JVC CRT Television LCT1445 001A User Manual

ENGLISH  
PD-42DV2  
PDP COLOUR TELEVISION  
INSTRUCTIONS  
1
LCT1445-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for buying this JVC colour television.  
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.  
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE.  
WARNING  
Always use the power cords which are supplied with the TV and receiver.  
Some power cords are supplied with this TV. Use the power cord which best suits the area in which you live, and insert it into a correctly  
earthed outlet.  
Failure to use the supplied power cord or to insert it into a correctly earthed outlet may result in electric shocks.  
WARNING FOR TABLE TOP STAND:  
To ensure safety in an emergency such as an earthquake, and to prevent accidents, ensure that measures are taken to prevent the TV  
dropping or falling over.  
• Use the supplied screws to firmly attach the supplied hooks to the back of the TV, and use commercially available cord to fix the TV  
to rigid components such as walls and columns.  
Supplied hooks  
CAUTION:  
• Operate only from the power source specified (AC 110 – 240 V, • When you are not using this unit for a long period of time, it is  
50/60 Hz) on the unit.  
recommended that you disconnect the power cord from the  
• Avoid damaging the AC plug and power cord.  
main outlet.  
• The ambient temperature for using this unit is 0° to 40°C (32°  
to 104°F). Using the unit outside of this range may lead to it not  
working correctly or being broken.  
Distance recommendations  
Avoid improper installation and never position the unit where good  
ventilation is impossible.  
200 mm  
200 mm  
150 mm  
150 mm  
When installing this TV, distance recommendations must be maintained  
between the set and the wall, as well as inside a tightly enclosed area or  
piece of furniture.  
50 mm  
Keep to the minimum distance guidelines shown for safe operation.  
50 mm  
100 mm  
100 mm  
100 mm  
100 mm  
100 mm  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Burn-in  
A characteristic of Plasma Display Panels (PDPs) is that displaying the same image for a long time causes a part of the image to stay  
on the screen (this is called phosphor burn-in).  
Avoid burn-in as follows.  
Use the PICTURE SHIFT function. In order to prevent burn-in, the picture displayed on the screen is shifted up,  
down and to the left and right at regular intervals. Refer to page 28 for details.  
• Even if the PICTURE SHIFT function is turned off, the picture may shift to the left or right when the channel or input is changed.  
The PICTURE MODE function is initially set to BRIGHT. Unless the TV is being watched in an extremely bright  
room, it is recommended to change the PICTURE MODE setting to either STANDARD or SOFT. Doing so will  
reduce the chance of PDP burn-in and extend the life of the PDP. See “PICTURE MODE” on page 21.  
Do not display static images or characters for long periods of time.  
While an image is displayed  
With power OFF  
19:03  
19:03  
Burn-in example  
• Reduce CONTRAST and BRIGHT on the PICTURE SETTING menu (page 21) when viewing.  
Do not view for long periods of time in the REGULAR mode (page 15).  
Screen size is normally chosen to ensure that the picture is displayed on the entire screen. After viewing in the REGULAR mode in  
which black bands may occur at the left and right of the screen, it is recommended to change to the PANORAMIC mode to display  
the picture on the entire screen.  
While an image is displayed  
With power OFF  
Burn-in example  
Do not view for long periods of time using the PIP function (page 16) or MULTI-PICTURE function (page 17).  
If Burn-in has occurred  
If burn-in occurs, try the REFRESH function (page 28). If burn-in is minimal it may gradually become less noticeable.  
Note:Once burn-in occurs it will never disappear completely.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Point defects  
PDPs use collections of fine pixels to display images. While there is no problem with more than 99.99% of these pixels, please  
understand that a very small number of pixels may not light or may light all the time.  
Do not install the TV near electronic equipment that is susceptible to electromagnetic waves  
It may cause interference in images, sound, etc. In particular, keep video equipment away from this product.  
Effect on infrared devices  
There may be interference while using infrared devices such as infrared cordless headphones.  
Failure to take the following precautions may cause damage to the television or remote control.  
DO NOT block the TV’s ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)  
DO NOT place anything on top of the TV.  
(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)  
DO NOT allow objects or liquid into the cabinet openings.  
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)  
DO NOT place any naked flame sources, such as lighted candles, on the TV.  
The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.  
Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully.  
Never use any cleaner or detergent on it.  
As both sides of speaker panel can be easily scratched, cleaning should be done  
carefully. If the speaker panel is dirty, please wipe with a soft cleaning cloth  
(such as the cloth used to clean a compact disc).  
Speaker panels  
If there is a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.  
D.I.S.T. demonstration  
To start the D.I.S.T. demonstration:  
Press the a button to display the MENU (main menu). Then press the yellow button.  
A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen.  
To quit the D.I.S.T. demonstration:  
Press the yellow button, b button, P p buttons or any of the number buttons.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Checking contents of packages............5  
Setting up your TV..................................6  
PICTURE FEATURES...........................22  
DIGITAL VNR.................................................. 22  
Super DigiPure................................................ 22  
COLOUR SYSTEM......................................... 23  
PULL DOWN................................................... 23  
4:3 AUTO ASPECT......................................... 23  
COLOUR MANAGEMENT.............................. 23  
PIP .................................................................. 23  
Installation..........................................................6  
Putting the batteries into the Remote control.....6  
Connections............................................7  
Connection diagram...........................................7  
Connecting the TV and receiver ........................8  
Connecting the aerial and VCR .........................8  
Connecting the power cord to the AC outlet ......9  
SOUND SETTING .................................24  
STEREO / I • II ................................................ 24  
Sound Adjustment........................................... 24  
SPEAKER ....................................................... 24  
BBE................................................................. 24  
CINEMA SURROUND .................................... 24  
A.H.B. (Active Hyper Bass)............................. 24  
HEADPHONE ................................................. 25  
Initial settings .......................................10  
TV buttons and functions ....................12  
Turn the TV on from standby mode .................12  
Choose a TV channel ......................................12  
Watch images from external devices...............12  
Adjust the volume ............................................12  
Using the headphone.......................................12  
Using the Menu................................................12  
VIDEO SETTING ...................................26  
ID LIST............................................................ 26  
Remote control buttons and  
FEATURES............................................27  
functions............................................13  
SLEEP TIMER ................................................ 27  
BLUE BACK.................................................... 27  
CHANNEL GUARD......................................... 27  
REFRESH....................................................... 28  
PICTURE SHIFT............................................. 28  
Turn the TV on or off from standby mode........13  
Choose a TV channel ......................................13  
Adjust the volume ............................................14  
Watch images from external devices...............14  
ZOOM function.................................................15  
CINEMA SURROUND function........................15  
Displaying the current time ..............................16  
Return to TV channel instantly.........................16  
Using the FREEZE function.............................16  
Using the PIP function .....................................16  
Using the MULTI-PICTURE function ...............17  
Operating a JVC brand VCR or DVD player ......17  
INSTALL................................................29  
LANGUAGE .................................................... 29  
AUTO PROGRAM........................................... 29  
EDIT/MANUAL................................................ 29  
Changing the TELETEXT LANGUAGE setting... 32  
Additional preparation.........................33  
Connecting the external devices..................... 33  
Teletext function...................................18  
CH/CC numbers ...................................35  
Troubleshooting...................................36  
Specifications.......................................38  
Basic operation ................................................18  
Using the List Mode .........................................18  
Hold..................................................................18  
Sub-page .........................................................19  
Reveal..............................................................19  
Size..................................................................19  
Index ................................................................19  
Cancel..............................................................19  
Using the TV’s menu............................20  
Basic operation ................................................20  
PICTURE SETTING ...............................21  
PICTURE MODE .............................................21  
Picture Adjustment...........................................21  
WHITE BALANCE............................................21  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking contents of packages  
Check that all components are present. Contact your retailer immediately if any components are missing.  
Receiver  
TV  
AA/R6-size batteries  
(used to check operation)  
Remote control  
System cable  
Mounting screw × 2  
Hook × 2  
Power cord  
• The power cord from those below which is suitable to the area in which you live will be included with your TV.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV  
Ensure to lift up the TV with more than 2 people. TV is too heavy to lift up by yourself and TV fall causes  
injuries and damage.  
Installation  
Depending on the model, the TV may come with a Wall Mounting Unit or Table Top Stand. In these  
cases, a separate instruction manual is provided in addition to this manual. Read that instruction  
manual and install the TV correctly.  
• For models which are supplied without a Wall Mounting Unit or Table Top Stand, and for when using another unit to install the TV,  
only use JVC units which were designed for this TV.  
WARNING FOR WALL MOUNTING UNIT:  
• Consult authorized service personnel for the installation of your TV in order to prevent accidents. Do not try to install your TV by  
yourself.  
• We are selling this product with the understanding that it will be assembled and installed by qualified service personnel.  
• Please read the instruction manual of Wall Mounting Unit before starting installation in order to prevent accidents.  
• We are not liable for any damage caused by faulty assembly, faulty wall mounting, insecure wall mounting, misuse, alterations, or  
natural disasters.  
Cautions for installation  
• Do not tilt the TV towards the left or right, or towards the back.  
• Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.  
• The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow  
satisfactory cooling. See “Distance recommendations” on page 1.  
Putting the batteries into the Remote control  
Use two AA/R6 dry cell batteries.  
Insert the batteries from the - end, making sure the + and - polarities are correct.  
• Follow the warnings printed on the batteries.  
• Battery life is about six months to one year, depending on your frequency of use.  
• The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.  
• If the remote control does not work properly, replace the batteries.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Caution  
• Turn off all equipment (including the TV) before connecting anything.  
Connection diagram  
TV (back)  
DISPLAY INPUT  
CONNECT TO SYSTEM CABLE  
AC INPUT  
110-240V  
Supplied system cable  
Cable supplied with TV  
• Refer to page 9 for connection  
details.  
Connecting antenna and other equipment  
• Refer to page 8 for connection details.  
IN  
OUT  
AUDIO  
AUDIO  
R
VIDEO S-VIDEO  
VIDEO  
DISPLAY OUT  
L/MONO  
R
L
VIDEO-1  
VIDEO-2  
L
R
R
L
L
COMPONENT(VIDEO-4)  
R
AUDIO  
OUT  
Pr  
Pb  
Y
R-AUDIO-L  
VIDEO-3  
AC IN  
110 240V  
-
Cable supplied with receiver  
• Refer to page 9 for connection details.  
Receiver (back)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
If connecting a VCR (see fig.B):  
Connecting the TV and receiver  
1 Connect the aerial cable to the aerial input  
socket on the VCR, and connect the VCR and  
receiver with another aerial cable  
Use the supplied system cable to connect the TV to the  
receiver.  
The two connectors are of different shapes.  
Ensure that the pins on connector 1 are oriented correctly,  
press the connector into the socket, and tighten the screws at  
left and right to lock it in place.  
2 Connect the VCR’s VIDEO OUT (video output)  
terminal and the receiver’s VIDEO terminal with  
a video cable  
To connect a VCR to the receiver with an S-VIDEO  
cable:  
Press connector 2 firmly into place until it is locked.  
Connect the VCR’s S-VIDEO OUT (S-VIDEO output)  
terminal and receiver’s S-VIDEO terminal with an  
S-VIDEO cable A, instead of connecting with a video  
cable.  
Note that the connection with a video cable will be  
ignored in case you connect a VCR to the receiver with  
both video cable and S-VIDEO cable.  
3 Connect the VCR’s VIDEO OUT (audio L/R  
output) terminals and the receiver’s AUDIO  
terminals (L/MONO and R) with an audio cable  
2
1
• If the VCR’s audio output is in mono, connect the  
VCR’s AUDIO OUT (audio output) terminal and the  
receiver’s AUDIO L/MONO terminal with an audio  
cable.  
• To connect additional external devices, please see  
“Connecting the external devices” on page 33.  
Disconnecting the system cable  
Release connector 1 by unscrewing the screws at left and  
right and removing it from the socket.  
Release connector 2 by removing it from the socket while  
pressing the release bottoms on either side.  
Fig.B  
Back of the receiver  
IN  
AUDIO  
O
VIDEO S-VIDEO  
AUDIO  
R
L/MONO  
R
1
VIDEO-1  
VIDEO-2  
2
R
R
L
L
COMPONENT  
Pr  
P
R-AUDIO-L  
VIDEO-3  
Connecting the aerial and VCR  
A
1
• Aerial cable is not supplied. Use a good quality 75-ohm  
coaxial cable.  
3
2
• Read the manual that came with the VCR before  
connecting.  
If not connecting a VCR (see fig.A):  
Connect an aerial cable to the aerial socket on this  
receiver.  
1
Fig.A  
Back of the receiver  
A
R
VIDEO-1  
R
VIDEO-2  
R
VIDEO-3  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Connecting the power cord to the AC  
outlet  
Insert the AC plugs on the power cords from the TV and  
receiver into AC outlets.  
Caution  
• Operate only from the power source specified (AC 110  
– 240 V, 50/60 Hz) on the unit.  
• Failure to use the supplied power cord or to insert it  
into a correctly earthed outlet may result in electric  
shocks.  
Use the supplied power cord which best suits the area in  
which you live.  
Back of the TV  
Power cord  
AC INLET  
AC INLET  
AC110-240V  
Power cord  
Back of the receiver  
Insert the AC plug into a correctly earthed outlet.  
The receiver power lamp lights red, and the receiver is in  
the standby mode, when the AC plug on the power cord is  
connected to an AC outlet.  
• Remove the AC plug from the outlet to completely  
disconnect the TV from the power supply.  
Receiver rear  
IN  
AUDIO  
OUT  
AUDIO  
VIDEO S-VIDEO  
VIDEO  
DISPLAY OUT  
R
R
R
L/MONO  
R
L
VIDEO-1  
VIDEO-2  
L
L
L
COMPONENT(VIDEO-4)  
R
AUDIO  
OUT  
Pr  
Pb  
Y
R-AUDIO-L  
VIDEO-3  
AC IN  
110 240V  
-
1 Aerial socket (page 8)  
2 VIDEO terminals (pages 8, 26, 33)  
VIDEO-1 terminal, VIDEO-2 terminal, VIDEO-3  
terminal, COMPONENT (VIDEO-4) terminal  
3 OUT terminal (page 34)  
4 AUDIO OUT terminal (page 34)  
5 DISPLAY OUT terminal (page 8)  
6 AC INLET (page 9)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
When the TV is first turned on, it enters the initial setting  
mode, and the JVC logo is displayed. Follow the  
instructions on the on-screen display to make the initial  
settings.  
• If the power lamp stays red and does not change to  
green:  
Your TV is in the standby mode. Press the #  
(Standby) button again to turn your TV on.  
• The JVC logo does not appear when your TV has  
been turned on once. In this case, use the  
“LANGUAGE” and “AUTO PROGRAM” functions  
to make the initial settings. For details, see  
“INSTALL” on page 29.  
VCR/TV/DVD  
Switch  
3 Press the a button  
Yellow button  
Blue button  
The LANGUAGE menu appears.  
LANGUAGE  
BACK  
TV  
OK  
D0002(E)-EN  
4 Press the 5 and 6 buttons to choose  
ENGLISH. Then press the a button  
English is set for the on-screen display description. The  
TELETEXT LANGUAGE menu appears as a sub-menu  
of the AUTO PROGRAM function.  
TELETEXT LANGUAGE  
GROUP-1  
GROUP-2  
GROUP-3  
GROUP-4  
1 Make sure to set the VCR/TV/DVD switch to the  
TV position.  
BACK  
• You cannot turn the TV on when the VCR/TV/DVD  
switch is set to the VCR or DVD position.  
TV  
OK  
D1003-EN  
2 Press the # button on the remote control  
The receiver power lamp changes from red to green.  
After a short interval the TV power lamp lights green  
and the JVC logo is displayed.  
5 Press the 6 buttons to choose the teletext  
language group that corresponds to language  
of teletext programme that you want to watch  
• Check that the AC plugs on the power cords from the  
TV and receiver are connected to AC outlets.  
Group  
Languages  
TV (front)  
GROUP-1 Turkish, Hungarian, English, German,  
French, Italian, Spanish, Portuguese,  
Greek, Swedish, Finnish  
GROUP-2 Polish, Serbian, Croatian, Slovenian,  
Czech, Slovak, Rumanian, Hungarian,  
German, French, Italian, Swedish,  
Finnish  
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,  
Estonian, Ukrainian, Serbian, Croatian,  
Slovenian, Czech, Slovak, English,  
German  
GROUP-4 Arabic, Czech, Slovak. Hungarian,  
English, German, French, Italian,  
Remote control  
sensor  
Power lamp  
Spanish, Portuguese, Swedish, Finnish  
Receiver (front)  
A button  
Power lamp  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
6 Press the blue button to start the AUTO  
PROGRAM function  
The AUTO PROGRAM menu appears and received TV  
channels are automatically registered in the Programme  
numbers (PR).  
• To cancel the AUTO PROGRAM function:  
Press the b button.  
AUTO PROGRAM  
EDIT  
PR  
ID  
CH / CC  
CH 10  
20%  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
01  
02  
03  
BACK  
OK  
TV  
ID  
BACK  
OK  
MOVE  
TV  
INSERT  
DELETE  
MANUAL  
D0004-EN  
After the TV channels have been registered in  
the Programme numbers (PR), the EDIT menu  
appears  
• You can proceed to edit the Programme numbers  
(PR) using the EDIT/MANUAL function. For details,  
see “EDIT/MANUAL” on page 29.  
• If you do not need to use the EDIT/MANUAL  
function, go to the next step.  
7 Press the a button  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV buttons and functions  
TV (front)  
Receiver (front)  
How to open the cover  
S
VIDEO  
AUDIO  
L
R
IN(VIDEO-5)  
Refer to the pages in parentheses for details.  
1 Headphone jack (mini jack) (page 33)  
2 VIDEO-5 terminal (pages 26, 33)  
3 A (Stand by) button (page 12)  
4 Power lamp (page 10)  
Turn the TV on from standby mode  
TV (back)  
Press the A button or P p buttons to turn the TV  
on from standby mode  
• Check that the AC plugs on the power cords from the TV  
and receiver are connected to correctly AC outlets.  
Choose a TV channel  
Press the P p buttons to choose a programme  
number (PR) or a VIDEO terminal  
Watch images from external devices  
Press the TV/AV button to choose a VIDEO  
terminal  
TV mode  
VIDEO modes  
Last  
Programme  
number  
or  
or  
or  
Refer to the pages in parentheses for details.  
1 Remote control sensor  
2 Power lamp (page 10)  
3 MENU/OK button (pages 12, 20)  
4 TV/AV button (page 12)  
• The leading character is changed from V to S (e.g. V2 is  
changed to S2) when VIDEO-2, VIDEO-3, or VIDEO-5  
are connected to the S terminal.  
5 r (Volume) q buttons (page 12)  
6 P p buttons (page 12)  
7 A (Stand by) button (page 12)  
Adjust the volume  
Press the q buttons  
The volume level indicator appears.  
Using the headphone  
• The headphone volume is adjusted with the  
“HEADPHONE” menu (see page 25).  
Using the Menu  
Use the MENU/OK button.  
Refer to“Using the TV’s menu” (see page 20) for details of  
using the menu.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and functions  
1 Muting button  
2 Number buttons  
3 Information button  
4 c button  
5 3 sound button  
6 b button  
7 5 buttons  
8 g (Text) button  
9 p p buttons  
0 VCR/DVD/Teletext control buttons  
- p buttons  
= Standby button  
~ VCR/TV/DVD switch  
! R button  
@ Colour buttons  
# a button  
$ D button  
% 6 buttons  
^ f button  
& r q buttons  
* X button  
( g button  
Turn the TV on or off from standby  
mode  
1 Make sure to set the VCR/TV/DVD switch to the  
TV position.  
• You cannot turn the TV on or off when the VCR/TV/  
DVD switch is set to the VCR or DVD position.  
2 Press the # (Standby) button to turn the TV on  
or off.  
When the TV is turned on, the power lamp changes from  
red to green.  
• The power can be turned on by pressing the b  
button, p p buttons or Number buttons.  
• Check that the AC plugs on the power cords from the  
TV and receiver are connected to AC outlets.  
Choose a TV channel  
Use the number buttons:  
Enter the programme number (PR) of the  
channel using the number buttons.  
Example:  
• PR 6 press 6  
• PR 12 press 1 and 2  
Use the p p buttons:  
Press the p p buttons to choose the  
programme number (PR) you want.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and functions  
Use the PR LIST:  
Watch images from external devices  
1 Press the  
PR LIST  
(Information) button to display the  
h
h
Use the o button:  
Press the o button to choose a VIDEO  
terminal.  
Pressing the  
as follows:  
(Information) button changes the display  
TV mode  
VIDEO modes  
PR LIST  
PR  
ID  
Programme  
numbers  
PR 1 – PR 99  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
12 : 00  
or  
or  
No indication  
TV  
-10  
OK  
+10  
or  
D0011-EN  
• The leading character is changed from V to S (eg V2 is  
changed to S2) when VIDEO-2, VIDEO-3, or VIDEO-5  
are connected to the S terminal.  
2 Press the 5 and 6 buttons to choose a  
Programme number (PR). Then press the a  
button  
Use the p p buttons:  
Press the p p buttons to choose a VIDEO  
terminal.  
• For Programme numbers (PR) with the CHANNEL  
GUARD function set, the n (CHANNEL GUARD)  
mark is displayed next to the Programme number  
(PR) in the PR LIST.  
• You cannot use the 6 buttons to choose a  
Programme number (PR) with the CHANNEL  
GUARD function set.  
Use the PR LIST:  
1 Press the  
PR LIST  
(Information) button to display the  
h
• Even if you try to choose a Programme number (PR)  
with the CHANNEL GUARD function set, the n  
(CHANNEL GUARD) mark will appear, and you  
cannot watch the TV channel. To watch the TV  
channel, see “CHANNEL GUARD” on page 27.  
2 Press the 5 and 6 buttons to choose a  
VIDEO terminal. Then press the a button  
• The VIDEO terminals are registered after the  
Programme number PR 99.  
• If you do not have a clear picture or no colour  
appears, change the colour system manually. See  
“COLOUR SYSTEM” on page 23.  
• If you do not have a clear picture or no colour  
appears, follow the operation procedure “COLOUR  
SYSTEM” (see page 23).  
• The sound system is chosen automatically. However,  
if you cannot hear the sound normally even when the  
picture appears normally, choose the sound system  
manually. Refer to the MANUAL on the “INSTALL”  
menu (see page 29) for details of choosing the sound  
system.  
To return to a TV channel:  
Press the b button or the Number buttons.  
To use the Programme number PR 0 (AV):  
When the TV and VCR are connected only by the Aerial  
cable, choosing the Programme number PR 0 (AV) allows  
you to view images from the VCR. Set the VCR RF channel  
to the Programme number PR 0 (AV) manually. For details,  
see “EDIT/MANUAL” on page 29.  
Pressing the o button changes the choice as follows:  
Adjust the volume  
VIDEO modes  
TV mode  
Press the r q buttons to adjust the volume.  
The Volume indicator appears and the volume changes as  
you press the r q buttons.  
PR 0  
Programme  
numbers  
PR 1 – PR 99  
or  
• The headphone volume is adjusted with the  
“HEADPHONE” menu (see page 25).  
or  
Muting the sound  
Press the (muting) button to turn off the  
l
or  
sound.  
Pressing the (muting) button again restores the previous  
l
• The VCR RF channel is sent as the RF signal from the  
VCR.  
volume level.  
• Also refer to your VCR instruction manual.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and functions  
Choose the ZOOM mode  
ZOOM function  
1 Press the c button to display the ZOOM  
You can change the screen size according to the picture  
aspect ratio. Choose the optimum one from the following  
ZOOM modes.  
menu  
ZOOM  
AUTO  
REGULAR  
PANORAMIC  
14:9 ZOOM  
16:9 ZOOM  
16:9 ZOOM SUBTITLE  
FULL  
AUTO:  
When a WSS (Wide Screen Signalling) signal, which shows  
the aspect ratio of the picture, is included in the broadcast  
signal or the signal from an external device, the TV  
automatically changes the ZOOM mode to 16:9 ZOOM  
mode or FULL mode according to the WSS signal.  
If a WSS signal is not included, the picture is displayed in  
accordance with the ZOOM mode set with the 4:3 AUTO  
ASPECT function.  
• For details of the 4:3 AUTO ASPECT function, see “4:3  
AUTO ASPECT” on page 23.  
• When the AUTO (WSS) mode does not function  
correctly due to poor WSS signal quality or when you  
want to change the ZOOM mode, press the c  
button and change to another ZOOM mode.  
BACK  
OK  
TV  
D0009-EN  
• The c button does not work in the twin  
pictures mode.  
2 Press the 6 buttons to choose a ZOOM mode.  
Then press the a button  
The picture expands and the chosen ZOOM mode is  
displayed in about 5 seconds.  
Adjusting the visible area of the picture  
If subtitles or the top (or bottom) of the picture are cut off,  
adjust the visible area of the picture manually.  
REGULAR:  
Use to view a normal picture (4:3 aspect ratio) as its  
original size is.  
1 Press the c button  
The ZOOM menu appears.  
2 Press the a button to display the ZOOM mode  
indication  
Indicator is displayed.  
PANORAMIC:  
This mode stretches the left and right sides of a normal  
picture (4:3 Aspect Ratio) to fill the screen, without making  
the picture appear unnatural.  
3 While it is displayed, press the 6 buttons to  
adjust the visible area vertically  
• You cannot adjust the visible area in REGULAR or  
FULL mode.  
• The top and bottom of the picture are slightly cut off.  
14:9 ZOOM:  
This mode zooms up the Wide Picture (14:9 Aspect Ratio)  
to the upper and lower limits of the screen.  
CINEMA SURROUND function  
You can enjoy sounds with a wider ambience.  
Press the 3 button to turn the CINEMA  
SURROUND function on or off  
• The CINEMA SURROUND function does not work  
properly with mono sound.  
16:9 ZOOM:  
This mode zooms up the Wide Picture (16:9 Aspect Ratio)  
to the full screen.  
• The CINEMA SURROUND function can be also turned  
on or off by using the SOUND SETTING menu. For  
details, see “CINEMA SURROUND” on page 24.  
16:9 ZOOM SUBTITLE:  
This mode zooms up the Wide Picture (16:9 Aspect Ratio)  
with subtitles to the full screen.  
FULL:  
This mode uniformly stretches the left and right sides of a  
normal picture (4:3 aspect ratio) to fill the wide TV screen.  
Use for pictures with a 16:9 aspect ratio that have been  
squeezed into a normal picture (4:3 aspect ratio), you can  
restore their original dimensions.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and functions  
Displaying the current time  
Using the PIP function  
You can display the Current Time on the screen.  
You can view two pictures (Main-picture and sub-picture).  
A TV programme and a video programme from an external  
device can be watched at the same time.  
Press the  
(Information) button to display the  
h
current time  
1 Press the R button  
Pressing the  
follows:  
(Information) button changes the display as  
h
Pressing the R button changes the PIP mode as follows:  
Twin pictures mode  
PR LIST  
PR  
ID  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
12 : 00  
Main-  
picture  
Sub-  
picture  
No indication  
TV  
-10  
OK  
+10  
Picture in picture mode  
D0011-EN  
• This TV uses teletext data to set the current time. If the  
TV has not received a TV channel that has teletext  
programmes since it was turned on, the time display is  
blank. To view the current time, choose a TV channel  
that has teletext programmes.  
Main-  
picture  
Sub-  
picture  
• When watching videos, an incorrect current time is  
sometimes displayed.  
Cancel the PIP function  
Main-  
picture  
Return to TV channel instantly  
You can return to a TV channel instantly.  
D0057  
Press the b button  
The TV returns to the TV mode and a TV channel appears.  
2 Press the p buttons to change the sub-  
picture to the picture from another TV channel  
or another VIDEO terminal  
Using the FREEZE function  
You can view the current programme as a still picture.  
Listening to the sound of the sub-picture:  
You can listen to the sound of the sub-picture with the  
headphones while listening to the sound of the main-  
picture from the TV speakers.  
1 Press the f button  
The still picture of the current picture will appear.  
For details, see “HEADPHONE” on page 25.  
• The sub-picture sound is monaural.  
current  
programme  
still picture  
Changing the position of the sub-picture:  
You can choose one of four positions.  
For details, see “PIP” on page 23.  
D0056  
To cancel the FREEZE function:  
Press the f button, the p p buttons or the number  
buttons.  
Swapping the main-picture and sub-picture:  
Press the g button.  
The main-picture and sub-picture will be swapped.  
• The FREEZE function does not work while a sub-  
picture is displayed.  
• The still picture cannot be output from the TV.  
• The FREEZE function is cleared if no operation is  
performed for approximately one minute.  
A
B
A
B
D0051  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control buttons and functions  
Cancelling the PIP function:  
Press the R button or b button.  
3 Press the a button  
The multi-pictures disappear and the chosen picture  
appears.  
• If the main-picture signal is poor, the quality of the  
sub-picture may also be poor.  
Cancelling the multi-pictures:  
Press the b button, the number buttons or the a  
button.  
• If the pictures have different standards, the top and  
bottom of one of them may be missing.  
• If an external device is operated, the sub-picture may  
disappear. If this happens, press the R button again  
to redisplay the sub-picture.  
• Pictures from external devices cannot be displayed in  
the 12-pictures multi mode.  
• You cannot view a scrambled channel in the sub-  
picture. If the g button is pressed when viewing a  
scrambled channel in the main-picture using an  
external decoder, the channel you have been viewing  
in the sub-picture will appear in both the main-picture  
and sub-picture.  
• The ZOOM function does not work in the twin-  
picture mode.  
• Do not press the g button while you are recording  
the TV output on the VCR. If you do, the TV output  
signal will change.  
Operating a JVC brand VCR or DVD  
player  
You can operate a JVC brand VCR or DVD player.  
Pressing the button having the same appearance as the  
original remote control button of a device makes the  
function work in the same way as the original remote  
control.  
1 Set the VCR/TV/DVD Switch to the VCR or DVD  
position  
• The BLUE BACK function does not work in the twin  
picture mode or the picture-in-picture mode.  
• A progressive-scanning picture cannot be displayed  
as the sub-picture.  
VCR:  
When you are operating the VCR, set the switch to the  
VCR position. You can turn the VCR on or off with the  
# (Standby) button.  
Pay attention to the following.  
- When the VIDEO-4 picture is a progressive-  
scanning picture, you cannot choose VIDEO-4  
with the p buttons.  
- When the VIDEO-4 picture signal is changed to a  
progressive-scanning picture while the VIDEO-4  
picture is displayed as the sub-picture, the PIP  
function is cancelled.  
- The pictures cannot be swapped when a  
progressive-scanning picture from VIDEO-4 is  
being displayed as the main picture.  
DVD:  
When you are operating the DVD player, set the switch  
to the DVD position. You can turn the DVD player on or  
off with the # (Standby) button.  
2 Press the VCR/DVD Control Button to control  
your VCR or DVD player  
• If your device is not made by JVC, these buttons  
cannot be used.  
• Even if your device is made by JVC, some of these  
buttons or any one of the buttons may not work,  
depending on the device.  
• The sub-picture cannot be output from the TV.  
• You can use the p buttons to choose a TV channel.  
The VCR will receive or choose the chapter the DVD  
player plays back.  
• Some DVD player models use the p buttons for  
both operating of Fast forward/backward functions  
and choosing the chapter. In this case, the 253  
buttons do not work.  
Using the MULTI-PICTURE function  
You can display multi-pictures that enable you to easily find  
a program you want to view.  
1 Press the X button to display multi-pictures  
The channels are displayed in the channel number order.  
The multi-pictures will appear in multi-picture mode.  
• Set the VCR/TV/DVD switch to the TV position  
when you turn the TV on or off.  
12-pictures multi:  
To use D button  
Still pictures  
Some DVDs allow you to select the disc contents using the  
menu. When you playback these DVDs, you can select the  
subtitle language and sound-track language, etc. by using  
the DVD menu.  
Moving picture  
D0058-EN  
1 Press D button during play back  
The DVD menu appears on the screen.  
2 Press the p buttons to choose the screen you  
want to see  
• Press D button again to resume playback  
at the scene when you pressed the button.  
The chosen picture changes to a moving picture.  
2 Press 6 or 5 buttons to select the desired  
item  
3 Press a button  
The menu continues to another screen.  
Repeat steps 2 and 3 to set additional items if any.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext function  
Basic operation  
Using the List Mode  
You can store the numbers of your favourite teletext pages  
in memory and call them up quickly using the colour  
buttons.  
1 Choose a TV channel with a teletext broadcast  
2 Make sure to set the VCR/TV/DVD switch to the  
TV position.  
To store the page numbers:  
1 Press B button to engage the List mode  
The stored page numbers are displayed at the bottom of  
the screen.  
2 Press a Colour button to choose a position.  
Then press the Number buttons to enter the  
page number  
3 Press g (Text) button to display the teletext  
Pressing g (Text) button changes the mode as follows:  
TEXT  
TEXT  
---  
---  
TV mode  
TV and text mode  
TEXT  
TEXT  
---  
---  
3 Press and hold down A (Store) button  
The four page numbers blink white to indicate that they  
are stored in memory.  
Text mode  
D1043  
4 Choose a teletext page by pressing the p p  
To call up a stored page:  
buttons, Number buttons or Colour buttons  
1 Press the B button to engage the List mode  
To return to the TV mode:  
Press the b button or g (Text) button.  
2 Press a colour button to which a page has been  
assigned  
• If you have trouble receiving teletext broadcasts,  
consult your local dealer or the teletext station.  
• The ZOOM function will not operate in the TV and  
text mode or Text mode.  
• No menu operations are possible when viewing a  
teletext programme.  
To exit the List mode:  
Press the B button again.  
• Language display depends on the country which was  
set on the TELETEXT LANGUAGE menu. If  
characters on a Teletext programme do not appear  
properly, change the TELETEXT LANGUAGE  
Setting to other country’s. For detail, “Changing the  
TELETEXT LANGUAGE setting” on page 32.  
Hold  
You can hold a teletext page on the screen for as long as  
you want, even while several other teletext pages are being  
received.  
Press the C (Hold) button  
Hold indication  
When viewing a teletext programme, the text  
periodically moves a little at a time towards either the  
top or bottom of the screen. This is to prevent burn-in  
and is not a malfunction.  
To cancel the Hold function:  
Press C (Hold) button again.  
• The Hold function is cleared if no operation is performed  
for approximately one minute.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Teletext function  
Sub-page  
Some teletext pages include sub-pages that are  
automatically displayed.  
1 Choose a teletext page that includes sub-pages  
Sub-page numbers that can be viewed are automatically  
displayed at the top of the screen.  
2 Press the 5 buttons to choose a sub-page  
number  
Reveal  
Some teletext pages include hidden text (such as answers to  
a quiz).  
You can display the hidden text.  
Each time you press the E (Reveal) button, text is  
hidden or revealed  
Size  
You can double the height of the teletext display.  
Press the F (Size) button.  
Index  
You can return to the index page instantly.  
Press G (Index) button  
Returns to page 100 or a previously specified page.  
Cancel  
You can search for a teletext page while watching TV.  
1 Press the Number button to enter a page  
number, or press a Colour button  
The TV searches for a teletext page.  
2 Press H (Cancel) button  
The TV programme appears. When the TV finds the  
teletext page, its page number appears in the upper left  
of the screen.  
3 Press H (Cancel) button to return to a teletext  
page when the page number is on the screen  
• The TV mode cannot be resumed even by pressing  
the H (Cancel) button. A TV programme is  
temporarily displayed instead of the teletext  
programme.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s menu  
This TV has a number of functions you can operate using  
menus. To fully utilize all your TV’s functions, you need to  
understand the basic menu operating techniques fully.  
3 Press the 6 buttons to choose a function  
• For details of the functions in the menus, see the  
following pages.  
4 Press the 5 buttons to choose the setting of  
that function  
• If you want to operate a function which appears only  
with its name, follow the descriptions of that function  
on the following pages.  
• The display appearing at the bottom of a menu shows  
you a button on the remote control that you can use  
when you operate a chosen function.  
5 Press the a button to complete the setting  
The menu disappears.  
• When watching the television with the NTSC system,  
the menus are displayed at about half of their normal  
vertical size.  
• The menu will be disappear if you press the p p  
buttons while the menu is displayed.  
Operation with the buttons on the TV  
You can also operate the menus using the buttons on the  
front panel of the TV.  
Basic operation  
1 Press the a button to display the MENU (main  
menu)  
MENU  
MENU/OK button  
TV/AV button  
6 buttons  
PICTURE SETTING  
PICTURE FEATURES  
SOUND SETTING  
VIDEO SETTING  
FEATURES  
INSTALL  
BACK  
OK  
5 buttons  
TV  
D0013-EN  
• Press the a button twice while watching the  
MULTI-PICTURE mode.  
• The display appearing at the bottom of a menu  
indicates buttons on the remote control you can use  
when you operate a chosen function.  
The menu will disappear if no operation is performed for  
approximately one minute.  
(Information) button  
h
BACK  
TV  
OK  
b button  
a button  
2 Press the 5 and 6 buttons to choose a  
menu title, and press the a button  
The menu appears.  
To return to the previous menu:  
Press the h (information) button.  
To exit a menu instantly:  
Press the b button.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE SETTING  
Refer to “Using the TV’s menu” (see page 20) for details of  
displaying the menu.  
WHITE BALANCE  
You can select one of three WHITE BALANCE modes  
(three tones of white) to adjust the white balance of the  
picture. Since white is the colour which is used as a  
reference for all the other colours, changing the WHITE  
BALANCE mode affects the appearance of all the other  
colours on the screen.  
PICTURE SETTING  
PICTURE MODE  
CONTRAST  
BRIGHT  
SHARP  
COLOUR  
BRIGHT  
TINT  
WHITE BALANCE  
MID  
BACK  
OK  
RESET  
TV  
COOL:  
D0014-EN  
A bluish white. Using this mode when watching bright  
pictures allows you to enjoy a more vivid and bright picture.  
PICTURE MODE  
MID:  
The normal white colour.  
You can choose one of three PICTURE MODEs to adjust  
the picture settings automatically.  
WARM:  
A reddish white. Using this mode when watching films  
allows you to enjoy colours that are characteristic of films.  
BRIGHT:  
Heightens contrast and sharpness.  
STANDARD:  
Standardizes picture adjustment.  
SOFT:  
Softens contrast and sharpness.  
Picture Adjustment  
You can change the picture settings of each PICTURE  
MODE mode as you like.  
CONTRAST:  
You can adjust the picture contrast.  
2 :lower  
3 : higher  
BRIGHT:  
You can adjust the picture brightness.  
2 :darker  
3 : brighter  
SHARP:  
You can adjust the picture sharpness.  
2 :softer  
3 : sharper  
COLOUR:  
You can adjust the picture colour.  
2 :lighter  
3 : deeper  
TINT:  
You can adjust the picture tint.  
2 :reddish  
3 : greenish  
• You can change the TINT setting (picture hue) when the  
colour system is NTSC 3.58, NTSC 4.43 or a signal  
from the VIDEO-4 terminal.  
However, operation is not possible when the PIP  
function main picture is set to VIDEO-4.  
To return to the default settings in each PICTURE  
MODE:  
Press the blue button.  
• This returns the picture settings in the PICTURE MODE  
mode you have chosen to the default settings, and stores  
them in the PICTURE MODE mode.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE FEATURES  
Refer to “Using the TV’s menu” (see page 20) for details of  
displaying the menu.  
Super DigiPure  
The Super DigiPure function uses the latest in digital  
technology to give you a natural-looking picture. The Super  
DigiPure function includes the following two functions.  
PICTURE FEATURES  
DIGITAL VNR  
AUTO  
AUTO  
Super DigiPure  
COLOUR SYSTEM  
PULL DOWN  
4:3 AUTO ASPECT  
COLOUR MANAGEMENT  
PIP  
AUTO  
ON  
DigiPure function:  
This function helps to create a natural-looking picture by  
eliminating unnecessary edges from high-contrast and crisp  
images. For images with low-contrast, edges are added to  
produce a sharper, more detailed picture.  
BACK  
TV  
OK  
D1015-EN  
You can choose from the three DigiPure function settings of  
AUTO, MIN and MAX.  
• If you set the DigiPure effect too high on a low-quality  
picture that contains a lot of noise, this may actually  
make the noise worse. We recommend you use the  
AUTO setting if you can.  
DIGITAL VNR  
The DIGITAL VNR function cuts down the amount of  
noise in the original picture.  
You can choose from the three DIGITAL VNR function  
settings of AUTO, MIN and MAX.  
Picture motion compensation function:  
This function displays fast-moving pictures (for example,  
the players or ball in a football game) more smoothly and  
naturally on the screen.  
• The effect level of the picture motion compensation  
function cannot be changed. The effect level is the same  
no matter which of the AUTO, MIN or MAX settings is  
used.  
AUTO:  
The TV will automatically adjust the level of the DIGITAL  
VNR effect to match the amount of noise in the picture,  
giving you the best possible picture.  
• If you set the DIGITAL VNR effect too high it can make  
the picture less sharp. It is recommended to use the  
AUTO setting if you can.  
• AUTO cannot be chosen when you are watching the  
VIDEO-4 picture.  
1 Choose Super DigiPure  
2 Press the 5 buttons to choose a setting.  
Then press the a button  
MIN:  
The level of the DIGITAL VNR effect is set to the  
minimum. If you set the DIGITAL VNR function to AUTO  
but feel that the sharpness of the original picture has not  
been reproduced fully, change the setting from AUTO to  
MIN.  
AUTO:  
The TV will automatically adjust the level of the DigiPure  
effect to match the amount of noise in the picture, giving the  
best possible picture.  
• The MIN setting is not suitable for low-quality pictures  
which contain a lot of noise.  
• AUTO cannot be chosen when you are watching the  
VIDEO-4 picture.  
MAX:  
MIN:  
The level of the DIGITAL VNR effect is set to the  
maximum. If you set the DIGITAL VNR function to AUTO  
but still notice some noise, change the setting from AUTO  
to MAX.  
• The MAX setting is not suitable for high-quality pictures  
which contain very little noise.  
The level of DigiPure effect is set to the minimum. When  
you set the Super DigiPure function to AUTO and notice  
some noise, change the setting from AUTO to MIN.  
• The MIN setting is not suitable for high-quality pictures  
which contain very little noise.  
MAX:  
The level of DigiPure effect is set to the maximum. If you  
set the Super DigiPure function to AUTO but feel that the  
original picture quality has not been reproduced fully,  
change the setting from AUTO to MAX.  
• The MAX setting is not suitable for low-quality pictures  
which contain a lot of noise.  
• When a progressive-scanning picture is being displayed,  
the AUTO setting cannot be chosen with the DIGITAL  
VNR function.  
OFF:  
The Super DigiPure function is turned off.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE FEATURES  
COLOUR SYSTEM  
PULL DOWN  
The colour system is chosen automatically. However, if the  
picture is not clear or no colour appears, choose the colour  
system manually.  
The PULL DOWN function displays a cinema film picture  
more smoothly and naturally on the screen.  
AUTO:  
The television automatically recognizes the type of signal  
and turns the function on and off.  
ON:  
1 Choose COLOUR SYSTEM. Then press the a  
button  
The sub-menu of the COLOUR SYSTEM function  
appears.  
This function is turned on.  
OFF:  
COLOUR SYSTEM  
This function is turned off.  
MAIN  
SUB  
• The motion may appear unnatural when viewing images  
with the NTSC colour system. When the PULL DOWN  
function is set to AUTO or ON, the motion may appear  
unnatural when viewing images with the NTSC colour  
system.  
PAL  
AUTO  
BACK  
OK  
TV  
D0016-EN  
• You cannot select this function in the twin pictures mode  
or the picture in picture mode.  
2 Press the 5 buttons to choose MAIN or SUB  
MAIN:  
You can change the colour system of the main-picture.  
SUB:  
4:3 AUTO ASPECT  
You can change the colour system of the sub-picture.  
You can choose one of three ZOOM modes, REGULAR,  
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the  
normal picture (4:3 aspect ratio).  
• Choose MAIN when a sub-picture is not displayed.  
3 Press the 6 buttons to choose the  
appropriate colour system. Then press the a  
button  
1 Choose 4:3 AUTO ASPECT then press the a  
button  
AUTO:  
4:3 AUTO ASPECT  
This function detects a colour system from the input  
signal. You can only use this when you are viewing a  
picture from programme number PR 0 (AV), or a  
VIDEO terminal.  
PANORAMIC  
REGULAR  
14:9 ZOOM  
BACK  
OK  
TV  
Refer to the following table for the various international  
colour systems.  
D0017-EN  
Colour system  
2 Press the 6 buttons to choose a ZOOM mode.  
Then press the a button  
Area  
Country or region  
System  
Bahrain, Kuwait, Oman, Qatar, United  
Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore,  
Thailand, India, etc.  
COLOUR MANAGEMENT  
PAL  
This TV supports the COLOUR MANAGEMENT function  
to ensure dull colours are compensated to produce natural  
hues.  
The COLOUR MANAGEMENT function is on by default.  
ON:  
COLOUR MANAGEMENT function is turned on.  
OFF:  
COLOUR MANAGEMENT function is turned off.  
Asia,  
Middle  
East  
China, Vietnam, etc  
Hong Kong, etc  
PAL  
PAL  
Islamic Republic of Iran, Lebanon,  
Saudi Arabia, etc.  
SECAM  
Philippines, Taiwan, Myanmar, etc  
Russia, etc  
NTSC  
SECAM  
PAL  
• Set this function to ON under normal conditions.  
Czech Republic, Poland, etc  
Germany, Holland, Belgium, etc  
UK, etc  
Europe  
PAL  
PIP  
PAL  
You can choose one of four positions for the sub-picture.  
Oceania Australia, New Zealand, etc  
Republic of South Africa, etc  
Africa Nigeria, etc  
PAL  
PAL  
1 Press the 6 buttons to choose PIP. Then  
press the a button  
PAL  
The PIP menu appears.  
Egypt, Morocco, etc  
SECAM  
PIP  
• The AUTO function may not function properly if you  
have poor signal quality. If the picture is abnormal in the  
AUTO function, choose another colour system  
manually.  
BACK  
OK  
TV  
D0061-EN  
2 Press the 5 buttons to choose the position.  
Then press the a button  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND SETTING  
Refer to “Using the TV’s menu” (see page 20) for details of  
displaying the menu.  
SPEAKER  
You can turn off the sound from the TV speakers; but you  
should only do this if an audio system is connected to the  
TV as a substitute for the TV speakers.  
SOUND SETTING  
STEREO/  
BASS  
TREBLE  
BALANCE  
SPEAKER  
BBE  
CINEMA SURROUND ON  
ON  
ON  
OFF  
OFF  
OFF  
OFF  
ON:  
A.H.B.  
HEADPHONE  
ON  
The TV speakers issue sound.  
BACK  
OK  
OFF:  
TV  
The TV speakers does not issue sound.  
D0019-EN  
BBE  
STEREO / I • II  
You can use the BBE function to enjoy easy-to-listen sound  
that is faithful to the original sound recorded.  
When you are viewing a bilingual broadcast programme,  
you can choose the sound from Bilingual I (Sub I) or  
Bilingual II (Sub II). When the stereo broadcasting is  
received poorly, you can change from stereo to mono sound  
so that you can hear the broadcast more clearly and easily.  
ON:  
This function is turned on.  
OFF:  
This function is turned off.  
s: Stereo sound  
• Licensed by BBE Sound, Inc. BBE is a registered  
trademark of BBE Sound, Inc.  
v : mono sound  
t : Bilingual I (sub I)  
u : Bilingual II (sub II)  
CINEMA SURROUND  
• The sound mode you can choose differs depending on  
the TV programme.  
• This function does not work in the VIDEO modes. And  
this function does not appear in the SOUND SETTING  
menu.  
You can enjoy Surround sound with a “live” effect by using  
the CINEMA SURROUND function.  
ON:  
CINEMA SURROUND function is turned on.  
OFF:  
CINEMA SURROUND function is turned off.  
Sound Adjustment  
You can adjust the sound to your liking.  
A.H.B. (Active Hyper Bass)  
BASS:  
Used when you want to emphasize the bass sound.  
You can adjust the low tone of the sound.  
2 :weaker  
3 : strong  
ON:  
This function is turned on.  
OFF:  
TREBLE:  
This function is turned off.  
You can adjust the high tone of the sound.  
2 :weaker  
3 : strong  
BALANCE:  
You can adjust the volume balance between the left and  
right speaker.  
2 :turn the left speaker’s volume level up.  
3 : turn the right speaker’s volume level up.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND SETTING  
HEADPHONE  
You need to use the HEADPHONE menu to adjust the  
volume of the headphones.  
The HEADPHONE menu can also be used to set whether or  
not sound comes from the TV speakers when the  
headphones are being used and to perform the settings for  
the sound coming from the headphones.  
1 Press the 6 buttons to choose HEADPHONE.  
Then press the a button  
The sub-menu of the HEADPHONE function appears.  
D0044-EN  
2 Press the 6 buttons to choose a function.  
Then press the 5 buttons to change the  
setting  
VOLUME:  
You can change the volume of the headphones.  
TV SPEAKER:  
You can turn the TV’s speakers on or off.  
ON:  
The sound comes from the TV’s speakers when using  
the headphones.  
OFF:  
The sound does not come from the TV’s speakers  
when using the headphones.  
OUTPUT:  
You can choose the sound output to the headphones.  
MAIN:  
You can listen to the sound of the main-picture with  
your headphones.  
SUB:  
You can listen to the sound of the sub-picture with  
your headphones.  
• When the sub-picture is a television programme,  
the sound becomes monaural.  
3 Press the a button  
Hint:  
When a sub-picture is displayed, the sound of the sub-  
picture can be listened to with the headphones while  
listening to the sound of the main-picture with the TV  
speakers. To do this, set TV SPEAKER to ON and  
OUTPUT to SUB.  
• Headphones do not work with sound adjusted for BASS  
and TREBLE, BBE effect sound, A.H.B. effect sound,  
and CINEMA SURROUND effect sound.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO SETTING  
Refer to “Using the TV’s menu” (see page 20) for details of  
displaying the menu.  
VIDEO SETTING  
VIDEO-1  
VIDEO-3  
VIDEO-2  
VIDEO-5  
VIDEO-4  
TV  
BACK  
ID LIST  
TV  
OK  
D0020-EN  
ID LIST  
You can have a name corresponding to the devices  
connected for each VIDEO terminal. Giving a name to a  
VIDEO terminal makes the VIDEO terminal number appear  
on the screen, together with the name.  
1 Choose a VIDEO terminal  
The image from the chosen external equipment is  
displayed in the background on the menu. The image on  
the TV is displayed if the TV is chosen.  
2 Press the blue button to display the name list  
(ID LIST)  
VIDEO SETTING  
ID LIST  
VHS  
VIDEO-1  
VIDEO-3  
VIDEO-5  
TV  
S-VHS  
VIDEO-2  
VIDEO-4  
DVC  
SAT  
STB  
GAME  
LD  
DVD  
8mm  
Hi-8  
BACK  
OK  
TV  
D0021-EN  
3 Press the 6 buttons to choose a name. Then  
press the a button  
The ID LIST disappears and the name is assigned to the  
VIDEO terminal.  
• You cannot assign a VIDEO terminal name not found  
in the name list (ID LIST).  
To erase a name assigned to the VIDEO  
terminal:  
Choose a blank space.  
4 Press the a button to complete the setting  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Refer to “Using the TV’s menu” (see page 20) for details of  
displaying the menu.  
To set the CHANNEL GUARD function  
1 Choose CHANNEL GUARD, then press the  
o button  
FEATURES  
SLEEP TIMER  
BLUE BACK  
“SET ID NO.” (ID number setting screen) appears.  
OFF  
ON  
CHANNEL GUARD  
REFRESH  
PICTURE SHIFT  
OFF  
SET ID NO.  
BACK  
OK  
TV  
0000  
BACK  
D0023-EN  
TV  
OK  
D0025-EN  
SLEEP TIMER  
2 Set the ID number to your liking  
You can set the TV to automatically turn off after a  
specified period of time.  
1 Press the 6 buttons to choose a number.  
2 Press the 5 buttons to move the cursor.  
1 Choose SLEEP TIMER, then press the a  
button  
3 Press the a button  
A Sub-menu of the SLEEP TIMER function appears.  
The Sub-menu of CHANNEL GUARD appears.  
SLEEP TIMER  
CHANNEL GUARD  
0
120  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
OFF  
BBC1  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
01  
02  
03  
BACK  
OK  
TV  
D0024-EN  
LOCK  
BACK  
OK  
TV  
2 Press the 5 buttons to set the period of time.  
Then press the a button  
D0026-EN  
You can set the period of time a maximum of 120  
minutes (2 hours) in 10 minute increments.  
• One minute before the SLEEP TIMER function turns  
off the TV, “GOOD NIGHT!” appears.  
• The SLEEP TIMER function cannot be used to turn  
off the TV’s main power.  
4 Press the 6 buttons to choose a TV channel  
Every time you press the 6 buttons, the Programme  
number (PR) changes, and the picture of the TV channel  
registered in the Programme number (PR) is displayed  
on the screen.  
• When the SLEEP TIMER function is on, you can  
display the Sub-menu of the SLEEP TIMER function  
again to confirm and/or change the remaining period  
of time of the SLEEP TIMER function. Press the a  
button to exit the menu after confirming and / or  
changing the remaining time.  
5 Press the blue button and set the CHANNEL  
GUARD function.  
Then press the a button  
n (CHANNEL GUARD) appears and the TV channel is  
locked.  
To cancel the SLEEP TIMER function:  
Press the 2 button to set a period of time to “OFF”.  
To reset the CHANNEL GUARD function:  
Press the blue button again.  
n (CHANNEL GUARD) disappears.  
BLUE BACK  
To disable easy resetting of the CHANNEL GUARD  
function, the menu disappears by choosing the  
CHANNEL GUARD function and pressing the a  
button as in the ordinary menu operation.  
You can set the TV to automatically change to a blue screen  
and mute the sound if the signal is weak or absent, or when  
there is no input from an external device.  
ON:  
To view a locked TV channel  
This function is turned on.  
OFF:  
1 Choose a Programme number (PR) in which a  
TV channel locked with the Number buttons or  
PR LIST  
This function is turned off.  
The screen changes to blue and the n (CHANNEL  
GUARD) appears. You cannot view the TV channel.  
CHANNEL GUARD  
When there is a TV channel you wish your children not to  
watch, you can use the CHANNEL GUARD function to  
lock out the TV channel. Even when a child chooses a  
Programme number (PR) in which a locked TV channel has  
been registered, the screen will change to blue and displays  
n (CHANNEL GUARD) so the TV channel cannot be  
viewed. Unless you enter a pre-set ID number by a special  
operation, the lock cannot be released and the child cannot  
view the TV channel programmes.  
2 Press the  
(Information) button to display “ID  
h
NO.” (ID NO. input screen)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
3 Press the Number buttons to enter the ID  
number  
The lock is temporarily released so you can view the TV  
channel.  
If you have forgotten the ID number:  
Perform step 1 of “To set the CHANNEL GUARD  
function”. After confirming the ID number, press the  
b button to exit the menu.  
• Even if you reset the lock temporarily, it does not  
mean that the CHANNEL GUARD function set for  
the TV channel is cancelled. The next time anyone  
attempts to view the TV channel, it will be locked  
again.  
• When you would like to cancel the CHANNEL  
GUARD function, you must perform the operation  
“To set the CHANNEL GUARD function” again.  
• To disable easy choosing of a Programme number  
(PR) in which a locked TV channel has been  
registered, the Programme number (PR) has been set  
that it cannot be chosen by the 6 buttons or the  
operation buttons at the TV.  
• To disable easy resetting of the lock, “ID NO.” (ID  
NO. input screen) is set so that it cannot appear unless  
you press the  
(Information) button.  
h
REFRESH  
When burn-in is minimal, burn-in and residual images may  
be softened with the REFRESH function.  
1 Choose REFRESH  
2 Press the a button  
Snow appears on the screen. Leave the TV in this  
condition for a few hours.  
3 After a few hours, press the TV, number  
buttons, or # button  
Press the A button for the TV.  
The REFRESH function has no effect if used only for a  
short time.  
PICTURE SHIFT  
The picture displayed on the screen is shifted up, down and  
to the left and right at regular intervals. In order to prevent  
burn-in, set this function to FAST or SLOW.  
1 Choose PICTURE SHIFT  
2 Press the 5 buttons to choose a mode  
OFF:  
PICTURE SHIFT is turned off.  
SLOW:  
The picture is shifted every 30 minutes.  
FAST:  
The picture is shifted every 10 minutes.  
3 Press the a button  
The menu disappears  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
Refer to “Using the TV’s menu” (see page 20) for details of  
displaying the menu.  
3 Press the a button to start the AUTO  
PROGRAM function  
INSTALL  
The AUTO PROGRAM menu appears and received TV  
channels are automatically registered in the Programme  
numbers (PR).  
• To cancel the AUTO PROGRAM function, press the  
b button.  
LANGUAGE  
AUTO PROGRAM  
EDIT / MANUAL  
BACK  
OK  
TV  
D0029-EN  
AUTO PROGRAM  
EDIT  
PR  
ID  
CH / CC  
CH 10  
20%  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
01  
02  
03  
LANGUAGE  
BACK  
OK  
TV  
You can choose the language you want to use for the on-  
screen display from the language list in a menu.  
ID  
BACK  
OK  
MOVE  
TV  
INSERT  
DELETE  
MANUAL  
D0004-EN  
1 Choose LANGUAGE, then press the a button  
A sub-menu of the LANGUAGE function appears.  
After the TV channels have been registered in  
the Programme numbers (PR), the EDIT menu  
appears.  
LANGUAGE  
• You can proceed to edit the Programme numbers  
(PR) using the EDIT/MANUAL function. For details,  
see “EDIT/MANUAL” on page 29.  
• If you do not need to use the EDIT/MANUAL  
function, go to the next step.  
BACK  
TV  
OK  
D0002(E)-EN  
4 Press the a button  
2 Press the 5 and 6 buttons to choose a  
language. Then press the a button  
EDIT/MANUAL  
AUTO PROGRAM  
The EDIT/MANUAL functions are divided into two types:  
editing of the current Programme numbers (PR) (EDIT  
functions) and manual registration of a TV channel you  
want to view to the Programme number (PR) (MANUAL  
function). The details about these functions are as follows:  
You can automatically register the TV channels which can  
be received well at your residence in the TV’s Programme  
numbers (PR) by performing the following.  
1 Choose AUTO PROGRAM. Then press the a  
button  
Caution  
• Using the MOVE, DELETE or INSERT function  
rewrites the current Programme numbers (PR) list.  
Resultingly, the Programme number (PR) of some of  
the TV channels will change.  
The TELETEXT LANGUAGE menu appears as a sub-  
menu of the AUTO PROGRAM function.  
TELETEXT LANGUAGE  
• Using the MANUAL function for a TV channel for which  
the CHANNEL GUARD function has been set cancels  
the CHANNEL GUARD function for the TV channel.  
• When a TV channel has already been registered in PR  
99, using the INSERT function deletes the TV channel.  
GROUP-1  
GROUP-2  
GROUP-3  
GROUP-4  
BACK  
TV  
OK  
D1003-EN  
1 Choose EDIT/MANUAL, then press the a  
2 Press the 6 buttons to choose the teletext  
language group that corresponds to the  
language of teletext programme that you want  
to watch  
button  
EDIT  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
01  
02  
03  
Group  
Languages  
GROUP-1 Turkish, Hungarian, English, German,  
French, Italian, Spanish, Portuguese,  
Greek, Swedish, Finnish  
ID  
BACK  
INSERT  
DELETE  
MANUAL  
TV  
OK  
MOVE  
D0038-EN  
• For Programme number PR 0, “AV” appears in the  
Programme numbers (PR) list.  
• A VIDEO terminal number does not appear in the  
Programme numbers (PR) list.  
GROUP-2 Polish, Serbian, Croatian, Slovenian,  
Czech, Slovak, Rumanian, Hungarian,  
German, French, Italian, Swedish,  
Finnish  
• The CH/CC number is a number unique to the TV  
and corresponding to the Channel number of a TV  
channel. For the relationship of a Channel number  
and a CH/CC number, see “CH/CC numbers” on  
page 35.  
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,  
Estonian, Ukrainian, Serbian, Croatian,  
Slovenian, Czech, Slovak, English,  
German  
GROUP-4 Arabic, Czech, Slovak, Hungarian,  
English, German, French, Italian,  
Spanish, Portuguese, Swedish, Finnish  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
2 Follow the operation description of a function  
2 Press the red button to start the ID function  
you want to use and operate the function  
EDIT  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
MOVE:  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
01  
02  
03  
This function changes a Programme number (PR) of a  
TV channel.  
ID:  
This function registers a Channel name (ID) to a TV  
channel.  
ID LIST  
BACK  
TV  
OK  
INSERT:  
D0031-EN  
This function adds a new TV channel in the current  
Programme numbers (PR) list by using the CH/CC  
number.  
• You cannot use the INSERT function if you do not  
know a Channel number of a TV channel. Use the  
MANUAL function to register a TV channel in the  
Programme number (PR).  
3 Enter a channel name (ID).  
Press the 6 buttons to choose a character.  
Press the 5 buttons to move the cursor.  
EDIT  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
01  
02  
03  
DELETE:  
This function deletes an unnecessary TV channel.  
M
MANUAL:  
ID LIST  
BACK  
TV  
OK  
This function manually registers a new TV channel in a  
Programme number (PR).  
D0032-EN  
To cancel the ID function:  
Press the (Information) button.  
3 Press the a button  
h
MOVE  
4 Press the a button to register a Channel name  
1 Press the 6 buttons to choose a TV channel  
Every time you press the 6 buttons, the Programme  
number (PR) is changed over, and the picture of the TV  
channel registered in the Programme number (PR)  
appears on the screen.  
(ID) to a TV channel  
INSERT  
Preparation:  
• A CH/CC number unique to this TV and corresponding  
to the Channel number of a TV channel is required. Find  
the corresponding CH/CC number from a table “CH/CC  
numbers” on page 35 based on the Channel number of  
the TV channel.  
2 Press the 3 button to start the MOVE function  
EDIT  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
CH  
CH  
CH  
CH  
CH  
CH  
21  
22  
23  
24  
25  
26  
1 Press the 6 buttons to choose a Programme  
number (PR) for which you will register a new  
TV channel  
CC  
01  
CC  
CC  
02  
03  
BACK  
TV  
OK  
2 Press the green button and start the INSERT  
function  
STORE  
D0030-EN  
EDIT  
3 Press the 6 buttons to choose a new  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
CH  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
21  
Programme number (PR)  
22  
23  
24  
25  
26  
To cancel the MOVE function:  
Press the  
(Information) button.  
h
02  
03  
BACK  
OK  
4 Press the 2 button to change the Programme  
number (PR) of a TV channel to a new  
Programme number (PR)  
0
9
TV  
CH / CC  
D0034-EN  
ID  
3 Press the 6 buttons to choose “CC” or “CH”  
according to the CH/CC number of the TV  
channel  
1 Press the 6 buttons to choose a TV channel  
Every time you press the 6 buttons, the Programme  
number (PR) is changed over, and the picture of the TV  
channel registered in the Programme number (PR)  
appears on the screen.  
To cancel the INSERT function:  
Press the  
(Information) button.  
h
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
Sound system  
4 Press the Number buttons to enter the  
remaining CH/CC number  
Area  
Country or region  
System  
The TV shifts to registration mode.  
Bahrain, Kuwait, Oman, Qatar, United  
Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore,  
Thailand, India, etc.  
When the registration is completed, the picture of the TV  
channel appears on the screen.  
B/G  
• The CH/CC number is a number indicating the  
broadcast frequency to the TV. If the TV cannot  
detect the TV channel corresponding to the broadcast  
frequency indicated by the CH/CC number, a picture  
in the no-signal state appears.  
Asia,  
Middle  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
D/K  
I
Islamic Republic of Iran, Lebanon,  
Saudi Arabia, etc.  
B/G  
DELETE  
Philippines, Taiwan, Myanmar, etc  
Russia, etc.  
M
1 Press the 6 buttons to choose a TV channel  
Every time you press the 6 buttons, the Programme  
number (PR) is changed over, and the picture of the TV  
channel registered in the Programme number (PR)  
appears on the screen.  
D/K  
D/K  
B/G  
I
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
2 Press the yellow button to delete the TV  
Oceania Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Africa Nigeria, etc.  
B/G  
I
channel  
The TV channel is deleted from the Programme numbers  
(PR) list.  
B/G  
B/G  
Egypt, Morocco, etc.  
MANUAL  
1 Press the 6 buttons to choose a Programme  
number (PR) to which you want to register a  
new TV channel  
4 Press the green or red button to search for a TV  
channel  
Scanning stops when the TV finds a TV channel. Then  
the TV channel is displayed.  
2 Press the blue button to activate the MANUAL  
function  
At the right side following the CH/CC number, the  
SYSTEM (broadcasting system) of the TV channel  
appears.  
5 Press the green or red button repeatedly until  
the TV channel you want appears  
If the TV channel reception is poor:  
Press the blue or yellow button to fine-tune the TV  
channel.  
MANUAL  
PR  
AV  
01  
02  
03  
04  
05  
06  
07  
08  
09  
ID  
CH / CC  
CH  
CH  
CH  
CH  
CH  
CH  
CC  
CC  
CC  
21  
22  
23  
24  
25  
26  
(
01 B / G  
02  
03  
If you cannot hear the normal sound even when  
the picture of the TV channel appears normally:  
The SYSTEM setting is wrong. Press the 3 button and  
choose a SYSTEM that has normal sound.  
)
+
-
SEARCH  
SEARCH  
BACK  
TV  
OK  
+
-
FINE  
FINE  
SYSTEM  
6 Press the a button and register the TV  
channel to a Programme number (PR)  
The normal EDIT menu is resumed.  
D0035-EN  
To cancel the MANUAL function:  
Press the (Information) button.  
h
3 Press the 3 button to choose the SYSTEM  
(sound system) for a TV channel you want to  
register  
Refer to the following table for the various international  
sound systems.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL  
Changing the TELETEXT LANGUAGE  
setting  
After the AUTO PROGRAM function is completed, you  
can change the country you have already set by using the  
AUTO PROGRAM function.  
1 Display the INSTALL menu  
When the EDIT menu is currently being  
displayed:  
Press the  
menu.  
(Information) to return to the INSTALL  
h
2 Press the 6 buttons to choose AUTO  
PROGRAM. Then press the a button  
A TELETEXT LANGUAGE menu appears as a sub-  
menu of the AUTO PROGRAM function.  
TELETEXT LANGUAGE  
GROUP-1  
GROUP-2  
GROUP-3  
GROUP-4  
BACK  
TV  
OK  
D1003-EN  
Group  
Languages  
GROUP-1 Turkish, Hungarian, English, German,  
French, Italian, Spanish, Portuguese,  
Greek, Swedish, Finnish  
GROUP-2 Polish, Serbian, Croatian, Slovenian,  
Czech, Slovak, Rumanian, Hungarian,  
German, French, Italian, Swedish,  
Finnish  
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian,  
Estonian, Ukrainian, Serbian, Croatian,  
Slovenian, Czech, Slovak, English,  
German  
GROUP-4 Arabic, Czech, Slovak, Hungarian,  
English, German, French, Italian,  
Spanish, Portuguese, Swedish, Finnish  
3 Press the 6 buttons to choose a group  
4 Press the b button to complete the setting  
The menu disappears.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional preparation  
Connecting the external devices  
Connect the devices to the TV, paying attention to the  
following connection diagram.  
1 VCR (composite signal)  
2 VCR (S-VIDEO signal; Y/C)  
3 VCR for recording (composite signal)  
4 DVD player (composite signal)  
5 DVD player (S-VIDEO signal; Y/C)  
6 DVD player (component video signals; Pr/Pb/Y)  
7 TV game (composite signal/S-VIDEO signal; Y/C)  
8 Headphones  
Before connecting anything:  
• Read the manuals provided with the devices. Depending  
on the devices, the connection method may differ from  
the figure. In addition, the device settings may be  
changed depending on the connection method to secure  
proper operation.  
• Turn off all the devices including the TV.  
• The “Specifications” on page 38 contains the details of  
the VIDEO terminals. If you are connecting a device not  
listed in the following connection diagram, see the table  
to choose the best VIDEO terminal.  
9 Camcorder (composite signal/S-VIDEO signal; Y/C)  
0 Audio/Video cable  
- Video cable  
= Audio cable  
~ S-VIDEO cable  
• Note that connecting cables are not supplied.  
! Component cable  
OUT  
IN  
Front of the receiver  
S
VIDEO  
AUDIO  
L
R
IN(VIDEO-5)  
S
VIDEO  
AUDIO  
L
R
IN(VIDEO-5)  
IN  
AUDIO  
OUT  
AUDIO  
VIDEO  
VIDEO S-VIDEO  
R
R
R
L/MONO  
R
L
Back of the receiver  
VIDEO-1  
VIDEO-2  
L
L
L
COMPONENT(VIDEO-4)  
R
AUDIO  
OUT  
Pr  
Pb  
Y
R-AUDIO-L  
VIDEO-3  
OUT  
OUT  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional preparation  
Connecting devices to the OUT terminal  
The signals of the images and sound you are currently  
viewing with this TV are output through the OUT terminal.  
By connecting a VCR to the OUT terminal, you can record  
the currently shown image and sound to that VCR. To do  
this, connect the VCR and OUT terminal following the  
steps below.  
1 Connect the VIDEO in the OUT terminals and  
the VCR’s VIDEO IN (video input) terminal with  
a video cable  
2 Connect the AUDIO (L and R) in the OUT  
terminals and the VCR’s AUDIO IN (audio L/R  
input) terminals with an audio cable  
• When you turn off the TV, the signals from the OUT  
terminal are also turned off.  
• No signal is output when VIDEO-4 is chosen.  
Connecting headphones  
Connect the headphones with a stereo mini-jack (of 3.5 mm  
in diameter) to the headphone jack at the receiver.  
• The headphone volume is adjusted with the  
“HEADPHONE” menu (see page 25).  
Connecting Speakers/Amplifier  
See the Audio equipment connection diagram, then connect  
the audio equipment you desire to the TV.  
You can use external front speakers to listen to the TV  
sound instead of the TV speakers.  
Before connecting anything:  
• Read the manuals provided with the amplifier and  
speakers.  
• Turn the TV and amplifier off.  
• To prevent magnetism from the speakers adversely  
affecting the TV screen, use magnetically-shielded  
speakers for the front speakers.  
• Note that connecting cables are not supplied.  
Back of the receiver  
R
L
VIDEO  
L
DEO-4)  
R
AUDIO  
Y
OUT  
1 Amplifier  
2 External speakers (Magnetic-shielded type)  
• The output from the AUDIO OUT terminal is not  
interrupted by headphone connection to the TV. You  
cannot cut the sound from the front speaker even if you  
connect a headphone to the TV.  
• Adjust the volume of the external speakers with the  
amplifier.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CH/CC numbers  
When you want to use the INSERT function on page 30, find the CH/CC number corresponding to the Channel number of the TV  
channel from this table.  
US:  
CCIR:  
OIRT:  
The US channel numbers are the channel numbers used in the United States, Philippines, etc.  
The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.  
The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.  
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.  
Channel  
Channel  
CH  
US  
CCIR  
OIRT  
AUSTRALIA  
AU-0  
AU-1  
AU-2  
AU-6  
AU-7  
AU-8  
AU-9  
CC  
US  
CCIR  
OIRT  
AUSTRALIA  
AU-5  
CH02  
CH03  
CH04  
CH05  
CH06  
CH07  
CH08  
CH09  
CH10  
CH11  
CH12  
CH13  
CH14  
CH15  
CH16  
CH17  
CH18  
CH19  
CH20  
CH21  
CH22  
CH23  
CH24  
CH25  
CH26  
CH27  
CH28  
CH29  
CH30  
CH31  
CH32  
CH33  
CH34  
CH35  
CH36  
CH37  
CH38  
CH39  
CH40  
CH41  
CH42  
CH43  
CH44  
CH45  
CH46  
CH47  
CH48  
CH49  
CH50  
CH51  
CH52  
CH53  
CH54  
CH55  
CH56  
CH57  
CH58  
CH59  
CH60  
CH61  
CH62  
CH63  
CH64  
CH65  
CH66  
CH67  
CH68  
CH69  
US-2  
US-3  
US-4  
US-5  
US-6  
US-7  
US-8  
US-9  
E2  
E3  
E4  
E5  
E6  
E7  
E8  
E9  
R1  
CC01  
CC02  
CC03  
CC04  
CC05  
CC06  
CC07  
CC08  
CC09  
CC10  
CC11  
CC12  
CC13  
CC14  
CC15  
CC16  
CC17  
CC18  
CC19  
CC20  
CC21  
CC22  
CC23  
CC24  
CC25  
CC26  
CC27  
CC28  
CC29  
CC30  
CC31  
CC32  
CC33  
CC34  
CC35  
CC36  
CC37  
CC38  
CC39  
CC40  
CC41  
CC42  
CC43  
CC44  
CC45  
CC46  
CC47  
CC48  
CC49  
CC50  
CC51  
CC52  
CC53  
CC54  
CC55  
CC56  
CC57  
CC58  
CC59  
CC60  
CC61  
CC62  
CC63  
CC64  
CC75  
CC76  
CC77  
CC78  
CC79  
CC95  
CC96  
CC97  
CC98  
CC99  
S-1  
S-2  
S-3  
S-4  
S-5  
S-6  
S-7  
S-8  
R2  
R6  
R7  
R8  
R9  
AU-5A  
US-10  
US-11  
US-12  
US-13  
US-14, W+29  
US-15, W+30  
US-16, W+31  
US-17, W+32  
US-18, W+33  
US-19, W+34  
US-20, W+35  
E10  
E11  
E12  
R10  
R11  
R12  
AU-10  
AU-11  
S-9  
S-10  
S-11  
S-12  
S-13  
S-14  
S-15  
S-16  
S-17  
S-18  
S-19  
S-20  
S-21  
S-22  
S-23  
S-24  
S-25  
S-26  
S-27  
S-28  
S-29  
S-30  
S-31  
S-32  
S-33  
S-34  
S-35  
S-36  
S-37  
S-38  
S-39  
S-40  
S-41  
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
US-21, W+36 E21  
US-22, W+37 E22  
US-23, W+38 E23  
US-24, W+39 E24  
US-25, W+40 E25  
US-26, W+41 E26  
US-27, W+42 E27  
US-28, W+43 E28  
US-29, W+44 E29  
US-30, W+45 E30  
US-31, W+46 E31  
US-32, W+47 E32  
US-33, W+48 E33  
US-34, W+49 E34  
US-35, W+50 E35  
US-36, W+51 E36  
US-37, W+52 E37  
US-38, W+53 E38  
US-39, W+54 E39  
US-40, W+55 E40  
US-41, W+56 E41  
US-42, W+57 E42  
US-43, W+58 E43  
US-44, W+59 E44  
US-45, W+60 E45  
US-46, W+61 E46  
US-47, W+62 E47  
US-48, W+63 E48  
US-49, W+64 E49  
US-50, W+65 E50  
US-51, W+66 E51  
US-52, W+67 E52  
US-53, W+68 E53  
US-54, W+69 E54  
US-55, W+70 E55  
US-56, W+71 E56  
US-57, W+72 E57  
US-58, W+73 E58  
US-59, W+74 E59  
US-60, W+75 E60  
US-61, W+76 E61  
US-62, W+77 E62  
US-63, W+78 E63  
US-64, W+79 E64  
US-65, W+80 E65  
US-66, W+81 E66  
US-67, W+82 E67  
US-68, W+83 E68  
US-69, W+84 E69  
W+1  
W+2  
W+3  
W+4  
W+5  
W+6  
W+7  
W+8  
W+9  
W+10  
W+11  
W+12  
W+13  
W+14  
W+15  
W+16  
W+17  
W+18  
W+19  
W+20  
W+21  
W+22  
W+23  
W+24  
W+25  
W+26  
W+27  
W+28  
X
Y
Z
Z+1  
Z+2  
R3  
R4  
R5  
AU-3  
AU-4  
A-5  
A-4  
A-3  
A-2  
A-1  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired.  
You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has  
problems, you may think there is a problem with the TV itself.  
Important:  
• This Troubleshooting guide only covers problems whose cause are not easy to determine. If a question arise when you are  
operating a function, read the page(s) corresponding to the operation of the function well, not this Troubleshooting guide.  
• After you have followed the Troubleshooting description or the operating description of the functions concerned without any  
success, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or  
remove the rear cover of the TV.  
• When viewing images from commercially available  
video software products, or videos from videotapes  
which have been recorded improperly, the top of the  
image may be distorted. This is due to the condition of  
the video signal, and not because of malfunction.  
If you cannot turn on the TV  
• Are the AC plugs on the power cords from the TV and  
receiver connected to AC outlets?  
• Make sure to set the VCR/TV/DVD switch to the TV  
position. You cannot turn the TV on when the VCR/TV/  
DVD switch is set to the VCR or DVD position.  
Poor sound  
• Have you adjusted BASS or TREBLE properly? If not,  
follow the description “Sound Adjustment” on page 24  
to try to adjust them properly.  
• When the TV channel reception is poor, it can be hard to  
hear the stereo or bilingual sound. In this case, follow the  
description “STEREO / I • II” on page 24 to hear the  
sound more easily by changing it to a mono sound.  
If you cannot turn off the TV  
• Make sure to set the VCR/TV/DVD switch to the TV  
position. You cannot turn the TV off when the VCR/TV/  
DVD switch is set to the VCR or DVD position.  
No picture/No sound  
• Have you chosen a TV channel whose reception is  
extremely bad? In this case, the BLUE BACK function  
will be activated, the entire screen becomes blue, and the  
sound is muted. In spite of this, if you want to view the  
TV channel, follow the description “BLUE BACK” on  
page 27 to try to change the BLUE BACK function  
setting to OFF.  
Operation disabled  
• Have the batteries of the remote control become  
exhausted? Follow the description “Putting the batteries  
into the Remote control” on page 6 and replace them  
with new batteries to try to solve the problem.  
• Have you attempted to use the remote control at the sides  
or rear of the TV or at a location more than seven meters  
apart from the TV location? Operate the remote control  
in the front of your TV or a location less than seven  
meters from your TV to try to solve the problem.  
• When you are viewing a teletext programme, you cannot  
operate the menus. Press the b button to return the  
teletext programme to the ordinary TV programme to try  
operating the menus.  
• If the TV suddenly stops responding, disconnect the  
power cords of the TV and receiver from the AC outlets.  
Connect them to the AC outlets again to turn on the TV.  
If the TV returns to a normal state, it is not a failure.  
• Have you set the SPEAKER function to OFF? Follow  
the description “SPEAKER” on page 24 to confirm the  
SPEAKER function setting to try to solve the problem.  
• If the SYSTEM setting for a TV channel is incorrect, it  
may prevent the sound from being issued. Follow the  
description “EDIT/MANUAL” on page 29 to use the  
MANUAL function to try to change the SYSTEM  
setting.  
Poor picture  
• If noise totally obscures the picture (snow), the aerial or  
aerial cable may have trouble. Check the following to try  
to solve the trouble:  
Has the TV and aerial been connected properly?  
Has the aerial cable been damaged?  
Is the aerial pointed to the right direction?  
Is the aerial itself faulty?  
• If the TV or aerial receives interference from the other  
devices, stripes or noise may appear in the picture. Move  
such devices as an amplifier, personal computer, or a  
hair drier that can cause interference away from your  
TV, or try changing its location. If the aerial suffers  
interference from a radio tower or high-voltage wire,  
please contact your local dealer.  
• If the TV receives interference from signal reflecting  
from mountains or building, double-pictures (ghosting)  
will occur. Try to change the aerial’s direction or replace  
the antenna with the one with better directionality.  
• Are your COLOUR SYSTEM settings for the TV  
channels correct? Follow the description “COLOUR  
SYSTEM” on page 23 to try to solve the trouble.  
• Has COLOUR or BRIGHT been controlled properly?  
Follow the description “Picture Adjustment” on page 21  
to try to adjust them properly.  
• Videotaping teletext is not recommended because it may  
not record correctly.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Other concerns  
• When the SLEEP TIMER function operates, the TV is  
automatically turned off. If the TV is turned off  
suddenly, try to press the # (Standby) button to turn on  
the TV once again. At this time, if the TV resumes a  
normal state, there is no problem.  
• When a WSS signal is included in the broadcast signal or  
the signal from an external device, or when the TV is  
receiving a control signal from an external device, the  
ZOOM mode will change automatically. When you want  
to return to the previous ZOOM mode, press the c  
button to choose the ZOOM mode again.  
• It takes a short period of time from the time an operation  
such as changing channels is performed until an image is  
displayed. This is not a malfunction. This is the time  
required for the image to stabilize before it can be  
displayed.  
• The TV may emit a crackling sound due to a sudden  
change in temperature. It does not matter if a picture or  
sound does not show any abnormality. If you hear  
crackling sounds frequently while you are viewing the  
TV, other causes may be assumed. For precautionary  
purposes, request your service technician to inspect it.  
• In the twin pictures mode the sub-picture may disappear  
when the external device is operated. If this happens,  
press the R button and display the sub-picture again.  
• The headphone volume is adjusted with the  
“HEADPHONE” menu. It cannot be adjusted with the  
r (volume) q buttons.  
• When TV SPEAKER in the “HEADPHONE” menu is  
ON, even if the headphones are connected, sound is  
emitted from the TV speaker. When you do not want to  
emit sound from the TV speaker, turn the setting OFF.  
• Even if the PICTURE SHIFT function is turned off, the  
picture may shift to the left or right when the channel or  
input is changed. This is to prevent burn-in and is not a  
malfunction.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Model  
PD-42DV2  
Item  
Broadcasting systems  
Colour systems  
B, G, I, D, K, K1, M  
PAL, SECAM, NTSC 3.58/4.43 MHz  
Channels and frequencies  
VHF low channel (VL) =46.25 to 168.25 MHz  
VHF high channel (VH) =175.25 to 463.25 MHz  
UHF channel (U) =471.25 to 855.25 MHz  
• Receives cable channels in mid band (X to Z+2, S1 to S10), super band (S11 to S20) and hyper band (S21 to  
S41).  
Sound-multiplex systems  
Teletext systems  
A2 (B/G, D/K), NICAM (B/G, I, D/K) system  
FLOF (Fastext), TOP, WST (World Standard System)  
Languages displayed by teletext Please see the table in the description “Changing the TELETEXT LANGUAGE setting” on page 32.  
Power requirements  
Power consumption  
AC 110 to 240 V, 50/60 Hz  
TV:  
330 W, Standby: 1.5 W  
Receiver:  
30 W, Standby: 2.4 W  
Screen size  
Audio output  
Speakers  
Viewable area 107.5 cm (measured diagonally)  
Rated Power output: 18 W + 18 W  
(3 cm × 10 cm) oval × 2  
(6.5 cm × 13 cm) oval × 2  
VIDEO-1 terminal  
VIDEO-2 terminal  
VIDEO-3 terminal  
VIDEO-4 terminal  
RCA connectors × 3  
• Video input and Audio L/R inputs are available.  
RCA connectors × 3, S-VIDEO connector × 1  
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
RCA connectors × 3, S-VIDEO connector × 1  
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
RCA connectors × 5  
• Component video (Pr, Pb, Y) inputs and Audio L/R inputs are available.  
• progressive-scanning signals (625p or 525p) are available.  
VIDEO-5 terminal  
OUT terminal  
RCA connectors × 3, S-VIDEO connector × 1  
• Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.  
RCA connectors × 3  
• Video output and Audio L/R outputs are available.  
AUDIO OUT terminal  
RCA connectors × 2  
• Audio L/R outputs are available.  
Headphone jack  
Stereo mini-jack (3.5 mm in diameter)  
Dimensions (W × H × D)  
TV:  
1160 mm × 731 mm × 108 mm (TV only)  
435 mm × 99 mm × 382 mm  
38 kg (TV only)  
Receiver:  
TV:  
Weight  
Receiver:  
5.3 kg  
Accessories  
Refer to “Checking contents of packages” on page 5.  
Design and specifications subject to change without notice.  
Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration purpose  
in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this constitutes an  
infringement of copyright.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
© 2003 VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1003-MK-CR-VP  

Infinity Speaker System BassLink User Manual
ION Turntable QUICK PLAY LP User Manual
Jenn Air Cooktop CCR466B User Manual
JVC Digital Camera LYT0633 001A User Manual
JVC Projector BHL5006 S User Manual
Keating Of Chicago Indoor Furnishings Krisp Socket Assembly Kit For Straight and Offset Holes User Manual
Kensington Fax Machine 62411 User Manual
KitchenAid Refrigerator 4KSRF36D User Manual
Kompernass Electric Shaver KH 5501 User Manual
Konica Minolta Fax Machine OKIFAX 5950 User Manual