JVC CRT Television AV32L2EU AV28L2EU AV32X10EU AV28X10EU AV28WH5EU User Manual

ENGLISH

DEUTSCH

FRANÇAIS

NEDERLANDS

CASTELLANO

ITALIANO

PORTUGUÊS

AV32L2EU

AV28L2EU

AV32X10EU

AV28X10EU

AV28WH5EU

COLOUR TELEVISION

INSTRUCTIONS

FARBFERNSEHGERÄT

TELEVISEUR COULEUR

KLEURENTELEVISIE

TELEVISOR A COLOR

TELEVISORE A COLORI

TELEVISOR A CORES

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

GEBRUIKSAANWIJZING

MANUAL DE INSTRUCCIONES

ISTRUZIONI

VICTOR COMPANY OF JAPAN, LIMITED

INSTRUÇÕES

LCT0932-001A-U

0104-T-CR-JMUK

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly be-

fore you begin.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION:

TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE

USE OF THIS UNIT.

1. Operate only from the power source specified (AC 220 – 240 V, 50 Hz) on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid improper installation and never position the unit where good ventilation is unattainable.

When installing this television, distance recom-

mendations must be maintained between the

floor and wall, as well as installation in a tightly

15 cm

enclosed area or piece of furniture. Adhere to

the minimum distance guidelines shown for

10 cm

15 cm

safe operation.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it

yourself or remove the rear cover.

6. The surface of the TV screen is easily damaged. Be very careful with it when handling the TV.

Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never

use any cleaner or detergent on it.

7. The main power button on the TV does not fully isolate the TV from the AC supply. If you are

not going to use this TV for a long period of time, be sure to disconnect the AC plug from the

AC socket.

CONTENTS

PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

T-V LINK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

REMOTE CONTROL BUTTONS AND FUNCTIONS . . . . . . . . 9

MENU OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PICTURE SETTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

PICTURE FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SOUND SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ADDITIONAL MENU OPERATIONS . . . . . . . . . . . . . . . . . . . . 28

ADDITIONAL PREPARATION. . . . . . . . . . . . . . . . . . . . . . . . . 31

CH/CC NUMBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

TV BUTTONS AND PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . 34

TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Download from Www.Somanuals.com. All Manuals Search And Download.

35(3$5$7,21

■ &RQQHFWLQJ#WKH#$HULDO#DQG#9&5

→

If connecting a VCR, follow A

C .

Aerial

If not connecting a VCR, follow 1.

To operate T-V LINK functions, a T-V LINK compatible VCR

must be connected to the EXT-2 terminal on the TV. For de-

tails about T-V LINK functions, see “T-V LINK FUNCTIONS”

on page 5.

75-ohm

Coaxial

Cable

Back of the TV

Note:

• For further details, refer to the manuals provided with the

devices to be connected.

EXT-2

EXT-3

• The connecting cables are not provided.

• A video can be viewed from the VCR without performing

C. For details, refer to your VCR instruction manual.

EXT-1

AUDIO OUT

• To connect additional external devices, please see “AD-

DITIONAL PREPARATION” on page 31.

• To connect speakers and amplifier, please see “Con-

necting Speakers/Amplifier (Excluding AV28WH5EU)” on

page 32.

• When a decoder is connected to a T-V LINK compatible

VCR, set the DECODER (EXT-2) function to ON. For de-

tails, see “Using the DECODER (EXT-2) function” on

page 29. Otherwise, you will not be able to view scram-

bled channels.

75-ohm

Coaxial

Cable

21-pin SCART

Cable

To Aerial

Input

VCR

To Aerial

Output

AV IN/OUT

Terminal

■ &RQQHFWLQJ#WKH#SRZHU#FRUG#WR#WKH#$&#RXWOHW

Caution:

• Operate only from the power source specified

(AC 220 – 240 V, 50 Hz) on the unit.

■ 3XWWLQJ#%DWWHULHV#LQWR#WKH#5HPRWH#&RQWURO

Use two AAA/R03 dry cell batteries.

Insert the batteries from the ó end, making sure the ô and ó

polarities are correct.

To open the battery compartment, slide the door downwards and

lift off. Replace the door by sliding it upwards until it is secure.

Note:

• Follow the warnings printed on the batteries.

• Battery life is about six months to one year, depending on

your frequency of use.

• If the remote control does not work properly, replace the

batteries.

• The batteries we supply are only for setting up and test-

ing your TV, please replace them as soon as necessary.

• Always use good quality batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

■ ,QLWLDO#6HWWLQJV

When the TV is first turned on, it enters the initial setting

mode, and the JVC logo is displayed. Follow the instructions

on the on-screen display to make the initial settings.

< AV32L2EU/AV28L2EU >

Press the Main power button on the TV.

The Power lamp lights red (for power on), then green (for

TV on) and the JVC logo is displayed.

Main power

button

Power lamp

< AV32X10EU/AV28X10EU >

D0044-EN

Note:

• If the power lamp stays red and does not change to

Main power

button

Power lamp

green:

Your TV is in the standby mode. Press the

< AV28WH5EU >

(Standby) button on the remote control to turn your

TV on.

• The JVC logo does not appear when your TV has

been turned on once.

In this case, use the “LANGUAGE” and “AUTO PRO-

GRAM” functions to make the initial settings. For de-

tails, see “INSTALL” on page 23.

Main power

button

Power lamp

2 Press the

button.

The LANGUAGE menu appears.

LANGUAGE

BACK

Yellow button

Blue button

D0002(E)-EN

3 Press theì and ë buttons to

choose ENGLISH. Then press the

button.

English is set for the on-screen display description. The

COUNTRY menu appears as a sub-menu of the AUTO

PROGRAM function.

There are two COUNTRY menus. Pressing the yellow

button changes the COUNTRY menu as follows:

BACK

START

D0003-EN

4 Press the ì and ë buttons to

choose the country where you are

now located.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

5 Press the blue button to start the

9 Now, the initial settings are com-

AUTO PROGRAM function.

plete, and you can watch the TV.

The AUTO PROGRAM menu appears and received TV

channels are automatically registered in the Programme

numbers (PR).

Note:

• When your TV can detect the TV channel name from

the TV channel broadcast signal, it automatically

registers the TV channel name (ID) to the Pro-

gramme number (PR) in which the TV channel has

been registered.

• If a TV channel you want to view is not set to a Pro-

gramme number (PR), manually set it using the

MANUAL function. For details, see “EDIT/MANUAL”

on page 24.

AUTO PROGRAM

EDIT

CH / CC

CH 10

20%

BBC1

BACK

MOVE

INSERT

DELETE

MANUAL

D0004-EN

• The TV channel is not registered in Programme

number PR 0 (AV). When you want to register a TV

channel to PR 0 (AV), manually set it using the MAN-

UAL function. For details, see “EDIT/MANUAL” on

page 24.

If “ACI START/ACI SKIP” appears in the AUTO PRO-

GRAM menu:

You can use the ACI (Automatic Channel Installation)

function to decode the ACI data and complete the regis-

tration of all the TV channels in a short period of time.

For details of the ACI function and how to use it, refer to

“Using the ACI function” on page 28.

If you don’t want to use the ACI function, press the

button to choose ACI SKIP and then press

ýá

To cancel the AUTO PROGRAM function:

Press the button.

6 After the TV channels have been

registered in the Programme num-

bers (PR), the EDIT menu appears.

You can proceed to edit the Programme numbers (PR)

using the EDIT/MANUAL function. For details, see “ED-

IT/MANUAL” on page 24.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUAL function, go

to the next step.

7 Press the

button to display the

T-V LINK menu.

T-V LINK

DOWNLOAD TV

VCR

BACK

EXIT

D0005-EN

8 Operate the T-V LINK menu accord-

ing to the type of a VCR connected

to the EXT-2 terminal.

When a T-V LINK compatible VCR is not con-

nected:

Press the

The T-V LINK menu disappears.

button to exit the T-V LINK menu.

When a T-V LINK compatible VCR is connected:

Follow the operating procedure “Downloading the data

to VCR” on page 28 to transmit the Programme number

(PR) data.

Download from Www.Somanuals.com. All Manuals Search And Download.

709#/,1.#)81&7,216

When a T-V LINK compatible VCR is connected to the

EXT-2 Terminal on the TV, it is easier to set up the VCR and

Note:

to view videos. T-V LINK uses the following features:

• Operation via the TV is not possible.

• Generally, the VCR cannot record a TV channel that can-

not be received properly by the VCR’s tuner, even though

you can view that TV channel on the TV. However, some

VCRs can record a TV channel by using the TV’s output

if that channel can be viewed on the TV, even though the

TV channel cannot be received properly by the VCR’s

tuner. For details, refer to your VCR instruction manual.

To use T-V LINK functions:

A T-V LINK compatible VCR is necessary.

The VCR must be connected to the EXT-2 terminal on the TV

by a fully wired SCART cable.

Note:

• A “T-V LINK compatible VCR” means a JVC VCR with the

T-V LINK logo or a VCR with one of the following logos.

However, these VCRs may support some or all of the fea-

tures described below. For details, refer to your VCR in-

struction manual.

■ 79#$XWR#3RZHU#2Q29&5#

,PDJH#9LHZ

When the VCR starts playing, the TV automatically turns on

and the images from EXT-2 terminal are displayed on the

screen.

When the VCR menu is operated, the TV automatically turns

on and the images from EXT-2 terminal are displayed on the

screen.

“Q-LINK” (a trademark of Panasonic Corporation)

“Data Logic” (a trademark of Metz Corporation)

“Easy Link” (a trademark of Phillips Corporation)

“Megalogic” (a trademark of Grundig Corporation)

“SMARTLINK” (a trademark of Sony Corporation)

■ 3UH0VHW#'RZQORDG

Note:

• This function does not operate if your TV’s main power is

turned off. Set your TV’s main power to on (standby

mode).

Download the registered data on the TV channels from the TV

to the VCR.

The Preset Download function automatically begins when the

initial setting is complete or whenever the AUTO PROGRAM

or EDIT/MANUAL operations are performed.

Note:

• This function can be operated via VCR operation.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download

was not performed correctly. Before trying to download again,

ensure the following:

• The VCR power is turned on.

• The VCR is T-V LINK compatible.

• The VCR is connected to the EXT-2 terminal.

• The SCART cable is fully wired.

■ 'LUHFW#5HF

“What You See Is What You Record”

You can record to VCR the images that you are currently

viewing on TV by a simple operation.

For details, read the manual for your VCR.

Operate via the VCR. “VCR IS RECORDING” is displayed.

In the following conditions, the VCR will stop recording if

the TV is turned off, if the TV channel or input is switched,

or if the menu is displayed on the TV:

• When recording images from an external device connected

to the TV.

• When recording a TV channel after it has been unscrambled

on a decoder.

• When recording a TV channel by using the TV’s output be-

cause that TV channel cannot be properly received on the

VCR’s tuner.

Download from Www.Somanuals.com. All Manuals Search And Download.

%$6,&#23(5$7,21

< AV32L2EU/AV28L2EU >

■ 7XUQ#WKH#0DLQ#SRZHU#RQ

Press the Main power button on the TV.

The Power lamp lights red and your TV is in the standby mode.

Note:

Power lamp

Main power button

• If the Power lamp lights green, the TV is already on.

< AV32X10EU/AV28X10EU >

To turn the Main power off:

Press the Main power button again.

The Power lamp goes off.

Caution:

Power lamp

Main power

button

• The main power button on the TV does not fully isolate the

TV from the AC supply. If you are not going to use this TV

for a long period of time, be sure to disconnect the AC plug

from the AC socket.

< AV28WH5EU >

Power lamp

Main power button

■ 7XUQ#WKH#79#RQ#IURP#VWDQGE\#PRGH

Press the

button, the

buttons.

(Standby) button, the

buttons or the Number

The Power lamp lights red to green and your TV will be turned on.

To turn the TV off:

Press the

(standby) button again.

Number

buttons

The Power lamp changes from green to red and the TV enters

standby mode.

■ &KRRVH#D#79#FKDQQHO

Choose a Programme number (PR) in which the desired Pro-

gramme TV channel has been set.

Use the ë buttons:

Press the ë buttons to choose the desired Pro-

gramme number (PR).

Use the Number buttons:

Enter the desired Programme number (PR) with the

Number buttons.

Example

• PR 12 → press ú and ù.

• PR 6 → press õ.

Use the PR LIST:

1 Press the # (Information) button to dis-

play the PR LIST.

PR LIST

BBC1

-10

+10

D0006-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATION

Use the ë buttons:

Press the ë buttons to choose an EXT terminal.

2 Press the ì and ë buttons to choose a

Programme number (PR). Then press the

button.

Use the PR LIST:

1 Press the

(Information) button to dis-

Note:

play the PR LIST.

• For Programme numbers (PR) with the CHILD

LOCK function set, the (CHILD LOCK) mark is

displayed next to the Programme number (PR) in

the PR LIST.

2 Press the ì and ë buttons to choose

an EXT terminal. Then press the

button

• You cannot use the ë buttons to choose a Pro-

gramme number (PR) with the CHILD LOCK fun-

tion set.

Note:

• The EXT terminals are registered after the Pro-

gramme number PR 99.

• Even if you try to choose a Programme number

• You can choose a video input signal from the S-VID-

EO signal (Y/C signal) and regular video signal

(composite signal). For details, see “S-IN (S-VIDEO

input)” on page 19.

• If you do not have a clear picture or no colour ap-

pears, change the colour system manually. See

“COLOUR SYSTEM” on page 17.

(PR) with the CHILD LOCK function set, the

(CHILD LOCK) mark will appear, and you cannot

watch the TV channel. To watch the TV channel,

see “CHILD LOCK” on page 21.

• If you do not have a clear picture or no colour ap-

pears, change the colour system manually. See

“COLOUR SYSTEM” on page 17.

• If the picture is tilted, correct it. See “PICTURE

TILT (Excluding AV28WH5EU)” on page 17.

•

When choosing an EXT terminal with no input signal,

the EXT terminal number becomes fixed on the screen.

• This TV set has a function which can automatically

change over the input according to a special signal

output from an external device. (The EXT-4 terminal

does not support it.)

■ $GMXVW#WKH#YROXPH

To return to a TV channel:

Press the ì buttons to adjust the vol-

ume.

Press the

buttons.

button, the ë buttons or the Number

The Volume indicator appears and the volume changes as

you press the –/+ buttons.

To use the Programme number PR 0 (AV):

When the TV and VCR are connected only by the Aerial

cable, choosing the Programme number PR 0 (AV) al-

lows you to view images from the VCR. Set the VCR RF

channel to the Programme number PR 0 (AV) manually.

For details, see “EDIT/MANUAL” on page 24.

■ :DWFK#LPDJHV#IURP#H[WHUQDO#

GHYLFHV

Choose an EXT terminal to which the desired external device

has been connected.

Pressing the

lows:

button changes the choice as fol-

Use the

button:

TV mode

EXT modes

Press the

button to choose an EXT terminal.

Pressing the

button changes the choice as follows:

Programme

numbers

PR 1 – PR 99

PR 0

EXT-1

EXT-4

EXT-2

EXT-3

TV mode

EXT modes

Programme

numbers

PR 1 – PR 99

EXT-1

EXT-4

EXT-2

EXT-3

Note:

• The VCR RF channel is sent as the RF signal from

the VCR.

• Also refer to your VCR instruction manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

BASIC OPERATION

■ 2SHUDWLQJ#ZLWK#WKH#EXWWRQV#RQ#WKH#79

1 ^{Press the P B buttons to turn the}

< AV32L2EU/AV28L2EU >

Side of the TV

TV on from standby mode.

Press the P

Programme number (PR) or an EXT

terminal.

buttons to choose a

EXT-2

EXT-3

EXT-1

3 Press the D (Volume) button and

the ^Cbuttons to adjust the vol-

ume.

1 Press the D (Volume) button.

The volume level indicator appears.

2 Press the C buttons while the volume lev-

el indicator is displayed.

< AV32X10EU/AV28X10EU >

Behind the Cover

< AV28WH5EU >

Behind the Cover

;

Download from Www.Somanuals.com. All Manuals Search And Download.

5(027(#&21752/#%877216#$1'#)81&7,216

1 0XWLQJ#%XWWRQ

You can turn the volume off instantly.

Press the (Muting) button to turn off the Vol-

ume. Pressing the

(Muting) button again

resumes the previous Volume level.

2 1XPEHU#%XWWRQV

You can choose a Programme number (PR) by

entering the Programme number.

Example:

→

• PR 12 press ú and ù.

→

• PR 6

press õ.

You can also press the

an EXT terminal.

button repeatedly to choose

3 =220#%XWWRQ

You can change the screen size according to the picture as-

pect ratio. Choose the optimum one from the following ZOOM

modes.

AUTO:

For any picture format except Normal Picture (4:3 Aspect Ra-

tio), the picture will be automatically displayed in the optimum

screen size.

For Normal Picture (4:3 Aspect Ratio), the picture displayed

in accordance with the ZOOM mode set on the 4:3 AUTO AS-

PECT menu. For details, see “4:3 AUTO ASPECT” on

page 17.

Note:

• AUTO may not function properly with poor signal quality.

In this case, choose an optimum ZOOM mode manually.

• This TV supports WSS (wide-screen signals). When

broadcasts with WSS are received with the ZOOM mode

set at AUTO, the most suitable ZOOM mode is automati-

cally chosen according to the WSS received.

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as its original

size is.

PANORAMIC:

This mode stretches the left and right sides of a normal pic-

ture (4:3 Aspect Ratio) to fill the screen, without making the

picture appear unnatural.

Note:

• The top and bottom of the picture are slightly cut off.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL BUTTONS AND FUNCTIONS

14:9 ZOOM:

This mode zooms up the Wide Picture (14:9 Aspect Ratio) to

the upper and lower limits of the screen.

$GMXVWLQJ#WKH#YLVLEOH#DUHD#RI#WKH#SLF0

WXUH

If subtitles or the top (or bottom) of the picture are cut off, ad-

just the visible area of the picture manually.

1 Press the ! button.

The ZOOM menu appears.

16:9 ZOOM:

This mode zooms up the Wide Picture (16:9 Aspect Ratio) to

the full screen.

2 Press the

button to display the ZOOM

mode indication.

Indicator is displayed.

16 : 9 ZOOM

D0010-EN

16:9 ZOOM SUBTITLE:

This mode zooms up the Wide Picture (16:9 Aspect Ratio)

with subtitles to the full screen.

3 While it is displayed, press the

but-

tons to adjust the visible area vertically.

Note:

• You cannot adjust the visible area in REGULAR or

FULL mode.

FULL:

This mode uniformly stretches the left and right sides of a nor-

mal picture (4:3 aspect ratio) to fill the wide TV screen.

4 +<3(5#6281'#%XWWRQ

You can enjoy sounds with a wider ambience.

Press the

(HYPER SOUND) button to turn

the HYPER SOUND function on or off.

Note:

• Use for pictures with a 16:9 aspect ratio that have been

squeezed into a normal picture (4:3 aspect ratio), you

can restore their original dimensions.

• The HYPER SOUND function does not work properly with

mono sound.

• The HYPER SOUND function can be also turned on or off

by using the SOUND SETTING menu. For details, see

“HYPER SOUND” on page 18.

&KRRVH#WKH#=220#PRGH

1 Press the

button to display the

ZOOM menu.

ZOOM

AUTO

REGULAR

PANORAMIC

14:9 ZOOM

16:9 ZOOM

16:9 ZOOM SUBTITLE

FULL

BACK

D0009-EN

2 Press the ë buttons to choose a ZOOM

mode. Then press the button.

The picture expands and the chosen ZOOM mode is dis-

played in about 5 seconds.

Note:

• The ZOOM mode may be automatically changed

due to the control signal from an external device.

When you want to return to the previous ZOOM

mode, choose the ZOOM mode again.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL BUTTONS AND FUNCTIONS

5#,QIRUPDWLRQ#%XWWRQ

You can display the PR LIST or the Current Time on the

screen.

8 6WDQGE\#%XWWRQ

Press the

on or off.

(Standby) button to turn the TV

Press the

Pressing the

follows:

(Information) button.

(Information) button changes the display as

When the TV is turned on, the power lamp changes from red

to green.

9 &RORXU#%XWWRQV

PR LIST

The colour buttons are used for the teletext operations or the

menu operations. For details, see “~ Teletext Control But-

tons and VCR ( DVD Switch” on page 12 or “MENU OPER-

ATION” on page 14.

12 : 00

BBC1

0 2.#%XWWRQ

The

button is used to operate menus. For details, see

“MENU OPERATION” on page 14.

No indication

#%XWWRQV

You can choose a Programme number (PR) or an EXT termi-

-10

+10

D0011-EN

nal.

Note:

Press the

buttons to choose an Pro-

• You can choose Programme numbers (PR) or EXT termi-

nals with the PR LIST. For details, see “Use the PR LIST:”

on page 6.

gramme number (PR) or an EXT terminal.

The

buttons are also used to operate menus.

For details, see “MENU OPERATION” on page 14.

• This TV uses teletext data to set the current time. If the TV

has not received a TV channel that has teletext pro-

grammes since it was turned on, the time display is blank.

To view the current time, choose a TV channel that has

teletext programmes. The time will still be displayed as

long as you do not turn off the TV, even if you choose oth-

er TV channels.

= 9&52'9'# &RQWURO# %XWWRQV# DQG

9&5#(#'9'#6ZLWFK

These buttons can be used to operate a JVC brand VCR or

DVD player. Pressing the button having the same appear-

ance as the original remote control button of a device makes

the function work in the same way as the original remote con-

trol.

• When watching videos, an incorrect current time is some-

times displayed.

• The

(Information) button is also used to operate men-

us. For details, see “MENU OPERATION” on page 14.

1 Set the VCR ( DVD Switch to the VCR or

DVD position.

VCR:

When you are operating the VCR, set the switch to the

VCR position.

6 79#%XWWRQ

You can return to a TV channel instantly.

Press the

button.

DVD:

The TV returns to the TV mode and a TV channel appears.

When you are operating the DVD player, set the switch

to the DVD position.

Note:

• The

button is also used to operate menus. For de-

2 Press the VCR/DVD Control Button to con-

trol your VCR or DVD player.

tails, see “MENU OPERATION” on page 14.

7 ì#%XWWRQV

Note:

You can adjust the volume.

• If your device is not made by JVC, these buttons

cannot be used.

• Even if your device is made by JVC, some of these

buttons or any one of the buttons may not work, de-

pending on the device.

Press the ì buttons to adjust the sound.

Note:

• The ì buttons are also used to operate menus. For de-

tails, see “MENU OPERATION” on page 14.

• You can use the

buttons to choose a TV chan-

nel. The VCR will receive or choose the chapter the

DVD player plays back.

• Some DVD player models use the

buttons for

both operating of Fast forward/backward functions

and choosing the chapter. In this case, the 1/¡

the buttons do not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL BUTTONS AND FUNCTIONS

■ ~#7HOHWH[W#&RQWURO#%XWWRQV#DQG#9&5#(#'9'#6ZLWFK

4 Choose a teletext page by pressing the

buttons, Number buttons or Colour

buttons.

To return to the TV mode:

Press the

button or

(Text) button.

Note:

• If you have trouble receiving teletext broadcasts,

consult your local dealer or the teletext station.

• The ZOOM function will not operate in the TV and

text mode or Text mode.

• No menu operations are possible when viewing a

teletext programme.

• Language display depends on the country which

was set on the COUNTRY menu. If characters on a

Teletext programme do not appear properly,

change the COUNTRY Setting to other country’s. For

detail, “Changing the COUNTRY setting” on

page 28.

%DVLF#RSHUDWLRQ

You can view three types of teletext broadcasts on the TV:

FLOF (Fastext), TOP and WST.

8VLQJ#WKH#/LVW#0RGH

You can store the numbers of your favourite teletext pages in

memory and call them up quickly using the colour buttons.

1 Choose a TV channel with a teletext broad-

cast.

To store the page numbers:

2 Set the VCR ( DVD switch to the

(Text)

(

position.

1 Press ð button to engage the List

mode.

The stored page numbers are displayed at the bottom of

the screen.

3 Press " (Text) button to display the tele-

2 Press a Colour button to choose a posi-

tion. Then press the Number buttons to en-

ter the page number.

text.

Pressing " (Text) button changes the mode as follows:

TEXT

---

TV mode

TV and Text mode

3 Press and hold down (Store) button.

TEXT

---

The four page numbers blink white to indicate that they

are stored in memory.

To call up a stored page:

D0012-EN

Text mode

1 Press the ð button to engage the List

mode.

2 Press a colour button to which a page has

been assigned.

TEXT

---

D0043-EN

TV mode

Text mode

To exit the List mode:

Press the

button again.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL BUTTONS AND FUNCTIONS

+ROG

6L]H

You can hold a teletext page on the screen for as long as you

want, even while several other teletext pages are being re-

ceived.

You can double the height of the teletext display.

Press the

(size) button.

Press the

(Hold) button.

Hold indication

To cancel the Hold function:

Press

(Hold) button again.

6XE0SDJH

Some teletext pages include sub-pages that are automatically

displayed.

,QGH[

You can return to the index page instantly.

You can hold any sub-page, or view it at any time.

Press

(Index) button.

1 Press the

(Sub-page) button to operate

the Sub-page function.

Sub-page numbers are displayed at the left of the

screen.

FLOF (Fastext)/TOP/WST:

Returns to page 100 or a previously specified page.

List mode:

Returns to the page number displayed in the lower left area of

the screen.

Colour*

Yellow

Meaning of sub-page number

Currently being displayed.

Can be displayed.

&DQFHO

White

You can search for a teletext page while watching TV.

Blue or Red

Cannot be displayed and it is not sent.

1 Press the Number button to enter a page

number, or press a Colour button.

The TV searches for a teletext page.

*: Background color of the sub-page number.

Press the

buttons to choose a sub-

page number.

2 Press

(Cancel) button.

To cancel the Sub-page function:

Press the (Sub-page) button again.

The TV programme appears. When the TV finds the

teletext page, its page number appears in the upper left

of the screen.

5HYHDO

Some teletext pages include hidden text (such as answers to

3 Press

(Cancel) button to return to a tele-

text page when the page number is on the

screen.

a quiz).

You can display the hidden text.

Each time you press the

text is hidden or revealed.

(Reveal) button,

Note:

• The TV mode cannot be resumed even by pressing

the

(Cancel) button. A TV programme is tempo-

rarily displayed instead of the teletext programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

0(18#23(5$7,21

This TV has a number of functions you can operate using

menus. To fully utilize all your TV’s functions, you need to un-

derstand the basic menu operating techniques fully.

4 Press

button to complete the

setting.

The menu disappears.

1 Press the

button to display the

MENU (main menu).

To return to the previous menu:

Press

(information) button.

The MENU (main menu) appears. In it, the titles of the

menus are displayed.

To exit a menu instantly:

Press the

button.

PICTURE SETTING

PICTURE FEATURES

SOUND SETTING

EXT SETTING

FEATURES

INSTALL

DEMO

Note:

• When watching the television with the NTSC system,

the menus are displayed at about half of their normal

vertical size.

• When a menu is displayed on the screen, the ZOOM

mode may be automatically changed to the FULL

mode. This is not a malfunction. When the menu dis-

appears, the ZOOM mode will return to the previous-

ly set ZOOM mode.

BACK

D0013-EN

2 Press the

buttons to choose a

menu title, and press the

button.

The menu appears.

PICTURE SETTING

TINT

NORMAL

CONTRAST

BRIGHT

SHARP

COLOUR

HUE

ECO MODE

OFF

BACK

RESET

D0014-EN

3 Operate the menus according to the

operation description of each func-

tion.

Note:

• For details, refer to the operation descriptions of

each function described for each menu which fol-

lows this “MENU OPERATION”.

• The display appearing at the bottom of a menu indi-

cates a button on the remote controller you can use

when you operate a chosen function.

Download from Www.Somanuals.com. All Manuals Search And Download.

3,&785(#6(77,1*

PICTURE SETTING

Note:

• You can change the HUE setting (picture hue) only

TINT

NORMAL

when the colour system is NTSC 3.58 or NTSC 4.43.

CONTRAST

BRIGHT

SHARP

COLOUR

HUE

ECO MODE

To return to the default settings in each TINT

mode:

OFF

BACK

RESET

Press the blue button.

Returns the picture settings in the currently chosen TINT

mode to the default settings, and stores them in the TINT

mode again.

D0014-EN

To display the PICTURE SETTING menu:

3 Press the

tings.

button to complete the set-

1 Press the

button to display MENU

(main menu).

2 Press the ë button to choose PICTURE

SETTING, and press the button.

The menu disappears.

■ (&2#02'(

When you set the ECO MODE function to ON, the screen

contrast is automatically adjusted to a setting suitable for the

brightness of your room. This reduces eye strain for you and

the power consumption of the TV.

■ 7,17

You can select one of three TINT modes (three kinds of pic-

ture settings) to adjust the picture settings automatically.

1 Press the ë buttons to choose TINT.

1 Press ë buttons to choose ECO MODE.

2 Press ì buttons to choose ON.

2 Press ì buttons to choose a mode.

COOL:

To cancel the ECO MODE function:

Press ì buttons to choose OFF.

A cool white colour base with a boost in the colour and

contrast levels that creates a more vivid picture.

WARM:

3 Press the

ting.

button to complete the set-

A warm orange/red colour base that creates the appro-

priate colour and contrast levels for watching films.

The menu disappears.

NORMAL:

A normal white colour base with normal colour and con-

trast levels.

3 Press the

ting.

button to complete the set-

The menu disappears.

■ 3LFWXUH#$GMXVWPHQW

You can change the picture settings of each TINT mode as

you like.

The picture settings changed are stored in the TINT mode.

1 Press the ë buttons to choose an item.

2 Press the ì buttons to change the set-

ting.

Item

Lower

Higher

CONTRAST

(picture contrast)

Darker

Softer

Brighter

Sharper

Deeper

BRIGHT

(picture brightness)

SHARP

(picture sharpness)

Lighter

Reddish

COLOUR

(picture colour)

Greenish

HUE

(picture hue)

Download from Www.Somanuals.com. All Manuals Search And Download.

3,&785(#)($785(6

■ 'LJL3XUH#3UR#

PICTURE FEATURES

+([FOXGLQJ#$95;:+8(8,

DIGITAL VNR

DigiPure Pro

AUTO

COLOUR SYSTEM

4:3 AUTO ASPECT

PICTIRE TILT

The DigiPure Pro function uses the latest in digital technology

to give you a natural looking picture. The DigiPure Pro func-

tion includes the following two functions.

BACK

DigiPure function:

This function helps to create a natural looking picture by elim-

inating unnecessary edges from high-contrast and crisp im-

ages. Conversely, for images with low-contrast, edges are

added to produce a sharper, more detailed picture.

You can choose from the three DigiPure function settings of

AUTO, MIN and MAX.

D0015-EN

To display the PICTURE FEATURES menu:

1 Press the

button to display MENU

(main menu).

2 Press the ë button to choose PICTURE

FEATURES, and press the button.

Note:

• If you set the DigiPure effect too high on a low-quality pic-

ture that contains a lot of noise, this may actually make

the noise worse. It is recommended to use the AUTO set-

ting if you can.

■ ',*,7$/#915

The DIGITAL VNR function cuts down the amount of noise in

the original picture.

You can choose from the three DIGITAL VNR function set-

tings of AUTO, MIN and MAX.

Picture motion compensation function:

This function displays fast-moving pictures (for example, the

players or ball in a football game) more smoothly and natural-

ly on the screen.

Note:

• If you set the DIGITAL VNR effect too high it can make the

picture less sharp. It is recommended to use the AUTO

setting if you can.

Note:

• The effect level of the picture motion compensation func-

tion cannot be changed. The effect level is the same no

matter which of the AUTO, MIN or MAX settings is used.

1 Press the ë buttons to choose DIGITAL

VNR.

Press the

buttons to choose DigiPure Pro.

2 Press the ì buttons to choose a setting.

AUTO:

The TV will automatically adjust the level of the DIGITAL

VNR effect to match the amount of noise in the picture,

giving you the best possible picture.

The TV will automatically adjust the level of the DigiPure

effect to match the amount of noise in the picture, giving

the best possible picture.

MIN:

The level of the DIGITAL VNR effect is set to the mini-

mum. If you set the DIGITAL VNR function to AUTO but

feel that the sharpness of the original picture has not

been reproduced fully, change the setting from AUTO to

MIN.

• The MIN setting is not suitable for low-quality pictures

which contain a lot of noise.

The level of DigiPure effect is set to the minimum. When

you set the DigiPure Pro function to AUTO and notice

some noise, change the setting from AUTO to MIN.

• The MIN setting is not suitable for high-quality pictures

which contain very little noise.

MAX:

The level of DigiPure effect is set to the maximum. If you

set the DigiPure Pro function to AUTO but feel that the

original picture quality has not been reproduced fully,

change the setting from AUTO to MAX.

• The MAX setting is not suitable for low-quality pictures

which contain a lot of noise.

The level of the DIGITAL VNR effect is set to the maxi-

mum. If you set the DIGITAL VNR function to AUTO but

still notice some noise, change the setting from AUTO to

MAX.

• The MAX setting is not suitable for high-quality pictures

which contain very little noise.

OFF:

The DigiPure Pro function is turned off.

3 Press the

ting.

button to complete the set-

3 Press the

ting.

ýbutton to complete the set-

The menu disappears.

The menu disappers.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE FEATURES

■ &2/285#6<67(0

The colour system is chosen automatically. However, if the

picture is not clear or no colour appears, choose the colour

system manually.

■ 7=6#$872#$63(&7

You can choose one of three ZOOM modes, REGULAR,

PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the nor-

mal picture (4:3 aspect ratio).

1 Press the

buttons to choose COLOUR

button.

1 Press the

buttons to choose 4:3 AUTO

button.

SYSTEM. Then press the

The Sub-menu of the COLOUR SYSTEM function ap-

pears.

ASPECT. Then press the

The Sub-menu of the 4:3 AUTO ASPECT function ap-

pears.

COLOUR SYSTEM

4:3 AUTO ASPECT

PANORAMIC

REGULAR

14:9 ZOOM

PAL

BACK

D0017-EN

D0016-EN

2 Press the

mode.

buttons to choose a ZOOM

button to complete the set-

2 Press the ì buttons to choose the ap-

propriate colour system.

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

3 Press the

tings.

The menu disappears.

■ 3,&785(#7,/7#

NTSC 3.58 MHz system

NTSC 4.43:

NTSC 4.43 MHz system

AUTO:

This function detects a colour system from the input sig-

nal. Only when you are viewing a picture from Pro-

gramme number PR 0 (AV), or EXT terminal, you can

choose using the AUTO function.

+([FOXGLQJ#$95;:+8(8,

There are cases where the Earth’s magnetic force may make

the picture tilt. If this happens, you can correct the picture tilt.

1 Press the

buttons to choose PICTURE

button.

TILT. Then press the

The Sub-menu of the PICTURE TILT function appears.

3 Press the

ting.

button to complete the set-

PICTURE TILT

The menu disappears.

Note:

• The AUTO function may not function properly if you

have poor signal quality. If the picture is abnormal in

the AUTO function, choose another colour system

manually.

BACK

D0018-EN

• When in the Programme numbers PR 0 (AV) to PR

99, you cannot choose NTSC 3.58 or NTSC 4.43.

2 Press the

comes level.

buttons until the picture be-

button to complete the set-

3 Press the

ting.

The menu disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

6281'#6(77,1*

■ 63($.(5#

SOUND SETTING

+([FOXGLQJ#$95;:+8(8,

STEREO/

BASS

TREBLE

BALANCE

You can turn off the sound from the TV speakers; but you

should only do this if an audio system is connected to the TV

as a substitute for the TV speakers. When you are using this

function, see “Setting the SPEAKER function (Excluding

AV28WH5EU)” on page 30.

BBE

HYPER SOUND

SPEAKER

OFF

BACK

When a sound is not issued from the TV speaker:

If the SPEAKER function is set to OFF, the TV speaker does

not issue sound. Press the ë buttons to choose the

SPEAKER. Then press the ì buttons to choose ON.

D0019-EN

To display the SOUND SETTING menu:

1 Press the

button to display MENU

(main menu).

■ %%(#

2 Press the

button to choose SOUND

+([FOXGLQJ#$95;:+8(8,

SETTING. Then press the

button.

You can use the BBE function to enjoy easy-to-listen sound

that is faithful to the original sound recorded.

■ 67(5(2#2#,‡,,

When you are viewing a bilingual broadcast programme, you

can choose the sound from Bilingual I (Sub I) or Bilingual II

(Sub II). When the stereo broadcasting is received poorly, you

can change from stereo to mono sound so that you can hear

the broadcast more clearly and easily.

1 Press the ë buttons to choose BBE.

2 Press the ì buttons to choose ON.

To cancel the BBE function:

Press the ì buttons to choose OFF.

1 Press the

I • II.

buttons to choose STEREO /

buttons to choose a sound

3 Press the

ting.

button to complete the set-

2 Press the

mode.

The menu disappears.

• Licensed by BBE Sound, Inc. BBE is a registered trade-

mark of BBE Sound, Inc.

E : Stereo sound

H : mono sound

Fý : Bilingual I (sub I)

■ +<3(5#6281'

ýG : Bilingual II (sub II)

You can enjoy sounds with a wider ambience.

3 Press the

ting.

button to complete the set-

1 Press the ë buttons to choose HYPER

SOUND.

The menu disappears.

2 Press the ì buttons to choose ON.

Note:

• The sound mode you can choose differs depending

on the TV programme.

• This function does not work in the EXT modes. And

this function does not appear in the SOUND SET-

TING menu.

To cancel the HYPER SOUND function:

Press the ì buttons to choose OFF.

3 Press the

ting.

button to complete the set-

The menu disappears.

■ 6RXQG#$GMXVWPHQW

You can adjust the sound to your liking.

Note:

• The HYPER SOUND function does not work properly

with mono sound.

1 Press the ë buttons to choose an item.

2 Press the ì buttons to adjust it.

• You can turn on or off the HYPER SOUND function

with a single press. For details, see “4 HYPER

SOUND Button” on page 10.

Item

BASS

Weaker

Left

Stronger

Right

TREBLE

BALANCE

3 Press the

ting.

button to complete the set-

The menu disappears.

Download from Www.Somanuals.com. All Manuals Search And Download.

(;7#6(77,1*

EXT SETTING

Note:

• The EXT-1 terminal does not support S-VIDEO signal

(Y/C signal) and you cannot set S-IN (S-VIDEO in-

put) in the EXT-1 terminal.

• Setting S-IN (S-VIDEO input) changes the head

character from “E” to “S”. For example, “E2” is

changed to “S2”.

EXT-1

DUBBING

EXT-2

EXT-3

EXT-4

•

Even an device which enables the S-VIDEO signal (Y/

C signal) to be output may output a regular video sig-

nal (composite signal) depending on the device set-

ting. If a picture cannot appear because S-IN (S-

VIDEO input) setting has been made, read the device

Instruction Manual carefully again to check for the de-

vice settings.

BACK

ID LIST

S-IN

D0020-EN

To display EXT SETTING menu:

1 Press the

button to display MENU

(main menu).

2 Press the ë button to choose EXT SET-

TING. Then press the button.

■ ,'#/,67

You can have a name corresponding to the devices connect-

ed for each EXT terminal. Giving a name to an EXT terminal

makes the EXT terminal number appear on the screen, to-

gether with the name.

■ 60,1#+609,'(2#LQSXW,

When connecting a device (such as S-VHS VCR) which ena-

bles an S-VIDEO signal (Y/C signal) to be output, you can en-

joy high-quality picture of the S-VIDEO signal (Y/C signal).

1 Press the ë buttons or ì buttons to

choose an EXT terminal.

Preparation:

• At first, read the Device Instruction Manual and “ADDITION-

AL PREPARATION” on page 31 to connect the device to the

TV properly. Second, follow the Device Instruction Manual

to set the device so that a S-VIDEO signal (Y/C signal) can

be output to the TV.

2 Press the blue button to display the name

list (ID LIST).

EXT SETTING

ID LIST

VHS

EXT-1

EXT-3

EXT-4

• Do not set S-IN (S-VIDEO input) to the EXT terminal con-

nected to a device which cannot output a S-VIDEO (Y/C sig-

nal). If it is set wrongly, a picture cannot appear.

DUBBING

EXT-2

S-VHS

DVC

SAT

STB

GAME

DVD

8mm

Hi-8

1 Press the

buttons or

buttons to

choose an EXT terminal.

BACK

2 Press the yellow button and set the S-IN (S-

VIDEO input).

D0021-EN

A K (S-VIDEO input) mark is displayed. You can view

an S-VIDEO signal (Y/C signal) instead of the regular

video signal (composite signal).

3 Press the ë buttons to choose a name.

Then press the button.

To cancel the S-IN (S-VIDEO input) setting:

The ID LIST disappears and the name is assigned to the

EXT terminal.

Press the yellow button and turn off K (S-VIDEO in-

put) mark. The regular video signal (composite signal)

pictures are resumed.

To erase a name assigned to the EXT terminal:

Choose a blank space.

3 Press the

ting.

button to complete the set-

4 Press the

ting.

button to complete the set-

The menu disappears.

Note:

• You cannot assign an EXT terminal name not found

in the name list (ID LIST).

Download from Www.Somanuals.com. All Manuals Search And Download.

EXT SETTING

■ '8%%,1*

You can choose a signal source to be output from an EXT-2

terminal.

You can choose any one of the output signal of the device

connected to the EXT terminal and the picture and sound

from a TV channel you are currently viewing to output it to the

EXT-2 terminal.

1 Press the ì buttons to choose the arrow

from the menu.

EXT SETTING

EXT-1

DUBBING

EXT-2

EXT-3

EXT-4

BACK

D0022-EN

2 Press the ë buttons to choose an EXT

terminal or TV.

The arrow in the menu represents a signal flow. The left

side of the arrow denotes a signal source output from the

EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT ter-

minal passes through the TV and is output from the EXT-

2 terminal.

TV:

The picture and sound of the TV channel you are cur-

rently viewing are output from the EXT-2 terminal.

3 Press the

ting.

button to complete the set-

The menu disappears.

Note:

• During dubbing, you cannot turn off the TV. Turning

off the TV also turns off the output from the EXT-2 ter-

minal.

• When you choose an EXT terminal as an output, you

can view a TV programme or a picture from the other

EXT terminal while dubbing the picture from a de-

vice connected to the EXT terminal onto a VCR con-

nected to the EXT-2 terminal.

• The RGB signals from the TV games cannot be out-

put.Teletext programmes cannot be output.

Download from Www.Somanuals.com. All Manuals Search And Download.

)($785(6

■ %/8(#%$&.

FEATURES

You can set the TV to automatically change to a blue screen

and mute the sound if the signal is weak or absent, or when

there is no input from an external device.

SLEEP TIMER

BLUE BACK

OFF

CHILD LOCK

DECODER(EXT-2)

BACK

1 Press the

BACK.

buttons to choose BLUE

D0023-EN

2 Press theì buttons to choose ON.

To display the FEATURES menu:

To cancel the BLUE BACK function:

Press theì buttons to choose OFF.

1 Press the

button to display MENU

(main menu).

2 Press theë button to choose FEATURES.

Then press the button.

3 Press the

ting.

button to complete the set-

The menu disappears.

■ 6/((3#7,0(5

You can set the TV to automatically turn off after a specified

period of time.

■ &+,/'#/2&.

When there is a TV channel you wish your children not to

watch, you can use the CHILD LOCK function to lock out the

TV channel. Even when a child chooses a Programme

number (PR) in which a locked TV channel has been regis-

1 Press the

buttons to choose SLEEP

TIMER. Then press the

button.

A Sub-menu of the SLEEP TIMER function appears.

tered, the screen will change to blue and displays (CHILD

LOCK) so the TV channel cannot be viewed. Unless you en-

ter a pre-set ID number by a special operation, the lock can-

not be released and the child cannot view the TV channel

programmes.

SLEEP TIMER

120

OFF

7R#VHW#WKH#&+,/'#/2&.#IXQFWLRQ

BACK

1 Press the ë buttons to choose CHILD

LOCK. Then press the& button.

D0024-EN

“SET ID NO.” (ID number setting screen) appears.

2 Press the

time.

buttons to set the period of

SET ID NO.

0000

You can set the period of time a maximum of 120 min-

utes (2 hours) in 10 minute increments.

To cancel the SLEEP TIMER function:

BACK

Press the ï button to set a period of time to “OFF.”

D0025-EN

3 Press the

tings.

button to complete the set-

2 Set the ID number to your liking.

The menu disappears.

1 Press theë buttons to choose a number.

2 Press theì buttons to move the cursor.

Note:

• One minute before the SLEEP TIMER function turns

off the TV, “GOOD NIGHT!” appears.

• The SLEEP TIMER function cannot be used to turn

off the TV’s main power.

3 Press the

button.

The Sub-menu of CHILD LOCK appears.

• When the SLEEP TIMER function is on, you can dis-

play the Sub-menu of the SLEEP TIMER function

again to confirm and/or change the remaining peri-

od of time of the SLEEP TIMER function. Press the

CHILD LOCK

CH / CC

BBC1

button to exit the menu after confirming and / or

changing the remaining time.

LOCK

BACK

D0026-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

4 Press the ë buttons to choose a TV

Note:

channel.

• Even if you reset the lock temporarily, it does not

mean that the CHILD LOCK function set for the TV

channel is cancelled. The next time anyone at-

tempts to view the TV channel, it will be locked

again.

Every time you press the ë buttons, the Programme

number (PR) changes, and the picture of the TV channel

registered in the Programme number (PR) is displayed

on the screen.

• When you would like to cancel the CHILD LOCK

function, you must perform the operation “To set the

CHILD LOCK function” again.

• To disable easy choosing of a Programme number

(PR) in which a locked TV channel has been regis-

tered, the Programme number (PR) has been set

5 Press the blue button and set the CHILD

LOCK function.

(CHILD LOCK) appears and the TV channel is locked.

To reset the CHILD LOCK function:

that it cannot be chosen by the

operation buttons at the TV.

buttons or the

Press the blue button again.

(CHILD LOCK) disappears.

• To disable easy resetting of the lock, “ID NO.” (ID

NO. input screen) is set so that it cannot appear un-

6 Press the

ting.

button to complete the set-

less you press the

(Information) button.

The menu disappears.

■ '(&2'(5#+(;705,#

Only when connecting a Decoder with a T-V LINK compatible

VCR connected to the EXT-2 terminal, you can use this func-

tion. To operate this function, see “Using the DECODER

(EXT-2) function” on page 29.

Note:

• To disable easy resetting of the CHILD LOCK func-

tion, the menu disappears by choosing the CHILD

LOCK function and pressing the

ordinary menu operation.

button as in the

Caution:

• If you have not connected a Decoder with a T-V LINK com-

patible VCR connected to the EXT-2 terminal, setting this

function to “ON” by mistake causes the picture/sound of a

TV channel you are currently viewing not to be issued.

7R#YLHZ#D#ORFNHG#79#FKDQQHO

1 Choose a Programme number (PR) in

which a TV channel locked with the

Number buttons or PR LIST.

The screen changes to blue and the (CHILD LOCK)

appears. You cannot view the TV channel.

D0027-EN

2 Press the

(Information) button to dis-

play “ID NO.” (ID NO. input screen).

ID NO . :

D0028-EN

3 Press the Number buttons to enter the ID

number.

The lock is temporarily released so you can view the TV

channel.

If you have forgotten the ID number:

Perform step 1 of “To set the CHILD LOCK function”. Af-

ter confirming the ID number, press the

the menu.

button to exit

Download from Www.Somanuals.com. All Manuals Search And Download.

,167$//

3 Press the blue button to start the AUTO

PROGRAM function.

INSTALL

LANGUAGE

AUTO PROGRAM

EDIT / MANUAL

The AUTO PROGRAM menu appears and received TV

channels are automatically registered in the Programme

numbers (PR).

BACK

AUTO PROGRAM

EDIT

CH / CC

CH 10

20%

D0029-EN

BBC1

To display the INSTALL menu:

BACK

1 Press the

button to display MENU

(main menu).

BACK

INSERT

DELETE

MANUAL

MOVE

2 Press the

button to choose the IN-

D0004-EN

STALL menu. Then press the

button.

If “ACI START/ACI SKIP” appears in the AUTO PRO-

GRAM menu:

■ /$1*8$*(

You can choose the language you want to use for the on-

screen display from the language list in a menu.

You can use the ACI (Automatic Channel Installation)

function to decode the ACI data and complete the regis-

tration of all the TV channels in a short period of time.

For details of the ACI function and how to use it, refer to

“Using the ACI function” on page 28.

1 Press the

buttons to choose LAN-

If you don’t want to use the ACI function, press the ë

GUAGE. Then press the

A sub-menu of the LANGUAGE function appears.

button.

buttons to choose ACI SKIP and then press

To cancel the AUTO PROGRAM function:

LANGUAGE

Press the

button.

4 After the TV channels have been regis-

tered in the Programme numbers (PR), the

EDIT menu appears.

BACK

You can proceed to edit the Programme numbers (PR)

using the EDIT/MANUAL function. For details, see “ED-

IT/MANUAL” on page 24.

D0002(E)-EN

When not using the EDIT/MANUAL function:

2 Press the

and

buttons to choose

If you do not need to use the EDIT/MANUAL function, go

to the next step.

a language.

5 Press the

button to display the T-V

3 Press the

ting.

button to complete the set-

LINK menu.

The menu disappears.

T-V LINK

DOWNLOAD TV

VCR

■ $872#352*5$0

You can automatically register the TV channels which can be

received well at your residence in the TV’s Programme num-

bers (PR) by performing the following.

BACK

EXIT

D0005-EN

1 Press the

buttons to choose AUTO

6 Operate the T-V LINK menu according to

the type of VCR connected to the EXT-2

terminal.

PROGRAM. Then press the

The COUNTRY menu appears as a sub-menu of the

AUTO PROGRAM function.

There are two COUNTRY menus. Pressing the yellow

button changes the COUNTRY menu as follows:

button.

When a T-V LINK compatible VCR is not con-

nected:

Press the

button to exit the T-V LINK menu.

The T-V LINK menu disappears, and all the settings are

completed.

BACK

START

When a T-V LINK compatible VCR is connected:

D0003-EN

Follow the operating procedure “Downloading the data

to VCR” on page 28 to transmit the Programme number

(PR) data to the VCR.

2 Press the

and

buttons to choose

the country where you are now located.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALL

1 Press the

buttons to choose EDIT/

Note:

MANUAL. Then press the

button.

• When your TV can detect the TV channel name from

the TV channel broadcast signal, it automatically

registers the TV channel name (ID) to the Pro-

gramme number (PR) in which the TV channel has

been registered.

• If a TV channel you want to view is not set to a Pro-

gramme number (PR), manually set it using the

MANUAL function. For details, see “EDIT/MANUAL”

on page 24.

EDIT

CH / CC

BBC1

•

The TV channel is not registered in Programme number

PR 0 (AV). When you want to register a TV channel to PR

0 (AV) manually set it using the MANUAL function. For

details, see “EDIT/MANUAL” on page 24.

BACK

MOVE

INSERT

DELETE

MANUAL

D0038-EN

2 Follow the operation description of a func-

tion you want to use and operate the func-

tion.

■ (',720$18$/

The EDIT/MANUAL functions are divided into two types: ed-

iting of the current Programme numbers (PR) (EDIT func-

tions) and manual registration of a TV channel you want to

view to the Programme number (PR) (MANUAL function).

The details about these functions are as follows:

3 Press the

tings.

button to complete the set-

MOVE:

The T-V LINK menu appears.

This function changes a Programme number (PR) of a TV

channel.

T-V LINK

DOWNLOAD TV

VCR

ID:

This function registers a Channel name (ID) to a TV channel.

BACK

INSERT:

This function adds a new TV channel in the current Pro-

gramme numbers (PR) list by using the CH/CC number.

EXIT

D0005-EN

DELETE:

This function deletes a unnecessary TV channel.

4 Operate the T-V LINK menu according to

the type of VCR connected to the EXT-2

terminal.

MANUAL:

This function manually registers a new TV channel in a Pro-

gramme number (PR).

When a T-V LINK compatible VCR is not con-

nected:

Caution:

• Using the MOVE, DELETE or INSERT function rewrites the

current Programme numbers (PR) list. Resultingly, the Pro-

gramme number (PR) of some of the TV channels will

change.

Press the

button to exit the T-V LINK menu.

The T-V LINK menu disappears and all the settings are

completed.

When a T-V LINK compatible VCR is connected:

• Using the MANUAL function for a TV channel for which the

CHILD LOCK function has been set cancels the CHILD

LOCK function for the TV channel.

Follow the operating procedure “Downloading the data

to VCR” on page 28 to transmit the Programme number

(PR) data to the VCR.

• Using the MANUAL function for a TV channel for which the

DECODER (EXT-2) function has been set to ON returns the

setting of the DECODER (EXT-2) function for the TV chan-

nel to OFF.

• When a TV channel has already been registered in PR 99,

using the INSERT function deletes the TV channel.

029(

1 Press the

channel.

buttons to choose a TV

Note:

• For Programme number PR 0, “AV” appears in the Pro-

Every time you press the

buttons, the Programme

gramme numbers (PR) list.

number (PR) is changed over, and the picture of the TV

channel registered in the Programme number (PR) ap-

pears on the screen.

• An EXT terminal number does not appear in the Pro-

gramme numbers (PR) list.

• The CH/CC number is a number unique to the TV and

corresponding to the Channel number of a TV channel.

For the relationship of a Channel number and a CH/CC

number, see “CH/CC NUMBER” on page 33.

•

You cannot use the INSERT function if you do not know a

Channel number of a TV channel. Use the MANUAL func-

tion to register a TV channel in the Programme number (PR).

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALL

2 Press the button to start the MOVE func-

4 Press the blue button to display the ID LIST

(channel name list).

tion.

ID LIST

EDIT

CH / CC

MBC

MCM

MDR

MOVIE

MTV

BBC1

MTV3

BACK

STORE

D0033-EN

D0030-EN

5 Press the

nel name (ID).

To cancel the ID function:

Press the (Information) button.

buttons to choose the Chan-

3 Press the

buttons to choose a new

Programme number (PR).

To cancel the MOVE function:

Press the

(Information) button.

6 Press the

button to register a Channel

4 Press the

button to change the Pro-

name (ID) to a TV channel.

gramme number (PR) of a TV channel to a

new Programme number (PR).

Note:

• You can register your unique Channel name (ID) to

the TV channel. When step 3 is completed, do not

go to step 4, but press the

buttons to move the

buttons to choose a character

for completing the Channel name (ID). Then press

the button to register the Channel name (ID) to

1 Press the

channel.

buttons to choose a TV

cursor and the

Every time you press the

buttons, the Programme

the TV channel.

number (PR) is changed over, and the picture of the TV

channel registered in the Programme number (PR) ap-

pears on the screen.

,16(57

Preparation:

2 Press the red button to start the ID func-

tion.

• A CH/CC number unique to this TV and corresponding to

the Channel number of a TV channel is required. Find the

EDIT

corresponding CH/CC number from

table “CH/CC

CH / CC

NUMBER” on page 33 based on the Channel number of the

TV channel.

BBC1

• When the COUNTRY setting is not FRANCE, use a two-digit

CH/CC number. When the COUNTRY setting is FRANCE,

use a three-digit CH/CC number.

• Only when you add a TV channel (SECAM-L system) from

a French station, be sure to set COUNTRY to FRANCE. If

the COUNTRY setting is not FRANCE, follow the descrip-

tion “Changing the COUNTRY setting” on page 28 to

change the COUNTRY setting to FRANCE, then start the

INSERT function.

ID LIST

BACK

D0031-EN

3 Press the

buttons to choose the first

1 Press the

buttons to choose a Pro-

character of a Channel name (ID) you want

to attach to the TV channel.

gramme number (PR) for which you will

EDIT

CH / CC

BBC1

ID LIST

BACK

D0032-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALL

2 Press the green button and start the IN-

SERT function.

2 Press the blue button to activate the MAN-

UAL function.

At the right side following the CH/CC number, the SYS-

TEM (broadcasting system) of the TV channel appears.

EDIT

CH / CC

BBC1

MANUAL

CH / CC

BBC1

BACK

(

)

01 B / G

CH / CC

BACK

SYSTEM

D0034-EN

FINE

D0035-EN

3 Press the

buttons to choose “CC” or

“CH” according to the CH/CC number of

the TV channel.

To cancel the MANUAL function:

Press the (Information) button.

When the COUNTRY setting is FRANCE:

Choose “CH1”, “CH2”, “CC1” or “CC2”.

3 Press the button to choose the SYSTEM

(broadcasting system) for a TV channel

you want to register.

To cancel the INSERT function:

Press the

(Information) button.

TV channel (SECAM-L system) from a French

station:

Set the SYSTEM to “L”. If it is set to one other than “L”,

you cannot receive the TV channel of the SECAM-L sys-

tem.

4 Press the Number buttons to enter the re-

maining CH/CC number.

The TV shifts to registration mode.

When the registration is completed, the picture of the TV

channel appears on the screen.

Other TV channels:

If you do not know the correct broadcasting system, set

the SYSTEM to “B/G”. If “B/G” is not correct, it results in

the fact that you will not hear the sound normally when

the TV detects a TV channel. In this case, retry to set the

SYSTEM again correctly so that no problem arises.

Note:

• The CH/CC number is a number indicating the

broadcast frequency to the TV. If the TV cannot de-

tect the TV channel corresponding to the broadcast

frequency indicated by the CH/CC number, a pic-

ture in the no-signal state appears.

4 Press the green or red button to search for

a TV channel.

Scanning stops when the TV finds a TV channel. Then

the TV channel is displayed.

'(/(7(

1 Press the ë buttons to choose a TV

5 Press the green or red button repeatedly

until the TV channel you want appears.

channel.

Every time you press the ë buttons, the Programme

number (PR) is changed over, and the picture of the TV

channel registered in the Programme number (PR) ap-

pears on the screen.

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV chan-

nel.

If you cannot hear the normal sound even when

the picture of the TV channel appears normal-

ly:

2 Press the yellow button to delete the TV

channel.

The TV channel is deleted from the Programme num-

bers (PR) list.

The SYSTEM setting is wrong. Press the button and

choose a SYSTEM that has normal sound.

0$18$/

6 Press the

button and register the TV

Preparation:

channel to a Programme number (PR).

The normal EDIT menu is resumed.

• As long as you register the TV channel (SECAM-L system)

from a French station, be sure to set the COUNTRY setting

to FRANCE. If the COUNTRY setting is not FRANCE, follow

the description “Changing the COUNTRY setting” on

page 28 to change the COUNTRY setting to FRANCE, then

start the MANUAL function.

1 Press the

buttons to choose a Pro-

gramme number (PR) to which you want to

Download from Www.Somanuals.com. All Manuals Search And Download.

'(02

DEMO

OFF

BACK

D0036-EN

To display the DEMO menu:

1 Press the

button to display MENU

(main menu).

2 Press the ë button to choose DEMO.

Then press the button.

The DEMO function automatically demonstrates some of the

TV functions.

1 Press the ë buttons to choose ON.

2 Press the

tings.

button to complete the set-

The DEMO function is set to ON, and the demonstration

will start.

To stop the demonstration:

Press one of the buttons on the remote control.

When the DEMO function is set to ON:

Each time the TV is turned on, the demonstration starts

automatically. If you do not want that to happen, perform

the following operations to cancel the DEMO function:

1 Display the DEMO menu again.

2 Press the ë buttons to choose OFF.

3 Press the

function.

button to cancel the DEMO

Download from Www.Somanuals.com. All Manuals Search And Download.

$'',7,21$/#0(18#23(5$7,216

■ 8VLQJ#WKH#$&,#IXQFWLRQ

This TV has an ACI function which decodes the ACI (auto-

matic Channel Installation) data.

■ 'RZQORDGLQJ#WKH#GDWD#WR#9&5

You can transmit to the latest Programme numbers (PR) data

to the VCR with the T-V LINK function.

Using the ACI function allows all TV channels transmitted

from the cable TV station to be properly registered quickly ac-

cording to the data from the cable TV station.

Caution:

• Only when the T-V LINK compatible VCR is connected to

the EXT-2 terminal, this operation is enabled.

Caution:

• Only when the T-V LINK menu is being displayed, this oper-

ation is enabled.

If your cable TV station broadcasts ACI data and if “ACI

START/ACI SKIP” appears in the AUTO PROGRAM menu,

the ACI function is enabled. In all other cases, it is disabled.

T-V LINK

1 Press the ë button to choose ACI

DOWNLOAD TV

VCR

START. Then press the

the ACI function.

button to start

BACK

When you don't want to use the ACI function:

Press the ë button to choose ACI SKIP and then

EXIT

D0005-EN

press the

button.

If the AUTO PROGRAM menu changes to another

menu:

Depending on your cable TV station, there may be a

broadcast selection menu set up by the cable TV station.

1 Turn on the VCR.

2 Press the button.

The data transmission begins.

Follow the menu indications and use the ì and ë

buttons to operate the menu. After you have made the

DOWNLOAD TV

VCR

setting, press the

button.

TRANSFER. . . . .

If “ACI ERROR” is displayed in the AUTO PROGRAM

menu:

“ACI ERROR” denotes that the ACI function is not work-

D0037-EN

The T-V LINK menu disappears once the data transmis-

sion ends.

ing properly. Press the

tion again.

button to start the ACI func-

When the T-V LINK menu is changed over to

another menu:

The menu operation at the TV side is completed and it is

shifted to the menu operation at the VCR side. Refer to

the VCR Instruction Manual and operate the VCR.

If “ACI ERROR” still appears even after you have tried to

start the ACI function several times, press the button

to start the AUTO PROGRAM function. It does not cause

any problem because all the TV channels are registered

to the Programme numbers (PR) by the AUTO PRO-

GRAM function.

Note:

2 When the settings are completed, the EDIT

menu is displayed. Return to the instruc-

tions that you were reading before, and

continue the operation.

• If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, ensure the following three items are cor-

rect; then press the

mission.

button to retry data trans-

− Has the T-V LINK compatible VCR been connect-

ed to the EXT-2 terminal?

When the “Initial Settings” has been made:

− Has the VCR power been turned on?

Return to step 6 of “Initial Settings” on page 4.

− Does the SCART cable that is connected to the

EXT-2 terminal to T-V LINK compatible VCR have

all proper connections?

When the “AUTO PROGRAM” has been made:

Return to step 4 of “AUTO PROGRAM” on page 23.

Note:

■ &KDQJLQJ#WKH#&28175<#VHW0

• If you have any questions about the items in the

Broadcast Selection menu or how to operate the

menu, please contact your cable TV station.

• When the cable TV broadcast reception is poor, the

ACI function will not work properly.

• If there is an error in the ACI data itself, the TV chan-

nel cannot be registered properly. If this happens,

turn the ACI function off (ACI SKIP) and use the

AUTO PROGRAM function. Alternatively, use the

EDIT/MANUAL function to correct the Programme

number (PR) setting.

WLQJ

After the AUTO PROGRAM function is completed, you can

change the country you have already set by using the AUTO

PROGRAM function.

When registering the TV channels for French broadcast

stations (SECAM-L system), perform this operation to change

the country.

1 Display the INSTALL menu.

When the EDIT menu is currently being dis-

played:

Press the

menu.

(Information) to return to the INSTALL

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDITIONAL MENU OPERATIONS

5 Press the buttons to choose DECOD-

2 Press the ë buttons to choose AUTO

PROGRAM. Then press the button.

ER (EXT-2) . Then press the

choose ON.

buttons to

A COUNTRY menu appears as a sub-menu of the

AUTO PROGRAM function.

There are two COUNTRY menus. Pressing the yellow

button changes the COUNTRY as follows:

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the buttons to choose OFF.

6 Press the

ting.

button to complete the set-

BACK

START

The T-V LINK menu appears.

D0003-EN

T-V LINK

3 Press the ì and the ë buttons to

DOWNLOAD TV

VCR

choose a country.

BACK

4 Press the

ting.

button to complete the set-

EXIT

D0005-EN

The menu disappears.

To return to the INSTALL menu from the COUNTRY

menu:

7 Follow the operating procedure “Down-

loading the data to VCR” on page 28 to

transmit the Programme number (PR) data

to the VCR.

Press the

ton.

(Information) button instead of the

but-

■ 8VLQJ#WKH#'(&2'(5#+(;705,##

8 If you have another TV channel capable of

being unscrambled with a Decoder, repeat

steps 2 through 7.

IXQFWLRQ

When connecting a Decoder with a T-V LINK compatible VCR

connected to the EXT-2 terminal, use the DECODER (EXT-2)

function to unscramble the scrambled TV channels.

Note:

• If for some reason the DECODER (EXT-2) function

has been set to “ON” but the TV channel cannot be

unscrambled, check the following:

1 Turn on the Decoder power.

− Has the Decoder been connected to the VCR

properly according to the VCR and Decoder In-

struction Manuals?

2 Display the TV channel capable of being

unscrambled with the Decoder on the TV.

− Has the Decoder power been turned on?

Even if the Decoder is functioning, a scrambled picture

appears at this time.

−

Can the TV channel be unscrambled with a De-

coder?

3 Press the

button to display the MENU.

− Is it necessary to change the VCR settings in or-

der to connect the Decoder? Confirm that the

VCR is set properly by rechecking the VCR In-

struction Manual.

The MENU (main menu) appears.

4 Press the

buttons to choose FEA-

TURES. Then press the

button.

The FEATURES menu appears.

FEATURES

SLEEP TIMER

BLUE BACK

OFF

CHILD LOCK

DECODER(EXT-2)

BACK

D0023-EN

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDITIONAL MENU OPERATIONS

■ 6HWWLQJ#WKH#63($.(5#IXQFWLRQ#

+([FOXGLQJ#$95;:+8(8,

Turn off the SPEAKER function so that TV speakers will not

issue any sound.

1. Press the

button to display the MENU

(main menu).

2. Press the

buttons to choose SOUND

SETTING. Then press the

display the SOUND SETTING menu.

button to

The SOUND SETTING menu appears.

SOUND SETTING

STEREO/

BASS

TREBLE

BALANCE

BBE

OFF

HYPER SOUND

SPEAKER

BACK

D0019-EN

3. Press the

buttons to choose SPEAK-

ER. Then press the

OFF.

buttons to choose

The sound from the TV speakers are cut.

4. Press the

tings.

button to complete the set-

The menu disappears.

Note:

• The ì buttons of the TV remote control and the D

(volume) buttons at the front panel of your TV set can be

used to control the volume of each speaker simultane-

ously.

• Setting the volume of the amplifier too high may damage

the front speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

$'',7,21$/#35(3$5$7,21

■ &RQQHFWLQJ#WKH#H[WHUQDO#GHYLFHV

Connect the devices to the TV, paying attention to the follow-

ing connection diagram.

1VCR (composite signal)

2VCR (composite signal/S-VIDEO signal)

3T-V LINK compatible VCR (composite signal/

S-VIDEO signal)

4Decoder

5DVD player (composite signal/S-VIDEO signal)

6DVD player (composite signal/RGB signal)

7TV game (composite signal/RGB signal)

8TV game (composite signal/S-VIDEO signal)

9Headphones

Before connecting anything:

• Read the manuals provided with the devices. Depending

on the devices, the connection method may differ from

the figure. In addition, the device settings may be

changed depending on the connection method to secure

proper operation.

• Turn off all the devices including the TV.

• The “SPECIFICATIONS” on page 37 contains the details

of the EXT terminals. If you are connecting a device not

listed in the following connection diagram, see the table

to choose the best EXT terminal.

0Camcorder (composite signal/S-VIDEO signal)

-SCART cable

• Note that connecting cables are not supplied.

=Audio cable

~Video cable

!S-VIDEO cable

< AV32L2EU/AV28L2EU >

< AV32X10EU/AV28X10EU >

< AV28WH5EU >

Behind the Cover

Side of the TV

Behind the Cover

EXT-2

EXT-3

EXT-1

Back of the TV

EXT-2

EXT-3

EXT-1

AUDIO OUT

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDITIONAL PREPARATION

'HYLFHV#ZKLFK#FDQ#RXWSXW#WKH#609,'(2

VLJQDO#+<2&#VLJQDO,#VXFK#DV#D#609+6#9&5

■

&RQQHFWLQJ#6SHDNHUV2$PSOLILHU#

+([FOXGLQJ#$95;:+8(8,

Connect the device to an EXT terminal other than the EXT-1

terminal.

While referring to the Audio equipment connection diagram,

connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound

instead of the TV speakers. For details of how to operate

them, see “Setting the SPEAKER function (Excluding

AV28WH5EU)” on page 30.

You can choose a video input signal from the S-VIDEO signal

(Y/C signal) and regular video signal (composite signal). For

details of how to operate the device, see “S-IN (S-VIDEO in-

put)” on page 19.

709#/,1.#FRPSDWLEOH#9&5

Be sure to connect the T-V LINK compatible VCR to the

EXT-2 terminal. If not, the T-V LINK function will not work

properly.

Before connecting anything:

• Read the manuals provided with the amplifier and speak-

ers.

• Turn the TV and Amplifier off.

• To prevent magnetism from the speakers adversely ef-

fecting the TV screen, use magnetic-shielded speakers

for the front speakers.

Note:

• When connecting a T-V LINK compatible VCR to the

EXT-2 terminal, be sure to connect the Decoder to the

VCR. If not, the T-V LINK function may not work properly.

After you have registered TV channels to the Programme

numbers (PR), set the DECODER (EXT-2) function for the

Programme number (PR) to ON in order to unscramble a

scrambled TV channel. For details of operation, see “Us-

ing the DECODER (EXT-2) function” on page 29.

• Note that connecting cables are not supplied.

Back of the TV

&RQQHFWLQJ#KHDGSKRQHV

Connect the headphones with a stereo mini-jack (of 3.5mm in

diameter) to the headphone jack at the TV front panel.

AUDIO OUT

Note:

1Amplifier

2Front speakers (Magnetic-shielded type)

• When you connect the headphones, the TV speakers is-

sue no sound.

Note:

• The output from the AUDIO OUT terminal is not interrupt-

ed by headphone connection to the TV. You cannot cut

the sound from the front speaker even if you connect a

headphone to the TV.

9LGHR2VRXQG#VLJQDO#RXWSXW#IURP#WKH

(;705#WHUPLQDO

You can arbitrarily change over the output of the video/sound

signal from the EXT-2 terminal. It is useful when you want to

dub the video/sound from another device on the VCR con-

nected to the EXT-2 terminal. For details on how to do this op-

eration, see “DUBBING” on page 20.

79#RXWSXW#IURP#WKH#(;704#WHUPLQDO

The output of video/sound signal of a TV channel you are cur-

rently viewing is always output from the EXT-1 terminal.

Note:

• Changing over a Programme number (PR) also changes

over the TV output from the EXT-1 terminal.

• The video/sound signal from an EXT terminal cannot be

output.

• Teletext programmes cannot be output.

Download from Www.Somanuals.com. All Manuals Search And Download.

&+2&&#180%(5

When you want to use the INSERT function on page 25, find the CH/CC number corresponding to the Channel number of the TV

channel from this table.

Channel

E40, R40

E41, R41

E42, R42

E43, R43

E44, R44

E45, R45

E46, R46

E47, R47

E48, R48

E49, R49

E50, R50

E51, R51

E52, R52

E53, R53

E54, R54

E55, R55

E56, R56

E57, R57

E58, R58

E59, R59

E60, R60

E61, R61

E62, R62

E63, R63

E64, R64

E65, R65

E66, R66

E67, R67

E68, R68

E69, R69

Channel

S31

CH 02 / CH 202

CH 03 / CH 203

CH 04 / CH 204

CH 05 / CH 205

CH 06 / CH 206

CH 07 / CH 207

CH 08 / CH 208

CH 09 / CH 209

CH 10 / CH 210

CH 11 / CH 211

CH 12 / CH 212

CH 21 / CH 221

CH 22 / CH 222

CH 23 / CH 223

CH 24 / CH 224

CH 25 / CH 225

CH 26 / CH 226

CH 27 / CH 227

CH 28 / CH 228

CH 29 / CH 229

CH 30 / CH 230

CH 31 / CH 231

CH 32 / CH 232

CH 33 / CH 233

CH 34 / CH 234

CH 35 / CH 235

CH 36 / CH 236

CH 37 / CH 237

CH 38 / CH 238

CH 39 / CH 239

E2, R1

CH 40 / CH 240

CH 41 / CH 241

CH 42 / CH 242

CH 43 / CH 243

CH 44 / CH 244

CH 45 / CH 245

CH 46 / CH 246

CH 47 / CH 247

CH 48 / CH 248

CH 49 / CH 249

CH 50 / CH 250

CH 51 / CH 251

CH 52 / CH 252

CH 53 / CH 253

CH 54 / CH 254

CH 55 / CH 255

CH 56 / CH 256

CH 57 / CH 257

CH 58 / CH 258

CH 59 / CH 259

CH 60 / CH 260

CH 61 / CH 261

CH 62 / CH 262

CH 63 / CH 263

CH 64 / CH 264

CH 65 / CH 265

CH 66 / CH 266

CH 67 / CH 267

CH 68 / CH 268

CH 69 / CH 269

CC 01 / CC 201

CC 02 / CC 202

CC 03 / CC 203

CC 04 / CC 204

CC 05 / CC 205

CC 06 / CC 206

CC 07 / CC 207

CC 08 / CC 208

CC 09 / CC 209

CC 10 / CC 210

CC 11 / CC 211

CC 12 / CC 212

CC 13 / CC 213

CC 14 / CC 214

CC 15 / CC 215

CC 16 / CC 216

CC 17 / CC 217

CC 18 / CC 218

CC 19 / CC 219

CC 20 / CC 220

CC 21 / CC 221

CC 22 / CC 222

CC 23 / CC 223

CC 24 / CC 224

CC 25 / CC 225

CC 26 / CC 226

CC 27 / CC 227

CC 28 / CC 228

CC 29 / CC 229

CC 30 / CC 230

CC 31 / CC 231

CC 32 / CC 232

CC 33 / CC 233

CC 34 / CC 234

CC 35 / CC 235

CC 36 / CC 236

CC 37 / CC 237

CC 38 / CC 238

CC 39 / CC 239

CC 40 / CC 240

CC 41 / CC 241

CC 75 / CC 275

CC 76 / CC 276

CC 77 / CC 277

CC 78 / CC 278

CC 79 / CC 279

E3, ITALY A

E4, ITALY B, R2

E5, ITALY D, R6

E6, ITALY E, R7

E7, ITALY F, R8

E8, R9

S32

S33

S34

S35

S36

S37

E9, ITALY G

E10, ITALY H, R10

E11, ITALY H+1, R11

E12, ITALY H+2, R12

E21, R21

S38

S39

S10

S11

S12

S13

S14

S15

S16

S17

S18

S19

S20

S21

S22

S23

S24

S25

S26

S27

S28

S29

S30

S40

S41

E22, R22

Y, R3

Z, ITALY C, R4

Z+1, R5

Z+2

E23, R23

E24, R24

E25, R25

E26, R26

E27, R27

E28, R28

E29, R29

E30, R30

E31, R31

E32, R32

E33, R33

E34, R34

E35, R35

E36, R36

E37, R37

E38, R38

E39, R39

Frequency

(MHz)

Frequency

(MHz)

Channel

F41

F42

F43

F44

F45

F46

F47

F48

F49

F50

F51

F52

F53

F54

F55

F56

F57

F58

F59

F60

F61

F62

F63

F64

F65

F66

F67

F68

F69

CH 102

CH 103

CH 104

CH 105

CH 106

CH 107

CH 108

CH 109

CH 110

CH 121

CH 122

CH 123

CH 124

CH 125

CH 126

CH 127

CH 128

CH 129

CH 130

CH 131

CH 132

CH 133

CH 134

CH 135

CH 136

CH 137

CH 138

CH 139

CH 140

CH 141

CH 142

CH 143

CH 144

CH 145

CH 146

CH 147

CH 148

CH 149

CH 150

CH 151

CH 152

CH 153

CH 154

CH 155

CH 156

CH 157

CH 158

CH 159

CH 160

CH 161

CH 162

CH 163

CH 164

CH 165

CH 166

CH 167

CH 168

CH 169

CC 110

CC 111

CC 112

CC 113

CC 114

CC 115

CC 116

CC 123

CC 124

CC 125

CC 126

CC 127

CC 128

CC 129

CC 130

CC 131

CC 132

CC 133

CC 141

CC 142

CC 143

CC 144

CC 145

CC 146

CC 147

CC 148

CC 149

CC 150

CC 151

116 - 124

124 - 132

132 - 140

140 - 148

148 - 156

156 - 164

164 - 172

220 - 228

228 - 236

236 - 244

244 - 252

252 - 260

260 - 268

268 - 276

276 - 284

284 - 292

292 - 300

300 - 306

306 - 311

311 - 319

319 - 327

327 - 335

335 - 343

343 - 351

351 - 359

359 - 367

367 - 375

375 - 383

383 - 391

CC 152

CC 153

CC 154

CC 155

CC 156

CC 157

CC 158

CC 159

CC 160

CC 161

391 - 399

399 - 407

407 - 415

415 - 423

423 - 431

431 - 439

439 - 447

447 - 455

455 - 463

463 - 469

F10

F21

F22

F23

F24

F25

F26

F27

F28

F29

F30

F31

F32

F33

F34

F35

F36

F37

F38

F39

F40

Note:

• When two CH/CC numbers correspond to one Channel number, choose either one according to the current COUNTRY set-

ting. When the COUNTRY setting is other than FRANCE, choose a two-digit CH/CC number. When the COUNTRY setting is

FRANCE, choose a three-digit CH/CC number.

• Find the CH/CC number (CC110 to CC161) corresponding to the TV channel (SECAM-L system) from a French cable TV sta-

tion, based on the broadcast frequency of the TV channel. When you do not know the broadcast frequency, please contact

the cable TV station.

• The CH/CC numbers of CH102-CH169 and CC110-CC161 correspond to the TV channels being broadcast by a SECAM-L

system. The other CH/CC numbers correspond to the TV channels being broadcast by a method other than a SECAM-L sys-

tem.

Download from Www.Somanuals.com. All Manuals Search And Download.

79#%877216#$1'#3$576

■ )URQW#3DQHO

< AV32L2EU/AV28L2EU >

EXT-2

EXT-3

EXT-1

< AV28WH5EU >

< AV32X10EU/AV28X10EU >

1 Remote control sensor and ECO sensor

6 D (Volume) button

7 EXT-4 terminal

page 8

2 Power lamp

pages 3 and 6

pages 19 and 31

3 Main power button

8 HYPER SOUND lamp (Only AV32X10EU and AV28X10EU)

• The HYPER SOUND lamp lights while the HYPER SOUND

function is in use.

4 Headphone jack (mini jack)

page 31

page 8

9 ECO lamp (Only AV32X10EU and AV28X10EU)

• If you set the ECO MODE function to ON, the ECO lamp

lights.

^{5 P}∨^/∧ ^{buttons / –/+ buttons}

0 SLEEP TIMER lamp (Only AV32X10EU and AV28X10EU)

• The SLEEP TIMER lamp lights while the SLEEP TIMER

function is operating.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV BUTTONS AND PARTS / TROUBLESHOOTING

■ 5

EXT-2

EXT-3

EXT-1

AUDIO OUT

- Aerial socket

page 2

! EXT-3 terminal

pages 19 and 31

page 32

= EXT-1 terminal

pages 2, 19 and 31

@ AUDIO OUT terminal

(Excluding AV28WH5EU)

~ EXT-2 terminal

pages 2, 5, 19 and 31

7528%/(6+227,1*

If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired.

You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has

problems, you may think there is a problem with the TV itself.

Important:

• This Troubleshooting guide only covers problems whose cause are not easy to determine. If a question arise when you are

operating a function, read the page(s) corresponding to the operation of the function well, not this Troubleshooting guide.

• After you have followed the Troubleshooting description or the operating description of the functions concerned without any suc-

cess, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or

remove the rear cover of the TV.

,I#\RX#FDQQRW#WXUQ#RQ#WKH#79

• Is the AC plug connected to the AC outlet?

• Is the Power lamp lit? If not, press the Main power button.

3RRU#SLFWXUH

• If noise totally obscures the picture (snow), the aerial or aer-

ial cable may have trouble. Check the following to try to

solve the trouble:

Has the TV and aerial been connected properly?

Has the aerial cable been damaged?

Is the aerial pointed to the right direction?

Is the aerial itself faulty?

1R#SLFWXUH21R#VRXQG

• Have you chosen a TV channel whose reception is extreme-

ly bad? In this case, the BLUE BACK function will be activat-

ed, the entire screen becomes blue, and the sound is muted.

In spite of this, if you want to view the TV channel, follow the

description “BLUE BACK” on page 21 to try to change the

BLUE BACK function setting to OFF.

• If the TV or aerial receives interference from the other devic-

es, stripes or noise may appear in the picture. Move such

devices as an amplifier, personal computer, or a hair drier

that can cause interference away from your TV, or try

changing its location. If the aerial suffers interference from a

radio tower or high-voltage wire, please contact your local

dealer.

• Have you connected the headphones to the TV? Connect-

ing the headphones to the TV causes sounds not to be is-

sued from the TV speakers.

• Have you set the SPEAKER function to OFF? Follow the de-

scription “SPEAKER (Excluding AV28WH5EU)” on page 18

to confirm the SPEAKER function setting to try to solve the

problem.

• If the TV receives interference from signal reflecting from

mountains or building, double-pictures (ghosting) will occur.

Try to change the aerial’s direction or replace the antenna

with the one with better directionality.

• If the SYSTEM setting for a TV channel is incorrect, it may

prevent the sound from being issued. Follow the description

“EDIT/MANUAL” on page 24 to use the MANUAL function to

try to change the SYSTEM setting.

• Are your COLOUR SYSTEM settings for the TV channels

correct? Follow the description “COLOUR SYSTEM” on

page 17 to try to solve the trouble.

• Has COLOUR or BRIGHT been controlled properly? Follow

the description “Picture Adjustment” on page 15 to try to ad-

just them properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

• Videotaping teletext is not recommended because it may

• The TV may emit a crackling sound due to a sudden change

in temperature. It does not matter if a picture or sound does

not show any abnormality. If you hear crackling sounds fre-

quently while you are viewing the TV, other causes may be

assumed. For precautionary purposes, request your service

technician to inspect it.

not record correctly.

• When a white and bright still image (such as a white dress)

is displayed on the screen, the white part may look as if it

were coloured. It is a phenomenon unavoidable due to the

nature of the picture tube itself, and not due to a TV failure.

When the picture disappears from the screen, the unnatural

colours will also disappear.

• Touching the screen may cause you feel a slight electric

shock due to its static electricity. It is an unavoidable phe-

nomenon due to the construction of the picture tube. It is not

a problem with the TV. You can rest assured that this static

discharge does not have harmful influence over the human

body.

• When viewing images from commercially available video

software products, or videos from videotapes which have

been recorded improperly, the top of the image may be dis-

torted. This is due to the condition of the video signal, and

not because of malfunction.

• When a menu is displayed on the screen, the ZOOM mode

may be automatically changed to the FULL mode. This is

not a malfunction. When the menu disappears, the ZOOM

mode will return to the previously set ZOOM mode.

3RRU#VRXQG

• Have you adjusted BASS or TREBLE properly? If not, follow

the description “Sound Adjustment” on page 18 to try to ad-

just them properly.

• When the TV channel reception is poor, it can be hard to

hear the stereo or bilingual sound. In this case, follow the

description “STEREO / I•II” on page 18 to hear the sound

more easily by changing it to a mono sound.

2SHUDWLRQ#GLVDEOHG

• Have the batteries of the remote control become exhaust-

ed? Follow the description “Putting Batteries into the Re-

mote Control” on page 2 and replace them with new

batteries to try to solve the problem.

• Have you attempted to use the remote control at the sides

or rear of the TV or at a location more than seven meters

apart from the TV location? Operate the remote control in

the front of your TV or a location less than seven meters

from your TV to try to solve the problem.

• When you are viewing a teletext programme, you cannot op-

erate the menus. Press the

programme to the ordinary TV programme to try operating

the menus.

button to return the teletext

• If the TV operation becomes disabled suddenly, press the

Main power button on the TV and turn off the main power.

Try to press the Main power button again to turn on the main

power. If the TV returns to a normal state, it is not a failure.

2WKHU#FRQFHUQV

• When the SLEEP TIMER function operates, the TV is auto-

matically turned off. If the TV is turned off suddenly, try to

press the

(Standby) button to turn on the TV once again.

At this time, if the TV resumes a normal state, there is no

problem.

• When a WSS signal is included in the broadcast signal or

the signal from an external device, or when the TV is receiv-

ing a control signal from an external device, the ZOOM

mode will change automatically. When you want to return to

the previous ZOOM mode, press the

choose the ZOOM mode again.

button to

• If you bring a magnetised device such as a speaker near to

your TV, a picture may be warped or unnatural colors ap-

pear at the corners of the screen. In this case, keep the de-

vice apart from your TV. If the speakers causes such

phenomena, use the magnetic-shielded speakers instead.

• A picture may be tited due to the influence of the earth’s

magnetism. In this case, use the “PICTURE TILT (Excluding

AV28WH5EU)” on page 17 to complete the tilt.

• It takes a short period of time from the time an operation

such as changing channels is performed until an image is

displayed. This is not a malfunction. This is the time required

for the image to stabilize before it can be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

63(&,),&$7,216

Model

AV32L2EU*

AV28L2EU*

Item

Broadcasting systems

Colour systems

CCIR B/G, I, D/K, L

PAL, SECAM

•

The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies

• E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2, F2-F10,

F21-F69, R1-R12, R21-R69

•

French cable TV channel of broadcast frequencies 116 - 172 MHz and 220 - 469 MHz

Sound-multiplex systems

Teletext systems

A2 (B/G, D/K), NICAM (B/G, I, D/K, L) system

FLOF (Fastext), TOP, WST (World Standard System)

220 - 240 V AC, 50 Hz

Power requirements

Power consumption

Maximum: 189 W, Average: 140 W,

Standby: 2.8 W

Maximum: 183 W, Average: 127 W,

Standby: 2.8 W

Picture tube size

Audio output

Speakers

Viewable area 76 cm (measured diagonally)

Rated Power output: 7.5 W + 7.5 W

(20 cm × 4 cm) oval × 2

Viewable area 66 cm (measured diagonally)

EXT-1 terminal

Euroconnector (21-pin, SCART)

•

Video input, Audio L/R inputs and RGB inputs are available.

TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

•

Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are available.

Video and Audio L/R outputs are available.

T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

•

RCA connectors × 3

S-VIDEO connector × 1

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

•

Variable audio L/R outputs are available.

Variable out 0-1 Vrms, low impedance

Headphone jack

Dimensions (W × H × D)

Weight

Stereo mini-jack (3.5 mm in diameter)

901 mm × 556 mm × 557 mm

53.8 kg

800 mm × 500 mm × 498 mm

41 kg

Accessories

Remote control unit x 1 (RM-C54)

AAA/R03 dry cell battery × 2

* A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating the colour

of the TV set.

Design and specifications subject to change without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration pur-

pose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this

constitutes an infringement of copyright.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

Model

AV32X10EU*

AV28X10EU*

AV28WH5EU*

Item

Broadcasting systems

Colour systems

CCIR B/G, I, D/K, L

PAL, SECAM

•

The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies

• E2-E12, E21-E69, S1-S41, X, Y, Z, Z+1, Z+2, ITALY A-H, ITALY H+1, ITALY H+2, F2-F10,

F21-F69, R1-R12, R21-R69

•

French cable TV channel of broadcast frequencies 116 - 172 MHz and 220 - 469 MHz

Sound-multiplex systems

Teletext systems

A2 (B/G, D/K), NICAM (B/G, I, D/K, L) system

FLOF (Fastext), TOP, WST (World Standard System)

220 - 240 V AC, 50 Hz

Power requirements

Power consumption

Maximum: 189 W,

Average: 140 W,

Standby: 2.8 W

Maximum: 183 W,

Average: 127 W,

Standby: 2.8 W

Maximum: 165 W,

Average: 112 W,

Standby: 2.8 W

Picture tube size

Viewable area 76 cm

(measured diagonally)

Viewable area 66 cm (measured diagonally)

Audio output

Speakers

Rated Power output: 7.5 W + 7.5 W

(16 cm × 4 cm) oval × 2

Rated Power output: 5 W + 5 W

10 cm round × 2

EXT-1 terminal

Euroconnector (21-pin, SCART)

•

Video input, Audio L/R inputs and RGB inputs are available.

TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

•

Video input, S-VIDEO (Y/C) input, Audio L/R inputs and RGB inputs are available.

Video and Audio L/R outputs are available.

T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

•

RCA connectors × 3

S-VIDEO connector × 1

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

•

Variable audio L/R outputs are available.

Variable out 0-1 Vrms, low impedance

—

Headphone jack

Dimensions (W × H × D)

Weight

Stereo mini-jack (3.5 mm in diameter)

855 mm × 550 mm × 568 mm 780 mm × 509 mm × 499 mm 716 mm × 489 mm × 496 mm

54.2 kg 40.2 kg 34.3 kg

Accessories

Remote control unit x 1 (RM-C54 (Silver) or RM-C50 (Black) is supplied.)

AAA/R03 dry cell battery × 2

* A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating the colour

of the TV set.

Design and specifications subject to change without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration pur-

pose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this

constitutes an infringement of copyright.

VICTOR COMPANY OF JAPAN, LIMITED

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Washer IWDD 7143 S User Manual
Insignia Radio NS HDRAD User Manual
Jabra Headphones BT5020 User Manual
Jenn Air Cooktop JED8230ADB User Manual
JVC Car Video System KV MR9010 User Manual
JVC CD Player KW XC550 User Manual
Kenmore Sewing Machine 19501 User Manual
KitchenAid Indoor Furnishings KKFV01LPCR User Manual
KitchenAid Refrigerator W10681447A User Manual
Kompernass Battery Charger TLG 1000 A1 User Manual