High Power Two-Way
4894-90Loudspeaker System
Array Series
Key Features:
Wide Coverage Angle Design
90° Horizontal Horn Pattern for
Non-arrayed Applications
High Technology Transducers
355 mm (14 in) Ultra-low Distortion
Neodymium Woofer with Unique
Gap Topology,
38 mm (1½ in) exit, 100 mm (4 in)
diaphragm Neodymium
Compression Driver
Secure Array Flying Ergonomics -
S.A.F.E.™
Internal Steel Braces accept
Optional Truss Module and
Hardware
Integrally Designed with JBL
Array Series Controllers
Choose Analog, or Digital
Controller for optimum system
performance
Specifications:
Frequency Response (± 3 dB)1:
46 Hz - 18 kHz
Sensitivity:
Recommended Amplifier Power2:
High Frequency:
100 dB (1 W, 1
Versatile
300 W at 8 ohms
Concert and Theater Reinforce-
ment, A/V Presentation, High
Power Installations
Low Frequency:
600 W at 8 ohms each transducer, 1200 W total
90° horizontal, 40° vertical
Nominal Coverage:
LOW FREQUENCY TRANSDUCERS:
Nominal Diameter: 355 mm (14 in)
Array Series Systems
Nominal Impedance:
Two transducers with separate pinouts
8 ohms each
JBL’s commitment of providing audio
professionals the best tools for their
work continues with the Array Series.
JBL Array Series systems provide the
ultimate performance for touring and
fixed installations. The high power,
compact 4894-90 provides smooth,
predictable coverage and response
from a single box. It combines ease of,
transport with the flexibility to fly or
install quickly and safely. Integration
of advanced design high power trans-
ducers, a new generation of horns,
and advanced control electronics pro-
vides clearly superior performance.
Reliability is designed in, without
having to relay on intrusive signal
processing.
Power Rating:
600 watts AES, 50 Hz to 500 Hz, 2400 W
Peak each transducer. 1200 W total
Voice Coil:
Features:
100 mm (4 in) edgewound aluminum ribbon
Ultra linear, neodymium magnet motor structure
Vented Gap Cooling
HIGH FREQUENCY TRANSDUCER:
Throat Diameter:
38 mm (1½ in) exit
Nominal Impedance: 8 ohms
Power Rating:
Diaphragm:
Voice Coil:
75 watts AES, 1 kHz to 10 kHz, 300 W peak
100 mm (4 in) pure titanium
100 mm (4 in) edgewound aluminum ribbon
Features: Neodymium magnet motor structure
HIGH FREQUENCY HORN:
Type: Optimized Aperture™ Flat-Front Bi-Radial®
Material: Die cast aluminum
Coverage: 90° horizontal, 40° vertical
ENCLOSURE:
Type: Vented, 45” included angle trapezoid
Components
Material:
19 mm (¾ in), 13 ply hardwood
Flying System: S.A.F.E. -JBL proprietary, modular, certified
Finish: Black textured paint
Array Series builds upon a solid foun-
dation: more than 40 years of JBL
transducer expertise and engineering.
The 355 mm (14 in) low frequency
transducer represents JBL’s commit-
ment to research. New technology
includes a unique deep copper-
Grille:
Connectors:
16 ga. perforated steel, foam backed
Parallel 8 pin Neutrik -pins 1 ± LF1, pins 2 ± LF2,
pins 3 ± HF
Dimensions:
H x W x D
Net Weight:
1066 x 394 x 362 mm
(42 x 15½ x 14¼ in)
47.3 kg (104 lb)
sleeved gap low-distortion motor
structure topology, coupled to Vented
Gap Cooling (VGC TM )1 to produce
¹
²
Half Space measurement.
Recommended Power Amplifier ratings are
a
guide for amplifier selection considering normal program material and line
voltage available to amplifiers, although lower power amplifiers may be utilized The 4894 system is capable of signifi-
cantly greater peak power input.
1U.S. Patent #5,042,072
Download from Www.Somanuals.com. All Manuals Search And Download.
4894-90 High Power Two-way Loudspeaker System
the accurate reproduction at high power levels with
minimal power compression. A new 38 mm (1% in)
exit neodymium high frequency compression driver
with Coherent Wave’” phasing plug and 100 mm (4 in)
titanium diaphragm delivers low distortion response to
beyond 20 kHz. A 90° Optimized Aperture™ Flat-Front
Bi-Radial ® horn² provides accurate pattern control over
its entire bandwidth.
S.A.F.E.™Secure Array Flying Ergonomics
¼
x 20 threads, 4 places,
top and bottom
Important for both portable and fixed installation appli-
cations is the ability to rig a cluster quickly, but with
absolute safety. The 4894-90 has four internal steel braces
that are ready to accept optional bolt-on truss modules.
An array to provide desired coverage can be quickly
assembled using a few basic fittings. Ultimate break
strength of this method exceeds 2700 kg (6000 lb). A com-
plete line of hardware is available for many applications
including flying subwoofers in an array.
Optional S.A.F.E. Fittings
Active Control
The ASC24 provides cost effective analog signal process-
ing with simple setup. The DSC280 offers additional
precision, flexibility, and user convenience available
only in the digital domain. Both provide superior high
level sound quality.
Enclosure
Extremely rigid 19 mm ( ¾ in) 13 ply hardwood, a
textured black paint finish, and a perforated 16 ga.
steel grille form a durable package.
Applications
Module
-TM 12
The 4894-90 is ideal for applications requiring high
fidelity, high level music reproduction, or high intelligi-
bility speech reinforcement. For applications requiring
very low frequency reinforcement the 4893 subwoofer’s
dimensions match the 4894-90 allowing convenient
integration.
²
U.S. Patent #4,308,932
OPTIONAL S.A.F.E.
FLYING HARDWARE:
Stacking Bracket
ASF-SB12
Truss Module: Cabinet flying truss
Shackle Mount:
Attaches to truss module to create
a lifting point
Quick Release Pin: Locks S.A.F.E. components
Stacking Bracket: Vertically attaches two truss modules
Locking Steel Caribiner:
Used with shackle mount
Net Weight loudspeaker with
Truss Modules installed:
51.8 kg (114 lb)
JBL continually engages in research related to product improvement New materials, pro-
duction methods, and design refinements are introduced into existing products without
notice as
a
routine expression of that philosophy. For this reason, any current JBL product
may differ in some respect from its published description but will always equal or exceed
the original design specifications unless otherwise stated.
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS 4894-90
CRP 10M
9/95
A
Harman International Company
Download from Www.Somanuals.com. All Manuals Search And Download.
|