I N V A C A R E ® I N T O U C H ™
PCS
Positioning Back
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware
Features
Benefits
Single-point mounting hardware
Provides dual point strength in addition to secure mounting between canes without any unwanted play, while allowing height, depth
and back angle adjustment. Designed to mount onto back canes with an outside diameter of 1" or 7/8"
Only one tool needed for all installations, adjustments and accessories
One tool assembly
Quick release latch
Allows one hand operation for removal and remounting of the back during transport
QUICK RELEASE LATCH
LOCK
UNLOCK
Depth
Adjustment
Angle
Adjustment
Back Shell
Features
Benefits
Aluminum shell
Lightweight to reduce overall weight of the frame and minimizes weight penalty when used with manual mobility thereby
improving efficiency with propulsion
Pre-drilled headrest holes
Headrest can be mounted directly on the back and easily accommodates standard headrest mounting hardware
Pre-drilled
headrest holes
Aluminum Shell
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Features
Benefits
Thoracic Lateral Supports
Pelvic Stabilizers
Optional supports (4" tall) provide improved trunk control and stability
Optional supports (3" tall) promote pelvic stability
These optional supports provide additional positioning for the trunk and pelvis to increase support for maximizing
upright (spinal extension) and midline (centered) trunk positioning. The thoracic lateral supports and pelvic
stabilizers are adjustable in height and width for accommodating fixed posture asymmetries, correcting flexible
postural deformities or adjusting over time to support postural changes incrementally in steps. Additionally, these
supports act as clinician’s hands to keep the patient in the best position identified.
Height and width adjustment for
optional thoracic lateral supports
and pelvic stabilizers
Thoracic lateral supports
Invacare Corporation
Pelvic stabilizers
USA
One Invacare Way
Elyria, Ohio
44035-4190
(800) 333-6900
Canada
570 Matheson Blvd. E.
Unit 8
Mississauga, Ontario
L4Z 4G4 Canada
(800) 668-5324
Specifications
Available widths
Height
Depth adjustment
Angle adjust
Model Numbers
ITPCSR (Regular)
ITPCST (Tall)
14" - 24" (1" increments)
16" (Regular); 20" (Tall)
1.5" to the back
+/- 30°
Product weight
User weight limited 300 lb. (14"-21"); 500 lb. (22"- 24")
Limited warranty 2 years
5 lb. approx.
© 2010
Invacare Corporation.
All rights reserved. All
trademarks are identified by
the symbols ™ and ®.
All trademarks are owned
by or licensed to
Invacare Corporation
unless otherwise noted.
Specifications are
HCPCS Code
Invacare® InTouch™ PCS Back :
E2620 Positioning wheelchair back cushion with lateral supports, less than 22" wide
E2621 Positioning wheelchair back cushion with lateral supports width 22" or greater
Optional Thoracic Lateral Supports and Pelvic Stabilizers
E0956 Wheelchair Accessory, Lateral Trunk or Hip Supports, any type, including fixed mounting hardware.
subject to change
without notification.
Application
This back is appropriate for children and adults:
Form No. 09-037
Rev. 08/10
100636
• Who have a significant postural asymmetry due to a number of diagnoses. Diagnoses may include, but are not limited to,
hemiplegia, traumatic brain injury, muscular dystrophy, torsion dystonias, spinocerebellar disease, spinal cord injury, multiple
sclerosis, cerebral palsy, amyotrophic lateral sclerosis, post polio syndrome, spina bfida, Alzheimer’s and Parkinson’s.
• Who require a wheelchair back for positioning, support or stability for function due to impaired or absent trunk balance or
abnormal muscle tone.
NOTICE: This information is not intended to be, nor should it be considered medical, billing or legal advice. Please consult your proper medical provider and/or attorney when needed to select the
appropriate product and to discuss specific situations when submitting claims to Medicare.
Download from Www.Somanuals.com. All Manuals Search And Download.
|