JVC CRT Television AV 30W777 User Manual

Color Television Users Guide  
For Models:  
AV-30W777  
AV-30W767  
TV CATV VCR DVD  
POWER  
INPUT  
SLEEP  
TIMER DISPLAY C.C.  
THEATER PRO  
1
2
3
6
9
VIDEO STATUS  
4
5
ASPECT  
7
8
0
SUB CH  
TUNE  
RETURN+  
/TV  
FAVORITE ML/MTS SOUND GUIDE  
MUTING  
OK  
CH  
CH  
+
VOL  
VOL  
+
MENU  
BACK  
VCR CHANNEL VCR/DVD  
TV/VCR  
POWER  
PREV NEXT  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1272G  
TV  
Illustration of AV-30W777 and RM-C1272G  
Important Note:  
In the spaces below, enter the model and serial number of your television (located  
at the rear of the television cabinet). Staple your sales receipt or invoice to the  
inside cover of this guide. Keep this user’s guide in a convenient place for future  
reference. Keep the carton and original packaging for future use.  
Model Number:  
LCT2034-001A-A  
0506TNH-II-IM  
Serial Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
• As an “ENERGY STAR ” partner,  
JVC has determined that this  
product or product model meets the  
®
“ENERGY STAR ” guidelines for energy  
efficiency.  
Important Safeguards  
CAUTION:  
Please read and retain for your safety.  
Electrical energy can perform many useful functions. This TV set has been engineered and  
manufactured to assure your personal safety. But improper use can result in potential  
electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this  
TV set, observe the following basic rules for its installation, use and servicing. Also follow all  
warnings and instructions marked on your TV set.  
INSTALLATION  
(POLARIZED-TYPE)  
1 Your TV set is equipped with a polarized AC line plug (one  
blade of the plug is wider than the other). This safety feature  
allows the plug to fit into the power outlet only one way.  
Should you be unable to insert the plug fully into the outlet,  
try reversing the plug. Should it still fail to fit, contact your  
electrician.  
2 Operate the TV set only from a power source as indicated on the TV set or refer to the  
operating instructions for this information. If you are not sure of the type of power supply to  
your home, consult your TV set dealer or local power company. For battery operation, refer  
to the operating instructions.  
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords  
and broken plugs. They may result in a shock or fire hazard. Call your service technician for  
replacement.  
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set  
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.  
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or  
laundry tub, in a wet basement, or near swimming pool, etc.  
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded  
so as to provide some protection against voltage surges and built-up static charges.  
Section 810 of the National Electrical Code provides information with respect to proper  
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors, location of antenna discharge unit, connection  
requirements for the grounding electrode.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 An outside antenna system should not be located in the vicinity of overhead power lines  
or other electric light or power circuits, or where it can fall into such power lines or circuits.  
When installing an outside antenna system, extreme care should be taken to keep from  
touching such power lines or circuits as contact with them might be fatal.  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRICAL  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ARTICLE 250, PART H)  
NEC - NATIONAL ELECTRIC CODE  
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during  
operation to be released.  
Therefore:  
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,  
rug, etc.  
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.  
— Never cover the openings with a cloth or other material.  
— Never place the TV set near or over a radiator or heat register.  
9 To avoid personal injury:  
— Do not place a TV set on a sloping shelf unless properly secured.  
— Use only a cart or stand recommended by the TV set manufacturer.  
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.  
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a  
mounting kit approved by the manufacturer.  
Use  
10 Caution children about dropping or pushing objects into the TV set through cabinet  
openings. Some internal parts carry hazardous voltages and contact can result in a fire or  
electrical shock.  
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol  
cleaner.  
12 Never add accessories to a TV set that has not been designed for this purpose. Such  
additions may result in a hazard.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
13 For added protection of the TV set during a lightning storm or when the TV set is to be left  
unattended for an extended period of time, unplug it from the wall outlet and disconnect the  
antenna. This will prevent damage to product due to lightning storms or power line surges.  
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the TV set and cart combination to overturn.  
Service  
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the TV set.  
C. If the TV set has been exposed to rain or water.  
D. If the TV set does not operate normally by following the operating instructions. Adjust  
only those controls that are covered in the operating instructions as improper adjustment  
of other controls may result in damage and will often require extensive work by a  
qualified technician to restore the TV set to normal operation.  
E. If the TV set has been dropped or damaged in any way.  
F. When the TV set exhibits a distinct change in performance — this indicates a need for  
service.  
16 Do not attempt to service this TV set yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service  
personnel.  
17 When replacement parts are required, have the service technician verify in writing that the  
replacement parts he uses have the same safety characteristics as the original parts. Use  
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.  
18 Upon completion of any service or repairs to this TV set, please ask the service technician  
to perform the safety check described in the manufacturer’s service literature.  
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture  
tube implosion. Ask a qualified service technician to dispose of the TV set.  
20 Note to CATV system installer.  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of  
the NEC that provides guidelines for proper grounding and, in particular, specifies that the  
cable ground shall be connected to the grounding system of the building, as close to the  
point of cable entry as practical.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Quick Setup . . . . . . . . . . . . . 7  
Unpacking your TV . . . . . . . . . . . . 7  
TV Models . . . . . . . . . . . . . . . . 8  
TV Remote Control . . . . . . . . . . . 10  
Getting Started . . . . . . . . . . . . . 11  
The Remote Control . . . . . . . . . . 11  
Connecting Your Devices . . . . . . . 12  
Interactive Plug In Menu . . . . . . . . 20  
Programming your remote . . . . . . . 23  
Clock Timers . . . . . . . . . . . 51  
Set Clock . . . . . . . . . . . . . . . 51  
On/Off Timer . . . . . . . . . . . . . 52  
Button Functions . . . . . . . . . 53  
Power . . . . . . . . . . . . . . . . . . 53  
Number Buttons . . . . . . . . . . . . . 53  
Tune . . . . . . . . . . . . . . . . . . 53  
Input . . . . . . . . . . . . . . . . . . . 53  
Channel +/- . . . . . . . . . . . . . . 53  
Volume +/- . . . . . . . . . . . . . . . 53  
Return+/TV . . . . . . . . . . . . . . . 54  
Sound . . . . . . . . . . . . . . . . . . 54  
Muting . . . . . . . . . . . . . . . . . . 54  
Video Status . . . . . . . . . . . . . . . 55  
TheaterPro D6500K . . . . . . . . . . . 55  
Sleep Timer . . . . . . . . . . . . . . . 55  
Display . . . . . . . . . . . . . . . . . 56  
C.C. . . . . . . . . . . . . . . . . . . . 56  
Aspect . . . . . . . . . . . . . . . . . 57  
Aspect Ratios . . . . . . . . . . . . . 57  
Favorite . . . . . . . . . . . . . . . . . . . 59  
ML/MTS . . . . . . . . . . . . . . . . . . . 60  
Menu . . . . . . . . . . . . . . . . . . 60  
OK . . . . . . . . . . . . . . . . . . . 60  
Back . . . . . . . . . . . . . . . . . . . 60  
Sub Channel . . . . . . . . . . . . . 61  
Guide . . . . . . . . . . . . . . . . . 61  
TV/CATV Slide Switch . . . . . . . . . . 62  
VCR/DVD Slide Switch . . . . . . . . . 62  
VCR Buttons . . . . . . . . . . . . . . . 62  
DVD Buttons . . . . . . . . . . . . . . . 62  
Onscreen Menus . . . . . . . . . . 27  
Using the Guide . . . . . . . . . . . . . 27  
Onscreen Menu System . . . . . . . . . 28  
Initial Setup . . . . . . . . . . . . 30  
Noise Muting . . . . . . . . . . . . 30  
Language  
.
.
.
.
.
.
.
.
.
.
.
.
30  
Front Panel Lock . . . . . . . . . . . . 30  
V-Chip . . . . . . . . . . . . . . . . . . 31  
Closed Caption . . . . . . . . . . . . . 38  
Auto Shut Off . . . . . . . . . . . . . . 40  
Software Version . . . . . . . . . . . 40  
Tilt Correction . . . . . . . . . . . . . . . 40  
Tuner Setup . . . . . . . . . . . 41  
Auto Tuner Setup . . . . . . . . . . . 41  
Channel Summary . . . . . . . . . . . 41  
Find Channel . . . . . . . . . . . . . . 43  
Digital Antenna Level . . . . . . . . . . 43  
External Input . . . . . . . . . . . 44  
Digital-In Size . . . . . . . . . . . . . . . 44  
Digital-In1 Audio . . . . . . . . . . . . . 44  
Video Input Label . . . . . . . . . . . 45  
Troubleshooting . . . . . . . . . 63  
OSD Information . . . . . . . . . 64  
Specifications . . . . . . . . . . 65  
Warranty . . . . . . . . . . . . . 66  
Authorized Service Centers . . 67  
Notes . . . . . . . . . . . . . . 68  
Picture Adjust . . . . . . . . . . . 46  
Picture Settings . . . . . . . . . . . . . 46  
Adjust Picture Settings . . . . . . . . . 46  
Color Temperature . . . . . . . . . . . . 46  
Noise Reduction . . . . . . . . . . . . 47  
VSM . . . . . . . . . . . . . . . . . . . 47  
Natural Cinema . . . . . . . . . . . . 47  
Position Adjustment . . . . . . . . . . . 48  
Reset . . . . . . . . . . . . . . . . . . 48  
Sound Adjust . . . . . . . . . . . 49  
Sound Settings . . . . . . . . . . . . . 49  
Adjust Sound Settings . . . . . . . 49  
Optical Out . . . . . . . . . . . . . . 49  
Turn On Volume . . . . . . . . . . . . . 50  
Volume Limit . . . . . . . . . . . . . . . 50  
Reset . . . . . . . . . . . . . . . . . . 50  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new  
television, please check to make sure you have all of the following items. In addition to this  
guide, your television box should include:  
Two AA  
Batteries  
1 Remote Control  
1 Television  
TV CATV VCR DVD  
POWER  
INPUT  
SLEEP  
TIMER DISPLAY C.C.  
THEATER PRO  
1
2
3
6
9
VIDEO STATUS  
4
5
ASPECT  
7
8
0
SUB CH  
TUNE  
RETURN+  
/TV  
FAVORITE ML/MTS SOUND GUIDE  
MUTING  
OK  
CH  
CH  
+
VOL  
VOL  
+
Note: Your television  
and/or remote  
MENU  
BACK  
VCR CHANNEL VCR/DVD  
PREV NEXT  
POWER TV/VCR  
REW  
REC  
PLAY  
FF  
control may differ  
from the examples  
illustrated here.  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
SERVICE  
ONL  
POWER  
Y
POWER  
ON TIMER  
/
RM-C1272G  
TV  
We recommend that before you start using your new television, you read your entire User’s  
Guide so you can learn about your new television’s many great features. If you’re anxious to  
start using your television right away, a quick setup guide follows on the next few pages.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Models  
Before you connect your television to another device, please refer to the proper diagrams for  
your specific TV and remote. These will help assist you in understanding how to connect your  
television to another device, as well as use the remote to set up your television.  
Rear panel diagram  
UNPLUG THE POWER CORD FROM  
AC OUTLET BEFORE REMOVING THE  
REAR COVER  
When the rear cover is removed, follow  
"CAUTION AT DISASSEMBLY" procedure in  
the service manual before plugging the TV's  
power cord into an AC outlet. Failure to  
follow the procedure will result in  
PERMANENT damage to some of the  
television features.  
DÉBRANCHEZ LE CORDON DE LA PRISE DE  
COURANT C.A. AVANT DE RETIRER LE  
COUVERCLE ARRIÈRE.  
Une fois le couvercle arrière déposé suivez la  
procédure ««ATTENTION LORS DU  
DÉMONTAGE»» décrite dans la manuel de  
service avant de brancher le cordon du  
téléviseur dans une prise c.a. L'omission de  
suivre la procédure causera des dommages  
PERMANENTS  
téléviseur.  
à
certaines fonctions du  
75Ω  
(VHF/UHF)  
Manufactured under license  
from Dolby Laboratories.  
"Dolby" and the double-D  
symbol are trademarks of  
Dolby Laboratories.  
1
INPUT-3  
INPUT-2  
INPUT-1  
DIGITAL-IN  
COMPONENT VIDEO  
VIDEO-2 VIDEO-1  
2
S-VIDEO  
S-VIDEO  
OVER  
VIDEO  
L
OVER  
VIDEO  
L
Y
AUDIO OUT  
VIDEO  
OPTICAL OUT  
DIGITAL  
AUDIO  
L
L
AUDIO  
R
Pb  
Pr  
AUDIO  
R
AUDIO  
R
R
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Side panel diagram  
INPUT 4  
S-VIDEO  
MENU  
+
+
OVER  
VIDEO  
OPERATE  
CHANNEL  
L/MONO  
AUDIO  
R
VOLUME  
Front panel diagram  
SERVICE  
ONLY  
POWER  
POWER  
ON TIMER  
/
Illustration of AV-30W777  
Notes:  
• The terminal labeled "SERVICE ONLY", is exclusively used to update the software version.  
• BBE is only for AV-30W777.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Remote Control  
POWER  
INPUT  
TV CATV VCR DVD  
SLEEP  
TIMER  
DISPLAY C.C.  
THEATER PRO  
VIDEO STATUS  
ASPECT  
1
4
2
3
6
9
5
7
8
0
TUNE  
RETURN+  
/TV  
SUB CH  
FAVORITE ML/MTS SOUND GUIDE  
MUTING  
OK  
CH +  
CH –  
VOL  
+
VOL  
MENU  
BACK  
VCR/DVD  
POWER  
VCR CHANNEL  
PREV NEXT  
TV/VCR  
REW  
REC  
PLAY  
FF  
STOP  
PAUSE  
OPEN/CLOSE  
STILL/PAUSE  
RM-C1272G  
TV  
RM-C1272G  
• For information on remote control buttons, see pages 53 - 62.  
• SUB CH and GUIDE buttons are for digital channels. If your TV is connected to an ATSC  
antenna or Digital Cable, you can use these buttons.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
These quick setup pages will provide you, in three easy steps, with the basic information you  
need to begin using your new television right away. If you have questions, or for more detailed  
information on any of these steps, please consult other sections of this manual.  
Step 1 – The Remote Control  
Before you can operate your remote control, you first  
need to install the batteries (included).  
Lift and pull the latch on the back of the remote control  
to open. Insert two batteries (included) carefully noting  
the “+” and “–” markings, placing the “–” end in the unit  
first. Snap the cover back into place.  
When you change the batteries, try to complete the  
task within three minutes. If you take longer than  
three minutes, the remote control codes for your  
VCR, DVD, and/or cable box/satellite receiver may  
have to be reset. See pages 23 - 26.  
Key Feature Buttons  
MUTING  
OK  
The four key feature buttons at the center of the remote  
can be used for basic operation of the television. The top  
and bottom buttons will scan forward and back through the  
available channels. To move rapidly through the channels  
using JVC’s Hyperscan feature, press and hold CH+ or  
CH–. The channels will zip by at a rate of five channels per  
second. The right and left buttons will turn the volume up or  
down. These buttons are also marked with four arrows and  
are used with JVC’s onscreen menu system. To use the  
onscreen menus, press the MENU button.  
CH +  
CH –  
VOL  
+
VOL  
MENU  
BACK  
POWER  
TV CATV  
Basic Operation  
Turn the television on and off by pressing the POWER button at the top right  
corner of the remote. If this is the first time you are turning on the TV, the  
interactive plug-in menu appears.  
• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if  
you need to operate a cable box.  
• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to  
DVD to control a DVD player. Please see pages 23 to 26 for instructions on  
programming your remote control to operate a cable box, VCR or DVD player.  
V VCR DVD  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Step 2 – Connecting Your Devices  
To make these connections, you will use plugs like the ones illustrated below.  
Component Cables  
Coaxial Cables  
Composite Cables  
Audio Cables  
Used to connect an external  
antenna or cable TV system to your  
TV.  
Used to connect audio/video  
devices like VCRs, DVD players,  
stereo amplifiers, game consoles,  
etc.  
S-Video Cable  
Used to make video connections  
with S-Video VCRs, Camcorders  
and DVD players.  
Notes:  
• These connections are examples.  
• After you are finished connecting your devices, plug the power cord into the nearest power  
outlet and turn on the TV.  
• If you follow these diagrams and the television does not work properly, contact your local  
cable operator.  
To connect a DVD player, see VCR Connection. A DVD player is optional  
• If you have a satellite television system, refer to the satellite TV manual.  
No VCR Connection  
Cable or Antenna  
Output  
Coaxial Cable  
75Ω  
(VHF/UHF)  
TV Rear Panel  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
VCR Connection  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 1.  
Diagram #1  
VCR  
R
L
V
Cable or Antenna  
Output  
Cable Cable  
In Out  
IN  
OUT  
Coaxial Cable  
OR  
TV Rear Panel  
75Ω  
(VHF/UHF)  
INPUT-3  
INPUT-2  
INPUT-1  
COMPONENT VIDEO  
VIDEO-2  
VIDEO-1  
SO  
S-VIDEO  
OVER  
L
OVER  
VIDEO  
L
Y
VIDEO  
L
AUDIO  
R
Pb  
P
A
R
IO  
R
DVD Player (Optional)  
AUO UT  
VEO OUT  
PR PB  
Y
R
L
Note:  
• If this connection setup does not work for you, try the connection setup on page 14.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Diagram #2  
VCR  
R
L
V
Cable or Antenna  
Output  
Cable Cable  
In Out  
IN  
OUT  
IN  
OR  
Two-Way Splitter  
OUT OUT  
TV Rear Panel  
INPUT-3  
INPUT-2  
INPUT-1  
Coaxial Cable  
COMPONENT VIDEO  
75Ω  
(VHF/UHF)  
VIDEO-2  
VIDEO-1  
SO  
S-VIDEO  
OVER  
V
L
OVER  
VIDEO  
L
Y
VIDEO  
L
AUDIO  
R
P
P
AU
R
IO  
R
DVD Player (Optional)  
AUO UT  
VEO OUT  
PR PB  
Y
R
L
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a Camcorder  
You may connect a camcorder, game console or other equipment to your television by using  
the side input jacks (Input 4) located on the side of the television. You can also connect  
these using the television’s rear input jacks, using the same instructions.  
INPUT  
4
S-VIDEO  
MENU  
+
+
OVER  
VIDEO  
OPERATE  
CHANNEL  
Camcorder  
- OR -  
L/MONO  
AUDIO  
R
VOLUME  
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the front of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.  
2) Connect a white composite cable from the camcorder LEFT AUDIO OUT, into the  
LEFT AUDIO IN on the front of the TV.  
3) Connect a red composite cable from the camcorder RIGHT AUDIO OUT, into the  
RIGHT AUDIO IN on the front of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
LEFT AUDIO IN.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an External Amplifier  
TV Rear Panel  
Speaker  
Speaker  
AUDIO OUT  
Amplifier  
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to  
the LEFT AUDIO INPUT on the amplifier.  
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to  
the RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
Connecting to an amplifier using your optical output  
You can connect an amplifier that has an optical digital input terminal by using an optical digital  
cable from the optical output. This only effects digital channels.  
TV Rear Panel  
Amplifier  
OPTICAL OUT  
Digital  
Audio  
1) Connect the optical cable from the back of the TV to the back of the amplifier.  
Notes:  
• This terminal can only output digital audio.  
• In order to use the optical output connection, select "PCM" or "DOLBY DIGITAL" on "Optical  
Out" in Sound Adjust. See page 49.  
You can not output audio using the OPTICAL OUTPUT when you have digital sound from an  
HDMI device connected to the HDMI 1 or HDMI 2 connection on the back of your TV. (See  
page 18).  
• Refer to your owners manual on using your amplifier.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a Digital TV Receiver  
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in  
their digital form.  
TV Rear Panel  
DTV device  
1
Audio Out Digital Out  
INPUT-3  
INPUT-2  
INPUT-1  
L
R
DIGITAL-IN  
2
S-VIDEO  
S-VIDEO  
OVER  
VIDEO  
L
OVER  
VIDEO  
L
VIDEO  
AUDIO  
AUDIO  
R
AUDIO  
R
HDMI to DVI Cable  
After the connections have been made,  
tighten the screw to secure the cables.  
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to  
the DIGITAL-IN 1 on the back of your television.  
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO INPUT  
"INPUT-3" on the back of your television.  
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO INPUT  
"INPUT-3" on the back of your television.  
• The digital-in terminal is not compatible with the picture signal of a personal computer.  
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television  
with a DTV decoder.  
Notes:  
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance  
may be slightly shifted. Access the “Digital-In Size” in the External Input menu to adjust it.  
(Refer to page 44.)  
• When you do the above connection, set "Digital-In1 Audio" in the External Input menu to  
ANALOG. See "Digital-In1 Audio", page 44.  
• The Analog Audio input can only be used with the HDMI 1 input.  
• When setting the “DIGITAL AUDIO – ANALOG / DIGITAL” menu setting on the TV, please note  
that this setting only effects the HDMI 1 jack and that if you use a DVI to HDMI adapter this  
connection must be made to the HDMI 1 along with analog audio cables.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an HDMI Compatible Device  
By connecting an HDMI compatible device, high definition pictures can be displayed on your  
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI  
compatible devices.  
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all  
digital audio/video interface. HDMI provides and interface between any audio/video source,  
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a  
digital television (DTV).  
HDMI Compatible Device  
TV Rear Panel  
Digital Out  
1
DIGITAL-IN  
2
HDMI Cable  
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to  
the DIGITAL-IN on the back of your television.  
Notes:  
• When you do the above connection, set "Digital-In1 Audio" in the External Input menu to  
DIGITAL. See "Digital-In1 Audio", page 44.  
• Some decoders may not respond depending on the equipment that you have connected  
when it is connected to the HDMI.  
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to  
480p/60Hz), the screen may turn green and there may be some distortion for a short time  
until the signal becomes stable.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an AV Receiver using your television's  
V1 Smart Input  
By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture  
sources from many different devices, without having to change or use the other input  
connections on your TV. This allows you to free up the other input connections so you can  
connect more devices to your television.  
TV Rear Panel  
INPUT-3  
INPUT-2  
INPUT-1  
AV Receiver  
COMPONENT VIDEO  
VIDEO-2 VIDEO-1  
S-VIDEO  
S-VIDEO  
MONITOR  
OUT  
Y
P
P
OVER  
VIDEO  
L
OVER  
VID
Y
B
R
VIDEO  
L
AUDIO  
R
b  
r  
MONITOR OUT  
AUDIO  
R
AUDIO  
R
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1  
on the back of your television.  
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO  
INPUT-1 on the back of your television.  
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y  
VIDEO INPUT-1 on the back of your television.  
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb  
VIDEO INPUT-1 on the back of your television.  
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr  
VIDEO INPUT-1 on the back of your television.  
Note:  
• Please refer to your AV Receiver instruction manual for more information on connecting your  
speakers and other devices like a DVD player.  
• Use your AV Receiver's remote to switch to the different devices you have connected.  
• Some AV Receivers may not respond when the V1 Smart Input function is turned on, see  
page 49.  
• If you have video connections for each input device connected to your AV Receiver, you  
should not connect them using both S-Video and Composite connection at the same time  
when you are using V1 Input as the V1 Smart Input. In this case we recommend using the  
S-Video connection.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Step 3 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “Auto” or “Manual” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Note:  
• If you press the MENU button while setting up the interactive plug-in menu, it will skip over it.  
Language  
After the “JVC Interactive Plug-in Menu” has been displayed, the TV automatically switches  
to the "Language" settings. You can choose to view your onscreen menus in three languages:  
English, French or Spanish.  
Language/Langue/Idioma  
®  
To choose a language:  
(English, Français or Español.)  
English  
To "Set"  
Press the OK button  
Set  
Once you press OK, you will move to the  
"Set Clock" Plug-In Menu automatically.  
OK  
MENU  
Select  
Operate  
Exit  
(To be continued...)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Auto Clock Set  
Before you use any of your TV’s timer functions, you must first set the clock. You may  
precisely set your clock using the XDS time signal broadcast by most public analog  
broadcasting stations. If you do not have this in your area, you will have to set the clock  
manually. See manual clock set below. To set the clock using the XDS signal:  
Set Clock  
®  
To choose "Auto"  
To "Time Zone"  
Mode  
Auto  
: -- --  
Time  
--  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
Time Zone  
D.S.T.  
Atlantic  
On  
Set  
®  
To move to "D.S.T." (Daylight Savings Time)  
To turn "On or Off"  
To "set"  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the OK button  
Once you press OK, you will move to  
the "Auto Tuner Setup" Plug-In Menu  
automatically.  
Notes:  
• D.S.T. can be used when it is set to "On" in the "Set Clock" menu.  
• Only when the "Mode" is set to "Auto", the Daylight Savings Time feature automatically  
adjusts your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00  
am on the first Sunday in April. The clock will move back one hour at 2:00 am on the last  
Sunday in October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
Manual Clock Set  
To set your clock manually (without using the XDS signal), choose "Manual". If you choose  
"Auto", see auto clock set above.  
®  
To choose "Manual"  
To "Time"  
Set Clock  
Mode  
Manual  
®  
®  
To set the hour  
To minute  
To set the minute  
To "Time Zone"  
Time  
10  
:
30 AM  
Time Zone  
D.S.T.  
Atlantic  
On  
Set  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
®  
To move to "D.S.T." (Daylight Savings Time)  
To turn "On or Off"  
To "Set"  
Press the OK button  
Once you press OK, you will move to  
the "Auto Tuner Setup" Plug-In Menu  
automatically.  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
(To be continued...)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.  
Auto Tuner Setup  
®  
To choose "Cable or "Air" (or "Skip" when  
you skip "Auto Tuner Setup")  
Tuner Mode  
Scan Mode  
Air  
Auto  
π†  
®  
To Scan Mode  
To choose Auto, STD, HRC or IRC  
Start  
To "Start"  
Press the OK button  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Now programming ...  
20  
When the setup is finished, "Thank you ! Setup is now complete." is displayed. Your quick  
setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• If you want to cancel the Auto Tuner Setup, press the MENU button.  
• Noise muting will not work during Auto Tuner Setup.  
• If you choose "Skip", it finished without doing the Auto Tuner Setup.  
Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending  
on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is  
normal.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Programming your remote control  
You can program your remote to operate your cable box, satellite receiver, VCR or DVD  
player by using the instructions and codes listed below. If the equipment does not respond to  
any of the codes listed below or to the code search function, use the remote control supplied  
by the manufacturer.  
Cable Box or Satellite Codes  
The remote control is programmed with cable box and satellite codes for power on/off,  
channel up/down, and 10 key operation.  
1) Find the cable box or satellite brand from the list of codes shown below.  
2) Slide the 2-way selector switch to “CATV”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.  
• If your cable or satellite box does not respond to the first code, try the others listed. If it does  
not respond to any code, try the search codes function, on page 26.  
Cable Box  
ABC  
CODES  
024  
Cable Box  
Puser  
CODES  
032  
Digital  
Satellite  
Systems  
CODES  
Archer  
032, 025  
051, 032  
022, 051  
058, 059  
024, 032, 025  
029  
RCA  
061, 070  
032  
Echostar  
100, 113, 114,  
115  
Cableview  
Citizen  
Realistic  
Regal  
058, 064, 040,  
041, 042, 045,  
068  
Express VU  
G.E.  
100, 113  
Curtis  
106  
Diamond  
Eagle  
Regency  
034  
G.I.  
108  
Rembrandt  
037, 032, 051,  
038  
Gradiente  
Hitachi  
112  
Eastern  
GC Brand  
Gemini  
034  
032, 051  
022, 043  
104, 111  
Samsung  
051  
HNS (Hughes)  
Scientific Atlanta 057, 058, 059  
104  
General Instrument 065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
SLMark  
051, 047  
051, 056  
032, 051  
Panasonic  
Philips  
105  
Sprucer  
Stargate  
102, 103  
023  
Primestar  
108  
Hamlin  
040, 041, 042,  
045, 058, 064  
049, 024  
Telecaption  
Teleview  
Texscan  
Tocom  
067  
Proscan  
RCA  
106, 109, 110  
106, 109, 110  
Hitachi  
Jerrold  
047, 051  
044  
065, 024, 025,  
026, 027, 020,  
021, 022, 057,  
023  
Sony  
107  
035, 036, 066  
050  
Star Choice  
104, 108  
Toshiba  
Unika  
Toshiba  
Uniden  
101  
Macom  
049, 050, 051,  
054  
102, 103  
032, 025  
Universal  
Videoway  
Viewstar  
Zenith  
022, 032  
052  
Magnavox  
033  
030  
Memorex  
Movietime  
029, 030  
063, 046  
046  
032, 051  
039, 037, 048  
Oak  
Panasonic  
055, 056, 060,  
071, 073  
Zenith/Drake  
Satellite  
Paragon  
Philips  
063  
028, 029, 030,  
052, 053, 031,  
069  
Pioneer  
Pulsar  
047, 062  
051, 032  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
VCR Codes  
The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,  
rewind, pause, record, channel up/down operation.  
1) Find the VCR brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the VCR.  
• If your VCR does not respond to the first code, try the others listed. If it does not respond to  
any of the codes, try the search codes function on page 26.  
• After you program your remote, some VCR buttons may not work properly. If so, use the  
VCR’s remote.  
To record, hold down the REC button on the remote and press PLAY.  
VCRs  
CODES  
035  
027, 032, 095  
VCRs  
CODES  
VCRs  
CODES  
Admiral  
Aiwa  
Marantz  
Marta  
003, 004, 005  
064  
Samsung  
037, 060, 062,  
033, 089  
Samtron  
Sansui  
089  
Akai  
029, 072, 073, Memorex  
074  
024, 067  
003, 026, 020,  
052  
038, 040, 047,  
048, 041, 042  
MGA  
Audio Dynamic 003, 005  
Sanyo  
Scott  
063, 067, 091,  
071  
Bell & Howell  
Broksonic  
Canon  
063, 071  
020, 026, 094  
023, 025  
043  
Minolta  
058, 045, 093  
Mitsubishi  
038, 040, 047,  
048, 041, 042,  
078, 090  
059, 060, 062,  
067, 038, 040,  
047, 048, 026,  
020  
CCE  
Multitech  
NEC  
047, 027, 062  
Citizen  
064  
003, 004, 005,  
000  
Sears  
063, 064, 065,  
066, 058, 000,  
001  
Craig  
063, 029, 064  
Curtis Mathes  
045, 024, 027,  
093  
Olympic  
024, 023  
Shintom  
Sharp  
075  
Optimus  
028, 021, 035,  
064  
Daewoo  
043, 059, 024,  
092  
035, 036, 080,  
088  
026, 020  
Orion  
DBX  
003, 004, 005  
Panasonic  
023, 024, 021,  
022  
Signature 2000 027, 035  
Dimensia  
Emerson  
045, 093  
Singer  
Sony  
075  
043, 026, 077,  
061, 025, 042,  
020, 076  
Penney  
024, 058, 045,  
063, 003, 004,  
005, 093  
028, 029, 030,  
053, 054, 055  
SV 2000  
Sylvania  
027  
Fisher  
Funai  
063, 066, 067,  
065, 071, 091  
Pentax  
Philco  
058, 005, 045,  
093  
031, 023, 024,  
027  
027, 026, 020,  
000  
031, 024, 027,  
023, 026, 020,  
043  
Symphonic  
Tashiro  
Tatung  
027, 081  
064  
033, 045, 024  
G.E.  
Philips  
031, 023, 024,  
086  
003, 004, 005  
Go Video  
037, 051, 049,  
050, 089  
Teac  
003, 004, 027,  
005  
Pioneer  
Proscan  
023  
Goldstar  
064  
045, 058, 023,  
024, 031, 046,  
059, 060, 033,  
087, 093  
Technics  
021, 022, 023,  
024  
Gradiente  
083, 084, 081,  
000, 001  
Teknika  
Toshiba  
024, 027, 070  
059, 046, 079  
Hitachi  
023, 045, 058,  
027, 081, 093  
Quasar  
021, 022, 023,  
024  
Vector Research 005  
Instant Replay 024, 023  
Wards  
Yamaha  
Zenith  
035, 036, 067,  
044, 064  
Radio Shack  
033, 024, 063,  
036, 067, 040,  
027  
Jensen  
JVC  
003  
000, 001, 002,  
003, 004, 005  
063, 003, 004,  
005  
033, 045, 058,  
023, 024, 031,  
046, 059, 060,  
083, 084, 085,  
087, 093  
RCA  
Kenwood  
LXI  
003, 004, 064,  
005  
044, 082, 064,  
094  
027, 064, 058,  
065, 066, 063,  
067  
Realistic  
024, 063, 036,  
067, 040, 027  
Magnavox  
031, 023, 024,  
086  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
DVD Codes  
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,  
rewind, previous/next chapter, tray open/close, and still/pause operation.  
1) Find the DVD player brand from the list of codes shown below.  
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.  
3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10  
key pad.  
4) Release the DISPLAY button, and confirm the operation of the DVD player.  
• If your DVD player does not respond to the first code, try the others listed. If it does not  
respond to any of the codes, try the search codes function on page 26.  
• After you program your remote, some DVD buttons may not work properly. If so, use the  
DVD player’s remote.  
DVD Player  
Aiwa  
CODES  
043  
DVD Player  
RCA  
CODES  
021, 026  
Apex  
040  
Sampo  
Samsung  
Sharp  
034  
030  
028  
038  
Denon  
Hitachi  
JVC  
020, 037  
030, 031  
000  
Silvania  
Sony  
Kenwood  
Konka  
035  
024, 045, 046,  
047  
039  
Mitsubishi  
Onkyo  
Oritron  
Panasonic  
Philips  
Pioneer  
Raite  
025  
Technics  
Toshiba  
Vialta  
020  
041  
023  
044  
050  
020  
Wave  
042  
023, 036  
022  
Yamaha  
Zenith  
020  
027, 032  
033  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Search Codes  
Cable/Satellite Search Codes Function  
1) Slide the first 2-Way Mode Selector switch to CATV.  
2) Press the POWER and RETURN+/TV buttons. Hold for at least three seconds and release.  
3) Press the POWER button on the remote, and see if the cable or satellite box responds.  
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use  
the remote control that came with your equipment.  
5) Press RETURN+/TV to exit.  
VCR/DVD Search Codes Function  
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or  
“DVD”.  
2) Press the VCR or DVD POWER and RETURN+/TV buttons. Hold for at least three seconds  
and release.  
3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.  
4) If there was a response, press RETURN+/TV. The codes are now set. If there was no  
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for  
the DVD player), and there is no response, use the remote control that came with your  
equipment.  
5) Press RETURN+/TV to exit.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–  
buttons let you:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
• Scan through TV channels (when not in a menu screen)  
® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right  
to:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
• Turn the volume up or down (when not in a menu screen)  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping arrow” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The following  
(left) main menu will appear. The item that appears in green is the one currently selected. If  
you use the MENU button on the TV’s front panel instead of the remote, Front Menu screen  
showing "Input", "Video Status", "Aspect" and "Menu" will appear (following right screen). The  
“Interactive Plug-in Menu” will appear the first time the TV is plugged in.  
Menu  
Front Menu  
TV  
Input  
Initial Setup  
Standard  
Panorama  
Video Status  
Aspect  
+
Tuner Setup  
Menu  
External Input  
Picture Adjust  
Sound Adjust  
Exit  
MENU  
Select  
Operate  
Clock/Timers  
Interactive Plug-in Menu  
Note:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. All menus are navigated from  
the Main Menu at first. Detailed explanations on using each menu follow later in this guide. For  
information about the interactive plug-in Menu, see pages 20 - 22.  
1. To open the onscreen menu system, press the MENU button on the remote control. The  
main menu will appear  
Menu  
Initial Setup  
+
Tuner Setup  
External Input  
Picture Adjust  
Sound Adjust  
Clock/Timers  
Interactive Plug-in Menu  
2. To select a menu from the main menu, use the πarrows and enter by using the ®  
arrows or OK button.  
The selected feature and option on a menu screen are highlighted in a different color.  
To move to a different feature, use the πarrows to move up and down the list.  
3. There are two methods to select an option in a menu, after selecting a menu using the π†  
arrows.  
1) Use the ® arrows to select an option from the highlighted feature. (In this guide, we  
discuss this method).  
+
Auto Tuner Setup  
2) Press the OK button. The right onscreen will  
appear. Use the πarrows to select an option  
from the box and press the OK button.  
Tuner Mode  
Scan Mode  
Cable  
Auto  
Auto  
STD  
HRC  
IRC  
• To go back to the previous screen, press the BACK  
button.  
Sta
OK  
BACK  
MENU  
4. Pressing MENU on the remote control will close the  
onscreen menu system and return you to normal  
television viewing.  
Select  
Operate  
Back  
Exit  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
• If you do not press any buttons for a few seconds, the onscreen menu will automatically  
shut off.  
• Button names in this guide are shown in SMALL CAPITAL LETTERS.  
• Menus may appear in different sizes onscreen depending on the aspect ratio selected.  
• Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Initial Setup  
1/2  
Initial Setup  
2/2  
From the  
Noise Muting  
Language  
On  
English  
Off  
Auto Shut Off  
Software Version  
Tilt Correction  
On  
Main Menu...  
Front Panel Lock  
V-Chip  
Set Lock Code  
Closed Caption  
BACK  
MENU  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Select  
Operate  
Back  
Exit  
Initial Setup 1/2  
Initial Setup 2/2  
+
Tuner Setup  
Auto Tuner Setup  
Channel Summary  
Find Channel  
Digital Antenna Level  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Tuner Setup  
External Input  
Digital-In Size  
Auto  
Digital  
Digital-In1 Audio  
Video Input Label  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
External Input  
Picture Adjust  
1/2  
Standard  
Picture Adjust  
2/2  
Video Status  
Video Status  
Standard  
Off  
Tint  
0
0
0
0
0
Noise Reduction  
VSM  
Color  
On  
On  
Picture  
Natural Cinema  
Position Adjustment  
Reset  
Bright  
Detail  
Color Temperature  
Low  
BACK  
MENU  
BACK  
MENU  
OK  
OK  
Select  
Operate  
Back  
Exit  
Select  
Operate  
Back  
Exit  
Picture Adjust 1/2  
Picture Adjust 2/2  
Sound Adjust  
Bass  
0
0
0
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
20  
Reset  
MENU  
BACK  
Select  
Operate  
Back  
Exit  
Sound Adjust  
Clock/Timers  
Set Clock  
On / Off Timer  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Clock/Timers  
Notes:  
• The "Digital-In Size" menu can only be displayed when a 480p picture signal is input to the  
digital-in terminal and the picture is being displayed on the screen.  
• For the Interactive Plug-In Menu, see page 20.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Noise Muting  
This feature inserts a blank black screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Initial Setup  
1/2  
Press the MENU button  
Noise Muting  
Language  
On  
English  
Off  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Noise Muting"  
To turn "On" or "Off"  
Press the MENU button when finished  
Front Panel Lock  
V-Chip  
Set Lock Code  
Closed Caption  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Note:  
• Noise muting will not work when you operate channel summary.  
Language  
The language function is described on page 20 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Initial Setup  
1/2  
Press the MENU button  
Noise Muting  
Language  
On  
English  
Off  
π†  
®  
π†  
To "Initial Setup"  
To enter  
To "Language"  
Front Panel Lock  
V-Chip  
Set Lock Code  
Closed Caption  
®  
To choose a language: English, French or  
Spanish  
Press the MENU button when finished  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Front Panel Lock  
This allows you to lock the keys on the front of the TV, so that a child may not accidentally  
change your viewing preferences.  
Press the MENU button  
Initial Setup  
1/2  
Noise Muting  
Language  
On  
English  
Off  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Front Panel Lock"  
To turn "On" or "Off"  
Press the MENU button when finished  
Front Panel Lock  
V-Chip  
Set Lock Code  
Closed Caption  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
You can turn off this feature in the following ways:  
• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your  
remote control.  
• Use the remote control.  
• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD  
for "Front Panel Lock" will appear.  
Note:  
To turn ON/OFF the TV, press the POWER button for more than 3 seconds. This feature will  
remain ON.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set  
up V-CHIP ratings limits, these programs will not be blocked. See page 36 for information on  
how to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings (for programming broadcast from the United States), Canadian  
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use  
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting  
each of the three V-Chip formats appear in the next six pages along with descriptions of the  
rating categories.  
To access the rating categories:  
Initial Setup > V-Chip  
Press the MENU button  
V-Chip  
Off  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will  
appear)  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Unrated  
View  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Enter the password by using the 10 button  
keypad  
The V-Chip main screen will appear when the password is correct.  
®  
To turn V-Chip "On" or "Off" (V-Chip must be turned "On" for rating settings to  
operate)  
π†  
To move to V-Chip menu (see following pages for descriptions of each item)  
Notes:  
• If you input the wrong password, go back to the initial Setup Menu.  
To set the password, see "Set Lock Code", page 37.  
• "Advanced V-Chip Rating" and "Advanced Canadian Rating" menus may be displayed  
sometimes between "Set Canadian Ratings French" and "Unrated". These menus are  
reserved for future use, as of February 2006.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be able  
to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or no  
violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
Initial Setup > V-Chip  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will  
appear)  
V-Chip  
Off  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Unrated  
View  
Enter the password by using the 10 button  
keypad  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
The V-Chip main screen will appear  
®  
π†  
®  
To turn V-Chip "On" or "Off"  
To move to "Set US TV Ratings"  
To operate  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the πor ® to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the  
icon appears instead of a “—”.  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
Set US TV Ratings  
π® To the TV 14 Column  
TV  
MA  
TV  
14  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
Press the OK button to lock  
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Press the MENU button when finished  
V/FV  
S
L
D
Note:  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
• If you want to change the setup, move the cursor to  
the top column and change the lock icon to “—” by  
pressing OK again. You may then select individual  
categories to block.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur producers  
who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating may  
include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will appear)  
Enter the password by using the 10 button keypad  
The V-Chip main screen will appear  
To turn V-Chip "On" or "Off"  
®  
π†  
®  
To "Set Movie Ratings"  
To enter movies menu  
For example:  
To block viewing of X and NC-17 rated from shows:  
Set US Movie Ratings  
®  
®  
To the X Column  
NC  
PG  
13  
X
R
_
PG  
_
G
_
NR  
_
Press the OK button to lock  
To the NC-17 Column  
17  
_
_
Press the OK button to lock  
Press the MENU button to finish  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and  
early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will appear)  
Enter the password by using the 10 button keypad  
The V-Chip main screen will appear  
To turn V-Chip "On" or "Off"  
®  
π†  
®  
Set Canadian Ratings English  
To "Set Canadian Ratings English"  
To enter ratings menu  
18+  
_
14+  
_
PG  
_
G
_
C8+  
_
C
_
For example:  
To block viewing of programming rated 14+ and 18+:  
®  
To the 18+ Column  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the OK button to lock  
To the 14+ Column  
®  
Press the OK button to lock  
Press the MENU button to finish  
Note:  
• For instructions on “Set Canadian Ratings Fre (in French)”, please see page 35 in the  
French side of this user’s guide.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to "Block".  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
Initial Setup > V-Chip  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
V-Chip  
Off  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Unrated  
To operate (Password input screen will appear)  
View  
Enter the password by using the 10 button  
keypad  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
The V-Chip main screen will appear  
®  
π†  
®  
To turn V-Chip "On" or "Off"  
To "Unrated"  
To "View" or "Block"  
Press MENU when done  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-  
set with a lock code of “0000”. You may change the code to any four-digit number you wish. To  
change the lock code, follow the steps below.  
Press the MENU button  
Initial Setup > Set Lock Code  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Set Lock Code"  
To operate (Password input screen will appear)  
Lock Code  
0
1
2
3
Set  
Clear  
Enter the password by using the 10 button  
keypad  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
The Set Lock Code screen will appear  
To set the password, use the 10 button keypad  
Press the OK button to finish (your lock code is now set)  
When a viewer attempts to watch a blocked channel,  
this message appears:  
This programming exceeds  
your rating limits.  
Please enter lock code  
The channel will remain blocked until the correct lock  
code is entered (see above for information on setting  
your lock code).  
by 10 key pad to unlock it.  
No. - - - -  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
This channel is locked  
Lock Code using the 10 key pad.  
by channel guard.  
Please enter lock code  
by 10 key pad to unlock it.  
No. - - - -  
If the wrong code is entered, the message "invalid lock  
code !” will flash on the screen.  
The channel cannot be accessed until the correct code  
is entered.  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”, page 37.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below.  
Auto Setting  
Press the MENU button  
Initial Setup > Closed Caption  
Preview  
π†  
®  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Closed Caption"  
To enter  
To "Type"  
To select Auto, Advanced or Basic  
Closed Caption sample  
Type  
Auto  
Text1  
1
Analog Service  
Digital Service  
Appearance  
Reset  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Auto: Shows closed caption a priority for  
digital channels over analog channels. It is set automatically.  
Advanced: Shows only the digital closed caption.  
Basic: Shows only the analog closed caption.  
π†  
®  
π†  
®  
π†  
®  
®  
To "Analog Service"  
To select a caption (CC1 to CC4) or text channel (Text1 to Text4)  
To "Digital Service"  
To select 1, 2, 3, 4, 5 or 6  
To Appearance  
To enter  
To select "Auto" ("Manual", see page 39)  
Press the MENU button when finished  
Notes:  
• If you want to reset your settings to the default settings, select "Reset".  
• If you select "Advanced" for Type, you cannot select "Analog Service".  
• If you select "Basic" for Type, you cannot select "Digital Service" and "Appearance".  
• "Type", "Digital Service" and "Appearance" are for digital broadcasting. It has no  
effect for analog broadcasting.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Manual Setting  
®  
To select "Manual" for Appearance Mode  
Closed Caption > Appearance  
Preview  
1/2  
π†  
To "Font Size", "Font Style", "Text/Edge  
Opacity", "Background Opacity", "Text Color",  
"Edge Color" or "Backgrond Color".  
Closed Caption sample  
Appearance Mode  
Font Size  
Manual  
Standard  
Auto  
Font Style  
Text / Edge Opacity  
Background Opacity  
Solid  
Solid  
®  
To select the setting you like  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Font Size: Auto, Standard, Large or Small  
Font Style: Auto, SerifMono, Serif, SanSerifMono,  
SanSerif, Casual, Cursive or SmallCapital  
Closed Caption > Appearance  
Preview  
2/2  
Text/Edge Opacity, Background Opacity: Auto,  
Closed Caption sample  
Transparent, Translucent, Solid, Flashing.  
Text Color  
White  
White  
Black  
Edge Color  
Text Color, Edge Color, Background Color: Auto,  
White, Black, Red, Green, Blue, Yellow, Magenta, or  
Cyan  
Background Color  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the MENU button when finished  
All fonts used for digital closed  
caption and digital menus are  
licensed from Monotype Imaging  
Inc.  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel T1. The other  
channels are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 56.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on.  
Press the MENU button  
Initial Setup  
2/2  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Auto Shut Off"  
To turn "On" or "Off"  
Auto Shut Off  
Software Version  
Tilt Correction  
On  
Press the MENU button when finished  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
• If the channel that you have on does not receive a  
signal for more than one minute, the blinking text “No  
Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the  
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.  
Software Version  
You can confirm the Software Version.  
Press the MENU button  
Initial Setup  
2/2  
π†  
®  
π†  
®  
®  
To "Initial Setup"  
To enter  
To "Software Version"  
To enter  
Select close when you are finished confirming  
your software version  
Auto Shut Off  
Software Version  
Tilt Correction  
On  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the MENU button when finished  
Tilt Correction  
This adjusts the pictures so that it looks even on the screen and not lopsided.  
Press the MENU button  
Initial Setup  
2/2  
π†  
®  
π†  
®  
®  
To "Initial Setup"  
To enter  
To "Tilt Correction"  
To enter  
Auto Shut Off  
Software Version  
Tilt Correction  
On  
To adjust Tilt Correction  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the MENU button when finished  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
+
Press the MENU button  
Tuner Setup > Auto Tuner Setup  
Tuner Mode  
Scan Mode  
Cable  
Auto  
π†  
®  
π†  
®  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Auto Tuner Setup"  
To enter  
To choose "Cable" or "Air"  
To "Scan Mode"  
To choose "Auto", "STD", "HRC" or "IRC"  
To "Start"  
Start  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the OK button (Programming will take serveral minutes)  
The auto tuner is finished when the message "Programming Over !" appears onscreen.  
Press the MENU button when finished  
Notes:  
• When the Tuner Mode is set to "Cable", it is possible to select "Scan Mode"  
• If no channels were found using Auto Tuner Setup, check your antenna cable and the  
settings for Tuner Mode/Scan Mode.  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV.  
Regarding analog channels, you can add or delete channels from the line-up or prevent any  
unauthorized viewers from watching any or all 191 channels. Regarding digital channels, the  
only channels that will appear are the ones that are broadcasting.  
Press the MENU button  
π†  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
+
Tuner Setup > Channel Summary  
Ch No.  
001  
Scan  
Station  
FOX  
002  
003  
004  
005  
006  
ABC  
CNN  
NBC  
BOX  
NHK  
The Channel summary screen will now be displayed with  
the channels set to scan marked with an “”. Regarding  
analog channels, you can delete channels from the scan  
by removing the “”. If any channels were missed during  
auto tuner setup and you wish to add them, you may by  
placing an “” next to the channel number.  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
• Digital channels can not be added to the channel summary if the auto tuner setup did not  
find them.  
π® To the "Scan" column  
Press the OK button to include or delete from scan  
Press the MENU button when finished  
Note:  
• The number of a digital channel may change, depending on the time of some broadcastings.  
If this channel existed and now had disappeared, the lock channel or scanned channel by the  
channel summary for that channel will be cancelled.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
How to set the channel station.  
Press the MENU button  
+
Tuner Setup > Channel Summary > Station  
π†  
®  
π†  
®  
π†  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
A
B
C
Channel 10  
Set  
Reset  
To "Station"  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the OK button to enter  
®  
π†  
To select the character you want  
To move to the next space  
...continue to follow these directions for all seven spaces  
To "Set"  
Press the OK button  
Your characters are now set  
Press the MENU button when finished  
If you want to reset the characters you set:  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
To "Station"  
Press the OK button to enter  
To select "Reset"  
π†  
Press the OK button to finish  
Your characters are now reset  
Notes:  
You can use characters for: Alphabet, numbers, marks and spaces.  
• It is possible to set the maximum of 500 channel labels.  
• If you try to set more than the 500 maximum, the message "Memory Overflow" will appear.  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
π® To the Lock Column (  
)
Press the OK button to lock or unlock that channel  
Press the MENU button when finished  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
Find Channel  
Add a channel that does not exist in the channel map.  
+
Press the MENU button  
Tuner Setup  
Auto Tuner Setup  
Channel Summary  
Find Channel  
π†  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Find Channel"  
To enter  
Find Channel  
Digital Antenna Level  
Channel Num.  
Add  
123_  
Cancel  
Add a channel using 0 to 9  
0
9
OK  
BACK  
MENU  
.
.
.
Select  
Operate  
Back  
Exit  
To "Add"  
Press the OK button to finish  
Digital Antenna Level  
Confirms the present antenna level.  
Antenna Level  
Press the MENU button  
80  
π†  
To "Tuner Setup"  
To enter  
BACK  
MENU  
®  
Back  
Exit  
π†  
To "Digital Antenna Level"  
To enter  
®  
Note:  
• If you are watching an analog channel, antenna level will not appear.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Input  
Digital-In Size  
The DIGITAL-IN option can only be displayed in the External Input menu when an HDMI480p  
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when  
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of  
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the  
position can be adjusted by selecting either Auto, Size1 or Size2.  
Press the MENU button  
External Input  
Digital-In Size  
Auto  
π†  
®  
π†  
®  
π†  
To "External Input"  
To enter  
To "Digital-In Size"  
To enter  
Digital-In1 Audio  
Video Input Label  
Digital  
To select "Auto", "Size1" or "Size2"  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the MENU button to finish  
Notes:  
• The Digital-In Size menu can only be displayed when a HDMI or DVI 480p picture signal is  
input to the Digital-In terminal and the picture is being displayed on the screen.  
You can select "Auto" only when the signal is 480p for HDMI. When you select "Auto", the  
televison will select "Size1" or "Size2" automatically.  
Digital-In1 Audio  
This feature is used if you have a DTV or HDMI compatible component connected to your TV.  
Press the MENU button  
External Input  
π†  
®  
π†  
®  
To "External Input"  
To enter  
To "Digital-In1 Audio"  
To select "Analog", "Digital" or "Auto"  
Digital-In Size  
Auto  
Digital-In1 Audio  
Video Input Label  
Digital  
Press the Menu button when nished  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Notes:  
• If your DTV or HDMI component is capable of digital  
audio and video, choose "Digital". If your DTV or HDMI  
component is capable of analog audio and digital video, choose "Analog".  
• Refer to your DTV or HDMI component’s instruction manual for more information.  
• When you select "Auto", the television will select "Analog" or "Digital" automatically, depending  
on the audio input from the HDMI.  
• When you select "Digital", select PCM on Optical Out in Sound Adjust menu. See page 49.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Input  
Video Input Label  
This function is used to label video input connections for the onscreen displays.  
Press the MENU button  
External Input  
π†  
®  
π†  
®  
π†  
®  
To "External Input"  
To enter  
Digital-In Size  
Auto  
Digital-In1 Audio  
Video Input Label  
Digital  
To "Video Input Label"  
To operate  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
To select the desired video input  
To select the desired preset input label (see  
chart below)  
External Input > Video Input Label  
To "Set"  
Video-1  
VCR  
Video-2  
DVD  
SAT  
Press the OK button to save  
Press the MENU button when finished  
Video-3  
Video-4  
GAME  
D-VHS  
PVR  
Digital-In1  
Digital-In2  
Set  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Preset  
Labels  
Select when...  
VCR  
DVD  
PVR  
You have a VCR connected to the video input  
You have a DVD connected to the video input  
You have a Personal Video recorder connected to the video input  
D-VHS You have a Digital VCR connected to the video input  
STB  
SAT  
AMP  
You have a Set-top Box connected to the video input  
You have a Satellite Receiver connected to the video input  
You have an Amplifier connected to the video input  
GAME You have a Video Game connected to the video input  
CAM  
DISC  
You have a Video Camera connected to the video input  
You have a Video Disc player connected to the video input  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
Tint  
Tint allows you to adjust the levels of red and green in your TV picture.  
Color  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
Picture  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
Bright  
You can adjust the overall brightness of the TV picture with the Bright control.  
Detail  
The Detail feature adjusts the level of fine detail displayed in the picture.  
Adjust the Picture Settings  
Press the MENU button  
Picture Adjust  
1/2  
Standard  
Video Status  
π†  
®  
π†  
®  
To "Picture Adjust"  
To enter  
To "Tint", "Color", "Picture", "Bright" or "Detail"  
To enter  
Tint  
0
0
0
0
0
Color  
Picture  
Bright  
Detail  
Color Temperature  
Low  
Tint  
0
BACK  
MENU  
OK  
Select  
Operate  
Back  
Exit  
®  
π†  
To adjust the setting  
To move to the next setting  
Press the MENU button when finished  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
Color Temp.  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Color Temperature"  
To enter  
Low  
High  
To set "Low" or "High"  
Press the MENU button when finished  
Note:  
• If you are receiving a 1080i or 720p digital channel in it's original format, you can adjust the  
Picture Settings and Color Temperature independently from all the other channels.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Noise Reduction  
With Noise Reduction, this helps take our static or noise from a channel that may not be  
coming in clearly.  
Press the MENU button  
Noise Reduction  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Noise Reduction"  
To enter  
Off  
Low  
High  
To select the mode “Low”, “High” or “Off”  
Press the MENU button when finished  
(VSM) Velocity Scan Modulation  
Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help  
accentuate the differences in picture brightness to sharpen the edges of images.  
Press the MENU button  
VSM  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "VSM"  
To enter  
To turn VSM ON or OFF  
On  
Off  
Press the MENU button when finished  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a program  
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges  
of these programs, choose "Natural Cinema" and set it to "On". Natural Cinema helps correct  
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the  
television rate of 30 frames-per-second.  
Press the MENU button  
Natural Cinema  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Natural Cinema"  
To enter  
On  
Off  
To select the mode "On" or "Off”  
Press the MENU button when finished  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture on the screen vertically  
when the aspect is set to panorama, cinema, or full.  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To Position Adjustment  
To enter  
To adjust the position  
Press the MENU button to finish  
OK  
BACK  
MENU  
Operate  
Reset  
Back  
Exit  
Notes:  
To reset the adjustment to the center, press the OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at it’s  
maximum limit.  
• If you select regular size with aspect, position adjustment option is not seen.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically when the aspect is set  
Panorama Zoom or Cinema Zoom for 1080i and 720p signals.  
Reset  
Reset resets all picture adjustments at once to the default settings.  
Press the MENU button  
Picture Adjust  
2/2  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Reset"  
Video Status  
Standard  
Off  
Noise Reduction  
VSM  
On  
On  
Natural Cinema  
Position Adjustment  
Reset  
Press the OK button  
The onscreen menu disappears for a moment,  
and then the settings are reset to the default  
setting for all the picture adjustments.  
OK  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
Press the MENU button when finished  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
Balance – Adjust the level of sound between the TV’s left and right speakers with the balance  
setting.  
Adjust the Sound Settings  
Press the MENU button  
Sound Adjust  
Bass  
0
0
0
π†  
®  
π†  
®  
π†  
To "Sound Adjust"  
To enter  
To "Bass", "Treble" or "Balance"  
To adjust the setting  
To move to the next setting  
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
20  
Reset  
MENU  
BACK  
Select  
Operate  
Back  
Exit  
Press the MENU button when finished  
Notes:  
You can reset all sound adjustments you set at once as the default setting when you select  
reset. See page 48.  
Optical Out  
You can select the optical digital sound output, either PCM or Dolby Digital when your TV  
is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you  
can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects digital  
channels.  
Sound Adjust  
Bass  
0
0
0
Press the MENU button  
Treble  
Balance  
π†  
®  
To "Sound Adjust"  
To enter  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
20  
π†  
To "Optical Out"  
Reset  
BACK  
MENU  
®  
To select "PCM" or "DOLBY DIGITAL"  
Press the MENU button when finished  
Select  
Operate  
Back  
Exit  
Notes:  
• If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it  
cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 16.  
Manufactured under license from Dolby Laboratories. "Dolby", and  
the double-D symbol are trademarks of Dolby Laboratories.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Turn On Volume  
Turn On Volume allows you to set the volume level when you turn the TV on.  
Press the MENU button  
Sound Adjust  
Bass  
0
0
0
π†  
®  
π†  
®  
To "Sound Adjust"  
To enter  
To "Turn On Volume"  
To set the volume level  
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
20  
Current  
0
1
2
3
48  
49  
50  
Reset  
MENU  
BACK  
Select  
Operate  
Back  
Exit  
Press the MENU button to finish  
Volume Limit  
Volume Limit allows you to set the maximum volume level.  
Press the MENU button  
Sound Adjust  
Bass  
0
0
0
π†  
®  
π†  
®  
To "Sound Adjust"  
To enter  
To "Volume Limit"  
To set the maximum volume level  
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
20  
0
1
2
3
48  
49  
50  
Reset  
MENU  
BACK  
Select  
Operate  
Back  
Exit  
Press the MENU button to finish  
Reset  
Reset resets all Sound Adjustments at once to the default settings. See page 48 on how to use  
reset.  
Sound Adjust  
Bass  
0
0
0
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
20  
Reset  
MENU  
OK  
BACK  
Select  
Operate  
Back  
Exit  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
Set Clock  
The set clock function is described on page 21 as the interactive plug-in menu. You can  
choose to set the clock automatically, or manually. If you need to set the clock again, follow the  
steps below.  
Press the MENU button  
π†  
®  
π†  
®  
To "Clock/Timers"  
To enter  
To "Set Clock"  
To operate  
When you set the clock automatically, choose "Auto" by pressing the  
or  
®
arrows.  
π†  
®  
To Time Zone  
To select your time zone  
Clock/Timers > Set Clock  
Mode  
Auto  
Time  
--  
:
-- --  
Time Zone  
D.S.T.  
Atlantic  
On  
Atlantic  
Eastern  
Central  
Mountain  
Hawaii  
Alaska  
Pacific  
Start Clock  
MENU  
BACK  
π†  
®  
To D.S.T. (daylight savings time)  
To turn D.S.T. On or Off  
To "Start Clock"  
Select  
Operate  
Back  
Exit  
Press the OK button  
Press the MENU button when finished  
When you set the clock manually, choose "Manual" by pressing the  
or  
®
arrows.  
π†  
®  
π†  
®  
π†  
®  
To move to the hour  
To set the hour  
To move to minutes  
To set the minutes  
To Time Zone  
Clock/Timers > Set Clock  
Mode  
Manual  
Time  
10  
:
30 AM  
Time Zone  
D.S.T.  
Atlantic  
On  
Start Clock  
MENU  
To select your time zone:  
BACK  
Select  
Operate  
Back  
Exit  
(Atlantic, Eastern, Central, Mountain, Pacific, Alaska or  
Hawaii)  
π†  
®  
To D.S.T. (daylight savings time)  
To turn D.S.T. On or Off  
To "Start Clock"  
Press the OK button  
"Thank you !" will be displayed.  
Press the MENU button when finished  
Notes:  
• D.S.T. can be used only for US and Canada when it is set to "On" in the "Set Clock" menu.  
• Only when the "Mode" set to "Auto", the Daylight Savings Time feature automatically adjusts  
your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on  
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in  
October.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Clock/Timers > On / Off Timer  
Press the MENU button  
On Time  
10  
11  
:
:
30 AM  
30 AM  
3
Off Time  
Channel  
π†  
®  
π†  
®  
®  
To "Clock/Timers"  
On Volume  
Mode  
Current  
Once  
To enter  
On / Off Timer  
Yes
To "On/Off Timer"  
Set  
BACK  
MENU  
Select  
Operate  
Back  
Exit  
To operate (begins with "On Time")  
To set the hour (AM/PM) you want the TV to turn on  
To move to minutes  
®  
To set the minutes  
To accept "On Time" and move to "Off Time" (the time the TV will turn off). Set the  
"Off Time" the same way as "On Time"  
®  
To accept "Off Time" and move to "Channel"  
To select channel  
To "On Volume"  
®  
To set the volume level  
To move to "Mode"  
®  
Choose "Once" or "Everyday"  
®  
To "On/Off Timer"  
Choose "Yes" to accept the timer setting, choose "No" if you don’t wish to accept  
To "Set"  
Press the OK button  
Press the MENU button to exit the menu  
Notes:  
• The on/off time cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
• If your clock is not set, "Please set clock first !" will appear on the screen. Please see  
Manual Set Clock on page 51 to set the clock.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 12:  
0 (ZERO)  
1 (ONE)  
2 (TWO)  
Tune  
Lets you decide the input channel and select it. After you press the number buttons on the  
remote, press the TUNE button. For example, to move to channel 12:  
1 (ONE)  
2 (TWO)  
Press the TUNE button  
Input  
Selects the signal input source for the television: Video-1, 2, 3, 4, Digital-In1 or Digital-In2 for  
video devices like VCR’s DVD players, or camcorders.  
Press the INPUT button  
By every press of the INPUT button, you can change the input mode.  
Notes:  
• When you return to TV mode, press the RETURN+/TV button or direct 10 key pad.  
You can also access the "Front Menu" screen by using the MENU button on the side of the TV  
instead of the remote control. It has "Input", "Video Status" and "Aspect" menus. Choose  
"Input" by pressing Menu  
on the side panel and choose a mode by using the CHANNEL+/-  
buttons ( OPERATE ).  
®
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to receive,  
and navigate in the menus.  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level, and navigate in the menus.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Return +/TV  
The Return+/TV button has two functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CH– buttons.  
RETURN+/TV and hold for three seconds  
Return Channel (123-456)  
Programmed !  
The channel currently active has been programmed as your return+ channel. Now scan  
through the channels using the CHANNEL+/- buttons.  
RETURN+/TV  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.  
The message “Return Channel Cancelled !” will appear.  
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel  
return+.  
Sound  
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround), BBE  
and SMART SOUND on or off.  
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more  
effect.  
BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility  
and musical realism.  
Smart Sound - Decreases high sound levels, giving a regulated sound level.  
Press the SOUND button  
Sound Effect  
A.H.S  
Off  
Off  
On  
π†  
®  
To select "A.H.S.", "BBE" or "Smart Sound"  
To choose the setting  
BBE  
Smart Sound  
Press the MENU when finished  
OK  
MENU  
Select  
Operate  
Exit  
Note:  
• BBE is for AV-30W777 ONLY.  
Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under  
one or more of the following US patents: 5510752, 5736897. BBE and BBE symbol are  
registered trademarks of BBE Sound, Inc.  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Video Status  
The Video Status button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
Standard - Resets the picture display to the factory settings.  
Video Status  
Dynamic - Gives a vivid picture with better contrast when viewing in  
Standard  
a brightly lit room.  
Dynamic  
Theater - Gives a rich, film-like look to video when viewing in a  
Theater  
Game  
dimly lit room.  
Game - Used for when you are playing video games connected to  
your TV.  
Press the VIDEO STATUS button  
By every press of the VIDEO STATUS button, you change the mode.  
Note:  
You can also change the mode by pressing the πbuttons.  
You can also access the "Front Menu" screen by using the MENU button on the side of  
the TV instead of the remote control. It has "Input", "Video Status" and "Aspect" menus.  
Choose "Video Status" by pressing Menu  
).  
on the side panel and choose a mode by using  
the CHANNEL+/- buttons (  
OPERATE  
®
TheaterPro D6500K  
The TheaterPro D6500K color temperature technology function makes sure that the video you  
watch is set to the standard color temperature, so that what you see is as true to what the film  
to video editors intended it to be.  
Press the THEATER PRO button  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work for a total  
time of up to 180 minutes. When you press the SLEEP TIMER button once, the rest of the time  
will be displayed.  
Sleep Timer  
0 min.  
Press the SLEEP TIMER button twice  
15 min.  
By every press of the SLEEP TIMER button, you select the time for  
the timer to shut off  
30 min.  
45 min.  
60 min.  
90 min.  
120 min.  
180 min.  
60 seconds before the automatic shut off, this message will  
appear:  
Good Night !  
Push [SLEEP TIMER] button  
to extend.  
You then have 60 seconds to press the SLEEP TIMER button to delay the shut off.  
Note:  
You can also select the timer by pressing the πbuttons.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Display  
The display screen shows the current information as follows.  
Press the DISPLAY button  
Detailed mode  
Clock Mode  
Simple Mode  
Off  
Detailed Mode - Shows the channel, channel name, signal, rating information, current time,  
digital antenna level and scramble information, as well as the current time below.  
(
(
o
))  
(
(
S
))  
Dolby Digital  
TV PG  
D L  
S
V
NR  
108-1  
HD1080i CC  
WEWEWEW  
11:00PM - 11:30PM Football fun meeting  
10:15PM  
Clock Mode - Shows the current time.  
108-1  
Simple Mode - Shows the current channel and channel name or AV input.  
Off - Turns the display off.  
WEWEWEW  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock is not set, "Clock Not Set" will be displayed.  
• A signal being shown in Detailed Mode, will only show the kind of input and video signal you  
are receiving. However, the actual signal type you see will be different. This TV converts all  
signals to the 1080i format.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
Closed Caption  
On  
Notes:  
Smart Caption  
• Smart Caption will appear when you press the Muting button,  
only on channels where the broadcast contains closed  
Off  
captioning.  
• When you select "On", it will be the mode selected in the Closed Caption Menu.  
• See page 38 when you set the caption/text mode.  
You can also change the mode by pressing the πbuttons.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
PANORAMA - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
REGULAR - The regular ratio is used  
when you want to watch a 4:3 broadcast  
or recorded program without modifying the  
original picture to fit the dimensions of your  
16:9 screen. The 4:3 picture will fill the  
screen from top to bottom, while black bars  
will appear to fill up the remaining space  
along the picture’s sides. The 4:3 picture  
will be centered within the boundaries of the  
16:9 screen.  
CINEMA - This ratio “zooms in” on the  
center part of a 4:3 aspect picture, blowing  
it up to fill the 16:9 screen.  
SLIM - This aspect mode shrinks the  
screen of 16:9 to 4:3. There are some  
programming that is already stretched by  
mistake at broadcasting companies, so  
this mode corrects it. Black side bars will  
appear.  
FULL - This is the ratio to use when  
watching 16:9 High-Definition broadcasts.  
PANORAMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
CINEMA ZOOM - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
Receiving 16:9  
signal  
Receiving 4:3  
signal  
Aspect  
Aspect  
Panorama  
Cinema  
Full  
Panorama Zoom  
Cinema Zoom  
Full  
Regular  
Slim  
Notes:  
You can also choose the size by pressing the πbuttons.  
• When you change the aspect ratio or signal, reset the picture position to center.  
You can also access the "Front Menu" screen by using the MENU button on the side of the TV  
instead of the remote control. It has "Input", "Video Status" and "Aspect" menus. Choose  
"Aspect" by pressing MENU  
+/- buttons ( OPERATE  
®
on the side panel and choose a mode by using the CHANNEL  
).  
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
"Full" automatically. If the television receives a 4:3 signal from your HDMI device when you  
are in "Full" aspect mode, it will return to "Regular" aspect mode. If you change the aspect  
mode after the televison changed it to "Full" automatically, the televison will change to the  
aspect mode you choosed.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Favorite  
The Favorite button allows you to select your favorite channels easily. First, you must register  
the channels that you like. See how to register below.  
Press the FAVORITE button  
Favorite  
CBSXXXX  
The favorite channel list will appear.  
101  
π†  
To select the channel you want to watch  
102  
FOXXXX  
Press the OK button  
103-1  
PBSXXXX  
It will change to the channel you have selected.  
123-456 WEWEWEW  
107-2  
HBOXXXX  
ABCABC  
NHKNHK  
MBSMBS  
8
1
4
Register the favorite channel  
Press the channel number you want to register  
The channel program will change.  
Remove  
Press the FAVORITE button for three seconds  
The channel will be registered in the favorite channel list.  
Notes:  
• The maximum number of channels you can register is 24.  
• If you have registered the maximum number of channels, and try to register more channels,  
the oldest channel you registered will be deleted.  
Delete the favorite channel  
Press the FAVORITE button  
Favorite  
The favorite channel list will appear.  
101  
CBSXXXX  
FOXXXX  
102  
π†  
®  
To select the channel you want to delete  
To enter  
103-1  
PBSXXXX  
Do you really remove ch 101  
from this list ?  
123-456 WEWEWEW  
107-2  
HBOXXXX  
ABCABC  
NHKNHK  
MBSMBS  
The screen to the right will appear.  
8
1
4
®  
To "Yes"  
Press the OK button  
The channel was deleted.  
Yes  
No  
Remove  
Press the FAVORITE button when finished  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
ML/MTS  
ML/MTS technology allows several audio signals to be broadcast in analog at once, giving you  
a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP). When you are receiving a  
digital broadcast, it is possible to choose a language that you wish to receive.  
When receiving ANALOG broadcast  
Press the ML/MTS button  
MTS  
By every press of the ML/MTS button, you change the mode  
Stereo  
SAP  
Mono  
Notes:  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
• MTS unavailable if your television’s Input source is in Video-1, 2, 3, 4, Digital-In1, or  
Digital-In2 mode, as described on page 53.  
You can also change the mode by pressing the πbuttons.  
When receiving DIGITAL broadcast  
Press the ML/MTS button  
Multi Language  
By every press of the ML/MTS button, you change the  
language  
English  
Spanish  
Menu  
The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system. When a menu is displayed, press the MENU button to exit the  
menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Sub Channel  
The main channel sometimes has minor channels (Sub Channels). By using the SUB button,  
you can select a sub channel easily.  
For example, to move to sub channel 123-45:  
Press 1, 2 and 3 in order  
Press the SUB CH button  
Press 4 and 5 in order  
Press the TUNE button  
Note:  
• If there are more than 2 major channels, select the digital channel by using the πbuttons  
and then press the OK button.  
Guide  
You can view the program information from the GUIDE.  
Notes:  
• The GUIDE will not show the correct time and date if you have not performed the set clock  
function on your television. See page 51.  
• When the program information is not being broadcasted, it will not show the correct  
information.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
TV/CATV Slide Switch  
Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to  
operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.  
Note:  
• See page 23 for information on programming your remote for cable box operation.  
VCR/DVD Slide Switch  
You can control a VCR or DVD player with the buttons on the lower part of the remote control.  
Move the slide switch to VCR or DVD to operate.  
Notes:  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 24.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 25.  
VCR Buttons  
You can use this remote control to operate the basic functions of your VCR. These functions  
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and  
power off.  
Move the selector switch to VCR to operate.  
• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other  
manufacturer’s brand VCR, please see the code chart and instructions on page 24.  
DVD Buttons  
You can also use this remote control to operate the basic functions of your DVD player. These  
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,  
power on, and power off.  
Move the selector switch to DVD to operate.  
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other  
manufacturer’s brand DVD player, please see the code chart and instructions on page 25.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
• The antenna could be disconnected.  
There is no picture  
or sound  
• The input mode could be set improperly. See page 53.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 41.  
• The TV station may be having difficulties. Check to see if other stations are working.  
• Use the HDMI cable with HDMI logo  
. See page 18.  
You can not output audio using the OPTICAL OUTPUT when you have digital sound from  
an HDMI device connected the the HDMI 1 or HDMI 2 connection on the back of your TV.  
(See page 18).  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
• Check that the TV/CATV switch is in the proper position.  
You may be too far from the TV. You must be within 23 feet (7 meters).  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 41.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 42.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 52.  
• Check to see if the Sleep Timer was set. See page 55.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 51.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 46.  
• The Video Status mode may be turned to the wrong setting. See page 55.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 40% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 38.  
• Make sure the MTS settings are correct. See page 60.  
Stereo or bilingual  
programs can't be  
heard  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Information  
Weak Signal  
This OSD warning appears when the digital channel that you have selected is too weak to  
receive or no signal is being detected for that channel.  
No Program or Weak Signal  
Audio / Data Only Channel  
This OSD appears when the selected channel is not broadcasting any picture or sound, or is  
only broadcasting data information.  
Audio / Data Only Channel  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AV-30W777  
AV-30W767  
MODEL  
Reception  
Format  
NTSC, BTSC System (Multi-Channel Sound)  
ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 at ATSC,  
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable  
Reception  
Range  
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper  
and Ultra bands (191 channel frequency synthesizer system) at Analog  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
AC 120V, 60Hz  
Power Source  
Power  
Consumption  
200W  
30 inch / 95 cm  
measured diagonally  
full square  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
2 1/2 x 5 inch / 6.5 x 13 cm oval x 2  
75 ohms (VHF/UHF) (F-type connector)  
Antenna  
Terminal  
Video: 1 Vp-p, 75 ohms  
Audio: 500mVrms (-4dBvfs) high impediance  
External Input  
Jacks  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
S-Video Input  
Jack  
Component  
Input Jacks  
Y: 1Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p, 75 ohms  
Audio Output  
Jacks (FIX)  
FIX: 500 mVrms (-4dBvfs) Low impedance (400 Hz when modulated 100%)  
Digital Out (optical) x 1  
Optical Output  
Digital Audio  
HDMI jack x 2  
Digital–In  
Note: The Digital–In terminal is not compatible with picture signals of a  
personal computer  
Dimensions (In)  
WxHxD (cm)  
33 1/4 x 23 5/8 x 21 7/8  
84.2 x 59.9 x 55.4  
Weight (lbs / kg)  
Accessories  
115 / 52  
Remote control unit x 1, AA batteries x 2  
Specifications subject to change without notice.  
Notes:  
• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not  
recommended for your TV set.  
• The open source software is embedded in this product. For more information, please go to:  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Cooktop KG6407 AV G User Manual
Intel Computer Hardware PMB 601LF User Manual
Jacuzzi Hot Tub EU60 User Manual
Jet Tools Lathe JPL 358 User Manual
JVC Camera Accessories VF HP840U User Manual
Kenmore Oven 7904717 User Manual
Kenwood Toaster TTM322 User Manual
Keys Fitness Home Gym ST NBB User Manual
King Canada Dust Collector KC 3108KWRC User Manual
Kodak Digital Camera CX4310 User Manual