Operator’s Manual
Invacare®
Pneumatic Oxygen
Conserver
IOC100P
Dealer: This manual MUST be given to the end
user.
User: Before using this product, read this
manual and save for future reference.
For more information regarding
Invacare products, parts, and services,
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TABLE OF CONTENTS
Intended Use........................................................................................ 5
SECTION 3—INSTALLING THE CONSERVING
3
Download from Www.Somanuals.com. All Manuals Search And Download.
REGISTER YOUR PRODUCT
REGISTER YOUR PRODUCT
The benefits of registering include:
1. Safeguarding your investment.
2. Ensuring long-term maintenance and servicing of your product.
3. Receiving updates with product information, maintenance tips
and industry news.
Register ONLINE at warranty.invacare.com
Please have your model number and purchase date available to
complete your registration.
Any registration information you submit will only be used by Invacare
Corporation and protected as required by applicable laws and regulations.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES
SPECIAL NOTES
Signal words are used in this manual and apply to hazards or
unsafe practices which could result in personal injury or
property damage. Refer to the following table for definitions
of the signal words.
SIGNAL WORD
MEANING
DANGER
Danger indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING
CAUTION
Warning indicates a potentially hazardous
situation which, if not avoided, could result
in death or serious injury.
Caution indicates a potentially hazardous
situation which, if not avoided, may result in
property damage or minor injury or both.
Receiving Inspection
Remove product from package and inspect for damage. If
there is any damage, DO NOT use. Contact your dealer/
Home Care equipment provider.
Intended Use
The oxygen conserving regulator is intended for prescription
use only, to be used as part of a portable oxygen delivery
system for patients that require supplemental oxygen in their
home and for ambulatory use.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES
Disposal Instructions
This device and its packaging contain no hazardous materials.
No special precautions need to be taken when disposing the
device and/or it’s packaging.
Principles of Operation
The oxygen conserving regulator is designed to be used with
high pressure oxygen systems. It consists of a cylinder
connection, cylinder contents gauge (if equipped), high to low
pressure regulator, orifice plate and a conserving demand
module. The regulator reduces the high pressure of the
cylinder to the working pressure of the orifice plate. The
orifice plate uses calibrated orifices to deliver a selected flow
to the conserving demand module. The conserving demand
module controls the pulse size and timing to the patient. It
supplies a pulse of oxygen at the beginning of each breath.
This reduces the oxygen demand on the system and limits the
drying of the airways. The flow is determined by setting the
flow control knob to the prescribed flow. The oxygen is
supplied to the patient though the cannula.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES
ꢁ DANGER
DO NOT SMOKE while using this device. Keep all matches,
lit cigarettes or other sources of ignition out of the room in
which this product is located and away from where oxygen is
being delivered.
NO SMOKING signs should be prominently displayed.
Textiles and other materials that normally would not burn are
easily ignited and burn with great intensity in oxygen
enriched air. Failure to observe this warning can result in
severe fire, property damage and cause physical injury or
death.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
INTRODUCTION
The oxygen conserving regulator includes a combination of
low‐pressure regulator and an oxygen conserver, designed
for use with a cylinder as an ambulatory oxygen system. It is
capable of delivering a precise amount of supplemental
oxygen at the optimal point in the breathing cycle. The
conserver greatly increases the efficiency in the delivery of
oxygen, maximizing the beneficial effects and eliminating
unnecessary oxygen waste.
When we breathe, approximately one‐third of the time is
spent inhaling and two‐thirds exhaling. As a result, oxygen
delivered by continuous flow is wasted during exhalation. By
eliminating oxygen flow during exhalation, a two‐thirds
savings is possible. Additionally, the oxygen available during
the very first part of inhalation contributes mostly to meet
oxygen needs. The oxygen conserving regulator takes
advantage of these facts to provide maximum efficiency in the
delivery of oxygen. This device is designed to be an integral
component of a lightweight, long‐lasting ambulatory oxygen
system.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1—GENERAL GUIDELINES
SECTION 1—GENERAL GUIDELINES
When using the oxygen conserving regulator, basic
precautions should ALWAYS be followed, including the
following:
ꢀ WARNING
SECTION 1 ‐ GENERAL GUIDELINES contains important
information for the safe operation and use of this product.
Operating Information
“Caution: Federal law restricts this device to sale by or on the
order of a physician or any other practitioner licensed by the
law of the state in which he/she practices to use or order the
use of this device.”
This product is not intended as a life‐sustaining or
life‐supporting device.
Only personnel instructed and trained in the use of the
oxygen conserving regulators/cylinders should operate this
product.
Product contains magnetic, ferrous material that may affect
the results of an MRI.
Be sure all connections are tight and leak free.
DO NOT use a liquid leak detector to test for leaks.
DO NOT autoclave.
DO NOT gas sterilize with ethylene oxide.
DO NOT clean with aromatic hydrocarbons.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1—GENERAL GUIDELINES
DO NOT attempt to repair product.
DO NOT immerse product in any kind of liquid.
Store product in a clean area when not in use.
NEVER smoke in an area where oxygen is being
administered.
NEVER use aerosol sprays near the equipment.
ALWAYS confirm prescribed dose before administering to
patient and monitor on a frequent basis.
DO NOT use if dirt or contaminants are present on or around
cylinder, valve, product or connecting devices.
Not suitable for use in the presence of flammable anesthetic
mixture.
NEVER use near any type of flame or flammable/explosive
substances, vapors or atmosphere.
ALWAYS follow ANSI and CGA standards for Medical Gas
Products and Flowmeters (E‐7) and Oxygen Handling (G‐4).
NO OXYGEN is delivered when the pointer is aligned with
“Off”.
DO NOT block the outlet fitting or kink the cannula when the
product is in use, this may damage the unit.
The use of this device is limited to the oxygen patient.
Cylinders MUST be used only by the oxygen patient and are
not to be distributed to any other individual for any purpose.
This product is NOT to be used by patients who breathe
through their mouths.
DO NOT use a humidifier with this product.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1—GENERAL GUIDELINES
DO NOT allow cylinders to tip or fall. Secure gas cylinders so
they cannot fall. Ensure cylinder is always in upright position.
DO NOT allow oil from your hands or other sources to come
into contact with the cylinder post valve. These substances
may become flammable in the presence of oxygen and cause
injury. Avoid touching the cylinder post valve whenever
possible. Example of items to avoid are hand creams or
lotions, cooking oils, suntan oils or sun blocks and similar oily
products. If you use these types of products, wash your hands
prior to use. If the bottle fitting should come in contact with
such substances it should be cleaned off with a damp cloth
prior to connecting it to the conserving regulator.
NEVER oil or lubricate the oxygen conserving regulator or
cylinder post valve. NEVER use any penetrating oil or
®
®
lubricant such as WD‐40 or 3‐in‐1 oil . If continued difficulty
is experienced contact your supplier for assistance.
DO NOT store cylinders near sources of heat or flame.
DO NOT use while sleeping without consulting your
healthcare provider.
This product is designed to operate with a standard single
lumen, adult oxygen nasal cannula with a maximum length of
seven feet.
The cannula is for single patient use only.
Cannula MUST be installed on outlet connection prior to use.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1—GENERAL GUIDELINES
DO NOT place the unit under such items as blankets, bed
coverings, chair cushions, clothing and away from heated or
hot surfaces, including space heaters, stoves and similar
electrical appliances. When this product is in use a small
amount of oxygen is vented. With regards to clothing ‐
wearing the unit under clothing may saturate fabrics with
oxygen and cause them to burn rapidly if exposed to sparks
or flame. It may take several hours for oxygen levels in fabrics
to return to normal.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—FEATURES
SECTION 2—FEATURES
ꢁ DANGER
This product is not intended as a life‐sustaining or
life‐supporting device.
CAUTION
Missing or illegible labels MUST be replaced. Contact
customer service at the number on the back page.
Model IOC100P
Cylinder Post Valve
T-Handle Clamp
Cylinder
Alignment
CGA870 Seal
Pins
Washer
Oxygen Pressure
Gauge w/ Rubber
Guard
Selector
Switch
Oxygen
Supply Outlet
Fitting
Vent Hole
FIGURE 2.1 Model IOC100P
Cylinder Post Valve T‐Handle Clamp: This is used to attach
the unit to any CGA870 post‐valve cylinder.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—FEATURES
Oxygen Pressure Gauge: Enables the user to monitor the
contents of the compressed oxygen cylinder and is protected
by a rubber guard.
Selector Switch: Enables the user to select the desired setting,
as well as “OFF” and “CF” (continuous flow). When not in
use, the switch should be turned to the “OFF” position.
Oxygen Supply Outlet: Use this fitting to attach a standard
cannula.
Cylinder Alignment Pins: When assembling the unit, these
parallel pins MUST be inserted into the holes on the CGA870
post valve.
CGA870 Seal Washer [Metal Washer with Viton or
equivalent Seal]: Creates the interface between the post valve
and the conserver regulator. Besides offering a rugged
interface, it also surrounds the oxygen path in a ring of
stainless steel or brass.
Vent Hole: Maintains proper internal pressure. DO NOT
obstruct with any object, such as a label or tight‐fitting
carrying bag.
NOTE: Use only a CGA870 Seal Washer [Metal Washer with Viton
Seal]. DO NOT use a plastic compression gasket.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—FEATURES
FIGURE 2.2 Connection view of the IOC100P with CGA870
Connection
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3—INSTALLING THE CONSERVING REGULATOR
SECTION 3—INSTALLING THE
CONSERVING REGULATOR
ꢀ WARNING
DO NOT allow oil from your hands or other sources to come
into contact with the regulator gasket or cylinder post valve.
These substances may become flammable in the presence of
oxygen and cause injury. Avoid touching the cylinder post
valve whenever possible. Example of items to avoid are hand
creams or lotions, cooking oils, suntan oils or sun blocks and
similar oily products. If you use these types of products, wash
your hands prior to use. If the cylinder post valve should
come in contact with such substances it should be cleaned off
with a damp cloth prior to connecting it to the conserving
regulator.
DO NOT direct flow of oxygen at any person or flammable
material when opening the cylinder.
DO NOT use without CGA870 Seal Washer [Metal washer
with elastomer seal].
DO NOT use plastic yoke seals [Plastic compression gasket].
®
Use CGA870 Seal Washer made of Viton and brass.
The CGA870 Seal Washer supplied with the oxygen
conserving regulator is reusable.
CAUTION
DO NOT use tools to tighten T‐handle, this can lead to over
tightening and will cause damage to the oxygen conserving
regulator.
Ensure all connections are tight and leak free.
DO NOT use liquid leak detector to test for leaks.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3—INSTALLING THE CONSERVING REGULATOR
NOTE: For information on how to operate the cylinder, consult
your equipment provider.
NOTE: For this procedure, refer to FIGURE 3.1.
1. Loosen the cylinder post valve T‐Handle.
2. Lower the conserver over
any CGA870 post valve
cylinder with the
alignment pins toward
the holes on the cylinder
neck.
3. Align the two pins and
gasket with the
FIGURE 3.1 Attaching the
IOC100P to the Cylinder
corresponding holes on
the cylinder post valve.
NOTE: Cylinder post valve T‐Handle should be aligned with
indentation on post valve.
4. While holding the unit in place, tighten the cylinder post
valve by turning clockwise.
5. Attach a standard cannula [7 ft. (2.13 m) or less in length]
to the oxygen supply outlet fitting.
NOTE: Tighten only by hand. The use of a tool to tighten the
T‐Handle may damage the unit.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4—OPERATING INSTRUCTIONS
SECTION 4—OPERATING
INSTRUCTIONS
ꢁ DANGER
NEVER smoke in an area where oxygen is being
administered.
NEVER use near any type of flame or flammable/explosive
substances, vapors or atmosphere.
CAUTION
DO NOT use pediatric, low flow nasal cannulas or oxygen
masks with the oxygen conserving regulator.
DO NOT block the cannula connection or kink cannula tubing
when the oxygen conserving regulator is in use. This may
damage the oxygen conserving regulator.
1. Prior to each use, inspect product for visible damage. DO
NOT use if any damage is found.
ꢀ WARNING
DO NOT direct flow of oxygen at any person, or flammable
material when adjusting the flow dial.
2. Turn the selector switch on the oxygen conserving
regulator to the “0” OFF position before opening the
cylinder valve. FIGURE 4.2 on page 21.
3. To reduce the risk of rapid oxygen recompression and fire,
open the cylinder valve slowly and completely so the
pressure gauge moves slowly as it indicates the cylinder
pressure.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4—OPERATING INSTRUCTIONS
4. Listen for leaks. If a leak is present, close the cylinder
valve, check the CGA870 seal washer, and reinstall. If the
leak persists, DO NOT use the equipment. Contact your
Home Care Provider for repair.
5. Check the oxygen pressure gauge to verify the cylinder
pressure.
6. Ensure that the vent hole on the side of the unit is not
obstructed.
7. Position the cylinder so the oxygen cylinder valve outlet is
pointing away from the user and any other person(s).
8. Attach a standard adult single lumen oxygen nasal
cannula, no longer than seven feet to the product’s outlet
fitting. DO NOT use pediatric, low flow nasal cannulas or
oxygen masks with this product.
NOTE: A unit without cannula attached may pulse if set at position
1‐6.
9. Place the cannula over your ears and position the prongs
in your nose according to the cannula manufacturer’s
instructions, or as instructed by your Health Care
provider. Refer to FIGURE 4.1.
FIGURE 4.1 Cannula Placement
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4—OPERATING INSTRUCTIONS
ꢀ WARNING
NO OXYGEN is delivered in between settings. To obtain
desired flow, the indicating pointer MUST align with a
specific number on the dial.
To avoid injury to patient, ALWAYS confirm prescribed
setting before administering to patient and monitor flow on a
frequent basis.
10. Turn the selector switch until indicating pointer is aligned
with the prescribed setting. FIGURE 4.2 on page 21.
NOTE: The continuous flow setting (CF) is designed for emergency
use only. The amount of oxygen delivered when using the oxygen
conserving regulator in continuous flow mode is preset to 2 L/min.
(liters per minute). Remember that in this mode the oxygen will be
consumed at a much faster rate. Return to another source before
running out of oxygen. FIGURE 4.2 on page 21.
ꢀ WARNING
When pointer on contents gauge enters red zone, it is
recommended to replace or refill the cylinder.
11. Breathe through the nose and feel a pulse of oxygen as you
inhale.
NOTE: When on a pulse setting, there is flow or a pulse only at the
beginning of each breath. If you do not feel the pulse at the beginning
of each breath, check the setting. If there is still no pulse, turn dial to
2 L/min. continuous setting. FIGURE 4.2 on page 21.
NOTE: Because each patient’s breathing pattern is different and the
environment varies, it may be difficult to feel some low setting
pulses.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4—OPERATING INSTRUCTIONS
12. When finished using the system, close the oxygen supply
cylinder valve and continue breathing through the nasal
cannula until no further oxygen flow is detected.
13. Remove the nasal cannula and turn the selector switch to
the “0” OFF position.
14. When not in use, store in a clean, dry location.
Continuous
Flow Setting
(CF)
Selector Switch
FIGURE 4.2 Selector Switch
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5—REMOVING THE CONSERVING REGULATOR
SECTION 5—REMOVING THE
CONSERVING REGULATOR
ꢀ DANGER
NEVER attempt to remove the oxygen conserving regulator
from an oxygen cylinder unless the cylinder valve is
completely closed.
CAUTION
DO NOT try to loosen the T‐handle beyond the stop.
Otherwise, damage to the oxygen conserving regulator will
occur.
NOTE: For information on how to operate the cylinder, consult
your equipment provider.
1. Completely close the oxygen cylinder valve.
2. Turn the oxygen conserving regulator selector switch to 2
L/min. continuous flow position.
3. Wait for oxygen to stop flowing from the oxygen
conserving regulator.
4. Turn the T‐handle to loosen the connection to the post
valve.
5. Remove the oxygen conserving regulator from the post
valve.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6—TYPICAL PRODUCT PARAMETERS
SECTION 6—TYPICAL PRODUCT
PARAMETERS
OXYGEN DELIVERY:
SELECTOR
SWITCH
LITER
FLOW
POSITION
EQUIVALENCY
0
1
2
3
4
5
6
OFF
1
2
3
4
5
6
CONTINUOUS FLOW
EMERGENCY BYPASS
SETTING:
Factory Preset at 2 ± .5 L/min.
REQUIRED OPERATING
PRESSURE:
200 psi to 3000 psi (13.8 bar to 206.8 bar)
REGULATOR:
Built-in, 25 ± 5 psi (1.7 bar ± .34 bar), brass
high pressure with aluminum low
pressure materials
DIMENSIONS:
Weight
Approximately 14.8 ounces (420 grams)
Overall Length
Approximately
5” L (12.7 cm) x 2.5” H (6.4 cm) x 2.5” W
(6.4 cm)
OPERATING CONDI-
TIONS TEMPERATURE:
32°F (0°C) to 122°F (50°C)
OPERATING RELATIVE
HUMIDITY:
15% to 95%
OPERATING ALTITUDE:
0 to 10,000 feet (0 to 3,048 meters)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6—TYPICAL PRODUCT PARAMETERS
STORAGE/
Maximum -40°F (-40°C), 1% RH
TRANSPORTATION:
Maximum 145°F (63°C), 44% RH
SHOCK VIBRATION:
Not to exceed IEC 601-1 requirements
Not to exceed IEC 68-2-6, IEC 68-2-34
No smoking or open flames
Consult accompanying documents
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6—TYPICAL PRODUCT PARAMETERS
Oxygen Cylinder Duration
The total delivery of oxygen via the conserver is related to the
breathing rates, it is user adaptive in that the total oxygen
delivered per minute will automatically adjust with user
need, as expressed by increased or decreased breathing rates.
For example, at all settings, twice as much oxygen per minute
will be delivered if one breathes twenty (20) times per minute
as compared with ten (10) times per minute. Refer to
OXYGEN DURATION TABLE
SETTING
1
2
3
4
5
6
Continuous
Flow
2 L/min.
Cylinder Type
Cylinder
Volume
Liters @
2015 psi
Estimated Cylinder Duration in Hours
(Based on 20 breaths/min.)
M2
36
1.9
.9
.6
.5
.4
.3
.3
M4(A)
M6(B)
ML6
M9(C)
D
113
164
171
246
425
680
5.9 2.9 2.0 1.5 1.2 1.0
8.5 4.3 2.8 2.1 1.7 1.4
8.9 4.5 3.0 2.2 1.8 1.5
.9
1.4
1.4
2.1
3.5
5.7
12.8 6.4 4.3 3.2 2.6 2.1
22.1 11.1 7.4 5.5 4.4 3.7
35.4 17.7 11.8 8.9 7.1 5.9
E
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7—MAINTENANCE
SECTION 7—MAINTENANCE
CAUTION
DO NOT use cleaning solutions.
DO NOT immerse product in any kind of liquid.
All repairs MUST be done by Invacare Corporation.
1. Disconnect all connections before cleaning.
2. After each use, clean exterior of the product with a clean,
lint‐free cloth.
3. Store product in a clean area free from grease, oil, and
other sources of contamination.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8—TROUBLESHOOTING
SECTION 8—TROUBLESHOOTING
If oxygen conserving regulator fails to function, consult the
Troubleshooting guide. If problem cannot be corrected,
consult your Dealer/Home Care equipment provider.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No flow. Unit does not 1. Cylinder valve is
pulse.
1. Turn the cylinder
valve to the “ON”
position.
closed.
2. Regulator in “Off” 2. Set to prescribed
position.
setting.
3. Cylinder empty.
3. Replace cylinder.
4. Oxygen conserving 4. Check position of
regulator not
sensing breath.
cannula in nose. DO
NOT breathe
through mouth.
5. Oxygen cannula is
blocked or kinked.
5. Remove kinks. Clean
or replace, if
necessary.
Unit flows or pulses
continuously.
1. Unit is set to the
“CF” position.
1. Turn the selector
switch to the
appropriate delivery
setting.
2. Unit was not set to 2. Turn the selector
“OFF” prior to
opening the
cylinder valve.
switch to “OFF,” wait
a few moments, then
set at proper delivery
setting.
3. Vent hole is
obstructed.
3. Removeobstructions,
such as labels or
carrying bag, and
resume use as usual.
Replacement Parts - Accessories
HF2POST6BAG Carrying Bag or HF2POST9BAG Carrying
Bag
27
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
NOTES
28
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
NOTES
29
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
LIMITED WARRANTY
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN
DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE
TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of
our products.
This warranty gives you specific legal rights and you may also
have other legal rights which vary from state to state.
Invacare warrants this product to be free from defects in
materials and workmanship for a period of two years from date
of purchase. If within such warranty period any such product
shall be proven to Invacare’s satisfaction to be defective, such
product shall be repaired or replaced, at Invacare’s option. This
warranty does not apply to problems arising from normal wear
and tear or failure to adhere to these instructions, nor does it
include shipping charges incurred in replacement part
installation or repair of any such product. Invacare’s sole
obligation and your exclusive remedy under this warranty shall
be limited to such repair and/or replacement.
For warranty service, please contact the Invacare service
department during normal business hours at the toll-free
telephone number identified on the back cover of this manual.
Upon receiving notice of an alleged defect in a product, Invacare
will issue a serialized return authorization. It shall be the
responsibility of the purchaser to pack the product(s) or part(s)
in an appropriate manner to avoid shipping damage and return
the product(s) or part(s), at the purchaser’s expense, to either
Invacare’s plant or service center as specified by Invacare in
advance. The defective product(s) or component part(s) must
be returned for warranty inspection using the serial number as
identification within 30 days of the return authorization date.
DO NOT return any product(s) or part(s) to our factory or
service center without prior consent. C.O.D. shipments will be
refused – please pre-pay shipping charges.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
LIMITATIONS AND EXCLUSIONS: THE FOREGOING
WARRANTY SHALL NOT APPLY TO SERIAL NUMBERED
PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED
OR DEFACED; PRODUCTS SUBJECTED TO NEGLIGENCE,
ACCIDENT, IMPROPER OPERATION, MAINTENANCE, OR
STORAGE; PRODUCTS MODIFIED WITHOUT INVACARE’S
EXPRESS WRITTEN CONSENT (INCLUDING, BUT NOT
LIMITED TO, MODIFICATION THROUGH THE USE OF
UNAUTHORIZED PARTS OR ATTACHMENTS); PRODUCTS
DAMAGED BY REASON OF REPAIRS MADE TO ANY
COMPONENT WITHOUT THE SPECIFIC CONSENT OF
INVACARE; PRODUCTS DAMAGED BY CIRCUMSTANCES
BEYOND INVACARE’S CONTROL; OR PRODUCTS
REPAIRED BY ANYONE OTHER THAN INVACARE OR AN
INVACARE SERVICE CENTER. SUCH EVALUATION SHALL
BE SOLELY DETERMINED BY INVACARE.
THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE
AND IN LIEU OF ANY OTHER WARRANTIES
WHATSOEVER, WHETHER EXPRESSED OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, AND THE SOLE REMEDY FOR VIOLATIONS OF
ANY WARRANTY WHATSOEVER, SHALL BE LIMITED TO
REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT
PURSUANT TO THE TERMS CONTAINED HEREIN. THE
APPLICATION OF ANY IMPLIED WARRANTY
WHATSOEVER SHALL NOT EXTEND BEYOND THE
DURATION OF THE EXPRESS WARRANTY PROVIDED
HEREIN. INVACARE SHALL NOT BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES
WHATSOEVER.
SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGE, OR LIMITATION OF HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE EXCLUSION AND
LIMITATION MAY NOT BE APPLICABLE.
THIS WARRANTY SHALL BE EXTENDED TO COMPLY
WITH STATE/PROVINCIAL LAWS AND REQUIREMENTS.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Invacare Corporation
USA
All rights reserved. Trademarks are
identified by ™ and ®. All trademarks
are owned by or licensed to Invacare
Corporation or its subsidiaries unless
otherwise noted.
One Invacare Way
Elyria, Ohio USA
44036-2125
800-333-6900
Technical Services
800-832-4707
WD-40 is a registered trademark of
the WD-40 Company.
3-in-1 is a registered trademark of
American Home Products
Distributed by Invacare
Inovo:
Part No 3000373
Rev NC
Corporation.
Viton is a registered trademark of
Dupont Performance Elastomers.
©2009 Invacare Corporation
Part No 1160840
Rev B - 4/09
Download from Www.Somanuals.com. All Manuals Search And Download.
|