JVC CD Player XL MV7000GD User Manual

VIDEO CD PLAYER  
XL-MV7000GD  
VCD  
TV  
/
/
DOLBY  
V.EFFECT SURROUND  
MPX  
V.REPLACE  
CD1  
KEY CONTROL  
ON SCREEN  
CD3  
CD2  
SELECT  
SLOW  
XL-MV7000 VIDEO CD PLAYER  
1
2
3
4
5
6
7
CD3  
CD2  
CD1  
RANDOM PROGRAM CANCEL  
VIDEO  
B.MARK  
CD  
CD  
STANDBY  
VOCAL  
DOLBY  
MPX  
UP  
/
EFFECT  
SURROUND  
INTRO HIGHLIGHT B.DIGEST B.SEARCH  
8
STANDBY/ON  
KEY CONTROL  
NORMAL  
DOWN  
POWER  
ON OFF  
9
NORMAL PBC OFF  
1
5
9
2
6
3
7
4
8
3
CD  
CD  
RETURN  
STILL  
10  
PLAY & EXCHANGE  
MIC  
1
MIC  
2
MIC  
3
DIGITAL ECHO  
PROGRAM  
+10  
VIDEO INTRO  
BOOK DIGEST  
BOOKMARK  
B.SEARCH  
ATIME  
10  
+10  
REPEAT SUBTITLE  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
SHIFT  
TV/VIDEO  
TV ch  
TV VOL  
MIN  
MAX  
SELECT  
SUBTITLE  
PREV  
NEXT  
PHONES  
DESIGNED BY JVC  
RM-SXLMV777U  
MULTI BRAND REMOTE CONTROL  
'
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bottom or  
side of the cabinet. Retain this information for  
future reference.  
INSTRUCTIONS  
Model No.  
Serial No.  
LVT0462-001A  
[U,US]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT FOR LASER PRODUCTS  
REPRODUCTION OF LABELS  
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLO-  
SURE  
2
WARNING LABEL, PLACED INSIDE THE UNIT  
DANGER: Invisible laser  
radiation when open and  
interlock failed or defeated.  
AVOID DIRECT EXPOSURE  
VARNING: Osynlig laser-  
strålning när denna del är  
öppnad och spärren är  
urkopplad.  
strålen.  
Betrakta  
ej  
(s)  
CLASS  
LASER  
1
TO BEAM.  
(e)  
PRODUCT  
ADVARSEL: Usynlig laser-  
stråling ved åbning, når  
sikkerhedsafbrydere er ude  
af funktion. Undgå udsæt-  
VARO: Avattaessa ja suo-  
jalukitus ohitettaessa olet  
alttiina  
lasersäteilylle. Älä katso  
säteeseen. (f)  
näkymättömälle  
telse for stråling  
(d)  
1. CLASS 1 LASER PRODUCT  
2. DANGER: Invisible laser radiation when open and interlock  
failed or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user  
serviceable parts inside the Unit; leave all servicing to quali-  
fied service personnel.  
G-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
We would like to thank you for purchasing one of our JVC products.  
Before connecting this unit to the wall outlet, read the instructions  
carefully to ensure that you obtain the best possible performance. If  
you have any questions, consult your JVC dealer.  
Table of contents  
Care and handling of compact discs ......................................................... 1  
GENERAL INFORMATION ...................................................................... 1  
BEFORE USING FOR THE FIRST TIME ................................................. 2  
Basic connections ..................................................................................... 2  
Connecting the player to a TV or amplifier/receiver using the Audio  
Video cable ....................................................................................... 2  
Connecting the player to an amplifier/receiver equipped with the  
analog discrete inputs ....................................................................... 2  
Video out select ................................................................................... 2  
Connecting the AV COMPU LINK cable.............................................. 3  
Connecting the power cord.................................................................. 3  
Installing batteries ..................................................................................... 3  
Putting batteries in the remote control ................................................. 3  
OVERVIEW OF CONTROLS ................................................................... 4  
Front panel .......................................................................................... 4  
Remote control unit ............................................................................. 5  
BASIC OPERATIONS .............................................................................. 6  
Now you can play a variety of discs!! ........................................................ 6  
Overview of the two play modes.......................................................... 6  
Triple disc tray usage .......................................................................... 6  
Display window .................................................................................... 6  
Preparation for playing ........................................................................ 6  
Inserting/removing disc(s) ................................................................... 7  
Starting to play disc(s) ......................................................................... 7  
Using number keys .............................................................................. 7  
Stopping play ....................................................................................... 8  
Pausing play ........................................................................................ 8  
Skipping the track ................................................................................ 8  
Manual search ..................................................................................... 8  
Slow-motion playback on the remote control unit ................................ 9  
Using stereo headphones.................................................................... 9  
Setting TV TYPE ................................................................................. 9  
Selecting the Dolby Surround mode .................................................. 10  
To adjust the output balance of speakers.......................................... 10  
Using the remote control ......................................................................... 11  
Presetting the remote control to operate your own TV ...................... 11  
Using the SHIFT button on the remote control unit ........................... 11  
Preset code table............................................................................... 12  
VARIOUS UNIQUE FUNCTIONS........................................................... 13  
Various functions to enhance your enjoyment ........................................ 13  
Display of operations status .............................................................. 13  
Programming the track sequence you want ...................................... 13  
Canceling a programmed track ......................................................... 13  
Clearing a program ............................................................................ 13  
Repeating tracks................................................................................ 14  
Randomly playing tracks ................................................................... 14  
Playing back a track from the desired time........................................ 14  
Playing a multiplex sound CD............................................................ 15  
Viewing the VIDEO INTRO................................................................ 15  
Programming during VIDEO INTRO.................................................. 15  
Viewing the highlights ........................................................................ 16  
Playback with the Bookmark function ..................................................... 17  
Marking segments for later viewing with the Bookmark function ......... 17  
Using the BOOK DIGEST button....................................................... 17  
Using the B. SEARCH button ............................................................ 17  
Canceling individual bookmarks ........................................................ 18  
Canceling all bookmarks on individual discs ..................................... 18  
Using a microphone ................................................................................ 19  
Using a wired microphone ................................................................. 19  
Adjusting music key ........................................................................... 19  
Adjusting echo effect ......................................................................... 19  
Vocal replace ..................................................................................... 20  
Vocal effect ........................................................................................ 20  
OPERATION OF PLAYBACK CONTROL FUNCTION ......................... 21  
Playing Video CDs and SVCDs with Playback Control function ............. 21  
Video CDs and SVCDs with Playback Control function .................... 22  
RESTRICTING USE OF YOUR DISCS .................................................. 23  
Locking a disc with the Read-Protect function ........................................ 23  
Locking a disc .................................................................................... 23  
Canceling Read-Protect .................................................................... 23  
Releasing the Read-Protect temporarily............................................ 23  
DIGITAL AUDIO CDs ............................................................................. 24  
Playing Digital Audio CDs ....................................................................... 24  
Playing Digital Audio CDs.................................................................. 24  
Unavailable functions for Audio CDs ................................................. 24  
AV COMPU LINK REMOTE CONTROL SYSTEM ................................ 25  
AV COMPU LINK remote control system ............................................... 25  
Connection and setup........................................................................ 25  
Operation ........................................................................................... 25  
SPECIFICATIONS .................................................................................. 26  
Main specifications.................................................................................. 26  
TROUBLESHOOTING ........................................................................... 27  
Troubleshooting ...................................................................................... 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL INFORMATION  
Care and handling of  
compact discs  
How to handle CDs  
Which compact discs can be used?  
When handling a compact disc, do not touch the surface of the disc  
(reflective silver side –– the side without the label).  
Since compact discs are made of plastic, they are easily damaged. If  
a disc gets dirty, dusty, scratched or warped, the sound will not be  
picked up correctly and, in addition, such a disc may cause the CD  
player to malfunction.  
Many types of compact discs are sold for a variety of uses. The player  
can play the following compact discs:  
SVCD (Super VCD) discs  
*Better video resolution using MPEG2 and VBR  
(Variable Bit Rate) technologies.  
*Up to four languages can be included as subtitles  
or song lyrics.  
*Up to four languages can be included as audio.  
Video CD discs both with and without PBC  
function  
PlayBack  
Control  
Care of the label side  
Do not damage the label side, stick paper to, or use any adhesive on  
its surface.  
Audio CD discs  
'
Storage  
Make sure that discs are kept in their cases. If discs are piled one on  
topofanotherwithouttheirprotectivecases,theycanbedamaged. Do  
notputdiscsinalocationwheretheymaybeexposedtodirectsunlight,  
or in a place where the humidity or temperature is high. Avoid leaving  
discs in your car!  
Discs you can't play back  
Any other discs than listed above (such as CD-ROM, DVD or CD-I  
discs) cannot be played. Playing back such discs may generate noise  
and damage your speakers.  
* Even though a logo listed above is printed on the disc, it may not be  
played if it is a non-standard disc.  
Maintenance of discs  
If there are fingerprints or dirt adhering to a disc, wipe it with a soft dry  
cloth, moving from the center outwards.  
Using the remote control  
The remote control is ready to use when its batteries are installed  
properly.  
If a disc is difficult to clean, wipe with a cloth moistened with water.  
Never use record cleaners, petrol, alcohol or any anti-static agents.  
To use it, point its infrared light-emitting window toward the display  
window of the player and press a button. The operating range of the  
remote control is up to about seven meters in front of the player and  
within about 30 degrees to each side –– with nothing between the  
remote control and the player interrupting the beam path.  
If pressing a button on the remote control does not produce any  
response, check to make sure it is pointed correctly and try again. If it  
still does not function, check the batteries.  
CAUTION  
Sometimes during play noise or images may be garbled. This is  
sometimes due to the disc. (It may not be up to industry standards.)  
These symptom are caused by the discs, not by the malfunction of  
the player.  
Page 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING FOR THE FIRST TIME  
Basic connections  
The Video CD player must be connected directly to a television set or,  
Connecting the player to an amplifier/  
receiver equipped with the analog dis-  
crete inputs  
an amplifier or receiver that is connected to a television or monitor.  
Select a level, dry location free of dust and vibration, having a  
temperature maintained between 5 and 35°C (41 and 95°F).  
Connecttheplayer’s5-channeloutputs(AUDIOOUTFRONT-RIGHT/  
LEFT, AUDIO OUT SURROUND-RIGHT/LEFT, and AUDIO OUT  
CENTER) to the analog discrete inputs of an amplifier/receiver using  
audio cables, while the VIDEO OUT to the television’s video input  
terminal using the yellow plugs of the supplied Audio Video cable. Be  
sure to connect correctly between corresponding terminals.  
Connecting the player to a TV or ampli-  
fier/receiver using the Audio Video cable  
First make the audio and video connections before connecting the AC  
power cord. Also, make sure that the equipment (television, amplifier  
or receiver) to be connected with the player is turned off.  
Firmly insert the yellow pin plug of the Audio Video cable in the yellow  
VIDEO OUT jack on the rear panel of the player; the red pin plug in the  
red AUDIO OUT FRONT (RIGHT) jack; and the white pin plug in the  
white AUDIO OUT FRONT (LEFT) jack. (The RIGHT and LEFT output  
jacks are for the right and left audio channels.)  
To input FRONT  
jack of the  
amplifier/receiver  
ThenfirmlyinsertthepinplugsattheotherendoftheAudioVideocable  
into the matching video and audio INPUT jacks.  
If your television set has an S-video input, we recommend you to  
connect it with S-VIDEO OUT of the player using the optional S-Video  
cable, in addition to the (standard) video connection, to get a better  
picture quality.  
To input REAR  
jack of the  
amplifier/receiver  
To input audio jack of  
the television/amplifier/  
receiver  
Audio cable  
(optional)  
Audio cable (optional)  
Audio Video cable (supplied)  
To input CENTER jack of  
the amplifier/receiver  
Video out select  
Set the VIDEO OUT SELECT switch on the rear panel to NTSC, PAL,  
or MULTI mode according to your television system.  
Audio Video cable (supplied)  
To input video jack of  
the television/amplifier/receiver  
NTSC .................... for NTSC exclusive TV  
PAL ....................... for PAL exclusive TV  
MULTI ................... for Multisystem TV  
To input S-Video jack of  
the television/amplifier/receiver  
S-Video cable (optional)  
Note  
Set the switch before turning the power on. If you change the switch  
position while the power is on, the new setting does not become  
effective until you turn the power to standby and then on.  
Page 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE USING FOR THE FIRST TIME  
Installing batteries  
Connecting the AV COMPU LINK cable  
Putting batteries in the remote control  
Connect with other JVC equipment supporting the AV Compulink by  
using the supplied AV COMPU LINK cable to facilitate operations.  
See “AV COMPU LINK remote control system” on page 25.  
The battery compartment is located on the back of the remote control.  
1. Insert your finger in the recess under the battery compartment  
cover, and pull off the cover.  
2. Place the two accessory R6P (SUM-3)/AA (15F) batteries in the  
remote control according to the polarity markings (“+” and  
“–”) inside the compartment and on the batteries.  
AV COMPU LINK cable  
To AV COMPU LINK jack  
of another JVC equipment  
Connecting the power cord  
IMPORTANT  
Check the setting of the VOLTAGE SELECTOR switch on the rear  
panel of the player.  
Change the setting if the switch is not set for the main voltage  
supplied to your home.  
After the audio-video connectors had been connected, insert the  
female end of the power cord firmly into the AC POWER CORD socket  
located on the rear panel of the player. Then insert the male end of the  
power cord into the wall outlet.  
3. Insert the two tabs of the cover in their respective slots, and  
snap the cover in place.  
When the power cord is connected and the POWER ON/OFF button  
is depressed (ON), the STANDBY indicator on the left-hand side of the  
player’s front panel comes on. See “Overview of Controls” for a  
description of the controls on the player.  
The batteries last about one year with normal use. If function of the  
remote control become erratic, replace the batteries.  
Precautions for the safe use of batteries  
Observe the following precautions for the safe use of batteries. Their  
life will be shortened, they may burst or their contents may leak if they  
are used improperly.  
AC power cord  
Wall outlet  
Page 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW OF CONTROLS  
The following is an explanation of the basic function of controls on the  
front panel of the player and the remote control. The function of some  
controls may be restricted in actual use depending on the  
on-going operations. The remote control has fourteen unique func-  
tion buttons in addition to those on the player.  
XL-MV7000 VIDEO CD PLAYER  
3
4
5
13  
CD  
STANDBY  
VOCAL  
EFFECT  
DOLBY  
SURROUND  
MPX  
/
1
2
CD  
STANDBY/ON  
KEY CONTROL  
NORMAL  
DOWN  
MIC 1  
UP  
POWER  
ON OFF  
NORMAL PBC OFF  
3
CD  
CD  
RETURN  
6
7
PLAY & EXCHANGE  
8
MIC 2  
MIC 3  
DIGITAL ECHO  
VIDEO INTRO  
BOOK DIGEST  
9
16  
17  
14  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
10  
12  
SUBTITLE  
PREV  
PHONES  
15  
11  
Left front panel of the player  
Center front panel of the player  
(Controls marked (R) have equivalents on the remote control.)  
13  
CD1 to CD3 trays  
/
1
(STANDBY/ON) button (R)  
Turns the player on or to STANDBY.  
STANDBY indicator (Red)  
Used to load discs. To insert/remove discs, press the 0 (OPEN/  
CLOSE)buttonlocatedattherightofthetraycorrespondingtodisc  
number.  
2
14  
VIDEO INTRO button (R)  
Lights when the POWER ON/OFF button is depressed and the  
Applies to Video CD and SVCD discs only. The introductory  
several seconds of tracks on a disc are displayed on the television  
screen in order to present the contents of the disc.  
SUBTITLE button (R)  
Effective only when playing back an SVCD disc. SVCD discs may  
have up to four subtitles which you can select to see on the TV  
screen (as an optional feature). Pressing this button cycles the  
subtitles as shown below.  
player is in standby mode.  
3
VOCAL EFFECT button (R) with indicator (Green)  
Selects the vocal effect mode for the microphone inputs (1 through  
3). Pressing this button cycles the modes as shown below.  
HARMONY CHORUS FLANGE OFF  
DOLBY SURROUND button (R) with indicator (Green)  
Selects the Dolby surround mode. See page 10.  
MPX button (R) with indicator (Green)  
15  
4
5
Selects the audio channel(s) of a disc to be monitored. See  
“Playing a multiplex sound CD” on page 15.  
POWER ON/OFF button  
Turns the power to standby or completely off.  
PLAY MODE switch  
Switches between the NORMAL and PBC modes. It only affects  
Video CD and SVCD discs with PBC function.  
NORMAL: Allows use of the Playback Control (PBC) function.  
PBC OFF: Inhibits the PBC function.  
KEY CONTROL buttons (R) with indicator (Green)  
Transposes the music key.  
Subtitle 1 Subtitle 2 Subtitle 3 Subtitle 4 OFF  
Display window  
Shows information about the status of operation.  
BOOK DIGEST button (R)  
Displays video segments you marked with the Bookmark function.  
See page 17.  
16  
17  
6
7
8
Right front panel of the player  
0 (OPEN/CLOSE) buttons (CD number 1 to 3)  
18  
Used to open and close disc trays 1 to 3 respectively. When, after  
openingtheCD1tray,another0(OPEN/CLOSE)buttonispressed,  
the CD1 tray is first closed, then the other CD tray selected is  
opened.  
DOWN button: used to flatten by a half tone.  
NORMAL button: returns to original key.  
UP # button:  
used to sharpen by a half tone.  
9
DIGITAL ECHO knob  
Adjuststhedegreeoftheechoeffectforthemicrophone(1through  
3) voice.  
MIC 1 to MIC 3 knobs  
Adjusts volume of the microphone corresponding to MIC number.  
PHONE jack  
CD1 through CD3 buttons (R) with indicators (Green)  
Plays the disc of the number indicated on the button. As soon as  
the disc begins playing, the indicator blinks.  
RETURN button (R)  
Utilized for operation with the PBC function. This button is used to  
return to a menu screen during play.  
19  
20  
10  
11  
Used for connecting stereo headphones. The volume is set to a  
predetermined level and is not adjustable.  
MIC jacks (1 through 3)  
Used for connecting microphones (1 through 3). The jacks corre-  
spond to MIC 1 to 3 volume knobs located above.  
21 8 (PAUSE)/STILL button (R)  
Temporarily suspends playing. Video motion freezes and audio  
reproduction stops. Pressing the button repeatedly advances the  
picture frame-by-frame. (Video CD and SVCD only)  
12  
BOOKMARK button (R) with indicator (Green)  
Places a “bookmark” at video segments you want to find later for  
almost instant replay. See page 17.  
22  
23  
B. SEARCH button (R) with indicator (Green)  
Retrieves video segments which you marked with a bookmark.  
See page 17.  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OVERVIEW OF CONTROLS  
VCD  
TV  
/
/
DOLBY  
SURROUND  
V.EFFECT  
MPX  
V.REPLACE  
CD1  
The controls with identical names on the player and on the remote  
control have the same function and are used in the same manner.  
31  
33  
KEY CONTROL  
ON SCREEN  
CD3  
32  
34  
CD2  
SELECT  
18  
19  
1
2
3
4
5
6
7
SLOW  
CD3  
CD2  
CD1  
8
26  
35  
37  
9
RANDOM PROGRAM CANCEL  
VIDEO  
B.MARK  
20  
STILL 21  
10  
36  
38  
INTRO HIGHLIGHT B.DIGEST B.SEARCH  
PROGRAM  
27  
+10 28  
BOOKMARK  
B.SEARCH  
22  
23  
29  
30  
1
5
9
2
6
3
7
4
8
SELECT  
25  
NEXT  
DESIGNED BY JVC  
24  
39  
43  
ATIME  
10  
+10  
REPEAT SUBTITLE  
40  
SHIFT  
TV/VIDEO  
TV ch  
TV VOL  
44  
41  
42  
RM-SXLMV777U  
MULTI BRAND REMOTE CONTROL  
24 4 / ¢ PREV / NEXT buttons (R)  
During operation with the Playback Control function  
Invokes previous or next screen.  
During operation without the Playback Control function  
Used to skip track(s) forward or backward from the current track  
being played, or to shift the playing location backward or forward  
quickly.  
Jog/Shuttle dial  
Used to play forward or backward quickly.  
25  
26  
Number keys (1 to 10) (R)  
SLOW button  
Starts slow-motion playback.  
1 / ¡ MANUAL SEARCH button  
34  
35  
Used to specify a track number for playing or programming.  
To select a number between 1 and 10, press the corresponding  
keyforthenumber. Toselectanumberhigherthan10, usethe+10  
key. The maximum number you can specify is 99.  
See “Using number keys” on page 7 for the examples.  
These keys are also used to select a menu item number. See also  
“Operation of Playback Control function” on page 21.  
PROGRAM button (R)  
Any desired sequence of tracks can be programmed with the  
number keys and the +10 button. (On the remote control use +10)  
The program button cannot be used while the Playback Control  
function is activated.  
Shifts the playing location backward and forward quickly. Holding  
down the button causes it to go much faster.  
RANDOM button  
36  
37  
Changes the disc track program to a random sequence from disc  
1 through 3 respectively.  
CANCEL button  
Cancels the latest track you have programmed. The latest pro-  
grammed track is canceled whenever you press this button. Also  
used to cancel a bookmark.  
27  
28  
38  
39  
HIGHLIGHT button  
Applies to a video CD and SVCD discs to see highlights of a track.  
Displays the first several seconds of each of nine equal-time  
segments of the track.  
+10 button (R)  
Used when specifying a number which is higher than 11. See  
26 Number keys” above and “Operation of Playback Control  
ATIME button  
function” on page 21.  
Used to play back a disc track from the desired time. See page 14.  
29 7 (STOP) button (R)  
40 REPEAT button  
Stops play.  
Repeats a track or inserted discs from 1 to 3.  
SHIFT button  
Used together with other keys for various functions. See page 11.  
TV/VIDEO button  
Sets the input mode of the TV. Also used to preset the remote  
controlunit, tocontrolsomefunctionsonyourTVset. Seepage11.  
TV ch – / TV ch + keys  
Changes the television channel.  
TV VOL + / TV VOL – keys  
3 (PLAY)/SELECT button (R)  
30  
41  
Starts to play the disc.  
42  
Remote control unit  
31  
/
/
VCD  
/TV  
button  
Turns the player on and to STANDBY.  
When pressed after you hold down the SHIFT button, turns the TV  
on or off.  
V.REPLACE button  
Activates the vocal replace function, inserting your voice in place  
of the disc vocals.  
43  
44  
32  
33  
Turns the TV volume up or down.  
ON SCREEN button  
Controls whether or not control and operation status are displayed  
on the television screen or monitor.  
Page 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Now you can play a  
variety of discs!!  
Overview of the two play modes  
Display window  
The player has two play modes for Video CD and SVCD discs. These  
are selected by the PLAY MODE switch on the left side of the front  
The display window indicates many aspects of control and operation  
status.  
4
panel.  
NORMAL PBC OFF  
NORMAL:  
PBC OFF:  
Allows use of the Playback Control (PBC) function.  
Inhibits the PBC function.  
1
2
5
3
It only affects Video CD and SVCD discs with PBC function.  
1
Shows the disc number being played.  
2
Showsmainlythetotalnumberoftracksandthetracknumberbeing  
played.  
Triple disc tray usage  
3
Mainly shows the cumulative time (minutes and seconds) of the  
track when the player is playing. It also shows the total time of the  
disc for about ten seconds after the player stops playback, or  
finishesreadingthediscinformationwhenadischasbeeninserted.  
Shows the type of disc being played.  
Uptothreediscscanbeloadedintheplayer. Youmayinsertadiscinto  
any of the disc trays 1 through 3.  
If you want to play only a specified disc, press the corresponding CD  
1, 2 or 3 button located to the right of the 0 (OPEN/CLOSE) button.  
4
5
Each indicator in this area lights when the corresponding function  
is activated.  
When three discs are inserted, basic order of playing is as follows.  
Pressing CD 1: CD 1 CD 2 CD 3 STOP  
Pressing CD 2: CD 2 CD 3 CD 1 STOP  
Pressing CD 3: CD 3 CD 1 CD 2 STOP  
Preparation for playing  
Turn on the television set, amplifier or receiver to which the player  
is connected. Then set the channel and modes properly to accept  
the player’s output signal.  
CD3  
CD2  
CD1  
CD  
CD  
3
CD  
CD  
PLAY & EXCHANGE  
CAUTION  
Setthesoundvolumeofthetelevisionset, amplifierorreceiver  
to which the player is connected to a reasonable level before  
starting playback.  
Press the POWER ON/OFF button.  
POWER  
ON OFF  
Press the  
/
button on the front panel or the VCD  
/
(TV  
/
) button  
on remote control. The STANDBY indicator goes out.  
VCD  
TV  
/
/
/
or  
STAND/ON  
(Remote control)  
The display window shows the initial information as shown below.  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
If the PBC function is activated, the display window shows "Pb"  
and the menu is displayed on the television screen. See page 21  
for the "operation of PBC function".  
If the PBC function is not activated, the player starts playback from the  
first track of the disc.  
Inserting/removing disc(s)  
Press the 0 (OPEN/CLOSE) button (1 through 3) to open the disc  
tray. Then place the disc in the round recess of the tray with label  
side up. To close the tray, press the 0 (OPEN/CLOSE) button  
again.  
For individual track selection, use the number keys (see the  
explanation below) or the 4 / ¢ buttons.  
During playback, the display window shows the disc number and  
the track number being played.  
If you press the 0 (OPEN/CLOSE) button of the disc which is playing,  
the player stops and then opens the tray.  
If you press the 0 (OPEN/CLOSE) button of a disc that is not being  
played, you can change discs without stopping play.  
When you press 3 button during play, the disc will restart from the  
beginning of the track.  
CD3  
CD2  
CD1  
Using number keys  
IfthePBCfunctionisnotactivated, youcanselectatracknumber  
by using the numeric keys.  
On the player .................... 1 to 10 and +10 key  
Example: For number 5, press 5. For number 15, press +10, then 5.  
For number 20, press +10, then 10. For number 32, press +10 three  
times, then 2.  
Note  
When loading a disc in the disc tray, be sure to position the disc  
inside the recess. Otherwise, the disc will be damaged when the  
disc tray is closed, and the disc cannot be removed from the unit.  
1
2
3
4
5
6
7
8
9
CD  
10  
Tray  
+10  
CORRECT  
INCORRECT  
On the remote control ..... 1 to 10 and +10 key  
Select numbers as described above.  
Starting to play disc(s)  
1
5
9
2
6
3
7
4
8
Press the 3 (PLAY)/SELECT button. The player starts to play  
from the disc indicated in the display window.  
Or, press one of the CD 1 through 3 buttons to start to play the  
corresponding disc.  
10  
+10  
SELECT  
or  
Note  
Whenyouselectthetrackusingthenumberkeys, thetrackwillstart  
playing without pressing 3 (PLAY)/SELECT button.  
(Remote control)  
CD3  
CD1  
CD2  
CD3  
CD2  
CD1  
or  
(Remote control)  
Page 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Stopping play  
Manual search  
Press the 7 (STOP) button to stop play at any time.  
During play, you can search the disc position by using the shuttle  
dial, or 4 / ¢ buttons on the player or 4 / ¢ buttons on the  
remote control unit.  
Rotating the shuttle dial to the right causes the disc to play  
forward quickly. Rotating it to the left causes it to play backward  
quickly.  
or  
(Remote control)  
Pausing play  
BOOKMARK  
B.SEARCH  
Press the 8 (PAUSE)/STILL button to temporarily suspend play.  
STILL  
or  
(Remote control)  
Notes  
Holding down the 4 / ¢ buttons on the player or the 1 / ¡  
buttonsontheremotecontrolunitcausesthedisctoplayforward  
or backward quickly.  
Continuing to hold down the buttons causes it to search much  
faster.  
When the 8 (PAUSE)/STILL button is pressed once, “PAUSE”  
appears on the television screen, the video motion freezes and the  
sound is turned off. The still picture advances frame-by-frame each  
time the 8 (PAUSE)/STILL button is pressed. This frame-by-frame  
function is available only for Video CDs and SVCDs.  
To release the pause, press the 3 (PLAY)/SELECT or blinking CD  
1 through 3 button.  
2-1  
1:30  
B 3 3 – – – E M.SEARCH  
During “PAUSE” the time counter on the display will blink.  
(Remote control)  
Skipping the track  
(Television screen)  
IfthePBCfunctionisnotactivated, youcanskiptrack(s)byusing  
the 4 / ¢ buttons during play.  
Notes  
In some circumstances, this function is not available when the PBC  
function is activated.  
Pressing the 4 button skips the current track backward, while  
pressing ¢ skips forward.  
The angle at which you hold the shuttle dial determines the manual  
search speed.  
PREV  
NEXT  
or  
(Remote control)  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Slow-motion playback on the remote  
control unit  
Setting TV TYPE  
To playback SVCD discs which are recorded for wide-screen televi-  
sions correctly, select the TV TYPE to match your television.  
Press the SLOW button to play in slow-motion. By pressing the  
SLOW button consecutively, the playback speeds are cycled as  
shown below.  
Operation  
1. While the player is in stop mode, press and hold the  
RETURN button until the following display appears on the  
television screen.  
SLOW  
(Remote control)  
RETURN  
TV TYPE  
PLAY. NORMAL  
STOP. WIDE  
1/4  
1/8  
1/16  
Normal  
Note  
This function can only be used when playing a video CD or SVCD.  
2. If your television is a normal television, press the 3 (PLAY)/  
SELECT button of the player to select NORMAL.  
If your television is a wide-screen television, press the 7  
(STOP) button of the player to select WIDE.  
Using stereo headphones  
The following display appears.  
Connecting stereo headphones  
Connect stereo headphones to the PHONES jack at the lower-left of  
the front panel. The volume level is fixed and cannot be adjusted.  
TV TYPE  
PLAY. OK  
PHONES  
STOP. CANCEL  
3. Press the 3 (PLAY)/SELECT button to complete the setting.  
Pressing the 7 (STOP) button returns to the previous display  
for selection.  
Notes  
The TV TYPE setting is effective for SVCD discs recorded for wide-  
screen television.  
The initial setting is NORMAL.  
Once the TV TYPE is set and memorized, it does not disappear by  
turning the player to standby mode or completely off.  
Page 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Selecting the Dolby Surround mode  
To adjust the output balance of speakers  
You can enjoy the surround sound with discs bearing the mark  
*.  
1. Set the Dolby Surround mode to any one of NORMAL, WIDE,  
PHANTOM and 3 STEREO.  
2. In stop mode, press the SUBTITLE button for two seconds or  
longer on the player repeatedly until the following display  
apears on the television screen.  
Preparation  
IfyoursystemisreadyfortheDolbyProLogic,maketheconnection  
between the player and your amplifier/receiver correctly according  
to “Basic connections” on page 2.  
PROGRAMMED SONGS  
Even if your audio system is for a normal stereo reproduction,  
including a stereo amplifier/receiver and two speakers, you can  
enjoy the pseudo-surround sound with 3D Phonic mode.  
CENTER  
/
SURROUND CH  
LEVEL ADJUSTMENT  
The channel from which the  
test tone is output  
TEST TONE  
L
CH  
CENTER  
SURROND  
CH  
CH  
0
0
Operation  
Output level  
To select the Dolby Surround mode, use the DOLBY SURROUND  
button. Pressing this button cycles the modes as shown below.  
(Television screen)  
The test tone is output from speakers in the following order.  
NORMAL  
WIDE  
(Pro Logic)  
PHANTOM  
(Pro Logic)  
(Pro Logic)  
Front-left  
(L CH)  
Center  
(C CH)  
Front-right  
(R CH)  
OFF  
3D Phonic  
3 STEREO  
Rear  
(S CH)  
When any mode but OFF is selected, the DOLBY SURROUND  
button lights.  
See whether you hear the test tone from each speaker in the  
same level at the listening position.  
Select the mode depending on your system configuration.  
3. If any adjustment is necessary, press the DOLBY SURROUND  
button to select the channel (CENTER or SURROUND) to be  
adjusted.  
NORMAL (Pro Logic):  
Selectthismodewhenthecenterspeakercannotreproducethe  
bass better than the front speakers. The bass portions of the  
center channel signals are output through the front speakers.  
The selected channel turns yellow.  
4. EachpressoftheUP(#)buttonontheplayerorremotecontrol  
unit increases the output level up to +10 dB.  
WIDE (Pro Logic):  
Select this mode when the center speaker can reproduce the  
bass better than the front speakers. All signals of the center  
channel are output through the center speaker.  
Each press of the DOWN ( ) button on the player or remote  
control unit decreases the output level up to -10 dB.  
5. Pressing the SUBTITLE button on the player or remote control  
unit completes the adjustment.  
PHANTOM (Pro Logic):  
Select this mode when you do not use a center speaker. The  
center speaker channel signals are output through the front  
speakers.  
Thesettingismemorizedandwillnotdisappeareveniftheplayerturns  
to the standby mode or completely off.  
When setting the Dolby Surround mode to PHANTOM, CENTER  
cannot be adjusted.  
3 STEREO:  
Select this mode when a center speaker is connected without  
rear speakers.  
When setting the Dolby Surround mode to 3 STEREO, SURROUND  
cannot be adjusted.  
3D Phonic:  
Select this mode when reproducing the surround sound with  
only two front speakers. It gives you very realistic surround  
effect as if the sound is reproduced through the Dolby Sur-  
round decoder.  
This mode is the result of research on sound localization  
technology carried out at JVC for many years and make it  
possible to reproduce the surround sound with only two front  
speakers.  
*
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic",  
and the double-D symbol are trademarks of Dolby Laboratories.  
Page 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Using the remote control  
Using the SHIFT button on the remote  
control unit  
Presetting the remote control to operate  
your own TV  
You can control other functions with the remote control, simply by  
pressingabuttonwhileholdingdowntheSHIFTbutton. Someofthese  
functions are useful for Karaoke and Video CD playing, others for  
You can use the player’s remote control unit to control some functions  
on your TV set (e.g., turning the TV on and off, adjusting volume, or  
selecting channels). First, though, you must preset the remote control  
to make it compatible with your TV.  
controlling the TV.  
SHIFT  
Operation  
1. Check the Preset Code Table (page 12) to determine the two-  
digit brand code number for your TV.  
2. While holding down the TV/VIDEO button on the remote con-  
trol, press the number keys to insert the two-digit brand code  
number. (For example, if the code number is "28", press the  
number key 2, then 8. If the first digit is a "0", press 10. Thus,  
if the code number is "09", press the number key 10, then 9. If  
the code number is "10", press the number key 1, then 10. If  
it is "20", press the number key 2, then 10.)  
7 SHIFT button functions to control the TV  
SHIFT + VCD  
/
Turns the TV on and off  
SHIFT + A TIME TV MUTE (Mute the TV sound)  
SHIFT + 1 TV Channel 1  
Notes  
Before the remote control unit leaves the factory, the brand code  
number is set as No. 01 (JVC).  
Depending on your television set’s age and other factors, brand  
code numbers may be different from those shown in the table. In  
such a case, try out other codes until you find one that corresponds  
to your television.  
SHIFT + 2 TV Channel 2  
SHIFT + 10 TV Channel 0*  
SHIFT + REPEAT 1 - (The first digit of a TV Channel number 10  
to 19. Push a number key to insert the second digit.)*  
3. While still holding down the TV/VIDEO button, press the 7  
SHIFT + SUBTITLE 2 - (The first digit of a TV Channel number  
20 to 29. Push a number key to insert the second digit.)*  
(STOP) button on the remote control.  
TV/VIDEO  
SHIFT + +10 -/- - (To change a one - digit or to change a two -  
digit TV channel number, using a number key.)*  
+
SHIFT + B. SEARCH ENTER (Push after choosing a channel.  
This function registers the channel you have chosen.)*  
4. The TV is turned off if the code number is correct. Repeat the  
procedure from the beginning if you weren’t successful the  
first time.  
Note  
The asterisk * indicates that these operations do not work for some  
manufacturers’ television sets.  
Page 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
Preset code table  
No.  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
Television manufacturer  
JVC  
PANASONIC  
SONY  
SHARP  
TOSHIBA/BEIJING/CHANGHONG  
MITSUBISHI/CHANGHONG  
HITACHI  
SANYO  
FUNAI  
AIWA  
DAEWOO  
SAMSUNG  
LG (GOLDSTAR)  
THOMSON  
FERGUSON  
PHILIPS/TCL/CHANGHONG  
GRUNDIG  
ITT  
MIVER  
FINLUX  
NOKIA  
NEC  
JINXING/PEONY1  
PEONY2  
PEONY3/CHANGHONG  
KONKA  
PEIJIN/NOBLEX  
TCL  
Page 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Various functions to  
enhance your enjoyment  
To stop the program playback, press the 7 (STOP) button. Press-  
Display of operations status  
ing the 3 (PLAY)/SELECT button again causes the player to start  
playing from the next programmed track.  
Preparation  
This function is controlled by the remote control.  
or  
Operation  
Press the ON SCREEN button on the remote control. By pressing  
the ON SCREEN button, the following information may be easily  
and quickly displayed or removed from the television screen.  
(Remote control)  
Time, Echo effect, Key control, Program, Repeat, Random, Multiplex-  
ing, Vocal effect, DOLBY SURROUND, Vocal replace, Bookmark, etc.  
Canceling a programmed track  
Operation  
PROGRAMMED SONGS  
2-1  
1:30  
Therearetwocancelingfunctions(cancelingthelastprogrammed  
track and canceling the current track).  
ON SCREEN  
To cancel the last programmed track, press the CANCEL  
button on the remote control and the last programmed track  
will be canceled. This can be done both in playback and stop  
modes.  
(Remote control)  
(Television screen)  
PROGRAMMED SONGS  
2-1  
2-2  
2-3  
2-4  
2-5  
3-1  
1-1  
1-2  
1-3  
Programming the track sequence you want  
The number located lowest is the  
last track programmed.  
Preparation  
It is not possible to enter programming mode during play. If playing,  
stop the player with the 7 (STOP) button.  
(Television screen)  
Operation  
1. Press the PROGRAM button to enter the programming mode.  
PROGRAM is displayed in the display window.  
To cancel the current track (during playback):  
* press the 7 (STOP) button to stop playback. The next press  
of the 3 (PLAY)/SELECT button will start playback from the  
next programmed track.  
PROGRAM  
PROGRAM  
or  
* press the ¢ button to skip to the next programmed track.  
Note  
To verify the tracks you programmed, stop the player and see ON  
SCREEN information.  
(Remote control)  
2. Specify the disc by a CD (1-3) button and then the track by the  
number keys. You can program up to nine tracks by repeating  
this procedure.  
3. To play the programmed tracks press the 3 (PLAY)/SELECT  
button.  
Clearing a program  
To delete all programmed tracks you have entered, press the 7  
(STOP) button and then the PROGRAM button while the player is  
in stop mode. “PROG OFF” will be displayed on the television  
screen.  
Notes  
The track number playing, next track programmed, and number of  
programmed tracks are displayed from the left-top of the television  
screen. You may use the ON SCREEN button to delete this  
information.  
PROGRAM  
PROGRAM  
or  
Once the programmed track is played, it is deleted from the  
program.  
You may also program additional tracks during the program play-  
back as long as the number of the programmed tracks does not  
exceed nine.  
(Remote control)  
Page 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
To cancel the random playback, press the RANDOM button again  
Repeating tracks  
after stopping the player.  
RANDOM  
It is possible to repeat playback of all discs or only a single track.  
Preparation  
This function is controlled by the remote control.  
(Remote control)  
Note  
Operation  
Random is not effective in program mode.  
By pressing the REPEAT button on the Remote Control, REPEAT  
modes are cycled as shown below.  
REPEAT  
Playing back a track from the desired time  
All discs  
You can play back a disc track from the desired time.  
Current track  
(Remote control)  
(Display window)  
Operation  
While playing back the desired track, operate the following  
procedures.  
REPEAT ALL  
(All discs)  
REPEAT1  
(1 track)  
REPEAT OFF  
1. Press the ATIME button on the remote control.  
(Television screen)  
ATIME  
Notes  
When playing a programmed sequence of tracks, only one track  
repeat is available.  
TheRepeatfunctionisnotavailablewhenaVideoCDorSVCDdisc  
withPBCisinsertedandthePLAYMODEswitchissettoNORMAL.  
Only REPEAT ALL is available when the player is in RANDOM  
mode.  
(Remote control)  
2. Enter the desired time by pressing the corresponding number  
keys from left to right digits.  
“10” button is used for “0” entry.  
You cannot repeat the segment between bookmarks.  
1
2
3
4
5
6
7
1
5
9
2
6
3
7
4
8
Randomly playing tracks  
8
or  
Preparations  
9
This function is controlled by the remote control.  
This function plays tracks randomly from one disc.  
This function is available while the player is in stop mode.  
10  
+10  
10  
+10  
(Remote control)  
Operation  
Press the RANDOM button and random playing will start.  
3. Press the 3 (PLAY)/SELECT button.  
RANDOM  
SELECT  
or  
(Remote control)  
(Remote control)  
(Display window)  
The disc will start playback from the specified time.  
To stop the random playback, press the 7 (STOP) button.  
For example, if you want to play back the disc from “05m06s”,  
press the following buttons.  
ATIME 5 10 6 3  
or  
Note  
(Remote control)  
Some discs may not be played back from the specified time  
precisely.  
Page 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Playing a multiplex sound CD  
Viewing the VIDEO INTRO  
This function is used for multiplex sound discs.  
Preparation  
See manuals attached to discs for detail information.  
When you play a Video CD or SVCD with the Playback Control  
function, the PLAY MODE switch should be set to PBC OFF.  
Operation  
By pressing the MPX button consecutively, channel multiplexing  
modes are cycled as shown below.  
Operation  
1. Play the disc you want to see a digest of.  
2. Press the VIDEO INTRO button on the player or the remote  
control just after starting disc play. Then, the player starts to  
display in sequence the first several seconds and track num-  
bers of all tracks on the disc.  
MPX  
MPX  
or  
VIDEO  
INTRO  
VIDEO INTRO  
(Remote control)  
or  
NORMAL  
(left-channel/  
right-channel)  
L-CH MONO  
R-CH MONO  
(Remote control)  
3. To select a track during the video intro mode, press the  
number key corresponding to the item number on the televi-  
sion screen.  
(Television screen)  
When L-CH MONO or R-CH MONO is selected, the MPX button on  
the player lights and the display indicates MPX L or MPX R  
respectively.  
VIDEO INTRO  
1
4
7
2
5
8
3
6
9
* When playing back an SVCD;  
STEREO 1  
STEREO 2  
MONO 1  
MONO 2  
MONO 4  
MONO 3  
(Television screen)  
(Television screen)  
Note  
The Video intro function is not available in the Random mode.  
WhenanyofMONO1through4isselected, theMPXbuttonlights.  
Note  
Programming during VIDEO INTRO  
Note that you can hear no audible sound at the STEREO 2, MONO  
3 and MONO 4 positions if no audio is recorded on STEREO 2.  
Operation  
1. Stop play.  
2. Press the PROGRAM button so that PROGRAM is lit in the  
display.  
3. Press the disc button you want to play, and enter 1 on the  
number keys.  
4. Press the 3 (PLAY)/SELECT button and then, after the disc  
has started to play, press the VIDEO INTRO button.  
5. The player starts to display in sequence the first several  
secondsandtracknumbersofalltracksonthedisc. Selectthe  
numbers you want to program. You can program nine tracks.  
6. Press the 3 (PLAY)/SELECT button to play.  
Page 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Viewing the highlights  
This function is used for a movie Video CD or SVCD.  
Preparations  
When you play a Video CD or SVCD with the Playback Control  
function, the PLAY MODE switch should be set to PBC OFF.  
This function is controlled by the remote control unit.  
Operation  
1. Start playing the track you want to see the highlights of.  
2. After the track begins to play, press the HIGHLIGHT button on  
the remote control.  
HIGHLIGHT  
HIGHLIGHT  
1
4
7
2
5
8
3
6
9
(Remote control)  
(Television screen)  
3. To select one of the nine segments, press the number key (1  
to 9) of the segment which you want to play.  
The segment will start from several seconds before the shown  
time below each segment.  
Notes  
The segments are each of nine equal-time divisions of the track.  
Nine different highlights are displayed for one minute.  
If no number key is pressed for a minute after the Highlight view  
appears on the screen, the screen is replaced with the Highlight  
view of the next track.  
While in VIDEO INTRO or HIGHLIGHT, sometimes the image is  
partiallydistorted. Thissymptomiscausedbynoiseinthediscitself  
or incorrect manufacturing, not by a malfunction of the player.  
Page 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Playback with the  
Bookmark function  
Using the B. SEARCH button  
Marking segments for later viewing with  
the Bookmark function  
7 With PBC off  
1. Press the B. SEARCH button. The B. SEARCH light will flash  
on and off, indicating the player is in the Bookmark Search  
mode.  
The Bookmark function lets you mark segments of a Video CD or  
SVCD, sothatyoucanhavealmostinstantplaybackofdesiredscenes  
later. You can mark segments on up to ten discs, with a maximum of  
nine segments per disc.  
B.SEARCH  
BOOKMARK  
or  
Evenifyoutakethediscoutoftheplayer, itsbookmarkswillstaystored  
for later use, until you erase them.  
B.SEARCH  
(Remote control)  
Operation  
While playing the disc, press the BOOKMARK button at the  
segments you want to mark for later playing. Bookmark numbers  
appear on the television screen and the BOOKMARK indicator on  
the player flashes.  
2. Press the number key (1 to 9) which corresponds to the  
number of the segment where you want to start play. While  
playing the disc, you can also use the 4 or ¢ button to  
select the desired bookmark number.  
B.MARK  
Note  
BOOKMARK  
or  
To exit the Bookmark Search mode and return to regular viewing,  
press the B. SEARCH button again.  
B.S
(Remote control)  
7 With PBC on  
Notes  
1. PresstheB. SEARCHbuttontoenterBookmarkSearchmode.  
If you press the button while playing, the player will stop and  
then enter Bookmark Search mode.  
The Bookmark function works only with Video CDs and SVCD.  
The Bookmark function is most easily used when the player is in  
PBC OFF mode.  
WhenyoubeginmarkingsegmentsineitherNORMALorPBCOFF  
mode, all subsequent markings and searches for that disc must be  
done in the same mode.  
B.SEARCH  
BOOKMARK  
or  
B.SEARCH  
(Remote control)  
Using the BOOK DIGEST button  
2. Press the number key (1 to 9) which corresponds to the  
number of the segment where you want to start play.  
1. Press the BOOK DIGEST button while playing the disc.  
BOOK DIGEST  
B.DIGEST  
Note  
or  
The Bookmark Search function ends automatically, and the player  
returns to regular viewing.  
(Remote control)  
2. The marked segments will be highlighted on the screen, with  
their respective numbers (maximum of nine).  
3. Press the number key (1 to 9) which corresponds to the  
number of the segment where you want to start play.  
1
2
3
4
5
6
7
8
9
10  
+10  
Note  
The Bookmark Digest function is not available in PBC function.  
Page 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Canceling individual bookmarks  
Canceling all bookmarks on individual  
discs  
7 Canceling bookmarks set in PBC OFF mode  
[Method A]  
7 Canceling bookmarks on a disc in the player  
You can cancel bookmarks on the currently selected disc in the  
player using the 8 (PAUSE)/STILL button on the player.  
1. In PBC OFF mode, start playing the segment whose bookmark  
you want to cancel.  
2. Press the CANCEL button on the remote control unit. The  
bookmarkforthesegmentimmediatelyprecedingthepartyou  
are playing will be canceled.  
In stop mode, press the 8 (PAUSE)/STILL button on the player  
until bookmark information on the television screen stops  
blinking.  
CANCEL  
PROGRAMMED SONGS  
STILL  
DISC: 1  
BOOKMARK  
CANCEL  
(Remote control)  
Note  
When you cancel a bookmak number, all subsequent bookmark  
numbers change, moving up one level to fill the gap you made.  
(Television screen)  
[Method B]  
The total number of  
discs with bookmarks  
1. Start playing in NORMAL mode.  
2. Press the CANCEL button on the remote control unit. The  
bookmark with the highest number will be canceled (regard-  
less of the playing position).  
7 Canceling bookmarks on a disc which was played the earliest  
You can cancel bookmarks on a disc you played the earliest  
whether it is in the player or not.  
CANCEL  
In stop mode, press the 7 (STOP) button on the player until  
bookmarkinformationonthetelevisionscreenstopsblinking.  
(Remote control)  
PROGRAMMED SONGS  
DISC: 3  
7 Canceling bookmarks set in NORMAL mode  
BOOKMARK  
CANCEL  
1. Start playing in either NORMAL or PBC OFF mode.  
2. Press the CANCEL button on the remote control unit. The  
bookmark with the highest number will be canceled (regard-  
less of the playing position).  
CANCEL  
(Television screen)  
The total number of  
discs with bookmarks  
(Remote control)  
Note  
You can also cancel all bookmark information by setting the  
POWER button to OFF.  
Page 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Using a microphone  
Using a wired microphone  
Adjusting music key  
Operation  
Press the KEY CONTROL buttons ( or #) to change the key in  
which the music plays. To return the music to its original key,  
press the NORMAL button.  
UptothreemicrophonescanbeconnectedtotheMICjacksonthefront  
panel.  
You can also adjust the music using the remote control unit.  
KEY CONTROL  
DOWN  
NORMAL  
UP  
KEY CONTROL  
or  
(Remote control)  
MIC 1  
MIC 2  
MIC 3  
Notes  
The degree the key has been raised or lowered is displayed on the  
television screen.  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
When the song ends, the key control will return to NORMAL mode  
automatically.  
1. Turn on the microphone switch.  
2. Turn the MIC 1, MIC 2, and MIC 3 knobs clockwise (level up) or  
counterclockwise (level down) as desired.  
Adjusting echo effect  
You can add echo to your voice.  
Turn the DIGITAL ECHO knob clockwise (level up) or counter-  
clockwise (level down) to adjust the echo effect as desired.  
MIC 1  
MIC 2  
MIC 3  
DIGITAL ECHO  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
ATTENTION  
MIN  
MAX  
Whenyouarenotusingthemicrophone, settheMICswitchtoOFF.  
Be sure to remove the microphone  
NotewhenconnectingthesoundoutputtotheinputofaTVorVCR:  
If an excessively strong signal is given to a unit through a micro-  
phone, for example when using Karaoke, it may cause an adverse  
effect such as distorted sound. Lower the sound volume using the  
microphone control.  
Karaoke etiquette  
Think of your neighbors when you are enjoying karaoke music.  
Particularly late at night, the sound you enjoy may reach your  
neighborsmorethanyouexpect. Commonsenseandcourtesyare  
always appreciated.  
Page 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VARIOUS UNIQUE FUNCTIONS  
Vocal replace  
Preparation  
This function is used for multiplex sound discs.  
Operation  
1. Press the V.REPLACE button during play or stop. REPLACE  
will appear on the display window and VO.REPLACE will  
appear on the television screen. When you start singing, the  
disc vocal is removed and your voice is inserted into the  
music.  
V.REPLACE  
(Remote control)  
2. To cancel voice replacement, press the V.REPLACE button  
again.  
Note  
You cannot use the Vocal replace function with a disc that has  
vocals recorded on the left channel.  
Vocal effect  
By pressing the VOCAL EFFECT button, you can apply a vocal effect  
to the microphone input signals. Three effect modes are available;  
HARMONY, CHORUS and FLANGE. The selected mode is shown on  
the television screen, while the VOCAL EFFECT button on the player  
lights when any of the effect modes is selected.  
V.EFFECT  
VOCAL  
EFFECT  
or  
(Remote control)  
Page 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION OF PLAYBACK CONTROL FUNCTION  
Playing Video CDs and  
SVCDs with Playback  
Control function  
This player provides a Playback Control function which utilizes a  
procedure (menu selection) programmed in a Video CD or SVCD. The  
playback operation procedure may differ depending on the disc you  
use.  
Operation  
1. Verify that the PLAY MODE switch is set to NORMAL.  
2. Press the CD (1 through 3) or 3 (PLAY)/SELECT button. The  
playerstartsupthePBCfunction. “Pbisshowninthedisplay  
window. The main menu is displayed on the television screen.  
The Playback Control function provides:  
High-resolution still image display - Super-fine reproduction of still  
images with more than four times the resolution of video tape.  
Menu-driven playback - interactive menus for easy selection of  
tracks.  
CD3  
SELECT  
CD2  
CD1  
or  
Preparations  
A Video CD or SVCD with the Playback Control function is required  
for this operation.  
The PLAY MODE switch must be set to NORMAL.  
The buttons used for operating the PBC function are the number  
keys, the 4 / ¢ PREV/NEXT buttons, 3 (PLAY)/SELECT but-  
ton, and  
RETURN button.  
2-PBC  
PBC  
1
2
3
4
Button functions  
Number keys ............................ Select a specific menu item from the  
(Including +10 button)  
television screen or monitor.  
4 /¢PREV/NEXTbuttons .... Move through menu etc.  
3 (PLAY)/SELECT button ....... When “3” or “SELECT” is displayed  
on the television screen, pressing  
this button jumps to the specific pic-  
ture.  
(Television screen)  
3. To move through the disc menus, press the 4 / ¢ PREV/  
NEXT button.  
PREV  
NEXT  
or  
RETURN button ................ Returns to the menu.  
7 (STOP) button ...................... Stops operations.  
4. When the disc menu you want appears, select an item in the  
menu by using the number keys. The numbers on the number  
keys correspond to the menu item numbers.  
5. To return to a menu press, the  
RETURN button.  
RETURN  
Notes  
Page numbers in the disc menu show that preceding pages exist.  
To move from the current menu, press the 4 / ¢ PREV/NEXT  
button.  
If you have no desire to use the PBC function when playing a disc  
withthePBCfunction,switchthePLAYMODEswitchto"PBCOFF"  
before playing.  
If you switch the mode from NORMAL to PBC OFF while playing  
back a PBC disc, playback will stop. Operate the procedure above  
again from the beginning.  
If you press the number keys directly to select the track before  
playing, you cannot enter PBC mode regardless of the PLAY  
MODE switch setting.  
Page 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION OF PLAYBACK CONTROL FUNCTION  
Video CDs and SVCDs with Playback  
Control function  
Menu-driven playback  
You can interact with the screen using a menu display to select and  
play an entry.  
High-resolution still image display  
You can display high-quality images four times clearer than moving  
pictures.  
What is Playback Control function?  
The Playback Control function, allows you to enjoy menu-driven  
operation and high-resolution still images which have a resolution four  
times greater than moving pictures.  
Example of playback using the Playback Control function  
1
2
3
Menu screen  
3
1
2
Press  
RETURN.  
1
2
3
Moving  
picture  
1
2
1
2
1
2
3
To next screen  
Press  
RETURN.  
Moving  
picture  
Moving  
picture  
Moving  
picture  
Still  
picture  
Still  
picture  
Moving  
picture  
Moving  
picture  
Moving  
picture  
To previous screen  
Press  
RETURN.  
3. When the selection menu is redisplayed after you have played  
your selection, selecting a number again replays its contents.  
(Some discs may show the menu screen several times.)  
AselectionmenuisdisplayedwhenyoustartplayingaVideoCDand  
SVCD disc with the Playback Control feature. The selection menu  
shows a list of numbers for selection. Some discs may show moving  
pictures or a divided screen.  
When  
and  
are shown, pressing “NEXT” or “PREV” can  
change the selection menu.  
1. When a list of numbers is displayed, selecting a number shows its  
contents.  
4. After playback, press  
screen.  
RETURN to go back to the previous  
To stop playback, press 7 (STOP).  
2. When 3” or “SELECT” is displayed on the television screen,  
pressing this button jumps to the specific picture.  
Note  
When a menu is displayed for a long time (about ten minutes), the  
screen background automatically fades out to prevent screen  
burn-in while the setting is suspended.  
Page 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RESTRICTING USE OFYOUR DISCS  
Locking a disc with the  
Read-Protect function  
Locking a disc  
Canceling Read-Protect  
TheRead-Protectfunctionrestrictsviewingofadisc. Onlypeoplewho  
know the code can unlock the disc. You can lock only Video CDs and  
SVCDs (up to ten discs).  
Operation  
1. Place the disc in a tray, then press the CD button (1 - 3) for that  
tray. PROTECT is displayed on the television screen.  
Notes  
CD3  
CD2  
CD1  
You cannot lock a disc while it is playing.  
All Read-Protect operations are performed using buttons on the  
player, not on the remote control.  
Operation  
1. Play the disc for a moment, then press the 7 (STOP) button.  
2. Hold down the 4 PREV (Previous) button on the player for  
more than three seconds. The indication “Loc” in the display  
window will flicker for a moment.  
PREV  
2. Hold down the NEXT button on the player for at least three  
seconds. Thetrackandtimenumbersarenolongerdisplayed.  
NEXT  
3. Press the number key “8” four times. You can now play the  
disc.  
1
2
3
4
5
6
7
8
3. Press the number key “8” four times. The display window  
indicates “Loc.”  
Now the disc cannot be viewed. You can open and close the tray and  
you can turn the player power on and off, but no other functions are  
available for this locked disc.  
9
10  
+10  
Note  
PROTECT is displayed on the television screen.  
Releasing the Read-Protect temporarily  
Cut out the following instructions and keep them separately, to  
ensure privacy.  
Operation  
1. As above, hold down the 4 PREV (Previous) button on the  
player for at least three seconds. The indication “Loc” in the  
display window will flicker for a moment.  
PREV  
2. Press the number key “7” four times. You can now play the  
disc temporarily until you press the 0 (OPEN/CLOSE) button  
for that disc, or until you play another disc. Turning off the  
player does not restore the Read Protect function.  
Page 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIGITAL AUDIO CDs  
Playing Digital Audio CDs  
Playing Digital Audio CDs  
Basically, the operations for Video CDs and SVCDs apply to the Audio  
CDs except for some video-related functions.  
Notes  
The display has no indicator to show disc type.  
The PLAY MODE switch is ineffective for Audio CDs.  
Unavailable functions for Audio CDs  
ThefollowingfunctionsforVideoCDandSVCDdiscsarenotavailable  
with Audio CDs.  
Slow-motion playback  
Frame-by-frame function  
Video intro function  
Highlight function  
Bookmark function  
Page 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AV COMPU LINK REMOTE CONTROL SYSTEM  
AV COMPU LINK remote  
control system  
When you are going to enjoy a disc, you usually have to turn on your  
television, receiverandVideoCDplayerandsetupthesecomponents’  
individually. If, however, the system consists of components which  
support JVC’s AV COMPU LINK remote control system, instead of  
individual setup, simply pressing the 3 (PLAY)/SELECT button allows  
you to enjoy the disc.  
If you connect the Video CD player to a television and VCR via AV  
COMPU LINK as illustrated above, set the VCR’s Remote Control  
Code and Video CD player’s AV COMPU LINK setting as follows.  
• When connecting with VIDEO 1 input terminal of the television:  
Video CD player’s AV COMPU LINK setting: CD 2  
VCR’s Remote Control Code:  
B
• When connecting with VIDEO 2 input terminal of the television:  
Video CD player’s AV COMPU LINK setting: CD 3  
Connection and setup  
VCR’s Remote Control Code:  
A
Using the AV COMPU LINK cable, connect the AV COMPU LINK  
terminals of each component to one another.  
After the connection is done, make the player’s AV COMPU LINK  
setting by the following procedures.  
TV  
1. While the player is in the STANDBY mode, hold down the 7  
/
(STOP) button and press the  
(STANDBY/ON) button.  
Receiver  
Video CD player  
The corresponding CD button (CD1 to CD3) of the selected AV  
COMPU LINK setting blinks.  
If you connect the Video CD player to a television and receiver via AV  
COMPU LINK as illustrated above, set the Video CD player’s AV  
COMPU LINK setting to CD1.  
2. To change the selection, press the 3 (PLAY)/SELECT button.  
Each press of the button cycles the selection as shown below.  
CD 1  
CD 2  
CD 3  
Operation  
You can enjoy pictures and/or sound by just putting the Video CD  
player into play mode. You do not have to operate the TV and/or  
receiver including power switching.  
3. To exit the setting mode, press the 7 (STOP) button to return  
/
totheSTANDBYmode,orpressthe  
to enter the ON mode.  
(STANDBY/ON)button  
Preparation  
Set the POWER switch of each component to ON.  
To AV COMPU LINK (II or EX)  
1. Insert a disc into the Video CD player.  
2. Press 3 (PLAY)/SELECT of the Video CD player.  
SELECT  
TV  
Video CD player  
If you connect the Video CD player to a television via AV COMPU LINK  
as illustrated above, set the Video CD player’s AV COMPU LINK  
setting as follows.  
The following actions are performed automatically:  
• Turning on the power of each component.  
• Setting the source of the television to the external input which the  
Video CD player is connected to.  
• When connecting with VIDEO 1 input terminal of the television:  
CD 2  
• Setting the source of the receiver to the Video CD player.  
• When connecting with VIDEO 2 input terminal of the television:  
CD 3  
To AV COMPU LINK  
(II or EX)  
Notes for connection  
To AV COMPU LINK  
• Connect the AUDIO OUT jacks of the Video CD player to the audio  
input jacks of a receiver which show “DVD”. Otherwise, the system  
will not work correctly.  
• TheremaybenodescriptionaboutconnectionstoaVideoCDplayer  
in the instruction manual of a television or VCR. But a television or  
VCR with AV COMPU LINK terminals which show II can be con-  
nected to a Video CD player.  
TV  
Video CD player  
Video cassette recorder  
Page 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Main specifications  
XL-MV7000GD  
Accessories  
AC power cord ........................................................................... 1  
Audio video cable....................................................................... 1  
Remote control unit (RM-SXLMV777U) ..................................... 1  
Batteries (R6P(SUM-3)/AA(15F)) ......................................... 2  
AC plug adaptor (except People's Republic of China) ............... 1  
AV COMPU LINK cable ............................................................. 1  
Model  
Video CD player  
Playback disc Super VCD  
Video CD  
Digital Audio CD  
Front panel  
color  
XL-MV7000GD  
Gold  
Total harmonic  
distortion  
0.01% (1 kHz)  
90 dB  
S/N ratio  
Frequency  
response  
20 Hz – 20 kHz  
Input terminal Microphone  
5 mV (5.0k)  
Output  
terminal  
Line output  
2.0 Vrms (full scale)  
1.0 Vp-p (75)  
Video output (composite)  
S video output  
Y: Illuminance  
C: Chrominance. burst 0.286 Vp-p (75)  
1.0 Vp-p (75)  
Echoing  
Digital echoing  
AC 115-127/220-240 V  
Selectable with the voltage selector  
16 watts  
6 watts  
Power  
requirements  
50/60 Hz  
Power  
consumption  
In standby mode  
5.3 kg (11.7 lbs)  
Weight  
Dimensions  
(W/H/D)  
435 x 126.5 x 325.3 mm  
17-3/16 x 5 x 12-13/16 inches  
Page 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Troubleshooting  
What appears to be a malfunction may not always be so. Please go through the following list before requesting service.  
Symptom  
Possible cause  
Power plug is disconnected from AC outlet.  
The POWER button is in the OFF position.  
Batteries are exhausted.  
Remedy  
Power does not come on.  
Firmly connect the plug to AC outlet.  
Depress the POWER button.  
Remote control does not work.  
Replace the batteries with new ones.  
The tip of the remote control unit is not pointed at the Use the remote control correctly.  
receiving part of the player.  
No image is displayed on the  
monitor.  
The video cable is not connected.  
The TV is not set in video mode.  
An incompatible disc is loaded.  
No disc is loaded.  
Firmly connect the cable.  
Set the TV in video mode.  
Load a disc compatible with the player.  
Load a disc.  
Playback does not start.  
Disc is loaded upside down.  
Audio cable is not connected.  
Operation of the external amplifier is incorrect.  
Disc is dirty.  
Reload the disc with the label up.  
Firmly connect the cable.  
Speaker does not produce  
sound.  
Operate the amplifier correctly.  
Wipe the disc surface with a soft cloth.  
Correctly connect cables. See page 2.  
Sound is distorted or noise is  
generated.  
Image is garbled.  
Connection is wrong.  
Sound is intermittent.  
Image is garbled.  
Disk is dirty.  
Wipe the disc surface with a soft cloth.  
See page 1.  
Disc is scratched.  
Replace the disc with a new one.  
Disc is warped.  
Disc tray does not come out  
when 0 (OPEN/CLOSE) button  
is pressed.  
Power plug is disconnected from the power outlet.  
Firmly insert the plug into the outlet.  
Operation is not possible.  
Microcomputer malfunctions due to lightning or static Turn the power off, then on again.  
electricity.  
The AV COMPU LINK system  
does not work correctly.  
The player's AV COMPU LINK setting is not correct.  
Make the setting correctly.  
The malfunction may be caused by a device other than the player. Check other devices connected to the player.  
Page 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AC Power Line Instructions (not applicable for Europe, U.S.A., Canada,  
Australia and U.K.)  
IMPORTANT  
BEFORE PLUGGING IN, check that your AC power line  
voltage corresponds with the position of the voltage  
selector switch provided on the outside of this equipment.  
If different, reset the voltage selector switch, to prevent  
damage or risk of fire/electric shock.  
1299RIMMACJSC  
EN, CH  
J
C
V
VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer PWDC 8125 W User Manual
Intellinet Network Solutions Network Router INT 524315 UM 0808 1 User Manual
IOGear Switch GCS1774 User Manual
John Deere Portable Generator HR G1100 User Manual
John Lewis Smoke Alarm SCO5JL User Manual
Kenwood Marine Radio TH 255A User Manual
Kingston Technology Computer Drive 07 16 2009 User Manual
KitchenAid Dishwasher KAD 7 User Manual
KitchenAid Microwave Oven KHMS145KSS User Manual
Kobe Range Hoods Ventilation Hood CH0130SQB User Manual