JVC Car Stereo System GET0195 001A User Manual

CD RECEIVER  
CD-RECEIVER  
RECEPTEUR CD  
CD-RECEIVER  
KD-G401  
KD-G401  
• This unit is equipped with the display demonstration. To cancel it, see page 6.  
• Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf  
Seite 6 wird beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.  
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler,  
référez-vous à la page 6.  
• Dit toestel heeft een display-demonstratiefunctie. Zie bladzijde 6 voor het annuleren van  
deze functie.  
For installation and connections, refer to the separate manual.  
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.  
Pour l’installation et les raccordements, se référer au manuel séparé.  
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de  
desbetreffende handleiding.  
INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
MANUEL DINSTRUCTIONS  
GEBRUIKSAANWIJZING  
GET0195-001A  
[E/EX]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing a JVC product. Please read all instructions carefully before operation,  
to ensure your complete understanding and to obtain the best possible performance from the unit.  
CONTENTS  
How to reset your unit ...............................  
How to use the MODE button ...................  
2
2
MP3 INTRODUCTION ...................... 23  
What is MP3?............................................ 23  
How are MP3 files recorded and played  
LOCATION OF THE BUTTONS ............  
4
4
back? ...................................................... 23  
Control panel.............................................  
MP3 OPERATIONS ......................... 24  
Playing an MP3 disc ................................. 24  
Locating a file or a particular portion  
BASIC OPERATIONS .......................  
Turning on the power ................................  
Canceling the display demonstration ........  
Setting the clock........................................  
5
5
6
7
on a disc ................................................. 25  
Selecting MP3 playback modes ................ 27  
RADIO OPERATIONS ......................  
8
SOUND ADJUSTMENTS ................... 28  
Selecting preset sound modes  
Listening to the radio.................................  
8
Storing stations in memory ....................... 10  
Tuning in to a preset station ...................... 11  
(C-EQ: custom equalizer) ....................... 28  
Adjusting the sound .................................. 29  
RDS OPERATIONS ......................... 12  
What you can do with RDS ....................... 12  
Other convenient RDS functions and  
OTHER MAIN FUNCTIONS ................ 30  
Changing the general settings (PSM) ....... 30  
Detaching the control panel ...................... 33  
adjustments ............................................ 17  
USING THE REMOTE CONTROLLER ..... 34  
CD OPERATIONS ........................... 19  
Playing a CD ............................................. 19  
Locating a track or a particular portion  
Location of the buttons.............................. 35  
TROUBLESHOOTING ...................... 36  
on a CD .................................................. 20  
Selecting CD playback modes .................. 21  
Playing a CD Text ...................................... 22  
Prohibiting disc ejection ............................ 22  
MAINTENANCE ............................. 38  
Handling discs........................................... 38  
SPECIFICATIONS ........................... 39  
Note:  
For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on  
the unit’s chassis. Keep the card in a safe place, as it will help the authorities to identify your unit if stolen.  
BEFORE USE  
*For safety....  
*Temperature inside the car....  
If you have parked the car for a long time in hot or  
cold weather, wait until the temperature in the car  
becomes normal before operating the unit.  
• Do not raise the volume level too much, as this will  
block outside sounds, making driving dangerous.  
• Stop the car before performing any complicated  
operations.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF THE BUTTONS  
Control panel  
Display window  
KD-G401  
1
(standby/on attenuator) button  
s (down) button  
10 button  
2 SEL (select) button  
3 FM/AM button  
4 CD button  
5 Loading slot  
6 Display window  
7 0 (eject) button  
8 TP PTY (traffic programme/programme type)  
button  
9 Remote sensor  
You can control this unit with an optionally  
purchased remote controller.  
p 5 (up) button  
+10 button  
q Control dial  
w Number buttons  
e EQ (equalizer) button  
r MO (monaural) button  
t SSM (Strong-station Sequential Memory)  
button  
y RPT (repeat) button  
u RND (random) button  
i MODE button  
Display window  
d Tuner reception indicators  
MO (monaural), ST (stereo)  
f RDS indicators  
TP, PTY, AF, REG  
g MP3 indicator  
h CD indicator  
j Playback mode/item indicators  
RND (random),  
RPT (repeat)  
k LOUD (loudness) indicator  
l EQ (equalizer) indicator  
/ Sound mode (C-EQ: custom equalizer)  
indicators  
ROCK, CLASSIC, POPS, HIP HOP, JAZZ,  
USER  
z Disc information indicators  
TAG (ID3 Tag),  
x Main display  
c Source display  
Volume level indicator  
v Tr (track) indicator  
(disc),  
(folder),  
(folder),  
(track/file)  
o DISP (display) button  
;
a
4/¢  
(control panel release) button  
buttons  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
1
3
2
Turning on the power  
4 Adjust the sound as you want.  
(See pages 28 and 29.)  
1 Turn on the power.  
To drop the volume in a moment  
Press  
briefly while listening to any  
source. ATTstarts flashing on the display, and  
the volume level will drop in a moment.  
To resume the previous volume level, press the  
button briefly again.  
If you turn the control dial, you can also restore  
the sound.  
Note on One-Touch Operation:  
When you select a source in step 2 below, the  
power automatically comes on. You do not have  
to press this button to turn on the power.  
2 Select the source.  
To turn off the power  
Press and hold  
second.  
for more than one  
To operate the tuner (FM or AM),  
see pages 8 – 18.  
To play a CD,  
see pages 19 – 22.  
To play an MP3 disc,  
see pages 24 – 27.  
SEE YOUappears, then the unit turns off.  
If you turn off the power while listening to a  
disc, disc play will start from where playback  
has been stopped previously, next time you  
turn on the power.  
3 Adjust the volume.  
To increase the volume  
To decrease the volume  
CAUTION on Volume Setting:  
Discs produce very little noise compared with  
other sources. If the volume level is adjusted for  
the tuner, for example, the speakers may be  
damaged by the sudden increase in the output  
level. Therefore, lower the volume before playing a  
disc and adjust it as required during playback.  
Volume level appears.  
Volume level indicator  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Canceling the display  
demonstration  
3 Select “DEMO OFF.”  
When shipped from the factory, display  
demonstration has been activated, and starts  
automatically when no operations are done for  
about 20 seconds.  
DEMO OFF  
DEMO ON  
It is recommended to cancel the display  
demonstration before you use the unit for the  
first time.  
To cancel the display demonstration, follow  
the procedure below:  
4 Finish the setting.  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 31.)  
To activate the display demonstration, repeat  
the same procedure and select DEMO ONin  
step 3.  
2 Select “DEMO” if not shown on the  
display.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the clock  
5 Finish the setting.  
You can also set the clock system to either  
24 hours or 12 hours.  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 31.)  
To check the current clock time or change the  
display mode  
Press DISP (display) repeatedly.  
Each time you press the button, the  
display changes as follows:  
• During AM and FM non-RDS station  
operation:  
2 Set the hour.  
1 Select CLOCK H(hour) if not shown on  
the display.  
Frequency  
Clock  
2 Adjust the hour.  
1
2
During FM RDS Station operation:  
Station name Station frequency  
Clock  
Programme type  
3 Set the minute.  
During disc operation:  
1 Select CLOCK M(minute).  
2 Adjust the minute.  
Elapsed  
playing time  
Clock  
1
2
Disc title /  
performer  
Track title  
Notes:  
• While playing a conventional CD, “NO NAME”  
appears for the disc title/performer and the track  
title.  
For indication change while playing a CD Text or  
an MP3 disc, see also pages 22 and 25.  
4 Set the clock system.  
1 Select 24H/12H.”  
2 Select 24Hor 12H.”  
1
2
During power off:  
The power turns on and the clock time is  
shown for 5 seconds, then the power turns off.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO OPERATIONS  
Listening to the radio  
2 Start searching for a station.  
To search for stations of  
higher frequencies  
You can use either automatic searching or manual  
searching to tune in to a particular station.  
To search for stations of lower frequencies  
When a station is received, searching stops.  
Searching for a station automatically:  
Auto search  
1 Select the band (FM1 – 3, AM).  
To stop searching before a station is  
received, press the same button you have  
pressed for searching.  
Each time you press the  
button, the band changes as  
follows:  
FM1  
FM2  
FM3  
AM  
Lights up when receiving an FM stereo  
broadcast with sufficient signal strength.  
Selected band appears.  
Note:  
This receiver has three FM bands (FM1, FM2,  
FM3). You can use any one of them to listen to  
an FM broadcast.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
When an FM stereo broadcast is hard to  
receive  
Searching for a station manually:  
Manual search  
1 Press MODE to enter the  
functions mode while listening  
to an FM stereo broadcast.  
1 Select the band (FM1 – 3, AM).  
Each time you press the  
button, the band changes as  
follows:  
2 Press MO (monaural), while  
“MODE” is still flashing on the  
display, so that “MONO”  
appears on the display.  
FM1  
FM2  
FM3  
AM  
Each time you press the button,  
monaural mode turns on and off  
alternately.  
Note:  
This receiver has three FM bands (FM1, FM2,  
FM3). You can use any one of them to listen to  
an FM broadcast.  
MO (monaural) indicator  
2 Press and hold ¢  
or  
4
until “M” (manual) starts flashing on  
the display.  
When the MO indicator is lit on the display, the  
sound you hear becomes monaural but the  
reception will be improved.  
3 Tune in to a station you want while  
“M” (manual) is still flashing.  
To tune in to stations of  
higher frequencies  
To tune in to stations of lower frequencies  
• If you release your finger from the button,  
the manual mode will automatically turns  
off after 5 seconds.  
• If you hold down the button, the frequency  
keeps changing (in 50 kHz intervals for  
FM and 9 kHz for AM—MW/LW) until you  
release the button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Local FM stations with the strongest signals are  
searched and stored automatically in the band  
number you have selected (FM1, FM2, or FM3).  
These stations are preset in the number  
buttons—No.1 (lowest frequency) to No.6  
(highest frequency).  
Storing stations in memory  
You can use one of the following two methods to  
store broadcasting stations in memory.  
• Automatic preset of FM stations: SSM (Strong-  
station Sequential Memory)  
When automatic preset is over, the station stored  
in number button 1 will be automatically tuned in.  
• Manual preset of both FM and AM stations  
FM station automatic preset: SSM  
You can preset 6 local FM stations in each FM  
band (FM1, FM2, and FM3).  
Manual preset  
You can preset up to 6 stations in each band  
(FM1, FM2, FM3, and AM) manually.  
1 Select the FM band (FM1 – 3) you  
Ex.: Storing FM station of 92.5 MHz into the  
preset number 1 of the FM1 band.  
want to store FM stations into.  
Each time you press the  
button, the band changes as  
follows:  
1 Select the band (FM1 – 3, AM) you  
want to store stations into (in this  
example, FM1).  
FM1  
FM2  
FM3  
AM  
Each time you press the  
button, the band changes as  
follows:  
2 Press MODE to enter the functions  
FM1  
FM2  
FM3  
AM  
mode.  
2 Tune in to a station (in this example,  
of 92.5 MHz).  
To tune in to stations of  
higher frequencies  
3 Press and hold SSM for about  
2 seconds.  
To tune in to stations of lower frequencies  
“SSM” flashes, then disappears when  
automatic preset is over.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning in to a preset station  
3 Press and hold the number button  
(in this example, 1) for more than  
2 seconds.  
You can easily tune in to a preset station.  
Remember that you must store stations first. If  
you have not stored them yet, see “Storing  
stations in memory” on pages 10 and 11.  
1 Select the band (FM1 – 3, AM).  
Each time you press the  
button, the band changes as  
follows:  
FM1  
FM2  
FM3  
AM  
Preset number flashes for a while.  
4 Repeat the above procedure to store  
other stations into other preset  
numbers.  
2 Select the number (1 – 6) for the  
preset station you want.  
Notes:  
• A previously preset station is erased when a new  
station is stored in the same preset number.  
• Preset stations are erased when the power supply to  
the memory circuit is interrupted (for example,  
during battery replacement). If this occurs, preset  
the stations again.  
Note:  
You can also use the 5 (up) or (down) button on  
the unit to select the next or previous preset stations.  
Each time you press the 5 (up) or (down) button,  
the next or previous preset station is tuned in.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RDS OPERATIONS  
What you can do with RDS  
To use Network-Tracking Reception  
You can select the different modes of network-  
tracking reception to continue listening to the  
same programme in its finest reception.  
RDS (Radio Data System) allows FM stations to  
send an additional signal along with their regular  
programme signals. For example, the stations  
send their station names, as well as information  
about what type of programme they broadcast,  
such as sports or music, etc.  
Another advantage of RDS function is called  
“Enhanced Other Networks.By using the  
Enhanced Other Networks data sent from a  
station, you can tune in to a different station of a  
different network broadcasting your favorite  
programme or traffic announcement while  
listening to another programme or to another  
source such as CD.  
When shipped from the factory, AF” is selected.  
• AF:  
Network-Tracking Reception is  
activated with Regionalization set to  
“off.”  
With this setting, the unit switches to  
another station within the same  
network when the received signals  
from the current station become  
weak. (In this mode, the programme  
may differ from the one currently  
received.)  
The AF indicator lights up but the  
REG indicator does not.  
By receiving the RDS data, this unit can do the  
following:  
Tracing the same programme automatically  
(Network-Tracking Reception)  
• Standby Reception of TA (Traffic  
Announcement) or your favorite programme  
• PTY (Programme Type) search  
• Programme search  
• AF REG: Network-Tracking Reception is  
activated with Regionalization set to  
“on.”  
With this setting, the unit switches to  
another station, within the same  
network, broadcasting the same  
programme when the received  
signals from the current station  
become weak.  
• And some other functions  
Tracing the same programme  
automatically (Network-Tracking  
Reception)  
Both the AF indicator and the REG  
indicator light up.  
• OFF:  
Network-Tracking Reception is  
deactivated.  
Neither the AF indicator nor the REG  
indicator lights up.  
When driving in an area where FM reception is  
not good, the tuner built in this unit automatically  
tunes in to another RDS station, broadcasting the  
same programme with stronger signals. So, you  
can continue to listen to the same programme in  
its finest reception, no matter where you drive.  
(See the illustration on page 18.)  
AF indicator  
REG indicator  
Two types of the RDS data are used to make  
Network-Tracking Reception work correctly  
—PI (Programme Identification) and AF  
(Alternative Frequency).  
Without receiving these data correctly from the  
RDS station you are listening to, Network-  
Tracking Reception will not operate.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using TA Standby Reception  
TA Standby Reception allows the unit to switch  
temporarily to Traffic Announcement (TA) from  
the current source (another FM station or CD).  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 31.)  
• TA Standby Reception will not work if you are  
listening to an AM station.  
Press TP PTY to activate TA Standby Reception.  
2 Select “AF-REG” (alternative  
frequency/regionalization reception)  
if not shown on the display.  
7 When the current source is FM, the TP  
indicator either lights up or flashes.  
• If the TP indicator lights up, TA Standby  
Reception is activated.  
If a station starts broadcasting a traffic  
announcement, “TRAFFIC” appears on the  
display, and this unit automatically tunes in to  
the station. The volume changes to the  
preset TA volume level (see page 17) and the  
traffic announcement can be heard.  
3 Select the desired mode—“AF,”  
“AF REG,or “OFF.”  
• If the TP indicator flashes, TA Standby  
Reception is not yet activated since the  
station being received does not provide the  
signals used for TA Standby Reception.  
To activate TA Standby Reception, you need  
to tune in to another station providing these  
4 Finish the setting.  
signals. Press ¢  
or  
4 to search  
for such a station.  
When a station providing these signals is  
tuned in, the TP indicator stops flashing and  
remains lit. Now TA Standby Reception is  
activated.  
7 When the current source is other than FM,  
the TP indicator lights up.  
If a station starts broadcasting a traffic  
announcement, “TRAFFIC” appears on the  
display, and this unit automatically changes the  
source and tunes in to the station.  
To deactivate the TA Standby Reception,  
press TP PTY again. The TP indicator  
disappears.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using PTY Standby Reception  
4 Finish the setting.  
PTY Standby Reception allows the unit to switch  
temporarily to your favorite programme (PTY:  
Programme Type) from the current source  
(another FM station or CD).  
• PTY Standby Reception will not work if you are  
listening to an AM station.  
7 When the current source is FM, the PTY  
indicator either lights up or flashes.  
• If the PTY indicator lights up, PTY Standby  
Reception is activated.  
You can select your favorite programme type for  
PTY Standby Reception.  
If a station starts broadcasting the selected  
PTY programme, this unit automatically  
tunes in to the station.  
When shipped from the factory, PTY Standby  
Reception is turned off. (“OFF” is selected for  
PTY Standby Reception.)  
• If the PTY indicator flashes, PTY Standby  
Reception is not yet activated since the  
station being received does not provide the  
signals used for PTY Standby Reception.  
To activate PTY Standby Reception, you  
need to tune in to another station providing  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(PSM: see page 31.)  
these signals. Press ¢  
or  
4 to  
search for such a station.  
When a station providing these signals is  
tuned in, the PTY indicator stops flashing  
and remains lit. Now PTY Standby Reception  
is activated.  
2 Select “PTY STBY” (standby) if not  
7 When the current source is other than FM,  
the PTY indicator lights up.  
shown on the display.  
If a station starts broadcasting the selected  
PTY programme, this unit automatically  
changes the source and tunes in to the station.  
To deactivate the PTY Standby Reception,  
select “OFF” in step 3 on the left column. The  
PTY indicator disappears.  
3 Select one of the twenty-nine PTY  
codes. (See page 18.)  
Selected code name  
appears on the display  
and is stored into  
memory.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching your favorite programme  
3 Press and hold the number button  
for more than 2 seconds to store the  
PTY code selected into the preset  
number you want.  
You can search any one of the PTY codes.  
In addition, you can store your 6 favorite  
programme types in the number buttons.  
When shipped from the factory, the following  
6 programme types have been stored in the  
number buttons (1 to 6).  
To store your favorite programme types, see  
below.  
To search for your favorite programme type,  
see page 16.  
3
1
2
POP M  
ROCK M  
EASY M  
Selected PTY code and  
“MEMORY” appear  
6
4
5
CLASSICS  
AFFAIRS  
VARIED  
alternately for a while.  
To store your favorite programme types  
1 Press and hold TP PTY for more  
than 2 seconds while listening to an  
FM station.  
4 Press and hold TP PTY for more  
than 2 seconds to exit from this  
mode.  
The last selected PTY code appears.  
2 Select one of the twenty-nine PTY  
codes. (See page 18.)  
Selected code name  
appears on the display.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To search for your favorite programme type  
3 Press ¢  
or  
4 to start PTY  
search for your favorite programme.  
1 Press and hold TP PTY for more  
than 2 seconds while listening to an  
FM station.  
If there is a station broadcasting a programme  
of the same PTY code as you selected, that  
station is tuned in.  
The last selected PTY code appears.  
If there is no station broadcasting a  
programme of the same PTY code as you  
selected, the station will not change.  
2 To select one of your favorite  
programme type  
Note:  
In some areas, the PTY search will not work correctly.  
or  
To select any one of the twenty-nine  
PTY codes.  
Ex.: When ROCK Mis selected  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the TA volume level  
Other convenient RDS  
You can preset the volume level for TA Standby  
Reception. When a traffic programme is received,  
the volume level automatically changes to the  
preset level.  
See also Changing the general settings  
(PSM)on page 30.  
functions and adjustments  
Automatic selection of the station  
when using the number buttons  
Usually when you press the number button, the  
preset station is tuned in.  
1 Press and hold SEL (select) for more than  
2 seconds so that one of the PSM items  
appears on the display.  
However, when the preset station is an RDS  
station, something different will happen. If the  
signals from that preset station are not sufficient  
for good reception, this unit, using the AF data,  
tunes in to another frequency broadcasting the  
same programme as the original preset station is  
broadcasting. (Programme search)  
2 Press ¢  
(volume).  
or  
4 to select TA VOL”  
3 Turn the control dial to set to the desired  
volume.  
You can set it from VOL 00to VOL 30or  
VOL 50(depending on the amplifier gain  
control setting: see page 32).  
The unit takes some time to tune in to another  
station using programme search.  
4 Press SEL (select) to finish the setting.  
To activate programme search, follow the  
procedure below.  
See also Changing the general settings  
(PSM)on page 30.  
Automatic clock adjustment  
When shipped from the factory, the clock built in  
this unit is set to be readjusted automatically  
using the CT (Clock Time) data in the RDS  
signal.  
If you do not want to use automatic clock  
adjustment, follow the procedure below.  
See also Changing the general settings  
(PSM)on page 30.  
1 Press and hold SEL (select) for more than  
2 seconds so that one of the PSM items  
appears on the display.  
2 Press ¢  
or  
4 to select  
P(Programme)-SEARCH.”  
3 Turn the control dial clockwise to select ON.”  
Now programme search is activated.  
4 Press SEL (select) to finish the setting.  
1 Press and hold SEL (select) for more than  
2 seconds so that one of the PSM items  
appears on the display.  
To cancel programme search, repeat the same  
procedure and select OFFin step 3 by turning  
the control dial counterclockwise.  
2 Press ¢  
or  
4 to select AUTO  
ADJ(adjustment).  
3 Turn the control dial counterclockwise to select  
OFF.”  
Now automatic clock adjustment is canceled.  
4 Press SEL (select) to finish the setting.  
To reactivate clock adjustment, repeat the  
same procedure and select ONin step 3 by  
turning the control dial clockwise.  
Note:  
You must stay tuned to the same station for more than  
2 minutes after setting “AUTO ADJ” to “ON.”  
Otherwise, the clock time will not be adjusted. (This is  
because the unit takes up to 2 minutes to capture the  
CT data in the RDS signal.)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PTY codes  
NEWS:  
AFFAIRS:  
News  
SOCIAL:  
Programmes on social  
activities  
Topical programmes expanding  
on current news or affairs  
Programmes which impart  
advice on a wide variety of topics  
Sport events  
RELIGION: Programmes dealing with any  
aspect of belief or faith, or the  
INFO:  
nature of existence or ethics  
SPORT:  
PHONE IN: Programmes where people can  
express their views either by  
EDUCATE: Educational programmes  
DRAMA: Radio plays  
phone or in a public forum  
CULTURE: Programmes on national or  
regional culture  
TRAVEL:  
LEISURE:  
JAZZ:  
Programmes about travel  
destinations, package tours,  
and travel ideas and  
opportunities  
Programmes concerned with  
recreational activities such as  
gardening, cooking, fishing,  
etc.  
SCIENCE:  
Programmes on natural science  
and technology  
VARIED:  
Other programmes like comedies  
or ceremonies  
POP M:  
Pop music  
ROCK M:  
EASY M:  
LIGHT M:  
Rock music  
Easy-listening music  
Light music  
Jazz music  
COUNTRY: Country music  
NATION M: Current popular music from  
another nation or region, in that  
countrys language  
OLDIES:  
FOLK M:  
CLASSICS: Classical music  
OTHER M: Other music  
WEATHER: Weather information  
FINANCE: Reports on commerce, trading,  
the Stock Market, etc.  
Classic pop music  
Folk music  
CHILDREN: Entertainment programmes for  
children  
DOCUMENT: Programmes dealing with  
factual matters, presented in an  
investigative style  
The same programme can be received on different frequencies.  
Programme 1  
broadcasting on  
frequency A  
Programme 1  
broadcasting on  
frequency E  
Programme 1  
broadcasting on  
frequency B  
Programme 1  
broadcasting on  
frequency C  
Programme 1  
broadcasting on  
frequency D  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD OPERATIONS  
Refer “MP3 OPERATIONS” on pages 24 to 27 for  
operating MP3 discs.  
Notes:  
• When a CD is inserted upside down, “EJECT”  
appears on the display and the CD automatically  
ejects.  
• If there is no CD in the loading slot, you cannot  
select CD as the source. “NO DISC” appears on  
the display.  
Playing a CD  
Insert a CD into the loading slot.  
The unit turns on, draws  
the CD and starts  
• If the current disc is a CD Text, disc title/performer  
and then track title will automatically appear.  
playback automatically.  
To stop play and eject the CD  
Press 0.  
Note on One-Touch Operation:  
CD play stops and the CD automatically ejects  
from the loading slot. The source changes to the  
tuner (you will hear the last received station).  
• If you change the source, CD play also stops  
(without ejecting the CD).  
Next time you select “CD” as the source, CD  
play starts from where playback has been  
stopped previously.  
When a CD is already in the loading slot, pressing  
CD turns on the unit and starts playback  
automatically.  
CD indicator  
Current source indication  
Notes:  
• If the ejected disc is not removed for about 15 seconds,  
the disc is automatically inserted again into the  
loading slot to protect it from dust.  
(Disc play will not start this time.)  
You can eject the disc even when the unit is turned  
off.  
Total playing time  
of the inserted disc of the inserted disc  
Total track number  
Elapsed playing time Current track  
number  
All tracks will be played repeatedly until you stop  
playback.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To go to a track quickly (+10 and –10 buttons)  
Locating a track or a  
particular portion on a CD  
1
Press MODE to enter the functions mode  
while playing a CD.  
To fast-forward or reverse the track  
Press and hold ¢  
playing a CD, to fast-forward the  
track.  
, while  
2
Press +10 or –10.  
To skip 10 tracks* forwards  
to the last track  
Press and hold  
reverse the track.  
4, while playing a CD, to  
To skip 10 tracks* backwards  
to the first track  
To go to the next or previous tracks  
* First time you press +10 or –10 button, the  
track skips to the nearest higher or lower  
track with a track number of multiple ten (ex.  
10th, 20th, 30th).  
Then each time you press the button, you can  
skip 10 tracks (see “How to use the +10 and  
–10 buttons” below).  
Press ¢  
briefly, while  
playing a CD, to go ahead to the  
beginning of the next track.  
Each time you press the button  
consecutively, the beginning of  
the next tracks is located and  
played back.  
• After the last track, the first track will be  
selected, and vice versa.  
Press  
4 briefly, while playing a CD, to go  
back to the beginning of the current track.  
Each time you press the button consecutively,  
the beginning of the previous tracks is located  
and played back.  
How to use the +10 and –10 buttons  
• Ex. 1: To select track number 32 while  
playing track number 6  
To go to a particular track directly  
Press the number button corresponding to the  
track number to start its playback.  
(Three times)  
(Twice)  
Track 6  
\ 10 \ 20 \ 30 \ 31 \ 32  
• Ex. 2 :To select track number 8 while  
playing track number 36  
To select a track number from 1 – 6:  
Press 1 (7) – 6 (12) briefly.  
To select a track number from 7 – 12:  
Press and hold 1 (7) – 6 (12) for more than one  
second.  
(Three times)  
(Twice)  
Track 36  
\ 30 \ 20 \ 10 \ 9 \ 8  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To play back tracks repeatedly  
(Track Repeat Play)  
Selecting CD playback modes  
To play back tracks at random  
(Disc Random Play)  
You can play back the current track repeatedly.  
1 Press MODE to enter the  
functions mode while playing a  
CD.  
You can play back all tracks on the CD at random.  
1 Press MODE to enter the  
functions mode while playing a  
CD.  
2 Press RPT (repeat), while  
“MODE” is still flashing on the  
display, so that “TRK RPT”  
appears on the display.  
2 Press RND (random), while  
“MODE” is still flashing on the  
display, so that “DISC RND”  
appears on the display.  
Each time you press the button,  
track repeat play mode turns on  
and off alternately.  
Each time you press the button,  
disc random play mode turns on  
and off alternately.  
RPT indicator  
RND and  
(disc) indicators  
When track repeat play is turned on, the RPT  
indicator lights up on the display. The current  
track starts playing repeatedly.  
When disc random play is turned on, the  
RND and indicators light up on the display. A  
track randomly selected starts playing.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Prohibiting disc ejection  
Playing a CD Text  
In a CD Text, some information about the disc (its  
disc title, performer, and track title) is recorded.  
This CD Text information will be shown  
You can prohibit disc ejection and can lock a disc  
in the loading slot.  
automatically when you play a CD Text.  
While pressing CD, press and hold 0 for  
more than 2 seconds.  
To change the CD Text information  
manually, select text display mode while  
playing a CD Text.  
Press DISP (display) repeatedly.  
Each time you press the button,  
the display changes as follows:  
“EJECTflashes on the display for about 5 seconds,  
and the disc is locked and cannot be ejected.  
Disc title / performer  
Track title  
To cancel the prohibition and unlock the  
disc  
(
lights up on the display)  
While pressing CD, press and hold 0 again for  
more than 2 seconds.  
“EJECT” appears on the display, and the disc  
ejects from the loading slot.  
Elapsed playing time and  
Current track number  
Clock and  
Current track number  
Notes:  
• The display shows up to 8 characters at one time  
and scrolls if there are more than 8 characters.  
See also “To select the scroll mode—SCROLL” on  
page 32.  
Some characters or symbols will not be shown (and  
be blanked) on the display.  
(Ex. “ABCå!d#” ]“ABCA D ”)  
• When you press DISP (display) while playing a  
conventional CD, “NO NAME” appears for the  
disc title/performer and the track title.  
• When track title is shown, the Tr indicator and  
current track number also appear on the right side  
of the display.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 INTRODUCTION  
What is MP3?  
How are MP3 files recorded  
and played back?  
MP3 is an abbreviation of Motion Picture Experts  
Group (or MPEG) Audio Layer 3. MP3 is simply a  
file format with a data compression ratio of 1:10  
(128 Kbps*).  
MP3 “files (tracks)” can be recorded in “folders”  
—in PC terminology.  
During recording, the files and folders can be  
arranged in a way similar to arranging files and  
folders of computer data.  
Root” is similar to the root of a tree. Every file  
and folder can be linked to and be accessed from  
the root.  
* Bit rate is the average number of bits that one  
second of audio data will consume. The unit used is  
Kbps. To get a better audio quality, choose a higher  
bit rate. The most popular bit rate for encoding is  
128 Kbps.  
The illustration below shows an example of how  
MP3 files are recorded on a CD-R or CD-RW,  
how they are played back, and how they are  
searched for on this unit.  
• For details information about the MP3  
discs, refer to “A Guide to MP3/WMA”  
(separate volume).  
Notes:  
Compatible with ID3 Tag  
• This unit can read a CD-ROM containing MP3  
files. However, if non-MP3 files are recorded  
together with MP3 files, this unit will take a longer  
time to scan the disc. It may also cause the unit to  
malfunction.  
Extra information data such as album title,  
performer name, song title, recording year, music  
genre and a brief comment can be stored within  
an MP3 file.  
• This unit cannot read or play an MP3 file without  
the extension code <.mp3>.  
• This unit is not compatible with MP3 file encoded  
with Layer 1 and Layer 2 formats.  
This unit can show both ID3v1 (Version 1) and  
ID3v2 (Version 2) tags on the display. (See page  
25.)  
• This unit is not compatible with Playlist**.  
• Some characters cannot be shown correctly.  
• If both ID3v1 and ID3v2 are recorded on a  
disc, ID3v2 information will be shown.  
**A playlist is a simple text file, used on a PC, which  
enables users to make their own playback order  
without physically rearranging the files.  
Hierarchy  
Level 1  
ROOT  
Level 2  
Level 3  
Level 4  
Level 5  
6
7
01  
02  
03  
4
3
05  
10  
5
: Folder and their playback  
order  
01  
11  
12  
04  
1
8
9
: MP3 files and their playback  
order  
1
2
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 OPERATIONS  
Refer also to “CD OPERATIONS” on pages  
19 to 22.  
Notes:  
• MP3 discs require a longer readout time.  
(It differs due to the complexity of the folder/file  
configuration.)  
• When playback starts, folder and file names (or ID3  
tags) will automatically appear. (See also page 25.)  
• If you change the source or turn the power off, disc  
playback stops (without ejecting the disc).  
Next time you select the CD player as the source or  
turn the power on, disc play starts from where  
playback has been stopped previously.  
Playing an MP3 disc  
Insert an MP3 disc into the loading slot.  
Note on One-Touch operation:  
When a disc is already in the loading slot, pressing CD  
To stop play and eject the disc  
Press 0.  
turns on the unit and starts playback automatically.  
Playback stops and the disc automatically ejects  
from the loading slot.  
CD indicator  
Current source indication  
MP3 indicator  
Total folder  
number  
Total file  
number  
Ex.: When the disc contains 19 folders and  
144 MP3 files  
All files will be played repeatedly until you stop  
playback.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
To change the display information  
• The display shows up to 8 characters at a time and  
scrolls if there are more than 8 characters.  
See also “To select the scroll mode—SCROLL” on  
page 32.  
• When folder or file name is shown, current folder  
number or the Tr indicator and current file number  
also appear on the right side of the display.  
While playing back an MP3 file, you can change  
the disc information shown on the display.  
Press DISP (display) repeatedly.  
Each time you press the button,  
the display changes to show the  
following:  
• When TAG DISP” is set to “TAG ON”  
(initial setting: see page 32)  
Locating a file or a particular  
portion on a disc  
Album name / performer  
(folder name*)  
(TAG lights up on the display)  
To fast-forward or reverse the file  
Press and hold ¢  
while  
playing a disc, to fast-forward  
the file.  
Track title (file name*)  
(TAG lights up on the display)  
Elapsed playing time and  
Current file number  
Press and hold  
reverse the file.  
4 while playing a disc, to  
Clock and  
Current file number  
Note:  
During this operation, you can only hear intermittent  
sounds. (The elapsed playing time also changes  
intermittently on the display.)  
* If an MP3 file does not have ID3 tags, folder  
name and file name appear. In this case, the  
TAG indicator will not light up on the display.  
To skip to the next or previous files  
• WhenTAG DISPis set toTAG OFF”  
Press ¢  
briefly while  
playing, to skip ahead to the  
beginning of the next file.  
Each time you press the button  
consecutively, the beginning of  
the next files is located and  
played back.  
Folder name  
(
(
lights up on the display)  
File name  
lights up on the display)  
Press  
4 briefly, while playing, to skip back  
Elapsed playing time and  
Current file number  
to the beginning of the current file.  
Each time you press the button consecutively,  
the beginning of the previous files is located and  
played back.  
Clock and  
Current file number  
CONTINUED ON THE NEXT PAGE  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To go to a particular file quickly within the  
current folder (+10 and –10 buttons)  
To go to a particular folder directly  
IMPORTANT:  
1
Press MODE to enter the functions mode  
while playing a disc.  
To directly select the folders using the number  
button(s), it is required that folders are  
assigned 2 digit numbers at the beginning of  
their folder names. (This can only be done  
during the recording of CD-Rs or CD-RWs.)  
Ex.: If folder name is 01 ABC”  
= Press 1 to go to Folder 01 ABC.  
If folder name is 1 ABC,pressing 1  
does not work.  
2
Press +10 or 10.  
To skip 10 files* forwards to  
the last file  
If folder name is 12 ABC”  
= Press and hold 6 (12) to go to Folder  
12 ABC.  
To skip 10 files* backwards to  
the first file  
* First time you press +10 or 10 button, the  
file skips to the nearest higher or lower file  
with a file number of multiple ten (ex. 10th,  
20th, 30th).  
Then each time you press the button, you  
can skip 10 files (see How to use the +10  
and 10 buttonsbelow).  
Press the number button corresponding to the  
folder number to start playing the first file in the  
selected folder.  
After the last file, the first file will be  
selected, and vice versa.  
To select a folder number from 01 06:  
Press 1 (7) 6 (12) briefly.  
To select a folder number from 07 12:  
Press and hold 1 (7) 6 (12) for more than one  
second.  
How to use the +10 and –10 buttons  
Ex. 1: To select file number 32 while playing  
file number 6  
Notes:  
• If  
indicator flashes on the display after you  
(Three times)  
(Twice)  
have selected a folder, it means that the folder does  
not contain any MP3 files.  
File 6  
\ 10 \ 20 \ 30 \ 31 \ 32  
• You cannot directly select a folder with a number  
greater than 12.  
Ex. 2 :To select file number 8 while playing  
file number 36  
To select a particular file in a folder, press  
¢
or  
4 after selecting the folder.  
(Three times)  
(Twice)  
File 36 \ 30 \ 20 \ 10 \ 9 \ 8  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To skip to the next or previous folder  
Active  
indicator  
Mode  
Plays at random  
Press 5 (up) while playing an  
MP3 disc to skip to the next  
folder.  
Each time you press the button  
consecutively, the next folder is  
located (and the first file in the  
folder starts playing, if recorded).  
FLDR RND RND and  
indicators  
All files of the  
current folder, then  
files of the next  
folder and so on.  
light up.  
DISC RND RND and  
indicators  
All files on the disc.  
light up.  
Press (down) while playing an MP3 disc to  
skip back to the previous folder.  
Each time you press the button consecutively,  
the previous folder is located (and the first file in  
the folder starts playing, if recorded).  
To play back files repeatedly  
(Track Repeat/Folder Repeat Play)  
You can play back the current file or all the files  
in the current folder repeatedly.  
Note:  
1 Press MODE to enter the  
functions mode while playing an  
MP3 disc.  
If the folder does not contain any MP3 files, it is  
skipped.  
2 Press RPT (repeat), while  
MODEis still flashing on the  
display, so that TRK RPTor  
FLDR RPTappears on the  
display.  
Selecting MP3 playback modes  
To play back files at random  
(Folder Random/Disc Random Play)  
You can play back all files of the current folder or  
all files on the MP3 disc at random.  
Each time you press the button,  
the repeat play mode changes  
as follows:  
1 Press MODE to enter the  
functions mode while playing an  
MP3 disc.  
TRK RPT  
Canceled  
RPT indicator  
FLDR RPT  
2 Press RND (random), while  
MODEis still flashing on the  
display, so that FLDR RNDor  
DISC RNDappears on the  
display.  
Each time you press the button,  
the random play mode changes  
as follows:  
Ex.: When you select TRK RPT”  
Active  
Mode  
Plays repeatedly  
FLDR RND  
DISC RND  
indicator  
Canceled  
TRK RPT RPT indicator The current (or  
lights up.  
specified) file.  
RND and  
(folder) indicators  
FLDR RPT  
and RPT All files of the  
indicators  
light up.  
current (or  
specified) folder.  
Ex.: When you select FLDR RND”  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND ADJUSTMENTS  
Selecting preset sound modes  
(C-EQ: custom equalizer)  
Indication pattern changes for each  
sound mode except for “USER.”  
You can select a preset sound mode (C-EQ:  
custom equalizer) suitable to the music genre.  
Ex.: When you select “ROCK”  
• There is a time limit in doing the following  
procedure. If the setting is canceled before you  
finish, start from step 1 again.  
Indication  
For:  
Preset values  
BAS TRE LOUD  
1 Press MODE to enter the functions  
USER  
ROCK  
(Flat sound)  
00  
00  
OFF  
ON  
mode.  
Rock or  
+03  
+01  
disco music  
CLASSIC Classical  
music  
+01  
–02  
OFF  
POPS  
Light music  
+04  
+02  
+01  
00  
OFF  
ON  
2 Select the sound mode you want.  
HIP HOP Funk or rap  
music  
Each time you press the  
button, the sound modes  
change as follows:  
JAZZ  
Jazz music  
+02  
+03  
OFF  
Note:  
USER  
ROCK  
CLASSIC  
You can adjust each sound mode to your preference.  
Once you make an adjustment, it is automatically  
stored for the currently selected sound mode. See  
“Adjusting the sound” on page 29.  
JAZZ  
HIP HOP  
ROCK  
POPS  
USER  
CLASSIC  
JAZZ  
HIP HOP  
POPS  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
*
When you adjust the bass, treble, or loudness, the  
adjustment you have made is stored for the  
currently selected sound mode (C-EQ) including  
“USER.”  
If you are using a two-speaker system, set the fader  
level to “00.”  
Normally the control dial works as the volume  
control. So you do not have to select “VOL” to  
adjust the volume level.  
Depending on the amplifier gain control setting.  
(See page 32 for details.)  
Adjusting the sound  
You can adjust the sound characteristics to your  
preference.  
2
3
*
1 Select the item you want to adjust.  
*
Each time you press the  
button, the adjustable items  
change as follows:  
4
*
2 Adjust the setting.  
BAS  
TRE  
FAD  
(bass)  
(treble)  
(fader)  
To increase the level or  
turn on the loudness  
VOL  
LOUD  
BAL  
(volume)  
(loudness)  
(balance)  
To decrease the level or  
turn off the loudness  
Indication  
To do:  
Adjust the bass.  
Range  
BAS*1  
TRE*1  
FAD*2  
BAL  
–06 (min.)  
|
Indication pattern changes as  
you adjust the bass or treble.  
+06 (max.)  
Adjust the treble. –06 (min.)  
|
+06 (max.)  
Adjust the front  
and rear speaker  
balance.  
R06 (Rear only)  
Ex. 1: When you adjust “TRE” (treble)  
|
F06 (Front only)  
Adjust the left  
and right speaker  
balance.  
L06 (Left only)  
|
R06 (Right only)  
LOUD*1  
Boost low and high  
frequencies to  
produce a well-  
balanced sound  
at low volume  
level.  
Ex. 2: When you turn on the loudness  
LOUD ON  
|
LOUD OFF  
3 Repeat steps 1 and 2 to adjust the  
other items.  
VOL*3  
Adjust the volume. 00 (min.)  
|
To reset each sound mode to the factory  
settings, repeat the same procedure and  
reassign the preset values listed in the table on  
page 28.  
30 or 50 (max.)*4  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER MAIN FUNCTIONS  
Changing the general settings  
(PSM)  
4 Repeat steps 2 and 3 to adjust the  
other PSM items if necessary.  
5 Finish the setting.  
You can change the items listed in the table on  
page 31 by using the PSM (Preferred Setting  
Mode) control.  
Basic Procedure  
1 Press and hold SEL (select) for more  
than 2 seconds so that one of the  
PSM items appears on the display.  
(See page 31.)  
2 Select the PSM item you want to  
adjust.  
Ex.: When you select “DIMMER”  
3 Adjust the PSM item selected.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preferred Setting Mode (PSM) items  
• For detailed operations of each PSM items, refer to the pages listed in the table.  
Factory-preset See  
Indications  
Selectable values/items  
DEMO OFF DEMO ON  
0 — 23 (1 — 12)  
00 — 59  
settings  
page  
DEMO  
Display demonstration  
Hour adjustment  
DEMO ON  
6
CLOCK H  
CLOCK M  
24H/12H  
0 (0:00)  
00 (0:00)  
24H  
Minute adjustment  
24/12-hour time display  
7
12H  
OFF  
24H  
ON  
AUTO ADJ Automatic clock setting  
ON  
17  
AF  
AF REG  
AF-REG  
Alternative frequency/  
Regionalization reception  
AF  
12, 13  
OFF  
29 programme types  
(see page 18)  
OFF  
PTY STBY PTY standby  
OFF  
14  
17  
TA VOL  
Traffic announcement  
volume  
VOL 00 — VOL 30 or 50*  
VOL 20  
OFF  
OFF  
ON  
ON  
OFF  
OFF  
17  
32  
P-SEARCH Programme search  
DIMMER  
TEL  
Dimmer mode  
OFF  
MUTING 1  
Telephone muting  
OFF  
32  
32  
MUTING 2  
SCROLL  
Scroll mode  
Tag display  
ONCE  
AUTO  
ONCE  
OFF  
TAG DISP  
TAG OFF  
TAG ON  
TAG ON  
32  
32  
AMP GAIN Amplifier gain control  
LOW PWR  
HIGH PWR  
HIGH PWR  
* Depending on the amplifier gain control setting. (See page 32 for details.)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select the dimmer mode—DIMMER  
You can dim the display at night (according to  
your preference).  
When shipped from the factory, dimmer is  
deactivated.  
To turn the tag display on or off  
TAG DISP  
An MP3 file can contain file information called  
“ID3 Tag” where its album name, performer, track  
title, etc. are recorded.  
There are two versions–ID3v1 (ID3 Tag version  
1) and ID3v2 (ID3 Tag version 2). If both ID3v1  
and ID3v2 are recorded on a disc, ID3v2  
information will be shown.  
• OFF:  
• ON:  
Cancels the dimmer.  
Activates the dimmer.  
When shipped from the factory, TAG ON” is  
selected.  
To select the telephone muting—TEL  
TAG ON:  
Turns on the ID3 tag display while  
playing MP3 files.  
This mode is used when a cellular phone system  
is connected. Depending on the phone system  
used, select either “MUTING 1” or “MUTING 2”  
whichever mutes the sounds from this unit.  
When shipped from the factory, this mode is  
deactivated.  
• If an MP3 file does not have ID3  
tags, folder name and file name  
appear.  
TAG OFF: Turns off the ID3 tag display while  
playing MP3 files. (Only the folder  
name and file name can be  
shown.)  
• MUTING 1: Select if this setting can mute the  
sounds while using the cellular  
phone.  
• MUTING 2: Select if this setting can mute the  
sounds while using the cellular  
phone.  
To select the amplifier gain control  
AMP GAIN  
• OFF:  
Cancels the telephone muting.  
You can change the maximum volume level of  
this unit. When the maximum power of the  
speakers is less than 50 W, select “LOW PWR”  
to prevent them from being damaged.  
When shipped from the factory, HIGH PWR” is  
selected.  
To select the scroll mode—SCROLL  
You can select the scroll mode for the disc  
information (when the entire text cannot be  
shown at once).  
• LOW PWR: You can adjust the volume level  
from “VOL 00” to “VOL 30.”  
When shipped from the factory, scroll mode is set  
to “ONCE.”  
Note:  
• ONCE:  
• AUTO:  
Scrolls only once.  
If you change the setting from  
“HIGH PWR” to “LOW PWR” while  
listening at a volume level more than  
30, the unit automatically changes the  
volume level to “VOL 30.”  
Repeats the scroll (5-second  
intervals in between).  
Cancels scroll mode.  
• OFF:  
Note:  
Even if the scroll mode is set to “OFF,” you can scroll  
the display by pressing DISP (display) for more than  
one second.  
• HIGH PWR:You can adjust the volume level  
from “VOL 00” to “VOL 50.”  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching the control panel  
Detaching the control panel  
1 Insert the left side of the control  
panel into the groove on the panel  
holder.  
You can detach the control panel when leaving  
the car.  
When detaching or attaching the control panel,  
be careful not to damage the connectors on the  
back of the control panel and on the panel  
holder.  
Detaching the control panel  
Before detaching the control panel, be sure to  
turn off the power.  
1 Unlock the control panel.  
2 Press the right side of the control  
panel to fix it to the panel holder.  
2 Lift and pull the control panel out of  
the unit.  
Note on cleaning the connectors:  
If you frequently detach the control panel, the  
connectors will deteriorate.  
To minimize this possibility, periodically wipe the  
connectors with a cotton swab or cloth moistened  
with alcohol, being careful not to damage the  
connectors.  
3 Put the detached control panel into  
the provided case.  
Connectors  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROLLER  
This unit can be remotely controlled as instructed  
3. Return the battery holder.  
here (with an optionally purchased remote  
controller). We recommend that you use remote  
controller RM-RK50 or RM-RK60 with your unit.  
(Ex.: When you are using RM-RK60)  
Insert again the battery holder by pushing it  
until you hear a clicking sound.  
(back side)  
Before using the remote controller:  
• Aim the remote controller directly at the remote  
sensor on the main unit. Make sure there is no  
obstacle in between.  
Remote sensor  
WARNING:  
• Store the battery in a place where children  
cannot reach.  
If a child accidentally swallows the battery,  
consult a doctor immediately.  
• Do not recharge, short, disassemble, or heat the  
battery or dispose of it in a fire.  
Doing any of these things may cause the battery  
to give off heat, crack, or start a fire.  
• Do not leave the battery with other metallic  
materials.  
Doing this may cause the battery to give off  
heat, crack, or start a fire.  
• When throwing away or saving the battery,  
wrap it in tape and insulate; otherwise, the  
battery may start to give off heat, crack, or start  
a fire.  
• Do not expose the remote sensor to strong  
light (direct sunlight or artificial lighting).  
Installing the battery  
When the controllable range or effectiveness  
of the remote controller decreases, replace  
the battery.  
1. Remove the battery holder.  
1) Push out the battery holder in the  
direction indicated by the arrow using a  
ball point pen or a similar tool.  
• Do not poke the battery with tweezers or similar  
tools.  
Doing this may cause the battery to give off  
heat, crack, or start a fire.  
2) Remove the battery holder.  
CAUTION:  
DO NOT leave the remote controller in a place  
(such as dashboards) exposed to direct sunlight  
for a long time. Otherwise, it may be damaged.  
(back side)  
2. Place the battery.  
Slide the battery into the holder with the  
+ side facing upwards so that the battery  
is fixed in the holder.  
Lithium coin  
battery (product  
number: CR2025)  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 • Selects the preset stations while listening to  
the radio.  
Location of the buttons  
Each time you press the button, the preset  
station number increases, and the selected  
station is tuned in.  
RM-RK60  
• Skips to the first file of the previous folder  
while listening to an MP3 disc.  
Each time you press the button, you can  
move to the previous folder and start playing  
the first file.  
4 Selects the sound mode (C-EQ: custom  
equalizer).  
Each time you press the button, the sound  
mode (C-EQ) changes.  
S
5 • Selects the band while listening to the radio.  
Each time you press the button, the band  
changes.  
• Skips to the first file of the next folder while  
listening to an MP3 disc.  
Each time you press the button, you can  
move to the next folder and start playing the  
first file.  
6 Selects the source.  
1 Turns on the unit if pressed when the unit is  
turned off.  
Each time you press the button, the source  
changes.  
Turns off the unit if pressed and held until  
“SEE YOU” appears on the display.  
• Drops the volume level in a moment if  
pressed briefly.  
7 Functions the same as the control dial on the  
main unit.  
Note: These buttons do not function for the  
preferred setting mode adjustment.  
Press again to resume the volume.  
2 • Searches for stations while listening to the  
radio.  
• Fast-forwards or reverses the track/file if  
pressed and held while listening to a disc.  
• Skips to the beginning of the next track/file  
or goes back to the beginning of the current  
(or previous) tracks/files if pressed briefly  
while listening to a disc.  
KD-G401 is equipped with the steering wheel  
remote control function.  
If your car is equipped with the steering wheel  
remote controller, you can operate this unit  
using the controller.  
• See the Installation/Connection Manual  
(separate volume) for connection to utilize  
this function.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
What appears to be trouble is not always serious. Check the following points before calling a service  
center.  
Symptoms  
Causes  
Remedies  
Sound cannot be heard  
from the speakers.  
The volume level is set to the  
minimum level.  
Adjust it to the optimum level.  
Connections are incorrect.  
Check the cords and  
connections.  
This unit does not work  
at all.  
The built-in microcomputer may  
have functioned incorrectly due  
to noise, etc.  
While holding SEL (select),  
press  
(standby/on  
attenuator) for more than  
2 seconds to reset the unit. (The  
clock setting and preset stations  
stored in memory are erased.)  
(See page 2.)  
SSM (Strong-station  
Sequential Memory)  
automatic preset does  
not work.  
Signals are too weak.  
Store stations manually.  
Static noise while  
listening to the radio.  
The aerial is not connected  
firmly.  
Connect the aerial firmly.  
Insert the CD correctly.  
CD automatically ejects.  
CD is inserted upside down.  
CD-R/CD-RW cannot be CD-R/CD-RW is not finalized.  
played back.  
Tracks on the CD-R/CD-  
• Insert a finalized CD-R/  
CD-RW.  
• Finalize the CD-R/CD-RW  
with the component which  
you used for recording.  
RW cannot be skipped.  
CD can be neither  
played back nor ejected.  
CD is locked.  
Unlock the CD.  
(See page 22.)  
The CD player may have  
functioned incorrectly.  
While holding  
(standby/on attenuator), press  
0 (eject) for more than  
2 seconds. Be careful not to  
drop the CD when it is ejected.  
CD sound is sometimes  
interrupted.  
You are driving on rough roads.  
Stop playback while driving on  
rough roads.  
CD is scratched.  
Change the CD.  
Connections are incorrect.  
Check the cords and  
connections.  
• “NO DISCappears on  
the display.  
No CD in the loading slot.  
CD is inserted incorrectly.  
Insert a CD into the loading slot.  
Insert the CD correctly.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptoms  
Causes  
Remedies  
Disc cannot be played  
back.  
No MP3 files are recorded on  
the disc.  
Change the disc.  
MP3 files do not have the  
extension code <.mp3> in their  
file names.  
Add the extension code  
<.mp3> to their file names.  
MP3 files are not recorded in  
the format compliant with ISO  
9660 Level 1, Level 2, Romeo,  
or Joliet.  
Change the disc.  
(Record MP3 files using a  
compliant application.)  
Noise is generated.  
The file played back is not an  
MP3 file (although it has the  
extension code <.mp3>).  
Skip to another file or change  
the disc. (Do not add the  
extension code <.mp3> to non-  
MP3 files.)  
A longer readout time is  
required (CHECK”  
keeps flashing on the  
display).  
Readout time varies due to the  
complexity of the folder/file  
configuration.  
Do not use too many hierarchies  
and folders. Also, do not record  
any other types of audio tracks  
together with MP3 files.  
Files cannot be played  
back as you have  
Playback order is determined  
when the files are recorded.  
intended them to play.  
Elapsed playing time is  
not correct.  
This sometimes occurs during  
play. This is caused by how the  
files are recorded on the disc.  
indicator flashes on  
the display.  
The current folder does not  
contain any MP3 file.  
Select another folder.  
• “NO FILESappears on  
the display.  
The current disc does not  
contain any MP3 file.  
Insert a disc that contains MP3  
files.  
Correct characters are  
This unit can only display  
not displayed (e.g. album alphabets (capital: AZ),  
name).  
numbers, and a limited number  
of symbols.  
About mistracking:  
Mistracking may result from driving on extremely rough roads. This does not damage the unit and the disc,  
but will be annoying.  
We recommend that you stop disc play while driving on such rough roads.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
When playing a CD-R or CD-RW  
Handling discs  
Before playing back CD-Rs or CD-RWs, read  
their instructions or cautions carefully.  
Use only finalizedCD-Rs or CD-RWs.  
Some CD-Rs or CD-RWs may not be played  
back on this unit because of their disc  
characteristics, and for the following reasons:  
Discs are dirty or scratched.  
Moisture condensation on the lens inside the  
unit.  
The pickup lens inside the unit is dirty.  
CD-RWs may require a longer readout time  
since the reflectance of CD-RWs is lower than  
that of regular CDs.  
CD-Rs or CD-RWs are susceptible to high  
temperatures or high humidity, so do not leave  
them inside your car.  
Do not use following CD-Rs or CD-RWs:  
Discs with stickers, labels, or protective seal  
stuck to the surface.  
This unit has been designed to reproduce CDs,  
CD-Rs (Recordable), CD-RWs (Rewritable), and  
CD Texts.  
• This unit is also compatible with MP3 discs.  
How to handle discs  
When removing a disc  
from its case, press down  
the center holder of the case  
and lift the disc out, holding  
it by the edges.  
Center holder  
Always hold the disc by the edges. Do not  
touch its recording surface.  
When storing a disc into its case, gently insert  
the disc around the center holder (with the  
printed surface facing up).  
Make sure to store discs into the cases after  
use.  
Discs on which labels can be directly printed  
by an ink jet printer.  
To keep discs clean  
Using these discs under high temperatures or  
high humidity may cause malfunctions or  
damage to discs. For example,  
Stickers or labels may shrink and warp a  
disc.  
Stickers or labels may be peeled off so discs  
cannot be ejected.  
Print on discs may get sticky.  
A dirty disc may not be played  
correctly. If a disc does become  
dirty, wipe it with a soft cloth in a  
straight line from center to edge.  
To play new discs  
New discs may have some rough  
spots around the inner and outer  
edges. If such a disc is used, this  
unit may reject the disc.  
To remove these rough spots, rub  
the edges with a pencil or ball-point pen, etc.  
Read instructions or cautions about labels and  
printable discs carefully.  
CAUTIONS:  
• Do not insert 8 cm discs (single CDs) into the  
loading slot. (Such discs cannot be ejected.)  
• Do not insert any disc of unusual shape—like a  
heart or flower; otherwise, it will cause a  
malfunction.  
• Do not expose discs to direct sunlight or any  
heat source or place them in a place subject to  
high temperature and humidity. Do not leave  
them in a car.  
Moisture condensation  
Moisture may condense on the lens inside the  
CD player in the following cases:  
After starting the heater in the car.  
If it becomes very humid inside the car.  
Should this occur, the CD player may  
malfunction. In this case, eject the disc and leave  
the unit turned on for a few hours until the  
moisture evaporates.  
• Do not use any solvent (for example,  
conventional record cleaner, spray, thinner,  
benzine, etc.) to clean discs.  
Sticker  
Stick-on  
label  
Sticker  
Disc  
Warped  
disc  
residue  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
CD PLAYER SECTION  
AUDIO AMPLIFIER SECTION  
Maximum Power Output:  
Type: Compact disc player  
Front:  
Rear:  
50 W per channel  
50 W per channel  
Signal Detection System: Non-contact optical  
pickup (semiconductor laser)  
Continuous Power Output (RMS):  
Number of channels: 2 channels (stereo)  
Frequency Response: 5 Hz to 20 000 Hz  
Front:  
19 W per channel into 4 , 40 Hz  
to 20 000 Hz at no more than  
0.8% total harmonic distortion.  
19 W per channel into 4 , 40 Hz  
to 20 000 Hz at no more than  
0.8% total harmonic distortion.  
Dynamic Range:  
96 dB  
Signal-to-Noise Ratio: 98 dB  
Wow and Flutter: Less than measurable limit  
MP3 decoding format:  
Rear:  
MPEG 1/2 Audio Layer 3  
Load Impedance: 4 (4 to 8 allowance)  
Tone Control Range:  
Max. Bit Rate:  
320 Kbps  
Bass:  
Treble:  
10 dB at 100 Hz  
10 dB at 10 kHz  
GENERAL  
Power Requirement:  
Operating Voltage:  
Frequency Response: 40 Hz to 20 000 Hz  
Signal-to-Noise Ratio: 70 dB  
Line-Out Level/Impedance:  
DC 14.4 V (11 V to 16 V allowance)  
Grounding System: Negative ground  
Allowable Operating Temperature:  
0°C to +40°C  
2.0 V/20 kload (full scale)  
Output Impedance: 1 kΩ  
Dimensions (W × H × D):  
Installation Size (approx.):  
182 mm × 52 mm × 150 mm  
Panel Size (approx.):  
TUNER SECTION  
Frequency Range:  
FM:  
AM:  
87.5 MHz to 108.0 MHz  
(MW) 522 kHz to 1 620 kHz  
(LW) 144 kHz to 279 kHz  
188 mm × 58 mm × 11 mm  
Mass (approx.):  
[FM Tuner]  
1.3 kg (excluding accessories)  
Usable Sensitivity:  
11.3 dBf (1.0 µV/75 )  
50 dB Quieting Sensitivity:  
16.3 dBf (1.8 µV/75 )  
Design and specifications are subject to change  
without notice.  
Alternate Channel Selectivity (400 kHz):  
65 dB  
Frequency Response: 40 Hz to 15 000 Hz  
Stereo Separation: 30 dB  
Capture Ratio: 1.5 dB  
[MW Tuner]  
Sensitivity: 20 µV  
Selectivity: 35 dB  
[LW Tuner]  
Sensitivity: 50 µV  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Having TROUBLE with operation?  
Please reset your unit  
Refer to page of How to reset your unit  
Haben Sie PROBLEME mit dem Betrieb?  
Bitte setzen Sie Ihr Gerät zurück  
Siehe Seite Zurücksetzen des Geräts  
Vous avez des PROBLÈMES de fonctionnement?  
Réinitialisez votre appareil  
Référez-vous à la page intitulée Comment réinitialiser votre appareil  
Hebt u PROBLEMEN met de bediening?  
Stel het apparaat terug  
Zie de pagina met de paragraaf Het apparaat terugstellen  
1103KKSMDTJEIN  
EN, GE, FR, NL  
© 2003 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KD-G401  
Installation/Connection Manual  
Einbau/Anschlußanleitung  
Manuel d’installation/raccordement  
Handleiding voor installatie/aansluiting  
GET0195-005A  
[E/EX]  
1103KKSMDTJEIN  
EN, GE, FR, NL  
ENGLISH  
DEUTSCH  
FRANÇAIS  
NEDERLANDS  
This unit is designed to operate on 12 V DC,  
NEGATIVE ground electrical systems. If your  
vehicle does not have this system, a voltage  
inverter is required, which can be purchased at  
JVC IN-CAR ENTERTAINMENT dealers.  
Dieses Gerät ist für einen Betrieb in  
Cet appareil est conçu pour fonctionner sur des  
sources de courant continu de 12 V à masse  
NEGATIVE. Si votre véhicule n’offre pas ce type  
d’alimentation, il vous faut un convertisseur de  
tension, que vous pouvez acheter chez un  
revendeur d’autoradios JVC.  
Dit apparaat mag worden gebruikt bij elektrische  
systemen die werken op 12 V gelijkstroom met  
negatieve aarding. Als uw auto niet is uitgerust  
met een dergelijk systeem, is een spanningsomzetter  
vereist. Dit instrument kan worden aangeschaft bij  
JVC car audio dealers.  
elektrischen Anlagen mit 12 V Gleichstrom  
und (–) Erdung ausgelegt. Verfügt Ihr  
Fahrzeug nicht über diese Anlage, ist ein  
Spannungsinverter erforderlich, der bei JVC  
Autoradiohändler erworben werden kann.  
Teileliste für den Einbau und Anschluß  
Die folgenden Teile werden zusammen mit  
diesem Gerät geliefert.  
Lijst van onderdelen die u bij  
installatie en aansluiting nodig hebt  
De volgende onderdelen worden bij het apparaat  
geleverd.  
Liste des pièces pour l’installation et  
raccordement  
Les pièces suivantes sont fournies avec cet  
appareil.  
Parts list for installation and  
connection  
The following parts are provided for this unit.  
After checking them, please set them correctly.  
Nach ihrer Überprüfung, die Teile richtig einsetzen.  
Installeer ze op de juiste wijze, nadat u ze hebt  
gecontroleerd.  
Après vérification, veuillez les placer correctement.  
D
A / B  
C
Trim plate  
Frontrahmen  
Plaque d’assemblage  
Sierplaat  
Hard case/Control panel  
Etui/Schalttafel  
Etui de transport/Panneau de  
commande  
Sleeve  
Halterung  
Manchon  
Huis  
Behuizing/Bedieningspaneel  
E
F
G
Power cord  
Stromkable  
Cordon d’alimentation  
Stroomkabel  
Washer (ø5)  
Unterlegscheibe (ø5)  
Rondelle (ø5)  
Sluitring (ø5)  
Lock nut (M5)  
Sicherungsmutter (M5)  
Ecrou d’arrêt (M5)  
Contra-moer (M5)  
H
I
J
Mounting bolt (M5 x 20 mm)  
Befestigungsschraube (M5 x 20 mm)  
Boulon de montage (M5 x 20 mm)  
Bevestigingsbout (M5 x 20 mm)  
Rubber cushion  
Gummipuffer  
Amortisseur en caoutchouc  
Rubberdop  
Handles  
Griffe  
Poignées  
Hendels  
INSTALLATION  
EINBAU  
INSTALLATION (MONTAGE  
INSTALLATIE (INBOUW IN  
(IN-DASH MOUNTING)  
The following illustration shows a typical  
(IM ARMATURENBRETT)  
Die folgende Abbildung zeigt einen typischen  
DANS LE TABLEAU DE BORD) HET DASHBOARD)  
Lillustration suivante est un exemple  
d’installation typique. Si vous avez des  
Op de volgende afbeelding kunt u zien hoe de  
installation. If you have any questions or require Einbau. Bei irgendwelchen Fragen oder wenn  
installatie, normaal gesproken, in zijn werk gaat.  
Neem bij vragen of voor meer bijzonderheden over  
inbouwpakketten contact op met uw JVC car audio  
dealer of een dealer of een bedrijf dat  
information regarding installation kits, consult  
your JVC IN-CAR ENTERTAINMENT dealer or  
a company supplying kits.  
• If you are not sure how to install this unit  
correctly, have it installed by a qualified  
technician.  
Sie Informationen hinsichtlich des Einbausatzes questions ou avez besoin d’information sur des  
brauchen, wenden Sie sich an ihren JVC  
Autoradiohändler oder ein Unternehmen das  
diese Einbausätze vertreibt.  
Sind Sie sich über den richtigen Einbau des  
Geräts nicht sicher, lassen Sie es von einem  
qualifizierten Techniker einbauen.  
kits d’installation, consulter votre revendeur  
d’autoradios JVC ou une compagnie  
d’approvisionnement.  
Si l’on n’est pas sûr de pouvoir installer  
correctement cet appareil, le faire installer par  
un technicien qualifié.  
inbouwpakketten levert.  
Als u niet zeker weet hoe u dit apparaat moet  
installeren, kunt u dit beter door een daartoe  
gekwalificeerde technicus laten doen.  
4
!
2
1
Do the required electrical connections.  
Nehmen Sie die erforderlichen  
elektrischen Anschlüsse vor.  
Réalisez les connexions électriques.  
Breng de vereiste elektrische verbindingen  
tot stand.  
B
D
184 mm  
I
53 mm  
C
~
Ÿ
H
3
J
*1 When you stand the unit, be careful  
not to damage the fuse on the rear.  
*1 Beim Aufstellen des Geräts darauf  
achten, daß die Sicherung auf der  
Rückseite nicht beschädigt wird.  
*1 Lorsque vous mettez l’appareil à la  
verticale, faire attention de ne pas  
endommager le fusible situé sur  
@
Bend the appropriate tabs to hold the  
sleeve firmly in place.  
Die geeigneten Zapfen biegen, um  
die Manschette sicher festzuhalten.  
Tordez les languettes appropriées  
pour maintenir le manchon en place.  
Buig de vereiste lipjes zodat de huls goed  
op zijn plaats wordt gehouden.  
¤
C
l’arrière.  
D
1
*
Wanneer u het apparaat rechtop zet,  
moet u erop letten dat u de zekering  
aan de achterkant niet beschadigt.  
*1  
B
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Removing the unit  
Before removing the unit, release the rear  
section.  
Ausbau des Geräts  
Vor dem Ausbau des Geräts den hinteren Teil  
freigeben.  
Retrait de l’appareil  
Avant de retirer l’appareil, libérer la section  
arrière.  
Verwijderen van het apparaat  
Voordat u het apparaat verwijdert, moet u het  
achtergedeelte losmaken.  
Insert the two handles, then pull them as illustrated so that the  
unit can be removed.  
Die beiden Handgriffe einsetzen und dann ziehen wie in der  
Abbildung gezeigt, so daß das Gerät entfernt werden kann.  
Insérez les deux poignées, puis tirez de la façon illustrée de  
façon à retirer l’appareil.  
1
2
3
B
D
Plaats de twee hendels en trek ze vervolgens zoals afgebeeld naar  
voren zodat het toestel kan worden verwijderd.  
J
When using the optional stay / Beim Verwenden der  
Anker-Option / Lors de l’utilisation du hauban en option /  
Wanneer u de steun gebruikt (facultatief)  
When installing the unit without using the sleeve / Beim Einbau des Geräts ohne  
Halterung / Lors de l’installation de l’appareil scans utiliser de manchon / Wanneer u  
het apparaat zonder huis installeert  
In a Toyota for example, first remove the car radio and install the unit in its place.  
Zum Beispiel in einem Toyota zuerst das Autoradio ausbauen und dann das Gerät an seinem Platz einbauen.  
Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la place.  
Voorbeeld: Bij een Toyota moet u eerst de autoradio verwijderen en daarna het apparaat installeren.  
Fire wall  
Feuerwand  
Cloison  
Brandscherm  
Stay (option)  
Flat type screws (M5 x 8 mm)*  
* Not included with this unit.  
Anker (Option)  
Hauban (en option)  
Steun (facultatief)  
Senkkopfschrauben (M5 x 8 mm)*  
* Nicht Teil dieses Geräts.  
Vis à tête plate (M5 x 8 mm) *  
* Non fourni avec cet appareil.  
Platkopschroeven (M5 x 8 mm)*  
* Niet meegeleverd.  
F
H
G
Dashboard  
Bracket*  
Konsole*  
Support *  
Armaturenbrett  
Tableau de bord  
Dashboard  
Screw (option)  
Schraube (Option)  
Vis (en option)  
Flat type screws (M5 x 8 mm)*  
Senkkopfschrauben (M5 x 8 mm)*  
Vis à tête plate (M5 x 8 mm) *  
Platkopschroeven (M5 x 8 mm)*  
Console*  
Pocket  
Taschen  
Poche  
Zak  
Schroef (facultatief)  
C
Bracket*  
Konsole*  
Support *  
Console*  
Note  
:When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws. If longer  
screws are used, they could damage the unit.  
Install the unit at an angle of less than 30˚.  
Stellen Sie das Gerät mit einem Winkel von  
weniger als 30˚ auf.  
Installez l’appareil avec un angle de moins de  
30˚.  
Hinweis  
:Beim Anbringen des Gerät an der Konsole sicherstellen, daß 8 mm lange Schrauben verwendet  
werden. Werden längere Schrauben verwendet, können sie das Gerät beschädigen.  
Remarque :Lors de l’installation de l’appareil sur le support de montage, s’assurer d’utiliser des vis d’une  
longueur de 8 mm. Si des vis plus longues sont utilisées, elles peuvent endommager l’appareil.  
Opmerking :Wanneer u het apparaat aan de bevestigingsklem vastmaakt, moet u de 8 mm lange schroeven gebruiken. Als u  
langere schroeven gebruikt, kan het apparaat worden beschadigd.  
Installeer het toestel met een hoek kleiner dan 30˚.  
ELECTRICAL CONNECTIONS ELEKTRISCHE ANSCHLÜSSE RACCORDEMENTS ELECTRIQUES ELEKTRISCHE VERBINDINGEN  
To prevent short circuits, we recommend that  
you disconnect the battery’s negative terminal  
and make all electrical connections before  
installing the unit.  
Zur Vermeidung von Kurzschlüssen empfehlen  
wir, daß Sie den negativen Batterieanschluß  
abtrennen und alle elektrischen Anschlüsse  
herstellen, bevor das Gerät eingebaut wird.  
Pour éviter tout court-circuit, nous vous  
recommandons de débrancher la borne  
négative de la batterie et d’effectuer tous les  
raccordements électriques avant d’installer  
Om kortsluiting te voorkomen adviseren wij u om de  
minpool van de accu los te maken en alle elektrische  
verbindingen tot stand te brengen voordat u het  
apparaat in de auto installeert.  
Be sure to ground this unit to the car’s  
chassis again after installation.  
Sicherstellen,daß das Gerät nach dem Einbau l’appareil.  
Aard dit toestel beslist weer op het chassis  
van de auto na het installeren.  
a Chassis des Fahrzeugs geerdet wird.  
Assurez-vous de raccorder de nouveau la  
mise à la masse de cet appareil au châssis  
de la voiture après l’installation.  
Notes:  
Hinweise:  
Opmerkingen:  
• Replace the fuse with one of the specified  
rating. If the fuse blows frequently, consult your  
JVC IN-CAR ENTERTAINMENT dealer.  
• It is recommended to connect to the speakers  
Die Sicherung mit einer der entsprechenden  
Nennleistung ersetzen. Brennt die Sicherung  
häufig durch, wenden Sie sich an ihren JVC  
Autoradiohändler.  
Vervang de zekering door een exemplaar met het  
aangegeven vermogen. Als de zekering vaak  
doorslaat, moet u uw JVC car audio dealer  
raadplegen.  
Sluit bij voorkeur luidsprekers met een hoger  
maximaal vermogen dan 50 W (zowel achter als  
voor, met een impedantie van 4 t/m 8 ) aan.  
Indien het maximale vermogen lager dan 50 W is,  
moet u “AMP GAIN” in de andere stand stellen  
zodat de luidsprekers niet kunnen worden  
beschadigd (zie bladzijde 32 van de  
Remarques:  
Remplacer le fusible par un de la valeur  
précisée. Si le fusible saute souvent, consulter  
votre revendeur d’autoradios JVC.  
with maximum power of more than 50 W (both Es wird empfohlen, Lautsprecher mit einer  
at the rear and at the front, with an impedance  
of 4 to 8 ). If the maximum power is less  
than 50 W, change “AMP GAIN” setting to  
prevent the speakers from being damaged  
(see page 32 of the INSTRUCTIONS).  
To prevent short-circuit, cover the terminals of  
the UNUSED leads with insulating tape.  
• The heat sink becomes very hot after use. Be  
careful not to touch it when removing this unit.  
Maximalleistung von mehr als 50 W  
anzuschließen (sowohl hinten als auch vorne,  
mit einer Impedanz von 4 bis 8 ). Wenn die  
Maximalleistung weniger als 50 W beträgt,  
stellen Sie „AMP GAIN“ anders ein, um Schäden  
an den Lautsprechern zu vermeiden (siehe Seite  
32 der BEDIENUNGSANLEITUNG).  
Zur Vermeidung eines Kurzschlusses die  
Anschlußklemmen der NICHT  
VERWENDETEN Leitungen mit  
Il est recommandé de connecter des  
enceintes avec une puissance de plus de 50  
W (les enceintes arrière et les enceintes  
avant, avec une impédance comprise entre  
4 et 8 ). Si la puissance maximum est  
inférieure à 50 W, changez “AMP GAIN” pour  
éviter d’endommager vos enceintes (voir page  
32 du MANUEL D’INSTRUCTIONS).  
Pour éviter les court-circuits, couvrir les  
bornes des fils qui ne sont PAS UTILISÉS  
avec de la bande isolante.  
GEBRUIKSAANWIJZING).  
Om kortsluiting te voorkomen, moet u de  
aansluitklemmen van ONGEBRUIKTE gekleurde  
draden met isolatieband bedekken.  
De warmte-opnemer kan na gebruik erg heet  
worden. Raak de warmte-opnemer niet aan  
wanneer u dit apparaat van zijn plaats haalt.  
Isolierklebeband umwickeln.  
Heat sink  
Abstrahlblech  
Dissipateur de chaleur  
Warmte-opnemer  
Das Abstrahlblech wird nach dem Gebrauch  
sehr heiß. Beim Ausbau des Geräts darauf  
achten, das Abstrahlblech nicht zu berühren.  
Le dissipateur de chaleur devient très chaud  
après usage. Faire attention de ne pas le  
toucher en retirant cet appareil.  
TROUBLESHOOTING  
FEHLERSUCHE  
Die Sicherung brennt durch.  
* Sind die roten und schwarzen Leitungen  
richtig angeschlossen?  
EN CAS DE DIFFICULTES  
PROBLEMEN OPLOSSEN  
The fuse blows.  
Le fusible saute.  
De zekering slaat door.  
* Are the red and black leads connected  
correctly?  
* Les fils rouge et noir sont-ils racordés  
correctement?  
* Zijn de rode en de zwarte draden op de juiste  
manier aangesloten?  
Stromversorgung kann nicht eingeschaltet  
werden.  
* Ist die gelbe Leitung angeschlossen?  
Power cannot be turned on.  
* Is the yellow lead connected?  
Lappareil ne peut pas être mise sous  
tension.  
* Le fil jaune est-elle raccordée?  
De stroom kan niet worden ingeschakeld.  
* Is de gele draad aangesloten?  
No sound from the speakers.  
* Is the speaker output lead short-circuited?  
Er komt geen geluid uit de speakers.  
* Is de uitgaande speakerdraad kortgesloten?  
Kein Ton aus den Lautsprechern.  
Pas de son des enceintes.  
* Le fil de sortie d’enceinte est-il court-circuité?  
*
Ist die Lautsprecherausgangsleitung  
Sound is distorted.  
Het geluid wordt vervormd.  
kurzgeschlossen?  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers  
grounded in common?  
Le son est déformé.  
* Is de uitgaande speakerdraad geaard?  
* Zijn de “–” polen van de linker- en de  
rechterspeakers gemeenschappelijk geaard?  
Ton verzerrt.  
* Le fil de sortie d’enceinte est-il à la masse?  
* Les bornes “–” des enceintes gauche et droit  
sont-elles mises ensemble à la masse?  
* Ist die Lautsprecherausgangsleitung geerdet?  
* Sind die (–) Anschlußklemmen der linken und  
rechten Lautsprecher zusammen geerdet?  
Noise interfere with sounds.  
* Is the rear ground terminal connected to the  
car’s chassis using shorter and thicker cords?  
Geluid wordt door ruis gestoord.  
* Is de aarde-aansluiting achter met gebruik van  
kortere en dikkere snoeren met het chassis van de  
auto verbonden?  
Interférence avec les sons  
Störgeräusche im Klang.  
* La prise arrière de mise à la terre est-elle  
connectée au châssis de la voiture avec un  
cordon court et épais?  
* Ist die hintere Erdungsklemme mit kürzeren  
und dickeren Kabeln an das Fahrzeugchassis  
angeschlossen?  
Unit becomes hot.  
* Is the speaker output lead grounded?  
* Are the “–” terminals of L and R speakers  
grounded in common?  
Het apparaat raakt verhit.  
Lappareil devient chaud.  
* Is de uitgaande speakerdraad geaard?  
* Zijn de “–” polen van de linker- en de  
rechterspeakers gemeenschappelijk geaard?  
Gerät wird heiß.  
* Le fil de sortie d’enceinte est-il à la masse?  
* Les bornes “–” des enceintes gauche et droit  
sont-elles mises ensemble à la masse?  
* Ist die Lautsprecherausgangsleitung geerdet?  
* Sind die (–) Anschlußklemmen der linken und  
rechten Lautsprecher zusammen geerdet?  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
DEUTSCH  
FRANÇAIS  
NEDERLANDS  
Typical Connections / Typische Anschlüsse / Raccordements typiques / Normale verbindingen  
A
Before connecting: Check the wiring in the  
vehicle carefully. Incorrect connection may  
cause serious damage to this unit.  
The leads of the power cord and those of the  
connector from the car body may be different in Die Leiter des Stromkabels und die Leiter des  
Vor dem Anschließen: Die Verdrahtung im  
Fahrzeug sorgfältig überprüfen. Falsche  
Anschlüsse können ernsthafte Schäden am  
Gerät hervorrufen.  
Avant de commencer la connexion: Vérifiez  
attentivement le câblage du véhicule. Une  
connexion incorrecte peut endommager  
sérieusement l’appareil.  
Le fil du cordon d’alimentation et ceux des  
connecteurs du châssis de la voiture peuvent  
être différents en couleur.  
Alvorens de verbindingen tot stand te  
brengen: Moet u de bedrading in de auto  
zorgvuldig. Het apparaat kan door verkeerde  
verbindingen ernstige schade oplopen.  
De draden van het stroomsnoer verschillen mogelijk  
van kleur metde aansluitingen op het chassis van de  
auto.  
color.  
Anschlusses im Fahrzeug können sich farblich  
unterscheiden.  
1 Connect the colored leads of the power cord  
in the order specified in the illustration  
below.  
1 Die farbigen Adern des Stromkabels in der  
Reihenfolge anschließen, wie in der  
Abbildung unten gezeigt.  
1 Connectez les fils colorés du cordon  
d’alimentation dans l’ordre spécifié sur  
l’illustration ci-dessous.  
1 Verbind de gekleurde draden van het  
stroomsnoer in de afbeelding hieronder  
aangegeven volgorde.  
2 Connect the aerial cord.  
2 Das Antennenkabel anschließen.  
3 Die Kabelbäume am Gerät anschließen.  
Hinweis: Verfügt Ihr Fahrzeug nicht über eine  
Zubehöranschlußklemme, die Sicherung von  
2 Connectez le cordon d’antenne.  
2 Sluit de antenne aan.  
3 Finally connect the wiring harness to the unit.  
Note: If your vehicle does not have any  
3 Finalement, connectez le faisceau de fils à  
3 Verbind de draadbundel daarna met het apparaat.  
accessory terminal, move the fuse from the  
fuse position 1 (initial position) to fuse position  
l’appareil.  
Opmerking: Als uw voertuig niet beschikt over  
Remarque: Si votre véhicule ne possède pas de een aansluitklem, moet u de zekering verplaatsen  
2, and connect the red lead (A7) to the positive der 1. Sicherungsposition (Erstposition) in die 2. borne accessoire, déplacez le fusible de la  
van stand 1 (beginstand) naar stand 2 en moet u de  
rode draad (A7) met de pluspool (+) van de accu  
verbinden.  
(+) battery terminal.  
Sicherungsposition versetzen, die rote Leitung  
position de fusible 1 (position originale) à la  
position de fusible 2 et connectez le fil rouge  
(A7) à la borne positive (+) de la batterie.  
Le fil jaune (A4) n’est pas utilisé dans ce cas.  
• The yellow lead (A4) is not used in this case. (A7) an der (+) Batterieanschlußklemme  
In dit geval wordt de gele draad (A4) niet gebruikt.  
anschließen.  
Die gelbe Leitung (A4) wird in diesem Fall  
nicht verwendet.  
To steering wheel remote controller (see diagram  
An Lenkradfernbedienung (siehe Schaltplan  
Pour la télécommande de volant (voir le diagramme  
)
Line out (see diagram  
Schutz kappen Signalausgang  
)
)
B1 B3 B5 B7  
)
(siehe Schaltplan  
Sortie de ligne  
)
Fuse position 2 / 2. Sicherungsposition / Position de fusible 2 / Zekering, stand 2  
B2 B4 B6 B8  
A5 A7  
Naar stuurwiel-afstandsbediening (zie schema  
)
(voir le diagramme  
Uitgang (zie schema  
)
)
Fuse position 1 / 1. Sicherungsposition /Position de fusible 1 / Zekering, stand 1  
A2 A4  
A8  
15 A fuse  
Rear ground terminal  
Hintere Erdungscan–  
schlußklemme  
15 A Sicherung  
Fusible 15 A  
Zekering 15 A  
B1 B3 B5 B7  
B2 B4 B6 B8  
1
A5 A7  
Borne arrière de masse  
A2 A4  
A8  
Massaklem aan de achterkant  
1
*
*
*
*
Not included for this unit  
1
1
1
Wird nicht mit Gerät mitgeliefert  
Non fourni avec cet appareil  
Niet bij het apparaat inbegrepen  
Ignition switch  
Zündschalter  
Interrupteur d’allumage  
Ontstekingsschakelaar  
Black  
Schwarz  
Noir  
1
To metallic body or chassis of the car  
*
A8  
Zwart  
Zur metallenen Karosserie oder zum Fahrwerk des Autos  
Vers corps métallique ou châssis de la voiture  
Naar metalen ondergrond of chassis van de auto  
Aerial terminal  
1
*
1
Antennenanschlußklemme  
Borne de l’antenne  
Aansluitpunt antenne  
3
2
To a live terminal in the fuse block connecting to the car battery  
(bypassing the ignition switch) (constant 12 V)  
Zur einer stromführenden Anschlußklemme im Sicherungsblock zum  
Anschließen an die Autobatterie (Umgehen des Zündschalters)  
(konstant 12 V)  
Yellow*2  
Gelb*2  
Jaune *2  
Geel *2  
A4  
2
À une borne sous tension du porte-fusible connectée à la batterie de  
la voiture (en dérivant l’interrupteur d’allumage) (12 V constant)  
Naar een onder spanning staande aansluitklem in het zekeringblok die is  
aangesloten op de accu van de auto (u passeert de ontstekingsschakelaar)  
(constant 12 V)  
Fuse block  
Sicherungsblock  
Porte-fusible  
Zekeringblok  
Red  
Rot  
Rouge  
Rood  
To an accessory terminal in the fuse block  
Zur einer Zubehöranschlußklemme im Sicherungsblock  
Vers borne accessoire du porte-fusible  
Naar een aansluitklem in het zekeringblok  
A7  
3
2
*
Before checking the operation of this unit prior to  
installation, this lead must be connected, otherwise power  
cannot be turned on.  
Vor der Überprüfung der Funktionsfähigkeit des Geräts  
vor dem Einbau, muß diese Leitung angeschlossen  
werden, da sonst die Stromversorgung nicht  
eingeschaltet werden kann.  
Pour vérifier le fonctionnement de cet appareil avant  
installation, ce fil doit être raccordé, sinon l’appareil ne  
peut pas être mis sous tension.  
Blue with white stripe  
Blau mit weißem Streifen  
Bleu avec bande blanche  
Blauw met witte streep  
2
*
To the remote lead of other equipment or power aerial if any (200 mA max.)  
Zum Zusatzkabel des anderen Geräts oder der Motorantenne, sofern vorhanden  
(max. 200 mA)  
Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une  
(200 mA max.)  
A5  
4
2
2
*
Naar afstandsdraad van andere apparatuur of antenne met circuit indien aanwezig (200 mA max.)  
*
Voordat u controleert of het apparaat werkt (alvorens het te  
D
installeren), moet deze draad aangesloten zijn. Als dit niet het  
geval is, kan de stroom niet worden ingeschakeld.  
Brown  
Braun  
Marron  
Bruin  
To cellular phone system  
Zur Mobiltelefon  
A2  
5
À un système de téléphone cellulaire  
Naar het mobiele-telefoonsysteem  
6
B6  
B5  
B4  
B3  
B2  
B1  
B8  
B7  
White with black stripe  
Weiß mit schwarzem  
Streifen  
Blanc avec bande noire  
Wit met zwarte streep  
White  
Weiß  
Blanc  
Wit  
Gray with black stripe  
Grau mit schwarzem  
Streifen  
Gris avec bande noire  
Grijs met zwarte streep  
Gray  
Grau  
Gris  
Green with black stripe  
Grün mit schwarzem  
Streifen  
Vert avec bande noire  
Groen met zwarte streep  
Green  
Grün  
Vert  
Purple with black stripe  
Lila mit schwarzem  
Streifen  
Violet avec bande noire  
Paars met zwarte streep  
Purple  
Lila  
Violet  
Paars  
Grijs  
Groen  
Left speaker (front)  
Right speaker (front)  
Left speaker (rear)  
Right speaker (rear)  
Linker Lautsprecher (vorne)  
Enceinte gauche (avant)  
Linkerspeaker (voorin)  
Rechter Lautsprecher (vorne)  
Enceinte droit (avant)  
Rechterspeaker (voorin)  
Linker Lautsprecher (hinten)  
Enceinte gauche (arrière)  
Linkerspeaker (achterin)  
Rechter Lautsprecher (hinten)  
Enceinte droit (arrière)  
Rechterspeaker (achterin)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections Adding Other Equipment / Anschlüsse zum Hinzufügen von anderer Ausrüstung / Raccordement pour ajouter d’autres appareils /  
Aansluitingen voor het toevoegen van andere apparatuur  
B
Amplifier / Verstärker / Amplificateur / Versterker  
You can connect an amplifier and other  
equipment to upgrade your car stereo system.  
• Connect the remote lead (blue with white  
stripe) to the remote lead of the other  
equipment so that it can be controlled  
through this unit.  
Sie können einen Verstärker oder ein anderes  
Gerät anschließen, um Ihre Autostereoanlage  
zu erweitern.  
Schließen Sie das Fernbedienungskabel (blau Connectez le fil de commande à distance  
mit weißem Streifen) an das  
Fernbedienungskabel des anderen Geräts an,  
so daß es über dieses Gerät gesteuert  
werden kann.  
Vous pouvez connecter un amplificateur ou  
autre appareil pour améliorer votre système  
autoradio.  
Het is mogelijk om uw autostereosysteem uit te  
breiden met een versterker of andere apparatuur.  
Verbind de externe kabel (blauw met witte streep)  
met de externe kabel van het andere apparatuur  
zodat deze op afstand vanaf deze apparaat kan  
worden bediend.  
(bleu avec bande blanche) au fil de commande  
à distance de lautre appareil de façon quil  
puisse être commandé via cet appareil.  
Pour l’amplificateur seulement:  
Déconnectez les enceintes de cet appareil  
et connectez-les à l’amplificateur. Laissez  
les fils d’enceintes de cet appareil  
inutilisés.  
Alleen voor een versterker:  
For amplifier only:  
Koppel de speakers van dit apparaat los  
en verbind ze aan de versterker. Gebruik  
de speakerdraden van dit apparaat niet.  
Disconnect the speakers from this unit,  
connect them to the amplifier. Leave the  
speaker leads of this unit unused.  
Nur für den Verstärker:  
Die Lautsprecher von diesem Gerät  
abtrennen und am Verstärker anschließen.  
Die Lautsprecherleitungen dieses Geräts  
unbenutzt lassen.  
Rear speakers  
Hintere Lautsprecher  
Enceintes arrière  
Achterspeakers  
Remote lead  
Y-connector (not supplied with this unit)  
Y-Anschluß (nicht mit diesem Gerät mitgeliefert)  
Connecteur Y (non fourni avec cet appareil)  
Fernbedienungsleitung  
Fil dalimentation à distance  
Afstandbedieningsdraad  
Y-connector (wordt niet bij dit apparaat geleverd)  
INPUT  
JVC Amplifier  
JVC Verstärker  
L
L
JVC Amplificateur  
JVC Versterker  
R
R
Remote lead (Blue with white stripe)  
Fernbedienungsleitung (Blau mit weißem Streifen)  
Fil dalimentation à distance (Bleu avec bande blanche)  
Afstandbedieningsdraad (Blauw met witte streep)  
3
*
To the remote lead of other equipment or power aerial if any  
Zum Zusatzkabel des anderen Geräts oder der Motorantenne,  
sofern vorhanden  
OUT  
LINE  
Au fil de télécommande de lautre appareil ou à lantenne  
automatique sil y en a une  
Naar afstandsdraad van andere apparatuur of antenne met circuit  
indien aanwezig  
L
L
KD-G401  
R
R
FRONT  
REAR  
Front speakers  
Vordere Lautsprecher  
Enceintes avant  
Voorspeakers  
Signal cord (not supplied with this unit)  
Einzelleitung (nicht mit diesem Gerät mitgeliefert)  
Cordon de signal (non fourni avec cet appareil)  
Signaalkabel (wordt niet bij dit apparaat geleverd)  
3
*3 Firmly attach the ground wire to the  
metallic body or to the chassis of the car—  
to the place not coated with paint (if coated  
with paint, remove the paint before  
attaching the wire). Failure to do so may  
cause damage to the unit.  
*3 Verbinden Sie den Erdungsleiter mit der  
Karosserie oder dem Rahmen des  
*3 Attachez solidement le fil de mise à la masse  
au châssis métallique de la voiture—à un  
*
Bevestig de aardedraad goed met een metalen  
onderdeel of het chassis van de auto—bevestig  
op een niet-gelakt gedeelte (indien gelakt,  
schuur dan af alvorens de draad te bevestigen).  
Het toestel kan worden beschadigd indien de  
aardedraad niet goed is aangesloten.  
Fahrzeugs. Die Kontaktstelle darf nicht  
lackiert sein (sollte die Kontaktstelle lackiert  
sein, entfernen Sie den Lack der  
endroit qui nest pas recouvert de peinture  
(sil est recouvert de peinture, enlevez  
dabord la peinture avant dattacher le fil).  
Lappareil peut être endommagé si cela nest  
pas fait correctement.  
Kontaktstelle, bevor Sie den Leiter  
befestigen). Wenn der Erdungsleiter nicht  
ordnungsgemäß angeschlossen wird, kann  
dieses Gerät beschädigt werden.  
Connecting to the steering wheel remote controller / Anschluß an die Lenkradfernbedienung / Connexion de la télécommande de volant /  
Verbinden met de stuurwiel-afstandsbediening  
C
If your car is equipped with the steering wheel remote controller, you can operate this receiver using the  
controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required.  
Consult your JVC IN-CAR ENTERTAINMENT dealer for details.  
Wenn Ihr Fahrzeug mit einer Lenkradferndienung ausgestattet ist, können Sie damit diesen Receiver  
steuern. Hierfür ist ein für Ihr Fahrzeug passender Radio-Lenkrad-Fernbedienungsadaption von JVC (nicht  
im Lieferumfang enthalten) erforderlich. Für weitere Einzelheiten wenden Sie sich an Ihren JVC  
Autoradiohändler.  
OE remote adapter (not supplied)  
Radio-Lenkrad-Fernbedienungsadaption  
(nicht im Lieferumfang enthalten)  
Steering wheel remote input  
Eingang für Lenkradfernbedienung  
Entrée de la télécommande de volant Adaptateur pour télécommande au volant (non fourni)  
Ingang stuurwiel-afstandsbediening  
Adapter voor stuurwiel-afstandsbediening (niet bijgeleverd)  
Si votre voiture est munie dune télécommande de volant, vous pouvez commander cet autoradio en utilisant  
la télécommande. Pour le faire, un adaptateur pour télécommande au volant JVC (non fourni) correspondant  
à votre voiture est nécessaire. Consultez votre revendeur dautoradio JVC pour les détails.  
Indien uw auto een stuurwiel-afstandsbediening heeft, kunt u deze receiver met die afstandsbediening bedienen.  
Hiervoor heeft u echter een JVC adapter (niet bijgeleverd) nodig die geschikt is voor de stuurwiel-afstandsbediening van  
uw auto. Raadpleeg uw JVC car audio dealer voor details.  
KD-G401  
Steering wheel remote controller (equipped in the car)  
Lenkradfernbedienung (im Fahrzeug installiert)  
Télécommande de volant (installée dans la voiture)  
Stuurwiel-afstandsbediening (in de auto)  
PRECAUTIONS on power supply  
and speaker connections:  
VORSICHTSMASSREGELN beim  
Anschließen der Stromversorgung  
und Lautsprecher:  
Die Lautsprecherleitungen des Netzkabels  
NICHT an der Autobatterie anschließen, da  
sonst das Gerät schwer beschädigt wird.  
VOR dem Anschließen der  
PRECAUTIONS sur l’alimentation et  
la connexion des enceintes:  
NE CONNECTEZ PAS les fils denceintes  
du cordon dalimentation à la batterie;  
sinon, lappareil serait sérieusement  
endommagé.  
AVANT de connecter les fils denceintes du  
cordon dalimentation aux enceintes, vérifiez  
le câblage des enceintes de votre voiture.  
VOORZORGSMAATREGELEN bij het  
verbinden van de stroomkabeldraad  
met de speakers:  
DO NOT connect the speaker leads of the  
power cord to the car battery; otherwise,  
the unit will be seriously damaged.  
• BEFORE connecting the speaker leads of the  
power cord to the speakers, check the  
speaker wiring in your car.  
Verbind de speakerdraden van de  
stroomkabel NIET met de accu van de  
auto; als u dit wel doet, zal het apparaat  
ernstige schade oplopen.  
VOORDAT u de speakerdraden van de  
stroomkabel met de speakers verbindt, moet u de  
bedrading van de speakers in uw auto controleren.  
Lautsprecherleitungen des  
Spannunsgversorgungskabels an die  
Lautsprecher, die Lautsprecherverdrahtung in  
Ihrem Auto überprüfen.  
+
+
+
+
-
+
-
+
-
L
L
L
-
-
-
+
+
+
+
-
+
-
+
-
R
R
R
-
-
-
4
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer SIXL 149 D User Manual
Insignia Flat Panel Television NS LCD37 User Manual
Intec Vacuum Cleaner 8940 20 User Manual
JL Audio Speaker 8W1v2 4 User Manual
Jonsered Brush Cutter GR50 User Manual
Kenmore Range 7907745 User Manual
Kenwood Home Theater System KS 708HT User Manual
Kenwood Marine Radio TS 940S User Manual
KitchenAid Dishwasher KIDS36 User Manual
Klipsch Speaker RF 10 User Manual