COLOUR TELEVISION
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture.............................................................. 9
Advanced setting for picture .....................................................11
Basic setting for sound............................................................. 12
Advanced setting for sound ..................................................... 13
Favorite channel and video setting .......................................... 14
Customized setting .................................................................. 15
TV channel presetting .............................................................. 17
Additional preparation .............................................................. 20
Troubleshooting ....................................................................... 21
Specifications ..............................................................Back cover
AV-29VS14
AV-25VS14
AV-21CS14
AV-21VS14
INSTRUCTIONS
GGT0039-001B-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Knowing your TV’s features
Main features
A2/NICAM
(STEREO / I II)
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2
or NICAM Sound-multiplex system.
I
AI ECO
TV detects the brightness of your room and automatically adjust the picture brightness to a
suitable level for a better eye care.
AI VOLUME
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channel.
VNR
You can reduce the picture noise when viewing noisy TV programmes or video sources.
WHITE BALANCE
You can choose one of three tones of white to match the video source such as movie,
sports, etc. Changing WHITE BALANCE affects the appearance of all other colours on the
screen.
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The
model number is indicated at the rear of your TV. When you press a button concerned to a function that is
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is
not available for your TV, it is not displayed in the menu.
1
Model No.
No.
Function
*ECO
_
_
_
_
–
–
–
–
–
–
PICTURE TILT
COMPRESS (16:9)
_
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions
No. Press
POWER
MENU/OK
To
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
5 / ∞ / 2 / 3 Select and adjust menu function.
CHANNEL -/+ Select the desired channel number.
VOLUME -/+ Adjust the volume level.
TV/VIDEO
MUTING
Select TV or video terminal input.
Turn off the volume.
Press this button again to resume the volume.
DISPLAY
Display the programme number or video terminal number, stereo/bilingual broadcast system
and PR list (channel list) on the screen.
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
0~9, -/--
Select the programme number. For two digits programme number, press -/--, then press the
number button.
+
RETURN
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
Top menu
MENU INPUT
2nd menu
EXT. INPUT
DISPLAY
PICTURE MODE
PICTURE SETTING P.10
WHITE BALANCE P.10
Location 3rd menu
Location
P.18
P.18
P.9
–
–
–
–
–
–
To
Operation
Note
–
–
–
–
Display the MENU Press the MENU/OK button
.
To exit the MENU,
press the DISPLAY
PICTURE
*If you want to
adjust PICTURE
SETTING menu,
you must set
button
EXIT menu.
to choose a Press ∞ button
menu title. Then press MENU/OK display the next page
or choose
PICTURE
–
VNR
P.15
Display the top
menu
Press 5/∞ buttons
to
FEATURES
FAVORITE CH SETTING P.14
VIDEO SETTING P.14
COLOUR SYSTEM P.9
COMPRESS (16:9) P.11
PICTURE MODE
menu to USER.
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press the DISPLAY button
.
for more functions.
Display the 2nd
menu
to choose a
PICTURE TILT
P.11
.
I
SOUND
*If you want to
adjust
EQUALIZER
menu, you must
set SOUND
MODE menu to
USER.
STEREO/I II
P.15
P.15
P.14
P.15
P.14
P.14
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Display the 3rd
menu
to choose a
AI VOLUME
SOUND MODE
EQUALIZER
BALANCE
SOUND TURBO
CINEMA SURROUND P.15
OFF TIMER
CHILD LOCK
AI ECO SENSOR P.11
AUTO PROGRAM P.19
EDIT/MANUAL
.
Return to the
previous menu
.
–
Choose the setting Press 5/∞ buttons
to choose Press the MENU/OK
of a function
a function. Then press the 2/3
button
to exit from
FEATURES
P.17
P.17
buttons
to change the setting. the menu.
–
–
–
–
–
–
Adjust the effect
level of a function
Press 5/∞ buttons
a function. Then press the 2/3
to choose
INSTALL
buttons
to adjust the effect
Press the 5/∞ buttons to
P.19
DELETE, MOVE,
MANUAL,INSERT P.18
P.17-
level.
Display the sub
LANGUAGE
BLUE BACK
AUTO SHUTOFF
VIDEO-2 SETTING P.18
AI ECO DISPLAY P.11
P.17
P.11
P.18
LANGUAGE
P.15
menu of a function. choose a function. Then press
–
–
–
–
–
–
–
MENU/OK buttons
the sub menu.
to display
–
–
–
–
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
EXIT
–
–
2nd menu
2nd menu
MENU
MENU
Top menu
Top menu
3rd menu
Note: Some functions have the 4th menus as the sub-menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
TV buttons and functions
The illustrations shown below is for AV-29VS14 and AV-21CS14 only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
No. Button/terminal Description
Front of the TV
Page
–
–
L (main power) Press to turn on or turn off the TV’s main power.
AV-29VS14
POWER lamp
Indicate the TV is being turned on or off.
No colour : TV’s main power is being turned off.
!
9
8
7
6
5
43
2
1
Red :
TV’s main power is being turned on.
Note: When you turn off the power switch while TV is in standby
mode, the light of power lamp will be off in 10 -15 seconds.
POWER
V
L/MONO
R
MENU
OK
CHANNEL
VOLUME TV/VIDEO
EXIT
IN (VIDEO-3)
ECO sensor
–
Remote control sensor
–
–
–
–
–
TV/ VIDEO
VOLUME -/+
CHANNEL -/+
MENU
Press to select TV or video mode.
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
AV-21CS14
!
9
8
7
6
4
2
1
VOLUME
MENU
CHANNEL
IN (VIDEO-3)
IN (VIDEO-2)
Video and audio input jacks for VIDEO-3 mode.
Video and audio input jacks for VIDEO-2 mode.
Headphone jack.
20
20
20
7
POWER
V
L
IN (VIDEO-2)
/
MONO
R
OK
Aerial socket.
OUTPUT
Video and audio output jacks. (The component video
signal cannot be output.)
Rear of the TV
20
COMPONENT
Video or component video, and audio input jacks for
AV-29VS14
AV-21CS14
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
COMPONENT
VIDEO-1
VIDEO-1
INPUT
(VIDEO-2)
INPUT
OUTPUT
OUTPUT
INPUT
the “VIDEO-2 SETTING” function (see page 16).
20
7
S
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1
mode
OVER
V
V
L
Y
V
L
V
L
/
V
How to operate the menus with the TV button
Work as same as the button on the
L
/
L
/
C
B
MONO
MONO
/
MONO
CR
R
R
R
R
R
TV button
Note
remote control unit
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
#
"
#
"
$
%
%
CHANNEL -/+ ∞/5 button
VOLUME -/+ 2/3 button
To select menu function.
To adjust the desired function.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
CAUTION
•
Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
2 Connecting the compatible main plug to the AC outlet.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with the aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• It the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
Rear of TV
VHF/UHF outdoor aerial
AV-29VS14
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
INPUT
OUTPUT
S
OVER
V
V
L
Y
/
V
L
L
CB
/
/
MONO
MONO
4 Turn on the TV by pressing the main power button.
CR
R
R
R
JVC logo appears on the screen.
To video
output
To audio
output
To RF
output
To S-video
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your
TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below:
LANGUAGE
AUTO PROGRAM
AUTO PROGRAM
EDIT
ENGLISH
PR
7
8
CH/CC
CH 09
CH 11
CH 13
SETUP TOUR RESTART?
CH 12
22%
9
I
3
OK
I
RESTART
NO
10
11
12
13
.
BACK
I
OK
BACK
I
IINSERT
IDELETE
IMANUAL
OK
OK MOVE
.
• Press 5/∞ button to
select your desired
language, then press
MENU/OK button.
• TV will start searching
for the channels.
• Press the red button to
cancel the SETUP TOUR
RESTART function.
If you want to make initial
settings again when the
next time you turn on the
TV, press the MENU/OK
button to activate the
SETUP TOUR RESTART
function.
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 17.
To stop AUTO
PROGRAM, press
MENU/OK button.
If the JVC logo does not appear, use LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are
located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture
PICTURE MODE
COLOUR SYSTEM
You can select the appropriate colour system when the picture is
not clear or no colour appears.
You can choose the desired picture setting with one-touch.
Press the PICTURE MODE button to select a setting.
Press the COLOUR SYSTEM button to select a setting.
SOFT
Softens contrast and sharpness.
BRIGHT
STANDARD
USER
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting as you like.
Select USER and adjust following items in the
PICTURE SETTING menu. (CONTRAST, BRIGHT,
SHARP, COLOUR, TINT*)
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE FEATURES menu
*TINT can only be adjusted in NTSC system.
COLOUR SYSTEM
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE MODE
For the colour system in each country or region, see the table
below:
To return the USER setting to the default, press the blue button
when the PICTURE SETTING menu appears.
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
System
Yemen, etc.
PAL
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
PAL
PAL
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
NTSC
SECAM
PAL
PAL
PAL
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
PAL
Egypt, Morocco, etc.
SECAM
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture (continued)
Adjusting the picture – USER
WHITE BALANCE
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
1 Select the USER in PICTURE MODE under PICTURE menu.
❇
PICTURE menu
PICTURE MODE
MENU
USER
❇
PICTURE menu
MENU
WHITE BALANCE
2 Select the PICTURE SETTING in PICTURE menu, then adjust
NORMAL
COOL
WARM
Normal white balance.
Bluish white.
Reddish white.
the setting.
❇
PICTURE menu
PICTURE SETTING
MENU
CONTRAST
BRIGHT
SHARP
COLOUR
TINT*
2 : Lower contrast
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for picture
2 Press the 5/∞ buttons until the picture become level. Then
AI ECO SENSOR (ECO)
You can adjust TV screen contrast according to the brightness of
your room.
press the MENU/OK button.
Press the ECO button to select the desired mode.
COMPRESS (16:9)
1
2
Mild contrast (recommended).
Even contrast.
You can convert a normal picture (4:3 aspect ratio) into a wide
picture (16:9 aspect ratio).
OFF
Cancel the function.
Select the COMPRESS (16:9) in the PICTURE FEATURES menu
under PICTURE menu, then choose ON or OFF.
❇
To operate this function with a menu:
❇
FEATURES menu
MENU
AI ECO SENSOR
PICTURE menu
MENU
PICTURE FEATURES menu
You can display the graphic of AI ECO SENSOR on the screen.
Select the AI ECO DISPLAY in the INSTALL menu, then choose
COMPRESS (16:9)
ON or OFF.
❇
MENU
INSTALL menu
AI ECO DISPLAY
BLUE BACK
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent, or when there is
no input from an antenna.
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earth’s magnetic force.
1 Select the PICTURE TILT in the PICTURE FEATURES menu
Select the BLUE BACK in the INSTALL menu, then choose ON or
under PICTURE menu, then press MENU/OK button.
OFF.
❇
PICTURE menu
MENU
PICTURE FEATURES menu
❇
MENU
INSTALL menu
BLUE BACK
PICTURE TILT
If you wish to continue viewing the poor picture, cancel the BLUE
BACK function.
The following display appears.
PICTURE TILT
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
BACK
I
OK
.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for sound
SOUND MODE
SOUND SYSTEM
You can select an appropriate sound system when abnormal
sound occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the
setting.
❇
MENU
SOUND menu
B/G
I
D/K
M
SOUND MODE
.
.
USER
You can change this sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz).
For details, see “EQUALIZER” on page 13.
Emphasize on both vocal sound and music.
Emphasize on music effect.
This function is not available in video mode.
For the sound system in each country or region, see the table
below:
Area
Country or Region
System
DYNAMIC
MUSIC
NEWS
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
B/G
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Emphasize on vocal sound.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
D/K
I
BALANCE
M
You can adjust the volume balance between the left and right
speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
D/K
D/K
B/G
I
B/G
I
Europe
❇
MENU
SOUND menu
BALANCE
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
B/G
SOUND TURBO
Egypt, Morocco, etc.
You can set the sound frequency to emphasize the low and high
frequency levels.
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
❇
SOUND menu
MENU
SOUND TURBO
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for sound
CINEMA SURROUND
EQUALIZER
You can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.
You can adjust the sound frequencies when selecting USER
mode in SOUND MODE.
OFF
Cancel the function.
1 Select the USER in SOUND MODE under SOUND menu.
❇
LOW
HIGH
MONO
Listen to sound with less wider audience effect.
Listen to sound with more wider audience effect.
Listen to mono sound with stereo effect.
SOUND menu
MENU
SOUND MODE
USER
2 Select the EQUALIZER in SOUND menu.
❇
MENU
SOUND menu
EQUALIZER
To operate this function with a menu:
The following display appears.
❇
SOUND menu
MENU
CINEMA SURROUND
EQUALIZER
If slight volume distortion occurs when you select HIGH mode,
change the setting to LOW mode. The CINEMA SURROUND
effect will be less noticeable.
100 300
1K
3K
8K Hz
If you use CINEMA SURROUND and SOUND TURBO together,
volume distortion might occurs.
BACK
I
OK
.
I
STEREO / I II (
)
3 Select and adjust the desired frequencies.
4 Press the MENU/OK button to exit the menu.
You can enjoy the stereo and bilingual broadcasted programmes.
Press the
button to select the desired mode.
Adjust high frequency will affect higher pitch sound and vice versa.
Select stereo sound.
Select monaural sound.
Select bilingual I (sub I).
AI VOLUME
I
II
You can adjust the volume of all the channels and video inputs to
the same level automatically.
Select the AI VOLUME in SOUND menu, then choose ON or OFF.
Select bilingual II (sub II).
Cancels the Multi Sound function, and the sound
becomes monaural.
MONO
❇
SOUND menu
This function is not available in video mode.
To operate this function with a menu:
MENU
AI VOLUME
❇
I
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
SOUND menu
MENU
STEREO / I II
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite channel and video setting
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
To register the favorite channel
You can register and recall 4 favorite channels by using the
colour buttons (red, green, yellow, blue).
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
1 In TV mode, select a TV channel (PR01-99) you desired to register.
5 Press the MENU/OK button to exit the menu.
2 Press and hold a colour button for 3 seconds or more.
“FAVORITE CHANNEL I PROGRAMMED!” appears on the
screen and current channel is registered.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture and sound settings for video inputs.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the colour button.
When the TV is in menu mode, favorite channel function is not
available.
1 Display the PICTURE menu and select VIDEO SETTING in
PICTURE FEATURES menu.
❇
MENU
PICTURE menu
PICTURE FEATURES menu
VIDEO SETTING
To adjust favorite channel setting
(FAVORITE CH SETTING)
2 Select VIDEO STATUS in VIDEO SETTING menu, then
choose the desired video input.
❇
VIDEO SETTING
VIDEO STATUS
You can adjust the picture and sound settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH
SETTING in PICTURE FEATURES menu.
VIDEO SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
VIDEO STATUS
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
VIDEO-1
❇
MENU
PICTURE menu
PICTURE FEATURES menu
To cancel the settings, choose OFF.
FAVORITE CH SETTING
SOUND MODE
EFFECT
USER
ON
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING
BACK
I
IRESET
menu, then choose the desired favorite channel.
OK
❇
FAVORITE CH SETTING
FAVORITE CHANNEL
.
FAVORITE CH SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
FAVORITE CHANNEL
CONTRAST
BRIGHT
I
PR 01
To cancel the settings, choose OFF.
SHARP
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
COLOUR
TINT
SOUND MODE
EFFECT
5 Press the MENU/OK button to exit the menu.
USER
ON
BACK
I
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
OK
.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting
VNR
CHILD LOCK
You can reduce the noise.
You can disable the front control buttons of the TV.
Select the VNR in the PICTURE FEATURES menu under
Select the CHILD LOCK in the FEATURES menu, then choose
PICTURE menu, then choose a setting of VNR function.
ON or OFF.
❇
❇
PICTURE menu
FEATURES menu
MENU
PICTURE FEATURES menu
MENU
CHILD LOCK
VNR
OFF TIMER
OFF
VNR is turned off.
You can set the TV to turn off automatically to standby mode after
a set time.
Press the OFF TIMER button to select a desired period of time.
AUTO
MIN
MAX
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
OFF TIMER
If you select MAX, the picture becomes softer even if the original
picture is sharp.
0
120
You can set the period of time
to a maximum of 120 minutes
in 10 minutes step.
10
LANGUAGE
You can choose your desired on screen display language.
BACK
I
Select the LANGUAGE in the INSTALL menu, then choose a
OK
language.
❇
To operate this function with a menu:
INSTALL menu
MENU
LANGUAGE
❇
FEATURES menu
MENU
OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER menu again to confirm or
change the remaining time.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting (continued)
EXT. INPUT (TV/VIDEO)
AUTO SHUTOFF
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
❇
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
INPUT menu
MENU
EXT. INPUT
OFF.
❇
MENU
INSTALL menu
AUTO SHUTOFF
DISPLAY
The AUTO SHUTOFF function does not turn off the TV’s main
power.
The AUTO SHUTOFF function is not available in video mode.
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON
OFF
PR LIST
VIDEO-2 SETTING
Choose a TV channel or a VIDEO terminal.
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
❇
MENU
INSTALL menu
VIDEO-2 SETTING
then press MENU/OK button.
PR LIST
VIDEO
If a normal video signal (composite video signal) is
input.
PR
AV
1
2
3
4
5
6
CH/CC
I
I
I
I
CH 03
CH 05
CH 07
CH 09
CC 04
CC 05
B
R
COMPONENT
If a component video signal (Y/C /C ) is input.
For connecting methods, see “Additional Preparation” on page
20.
.
-7 OK +7
.
To operate this function with a menu:
❇
INPUT menu
MENU
DISPLAY
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting
2 Choose EDIT/MANUAL, then press the MENU/OK button.
To register the TV channels automatically
EDIT menu appears.
You can register the TV channels into the TV’s channel list
automatically.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
1 Display the INSTALL menu.
❇
INSTALL menu
MENU
9
I
3
10
11
12
13
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
3 “SETUP TOUR RESTART?” appears.
.
To start the SETUP
TOUR
To skip the SETUP
TOUR
Press the MENU/OK button. Then proceed to
step 5 of “Setting up your TV” on page 8.
Press the Red button.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5 Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 12.
4 The EDIT menu appears.
To edit the channel
list
Proceed to the Step 3 of “To edit the channel
list (PR LIST)” on page 18.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears
If a channel is not
registered
To exit the menu
Proceed to the Step 3 of “To register the
TV channels manually” on this page.
Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
8 Press the MENU/OK button to exit the menu.
1 Display the INSTALL menu.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
❇
INSTALL menu
MENU
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
To add in the new channel
(INSERT in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be
changed.
You can add in the new channel in the TV channel list as you like.
You need to find the “CH/CC” number for the TV channel. Find the
“CH/CC” number corresponding to the channel number of the TV
channel from the attached sheet “CH/CC number list” on page 19.
1 Display the INSTALL menu.
❇
1 Display the INSTALL menu.
INSTALL menu
MENU
❇
INSTALL menu
MENU
2 Choose EDIT/MANUAL, then press the MENU/OK button.
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
EDIT menu appears.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
3 Choose the PR number for which you will register a new TV
channel. When you add a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to change the sound
system to M. Then proceed to the next step.
9
I
3
10
11
12
13
4 Press the green button, then press 5/∞ buttons to choose
“CC” or “CH”.
5 Press the number button to enter the remaining CH/CC
number.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
.
3 Choose the channel which you want to change PR number, or
delete.
The TV starts to search the TV channel, and the picture of the
TV channel appears. If the TV finds no TV channel, a noisy
picture appears.
4 Do the following action:
To change the PR
number (MOVE)
Press the 3 button. Then move it to the PR
number you want to use it for the channel.
Finally press the 2 button.
When a TV channel has already been registered in PR99, using
the INSERT function deletes that TV channel.
To delete the
Press the yellow button.
channel (DELETE)
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
5 Press the MENU/OK button to exit the menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
CH
US
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
CC
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
OIRT
AUSTRALIA
CH/CC number
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
When you want to use the INSERT
function on page 18, find the CH/CC
number corresponding to the channel
number of the TV channel from this table.
Channel No. Country
US
CCIR
United States, Philippines, etc..
Middle East, Southeast Asia,
etc..
U
V
W
OIRT
Eastern Europe, Russia,
Vietnam, etc..
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
AUSTRALIA
Channel
Australia, etc..
CH
US
CCIR
E2
OIRT
R1
AUSTRALIA
AU-0
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US-2
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
R2
R6
R7
R8
R9
R10
R11
R12
AU-10
AU-11
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CC
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AU-5A
X
Y
Z
Z+1
Z+2
S-9
R3
R4
R5
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
A
B
C
D
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
The illustrations shown in this section are for AV-29VS14 and
AV-21CS14 only, which are used for explanation purpose. Your
TV may not look exactly the same as illustrated.
Connecting to rear component/video input
terminal and output terminal
Rear of TV
AV-29VS14
Before connecting
VCR (for playing)
DVD player (composite signals)
COMPONENT
VIDEO-1
•
Read the manuals provided with the devices for the proper
(VIDEO-2)
INPUT
OUTPUT
INPUT
connection.
S
•
•
Turn off all the devices including the TV.
Note that connecting cables are not supplied.
VCR (for recording)
OVER
V
V
L
Y
/
V
L
/
L
/
CB
MONO
MONO
DVD player
(component video signals)
Connecting to front video input terminal
CR
R
R
R
AV-29VS14
Front of TV
Rear of TV
Camcorder or TV game
AV-21CS14
VIDEO-1
INPUT
R
V
L/MONO
MENU
OK
OUTPUT
IN (VIDEO-3)
VCR (for playing)
Headphones
AV-21CS14
V
L
V
L
MENU
V
L
IN (VIDEO-2)
/
MONO
R
OK
/
MONO
VCR (for recording)
R
R
When you use VIDEO-1 INPUT, you should choose to connect
S-VIDEO or video input. If S-VIDEO connector and video input
are connected at the same time, no picture displays on the
screen and the message “PLEASE DISCONNECT VIDEO-1
CABLE!” appears. In this case, you should disconnect either S-
VIDEO or video input.
When connecting to COMPONENT (VIDEO-2) input, depending
on the connection, choose the appropriate video input using the
menu (see page 16).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
• Cannot operate the
remote control
• The batteries may be exhausted. Replace with
new batteries (see page 7).
• Ensure that you are operating the remote less
than seven meters from the front of your TV.
• No picture,
no sound
• Deactivate the BLUE BACK function if it is turned
on.
• Choose the appropriate sound system. Refer to
“SOUND SYSTEM” on page 12.
• Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode and
try operating the menus.
• Cannot operate the
front control buttons
• Deactivate the CHILD LOCK function if it is turned
on (see page 15).
• Snowy picture
• Check the aerial cable and its connection with the
TV.
• TV is turned off
suddenly
• This may due to the AUTO SHUT OFF function is
activated. Press the POWER button to turn on the
TV.
• Stripes appear on • Interference occurs caused by other devices such
the picture
as an amplifier, personal computer, or a hair drier.
Move such devices away from your TV.
• Colour patches
appear at the corner
of the screen
• This may due to the magnetized device such as a
speaker near to your TV. Keep the device apart
from your TV. Alternately, you can also use the
magnetic-shielded speaker.
• Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use a better directionality
antenna.
• Picture is tilted
• This may due to the earth magnetism. Refer to
“PICTURE TILT” on page 11 to correct the tilt.
• Poor picture
• Choose the appropriate colour system. Refer to
“COLOUR SYSTEM” on page 9.
• Adjust the COLOUR or BRIGHT setting. Refer to
“Adjusting the picture - USER” on page 10.
• Image takes a short
period to be
displayed
• Image required time to stabilize before display.
This is not a malfunction.
• White and bright still • Inevitable phenomenon due to the nature of the
image look as if it
were coloured
• TV may emitted
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling sound
is too frequent, request your service technician for
inspection.
picture tube. This is not a malfunction.
• Top of the image
from software
products or video
tape is distorted
• This is due to the condition of the video signal
whereby the image was not recorded properly.
This is not a malfunction.
• Feel a slight electric
shock when
touching the TV
screen
• This is due to the static electricity of the picture
tube and it will not harm the human body. This is
not a malfunction.
• Poor sound
• Adjust the sound frequency properly. Refer to
“EQUALIZER” on page 13.
• Stereo or bilingual • TV channel reception is poor. Change the stereo/
sound is unclear bilingual mode to mono sound (see page 13).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV RF systems
B, G, I, D, K, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
VIDEO-1:
S-video input (Expect for AV-21CS14), VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input (Except for AV-21CS14)
VIDEO-3:
OUTPUT:
VIDEO input, AUDIO L/R input (Except for AV-21CS14)
VIDEO output, AUDIO L/R output
Headphone jack:
Stereo mini jack (3.5 mm diameter)
Sound-multiplex systems
A2 or NICAM (B/G, I, D/K)
Design and specifications subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
0604-FLE-JMT
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOUR TELEVISION
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture.............................................................. 9
Advanced setting for picture .....................................................11
Original features for picture...................................................... 12
Basic setting for sound............................................................. 14
Advanced setting for sound ..................................................... 15
Favorite channel and video setting .......................................... 16
Customized setting .................................................................. 17
TV channel presetting .............................................................. 19
Additional preparation .............................................................. 22
Troubleshooting ....................................................................... 23
Specifications ..............................................................Back cover
AV-29LS24
AV-29LX14
AV-29VS24
AV-29VX54
AV-29VX74
AV-29WX14
AV-29WX24
AV-25LS24
AV-25LX14
AV-25VS24
AV-25VX54
AV-25VX74
AV-21CS24
AV-21CX14
AV-21DX14
AV-21LX14
AV-21VS24
AV-21VX14
AV-21VX54
AV-21VX74
AV-21WS24
AV-21WX14
AV-21YX14
INSTRUCTIONS
GGT0045-001C-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF THIS TV.
7
8
If you are not going to use this TV for a long period of time, be sure to
disconnect the AC plug from the AC socket.
The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
1
2
Operate only from the power source indicated on the rear of the TV.
Avoid damaging the power cord and mains plug. When unplugging the
TV, grasp the mains plug. Do not pull on the power cord.
Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable.
WARNING: <AV-21WS24/AV-21WX14/AV-21YX14 only>
A REMOVABLE PLASTIC COVER IS FIXED TO THE
TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO
PREVENT THIS COVER FROM BEING ACCIDENTALLY
SWALLOWED BY BABIES OR CHILDREN, REMOVE IT
FROM THE TELEVISION AND STORE IT IN A SAFE
PLACE. IF THE COVER IS SWALLOWED SEEK THE
ADVICE OF A DOCTOR IMMEDIATELY.
3
When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
15 cm
10 cm
10 cm
15 cm
4
5
Do not allow objects or liquid into the cabinet openings.
In the event of a fault, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
6
The surface of the TV screen is easily damaged. Be very careful with it
when handling the TV. Should the TV screen become soiled, wipe it
with a soft dry cloth. Never rub it forcefully. Never use any cleaner or
detergent on it.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Knowing your TV’s features
Main features
PIP (Picture in Picture) You can view two different sources (e.g. TV programme and VCR sources) at the same
time.
4
TELETEXT
A2/NICAM
You can view teletext programmes which are broadcasted by some TV channels. Teletext
programme is an information in text form.
You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2
or NICAM Sound-multiplex system.
I
(STEREO / I II)
5
1
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI ECO
TV detects the brightness of your room and automatically adjust the picture brightness to a
suitable level for a better eye care.
AI VOLUME
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channel.
Confirm your TV’s functions
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The
model number is indicated at the rear of your TV. When you press a button concerned to a function that is
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is
not available for your TV, it is not displayed in the menu.
6
2
3
Model No.
No.
Function
I
1
2
3
(STEREO/I II)
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
_
–
_
–
_
–
_
–
_
–
–
–
–
–
–
–
–
–
–
–
–
_
–
*PICTURE BOOSTER
*ECO
_
_
_
_
_
–
_
–
–
_
_
_
PIP control buttons
(Green label)
4,6
5,6
–
–
–
–
–
–
–
–
_
_
–
–
–
–
–
–
_
_
_
_
–
–
–
–
–
–
TELETEXT control
buttons (Black label)
–
–
_
_
_
_
_
_
–
–
PICTURE TILT
_
_
_
_
–
–
_
_
–
_
_
_
_
_
_
–
–
–
–
_
_
–
–
–
–
–
–
COMPRESS (16:9)
_
_
_
_
_
_
_
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions
No. Press
To
1
2
3
4
5
6
7
POWER
MENU/OK
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
1
5 / ∞ / 2 / 3 Select and adjust menu function.
CHANNEL -/+ Select the desired channel number.
VOLUME -/+ Adjust the volume level.
TV/VIDEO
MUTING
8
2
6
3
7
Select TV or video terminal input.
Turn off the volume.
Press this button again to resume the volume.
8
DISPLAY
Display the programme number or video terminal number, stereo/bilingual broadcast system
and PR list (channel list) on the screen.
9
5
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
!
4
9
!
0~9, -/--
Select the programme number. For two digits programme number, press -/--, then press the
number button.
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
+
RETURN
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
Top menu
MENU INPUT
2nd menu
EXT. INPUT
DISPLAY
PICTURE MODE
PICTURE SETTING P.10
WHITE BALANCE P.10
Location 3rd menu
Location
P.18
P.18
P.9
–
–
–
–
–
–
To
Operation
Note
–
–
–
–
Display the MENU Press the MENU/OK button 2.
To exit the MENU,
press the DISPLAY
button 8 or choose
EXIT menu.
PICTURE
*If you want to
adjust PICTURE
SETTING menu,
you must set
PICTURE
–
VNR
P.17
Display the top
menu
Press 5/∞ buttons 3 to choose a Press ∞ button 3 to
menu title. Then press MENU/OK display the next page
FEATURES
FAVORITE CH SETTING P.16
VIDEO SETTING P.16
PICTURE MODE
menu to USER.
button 2.
for more functions.
COLOUR SYSTEM P.9
PICTURE BOOSTER P.10
COMPRESS (16:9) P.11
Display the 2nd
menu
Press 5/∞ buttons 3 to choose a
menu title. Then press MENU/OK
button 2.
PICTURE TILT
P.11
Display the 3rd
menu
Press 5/∞ buttons 3 to choose a
menu title. Then press MENU/OK
button 2.
I
SOUND
*If you want to
adjust
EQUALIZER
menu, you must
set SOUND
MODE menu to
USER.
STEREO/I II
P.15
P.15
P.14
P.15
P.14
P.14
–
–
–
–
–
–
–
–
–
–
–
AI VOLUME
SOUND MODE
EQUALIZER
BALANCE
SOUND TURBO
CINEMA SURROUND P.15
OFF TIMER
CHILD LOCK
AI ECO SENSOR P.11
–
–
–
–
–
–
–
–
–
Return to the
previous menu
Press the DISPLAY button 8.
–
Choose the setting Press 5/∞ buttons 3 to choose Press the MENU/OK
of a function
a function. Then press the 2/3
buttons 3 to change the setting. the menu.
button 2 to exit from
FEATURES
P.17
P.17
Adjust the effect
level of a function
Press 5/∞ buttons 3 to choose
a function. Then press the 2/3
buttons 3 to adjust the effect
level.
PIP
–
PIP,SUB INPUT,SWAP P.12
INSTALL
AUTO PROGRAM P.19
–
–
Display the sub
Press the 5/∞ buttons 3 to
EDIT/MANUAL
P.19
DELETE, MOVE,
MANUAL, INSERT P.20
LANGUAGE
P.19-
menu of a function. choose a function. Then press
MENU/OK button 2 to display
the sub menu.
–
LANGUAGE
BLUE BACK
AUTO SHUTOFF
P.17
P.11
P.18
P.17
–
–
–
–
–
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
–
–
–
VIDEO-2 SETTING P.18
AI ECO DISPLAY P.11
TEXT LANGUAGE P.13
2nd menu
2nd menu
MENU
MENU
Top menu
Top menu
3rd menu
TEXT LANGUAGE P.13
EXIT
–
–
–
–
Note: Some functions have the 4th menus as the sub-menus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TV buttons and functions
The illustrations shown below is for AV-29VS24 and AV-21CS24 only, which are used for explanation purpose.
Your TV may not look exactly the same as illustrated.
No. Button/terminal Description
Page
1
L (main power) Press to turn on or turn off the TV’s main power.
–
–
Front of the TV
2
POWER lamp
Indicate the TV is being turned on or off.
AV-29VS24
No colour : TV’s main power is being turned off.
!
9
8
7
6
5
43
2
1
Red
: TV’s main power is being turned on.
Note: When you turn off the power switch while TV is in standby
mode, the light of power lamp will be off in 10 -15 seconds.
POWER
V
L/MONO
R
MENU
OK
CHANNEL
VOLUME TV/VIDEO
EXIT
IN (VIDEO-3)
3
4
5
6
7
8
9
ECO sensor
–
Remote control sensor
–
–
TV/VIDEO
Press to select TV or video mode.
VOLUME -/+
CHANNEL -/+
MENU
IN (VIDEO-3)
IN (VIDEO-2)
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
–
–
–
AV-21CS24
!
9
8
7
6
4
2
1
MENU
CHANNEL
VOLUME
Video and audio input jacks for VIDEO-3 mode.
Video and audio input jacks for VIDEO-2 mode.
Headphone jack.
22
22
22
7
POWER
V
L
IN (VIDEO-2)
/
MONO
R
OK
!
"
#
Aerial socket.
Rear of the TV
OUTPUT
Video and audio output jacks. (The component video
signal cannot be output.)
22
AV-29VS24
AV-21CS24
$
%
COMPONENT
Video or component video, and audio input jacks for
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
the “VIDEO-2 SETTING” function (see page 18).
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1
mode
22
7
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
VIDEO-1
INPUT
OUTPUT
OUTPUT
INPUT
S
OVER
V
V
L
Y
V
L
V
L
/
V
How to operate the menus with the TV button
L
/
L
/
C
B
MONO
MONO
/
MONO
Work as same as the button on the
TV button
CR
R
R
R
R
R
Note
remote control unit
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
#
"
#
"
$
%
%
CHANNEL -/+ ∞/5 button
VOLUME -/+ 2/3 button
To select menu function.
To adjust the desired function.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
CAUTION
•
Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
2 Connecting the compatible main plug to the AC outlet.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
Rear of TV
VHF/UHF outdoor aerial
AV-29VS24
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
INPUT
OUTPUT
S
OVER
V
V
L
Y
/
V
L
L
CB
/
/
MONO
MONO
4 Turn on the TV by pressing the main power button.
CR
R
R
R
JVC logo appears on the screen.
To video
output
To audio
output
To RF
output
To S-video
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your
TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below:
LANGUAGE
TEXT LANGUAGE
AUTO PROGRAM
AUTO PROGRAM
EDIT
ENGLISH
êìëëäàâ
GROUP–1
GROUP–2
GROUP–3
GROUP–4
PR
7
8
CH/CC
CH 09
CH 11
CH 13
SETUP TOUR RESTART?
CH 12
22%
9
I
3
OK
RESTART
NO
10
11
12
13
FRANÇAIS
I
BACK
I
OK
BACK
I
BACK
I
IINSERT
IDELETE
IMANUAL
OK
OK
OK MOVE
• Press 5/∞ button to
select your desired
language*, then press
MENU/OK button.
• Press 5/∞ button to
select your desired
Teletext language
group*. For details,
see page 13.
(For CS24/LS24/
VS24/VX74/WS24/
WX24 series only)
• TV will start searching
for the channels.
• Press the red button to
cancel the SETUP TOUR
RESTART function.
If you want to make initial
settings again when the
next time you turn on the
TV, press the MENU/OK
button to activate the
SETUP TOUR RESTART
function.
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 19.
To stop AUTO
PROGRAM, press
MENU/OK button.
If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO PROGRAM functions to make the initial settings.
Those functions are located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
* If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/РУССКИЙ/
you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-4.
/
/FRANÇAIS,
If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/РУССКИЙ/
you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-3.
/MELAYU/INDONESIA,
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture
COLOUR SYSTEM
PICTURE MODE
You can select the appropriate colour system when the picture is
not clear or no colour appears.
You can choose the desired picture setting with one-touch.
Press the PICTURE MODE button to select a setting.
Press the COLOUR SYSTEM button to select a setting.
SOFT
Softens contrast and sharpness.
BRIGHT
STANDARD
USER
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting as you like.
Select USER and adjust following items in the
PICTURE SETTING menu. (CONTRAST, BRIGHT,
SHARP, COLOUR, TINT*)
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE FEATURES menu
*TINT can only be adjusted in NTSC system.
COLOUR SYSTEM
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE MODE
For the colour system in each country or region, see the table
below:
To return the USER setting to the default, press the blue button
when the PICTURE SETTING menu appears.
Area
Country or Region
System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
PAL
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
PAL
PAL
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
NTSC
SECAM
PAL
PAL
PAL
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
PAL
Egypt, Morocco, etc.
SECAM
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture (continued)
Adjusting the picture – USER
WHITE BALANCE
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
1 Select the USER in PICTURE MODE under PICTURE menu.
❇
PICTURE menu
MENU
USER
PICTURE MODE
❇
PICTURE menu
MENU
WHITE BALANCE
2 Select the PICTURE SETTING in PICTURE menu, then adjust
NORMAL
COOL
WARM
Normal white balance.
Bluish white.
Reddish white.
the setting.
❇
PICTURE menu
MENU
PICTURE SETTING
CONTRAST
BRIGHT
SHARP
COLOUR
TINT*
2 : Lower contrast
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due
to the low signal reception.
Press the PICTURE BOOSTER button to select the desired
mode.
HIGH
LOW
OFF
Perform at maximum level.
Perform at minimum level.
Cancel the function
To operate this function with a menu:
❇
PICTURE menu
MENU
PICTURE FEATURES menu
PICTURE BOOSTER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for picture
2 Press the 5/∞ buttons until the picture become level. Then
AI ECO SENSOR (ECO)
You can adjust TV screen contrast according to the brightness of
your room.
press the MENU/OK button.
Press the ECO button to select the desired mode.
COMPRESS (16:9)
1
2
Mild contrast (recommended).
Even contrast.
You can convert a normal picture (4:3 aspect ratio) into a wide
picture (16:9 aspect ratio).
OFF
Cancel the function.
Select the COMPRESS (16:9) in the PICTURE FEATURES menu
under PICTURE menu, then choose ON or OFF.
❇
To operate this function with a menu:
❇
FEATURES menu
MENU
AI ECO SENSOR
PICTURE menu
MENU
PICTURE FEATURES menu
You can display the graphic of AI ECO SENSOR on the screen.
Select the AI ECO DISPLAY in the INSTALL menu, then choose
COMPRESS (16:9)
ON or OFF.
❇
MENU
INSTALL menu
AI ECO DISPLAY
BLUE BACK
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent, or when there is
no input from an antenna.
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earth’s magnetic force.
1 Select the PICTURE TILT in the PICTURE FEATURES menu
Select the BLUE BACK in the INSTALL menu, then choose ON or
under PICTURE menu, then press MENU/OK button.
OFF.
❇
PICTURE menu
MENU
PICTURE FEATURES menu
❇
MENU
INSTALL menu
BLUE BACK
PICTURE TILT
If you wish to continue viewing the poor picture, cancel the BLUE
BACK function.
The following display appears.
PICTURE TILT
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
BACK
I
OK
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Original features for picture
When VIDEO-2 is set to component, if the input source of main
picture is set to VIDEO-2 with component, PIP button is disabled
and sub picture can’t be displayed.
PIP
You can display a sub picture on the screen.
Press the PIP operation buttons to display and change the sub
picture setting.
TELETEXT
PIP
Display the sub picture.
To cancel, press the PIP button again.
Notes:
• You can hear the sound from the main picture only.
• Main picture and sub picture will use different input
sources, which are TV and VIDEO mode.
When the same input source are selected, the sub
picture input source will change as follows:
Main picture Sub picture
You can watch the Teletext broadcast channel with TEXT function.
1 Press the TEXT button to select the desired mode as follows:
TV mode TEXT mode
MIX mode
2 Press the CHANNEL -/+ buttons, number buttons or colour
buttons to select other Teletext pages.
3 Press TEXT or TV/VIDEO button to return to TV mode.
You can also operate the teletext using the following buttons:
TV
VIDEO-1 = VIDEO-2 = VIDEO-3
TV=VIDEO-2=VIDEO-3
TV=VIDEO-1=VIDEO-3
TV=VIDEO-1=VIDEO-2
VIDEO-1
VIDEO-2
VIDEO-3
(Hold)
Hold a teletext page.
The
(Hold) are displayed at the top left of the screen.
To cancel, press
(Hold) button again.
SUB-P -/+
(Input)
Select the desired channel for sub picture.
Select the input source for the sub picture.
Swap between the main picture and sub picture.
Change the sub picture position.
Each time you press on
picture position will change as follows:
(Reveal)
Display the hidden text (e.g. answers to a quiz).
To cancel, press (Reveal) button again.
(Swap)
(Size)
Enlarge the teletext display.
(Index)
(Cancel)
Return to the index page instantly.
(Position)
(Position) button, the sub
Watch TV programme while waiting for a teletext page.
When the teletext page is found, a page number
appears at the upper left of the screen.
lower right
lower left
upper left
Press
(Cancel) to view the teletext page.
upper right
(Sub-page)
Operate the
(Sub-page) function.
(Freeze)
Freeze the sub picture to be still.
Sub-page numbers are displayed at the left of the
screen.
To operate this function with a menu:
To cancel sub-page function, press
button again.
(Sub-page)
❇
FEATURES menu
MENU
PIP
When VIDEO-2 is set to component, you can’t select VIDEO-2 for
sub picture.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Original features for picture (continued)
Using the List mode
You can store and recall the favorite teletext pages in memory
using the colour buttons.
1 In TEXT mode, press the MODE button to enter the List mode.
TEXT LANGUAGE
You can set the Teletext language group that corresponds to the
programmes.
Select TEXT LANGUAGE in the INSTALL menu, then choose the
desired language group.
2 Press a colour button, then press the number buttons to enter
the page number.
3 Press and hold down the
❇
MENU
INSTALL menu
TEXT LANGUAGE
(Store) button.
GROUP-1
English, German, Swedish / Finnish / Danish /
Hungarian, Italian, French, Spanish / Portuguese,
Turkish
The page number is blinking white to indicate that they are
stored in memory.
4 To store other favorite teletext pages, repeat Step 2 to 3.
To recall the favorite teletext page, press the MODE button, then
press the colour button.
To exit the List mode, press the MODE button again.
When viewing teletext programme, menu operations are not available.
If characters on a teletext programme do not appear properly,
change the TEXT LANGUAGE setting.
GROUP-2
Polish, German, Estonian, Slovenian, Czech /
Slovakian, Rumanian
GROUP-3
GROUP-4
Polish, German, Estonian, Lettish, Russian, Ukrainian
English, French, Turkish, Arabic, Iranian
Depending on the broadcast, the language set may not display
properly. For details, see in page 8.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for sound
SOUND SYSTEM
SOUND MODE
You can select an appropriate sound system when abnormal
sound occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the
setting.
❇
B/G
I
D/K
M
MENU
SOUND menu
SOUND MODE
USER
You can change this sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz).
For details, see “EQUALIZER” on page 15.
Emphasize on both vocal sound and music.
Emphasize on music effect.
This function is not available in video mode.
For the sound system in each country or region, see the table
below:
Area
Country or Region
System
DYNAMIC
MUSIC
NEWS
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
B/G
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Emphasize on vocal sound.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
D/K
I
BALANCE
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
M
You can adjust the volume balance between the left and right
speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
D/K
D/K
B/G
I
Europe
❇
MENU
SOUND menu
BALANCE
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
I
B/G
B/G
SOUND TURBO
Egypt, Morocco, etc.
You can set the sound frequency to emphasize the low and high
frequency levels.
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
❇
MENU
SOUND menu
SOUND TURBO
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for sound
CINEMA SURROUND
EQUALIZER
You can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.
You can adjust the sound frequencies when selecting USER
mode in SOUND MODE.
OFF
Cancel the function.
1 Select the USER in SOUND MODE under SOUND menu.
❇
LOW
HIGH
MONO
Listen to sound with less wider audience effect.
Listen to sound with more wider audience effect.
Listen to mono sound with stereo effect.
SOUND menu
MENU
SOUND MODE
USER
2 Select the EQUALIZER in SOUND menu.
❇
MENU
SOUND menu
EQUALIZER
To operate this function with a menu:
The following display appears.
❇
MENU
SOUND menu
CINEMA SURROUND
EQUALIZER
If slight volume distortion occurs when you select HIGH mode,
change the setting to LOW mode. The CINEMA SURROUND
effect will be less noticeable.
If you use CINEMA SURROUND and SOUND TURBO together,
volume distortion might occurs.
100 300
1K
3K
8K Hz
BACK
I
OK
I
STEREO / I II (
)
3 Select and adjust the desired frequencies.
4 Press the MENU/OK button to exit the menu.
You can enjoy the stereo and bilingual broadcasted programmes.
Press the
button to select the desired mode.
Adjust high frequency will affect higher pitch sound and vice versa.
Select stereo sound.
Select monaural sound.
Select bilingual I (sub I).
AI VOLUME
I
II
Select bilingual II (sub II).
Cancels the Multi Sound function, and the sound
becomes monaural.
You can adjust the volume of all the channels and video inputs to
the same level automatically.
Select the AI VOLUME in SOUND menu, then choose ON or OFF.
MONO
This function is not available in video mode.
To operate this function with a menu:
❇
SOUND menu
MENU
AI VOLUME
❇
I
SOUND menu
MENU
STEREO / I II
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite channel and video setting
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
To register the favorite channel
You can register and recall 4 favorite channels by using the
colour buttons (red, green, yellow, blue).
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
1 In TV mode, select a TV channel (PR01-99) you desired to register.
5 Press the MENU/OK button to exit the menu.
2 Press and hold a colour button for 3 seconds or more.
“FAVORITE CHANNEL I PROGRAMMED” appears on the
screen and current channel is registered.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture and sound settings for video inputs.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the colour button.
When the TV is in Text mode, Picture in Picture or menu mode,
favorite channel function is not available.
1 Display the PICTURE menu and select VIDEO SETTING in
PICTURE FEATURES menu.
❇
MENU
PICTURE menu
PICTURE FEATURES menu
VIDEO SETTING
To adjust favorite channel setting
(FAVORITE CH SETTING)
2 Select VIDEO STATUS in VIDEO SETTING menu, then
choose the desired video input.
❇
VIDEO SETTING
VIDEO STATUS
You can adjust the picture and sound settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH
SETTING in PICTURE FEATURES menu.
VIDEO SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
VIDEO STATUS
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
VIDEO-1
❇
MENU
PICTURE menu
PICTURE FEATURES menu
To cancel the settings, choose OFF.
FAVORITE CH SETTING
SOUND MODE
EFFECT
USER
ON
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING
menu, then choose the desired favorite channel.
BACK
I
IRESET
OK
❇
FAVORITE CH SETTING
FAVORITE CHANNEL
3 Select EFFECT, then press 2/3 button
to choose ON.
FAVORITE CH SETTING
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
FAVORITE CHANNEL
CONTRAST
BRIGHT
I
PR 01
To cancel the settings, choose OFF.
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
SHARP
COLOUR
TINT
SOUND MODE
EFFECT
5 Press the MENU/OK button to exit the menu.
USER
ON
BACK
I
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
OK
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting
VNR
CHILD LOCK
You can reduce the noise.
You can disable the front control buttons of the TV.
Select the VNR in the PICTURE FEATURES menu under
Select the CHILD LOCK in the FEATURES menu, then choose
PICTURE menu, then choose a setting of VNR function.
ON or OFF.
❇
❇
PICTURE menu
FEATURES menu
MENU
PICTURE FEATURES menu
MENU
CHILD LOCK
VNR
OFF TIMER
OFF
VNR is turned off.
You can set the TV to turn off automatically to standby mode after
a set time.
Press the OFF TIMER button to select a desired period of time.
AUTO
MIN
MAX
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
OFF TIMER
If you select MAX, the picture becomes softer even if the original
picture is sharp.
0
120
You can set the period of time
to a maximum of 120 minutes
in 10 minutes step.
10
LANGUAGE
You can choose your desired on screen display language.
BACK
I
Select the LANGUAGE in the INSTALL menu, then choose a
OK
language.
❇
To operate this function with a menu:
INSTALL menu
MENU
LANGUAGE
❇
FEATURES menu
MENU
OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER menu again to confirm or
change the remaining time.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting (continued)
AUTO SHUTOFF
EXT. INPUT (TV/VIDEO)
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
❇
INPUT menu
MENU
EXT. INPUT
OFF.
❇
MENU
INSTALL menu
AUTO SHUTOFF
DISPLAY
The AUTO SHUTOFF function does not turn off the TV’s main
power.
The AUTO SHUTOFF function is not available in video mode.
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON
OFF
PR LIST
VIDEO-2 SETTING
You can set the VIDEO-2 SETTING according to the video signal
Choose a TV channel or a VIDEO terminal.
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
❇
MENU
INSTALL menu
VIDEO-2 SETTING
then press MENU/OK button.
PR LIST
VIDEO
If a normal video signal (composite video signal) is
input.
PR
AV
1
2
3
4
5
6
CH/CC
CH 03
CH 05
CH 07
CH 09
CC 04
CC 05
B
R
COMPONENT
If a component video signal (Y/C /C ) is input.
For connecting methods, see “Additional Preparation” on page 22.
-7 OK +7
To operate this function with a menu:
❇
INPUT menu
MENU
DISPLAY
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting
2 Choose EDIT/MANUAL, then press the MENU/OK button.
To register the TV channels automatically
EDIT menu appears.
You can register the TV channels into the TV’s channel list
automatically.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
1 Display the INSTALL menu.
❇
INSTALL menu
MENU
9
I
3
10
11
12
13
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR LIST) automatically.
3 “SETUP TOUR RESTART?” appears.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
To start the SETUP
TOUR
To skip the SETUP
TOUR
Press the MENU/OK button. Then proceed to
step 5 of “Setting up your TV” on page 8.
Press the Red button.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5 Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 14.
4 The EDIT menu appears.
To edit the channel
list
Proceed to the Step 3 of “To edit the channel
list (PR LIST)” on page 20.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears.
If a channel is not
registered
To exit the menu
Proceed to the Step 3 of “To register the TV
channels manually” on this page.
Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
8 Press the MENU/OK button to exit the menu.
1 Display the INSTALL menu.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
❇
INSTALL menu
MENU
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
To add in the new channel
(INSERT in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be
changed.
You can add in the new channel in the TV channel list as you like.
You need to find the “CH/CC” number for the TV channel. Find the
“CH/CC” number corresponding to the channel number of the TV
channel from the attached sheet “CH/CC number list” on page 21.
1 Display the INSTALL menu.
❇
1 Display the INSTALL menu.
INSTALL menu
MENU
❇
INSTALL menu
MENU
2 Choose EDIT/MANUAL, then press the MENU/OK button.
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
EDIT menu appears.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
3 Choose the PR number for which you will register a new TV
channel. When you add a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to change the sound
system to M. Then proceed to the next step.
9
I
3
10
11
12
13
4 Press the green button, then press 5/∞ buttons to choose
“CC” or “CH”.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
5 Press the number button to enter the remaining CH/CC
number.
3 Choose the channel which you want to change PR number, or
delete.
The TV starts to search the TV channel, and the picture of the
TV channel appears. If the TV finds no TV channel, a noisy
picture appears.
4 Do the following action:
To change the PR
number (MOVE)
Press the 3 button. Then move it to the PR
number you want to use it for the channel.
Finally press the 2 button.
When a TV channel has already been registered in PR99, using
the INSERT function deletes that TV channel.
To delete the
Press the yellow button.
channel (DELETE)
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
5 Press the MENU/OK button to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
CH
US
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
CC
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
OIRT
AUSTRALIA
CH/CC number
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
When you want to use the INSERT
function on page 20, find the CH/CC
number corresponding to the channel
number of the TV channel from this table.
Channel No. Country
US
CCIR
United States, Philippines, etc..
Middle East, Southeast Asia,
etc..
U
V
W
OIRT
Eastern Europe, Russia,
Vietnam, etc..
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
AUSTRALIA
Channel
Australia, etc..
CH
US
CCIR
E2
OIRT
R1
AUSTRALIA
AU-0
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US-2
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
R2
R6
R7
R8
R9
R10
R11
R12
AU-10
AU-11
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CC
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AU-5A
X
Y
Z
Z+1
Z+2
S-9
R3
R4
R5
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
A
B
C
D
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
The illustrations shown in this section are for AV-29VS24 and
AV-21CS24 only, which are used for explanation purpose. Your
TV may not look exactly the same as illustrated.
Connecting to rear component/video input
terminal and output terminal
Rear of TV
AV-29VS24
Before connecting
VCR (for playing)
DVD player (composite signals)
COMPONENT
VIDEO-1
•
Read the manuals provided with the devices for the proper
(VIDEO-2)
INPUT
OUTPUT
INPUT
connection.
S
•
•
Turn off all the devices including the TV.
Note that connecting cables are not supplied.
VCR (for recording)
OVER
V
V
L
Y
/
V
L
/
L
/
CB
MONO
MONO
DVD player
(component video signals)
Connecting to front video input terminal
CR
R
R
R
AV-29VS24
Front of TV
Rear of TV
Camcorder or TV game
AV-21CS24
VIDEO-1
INPUT
R
V
L/MONO
MENU
OK
OUTPUT
IN (VIDEO-3)
VCR (for playing)
Headphones
AV-21CS24
V
L
V
L
MENU
V
L
IN (VIDEO-2)
/
MONO
R
OK
/
MONO
VCR (for recording)
R
R
When you use VIDEO-1 INPUT, you should choose to connect
S-VIDEO or video input. If S-VIDEO connector and video input
are connected at the same time, no picture displays on the
screen and the message “PLEASE DISCONNECT VIDEO-1
CABLE!” appears. In this case, you should disconnect either
S-VIDEO or video input.
When connecting to COMPONENT (VIDEO-2) input, depending
on the connection, choose the appropriate video input using the
menu (see page 18).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
• Cannot operate the
remote control
• The batteries may be exhausted. Replace with
new batteries (see page 7).
• Ensure that you are operating the remote less
than seven meters from the front of your TV.
• No picture,
no sound
• Deactivate the BLUE BACK function if it is turned
on.
• Choose the appropriate sound system. Refer to
“SOUND SYSTEM” on page 14.
• Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode and
try operating the menus.
• Cannot operate the
front control buttons
• Deactivate the CHILD LOCK function if it is turned
on (see page 17).
• Snowy picture
• Check the aerial cable and its connection with the
TV.
• TV is turned off
suddenly
• This may due to the AUTO SHUT OFF function is
activated. Press the POWER button to turn on the
TV.
• Stripes appear on • Interference occurs caused by other devices such
the picture
as an amplifier, personal computer, or a hair drier.
Move such devices away from your TV.
• Colour patches
appear at the corner
of the screen
• This may due to the magnetized device such as a
speaker near to your TV. Keep the device apart
from your TV. Alternately, you can also use the
magnetic-shielded speaker.
• Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use a better directionality
antenna.
• Picture is tilted
• This may due to the earth magnetism. Refer to
“PICTURE TILT” on page 11 to correct the tilt.
• Poor picture
• Choose the appropriate colour system. Refer to
“COLOUR SYSTEM” on page 9.
• Adjust the COLOUR or BRIGHT setting. Refer to
“Adjusting the picture - USER” on page 10.
• Image takes a short
period to be
displayed
• Image required time to stabilize before display.
This is not a malfunction.
• White and bright still • Inevitable phenomenon due to the nature of the
image look as if it
were coloured
• TV may emitted
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling sound
is too frequent, request your service technician for
inspection.
picture tube. This is not a malfunction.
• Top of the image
from software
products or video
tape is distorted
• This is due to the condition of the video signal
whereby the image was not recorded properly.
This is not a malfunction.
• Feel a slight electric
shock when
touching the TV
screen
• This is due to the static electricity of the picture
tube and it will not harm the human body. This is
not a malfunction.
• Poor sound
• Adjust the sound frequency properly. Refer to
“EQUALIZER” on page 15.
• Stereo or bilingual • TV channel reception is poor. Change the stereo/
sound is unclear bilingual mode to mono sound (see page 15).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV RF systems
B, G, I, D, K, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
VIDEO-1:
S-video input*, VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input (Except for AV-21CS24/
AV-21CX14/AV-21YX14)
VIDEO-3:
OUTPUT:
VIDEO input, AUDIO L/R input (Except for AV-21CS24/AV-21CX14/AV-21YX14)
VIDEO output, AUDIO L/R output
Headphone jack:
Stereo mini jack (3.5 mm diameter)
*Except for AV-29LS24/AV-29LX14/AV-25LS24/AV-25LX14/AV-21CS24/AV-21CX14/AV-21DX14/AV-21LX14/AV-21YX14.
**Sound-multiplex systems
A2 or NICAM (B/G, I, D/K)
**Teletext system
FLOF (Fastext), WST (World Standard Text)
**Language displayed by teletext
Please see the table in the description “TEXT LANGUAGE” on page 13.
I
**Depends on the models, STEREO/I II function for the Sound-multiplex systems or Teletext function may not be available. Please
confirm with the chart on page 3.
Design and specifications subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED
0504-FLE-JMT
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOUR TELEVISION
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
Contents
Knowing your TV’s features ....................................................... 3
Remote control buttons and basic functions .............................. 4
TV buttons and functions ........................................................... 6
Setting up your TV ..................................................................... 7
Basic setting for picture.............................................................. 9
Advanced setting for picture .....................................................11
Original features for picture...................................................... 12
Basic setting for sound............................................................. 14
Advanced setting for sound ..................................................... 15
Favorite channel and video setting .......................................... 16
Customized setting .................................................................. 17
TV channel presetting .............................................................. 19
Additional preparation .............................................................. 22
Troubleshooting ....................................................................... 23
Specifications ..............................................................Back cover
AV-2934LE
AV-2934WE
AV-2953WE
AV-2954WE
AV-2983VE
AV-2984VE
AV-29LS24
AV-2534LE
AV-2553LE
AV-2554LE
AV-2583VE
AV-2584VE
AV-25LS24
AV-2134YE
AV-2134WE
AV-2144LE
AV-2153WE
AV-2154CE
AV-2154LE
AV-2154WE
AV-2174VE
AV-2184VE
AV-2183VE
INSTRUCTIONS
GGT0050-001C-H
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF THIS TV.
7
8
If you are not going to use this TV for a long period of time, be sure to
disconnect the AC plug from the AC socket.
The apparatus shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
apparatus.
1
2
Operate only from the power source indicated on the rear of the TV.
Avoid damaging the power cord and mains plug. When unplugging the
TV, grasp the mains plug. Do not pull on the power cord.
Never block or cover the ventilation openings.
Never install the TV where good ventilation is unattainable.
WARNING: <AV-2134YE/AV-2134WE/AV-2153WE/AV-2154WE only>
A REMOVABLE PLASTIC COVER IS FIXED TO THE
TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO
PREVENT THIS COVER FROM BEING ACCIDENTALLY
SWALLOWED BY BABIES OR CHILDREN, REMOVE IT
FROM THE TELEVISION AND STORE IT IN A SAFE
PLACE. IF THE COVER IS SWALLOWED SEEK THE
ADVICE OF A DOCTOR IMMEDIATELY.
3
When installing this TV, leave spaces for ventilation around the TV of
more than the minimum distances as shown.
15 cm
10 cm
10 cm
15 cm
4
5
Do not allow objects or liquid into the cabinet openings.
In the event of a fault, unplug the unit and call a service technician. Do
not attempt to repair it yourself or remove the rear cover.
6
The surface of the TV screen is easily damaged. Be very careful with it
when handling the TV. Should the TV screen become soiled, wipe it
with a soft dry cloth. Never rub it forcefully. Never use any cleaner or
detergent on it.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Knowing your TV’s features
Main features
PIP (Picture in Picture) You can view two different sources (e.g. TV programme and VCR sources) at the same
time.
4
TELETEXT
A2/NICAM
You can view teletext programmes which are broadcasted by some TV channels. Teletext
programme is an information in text form.
You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2
or NICAM Sound-multiplex system.
I
(STEREO / I II)
5
1
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.
AI ECO
TV detects the brightness of your room and automatically adjust the picture brightness to a
suitable level for a better eye care.
AI VOLUME
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden
change of the volume when selecting different TV channel.
Confirm your TV’s functions
6
Some functions written in this instruction manual may not be available for your TV.
Please see the chart below and check the functions that are equipped for your TV’s model number. The
model number is indicated at the rear of your TV. When you press a button concerned to a function that is
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is
not available for your TV, it is not displayed in the menu.
2
3
Model No.
No.
Function
I
(STEREO/I II)
_
–
_
–
_
–
–
–
_
–
_
–
_
–
_
–
–
–
–
–
–
–
–
–
–
–
–
_
–
_
–
*PICTURE BOOSTER
*ECO
_
_
_
_
_
–
–
_
_
_
–
PIP control buttons
(Green label)
,
_
_
_
_
–
–
–
–
–
–
–
–
–
–
–
–
PICTURE TILT
_
_
–
–
–
_
_
–
–
–
–
_
_
_
_
–
–
–
–
_
_
COMPRESS (16:9)
_
_
_
_
_
_
_
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions
No. Press
POWER
MENU/OK
To
Turn on or off the TV from standby mode.
Display menu and confirm selected function.
5 / ∞ / 2 / 3 Select and adjust menu function.
CHANNEL -/+ Select the desired channel number.
VOLUME -/+ Adjust the volume level.
TV/VIDEO
MUTING
Select TV or video terminal input.
Turn off the volume.
Press this button again to resume the volume.
DISPLAY
Display the programme number or video terminal number, stereo/bilingual broadcast system
and PR list (channel list) on the screen.
You can select the channel using the PR list.
1 Press the DISPLAY button once to display the PR list.
2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.
You can confirm the favorite channels in the PR list. The channels set to favorite channels are
indicated with coloured mark.
0~9, -/--
Select the programme number. For two digits programme number, press -/--, then press the
number button.
+
RETURN
a) Return to the frequently view channel with one touch.
1 Choose the channel you want to register.
2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.
To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.
b) Return to the previously viewed channel, if you have not set or have cancelled the Return
channel as above.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control buttons and basic functions (continued)
How to operate menus and menus locations
Top menu
MENU INPUT
2nd menu
EXT. INPUT
DISPLAY
PICTURE MODE
PICTURE SETTING P.10
WHITE BALANCE P.10
Location 3rd menu
Location
P.18
P.18
P.9
–
–
–
–
–
–
To
Operation
Note
–
–
–
–
Display the MENU Press the MENU/OK button
.
To exit the MENU,
press the DISPLAY
PICTURE
*If you want to
adjust PICTURE
SETTING menu,
you must set
button
EXIT menu.
to choose a Press ∞ button
menu title. Then press MENU/OK display the next page
or choose
PICTURE
–
VNR
P.17
Display the top
menu
Press 5/∞ buttons
to
FEATURES
FAVORITE CH SETTING P.16
VIDEO SETTING P.16
COLOUR SYSTEM P.9
PICTURE BOOSTER P.10
COMPRESS (16:9) P.11
PICTURE MODE
menu to USER.
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press 5/∞ buttons
menu title. Then press MENU/OK
button
Press the DISPLAY button
.
for more functions.
Display the 2nd
menu
to choose a
.
PICTURE TILT
P.11
Display the 3rd
menu
to choose a
I
SOUND
*If you want to
adjust
EQUALIZER
menu, you must
set SOUND
MODE menu to
USER.
STEREO/I II
P.15
P.15
P.14
P.15
P.14
P.14
–
–
–
–
–
–
–
–
–
–
–
AI VOLUME
SOUND MODE
EQUALIZER
BALANCE
SOUND TURBO
CINEMA SURROUND P.15
OFF TIMER
CHILD LOCK
AI ECO SENSOR P.11
PIP
–
–
–
–
–
–
–
–
–
.
Return to the
previous menu
.
–
Choose the setting Press 5/∞ buttons
to choose Press the MENU/OK
of a function
a function. Then press the 2/3
button
to exit from
buttons
to change the setting. the menu.
FEATURES
P.17
P.17
Adjust the effect
level of a function
Press 5/∞ buttons
a function. Then press the 2/3
to choose
buttons
to adjust the effect
Press the 5/∞ buttons to
–
PIP,SUB INPUT,SWAP P.12
level.
INSTALL
AUTO PROGRAM P.19
EDIT/MANUAL
–
–
Display the sub
P.19
DELETE, MOVE,
MANUAL,INSERT P.20
P.19-
menu of a function. choose a function. Then press
–
MENU/OK buttons
the sub menu.
to display
LANGUAGE
BLUE BACK
AUTO SHUTOFF
VIDEO-2 SETTING P.18
AI ECO DISPLAY P.11
TEXT LANGUAGE P.13
P.17
P.11
P.18
LANGUAGE
P.17
–
–
–
–
–
The following chart shows locations of functions in menus. In this manual,
location of a function is described as follows:
–
–
–
2nd menu
2nd menu
MENU
MENU
Top menu
Top menu
3rd menu
TEXT LANGUAGE P.13
EXIT
–
–
–
–
Note: Some functions have the 4th menus as the sub-menus.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TV buttons and functions
The illustrations shown below is for AV-2934WE and
AV-2134YE only, which are used for explanation pur-
pose.
No. Button/terminal Description
Page
–
–
L (main power) Press to turn on or turn off the TV’s main power.
POWER lamp
Indicate the TV is being turned on or off.
No colour: TV’s main power is being turned off.
Your TV may not look exactly the same as illustrated.
Red :
TV’s main power is being turned on.
Front of the TV
Note: When you turn off the power switch while TV is in standby
mode, the light of power lamp will be off in 10 -15 seconds.
AV-2934WE
ECO sensor
Remote control sensor
–
–
–
–
–
!
9
8
7
6
5
43
2
1
TV/ VIDEO
VOLUME -/+
CHANNEL -/+
MENU
Press to select TV or video mode.
Press to adjust the volume level.
Press to select the desired channel.
Press to display the menu.
POWER
V
L/MONO
R
MENU
OK
CHANNEL
VOLUME TV/VIDEO
EXIT
IN (VIDEO-3)
–
IN (VIDEO-3)
IN (VIDEO-2)
Video and audio input jacks for VIDEO-3 mode.
Video and audio input jacks for VIDEO-2 mode.
Headphone jack.
22
22
22
7
AV-2134YE
!
9
8
7
6
4
&
2
1
Aerial socket.
OUTPUT
Video and audio output jacks. (The component video
signal cannot be output.)
Video or component video, and audio input jacks for
22
22
TIMER
POWER
V
L
/
MONO
IN (VIDEO-2)
R
MENU
OK
CHANNEL
VOLUME
COMPONENT
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting
the “VIDEO-2 SETTING” function (see page 18).
Rear of the TV
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1
mode
7
–
AV-2934WE
AV-2134YE
TIMER lamp
Indicate the OFF TIMER function is being turned on or off.
No colour: The OFF TIMER function is being turned off.
COMPONENT
(VIDEO-2)
INPUT
VIDEO-1
VIDEO-1
INPUT
OUTPUT
OUTPUT
INPUT
S
Orange :
The OFF TIMER function is being turned on.
OVER
V
How to operate the menus with the TV button
V
L
Y
V
L
V
L
/
V
Work as same as the button on the
TV button
Note
L
/
L
/
C
B
MONO
MONO
/
MONO
remote control unit
CR
R
R
R
R
R
MENU
MENU/OK button
To display main menu and exit
menu after finish setting.
CHANNEL -/+ ∞/5 button
VOLUME -/+ 2/3 button
To select menu function.
To adjust the desired function.
#
"
#
"
$
%
%
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
CAUTION
•
Turn off the equipment including the TV before connecting.
1 Connecting the aerial cable.
2 Connecting the compatible main plug to the AC outlet.
VHF/UHF outdoor aerial
75-ohm coaxial cable (not supplied)
If you connect a VCR, connect the aerial output jack of your VCR
and the aerial jack on the TV with the aerial cable. Then connect the
output jacks of your VCR and the VIDEO-1 input jacks of the TV
with the video cable (or S-VIDEO cable if available) and audio
cables. For details, see the manual of your VCR.
3 Inserting batteries into the remote control.
Insert two batteries by following the + and -
polarities and inserting the - end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• It the remote control does not work properly, fit
new batteries. The supplied batteries are for testing,
not regular use.
Rear of TV
VHF/UHF outdoor aerial
AV-2934WE
COMPONENT
VIDEO-1
(VIDEO-2)
OUTPUT
INPUT
INPUT
S
OVER
V
L
Y
V
L
/
V
L
CB
/
/
MONO
MONO
4 Turn on the TV by pressing the main power button.
CR
R
R
R
JVC logo appears on the screen.
To video
output
To audio
output
To RF
output
To S-video
output
VCR
To aerial input
The illustration shown is just a sample. It may not be same as your
TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV (continued)
5 Making the initial settings
Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below:
LANGUAGE
TEXT LANGUAGE
AUTO PROGRAM
AUTO PROGRAM
EDIT
ENGLISH
êìëëäàâ
ìäê
GROUP–1
GROUP–2
GROUP–3
PR
7
8
CH/CC
CH 09
CH 11
CH 13
SETUP TOUR RESTART?
CH 12
22%
.
9
I
3
OK
I
RESTART
NO
10
11
12
13
BACK
I
BACK
I
IINSERT
IDELETE
IMANUAL
BACK
I
OK
OK
OK MOVE
OK
.
• Press 5/∞ button to
select your desired
language*, then press
MENU/OK button.
• Press 5/∞ button to
select your desired
Teletext language
group. For details,
see page 13.
• TV will start searching
for the channels.
• Press the red button to
cancel the SETUP TOUR
RESTART function.
If you want to make initial
settings again when the
next time you turn on the
TV, press the MENU/OK
button to activate the
SETUP TOUR RESTART
function.
• To complete the initial
setting, press the
MENU/OK button. To
edit the channel list,
see page 19.
To stop AUTO
PROGRAM, press
MENU/OK button.
If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO PROGRAM functions to make the initial settings.
Those functions are located in the INSTALL menu.
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.
*For AV-25LS24/AV-29LS24, you can select your desired language as follow:
ENGLISH/РУССКИЙ/MM/MELAYU/INDONESIA
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture
PICTURE MODE
COLOUR SYSTEM
You can select the appropriate colour system when the picture is
not clear or no colour appears.
You can choose the desired picture setting with one-touch.
Press the PICTURE MODE button to select a setting.
Press the COLOUR SYSTEM button to select a setting.
SOFT
Softens contrast and sharpness.
BRIGHT
STANDARD
USER
Heightens contrast and sharpness.
Standard picture setting.
You can change this picture setting as you like.
Select USER and adjust following items in the
PICTURE SETTING menu. (CONTRAST, BRIGHT,
SHARP, COLOUR, TINT*)
AUTO
PAL
SECAM
NTSC3.58
NTSC4.43
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE FEATURES menu
*TINT can only be adjusted in NTSC system.
COLOUR SYSTEM
To operate this function with a menu:
❇
MENU
PICTURE menu
PICTURE MODE
For the colour system in each country or region, see the table
below:
To return the USER setting to the default, press the blue button
when the PICTURE SETTING menu appears.
Area
Country or Region
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
System
Yemen, etc.
PAL
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
PAL
PAL
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
NTSC
SECAM
PAL
PAL
PAL
Europe
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
PAL
PAL
PAL
Egypt, Morocco, etc.
SECAM
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for picture (continued)
Adjusting the picture – USER
WHITE BALANCE
You can adjust the desired picture setting when selecting USER
in PICTURE MODE.
You can change the white balance of the picture to better match
the type of video being viewed.
Select the WHITE BALANCE in the PICTURE menu, then choose
the desired setting.
1 Select the USER in PICTURE MODE under PICTURE menu.
❇
PICTURE menu
PICTURE MODE
MENU
USER
❇
PICTURE menu
MENU
WHITE BALANCE
2 Select the PICTURE SETTING in PICTURE menu, then adjust
NORMAL
COOL
WARM
Normal white balance.
Bluish white.
Reddish white.
the setting.
❇
PICTURE menu
PICTURE SETTING
MENU
CONTRAST
BRIGHT
SHARP
COLOUR
TINT*
2 : Lower contrast
2 : Darker
2 : Softer
2 : Lighter
2 : Reddish
3 : Higher contrast
3 : Brighter
3 : Higher
3 : Deeper
3 : Greenish
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
*TINT can only be adjusted in NTSC system.
PICTURE BOOSTER
You can improve picture clarity when the picture is unclear due
to the low signal reception.
Press the PICTURE BOOSTER button to select the desired
mode.
HIGH
LOW
OFF
Perform at maximum level.
Perform at minimum level.
Cancel the function
To operate this function with a menu:
❇
PICTURE menu
MENU
PICTURE FEATURES menu
PICTURE BOOSTER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for picture
2 Press the 5/∞ buttons until the picture become level. Then
AI ECO SENSOR (ECO)
You can adjust TV screen contrast according to the brightness of
your room.
press the MENU/OK button.
Press the ECO button to select the desired mode.
COMPRESS (16:9)
1
2
Mild contrast (recommended).
Even contrast.
You can convert a normal picture (4:3 aspect ratio) into a wide
picture (16:9 aspect ratio).
OFF
Cancel the function.
Select the COMPRESS (16:9) in the PICTURE FEATURES menu
under PICTURE menu, then choose ON or OFF.
❇
To operate this function with a menu:
❇
FEATURES menu
MENU
AI ECO SENSOR
PICTURE menu
MENU
PICTURE FEATURES menu
You can display the graphic of AI ECO SENSOR on the screen.
Select the AI ECO DISPLAY in the INSTALL menu, then choose
COMPRESS (16:9)
ON or OFF.
❇
MENU
INSTALL menu
AI ECO DISPLAY
BLUE BACK
You can set the TV to automatically change to a blue screen and
mute the sound if the signal is weak or absent, or when there is
no input from an antenna.
Correcting the Slanting Picture (PICTURE TILT)
You can correct the picture tilt caused by the earth’s magnetic force.
1 Select the PICTURE TILT in the PICTURE FEATURES menu
Select the BLUE BACK in the INSTALL menu, then choose ON or
under PICTURE menu, then press MENU/OK button.
OFF.
❇
PICTURE menu
MENU
PICTURE FEATURES menu
❇
MENU
INSTALL menu
BLUE BACK
PICTURE TILT
If you wish to continue viewing the poor picture, cancel the BLUE
BACK function.
The following display appears.
PICTURE TILT
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
BACK
I
OK
.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Original features for picture
When VIDEO-2 is set to component, if the input source of main
picture is set to VIDEO-2 with component, PIP button is disabled
and sub picture can’t be displayed.
PIP
You can display a sub picture on the screen.
Press the PIP operation buttons to display and change the sub
picture setting.
TELETEXT
PIP
Display the sub picture.
To cancel, press the PIP button again.
Notes:
• You can hear the sound from the main picture only.
• Main picture and sub picture will use different input
sources, which are TV and VIDEO mode.
When the same input source are selected, the sub
picture input source will change as follows:
Main picture Sub picture
You can watch the Teletext broadcast channel with TEXT function.
1
Press the TEXT button to select the desired mode as follows:
TV mode TEXT mode MIX mode
2
3
Press the CHANNEL -/+ buttons, number buttons or colour
buttons to select other Teletext pages.
Press TEXT or TV/VIDEO button to return to TV mode.
TV
VIDEO-1 = VIDEO-2 = VIDEO-3
TV=VIDEO-2=VIDEO-3
TV=VIDEO-1=VIDEO-3
TV=VIDEO-1=VIDEO-2
You can also operate the teletext using the following buttons:
VIDEO-1
VIDEO-2
VIDEO-3
(Hold)
Hold a teletext page.
The
(hold) are displayed at the top left of the screen.
To cancel, press
(Hold) button again.
SUB-P -/+
(Input)
Select the desired channel for sub picture.
Select the input source for the sub picture.
Swap between the main picture and sub picture.
Change the sub picture position.
Each time you press on
picture position will change as follows:
(Reveal)
Display the hidden text (e.g. answers to a quiz).
To cancel, press (Reveal) button again.
(Swap)
(Size)
Enlarge the teletext display.
(Index)
(Cancel)
Return to the index page instantly.
(Position)
(Position) button, the sub
Watch TV programme while waiting for a teletext page.
When the teletext page is found, a page number
appears at the upper left of the screen.
lower right
lower left
upper left
Press
(Cancel) to view the teletext page.
upper right
(Sub-page)
Operate the
(Sub-page) function.
(Freeze)
Freeze the sub picture to be still.
Sub-page numbers are displayed at the left of the
screen.
To operate this function with a menu:
To cancel sub-page function, press
button again.
(Sub-page)
❇
FEATURES menu
MENU
PIP
When VIDEO-2 is set to component, you can’t select VIDEO-2
for sub picture.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Original features for picture (continued)
Using the List mode
You can store and recall the favorite teletext pages in memory
using the colour buttons.
1 In TEXT mode, press the MODE button to enter the List mode.
TEXT LANGUAGE
You can set the Teletext language group that corresponds to the
programmes.
Select TEXT LANGUAGE in the INSTALL menu, then choose the
desired language group.
2 Press a colour button, then press the number buttons to enter
the page number.
3 Press and hold down the
❇
INSTALL menu
MENU
TEXT LANGUAGE
(Store) button.
GROUP-1
English, German, Swedish / Finnish / Danish / Hungar-
ian, Italian, French, Spanish / Portuguese, Turkish
Polish, German, Estonian, Slovenian, Czech /
Slovakian, Rumanian
The page number is blinking white to indicate that they are
stored in memory.
GROUP-2
GROUP-3
4 To store other favorite teletext pages, repeat Step 2 to 3.
To recall the favorite teletext page, press the MODE button, then
press the colour button.
To exit the List mode, press the MODE button again.
When viewing teletext programme, menu operations are not available.
If characters on a teletext programme do not appear properly,
change the TEXT LANGUAGE setting.
Polish, German, Estonian, Lettish, Russian, Ukrainian
Depending on the broadcast, the language set may not display
properly.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic setting for sound
SOUND MODE
SOUND SYSTEM
You can select an appropriate sound system when abnormal
sound occurs even when the picture appears normally.
Press the SOUND SYSTEM button to select a setting.
You can choose the desired sound setting.
Select the SOUND MODE in SOUND menu, then choose the
setting.
❇
B/G
I
D/K
M
MENU
SOUND menu
SOUND MODE
USER
You can change this sound setting as you like.
Select USER and adjust the frequencies in EQUALIZER
(100, 300, 1K, 3K, 8K Hz).
For details, see “EQUALIZER” on page 15.
Emphasize on both vocal sound and music.
Emphasize on music effect.
This function is not available in video mode.
For the sound system in each country or region, see the table
below:
Area
Country or Region
System
DYNAMIC
MUSIC
NEWS
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, etc.
B/G
Indonesia, Malaysia, Singapore, Thailand, India, etc.
Emphasize on vocal sound.
Asia, Middle
East
China, Vietnam, etc.
Hong Kong, etc.
D/K
I
BALANCE
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
M
You can adjust the volume balance between the left and right
speakers.
Select the BALANCE in SOUND menu, then adjust the setting.
D/K
D/K
B/G
I
Europe
❇
MENU
SOUND menu
BALANCE
Oceania
Africa
Australia, New Zealand, etc.
Republic of South Africa, etc.
Nigeria, etc.
B/G
I
B/G
B/G
SOUND TURBO
Egypt, Morocco, etc.
You can set the sound frequency to emphasize the low and high
frequency levels.
Press the SOUND TURBO to select ON or OFF.
To operate this function with a menu:
❇
SOUND menu
MENU
SOUND TURBO
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced setting for sound
CINEMA SURROUND
EQUALIZER
You can enjoy an enhanced sound for wider audience.
Press the CINEMA SURROUND button to select a setting.
You can adjust the sound frequencies when selecting USER
mode in SOUND MODE.
OFF
Cancel the function.
1 Select the USER in SOUND MODE under SOUND menu.
❇
LOW
HIGH
MONO
Listen to sound with less wider audience effect.
Listen to sound with more wider audience effect.
Listen to mono sound with stereo effect.
SOUND menu
MENU
SOUND MODE
USER
2 Select the EQUALIZER in SOUND menu.
❇
MENU
SOUND menu
EQUALIZER
To operate this function with a menu:
The following display appears.
❇
SOUND menu
MENU
CINEMA SURROUND
EQUALIZER
If slight volume distortion occurs when you select HIGH mode,
change the setting to LOW mode. The CINEMA SURROUND
effect will be less noticeable.
100 300
1K
3K
8K Hz
If you use CINEMA SURROUND and SOUND TURBO together,
volume distortion might occurs.
BACK
I
OK
.
I
STEREO / I II (
)
3 Select and adjust the desired frequencies.
4 Press the MENU/OK button to exit the menu.
You can enjoy the stereo and bilingual broadcasted programmes.
Press the
button to select the desired mode.
Adjust high frequency will affect higher pitch sound and vice versa.
Select stereo sound.
Select monaural sound.
Select bilingual I (sub I).
AI VOLUME
I
II
You can adjust the volume of all the channels and video inputs to
the same level automatically.
Select the AI VOLUME in SOUND menu, then choose ON or OFF.
Select bilingual II (sub II).
Cancels the Multi Sound function, and the sound
becomes monaural.
MONO
❇
SOUND menu
This function is not available in video mode.
To operate this function with a menu:
MENU
AI VOLUME
❇
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
I
SOUND menu
MENU
STEREO / I II
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite channel and video setting
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
To register the favorite channel
You can register and recall 4 favorite channels by using the
colour buttons (red, green, yellow, blue).
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
1 In TV mode, select a TV channel (PR01-99) you desired to register.
5 Press the MENU/OK button to exit the menu.
2 Press and hold a colour button for 3 seconds or more.
“FAVORITE CHANNEL I PROGRAMMED!” appears on the
screen and current channel is registered.
To adjust the video setting (VIDEO SETTING)
You can adjust the picture and sound settings for video inputs.
3 To register other favorite channels, repeat Step 1 to 2.
To recall the favorite channel, press the colour button.
When the TV is in Text mode, Picture in Picture or menu mode,
favorite channel function is not available.
1 Display the PICTURE menu and select VIDEO SETTING in
PICTURE FEATURES menu.
❇
MENU
PICTURE menu
PICTURE FEATURES menu
VIDEO SETTING
To adjust favorite channel setting
(FAVORITE CH SETTING)
2 Select VIDEO STATUS in VIDEO SETTING menu, then
choose the desired video input.
❇
VIDEO SETTING
VIDEO STATUS
You can adjust the picture and sound settings for the favorite channels.
1 Display the PICTURE menu and select FAVORITE CH
SETTING in PICTURE FEATURES menu.
VIDEO SETTING
3 Select EFFECT, then press 2/3 button
to choose ON.
VIDEO STATUS
CONTRAST
BRIGHT
SHARP
COLOUR
TINT
VIDEO-1
❇
MENU
PICTURE menu
PICTURE FEATURES menu
To cancel the settings, choose OFF.
FAVORITE CH SETTING
SOUND MODE
EFFECT
USER
ON
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING
menu, then choose the desired favorite channel.
BACK
I
IRESET
OK
❇
FAVORITE CH SETTING
FAVORITE CHANNEL
3 Select EFFECT, then press 2/3 button
to choose ON.
FAVORITE CH SETTING
4 Select the desired item that you wish to adjust.
CONTRAST BRIGHT SHARP COLOUR
FAVORITE CHANNEL
CONTRAST
BRIGHT
I
PR 01
To cancel the settings, choose OFF.
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)
TINT
SHARP
COLOUR
TINT
SOUND MODE
EFFECT
5 Press the MENU/OK button to exit the menu.
USER
ON
BACK
I
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
OK
.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting
VNR
CHILD LOCK
You can reduce the noise.
You can disable the front control buttons of the TV.
Select the VNR in the PICTURE FEATURES menu under
Select the CHILD LOCK in the FEATURES menu, then choose
PICTURE menu, then choose a setting of VNR function.
ON or OFF.
❇
❇
PICTURE menu
FEATURES menu
MENU
PICTURE FEATURES menu
MENU
CHILD LOCK
VNR
OFF TIMER
OFF
VNR is turned off.
You can set the TV to turn off automatically to standby mode after
a set time.
Press the OFF TIMER button to select a desired period of time.
AUTO
MIN
MAX
Effect of VNR is automatically controlled.
Effect of VNR becomes minimum level.
Effect of VNR becomes maximum level.
OFF TIMER
If you select MAX, the picture becomes softer even if the original
picture is sharp.
0
120
You can set the period of time
to a maximum of 120 minutes
in 10 minutes step.
10
LANGUAGE
You can choose your desired on screen display language.
BACK
I
Select the LANGUAGE in the INSTALL menu, then choose a
OK
language.
.
❇
To operate this function with a menu:
INSTALL menu
MENU
LANGUAGE
❇
FEATURES menu
MENU
OFF TIMER
When the elapsed of time left one minute, “GOOD NIGHT!”
appears on the screen.
You can display the OFF TIMER menu again to confirm or
change the remaining time.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Customized setting (continued)
EXT. INPUT (TV/VIDEO)
AUTO SHUTOFF
You can select TV or video terminal input with one touch.
Press the TV/VIDEO button to select an input.
To operate this function with a menu:
You can set the TV to turn off automatically when no signal is
received for about 15 minutes or longer after the end of a
broadcast.
Select AUTO SHUTOFF in INSTALL menu, then choose ON or
❇
INPUT menu
MENU
EXT. INPUT
OFF.
❇
MENU
INSTALL menu
AUTO SHUTOFF
DISPLAY
The AUTO SHUTOFF function does not turn off the TV’s main
power.
The AUTO SHUTOFF function is not available in video mode.
You can display the programme number, video terminal number
and PR list on the screen.
Press the DISPLAY button to select the desired mode:
ON
OFF
PR LIST
VIDEO-2 SETTING
Choose a TV channel or a VIDEO terminal.
1 Press the DISPLAY button to display the PR LIST.
2 Select a programme number or video terminal by pressing the
5/∞ button to move up/down on the programme number or
press the 2/3 button to skip for each 7 programme numbers,
You can set the VIDEO-2 SETTING according to the video signal
output from the external devices connected to the VIDEO-2
terminal.
Select the VIDEO-2 SETTING in INSTALL menu, then choose a
setting.
❇
MENU
INSTALL menu
VIDEO-2 SETTING
then press MENU/OK button.
PR LIST
PR
AV
1
2
3
4
5
6
CH/CC
VIDEO
If a normal video signal (composite video signal) is
input.
I
I
I
I
CH 03
CH 05
CH 07
CH 09
CC 04
CC 05
B
R
COMPONENT
If a component video signal (Y/C /C ) is input.
For connecting methods, see “Additional Preparation” on page
.
22.
-7 OK +7
.
To operate this function with a menu:
❇
INPUT menu
MENU
DISPLAY
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting
2 Choose EDIT/MANUAL, then press the MENU/OK button.
To register the TV channels automatically
EDIT menu appears.
You can register the TV channels into the TV’s channel list
automatically.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
1 Display the INSTALL menu.
❇
INSTALL menu
MENU
9
I
3
10
11
12
13
2 Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
3 “SETUP TOUR RESTART?” appears.
.
To start the SETUP
TOUR
To skip the SETUP
TOUR
Press the MENU/OK button. Then proceed to
step 5 of “Setting up your TV” on page 8.
Press the Red button.
3 Choose the channel which you want to register.
4 Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5 Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 14.
4 The EDIT menu appears.
To edit the channel
list
Proceed to the Step 3 of “To edit the channel
list (PR LIST)” on page 20.
6 Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7 Repeat step 5 until your desired TV channel appears
If a channel is not
registered
To exit the menu
Proceed to the Step 3 of “To register the TV
channels manually” on this page.
Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
To register the TV channels manually
(MANUAL in the EDIT menu)
You can register the TV channels into the TV’s channel list manually.
8 Press the MENU/OK button to exit the menu.
1 Display the INSTALL menu.
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
❇
INSTALL menu
MENU
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
To edit the channel list (PR LIST)
(MOVE and DELETE in the EDIT menu)
To add in the new channel
(INSERT in the EDIT menu)
You can edit the TV channel list as you like.
Note: After this operation, other channel’s PR numbers will be
changed.
You can add in the new channel in the TV channel list as you like.
You need to find the “CH/CC” number for the TV channel. Find the
“CH/CC” number corresponding to the channel number of the TV
channel from the attached sheet “CH/CC number list” on page 21.
1 Display the INSTALL menu.
❇
1 Display the INSTALL menu.
INSTALL menu
MENU
❇
INSTALL menu
MENU
2 Choose EDIT/MANUAL, then press the MENU/OK button.
2 Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
EDIT menu appears.
EDIT
PR
7
8
CH/CC
CH 09
CH 11
CH 13
3 Choose the PR number for which you will register a new TV
channel. When you add a new TV channel of NTSC-M system,
press the SOUND SYSTEM button to change the sound
system to M. Then proceed to the next step.
9
I
3
10
11
12
13
4 Press the green button, then press 5/∞ buttons to choose
“CC” or “CH”.
5 Press the number button to enter the remaining CH/CC
number.
BACK
I
IINSERT
IDELETE
IMANUAL
OK MOVE
.
3 Choose the channel which you want to change PR number, or
delete.
The TV starts to search the TV channel, and the picture of the
TV channel appears. If the TV finds no TV channel, a noisy
picture appears.
4 Do the following action:
To change the PR
number (MOVE)
Press the 3 button. Then move it to the PR
number you want to use it for the channel.
Finally press the 2 button.
When a TV channel has already been registered in PR99, using
the INSERT function deletes that TV channel.
To delete the
Press the yellow button.
channel (DELETE)
❇ About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
5 Press the MENU/OK button to exit the menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TV channel presetting (continued)
CH
US
CCIR
E33
E34
E35
E36
E37
E38
E39
E40
E41
E42
E43
E44
E45
E46
E47
E48
E49
E50
E51
E52
E53
E54
E55
E56
E57
E58
E59
E60
E61
E62
E63
E64
E65
E66
E67
E68
E69
OIRT
AUSTRALIA
CC
US
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR
S-18
S-19
S-20
S-21
S-22
S-23
S-24
S-25
S-26
S-27
S-28
S-29
S-30
S-31
S-32
S-33
S-34
S-35
S-36
S-37
S-38
S-39
S-40
S-41
OIRT
AUSTRALIA
CH/CC number
CH 33
CH 34
CH 35
CH 36
CH 37
CH 38
CH 39
CH 40
CH 41
CH 42
CH 43
CH 44
CH 45
CH 46
CH 47
CH 48
CH 49
CH 50
CH 51
CH 52
CH 53
CH 54
CH 55
CH 56
CH 57
CH 58
CH 59
CH 60
CH 61
CH 62
CH 63
CH 64
CH 65
CH 66
CH 67
CH 68
CH 69
US-33, W+48
US-34, W+49
US-35, W+50
US-36, W+51
US-37, W+52
US-38, W+53
US-39, W+54
US-40, W+55
US-41, W+56
US-42, W+57
US-43, W+58
US-44, W+59
US-45, W+60
US-46, W+61
US-47, W+62
US-48, W+63
US-49, W+64
US-50, W+65
US-51, W+66
US-52, W+67
US-53, W+68
US-54, W+69
US-55, W+70
US-56, W+71
US-57, W+72
US-58, W+73
US-59, W+74
US-60, W+75
US-61, W+76
US-62, W+77
US-63, W+78
US-64, W+79
US-65, W+80
US-66, W+81
US-67, W+82
US-68, W+83
US-69, W+84
CC 18
CC 19
CC 20
CC 21
CC 22
CC 23
CC 24
CC 25
CC 26
CC 27
CC 28
CC 29
CC 30
CC 31
CC 32
CC 33
CC 34
CC 35
CC 36
CC 37
CC 38
CC 39
CC 40
CC 41
CC 42
CC 43
CC 44
CC 45
CC 46
CC 47
CC 48
CC 49
CC 50
CC 51
CC 52
CC 53
CC 54
CC 55
CC 56
CC 57
CC 58
CC 59
CC 60
CC 61
CC 62
CC 63
CC 64
CC 75
CC 76
CC 77
CC 78
CC 79
CC 95
CC 96
CC 97
CC 98
CC 99
When you want to use the INSERT
function on page 20, find the CH/CC
number corresponding to the channel
number of the TV channel from this table.
Channel No. Country
US
CCIR
United States, Philippines, etc..
Middle East, Southeast Asia,
etc..
U
V
W
OIRT
Eastern Europe, Russia,
Vietnam, etc..
W+1
W+2
W+3
W+4
W+5
W+6
W+7
W+8
W+9
W+10
W+11
W+12
W+13
W+14
W+15
W+16
W+17
W+18
W+19
W+20
W+21
W+22
W+23
W+24
W+25
W+26
W+27
W+28
AUSTRALIA
Channel
Australia, etc..
CH
US
CCIR
E2
OIRT
R1
AUSTRALIA
AU-0
AU-1
AU-2
AU-6
AU-7
AU-8
AU-9
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
CH 12
CH 13
CH 14
CH 15
CH 16
CH 17
CH 18
CH 19
CH 20
CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CH 27
CH 28
CH 29
CH 30
CH 31
CH 32
US-2
US-3
US-4
US-5
US-6
US-7
US-8
US-9
US-10
E3
E4
E5
E6
E7
E8
E9
E10
E11
E12
R2
R6
R7
R8
R9
R10
R11
R12
AU-10
AU-11
US-11
US-12
US-13
US-14, W+29
US-15, W+30
US-16, W+31
US-17, W+32
US-18, W+33
US-19, W+34
US-20, W+35
US-21, W+36
US-22, W+37
US-23, W+38
US-24, W+39
US-25, W+40
US-26, W+41
US-27, W+42
US-28, W+43
US-29, W+44
US-30, W+45
US-31, W+46
US-32, W+47
CC
US
CCIR
S-1
S-2
S-3
S-4
S-5
S-6
S-7
S-8
OIRT
AUSTRALIA
AU-5
CC 01
CC 02
CC 03
CC 04
CC 05
CC 06
CC 07
CC 08
CC 09
CC 10
CC 11
CC 12
CC 13
CC 14
CC 15
CC 16
CC 17
E21
E22
E23
E24
E25
E26
E27
E28
E29
E30
E31
E32
AU-5A
X
Y
Z
Z+1
Z+2
S-9
R3
R4
R5
S-10
S-11
S-12
S-13
S-14
S-15
S-16
S-17
AU-3
AU-4
A-5
A-4
A-3
A-2
A-1
A
B
C
D
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional preparation
The illustrations shown in this section are for AV-2934WE and
AV-2134YE only, which are used for explanation purpose. Your
TV may not look exactly the same as illustrated.
Connecting to rear component/video input
terminal and output terminal
Rear of TV
AV-2934WE
Before connecting
VCR (for playing)
DVD player (composite signals)
COMPONENT
(VIDEO-2)
INPUT
•
Read the manuals provided with the devices for the proper
VIDEO-1
OUTPUT
INPUT
connection.
S
•
•
Turn off all the devices including the TV.
Note that connecting cables are not supplied.
VCR (for recording)
OVER
V
V
L
Y
/
V
L
L
CB
/
/
MONO
MONO
DVD player
(component video signals)
Connecting to front video input terminal
CR
R
R
R
AV-2934WE
Front of TV
Rear of TV
Camcorder or TV game
AV-2134YE
R
V
L/MONO
VIDEO-1
INPUT
MENU
OK
OUTPUT
IN (VIDEO-3)
VCR (for playing)
Headphones
AV-2134YE
V
L
V
L
MENU
OK
V
L
IN (VIDEO-2)
/
MONO
R
/
MONO
VCR (for recording)
R
R
When you use VIDEO-1 INPUT, you should choose to connect
S-VIDEO or video input. If S-VIDEO connector and video input
are connected at the same time, no picture display on the screen
and the message “PLEASE DISCONNECT VIDEO-1 CABLE!”
appears. In this case, you should disconnect either S-VIDEO or
video input.
When connecting to COMPONENT (VIDEO-2) input, depending
on the connection, choose the appropriate video input using the
menu (see page 18).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If a problem occurs when you are using the TV, check the below
troubleshooting guide before calling for repair.
• Cannot operate the
remote control
• The batteries may be exhausted. Replace with
new batteries (see page 7).
• Ensure that you are operating the remote less
than seven meters from the front of your TV.
• No picture,
no sound
• Deactivate the BLUE BACK function if it is turned
on.
• Choose the appropriate sound system. Refer to
“SOUND SYSTEM” on page 14.
• Cannot operate the
menus
• Press TV/VIDEO button to return to TV mode and
try operating the menus.
• Cannot operate the
front control buttons
• Deactivate the CHILD LOCK function if it is turned
on (see page 17).
• Snowy picture
• Check the aerial cable and its connection with the
TV.
• TV is turned off
suddenly
• This may due to the AUTO SHUT OFF function is
activated. Press the POWER button to turn on the
TV.
• Stripes appear on • Interference occurs caused by other devices such
the picture
as an amplifier, personal computer, or a hair drier.
Move such devices away from your TV.
• Colour patches
appear at the corner
of the screen
• This may due to the magnetized device such as a
speaker near to your TV. Keep the device apart
from your TV. Alternately, you can also use the
magnetic-shielded speaker.
• Double-pictures
(ghosting) occur
• Interference occurs caused by signal reflecting
from mountains or building. Try to adjust the
aerial’s direction or use a better directionality
antenna.
• Picture is tilted
• This may due to the earth magnetism. Refer to
“PICTURE TILT” on page 11 to correct the tilt.
• Poor picture
• Choose the appropriate colour system. Refer to
“COLOUR SYSTEM” on page 9.
• Adjust the COLOUR or BRIGHT setting. Refer to
“Adjusting the picture - USER” on page 10.
• Image takes a short
period to be
displayed
• Image required time to stabilize before display.
This is not a malfunction.
• White and bright still • Inevitable phenomenon due to the nature of the
image look as if it
were coloured
• TV may emitted
crackling sound
• This is due to a sudden change in temperature
and it is not a malfunction. If the crackling sound
is too frequent, request your service technician for
inspection.
picture tube. This is not a malfunction.
• Top of the image
from software
products or video
tape is distorted
• This is due to the condition of the video signal
whereby the image was not recorded properly.
This is not a malfunction.
• Feel a slight electric
shock when
touching the TV
screen
• This is due to the static electricity of the picture
tube and it will not harm the human body. This is
not a malfunction.
• Poor sound
• Adjust the sound frequency properly. Refer to
“EQUALIZER” on page 15.
• Stereo or bilingual • TV channel reception is poor. Change the stereo/
sound is unclear bilingual mode to mono sound (see page 15).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV RF systems
B, G, I, D, K, M
Colour systems
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz
Receiving channels
VHF low channel (VL), VHF high channel (VH), UHF channel (U)
Receives cable channels in mid band, super band and hyper band.
External input / output
VIDEO-1:
S-video input*, VIDEO input, AUDIO L/R input
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input (Except for AV-2134YE/
AV-2154CE.)
VIDEO-3:
OUTPUT:
VIDEO input, AUDIO L/R input (Except for AV-2134YE/AV-2154CE.)
VIDEO output, AUDIO L/R output
Headphone jack:
Stereo mini jack (3.5 mm diameter)
*Except for AV-2934LE/AV-29LS24/AV-2553LE/AV-2534LE/AV-2554LE/AV-25LS24/AV-2134YE/AV-2144LE/AV-2154CE/AV-2154LE.
** Sound-multiplex systems
A2 or NICAM (B/G, I, D/K)
Teletext system
FLOF (Fastext), WST (World Standard Text)
Language displayed by teletext
Please see the table in the description “TEXT LANGUAGE” on page 13.
I
**Depends on the models, STEREO/I II function for the Sound-multiplex systems may not be available. Please confirm with the chart
on page 3.
Design and specifications subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
0504-FLE-JMT
Download from Www.Somanuals.com. All Manuals Search And Download.
|