JL Audio Speaker 10W6V2 D4 User Manual

10W6v2-D4 12W6v2-D4 13W6v2-D4  
Subwoofers  
o w n e r ’ s m a n u a l  
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a  
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance  
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different  
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality  
enclosure that will maximize the performance of your speaker. We highly recommend that you have  
your enclosure built by an authorized JL Audio dealer.  
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed  
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and  
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported  
enclosure will produce 3dB more output at the same power if you have the extra space to work with.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUBWOOFER SPECIFICATIONS  
SUBWOOFER: 10W6v2-D4 12W6v2-D4 13W6v2-D4  
W6v2TECHNOLOGIES  
W6v2TERMINAL JUMPER SYSTEM  
Please note that the W6v2 is a dual voice coil driver.  
BOTHvoice coils must be connected to the amplifier  
(in series or parallel) for the speaker to operate  
properly. To accomplish this, each W6v2 features a  
pair of main input connection push-terminals and  
four voice coil configuration tab terminals.These are  
located behind the main input connectors and are  
used to interconnect the dual voice coils in one of  
two ways:DiagramA shows a series connection (8Ω  
nominal impedance per speaker). Diagram B shows  
a parallel connection (2Ω nominal impedance per  
speaker) and is the way the speaker is configured at  
the factory.After verifying that the tabs are properly  
configured using the supplied jumper(s), connect  
the amplifier’s output wires to the W6v2’s main  
input push-terminals and install the speaker into the  
enclosure.  
* Xmax specifications are derived via one-way voice coil overhang method with  
no correction factors applied.  
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output  
capability and should not be used as a comparison to other subwoofers to  
determine which one is “louder” !  
*** Re (DC resistance) is measured with the voice coils in series, for parallel-  
wired specification divide Re by 4. All other specifications remain the same.  
Free Air Resonance (Fs):  
Electrical “Q” (Qes):  
28.5 Hz  
0.497  
25.0 Hz  
0.480  
24.3 Hz  
0.464  
Mechanical “Q” (Qms):  
Total Speaker “Q” (Qts):  
Equiv. Compliance (Vas):  
8.458  
0.469  
1.18 ft3  
33.4 litres  
0.60 in  
15.2 mm  
7.100  
0.450  
6.700  
0.434  
2.82 ft3  
79.9 litres  
0.65 in  
16.5 mm  
85.9 dB SPL  
77.8 in2  
0.0502 m2  
6.75Ω  
3.94 ft3  
111.6 litres  
0.85 in.  
21.6 mm  
87.4 dB SPL  
100.4 in2  
0.0648 m2  
6.50Ω  
The W6v2’s employ a pole vent to remove heat and pressure from the inside of the  
speaker.This vent is located around the JL Audio badge at the rear of the speaker.A  
minimum distance of 3/4-inch (20mm) is required between the back of the speaker  
and any wall of the enclosure to allow proper operation of the pole vent.  
The enclosure recommendations listed are external dimensions which assume the  
use of 3/4" (19mm) thick material.If you are using 5/8" (16mm) thick material,subtract  
1/4" (6.5mm) from each dimension. Do not use any material with a thickness of less  
than 5/8" (16mm) as this may compromise the rigidity of the enclosure.  
All enclosure volumes listed are net internal volumes! Box volume displacement,  
port displacement and brace displacement must be added to obtain the final gross  
internal volume.All enclosure dimensions listed have already taken this into account.  
• When using two subwoofers in a common enclosure simply double the  
required volume and, in the case of a ported enclosure, use two times the  
recommended port(s).  
One-way, Linear Excursion:  
(Xmax)*  
Efficiency (1W/1m)**: 83.7 dB SPL  
Effective Piston Area (Sd):  
51.4 in2  
0.0332 m2  
6.30Ω  
Dual 4Ω  
600W  
DC Resistance (Re)***:  
Nominal Impedance:  
Power Handling (continuous):  
Mounting Depth:  
Dual 4Ω  
600W  
7.6 in  
Dual 4Ω  
750W  
9.2 in  
6.9 in  
175 mm  
9.0 in  
229 mm  
0.068 ft3  
1.9 litres  
193 mm  
11.0 in  
279 mm  
0.090 ft3  
2.5 litres  
234 mm  
12.5 in  
318 mm  
0.120 ft3  
3.4 litres  
Warning! Failure to properly connect the  
configuration tabs will result in no output and may  
damage the speaker.  
Mounting Hole Diameter:  
Driver Displacement:  
• We recommend the use of this speaker in a bi-amplified system using high-  
quality satellite speakers and amplifiers. We do not recommend the use of this  
subwoofer with a passive crossover (coil), as this type of device will adversely  
affect performance.  
RECOMMENDED ENCLOSURES  
SUBWOOFER  
SEALED ENCLOSURE  
PORTED ENCLOSURE  
Volume  
(net int.) (Width x Height x Depth) (net int.)  
0.625 ft3 0.75 ft3  
14.5" x 12" x 10.25"  
17.7 litres 368mm x 305mm x 260mm 21.2 litres  
1.25 ft3 1.50 ft3  
18" x 14" x 12.75"  
35.4 litres 457mm x 356mm x 324mm 42.5 litres  
1.625 ft3 1.875 ft3  
18" x 16" x 14.125"  
46 litres 457mm x 406mm x 359mm 53.1 litres  
External Dimensions  
Volume Enclosure External Dimensions  
Slot Port Internal Dimensions  
(SlotWidth x Slot Height x Slot Length)  
1.25" x 10.5" x 30"  
1 - CustomizableTrim Ring: (U.S. Patent  
#D480,709)This removable ring can be painted to  
match the installation theme, if desired.  
6 - Forced-Air-Cooled Aluminum Alloy Frame  
(U.S. Patent #6,219,431, #6,229,902 and  
#D472,891): Cool air is directly pumped onto the  
voice coil of the speaker through slots between the  
frame and top-plate.This enhances power handling  
and sound quality by minimizing dynamic parameter  
shifts and power compression.  
7 - Highly Optimized Motor Systems:  
Highly linear, FEA-optimized motors reduce audible  
distortion and improve transient behavior for  
superior sound quality and dynamic stability.  
8 - Large, Progressive-Roll Spiders:  
Optimized to control the long excursion of the  
W6v2's without limiting it.  
9 - Engineered LeadWires and Connectors:  
Connections for both voice coils terminate in a  
unique configuration block on one side of the  
basket.The extruded lead wire casing and  
carefully engineered attachments ensure controlled  
behavior and improved reliability under extreme  
excursion demands.  
(Width x Height x Depth)  
22" x 12" x 10.75"  
559mm x 305mm x 273mm  
26.25" x 14" x 13"  
667mm x 356mm x 330mm  
18.875" x 16.5" x 18.625"  
479mm x 419mm x 473mm  
10W6v2-D4  
12W6v2-D4  
32mm x 267mm x 762mm  
1.5" x 12.5" x 29"  
38mm x 318mm x 737mm  
1.75" x 15" x 27.625" 35.4 litres  
44mm x 381mm x 702mm  
2 -W-Cone™ (U.S. Patent #6,496,590)The  
W-Cone™ unit-body cone assembly delivers  
astonishing cone-stiffness with minimal mass.  
3 - Floating-Cone™ Attach Method  
(U.S. Patent #6,501,844): This unique assembly  
technique ensures proper surround geometry in the  
assembled speaker for better excursion control  
and dynamic voice coil alignment.  
4 - Plateau-Reinforced Spider Attachment  
(U.S. Patent #6,118,884): A derivative of JL Audio's  
famousVRC technology, this bulletproof suspension  
attachment relieves stress from the spider material  
at high excursions for enhanced reliability.  
5 - Pole and ConeVenting (Patent-Pending):  
Vents at the neck of the lower cone body work in  
conjunction with the pole vent at the rear of the  
motor structure.These vents effectively remove hot  
air during high power operation to improve sound  
quality and reliability.  
Diagram A: Series Connection (8Ω):  
Use one jumper from “VC1–” to “VC2+”  
13W6v2-D4  
C A U T I O N  
!!  
!!  
Prolonged exposure to sound  
pressure levels in excess of 100dB can  
cause permanent hearing loss. This high-  
performance speaker can exceed this level.  
Please exercise restraint in its operation  
in order to preserve your ability to enjoy  
its fidelity.  
When installing a subwoofer in your  
vehicle, it is extremely important to secure  
the enclosure firmly. We recommend  
bolting the enclosure through the metal of  
the floorpan or the frame of the  
vehicle with large diameter washers for  
reinforcement. If an enclosure is not firmly  
attached, it can become a projectile in a  
collision. This is particularly important in  
a hatchback, station wagon, sports utility  
vehicle, or van.  
“EL” (Port Extension Length):  
10W6v2: 17.25" (438mm)  
12W6v2:16" (406mm)  
Diagram B: Parallel Connection (2Ω):  
Use two jumpers... one from “VC1–” to “VC2–” and  
one from “VC1+ to “VC2+”.  
13W6v2:9.75" (248mm)  
All specifications are subject to change without notice.  
2
JL AUDIO 10W6v2-D4/12W6v2-D410W6v2-D4/13W6v2-D4  
JL AUDIO 10W6v2-D4/12W6v2-D4/13W6v2-D4  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Musical Toy Instrument MHD56250 User Manual
IOGear Computer Drive GUH224 User Manual
Jet Tools Saw JWBS 16 User Manual
JVC CD Player KD G305 User Manual
JVC DVD Player KD DV5307 User Manual
JVC DVD Player XV M50BK User Manual
JVC Speaker System FS X5 User Manual
KitchenAid Cooktop 3181199 User Manual
KitchenAid Dishwasher 8269909 User Manual
KitchenAid Water Pump 4176199 User Manual