CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-FX473R/KS-FX470R
KS-F363R/KS-F360R
KS-FX473R
KS-FX470R
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
KS-F363R
KS-F360R
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
GET0054-001A
[E/EX]
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF THE BUTTONS
Control panel — KS-FX473R/KS-FX470R
Display window
;
g
a s
i
o
d
f
h
1
4
6
7
8 9 p
2 3
5
q
w
e
r t y
u
1
(standby/on/attenuator) button
Display window
i RND (random) indicator
o Main display
; FM band number indicators
FM1, FM2, FM3
a AM indicator
s CD-CH (CD changer) indicator
d MO (monaural) indicator
ST (stereo) indicator
2 +/– buttons
3 DISP (display) button
4 0 (eject) button
5 MO/RND (monaural/random) button
6 Cassette compartment
7 1/¡ (PROG:program) buttons
8 FM button
9 AM button
p CD-CH (CD changer) button
q SEL (select) button
f RDS indicators
AF, EON, REG, PTY, TP
g Sound mode indicators
BEAT, POP, SOFT
w 4
/
¢ buttons
• Also function as SSM buttons when pressed
together.
h LOUD indicator
e Number buttons
r TP (traffic programme) button
RDS (radio data system) button
t PTY (programme type) button
y SOUND button
u
(control panel release) button
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF THE BUTTONS
Control panel — KS-F363R/KS-F360R
Display window
i
;
d
a
o
s
f
1
4
6
7
8 9 p
2 3
5
q
w
e
r t y
u
1
(standby/on/attenuator) button
Display window
i MO (monaural) indicator
ST (stereo) indicator
o Main Display
; FM band number indicators
FM1, FM2, FM3
a AM indicator
2 +/– buttons
3 DISP (display) button
4 0 (eject) button
5 MO (monaural) button
6 Cassette compartment
7 1/¡ (PROG:program) buttons
8 FM button
9 AM button
p TP (traffic programme) button
q SEL (select) button
s RDS indicators
AF, EON, REG, PTY, TP
d Sound mode indicators
BEAT, POP, SOFT
w
/
buttons
f LOUD indicator
•
Also function as SSM buttons when pressed
together.
e Number buttons
r RDS (radio data system) button
t PTY (programme type) button
y SOUND button
u
(control panel release) button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
KS-FX473R/KS-FX470R
KS-F363R/KS-F360R
2
3
1
2
Turning on the power
3 Adjust the volume.
To increase the volume.
1 Turn on the power.
To decrease the volume.
Notes on One-Touch Operation:
• When you select a source in step 2 below, the power
automatically comes on. You do not have to press
this button to turn on the power.
• If the cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off the
power or ignition key. It may damage the tape head
and the cassette.
Volume level appears.
4 Adjust the sound as you want.
(See pages 16 – 17.)
2 Select the source.
To drop the volume in a moment
Press
briefly while listening to any
source. “ATT” starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
until “SEE YOU”
appears on the display.
To operate the tuner (FM or AM),
see pages 6 – 14.
To operate the tape,
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 18.
see page 15.
To operate the CD changer
(Only for KS-FX473R/KS-FX470R),
see pages 22 – 23.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO BASIC OPERATIONS
Only for KS-F363R/
KS-F360R
2 Start searching a station.
Listening to the radio
To search stations of lower frequencies.
You can use either automatic searching or
manual searching to tune into a particular station.
Note:
When a cassette is in the cassette compartment, you
cannot select the tuner. Be sure to eject the cassette
from the cassette compartment to listen to the radio.
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
To search stations of higher frequencies.
When a station is received, searching stops.
Searching a station automatically:
Auto search
1 Select the band (FM1 – 3, AM).
To stop searching before a station is received,
press the same button you have pressed for
searching.
FM1
FM3
FM2
Searching a station manually:
Manual search
AM
Selected band appears.
1 Select the band (FM1 – 3, AM).
FM1
FM3
FM2
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator goes
off).
2 Press and hold 4
/
¢ (for
KS-FX473R/KS-FX470R) or
/
(for KS-F363R/KS-F360R) until “M
(manual)” starts flashing on the
display.
To restore the stereo effect, press the same
button again.
Storing stations in memory
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
3 Tune into a station you want while “M”
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
is flashing.
To tune into stations of lower frequencies.
1 Select the FM band (FM1 – 3) you want
to store FM stations into.
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
FM1
FM3
FM2
To tune into stations of higher frequencies.
2 Press and hold both buttons for more
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM – MW/LW) until
you release the button.
than 2 seconds.
When an FM stereo broadcast is hard to
receive:
Press MO/RND (for KS-FX473R/KS-FX470R) or
MO (for KS-F363R/KS-F360R) while listening to
an FM stereo broadcast.
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
• Each time you press the button, the MO
indicator lights up and goes off alternately.
“SSM” appears, then disappears when automatic
preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons —
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned into.
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
Lights up when receiving an FM broadcast in stereo.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Manual preset
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset the
stations again.
You can preset up to 6 stations in each band (FM1,
FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the
preset number 1 of the FM1 band
1 Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If
you have not stored them yet, see “Storing
stations in memory” on page 7.
FM1
FM3
FM2
1 Select the band (FM1 – 3, AM).
2 Tune into a station (in this example,
of 88.3 MHz).
FM1
FM3
FM2
To tune into stations of lower frequencies.
AM
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
2 Select the number (1 – 6) for the
preset station you want.
To tune into stations of higher frequencies.
3 Press and hold the number button
(in this example, 1) for more than 2
seconds.
“P1” flashes for a few seconds.
4 Repeat the above procedure to store
other stations into other preset
numbers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS OPERATIONS
Using Network-Tracking Reception
For KS-FX473R/KS-FX470R:
What you can do with RDS
RDS (Radio Data System) allows FM stations to
send an additional signal along with their regular
programme signals.For example, the stations send
their station names, as well as information about
what type of programme they broadcast, such as
sports or music, etc.
Press and hold TP RDS (Traffic Programme/
Radio Data System) for more than 1 second.
Each time you press and hold the button,
Network-Tracking Reception modes change as
follows:
Another advantage of RDS function is called
“Enhanced Other Networks.” The EON indicator
lights up while receiving an FM station with the
Enhanced Other Networks data. By using these
data sent from a station, you can tune into a different
station of a different network broadcasting your
favorite programme or traffic announcement while
listening to another programme or to another source
such as tape.
Mode 1
Mode 2
Mode 3
For KS-F363R/KS-F360R:
Press RDS (Radio Data System).
Each time you press the button, Network-
Tracking Reception change as follows:
By receiving the RDS data, this unit can do the
following:
Mode 1
Mode 2
Mode 3
• Tracing the same programme automatically
(Network-Tracking Reception)
AF indicator
• Standby Reception of TA (Traffic
Announcement) or your favorite programme
• PTY (Programme Type) search
• And some other functions
REG indicator
Mode 1
Tracing the same programme
automatically (Network-Tracking
Reception)
The AF indicator lights up but the REG indicator
does not.
Network-Tracking Reception is activated with
Regionalization set to “off.”
When driving in an area where FM reception is not
good, the tuner built in this unit automatically tunes
into another RDS station, broadcasting the same
programme with stronger signals. So, you can
continue to listen to the same programme in its
finest reception, no matter where you drive. (See
the illustration on the next page.)
Switches to another station within the same
network when the receiving signals from the
current station become weak.
• In this mode, the programme may differ from the one
currently received.
Mode 2
Two types of the RDS data are used to make
Network-Tracking Reception work correctly — PI
(Programme Identification) and AF (Alternative
Frequency).
Without receiving these data correctly from the RDS
station you are listening to, Network-Tracking
Reception will not operate.
Both the AF indicator and the REG indicator light
up.
Network-Tracking Reception is activated with
Regionalization set to “on.”
Switches to another station, within the same
network, broadcasting the same programme
when the receiving signals from the current
station become weak.
Mode 3
Neither the AF indicator nor the REG indicator
lights up.
Network-Tracking Reception is deactivated.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
7 If you are listening to a cassette (or CD
changer: only for KS-FX473R/KS-FX470R) and
wish to listen to a TP station, eject the cassette
and press TP RDS or TP to enter the TA
standby mode. (The TP indicator lights up.)
The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency E
If a traffic programme starts broadcasting while the
TA standby mode is active, “TRAFFIC” appears and
the playback source changes to the FM band.The
volume increases to the presetTA volume level (see
page 13) and the traffic programme can be heard.
Programme 1
broadcasting
on frequency B
To deactivate the TA standby mode, press TP
RDS or TP.
Programme 1
broadcasting
on frequency C
Programme 1
broadcasting
on frequency D
PTY Standby Reception
When you press PTY while listening to
an FM station, the PTY indicator is lit
during reception of a PTY station and
the PTY standby mode is engaged.The
selected PTY name stored on page 11
flashes for 5 seconds.
Using Standby Reception
Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) and Traffic Announcement (TA)
from the current source (another FM station, tape,
or CD changer (only for KS-FX473R/KS-FX470R).
• When the station being received is not a PTY station,
the PTY indicator flashes. Press 4
(for KS-FX473R/KS-FX470R) or
/
¢
(for KS-
/
• Standby Reception will not work if you are listening
to an AM station.
F363R/KS-F360R) to engage the PTY standby mode.
“SEARCH” appears on the display, and PTY station
search starts. When a PTY station is tuned into, the
PTY indicator is lit.
TA Standby Reception
When you press TP RDS (for KS-
FX473R/KS-FX470R) or TP (for
KS-F363R/KS-F360R) while
7 If you are listening to a cassette (or CD
changer: only for KS-FX473R/KS-FX470R) and
wish to listen to a selected PTY broadcast,
eject the cassette and press PTY to enter the
PTY standby mode. (The PTY indicator lights
up.)
listening to an FM station, the TP
KS-FX473R
indicator is lit during reception of
KS-FX470R
a TP (Traffic Programme) station
and the TA standby mode is
engaged.
If the selected PTY programme starts broadcasting
while the PTY standby mode is active, the selected
PTY name appears and the playback source
changes to the FM band. The selected PTY
programme can then be heard.
KS-F363R
KS-F360R
• When the station being received is not a TP station,
the TP indicator flashes. Press 4
/
¢ (for
KS-FX473R/KS-FX470R) or
/
(for KS-F363R/
To deactivate the PTY standby mode, press PTY
KS-F360R) to engage the TA standby mode.
“SEARCH” appears on the display, and TP station
search starts. When a TP station is tuned into, the TP
indicator is lit.
again.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching your favorite programme
You can search one of your 6 favorite programme
types stored in memory.
When shipped from the factory, the following 6
programme types have been stored in the
number buttons (1 to 6).
To store your favorite programme types, see
below.
Selecting your favorite programme for
PTY Standby Reception
You can select your favorite programme for PTY
Standby Reception to store in memory.
When shipped from the factory, “NEWS” is stored
as the programme type for PTY Standby Reception.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 20.)
To search your favorite programme type, see
page 12.
3
1
2
POP M
ROCK M
EASY M
6
4
5
CLASSICS
AFFAIRS
VARIED
To store your favorite programme types
2 Select “PTY STBY (standby)” if not
1 Press and hold SEL (select) for
more than 2 seconds so that one of
the PSM items appears on the
display. (PSM: see page 20.)
shown on the display.
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
3 Select one of twenty-nine PTY codes.
(See page 14.)
2 Select “PTY SRCH (search)” if not
Selected code name
appears on the display
shown on the display.
and is stored into memory.
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
4 Press SEL (select) to finish the setting.
3 Select one of twenty-nine PTY codes.
(See page 14.)
Selected code name
appears on the display.
• If the code already stored
in memory is selected, it
will flash on the display.
CONTINUED ON THE NEXT PAGE
11
Download from Www.Somanuals.com. All Manuals Search And Download.
To search your favorite programme type
4 Press and hold the number button for
more than 2 seconds to store the PTY
code selected into the preset number
you want.
1 Press and hold PTY (programme type)
for more than 1 second while listening
to an FM station.
The selected code name will flash on the
display.
The last selected PTY code appears.
5 Press SEL (select) to finish the setting.
2 Select one of the PTY codes stored in
the preset number buttons (1 to 6).
Ex.: When “ROCK M” is stored in preset number
button 2
PTY search for your favorite programme
starts after 5 seconds.
• If there is a station broadcasting a programme
of the same PTY code you selected, that
station is tuned into.
• If there is no station broadcasting a programme
of the same PTY code you selected, the station
will not change.
Note:
In some areas, the PTY search will not work correctly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the TA volume level
Other convenient RDS functions
and adjustments
You can preset the volume level for TA Standby
Reception. When a traffic programme is received,
the volume level automatically changes to the
preset level.
• See also “Changing the general settings
(PSM)” on page 19.
Changing the display mode while
listening to an FM station
You can change the initial indication on the
display to station name (PS NAME), station
frequency (FREQ) or clock time (CLOCK), while
listening to an FM RDS station.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
• See also “Changing the general settings
(PSM)” on page 19.
2 Press 4
FX470R) or
/
¢ (for KS-FX473R/KS-
(for KS-F363R/KS-F360R)
/
to select “TA VOL.”
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
3 Press + or – to set to the desired volume.
You can set it from “VOL 00” to “VOL 50.”
4 Press SEL (select) to finish the setting.
2 Press 4
/
¢ (for KS-FX473R/KS-
(for KS-F363R/KS-F360R)
FX470R) or
/
to select “DISPMODE” (display mode).
3 Press + or – to set to the desired indication
(“PS NAME,” “FREQ” or “CLOCK”).
Automatic clock adjustment
When shipped from the factory, the clock built in
this unit is set to be readjusted automatically
using the CT (Clock Time) data in the RDS signal.
If you do not want to use automatic clock
adjustment, follow the procedure below.
• See also “Changing the general settings
(PSM)” on page 19.
4 Press SEL (select) to finish the setting.
Note:
By pressing DISP, you can also change the display
while listening to an FM RDS station.
Each time you press the button, the following
information appears on the display:
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
Station name
(PS NAME)
2 Press 4
/
¢ (for KS-FX473R/KS-
(for KS-F363R/KS-F360R)
FX470R) or
/
to select “AUTO ADJ (adjustment).”
3 Press – to select “ADJ OFF.”
Now automatic clock adjustment is canceled.
4 Press SEL (select) to finish the setting.
Station frequency
(FREQ)
Programme type
(PTY)
To reactivate clock adjustment, repeat the
same procedure and select “ADJ ON” in step 3
by pressing +.
Clock time
(CLOCK)
Note:
It takes about 2 minutes to adjust the time using the
CT data. So, you should not change the station for
more than 2 minutes continuously; otherwise, the
clock time will not be adjusted.
• Then, the display goes back to the original
indication in several seconds.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PTY codes
NEWS:
News
SOCIAL:
Programmes on social activities
AFFAIRS:
Topical programmes expanding
on current news or affairs
Programmes which impart advice
on a wide variety of topics
Sport events
RELIGION: Programmes dealing with any
aspect of belief or faith, or the
nature of existence or ethics
PHONE IN: Programmes where people can
express their views either by
INFO:
SPORT:
EDUCATE: Educational programmes
DRAMA: Radio plays
CULTURE: Programmes on national or
regional culture
phone or in a public forum
TRAVEL:
LEISURE:
JAZZ:
Programmes about travel
destinations, package tours, and
travel ideas and opportunities
Programmes concerned with
recreational activities such as
gardening, cooking, fishing, etc.
Jazz music
SCIENCE:
Programmes on natural science
and technology
VARIED:
Other programmes like comedies
or ceremonies
POP M:
Pop music
Rock music
Easy-listening music
Light music
COUNTRY: Country music
NATION M: Current popular music from
another nation or region, in that
country’s language
ROCK M:
EASY M:
LIGHT M:
CLASSICS: Classical music
OTHER M: Other music
WEATHER: Weather information
FINANCE: Reports on commerce, trading,
the Stock Market, etc.
OLDIES:
FOLK M:
Classic pop music
Folk music
DOCUMENT: Programmes dealing with factual
matters, presented in an
investigative style
CHILDREN: Entertainment programmes for
children
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TAPE OPERATIONS
To stop play and eject the cassette
Press 0.
Listening to a cassette
You can playback type 1 (normal) tapes.
1 Turn on the power.
Tape play stops and the cassette automatically
ejects from the cassette compartment. The
source changes to the previously selected one.
• You cannot change the source if the cassette is
still in the cassette compartment.
To change source, you must eject the cassette
first.
• You can also eject the cassette by pressing 0
while the unit is turned off.
Note on One-Touch Operation:
If a cassette is already in the cassette
compartment, tape play starts automatically.
However, it is not recommended to leave the
cassette in the compartment when turning off
the power or ignition key. It may damage the
tape head and the cassette.
To fast-wind a tape
2 Insert a cassette into the cassette
compartment.
Press in ¡ or 1.
The tape will be wound in the direction of the
arrows (¡ or 1).
When one side of the tape
reaches its end during play,
the other side of the tape
automatically starts playing.
(Auto Reverse)
Tape direction
3 Select the tape direction.
Press both buttons at the
same time.
Each time you press both
buttons, the tape direction
changes alternately —
To restart playback, lightly press the other
button which is not pressed in (1 or ¡).
forward (
reverse (
) and
).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SOUND ADJUSTMENTS
Selecting preset sound modes
Adjusting the sound
You can select a preset sound adjustment
suitable to the music genre.
You can adjust the sound characteristics to your
preference.
1 Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
Select the sound mode you want.
Each time you press the button, the
sound mode changes as follows:
SCM OFF
(BEAT)
BAS
TRE
FAD
(POP) (SOFT)
(bass)
(treble)
(fader)
VOL
LOUD
BAL
(volume)
(loudness)
(balance)
For example, when “POP” is selected.
Indication
To do:
Range
BAS
TRE
FAD*
BAL
Adjust the bass.
–6 (min.)
|
+6 (max.)
Indication
For:
Preset values
BAS
TRE
LOUD
Adjust the treble.
–6 (min.)
|
+6 (max.)
SCM OFF (Flat sound)
00
+2
00
ON
ON
BEAT
Rock or disco
music
00
Adjust the front
and rear speaker
balance.
R6 (Rear only)
|
F6 (Front only)
POP
Light music
+4
+1
+1
–3
OFF
OFF
SOFT
Quiet
background
music
Adjust the left
and right speaker
balance.
L6 (Left only)
|
R6 (Right only)
LOUD
Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level. (When the
loudness is on, the
LOUD indicator
lights up.)
Notes:
LOUD ON
• You can adjust each sound mode to your preference,
and store it in memory.
|
LOUD OFF
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on page 17.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
the right column. (Your adjustments will be
canceled if another source is selected.)
VOL
Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the fader
level to “00.”
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Adjust the level.
3 Adjust the bass or treble level or
turn the loudness function ON/OFF.
• See page 16 for details.
To increase the level.
To decrease the level.
4 Repeat steps 2 and 3 to adjust the
other items.
Note:
5 Press and hold SOUND until the
sound mode you have selected in
step 1 flashes on the display.
Your adjustment made for the
selected sound mode is stored in
memory.
Normally, the + and – buttons works as the volume
control. So you do not have to select “VOL” to adjust
the volume level.
Storing your own sound
adjustments
6 Repeat the same procedure to store
other sound modes.
You can adjust the sound modes (BEAT, POP,
SOFT) to your preference and store your own
adjustments in memory.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 16.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1 Call up the sound mode you want to
adjust.
• See the left column for
details.
2 Select “BAS” (bass), “TRE” (treble)
or “LOUD” (loudness).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER MAIN FUNCTIONS
4 Set the clock system.
Setting the clock
You can also set the clock system to either 24 hours
1 Select “24H/12H.”
or 12 hours.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
2 Select “24H” or “12H.”
2 Set the hour.
1 Select “CLOCK H” if not shown on the
display.
5 Press SEL (select) to finish the setting.
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
2 Adjust the hour.
To check the current clock time or change the
display mode
Press DISP (display) repeatedly.
Each time you press the button,
the display mode changes as
follows:
3 Set the minute.
1 Select “CLOCK M.”
• During tuner operation:
Frequency
Clock
Notes:
*
For the indication change during RDS operation,
see page 13.
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
• During tape operation:
2 Adjust the minute.
Play mode (tape direction)
Clock
• During CD changer operation:
(For KS-FX473R/KS-FX470R only.)
Disc number
Clock
Elapsed playing time
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the telephone muting – TEL
Changing the general settings
(PSM)
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either “MUTING 1” or “MUTING 2,”
whichever mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
• MUTING 1: Select this if this setting can mute
the sounds.
• MUTING 2: Select this if this setting can mute
the sounds.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 20.)
• OFF:
Cancels the telephone muting.
1 Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
2 Select the item you want to adjust.
(See page 20.)
2 Select “TEL.”
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
KS-FX473R
KS-FX470R
KS-F363R
KS-F360R
3 Select or adjust the item selected
above.
3 Select the desired setting —
“MUTING 1,” “MUTING 2.”
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
4 Press SEL (select) to finish the
setting.
5 Press SEL (select) to finish the setting.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferred Setting Mode (PSM) items
2
1
3
Set.
Factory-
preset
settings
See
page
KS-FX473R/KS-FX470R
KS-F363R/KS-F360R
Select.
+
–
Hold.
CLOCK H
CLOCK M
24H/ 12H
Hour adjustment
Minute adjustment
Back
Back
Advance
Advance
0:00
24H
18
18
13
24/12-hour time
display
24H
12H
AUTO ADJ
Automatic clock
setting
ADJ OFF
PS NAME
ADJ ON
FREQ
ADJ ON
DISPMODE
Display mode
13
PS NAME
DISC
CLOCK
20
10
10
CH DISP*
Changer display
TIME
DISC
NEWS
PTY STBY
PTY SRCH
TA VOL
PTY standby
PTY search
29 programme types
(see page 14.)
(See page 10.)
Traffic announcement
volume
VOL 00 – VOL 50
VOL 20
OFF
13
19
TEL
Telephone muting
OFF
MUTING 1
MUTING 2
*Only for KS-FX473R/KS-FX470R
Selecting the initial CD information display
You can select what type of the CD playback information to be initially shown on the display when you
start playing a CD. When shipped from the factory, the disc number and track number information
selected is shown.
• DISC:
• TIME:
Disc number appear on the display.
Elapsed playing time appears on the display.
1. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the
display.
2. Press 4
or
¢ to select “CH DISP (changer display).”
3. Press + or – to set to the desired indication (“TIME” or “DISC”).
4. Press SEL (select) to finish the setting.
To see other information while playing a CD, press DISP.
Each time you press the button, the information changes alternately.
Disc number
Clock
Elapsed playing time
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the control panel
Detaching the control panel
1 Insert the left side of the control panel
You can detach the contol panel when leaving
the car.
into the groove on the panel holder.
When detaching or attaching the control panel,
be careful not to damage the connectors on the
back of the control panel and on the panel holder.
Detaching the control panel
Before detaching the control panel, be sure to
turn off the power.
2 Press the right side of the control
panel to fix it to the panel holder.
1 Unlock the control panel.
2 Lift and pull the control panel out of
Note on cleaning the connectors:
If you frequently detach the control panel, the
the unit.
connectors will deteriorate.
To minimize this possibility, periodically wipe
the connectors with a cotton swab or cloth
moistened with alcohol, being careful not to
damage the connectors.
3 Put the detached control panel into
the provided case.
Connectors
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD CHANGER OPERATIONS
This section is only for KS-FX473R/KS-FX470R.
Playing CDs
We recommend that you use one of the CH-X
series with your unit.
If you have another CD automatic changer, consult
your JVC IN-CAR ENTERTAINMENT dealer for
connections.
Select the CD automatic changer (CD-CH).
Playback starts from the first track
of the first disc.
All tracks of all discs are played back.
• For example, if your CD automatic changer is one of
the KD-MK series, you need a cord (KS-U15K) for
connecting it to this unit.
Disc number
Before operating your CD automatic changer:
• Refer also to the Instructions supplied with
your CD changer.
Track number
• If no discs are in the magazine of the CD
changer or the discs are inserted upside
down, “NO CD” or “NO DISC” will appear on
the display. If this happens, remove the
magazine and set the discs correctly.
• If “RESET 1” – “RESET 8” appears on the
display, something is wrong with the
connection between this unit and the CD
changer.If this happens, check the connection
and make sure the cords are connected firmly.
Then, press the reset button of the CD
changer.
Note on One-Touch Operation:
When you press CD-CH, the power automatically turns
on. You do not have to press
power.
to turn on the
22
Download from Www.Somanuals.com. All Manuals Search And Download.
To fast-forward or reverse the track
To go to a particular disc directly
Press the number button corresponding to the disc
number to start its playback (while the CD changer
is playing).
Press and hold
¢,
while playing a CD, to fast-
forward the track.
Press and hold 4
while playing a CD, to
reverse the track.
,
To go to the next track or the previous tracks
• To select a disc number from 1 – 6:
Press 1 (7) – 6 (12) briefly.
Press
¢ briefly,
• To select a disc number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than 1
second.
while playing a CD, to go
ahead to the beginning
of the next track. Each
time you press the button
consecutively, the
Disc number
beginning of the next
track is located and
played back.
Track number
Ex. When disc number 3 is selected
Press 4
briefly,
while playing a CD, to go
back to the beginning of
the current track. Each
time you press the button
consecutively, the
beginning of the previous
tracks is located and
played back.
Playing at random
(Random Play)
Each time you press the button, CD
random play mode changes as
follows:
RND1
RND2
Canceled
RND
Mode
Plays at random
Indicator
RND1
(random1)
Lights
All tracks of the current
disc, then the tracks of
the next disc, and so on.
RND2
Flashes
All tracks of all discs
(random2)
inserted in the magazine.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
This unit requires very little attention, but you will
be able to extend the life of the unit if you follow
the instructions below.
To keep the tape clean
To clean the head
• Always store the cassettes to their storage
cases after use.
• Do not store cassettes in the following places:
– Subject to direct sunlight
– With high humidity
– At extremely hot temperatures
• Clean the head after every 10 hours of use
using a wet-type head cleaning tape (available
at an audio store).
CAUTION:
When the head becomes dirty, you may realize
the following symptoms:
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any
metallic or magnetic tools.
• Do not play the cassettes with peeling labels;
otherwise, they can damage the unit.
• Tighten tapes to remove slack since loose tape
may become entangled with the mechanism.
• Do not leave a cassette in the cassette
compartment after use, as the tape may become
slack.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
Causes
Remedies
• A cassette tape cannot be
inserted.
You have tried to insert a
cassette in the wrong way.
Insert the cassette with the
exposed tape facing right.
• Cassette tapes become hot.
This is not a malfunction.
The tape head is dirty.
• Tape sound is at very low
level and sound quality is
degraded.
Clean it with a head cleaning
tape.
• Sound is sometimes
interrupted.
Connections are not good.
Check the cords and
connections.
• Sound cannot be heard from
the speakers.
The volume is turned to the
minimum level.
Adjust it to the optimum level.
Connections are incorrect.
Signals are too weak.
Check the cords and
connections.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Store stations manually.
• Static noise while listening to
the radio.
The antenna is not connected
firmly.
Connect the antenna firmly.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
For KS-FX473R/KS-FX470R only:
Symptoms
Causes
Remedies
Insert CDs into the magazine.
Insert them correctly.
• “NO CD” or “NO DISC”
appears on the display.
No CD is in the magazine.
CDs are inserted incorrectly.
• “NO MAG” appears on the
display.
No magazine is loaded in the
CD changer.
Insert the magazine.
• “RESET 8” appears on the
display.
This unit is not connected to a
CD changer correctly.
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer.
• “RESET 1” – “RESET 7”
appears on the display.
Press the reset button of the CD
changer.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
CASSETTE DECK SECTION
AUDIO AMPLIFIER SECTION
Maximum Power Output:
Wow & Flutter: 0.15% (WRMS)
Fast-Wind Time: 190 sec. (C-60)
Frequency Response: 50 Hz to 14 000 Hz
(Normal tape)
Front:
Rear:
40 W per channel
40 W per channel
Continuous Power Output (RMS):
Front:
16 W per channel into 4 Ω, 40 Hz
Signal-to-Noise Ratio: 52 dB
Stereo Separation: 40 dB
to 20 000 Hz at no more than
0.8% total harmonic distortion.
16 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than
0.8% total harmonic distortion.
Rear:
GENERAL
Power Requirement:
Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Operating Voltage: DC 14.4 V
(11 V to16 V allowance)
Bass:
±10 dB at 100 Hz
Grounding System: Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W × H × D):
Treble: ±10 dB at 10 kHz
Frequency Response: 40 Hz to 20000 Hz
Signal-to-Noise Ratio: 70 dB
Line-Out Level/Impedance:
Installation Size: 182 mm × 52 mm × 150 mm
Panel Size: 188 mm × 58 mm × 14 mm
Mass: 1.3 kg (excluding accessories)
KS-FX473R/KS-FX470R: 2.0 V/20 kΩ load
(250 nWb/m)
KS-F363R/KS-F360R:
1.0 V/20 kΩ load
(250 nWb/m)
Design and specifications subject to change without
notice.
TUNER SECTION
Frequency Range:
FM:
AM:
87.5 MHz to 108.0 MHz
(MW) 522 kHz to 1620 kHz
(LW) 144 kHz to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)
50 dB Quieting Sensitivity:
16.3 dBf (1.8 µV/75 Ω)
Alternate Channel Selectivity (400 kHz):
65 dB
Frequency Response: 40 Hz to 15000 Hz
Stereo Separation: 30 dB
Capture Ratio: 1.5 dB
[MW Tuner]
Sensitivity: 20 µV
Selectivity: 35 dB
[LW Tuner]
Sensitivity: 50 µV
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN, GE, FR, NL
Download from Www.Somanuals.com. All Manuals Search And Download.
J
C
V
1001KKSMDTJEIN
|