  
• The heat sink becomes very hot after use. Be careful not to touch it when removing this receiver.  
Typical Connections  
A
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver.  
The leads of the power cord and those of the connector from the car body may be different in color.  
1 Connect the colored leads of the power cord in the order specified in the illustration below.  
2 Connect the antenna cord.  
3 Finally connect the wiring harness to the receiver.  
3
SUBWOOFER*3  
*
Only for KD-G614 (see diagram  
)
To CD changer or another external component (see diagram  
)
Rear ground  
terminal  
1
*
Not included for this receiver  
Ignition switch  
15 A fuse  
Antenna terminal  
Line out (see diagram  
)
Black  
To metallic body or chassis of the car  
Yellow*2  
Red  
To a live terminal in the fuse block connecting to the car battery  
(bypassing the ignition switch) (constant 12 V)  
To an accessory terminal in the fuse block  
Fuse block  
Blue  
To the automatic antenna if any  
(250 mA max.)  
2
*
Before checking the operation of this  
receiver prior to installation, this lead must  
be connected, otherwise power cannot be  
turned on.  
Blue with white stripe  
To the remote lead of other equipment (200 mA max.)  
To car light control switch  
Orange with white stripe  
Brown  
To cellular phone system—only for KD-G614  
White with black stripe  
White  
Gray with black stripe  
Gray  
Green with black stripe  
Green  
Purple with black stripe  
Purple  
Right speaker (front)  
Left speaker (rear)  
Right speaker (rear)  
Left speaker (front)  
B Connecting the external amplifiers  
You can connect amplifiers to upgrade your car stereo system.  
• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this receiver.  
Disconnect the speakers from this receiver, connect them to the amplifier. Leave the speaker leads of this receiver unused.  
Y-connector (not supplied for this receiver)  
Remote lead  
To the remote lead of other equipment or auto antenna if any  
Remote lead (Blue with white stripe)  
Only for KD-G614  
Rear speakers  
JVC Amplifier  
JVC Amplifier  
Subwoofer  
Only for KD-G614  
4
Front speakers  
*
Firmly attach the ground wire to the  
metallic body or to the chassis of the  
car—to the place not coated with paint  
(if coated with paint, remove the paint  
before attaching the wire). Failure to do  
so may cause damage to the receiver.  
Front speakers  
JVC Amplifier  
5
Signal cord (not supplied for this receiver)  
*
C Connecting the external components  
CD changer  
External component  
• Refer also to page 13 of the INSTRUCTIONS.  
• Set “EXT IN” to “EXT IN” (See page 21 of the INSTRUCTIONS.)  
KS-U57*8  
6
Connecting cord supplied for  
your CD changer  
*
7
Only for KD-G614  
*
JVC CD changer  
CAUTION:  
External component  
• Before connecting the CD  
changer, make sure that the  
receiver is turned off.  
CD changer jack  
8
Line Input Adapter KS-U57  
*
(not supplied for this receiver)  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia DVD Player NS BRDVD3 User Manual
Insignia Flat Panel Television NS L7HTV 10A User Manual
Insignia Radio NS HDRAD User Manual
Integra Stereo Receiver DTR 71 User Manual
Invacare Mobility Aid Comfort Mate Extra Comfort Mate Extra Base User Manual
JAI Digital Camera TM 2016 8 8CL User Manual
JVC Digital Camera VN T16 U User Manual
Kenmore Refrigerator 7957130 K User Manual
Klipsch Speaker RF 82 User Manual
Kramer Electronics Computer Drive FC 2 User Manual