JVC CD Player XL FZ700 User Manual

&203$&7ꢀ',6&ꢀ$8720$7,&ꢀ&+$1*(5

Introduction

;/ꢀ)=ꢁꢂꢂ%.

Before using for the first time

Basic operations

Various playback patterns

General informations

OPEN/

REPEAT

STANDBY/ON

RANDOM PROGRAM CANCEL

CALL

DISC

DISCSKIP

OPEN/CLOSE

PLAY

DISC

EXCHANGE/DISC SKIP

+10

STANDBY

STANDBY/ON

STOP PAUSE

SKIP

DISC

PLAY

EXCHANGE

XL-FZ700 COMPACT DISC AUTOMATIC CHANGER

RM-SXLFZ700J

REMOTE CONTROL

CD-R/RW PLAYBACK

D CONVERTER

1BIT

,16758&7,216

)RUꢃ&XVWRPHUꢃ8VHꢄ

(QWHUꢀEHORZꢀWKHꢀ0RGHOꢀ1RꢁꢀDQGꢀ6HULDOꢀ1Rꢁꢀ

ZKLFKꢀDUHꢀORFDWHGꢀRQꢀWKHꢀUHDUꢂꢀERWWRPꢀRUꢀ

VLGHꢀRIꢀWKHꢀFDELQHWꢁꢀ5HWDLQꢀWKLVꢀLQIRUPDWLRQꢀ

IRUꢀIXWXUHꢀUHIHUHQFHꢁ

0RGHOꢀ1Rꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

6HULDOꢀ1Rꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ

/97ꢃꢄꢅꢆꢇꢃꢃꢈ$

>-@

Download from Www.Somanuals.com. All Manuals Search And Download.

We would like to thank you for purchasing one of our

JVC products.

Before connecting this unit to the wall outlet, please read

the instructions carefully to ensure that you obtain the

best possible performance.

English

Table of Contents

Introduction

Page 2

If you have any questions, please consult your JVC

dealer.

Precautions......................................................................... 2

About this manual............................................................. 2

Names of buttons.............................................................. 3

Main unit...................................................................................3

Remote control unit.................................................................4

Display window........................................................................4

Before using for the first time

Page 5

Installing the unit............................................................... 5

Connecting to the Analog Output Jacks......................... 5

Connecting to the Digital Output Jack............................ 5

Supplying the power......................................................... 5

To connect the AC power cord of the main unit ...................5

To install the batteries in the remote control unit.................6

COMPU LINK connection.................................................. 6

Basic operations

Page 7

Basic functions for disc playback .................................... 7

Turning on the power of this unit...........................................7

Remote control operation .......................................................7

Inserting and removing discs .................................................7

Playing a disc ...........................................................................8

Stopping playback ...................................................................8

Locating a point to start playback .................................. 9

Skipping to a desired disc during playback (DISC SKIP) ......9

Changing to a desired disc during playback DISC (1-7) .......9

Skipping to a desired track during playback .........................9

Searching for a desired section..............................................9

Specifying a desired track in stop mode..............................10

Changing discs during playback (EXCHANGE)............. 10

Playing tracks in a order of disc/track number............. 10

Various playback patterns

Page 11

Playing tracks in a desired order (Program Play) ......... 11

Playing tracks in a random order (Random Play)......... 12

Playing repeatedly (Repeat Play) ................................... 12

Repeating all the tracks of a disc..........................................12

Repeating one track...............................................................12

General informations

Page 13

COMPU LINK remote control system............................ 13

Care and handling............................................................ 14

Troubleshooting .............................................................. 15

Specifications................................................................... 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Precautions

About this manual

This manual covers the operating instructions for the

compact disc automatic changer XL-FZ700BK.

Load compact discs only

Never insert anything other than compact discs into any

part of the player.

This manual is organized as follows:

The first part, “Introduction”, gives you the precautions

when using this unit, and shows you the names of

buttons on the main unit and the remote control unit.

If a problem persists

If something goes wrong, turn off the power

immediately. If the same problem reoccurs when the

power is turned on once more, turn off the power again

and consult your JVC dealer.

The second part, “Before using for the first time”, tells

you what kind of operations you should do before

playing discs. This part describes where to place the unit

for best results, how to install batteries in the remote

control unit and how to connect this unit to the amplifier/

receiver and other components.

Handling the power cord

When unplugging from the wall socket, always pull the

plug body, never the power cable.

Volume settings

A CD player has almost zero background noise. Because

of this, the technique of listening to the background level

and then setting the volume before the music starts, as

used with analog turntables or tape decks, cannot be

used. If you raise the volume level too high, speaker

damage may result.

The third part, “Basic operations”, describes how to load

discs, and convenient basic functions for playing discs.

The fourth part, “Various playback patterns”, describes

various functions for playing discs.

Condensation

The fifth part, “General informations”, describes the

COMPU LINK remote control system which facilitates

various operations between JVC components, and

explains how to take care of discs.

This part also includes “Troubleshooting”, which tells

you how to check the unit when a malfunction occurs,

and the technical informations regarding this unit.

The CD player uses optical components. If it is moved

from a cold location to a warm one, or is used in a room

subject to excessive humidity or where a fire has just

been lit, condensation could form on the optical

components.

This may prevent the laser beam from being properly

transmitted and thus causes noise or even a

malfunction.

If condensation has formed and the CD player does not

function correctly, we recommend that you leave it

turned on for an hour or two. If at the end of this time the

CD player still does not function properly, please consult

your JVC dealer.

Transporting the unit

When carrying this unit, it is best to avoid either

tilting or turning it upside-down. When you cannot

avoid doing so, please remove the discs first.

Using compact discs

Compact discs are made of plastic and can easily be

damaged. If the disc is dirty, scratched, warped or

otherwise damaged, the digital information may not be

picked up correctly.

Applicable discs

This unit can only be used with compact discs bearing

the marks below. Never use discs of other types.

Recordable

ReWritable

CD-R and CD-RW discs recorded with the Audio CD format

can be played back, though some may not be played back

because of the disc characteristics or recording condition.

NOTE

•

CD-R and CD-RW discs must be finalized.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

English

Names of buttons

Main unit

8 PAUSE button

EXCHANGE/DISC SKIP button

STANDBY indicator

0 OPEN/CLOSE button

3 PLAY button

% STANDBY/ON button

DISC (1-7) buttons

OPEN/CLOSE

PLAY

DISC

EXCHANGE/DISC SKIP

STANDBY

STANDBY/ON

STOP PAUSE

SKIP

DISC

PLAY

EXCHANGE

XL-FZ700 COMPACT DISC AUTOMATIC CHANGER

CD-R/RW PLAYBACK

D CONVERTER

1BIT

Display window

remote sensor

7 STOP button

Carousel

4/¢ SKIP buttons

DIGITAL OUT OPTICAL jack

OUTPUT (RIGHT/LEFT) jacks

COMPU LINK-3

(SYNCHRO) jacks

AC IN connector

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Remote control unit

OPEN/CLOSE button

PROGRAM button

Remote control signal transmitter

% STANDBY/ON button

Turns on the unit or puts it in

STANDBY mode

OPEN/

REPEAT

STANDBY/ON

CALL

REPEAT button

CANCEL button

RANDOM PROGRAM CANCEL

RANDOM button

CALL: displaying program

contents button

DISC 1

DISC 5

DISC 2

DISC 6

DISC 3

DISC 4

DISC (1-7) buttons

DISC 7 DISC SKIP

DISC SKIP button

Track buttons

+10

3: Play button

4/¢: skip buttons

7: Stop button

1/¡: backward/

fast forward buttons

8: Pause button

RM-SXLFZ700J

REMOTE CONTROL

Display window

Disc indicators (1-7)

EXCHANGE indicator

Music calendar

EXCHANGE DISC

REPEAT1

TRACK TOTALTIME

STEP

10 11 12

PROGRAM

RANDOM

13 14 15 16 17 18

Play mode indicators

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

English

Installing the unit

Connecting to the Digital

Output Jack

Best location

Select a location which is level, dry and neither too cold

nor too hot (temperature range 5°C (41°F) to 35°C (95°F)).

Also, avoid dusty locations or any location subject to

vibration.

It is possible to transmit a digital sound signal from this

unit directly to a MD recorder, etc.

NOTES

If interference occurs

• Never connect the digital output cable except to the

digital input jack.

If this unit is placed near a tuner or a radio receiver tuned

to AM frequencies, interference may occur. If this

happens, we recommend either that you move this unit

as far as possible from the tuner or receiver or briefly

turn off the power of this unit.

• An optical digital cord (optional) is required to make

this connection. Refer to the instruction manual of the

MD recorder, etc. for details.

Rear panel of this unit

COMPU LINK

AC IN

DIGITAL

OUT

(SYNCHRO)

OUTPUT

RIGHT LEFT

Connecting to the Analog

Output Jacks

OPTICAL

MD recorder, etc.

Connecting to an amplifier or receiver allows you to

listen to the sound from the speakers.

Connect the OUTPUT jacks of this unit to the line input

jacks of an amplifier or receiver with the supplied audio

cord.

Optical digital cord (optional)

DIGITAL OUT

To digital input jacks

(OPTICAL)

NOTES

Supplying the power

• Never connect the OUTPUT jacks to the PHONO jacks

of the amplifier or receiver. This may cause damage to

the components.

To connect the AC power cord of the

main unit

• Make sure that the same channels are connected

between this unit and the amplifier or receiver: LEFT to

LEFT and RIGHT to RIGHT.

• Do not connect the power plug until all connections are

complete.

The AC power cord is supplied separately and must be

connected to the unit.

• Connect the plugs firmly. Loose connections may cause

noise or malfunction.

Plug the AC power cord into the

AC IN connector of

this unit and connect to the wall outlet after all

connections are complete.

Rear panel of this unit

NOTE

• When using the COMPU LINK Remote Control System

(see page 6), do not connect the power cord to the

SWITCHED AC OUTLET of an amplifier or receiver.

COMPU LINK

AC IN

DIGITAL

OUT

(SYNCHRO)

OUTPUT

RIGHT LEFT

OPTICAL

OUTPUT

Amplifier or receiver

RIGHT LEFT

AC IN connector

Rear panel of this unit

To audio input jacks

COMPU LINK

AC IN

DIGITAL

OUT

(SYNCHRO)

OUTPUT

RIGHT LEFT

OPTICAL

Audio cord

Speaker unit

Supplied AC power cord

To the wall outlet

(to be continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

To install the batteries in the remote

control unit

COMPU LINK connection

JVC’s COMPU LINK Remote Control System provides

unified control over system components connected with

COMPU LINK. Connecting JVC audio components with

the COMPU LINK jacks automatically controls relative

operations between components and facilitates various

operations. With the COMPU LINK connection to an

amplifier or receiver, you can operate XL-FZ700BK with

the amplifier or receiver’s remote control unit.

Synchronized recording is also available with this

feature.

Before operating the remote control unit, install two

batteries.

1While pushing the tab of the rear cover,

remove the rear cover from the remote control

upwardly.

Connecting the COMPU LINK cord

The COMPU LINK-3 (SYNCHRO) jacks are used to output

and input the control signal for the COMPU LINK remote

control system.

COMPU LINK-compatible products are provided with the

jacks marked COMPU LINK-1, COMPU LINK-2 or COMPU

LINK-3, referring to the COMPU LINK version. XL-

FZ700BK is equipped with COMPU LINK-3. You can

connect XL-FZ700BK also to a component with lower

COMPU LINK versions. But, in that case, only the lower

versions’ features will be available.

2Install batteries. Be sure that the batteries are

installed with correct polarity, (+) and (–).

Plug the supplied COMPU LINK cord into the COMPU

LINK-3 (SYNCHRO) jack on the rear panel of XL-FZ700BK.

Plug the other end into the COMPU LINK jack of the other

component. If there are two COMPU LINK jacks, plug it

into either of them.

Connect to the COMPU LINK-3 (SYNCHRO) jack of

another component equipped with the Compu Link

remote control system.

While aligning the end of the rear cover with

the remote control, assemble the rear cover on

the remote control by pushing it downwardly.

Rear panel of this unit

COMPU LINK

AC IN

DIGITAL

OUT

(SYNCHRO)

OUTPUT

RIGHT LEFT

OPTICAL

COMPU LINK cord*

NOTES

Incorrect use of batteries can cause corrosion or damage.

Note the following points to lengthen battery life.

Turntable

Cassette deck

* Only one COMPU LINK cord is supplied.

• Install batteries observing the correct polarity, (+) and (–).

• Do not use new and old batteries simultaneously.

Amplifier or receiver

• Batteries with similar shapes may have different

voltage ratings. Be sure to use the correct batteries.

• Remove batteries from the remote control unit if it will

not be used for a long period of time.

• Do not expose batteries to heat or flame.

Battery replacement

Service life of batteries depends on the condition of use;

standard life is about one year. When the batteries

become weak, the operating distance of the remote

control unit becomes short. If this happens, replace the

batteries R6P(SUM-3)/AA(15F) with new ones.

NOTE

• The lower the temperature, the shorter the battery life.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

English

Basic functions for disc

playback

Turning on the power of this unit

Press the % STANDBY/ON button to turn on this unit.

The STANDBY indicator is turned off and the display is

turned on.

The number written on the carousel corresponds

to the disc number shown on the display

Main unit

Remote control unit

STANDBY

STANDBY/ON

NOTE

• From the second time on, the carousel opens with the

STANDBY/ON

previously played disc on the left-front tray.

Press again to turn off the power and activate the

standby mode. The STANDBY indicator is lit and the

display goes out.

2Press the EXCHANGE/DISC SKIP button on

the main unit or the DISC SKIP button on the

remote control unit to select accessible disc

trays if required.

The power is automatically turned on also by;

• Pressing the 0 OPEN/CLOSE button on the main unit

or the OPEN/CLOSE button on the remote control unit.

The carousel will be opened.

Main unit

Remote control unit

• Pressing the 3 PLAY button on the main unit or

the 3 button on the remote control unit.

The disc that was lastly selected will be played back. If

no disc is set in all the disc trays, “NO DISC” will

appear.

DISC SKIP

EXCHANGE/DISC SKIP

• Pressing the DISC (1-7) button on the main unit or the

remote control unit.

The corresponding disc will be played back.

Each time the button is pressed, the carousel

rotates clockwise by an amount for accessing the

next two disc trays.

NOTES

• A small amount of power (3.0 W) is consumed even in

the standby mode.

• To turn off the power completely, disconnect the power

cord from the wall outlet.

Label

side up

Remote control operation

Point the remote control unit towards the remote sensor

and operate it steadily and carefully. The remote control

unit can be used within a range of about 7 m (23 feet)

from the remote sensor, and at angles of up to about 30

degrees.

3Place one or two discs in the disc tray(s) with

the label side up.

• To insert an 8-cm disc, place it in the inner recess.

Inserting and removing discs

CAUTION

Up to 7 discs can be set on the disc tray carousel.

When loading discs in the disc tray, be sure to put the

discs according to the recess. Otherwise, the discs

will be damaged when the carousel is closed, and

cannot be removed from the unit.

1Open the carousel by pressing the 0 OPEN/

CLOSE button on the main unit or the OPEN/

CLOSE button on the remote control unit.

You can access to two of seven trays.

4Repeat steps 2 and 3 to set more discs onto

Main unit

Remote control unit

other disc trays.

OPEN/

OPEN/CLOSE

5Press the 0 OPEN/CLOSE button on the main

unit or the OPEN/CLOSE button on the remote

control unit to close the carousel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

Disc to be played back

To stop playback temporarily

The disc set in the front-left disc tray when the carousel

closes is loaded for playback. If no disc is set in the front-

left disc tray when the carousel closed, the unit rotates

the carousel clockwise until it finds a disc. If no disc is set

at all in the carousel, “NO DISC” will appear on the

display.

Press the 8 PAUSE button on the main unit or the 8

button on the remote control unit. The 8 indicator lights

on the display and playback stops temporarily.

To resume playback, press the 3 PLAY button on the

main unit or the 3 button on the remote control unit

again.

Playback operation before closing the carousel

• By pressing the 3 PLAY button on the main unit or the

3 button on the remote control unit, the carousel

closes and the disc to be played back firstly will be

played back.

Stopping playback

Press the 7 STOP button on the main unit or

the 7 button on the remote control unit.

• By pressing the DISC (1-7) buttons on the main unit or

the remote control unit, the specified disc will be

played back.

Main unit

Remote control unit

STOP

Playing a disc

Press the 3 PLAY button on the main unit or

the 3 button on the remote control unit.

The 3 indicator lights on the display and playback starts.

Total Playback time

A few seconds later

Main unit

Remote control unit

Total track number

PLAY

About the DISC (1-7) indicators

Each DISC indicator shows the current status of the

corresponding tray as follows:

DISC

TRACK

TIME

STEP

10 11 12

13 14 15 16 17 18

• The circle of the DISC indicator will light if a disc is set

in the corresponding disc tray. (The numbers 1-7 are

always lit.)

Playback elapsed time

DISC number being played back

• The circle is unlit if no disc is set in the corresponding

disc tray.

NOTE

• All available discs are sequentially played back.

Playback will continue until you stop it. (See “Stopping

playback” on this page.)

NOTES

• Inserted disc is detected when the carousel is turned.

So, until then, the unit cannot know the disc presence

status of the disc tray. For such disc trays, the unit

temporarily turns on the corresponding indicators.

Playing a desired disc

Press a desired DISC (1-7) button.

The 3 indicator lights on the display and playback starts.

• During program play mode, the number shows the

presence of disc and the circle shows the disc being

programed.

Main unit

Remote control unit

• During random play mode, the number shows the

presence of disc and the circle shows the disc being

played back for random play.

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7

DISC 1

DISC 2

DISC 3

DISC 4

DISC 5

DISC 6

DISC 7

About the music calendar

When a disc to be played back is read, the contents (track

numbers) of the disc appear on the music calendar. As

the track is finished to play back or skipped, the track

number will disappear from the music calendar.

• The DISC (1-7) button without the circle in the DISC

indicator does not work.

NOTE

• During program play mode, only the programed tracks

appear on the music calendar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

Using the track buttons

English

Locating a point to start

playback

Remote control unit

Skipping to a desired disc during

playback (DISC SKIP)

+10

Use the DISC SKIP button on the remote control unit.

To skip to the desired track during playback, press the

corresponding track buttons.

Remote control unit

DISC SKIP

[How to use the track buttons]

When selecting track number 11 or above, use the [+10]

button.

Example:

To select track number 12, press [+10] and then [2].

To select track number 25, press [+10] twice and then [5].

To select track number 30, press [+10] twice and then [10].

Each time the DISC SKIP button is pressed, the selected

DISC number changes from 1 to 7, then back to 1.

The selected disc will be played back.

• You can also use this button during stop mode.

NOTE

Searching for a desired section

• The EXCHANGE/DISC SKIP button on the main unit

does not work for this purpose.

During playback, press and hold the 4/¢ SKIP

buttons on the main unit or the 1/¡ buttons on the

remote control unit.

Changing to a desired disc during

playback DISC (1-7)

Main unit

Remote control unit

SKIP

Press any DISC (1-7) button to select a desired disc.

Main unit

Remote control unit

DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7

DISC 1

DISC 2

DISC 3

DISC 4

Playback advances or reverses rapidly.

DISC 5

DISC 6

DISC 7

While the 4 button on the main unit or the 1 button

on the remote control unit is kept pressed, playback

rapidly reverses toward the beginning of the track. While

the ¢ button on the main unit or the ¡ button on the

remote control unit is kept pressed, playback rapidly

advances toward the end of the track. When the desired

section is reached, release the button. The player

resumes normal playback from that point.

The selected disc will be played back.

• You can also use these buttons during stop mode.

Skipping to a desired track during

playback

• While searching, you can hear a playback sound.

Using the 4/¢ buttons

Main unit

Remote control unit

SKIP

To skip back to the beginning of the track being played,

tap the 4 button. When the beginning of the track is

reached, tapping this button again skips to the previous

track.

To skip to the next track, tap the ¢ button.

• You can also use these buttons during stop mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic operations

Specifying a desired track in stop mode

Playing tracks in a order of

disc/track number

To specify the desired track number, use the track

buttons (1-10, +10).

You can continuously play all the loaded discs, starting

from any track on any disc.

Remote control unit

1Press the 3 PLAY button on the main unit or

the 3 button on the remote control unit to

start playback.

+10

Playback starts from the current disc.

The following display appears.

The unit searches for the selected track and playback

starts automatically.

To specify the track number with the track buttons, see

“How to use the track buttons” on page 9.

DISC

TRACK

TIME

STEP

10 11 12

13 14 15 16 17 18

Playback elapsed time

Track number being played back

Selected disc number

Changing discs during

playback (EXCHANGE)

2Use the DISC (1-7) buttons on the main unit

or the remote control unit to select the disc

number which contains the first track you

want to play.

During playback of a disc, you can change other discs in

the disc trays without stopping playback.

When you want to play from the first track on the

selected disc, it is not necessary to select the track

number. In this case, omit the next step.

Press the EXCHANGE/DISC SKIP button on the main unit.

The carousel opens and you can change the discs inside.

The EXCHANGE indicator lights on the display.

3Select the track number with the 4/¢

buttons on the main unit or the remote control

unit or the track buttons on the remote control

unit.

Main unit

EXCHANGE/DISC SKIP

The selected track number appears on the display

and playback starts from the selected track

automatically.

To select the track number with the track buttons,

see “How to use the track buttons” on page 9.

To change the discs loaded in the far end of the disc tray,

press the EXCHANGE/DISC SKIP button on the main unit

or the DISC SKIP button on the remote control unit to

make the carousel rotate. After changing the discs, press

the 0 OPEN/CLOSE button to close the carousel. Then,

the EXCHANGE indicator goes out on the display.

DISC

TRACK

TIME

STEP

10 11 12

13 14 15 16 17 18

It is also possible to change the discs during program

playback or random playback, following the above

procedure.

Track number being played back

NOTE

• When the carousel is opened by pressing the

EXCHANGE/DISC SKIP button on the main unit, it is not

possible to close it by pushing it back with hand.

Always press the 0 OPEN/CLOSE button to close the

carousel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback patterns

English

4Repeat steps 2 and 3 for other tracks and/or

discs to be programmed.

Playing tracks in a desired

order (Program Play)

You can program up to 32 steps.

5Start playback by pressing the 3 PLAY button

on the main unit or the 3 button on the

remote control unit.

You can play only the favorite tracks in any desired order.

1In stop mode, press the PROGRAM button so

that the PROGRAM indicator lights on the

display.

The programmed tracks and/or discs are played in

the programmed order and, when all the

programmed tracks/discs are played back, program

playback stops.

Remote control unit

• You can skip to a desired program step with the

4/¢ buttons.

PROGRAM

If you have programmed all discs as “AL”,

pressing ¢ (or 4) will skip to the next (or

previous) disc.

•

To check the program contents

2Select the disc which contains the track to be

In stop mode or during playback, press the CALL

button on the remote control unit. Each time the CALL

button is pressed, the program contents are displayed

in the programmed order. (After pressing the CALL

button, perform the next button operation within five

seconds (during the program step number is

blinking).)

programmed with the DISC (1-7) button. “AL”

(all tracks) appears on the display.

ex.) When disc 4 is selected.

Shows that a disc is loaded

DISC

TRACK

TIME

STEP

•

To modify the program contents in stop mode

10 11 12

PROGRAM

To add a new program step to the last step, enter the

new disc number and/or track number referring to

steps 2 and 3 above.

13 14 15 16 17 18

To delete the program step from the last step, press

the CANCEL button on the remote control unit. Each

time the CANCEL button is pressed, the last program

step is deleted one by one.

To delete any program step, press the CALL button to

locate the program step number you want to delete,

and then press the CANCEL button. (After pressing

the CALL button, perform the next button operation

within five seconds (during the program step number

is blinking).)

Program step number

PROGRAM indicator AL (all tracks)

To program the entire disc

When the track number is not specified after

selecting the disc number, all tracks on the selected

disc are programmed.

3Select the track number by pressing the

track buttons on the remote control unit.

To select the track number with the track buttons,

see “How to use the track buttons” on page 9.

•

To exit program mode in stop mode

To exit program mode, press the PROGRAM button on

the remote control unit so that the PROGRAM

indicator goes out on the display. However, the

program contents are not erased and, whenever the

program mode is selected, you can play the tracks in

programmed order.

Remote control unit

+10

To clear the entire program contents

In stop mode, press the CANCEL button on the remote

control unit repeatedly until entire program contents

are deleted. Or, press the 0 OPEN/CLOSE button on

the main unit or the OPEN/CLOSE button on the

remote control unit.

ex.) When track 5 is selected.

Shows the disc being programmed

Even after the entire program contents have been

cleared, the unit remains in program mode.

Note that turning off the unit does not clear the

program contents.

DISC

TRACK

TIME

STEP

10 11 12

PROGRAM

13 14 15 16 17 18

If the AC power cord is disconnected from the outlet,

the program will be erased.

Track number selected for the program step 1

• If you want to cancel the displayed program step,

press the CANCEL button on the remote control

unit and then enter a new disc number and/or

track number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various playback patterns

Playing tracks in a random

order (Random Play)

Playing repeatedly

(Repeat Play)

You can select and play tracks in random order from all

the discs loaded in the unit.

Selections are made so that each track is played only

once.

Normally, all available discs are sequentially played

back. However, with the repeat play function, you can

repeatedly play all tracks of a disc or one track.

It is also possible to utilize this function in combination

with random/program playback function.

1In stop mode, press the RANDOM button so

that the RANDOM indicator lights on the

display.

Repeating all the tracks of a disc

Press the REPEAT button repeatedly until the REPEAT

indicator lights on the display.

Remote control unit

RANDOM

Remote control unit

REPEAT

DISC

TRACK

TIME

STEP

10 11 12

PROGRAM

RANDOM

13 14 15 16 17 18

RANDOM indicator

REPEAT indicator

2Press the 3 PLAY button on the main unit or

the 3 button on the remote control unit to

start playback.

When playback starts, all tracks of the disc being

selected will be played repeatedly.

(To select a desired disc, see “Playing a desired disc” on

page 8.)

• To skip to the track to be played next, press the

¢ button.

• To skip to the beginning of the current track,

press the 4 button.

• You can use this function together with the program

playback or random playback. In program mode, the

programmed contents are played repeatedly. In

random mode, all the tracks are played repeatedly in

random order.

•

To cancel random playback

In stop mode, press the RANDOM button on the

remote control unit. The RANDOM indicator goes out

and the random playback is cancelled.

Repeating one track

Press the REPEAT button repeatedly until the REPEAT 1

indicator lights on the display.

REPEAT1 indicator

When playback starts, the track being selected will be

played repeatedly.

(To select a desired track, see “Skipping to a desired

track during playback” on page 9.)

• You can use this function together with the program

playback or random playback.

To cancel repeat mode

Press the REPEAT button so that both the REPEAT and

REPEAT 1 indicators go out.

Download from Www.Somanuals.com. All Manuals Search And Download.

General informations

English

COMPU LINK remote control system

The COMPU LINK Remote Control System controls relative operations between components automatically and

facilitates various operations.

This is a system originated and developed by JVC for facilitating various system operations.

The following is a brief explanation of this system:

Automatic source selection

When the supplied COMPU LINK cord is utilized to connect this unit to others equipped with COMPU LINK jacks,

switching-in of each system component can be performed with a single touch on the source selector button located on a

JVC amplifier or receiver.

When selection is carried out in this manner, the corresponding unit will automatically start operation.

Upon pressing of the play button, the source selector of the amplifier or receiver changes automatically. When a new

unit is switched in, the previously selected component stops operation within five seconds.

Synchronized recording

Synchronized recording refers to the process in which a JVC cassette deck starts recording, synchronized with this unit.

Synchronized recording is carried out as follows:

1 Set the cassette deck to the recording pause mode in accordance with its instructions.

2 To record only certain tracks or discs, program the tracks in any order, as desired.

3 Press the 3 PLAY button on the front panel of this unit. The cassette deck automatically starts recording, synchronized

with this unit.

NOTES

• Synchronized recording stops automatically when this unit stops playback.

• To cancel synchronized recording, press the stop button of this unit or the cassette deck.

• To properly operate the synchronized recording, the buttons/controls other than % STANDBY/ON, 7 STOP and 0 OPEN/

CLOSE buttons do not function.

• If the recording pause mode is set on the cassette deck by pressing the 8 PAUSE button after pressing the ¶ REC and 3 PLAY

buttons simultaneously, synchronized recording is not possible. For details, refer to the instructions for the cassette deck.

Automatic power on/off function

This function is to control the power on/off of the receiver/amplifier or this unit respectively as the following.

• When this unit enters playback mode, the power of the receiver or amplifier is turned on.

• When the source selector of the receiver/amplifier is set to CD function mode, the power of this unit is turned on.

NOTES

• Abnormal operation may result if the power supply of the component(s) is interrupted. If this happens, you must start over

again.

• Ensure that the COMPU LINK jacks of the each component are connected with the supplied COMPU LINK cord. Also, be sure to

fully read the instructions for each component.

• When the power of the amplifier or receiver is switched off, this unit is also turned off automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

General informations

Care and handling

How to handle CDs

When handling compact discs, do not touch the surface of the disc (reflective silver side — the side without the label).

Since compact discs are made of plastic, they are easily damaged. If the disc gets dirty, dusty, scratched or warped, the

sound will not be picked up correctly and, in addition, such discs may cause the CD player to malfunction.

Even on label side

Do not damage the label side, stick paper to or use any adhesive on the surface.

Storage

Make sure that discs are kept in their cases. If discs are piled one on top of another without their protective cases, they

can be damaged.

Do not put discs in any location where they can be exposed to direct sunlight, or in any place where humidity or

temperature is high. Avoid leaving discs in your car!

Maintenance of discs

When there are fingerprints or other dirt adhering to a disc, wipe the disc with a soft, dry cloth with a movement going

from the center outwards.

If difficult to clean, wipe the disc with a cloth moistened with water.

Never use record cleaners, petrol, alcohol or any anti-static agents.

Download from Www.Somanuals.com. All Manuals Search And Download.

General informations

English

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.

Symptom

Possible case

Remedy

Power plug is disconnected from the AC

outlet.

Connect the plug to the AC outlet.

Load discs in the disc tray.

The unit is not operative.

Discs are not loaded.

Load the disc with its label-side up in the disc

tray.

Disc is inserted upside down.

Load the disc according to the groove of the

disc tray.

Disc is not loaded in the correct position.

Moisture is condensed inside the unit.

Playback is not possible.

Leave the unit turned on until the moisture

evaporates.

Disc is not finalized.

Disc is dirty.

Finalize the disc.

Wipe off the disc surface with a soft cloth.

Replace the disc with a new one.

Replace both batteries.

The reproduced sound includes

noise.

Disc is warped.

The sound is intermittent.

Disc is scratched.

Batteries are exhausted.

There is an obstacle between remote

control unit and the remote sensor of the

main unit.

The remote control unit does not

function.

Remove the obstacle.

Direct sunlight shines on the remote sensor

of the main unit.

Shade the unit from the direct sunlight.

Specifications

Accessories

General

AC power cord (1)

Format:

Compact disc digital audio

Audio cord (1)

COMPU LINK cord (1)

Signal detection system: Non-contact optical detection

CD capacity:

7 discs

Remote control unit (RM-SXLFZ700J) (1)

Batteries R6P(SUM-3)/AA(15F) (2)

Sampling frequency:

Power requirements:

Power consumption:

44.1 kHz

AC 120 V

7.0 W (POWER ON)

, 60 Hz

3.0 W (STANDBY mode)

Dimensions (W x H x D): 435 mm x 102 mm x 448 mm

(17-3/16 in. x 4-1/16 in.

* Designs and specifications are subject to change

without notice.

x 17-11/16 in.)

Mass:

Approx. 5.5 kJ (12.2 lbs)

Audio performance

Frequency response:

Dynamic range:

2 Hz to 20,000 Hz ( 1 dB)

98.0 dB (at 1 kHz)

108.0 dB

Signal to noise ratio:

Total harmonic distortion: 0.002% (at 1 kHz)

Wow and flutter:

Output level:

Less than measurable limit

2.0 Vrms

Download from Www.Somanuals.com. All Manuals Search And Download.

Authorized Service Centers

QUALITY

SERVICE

HOW TO LOCATE YOUR JVC SERVICE CENTER

TOLL FREE: 1 (800) 537-5722

http://www.jvc.com

Dear Customer,

In order to receive the most satisfaction from your purchase,please read the instruction booklet before

operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest

authorized servicer or visit our website at www.JVC.com

Remember to retain your Bill of Sale for Warranty Service.

Do not service the television yourself

Caution

To prevent electrical shock,do not open the cabinet.There are no user serviceable

parts inside.Please refer to qualified service personnel for repairs.

Accessories

To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or

on the web at www.JVC.com

BT-51001-5

(0301)

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

AUDIO-1

JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE

ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date

of original retail purchase for the period as shown below. ("The Warranty Period")

PARTS

LABOR

1 YR

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND

IN COMMONWEALTH OF PUERTO RICO.

WHAT WE WILL DO:

If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.

Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service

centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts

thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen

size 25 inches and above which are covered on an in-home basis.

WHAT YOU MUST DO FOR WARRANTY SERVICE:

Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized

service center, please call toll free: (800) 537-5722.

If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with

a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the

name and location of which will be given to you by the toll-free number.

If you have any questions concerning your JVC Product, please contact our Customer Relations Department.

WHAT IS NOT COVERED:

This limited warranty provided by JVC does not cover:

1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty

installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by

JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number

or serial number has been altered, tampered with, defaced or removed;

2. Initial installation and installation and removal for repair;

3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;

4. Damage that occurs in shipment, due to act of God, and cosmetic damage;

5. Signal reception problems and failures due to line power surge;

6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;

7. Accessories

8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);

There are no express warranties except as listed above.

THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS

LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.

JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER

DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE

TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH

OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an

implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific

legal rights and you may also have other rights which vary from state to state.

JVC COMPANY OF AMERICA

DIVISION OF JVC AMERICAS CORP.

1700 Valley Road

Wayne, NJ 07470

REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF

REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION

PACKAGED WITH EACH REFURBISHED PRODUCT.

For customer use:

Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information

for future reference.

Model No. :

Serial No. :

Purchase data :

Name of dealer :

Download from Www.Somanuals.com. All Manuals Search And Download.

VICTOR COMPANY OF JAPAN, LIMITED

0202AOMCREJEM

Download from Www.Somanuals.com. All Manuals Search And Download.

&203$&7ꢀ',6&ꢀ$8720$7,&ꢀ&+$1*(5

/(&7(85ꢃ&+$1*(85ꢃ'(ꢃ&203$&7ꢃ',6&6

Introduction

;/ꢀ)=ꢁꢂꢂ%.

Before using for the first time

Avant la première utilisation

Basic operations

Opérations de base

Various playback patterns

Diverses possibilites de lecture

OPEN/

REPEAT

STANDBY/ON

RANDOM PROGRAM CANCEL

CALL

DISC

DISCSKIP

General informations

Renseignements divers

+10

RM-SXLFZ700J

REMOTE CONTROL

CD-R/RW PLAYBACK

D CONVERTER

1BIT

,16758&7,216

0$18$/ꢀ'¶,16758&7,216

)RUꢃ&XVWRPHUꢃ8VHꢄ

(QWHUꢀEHORZꢀWKHꢀ0RGHOꢀ1RꢁꢀDQGꢀ6HULDOꢀ1Rꢁꢀ

ZKLFKꢀDUHꢀORFDWHGꢀRQꢀWKHꢀUHDUꢂꢀERWWRPꢀRUꢀ

VLGHꢀRIꢀWKHꢀFDELQHWꢁꢀ5HWDLQꢀWKLVꢀLQIRUPDWLRQꢀ

IRUꢀIXWXUHꢀUHIHUHQFHꢁ

/97ꢃꢄꢅꢆꢇꢃꢃꢈ$

>&@

Download from Www.Somanuals.com. All Manuals Search And Download.

Warnings, Cautions and Others

Mises en garde, précautions et indications diverses

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1. Do not remove screws, covers or cabinet.

2. Do not expose this appliance to rain or moisture.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de

l’appareil.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

2. Ne pas exposer l’appareil à la pluie ni à l’humidité.

The lightning flash with arrowhead symbol,

within an equilateral triangle is intended to

alert the user to the presence of uninsulated

"dangerous voltage" within the product's

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

Caution –– STANDBY/ON

Disconnect the mains plug to shut the power off completely. The

STANDBY/ON switch in any position does not disconnect the

mains line. The power can be remote controlled.

switch!

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Attention –– Commutateur STANDBY/ON

Déconnecterlafichedesecteurpourcoupercomplètementlecourant.

LecommutateurSTANDBY/ON

necoupejamaiscomplètementla

ligne de secteur, quelle que soit sa position. Le courant peut être

télécommandé.

For U.S.A.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

IMPORTANT FOR LASER PRODUCTS

IMPORTANT POUR LES PRODUITS LASER

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

1. CLASS 1 LASER PRODUCT

2. DANGER: Visible laser radiation when open and interlock failed or

defeated. Avoid direct exposure to beam.

3. CAUTION: Do not open the top cover. There are no user service-

able parts inside the Unit; leave all servicing to qualified service

personnel.

1. PRODUIT LASER CLASSE 1

2. ATTENTION: Radiation laser visible quand l'appareil est ouvert ou

que le verrouillage est en panne ou désactivé. Eviter une exposition

directe au rayon.

3. ATTENTION: Ne pas ouvrir le couvercle du dessus. Il n'y a aucune

pièce utilisable à l'intérieur. Laisser à un personnel qualifié le soin

de réparer votre appareil.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING: TO REDUCE THE RISK OF FIRE

OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQUAU FOND

For Canada / Pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B

LIMITS FOR RADIO NOISE EMISSIONS FORM DIGITAL

APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING

EQUIPMENTSTANDARDENTITLED“DIGITALAPPARATUS,”ICES-

003 OF THE DEPARTMENT OF COMMUNICATIONS.

CETAPPAREILNUMERIQUERESPECTELESLIMITESDEBRUITS

RADIOELECTRIQUES APPLICABLES AUX APPAREILS

NUMERIQUES DE CLASSE B PRESCRITES DANS LA NORME

SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”,

NMB-003 EDICTEE PAR LE MINISTRE DES COMMUNICATIONS.