GEQ-1231D
Stereo 31-Band Graphic Equalizer with HC/LC and Limiter
GEQ-2231D
Dual 31-Band Graphic Equalizer with HC/LC and Limiter
Copyright 2004 Inter-M Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Welcome
Congratulations on your purchase of the GEQ-1231D/GEQ-2231D, a state-of-the-art
digital graphic equalizer with extended frequency range. The GEQ-1231D/GEQ-2231D is
the result of a professional collaboration between two audio industry leaders: Inter-M,
known for a wide range of high-quality professional audio equipment, and Algorithmix,
one of the foremost developers of signal processing and DSP hardware.
Thanks to superior 64kHz Codec technology and ultra-low-noise digital filters, the GEQ-
1231D/GEQ-2231D delivers warm analog sound with the benefits of a digital feature set.
The GEQ-1231D/GEQ-2231D are part of the 3E Tools family of Excellent Sound in an Easy-
to-use Interface at an Economical price.
A personal welcome to you from the management and employees of Inter-M
All of us here at Inter-M are dedicated to providing you with the highest quality products
and the best value.
We sincerely trust this product will provide you with years of satisfactory service, but if
anything is not to your complete satisfaction, we will endeavor to make things right.
Welcome to Inter-M, and thank you for becoming a part of our worldwide extended
family!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Unpacking
Although your GEQ-1231D/GEQ-2231D is neither complicated nor difficult to operate, we
recommend you take a few minutes to read this brief manual and familiarize yourself
with the important information regarding product features, setup and operation.
As with most electronic devices, we strongly recommend you retain the original
packaging. In the unlikely event the product must be returned for servicing, the original
packaging (or reasonable equivalent) is required.
Warnings
Environment
Never place this product in an environment that could alter its performance or reduce its
service life. Such environments are usually characterized by high levels of heat, dust,
moisture, or vibration.
Safety
1. Read these instructions carefully.
2. Follow all instructions.
3. Keep all warnings.
4. Do not operate this apparatus near water.
5. Clean only with a damp cloth.
6. Do not block any of the ventilation openings.
7. Install only in accordance with the instructions in this manual.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized
plug has two blades, with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong is provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where it is attached to the apparatus.
11. Use only the attachments/accessories specified.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
12. Use only with a cart, stand, tripod, bracket, or table specified, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid overturning.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Operation
Make certain that speakers and input sources are properly connected before switching
on.
Keep volume levels at minimum gain before switching on.
NOTE: The system’s operation is delayed by approximately three seconds after pressing
the AC Mains power switch. This is due to the built-in protection circuitry, designed to
protect speakers and other system components.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Features
•
Traditional warm analog sound coupled with state-of-the-art
digital signal processing
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Balanced XLR & 1/4 TRS inputs and outputs (unbalanced compatible)
Stereo 31-Band graphic equalizer in a compact 1RU form factor (GEQ-1231D)
Dual-Channel 31-Band graphic equalizer in a compact 2RU form factor (GEQ-2231D)
Constant-Q 1/3-Octave low-noise digital filter bank
5-LED input signal level display with peak indicator
Selectable GEQ range: ±12dB, ±6dB and -12dB(cut only)
High-cut filter for hiss seduction
Low-cut filter for rumble suppression
Reliable peak limiter with threshold and 3-LED gain reduction meter
Permanent stereo channel link
Soft-clip function
Output clip indicator
ON indicators for low-cut, high-cut, and limiter
Extended frequency response(up to 31.5kHz)
Hard bypass relays
High-resolution processing engine: 24-Bit AD/DA converters, 64 kHz sampling
frequency, 40-bit Internal signal path
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Front Panel Controls
1. EQ Cut/Boost Controls
Separate Cut/Boost sliders are provided for each of the 31 1/3-octave frequency
bands. Each slider covers a maximum cut/boost range of ±12dB or ±6dB,
depending on the position of the Range switch (3).
In the GEQ-1231D, each slider controls the level of both left and right channels.
In the GEQ-2231D, two rows of sliders are provided to allow independent control
of both channels. If the CH LINK button (7) is active, only the upper row of sliders is
active, affecting both channels simultaneously.
For certain applications (e.g., sound reinforcement), a cut-only mode is
preferable. Pressing the Cut Only button (4) will activate this mode, effectively
doubling the resolution of the slider adjustment. Depending on the position of the
Range switch (3), the range in cut-only mode is either 0 to –12dB or 0 to –6db.
NOTE that in cut-only mode, all sliders must be in the upper position to achieve
flat frequency response. (The corresponding level scale for cut-only mode is
indicated in red on the front panel.)
2. Input Gain Control and Input Level Meter
The Input Gain Control allows for optimal gain adjustment and highest sonic
quality. Optimal dynamic range is achieved in the 0dB position. Therefore it is
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
important to achieve sufficient signal level to light all green and yellow LEDs of
the Input Level Meter. Avoid lighting the red (overload) LEDs except on rare
occasions and for short duration.
If the source level is too low, input gain may be increased with the Input Gain
Control, with only minimal signal degradation.
For more information on setting up input/output gain structure, see the notes on
Unity Gain mode in the DIP Switch Selector section on page 11.
In the GEQ-1231D, a single Input Gain Control is provided.
In the GEQ-2231D, two independent Range switches are provided.
3. Range Switch
The Range switch selects the operational mode of the 31 frequency-band slider
controls, which can operate over a ±12dB or ±6dB range. The ±6dB range will
provide a more precise range of adjustment, and is sufficient for most
applications.
In the GEQ-2231D, two independent Range switches are provided.
4. Cut-Only Switch
When this switch is activated, the 31 frequency-band slider controls will function
as attenuators (no EQ boost), from 0dB (flat) to –6dB or –12dB, depending on the
position of the Range Switch (3). The corresponding level scale for cut-only mode
is indicated in red on the front panel.
Cut-only mode is particularly useful in notching out specific frequencies for
feedback reduction.
In the GEQ-2231D, two independent Cut-Only switches are provided.
5. Bypass Switch
This switch functions as a true hardware bypass – that is, it directly connects the
unit’s inputs and outputs, and is therefore useful in the event of a power outage.
The Bypass Switch is useful for quick comparison of the original sound with EQ’ed
sound.
In the GEQ-2231D, two independent Bypass switches are provided.
6. Limiter Link Switch (GEQ-2231D only)
This switch will couple the peak limiter modules in both channels of the GEQ-
2231D for stereo operation. The limiter circuitry in each channel still functions
independently, but the higher gain reduction is applied synchronously to both
channels.
When Limiter Link is deactivated, both channels function independently, in dual-
mono mode.
7. Channel Link Switch (GEQ-2231D only)
This switch will allow the GEQ-2231D to function in stereo mode. When the
Channel Link Switch is activated, the integrated LED will light, and the tone
control and limiter functions of both channels will function synchronously. The
lower row of controls is deactivated, with all EQ functions governed by the upper
row of controls, and the Limiter Link Switch (6) is automatically activated.
8. Low-Cut Filter Frequency Control
This knob controls the range of the low-cut filter, from approximately 12.5Hz to
200Hz. The filter is designed to aid in cutting unwanted low frequencies, such as
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
rumbles and wind noise, while leaving other frequencies unaffected. When the
filter is activated the associated LED lights. Rotating the knob to the Off position
removes the filter completely from the signal path.
The GEQ-1231D has only one low-cut filter control for both channels, while the
GEQ-2231D provides independent controls for each channel.
9. High-Cut Filter Frequency Control
This knob controls the range of the high-cut filter, from approximately 3.3kHz to
29.5kHz. The filter is designed to aid in cutting unwanted high frequencies, such as
hiss and noise from other equipment, while leaving other frequencies unaffected.
When the filter is activated the associated LED lights. Rotating the knob to the Off
position removes the filter completely from the signal path.
The GEQ-1231D has only one high-cut filter control for both channels, while the
GEQ-2231D provides independent controls for each channel.
10. Limiter (Threshold) Control
This knob controls the Threshold level of the integrated peak limiter circuitry. The
GEQ-1231D/2231D is equipped with a state-of-the-art digital peak limiter, utilizing
look-ahead circuitry, soft clipping function and automatic, source-dependent
attack and release time calculation to maximize its effectiveness in critical
dynamic usage.
The Threshold level can be set within a range of 0dB to +19dB, referenced to the
output level. When the signal peak exceeds the threshold, the gain will be
decreased to avoid overload and clipping. Rotating the Threshold level to the
extreme right position will switch off the limiter circuitry.
A soft-clipping function is provided after the limiter circuitry, providing a much
smoother limiting function more closely resembling an analog limiter. It is
activated when very sharp (usually non-audio) transients such as clicks and spikes
appear at the unit’s inputs. Its operation is indicated by the Out Clip LED (12).
The GEQ-2213D is equipped with two independent Threshold controls, while the
GEQ-1231D utilizes a single control for both channels.
11. Gain Reduction Meter
The Gain Reduction Meter monitors the activity of the limiter, displaying the
degree of attenuation. For best performance do not allow reduction to exceed –
3dB.
12. Out Clip Indicator
This LED lights when the output signal has reached the soft clipping threshold
beginning at –1dB, typically corresponding to 19dBu on the analog outputs. While
occasional flashing of this indicator is acceptable, frequent or steady lighting
indicates clipping, in which case it is advisable to lower the input gain or raise the
limiter threshold.
13. Power Switch
This switch is used to switch the unit on and off. When the unit is on, the integrated
Power Indicator LED is lit.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Rear Panel Controls
1. XLR Input Connectors
Balanced three-pin XLR connectors.
2. TRS Input Connectors
Balanced three-conductor 1/4" TRS connectors.
3. Input Ground Lift Switch
In the Lift position this switch is useful in eliminating ground loops and other
electrically induced hum from equipment connected to the unit’s inputs.
4. XLR Output Connectors
Balanced three-pin XLR connectors.
5. TRS Output Connectors
Balanced three-conductor 1/4" TRS connectors.
6. Output Ground Lift Switch
In the Lift position this switch is useful in eliminating ground loops and other
electrically induced hum from equipment connected to the unit’s outputs.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
7. AC Power Input
Connect a standard three-pin AC cable to this connector.
8. Dip Switch Selector
The four-bit DIP Switch provides additional features to tailor the unit to a specific
system environment. Bits 1 through 3 address output gain attenuation and unity-
gain mode. Bit 4 addresses locking the front-panel settings.
Pin Number
Attenuation/
Maximum Output Level
0dB/20dBu
1
2
3
4
X
X
X
X
X
X
X
X
OFF
ON
OFF
ON
OFF
ON
OFF
ON
X
OFF
OFF
ON
OFF
OFF
ON
ON
ON
X
OFF
OFF
OFF
OFF
ON
ON
ON
ON
X
-3dB/17dBu
-6dB/14dBu
-9dB/11dBu
-12dB/8dBu
-15dB/5dBu
-18dB/2dBu
Unity Gain
Device Lock
ON
The Device Lock function is useful for protecting the unit against unwanted or
unauthorized changes. Setting Device Lock will activate the Lock LED on the front
panel; any adjustment of front panel controls has no effect. NOTE that if Device
Lock is deactivated the unit will immediately readjust to the actual parameters
reflected on the front panel.
The three-bit Output Level Attenuator is used to select the nominal maximum
output level and increase headroom. When working with very high input levels,
excessive clipping and limiting may result when boosting particular frequencies.
While it is possible to increase headroom by decreasing the input level, this will
also decrease signal-to-noise ratio and degrade the input signal. By adjusting the
maximum output level with the DIP switch, internal headroom may be increased,
thereby creating more range before the limiting and clipping circuitry are
activated.
The GEQ-1231D/2231D provides another very unique feature, unity-gain mode. In
unity-gain mode, output level is always equal to input level (assuming all EQ
controls are set flat), allowing for optimal use of the unit’s internal dynamic range.
When in unity-gain mode, the Input Gain slider becomes a Sensitivity control,
providing sufficient headroom for EQ boost of up to 12dB.
TIP: When utilizing EQ to compensate for acoustic problems and eliminate
feedback, it is always best to use EQ cut, rather than boost.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Applications
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
14
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Block Diagram (GEQ-1231D)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Block Diagram (GEQ-2231D)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Specifications
ELECTRICAL
Analog Input
XLR and 1/4" TRS, Electronically Balanced, RF filtered, Fully Unbalanced Compatible
Impedance
>10kΩ
Maximum Input Level
20dBu
Analog Output
XLR and 1/4" TRS, Electronically Balanced, RF filtered, Fully Unbalanced Compatible
Impedance
<100kΩ
Maximum Output Level @ >600Ω
DIP Switch Selectable Output Attenuator
20dBu
20dBu to 2dBu and Unity-Gain in 3dB steps
Graphic Equalizer
31-Band, 1/3 Octave, Constant-Q Filter
Selectable Boost/Cut Range
Input Gain Control
±12dB, ±6dB, 0 to -12dB, 0 to -6dB (cut only)
0 to +18dB
Six-LED Input Level Meter
-40dBu, -24dBu, -15dBu, -8dBu, -3dBu,
Peak (> +18dBu)
Cut Filters
Low-Cut Frequency Range
High-Cut Frequency Range
Slope
12.5Hz – 200Hz
3.3kHz – 29.5kHz
18dB/octave Butterworth
Peak Limiter
Type
Threshold
Maximizer with Soft Clip
0 – 18dBF s
Three-LED Gain Reduction Meter
Output Clip Indicator
1, 3, 6dB
> +20dBu
System Performance
Frequency Response (-0.5dB)
Dynamic Range
10Hz – 31.5kHz
-95dB, A-weighted
< 0.003%
THD+N
GENERAL
Power Source
Power Consumption
Weight
100 –240VAC, 50/60Hz
10W
GEQ-1231D: 3.5 Kg (7.7 lbs)
GEQ-2231D: 5 Kg (11 lbs)
GEQ-1231D: 482(W) x 44(H) x 280(D) mm
19(W) x 1.75(H) x 11(D) in.
GEQ-2231D: 482(W) x 88(H) x 280(D) mm
19(W) x 3.5(H) x 11(D) in.
Dimensions
Specifications and design subject to change without notice for improvements.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
GEQ-1231D/GEQ-2231D
31-Band Graphic Equalizer/Limiter
Inter-M, Ltd. (Korea) began operations in 1983.
Since then, Inter-M has grown to become one of the largest manufacturers
of professional audio and commercial sound electronics equipment in the world.
Inter-M has gained worldwide recognition for its own branded products,
as well as private label manufacturing of electronics sold under other names (OEM).
The company is no longer just a Korean company, but rather a global company
that is truly international in scope, with factories and offices in Korea and China,
and sales and marketing operations located in Japan, Europe, and the U.S.A.
With more than 850 employees around the globe, Inter-M is well-poised for further growth and
expansion.
INTER-M AMERICAS, INC.
1 EAST BEACON LIGHT LANE, CHESTER, PA, USA 19013-4409
TEL: (610) 874-8870, FAX: (610) 874-8890
INTER-M Corporation
SEOUL OFFICE: 653-5 BANGHAK-DONG, DOBONG-KU, SEOUL, KOREA
TEL: 82-2-2289-8140~8, FAX: 82-2-2289-8149
0704GEQ12131D2231D
PRINTED IN KOREA
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|
