JVC CRT Television 50052496 User Manual

ENGLISH  
POLSKI  
AV-20RM4SE  
AV-21RM4SE  
ÈESKY  
MAGYAR  
ÁÚËÃAPCKÈ  
ROMANIAN  
VICTOR COMPANY OF JAPAN, LIMITED  
COLOUR TELEVISION  
INSTRUCTIONS  
KOLOROWY ODBIORNIK TELEWIZYJNY  
BAREVNY TELEVIZOR  
INSTRUKCJA OBSLUGI  
PØ ÍRUÈKA K OBSLUZE  
HASZNÁLATI UTASÍTÁSA  
PÚKOBOÄCTBO ÇA PAÁOTA  
INSTRUCÞIUNI  
SZÍNES TELEVÍZIÓ  
ÖBETEH TEËEBÈÇOP  
TELEVIZOR COLOR  
50052496  
©2004 VICTOR COMPANY OF JAPAN, LIMITED  
0504-JVC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Safety Precautions  
1. Power Source  
Safety Precautions .................................................. 1  
Remote Control Buttons......................................... 2  
The receiver should be operated only from a 220-240V AC,  
50 Hz. outlet. Ensure you select the correct voltage setting  
Control Panel Buttons ............................................ 3 for your convenience.  
Antenna Connections ............................................. 3 2. Power Cord  
Preparation .............................................................. 4 The power supply cord should be placed so that they are not  
likely to be walked on or pinched by items placed upon them  
or against them. Pay particular attention to cord where they  
enter the plug, power outlet, and the point where they exit  
Features........................................................................... 4  
Before Switching on your TV ................................. 4  
Power connection............................................................. 4  
Aerial Connections ........................................................... 4  
How to connect the external equipments .......................... 4  
Inserting batteries in the remote control handset ............... 4  
from the receiver.  
3. Moisture and Water  
Do not use this equipment in a humid and damp place (avoid  
the bathroom, the sink in the kitchen, and near the washing  
machine). Do not expose this equipment to rain or water and  
do not place objects filled with liquids on it as this may be  
dangerous.  
Switching the TV ON/OFF....................................... 4  
To switch the TV on .......................................................... 4  
To switch the TV off .......................................................... 4  
Initial Settings.......................................................... 4  
4. Cleaning  
Operating with the onset buttons ...................................... 5  
Operating with Remote Control ......................................... 5  
Before cleaning, unplug the receiver from the main supply  
outlet. Do not use liquid or aerosol cleaners. Use with soft  
and dry cloth.  
Menu System ........................................................... 5  
Picture Menu.................................................................... 5  
Feature Menu ................................................................... 6  
Install. Menu .................................................................... 7  
Program. (Programming) Menu ......................................... 7  
5. Ventilation  
The slots and openings on the receiver are intended for venti-  
lation and to ensure reliable operation. To prevent overheating,  
these openings must not be blocked or covered in anyway.  
Other Features ........................................................ 8  
Sound Mute...................................................................... 8  
Information on Screen....................................................... 8  
To Display the Time .......................................................... 8  
Standard........................................................................... 8  
VCR Control Buttons ........................................................ 8  
6. Lightning  
In case of storm and lightning or when going on holiday, dis-  
connect the power cord from the wall outlet.  
7. Replacement Part  
Teletext .................................................................... 9  
When replacement parts are required, be sure the service  
technician has used replacement parts which are specified  
by the manufacturer or have the same specifications as the  
original one. Unauthorized substitutions may result in fire,  
electrical shock, or other hazards.  
To operate Teletext ........................................................... 9  
To select a page of Teletext .............................................. 9  
To Select Index Page ....................................................... 9  
Searching for a teletext page while watching TV ............... 9  
To Select Double Height Text ............................................ 9  
To Reveal “concealed” Information ..................................... 9 8. Servicing  
To StopAutomatic Page Change ...................................... 9  
To Select a Subcode Page ............................................... 9  
To exit Teletext ................................................................. 9  
Please refer all servicing to qualified personnel. Do not re-  
move cover as this may result in electric shock.  
9. Flame sources  
Do not place naked flame sources on the apparatus.  
Connect the External Equipments....................... 10  
Via the Euroconnector .................................................... 11  
AV-1 S Mode .................................................................. 11  
Via the RCA jacks .......................................................... 11  
Via the ANT (aerial) socket ............................................. 11  
TV and Video Recoder (VCR) ......................................... 11  
10. Stand-By  
Do not leave your TV stand-by or operating condition when you  
leave your house.  
NTSC Playback.............................................................. 11 Warning!  
Connecting Headphones................................................. 11  
Any intervention contrary to regulations, in particular, any  
modification of high voltage or a replacement of the picture  
tube may lead to an increased concentration of x-rays. Any  
television modified in this way no longer complies with license  
and must not be operated.  
Tips......................................................................... 11  
Specifications ........................................................ 12  
Instructions for waste disposal:  
Packaging and packaging aids are recyclable and should  
principally be recycled. Packaging materials, such as foil  
bag, must be kept away from children.  
ENGLISH - 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Buttons  
= Stand By / Power  
0 - 9 = Direct Program  
Standard Button (PICTURE default settings)  
Colour Buttons  
MENU = Menu Button  
(
) = Cursor Up / Programme Up  
) = Cursor Right / Volume +  
(
Teletext Control Buttons  
VCR Control Buttons  
(
) = Cursor Down / Programme Down  
) = Cursor Left / Volume -  
(
AV = AV Button  
= Information Button  
= Mute  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of  
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk  
of electric shock of persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature accompanying the appliance.  
ENGLISH - 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel Buttons  
P/CH  
MENU  
POWER  
Headphone  
FRONT AV  
P/CH  
MENU  
POWER  
Audio Input  
Terminal  
Power  
- Program +  
Menu  
Video Input  
Terminal  
- Volume +  
Antenna Connections  
ENGLISH - 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Remove batteries from remote control handset when it is  
not to be used for a long period. Otherwise it can be damaged  
due to any leakage of batteries.  
Preparation  
Place TV on a solid surface.  
For ventilation, leave a space of at least 10 cm free all around  
the set. To prevent any fault and unsafe situations, please do  
not place any objects on top of the set.  
Switching the TV ON/OFF  
You can operate your TV either using the remote control  
handset or directly using the TV onset buttons.  
Features  
To switch the TV on  
• It is a remote controlled colour television.  
Your TV will switch on in two steps:  
• 100 programmes from VHF, UHF bands or cable channels  
can be preset.  
1- Press the power button located on the front of the TV. Then  
the TV switches itself to standby mode and the RED LED  
located below the TV turns on.  
2- To switch on the TV from stand-by mode either:  
Press a digit button on the remote control so that a program-  
me number is selected,  
• It can tune cable channels.  
• Controlling the TV is very easy by its menu driven system.  
• It has an Euroconnector socket for external devices (such  
as video recorder, video games, audio set, etc.)  
• Front AV Input available.  
or,  
Teletext.  
Press Standby / Power Button or Programme Up and Down  
buttons on the front of the TV or on the remote control re-  
spectively, so the TV will switch on and the RED Led will turn  
GREEN.  
• It is possible to connect headphone.  
• Direct channel access.  
• APS (Automatic Programming System).  
• All programmes can be named.  
• Forward or backward automatic tuning.  
• Sleep timer.  
To switch the TV off  
• Press the stand-by button on the remote control, so the TV  
will switch to stand-by mode and the GREEN LED will be-  
come RED, or,  
• Automatic sound mute when no transmission.  
• Press the power button located on the front of the TV.  
• 5 minutes after the broadcasting (closedown), the TV  
switches itself automatically to stand-by mode.  
Initial Settings  
Before Switching on your TV  
The message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" will be displayed when you turn  
on your TV for the first time.  
Power connection  
1- Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
2- Select COUNTRY with the “ “ or “ ” button, then  
press the “ ” or “ ” button to select the country you are  
now located.  
“ or “  
” button, then  
Important: The TV set is designed to operate on 220-240 V  
AC, 50 Hz.  
• After unpacking, allow the TV set to reach the ambient room  
temperature before you connect the set to the mains.  
Aerial Connections  
3- Select START with the “  
“ or “  
” button, then press  
• Connect the aerial plug to the aerial input socket located at  
the back of the TV.  
the “ ” button to start APS.  
APS (Automatic Programming System) automatically pro-  
grammes the received channels in your TV’s programme  
numbers. During APS, "A. P. S. IS RUNNING" will be dis-  
played. After APS is finalized, the “PROGRAM.” menu ap-  
pears.  
How to connect the external equipments  
See “Connect the External Equipments” on page 10.  
• See the instruction manuals provided with the external de-  
vices too.  
To cancel APS, press the “ ” button.  
You can delete a channel, insert a channel into a programme  
number, or re-start APS with the PROGRAM.” menu.  
Inserting batteries in the remote control handset  
• Remove the battery cover located on the back of the hand-  
set by gently pulling upwards from the indicated part.  
For details, see “Program. (Programming) Menu” on page  
7.  
• Insert two AA (R6) or equivalent type batteries inside.  
4- Press the "STANDARD" button to complete the initial set-  
tings.  
• Replace the battery cover.  
After the initial settings are complete, you can change a pro-  
gramme number or to name a programme number or to pro-  
gramme new channel manually. For details, see  
Install. Menu” on page 7.  
If the message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" does not appear, follow the de-  
scription “Program. (Programming) Menu” on page 7 to  
select a menu language and the country where you are now  
located, and to use A.P.S..  
ENGLISH - 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme Selecting (direct access):  
Press digit buttons on the remote control handset to select  
programmes between 0 and 9. TV will switch to the selected  
program after a short delay.  
When you press first digit, second digit will be displayed with  
‘-’ symbol for 3 seconds. To select programmes between 10  
and 99 press corresponding digit buttons consecutively be-  
fore ‘-’ symbol on the second digit disappears. (e.g. for pro-  
gramme 27, first press 2 and then 7 while program number  
displayed as ‘2-’ )  
Menu System  
Your TV has been designed with a menu system. Display  
“MENU” (main menu) and enter one of four menus (PIC-  
TURE, FEATURE, INSTALL. and PROGRAM.).  
Operating with the onset buttons  
1- Press “MENU” button to display “MENU” (main menu).  
The menu titles will be displayed in the main menu.  
Volume setting and programme selection can be made using  
the buttons on the front panel.  
2- Press “  
“ or “  
” button to select a menu title, then  
Volume Setting  
press “ ” or “ ” button to enter the menu.  
To exit a menu, press “STANDARD” button.  
To go to the previous menu, press “MENU” button.  
• Press “-  
” button to decrease volume or “  
+” button to  
increase volume, so a volume level scale will be displayed  
on the screen.  
Picture Menu  
Programme Selecting  
To change picture settings:  
• Press “P/CH+” button to select next programme or “-P/CH”  
button to select the previous programme.  
• Press “MENU” button, now you are in main menu. In the  
main menu, select PICTURE using “  
then enter the picture menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button,  
Entering Main Menu  
• Press “MENU” button to enter main menu. In the main  
menu select submenu using “P/CH+” or “-P/CH” button and  
enter the submenu using “  
the usage of the menus, refer to “Menu System” on page  
5.  
• Enter the Picture Menu directly, pressing the GREEN but-  
ton.  
+” or “-  
” button. To learn  
Setting Brightness:  
Operating with Remote Control  
• As you enter the picture menu, BRIGHTNESS will be the  
first selected option.  
The remote control handset of your TV is designed to control  
all the functions of the model you selected. The functions will  
be described in accordance with the menu system of your  
TV.  
• Press “ ” button to increase BRIGHTNESS.  
• Press “ ” button to decrease BRIGHTNESS.  
Functions which you can use out of menu system are de-  
scribed below.  
Volume Setting  
Press “ ” button to increase volume.  
Press “ ” button to decrease volume.  
Setting Contrast:  
• Using “  
“ or “  
” button select CONTRAST.  
• Press “ ” button to increase CONTRAST level.  
• Press “ ” button to decrease CONTRAST level.  
Programme Selecting (Previous or next programme)  
• Press “  
• Press “  
” button to select the previous programme.  
“ button to select the next programme.  
Setting Colour:  
• Using “  
“ or “  
” button select COLOUR.  
• Press “ ” button to increase COLOUR level.  
ENGLISH - 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press “ ” button to decrease COLOUR level.  
Feature Menu  
• Press “MENU” button, now you are in main menu. In the  
main menu, select FEATURE, using “  
Then enter the feature menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button.  
• Enter the Feature Menu directly, pressing the YELLOW  
button.  
Sleep Timer:  
Setting Sharpness:  
• As you enter the feature menu, SLEEP TIMER will be the  
first selected option.  
• Using “  
“ or “  
” button select SHARPNESS.  
• Use “ ” or “ ” button to change the value of the sleep timer  
between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00,  
1:30:00, 1:45:00 and 2:00:00. hours. Your TV will get into  
standby mode when the period you selected passes after  
you make the selection.  
• Press “ ” button to increase SHARPNESS level.  
• Press “ ” button to decrease SHARPNESS level.  
It is displayed on the upper right of the screen. If sleep timer  
is activated it is displayed with the TV status and erased with  
it after 3 seconds.  
Setting Hue (In AV mode only) :  
• Using “  
“ or “  
” button select HUE.  
• Press “ ” button to increase HUE level.  
• Press “ ” button to decrease HUE level.  
During the last minute of the count down, the timer is dis-  
played on the upper right of the screen. When the timer  
reaches zero, TV goes to stand-by.  
HUE adjust is functional only when NTSC 3.58/4.43 is ap-  
plied in AV mode. It does not appear when other colour sys-  
tems used.  
Child Lock:  
In Feature Menu, press “  
“ or “  
” button to select  
CHILD LOCK. Using “ ” or “ ” button turn CHILD LOCK On  
or Off.  
When Off is selected, there will be no difference in the opera-  
tion of your TV. When On is selected, the TV can only be  
controlled by the remote control handset. In this case, the  
front panel buttons (except the Switch On/Off button) will not  
work.  
Mode:  
This option is used to change the picture size according to  
the coming transmission.  
• If AUTO function is selected, then the picture size will be  
automatically changed according to the transmission.  
• Selecting 4 : 3 mode forces picture ratio size to 4 : 3.  
• Selecting 16 : 9 mode forces picture ratio size to 16 : 9.  
Language:  
Every program has its own picture mode setting. When you  
store the picture mode for a program other programs keep  
their picture mode setting unaffected.  
Menu Language can be selected by pressing “ ” or “ ” button  
on LANGUAGE item.  
ENGLISH - 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B/G  
D/K  
K1  
: C02-C73 / S01-S41 / S75-S79  
: C01-C69 / S01-S41  
: C04-C09  
Install. Menu  
• Press “MENU” button, now you are in main menu. In the  
main menu, select INSTALL. using “  
then enter the Installation menu pressing “ ” or “ ” button.  
or  
“ or “  
” button,  
6. If the channel reception is poor, fine-tune the channel.  
Press “ “ or “ ” button to select FINE TUNING,then  
press “ ” or “ ” to fine-tune the channel.  
• Enter the Installation Menu directly, pressing the BLUE but-  
ton.  
7. After the all settings are completed, store the new  
channel’s setting to the programme number which you se-  
lected. Press “  
“ or “  
” button to select STORE,  
then press “ ” or “ ” to store it.  
If you want to modify the current programme number’s  
setting (for example, changing fine tuning, etc.) :  
1. Select the programme number you want to modify the  
settings while no menu appears.  
2. Display the INSTALL. menu.  
3. Follow “To programme a channel in a TV’s program-  
me number manually:” on page 7 and change the set-  
tings of the current programme number.  
To programme a channel in a TV’s programme  
number manually:  
If you want to name the new programme, follow the in-  
structions under "To change the name of a programme"  
on page 7.  
1. PROGRAMME will be the first selected item as you enter  
the INSTALL. menu. Pressing “ ” or “ ” button select the  
programme number where you want to the tuned channel  
to be stored. (You may also type the programme number  
using the digit buttons.)  
Note:  
Do not use Programme item in the INSTALL. menu to select  
the programme number. If you select the programme number  
with Programme item and store the settings, the selected  
programme number’s current settings are cancelled.  
Program. (Programming) Menu  
PROGRAM. (Programming) menu is used to display the  
programme names and numbers. You can use this menu to  
delete a channel, to insert a channel and to autostore the  
programmes.  
Select the PROGRAM. menu pressing “  
“ or “  
” but-  
2. Press “  
“ or “  
” button to select BAND. Using “ ” or  
ton and open it pressing “ ” or “ ” button. When you enter the  
programme menu, all the programme numbers and names  
will be displayed on the screen. The programme number and  
name of the tuned channel will be shown by the cyan color.  
All the other channel numbers will be white. You can move  
“ ” button to select the band in which you want to search a  
channel.  
3. Press “  
“ or “  
”button to select SEARCH. Press “ ”  
or “ ” button to start searching. (Press “ ” button to search  
forward.Press “ ” button to search backwards.)  
the number in cyan using “  
“ or “  
” or “ ” or “ ” button.  
Also, it's possible to use digit buttons to select programme  
numbers. As you pass through the programme numbers this  
way, to reach the programme number you want, the channels  
corresponding to the programme numbers you pass through  
will be tuned and the selected programme number will be  
shown in cyan.  
If the found channel is not the desired one, press “ ” or “ ”  
button to start searching again.  
To stop searching before a channel is found, press the re-  
verse direction button. For example, when the TV is search-  
ing forward with “ ” button, press “ ” button to stop searching.  
If you know the channel number which you want to find, you  
can find the channel directly.  
Press “  
“ or “  
” button to select CHANNEL, then press  
“ ” or “ ” button to select the channel number, or enter the  
number with the digit buttons.  
(Follow the step 5 to select the correct standard before you  
select a channel number.)  
4. If you want to name the new programme, follow the instruc-  
tions under "To change the name of a programme" on  
page 7.  
5. If the sound or picture is abnormal, change the standard  
(broadcasting system) of new channel.  
Press “  
“ or “  
” button to select STANDARD, then  
To change the name of a programme:  
press “ ” or “ ” button to change the correct one.  
• Move to the channel you want to rename or use the digits  
so that the selected programme number is in cyan color.  
The indicated channel number will be changed when you  
change the standard.  
ENGLISH - 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press the RED button. Use “ ” or “ ” button to select the  
position and press “ “ or “ ” button to select a letter.  
Other Features  
Now, press the RED button again to store or BLUE button to  
cancel NAME.  
Sound Mute  
To cut off the sound of the TV, press “ ” button. The sound  
To delete a channel from a programme number:  
willbecutoff.Tocancelmute,press” or “ ” or “ ” but-  
ton. The volume level will be the same as the level before  
mute when you cancel mute.  
• Move to the channel you want to delete or use the digits so  
that the selected programme number is in cyan color.  
• Press the YELLOW button. Now the corresponding channel  
will be deleted and all the other channels below this pro-  
gramme number will be moved one programme number up.  
Information on Screen  
First pressing the “ ” button displays the current status  
Programme number” and “Station name”.  
Now, press the YELLOW button again to delete orBLUE but-  
ton to cancel DELETE.  
Pressing this button again displays the current time.  
To insert a channel into a programme number:  
Pressing this button once more remove the on-screen dis-  
play.  
• Move to the channel to be inserted or use the digits so that  
the selected programme number is in cyan color.  
• Press the GREEN button. Now using “  
“ or “  
” or “ ”  
or “ ” buttons, move to the programme number.  
Now, press the GREEN button again to insert orBLUE button  
to cancel INSERT.  
A.P.S.  
If you enter the A.P.S. menu, you can automatically program-  
me the received channels in your TV’s programmes with  
A.P.S. ( Automatic programme system ).  
To Display the Time  
1. After displaying the PROGRAM. menu, press the BLUE  
button to enter the A.P.S. menu.  
• While watching a TV programme with Teletext transmission  
press “ “ button twice. The current time information, cap-  
tured from Teletext will be displayed on the screen.  
2. Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
3. Select COUNTRY with the “ “ or “ ” button, then  
“ or “  
” button, then  
• If the programme being watched does not have Teletext  
transmission, only a box will be displayed at the same loca-  
tion.  
press the “ ” or “ ” button to select the country you are  
now located.  
• The time information will disappear after pressing “ “ but-  
ton again.  
4. If you want to start programming, select START with the  
“ or “  
” button, then press the “ ” button. The  
message “A.P.S. IS RUNNING” appears and A.P.S. auto-  
matically programmes the received channels in your TV’s  
programme numbers. Afrer A.P.S. is finalized, the PRO-  
GRAM. menu appears again.  
When time information is displayed on screen, entering an-  
other menu will remove it.  
Standard  
To cancel A.P.S., press the “ ” button.  
You can re-set the current PICTURE menu settings (except  
Picture Mode setting) to the default settings.  
• Press “STANDARD” button when no menu appears.  
VCR Control Buttons  
The buttons can be used to operate a JVC brand VCR.  
Pressing the button having the same appearance as the origi-  
nal remote control button of a device makes the function work  
in the same way as the original remote control.  
Press the VCR Control Button to control your VCR.  
Note:  
• If your device is not made by JVC, these buttons cannot be  
used.  
• Even if your device is made by JVC, some of these buttons  
or any one of the buttons may not work, depending on the  
device.  
You can use the  
/
buttons to choose a TV channel  
which the VCR will receive.  
ENGLISH - 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Select Double Height Text  
Teletext  
• Press “ “ button for the top half of the information page to  
be displayed in double height text.  
Teletext is an information system that displays text on your  
TV screen. Using the Teletext information system you can  
view a page of information on a subject that is available in the  
list of contents (index).  
• Press “ “ button again for the bottom half of the informa-  
tion page to be displayed in double height text.  
No on screen display will be available in text mode.  
• Press “ “ button once more for the full page of normal  
height text.  
No contrast, brightness or colour control, but volume control  
is available in text mode.  
To Reveal “concealed” Information  
To operate Teletext  
• Pressing “ “ button once will reveal answers on a quiz or  
games page.  
• Select a TV station on which Teletext is being transmitted.  
• Press (TELETEXT) “ ” button. Usually the list of contents  
(index) is displayed on the screen.  
• Pressing “ “ button again will conceal the revealed an-  
swers.  
To Stop Automatic Page Change  
The teletext page you have selected may contain more infor-  
mation than what is on the screen; the rest of the information  
will be displayed after a period of time.  
• Press “ “ button to stop the automatic page change.  
• Press “ “ button again to allow the next page to be dis-  
played.  
To Select a Subcode Page  
To select a page of Teletext  
Subcode pages are subsections of long Teletext pages that  
can only be displayed on the screen one section at a time.  
• Press the appropriate digit buttons for the required Teletext  
page number.  
• Select the required Teletext page.  
• Press “ “ button.  
The selected page number is displayed at the top left corner  
of the screen. The Teletext page counter searches until the  
selected page number is located, so that the desired page is  
displayed on the screen.  
• Select the required subcode page number by pressing four  
digit buttons (e.g. 0001).  
• If the selected subcode page is not displayed in a short  
time, press “ “ button. TV programme will be displayed on  
the screen.  
• Press “  
“ button to move the Teletext screen forward  
one page at a time.  
• Press “  
” button to move the Teletext screen backward  
Teletext page number will be displayed on the upper left cor-  
ner of the screen when the selected page is found.  
one page at a time.  
• Press “ “ button to display the selected Teletext page.  
To exit Teletext  
• Press “ ” button. The screen will switch to TV mode.  
To Select Index Page  
To select the page number of the index (generally page  
100), press “ “ button.  
Searching for a teletext page while watching TV  
• In the Teletext mode pressing “ “ button will switch the  
screen to the TV mode. In the TV mode enter a page num-  
ber using digit keys. As you enter last digit of page number,  
” sign will replace the page number and flash until the  
entered page number is found. Then the page number will  
replace “ ” sign again. Now you can display this teletext  
page pressing “ “ button.  
ENGLISH - 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the External Equipments  
Before connecting anything  
• Switch off all equipments including the TV.  
• Read the manuals provided with the equipments.  
To select an AV mode  
Pressing “AV” button on the remote control selects one of the three AV modes(AV- 1, AV-1 S and F-AV).  
To return to the TV mode, repeatedly press AV” button or press “  
AV-1 (EXT.I) terminal: Euroconnector (21-pin, SCART)  
• Video input, Audio input and RGB inputs are available.  
• TV broadcast outputs (Video and Audio) are available.  
AV-1 S (EXT.I) terminal: Euroconnector (21-pin, SCART)  
• Video input, S-VIDEO (Y/C) input and Audio input are available.  
• Video and Audio outputs are available.  
“ or “  
” button.  
F-AV (Front AV) terminal: RCA connectors x 2  
• Video input and Audio input are available.  
FRONT AV  
F-AV  
ENGLISH - 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Via the Euroconnector  
Tips  
Your TV set has an Euroconnector socket. If you want to  
connect equipments (e.g. video recorder, decoder, etc.) which  
have Euroconnectors, to your TV, use the AV-1 (EXT.I) or  
AV-1 S (EXT.I) terminals.  
Care of the Screen:  
Clean the screen with a slightly damp, soft cloth. Do not use  
abrasive solvents as they may damage the TV screen coating  
layer.  
AV-1 S Mode  
Poor Picture:  
If the equipment connected to your TV set supports S-Video  
(Y/C) output from Euroconnector, you can have a better pic-  
ture quality by selecting AV-1 S mode and connecting your  
equipment to the AV-1 S (EXT.I) terminal of TV. See your  
equipment's booklet to check if your equipment has such fea-  
ture.  
Have you selected the correct TV system? Is your TV set or  
house aerial located too close to the loudspeakers, non-  
earthed audio equipment or neon lights, etc. ?  
Mountains or high buildings can cause double pictures or  
ghost images. Sometimes you can improve the picture quali-  
ty by changing the direction of the aerial.  
The picture quality may degrade when two peripherals are  
connected to the TV at the same time. In such a case, dis-  
connect one of the peripherals.  
Via the RCA jacks  
If you have an equipment (such as a Camcorder) which has  
the RCA jacks, connect it to the F-AV (Front AV) terminal  
with the video and audio cables.  
No Picture:  
Via the ANT (aerial) socket  
Is the aerial connected properly? Are the plugs connected  
tightly to the aerial socket? Is the aerial cable damaged? Are  
suitable plugs used to connect the aerial? If you are in doubt,  
consult your dealer.  
No Picture means that your TV is not receiving any trans-  
mission. Have you pressed the correct keys on the remote  
control? Try once more.  
If your equipment does not have an Euroconnecter or RCA  
jacks, connect it to the TV with an aerial cable. For details,  
see the manual provided with the equipment.  
To store the test signal that comes from the equipment, see  
"Install. Menu" on page 7 and store it to the programme  
number 0. You can watch images from that equipment to  
select the programme number which you stored the test  
signal.  
Remote Control:  
Your TV no longer responds to the remote control. Press the  
STANDARD” button on the remote control once more. Per-  
haps the batteries are exhausted. If so you can still use the  
local buttons at the front of your TV.  
Have you selected the wrong menu? Press STANDARD” but-  
ton to return to TV mode or press “MENU” button to return to  
the previous menu.  
TV and Video Recoder (VCR)  
• Connect the Video Recorder to the ANT (antenna input)  
socket of the TV with the aerial cable.  
• Connect the Video Recorder to the AV-1 or AV-1 S terminal  
with the SCART cable, or connect it to the F-AV (Front AV)  
terminal with the audio and video cables.  
No solution:  
NTSC Playback  
Switch your TV set off and on. If this does not work, call the  
service personnel; never attempt to repair it yourself.  
Connect a NTSC video recorder to a terminal. Then press  
AV“ button to select the corresponding AV mode.  
NTSC 3.58/4.43 system is detected automatically in AV  
mode.  
Connecting Headphones  
Use the headphone socket of your TV, to connect head-  
phones.  
ENGLISH - 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
TV BROADCASTING........................................... PAL SECAM B/G D/K K1  
RECEIVING CHANNELS .....................................VHF (BAND I/III)  
UHF (BAND U)  
HYPERBAND  
CABLE TV (B/G : S01-S41 / S75-S79 ; D/K: S01-S41)  
NUMBER OF PRESET CHANNELS ....................100  
CHANNEL INDICATOR ........................................On Screen Display  
RF AERIAL INPUT...............................................75 Ohm (unbalanced)  
OPERATING VOLTAGE....................................... 220-240V AC, 50 Hz.  
SOUND-MULTIPLEX SYSTEMS ..........................Mono  
AUDIO OUTPUT POWER  
(WRMS.) (%1 THD) ....................................5,5  
POWER CONSUMPTION (W) (max.) ..................85  
PICTURE TUBE .................................................. 20”  
21”  
DIMENSIONS (mm).................................... AV-20RM4SE  
D........................................................................ 490  
L ........................................................................ 606  
H........................................................................ 475  
Weight (Kg.) ........................................................18  
AV-21RM4SE  
470  
606  
475  
21  
ENGLISH - 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Safety Precautions  
1. Power Source  
Safety Precautions ...................................................1  
Remote Control Buttons ..........................................2  
Control Panel Buttons..............................................3  
The receiver should be operated only from a 220-240V AC,  
50 Hz. outlet. Ensure you select the correct voltage setting  
for your convenience.  
Antenna Connections ...............................................3 2. Power Cord  
Preparation................................................................4 The power supply cord should be placed so that they are not  
likely to be walked on or pinched by items placed upon them  
Features .......................................................................... 4  
or against them. Pay particular attention to cord where they  
Before Switching on your TV..................................4  
enter the plug, power outlet, and the point where they exit  
Power connection............................................................. 4  
Aerial Connections ........................................................... 4  
How to connect the external equipments.......................... 4  
Inserting batteries in the remote control handset .............. 4  
from the receiver.  
3. Moisture and Water  
Do not use this equipment in a humid and damp place (avoid  
the bathroom, the sink in the kitchen, and near the washing  
machine). Do not expose this equipment to rain or water and  
do not place objects filled with liquids on it as this may be  
dangerous.  
Switching the TV ON/OFF ........................................4  
To switch the TV on.......................................................... 4  
To switch the TV off .......................................................... 4  
Initial Settings ...........................................................4  
Operating with the onset buttons ...................................... 5  
Operating with Remote Control......................................... 5  
4. Cleaning  
Before cleaning, unplug the receiver from the main supply  
outlet. Do not use liquid or aerosol cleaners. Use with soft  
and dry cloth.  
Menu System .............................................................5  
Picture Menu ................................................................... 5  
Feature Menu ................................................................... 6  
Install. Menu .................................................................... 7  
Program. (Programming) Menu ........................................ 7  
5. Ventilation  
The slots and openings on the receiver are intended for venti-  
lation and to ensure reliable operation. To prevent overheating,  
these openings must not be blocked or covered in anyway.  
Other Features..........................................................8  
Sound Mute ..................................................................... 8  
Information on Screen ...................................................... 8  
To Display the Time.......................................................... 8  
Standard .......................................................................... 8  
VCR Control Buttons........................................................ 8  
6. Lightning  
In case of storm and lightning or when going on holiday, dis-  
connect the power cord from the wall outlet.  
7. Replacement Part  
Teletext ......................................................................9  
When replacement parts are required, be sure the service  
technician has used replacement parts which are specified  
by the manufacturer or have the same specifications as the  
original one. Unauthorized substitutions may result in fire,  
electrical shock, or other hazards.  
To operate Teletext ........................................................... 9  
To select a page of Teletext .............................................. 9  
To Select Index Page ....................................................... 9  
Searching for a teletext page while watching TV............... 9  
To Select Double Height Text ........................................... 9  
To Reveal “concealed” Information .................................... 9 8. Servicing  
To StopAutomatic Page Change ...................................... 9  
To Select a Subcode Page ............................................... 9  
To exit Teletext ................................................................. 9  
Please refer all servicing to qualified personnel. Do not re-  
move cover as this may result in electric shock.  
9. Flame sources  
Do not place naked flame sources on the apparatus.  
Connect the External Equipments........................10  
Via the Euroconnector..................................................... 11  
AV-1 S Mode ................................................................... 11  
Via the RCA jacks........................................................... 11  
Via the ANT (aerial) socket.............................................. 11  
TV and Video Recoder (VCR) .......................................... 11  
10. Stand-By  
Do not leave your TV stand-by or operating condition when you  
leave your house.  
NTSC Playback .............................................................. 11 Warning!  
Connecting Headphones ................................................. 11  
Any intervention contrary to regulations, in particular, any  
modification of high voltage or a replacement of the picture  
tube may lead to an increased concentration of x-rays. Any  
television modified in this way no longer complies with license  
and must not be operated.  
Tips........................................................................... 11  
Specifications..........................................................12  
Instructions for waste disposal:  
Packaging and packaging aids are recyclable and should  
principally be recycled. Packaging materials, such as foil  
bag, must be kept away from children.  
ENGLISH - 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Buttons  
= Stand By / Power  
0 - 9 = Direct Program  
Standard Button (PICTURE default settings)  
Colour Buttons  
MENU = Menu Button  
(
) = Cursor Up / Programme Up  
) = Cursor Right / Volume +  
(
Teletext Control Buttons  
VCR Control Buttons  
(
) = Cursor Down / Programme Down  
) = Cursor Left / Volume -  
(
AV = AV Button  
= Information Button  
= Mute  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of  
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk  
of electric shock of persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature accompanying the appliance.  
ENGLISH - 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel Buttons  
)5217ꢀ$9  
Antenna Connections  
ENGLISH - 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Remove batteries from remote control handset when it is  
not to be used for a long period. Otherwise it can be damaged  
due to any leakage of batteries.  
Preparation  
Place TV on a solid surface.  
For ventilation, leave a space of at least 10 cm free all around  
the set. To prevent any fault and unsafe situations, please do  
not place any objects on top of the set.  
Switching the TV ON/OFF  
You can operate your TV either using the remote control  
handset or directly using the TV onset buttons.  
Features  
To switch the TV on  
• It is a remote controlled colour television.  
Your TV will switch on in two steps:  
• 100 programmes from VHF, UHF bands or cable channels  
can be preset.  
1- Press the power button located on the front of the TV. Then  
the TV switches itself to standby mode and the RED LED  
located below the TV turns on.  
2- To switch on the TV from stand-by mode either:  
Press a digit button on the remote control so that a program-  
me number is selected,  
• It can tune cable channels.  
• Controlling the TV is very easy by its menu driven system.  
• It has an Euroconnector socket for external devices (such  
as video recorder, video games, audio set, etc.)  
• Front AV Input available.  
or,  
Teletext.  
Press Standby / Power Button or Programme Up and Down  
buttons on the front of the TV or on the remote control re-  
spectively, so the TV will switch on and the RED Led will turn  
GREEN.  
• It is possible to connect headphone.  
• Direct channel access.  
• APS (Automatic Programming System).  
• All programmes can be named.  
• Forward or backward automatic tuning.  
• Sleep timer.  
To switch the TV off  
• Press the stand-by button on the remote control, so the TV  
will switch to stand-by mode and the GREEN LED will be-  
come RED, or,  
• Automatic sound mute when no transmission.  
• Press the power button located on the front of the TV.  
• 5 minutes after the broadcasting (closedown), the TV  
switches itself automatically to stand-by mode.  
Initial Settings  
The message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" will be displayed when you turn  
on your TV for the first time.  
Before Switching on your TV  
Power connection  
1- Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
2- Select COUNTRY with the “ “ or “ ” button, then  
press the “ ” or “ ” button to select the country you are  
now located.  
“ or “  
” button, then  
Important: The TV set is designed to operate on 220-240 V  
AC, 50 Hz.  
• After unpacking, allow the TV set to reach the ambient room  
temperature before you connect the set to the mains.  
Aerial Connections  
3- Select START with the “  
“ or “  
” button, then press  
• Connect the aerial plug to the aerial input socket located at  
the back of the TV.  
the “ ” button to start APS.  
APS (Automatic Programming System) automatically pro-  
grammes the received channels in your TV’s programme  
numbers. During APS, "A. P. S. IS RUNNING" will be dis-  
played. After APS is finalized, the “PROGRAM.” menu ap-  
pears.  
How to connect the external equipments  
See “Connect the External Equipments” on page 10.  
• See the instruction manuals provided with the external de-  
vices too.  
To cancel APS, press the “ ” button.  
You can delete a channel, insert a channel into a programme  
number, or re-start APS with the “PROGRAM.” menu.  
Inserting batteries in the remote control handset  
• Remove the battery cover located on the back of the hand-  
set by gently pulling upwards from the indicated part.  
For details, see “Program. (Programming) Menu” on page  
7.  
• Insert two AA (R6) or equivalent type batteries inside.  
4- Press the "STANDARD" button to complete the initial set-  
tings.  
• Replace the battery cover.  
After the initial settings are complete, you can change a pro-  
gramme number or to name a programme number or to pro-  
gramme new channel manually. For details, see  
Install. Menu” on page 7.  
If the message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" does not appear, follow the de-  
scription “Program. (Programming) Menu” on page 7 to  
select a menu language and the country where you are now  
located, and to use A.P.S..  
ENGLISH - 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme Selecting (direct access):  
Press digit buttons on the remote control handset to select  
programmes between 0 and 9. TV will switch to the selected  
program after a short delay.  
When you press first digit, second digit will be displayed with  
‘-’ symbol for 3 seconds. To select programmes between 10  
and 99 press corresponding digit buttons consecutively be-  
fore ‘-’ symbol on the second digit disappears. (e.g. for pro-  
gramme 27, first press 2 and then 7 while program number  
displayed as ‘2-’ )  
Menu System  
Your TV has been designed with a menu system. Display  
“MENU” (main menu) and enter one of four menus (PIC-  
TURE, FEATURE, INSTALL. and PROGRAM.).  
Operating with the onset buttons  
1- Press “MENU” button to display “MENU” (main menu).  
The menu titles will be displayed in the main menu.  
Volume setting and programme selection can be made using  
the buttons on the front panel.  
2- Press “  
“ or “  
” button to select a menu title, then  
Volume Setting  
press “ ” or “ ” button to enter the menu.  
To exit a menu, press “STANDARD” button.  
To go to the previous menu, press “MENU” button.  
• Press “-  
” button to decrease volume or “  
+” button to  
increase volume, so a volume level scale will be displayed  
on the screen.  
Picture Menu  
Programme Selecting  
To change picture settings:  
• Press “P/CH+” button to select next programme or “-P/CH”  
button to select the previous programme.  
• Press “MENU” button, now you are in main menu. In the  
main menu, select PICTURE using “  
then enter the picture menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button,  
Entering Main Menu  
• Press “MENU” button to enter main menu. In the main  
menu select submenu using “P/CH+” or “-P/CH” button and  
enter the submenu using “  
the usage of the menus, refer to “Menu System” on page  
5.  
• Enter the Picture Menu directly, pressing the GREEN but-  
ton.  
+” or “-  
” button. To learn  
Setting Brightness:  
Operating with Remote Control  
• As you enter the picture menu, BRIGHTNESS will be the  
first selected option.  
The remote control handset of your TV is designed to control  
all the functions of the model you selected. The functions will  
be described in accordance with the menu system of your  
TV.  
• Press “ ” button to increase BRIGHTNESS.  
• Press “ ” button to decrease BRIGHTNESS.  
Functions which you can use out of menu system are de-  
scribed below.  
Volume Setting  
Press “ ” button to increase volume.  
Press “ ” button to decrease volume.  
Setting Contrast:  
• Using “  
“ or “  
” button select CONTRAST.  
• Press “ ” button to increase CONTRAST level.  
• Press “ ” button to decrease CONTRAST level.  
Programme Selecting (Previous or next programme)  
• Press “  
• Press “  
” button to select the previous programme.  
“ button to select the next programme.  
Setting Colour:  
• Using “  
“ or “  
” button select COLOUR.  
• Press “ ” button to increase COLOUR level.  
ENGLISH - 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press “ ” button to decrease COLOUR level.  
Feature Menu  
• Press “MENU” button, now you are in main menu. In the  
main menu, select FEATURE, using “  
Then enter the feature menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button.  
• Enter the Feature Menu directly, pressing the YELLOW  
button.  
Sleep Timer:  
Setting Sharpness:  
• As you enter the feature menu, SLEEP TIMER will be the  
first selected option.  
• Using “  
“ or “  
” button select SHARPNESS.  
• Use “ ” or “ ” button to change the value of the sleep timer  
between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00,  
1:30:00, 1:45:00 and 2:00:00. hours. Your TV will get into  
standby mode when the period you selected passes after  
you make the selection.  
• Press “ ” button to increase SHARPNESS level.  
• Press “ ” button to decrease SHARPNESS level.  
It is displayed on the upper right of the screen. If sleep timer  
is activated it is displayed with the TV status and erased with  
it after 3 seconds.  
Setting Hue (In AV mode only) :  
• Using “  
“ or “  
” button select HUE.  
• Press “ ” button to increase HUE level.  
• Press “ ” button to decrease HUE level.  
During the last minute of the count down, the timer is dis-  
played on the upper right of the screen. When the timer  
reaches zero, TV goes to stand-by.  
HUE adjust is functional only when NTSC 3.58/4.43 is ap-  
plied in AV mode. It does not appear when other colour sys-  
tems used.  
Child Lock:  
In Feature Menu, press “  
“ or “  
” button to select  
CHILD LOCK. Using “ ” or “ ” button turn CHILD LOCK On  
or Off.  
When Off is selected, there will be no difference in the opera-  
tion of your TV. When On is selected, the TV can only be  
controlled by the remote control handset. In this case, the  
front panel buttons (except the Switch On/Off button) will not  
work.  
Mode:  
This option is used to change the picture size according to  
the coming transmission.  
• If AUTO function is selected, then the picture size will be  
automatically changed according to the transmission.  
• Selecting 4 : 3 mode forces picture ratio size to 4 : 3.  
• Selecting 16 : 9 mode forces picture ratio size to 16 : 9.  
Language:  
Every program has its own picture mode setting. When you  
store the picture mode for a program other programs keep  
their picture mode setting unaffected.  
Menu Language can be selected by pressing “ ” or “ ” button  
on LANGUAGE item.  
ENGLISH - 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Select the programme number you want to modify the  
settings while no menu appears.  
Install. Menu  
• Press “MENU” button, now you are in main menu. In the  
2. Display the INSTALL. menu.  
main menu, select INSTALL. using “  
then enter the Installation menu pressing “ ” or “ ” button.  
or  
“ or “  
” button,  
3. Follow “To programme a channel in a TV’s program-  
me number manually:” on page 7 and change the set-  
tings of the current programme number.  
• Enter the Installation Menu directly, pressing the BLUE but-  
ton.  
If you want to name the new programme, follow the in-  
structions under "To change the name of a programme"  
on page 7.  
Note:  
Do not use Programme item in the INSTALL. menu to select  
the programme number. If you select the programme number  
with Programme item and store the settings, the selected  
programme number’s current settings are cancelled.  
Program. (Programming) Menu  
PROGRAM. (Programming) menu is used to display the  
programme names and numbers. You can use this menu to  
delete a channel, to insert a channel and to autostore the  
programmes.  
To programme a channel in a TV’s programme  
number manually:  
1. PROGRAMME will be the first selected item as you enter  
the INSTALL. menu. Pressing “ ” or “ ” button select the  
programme number where you want to the tuned channel  
to be stored. (You may also type the programme number  
using the digit buttons.)  
Select the PROGRAM. menu pressing “  
“ or “  
” but-  
ton and open it pressing “ ” or “ ” button. When you enter the  
programme menu, all the programme numbers and names  
will be displayed on the screen. The programme number and  
name of the tuned channel will be shown by the cyan color.  
All the other channel numbers will be white. You can move  
the number in cyan using “  
“ or “  
” or “ ” or “ ” button.  
Also, it's possible to use digit buttons to select programme  
numbers. As you pass through the programme numbers this  
way, to reach the programme number you want, the channels  
corresponding to the programme numbers you pass through  
will be tuned and the selected programme number will be  
shown in cyan.  
2. Press “  
“ or “  
” button to select BAND. Using “ ” or  
“ ” button to select the band in which you want to search a  
channel.  
3. Press “  
“ or “  
”button to select SEARCH. Press “ ”  
or “ ” button to start searching. (Press “ ” button to search  
forward.Press “ ” button to search backwards.)  
If the found channel is not the desired one, press “ ” or “ ”  
button to start searching again.  
To stop searching before a channel is found, press the re-  
verse direction button. For example, when the TV is search-  
ing forward with “ ” button, press “ ” button to stop searching.  
If you know the channel number which you want to find, you  
can find the channel directly.  
To change the name of a programme:  
Press “  
“ or “  
” button to select CHANNEL, then press  
• Move to the channel you want to rename or use the digits  
so that the selected programme number is in cyan color.  
“ ” or “ ” button to select the channel number, or enter the  
number with the digit buttons.  
• Press the RED button. Use “ ” or “ ” button to select the  
4. If you want to name the new programme, follow the instruc-  
tions under "To change the name of a programme" on  
page 7.  
position and press “  
“ or “  
” button to select a letter.  
Now, press the RED button again to store or BLUE button to  
cancel NAME.  
5. If the channel reception is poor, fine-tune the channel.  
Press “  
To delete a channel from a programme number:  
“ or “  
” button to select FINE TUNING,then  
press “ ” or “ ” to fine-tune the channel.  
• Move to the channel you want to delete or use the digits so  
that the selected programme number is in cyan color.  
6. After the all settings are completed, store the new  
channel’s setting to the programme number which you se-  
• Press the YELLOW button. Now the corresponding channel  
will be deleted and all the other channels below this pro-  
gramme number will be moved one programme number up.  
lected. Press “  
“ or “  
” button to select STORE,  
then press “ ” or “ ” to store it.  
If you want to modify the current programme number’s Now, press the YELLOW button again to delete or BLUE but-  
setting (for example, changing fine tuning, etc.) : ton to cancel DELETE.  
ENGLISH - 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To insert a channel into a programme number:  
Other Features  
• Move to the channel to be inserted or use the digits so that  
the selected programme number is in cyan color.  
Sound Mute  
• Press the GREEN button. Now using “  
or “ ” buttons, move to the programme number.  
“ or “  
” or “ ”  
To cut off the sound of the TV, press “ ” button. The sound  
will be cut off. To cancel mute, press “ ” or “ ” or “ ” but-  
ton. The volume level will be the same as the level before  
mute when you cancel mute.  
Now, press the GREEN button again to insert or BLUE button  
to cancel INSERT.  
A.P.S.  
Information on Screen  
If you enter the A.P.S. menu, you can automatically program-  
me the received channels in your TV’s programmes with  
A.P.S. ( Automatic programme system ).  
First pressing the “ ” button displays the current status  
Programme number” and “Station name”.  
1. After displaying the PROGRAM. menu, press the BLUE  
button to enter the A.P.S. menu.  
Pressing this button again displays the current time.  
Pressing this button once more remove the on-screen dis-  
play.  
2. Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
3. Select COUNTRY with the “ “ or “ ” button, then  
“ or “  
” button, then  
press the “ ” or “ ” button to select the country you are  
now located.  
4. If you want to start programming, select START with the  
“ or “  
” button, then press the “ ” button. The  
message “A.P.S. IS RUNNING” appears and A.P.S. auto-  
matically programmes the received channels in your TV’s  
programme numbers. Afrer A.P.S. is finalized, the PRO-  
GRAM. menu appears again.  
To Display the Time  
To cancel A.P.S., press the “ ” button.  
• While watching a TV programme with Teletext transmission  
press “ “ button twice. The current time information, cap-  
tured from Teletext will be displayed on the screen.  
• If the programme being watched does not have Teletext  
transmission, only a box will be displayed at the same loca-  
tion.  
• The time information will disappear after pressing “ “ but-  
ton again.  
When time information is displayed on screen, entering an-  
other menu will remove it.  
Standard  
You can re-set the current PICTURE menu settings (except  
Picture Mode setting) to the default settings.  
• Press “STANDARD” button when no menu appears.  
VCR Control Buttons  
The buttons can be used to operate a JVC brand VCR.  
Pressing the button having the same appearance as the origi-  
nal remote control button of a device makes the function work  
in the same way as the original remote control.  
Press the VCR Control Button to control your VCR.  
Note:  
• If your device is not made by JVC, these buttons cannot be  
used.  
• Even if your device is made by JVC, some of these buttons  
or any one of the buttons may not work, depending on the  
device.  
• You can use the  
/
buttons to choose a TV channel  
which the VCR will receive.  
ENGLISH - 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Select Double Height Text  
Teletext  
• Press “ “ button for the top half of the information page to  
be displayed in double height text.  
Teletext is an information system that displays text on your  
TV screen. Using the Teletext information system you can  
view a page of information on a subject that is available in the  
list of contents (index).  
• Press “ “ button again for the bottom half of the informa-  
tion page to be displayed in double height text.  
No on screen display will be available in text mode.  
• Press “ “ button once more for the full page of normal  
height text.  
No contrast, brightness or colour control, but volume control  
is available in text mode.  
To Reveal “concealed” Information  
To operate Teletext  
• Pressing “ “ button once will reveal answers on a quiz or  
games page.  
• Select a TV station on which Teletext is being transmitted.  
• Press (TELETEXT) “ ” button. Usually the list of contents  
(index) is displayed on the screen.  
• Pressing “ “ button again will conceal the revealed an-  
swers.  
To Stop Automatic Page Change  
The teletext page you have selected may contain more infor-  
mation than what is on the screen; the rest of the information  
will be displayed after a period of time.  
• Press “ “ button to stop the automatic page change.  
• Press “ “ button again to allow the next page to be dis-  
played.  
To Select a Subcode Page  
To select a page of Teletext  
Subcode pages are subsections of long Teletext pages that  
can only be displayed on the screen one section at a time.  
• Press the appropriate digit buttons for the required Teletext  
page number.  
• Select the required Teletext page.  
• Press “ “ button.  
The selected page number is displayed at the top left corner  
of the screen. The Teletext page counter searches until the  
selected page number is located, so that the desired page is  
displayed on the screen.  
• Select the required subcode page number by pressing four  
digit buttons (e.g. 0001).  
• If the selected subcode page is not displayed in a short  
• Press “  
“ button to move the Teletext screen forward  
time, press “ “ button. TV programme will be displayed on  
the screen.  
one page at a time.  
• Press “  
” button to move the Teletext screen backward  
Teletext page number will be displayed on the upper left cor-  
ner of the screen when the selected page is found.  
one page at a time.  
• Press “ “ button to display the selected Teletext page.  
To exit Teletext  
• Press “ ” button. The screen will switch to TV mode.  
To Select Index Page  
To select the page number of the index (generally page  
100), press “ “ button.  
Searching for a teletext page while watching TV  
• In the Teletext mode pressing “ “ button will switch the  
screen to the TV mode. In the TV mode enter a page num-  
ber using digit keys. As you enter last digit of page number,  
” sign will replace the page number and flash until the  
entered page number is found. Then the page number will  
replace “ ” sign again. Now you can display this teletext  
page pressing “ “ button.  
ENGLISH - 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the External Equipments  
Before connecting anything  
• Switch off all equipments including the TV.  
• Read the manuals provided with the equipments.  
To select an AV mode  
Pressing “AV” button on the remote control selects one of the three AV modes (AV- 1, AV-1 S and F-AV).  
To return to the TV mode, repeatedly press “AV” button or press “  
AV-1 (EXT.I) terminal: Euroconnector (21-pin, SCART)  
• Video input, Audio input and RGB inputs are available.  
• TV broadcast outputs (Video and Audio) are available.  
AV-1 S (EXT.I) terminal: Euroconnector (21-pin, SCART)  
• Video input, S-VIDEO (Y/C) input and Audio input are available.  
• Video and Audio outputs are available.  
“ or “  
” button.  
F-AV (Front AV) terminal: RCA connectors x 2  
• Video input and Audio input are available.  
FRONTAV  
)ꢀ$9  
ENGLISH - 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Via the Euroconnector  
Tips  
Your TV set has an Euroconnector socket. If you want to  
connect equipments (e.g. video recorder, decoder, etc.) which  
have Euroconnectors, to your TV, use the AV-1 (EXT.I) or  
AV-1 S (EXT.I) terminals.  
Care of the Screen:  
Clean the screen with a slightly damp, soft cloth. Do not use  
abrasive solvents as they may damage the TV screen coating  
layer.  
AV-1 S Mode  
Poor Picture:  
If the equipment connected to your TV set supports S-Video  
(Y/C) output from Euroconnector, you can have a better pic-  
ture quality by selecting AV-1 S mode and connecting your  
equipment to the AV-1 S (EXT.I) terminal of TV. See your  
equipment's booklet to check if your equipment has such fea-  
ture.  
Have you selected the correct TV system? Is your TV set or  
house aerial located too close to the loudspeakers, non-  
earthed audio equipment or neon lights, etc. ?  
Mountains or high buildings can cause double pictures or  
ghost images. Sometimes you can improve the picture quali-  
ty by changing the direction of the aerial.  
The picture quality may degrade when two peripherals are  
connected to the TV at the same time. In such a case, dis-  
connect one of the peripherals.  
Via the RCA jacks  
If you have an equipment (such as a Camcorder) which has  
the RCA jacks, connect it to the F-AV (Front AV) terminal  
with the video and audio cables.  
No Picture:  
Via the ANT (aerial) socket  
Is the aerial connected properly? Are the plugs connected  
tightly to the aerial socket? Is the aerial cable damaged? Are  
suitable plugs used to connect the aerial? If you are in doubt,  
consult your dealer.  
No Picture means that your TV is not receiving any trans-  
mission. Have you pressed the correct keys on the remote  
control? Try once more.  
If your equipment does not have an Euroconnecter or RCA  
jacks, connect it to the TV with an aerial cable. For details,  
see the manual provided with the equipment.  
To store the test signal that comes from the equipment, see  
"Install. Menu" on page 7 and store it to the programme  
number 0. You can watch images from that equipment to  
select the programme number which you stored the test  
signal.  
Remote Control:  
Your TV no longer responds to the remote control. Press the  
STANDARD” button on the remote control once more. Per-  
haps the batteries are exhausted. If so you can still use the  
local buttons at the front of your TV.  
Have you selected the wrong menu? Press “STANDARD” but-  
ton to return to TV mode or press “MENU” button to return to  
the previous menu.  
TV and Video Recoder (VCR)  
• Connect the Video Recorder to the ANT (antenna input)  
socket of the TV with the aerial cable.  
• Connect the Video Recorder to the AV-1 or AV-1 S terminal  
with the SCART cable, or connect it to the F-AV (Front AV)  
terminal with the audio and video cables.  
No solution:  
Switch your TV set off and on. If this does not work, call the  
service personnel; never attempt to repair it yourself.  
NTSC Playback  
Connect a NTSC video recorder to a terminal. Then press  
AV“ button to select the corresponding AV mode.  
NTSC 3.58/4.43 system is detected automatically in AV  
mode.  
Connecting Headphones  
Use the headphone socket of your TV, to connect head-  
phones.  
ENGLISH - 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
TV BROADCASTING .......................................... PAL B/G  
RECEIVING CHANNELS..................................... VHF (BAND I/III)  
UHF (BAND U)  
HYPERBAND  
CABLE TV (S01-S41 / S75-S79)  
NUMBER OF PRESET CHANNELS ................... 100  
CHANNEL INDICATOR ........................................ On Screen Display  
RF AERIAL INPUT .............................................. 75 Ohm (unbalanced)  
OPERATING VOLTAGE ...................................... 220-240V AC, 50 Hz.  
SOUND-MULTIPLEX SYSTEMS.......................... Mono  
PICTURE TUBE .................................................. For 21”  
AUDIO OUTPUT POWER  
(WRMS.)(%1THD) .................................... 5,5  
POWER CONSUMPTION (W) (max.).................. 85  
DIMENSIONS (mm)  
D........................................................................ 470  
L ........................................................................ 606  
H........................................................................ 475  
Weight (Kg.)........................................................ 21  
ENGLISH - 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
AV-21RM4SP  
FRANÇAIS  
DEUTSCH  
ITALIANO  
CASTELLANO  
NEDERLANDS  
PORTUGUÊS  
COLOUR TELEVISION  
INSTRUCTIONS  
VICTOR COMPANY OF JAPAN, LIMITED  
TELEVISEUR COULEUR  
FARBFERNSEHGERÄT  
TELEVISORE A COLORI  
TELEVISOR A COLOR  
KLEURENTELEVISIE  
TELEVISOR A CORES  
MANUEL D'INSTRUCTIONS  
BEDIENUNGSANLEITUNG  
ISTRUZIONI  
MANUAL DE INSTRUCCIONES  
GEBRUIKSAANWIJZING  
INSTRUÇÕES  
50052453  
©2004 VICTOR COMPANY OF JAPAN, LIMITED  
0504-JVC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Safety Precautions  
1. Power Source  
Safety Precautions ...................................................1  
Remote Control Buttons ..........................................2  
Control Panel Buttons..............................................3  
The receiver should be operated only from a 220-240V AC,  
50 Hz. outlet. Ensure you select the correct voltage setting  
for your convenience.  
Antenna Connections ...............................................3 2. Power Cord  
Preparation................................................................4 The power supply cord should be placed so that they are not  
likely to be walked on or pinched by items placed upon them  
Features .......................................................................... 4  
or against them. Pay particular attention to cord where they  
Before Switching on your TV..................................4  
enter the plug, power outlet, and the point where they exit  
Power connection............................................................. 4  
Aerial Connections ........................................................... 4  
How to connect the external equipments.......................... 4  
Inserting batteries in the remote control handset .............. 4  
from the receiver.  
3. Moisture and Water  
Do not use this equipment in a humid and damp place (avoid  
the bathroom, the sink in the kitchen, and near the washing  
machine). Do not expose this equipment to rain or water and  
do not place objects filled with liquids on it as this may be  
dangerous.  
Switching the TV ON/OFF ........................................4  
To switch the TV on.......................................................... 4  
To switch the TV off .......................................................... 4  
Initial Settings ...........................................................4  
Operating with the onset buttons ...................................... 5  
Operating with Remote Control......................................... 5  
4. Cleaning  
Before cleaning, unplug the receiver from the main supply  
outlet. Do not use liquid or aerosol cleaners. Use with soft  
and dry cloth.  
Menu System .............................................................5  
Picture Menu ................................................................... 5  
Feature Menu ................................................................... 6  
Install. Menu .................................................................... 7  
Program. (Programming) Menu ........................................ 7  
5. Ventilation  
The slots and openings on the receiver are intended for venti-  
lation and to ensure reliable operation. To prevent overheating,  
these openings must not be blocked or covered in anyway.  
Other Features..........................................................8  
Sound Mute ..................................................................... 8  
Information on Screen ...................................................... 8  
To Display the Time.......................................................... 8  
Standard .......................................................................... 8  
VCR Control Buttons........................................................ 8  
6. Lightning  
In case of storm and lightning or when going on holiday, dis-  
connect the power cord from the wall outlet.  
7. Replacement Part  
Teletext ......................................................................9  
When replacement parts are required, be sure the service  
technician has used replacement parts which are specified  
by the manufacturer or have the same specifications as the  
original one. Unauthorized substitutions may result in fire,  
electrical shock, or other hazards.  
To operate Teletext ........................................................... 9  
To select a page of Teletext .............................................. 9  
To Select Index Page ....................................................... 9  
Searching for a teletext page while watching TV............... 9  
To Select Double Height Text ........................................... 9  
To Reveal “concealed” Information .................................... 9 8. Servicing  
To StopAutomatic Page Change ...................................... 9  
To Select a Subcode Page ............................................... 9  
To exit Teletext ................................................................. 9  
Please refer all servicing to qualified personnel. Do not re-  
move cover as this may result in electric shock.  
9. Flame sources  
Do not place naked flame sources on the apparatus.  
Connect the External Equipments........................10  
Via the Euroconnector..................................................... 11  
AV-1 S Mode ................................................................... 11  
Via the RCA jacks........................................................... 11  
Via the ANT (aerial) socket.............................................. 11  
TV and Video Recoder (VCR) .......................................... 11  
10. Stand-By  
Do not leave your TV stand-by or operating condition when you  
leave your house.  
NTSC Playback .............................................................. 11 Warning!  
Connecting Headphones ................................................. 11  
Any intervention contrary to regulations, in particular, any  
modification of high voltage or a replacement of the picture  
tube may lead to an increased concentration of x-rays. Any  
television modified in this way no longer complies with license  
and must not be operated.  
Tips........................................................................... 11  
Specifications..........................................................12  
Instructions for waste disposal:  
Packaging and packaging aids are recyclable and should  
principally be recycled. Packaging materials, such as foil  
bag, must be kept away from children.  
ENGLISH - 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control Buttons  
= Stand By / Power  
0 - 9 = Direct Program  
Standard Button (PICTURE default settings)  
Colour Buttons  
MENU = Menu Button  
(
) = Cursor Up / Programme Up  
) = Cursor Right / Volume +  
(
Teletext Control Buttons  
VCR Control Buttons  
(
) = Cursor Down / Programme Down  
) = Cursor Left / Volume -  
(
AV = AV Button  
= Information Button  
= Mute  
CAUTION  
RISK OF ELECTRIC SHOCK  
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of  
uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk  
of electric shock of persons.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating  
and maintenance (servicing) instructions in the literature accompanying the appliance.  
ENGLISH - 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Panel Buttons  
)5217ꢀ$9  
Antenna Connections  
ENGLISH - 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTE: Remove batteries from remote control handset when it is  
not to be used for a long period. Otherwise it can be damaged  
due to any leakage of batteries.  
Preparation  
Place TV on a solid surface.  
For ventilation, leave a space of at least 10 cm free all around  
the set. To prevent any fault and unsafe situations, please do  
not place any objects on top of the set.  
Switching the TV ON/OFF  
You can operate your TV either using the remote control  
handset or directly using the TV onset buttons.  
Features  
To switch the TV on  
• It is a remote controlled colour television.  
Your TV will switch on in two steps:  
• 100 programmes from VHF, UHF bands or cable channels  
can be preset.  
1- Press the power button located on the front of the TV. Then  
the TV switches itself to standby mode and the RED LED  
located below the TV turns on.  
2- To switch on the TV from stand-by mode either:  
Press a digit button on the remote control so that a program-  
me number is selected,  
• It can tune cable channels.  
• Controlling the TV is very easy by its menu driven system.  
• It has an Euroconnector socket for external devices (such  
as video recorder, video games, audio set, etc.)  
• Front AV Input available.  
or,  
Teletext.  
Press Standby / Power Button or Programme Up and Down  
buttons on the front of the TV or on the remote control re-  
spectively, so the TV will switch on and the RED Led will turn  
GREEN.  
• It is possible to connect headphone.  
• Direct channel access.  
• APS (Automatic Programming System).  
• All programmes can be named.  
• Forward or backward automatic tuning.  
• Sleep timer.  
To switch the TV off  
• Press the stand-by button on the remote control, so the TV  
will switch to stand-by mode and the GREEN LED will be-  
come RED, or,  
• Automatic sound mute when no transmission.  
• Press the power button located on the front of the TV.  
• 5 minutes after the broadcasting (closedown), the TV  
switches itself automatically to stand-by mode.  
Initial Settings  
The message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" will be displayed when you turn  
on your TV for the first time.  
Before Switching on your TV  
Power connection  
1- Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
2- Select COUNTRY with the “ “ or “ ” button, then  
press the “ ” or “ ” button to select the country you are  
now located.  
“ or “  
” button, then  
Important: The TV set is designed to operate on 220-240 V  
AC, 50 Hz.  
• After unpacking, allow the TV set to reach the ambient room  
temperature before you connect the set to the mains.  
Aerial Connections  
3- Select START with the “  
“ or “  
” button, then press  
• Connect the aerial plug to the aerial input socket located at  
the back of the TV.  
the “ ” button to start APS.  
APS (Automatic Programming System) automatically pro-  
grammes the received channels in your TV’s programme  
numbers. During APS, "A. P. S. IS RUNNING" will be dis-  
played. After APS is finalized, the “PROGRAM.” menu ap-  
pears.  
How to connect the external equipments  
See “Connect the External Equipments” on page 10.  
• See the instruction manuals provided with the external de-  
vices too.  
To cancel APS, press the “ ” button.  
You can delete a channel, insert a channel into a programme  
number, or re-start APS with the “PROGRAM.” menu.  
Inserting batteries in the remote control handset  
• Remove the battery cover located on the back of the hand-  
set by gently pulling upwards from the indicated part.  
For details, see “Program. (Programming) Menu” on page  
7.  
• Insert two AA (R6) or equivalent type batteries inside.  
4- Press the "STANDARD" button to complete the initial set-  
tings.  
• Replace the battery cover.  
After the initial settings are complete, you can change a pro-  
gramme number or to name a programme number or to pro-  
gramme new channel manually. For details, see  
Install. Menu” on page 7.  
If the message "PLEASE CHECK ANTENNA CABLE AUTO.  
PROGRAMMING SYSTEM" does not appear, follow the de-  
scription “Program. (Programming) Menu” on page 7 to  
select a menu language and the country where you are now  
located, and to use A.P.S..  
ENGLISH - 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme Selecting (direct access):  
Press digit buttons on the remote control handset to select  
programmes between 0 and 9. TV will switch to the selected  
program after a short delay.  
When you press first digit, second digit will be displayed with  
‘-’ symbol for 3 seconds. To select programmes between 10  
and 99 press corresponding digit buttons consecutively be-  
fore ‘-’ symbol on the second digit disappears. (e.g. for pro-  
gramme 27, first press 2 and then 7 while program number  
displayed as ‘2-’ )  
Menu System  
Your TV has been designed with a menu system. Display  
“MENU” (main menu) and enter one of four menus (PIC-  
TURE, FEATURE, INSTALL. and PROGRAM.).  
Operating with the onset buttons  
1- Press “MENU” button to display “MENU” (main menu).  
The menu titles will be displayed in the main menu.  
Volume setting and programme selection can be made using  
the buttons on the front panel.  
2- Press “  
“ or “  
” button to select a menu title, then  
Volume Setting  
press “ ” or “ ” button to enter the menu.  
To exit a menu, press “STANDARD” button.  
To go to the previous menu, press “MENU” button.  
• Press “-  
” button to decrease volume or “  
+” button to  
increase volume, so a volume level scale will be displayed  
on the screen.  
Picture Menu  
Programme Selecting  
To change picture settings:  
• Press “P/CH+” button to select next programme or “-P/CH”  
button to select the previous programme.  
• Press “MENU” button, now you are in main menu. In the  
main menu, select PICTURE using “  
then enter the picture menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button,  
Entering Main Menu  
• Press “MENU” button to enter main menu. In the main  
menu select submenu using “P/CH+” or “-P/CH” button and  
enter the submenu using “  
the usage of the menus, refer to “Menu System” on page  
5.  
• Enter the Picture Menu directly, pressing the GREEN but-  
ton.  
+” or “-  
” button. To learn  
Setting Brightness:  
Operating with Remote Control  
• As you enter the picture menu, BRIGHTNESS will be the  
first selected option.  
The remote control handset of your TV is designed to control  
all the functions of the model you selected. The functions will  
be described in accordance with the menu system of your  
TV.  
• Press “ ” button to increase BRIGHTNESS.  
• Press “ ” button to decrease BRIGHTNESS.  
Functions which you can use out of menu system are de-  
scribed below.  
Volume Setting  
Press “ ” button to increase volume.  
Press “ ” button to decrease volume.  
Setting Contrast:  
• Using “  
“ or “  
” button select CONTRAST.  
• Press “ ” button to increase CONTRAST level.  
• Press “ ” button to decrease CONTRAST level.  
Programme Selecting (Previous or next programme)  
• Press “  
• Press “  
” button to select the previous programme.  
“ button to select the next programme.  
Setting Colour:  
• Using “  
“ or “  
” button select COLOUR.  
• Press “ ” button to increase COLOUR level.  
ENGLISH - 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press “ ” button to decrease COLOUR level.  
Feature Menu  
• Press “MENU” button, now you are in main menu. In the  
main menu, select FEATURE, using “  
Then enter the feature menu pressing “ ” or “ ” button.  
or,  
“ or “  
” button.  
• Enter the Feature Menu directly, pressing the YELLOW  
button.  
Sleep Timer:  
Setting Sharpness:  
• As you enter the feature menu, SLEEP TIMER will be the  
first selected option.  
• Using “  
“ or “  
” button select SHARPNESS.  
• Use “ ” or “ ” button to change the value of the sleep timer  
between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00,  
1:30:00, 1:45:00 and 2:00:00. hours. Your TV will get into  
standby mode when the period you selected passes after  
you make the selection.  
• Press “ ” button to increase SHARPNESS level.  
• Press “ ” button to decrease SHARPNESS level.  
It is displayed on the upper right of the screen. If sleep timer  
is activated it is displayed with the TV status and erased with  
it after 3 seconds.  
Setting Hue (In AV mode only) :  
• Using “  
“ or “  
” button select HUE.  
• Press “ ” button to increase HUE level.  
• Press “ ” button to decrease HUE level.  
During the last minute of the count down, the timer is dis-  
played on the upper right of the screen. When the timer  
reaches zero, TV goes to stand-by.  
HUE adjust is functional only when NTSC 3.58/4.43 is ap-  
plied in AV mode. It does not appear when other colour sys-  
tems used.  
Child Lock:  
In Feature Menu, press “  
“ or “  
” button to select  
CHILD LOCK. Using “ ” or “ ” button turn CHILD LOCK On  
or Off.  
When Off is selected, there will be no difference in the opera-  
tion of your TV. When On is selected, the TV can only be  
controlled by the remote control handset. In this case, the  
front panel buttons (except the Switch On/Off button) will not  
work.  
Mode:  
This option is used to change the picture size according to  
the coming transmission.  
• If AUTO function is selected, then the picture size will be  
automatically changed according to the transmission.  
• Selecting 4 : 3 mode forces picture ratio size to 4 : 3.  
• Selecting 16 : 9 mode forces picture ratio size to 16 : 9.  
Language:  
Every program has its own picture mode setting. When you  
store the picture mode for a program other programs keep  
their picture mode setting unaffected.  
Menu Language can be selected by pressing “ ” or “ ” button  
on LANGUAGE item.  
ENGLISH - 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B/G  
L
: C02-C73 / S01-S41 / S75-S79  
: C01-C73 / S01-S41 / S75-S77  
Install. Menu  
• Press “MENU” button, now you are in main menu. In the  
6. If the channel reception is poor, fine-tune the channel.  
Press “ “ or “ ” button to select FINE TUNING,then  
press “ ” or “ ” to fine-tune the channel.  
main menu, select INSTALL. using “  
then enter the Installation menu pressing “ ” or “ ” button.  
or  
“ or “  
” button,  
7. After the all settings are completed, store the new  
channel’s setting to the programme number which you se-  
lected. Press “  
• Enter the Installation Menu directly, pressing the BLUE but-  
ton.  
“ or “  
” button to select STORE,  
then press “ ” or “ ” to store it.  
If you want to modify the current programme number’s  
setting (for example, changing fine tuning, etc.) :  
1. Select the programme number you want to modify the  
settings while no menu appears.  
2. Display the INSTALL. menu.  
3. Follow “To programme a channel in a TV’s program-  
me number manually:” on page 7 and change the set-  
tings of the current programme number.  
To programme a channel in a TV’s programme  
number manually:  
If you want to name the new programme, follow the in-  
structions under "To change the name of a programme"  
on page 7.  
1. PROGRAMME will be the first selected item as you enter  
the INSTALL. menu. Pressing “ ” or “ ” button select the  
programme number where you want to the tuned channel  
to be stored. (You may also type the programme number  
using the digit buttons.)  
Note:  
Do not use Programme item in the INSTALL. menu to select  
the programme number. If you select the programme number  
with Programme item and store the settings, the selected  
programme number’s current settings are cancelled.  
Program. (Programming) Menu  
PROGRAM. (Programming) menu is used to display the  
programme names and numbers. You can use this menu to  
delete a channel, to insert a channel and to autostore the  
programmes.  
Select the PROGRAM. menu pressing “  
“ or “  
” but-  
ton and open it pressing “ ” or “ ” button. When you enter the  
programme menu, all the programme numbers and names  
will be displayed on the screen. The programme number and  
name of the tuned channel will be shown by the cyan color.  
All the other channel numbers will be white. You can move  
2. Press “  
“ or “  
” button to select BAND. Using “ ” or  
“ ” button to select the band in which you want to search a  
channel.  
3. Press “  
“ or “  
”button to select SEARCH. Press “ ”  
the number in cyan using “  
“ or “  
” or “ ” or “ ” button.  
or “ ” button to start searching. (Press “ ” button to search  
forward.Press “ ” button to search backwards.)  
Also, it's possible to use digit buttons to select programme  
numbers. As you pass through the programme numbers this  
way, to reach the programme number you want, the channels  
corresponding to the programme numbers you pass through  
will be tuned and the selected programme number will be  
shown in cyan.  
If the found channel is not the desired one, press “ ” or “ ”  
button to start searching again.  
To stop searching before a channel is found, press the re-  
verse direction button. For example, when the TV is search-  
ing forward with “ ” button, press “ ” button to stop searching.  
If you know the channel number which you want to find, you  
can find the channel directly.  
Press “  
“ or “  
” button to select CHANNEL, then press  
“ ” or “ ” button to select the channel number, or enter the  
number with the digit buttons.  
(Follow the step 5 to select the correct standard before you  
select a channel number.)  
4. If you want to name the new programme, follow the instruc-  
tions under "To change the name of a programme" on  
page 7.  
5. If the sound or picture is abnormal, change the standard  
(broadcasting system) of new channel.  
To change the name of a programme:  
Press “  
“ or “  
” button to select STANDARD, then  
• Move to the channel you want to rename or use the digits  
so that the selected programme number is in cyan color.  
press “ ” or “ ” button to change the correct one.  
The indicated channel number will be changed when you  
change the standard.  
ENGLISH - 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press the RED button. Use “ ” or “ ” button to select the  
position and press “ “ or “ ” button to select a letter.  
Other Features  
Now, press the RED button again to store or BLUE button to  
cancel NAME.  
Sound Mute  
To cut off the sound of the TV, press “ ” button. The sound  
To delete a channel from a programme number:  
will be cut off. To cancel mute, press “ ” or “ ” or “ ” but-  
ton. The volume level will be the same as the level before  
mute when you cancel mute.  
• Move to the channel you want to delete or use the digits so  
that the selected programme number is in cyan color.  
• Press the YELLOW button. Now the corresponding channel  
will be deleted and all the other channels below this pro-  
gramme number will be moved one programme number up.  
Information on Screen  
First pressing the “ ” button displays the current status  
Now, press the YELLOW button again to delete or BLUE but-  
ton to cancel DELETE.  
Programme number” and “Station name”.  
Pressing this button again displays the current time.  
To insert a channel into a programme number:  
Pressing this button once more remove the on-screen dis-  
play.  
• Move to the channel to be inserted or use the digits so that  
the selected programme number is in cyan color.  
• Press the GREEN button. Now using “  
“ or “  
” or “ ”  
or “ ” buttons, move to the programme number.  
Now, press the GREEN button again to insert or BLUE button  
to cancel INSERT.  
A.P.S.  
If you enter the A.P.S. menu, you can automatically program-  
me the received channels in your TV’s programmes with  
A.P.S. ( Automatic programme system ).  
To Display the Time  
1. After displaying the PROGRAM. menu, press the BLUE  
button to enter the A.P.S. menu.  
• While watching a TV programme with Teletext transmission  
press “ “ button twice. The current time information, cap-  
tured from Teletext will be displayed on the screen.  
2. Select LANGUAGE with the “  
press the “ ” or “ ” button to select a menu language.  
3. Select COUNTRY with the “ “ or “ ” button, then  
“ or “  
” button, then  
• If the programme being watched does not have Teletext  
transmission, only a box will be displayed at the same loca-  
tion.  
press the “ ” or “ ” button to select the country you are  
now located.  
• The time information will disappear after pressing “ “ but-  
ton again.  
4. If you want to start programming, select START with the  
“ or “  
” button, then press the “ ” button. The  
message “A.P.S. IS RUNNING” appears and A.P.S. auto-  
matically programmes the received channels in your TV’s  
programme numbers. Afrer A.P.S. is finalized, the PRO-  
GRAM. menu appears again.  
When time information is displayed on screen, entering an-  
other menu will remove it.  
Standard  
To cancel A.P.S., press the “ ” button.  
You can re-set the current PICTURE menu settings (except  
Picture Mode setting) to the default settings.  
• Press “STANDARD” button when no menu appears.  
VCR Control Buttons  
The buttons can be used to operate a JVC brand VCR.  
Pressing the button having the same appearance as the origi-  
nal remote control button of a device makes the function work  
in the same way as the original remote control.  
Press the VCR Control Button to control your VCR.  
Note:  
• If your device is not made by JVC, these buttons cannot be  
used.  
• Even if your device is made by JVC, some of these buttons  
or any one of the buttons may not work, depending on the  
device.  
• You can use the  
/
buttons to choose a TV channel  
which the VCR will receive.  
ENGLISH - 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Select Double Height Text  
Teletext  
• Press “ “ button for the top half of the information page to  
be displayed in double height text.  
Teletext is an information system that displays text on your  
TV screen. Using the Teletext information system you can  
view a page of information on a subject that is available in the  
list of contents (index).  
• Press “ “ button again for the bottom half of the informa-  
tion page to be displayed in double height text.  
No on screen display will be available in text mode.  
• Press “ “ button once more for the full page of normal  
height text.  
No contrast, brightness or colour control, but volume control  
is available in text mode.  
To Reveal “concealed” Information  
To operate Teletext  
• Pressing “ “ button once will reveal answers on a quiz or  
games page.  
• Select a TV station on which Teletext is being transmitted.  
• Press (TELETEXT) “ ” button. Usually the list of contents  
(index) is displayed on the screen.  
• Pressing “ “ button again will conceal the revealed an-  
swers.  
To Stop Automatic Page Change  
The teletext page you have selected may contain more infor-  
mation than what is on the screen; the rest of the information  
will be displayed after a period of time.  
• Press “ “ button to stop the automatic page change.  
• Press “ “ button again to allow the next page to be dis-  
played.  
To Select a Subcode Page  
To select a page of Teletext  
Subcode pages are subsections of long Teletext pages that  
can only be displayed on the screen one section at a time.  
• Press the appropriate digit buttons for the required Teletext  
page number.  
• Select the required Teletext page.  
• Press “ “ button.  
The selected page number is displayed at the top left corner  
of the screen. The Teletext page counter searches until the  
selected page number is located, so that the desired page is  
displayed on the screen.  
• Select the required subcode page number by pressing four  
digit buttons (e.g. 0001).  
• If the selected subcode page is not displayed in a short  
• Press “  
“ button to move the Teletext screen forward  
time, press “ “ button. TV programme will be displayed on  
the screen.  
one page at a time.  
• Press “  
” button to move the Teletext screen backward  
Teletext page number will be displayed on the upper left cor-  
ner of the screen when the selected page is found.  
one page at a time.  
• Press “ “ button to display the selected Teletext page.  
To exit Teletext  
• Press “ ” button. The screen will switch to TV mode.  
To Select Index Page  
To select the page number of the index (generally page  
100), press “ “ button.  
Searching for a teletext page while watching TV  
• In the Teletext mode pressing “ “ button will switch the  
screen to the TV mode. In the TV mode enter a page num-  
ber using digit keys. As you enter last digit of page number,  
” sign will replace the page number and flash until the  
entered page number is found. Then the page number will  
replace “ ” sign again. Now you can display this teletext  
page pressing “ “ button.  
ENGLISH - 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the External Equipments  
Before connecting anything  
• Switch off all equipments including the TV.  
• Read the manuals provided with the equipments.  
To select an AV mode  
Pressing “AV” button on the remote control selects one of the three AV modes (AV- 1, AV-1 S and F-AV).  
To return to the TV mode, repeatedly press “AV” button or press “  
AV-1 (EXT.I) terminal: Euroconnector (21-pin, SCART)  
• Video input, Audio input and RGB inputs are available.  
• TV broadcast outputs (Video and Audio) are available.  
AV-1 S (EXT.I) terminal: Euroconnector (21-pin, SCART)  
• Video input, S-VIDEO (Y/C) input and Audio input are available.  
• Video and Audio outputs are available.  
“ or “  
” button.  
F-AV (Front AV) terminal: RCA connectors x 2  
• Video input and Audio input are available.  
FRONTAV  
)ꢀ$9  
ENGLISH - 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Via the Euroconnector  
Tips  
Your TV set has an Euroconnector socket. If you want to  
connect equipments (e.g. video recorder, decoder, etc.) which  
have Euroconnectors, to your TV, use the AV-1 (EXT.I) or  
AV-1 S (EXT.I) terminals.  
Care of the Screen:  
Clean the screen with a slightly damp, soft cloth. Do not use  
abrasive solvents as they may damage the TV screen coating  
layer.  
AV-1 S Mode  
Poor Picture:  
If the equipment connected to your TV set supports S-Video  
(Y/C) output from Euroconnector, you can have a better pic-  
ture quality by selecting AV-1 S mode and connecting your  
equipment to the AV-1 S (EXT.I) terminal of TV. See your  
equipment's booklet to check if your equipment has such fea-  
ture.  
Have you selected the correct TV system? Is your TV set or  
house aerial located too close to the loudspeakers, non-  
earthed audio equipment or neon lights, etc. ?  
Mountains or high buildings can cause double pictures or  
ghost images. Sometimes you can improve the picture quali-  
ty by changing the direction of the aerial.  
The picture quality may degrade when two peripherals are  
connected to the TV at the same time. In such a case, dis-  
connect one of the peripherals.  
Via the RCA jacks  
If you have an equipment (such as a Camcorder) which has  
the RCA jacks, connect it to the F-AV (Front AV) terminal  
with the video and audio cables.  
No Picture:  
Via the ANT (aerial) socket  
Is the aerial connected properly? Are the plugs connected  
tightly to the aerial socket? Is the aerial cable damaged? Are  
suitable plugs used to connect the aerial? If you are in doubt,  
consult your dealer.  
No Picture means that your TV is not receiving any trans-  
mission. Have you pressed the correct keys on the remote  
control? Try once more.  
If your equipment does not have an Euroconnecter or RCA  
jacks, connect it to the TV with an aerial cable. For details,  
see the manual provided with the equipment.  
To store the test signal that comes from the equipment, see  
"Install. Menu" on page 7 and store it to the programme  
number 0. You can watch images from that equipment to  
select the programme number which you stored the test  
signal.  
Remote Control:  
Your TV no longer responds to the remote control. Press the  
STANDARD” button on the remote control once more. Per-  
haps the batteries are exhausted. If so you can still use the  
local buttons at the front of your TV.  
Have you selected the wrong menu? Press “STANDARD” but-  
ton to return to TV mode or press “MENU” button to return to  
the previous menu.  
TV and Video Recoder (VCR)  
• Connect the Video Recorder to the ANT (antenna input)  
socket of the TV with the aerial cable.  
• Connect the Video Recorder to the AV-1 or AV-1 S terminal  
with the SCART cable, or connect it to the F-AV (Front AV)  
terminal with the audio and video cables.  
No solution:  
Switch your TV set off and on. If this does not work, call the  
service personnel; never attempt to repair it yourself.  
NTSC Playback  
Connect a NTSC video recorder to a terminal. Then press  
AV“ button to select the corresponding AV mode.  
NTSC 3.58/4.43 system is detected automatically in AV  
mode.  
Connecting Headphones  
Use the headphone socket of your TV, to connect head-  
phones.  
ENGLISH - 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
TV BROADCASTING .......................................... PAL SECAM B/G L  
RECEIVING CHANNELS..................................... VHF (BAND I/III)  
UHF (BAND U)  
HYPERBAND  
CABLE TV (B/G : S01-S41 / S75-S79 ; L: S01-S41 / S75-S77)  
NUMBER OF PRESET CHANNELS ................... 100  
CHANNEL INDICATOR ........................................ On Screen Display  
RF AERIAL INPUT .............................................. 75 Ohm (unbalanced)  
OPERATING VOLTAGE ...................................... 220-240V AC, 50 Hz.  
SOUND-MULTIPLEX SYSTEMS.......................... Mono  
PICTURE TUBE .................................................. For 21”  
AUDIO OUTPUT POWER  
(WRMS.)(%1THD) .................................... 5,5  
POWER CONSUMPTION (W) (max.).................. 85  
DIMENSIONS (mm)  
D........................................................................ 470  
L ........................................................................ 606  
H........................................................................ 475  
Weight (Kg.)........................................................ 21  
ENGLISH - 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jeep Motorized Toy Car 74383 User Manual
Jenn Air Dishwasher W10321619A User Manual
Jensen Car Stereo System VM8514 User Manual
Jumpking Fitness Equipment JP1514 User Manual
JVC Car Stereo System LVT1003 001B User Manual
JVC Cassette Player KWXC410J KW XC410 User Manual
Kenmore Water System 6253882 User Manual
Kenwood Satellite Radio TK 2402 User Manual
Kenwood Stereo System KOS V500 User Manual
Kodak Digital Photo Frame D1030 User Manual