JL Audio Car Speaker SB GM SLVEXT 10W6v2 User Manual

®
Stealthbox  
I N S TALLATI O N GUI DE  
START  
HERE  
for the  
6.5”  
6.5”  
SB-GM-SLVEXT/10W6v2  
(1999-2005 Chevrolet Silverado /  
GMC Sierra Extended Cab Trucks  
with full rear bench seating.)  
(These instructions show for both enclo-  
sures. These enclosures are  
X
X
6.0”  
6.0”  
sold separately )  
Passengers Side  
Drivers Side  
STEP 3: Thread in the supplied socket cup  
set screw into the/each enclosure, leaving  
about 1/2” of the treads exposed.  
STEP 1: Remove all contents from the rear  
STEP 1: Remove all contents from the rear  
floor area.  
floor area.  
Make sure that the cup end of the set screw  
is on the outside of the enclosure.  
Remove the paper backing and place the sup-  
plied wax square on the passengers side rear  
floor.The middle of the wax square needs to  
be placed 6.5” in front of the rear bulkhead  
and 6.0” away from the transmission tunnel.  
Remove the paper backing and place the sup-  
plied wax square on the drivers side rear floor.  
The middle of the wax square needs to be  
placed 6.5” in front of the rear bulkhead and  
6.0” away from the transmission tunnel.  
*CAUTIO N*  
Before drilling, make sure that you are not going  
to be drilling into any gas lines, brake lines, trans-  
mission lines, electrical wiring, transfer case(4x4  
vehicles) or anything else that might cause a  
reduction in your weekly pay. Always wear eye  
protection when drilling.  
This Stealthbox is a product which  
requires professional installation skills and  
tools.  
Please read this installation guide thor-  
oughly before beginning the project. It  
will guide you step by step through the  
installation. Several of the steps in this  
process may require two people to  
accomplish.  
It is absolutely vital that the enclosure  
be properly mounted to the vehicle  
according to these instructions. Failure  
to mount the enclosure properly pres-  
ents two problems: 1) The sub-bass  
performance will suffer due to the  
movement of the enclosure caused by  
the force exerted by the woofer(s) and  
2) A loose enclosure presents a serious  
safety hazard in the event of a collision  
or sudden deceleration.  
STEP 4: Place the/each enclosure into posi-  
tion and press down firmly.  
STEP 5: With the use of a 1/2” drill bit and drill.  
Drill out the floor at the impression on the wax  
square(s).  
Remove the/each enclosure.The wax square  
should have an impression of the socket cup  
set screw.  
Please enjoy your JL Audio Stealthbox  
responsibly.  
Continued on Next Page  
SB-GM-SXT/10W6v2, JL AUDIO, Inc 2006  
Page 1  
Sheet SKU#011199 Revision 1/12/2006  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer WE 10 User Manual
Insignia Portable DVD Player NS A2202 User Manual
Invacare Personal Lift 1150704 User Manual
Invacare Respiratory Product PLATINUM 5 User Manual
JVC CRT Television AV 27050 User Manual
JVC VCR HM HDS1U User Manual
Kalorik Coffeemaker USK CM 17442 User Manual
Kenwood Stereo Receiver KRF A4030 User Manual
KitchenAid Double Oven KERS505 User Manual
KitchenAid Microwave Oven KEMI300 User Manual