JVC CRT Television AV 30W575 User Manual

Color Television Users Guide

For Models:

AV-30W585

AV-30W575

Illustration of AV-30W585 and RM-C1257G

Important Note:

In the spaces below, enter the model and serial number of your television (located

at the rear of the television cabinet). Staple your sales receipt or invoice to the

inside cover of this guide. Keep this user’s guide in a convenient place for future

reference. Keep the carton and original packaging for future use.

Model Number:

LCT1636-001A-A

0604TNH-II-IM

Serial Number:

Download from Www.Somanuals.com. All Manuals Search And Download.

• As an “ENERGY STAR ” partner,

JVC has determined that this

product or product model meets the

“ENERGY STAR ” guidelines for energy

efficiency.

Important Safeguards

CAUTION:

Please read and retain for your safety.

Electrical energy can perform many useful functions. This TV set has been engineered and

manufactured to assure your personal safety. But improper use can result in potential

electrical shock or fire hazards. In order not to defeat the safeguards incorporated in this

TV set, observe the following basic rules for its installation, use and servicing. Also follow all

warnings and instructions marked on your TV set.

INSTALLATION

(POLARIZED-TYPE)

1 Your TV set is equipped with a polarized AC line plug (one

blade of the plug is wider than the other). This safety feature

allows the plug to fit into the power outlet only one way.

Should you be unable to insert the plug fully into the outlet,

try reversing the plug. Should it still fail to fit, contact your

electrician.

2 Operate the TV set only from a power source as indicated on the TV set or refer to the

operating instructions for this information. If you are not sure of the type of power supply to

your home, consult your TV set dealer or local power company. For battery operation, refer

to the operating instructions.

3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords

and broken plugs. They may result in a shock or fire hazard. Call your service technician for

replacement.

4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set

where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.

5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or

laundry tub, in a wet basement, or near swimming pool, etc.

6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code provides information with respect to proper

grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna discharge unit, connection

requirements for the grounding electrode.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 An outside antenna system should not be located in the vicinity of overhead power lines

or other electric light or power circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them might be fatal.

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRICAL

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ARTICLE 250, PART H)

NEC - NATIONAL ELECTRIC CODE

8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during

operation to be released.

Therefore:

— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,

rug, etc.

— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.

— Never cover the openings with a cloth or other material.

— Never place the TV set near or over a radiator or heat register.

9 To avoid personal injury:

— Do not place a TV set on a sloping shelf unless properly secured.

— Use only a cart or stand recommended by the TV set manufacturer.

— Do not try to roll a cart with small casters across thresholds or deep pile carpets.

— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

Use

10 Caution children about dropping or pushing objects into the TV set through cabinet

openings. Some internal parts carry hazardous voltages and contact can result in a fire or

electrical shock.

11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol

cleaner.

12 Never add accessories to a TV set that has not been designed for this purpose. Such

additions may result in a hazard.

Download from Www.Somanuals.com. All Manuals Search And Download.

PORTABLE CART WARNING

(Symbol provided by RETAC)

13 For added protection of the TV set during a lightning storm or when the TV set is to be left

unattended for an extended period of time, unplug it from the wall outlet and disconnect the

antenna. This will prevent damage to product due to lightning storms or power line surges.

14 A TV set and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the TV set and cart combination to overturn.

Service

15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the TV set.

C. If the TV set has been exposed to rain or water.

D. If the TV set does not operate normally by following the operating instructions. Adjust

only those controls that are covered in the operating instructions as improper adjustment

of other controls may result in damage and will often require extensive work by a

qualified technician to restore the TV set to normal operation.

E. If the TV set has been dropped or damaged in any way.

F. When the TV set exhibits a distinct change in performance — this indicates a need for

service.

16 Do not attempt to service this TV set yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service

personnel.

17 When replacement parts are required, have the service technician verify in writing that the

replacement parts he uses have the same safety characteristics as the original parts. Use

of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.

18 Upon completion of any service or repairs to this TV set, please ask the service technician

to perform the safety check described in the manufacturer’s service literature.

19 When a TV set reaches the end of its useful life, improper disposal could result in a picture

tube implosion. Ask a qualified service technician to dispose of the TV set.

20 Note to CATV system installer.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of

the NEC that provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building, as close to the

point of cable entry as practical.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Quick Setup . . . . . . . . . . . 7

Sound Adjust . . . . . . . . . 52

Unpacking your TV . . . . . . . . . . . . 7

TV Model . . . . . . . . . . . . . . . . 8

TV Remote Control . . . . . . . . . . . 11

Getting Started . . . . . . . . . . . . . 12

The Remote Control . . . . . . . . . . 12

Connecting Your Devices . . . . . . . 13

Interactive Plug In Menu . . . . . . . . 22

Sound Settings . . . . . . . . . . . . . 52

Adjust Sound Settings . . . . . . . . . 52

MTS (Multi-channel Sound) . . . . . . . 52

Reset . . . . . . . . . . . . . . . . . . 52

Clock Timers . . . . . . . . . . 53

Set Clock . . . . . . . . . . . . . . . . 53

On/Off Timer . . . . . . . . . . . . . . . 54

Remote Programming . . . . . 25

Button Functions . . . . . . . 55

Setting CATV, VCR and DVD Codes . . . 25

CATV or Satellite Codes . . . . . . . . 25

VCR Codes . . . . . . . . . . . . . . 26

DVD Codes . . . . . . . . . . . . . . 27

Search Codes . . . . . . . . . . . . . 28

Multi Screen Function . . . . . . . . . . 55

Index . . . . . . . . . . . . . . . . . 55

Twin . . . . . . . . . . . . . . . . . 55

Freeze . . . . . . . . . . . . . . . . 56

Swap . . . . . . . . . . . . . . . . . 56

Select . . . . . . . . . . . . . . . . 56

Power . . . . . . . . . . . . . . . . . . 57

Number Buttons . . . . . . . . . . . . . 57

Tune . . . . . . . . . . . . . . . . . . 57

Input . . . . . . . . . . . . . . . . . . . 57

Channel +/- . . . . . . . . . . . . . . 57

Volume +/- . . . . . . . . . . . . . . . 57

Return . . . . . . . . . . . . . . . 58

Sound . . . . . . . . . . . . . . . . . . 58

Muting . . . . . . . . . . . . . . . . . . 58

Video Status . . . . . . . . . . . . . . . 59

TheaterPro D6500K . . . . . . . . . . . 59

Sleep Timer . . . . . . . . . . . . . . . 59

Display . . . . . . . . . . . . . . . . . 60

C.C. . . . . . . . . . . . . . . . . . . . 60

Aspect . . . . . . . . . . . . . . . . . 61

Aspect Ratios . . . . . . . . . . . . . 61

Menu . . . . . . . . . . . . . . . . . . 62

OK . . . . . . . . . . . . . . . . . . . 62

Back . . . . . . . . . . . . . . . . . . . 62

TV/CATV Slide Switch . . . . . . . . . . 63

VCR/DVD Slide Switch . . . . . . . . . 63

VCR Buttons . . . . . . . . . . . . . . . 63

DVD Buttons . . . . . . . . . . . . . . . 63

Onscreen Menus . . . . . . . . 29

Using the Guide . . . . . . . . . . . . . 29

Onscreen Menu System . . . . . . . . . 30

Initial Setup . . . . . . . . . . 32

Auto Tuner Setup . . . . . . . . . . . . 32

Channel Summary . . . . . . . . . . . . 32

V-Chip . . . . . . . . . . . . . . . . . . 34

Set Lock Code . . . . . . . . . . . . . 40

Auto Demo . . . . . . . . . . . . . . . 40

Language . . . . . . . . . . . . . . . . 41

Closed Caption . . . . . . . . . . . . . 41

Auto Shut Off . . . . . . . . . . . . . . 42

XDS ID . . . . . . . . . . . . . . . . . 42

Tilt Correction . . . . . . . . . . . . . . 42

Noise Muting . . . . . . . . . . . . . . 43

Front Panel Lock . . . . . . . . . . . . 43

V1 Smart Input . . . . . . . . . . . . 44

Video Input Label . . . . . . . . . . . . . 44

Position Adjustment . . . . . . . . . . . . 45

Digital-In . . . . . . . . . . . . . . . . . 46

Digital-In Audio . . . . . . . . . . . . . 46

Center CH Input . . . . . . . . . . . . . 47

Audio Out . . . . . . . . . . . . . . . . 47

TV Speaker . . . . . . . . . . . . . . . 48

Light

Appendices . . . . . . . . . . 64

Picture Adjust . . . . . . . . . 49

Troubleshooting . . . . . . . . . . . . . 64

Warranty . . . . . . . . . . . . . . . . . 65

Authorized Service Centers . . . . . . . 66

Specifications . . . . . . . . . . . . . 67

Picture Settings . . . . . . . . . . . . . 49

Adjust Picture Settings . . . . . . . . . 49

Color Temperature . . . . . . . . . . . . 49

Digital Noise Clear . . . . . . . . . . . . 50

VSM . . . . . . . . . . . . . . . . . . . 50

Natural Cinema . . . . . . . . . . . . . 50

Reset . . . . . . . . . . . . . . . . . . 51

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Unpacking your TV

Thank you for your purchase of a JVC Color Television. Before you begin setting up your new

television, please check to make sure you have all of the following items. In addition to this

guide, your television box should include:

Two AA

Batteries

1 Remote Control

1 Television

TV CATV VCR DVD

POWER

MULTI SCREEN

TWIN

FREEZE SWAP

DISPLAY

INDEX

C.C.

SELECT

INPUT

SLEEP TIMER

SOUND

RETURN+

VIDEO STATUS TUNE

THEATER PRO ASPECT

LIGHT

MUTING

VOL

–

VOL

Note: Your television

and/or remote

–

BACK

VCR CHANNEL VCR/DVD

TV/VCR

POWER

PREV NEXT

REW

REC

PLAY

control may differ

from the examples

illustrated here.

STOP

PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1257G

Once you have unpacked your television, the next step is to connect it to your antenna/

cable or satellite system and to connect the audio/video devices you want to use with your

television. To make these connections you will use plugs like the ones illustrated below.

Component Cables

Composite Cables

Audio Cables

Coaxial Cables

Used to connect an

external antenna or

cable TV system to

your TV.

Used to connect audio/

video devices like

VCRs, DVD players,

stereo amplifiers, game

consoles, etc.

S-Video Cable

AV CompuLink Cable

Used to make video

connections with S-Video

VCRs, Camcorders and

DVD players.

Used to connect JVC

AV CompuLink capable components

for an automated home theater.

Note: AV-30W585 ONLY

We recommend that before you start using your new television, you read your entire User’s

Guide so you can learn about your new television’s many great features. If you’re anxious to

start using your television right away, a quick setup guide follows on the next few pages.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Rear Panel Diagram

MODEL : AV-30W585

75Ω

( VHF/UHF )

DIGITAL - IN

AUDIO

(ANALOG)

UNPLUG THE POWER

CORD FROM AC OUTLET

BEFORE REMOVING THE

REAR COVER

DÉBRANCHEZ LE CORDON DE LA

PRISE DE COURANT C. A. AVANT

DE RETIRER LE COUVERCLE

ARRIÈRE.

When the rear cover is removed, follow Une fois le couvercle arrière déposé

"CAUTION AT DISASSEMBLY" suivez l procédure « ATTENTION

procedure in the service manual before LORS DU DÉMONTAGE » décrite

VIDEO

(DIGITAL)

plugging the TV's power cord into an

AC outlet. Failure to follow the

procedure will result in PERMANENT

damage to some of the television

features.

dans une prise c.a. L'omission de

suivre la procédure causera des

dommages PERMANENTS à

certaines fonctions du téléviseur.

CENTER

CHANNEL IN

AUDIO

(DIGITAL)

SUBWOOFER

OUT

AUDIO OUT

COMPONENT VIDEO

AUDIO

VIDEO S VIDEO

OVER

INPUT

COMPULINK

OVER

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Rear Panel Diagram

MODEL: AV-30W575

75Ω

( VHF/UHF )

DIGITAL - IN

AUDIO

(ANALOG)

UNPLUG THE POWER

CORD FROM AC OUTLET

BEFORE REMOVING THE

REAR COVER

DÉBRANCHEZ LE CORDON DE LA

PRISE DE COURANT C. A. AVANT

DE RETIRER LE COUVERCLE

ARRIÈRE.

VIDEO

(DIGITAL)

When the rear cover is removed, follow Une fois le couvercle arrière déposé

"CAUTION AT DISASSEMBLY" suivez l procédure « ATTENTION

procedure in the service manual before LORS DU DÉMONTAGE » décrite

CENTER

CHANNEL IN

plugging the TV's power cord into an

AC outlet. Failure to follow the

procedure will result in PERMANENT

damage to some of the television

features.

dans une prise c.a. L'omission de

suivre la procédure causera des

dommages PERMANENTS à

certaines fonctions du téléviseur.

AUDIO

(DIGITAL)

SUBWOOFER

OUT

AUDIO OUT

COMPONENT VIDEO

AUDIO

VIDEO S VIDEO

OVER

INPUT

OVER

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Models

NOTE: Before you connect your television to another device, please refer to the proper

diagrams for your specific TV and remote. These will help assist you in understanding

how to connect your television to another device, as well as use the remote to set up

your television.

Side panel Diagram

MODELS: AV-30W585 and AV-30W575

INPUT 4

S-VIDEO

OVER

OPERATE

CHANNEL

VIDEO

–

L/MONO

AUDIO

VOLUME

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

TV Remote Control

POWER

TV CATV VCR DVD

MULTI SCREEN

TWIN

INDEX

C.C.

SWAP

SELECT

INPUT

FREEZE

DISPLAY

SLEEP TIMER

SOUND

RETURN+

TUNE

VIDEO STATUS

THEATER PRO

ASPECT

LIGHT

MUTING

CH +

VOL

–

CH –

BACK

VCR/DVD

POWER

VCR CHANNEL

PREV NEXT

TV/VCR

REW

REC

PLAY

STOP

PAUSE

OPEN/CLOSE

STILL/PAUSE

RM-C1257G

MODELS:

AV-30W585

AV-30W575

• For information on remote control buttons, see pages 55 - 63.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you

need to begin using your new television right away.

If you have questions, or for more detailed information on any of these steps, please consult

other sections of this manual.

Step 1 – The Remote Control

Before you can operate your remote control, you first

need to install the batteries (included).

Lift and pull the latch on the back of the remote control

to open. Insert two batteries (included) carefully noting

the “+” and “–” markings, placing the “–” end in the unit

first. Snap the cover back into place.

When you change the batteries, try to complete the

task within three minutes. If you take longer than

three minutes, the remote control codes for your

VCR, DVD, and/or cable box/satellite receiver may

have to be reset. See pages 25 - 28.

Key Feature Buttons

MUTING

The four key feature buttons at the center of the remote

can be used for basic operation of the television. The top

and bottom buttons will scan forward and back through the

available channels. To move rapidly through the channels

using JVC’s Hyperscan feature, press and hold CH+ or

CH–. The channels will zip by at a rate of five channels per

second. The right and left buttons will turn the volume up or

down. These buttons are also marked with four arrows and

are used with JVC’s onscreen menu system. To use the

onscreen menus, press the MENU button.

CH +

CH –

VOL

–

BACK

POWER

TV CATV

Basic Operation

Turn the television on and off by pressing the POWER button at the top right

corner of the remote. If this is the first time you are turning on the TV, the

interactive plug-in menu appears.

• Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if

you need to operate a cable box.

• Slide the VCR/DVD selector switch to VCR to control a VCR. Slide to

DVD to control a DVD player. Please see pages 25 to 28 for instructions on

programming your remote control to operate a cable box, VCR or DVD player.

V VCR DVD

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Step 2 – Connecting Your Devices

Please follow the flow chart below to determine which connection setup is right for you. Then,

refer to the appropriate diagrams to connect your television to other devices that you may

have. After you are finished connecting your devices, plug the power cord into the nearest

power outlet and turn on the TV.

A VCR is not necessary for operation of the television. If you follow these diagrams and the

television does not work properly, contact your local cable operator.

• To connect a DVD player, see Diagram #3. A DVD player is optional.

• If you have a satellite television system, please refer to the satellite TV manual.

Do you use a Cable TV Box?

Yes

Do you have a VCR?

Yes

Diagram #2 Diagram #1

Diagram #3 Diagram #1

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Diagram #1

Cable or Antenna

Output

75Ω

( VHF/UHF )

Coaxial Cable

OUT IN

TV Rear Panel

Cable Box

Note:

• If you do not have a cable box, connect the cable wire from the wall outlet into the back of

the TV.

Diagram #2

Cable or Antenna

Output

AUDIO

VIDEO

OVER

TV Rear Panel

INPUT

75Ω

( VHF/UHF )

OVER

Coaxial Cable

Two-Way

Splitter

VCR

OUT

Cable Box

Notes:

• If your VCR is a mono sound unit, it will have only one audio out jack. Connect it to the

LEFT AUDIO INPUT on the front of the TV.

• Use the S-Video connection if possible for superior picture quality.

• Your VCR must be turned on to view premium cable channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Notes:

• Green, blue and red are the most common colors for DVD cables. Some models may vary

colors. Please consult the user’s manual for your DVD player for more information.

• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete

one set of connections (DVD or audio output) before starting the other to avoid accidentally

switching the cables.

• You may also connect the DVD player to Input 1.

Diagram #3

Cable or Antenna

Output

Coaxial Cable

Two-Way

Splitter

OUT OUT

VCR

75Ω

( VHF/UHF )

OUT

COMPONENT VIDEO

AUDIO

VIDEO S VIDEO

OVER

INPUT

TV Rear Panel

OVER

Green

Blue

Red

AUDIO OUT

OUT

DVD Player (OPTIONAL)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to JVC AV CompuLink

Note: AV-30W585 ONLY

JVC’s AV CompuLink feature makes playing video tapes or DVDs totally automatic. Simply

insert a pre-recorded tape into your JVC brand VCR or DVD into your JVC DVD player

and the device will automatically turn on and begin playback. At the same time, using the

AV CompuLink, the VCR or DVD player sends a signal to the television telling it to turn on

and switch to the proper video input.

• The AV CompuLink cable may be included with the JVC AV CompuLink unit you

wish to connect. If it is not, contact JVC Parts Department at (800)-882-2345, or

www.jvcservice.com for part # EWP 805-012.

• AV CompuLink can only be used with JVC brand products.

To Connect: Plug one end of the AV CompuLink cable

AV Compu Link Cable

into the AV COMPULINK INPUT on your VCR, DVD, or

other CompuLink device. Plug the other end of the

AV CompuLink cable into the AV COMPULINK at the

rear of the television.

Note:

• The AV CompuLink cable has a male 3.5 mm (mono)

plug on each end.

TV Rear Panel

VCR

COMPULINK

OUT

AV CompuLink

Notes:

• In order for the VCR playback to begin automatically, the recording tabs must be removed

from the VHS tape. If the tab is in place, automatic switching will occur when you push the

VCR’s Play button.

• If your JVC brand VCR has “A code/B code remote control switching” (see your VCR’s

instruction book), using VCR A code will switch the TV to input 1.

• Refer to your DVD instruction book for detailed connection information.

• To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see

the receiver connection instructions for detailed connection information.

• AV CompuLink is compatible with select AV CompuLink receivers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a Camcorder

You may connect a camcorder, game console or other equipment to your television by using

the side input jacks (Input 4) located on the side of the television. You can also connect

these using the television’s rear input jacks, using the same instructions.

INPUT

S-VIDEO

OVER

VIDEO

CHANNEL

Camcorder

OPERATE

- OR -

L/MONO

AUDIO

VOLUME

1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on

the side of the TV, OR connect an S-Video cable from the side of the TV to the camcorder.

2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on

the side of the TV.

3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on

the side of the TV.

Note:

• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the

L/MONO on the side of the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to an External Amplifier

Subwoofer Out - Use a powered subwoofer with the surround feature to simulate a home

theater system. Simply connect the subwoofer to the back of the TV.

TV Rear Panel

Speaker

SUBWOOFER

OUT

AUDIO OUT

Powered

Subwoofer

Amplifier

1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the

LEFT AUDIO INPUT on the amplifier.

2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the

RIGHT AUDIO INPUT on the amplifier.

3) Connect a black cable from the SUBWOOFER OUT on the back of the TV to

the LINE INPUT of the subwoofer.

Notes:

• Refer to your amplifier’s manual for more information.

• You can use AUDIO OUTPUT for your home theater system.

Connecting to the Surround Amplifier

In multi-channel sound such as 5.1 channel, the speech characters are played back from the

center speaker.

A center speaker in a movie theater is set in back of the screen so it can recreate a

conversation scene in the movie more natually. By using your TV's speaker as the center

speaker, you can obtain the same sound effect as in a movie theater in you home theater

sound system.

TV Rear Panel

Front

Surround

CENTER

CHANNEL IN

CENTER CHANNEL OUTPUT

(VARIABLE OUTPUT)

1) Connect the Pin cable from the TV's CENTER CHANNEL INPUT terminal to the surround

amplifier's CENTER CHANNEL OUTPUT terminal.

Note:

• Please read the benefit of this feature on page 47.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a Digital TV Receiver

By connecting a Digital TV Reciever, high definition pictures can be displayed on your TV in

their digital form.

DTV Decoder

DIGITAL OUT

AUDIO OUT

TV Rear Panel

DIGITAL - IN

AUDIO

(ANALOG)

VIDEO

(DIGITAL)

HDMI to DVI Cable

AUDIO

(DIGITAL)

After the connections have been made,

tighten the screw to secure the cables.

1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to

the DIGITAL-IN on the back of your television.

2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO

DIGITAL-IN on the back of your television.

3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO

DIGITAL-IN on the back of your television.

• The digital-in terminal is not compatible with the picture signal of a personal computer.

• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television

with a DTV decoder.

Notes:

• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance

may be slightly shifted. Access the “DIGITAL-IN” in the initial setup menu to adjust it. (Refer

to page 46.)

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to

ANALOG. See "DIGITAL-IN AUDIO", page 46.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to a HDMI Compatible Device

By connecting a HDMI compatible device, high definition pictures can be displayed on your

TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI

compatible device.

HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all

digital audio/video interface. HDMI provides and interface between any audio/video source,

such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a

digital television (DTV).

HDMI Compatable Device

DIGITAL OUT

AUDIO OUT

TV Rear Panel

DIGITAL - IN

AUDIO

(ANALOG)

VIDEO

(DIGITAL)

AUDIO

(DIGITAL)

HDMI Cable

1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to

the DIGITAL-IN on the back of your television.

Note:

• When you do the above connection, set DIGITAL-IN AUDIO in the Initial Setup menu to

DIGITAL. See "DIGITAL-IN AUDIO", page 46.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Connections

Connecting to an AV Receiver using your television's

V1 Smart Input

By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture

sources from many different devices, without having to change or use the other input

connections on your TV. This allows you to free up the other input connections so you can

connect more devices to your television.

AV Receiver

TV Rear Panel

COMPONENT VIDEO

MONITOR

OUT

AUDIO

VIDEO

INPUT

OVER

INPUT

MONITOR OUT

OVER

1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1

on the back of your television.

2) Connect a Yellow Component Cable from the AV Receiver's MONITOR OUT, into the

VIDEO INPUT-1 on the back of your television.

3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y

VIDEO INPUT-1 on the back of your television.

4) Connect a Blue Component Cable from the AV Receiver's Pb MONITOR OUT, into the

Pb VIDEO INPUT-1 on the back of your television.

5) Connect a Red Component Cable from the AV Receiver's Pr MONITOR OUT, into the Pr

VIDEO INPUT-1 on the back of your television.

Notes:

• Please refer to your AV Receiver instruction manual for more information on connecting your

speakers and other devices like a DVD player.

• Use your AV Receiver's remote to switch to the different devices you have connected.

• Some AV Receivers may not respond when the V1 Smart Input function is turned on.

• If you have video connections for each input device connected to your AV Receiver, you

should not connect them using both S-Video and Composite connection at the same time

when you are using V1 Input as the V1 Smart Input. In this case we recommend using the

S-Video connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Step 3 – The Interactive Plug In Menu

When you turn your television on for the first time the interactive plug-in menu will appear. The

plug-in menu helps you to get your TV ready to use by letting you set your preferences for:

• The language in which you want the onscreen menus to appear.

• Setting the TV’s clock to the correct time so your timer functions will work properly. You can

choose “AUTO” or “MANUAL” for setting the clock.

• The auto tuner setup of which channels you wish to receive.

We recommend you complete the interactive plug-in items before you start using your

television.

Language

After the “JVC INTERACTIVE PLUG IN MENU” has been displayed, the TV automatically

switches to the LANGUAGE settings. You can choose to view your onscreen menus in three

languages: English, French (Français) or Spanish (Español).

√®

To choose a language:

(English, Français or Español)

LANGUAGE/LANGUE/IDIOMA

†

To NEXT (To set clock)

ENGLISH

SELECT OPERATE

EXIT

(To be continued...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Auto Clock Set

Before you use any of your TV’s timer functions, you must first set the clock. You may precisely

set your clock using the XDS time signal broadcast by most public broadcasting stations. If you

do not have this in your area, you will have to set the clock manually. See manual clock set

below. To set the clock using the XDS signal:

√®

†

To choose AUTO

To TIME ZONE

SET CLOCK

MODE

AUTO

-- : -- --

√®

To select your time zone: (Atlantic, Eastern,

Central, Mountain, Pacific, Alaska or

Hawaii)

TIME

TIME ZONE

D.S.T.

ATLANTIC

†

To move to D.S.T. (Daylight Savings Time)

√®

†

To turn D.S.T. ON or OFF

SELECT OPERATE

EXIT

To NEXT (To Auto Tuner Setup)

Notes:

• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight

Savings. The clock will move forward one hour at 2:00 am on the first Sunday in April. The

clock will move back one hour at 2:00 am on the last Sunday in October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Manual Clock Set

To set your clock manually (without using the XDS signal), choose MANUAL. If you choose

AUTO, see auto clock set above.

√®

†

To choose MANUAL

To TIME

SET CLOCK

√®

†

To set the hour

To minute

MODE

MANUAL

-- : -- --

TIME

TIME ZONE

D.S.T.

ATLANTIC

√®

†

To set the minute

To Start Clock

START CLOCK

SELECT OPERATE

EXIT

Note:

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

(To be continued...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Setup

Plug-In Menu

Auto Tuner Setup

In auto tuner setup, the TV automatically scans through all available channels, memorizing the

active ones and skipping over blank ones or channels with weak signals. This means when you

scan (using the Channel +/– buttons) you will receive only clear, active channels.

√®

To choose CABLE or AIR (or SKIP when

you skip Auto Tuner Setup)

AUTO TUNER SETUP

TUNER MODE

†

To START

CABLE

NOW

PROGRAMMING !

START

SELECT OPERATE

EXIT

Programming will take approximately

1 to 2 minutes.

When the setup is finished, THANK YOU!! SETUP IS NOW COMPLETE is displayed. Your

quick setup is now complete. You can now begin watching your television, or you can continue

on in this guide for more information on programming your remote control, or using the

JVC onscreen menu system to customize your television viewing experience.

Notes:

• Noise muting will not work during Auto Tuner Setup.

• Skip appears only for interactive plug-in menu.

• The interactive plug-in menu setting does not appear if your TV has been turned on before.

In this case, use the menu to perform these settings. See pages 41, 53 and 32.

Cable Box and Satellite Users: After your auto tuner setup is complete, you may, (depending

on the type of hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is

normal.

The Quick Setup is complete

STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

Setting the CATV, VCR and DVD Codes

You can program your remote to operate your cable box, satellite receiver, VCR or DVD

player by using the instructions and codes listed below. If the equipment does not respond

to any of the codes listed below or to the code search function, use the remote control

supplied by the manufacturer.

Cable Box or Satellite Codes

The remote control is programmed with cable box and satellite codes for power on/off,

channel up/down, and 10 key operation.

1) Find the cable box or satellite brand from the list of codes shown below.

2) Slide the 2-way selector switch to “CATV”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the cable box/satellite receiver.

• If your cable or satellite box does not respond to the first code, try the others listed. If it does

not respond to any code, try the search codes function, on page 28.

Cable Box

ABC

CODES

024

Cable Box

Puser

CODES

032

Digital

Satellite

Systems

CODES

Archer

032, 025

051, 032

022, 051

058, 059

024, 032, 025

029

RCA

061, 070

032

Echostar

100, 113, 114,

115

Cableview

Citizen

Realistic

Regal

058, 064, 040,

041, 042, 045,

068

Express VU

G.E.

100, 113

Curtis

106

Diamond

Eagle

Regency

034

G.I.

108

Rembrandt

037, 032, 051,

038

Gradiente

Hitachi

112

Eastern

GC Brand

Gemini

034

032, 051

022, 043

104, 111

Samsung

051

HNS (Hughes)

Scientific Atlanta 057, 058, 059

104

General Instrument 065, 024, 025,

026, 027, 020,

SLMark

051, 047

051, 056

032, 051

Panasonic

Philips

105

Sprucer

Stargate

102, 103

021, 022, 057,

023

040, 041, 042,

045, 058, 064

049, 024

Primestar

108

Hamlin

Telecaption

Teleview

Texscan

Tocom

067

Proscan

RCA

106, 109, 110

Hitachi

Jerrold

047, 051

044

065, 024, 025,

026, 027, 020,

021, 022, 057,

023

Sony

107

035, 036, 066

050

Star Choice

104, 108

Toshiba

Unika

Toshiba

Uniden

101

Macom

049, 050, 051,

054

102, 103

032, 025

Universal

Videoway

Viewstar

Zenith

022, 032

052

Magnavox

033

030

Memorex

Movietime

029, 030

063, 046

046

032, 051

039, 037, 048

Oak

Panasonic

055, 056, 060,

071, 073

Zenith/Drake

Satellite

Paragon

Philips

063

028, 029, 030,

052, 053, 031,

069

Pioneer

Pulsar

047, 062

051, 032

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

VCR Codes

The remote control is programmed with VCR codes for power on/off, play, stop, fast-forward,

rewind, pause, record, channel up/down operation.

1) Find the VCR brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.

3) Press and hold down the DISPLAY button, then enter the first code number listed with the 10

key pad.

4) Release the DISPLAY button, and confirm the operation of the VCR.

• If your VCR does not respond to the first code, try the others listed. If it does not respond to

any of the codes, try the search codes function on page 28.

• After you program your remote, some VCR buttons may not work properly. If so, use the

VCR’s remote.

• To record, hold down the REC button on the remote and press PLAY.

VCRs

CODES

035

027, 032, 095

VCRs

CODES

VCRs

CODES

Admiral

Aiwa

Marantz

Marta

003, 004, 005

064

Samsung

037, 060, 062,

033, 089

Samtron

Sansui

089

Akai

029, 072, 073, Memorex

024, 067

003, 026, 020,

052

074

038, 040, 047,

048, 041, 042

MGA

Audio Dynamic 003, 005

Sanyo

Scott

063, 067, 091,

071

Bell & Howell

Broksonic

Canon

063, 071

020, 026, 094

023, 025

043

Minolta

058, 045, 093

Mitsubishi

038, 040, 047,

048, 041, 042,

078, 090

059, 060, 062,

067, 038, 040,

047, 048, 026,

020

CCE

Multitech

NEC

047, 027, 062

Citizen

064

003, 004, 005,

000

024, 023

Sears

063, 064, 065,

066, 058, 000,

001

Craig

063, 029, 064

Curtis Mathes

045, 024, 027,

093

Olympic

Shintom

Sharp

075

Optimus

028, 021, 035,

064

026, 020

Daewoo

043, 059, 024,

092

003, 004, 005

035, 036, 080,

088

Orion

DBX

Panasonic

023, 024, 021,

022

Signature 2000 027, 035

Dimensia

Emerson

045, 093

Singer

Sony

075

043, 026, 077,

061, 025, 042,

020, 076

Penney

024, 058, 045,

063, 003, 004,

005, 093

028, 029, 030,

053, 054, 055

SV 2000

Sylvania

027

Fisher

Funai

063, 066, 067,

065, 071, 091

Pentax

Philco

058, 005, 045,

093

031, 023, 024,

027

027, 026, 020,

000

031, 024, 027,

023, 026, 020,

043

Symphonic

Tashiro

Tatung

027, 081

064

033, 045, 024

G.E.

Philips

031, 023, 024,

086

003, 004, 005

Go Video

037, 051, 049,

050, 089

Teac

003, 004, 027,

005

Pioneer

Proscan

023

Goldstar

064

045, 058, 023,

024, 031, 046,

059, 060, 033,

087, 093

Technics

021, 022, 023,

024

Gradiente

083, 084, 081,

000, 001

Teknika

Toshiba

024, 027, 070

059, 046, 079

Hitachi

023, 045, 058,

027, 081, 093

Quasar

021, 022, 023,

024

Vector Research 005

Instant Replay 024, 023

Wards

Yamaha

Zenith

035, 036, 067,

044, 064

Radio Shack

033, 024, 063,

036, 067, 040,

027

Jensen

JVC

003

000, 001, 002,

003, 004, 005

063, 003, 004,

005

033, 045, 058,

023, 024, 031,

046, 059, 060,

083, 084, 085,

087, 093

RCA

Kenwood

LXI

003, 004, 064,

005

044, 082, 064,

094

027, 064, 058,

065, 066, 063,

067

Realistic

024, 063, 036,

067, 040, 027

Magnavox

031, 023, 024,

086

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,

rewind, previous/next chapter, tray open/close, and still/pause operation.

1) Find the DVD player brand from the list of codes shown below.

2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.

3) Press and hold down the Display button, then enter the first code number listed with the 10

key pad.

4) Release the Display button, and confirm the operation of the DVD player.

• If your DVD player does not respond to the first code, try the others listed. If it does not

respond to any of the codes, try the search codes function on page 28.

• After you program your remote, some DVD buttons may not work properly. If so, use the

DVD player’s remote.

DVD Player

Aiwa

CODES

043

DVD Player

RCA

CODES

021, 026

Apex

040

Sampo

Samsung

Sharp

034

030

028

038

Denon

Hitachi

JVC

020, 037

030, 031

000

Silvania

Sony

Kenwood

Konka

035

024, 045, 046,

047

039

Mitsubishi

Onkyo

Oritron

Panasonic

Philips

Pioneer

Raite

025

Technics

Toshiba

Vialta

020

041

023

044

050

020

Wave

042

023, 036

022

Yamaha

Zenith

020

027, 032

033

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Programming

Search Codes

Cable/Satellite Search Codes Function

1) Slide the first 2-Way Mode Selector switch to CATV.

2) Press the POWER and RETURN+ buttons. Hold for at least three seconds and release.

3) Press the POWER button on the remote, and see if the cable or satellite box responds.

4) If there was a response, press RETURN+. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use

the remote control that came with your equipment.

5) Press RETURN+ to exit.

VCR/DVD Search Codes Function

1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or

“DVD”.

2) Press the VCR or DVD POWER and RETURN+ buttons. Hold for at least three seconds and

release.

3) Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

4) If there was a response, press RETURN+. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (40 times for

the DVD player), and there is no response, use the remote control that came with your

equipment.

5) Press Return+ to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

Using the Guide

Certain symbols are used throughout this guide to help you learn about the features of your

new television. The ones you will see most frequently are:

π† Up and Down arrows mean press the CH+ or CH– buttons. Pressing the CH+ or CH–

buttons let you:

• Move vertically in a main menu screen

• Move through a submenu screen

• Move to the next letter, number, or other choice in a submenu

• Back up to correct an error

• Scan through TV channels (when not in a menu screen)

√® Left and right arrows mean press the VOLUME+ or VOLUME– buttons to move left or right

to:

• Select a highlighted menu item

• Select an item in a submenu

• Select numbers in certain menu options

• Turn the volume up or down (when not in a menu screen)

The “press button” icon means you should press the button named on your remote

control. (Button names appear in SMALL CAPITAL LETTERS.)

The “helping arrow” icon points to the highlighted or selected item in a menu.

To bring up the onscreen menu, press the MENU button on the remote control. The item that

appears in green is the one currently selected. If you use the MENU button on the TV’s side

panel instead of the remote, an additional menu screen showing INPUT, VIDEO STATUS and

ASPECT will appear between INITIAL SETUP and PICTURE ADJUST. The “interactive plug-in

menu” will appear the first time the TV is plugged in.

INITIAL SETUP

AUTO TUNER SETUP

CHANNEL SUMMARY

V-CHIP

SET LOCK CODE

OFF

AUTO DEMO

(4/4)

SELECT OPERATE

EXIT

Note:

• Menus shown in this book are illustrations, not exact replications of the television’s onscreen

displays.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

The Onscreen Menu System

Your television comes with JVC’s onscreen menu system. The onscreen menus let you make

adjustments to your television’s operation simply and quickly. Examples of the onscreen

menus are shown on the next page. Detailed explanations on using each menu follow later in

this guide. For information about the interactive plug-in Menu, see pages 22 - 24.

The Onscreen Menu System

To open the onscreen menu system, press the MENU button on the remote control. You

navigate within the onscreen menus by using the four directional arrow buttons on the remote

control. (These buttons are also the CH +/– and VOL +/– buttons. Channel and volume functions

will not operate when the onscreen menu is active).

The selected feature and option on a menu screen are highlighted in a different color.

Selected Option

(Green)

ENG. FRAN. ESP.

LANGUAGE

Selected Option

(Blue)

CLOSED CAPTION

To move to a different feature use the π† arrows to move up or down the list. When you

press the up arrow at the top of the list or the down arrow at the bottom, the next menu screen

will appear. Use the arrows √ ® to select an option from the highlighted feature. Pressing

MENU on the remote control will close the onscreen menu system and return you to normal

television viewing.

Each menu and its features will be discussed in the following pages of this guide.

Notes:

• If you do not press any buttons for a few seconds, the onscreen menu will automatically

shut off.

• Button names in this guide are shown in SMALL CAPITAL LETTERS.

• Menus may appear in different sizes onscreen depending on the aspect ratio selected.

• Some menu items may not appear in menu screens when certain aspect ratios or inputs

are selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Onscreen Menus

Press the MENU button

INITIAL SETUP

LANGUAGE

ENG. FRAN. ESP.

AUTO TUNER SETUP

CHANNEL SUMMARY

V-CHIP

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

SET LOCK CODE

AUTO DEMO

OFF

TILT CORRECTION

(4/4)

(3/4)

SELECT OPERATE

EXIT

SELECT OPERATE

EXIT

Notes:

INITIAL SETUP 03

INITIAL SETUP 04

• The DIGITAL-IN

menu can only be

displayed when

a 480p picture

signal is input

to the digital-in

terminal and the

picture is being

displayed on the

screen.

INITIAL SETUP

PICTURE ADJUST

STANDARD

NOISE MUTING

OFF

TINT

FRONT PANEL LOCK

V1 SMART INPUT

COLOR

PICTURE

BRIGHT

DETAIL

VIDEO INPUT LABEL

POSITION ADJUSTMENT

COLOR TEMPERATURE

LOW

(1/2)

(2/4)

• When the MENU

button on the

TV front panel

is pressed, the

FRONT PANEL

CONTROL

SELECT OPERATE

EXIT

SELECT OPERATE

EXIT

INITIAL SETUP 02

PICTURE ADJUST 01

PICTURE ADJUST

INITIAL SETUP

menu between

INITIAL SETUP

04 and PICTURE

ADJUST 01 will

appear.

STANDARD

OFF

DIGITAL-IN

DIG. NOISE CLEAR

VSM

SIZE1

DIGITAL

DIGITAL-IN AUDIO

CENTER CH INPUT

AUDIO OUT

NATURAL CINEMA

AUTO

VARI

TV SPEAKER

RESET

• VIDEO INPUT

LABEL:

(2/2)

(1/4)

SELECT OPERATE

EXIT

SELECT OPERATE

EXIT

AV-30W575

ONLY.

PICTURE ADJUST 02

INITIAL SETUP 01

SOUND ADJUST

CLOCK TIMERS

SET CLOCK

BASS

TREBLE

BALANCE

MTS

ON OFF TIMER

STEREO SAP MONO

RESET

SELECT OPERATE

EXIT

SELECT OPERATE

EXIT

SOUND ADJUST

CLOCK/TIMERS

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 24 as the interactive plug-in menu. If you

need to run the auto tuner setup again, follow the steps below.

Press the MENU button

AUTO TUNER SETUP

π†

√®

To AUTO TUNER SETUP

To operate

TUNER MODE

CABLE

To choose CABLE or AIR

Press the OK button to start

PRESS TO START

SELECT OPERATE

EXIT

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the

message PROGRAMMING OVER! appears onscreen.

Press the MENU button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You

can add or delete channels from the line-up or prevent any unauthorized viewers from watching

any or all 181 channels.

Press the MENU button

CHANNEL SUMMARY

π†

To CHANNEL SUMMARY

To operate

CHNO. SCAN

HBO

√®

MTV

The Channel summary screen will now be displayed with

the channels set to scan marked with an “√”. You can

delete channels from the scan by removing the “√”. If any

channels were missed during auto tuner setup and you

wish to add them, you may by placing an “√” next to the

channel number.

A&E

SELECT

OPERATE

EXIT

π†√® To the SCAN column

Press the OK button to include or delete from scan

Press the MENU button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

How to set the channel label: (AV-30W575 ONLY)

Press the MENU button

π†

√®

π†

To CHANNEL SUMMARY

To operate

To the ID column

CHANNEL 09

RESET

Press the OK button to enter

PRESS TO FINISH

√®

π†

To select the character you want

To move to the next space

SELECT OPERATE

EXIT

...continue to follow these directions for all four

spaces

Press the OK button to finish

Your characters are now set

Press the MENU button when finished

If you want to reset the characters you set:

Press the MENU button

π†

√®

π†

To CHANNEL SUMMARY

To enter

To select RESET

Press the OK button to finish

Your characters are now reset

Notes:

• You can use characters for: Alphabet, numbers, marks and spaces.

• It is possible to set the maximum of 40 channel labels.

• If you try to set more than the 40 maximum, the message "MEMORY OVERFLOW" will

appear.

You can block access to a channel by activating the channel lock.

Press the MENU button

π†

To CHANNEL SUMMARY

To operate

√®

π†√® To the Lock Column (

)

Press the ZERO button to lock or unlock that channel

Press the MENU button when finished

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

To watch a channel that you have locked, enter the

Lock Code using the 10 key pad.

If the wrong code is entered, the message

“INVALID LOCK CODE!” will flash on the screen.

THIS CHANNEL IS LOCKED BY

CHANNEL GUARD.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

The channel cannot be accessed until the correct code

is entered.

No. - - - -

Notes:

• Once a channel has been unlocked, it will remain unlocked until the television is turned off.

• See also “Set Lock Code”, page 40.

V-Chip

Your TV is equipped with V-Chip technology which enables you to block channels or content

that you feel to be inappropriate for children, based on US and Canada rating guidelines.

V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.

Note: Some programs, and movies are broadcast without a ratings signal. Even if you set

up V-CHIP ratings limits, these programs will not be blocked. See page 35 for information on

how to block unrated programs.

Note (for Canadian viewers): The V-Chip function is based on specifications designed for

the United States and therefore may not work properly in Canada.

You can customize the V-Chip settings of your television to match your personal tastes. The

V-Chip menu below is the starting point for your V-Chip settings

You can use US V-Chip settings (for programming broadcast from the United States), Canadian

V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use

any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting

each of the three V-Chip formats appear in the next six pages along with descriptions of the

rating categories.

To access the rating categories:

Press the MENU button

V-CHIP

OFF

π†

√®

To V-CHIP

To operate (Lock icon

SET US TV RATINGS

SET MOVIE RATINGS

SET CANADIAN RATINGS ENG

SET CANADIAN RATINGS FRE

UNRATED

will appear)

Press ZERO to access the V-Chip menu

VIEW

√®

To turn V-Chip ON or OFF (V-Chip must be

turned ON for rating settings to operate)

SELECT OPERATE

EXIT

π†

To move to SET US TV RATINGS,

SET MOVIE RATINGS, or

SET CANADIAN RATINGS (see following

pages for descriptions of each item)

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Unrated Programs

Unrated programming refers to any programming which does not contain a rating signal.

Programming on television stations which do not broadcast rating signals will be placed in the

“Unrated Programming” category.

Examples of Unrated programs:

• Emergency Bulletins

• News

• Public Service Announcements

• Sports

• Locally Originated Programming

• Political Programs

• Religious Programs

• Weather

• Some Commercials

Note:

• TV programs or movies that do not have rating signals will be blocked if the unrated category

is set to BLOCK.

Directions to Block Unrated Programs

You can block programs that are not rated.

Press the MENU button

V-CHIP

OFF

V-CHIP

π†

To V-CHIP

SET US TV RATINGS

SET MOVIE RATINGS

SET CANADIAN RATINGS ENG

SET CANADIAN RATINGS FRE

UNRATED

√®

To operate (The lock icon

appears)

Press ZERO to access V-Chip setup options

VIEW

π†

To UNRATED

√®

To VIEW or BLOCK

SELECT OPERATE

EXIT

Press MENU when done

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

US V-Chip Ratings

U.S. PARENTAL RATING SYSTEMS

Programs with the following ratings are appropriate for children.

❒ TV Y is Appropriate for All Children

Programs are created for very young viewers and should be suitable for all ages, including

children ages 2 - 6.

❒ TV Y7 is for Older Children

Most parents would find such programs suitable for children 7 and above. These programs

may contain some mild fantasy violence or comedic violence, which children should be able

to discern from reality.

Programs with the following ratings are designed for the entire audience.

❒ TV G stands for General Audience

Most parents would find these programs suitable for all age groups. They contain little or no

violence, no strong language, and little or no sexual dialog or situations.

❒ TV PG Parental Guidance Suggested

May contain some, but not much, strong language, limited violence, and some suggestive

sexual dialog or situations. It is recommended that parents watch these programs first, or

with their children.

❒ TV 14 Parents Strongly Cautioned

Programs contain some material that may be unsuitable for children under the age of 14

including possible intense violence, sexual situations, strong coarse language, or intensely

suggestive dialog. Parents are cautioned against unattended viewing by children under 14.

❒ TV MA Mature Audiences Only

These programs are specifically for adults and may be unsuitable for anyone under 17

years of age. TV MA programs may have extensive V, S, L, or D.

Viewing Guidelines

In addition to the ratings categories explained above, information on specific kinds of content

are also supplied with the V-Chip rating. These types of content may also be blocked. The

content types are:

• V/FV is for VIOLENCE/FANTASY VIOLENCE

• S stands for SEXUAL CONTENT

• L stands for strong LANGUAGE

• D stands for suggestive DIALOG

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Setting US V-Chip Ratings

Press the MENU button

V-CHIP

OFF

π†

√®

To V-CHIP

To operate (lock icon

SET US TV RATINGS

SET MOVIE RATINGS

SET CANADIAN RATINGS ENG

SET CANADIAN RATINGS FRE

UNRATED

appears)

Press ZERO to access the V-Chip menu

VIEW

√®

π†

√®

To turn V-Chip ON or OFF

To move to SET US TV RATINGS

To operate

SELECT OPERATE

EXIT

Directions to set US V-Chip Ratings

Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and

press the π† or √® to move the cursor to the correct location. Press OK to turn the locking

feature on or off. An item is locked if the

icon appears instead of a “—”.

For example. To block viewing of all TV 14 shows, move the cursor to the top row of that

column and add a lock icon. Once you’ve put a lock on the top row, everything in that column

is automatically locked.

π†√® To the TV 14 Column

SET US TV RATINGS

Press the OK button to lock

MA 14

Press the MENU button when finished

V/FV

Note:

• If you want to change the setup, move the cursor to

the top column and change the lock icon to “—” by

pressing OK again. You may then select individual

categories to block.

EXIT

SELECT

OPERATE

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Movies Ratings

❒ NR – Not Rated

This is a film which has no rating. In many cases these films were imported from countries

which do not use the MPAA ratings system. Other NR films may be from amateur producers

who didn’t intend to have their film widely released.

NR (Not Rated) Programming may contain all types of programming including children’s

programming, foreign programs, or adult material.

❒ G – General Audience

In the opinion of the review board, these films contain nothing in the way of sexual content,

violence, or language that would be unsuitable for audiences of any age.

❒ PG – Parental Guidance

Parental Guidance means the movie may contain some contents such as mild violence,

some brief nudity, and strong language. The contents are not deemed intense.

❒

PG-13 – Parents Strongly Cautioned

Parents with children under 13 are cautioned that the content of movies with this rating may

include more explicit sexual, language, and violence content than movies rated PG.

❒ R – Restricted

These films contain material that is explicit in nature and is not recommended for

unsupervised children under the age of 17.

❒ NC-17 – No One Under 17

These movies contain content which most parents would feel is too adult for their children

to view. Content can consist of strong language, nudity, violence, and suggestive or explicit

subject matter.

❒ X – No One under 18

Inappropriate material for anyone under 18.

Directions to set Movie (MPAA) Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (Lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET MOVIE RATINGS

To enter movies menu

For example:

To block viewing of X and NC-17 rated from shows:

SET MOVIE RATINGS

π†√® To the X Column

Press the OK button to lock

π†√® To the NC-17 Column

Press the OK button to lock

Press the MENU button to finish

_C17

_G13

EXIT

SELECT

OPERATE

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Canadian V-Chip Ratings

❒ E – Exempt

Exempt programming includes: news, sports, documentaries and other information

programming, talk shows, music videos, and variety programming.

❒ C – Programming Intended for Children

Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive

behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or

unrealistic in nature.

❒ C8+ – Programming Intended for Children 8 and Over

Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low

intensity and will show the consequences of the acts. There will be no offensive language,

nudity or sexual content.

❒ G – General Audience

Programming will contain little violence and will be sensitive to themes which could affect

younger children.

❒ PG – Parental Guidance

Programming intended for a general audience, but which may not be suitable for younger

children. Parents may consider some content not appropriate for children aged 8-13.

❒ 14+ – 14 Years and Older

Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and

early teens. Programming may contain mature themes and scenes of intense violence.

❒ 18+ – Adult

Material intended for mature audiences only.

Directions to set Canadian V-Chip Ratings

Press the MENU button

π†

√®

To V-CHIP

To operate (lock icon

appears)

Press ZERO to access V-Chip setup options

π†

√®

To SET CANADIAN RATINGS ENG (for English)

To enter ratings menu

For example:

SET CANADIAN RATINGS ENG

To block viewing of programming rated 14+ and

18+:

18+

14+

√®

To the 18+ Column

Press the OK button to lock

To the 14+ Column

√®

Press the OK button to lock

Press the MENU button to finish

EXIT

SELECT

OPERATE

Note:

• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 39 in the

French side of this user’s guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Set Lock Code

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-

set with a lock code of “0000”. You may change the code to any four-digit number you wish. To

change the lock code, follow the steps below.

Press the MENU button

SET LOCK CODE

π†

To SET LOCK CODE

To operate (lock icon

LOCK CODE

0000

√®

appears)

Press ZERO to access the lock code

The first digit will be highlighted

PRESS

TO FINISH

√®

π†

To select the number

SELECT OPERATE

EXIT

To move to the next digit

Continue to follow these directions for all four numbers

Press the OK button to finish (your lock code is now set)

Press the MENU button when finished

When a viewer attempts to watch a blocked channel,

this message appears:

THIS PROGRAMMING EXCEEDS

YOUR RATING LIMITS.

PLEASE ENTER LOCK CODE BY

10 KEY PAD TO UNLOCK IT.

No. - - - -

The channel will remain blocked until the correct lock

code is entered (see above for information on setting

your lock code).

Notes:

• After a power interruption you must reset the lock code.

• Write your lock code number down and keep it hidden from potential viewers.

• If you forget the lock code, a new code may be set using the steps listed above.

Auto Demo

This function lets you preview the many different viewing modes of your TV. It will cycle

through “Multi Screen Demo”, “Picture in Picture Demo”, the different “16:9” ratios and all of the

different “Video Status” modes.

Press the MENU button

INITIAL SETUP

AUTO TUNER SETUP

π† To AUTO DEMO

CHANNEL SUMMARY

√®

To turn AUTO DEMO ON or OFF

V-CHIP

SET LOCK CODE

AUTO DEMO

Note:

OFF

• To stop auto demo, press the MENU button, and select

auto demo by pressing the π† buttons, and turn it off

by pressing the √® buttons. Press the MENU button to

finish.

(4/4)

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Language

The language function is described on page 22 as the interactive plug-in menu. If you need to

choose the language again, follow the steps below.

Press the MENU button

INITIAL SETUP

π†

To LANGUAGE

LANGUAGE

ENG. FRAN. ESP.

√®

To choose a language: ENG. (English), FRAN.

(French) or ESP. (Spanish)

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

Press the MENU button when finished

TILT CORRECTION

(3/4)

SELECT OPERATE

EXIT

Closed Caption

Many broadcasts now include an onscreen display of dialog called closed captions. Some

broadcasts may also include displays of additional information in text form. Your television can

access and display this information using the closed caption feature. To activate the closed

caption feature, follow the steps below.

Press the MENU button

CLOSED CAPTION

π†

√®

π†

√®

To CLOSED CAPTION

To operate

MODE

TEXT

CC1

CAPTION

TEXT

To select CAPTION or TEXT in MODE

To select CAPTION or TEXT

To select a caption (CC1 to CC4) or text

channel (T1 to T4)

PRESS TO FINISH

SELECT OPERATE

EXIT

Press the OK button to save

Press the MENU button when finished

Notes:

• Closed caption subtitles are usually found on closed caption channel CC1. Some programs

may include additional text information which is usually found on text channel T1. The other

channels are available for future use.

• Closed captioning may not work correctly if the signal being received is weak or if you are

playing a video tape.

• Most broadcasts containing closed captioning will display a notice at the start of the program.

• To select the mode, press the C.C. button. See page 60.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Auto Shut Off

This function automatically shuts off your TV when there is no signal from the channel the

TV is on.

INITIAL SETUP

Press the MENU button

LANGUAGE

ENG. FRAN. ESP.

π†

√®

To AUTO SHUT OFF

To turn ON or OFF

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

Press the MENU button when finished

TILT CORRECTION

• If the channel that you have on does not receive a

signal for more than one minute, the blinking text

“NOT RECEIVING A SIGNAL AUTO SHUT OFF

IN 9 MIN.” appears on the screen, and starts the

(3/4)

SELECT OPERATE

EXIT

countdown. If no signal is being received within 10 minutes, the TV shuts itself off.

XDS ID

XDS ID Display provides a channel’s call letters, the network’s name, and even a program

name. The XDS ID information is provided by the broadcaster.

INITIAL SETUP

Press the MENU button

ENG. FRAN. ESP.

LANGUAGE

π†

√®

To XDS ID

To turn ON or OFF

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

Press the MENU button when finished

TILT CORRECTION

PURITY

SELECT OPERATE

EXIT

Tilt Correction

This adjusts the pictures so that it looks even on the screen and not lopsided.

Press the MENU button

INITIAL SETUP

π†

√®

To TILT CORRECTION

To enter

To adjust TILT CORRECTION

LANGUAGE

ENG. FRAN. ESP.

CLOSED CAPTION

AUTO SHUT OFF

XDS ID

OFF

TILT CORRECTION

Press the MENU button when finished

(3/4)

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Noise Muting

This feature inserts a blank blue screen over channels which are not broadcasting or are too

weak to be received clearly.

Press the MENU button

INITIAL SETUP

π†

√®

To NOISE MUTING

To turn noise muting ON or OFF

NOISE MUTING

OFF

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

Press the MENU button when finished

(2/4)

Note:

SELECT OPERATE

EXIT

• Noise muting will not work during auto tuner setup or

when you operate channel summary.

Front Panel Lock

This allows you to lock the keys on the front of the TV, so that a child may not accidentally

change your viewing preferences.

Press the MENU button

INITIAL SETUP

π†

√®

To FRONT PANEL LOCK

To turn ON or OFF

NOISE MUTING

OFF

FRONT PANEL LOCK

V1 SMART INPUT

Press the MENU button when finished

VIDEO INPUT LABEL

POSITION ADJUSTMENT

(2/4)

SELECT OPERATE

EXIT

You can turn off this feature in the following ways:

• Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your

remote control.

• Use the remote control.

• Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD

for FRONT PANEL LOCK will appear.

Note:

• To turn ON/OFF the TV, press the POWER button for more than 3 seconds. This feature will

remain ON.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

V1 Smart Input

This feature is used if you have connected an AV Receiver to your television. By turning this

feature on, your television can automatically detect the signal source from your components

that are connected to your AV Receiver.

Press the MENU button

INITIAL SETUP

π†

√®

To V1 SMART INPUT

To turn ON or OFF

NOISE MUTING

OFF

FRONT PANEL LOCK

V1 SMART INPUT

Press the MENU button when finished

VIDEO INPUT LABEL

POSITION ADJUSTMENT

Notes:

(2/4)

• If you do not have an AV Receiver connected to your

television, turn this feature OFF. By doing so, you can

take advantage of using AV CompuLink components

with your television.

SELECT OPERATE

EXIT

• Some AV Receivers may not work with this function.

Video Input Label

AV-30W575 ONLY

This function is used to label video input connections for

the onscreen displays.

INITIAL SETUP

NOISE MUTING

Press the MENU button

OFF

FRONT PANEL LOCK

V1 SMART INPUT

VIDEO INPUT LABEL

POSITION ADJUSTMENT

π†

√®

π†

√®

To VIDEO INPUT LABEL

To operate

(2/4)

To select the desired video input

SELECT OPERATE

EXIT

To select the desired preset input label (see

chart below)

VIDEO INPUT LABEL

VCR

Press the OK button to save

VIDEO-1

VIDEO-2

VIDEO-3

VIDEO-4

DIGITAL-IN

DVD

SAT

Press the MENU button when finished

GAME

STB

PRESS TO FINISH

SELECT OPERATE

EXIT

Preset

Labels

Select when...

You have a VCR connected to the video input

You have a DVD connected to the video input

VCR

DVD

You have a Digital VCR connected to the video input

You have a Set-top Box connected to the video input

You have a Satellite Receiver connected to the video input

You have an Amplifier connected to the video input

You have a Video Game connected to the video input

You have a Video Camera connected to the video input

You have a Video Disc player connected to the video input

D-VHS

STB

SAT

AMP

GAME

CAM

DISC

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically

when the aspect is set to panorama, cinema, or full.

Press the MENU button

π†

√®

To POSITION ADJUSTMENT

To enter

π†√® To adjust the position

Press the MENU button to finish

Notes:

RESET

EXIT

OPERATE

• To reset the adjustment to the center, press the

OK button.

• When the arrow disappears, while you are adjusting the position, the position is at it’s

maximum limit.

• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.

• When you change the screen size, perform the position adjustment again.

• Position adjustment allows you to adjust the screen position vertically and horizontally when

the aspect is set HD panorama or cinema zoom for 1080i and 720p signals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p

picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when

a HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of

HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the

position can be adjusted by selecting either SIZE1 or SIZE2.

Press the MENU button

INITIAL SETUP

π† To DIGITAL-IN

SIZE1

DIGITAL

DIGITAL-IN

DIGITAL-IN AUDIO

CENTER CH INPUT

AUDIO OUT

√® To enter

VARI

√® To select SIZE1 or SIZE2

Press the MENU button to finish

TV SPEAKER

(1/4)

SELECT OPERATE

EXIT

Note:

• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is

input to the Digital-In terminal and the picture is being displayed on the screen.

Digital-In Audio

This feature is used if you have a DTV or HDMI

compatible component connected to your TV.

INITIAL SETUP

SIZE1

DIGITAL

DIGITAL-IN

Press the MENU button

DIGITAL-IN AUDIO

CENTER CH INPUT

AUDIO OUT

VARI

π†

To DIGITAL-IN AUDIO

TV SPEAKER

√®

To select “ANALOG” or “DIGITAL”

Press the MENU button when ﬁnished

(1/4)

SELECT OPERATE

EXIT

Notes:

• If your DTV or HDMI component is capable of digital audio and video, choose DIGITAL. If

your DTV or HDMI component is capable of analog audio and digital video, choose ANALOG.

• Refer to your DTV or HDMI component’s instruction manual for more information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

Center CH Input

When you are using a surround system, you can substitute the speaker of this television for

the center speaker of you surround system. Set CENTER CH INPUT to ON when you use the

speaker as the center speaker of your surround system. It is possible to lock the volume when

it is ON separately from the volume when it is OFF.

INITIAL SETUP

Press the MENU button

SIZE1

DIGITAL

DIGITAL-IN

π†

√®

To CENTER CH INPUT

To adjust CENTER CH INPUT to “ON” or “OFF”

DIGITAL-IN AUDIO

CENTER CH INPUT

AUDIO OUT

VARI

Press the MENU button when finished

TV SPEAKER

(1/4)

Note:

SELECT OPERATE

EXIT

The normal speaker output is 20W 16Ω. The maximum is

40W. If you exceed the maximum, your speaker may break.

Audio Out

If your television is connected to an external speaker source, audio out gives you the option of

controlling the volume level with your TV’s remote control.

Press the MENU button

INITIAL SETUP

π†

To AUDIO OUT

To VARI or FIX

SIZE1

DIGITAL

DIGITAL-IN

√®

DIGITAL-IN AUDIO

CENTER CH INPUT

AUDIO OUT

Press the MENU button when finished

VARI

TV SPEAKER

VARI: Lets you adjust the volume of the external speakers

using the VOLUME+/– buttons on your TV’s remote control.

(1/4)

SELECT OPERATE

EXIT

FIX: The volume of the external speakers is adjusted

using the audio device’s remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the

audio through your stereo.

Press the MENU button

INITIAL SETUP

π†

√®

To TV SPEAKER

To turn the TV’s speakers ON or OFF

SIZE1

DIGITAL

DIGITAL-IN

DIGITAL-IN AUDIO

CENTER CH INPUT

AUDIO OUT

Press the MENU button when finished

VARI

TV SPEAKER

(1/4)

Notes:

SELECT OPERATE

EXIT

• Before you turn the TV speaker setting from OFF

to ON, make sure that the TV volume level is low! If the TV volume is set too high, the

sound level will be extremely loud.

• After a power interruption, the TV speaker settings will return to “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Picture Settings

These settings allow you to change and adjust the way the picture appears on your television.

TINT

Tint allows you to adjust the levels of red and green in your TV picture.

COLOR

The color function lets you make all the colors in the TV picture appear either more vivid or

subtle.

PICTURE

Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker

or brighter picture overall.

BRIGHT

You can adjust the overall brightness of the TV picture with the Bright control.

DETAIL

The Detail feature adjusts the level of fine detail displayed in the picture.

Adjust the Picture Settings

Press the MENU button

PICTURE ADJUST

TINT

STANDARD

π†

To TINT, COLOR, PICTURE, BRIGHT or

DETAIL

To enter

COLOR

PICTURE

BRIGHT

DETAIL

√ ®

+02

TINT

COLOR TEMPERATURE

LOW

(1/2)

√ ®

π†

To adjust the setting

To move to the next setting

SELECT OPERATE

EXIT

Press the MENU button when finished

Color Temperature

You can decide how strong or dull the colors appear on the TV screen.

Press the MENU button

PICTURE ADJUST

TINT

STANDARD

π†

√®

To COLOR TEMPERATURE

To enter

COLOR

PICTURE

BRIGHT

DETAIL

COLOR TEMPERATURE LOW HIGH

√®

To set LOW or HIGH

COLOR TEMPERATURE

LOW

(1/2)

Press the MENU button when finished

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Digital Noise Clear

With digital noise clear, this helps take our static or noise from a channel that may not be

coming in clearly.

Press the MENU button

DIG. NOISE CLEAR

π†

√®

π†

To DIG. NOISE CLEAR

To enter

To select the mode “LOW”, “HIGH” or “OFF”

OFF

LOW

HIGH

Press the MENU button when finished

(VSM) Velocity Scan Modulation

Velocity scan modulation circuitry varies the electron beam’s horizontal scanning speed to help

accentuate the differences in picture brightness to sharpen the edges of images.

Press the MENU button

PICTURE ADJUST

STANDARD

OFF

π†

√®

To VSM

To enter

DIG. NOISE CLEAR

VSM

NATURAL CINEMA

AUTO

VSM

ON OFF

RESET

√®

To turn VSM ON or OFF

(2/2)

SELECT OPERATE

EXIT

Press the MENU button when finished

Natural Cinema

Natural cinema corrects the problem of blurred edges which may occur when viewing a program

originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges

of these programs, choose NATURAL CINEMA and set it to AUTO. Natural Cinema helps correct

conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the

television rate of 30 frames-per-second.

NATURAL CINEMA

Press the MENU button

AUTO

π†

√®

π†

To NATURAL CINEMA

To enter

To select the mode “AUTO", "ON" or "OFF”

OFF

Press the MENU button when finished

Notes: The natural cinema mode is automatically set to “AUTO” in the following cases:

• Turning on or off

• Changing the channel or input mode

• Using multi-screen functions

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture Adjust

Reset

Reset resets all picture adjustments (tint, color, picture, bright, detail, color temperature, dig.

noise clear and VSM) at once to the default settings.

Press the MENU button

PICTURE ADJUST

STANDARD

π†

√®

To RESET

To enter

DIG. NOISE CLEAR

VSM

OFF

NATURAL CINEMA

AUTO

The onscreen menu disappears for a moment,

and then the settings are reset to the default

setting for all the picture adjustments.

RESET

(2/2)

Press the MENU button when finished

SELECT OPERATE

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

BASS – You can increase or decrease the level of low-frequency sound in the TV’s audio with

the bass adjustment.

TREBLE – Use treble to adjust the level of high-frequency sound in your TV’s audio.

BALANCE – Adjust the level of sound between the TV’s left and right speakers with the

balance setting.

Adjust the Sound Settings

Press the MENU button

SOUND ADJUST

π†

√ ®

π†

To BASS, TREBLE or BALANCE

To adjust the setting

To move to the next setting

BASS

TREBLE

BALANCE

MTS

STEREO SAP MONO

Press the MENU button when finished

RESET

Notes:

SELECT OPERATE

EXIT

• You can reset the sound adjustments (BASS, TREBLE

and BALANCE) you set at once as the default setting when you select reset. See page 45.

• You can adjust BALANCE only when A.H.S. is off. See page 58.

MTS (Multi-Channel Television Sound)

MTS technology allows several audio signals to be broadcast at once, giving you a choice

in what you wish to hear with a TV program. In addition to mono or stereo sound, an

MTS broadcast may also include a second audio program (SAP).

Press the MENU button

SOUND ADJUST

π†

To MTS

BASS

√®

Select the mode

TREBLE

BALANCE

MTS

(The ON AIR arrow tells you if a broadcast is in stereo

and/or contains an SAP).

STEREO SAP MONO

Press the MENU button when finished

RESET

SELECT OPERATE

EXIT

Notes:

• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo

mode even if a certain broadcast is in mono sound only.

• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.

• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.

• MTS unavailable if your television’s input source is in input 1, 2, 3 or 4 mode, as described

on page 57.

Reset

Reset resets all Sound Adjustments (Bass, Treble and Balance) at once to the default settings.

See page 51 on how to use reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

Set Clock

The set clock function is described on page 23 as the interactive plug-in menu. You can choose

to set the clock automatically, or manually. If you need to set the clock again, follow the steps

below.

Press the MENU button

π†

To SET CLOCK

To operate

√®

When you set the clock automatically, choose AUTO by pressing the

√

arrows.

π†

To TIME ZONE

SET CLOCK

√®

To select your time zone

MODE

AUTO

-- : -- --

ATLANTIC

EASTERN

CENTRAL

MOUNTAIN

TIME

HAWAII

ALASKA

PACIFIC

TIME ZONE

D.S.T.

ATLANTIC

π†

To D.S.T. (daylight savings time)

To turn D.S.T. ON or OFF

Press OK to finish

PRESS TO FINISH

√®

SELECT OPERATE

EXIT

Press the MENU button when finished

When you set the clock manually, choose MANUAL by pressing the

√

arrows.

π†

√®

π†

√®

To move to the hour

To set the hour

SET CLOCK

MODE

MANUAL

-- : -- --

To move to minutes

To set the minutes

Press OK to start clock

TIME

TIME ZONE

D.S.T.

ATLANTIC

PRESS TO START CLOCK

SELECT OPERATE

EXIT

THANK YOU !!

Press the MENU button when finished

Notes:

• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.

• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts

your TV’s clock for Daylight Savings. The clock will move forward one hour at 2:00 am on

the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in

October.

• You will have to reset the clock after a power interruption. You must set the clock before

operating any timer functions.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock/Timers

On/Off Timer

The on/off timer lets you program your television to turn itself on or off. You can use it as an

alarm to wake up, to help you remember important programs, or as a decoy when you’re not

home.

Press the MENU button

ON/OFF TIMER

7:00 PM

10:00 PM

ON TIME

π†

√®

†

To ON/OFF TIMER

OFF TIME

CHANNEL

ON VOLUME

MODE

To operate (begins with ON TIME)

To set the hour (AM/PM) you want the TV to turn on

To move to minutes

CURRENT

EVERYDAY

ON/OFF TIMER

PRESS TO FINISH

√®

†

To set the minutes

SELECT OPERATE

EXIT

To accept ON TIME and move to OFF TIME (the

time the TV will turn off). Set the OFF TIME the same way as ON TIME

To accept OFF TIME and move to CHANNEL

To select channel

†

√®

†

To ON VOLUME

√®

†

To set the volume level

To move to MODE

√®

Choose ONCE or EVERYDAY

†

To ON/OFF TIMER

√®

Choose YES to accept the timer setting, choose NO if you don’t wish to accept

Press the OK button to finish

Press the MENU button to exit the menu

Notes:

• The on/off time cannot be set to locked or guarded channels.

• In order for the on/off timer to work, the clock must be set.

• After a power interruption, the timer settings must be reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Multi Screen Function

Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).

Note: After you press any multiscreen button, if you press the menu button, only the picture

adjust screen will appear.

Index

This allows you to quickly look at up to 12 channels at a time so that you can decide which one

to watch.

Notes:

• Only RF input signal will be displayed.

• You can watch the channel added in channel summary. See page 31.

Twin

Activate the split-screen option by pressing Twin on

the remote control. The channel (or input) you were

watching before pressing Twin will appear on the left,

V-1

the new channel will appear on the right. The sound

will continue to come from the main screen channel

MAIN SCREEN

PICTURE

SPLIT SCREEN

PICTURE

(or input). To turn split-screen off and return to

normal television viewing, press TWIN again or press

the BACK button.

Notes:

• Main Screen and Split Screen will not display the same channel or input at the same time.

• You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.

• Split-screen functions will not work with locked channels or channels blocked by V-Chip

ratings limits. A grey screen will display instead.

• With split screen, the picture from the component terminal and DIGITAL-IN terminal will

not be displayed.

• The aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of

480p, 720p and 1080i from the component terminal and DIGITAL-IN terminal.

• After you press the Select button, and select SPLIT SCREEN when you press the

OK button, select normal screen. If you don’t operate, the MAIN CHANNEL SCREEN will

be automatically selected about 8 seconds later.

• Aspect does not work in Twin mode.

• When you press the MENU button in Twin mode, it appears only as Picture Adjust menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Freeze

Pressing the FREEZE button causes the screen to change to the split-screen display with the still

picture displayed on the right. In order to return to the normal display, press the FREEZE button

once again.

Note: When the screen is in freeze mode, if you do not operate it within 15 minutes, this

function will cancel out.

Swap

You can exchange the channel (or input) displayed in the split screen window for the main

screen image by pressing the SWAP button.

Select

With SELECT, you can select the picture (channel) while viewing SPLIT screen. When you

press SELECT button, the channel number on the top will be highlighted. Each press of SELECT

will shift the channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Power

Turns the TV on or off.

Press the POWER button

Number Buttons - 10Key Pad

Use the number buttons on the remote control to move directly to a specific channel. For

example, to move to channel 12:

0 (ZERO)

1 (ONE)

2 (TWO)

Tune

Lets you decide the input channel and select it. After you press the number buttons on the

remote, press the TUNE button. For example, to move to channel 12:

1 (ONE)

2 (TWO)

Press the TUNE button

Input

Selects the signal input source for the television: Input-1, 2, 3, 4 or DIGITAL-IN for video

devices like VCR’s DVD players, or camcorders.

Press the INPUT button

By every press of the INPUT button, you can change the input mode.

Notes:

• When you return to TV mode, press the RETURN+ button or direct 10 key pad.

• You can also access the FRONT PANEL CONTROL screen by using the MENU button on

the side of the TV instead of the remote control. It appears between INITIAL SETUP and

PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose

INPUT by pressing Menu

†

on the side panel and choose a mode by using the CHANNEL+/-

buttons ( OPERATE ).

√

Channel +/–

Use these buttons to move up or down all the available channels your TV is able to receive.

Volume +/–

Use these buttons to raise or lower the TV’s volume level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Return +

The Return+ button has two functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

RETURN+ and hold for three seconds

RETURN CHANNEL

PROGRAMMED!

The channel currently active has been programmed as your return+ channel. Now scan

through the channels using the CHANNEL+/- buttons.

RETURN+

You will return to your programmed channel.

• To cancel your return+ channel, press and hold the RETURN+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel

return+.

Sound

By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) mode,

BBE, and SMART SOUND on or off.

A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more

effect.

BBE - BBE High Definition Sound restores clarity and presence for better speech intelligibility

and musical realism.

SMART SOUND - Decreases high sound levels, giving a regulated sound level.

SOUND EFFECT

Press the SOUND button

π†

√®

To select A.H.S., BBE or SMART SOUND

To choose the setting

A.H.S.

MOVIE MUSIC OFF

ON OFF

BBE

SMART SOUND

ON OFF

OPERATE

EXIT

SELECT

Press the MENU when finished

Note: Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound,

Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered

trademarks of BBE Sound, Inc.

Muting

The MUTING button instantly turns the volume down completely when you press it. Press

MUTING and the volume level will instantly go to zero. To restore the volume to its previous

level, press MUTING again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Video Status

The Video Status button gives you a choice of four TV picture display settings, including a

display of your own preferences.

Standard - Resets the picture display to the factory settings.

VIDEO STATUS

Dynamic - Gives a vivid picture with better contrast when viewing in

STANDARD

a brightly lit room.

DYNAMIC

Theater - Gives a rich, film-like look to video when viewing in a

THEATER

dimly lit room.

GAME

Game - Used for when you are playing video games connected to

your TV.

Press the VIDEO STATUS button

By every press of the VIDEO STATUS button, you change the mode.

Note:

• You can also change the mode by pressing the π† buttons.

• You can also access the FRONT PANEL CONTROL screen by using the MENU button on

the side of the TV instead of the remote control. It appears between INITIAL SETUP and

PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose

VIDEO STATUS by pressing Menu

†

on the side panel and choose a mode by using the

CHANNEL+/- buttons ( OPERATE

√

® ).

TheaterPro D6500K

The TheaterPro D6500K color temperature technology function makes sure that the video you

watch is set to the standard color temperature, so that what you see is as true to what the film

to video editors intended it to be.

Press the THEATERPRO button

Sleep Timer

The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals

of 15 minutes, for a total time of up to 180 minutes.

Press the SLEEP TIMER button

0 15 30 45 60 75 90 105 120 135 150 165 180

Sleep Timer Message

20 seconds before the automatic shutoff, this message will appear:

GOOD NIGHT!!

PUSH SLEEP TIMER BUTTON

TO EXTEND

You then have 20 seconds to press the SLEEP TIMER button to

delay the shut off for another 15 minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Display

The display screen shows the current status of timers, inputs, and XDS ID.

Press the DISPLAY button

The screen to the right shows the following information:

05 KLVX PBS

• The current channel or AV input (Channel 05)

JAZZ FESTIVAL

• The current time (12:20 pm)

• Sleep timer status/minutes remaining (The Sleep Timer

is off)

• On/off timer status (Set to turn on everyday at 7:00 PM,

off at 10:00 PM)

NOW

12:20 PM

OFF

SLEEP TIMER

ON/OFF TIMER

EVERYDAY

7:00 PM

ON TIME

OFF TIME

10:00 PM

• Each Press of the DISPLAY button changes the display

mode:

Display

Time

Channel

Off

Display - Full screen shown above

Time - Shows the current time only

Channel - Shows the current channel

Off - Turns display off

Notes:

• You may also turn off the display at any step by pressing MENU.

• If the clock, sleep timer or on/off timer are not set, the display screen will show:

“CLOCK NOT SET”, “SLEEP TIMER OFF”, and “ON/OFF TIMER OFF” respectively.

C.C. (Closed Caption)

Use the C.C. (Closed Caption) button to select the mode of closed caption.

Press the C.C. button

AV-30W585 ONLY

OFF

SMART CAPTION

AV-30W575 ONLY

OFF

• Smart Caption will appear when you press the Muting button, only on channels where the

broadcast contains closed captioning. (AV-30W585 ONLY)

• When you select ON, it will be the mode selected in the Closed Caption Menu.

• See page 41 when you set the caption/text mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Aspect

This feature will help you adjust the picture you are watching to give you the best possible

picture quality.

Aspect Ratios

PANORAMA - With this ratio a normal

4:3 aspect picture is stretched to fit the

dimensions of the 16:9 aspect screen.

REGULAR - The regular ratio is used

when you want to watch a 4:3 broadcast

or recorded program without modifying the

original picture to fit the dimensions of your

16:9 screen. The 4:3 picture will fill the

screen from top to bottom, while black bars

will appear to fill up the remaining space

along the picture’s sides. The 4:3 picture

will be centered within the boundaries of the

16:9 screen.

CINEMA - This ratio “zooms in” on the

center part of a 4:3 aspect picture, blowing

it up to fill the 16:9 screen.

CINEMA ZOOM - This ratio stretches

the High-Definition 16:9 aspect image to

eliminate the black surrounding bars.

FULL - This is the ratio to use when

watching 16:9 High-Definition broadcasts.

HD PANORAMA - This ratio stretches

the High-Definition 16:9 aspect image to

eliminate the black side bars.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

Aspect Ratios (Continued)

Press the ASPECT button

• By pressing the ASPECT button, you can change the size.

When you change the aspect ratios, it is different from their broadcast or recorded program.

NTSC, 480i, 480p

HD (1080i, 720p)

ASPECT

HD PANORAMA

CINEMA ZOOM

FULL

ASPECT

PANORAMA

CINEMA

FULL

REGULAR

Notes:

• You can also choose the size by pressing the π† buttons.

• When you change the aspect ratio or signal, reset the picture position to center.

• You can also access the FRONT PANEL CONTROL screen by using the MENU button on

the side of the TV instead of the remote control. It appears between INITIAL SETUP and

PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose

ASPECT by pressing Menu

†

on the side panel and choose a mode by using the CHANNEL

+/- buttons (

√

OPERATE

The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate

the onscreen menu system.

• See individual topics like “Sound Adjust” for specific information on using menus.

This button confirms your selection when you are in one of the onscreen menus.

Back

This button allows you to go back in the menu to change a selection or correct a mistake.

Download from Www.Somanuals.com. All Manuals Search And Download.

Button Functions

TV/CATV Slide Switch

Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to

operate the television’s built-in tuner. Move the switch to CATV to operate a cable box.

Note:

• See page 25 for information on programming your remote for cable box operation.

VCR/DVD Slide Switch

You can control a VCR or DVD player with the buttons on the lower part of the remote control.

Move the slide switch to VCR or DVD to operate.

Notes:

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other

manufacturer’s brand VCR, please see the code chart and instructions on page 26.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufacturer’s brand DVD player, please see the code chart and instructions on page 27.

VCR Buttons

You can use this remote control to operate the basic functions of your VCR. These functions

include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and

power off.

Move the selector switch to VCR to operate.

• The remote is preset with the code 000 to control JVC-brand VCR’s. For any other

manufacturer’s brand VCR, please see the code chart and instructions on page 26.

DVD Buttons

You can also use this remote control to operate the basic functions of your DVD player. These

functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close,

power on, and power off.

Move the selector switch to DVD to operate.

• The remote is preset with the code 000 to control JVC-brand DVD players. For any other

manufacturer’s brand DVD player, please see the code chart and instructions on page 27.

Light

All remote control buttons are illuminated, except for the TV/CATV slide switch, VCR/DVD slide

switch and LIGHT button. Press the LIGHT button to turn the illumination on for 4 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

PROBLEMS

CHECK

There is no power

• See if the power cord became unplugged.

• Check for a blown fuse or circuit breaker or a power outage.

There is no picture

or sound

• The antenna could be disconnected.

• The input mode could be set improperly. See page 57.

• The tuner (Auto Tuner Setup) could be set improperly. See page 32.

• The TV station may be having difficulties. Check to see if other stations are working.

Remote control is not • Check to see that the batteries are still working and properly installed.

operating properly or • Make sure the remote has a clear sight path to the TV.

at all

• Check that the TV/CATV switch is in the proper position.

• You may be too far from the TV. You must be within 23 feet (7 meters).

You cannot select a

certain channel

• Make sure the channels have been programmed. See "Channel Summary", page 32.

• Check to see if the channel is locked. See "Channel Summary - Lock" page 33.

The power turns off

by itself

• Make sure the set did not become unplugged.

• Perhaps the On/Off Timer is set. See page 54.

• Check to see if the Sleep Timer was set. See page 59.

The clock is wrong

• The power was interrupted and the clock was not reset. See page 53.

The color quality

is poor

• Tint and Color may be improperly adjusted. See page 49.

• The Video Status mode may be turned to the wrong setting. See page 59.

There are lines

across the picture

• There could be interference from another electrical appliance, such as a computer,

another TV or VCR. Move any such appliances further away from the TV.

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

operating nearby. Move the antenna away from the appliance or change to a coaxial

cable connection which is less prone to interference.

The picture is spotted

There are double

pictures (ghosts)

• A building or passing airplane can reflect the original signal and produce a second,

slightly delayed one. Adjust your antenna position.

Picture is snowy

(image noise)

• Your antenna may be damaged, disconnected or turned. Check the antenna

connection. If the antenna is damaged, replace it.

Screen is 40% black

• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 60.

• Make sure the MTS settings are correct. See "MTS" on page 52.

Stereo or bilingual

programs can't be

heard

There is no sound

from the TV's

speaker

• The Center CH Input may be turned on. See page 47.

Static electricity

• It is normal to feel static electricity if you brush or touch the screen.

You hear occasional

crackling sounds

• It is normal for the TV to make crackling sounds when first turned on or off. Unless

the sound or picture become abnormal, this is fine.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

MODEL

AV-30W585

AV-30W575

Reception

Format

NTSC, BTSC System (Multi-Channel Sound)

VHF 2 to 13, UHF 14 to 69

Sub Mid, Mid, Super, Hyper and Ultra bands

(181 channel frequency synthesizer system)

Reception

Range

Power Source

AC 120V, 60Hz

215W

Power

Consumption

Screen Size

30 inch / 80 cm

measured diagonally

16:9 Ratio

Audio Output

Speakers

10W + 10W

2 1/2 x 5 inch / 6.5 x 13 cm oval x 2

75 ohms (VHF/UHF) (F-type connector)

Antenna

Terminal

External Input

Jacks

Video: 1 Vp-p, 75 ohms

Audio: 500mVrms (-4dBs) high impediance

S-Video Input

Jack

Y: 1Vp-p positive, 75 ohms (negative sync provided)

C: 0.286 Vp-p (burst signal), 75 ohms

Component

Input Jacks

Y: 1Vp-p positive, 75 ohms (negative sync provided)

PB/PR: 0.7 Vp-p, 75 ohms

Audio Output

Jacks

(VARI/FIX)

VARI: More than 0 to 1000mVrms (+2.2dBs)

FIX 500 mVrms (-4dBs) Low impedance

(400 Hz when modulated 100%)

More than 0 to 1000mVrms (+2.2 dBs)

Low impedance (100 Hz when modulated 100%)

Subwoofer

Output Jack

AV Compu Link

III Jack

3.5 mm mini jack x 1

HDMI jack x 1

Digital–In

Note: The Digital–In terminal is not compatible with picture signals of a

personal computer

Dimensions (In)

WxHxD (cm)

33 1/8 x 23 5/8 x 21 7/8

84.2 x 59.9 x 55.5

Weight (lbs / kg)

Accessories

118.8 / 54

Remote control unit x 1 / AA batteries x 2

Specifications subject to change without notice.

Note:

• Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers) is not

recommended for your TV set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Download from Www.Somanuals.com. All Manuals Search And Download.

JVC COMPANY OF AMERICA

Division of JVC Americas Corp.

1700 Valley Road

JVC CANADA, INC.

21 Finchdene Square

Scarborough, Ontario

Canada, M1X 1A7

Wayne, New Jersey, 07470

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Double Oven FIMU 23 BK User Manual
Insignia DVD Player NS D9500 User Manual
Intermec Time Clock PF2i User Manual
JAMO Speaker 660A2 User Manual
JVC Camcorder DVL820 User Manual
JVC Stereo System UX LP5 User Manual
Kenmore Range 7907131 User Manual
Kennedy Welding System HAS413 User Manual
KitchenAid Microwave Oven KOMV1554R User Manual
Klipsch Speaker CA 800TSW User Manual