Owner’s Operator and Maintenance Manual
Atlas™
DEALER: This manual MUST be given to
the user of the wheelchair.
USER: BEFORE using this wheelchair, read
this manual and save for future reference.
For more information regarding
Invacare products, parts, and services,
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TABLE OF CONTENTS
Weight Training........................................................................................................................................11
Reaching, Leaning Backwards............................................................................................................13
Transferring To and From Other Seats..............................................................................................16
Unfolding................................................................................................................................................17
Inspect/Adjust Initially ...................................................................................................................18
Maintenance Safety Precautions............................................................................................................20
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
TABLE OF CONTENTS
Adjusting Front Caster Height..............................................................................................................27
REGISTER YOUR PRODUCT
The benefits of registering:
1. Safeguard your investment.
2. Ensure long term maintenance and servicing of your purchase.
3. Receive updates with product information, maintenance tips, and industry news.
4. Invacare can contact you or your provider, if servicing is needed on your product.
5. It will enable Invacare to improve product designs based on your input and needs.
- or -
Complete and mail the form on the next page
Any registration information you submit will be used by Invacare Corporation only, and
protected as required by applicable laws and regulations.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT REGISTRATION FORM
Complete and mail this form
Name_______________________________________________________________
Address _____________________________________________________________
City ___________________State/Province __________
Zip/Postal Code ________
Fold
here
Email ___________________________________Phone No. _________________
Invacare Model No. ______________________Serial No. __________________
Purchased From _________________________Date of Purchase:___________
1. Method of purchase: (check all that apply)
❏ Medicare
2. This product was purchased for use by: (check one)
❏ Self ❏ Parent ❏ Spouse ❏ Other
3. Product was purchased for use at:
❏ Home ❏ Facility ❏ Other
4. I purchased an Invacare product because:
❏ Price ❏ Features (list features) _________________________________________
❏ Insurance
❏ Medicaid ❏ Other
__________________________
5. Who referred you to Invacare products? (check all that apply)
❏ Doctor ❏ Therapist ❏ Friend ❏ Relative ❏ Dealer/Provider ❏ Other_________
❏ Advertisement (circle one): TV, Radio, Magazine, Newspaper
❏ No Referral_____
6. What additional features, if any, would you like to see on this product?
__________________________________________________________________________
Fold
here
7. Would you like information sent to you about Invacare products that may be available for a
particular medical condition? ❏ Yes ❏ No
If yes, please list any condition(s) here and we will send you information by email and/or mail about
any available Invacare products that may help treat, care for or manage such condition(s):
__________________________________________________________________________
8. Would you like to receive updated information via email or regular mail about the Invacare
home medical products sold by Invacare's dealers? ❏ Yes ❏ No
9. What would you like to see on the Invacare website?
__________________________________________________________________________
10. Would you like to be part of future online surveys for Invacare products? ❏ Yes ❏ No
11. User's Year of birth: ______________________________________________________
If at any time you wish not to receive future mailings from us, please contact us at Invacare Corporation,
CRM Department, 39400 Taylor Parkway, Elyria, OH 44035, or fax to 877-619-7996 and we will remove
you from our mailing list.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES
SPECIAL NOTES
Signal words are used in this manual and apply to hazards or unsafe practices which
could result in personal injury or property damage. Refer to the following table for
definitions of the signal words.
SIGNAL WORD
MEANING
DANGER
Danger indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
CAUTION
Warning indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
Caution indicates a potentially hazardous situation which, if not avoided, may result in
property damage.
NOTICE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO
CHANGE WITHOUT NOTICE.
WHEELCHAIR USER
As a manufacturer of wheelchairs, Invacare endeavors to supply a wide variety of
wheelchairs to meet many needs of the end user. However, final selection of the
type of wheelchair to be used by an individual rests solely with the user and his/her
healthcare professional capable of making such a selection.
WHEELCHAIR TIE-DOWN RESTRAINTS
Wheelchair users should NOT be transported in vehicles of any kind while in
wheelchairs. As of this date, the Department of Transportation has not approved
any tie-down systems for transportation of a user while in a wheelchair, in a moving
vehicle of any type.
It is Invacare’s position that users of wheelchairs should be transferred into
appropriate seating in vehicles for transportation and use be made of the restraints
made available by the auto industry. Invacare cannot and does not recommend any
wheelchair transportation systems.
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LABEL LOCATION
LABEL LOCATION
IMPORTANT NOTICE
The wheel locks on this wheelchair have been
pre-set at the factory to comply with the
Veterans Administration functional Standard
8320.01 of the Federal Register, paragraph
3.2.4.5.3. If these wheel locks do not meet
your needs, follow instructions below.
!
CAUTION
Any wheel lock adjustments should embed
wheel lock shoe at least 1/8" into tire when
locked (3/16" on pneumatic tires).
INSTRUCTIONS FOR WHEEL
LOCK ADJUSTMENTS
1. Loosen wheel lock mounting fastener,
which runs through mounting bracket and
frame.
2. Slide clamp toward rear wheel until wheel
lock shoe is embedded into tire material at
least 1/8" when handle is engaged to the
lock position (3/16" for pneumatic tires).
3. Tighten mounting fastener to secure
mounting bracket in desired location and
recheck lock shoe embedding.
4. Inspect for correct locking action BEFORE
actual use.
00078X021-0394
Crossmember
Lower
Frame
Tube
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TYPICAL PRODUCT PARAMETERS
TYPICAL PRODUCT PARAMETERS
ATLAS
A18PFR
A18PLR
A18RFR
A18RLR
OVERALL WIDTH:
23 and 25 inches
24¼ and 26¼ inches
OVERALL DEPTH
(WITHOUT FRONT RIGGINGS):
31¼ inches
SEAT WIDTH:
SEAT DEPTH:
18 inches
16 inches
SEAT-TO-FLOOR*
(WITH 24 INCH WHEELS)
POSITION 1:
19 inches
20 inches
POSITION 2:
BACK STYLE:
BACK HEIGHT:
ARM STYLES:
Fixed
Removable
16 inches
Permanent full length; urethane
armpad
Removable desk length; urethane
armpad
FRONT RIGGINGS:
Hemi swingaway Hemi swingaway Hemi swing-
Hemi swingaway
elevating legrests
footrest
elevating legrests away footrest
REAR AXLE:
Single axle
Dual axle
REAR WHEELS:
HANDRIMS:
24-inch composite wheel/solid rubber tire
Composite
Push to lock
8x1-inch solid rubber
Black nylon
WHEEL LOCKS:
CASTER SIZE:
UPHOLSTERY:
FRAME FINISH
WEIGHT** (APPROX.):
Black
38.63 pounds
43.48 pounds
42.48 pounds
47.33 pounds
40.23 pounds
45.08 pounds
36.38 pounds
41.23 pounds
SHIPPING WEIGHT**
(APPROX.):
WEIGHT LIMITATION:
250 lbs (114 kg)
*NOTE: These heights can vary ± ¼ inch due to tire wear and manufacturing tolerances.
**NOTE: Weights based on 18x16 inch wide wheelchair with desk length arms. Weights will vary
depending on wheelchair options.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1—GENERAL GUIDELINES
SECTION 1—GENERAL GUIDELINES
ꢀ WARNING
SECTION 1 - GENERAL GUIDELINES contains important information for the safe
operation and use of this product. DO NOT use this product or any available
optional equipment without first completely reading and understanding these
instructions and any additional instructional material such as owner’s manuals, ser-
vice manuals or instruction sheets supplied with this product or optional equip-
ment. If you are unable to understand the Warnings, Cautions or Instructions,
contact a healthcare professional, dealer or technical personnel before attempting
to use this equipment. Otherwise, injury or damage may occur.
Operating Information
Unless otherwise noted, all service and adjustment should be performed while the
wheelchair is unoccupied.
To determine and establish your particular safety limits, practice bending, reaching and
transferring activities in several combinations in the presence of a qualified healthcare
professional before attempting active use of the wheelchair.
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame rails
are fully seated into the side frame U‐blocks.
Avoid storing or using the wheelchair near open flame or combustible products. Serious
injury or damage to property may result.
ALWAYS use anti‐tippers. When outdoors on wet, soft ground or on gravel surfaces,
anti‐tippers may not provide the same level of protection against tipover. Extra caution
must be observed when traversing such surfaces.
DO NOT traverse, climb or go down ramps or slopes greater than 9°.
DO NOT attempt to move up or down an incline with a water, ice or oil film.
NEVER leave an unoccupied wheelchair on an incline.
DO NOT operate on roads, streets or highways.
DO NOT attempt to ride over curbs or obstacles. Doing so may cause your wheelchair to
tip over and cause bodily harm to you or damage to the wheelchair.
DO NOT attempt to reach objects if you have to move forward in the seat.
DO NOT attempt to reach objects if you have to pick them up from the floor by reaching
down between your knees.
DO NOT lean over the top of the back upholstery to reach objects behind you, as this may
cause the wheelchair to tip over.
DO NOT shift your weight or sitting position toward direction you are reaching as the
wheelchair may tip over.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1—GENERAL GUIDELINES
DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not
brakes.
DO NOT tip the wheelchair without assistance.
DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may
occur.
Before attempting to transfer in or out of the wheelchair, every precaution should be taken
to reduce the gap distance. Turn both casters parallel to the object you are transferring
onto. When transferring to and from the wheelchair, ALWAYS engage both wheel locks.
DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by
means of any removable (detachable) parts of the wheelchair may result in injury to the
user or damage to the wheelchair.
If the wheelchair is exposed to extreme temperature (above 100°F or below 32°F), high
humidity and/or becomes wet, prior to use, ensure that the handgrips do not twist on the
handle. Otherwise, damage or injury may occur.
DO NOT stand on the frame of the wheelchair.
DO NOT stand on the footplates. When getting in or out of the wheelchair, make sure that
the footplates are in the upward position or swing footrests towards the outside of the
wheelchair.
ALWAYS use the handrims for self‐propulsion. DO NOT grip the rear wheels themselves.
ALWAYS keep hands and fingers clear of moving parts to avoid injury.
Weight Training
Invacare does not recommend the use of its wheelchairs as a weight training apparatus.
Invacare wheelchairs have not been designed or tested as a seat for any kind of weight
training. If occupant uses said wheelchair as a weight training apparatus, Invacare shall
not be liable for bodily injury or damage to the wheelchair and the warranty is void.
Weight Limitation
The Atlas wheelchair has a weight limitation of 250 lbs (114 kg).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
SECTION 2—SAFETY/HANDLING OF
WHEELCHAIRS
Safety/Handling of Wheelchairs
Safety and handling of the wheelchair require the close attention of the wheelchair user
as well as the assistant. This manual points out the most common procedures and
techniques involved in the safe operation and maintenance of the wheelchair. It is
important to practice and master these safe techniques until you are comfortable in
maneuvering around the frequently encountered architectural barriers.
Use this information only as a basic guide. The techniques that are discussed on the
following pages have been used successfully by many.
Individual wheelchair users often develop skills to deal with daily living activities that
may differ from those described in this manual. Invacare recognizes and encourages each
individual to try what works best for him/her in overcoming architectural obstacles that
they may encounter. However, all warnings and cautions given in this manual MUST be
heeded. Techniques in this manual are a starting point for the new wheelchair user and
assistant with safety as the most important consideration for all.
Stability and Balance
To assure stability and proper operation of your wheelchair, you MUST maintain proper
balance at all times. Your wheelchair has been designed to remain upright and stable
during normal daily activities as long as you do not move beyond the center of gravity.
Virtually all activities which involve movement in the wheelchair have an effect on the
center of gravity. Invacare recommends using seat/chest positioning straps for additional
safety while involved in activities that shift your weight.
DO NOT lean forward out of the wheelchair any further than the length of the armrests.
Make sure the casters are pointing in the forward position whenever you lean forward.
This can be achieved by advancing the wheelchair and then reversing it in a straight line.
ꢀ WARNING
DO NOT attempt to reach objects if you have to move forward in the seat or pick
them up from the floor by reaching down between your knees.
Many activities require the wheelchair owner to reach, bend and transfer in and out of the
wheelchair. These movements will cause a change to the normal balance, the center of
gravity, and the weight distribution of the wheelchair. To determine and establish your
particular safety limits, practice bending, reaching and transferring activities in several
combinations in the presence of a qualified healthcare professional before attempting
active use of the wheelchair.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
Proper positioning is essential for your safety. When reaching, leaning, or bending
forward, it is important to use the front casters as a tool to maintain stability and balance.
Reaching, Leaning and Bending Forward
ꢀ WARNING
DO NOT attempt to reach objects if
you have to move forward in the seat or
pick them up from the floor by reaching
down between your knees.
NOTE: For this procedure, refer to
FIGURE 2.1.
Position the front casters so that they are
extended as far forward as possible and
engage wheel locks.
Reaching, Leaning Backwards
ꢀ WARNING
DO NOT lean over the top of the back upholstery to reach objects behind you, as
this may cause the wheelchair to tip over.
NOTE: For this procedure, refer to For this procedure, refer to FIGURE 2.2.
Position wheelchair as close as possible to the desired object. Point front casters forward
to create the longest possible wheelbase. Reach back only as far as your arm will extend
without changing your sitting position.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
Coping With Everyday Obstacles
Coping with the irritation of everyday obstacles can be alleviated somewhat by learning
how to manage your wheelchair. Keep in mind your center of gravity to maintain stability
and balance.
A Note to Wheelchair Assistants
When assistance to the wheelchair user is required, remember to use good body
mechanics. Keep your back straight and bend your knees whenever tipping the
wheelchair or traversing curbs, or other impediments.
DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by
means of any removable (detachable) parts of the wheelchair may result in injury to the
user or damage to the wheelchair.
ALWAYS check hand grips for looseness before using the wheelchair. If loose and/or
worn, replace immediately.
When learning a new assistance technique, have an experienced assistant help you before
attempting it alone.
Tipping
ꢀ WARNING
DO NOT tip the wheelchair without assistance.
When tipping the wheelchair, an assistant should grasp the back of the wheelchair on a
non‐removable (non‐detachable) part. Inform the wheelchair occupant before tipping the
wheelchair and remind him/her to lean back. Be sure the occupant’s feet and hands are
clear of all wheels and/or pinch points.
After mastering the techniques of tipping the wheelchair, use the following method to
tackle curbs, short stairs, etc.
Tipping - Curbs
NOTE: For this procedure, refer to FIGURE 2.3.
Place foot on the step tube and begin to tilt the wheelchair toward you. Apply a
continuous downward motion until the balance point is achieved and the front casters
clear the curb. At this point, the assistant will feel a difference in the weight distribution.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
ꢀ WARNING
When lowering the front casters of the
wheelchair, DO NOT let the wheelchair
drop the last few inches to the ground.
This could result in injury to the occu-
pant and/or damage to the wheelchair.
Roll the wheelchair forward and slowly
lower the front of the wheelchair in one
continuous movement onto the sidewalk.
Push the wheelchair forward until the rear
wheels roll up and over the curb.
Step Tube
Stairways
ꢀ WARNING
DO NOT attempt to lift a wheelchair by lifting on any removable (detachable)
parts. Lifting by means of any removable (detachable) parts of the wheelchair may
result in injury to the user or damage to the wheelchair.
ALWAYS check hand grips for looseness before using the wheelchair. If loose
and/or worn, replace immediately.
EXTREME caution is advised when it is necessary to move an occupied wheelchair
up or down the stairs. Invacare recommends that, if possible, the user be removed
from the wheelchair prior to moving. Invacare recommends using two assistants
and making thorough preparations. Make sure to use only secure, non-detachable
parts for hand-held supports.
NOTE: For this procedure, refer to FIGURE 2.4.
Follow this procedure for moving the
wheelchair between floors when an
elevator is not available:
1. If necessary, rotate the anti‐tippers so
the wheels are facing up.
2. After the wheelchair has been tilted
back to the balance point, one assistant
(in the rear) backs the wheelchair up
against the first step, while securely
grasping a non‐removable
(non‐detachable) part of the wheelchair
for leverage.
3. The second assistant, with a firm hold on a non‐detachable part of the framework, lifts
the wheelchair up and over the stair and steadies the wheelchair as the first assistant
places one foot on the next stair and repeats STEP 1.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
4. The wheelchair should not be lowered until the last stair has been negotiated and the
wheelchair has been rolled away from the stairway.
5. If necessary, rotate the anti‐tippers so the wheels are facing down.
Escalators
ꢀ WARNING
DO NOT use an escalator to move a wheelchair between floors. Serious bodily
injury may occur.
Transferring To and From Other Seats
ꢀ WARNING
Before attempting to transfer in or out of the wheelchair, every precaution should
be taken to reduce the gap distance. Turn both casters parallel to the object you are
transferring onto. Also be certain the wheel locks are engaged to help prevent the
wheels from moving.
CAUTION
When transferring, position yourself as far back as possible in the seat. This will help
prevent damaged upholstery and the possibility of the wheelchair tipping forward.
NOTE: For this procedure, refer to FIGURE 2.5.
NOTE: This activity may be performed independently provided you have adequate mobility and
upper body strength.
Position the wheelchair as close as possible
alongside the seat to which you are
transferring, with the front casters
pointing parallel to it. Remove or flip up
the armrest. Engage wheel locks. Swing
away or remove front rigging. Shift body
weight into seat with transfer.
During independent transfer, little or no
seat platform will be beneath you. Use a
transfer board if at all possible.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS
Unfolding and Folding Wheelchair
ꢀ WARNING
ALWAYS keep hands and fingers clear of moving parts to avoid injury.
DO NOT place hand or fingers on the underside of the seat frame rail when opening
or closing the wheelchair.
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat frame
rails are fully seated into the side frame U-blocks.
NOTE: For this procedure, refer to FIGURE 2.6.
NOTE: Invacare recommends that a non‐folding device be installed to keep the wheelchair from
being folded when left unoccupied in a public place.
Unfolding
1. Tilt the wheelchair toward you (raising the opposite wheel and caster off the
ground/floor).
2. Place your hand on the top of the seat
rail closest to you where the seat
upholstery is attached.
3. Point your fingers and thumb to the
inside of the wheelchair.
4. Press downward on the top of the seat rail
until the wheelchair is fully open and the
seat rails are fully seated in the U‐blocks.
5. Engage both wheel locks, open the
footrest/legrest for clearance and transfer
Press DOWN
on Seat Rail
Folding
NOTE: For this procedure, refer to FIGURE 2.7.
1. Swing footrest/legrest and calfpads (if
equipped) in locked position to the
front of the wheelchair.
2. Pivot footplates upward to vertical
position.
3. With both hands, grasp the middle of
the seat upholstery at the front and
back edge and lift up.
4. Continue to close the wheelchair by
grasping the armrest furthest from you
and pulling the armrest toward you.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
SECTION 3—SAFETY
INSPECTION/TROUBLESHOOTING
NOTE: Every six months or as necessary, take your wheelchair to a qualified technician for a
thorough inspection and servicing. Regular cleaning will reveal loose or worn parts and enhance
the smooth operation of your wheelchair. To operate properly and safely, your wheelchair must be
cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your
wheelchair.
Safety Inspection Checklist
Initial adjustments should be made to suit your personal body structure and preference.
Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect for loose or missing hardware on frame and crossbraces.
❑ Inspect for bent frame or crossbraces.
❑ Check that the wheel locks do not interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Check that the wheel locks are easy to engage.
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect the seat and back for rips and sagging.
❑ Inspect the seat and back for loose or broken hardware.
❑ Inspect the back cane hand grips for wear/looseness/deterioration.
❑ Inspect tires for flat spots and wear.
CAUTION
As with any vehicle, check the wheels and tires periodically for cracks and wear.
Replace if damaged.
❑ Check that there is no excessive side movement or binding in the rear wheels when
lifted and spun.
❑ Inspect rear wheels for cracks and wear (hub and rim).
❑ Inspect rear wheels for cracked, bent or broken spokes.
❑ Ensure all spokes are uniformly tight.
❑ Inspect handrims for signs of rough edges or peeling.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
❑ Inspect casters for cracks and wear (hub and rim).
❑ Inspect front casters for cracked, bent or broken spokes.
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure the casters are free of debris.
Inspect/Adjust Weekly
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect tires for flat spots and wear.
❑ Inspect rear wheels for cracked, bent or broken spokes.
❑ Inspect axle assembly for proper tension by spinning caster. Caster should come to a
gradual stop.
❑ Inspect front caster for cracked, bent or broken spokes.
❑ Ensure the casters are free of debris.
Inspect/Adjust Monthly
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Check that the wheel locks do not interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect back cane hand grips for wear/looseness/deterioration.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Check headtube locknuts for tightness.
❑ Ensure the casters are free of debris.
Inspect/Adjust Periodically
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect frame and crossbraces for loose or missing hardware.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
❑ Inspect for bent frame or crossbraces.
❑ Check that wheel locks are easy to engage.
❑ Inspect seat and backs for rips and sagging.
❑ Check that there is no excessive side movement or binding in the rear wheels when
lifted and spun.
❑ Inspect rear wheels for cracks and wear (hub and rim).
❑ Inspect handrims for signs of rough edges or peeling.
❑ Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑ Ensure wheel bearings are clean and free of moisture.
❑ Inspect casters for cracks and wear (hub and rim).
❑ Clean upholstery and armrests.
❑ Check that all labels are present and legible. Replace if necessary.
❑ Ensure the casters are free of debris.
Troubleshooting
Chair
Chair 3 Sluggish Turn or Casters Squeaks Looseness Solutions
Veers Wheels Performance
Flutter
and
in
Right/
Left
Rattles
Chair
Check tires for
correct and equal
pressure.
X
X
X
X
X
X
Check for loose nuts
and bolts.
X
X
Check that rear
wheels are equally
spaced away from seat
frame.
X
X
Maintenance Safety Precautions
ꢀ WARNING
Unless otherwise noted, all service adjustments should be performed while the
wheelchair is unoccupied.
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may result.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
ꢀ WARNING
When cleaning rear cane or hand grip areas use only a clean towel lightly dampened
with cool water. Verify that grips are dry prior to use. Use of soap or ammonia
based cleaning solutions will result in the hand grips sliding off the cane assembly.
Failure to observe this warning may result in injury to the user or bystanders.
Replace any labels that are missing, worn, or torn. Refer to Label Location on
page 8 for a listing of the labels and their locations.
CAUTION
DO NOT overtighten hardware attaching to the frame. This could cause damage to
the frame tubing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4—FRONT RIGGINGS
SECTION 4—FRONT RIGGINGS
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Installing/Removing Front Riggings
NOTE: For this procedure, refer to FIGURE 4.1.
Installing
1. Turn the front rigging to the side (open footplate is perpendicular to wheelchair).
2. Install the front rigging hinge plates onto the hinge pins on the wheelchair frame.
3. Push the front rigging toward the
inside of the wheelchair until it locks
into place.
Release Lever
NOTE: The footplate will be on the inside of the
wheelchair when locked in place.
Swingaway
Footrest
4. Repeat STEPS 1‐3 for the opposite side
of the wheelchair.
5. To release the front rigging, push the
footrest release lever inward, rotate
footrest outward.
Hinge Pins
Hinge Plates
Footplate
Removing
1. Push the release lever inward and
rotate the front rigging outward.
2. Lift up on front rigging and remove from the wheelchair.
3. Repeat STEPS 1‐2 for the opposite side of the wheelchair.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4—FRONT RIGGINGS
Adjusting Footrest Height
NOTE: For this procedure, refer to
Upper
Footrest
Support
1. Loosen, but DO NOT remove, the screw
and locknut that secures the lower
footrest assembly to the upper footrest
support.
Screw
Lower Footrest
Assembly
Locknut
2. Reposition the lower footrest assembly
to the desired height.
3. Securely tighten the screw and locknut
that secures the lower footrest
assembly to the upper footrest support.
4. If necessary, repeat STEP 1‐3 for the
opposite side of the wheelchair.
Raising/Lowering Elevating Legrest Assembly
NOTE: For this procedure, refer to FIGURE 4.3.
1. To raise the elevating legrest, the assistant or user should hold the support tube and
raise the elevating legrests until the desired height is obtained.
2. To lower the elevating legrest, perform the following:
A. Support the user leg with one hand.
B. Push legrest release lever down with other hand.
C. Gently lower user leg down and rest it against the legrest.
Legrest Release Lever
Support Tube
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5—ARMS
SECTION 5—ARMS
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Removing/Installing Armrests (Removable Armrests
Only)
NOTE: For this procedure, refer to FIGURE 5.1.
Removing
1. Press and hold the armrest release button at the front of the armrest.
2. Remove armrest from armrest sockets by pulling straight up on the armrest.
3. Repeat STEPS 1 and 2 for the other armrest.
Installing
1. Position armrest over front and rear armrest sockets.
2. Push the armrest down and evenly at both ends until the front release button snaps
into arm socket hole.
3. Repeat STEPS 1 and 2 for the other armrest.
Armrest
Armrest
Release
Button
Arm
Socket
Arm
Socket
24
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6—BACK
SECTION 6—BACK
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Remove the back for unoccupied transportation purposes only. Securely install the
back onto the wheelchair before use.
Removing/Installing the Back (Removable Back Only)
NOTE: For this procedure, refer to FIGURE 6.1.
1. Remove the two adjustment knobs on the wheelchair frame.
2. Remove the back canes from the wheelchair frame.
NOTE: To install the back, reverse this procedure.
Back
Canes
Wheelchair
Frame
Wheelchair
Adjustment
Frame
Knobs
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 7—REAR WHEELS
SECTION 7—REAR WHEELS
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Removing/Installing Rear Wheels
ꢀ WARNING
Only a qualified technician may change the size of the rear wheel or the
seat-to-floor height.
Make sure both rear wheels are the same size and are installed into the same
respective mounting hole before using the wheelchair. Otherwise, injury may occur.
NOTE: For this procedure, refer to FIGURE 7.1.
1. Remove the dust cap, hex screw, spacer and locknut that secure the rear wheel to the
wheelchair frame.
2. Repeat STEP 1 for the opposite rear wheel.
3. To reinstall the rear wheel(s) onto the wheelchair, reverse STEPS 1‐2.
4. Torque the locknut to 40 ft‐lbs.
Locknut
Axle Mounting Hole
Rear Wheel
Dust Cap
Wheelchair Frame
Spacer
Hex Screw
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 8—FRONT CASTERS
SECTION 8—FRONT CASTERS
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Adjusting Front Caster Height
ꢀ WARNING
Make sure both front casters are the same size and are installed into the same
respective mounting hole before using the wheelchair. Otherwise, injury may occur.
NOTE: For this procedure, refer to FIGURE 8.1.
1. Remove the hex screw, washers and locknut that secure the front caster to the fork.
2. To reinstall the new front caster onto the fork, reverse STEP 1.
Locknut
Fork
Hex
Screw
Front
Caster
NOTE: Adjustable height
fork shown.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 9—WHEEL LOCKS
SECTION 9—WHEEL LOCKS
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Adjusting Wheel Locks
ꢀ WARNING
DO NOT attempt to stop a moving wheelchair with the wheel locks. WHEEL
LOCKS ARE NOT BRAKES.
NOTE: For this procedure, refer to FIGURE 9.1.
1. Ensure the wheel lock is in the open (unlocked position).
2. Loosen the bolt and locknut that secure the wheel lock assembly to the wheelchair
frame.
3. Reposition the wheel lock so that when engaged, the wheel lock shoe embeds the tire
1/8‐inch and holds the wheelchair.
4. Securely tighten the bolt and locknut securing the wheel lock to the wheelchair frame.
5. Engage the wheel lock.
6. Measure the distance the wheel lock is embedded into the tire as shown in detail ʺAʺ
of FIGURE 9.1.
NOTE: Any wheel lock adjustment should embed the wheel lock shoe at least 1/8‐inch into the tire
when engaged.
7. Repeat the STEPS 1‐6 until the wheel lock shoe embeds the tire 1/8‐inch and holds the
wheelchair.
8. Repeat STEPS 1‐7 for the opposite wheel lock.
9. If the measurement of 1/8‐inch cannot be achieved, remove the bolt and locknut that
secure the wheel lock to the wheelchair frame and mount the wheel lock in one of two
mounting positions.
10. Repeat STEPS 1‐9 until the wheel lock holds the wheelchair. If the correct
measurement still cannot be achieved, contact a qualified technician.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 9—WHEEL LOCKS
Mounting
Positions
DETAIL “A” - WHEEL LOCK SHOE
ENGAGEMENT
Bolt and Locknut
Wheel Lock
Handle
1/8-inch
WheelLock
Shoe
Wheel
Lock
Wheel
Lock Shoe
Tire
Rear
Wheel
Tire
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 10—SEAT-TO-FLOOR HEIGHT
SECTION 10—SEAT-TO-FLOOR
HEIGHT
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Changing Seat-To-Floor Height
ꢀ WARNING
Seat-to-floor heights have specific positions depending on rear wheel size, rear
wheel position, and front caster position. These adjustments MUST be performed
by a qualified technician.
NOTE: For this procedure, refer to FIGURE 10.1.
front casters/forks and rear wheels for the desired seat‐to‐floor height.
SEAT-TO-FLOOR
HEIGHT
8-INCH FRONT
CASTERMOUNTING WHEEL SIZE MOUNTING
REAR
REARWHEEL
(IN INCHES)
POSITION
Top
POSITION
Top
19
20
24-inch
24-inch
Bottom
Bottom
4. Reinstall the rear wheels onto the wheelchair in the mounting position indicated in the
chart. Refer to Removing/Installing Rear Wheels on page 26.
5. Re‐install the front casters onto the wheelchair in the mounting position indicated in
the chart. Refer to Adjusting Front Caster Height on page 27.
Rear Wheel Mounting
Positions
Fork Mounting Positions
Top
Top
Bottom
Bottom
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 11—OPTIONS
SECTION 11—OPTIONS
ꢀ WARNING
After any adjustments, repair or service and before use, make sure all attaching
hardware is tightened securely. Otherwise injury or damage may occur.
Installing Anti-Tippers
NOTE: For this procedure, refer to FIGURE 11.1.
1. Remove the rubber tip from the lower frame tube.
2. Slide the anti‐tipper onto the lower frame tube until the anti‐clamp wraps around the
lower frame tube.
3. Tighten the anti‐tipper clamp by turning the locknut counter‐clockwise.
4. Repeat STEPS 1 to 3 for the other anti‐tipper.
Lower
Frame
Tube
Clamp
Anti-Tipper
Locknut
31
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH
FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.
This warranty is extended only to the original purchaser/user of our products.
This warranty gives you specific legal rights and you may also have other legal rights which vary
from state to state.
Invacare warrants this product to be free from defects in materials and workmanship for a
period of one year from date of purchase. If within such warranty period any such product shall
be proven to be defective, such product shall be repaired or replaced, at Invacare’s option. This
warranty does not include any labor or shipping charges incurred in replacement part
installation or repair of any such product. Invacare’s sole obligation and your exclusive remedy
under this warranty shall be limited to such repair and/or replacement.
For warranty service, please contact the dealer from whom you purchased your Invacare
product. In the event you do not receive satisfactory warranty service, please write directly to
Invacare at the address at the bottom of this page. Provide dealer’s name, address, the product
model number, date of purchase, indicate nature of the defect and, if the product is serialized,
indicate the serial number. Do not return products to our factory without our prior consent.
LIMITATIONS AND EXCLUSIONS: THE FOREGOING WARRANTY SHALL NOT APPLY
TO SERIAL NUMBERED PRODUCTS IF THE SERIAL NUMBER HAS BEEN REMOVED OR
DEFACED, PRODUCTS SUBJECTED TO NEGLIGENCE, ACCIDENT, IMPROPER
OPERATION, MAINTENANCE OR STORAGE, PRODUCTS MODIFIED WITHOUT
INVACARE’S EXPRESS WRITTEN CONSENT INCLUDING, BUT NOT LIMITED TO,
MODIFICATION THROUGH THE USE OF UNAUTHORIZED PARTS OR ATTACHMENTS;
PRODUCTS DAMAGED BY REASON OF REPAIRS MADE TO ANY COMPONENT
WITHOUT THE SPECIFIC CONSENT OF INVACARE, OR TO A PRODUCT DAMAGED BY
CIRCUMSTANCES BEYOND INVACARE’S CONTROL, AND SUCH EVALUATION WILL
BE SOLELY DETERMINED BY INVACARE. THE WARRANTY SHALL NOT APPLY TO
PROBLEMS ARISING FROM NORMAL WEAR OR FAILURE TO ADHERE TO THESE
INSTRUCTIONS.
THE FOREGOING EXPRESS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER
WARRANTIES WHATSOEVER, WHETHER EXPRESS OR IMPLIED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, AND THE SOLE REMEDY FOR VIOLATIONS OF ANY WARRANTY
WHATSOEVER, SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE DEFECTIVE
PRODUCT PURSUANT TO THE TERMS CONTAINED HEREIN. THE APPLICATION OF
ANY IMPLIED WARRANTY WHATSOEVER SHALL NOT EXTEND BEYOND THE
DURATION OF THE EXPRESS WARRANTY PROVIDED HEREIN. INVACARE SHALL NOT
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
THIS WARRANTY SHALL BE EXTENDED TO COMPLY WITH STATE/PROVINCIAL
LAWS AND REQUIREMENTS.
Invacare Corporation
USA
Canada
One Invacare Way
Elyria, Ohio USA
44036-2125
570 Matheson Blvd E Unit 8 Invacare, the Medallion Design, and Yes,
Mississauga Ontario
L4Z 4G4 Canada
800-668-5324
you can. are registered trademarks of
Invacare Corporation.
800-333-6900
Atlas is a trademark of Invacare
Corporation.
© 2006 Invacare Corporation
PRODUCT MADE
IN CHINA
Part No. 1130169
Rev A - 6/23/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|