DIGITAL VIDEO CAMERA
ENGLISH
GR-DV1
INSTRUCTIONS
YU30052-625-1
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
EN
3
About Batteries
DANGER! Do not attempt to take the batteries
apart, or expose them to flame or excessive heat, as
there is a risk of fire or explosion.
SAFETY PRECAUTIONS
CAUTION:
WARNING! Do not allow the battery terminals, or
the battery itself, to come in contact with metals, as
this can result in a short circuit and possibly start a
fire.
• When transporting, make sure the provided battery cap is
attached to the battery. If you misplace the battery cap,
carry the battery in a plastic bag.
Before recording an important scene . . .
..... make sure you only use cassettes with the Mini
DV mark.
..... remember that the GR-DV1 is not compatible
with other digital video formats.
..... remember that the GR-DV1 is intended for
private consumer use only. Any commercial use
without proper permission is prohibited. (Even if
you record an event such as a show, perform-
ance or exhibition for personal enjoyment, it is
strongly recommended that you obtain
permission beforehand.)
To avoid electric shock or damage to the unit,
first firmly insert the small end of the power
cord into the AC Power Adapter/Charger until
it is no longer wobbly, and then plug the
larger end of the power cord into an AC
outlet.
Do not point the lens or the viewfinder directly into
the sun. This can cause eye injuries, as well as lead
to the malfunctioning of internal circuitry. There is
also a risk of fire or electric shock.
The Benefits Of Lithium-Ion Batteries
Lithium-ion batteries are small yet have a large
power capacity. However, if exposed to extreme
cold (below 10°C), the effective operational time
decreases significantly. Exposure to temperatures
below 0°C will render the battery inoperative. If you
are planning to shoot in an environment at these
temperatures, carry the battery in a pocket to keep it
warm, then attach it just prior to recording. The
optional battery case CU-V777U is also recom-
mended. It holds two batteries, and keeps them
sufficiently warm even at an outside temperature of
0°C.
CAUTION! The following notes concern possible
physical damage to the camcorder and to the user.
When carrying, be sure to always attach and use
the provided hand strap. Hold the camcorder firmly
in your hand, with the strap securely around your
wrist. Carrying or holding the camcorder by the
viewfinder can result in dropping the unit, or in a
malfunction.
Take care not to get your finger caught in the
cassette cover. Do not let children operate the
camcorder, as they are particularly susceptible to
this type of injury.
Do not use a tripod on unsteady or unlevel surfaces.
It could tip over, causing serious damage to the
camcorder.
Lithium-ion is vulnerable in colder temperatures.
CAUTION! Attaching the camcorder to the Docking
Station, connecting cables (AUDIO/VIDEO,
S-VIDEO, Editing, DC) and leaving the unit on top
of the TV is not recommended, as tripping on the
cables will cause the camcorder to fall, resulting in
damage.
Keep the battery in a pocket when not in use, or use
the optional CU-V777U power grip.
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DVC
4
EN
The digital video camera converts incoming audio and video signals into digital form for recording.
A video signal is composed of a luminance signal (Y) and color signals (R-Y and B-Y). These signals are
identified and recorded digitally (Digital Component Recording). The A/D (Analog to Digital) converter
samples the Y signal at 13.5 MHz, and R-Y and B-Y at 6.75 MHz, and changes them to an 8-bit quantum signal.
Sound sampled at 48 kHz is changed to a 16-bit quantum signal, and sound sampled at 32 kHz is converted
to a 12-bit signal.
NOTE:
The data recorded on a tape is digital, but the output of the GR-DV1 is analog.
VIDEO
Luminance Signal (Y)
A/D
conversion
Lens
Recording by
rotating head
helical scan
Color Difference
Signal (R-Y/B-Y)
Chrominance (C)
A/D
conversion
Chromatic
Analysis
Signal
compression
AUDIO
Mic
A/D
conversion
The GR-DV1 separates the data into blocks, writing one block of each data type on each track of the tape.
Tape direction
Sub-Code Area
Video Area
Audio Area
ITI Area
Head tracking direction
12 tracks/frame
1 Sub-Code Area
3 Audio Area
The Time Code and Date/Time data are
written here, separate from the video
data. This enables you to display the date
and time during playback, even if they
weren’t displayed while recording.
The digital audio signal is recorded here.
4 ITI (Insert and Tracking
Information) Area
Insert editing and post-recording editing
tracking signals are recorded here.
2 Video Area
The digital video signal is recorded here.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
EN
5
ABOUT DVC
4
PROVIDED ACCESSORIES
GETTING STARTED
6
7
Indoor Use................................................................................ 7
Using The CAM Stand ................................................................... 7
Charging The Battery ................................................................... 8
Installing The Battery ................................................................... 9
Clock (Lithium) Battery CR2025 Insertion/Removal ............................. 10
Date/Time Settings ................................................................... 11
Loading/Unloading A Cassette ...................................................... 12
Hand Strap Attachment............................................................... 13
Diopter Adjustment ................................................................... 13
RM-V708U Remote Control ......................................................... 14
RECORDING
15
Full Auto/Manual Operation......................................................... 15
Menus................................................................................... 16
Basic Recording ........................................................................ 20
Advanced Features .................................................................... 22
PLAYBACK
41
Basic Connections...................................................................... 41
Playback Menu......................................................................... 44
Basic Playback ......................................................................... 46
Advanced Features .................................................................... 47
EDITING
49
Docking Station ........................................................................ 49
Dubbing ................................................................................. 49
Brand Setting .......................................................................... 50
Random Assemble Editing ............................................................ 51
For More Accurate Editing ............................................................ 54
Audio Dubbing ......................................................................... 56
Insert Editing ........................................................................... 57
AFTER USE
CONTROLS, INDICATIONS AND CONNECTORS
58
59
Main Unit ............................................................................... 59
Viewfinder Indications ................................................................ 60
Docking Station ........................................................................ 61
CAUTIONS
TROUBLESHOOTING
INDEX
62
64
67
68
SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
PROVIDED ACCESSORIES
6
EN
Soft camera case
AC Power
Remote control unit
RM-V708U
Adapter/Charger AA-V70EG
T
W
MiniDV Cassette Tape
30 min M-DV30ME
Docking Station
CAM Stand
Lithium battery x 2 CR2025
(one for clock operation and
one for remote control unit)
Battery pack
BN-V712U
Hand strap
Power cord
AUDIO and VIDEO cable
(Phono Docking Station
TV or VCR)
AUDIO and VIDEO cable
(ø3.5 DV TV or VCR)
Cable adapter
S-VIDEO cable
Editing cable
DC cord
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
EN
7
To AC outlet
AC POWER
ADAPTER/CHARGER
POWER CORD
MIC
AV-OUT
DC-IN 6V
Connector is under this cover
CAM STAND
DC CORD
Indoor Use
Using The CAM Stand
When using the camcorder indoors, you can use
the AC Adapter instead of a battery.
During Recording
If you record while leaving the camcorder on a desk
or table, it may tip or be accidentally knocked over.
Attach it to the CAM Stand before this type of use.
SUPPLY POWER TO ADAPTER
1 Connect the power cord between the AC
Adapter and an AC outlet.
SUPPLY POWER
1 Plug the DC Power Cord into the camcorder.
SUPPLY POWER TO CAMCORDER
2
Connect the AC Adapter to the camcorder.
ATTACH TO CAM STAND
2
Attach as shown in the illustration, paying
particular attention to the DC Power Cord.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (Cont.)
8
EN
Charging The Battery
You can charge one battery pack at a time, or two consecutively.
ATTACH
CHARGE INDICATOR 1
DETACH
CHARGE INDICATOR 2
BATTERY PACK BN-V712U
To AC outlet
RED
DC JACK
POWER LAMP
BLACK
POWER CORD
CHARGE MARKER
• The charge marker does not move
by itself. After charging or removing
a discharged battery, be sure to set
the marker to the predetermined
position.
SUPPLY POWER TO CHARGER
1 Connect the power cord between the AC
Power Adapter/Charger and an AC outlet. The
power indicator comes on.
CONFIRM STATUS
3
When the charge indicator stops blinking but stays
on, charging is finished. (If two batteries are attached,
this means that they’ve both been charged.)
CHARGING TIME
BATTERY
ATTACH BATTERY/BATTERIES
2
Remove the battery pack’s protective cap and
make sure the + – marks are facing down and
aligned with the corresponding marks on the
AC Power Adapter/Charger.
ONE
TWO
BN-V712U
approx. 140 min.
approx. 210 min.
DETACH BATTERY/BATTERIES
4 Slide the battery or batteries in the direction of
the arrow and lift off.
•The Charge Indicator begins blinking to
indicate charging has started.
•To charge two batteries consecutively, attach
one right after the other. If you attach a
second battery while the first one is being
charged, the time required for charging will
increase.
•Remember to unplug the power cord from
the AC Power Adapter/Charger.
Charge Marker
The charge marker makes it easy for you to differentiate between charged and discharged batteries. Choose
RED or BLACK to mean charged or discharged, and you'll always know the status of your batteries.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
NOTES:
Installing The Battery Pack
● If you connect the camcorder’s DC cord to the
adapter during battery charging, power is
supplied to the camcorder and charging stops.
● When using the AC Power Adapter/Charger, be
sure to use the supplied power cord only.
● The AC Power Adapter/Charger is for use with the
BN-V712U Battery Pack only.
The battery pack does not charge while in the
camcorder. Before installation, make sure the
battery pack has been charged fully.
● When charging the Battery Pack for the first time
or after a long storage period, the Charge
Indicator may not light. In this case, remove the
Battery Pack from the AC Power Adapter/Charger,
then try charging again.
BATTERY COVER
1
2
● Since the AC Power Adapter/Charger processes
electricity internally, it becomes warm during use.
Be sure to use it only in well-ventilated areas.
● Be sure to securely connect the power cord to the
AC Power Adapter/Charger.
● Before connecting to an AC outlet, connect the
power cord to the AC Power Adapter/Charger. If
you plug into an AC outlet first and the power
cord’s terminal comes in contact with a metal
surface or object, there is the possibility of a short
circuit or fire.
** Charging Environment
Perform charging where the temperature is between
10° and 30°C. (20°–25°C is the ideal temperature
range for charging.) If the environment is too cold,
charging may be incomplete.
3
BATTERY
Continuous Shooting
Continuous shooting is possible for approximately
30 minutes, under the following conditions:
•A BN-V712U Battery Pack is in use
•The temperature is approximately 20°C/68°F
OPEN BATTERY COVER
1 Move the cover in the direction of the arrow.
2
However, . . .
•If the temperature is below 10°C/50°F, or
•If Zoom or RECORD/STANDBY are engaged
repeatedly, continuous shooting capability is
reduced significantly. Before extended use, it is
recommended that you prepare enough battery
packs to cover 3 times the planned shooting time.
INSERT BATTERY
Remove its protective cap and insert the + –
end of the battery first.
CLOSE BATTERY COVER
3
NOTE:
To remove a discharged battery pack, simply open
the cover and slide the battery pack out.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (Cont.)
10
EN
Clock (Lithium) Battery CR2025 Insertion/Removal
This battery is necessary to operate the clock and to perform date/time settings.
BATTERY COVER
NOTES:
OPEN BATTERY COVER
1 Slide off as shown in the illustration.
2
● When the battery is depleted, the “ ” indicator
appears in the viewfinder after you turn the power
on.
REMOVE OLD BATTERY
Pull the battery holder out as shown, and slide
● See “SAFETY PRECAUTIONS” on page 2 for
information on safe handling of lithium batteries.
● After changing the lithium battery, reset the date
and time (੬ pg. 11).
the battery down and out of the holder.
INSERT NEW BATTERY
3
Insert the battery, with the “+” side showing, in
the holder. Then insert the battery holder in the
battery cover.
CLOSE BATTERY COVER
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
11
Date/Time Settings
If you set the date and time beforehand, the data will automatically be recorded separately from the video
signal.
Even if the date and time do not appear during recording, you can display them on the screen or remove
them from the screen at any time during playback.
VIEWFINDER
VIEWFINDER
WIDE MODE
OFF
20X
OFF
AGC
ZOOM
D I S
GA I N UP
ON SCREEN
OFF
T
D I SPLAY
OFF
TO FADER / W IPE MENU
TO P.AE / EFFECT MENU
TO DATE / TIME MENU
TO SYSTEM MENU
DATE/T I ME
25. 12. 96
17:30
W
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
RECORDING MENU
DATE/TIME MENU
ZOOM LEVER
MENU
SET
MANUAL
AUTO
FOCUS
EXP.
POWER DIAL
WB
SET
PRO
SELECT OPERATION MODE
INPUT DATE AND TIME
1 Set the Power Dial to “REC” and the Select 4 Place the pointer next to “DATE/TIME” by
Dial to “MANUAL”.
sliding the Zoom Lever. Press SET and “Day”
begins blinking.
ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears in
the viewfinder.
Using the Zoom Lever (slide toward “+” to increase
and toward “–” to decrease), input the day. Press
SET. Repeat the procedure to input the month, year,
hour and minute. Press SET when the pointer is next
to “END” to exit.
ACCESS DATE/TIME MENU
3
Place the pointer next to “TO DATE/TIME
MENU” by sliding the Zoom Lever. Slide
toward “+” to move up and toward “–” to
move down. Press SET and the Date/Time
Menu appears in the viewfinder.
NOTE:
If you don’t exit the Date/Time Menu, the clock
display will not move but the camcorder’s internal
clock continues to operate. Once you close the
menu, the date and time in the viewfinder begin
operation from the current date and time, with no
delay or loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (Cont.)
12
EN
Loading/Unloading A Cassette
If you have already installed a fully charged battery, you can open the door without external power.
CASSETTE HOLDER
OPEN/EJECT SWITCH
CASSETTE COVER
Erase protection switch
Make sure the
window side is
PUSH HERE
facing out.
• Closing the cassette cover before the cassette holder comes out may cause damage to the camcorder.
• When shooting again after already shooting a scene, a blank portion is recorded on the tape or a previously
recorded scene is erased (recorded over) if you open the cassette cover, regardless of whether the cassette holder
comes out or not. See page 26 for information about recording from the middle of a tape.
NOTES:
OPEN CASSETTE DOOR
● It takes a few seconds for the cassette holder to
open. Do not apply force.
1 Turn on the power, then slide the OPEN/EJECT
switch in the direction of the arrow. The
cassette cover releases. Open the cover in the
direction of the arrow until it locks. The holder
opens automatically.
● If you wait a few seconds and the cassette holder
doesn’t open, close the cassette cover and try
again.
● Be careful not to get your fingers caught in the
holder when it’s closing. If this happens, the
holder will open automatically after a few
seconds.
● When the camcorder is suddenly moved from a
cold place to a warm environment, wait a short
time before opening the cover.
•Do not touch internal components.
INSERT/REMOVE TAPE
2 Insert or remove a tape and press “PUSH
HERE” to close the cassette holder.
•Once the cassette holder is closed, it recedes
automatically. Wait until it recedes
completely before closing the cassette cover.
•When the battery's charge is low, you may
not be able to close the cover. Do not apply
force. Replace the battery with a fully
charged one before continuing.
** To protect valuable recordings . . .
..... slide the erase protection switch on the back of
the tape in the direction of “SAVE”. This prevents
this tape from being recorded over. If you decide
later that you do want to record on this tape, slide
the switch back to “REC” before loading the tape.
TAPE
DVM 30
DVM 60
RECORDING TIME
Approx. 30 min.
Approx. 60 min.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
Hand Strap Attachment
Diopter Adjustment
The provided Hand Strap helps you to keep a firm
hold on the camcorder. Make sure you never hold
the camcorder without using the Hand Strap.
Adjust the viewfinder display for best viewing.
VIEWFINDER
OFF
5S
POWER DIAL
DIOPTER ADJUST LEVER
2
1
PAUSE
ATTACH HAND STRAP
SELECT OPERATION MODE
1
Slide the strap through the eyelet, pulling
firmly to ensure secure attachment.
1 Set the Power Dial to “REC”.
ADJUST DIOPTER
2 Pull out the viewfinder and slide the Diopter
Adjust Lever.
•Slide in either direction, while looking at the
viewfinder display, until it looks best to you.
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED (Cont.)
14
EN
RM-V708U Remote Control Unit
You can use the RM-V708U to control the camcorder when it’s attached to the Docking Station.
RECORDING START/STOP Button (੬ pg. 57)
PAUSE IN connector (੬ pg. 51)
ZOOM Buttons (੬ pg. 47)
POWER ON/OFF Button
When the camcorder’s Power
Dial is set to “PLAY”, you can
turn the unit’s power on and off
using the RM-V708U.
DISPLAY Button (੬ pg. 56)
SHIFT Button (੬ pg. 47)
T
W
AUDIO MONITOR
Button (੬ pg. 56)
MBR SET Button (੬ pg. 50)
SLOW Rewind/Forward
Buttons (੬ pg. 42)
AUDIO DUBBING
Button (੬ pg. 56)
LEFT/RIGHT Buttons
(੬ pg. 47)
DOWN Button (੬ pg. 47)
INSERT Button (੬ pg. 57)
UP Button (੬ pg. 47)
FADE/WIPE Button
(੬ pg. 51)
EFFECT Button
(੬ pg. 48)
EFFECT ON/OFF
Button (੬ pg. 48)
Operation Buttons
(੬ pg. 47)
CANCEL Button (੬ pg. 52)
R.A. EDIT Buttons (੬ pg. 51)
Installing The Battery
The RM-V708U uses one lithium battery (CR2025).
PULL OUT BATTERY HOLDER
1
Pull out in the direction of the arrow while
pressing the knob as shown.
INSERT BATTERY IN HOLDER
2 With the “+” side up, place the lithium battery
(CR2025) in the holder.
RE-INSERT HOLDER
3 Slide the holder back in until you hear a click.
KNOB
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
EN
15
Full Auto/Manual Operation
The following chart shows you which functions are available in the Full Auto and Manual operation modes.
AUTO
FOCUS
EXP.
WB
SET
PRO
MANUAL
SELECT DIAL
FULL AUTO
MODE
MANUAL MODE
SELECT DIAL
SELECT DIAL POSITION
POSITION
AUTO
YES
FOCUS
YES
EXPOSURE
YES
WB
YES
PRO
YES
Snapshot (੬ pg. 22)
Scene (੬ pg. 19)*2
Self-Timer (੬ pg. 25)
YES*1
YES
YES
YES
YES
YES
YES
YES
YES
YES
Date/Time Display
ON
ON/OFF
ON/OFF
ON/OFF
ON/OFF
(੬ pg. 27)
Focus (੬ pg. 40)
AUTO
AUTO/MAN
ON/OFF
AUTO/LOCK
ON/OFF
AUTO/LOCK
ON/OFF
AUTO/LOCK
ON/OFF
D.I.Stabilizer (੬ pg. 17)*3 Not operational
Exposure Control
AUTO
AUTO/LOCK
AUTO/MAN
AUTO/LOCK
AUTO/LOCK
(੬ pg. 36)
White Balance (੬ pg. 38)
Digital Zoom (੬ pg. 23)
P.AE/Effects (੬ pg. 33)
FADER/WIPE (੬ pg. 28)
AUTO
AUTO/LOCK
ON/OFF
AUTO/LOCK
ON/OFF
AUTO/MAN
ON/OFF
AUTO/LOCK
ON/OFF
YES
20x only
Not operational
Not operational
YES (can't change once set)
YES (can't change once set)
YES
*1– Factory-preset for “5S”. However, if you change the setting in the System Menu (੬ pg. 18), either
“5SD” or “ANIMATION” becomes available when you engage the “AUTO” mode.
*2– Records in “AUTO” regardless of Select Dial setting.
•Make sure the Power Dial is in the “MANUAL” position when you make selections at the Recording Menu.
*3– When D.I.Stabilizer is set to “ON”, the shutter speed is automatically set to 1/100.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING (Cont.)
16
EN
Menus
The Recording Menu allows you to set these functions: Squeeze, Zoom Magnification, Digital Image
Stabilizer, Gain Up, Fade/Wipe (੬ pg. 28), P.AE/Effects (੬ pg. 33), Date/Time Menu, and System Menu.
The following selection procedure applies to Squeeze, Zoom Magnification, Stabilization and Gain Up.
VIEWFINDER
VIEWFINDER
OFF
20X
OFF
AGC
WIDE MODE
OFF
20X
OFF
AGC
WIDE MODE
ZOOM
ZOOM
D I S
GA I N UP
D I S
GA I N UP
T
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
W
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
RECORDING MENU
MENU
ZOOM LEVER
SET
MANUAL
AUTO
FOCUS
EXP.
POWER DIAL
WB
SET
PRO
SELECT DIAL
SELECT OPERATION MODE
Set the Power Dial to “REC” and set the Select
Dial to “MANUAL”.
SET FUNCTION PARAMETERS
Cycle through the available settings of the
selected functions by sliding the Zoom Lever in
either direction, and stop when the one you
want is displayed. Then press SET and the
pointer automatically moves to “END”.
1
4
ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears in
the viewfinder.
•To set the parameters for a different function,
repeat steps 3 and 4.
SELECT FUNCTION
3 Place the pointer next to the desired function
by sliding the Zoom Lever, then press SET. The
pointer stops blinking, indicating that the
function has been selected.
CLOSE RECORDING MENU
5 Press SET. Selection is complete and the menu
disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
DIS (Digital Image Stabilizer)
When recording while holding the camcorder in
your hand, or when shooting a subject with little or
no contrast, subtle hand movements will cause
shakiness in the recorded image.
10X
20X
100X
OFF
SQUEEZE
CINEMA
WIDE MODE
OFF
20X
OFF
AGC
ON–Compensates for relatively small shakes that
occur when shooting close up. “ ” appears in the
viewfinder during recording. *This function is
usable when the Select Dial is set to “MANUAL”.
OFF–When shooting with the camcorder in a fixed
position or on a tripod, set the Stabilizer to “OFF”.
If you leave it on and then move or turn the camera
to follow a moving subject, unnecessary
ZOOM
D I S
GA I N UP
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
compensation occurs and this can result in an
unnatural recorded image.
ITEM ZOOM SW .
SET SET BUTTON
END
NOTES:
ON
OFF
A
AGC
OFF
● The Stabilizer cannot compensate for drastic hand
movements while shooting.
● The Stabilizer will not work when certain
P.AE/ Effects (Classic Film, Strobe, Slow 1, 2
(੬ pg. 34) and Fade/Wipe Effects (Picture Wipe/
Dissolve (੬ pg. 30) are activated.
Wide Mode
This recording mode is compatible with
The “
” indicator appears blinking in the
wide-screen TVs (16:9 aspect ratio). When using
this mode, please refer to your wide-screen TV’s
instruction manual.
viewfinder.
Zoom Magnification
You can select 10x, 20x, or 100x zoom
magnifications.
SQUEEZE–For playback on TVs with an aspect ratio
of 16:9. Naturally expands the image to fit the
screen without distortion.
viewfinder.
appears in the
CINEMA–Inserts black bands at the top and bottom
of the screen. Works with both 4:3 and 16:9 TVs.
Used with the Sepia (੬ pg. 34) or Monotone
(੬ pg. 34) modes, it gives the recorded scenes the
look of a classic movie.
10x–Optical zoom that does not degrade the quality
of the recording.
20x–Electronic processing (Digital zoom) that lets
you get closer up.
100x–Electronically-processed images at 100-times
magnification.
OFF–Select “OFF” when you don’t want to use
either of the above modes (first set the Select Dial to
“MANUAL”). *During Full-Auto operation, both
Squeeze and Cinema modes are unusable.
Gain Up
When you watch a “SQUEEZE”- or “CINEMA”-
mode picture on a wide-screen TV, connect an S-
Video cable between connector S1 or S2 on the TV
and the S-Video output connector on the Docking
Station, and adjust the setting at the TV manually to
produce the appropriate 16:9 picture.
During playback, the images is naturally expanded
to fit the wide screen, with no proportional
distortion.
Bright, natural recordings can be taken even in
areas with low or poor lighting.
–The shutter speed is automatically adjusted (1/
A
25 — 1/200 sec.). Shooting a subject in low or poor
lighting at 1/25 sec. shutter speed provides a
brighter image than in the AGC mode, but the
subject’s movements are not smooth or natural.
OFF–Select this setting when lighting is not a
problem.
NOTES:
AGC–This is the factory setting, and is automatically
activated during Auto operation. The overall
appearance is jagged, but the image is bright and
● When recording using the Squeeze, the image in the
viewfinder, as well as on a regular TV (if connected for
playback) will be the standard aspect ratio and the
picture will appear squeezed.
the movements are more natural than in “
mode.
”
A
● When playing back a tape recorded in Squeeze and
Cinema, Squeeze cannot be distinguished from Cinema
during fast-forward or rewind.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING (Cont.)
18
EN
VIEWFINDER
VIEWFINDER
WIDE MODE
OFF
20X
OFF
AGC
ZOOM
SCENE
D I S
GA I N UP
5S
T
BEEP
ON
WIND CUT
SOUND MODE
I D No .
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
OFF
48kHz
07
W
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
RECORDING MENU
SYSTEM MENU
MENU
ZOOM LEVER
SET
MANUAL
AUTO
FOCUS
EXP.
POWER DIAL
WB
SET
PRO
SELECT DIAL
System Menu
The System Menu allows you to set the following functions: Scene, Beep, Wind Cut, Sound Mode and ID
numbers.
SELECT OPERATION MODE
Set the Power Dial to “REC” and set the Select
Dial to “MANUAL”.
SET FUNCTION PARAMETERS
Slide the Zoom Lever in either direction to
cycle through the available settings for the
selected function, and stop when the desired
setting appears. Then press SET, and the
pointer automatically moves to “END”.
1
5
ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears in
the viewfinder.
•To set the parameters for a different function,
repeat steps 4 and 5.
ACCESS SYSTEM MENU
3 Place the pointer next to “TO SYSTEM MENU”
by sliding the Zoom Lever, then press SET. The
System Menu appears in the viewfinder.
CLOSE SYSTEM MENU
6 Press SET twice. Setting is complete and the
System Menu disappears.
SELECT FUNCTION
4 Place the pointer next to the desired function
by sliding the Zoom Lever, then press SET. The
pointer stops blinking, indicating that the
function has been selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
5S
5SD
ANIM.
ON
OFF
SCENE
5S
BEEP
ON
OFF
WIND CUT
SOUND MODE
I D No .
OFF
48kHz
07
AUTO
48 kHz
32 kHz
ITEM ZOOM SW .
SET SET BUTTON
END
This number will be necessary in the future
when connecting the camcorder to a
computer [01 to 99].
Sound
Beep
Sound signals can be sampled at 48 kHz or 32 kHz.
The beep sounds when the power is turned on or
off, and at the beginning and end of recording.
48 kHz–The camcorder is factory-preset for 48 kHz.
This setting enables recording of stereo sound on
two separate channels. *A tape recorded at 48 kHz
cannot be used for Audio Dubbing.
32 kHz–This setting enables recording of stereo
sound on four separate channels, and is
recommended for use when performing Audio
Dubbing.
ON–To activate the beep.
OFF–To turn off the beep.
NOTE:
Beep is automatically turned on during Full Auto
operation.
Wind Cut
When activated, this mode helps cut down on noise
created by wind.
Scene (5-Second Mode)
This mode is enabled when the Power Dial is set to
“5S”.
AUTO–When shooting in high winds, noise is
automatically reduced.
•“ ” appears in the viewfinder.
•The quality of the sound will change. This is
normal.
5S–Pressing RECORDING START/STOP allows you
to take a 5-second “clip”. Press repeatedly for a
succession of short recordings.
5SD–If you record a 5-second clip within 5 minutes
after the previous one, the end of the old scene
dissolves and is replaced by the new scene over a
2-second period (੬ pg. 24).
ANIM. (Animation)–Each time you press
RECORDING START/STOP, a 1/8-second recording
is taken. By using an inanimate object and changing
its position between shots, you can record the
subject as though it’s moving.
OFF–This function is disabled.
NOTE:
The Wind Cut mode is disabled during Full Auto
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING (Cont.)
20
EN
Basic Recording
You should already have performed the necessary preparations (੬ pgs. 8 – 19). Set the Select Dial to
“AUTO” and try recording that way before attempting to use more advanced features.
OFF
VIEWFINDER
5S
REC
STANDBY
RECORDING
START/STOP
BUTTON
DURING
RECORDING
VIEWFINDER
POWER LAMP
PAUSE
AUTO
FOCUS
OFF
5S
EXP.
WB
SET
PRO
RECORD/STANDBY
NOTE:
Before starting recording, make sure you set the date and time (੬ pg. 11). Even if they don’t appear during
recording, they are recorded onto the tape and can be displayed during playback (੬ pg. 45).
END RECORDING
PULL OUT VIEWFINDER
5 When you’re finished recording, press
RECORDING START/STOP. Align the
viewfinder’s mark with “CAMERA OFF”; the
power lamp goes out and the lens cover closes
automatically.
1
Align its mark with “STANDBY”.
TURN ON POWER
2 Set the Power Dial to “REC”. The power lamp
comes on and RECORD/STANDBY mode is
engaged.
• When transporting, make sure the viewfinder is in
this position.
• Before turning the power on again, you must pull
out the viewfinder.
•If you don’t pull out the viewfinder, the
power cannot be turned on.
SELECT OPERATION MODE
3
Set the Select Dial to “AUTO”.
NOTES:
● If 5 minutes elapse in the RECORD/STANDBY mode, the
power shuts off automatically to conserve energy. To turn
the camcorder on again, set the Power Dial to “OFF”,
then to “REC”. As long as you don’t take out the tape you
were using or play it back, you can continue recording
from where you left off with no noticeable break.
● RECORD/STANDBY means that a tape is loaded and the
camcorder is ready to record.
•In the “AUTO” mode, only Zoom (20x),
Snapshot, 5S (if you change the setting in the
System Menu, either 5SD or ANIMATION
becomes available – see pgs. 18 – 19) and
Self-Timer are available.
START RECORDING
● If RECORD/STANDBY (Pause) is engaged for 5 minutes,
the Stop mode is automatically activated to protect the
heads.
● If you start a recording on a blank portion of the tape, or
onto a brand new tape, recording starts approximately
3-4 seconds after you press RECORDING START/STOP.
In order to record the entire scene or sequence, make
sure to start recording slightly in advance.
4 When “PAUSE” appears in the viewfinder,
press RECORDING START/STOP. A beep
signals the start of recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
30min
REC
29 min
1 min blinking
0 min blinking
2 min blinking
3 min
RE SHOOT
CAN.
Tape Remaining Indicator
The time remaining on the tape is automatically
monitored and displayed in the viewfinder
(੬ pg. 60). When the tape ends, “TAPE END”
appears in the viewfinder.
Re Shoot A Scene
If you aren’t pleased with a scene you just recorded
(after having checked it in the viewfinder), you can
easily return to the beginning and record it again.
ENGAGE RECORD/STANDBY MODE
1 Press RECORDING START/STOP, then press
RE SHOOT. The tape returns automatically to
the starting point of the most recent recording,
and the camcorder enters RECORD/STANDBY
mode.
•If, after the tape has rewound to the
beginning of the scene, you decide you don’t
need to re-record, press CAN. The tape auto-
matically fast-forwards to the end of the scene.
Stable Shooting Positions
Before pressing RECORDING START/
STOP, ZOOM or SNAP SHOT, be sure to
hold the camcorder with both hands.
Fasten hand strap around wrist
Feet set slightly
apart with your
body turned
toward the
subject
Lean against a wall
or pole for support
For low
shooting
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features
22
EN
STANDBY
PRESS SNAPSHOT DURING RECORDING
PRESS SNAPSHOT DURING RECORD/STANDBY
SNAPSHOT
Snapshot
REWIND TAPE
2
Press REW. Let the tape rewind to the begin-
Use your camcorder like a regular camera and take
a snapshot, or several of them in succession.
ning, where it stops automatically.
BEGIN SEARCH
PULL OUT VIEWFINDER
1 Align its mark to “STANDBY”. The lens cover
opens automatically.
3 Press SNAPSHOT. The camcorder begins
searching for the first scene recorded in
Snapshot mode or where the Strobe effect was
used.
TAKE SNAPSHOT
2 Press SNAPSHOT. “PHOTO” appears in the
viewfinder, and the image, bordered by a white
frame, will be recorded and displayed in the
viewfinder for 6 seconds. The next image then
gradually overlaps the snapshot and normal
recording resumes.
•If the first scene on the tape was recorded in
Snapshot mode or with the Strobe effect, the
camcorder may not be able to locate the
exact beginning of the scene.
Snapshot Search could malfunction if the
recorded tape has:
•When using the Snapshot function from
RECORD/STANDBY, the camcorder returns
to RECORD/STANDBY after 6 seconds.
•The sound effect of a shutter closing is
recorded together with the image.
•Too little time between Snap shots
•Blank space between recordings
•Snap shots taken using Motor Drive mode
To Stop A Snapshot Search In Progress . . .
..... press SNAPSHOT again.
Motor Drive mode:
NOTES:
Keeping SNAPSHOT pressed provides an effect
similar to serial photography. (The interval between
the still pictures: approx. 0.7 seconds)
● To temporarily stop playback, press PAUSE. This
is known as “still playback”. Press again to
resume normal playback. If still playback
continues for more than about 3 minutes, the
camcorder's Stop mode is automatically engaged.
If the camcorder is left in its Stop mode for 5
minutes, its power goes off automatically.
● In the future, by attaching the camcorder to the
Docking Station and connecting a video printer to
the station, it will become possible to print out
snapshots.
Snapshot Search
The Snapshot Search function enables you to
quickly and easily access scenes recorded in the
Snapshot mode, or scenes where Strobe was used.
ENABLE SNAPSHOT SEARCH
1 Set the Power Dial to “PLAY”.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
ZOOM LEVER
Digital zoom
zone
D
T
10X zoom
zone
W
ZOOM DISPLAY
T
ZOOM IN (T: Tight)
W
D
T
D
T
D
T
D
T
W
W
W
W
T
ZOOM OUT (W: Wide)
W
NOTE:
Zoom
Digital zoom (20x and 100x) cannot be used while
the Video Echo effect (੬ pg. 34), the Picture Wipe/
Dissolve function (੬ pg. 30) or the 5SD mode
(੬ pg. 24) are activated.
Select any one of the three powers of magnification
and get “closer” to the subject (੬ pg. 17).
Simply slide the Zoom Lever to either zoom in
(toward “+”) or zoom out (toward “–”). The Zoom
speed is variable — the quicker you slide the Zoom
Lever, the quicker the zoom action.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
24
EN
OFF
REC
PLAY
5S
RECORDING
START/STOP BUTTON
STANDBY
VIEWFINDER
REC
5S MODE
Dissolve in the 5-Second mode
After 5 sec.
Select “5SD” at the System Menu (੬ pg. 18).
“5SD MODE” appears in the viewfinder in step 2
below. Record one 5-second clip, and the image at the
end of the clip is stored. If you record the next clip
within 5 minutes, the previous scene dissolves as the
new scene appears.
PAUSE
5S MODE
* If you turn the power off, the stored image will be lost.
RECORD/STANDBY
Scene
Record a vacation or an important event in 5-second clips to keep the action moving. The 5-Second
function may also be activated during Full Auto operation. While the 5-Second mode is activated, Fade/
Wipe (੬ pg. 28), P.AE/Effects (੬ pg. 33) and other manual operations cannot be performed.
PULL OUT VIEWFINDER
Align its mark to “STANDBY”. The lens cover
opens automatically.
END 5-SECOND MODE RECORDING
When you’re done, set the Power Dial to the
“REC” or “OFF” position.
1
3
To Take A Snapshot In The 5-Second Mode . . .
..... instead of pressing RECORDING START/STOP
in step 2, press SNAPSHOT. The camcorder
records a 6-second still with the shutter sound,
but without the white border.
SELECT MODE
2 Set the Power Dial to “5S” and press RECORD-
ING START/STOP. “5S MODE” appears in the
viewfinder, the tally lamp lights to indicate the
start of recording, and after 5 seconds the
camcorder enters RECORD/STANDBY mode.
•If you press and hold RECORDING START/
STOP within 5 seconds after recording starts,
RECORD/STANDBY is not engaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
STANDBY
VIEWFINDER
OFF
F . AUTO
F . AUTO
– – –
REC
PAUSE
5S
After 15 sec.
RECORDING
START/STOP BUTTON
DURING RECORDING
Self-Timer
Once the camcorder is set, you (or whomever is operating the camcorder) can get into the scene, putting the
final touch on a memorable picture.
PULL OUT VIEWFINDER
Align its mark to “STANDBY”. The lens cover
opens automatically.
END RECORDING
1
3
Press RECORDING START/STOP and set the
Power Dial to the “REC” or “OFF” position.
To Take A Snapshot In The Self-Timer Mode . . .
..... in step 2, press SNAPSHOT instead of
RECORDING START/STOP. After 15 seconds, a
6-second still with the shutter sound effect and
a white border is recorded. After that, the
camcorder enters the RECORD/STANDBY
mode.
SELECT MODE
2 Set the Power Dial to “
” and press
RECORDING START/STOP. “ ” appears in
the viewfinder, and the tally lamp lights and
begins blinking 15 seconds before recording
starts. When the lamp stops blinking, recording
begins.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
26
EN
OFF
5S
OFF
5S
RECORDING
START/STOP BUTTON
STOP PLAY
/PAUSE
REW
FF
PLAY
/PAUSE
RE SHOOT CAN.
Recording From The Middle Of A Tape
When removing a tape on which you were recording, or when you resume recording on a tape after playing
back the recording previously made (without taking the tape out between recordings), perform this
procedure.
NOTES:
SELECT MODE
● Starting at 00:00:00 (MIN:SEC:FRAME), the
camcorder records a time reference signal from the
beginning of the tape. See page 45 for information
about displaying Time Codes.
1 Set the Power Dial to “PLAY”.
START SEARCH
2 Press PLAY, then press REW or FF. Watch in the
viewfinder for the spot where you want to
begin recording.
The video recording may not start from exactly
00:00:00.
● The Time Code cannot be reset.
● If you start recording from the end of the previous
recording leaving no blank space, there may be
situations where a clean transition is not possible.
● Whenever you start recording in a blank portion, the
Time Code counts from 00:00:00. That means the
camcorder may record the same Time Codes as a
previously-recorded segment. Random Assemble
Editing (੬ pg. 51) may not function properly when
using a tape with duplicated codes. To prevent this,
start recording from the end of the previous recording
leaving no blank space. Note that such a blank space
may be also left between scenes when a tape is
removed and re-inserted.
ENGAGE STILL MODE
3 Once you find the spot at which you want to
start recording, press PLAY/PAUSE to engage
the Still mode.
START RECORDING
4 Set the Power Dial to “REC” and press
RECORDING START/STOP.
● Even if you record over the blank space between two
already-recorded segments, the old Time Codes
remain after the newly-recorded portion, and thus
duplicated codes will still exist. Random Assemble
Editing (੬ pg. 51) may not function properly in the
case.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
VIEWFINDER
VIEWFINDER
WIDE MODE
OFF
20X
OFF
AGC
ZOOM
ON SCREEN
D I S
GA I N UP
OFF
T
D I SPLAY
OFF
DATE / TIME
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
25. 12. 96
17:30
W
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
RECORDING MENU
DATE/TIME MENU
ZOOM LEVER
MENU
SET
MANUAL
AUTO
FOCUS
EXP.
WB
SET
POWER DIAL
PRO
Displaying The Date And Time During Recording
You must first set the date and time (see “Date/Time Settings” ੬ pg. 11). Set “DISPLAY” to “ON” in the
Date/Time Menu. The Date/Time appears in the viewfinder if the Select Dial is set to “MANUAL”. The Date/
Time is always displayed in the viewfinder when the Select Dial is set to “AUTO”.
SELECT OPERATION MODE
SET FUNCTION PARAMETERS
1 Set the Power Dial to "REC" and the Select Dial 5 Cycle through the available settings of the
to “MANUAL”.
selected functions by sliding the Zoom Lever in
either direction, and stop when the one you
want is displayed. Then press SET and the
pointer automatically moves to “END”.
ACCESS RECORDING MENU
2 Press MENU. The Recording Menu appears in
the viewfinder.
ACCESS DATE/TIME MENU
3 Place the pointer next to “TO DATE/TIME
MENU” by sliding the Zoom Lever. Slide
toward “+” to move up and toward “–” to
move down. Press SET and the Date/Time
Menu appears in the viewfinder.
CLOSE RECORDING MENU
6 Press SET twice. Selection is complete and the
menu disappears.
NOTE:
Connect the camcorder to a TV and set “ON
SCREEN” to “ON” in the Date/Time Menu. The
display appears on the connected TV when the
camcorder is in RECORD/STANDBY.
INPUT DATE AND TIME
4
Place the pointer next to “DISPLAY” by sliding
the Zoom Lever, then press SET. The cursor
stops blinking, indicating that the function has
been selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
28
EN
VIEWFINDER
VIEWFINDER
FADER / W IPE SELECT
FADER / W IPE SELECT
OFF
T
OFF
W
K
H
WH ITE FADER
BLACK FADER
D I SSOLVE
CORNER W IPE
W INDOW W IPE
1
2
3
4
5
W
K
H
WH ITE FADER
BLACK FADER
D I SSOLVE
1
2
3
4
5
B
B
P
P
W
CORNER W IPE
W INDOW W IPE
ITEM ZOOM SW .
ITEM ZOOM SW .
FADER/WIPE MENU
After 2 sec.
EFFECT
AUTO
FOCUS
W
H
PAUSE
EXP.
WB
SET
PRO
SET
SELECT DIAL
POWER DIAL
FADE/WIPE Effects
Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to
scene.
Select any one effect from the Fader/Wipe Menu. To use effects that don’t appear in the menu, exchange
them (੬ pg. 32).
SELECT OPERATION MODE
Set the Select Dial to “PRO”. “EFFECT”
appears in the viewfinder.
START RECORDING
1
4
Press RECORDING START/STOP. The buzzer
sounds, indicating the start of recording.
ACCESS FADER/WIPE MENU
DEACTIVATE FADE/WIPE EFFECTS
2 Press SET. The Fader/Wipe Menu appears in 5 In step 3, place the pointer next to “OFF”.
the viewfinder.
SELECT EFFECT
NOTES:
3 Place the pointer next to the desired effect by
● If certain P.AE/Effects are activated, some Fade/Wipe
Effects cannot be used. If you select a Fade/Wipe
Effect that is unusable in the current situation, the
indication blinks.
sliding the Zoom Lever.
•Once you select the desired effect, the Fader/
Wipe Menu disappears and the effect is
activated within 2 seconds. The indicator
representing the selected effect appears in the
viewfinder.
● The P.AE Effect Menu is displayed if SET is pressed
twice. Press SET again to display the Fader/Wipe
Menu.
● Keep SET pressed to continue displaying the menu
until you make your selection using the Zoom Lever.
● Beep won't sound when the Select Dial is set to
“MANUAL” (੬ pg. 18) if “BEEP” is set to “OFF” in
the System Menu.
NOTE:
Refer to pages 29 – 31 for Fade/Wipe effects and
techniques.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
29
FADE
EXAMPLE
Fade In
W
H
WHITE FADER
Fade Out
WIPE
EXAMPLE
SCROLL WIPE
Wipe In
RECORDING
START/STOP BUTTON
Wipe Out
Fades and Wipes
A scene gradually appears on a black or white screen (Fade In/Wipe In), or disappears, leaving a black or
white screen (Fade Out/Wipe Out). Select Fade or Wipe at the Fader/Wipe Menu (੬ pg. 28).
SHUTTER WIPE:
ACTIVATE FADE IN OR WIPE IN
Wipe in toward the center of a black screen
1 Press RECORDING START/STOP to start
from the top and bottom, or wipe out from
recording, and the Fade In or Wipe In occurs
the center toward the top and bottom,
automatically.
leaving a black screen.
ACTIVATE FADE OUT OR WIPE OUT
When you want to stop recording the scene,
press RECORDING START/STOP. Before the
camcorder enters the RECORD/STANDBY
mode, the Fade Out or Wipe Out occurs
automatically.
SLIDE WIPE:
2
Wipe in from right to left, or wipe out from
left to right.
DOOR WIPE:
Wipe in as the two halves of a black screen
open to the left and right, revealing the
scene, or wipe out and the black screen
reappears from left and right to cover the
scene.
NOTE:
You can extend the length of a fade or wipe by
pressing and holding the RECORDING START/
STOP button.
CORNER WIPE:
Wipe in on a black screen from the upper
right to the lower left corner, or wipe out
from lower left to upper right, leaving a
black screen.
WHITE FADER:
Fade in or out with a white screen.
W
H
BLACK FADER:
Fade in or out with a black screen.
B
K
WINDOW WIPE:
BLACK & WHITE FADER:
Fade in to a color screen from a black and
white screen, or fade out from color to
black and white.
The scene starts in the center of a black
screen and wipes in toward the corners, or
comes in from the corners, gradually wiping
out to the center.
B/W
MOSAIC FADER:
Fade in or out with a full-screen mosaic
effect.
SCROLL WIPE:
The scene wipes in from the bottom to the top
of a black screen, or wipes out from top to
bottom, leaving a black screen.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
30
EN
Previous scene end
EXAMPLE
SCROLL WIPE
The next scene gradually
wipes in over the previous
scene.
P
Within 5 minutes . . .
RECORDING START/STOP
BUTTON
Wipe In
Picture Wipe/Dissolve
Combine the Picture Wipe and Dissolve functions for a professional transition effect. There are 6 Picture
Wipe effects and 1 Dissolve effect. Select the Picture Wipe effect at the Fader/Wipe Menu (੬ pg. 28). If you
want to use effects not currently appearing on the menu, exchange those appearing for others (੬ pg. 32).
SLIDE WIPE:
START RECORDING
P
P
The next scene gradually wipes in over
the previous one from right to left.
1
2
Press RECORDING START/STOP.
ENGAGE RECORD/STANDBY MODE
Press RECORDING START/STOP when one
scene is finished. The point at which the scene
ended is stored in memory.
DOOR WIPE:
The previous scene wipes out from the
center to the right and left, like a door
being pushed open to reveal the next
scene.
RESUME RECORDING
CORNER WIPE:
The new scene wipes in over the
previous one from the upper right corner
to the lower left corner.
3 If you start recording a new scene within 5
minutes of the end of the previous recording
(without having turned the camcorder’s power
off), the previous scene wipes out from bottom
to top, revealing the new scene.
P
P
WINDOW WIPE:
The next scene gradually wipes in from the
center of the screen toward the corners,
covering the previous scene.
NOTES:
● If you turn off the power after having finished
recording a scene, the stored point is erased.
This disables the Picture Wipe/Dissolve
combination. When this happens, the Picture
Wipe/Dissolve indicator blinks. Try recording
again, but don’t turn the power off when you’re
finished. The camcorder stores the end point of
the last recorded scene, and you can use Picture
Wipe/Dissolve between the last scene and the
next one.
SCROLL WIPE:
P
P
The new scene wipes in over the last one
from the bottom of the screen to the top.
SHUTTER WIPE:
The new scene wipes in over the
previous one from the center toward the
top and bottom of the screen.
DISSOLVE:
The new scene gradually appears as the
old one gradually disappears.
P
● The sound at the end of the last recorded scene is
not stored.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
RECORDING
START/STOP BUTTON
Random Variations
START RECORDING
1 Press RECORDING START/STOP, and “
”
?
R
appears in the viewfinder. The camcorder does
the rest, selecting an effect at random.
?
R
RANDOM FADER:
When this function is activated, the camcorder
randomly selects the effect used in scene transition
(from the Fade and Wipe effects).
•The recording starts with a Fade In or Wipe
In. If you press RECORDING START/STOP
during recording, RECORD/STANDBY mode
is preceded by a Fade Out or Wipe Out;
when you resume recording, it begins with a
Fade In or Wipe In.
B/W
W
H
BK
NOTES:
The camcorder chooses one of the fades/wipes at
random.
● The Picture Wipe/Dissolve feature is not available
when Random Fader is activated.
● When using MOSAIC FADER, a black bar may
appear at the bottom of the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
32
EN
WIDE MODE
ZOOM
OFF
20X
OFF
AGC
FADER /W IPE CUSTOMIZE
D I S
T
WH
GA I N UP
WH ITE FADER
BLACK FADER
D I SSOLVE
1
2
3
4
5
BK
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
P
CORNER W IPE
W INDOW W IPE
W
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
RECORDING MENU
FADER/WIPE CUSTOMIZE
MENU
ZOOM LEVER
SET
AUTO
FOCUS
EXP.
POWER DIAL
WB
SET
PRO
Exchanging FADE/WIPE Effects
You can replace the 5 effects currently appearing in the menu with 5 others. After exchanging, the new
effects appear in the Fader/Wipe Menu.
SELECT OPERATION MODE
SELECT NEW EFFECT
1
2
Set the Select Dial to “PRO”.
5
Cycle through the remaining effects by sliding
the Zoom Lever in either direction, and stop
when the one you want is displayed. Press SET.
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears in
the viewfinder.
•The pointer automatically moves to “END”.
•To replace other effects, repeat steps 4 and 5.
ACCESS FADER/WIPE CUSTOMIZE
CLOSE MENU
3 MENU
6 Press SET twice. Selection is complete, and
you can use the new effects during recording
(੬ pg. 28).
Place the pointer next to “TO FADER/WIPE
MENU” by sliding the Zoom Lever, then press
SET. The Fader/Wipe Customize Menu appears.
SELECT EFFECT TO BE REPLACED
4 Place the pointer next to the number of the
effect you want to replace by sliding the Zoom
Lever, then press SET. The cursor stops
blinking.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
VIEWFINDER
P . AE / EFFECT SELECT
OFF
VIEWFINDER
P . AE / EFFECT SELECT
OFF
T
1
2
3
4
5
1/250 SHUTTER 1/250
TW IL IGHT
1
2
3
4
5
1/250 SHUTTER 1/250
TW IL IGHT
SEP I A
SEP I A
B/
W
MONOTONE
B/
W
MONOTONE
W
CLASS IC F I LM
CLASS IC F I LM
ITEM ZOOM SW .
ITEM ZOOM SW .
P.AE/EFFECTS MENU
(FACTORY SETTING)
After 2 sec.
EFFECT
PAUSE
AUTO
FOCUS
EXP.
WB
SET
PRO
The indicator for the
selected mode appears, and
the selected mode is
engaged.
SET
SELECT DIAL
POWER DIAL
P.AE/Effects
You can choose any one of the effects from the P.AE/Effects Menu. In addition, you can exchange 5 of the 13
options that appear for other available effects (੬ pg. 35).
SELECT OPERATION MODE
1 Set the Select Dial to “PRO”. “EFFECT”
appears in the viewfinder.
DISABLE PRODUCTION EFFECT
4 To turn off the selected effect, re-access the
P.AE/Effects Menu and place the pointer next to
“OFF” by sliding the Zoom Lever.
ACCESS PRODUCTION EFFECTS
2 MENU
NOTE:
Press SET twice. The P.AE/Effects Menu appears
in the viewfinder.
If certain Fades or Wipes are activated, some
P.AE/Effects cannot be used, If you select a P.AE/
Effect that is unusable in the current situation, the
effect’s name or symbol begins flashing.
SELECT EFFECT
3 Place the pointer next to the desired effect by
sliding the Zoom Lever.
•Approximately 2 seconds after you place the
pointer, the P.AE/Effects Menu disappears and
the selected mode is activated. The name or
symbol of the selected mode appears in the
viewfinder.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
34
EN
MONOTONE
ߛ B/
W
Like classic black and white films, your footage is
shot in B/W. Used together with the Wide
Cinema function, it enhances the “classic film”
effect.
VIDEO ECHO
Adds a “ghost” to the subject, giving your
recording a “fantasy” feeling.
SEPIA
ߛ Recorded scenes have a brownish tint like old
photos. Combine this with the Cinema mode for
a classic look.
STROBE
CLASSIC FILM
ߛ Your recording looks like a series of consecutive
snapshots.
SHUTTER
(Variable
(Shutter
(Speed)
Gives recorded scenes a strobe effect.
TWILIGHT
ߛ 1/50–The shutter speed is fixed at 1/50th of a
second.
1/100–The shutter speed is fixed at 1/100th of a
second.
Makes evening scenes look more natural.
1/250 (factory preset), 1/500–These settings
allow fast-moving images to be captured one
frame at a time, for vivid, stable slow-motion
playback. The faster the shutter speed, the darker
the picture becomes. Use in areas with good
lighting.
** Checked “
ߛ ”effects are factory preset. To use other effects, refer to “Exchanging P.AE/
Effects” on page 35.
SLOW (Slow Shutter)
You can light dark subjects or areas even brighter
than they would be under good natural lighting.
x 4 = 4 times sensitivity
1
(shutter speed 1/12.5 sec.)
x 10 = 10 times sensitivity
(shutter speed 1/5 sec.)
2
NOTES:
● When using Slow, the image takes on a strobe-like effect.
● Use Slow only in dark areas.
● The Manual Focus indication may appear and flash when Slow is in use.
● If the image is out of focus, adjust manually. It is also recommended that you use a tripod, if
possible.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
VIEWFINDER
VIEWFINDER
WIDE MODE
OFF
20X
OFF
AGC
P . AE / EFFECT CUSTOMIZE
ZOOM
D I S
GA I N UP
1
2
3
4
5
1/250 SHUTTER1/250
TW IL IGHT
T
TO FADER / W IPE MENU
TO P . AE / EFFECT MENU
TO DAT E / TIME MENU
TO SYSTEM MENU
SEP I A
B/
W
MONOTONE
W
CLASS IC F I LM
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
RECORDING MENU
P.AE/EFFECT
CUSTOMIZE MENU
MENU
ZOOM LEVER
SET
AUTO
FOCUS
EXP.
WB
SET
POWER DIAL
PRO
SELECT DIAL
Exchanging P.AE/Effects
You can replace 5 of the effects that appear in the menu with 5 others.
SELECT EFFECT TO BE REPLACED
4 Place the pointer next to the number of the
effect you want to replace by sliding the Zoom
Lever, then press SET. The pointer stops
blinking.
SELECT MODE
1 Set the Select Dial to “PRO”.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears in
the viewfinder.
SELECT NEW EFFECT
ACCESS PRODUCTION EFFECTS
5 Cycle through the remaining effects by sliding
the Zoom Lever in either direction, and stop
when the one you want is displayed. Press SET.
3 CUSTOMIZE MENU
Place the pointer next to “TO P.AE/EFFECT
MENU” by sliding the Zoom Lever. Then press
SET and the P.AE/Effect Customize Menu
appears in the viewfinder.
•The pointer automatically moves to “END”.
•To replace other effects, repeat steps 4 and 5.
CLOSE MENU
6 Press SET twice. Selection is finished, and you
can use the new effect(s) in recording
(੬ pg. 33).
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
36
EN
EXP.
0
ZOOM LEVER
T
EXPOSURE DISPLAY
W
AUTO
FOCUS
OFF
5S
EXP.
WB
SET
SET
PRO
POWER DIAL
SELECT DIAL
Exposure Control
Usually this is adjusted automatically. However, when the background is too bright or too dark in compari-
son with the subject, adjust the Exposure manually.
To Return To Automatic Exposure Control . . .
SELECT MODE
..... set the Select Dial to “EXP”, then press SET
1 Set the Select Dial to “EXP”. “EXP” is displayed
quickly. The Exposure setting display disappears.
in the viewfinder.
Or set the Select Dial to “AUTO”.
ADJUST EXPOSURE
NOTES:
2 Slide the Zoom Lever while holding down SET.
Manual exposure adjustment is recommended in
the following situations:
The Exposure Control indicator appears in the
Viewfinder.
● When shooting using reverse lighting or when the
background is too bright.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When the background is overly dark or the
subject light.
•The adjustment range is from –6 to +6. Slide
toward “+” to brighten the image, or toward
“–” to darken it.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
37
L
IRIS LOCK INDICATOR
AUTO
FOCUS
OFF
5S
EXP.
WB
SET
SET
PRO
POWER DIAL
SELECT DIAL
Iris Lock
Use this function when shooting a moving subject, when zooming, when the subject changes its distance
(thus its size in the viewfinder), or when you want to lock the brightness level.
When the subject is close, keep the iris locked. Even when the subject moves away from you, the image will
not darken.
NOTES:
SELECT MODE
Iris lock is recommended in the following situa-
tions:
1
Set the Select Dial to “EXP”. “EXP.” is displayed
in the viewfinder.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When shooting objects under a spotlight.
● When the subject is backing away.
● When zooming.
CENTER SUBJECT, LOCK IRIS
2 Adjust zoom so that the subject fills the
viewfinder, then press and hold SET for about 2
L
seconds. The exposure setting display and “
appear, indicating that the iris is locked.
”
** Locking the exposure control and the iris
After step 1, adjust the exposure using the Zoom
Switch while holding SET. Then lock the iris in
step 2. For automatic locking, press SET quickly.
The iris becomes automatic after about 2
seconds.
To Return To Automatic Iris Control . . .
..... set the Select Dial to “EXP”, then press SET. The
L
exposure setting display and “ ” disappear. Or
set the Select Dial to “AUTO”.
Iris
Works like the pupil of the human eye. In a well-
lighted environment, the human pupil contracts to
keep too much light from enterintg. In low lighting,
the pupil dilates to allow more light in.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
38
EN
POWER DIAL
SELECT DIAL
AUTO
MWB
AUTO
FOCUS
EXP.
WB
SET
WHITE BALANCE SELECT
ZOOM LEVER
PRO
SET
WB
AUTO
MWB
PAUSE
T
W
White Balance Adjustment
A term that refers to the correctness of color reproduction under various lighting. If the white balance is
correct. all other colors will be accurately reproduced.
The white balance is usually adjusted automatically. However, when you want to shoot in various types of
lighting, or when shooting a scene with changing tint, use this function.
SELECT MODE
ENTER SELECTION
1 Set the Select Dial to “WB”. “WB” appears in 4 Press SET. Setting is complete and the indicator
the viewfinder.
representing the selected setting appears in the
viewfinder.
ACCESS WHITE BALANCE DISPLAY
Press SET. The White Balance display appears
in the viewfinder.
To Return To Automatic White Balance . . .
..... select “AUTO” in step 3. Or set the Select Dial to
“AUTO”.
2
3
ADJUST WHITE BALANCE
Slide the Zoom Lever in the appropriate
direction while watching in the viewfinder.
NOTES:
● White balance cannot be used when P.AE/Effects
Sepia or Monotone are activated.
● Confirm the tint setting on a TV before
connecting, to make sure the displays are as close
as possible.
AUTO–The white balance is adjusted automatically.
This is the factory preset position.
MWB
–When shooting with the white balance
already having been set on the subject (੬ pg. 39).
“
“
“
”– When shooting outdoors on a sunny day.
”–When shooting outdoors on a cloudy day.
”– When using a video light or other similar
type of lighting.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
39
AUTO
MWB
WHITE PAPER
AUTO
MWB
T
W
AUTO
WB
FOCUS
AUTO
MWB
PAUSE
EXP.
WB
SET
PRO
SET
MWB Operation
Set this function before shooting subjects under various types of lighting.
To Change The Tint For Recording . . .
SELECT MODE
..... In step 2, substitute colored paper for white. The
white balance is adjusted based on the color,
changing the tint. Red paper — deeper green;
blue paper — orange; yellow paper — deeper
purple.
1 In step 3 of the White Balance adjustment
(੬ pg. 38), select “MWB
”.
SET MWB
2
3
Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself
so that the white paper fills the screen.
NOTES:
● A subject can be shot under various types of
lighting conditions indoors (natural, flourescent,
candlelight, etc.). Because the color temperature
is different depending on the light source, the tint
of the subject will differ depending on the white
balance settings. Use this function for a more
natural result.
ENTER SETTING
Press and hold SET. When the MWB
indicator begins blinking, release the button.
The camcorder exits the menu and setting is
complete.
The MWB indicator
viewfinder.
appears in the
● Once you adjust white balance during MWB
operation, the setting is retained even if the power
is turned off or the battery removed.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING Advanced Features (Cont.)
40
EN
FOCUS ZONE (Focus is adjusted
at the center of the screen)
FOCUS
ZOOM LEVER
T
MANUAL FOCUS
INDICATOR
W
AUTO
FOCUS
OFF
5S
EXP.
WB
SET
SET
PRO
POWER DIAL
SELECT DIAL
Manual Focus Adjustment
The recorder, in most cases, adjusts the focus from 10 cm to infinity automatically. However, when focusing
is difficult or when the subject is not in the middle of the viewfinder, adjust the focus manually.
To Change To Auto Focus . . .
SELECT MODE
..... set the Select Dial to “FOCUS” and press SET
1
Set the Select Dial to “FOCUS”. “FOCUS” is
displayed in the viewfinder.
once quickly. The manual focus indications
disappear. Or set the Select Dial to “AUTO”.
ACCESS MANUAL FOCUS DISPLAY
NOTES:
2 Press SET. The Manual Focus display appears
in the viewfinder. The focus is locked at this
point.
Manual focus is recommended in the following
situations:
● When shooting a flat wall, a blue sky or an object
with little or no contrast.
● When wire or other obstacles come between the
camcorder and the subject.
● When shooting in dark places.
● When shooting objects with a detailed design or
pattern.
● When shooting under flourescent or flickering
lighting.
ADJUST FOCUS
3 While holding down SET, slide the Zoom Lever
toward “+” to adjust to faraway targets, or
toward “–” to focus on closer targets.
•When the focus reaches its near or far limit,
the “ ” or “ ” will begin blinking.
•When focus cannot be adjusted manually, try
zooming in or out, then try the manual focus
adjustment again.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Basic Connections
EN
41
POWER DIAL
RELEASE BUTTON
TO DC INPUT JACK
AC POWER ADAPTER/CHARGER
To AC outlet
LOCK LEVER
MULTI JACK
DOCKING STATION
POWER CORD
TO DC JACK
Docking Station Attachment
When you attach your camcorder to the Docking Station, you can add many interesting effects during
playback.
CONFIRM POWER-OFF STATUS
SELECT MODE
1
Make sure the camcorder’s power is off.
5
Set the Power Dial to “PLAY”.
PLACE CAMCORDER IN DOCKING
2 STATION
Using The Remote Control During Playback
Once the camcorder is attached to the Docking
Station, you can use the RM-V708U remote control
for regular playback, slow motion
If you plan to use the MENU button while the
camcorder is docked, you need to pull out its
viewfinder before attaching.
(approx. 1/10 speed– ੬ pg. 42), Playback Zoom
(੬ pg. 47), and P.AE/Effects (੬ pg. 48).
ATTACH AND LOCKS
3 Press down on the camcorder and slide the
Lock Lever in the direction of the arrow. The
camcorder and the Docking Station are now
securely attached.
Charging The Camcorder Battery
If you attach the camcorder with the battery
installed to the Docking Station, you can charge the
battery. Set the Power Dial to “OFF”, then perform
steps 1 through 4 of the Docking Station Attachment
procedure. The Docking Station’s charging lamp
starts blinking to indicate that charging has begun.
When it stops blinking but stays on, charging is
complete. It normally take approximately 170
minutes to charge using this method.
•Make sure that the camcorder does not have
a DC cord or an AV cable connected to it
before attaching.
•When removing the camcorder, press the
Release button and lift the camera out.
SUPPLY POWER
4
Connect the AC Adapter between the Docking
Station and an AC outlet.
•Do not attach or remove the battery while the
camcorder is attached to the Docking Station.
•The Docking Station cannot function using
the camcorder’s battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Basic Connections (Cont.)
42
EN
TV Playback
* Please refer to your VCR and/or TV instruction manual(s) when connecting.
NOTE:
During playback, if the camcorder is left on its side for an extended period, its surface will become very
warm. It is recommended that you use the Docking Station (੬ pg. 41) or the CAM Stand (੬ pg. 43) during
playback.
AC POWER
ADAPTER/CHARGER
TO DC
OUTPUT
JACK
DC CORD
TO S-VIDEO INPUT JACK
VIDEO OUT select switch
(Y/C or CVBS)
TO DC INPUT
JACK
When an
S-Video jack
is available.
S-VIDEO CABLE
Connect to AV
jack-equipped
TV or to VCR.
TO S-VIDEO OUTPUT JACK
TO AUDIO OUTPUT
JACKS (L/R)
TO AUDIO INPUT
JACKS (L/R)
Cable adapter (provided)
AUDIO and
VIDEO cable
VCR (Recording deck)
TO VIDEO INPUT JACK
RED
WHITE
RED
WHITE
YELLOW
TO VIDEO OUTPUT
JACK
YELLOW
CONNECT DOCKING STATION TO
END PLAYBACK
1 TV OR VCR
6 Press STOP and, if you’re not going to
continue using the camcorder, set the Power
Dial to “OFF”.
Connect as shown in the illustration.
TURN ON POWER
2 Turn on the power to the camcorder and the TV/VCR.
NOTES:
● To change from normal to slow-motion playback,
press PAUSE, then point the remote control at the
Docking Station and press SLOW. After playing
back in slow motion for about 20 seconds,
normal playback resumes. To stop slow-motion
playback in progress, press PLAY.
SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate for
3
video playback.
If Using A VCR . . . go to step 4.
If not . . . go to step 5.
● During slow-motion playback, due to digital
image processing, the picture may take on a
mosaic effect.
● Set the VIDEO OUT select switch of connector as
required: either to “CVBS” (with the direct VCR
connection) or to “Y/C” (with the RGB converter
connection).
CONNECT VCR OUTPUT TO TV
4 INPUT
Refer to your VCR’s instruction manual.
START PLAYBACK
Press PLAY. You can watch the scenes you recorded
5
on the TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
VCR/TV Connection
B
MIC
C
To AV OUT
AV-OUT
DC-IN 6V
c
b
a
A
CAM STAND
AUDIO and VIDEO cable
(ø3.5 DV TV or VCR)
VIDEO OUT select switch (Y/C or CVBS)
To AUDIO and
VIDEO IN
connectors
Cable adapter (provided)
CONNECT CAMCORDER TO TV OR
START PLAYBACK
1 VCR
6 Slide the cover (੬ pg. 44) and press PLAY.
You can watch the scenes you recorded on the
TV.
Connect as shown in the illustration.
ATTACH CAM STAND TO
END PLAYBACK
2 CAMCORDER
7 Press STOP and, if you’re not going to
continue using the camcorder, set the Power
pDial to “OFF”.
a
B
b
C
c
A
Line up
with
,
with
and
with
.
The CAM Stand has two sides. One side is
used to hold the camcorder upright and the
other side is used to hold the camcorder flat.
NOTES:
To choose whether or not the following displays
appear on the connected TV . . .
TURN ON POWER
3 Turn on the power to the camcorder and the
TV/VCR.
● Date/Time, Time Code
..... set to “ON” or “OFF” in the Playback Menu
(੬ pg. 45).
● Playback Sound Mode Display
..... set the Power Dial to “REC”, and set “ON
SCREEN” in the Date/Time Menu (੬ pg. 27)
to “ON” or “OFF”. Then set the Power Dial
back to “PLAY”.
SELECT TV’S VIDEO MODE
4
Set the TV to the channel or mode appropriate
for video playback.
If Using A VCR . . . go to step 5.
If not . . . go to step 6.
● Set the VIDEO OUT select switch of connector as
required: either to “CVBS” (with the direct VCR
connection) or to “Y/C” (with the RGB converter
connection).
CONNECT VCR OUTPUT TO TV
5 INPUT
Refer to your VCR’s instruction manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Playback Menu
44
EN
Playback Menu
The Playback Menu allows you to set the following functions: Playback Sound (48 kHz, 32 kHz), Synchro
Comp, Display and Time Code. The following procedure applies to all except Synchro Comp (੬ pgs. 54 – 55).
PLAYBACK MENU
FULL SOUND
SOUND 1
SOUND 2
48kHz MODE FULL SOUND
32kHz MODE SOUND
1
SYNCHRO
D I SPLAY
0 . 0
ON
ON
OFF
T I ME CODE OFF
ON
OFF
ITEM ZOOM SW .
SET SET BUTTON
END
POWER DIAL
MENU
ZOOM LEVER
48kHz MODE FULL SOUND
T
32kHz MODE SOUND
1
SYNCHRO
D I SPLAY
0 . 0
ON
T I ME CODE OFF
W
SET
ITEM ZOOM SW .
SET SET BUTTON
END
ACCESS PLAYBACK MENU
SET FUNCTION PARAMETERS
1 Press MENU. The Playback Menu appears in 3 Slide the Zoom Lever to cycle through the
the viewfinder and on the connected TV.
available settings for the selected function, and
stop when the desired setting appears. Then
press SET, and the pointer automatically moves
to “END”.
SELECT FUNCTION
2
Place the pointer next to the desired function
by sliding the Zoom Lever, then press SET. The
pointer stops blinking, indicating that the
function has been selected.
•To set parameters for other functions, repeat
steps 2 and 3.
CLOSE MENU
4 Press SET again, and the menu disappears.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
45
Playback Sound
During playback, the camcorder detects the sound mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany your playback picture. (48 kHz is preset to “FULL
SOUND” and 32 kHz is preset to “SOUND 1”.)
RECORDING SOUND
DISPLAY
FULL SOUND
SOUND 1
OUTPUT SOUND
48 kHz
Stereo sound
“L” sound is output on both channels
“R” sound is output on both channels
SOUND 2
32 kHz
FULL SOUND
SOUND 1
Stereo sound
SOUND 2
When watching a tape recorded at 48 kHz, if you want to change the output sound, access the Playback
Menu and, in step 3 on page 44, select “48kHz MODE” and set it for “FULL SOUND”, “SOUND 1” or
“SOUND 2”. When playing back a tape recorded at 32kHz, set in the same manner. For information on
output sound during Audio Dubbing, see page 56.
NOTES:
● You can also use the RM-V708U remote control’s AUDIO MONITOR Button to change the output sound
(without having to access the Playback Menu). Make sure you point the remote control at the Docking
Station’s sensor.
● During playback, the camcorder detects the sound mode in which the recording was made. This detection
cannot be made during fast-forward or rewind.
VIEWFINDER
MINUTES
SECONDS
25. 12. 96
FRAMES*
10:35
12 : 34 : 24
*25 frames = 1 second
Displaying The Time Code During
Playback
You can display the Time Code on screen during
playback. This is especially useful for editing. This
function is preset to “OFF”. To turn it on, select
“TIME CODE” at the Playback Menu and change
the setting. (੬ pg. 44)
Displaying the Date During Playback
If the time has been set, the date is automatically
recorded separately from the recorded video signal.
You can display or remove the date anytime during
playback. This function is preset to “ON”. To turn it
off, select “DISPLAY” at the Playback Menu and
change the setting. (੬ pg. 44)
ON– The date is displayed on the playback screen.
OFF–The date is not displayed.
ON– The Time Code is displayed on the playback
screen.
OFF–The Time Code doesn’t appear.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Basic Playback
46
EN
You can watch what you’ve recorded in the viewfinder.
OFF
POWER
LAMP
5S
REW
RE SHOOT
POWER DIAL
PLAY
/PAUSE
OPERATION PANEL
COVER
NOTES:
SELECT MODE
● You can also perform a High-Speed Search by
pressing and holding REW or FF during the PLAY
mode. The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
1 Pull out the viewfinder and set the Power Dial
to “PLAY”.
OPEN COVER
2
3
Slide the camcorder’s Operation Panel cover
as shown in the illustration.
● A slight mosaic effect appears on screen during
High-Speed Search. This is not a malfunction.
● The sound is not available during High-Speed
Search.
REWIND TAPE
Press REW. If you rewind all the way to the end
of the tape, it stops automatically.
Still Playback
WATCH RECORDING
To temporarily stop playback, press PAUSE. Press
again to resume playback. If still playback
continues for more than about 3 minutes, the
camcorder’s Stop mode is automatically engaged.
After 5 minutes in the stop mode, the camcorder’s
power is automatically turned off.
4 Press PLAY. You can watch the recording in the
viewfinder.
3
END PLAYBACK
5 Press STOP and set the Power Dial to “OFF”.
To Perform High-Speed Search . . .
..... press REW or FF after pressing PLAY. The tape
will move at approximately 9 times the normal
playback speed. Watch in the viewfinder and,
when you reach the spot you want to see, press
PLAY and normal playback resumes.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Advanced Features
EN
47
POWER DIAL
PLAY
PAUSE
Normal
playback
REMOTE SENSOR
ZOOM
SHIFT
Press T
T
W
LEFT/RIGHT/UP/DOWN
STOP
PAUSE
Press ᮣ (RIGHT)
to move image
RM-V708U (provided)
Playback Zoom
The recorded pictures can be magnified up to 10x at any time during playback.
FIND ‘ZOOM’ SCENE
END ZOOM
1 Press PLAY to start playback.
4 Press and hold W until magnification returns to
normal. Or, press STOP and then press PLAY.
ACTIVATE ZOOM
2 Press ZOOM on the remote control. Make sure
the remote control is pointed at the Docking
Station’s sensor.
NOTES:
● Zoom can also be used during slow-motion and
normal playback.
● If the Video Echo effect (੬ pg. 48) is selected
during playback zoom, playback zoom is
canceled.
•Pressing T zooms in.
LOCATE PORTION OF MAGNIFIED
3 SCENE
You can move the image on screen around to
find a particular portion of the picture. While
holding down SHIFT, press ᮤ (LEFT),
ᮣ (RIGHT), ᮡ (UP) and ᮢ (DOWN).
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK Advanced Features (Cont.)
48
EN
POWER DIAL
PLAY
REMOTE SENSOR
EFFECT SELECT
OFF
1
2
3
4
5
CLASS IC F I LM
MONOTONE
SEP I A
B/W
T
W
STROBE
V I DEO ECHO
P.AE EFFECT SELECT SCREEN
(Playback)
EFFECT
EFFECT ON/OFF
RM-V708U (provided)
Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 5 effects.
NOTE:
START PLAYBACK
To deactivate the selected effect, press
EFFECT ON/OFF on the remote control.
1
Press PLAY.
ACCESS PRODUCTION EFFECTS
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo. The effects work the same in playback as they
did in recording. Refer to page 34 for more
information.
2 MENU
Point the remote control at the Docking
Station’s sensor and press EFFECT. The
Production Effects Menu appears on the
connected TV.
SELECT EFFECT
3 Place the pointer next to the desired effect by
pressing EFFECT. After 2 seconds the menu
disappears and the selected function is
activated.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
Docking Station
EN
49
Refer to “Docking Station Attachment” on pages 41 and 42 for attachment procedures. Make sure the
camcorder is attached to the Docking Station before beginning editing.
Dubbing
You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR’s instruction manual
for details.
PLAY
STOP
POWER DIAL
VCR (Recording deck)
MAKE CONNECTIONS
END RECORDING
1 Connect the Docking Station to your VCR as 5 Press STOP to stop the source tape, and
shown in the illustration on page 42.
engage the VCR’s stop mode.
START PLAYBACK
NOTES:
2
3
Press PLAY to play back the source tape.
● You can use Playback Zoom (੬ pg. 47) or
Playback P.AE/Effects (੬ pg. 48) in step 2.
● Before you start dubbing, make sure that the
viewfinder indications don’t appear on the
connected TV. If they do appear during dubbing,
they are being recorded onto the new tape.
To clear the Playback Sound Mode Display, press
DISPLAY on the RM-V708U Remote Control.
● Select “DISPLAY” and “TIME CODE” from the
Playback Menu to show or hide the Date/Time
and the Time Code on the recording.
START RECORDING
While watching on the connected TV, engage
your VCR’s record mode from the spot on the
source tape you want to begin recording.
PAUSE RECORDING
Engage your VCR’s pause mode to stop
recording a segment.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING (Cont.)
50
EN
Brand Setting
Before you can perform Automatic Dubbing, or
control the VCR using the RM-V708U remote
control, you must set the VCR brand.
VCR (Recording deck)
The remote control is capable of controlling basic
VCR functions (PLAY, FF, REW, PAUSE, STOP). After
you’ve set the brand, point the remote at the VCR’s
sensor and press the appropriate button.
* Some video decks cannot be controlled.
There are two types of signals:
A [ Operation Confirmation
When the VCR does not operate . . .
B [ Operation Confirmation
3
T
W
MBR SET
SHIFT
1
6
2
4
5
The following procedure explains how to set the
VCR brand.
NOTE:
Make sure the VCR’s power is off before beginning
the procedure.
RM-V708U
(provided)
7 8 9 `
PRESS AND HOLD SET BUTTON
1 Make sure the remote control is pointed at the
VCR.
VCR CODE LIST
ENTER BRAND
VCR BRAND
NAME
BUTTONS
(A) (B)
VCR BRAND
BUTTONS
(A) (B)
2
3
Press the appropriate brand setting button from
the VCR Code List.
NAME
AKAI
6
6
7
2ꢀ
4ꢀ
7
PHILIPS
1
9
1
9
9
9
1
3
9ꢀ
5ꢀ
1ꢀ
4ꢀ
1ꢀ
6ꢀ
2ꢀ
3
RELEASE SET BUTTON
•Turn on the VCR’s power and make sure it is
operating properly.
•When the remote control’s battery expires,
reset the brand after installing a fresh battery.
BLAUPUNKT
FERGUSON
1
3
9
9
3
7ꢀ
8ꢀ
2
SANYO
3
3
6ꢀ
5
GRUNDIG
HITACHI
1
3
4ꢀ
4
SELECO, REX
SHARP
9
9
1ꢀ
6
6
6
6ꢀ
3
1
1
5ꢀ
`
JVC
A
B
C
9
9
9
1ꢀ
6ꢀ
3
SONY
6
6
3
3
5ꢀ
`ꢀ
9ꢀ
1
MITSUBISHI
6
6
7ꢀ
8
ꢀ
NEC
3
3
7ꢀ
8
9
9
9
3
1ꢀ
6ꢀ
7ꢀ
2
THOMSON,
TELEFUNKEN,
SABA,
PANASONIC
1
1
1
9
1
3ꢀ
7ꢀ
1ꢀ
4ꢀ
8
NORDMENDE
TOSHIBA
6
6
9ꢀ
1
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
51
Random Assemble Editing
Using the RM-V708U remote control, you can use P.AE/Effects and make an original edited tape.
SOURCE TAPE (Camcorder)
NEW TAPE (VCR)
T
W
TO REMOTE PAUSE
JACK
TO EDITING JACK
EDITING CABLE
TO S-VIDEO
OUTPUT JACK
TO S-VIDEO
INPUT JACK
RM-V708U
VIDEO OUT
select switch
(Y/C or CVBS)
S-VIDEO CABLE
TO AUDIO
INPUT JACKS (L/R)
TO AUDIO OUTPUT JACKS (L/R)
AUDIO and VIDEO cable
RED
RED
WHITE
WHITE
YELLOW
YELLOW
TO VIDEO OUTPUT JACK
TO VIDEO INPUT JACK
Cable adapter (provided)
If your VCR has the 21-pin AV input
connector (SCART), use the provided
cable adapter.
VCR (Recording deck)
MAKE CONNECTIONS
START SOURCE PLAYBACK
1 Connect the Docking Station to your VCR and 2 Press PLAY and then press R.A. EDIT ON/OFF
make sure that the playback picture and sound
are available on the connected TV (੬ pg. 42).
on the remote control. Make sure to point the
remote control at the Docking Station's sensor.
•The Random Assemble Editing Menu appears
on the TV screen.
•If you're not using a Fade/Wipe at the
PROGRAM 1 Edit-In point, go to step 4.
NOTES:
● When using a JVC VCR with a remote pause
terminal, connect the editing jack on the Docking
Station to the VCR’s remote pause terminal using an
editing cable.
● If the VCR has an S-Video input terminal, connect it
using an S-Video cable.
● If the VCR has only one audio input terminal,
connect it using a conversion plug.
● Set the VIDEO OUT select switch of connector as
required: either to “CVBS” (with the direct VCR
connection) or to “Y/C” (with the RGB converter
connection).
EXECUTE FADE/WIPE IN
3 Press FADE/WIPE.
•Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
•You can’t use a Picture Wipe/Dissolve at the
beginning of Program 1, or at the end of the
last scene.
To Operate The VCR With The Remote Control . . .
..... press and hold SHIFT, then press the
appropriate control button.
CONTINUED ON NEXT PAGE
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING (Cont.)
52
EN
PROGRAM
IN
OUT
:
MODE
:
1
2
3
4
5
6
7
8
~
~
~
~
~
~
~
~
RM-V708U (provided)
POWER DIAL
REMOTE SENSOR
:
T I ME CODE
TOTAL
00 : 00
T
W
RANDOM ASSEMBLE
EDITING MENU
FADE/WIPE
EFFECT
PLAY
EDIT IN/OUT
R.A.EDIT ON/OFF
CANCEL
NOTES:
SET EDIT-IN POINT
● When choosing a scene, set Edit-In and Edit-Out
points so there’s a relatively large difference
between them.
4
5
At the beginning of the scene, press EDIT IN/
OUT on the remote control. The Edit In
position appears in the viewfinder and on the
connected TV.
● If the search time for an in-point exceeds
5 minutes, the recording deck's Record-Standby
mode will be cancelled and editing will not take
place.
● If there are blank portions before or after the
Edit-In and Edit-Out points, a blue-backed screen
may be included in the edited version.
● Since time codes register time only as accurately
as seconds, the time code total time may not
match the total program time exactly.
● Turning off the camcorder’s power erases all
registered Edit-In and Edit-Out points.
● To use a P. AE/Effect, press EFFECT on the remote
control repeatedly to cycle through the effects
until the one you want is displayed.
● To change previously registered points, press
CANCEL on the remote control. The registered
points disappear, one at a time, from the most
recently registered point.
● If you use Sepia or Monotone P.AE/Effects, you
can’t use the Dissolve or Black & White Fader. In
this case the Dissolve or Black & White indicator
begins blinking. Once the next Edit-In point is
registered, the effect is turned off. To combine
these effects, use Sepia or Monotone during
recording, then use Dissolve or Black & White
Fader during Random Assemble Editing.
SET EDIT-OUT POINT
At the end of the scene, press EDIT IN/OUT.
The Edit Out position appears in the viewfinder
and on the connected TV.
USE FADE WIPE ON SCENE
6 TRANSITION
Press FADE/WIPE.
•Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
•If you select a Fade/Wipe effect for an
Edit-Out point, the effect is automatically
applied to the following Edit-In point.
•When you use Fade/Wipe effects, that time is
included in the total time (this does not apply
to Picture Wipe/Dissolve).
USE P.AE/EFFECT
7
8
Press EFFECT.
•Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
•You can use Classic Film, Monotone, Sepia,
Strobe or Video Echo effects.
CONTINUE EDITING
Repeat steps 4 – 7.
•If you're not using Fade/Wipe or P.AE/Effects,
repeat steps 4 and 5 only.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
53
IN
OUT MODE
W
H
P
1
2
3
4
5
6
7
8
00 : 25~02 : 05
07 : 18~08 : 31
03 : 33~05 : 53
09 : 30~13 : 15
P
B/W
:
15 : 55~
~
~
~
FF
T I ME CODE
TOTAL
15 : 55
09 : 02
REW
R.A.EDIT PROGRAM SCREEN
STOP
EDIT
RM-V708U
(provided)
T
W
FADE/WIPE
EFFECT
EDIT IN/OUT
VCR RECORD/STANDBY
PREPARE SOURCE TAPE
9 Rewind the tape in the camcorder to the
beginning of the scene you want to edit and
press PAUSE.
STOP EDITING
12
Engage the STOP modes for the camcorder and
the recorder.
NOTES:
ENGAGE VCR'S RECORD-PAUSE
10 MODE
● During dubbing, make sure the remote control is
pointed at the recorder’s sensor, and that the path
between the two is unobstructed.
Point the remote control toward the VCR's
infrared sensor and press VCR RECORD/
STANDBY, or manually engage the VCR's
Record-Pause mode.
● If, during dubbing, you press a button on the
camcorder, its RECORD/STANDBY mode is
automatically engaged.
● Random Assemble Editing may not function
properly when using a tape including several
duplicated Time Codes. ((੬ pg. 26)
● When using MOSAIC FADER, black bars may
appear at the bottom and left of the screen.
START EDITING
11
Press EDIT on the Docking Station. Editing
proceeds as programmed, right through to the
end of the last registered scene.
•If you selected a Fade/Wipe effect, it is active
between selected scenes during dubbing.
•If you selected a P.AE/Effect, it is active
during scenes while dubbing.
•When dubbing is complete, the camcorder
enters the PAUSE mode, and the recorder
enters its RECORD/STANDBY mode.
•If you don’t register an Edit-Out point, the
tape will be dubbed all the way to the end
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING (Cont.)
54
EN
VCR (Recording deck)
REMOTE SENSOR
PROGRAM 1
IN
OUT
:
MODE
RM-V708U
(provided)
:
1
2
3
4
5
6
7
8
~
~
~
~
~
~
~
~
T
W
T I ME CODE
TOTAL
:
00 : 00
ON/OFF
R.A.EDIT PROGRAM SCREEN
For More Accurate Editing
Some VCRs make the transition from RECORD/STANDBY to RECORD mode faster than others. Even if you
begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or
find that you’ve recorded scenes you didn’t want. For a cleanly edited tape, confirm and adjust the timing of
the camcorder against your VCR.
PREPARE FOR R.A. EDIT
PLAY BACK DUBBED SCENE
1
Play back the tape in the camcorder, then point
the remote control at the Docking Station’s
remote sensor and press R.A. EDIT ON/OFF.
3
•If any images from the scene prior to the
transition you chose for your Edit-In point
were recorded, that means your VCR moves
quickly from RECORD/STANDBY to
RECORD.
•If the scene you tried to dub starts in
progress, the VCR is slow to start recording.
•”R.A. EDIT” appears on the TV screen.
CHOOSE A SCENE
2 Perform Random Assemble Editing on
PROGRAM 1 only. In order to check VCR and
camcorder timing, select the beginning of a
scene transition as your Edit-In point.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
55
VCR (Recording deck)
SET
MENU
POWER DIAL
ZOOM LEVER
STOP
PLAY
48kHz MODE FULL SOUND
32kHz MODE SOUND1
FULL SOUND
48kHz MODE
32kHz MODE
SYNCHRO
SOUND
–0.1
ON
1
T
SYNCHRO
D I SPLAY
0 . 0
ON
D I SPLAY
T I ME CODE OFF
T I ME CODE OFF
W
ITEM ZOOM SW .
SET SET BUTTON
ITEM ZOOM SW .
SET SET BUTTON
END
END
PLAYBACK MENU
SELECT OPERATION MODE
INPUT CORRECTION DATA
4 Set the Power Dial to “PLAY” and press PLAY. 7 If the VCR is quick, slide the Zoom Lever
toward “–”; if the VCR is slow, slide toward
“+”. The adjustment range is from –1.3 to +1.3
seconds, in 0.1-second increments.
ACCESS PLAYBACK MENU
5 Press MENU. The Playback Menu appears on
the TV screen.
CLOSE MENU
SELECT FUNCTION
8 Press SET twice.
6
Place the pointer next to “SYNCHRO” by
sliding the Zoom Lever, then press SET. The
pointer stops blinking, indicating that the
function has been selected.
•Now perform Random Assemble Editing
beginning with step 2 on page 51.
NOTE:
Depending on the recorder, there may be situations
where the timing difference cannot be fully
corrected.
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING (Cont.)
56
EN
Audio Dubbing
Using a tape recorded at 32 kHz, you can customize the soundtrack of a tape you’ve recorded.
NOTE:
Audio Dubbing is not possible on a tape recorded at 48 kHz.
POWER DIAL
EXT. MIC INPUT
CONNECTOR
REMOTE SENSOR
T
W
AUDIO MONITOR
DISPLAY
STOP
6e
A.DUB
PLAY
PAUSE
AUDIO DUB STANDBY
RM-V708U (provided)
FIND EDIT-IN POINT
PAUSE DURING DUBBING
1
Play back the tape to locate the point where
editing will start, then press PAUSE.
4
5
Press PAUSE.
STOP DUBBING
CONNECT EXTERNAL
Press STOP.
2 MICROPHONE
Connect an optional stereo microphone. Then
while holding A. DUB on the remote control,
press PAUSE.
NOTES:
● When editing onto a tape that was recorded at 32 kHz,
the old and new soundtracks are recorded separately.
● To select the desired sound for playback, press AUDIO
MONITOR on the remote control.
•Pull out the viewfinder and “6e” appears.
•Press DISPLAY on the remote control if
sending the image to a connected TV.
● If you dub onto a blank space on the tape, the sound may
be disrupted. Make sure you only edit recorded areas.
● If feedback or howling occurs, move the Docking
Station so the camcorder’s microphone is away from the
TV, or turn down the TV’s volume.
● If you change from 32 kHz to 48 kHz in mid-recording
and then use the tape for Audio Dubbing, it is not
effective from the point where 48 kHz recording began.
BEGIN DUBBING
3 Press PLAY, then begin “narrating” using the
external microphone.
RECORDING SOUND
DISPLAY
FULL SOUND
SOUND 1
OUTPUT SOUND
32 kHz
Original and new tracks are combined and output in stereo.
Original track is output on both "L" and "R" channels in stereo.
New track is output on both "L" and "R" channels in stereo.
SOUND 2
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
57
Insert Editing
You can insert snapshots and other scenes in previously recorded footage.
Place photo, etc.
on its side.
POWER DIAL
REMOTE SENSOR
RECORDING START/STOP
DISPLAY
6w
T
W
INSERT
PLAY
12:34
PAUSE
REW(IND)
RM-V708U (provided)
FIND EDIT OUT POINT
Confirm the time code at this point.
(੬ pg. 45)
START RECORDING
1
2
4
Press RECORDING START/STOP to begin
editing.
FIND EDIT IN POINT
Press REW until the point is located, then press
PAUSE.
•Confirm the insert at the time code you
checked in step 1.
PAUSE DURING EDITING
5 Press RECORDING START/STOP. Press again
PREPARE FOR INSERT EDITING
3 Press and hold INSERT on the remote control,
then press PAUSE. “6w” and the Time Code
(min.:sec.) appear in the viewfinder.
to resume editing.
STOP EDITING
6 Press RECORDING START/STOP, then press
STOP.
NOTE:
To see the on-screen characters on a connected TV,
press DISPLAY on the remote control.
(੬ pg. 49)
NOTES:
● When performing Insert Editing, the tape’s Video
Area and Sub-Code Area (੬ pg. 4) are rewritten,
so the date and time information changes.
● If you perform Insert Editing onto a blank space
on the tape, the audio and video may be
disrupted. Make sure you only edit recorded
areas.
Download from Www.Somanuals.com. All Manuals Search And Download.
AFTER USE
58
EN
CASSETTE DOOR
VIEWFINDER COVER
BATTERY PACK
CASSETTE HOLDER
Audio/Video cable (ø3.5 DV TV or VCR)
CAM STAND
Cleaning The Camcorder
RESET VIEWFINDER
CLEAN EXTERIOR
7 Close the viewfinder's cover and push the
1
2
Wipe gently with a soft cloth.
viewfinder back in.
CLEAN LENS
Blow it with a blower brush, then wipe gently
with lens cleaning paper.
CLOSE CASSETTE DOOR
8
REMOVE POWER SUPPLY
3 Remove the battery pack or disconnect the AC
Audio/Video Cable And CAM Stand
Power Adapter/Charger.
OPEN CASSETTE DOOR
WRAP CABLE AROUND STAND
4 There is no power to the camcorder, so the 1 Position the plug of the Audio/Video cable
cassette holder won't open.
(ø3.5 DV TV or VCR) as shown in the
illustration, then wrap the cable around the
stand in the direction indicated.
PULL OUT VIEWFINDER
5 Pull out the viewfinder and slide its cover
open.
CONFIRM PLUG POSITION
2
Make sure the white, red and yelow plugs are
positioned as shown in the illustration.
CLEAN VIEWFINDER
6
Remove dust using blower brush or cotton
swab (commercially available).
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, INDICATIONS AND CONNECTORS
Main Unit
EN
59
Battery Pack Remaining Power Indicator changes as follows
according to the battery pack’s remaining power level:
1
2
(Blinks)
Fullly
charged
2/3 Charge
Remaining
1/3 Charge
Remaining
No Charge
Remaining
3
When the power is almost gone, the indicator blinks, then the
unit shuts off. Replace the battery pack with a fully charged one.
4
5
%
^
0 !
RTC
6
7
8
M
S
&
*
(
)
@
#
9
$
STOP
e w
q
y t
r
PLAY
PAUSE
FF
CAN.
REW
RE SHOOT
1 MENU Button (੬ pg. 16)
2 White Balance Sensor
@ Remaining Battery Power Indicator (੬ pg. 59)
# “No Tape Loaded” Indicator
$ Tape Advance Buttons (੬ pg. 21)
% Stereo Microphone
* Take care not to cover the sensor with your hand
while shooting.
3 Lens (੬ pg. 7)
4 Tally Lamp
^ Power Lamp (੬ pg. 20)
& OPEN/EJECT Switch (੬ pg. 12)
* Zoom Lever (੬ pg. 11)
The tally lamp lights while recording is in progress.
5 SNAPSHOT Button (੬ pg. 22)
6 Ext. Mic Input Jack (੬ pg. 7)
7 AV Output Jack (੬ pg. 7)
8 DC Input Jack (੬ pg. 7)
( Select Dial (੬ pg. 15)
) SET Button (੬ pg. 16)
q Battery Cover (੬ pg. 9)
w RECORDING START/STOP Button (੬ pg. 20)
e Power Dial (੬ pg. 11)
9 Multi Connector
* Located inside the cover. Connect to the Docking
r Diopter Adjust Lever (੬ pg. 13)
t Tripod Mounting Socket
y Hand Strap Eyelet (੬ pg. 13)
Station’s multi connector. To avoid malfunction, do
not touch this connector or force the cover open.
0 LCD Display Window
! Remaining Tape Time (during recording)
Time Code (during playback)
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, INDICATIONS AND CONNECTORS (Cont.)
Viewfinder Indications
60
EN
p
o
i
48kHz / FULL
1
2 3 4 5 6 7 8
F . AUTO
1 A
P
30min
REC
9
!
#
0
D
T
y
PAUSE
TAPE!
L
PHOTO
6we
0
@
$
t
r
u
%
&
e
5 SD MODE
SOUND 32kHz
0 0 : 0 0 : 0 0
^
W
25. 12. 96
10 : 35
w q ) (*
Recording And Playback
No.
1
2
3
4
NAME & FUNCTION
No.
$
NAME & FUNCTION
“No Tape Loaded” Indicator
Appears for 15 seconds after power is turned on
if there's no tape loaded.
Select Dial Position
GAIN UP Indicator
Wide Mode
(੬ pg. 15)
(੬ pg. 17)
(੬ pg. 17)
%
Clock Battery Warning
“Battery Low” Indicator
Appears when the clock (lithium) battery is not
in place or exhausted. For inserting or replacing
the clock battery, refer to page 10.
Appears and blinks when battery charge is low.
Digital Image Stabilizer Indicator
(੬ pg. 17)
5
^
&
*
(
)
q
w
e
r
t
y
u
i
o
p
—
—
Wind Cut Indicator
Date/Time Display
Recording Mode Indicator
Sound Mode Display
Time Code Display
Snapshot Indicator
Self-Timer Indicator
Focus Indicators
(੬ pg. 19)
(੬ pg. 11)
(੬ pg. 24)
(੬ pg. 19)
(੬ pg. 26)
(੬ pg. 22)
(੬ pg. 25)
(੬ pg. 40)
(੬ pg. 38)
(੬ pg. 36)
(੬ pg. 37)
(੬ pg. 23)
(੬ pg. 28)
(੬ pg. 33)
6
7
Record-Standby Indicator
(੬ pg. 24)
“Cassette Loaded” Indicator
Appears when no tape is loaded, or when you
try to record with the record safety tab set to
“SAVE”.
8
Condensation Warning
When this indicator appears, all functions are
disabled. Turn the unit off for a few hours, and
when you turn it on again the indicator should
disappear.
White Balance Indicator
Exposure Indicator
Iris Lock Indicator
Zoom Level Indicator
FADE/WIPE Indicator
P.AE/Effect Indicator
9
0
!
@
Tape Remaining Indicator
Recording Indicator
(੬ pg. 21)
(੬ pg. 20)
(੬ pg. 20)
“Tape Running” Indicator
Audio Dubbing/Insert Editing Mode
Indicator
(੬ pgs. 56, 57)
#
Head clog warning
Playback Sound Mode Display (੬ pg. 45)
At the start of recording, appears and
blinks if dirt is detected on heads. Stop
recording and clean the heads using the
“Tape End” Indicator
(੬ pg. 21)
An error number (E01, etc.)
appears in the viewfinder
Consult your nearest JVC dealer.
Cleaning Cassette.
(੬ pg. 63)
(੬ pg. 66)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
61
Docking Station
1 2 3 45
6
# $ % ^
&
@ ! 098
7
) ( *
1 Fan
Comes on automatically when camcorder is
@ Remote Control Sensor ....................... ੬ pg. 47
# JLIP Jack (Joint Level Interface Protocol)
In the future, it will be used to connect the
camcorder to a device such as a personal
computer.
$ Video Output Jack .............................. ੬ pg. 42
% Multi Jack ........................................... ੬ pg. 41
^ Audio Output Jack [L] ........................ ੬ pg. 42
& DC Input Jack ..................................... ੬ pg. 42
* S-Video Output Jack ........................... ੬ pg. 42
( Audio Output Jack [R] ........................ ੬ pg. 42
attached; serves to cool the unit down. Take care
not to interfere with the blades.
2 EDIT Button ........................................ ੬ pg. 53
3 CHARGE Indicator ............................. ੬ pg. 41
4 PAUSE Button
5 PLAY Button ....................................... ੬ pg. 47
6 RELEASE Button .................................. ੬ pg. 41
7 Lock Lever .......................................... ੬ pg. 41
8 Fast-Forward (FF) Button
9 Rewind (REW) Button......................... ੬ pg. 53
0 STOP Button ....................................... ੬ pg. 49
! EDIT Jack ............................................ ੬ pg. 51
) DC Output Jack
For future use.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
62
EN
Battery Packs
Cassettes
The supplied battery pack is a lithium-ion battery.
Before using the supplied battery pack or an
optional battery pack, be sure to read the following
cautions:
To properly use and store your cassettes, be sure to
read the following cautions:
1. During use . . .
.... make sure the cassette bears the Mini DV
mark.
.... be aware that recording onto prerecorded
tapes automatically erases the previously
recorded video and audio signals.
.... make sure the cassette is positioned properly
when inserting.
.... do not load and unload the cassette
repeatedly without allowing the tape to run
at all. This slackens the tape and can result in
damage.
Cap
Terminals
Battery
1. To avoid hazard . . .
.... do not burn.
.... do not open the front tape cover. This
exposes the tape to fingerprints and dust.
.... do not short-circuit the terminals.
.... do not modify or disassemble.
.... use only specified chargers.
2. Store cassettes . . .
.... away from heaters or other heat sources.
.... out of direct sunlight.
2. To prevent damage and prolong service
life . . .
.... where they won’t be subject to unnecessary
shock or vibration.
.... where they won’t be exposed to strong
magnetic fields (such as those generated by
motors, transformers or magnets).
.... vertically, in their original cases.
.... do not subject to unnecessary shock.
.... charge in an environment where
temperatures are within the tolerances shown
in the chart below. This is a chemical
reaction type battery—cooler temperatures
impede chemical reaction, while warmer
temperatures can prevent complete charging.
.... store in a cool, dry place. Extended exposure
to high temperatures will increase natural
discharge and shorten service life.
.... avoid prolonged uncharged storage.
.... remove from charger or powered unit when
not in use, as some machines use current
even when switched off.
3. To prevent damage to the camcorder . . .
.... replace the battery pack when it begins to
deliver less recording time per charge.
NOTE:
It is normal for the battery pack to be warm after
charging, or after use.
Temperature Ranges
Charging ................................... 10°C to 35°C
Operation ................................. 0°C to 40°C
Storage...................................... –10°C to 30°C
NOTES:
● Recharging time is based on room temperature of
20°C.
● The lower the temperature, the longer recharging
takes.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
63
5. Dirty heads can cause the folowing
Main Unit
1. For safety, DO NOT . . .
problems:
•No picture during
playback.
.... open the camcorder’s chassis.
.... disassemble or modify the unit.
.... short-circuit the terminals of the battery pack.
Keep it away from metallic objects when not
in use.
.... allow inflammables, water or metallic objects
to enter the unit.
.... remove the battery pack or disconnect the
power supply while the power is on.
.... leave the battery pack attached when the
camcorder is not in use.
•Blocks of noise appear
during playback.
•During recording, the
Head Clog Warning
indicator “ ” appears in the viewfinder.
In such cases, use the optional Cleaning Cassette
M-DV2CL. Insert it and play back for approxi-
mately 20 seconds. After this time the camcorder
stops automatically. If the cassette is used more
than once consecutively, damage to the video
heads may result.
If, after using the Cleaning Cassette, the
problems still exist, consult your nearest JVC
dealer.
2. Avoid using the unit . . .
.... in places subject to excessive humidity or
dust.
.... in places subject to soot or steam such as
near a cooking stove.
.... in places subject to excessive shock or
vibration.
About moisture condensation . . .
•You have observed that pouring a cold liquid into
a glass will cause drops of water to form on the
glass‘ outer surface. This same phenomenon
occurs on the head drum of a camcorder when it
is moved from a cool place to a warm place, after
heating a cold room, under extremely humid
conditions or in a place directly subjected to the
cool air from an air conditioner.
.... near a television set.
.... near appliances generating strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
.... in places subject to extremely high (over
40°C) or extremely low (under 0°C) tempera-
tures.
•Moisture on the head drum can cause severe
damage to the video tape, and can lead to internal
damage to the camcorder itself.
3. DO NOT leave the unit . . .
.... in places of over 50°C.
.... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
.... in direct sunlight.
Serious malfunctioning
.... in a closed car in summer.
.... near a heater.
If malfunctioning occurs, stop using the unit
immediately and consult your local JVC dealer.
4. To protect the unit, DO NOT . . .
.... allow it to become wet.
.... drop the unit or strike it against hard objects.
.... subject it to shock or excessive vibration
during transportation.
.... keep the lens directed at extremely bright
objects for long periods.
.... direct the eyepiece of the viewfinder at the
sun.
.... carry it by holding the viewfinder.
.... swing it excessively when using the shoulder
strap.
The camcorder is a microcomputer-controlled
device. External noise and interference (from a
TV, a radio, etc.) might prevent it from
functioning properly. In such cases, first
disconnect its power supply unit (battery pack,
AC Power Adapter/Battery Charger, etc.) and
clock battery; and then re-connect it and
proceed as usual from the beginning.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC
dealer or Technical Service Center.
64
EN
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
1. No power is supplied.
1. •The power is not connected
properly.
1. •Connect the AC Adapter
securely (੬ pg. 7).
•The battery is dead.
•The viewfinder hasn’t been
pulled out.
•Replace the dead battery
with a fully charged one
(੬ pg. 9).
•Pull the viewfinder out.
2. Recording cannot be
2. •The tape’s record safety tab
is set to “SAVE”.
2. •Set the tape’s record safety
tab to “REC” (੬ pg. 12).
•Set the Power Dial to
“REC”.
performed.
•The Power Dial is set to
“PLAY”.
3. There is no picture.
3. •The camcorder is not getting
power, or some other
3. •Turn the camcorder’s power
off and on again.
malfunction exists.
•Pull out the viewfinder to
open the lens cover.
•The lens cover is closed.
4. Some functions are not
4. •The Select Dial is set to
“AUTO”.
4. •Set the Select Dial to any
position except “AUTO”.
•Set the Power Dial to any
position except “5S”.
available.
•The Power Dial is set to “5S”.
5. The focus does not adjust
5. •Focus is set to “MANUAL”.
•The recording was done in a
dark place, or the contrast
was low.
5. •Set Focus to “AUTO”
(੬ pg. 40).
automatically.
•Adjust the diopter
(੬ pg. 13).
•The diopter is not properly
adjusted.
•Clean the lens and check
the focus again.
•The lens is dirty or covered
with condensation.
6. The cassette won’t load
6. •The cassette is in the wrong
position.
6. •Set it in the right position.
•Install a fully charged
battery (੬ pg. 9).
properly.
•The battery’s charge is low.
7. Play, Rewind and
Fast-Forward functions
don’t work.
7. •The Power Dial is not set to
“PLAY”.
7. •Set the Power Dial to
“PLAY” (੬ pg. 46).
•The cassette’s cover is open.
8. The tape is moving, but
8. •Your TV has AV input
terminals, but is not set to
its VIDEO mode.
8. •Set the TV to the mode or
channel appropriate for
video playback.
there’s no picture.
9. When shooting a subject
illuminated by bright
9. •This is a result of
9.
exceedingly high contrast,
and is not a malfunction.
————
light, vertical lines appear.
10. In the 5-Second mode,
recording ends before 5
seconds have elapsed.
10. •The 5-Second mode in the
System Menu is set to
“ANIMATION”.
10. •Select “5S” or “5SD” in the
System Menu
(੬ pgs. 18, 19).
11. Even though “GAIN UP”
11. •Depending on the light source,
the 1/30 shutter speed may be
deactivated in order to reduce
the shakiness in the picture.
11.
was set to “
”, scenes
A
————
shot in dark places are
not brightened.
12. Snapshot mode cannot be
12. •P.AE/Effects Sepia,
Monotone or Slow (Slow
Shutter) are activated.
•The Squeeze mode is
selected.
12. •Disengage them
(੬ pg. 33).
used.
•Disengage the Squeeze
mode (੬ pgs. 16, 17).
•Disengage the Cinema
mode (੬ pgs. 16, 17).
•The Cinema mode is engaged,
disabling the white border.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
65
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
13. Digital Zoom doesn’t
13. •10x optical zoom is selected.
13. •Turn off the Video Echo
effect (੬ pg. 33).
work.
•The Video Echo effect is activated.
•Picture Wipe or Dissolve
are being used in a scene
transition.
•Wait until the Picture Wipe
or Dissolve effects are
completed.
•5-Second recording was
done with the Power Dial
set to “5S”, and with “5SD”
selected in the System Menu.
•Snapshot Dissolve was
attempted during Digital
Zoom.
•Change the setting of either
the System Menu or the
Power Dial (੬ pgs. 18, 19).
•Do not attempt to take a
Snapshot when performing
Digital Zoom (੬ pg. 22).
14. P.AE/Effects and Fade/
14. •The Select Dial is set to
“AUTO”.
14. •Set the Select Dial to
“MANUAL”.
Wipe Effects don’t work.
•The Power Dial is set to
“5S”.
•Change the setting of the
Power Dial.
15. The Black & White Fader
15. •The Sepia or Monotone
15. •Turn off Sepia and
Monotone (੬ pg. 33).
doesn’t work.
effects are activated.
16. The Dissolve function
16. •P.AE/Effects Sepia,
Monotone or Slow are
activated.
16. •Turn off Sepia and
Monotone before adding
Dissolve to a scene
doesn’t work.
•The Squeeze mode is
selected.
transition (੬ pg. 33).
•Make sure that the Squeeze
mode in the Recording
Menu is set to “OFF”.
17. The Picture Wipe and
Dissolve functions don’t
work.
17. •The last selected editing
scene is ending.
17. •Select Picture Wipe or
Dissolve before beginning
recording. The effects are
then automatically
•At the end of the last
selected scene for editing,
the Power Dial was set to
“OFF”.
activated (੬ pg. 30).
•Do not turn off the
camcorder’s power after
setting Edit-In and Edit-Out
points, as they will all be
erased.
•The power is off.
•The previously selected
P.AE/Effect was changed
after the last selected scene
for editing was registered.
•The P.AE/Effects in the
Recording Menu were
exchanged after the last
selected scene for editing
was registered.
•The camcorder
automatically shuts off
after 5 minutes have
elapsed in the RECORD/
STANDBY mode. Make
sure you continue
operations within
5 minutes after engaging
RECORD/STANDBY.
•Make sure you have
selected the P.AE/Effects
you want before starting
editing.
•Exchanging P.AE/Effects
may deactivate the effect(s)
you selected. Once you’ve
selected an effect, do not
perform an exchange
before beginning editing. If
you do, make sure you
don’t replace the effect(s)
you selected.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING (Cont.)
66
EN
SYMPTOM
POSSIBLE CAUSES
CORRECTIVE ACTION
18. The Picture Wipe function
18. •The Slow (Slow Shutter)
18. •Make sure the Squeeze
mode, Cinema mode, or
Slow effect is not activated
when preparing to use the
Picture Wipe function.
doesn’t work.
effect is activated.
•The Squeeze or Cinema
mode is selected in the
Recording Menu.
19. Even when Slow (Slow
Shutter) isn't selected, the
image looks like it is
activated.
19. •When shooting in the dark
19. •If you want the lighting to
look more natural, set
with GAIN UP set to
, the
A
unit becomes highly sensitive
to light and the image takes
on an effect similar to Slow
(Slow Shutter).
GAIN UP to "AGC" or
"OFF" in the Recording
Menu (੬ pgs. 16, 17).
20. The Video Echo effect
20. •The Picture Wipe or
Dissolve functions are in use.
•The Squeeze mode is
selected in the Recording
Menu.
20. •Make sure the Squeeze
mode is set to “OFF”
(੬ pg. 16, 17).
doesn’t work.
•Do not try to use the Video
Echo effect during a
•Snapshot Dissolve is in
progress.
Fade-In or Fade-Out.
•A Fade-In or Fade-Out is in
progress (White Fader, Black
Fader or Black & White
Fader).
21. There is no strobe when
the Classic Film and
Strobe effects are
activated.
21. •The Picture Wipe or
Dissolve functions are in
use.
21. •Do not try to use the
Classic Film or Strobe
effects during a scene
transition (੬ pg. 30).
•Snapshot Dissolve is in
progress.
22. White Balance cannot be
22. •The Sepia or Monotone
effects are activated.
•Snapshot Dissolve is in
progress.
22. •Turn off Sepia or Monotone
before setting White
activated.
Balance (੬ pg. 30).
•Wait until the Snapshot
Dissolve is finished before
setting White Balance.
23. The viewfinder indica-
23. •Certain FADE/WIPE, P.AE/
Effects and other functions
that cannot be used together
are selected at the same
time.
23. •Re-read the sections
covering FADE/WIPE and
P.AE/Effects
tions blink.
(੬ pg. 28, 33).
24. There are disturbances in
24. •If Audio Dubbing or Insert
Editing have been performed
repeatedly on the same
portion of the tape,
24. •Use a new, or infrequently
used, tape for Audio
audio and video.
Dubbing and Insert Editing.
disturbance to the sound
and picture may result.
25. An unusual mark appears
25.
25. •Check the section of the
manual that explains
viewfinder indications
(੬ pg. 60).
in the viewfinder.
————
26. An error indication
(E01 — E07) appears in
the viewfinder.
26. •A malfunction of some kind
has occurred. In this case
the camcorder’s functions
become unusable.
26. •Remove the tape or the
battery pack, and wait a
few minutes for the
indication to clear. When it
does, you can resume using
the camcorder.
If the indication remains,
please consult your nearest
JVC dealer or Technical
Service Center.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
EN
67
M
N
O
Animation ................................................ ੬ pg. 19
Audio Dubbing ........................................ ੬ pg. 56
Auto Focus .............................................. ੬ pg. 40
B
Battery ....................................................... ੬ pg. 8
Battery Low ............................................. ੬ pg. 59
On-Screen Menus.................................... ੬ pg. 27
P
P.AE/Effects .............................................. ੬ pg. 33
Playback On TV ...................................... ੬ pg. 42
Power (AC/Battery) ............................... ੬ pgs. 7, 8
Q
C
Charging .................................................... ੬ pg. 8
Charging While Docked .......................... ੬ pg. 41
Cleaning The Camcorder ......................... ੬ pg. 58
Connections ..................................... ੬ pgs. 41, 42
R
Random Assemble Editing ....................... ੬ pg. 51
Record/Standby ....................................... ੬ pg. 20
Recording Format ...................................... ੬ pg. 4
Remote Control ....................................... ੬ pg. 14
D
Date/Time Display ................................... ੬ pg. 27
Date/Time Settings ................................... ੬ pg. 11
Digital Zoom ........................................... ੬ pg. 17
Diopter Adjustment ................................. ੬ pg. 13
Docking Station ....................................... ੬ pg. 41
Dubbing .................................................. ੬ pg. 49
S
Self-Timer ................................................ ੬ pg. 25
Set VCR Brand ......................................... ੬ pg. 50
Shooting Posture ...................................... ੬ pg. 21
Slow Motion Playback ............................. ੬ pg. 42
Snapshot Mode ........................................ ੬ pg. 22
Snapshot Search ...................................... ੬ pg. 22
Sound ...................................................... ੬ pg. 19
Stabilizer.................................................. ੬ pg. 17
Strobe ...................................................... ੬ pg. 34
E
Editing ..................................................... ੬ pg. 49
Erase protection ....................................... ੬ pg. 12
Exposure Control ..................................... ੬ pg. 36
F
5SD .........................................................੬ pg. 24
5-Second Mode ....................................... ੬ pg. 24
Fade-In/Out ............................................. ੬ pg. 29
Focus Adjustment .................................... ੬ pg. 40
T
Tapes ....................................................... ੬ pg. 12
Time Code ........................................... ੬ pg. 4, 26
U
V
G
H
I
Viewfinder Indications ............................. ੬ pg. 60
W
Insert Editing ............................................ ੬ pg. 57
Iris ........................................................... ੬ pg. 37
Iris Lock ................................................... ੬ pg. 37
White Balance ......................................... ੬ pg. 38
Wide........................................................ ੬ pg. 17
Wipe In/Out ............................................. ੬ pg. 29
J
K
L
Lithium Battery .......................................... ੬ pg. 2
Loading A Tape ........................................ ੬ pg. 12
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
68
EN
MAIN UNIT
General
Power
: DC 6 V
DC 3.6 V
: 6.2 W
: DV Format (SD mode)
: PAL Standard
(using AC Adapter),
(using Battery)
Power consumption
Format
Signal format
Video signal recording format
Data compression rate
Digital compression technology
: Digital Component Recording
: 25 Mbps
: DCT (Discrete Cosine Transform) &
VLC (Variable Length Coding)
: MINI DV Cassette
Cassette
Tape Speed
: 18.8 mm/sec.
Maximum recording time
Continuous recoring time
: 60 min. (using DVM-60 cassette)
: Approx. 30 min.
(using fully charged BN-V712U
Battery Pack)
Fast-Forward/Rewind Time
Pickup
: Approx. 90 sec. (using DVM-60 cassette)
: 1/3" CCD
Zoom
: 10x Optical Zoom 20x/100x Digital Zoom
: F1.6, f = 4.5`45 mm
ø27
: Electronic 0.55" colour LCD
: AUTO/MAN.
Lens diameter
(Filter Diameter)
Viewfinder
White balance
Iris
: AUTO/LOCK
Microphone
: Condensor type/stereo
: 0 — 40°C
: 35 — 80%
Operating temperature
Operating humidity
Storage temperature
Dimensions
Weight
During recording
: –20 — 50°C
: 43 (W) x 148 (H) x 88 (D) mm
: Main unit approx. 450 g
Approx. 520 g (With BN-V712U Battery Pack,
Cassette M-DVM30ME, Hand Strap)
Audio
Sampling frequencies
Channels
: 48 kHz, 44.1 kHz (playback), 32 kHz
: 2 (48 kHz)
4 (32 kHz)
Quantum Bits
: 16 linear (48 kHz)
12 non-linear (32 kHz)
Connectors
Microphone input connector
A/V output connector
DC input connector
Multi connector
: ø3.5 mm –62 dB stereo
: ø3.5 mm 4 quadripolar (analog output)
: 6 V
: 34 pin
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
69
BATTERY PACK BN-V712U
Power
: DC 3.6 V
/1250mAh
: 20 mm (W) x 20 mm (H) x 71 mm (D)
: Approx. 50 g
Dimensions
Weight
REMOTE CONTROL UNIT RM-V708U
Power
: DC 3 V
(Lithium Battery CR2025)
Battery Life
: Approx. 1 year (depending on usage)
: Approx. 5 m (front shaft)
: 0°C — 40°C
: –20°C — 50°C
: 54 mm (W) x 86 mm (H) x 12 mm (D)
: Approx. 26 g (with battery installed)
Effective distance
Operating temperature
Storage temperature
Dimensions
Weight
AC ADAPTER/CHARGER AA-V70EG
Power
: AC 110 – 240 V`, 50/60 Hz
Power consumption
Output power
: 15 W
: DC 3.6 V
: DC 6.0 V
, 1.3 A (charge)
, 1.1 A (VTR)
Operating temperature
Dimensions
Weight
: 0°C — 40°C (when charging, 10°C — 35°C)
: 112 mm (W) x 44 mm (H) x 63 mm (D)
: Approx. 185 g
DOCKING STATION
Operating temperature
Editing connector
S-Video connectors
Y
: 0°C — 40°C (when charging, 10°C — 35°C)
: ø3.5 mm
: 1 Vp-p, 75 Ω
: 0.3 Vp-p, 75 Ω
C
Video output connector
Audio output connector
JLIP connector
Multi connector
Dimensions
: 1 Vp-p, 75 Ω (Pin jack)
: –8dBs, 1 k Ω (Pin jack)
: ø3.5 mm
: 34-pin
: 112 mm (W) x 48 mm (H) x 203 mm (D)
: Approx. 345 g
Weight
* E. & O. E. Design and specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
VICTOR COMPANY OF JAPAN, LIMITED
0P5ri9n6teMdSinV*JaUpNan*SN
EG
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYRIGHT© 1996 VICTOR COMPANY OF JAPAN, LTD.
|