Intel® Desktop Board D945PVS
Product Guide
Order Number: C98673-003
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
This Product Guide gives information about board layout, component installation, BIOS update,
and regulatory requirements for Intel® Desktop Board D945PVS.
Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for general
audiences.
Use Only for Intended Applications
All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in
personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar
locations. The suitability of this product for other PC or embedded non-PC applications or other
environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported
without further evaluation by Intel.
Information Layout
The chapters in this Product Guide are arranged as follows:
board and other hardware components.
Conventions
The following conventions are used in this manual:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Terminology
The table below gives descriptions to some common terms used in the product guide.
Term
GB
Description
Gigabyte (1,073,741,824 bytes)
Gigahertz (one billion hertz)
Kilobyte (1024 bytes)
GHz
KB
MB
Megabyte (1,048,576 bytes)
Megabit (1,048,576 bits)
Megahertz (one million hertz)
Mbit
MHz
Box Contents
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Intel® Desktop Board
I/O shield
One ATA-66/100 cable
Eight locking Serial ATA cables
Two Serial ATA power cables
One floppy cable
One rear panel USB 2.0/IEEE 1394a adapter
One front panel USB 2.0/IEEE 1394a/audio adapter
Intel® Express Installer Driver CD-ROM
Intel® Express Installer Software DVD-ROM
Floppy disk with RAID driver
Back panel audio covers
Quick Reference poster
Integration Guide poster
Printed Product Guide
Game flyer
Configuration and battery caution statement label
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1 Desktop Board Features
Supported Operating Systems ............................................................................................10
Desktop Board Components ...............................................................................................11
Processor............................................................................................................................13
Main Memory ......................................................................................................................14
Intel® 945P Express Chipset ...............................................................................................15
Graphics Subsystem...........................................................................................................15
Audio Subsystem ................................................................................................................15
Input/Output (I/O) Controller................................................................................................16
LAN Subsystem ..................................................................................................................16
LAN Subsystem Software...........................................................................................16
RJ-45 LAN Connector LEDs.......................................................................................16
Hi-Speed USB 2.0 Support..................................................................................................17
Enhanced IDE Interface ......................................................................................................17
Serial ATA...........................................................................................................................17
Expandability.......................................................................................................................18
BIOS ...................................................................................................................................18
Serial ATA and IDE Auto Configuration ......................................................................18
PCI and PCI Express Auto Configuration ...................................................................18
Security Passwords....................................................................................................18
Chassis Intrusion.................................................................................................................19
Power Management Features .............................................................................................19
ACPI...........................................................................................................................19
Power Connectors......................................................................................................19
Fan Connectors..........................................................................................................19
Suspend to RAM (Instantly Available PC Technology) ...............................................20
Wake from USB..........................................................................................................21
Wake from PS/2 Keyboard/Mouse..............................................................................21
PME# Wakeup Support..............................................................................................21
Speaker...............................................................................................................................21
Battery.................................................................................................................................21
Real-Time Clock..................................................................................................................21
2 Installing and Replacing Desktop Board Components
Before You Begin................................................................................................................23
Installation Precautions .......................................................................................................24
Installation Instructions........................................................................................................24
Ensure Electromagnetic Compatibility (EMC) Compliance..........................................24
Chassis and Component Certifications.......................................................................25
Prevent Power Supply Overload.................................................................................25
Place Battery Marking ................................................................................................25
Use Only for Intended Applications.............................................................................26
Installing the I/O Shield .......................................................................................................26
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing and Removing the Desktop Board........................................................................27
Installing and Removing a Processor ..................................................................................28
Installing a Processor .................................................................................................28
Installing the Processor Fan Heat Sink.......................................................................31
Connecting the Processor Fan Heat Sink Cable.........................................................31
Removing the Processor ............................................................................................31
Installing and Removing Memory ........................................................................................32
Installing DIMMs.........................................................................................................34
Removing DIMMs.......................................................................................................35
Installing and Removing a PCI Express x16 Card ...............................................................36
Installing a PCI Express x16 Card ..............................................................................36
Removing the PCI Express x16 Card .........................................................................36
Connecting the IDE Cable...................................................................................................37
Connecting the Serial ATA (SATA) Cable ...........................................................................38
Connecting Internal Headers...............................................................................................39
Connecting USB 2.0 Headers.....................................................................................41
Connecting IEEE 1394a Headers...............................................................................41
Connecting the Front Panel Header ...........................................................................41
Installing the Rear Panel USB 2.0 and IEEE 1394a Adapters.....................................42
Installing the Front Panel USB/IEEE 1394a/Audio Solution ........................................43
Connecting Fan and Power Cables.....................................................................................44
Connecting Fan Cables..............................................................................................44
Connecting Power Supply Cables ..............................................................................45
Other Connectors................................................................................................................46
Setting the BIOS Configuration Jumper...............................................................................47
Clearing Passwords ............................................................................................................48
3 BIOS
Updating the BIOS with the Intel® Express BIOS Update Utility...........................................55
Updating the BIOS with the Iflash Memory Update Utility....................................................56
Obtaining the BIOS Update File..................................................................................56
Updating the BIOS......................................................................................................56
Recovering the BIOS..................................................................................................57
4 Configuring for RAID (Intel® Matrix Storage Technology) Requires
Microsoft Windows* XP or 2000 and SATA Hard Drive(s)
Configuring the BIOS for Intel Matrix Storage Technology..........................................59
Creating Your RAID Set .............................................................................................59
Loading the Intel Matrix Storage Technology RAID Drivers and Software ..................59
Setting Up a “RAID Ready” System............................................................................60
A Error Messages and Indicators
BIOS Beep Codes...............................................................................................................61
BIOS Error Messages .........................................................................................................61
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
B Regulatory Compliance
Safety Regulations..............................................................................................................63
European Union Declaration of Conformity Statement ........................................................63
Product Ecology Statements ...............................................................................................65
Lead-Free Desktop Board ..........................................................................................68
EMC Regulations ................................................................................................................69
Product Certification Markings (Board Level) ......................................................................70
Figures
1. Desktop Board D945PVS Components ........................................................................11
2. LAN Port LED Locations...............................................................................................16
3. Location of Standby Power Indicator.............................................................................20
4. Installing the I/O Shield.................................................................................................26
6. Lift Socket Lever...........................................................................................................28
7. Lift the Load Plate and Don’t Touch the Socket Contacts .............................................28
8. Remove the Protective Socket Cover ...........................................................................29
10. Install Processor...........................................................................................................30
11. Close the Load Plate ....................................................................................................30
12. Connecting the Processor Fan Heat Sink Cable to the Processor Fan Connector ........31
13. Dual Configuration Example 1 ......................................................................................32
14. Dual Configuration Example 2 ......................................................................................32
15. Dual Configuration Example 3 ......................................................................................33
16. Installing a DIMM..........................................................................................................34
17. Inserting a PCI Express x16 Card.................................................................................36
18. Connecting the IDE Cable ............................................................................................37
19. Connecting the Serial ATA Cable .................................................................................38
20. Internal Headers...........................................................................................................39
22. Connecting the Front Panel USB/IEEE 1394a/Audio Cables ........................................43
23. Location of Fan Headers...............................................................................................44
24. Connecting 2x12 Power Supply Cables........................................................................45
25. Location of Other Connectors on Desktop Board D945PVS .........................................46
26. Location of the BIOS Configuration Jumper..................................................................47
27. Removing the Battery ...................................................................................................53
28. F2 Key..........................................................................................................................55
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Tables
1. Feature Summary...........................................................................................................9
2. Desktop Board D945PVS Components ........................................................................12
3. Power Supply Requirements.........................................................................................13
4. RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs..........................................17
6. AC ’97 Audio Header Signal Names .............................................................................40
7. USB 2.0 Header Signal Names.....................................................................................41
8. IEEE 1394a Header Signal Names...............................................................................41
9. Front Panel Header Signal Names................................................................................41
10. Jumper Settings for the BIOS Setup Program Modes...................................................47
11. Beep Codes..................................................................................................................61
12. BIOS Error Messages...................................................................................................61
13. Safety Regulations........................................................................................................63
14. Lead-Free Board Markings ...........................................................................................68
15. EMC Regulations..........................................................................................................69
16. Product Certification Markings ......................................................................................70
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Desktop Board Features
summarizes the major features of the desktop board.
Table 1.
Feature Summary
ATX (12.00-inches by 9.60-inches)
Form Factors
Support for an Intel® processor in the LGA775 package
• Four 240-pin, 1.8 V SDRAM Dual Inline Memory Module (DIMM) sockets
• 667/533 MHz single or dual channel DDR2 SDRAM interface
• Designed to support up to 4 GB of system memory
NOTE: System resources (such as PCI and PCI Express*) require physical
memory address locations that reduce available memory addresses above 3 GB.
This may result in less than 4 GB of memory being available to the operating
system and applications. For the latest list of tested memory, refer to the Intel
Intel® 945P Express Chipset consisting of:
• Intel® 82945P Memory Controller Hub (MCH) with Direct Media Interface
• Intel® 82801GR I/O Controller Hub (ICH7R) supporting Intel® Matrix Storage
Technology
• Firmware Hub (FWH)
• Intel 945P Express Chipset
• Intel® High Definition Audio interface
• Four PCI bus add-in card connectors (SMBus routed to PCI bus 2)
• One PCI Express x16 connector
• Two PCI Express x1 connector
• Up to eight USB 2.0 ports:
⎯
Four ports routed to the back panel
⎯
Four ports routed to two USB headers
• Up to three IEEE-1394a ports:
⎯
One port routed to the back panel
⎯
Two ports routed to two IEEE-1394a headers
• Intel® 82573V Gigabit Ethernet Controller with RJ-45 connector
• Four Serial ATA (SATA) channels (3.0 Gb/s), via the ICH7R, one device per
channel
• One IDE interface with ATA-66/100 support (two devices)
• One diskette drive interface
• One parallel port
• One serial port
• PS/2* keyboard and mouse ports
continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Table 1.
Feature Summary (continued)
• Intel® Platform Innovation Framework for extensible firmware interface
• 4 Mbit symmetrical flash memory
• Support for SMBIOS
• Intel® Rapid BIOS Boot
• Intel® Express BIOS Update
• Support for Advanced Configuration and Power Interface (ACPI)
• Suspend to RAM (STR)
• Wake on USB, PCI, PCI Express, PS/2, LAN, and front panel
Hardware monitor with:
• Three fan sensing inputs used to monitor fan activity
• Remote diode temperature sensing
• Intel® Precision Cooling Technology fan speed control
• Voltage sensing to detect out of range values
Related Links:
For more information about desktop board D945PVS, including the Technical Product
Specification (TPS), BIOS updates, and device drivers, go to:
Supported Operating Systems
The desktop board supports the following operating systems:
•
•
•
•
Microsoft Windows* 2000
Microsoft Windows XP Professional,
Microsoft Windows XP Home
Microsoft Windows XP Microsoft Media Center Edition 2005
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Desktop Board Components
Figure 1 shows the approximate location of the major components on desktop board D945PVS.
IEEE
1394
Line In
Optical Line Out
(Toslink)
D
B
C
A
E
F
T
S
G
H
Intel R
82945
(MCH)
Intel R
(ICH7R)
Channel A DIMM 0
Channel A DIMM 1
82801
R
Channel B DIMM 0
Channel B DIMM 1
Q
P
L
M
J
I
K
O
N
OM17669
Figure 1. Desktop Board D945PVS Components
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Table 2.
Desktop Board D945PVS Components
Label
A
Description
Auxiliary rear chassis fan header 1 (4-pin, fan speed control)
PCI Express x1 connectors
B
C
D
E
Front panel audio header
PCI Express x16 connector
12 V processor core voltage connector (2x2)
Rear chassis fan header 1 (3-pin, fan speed control)
Processor socket (LGA775)
Processor fan header (4-pin, fan speed control)
Main power connector (2x12)
Diskette drive connector
F
G
H
I
J
K
IDE connector
L
Front chassis fan header (3-pin, fan speed control)
BIOS configuration jumper block
Chassis intrusion header
M
N
O
P
Serial ATA connectors
Front panel header
Q
R
S
Alternate power LED header
Hi-speed USB 2.0 headers
IEEE1394a headers
T
PCI bus add-in card connectors
Related Links:
Go to the following links for more information about:
•
Desktop board D945PVS
•
•
•
Supported processors
Audio software and utilities
LAN software and drivers
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Processor
CAUTION
Failure to use the appropriate power supply (below) and/or not connecting the 12 V (2x2) power
connector to the desktop board may result in damage to the board or the system may not function
properly.
Table 3. Power Supply Requirements
Platform Compatibility Guide
Power Supply Requirements
05B
12V2 rating of 16 A continuous and 19 A peak current for 10mS
12V2 rating of 13 A continuous and 16.5 A peak current for 10mS
ATX12V (version 2.0 or greater) compliant Power Supply
05A
04B or 04A
Desktop board D945PVS supports an Intel processor in the LGA775 package. Processors are not
included with the desktop board and must be purchased separately. The processor connects to the
desktop board through the LGA775 socket.
The supported processors list for desktop board D945PVS is located on the web at:
Related Links:
Go to the following links or pages for more information about:
•
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Main Memory
NOTE
To be fully compliant with all applicable Intel® SDRAM memory specifications, the board should
be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your
memory modules do not support SPD, you will see a notification to this effect on the screen at
power up. The BIOS will attempt to configure the memory controller for normal operation.
The desktop board supports dual or single channel memory configurations and the following:
•
Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Modules (DIMMs)
connectors
•
•
•
•
•
Unbuffered, non-registered single or double-sided DIMMs
Serial Presence Detect (SPD) memory only
Non-ECC RAM
1.8 V, 1.9 V, and 2.0 V memory
Memory configuration listed below:
⎯ Up to 2.0 GB utilizing 256 Mb technology
⎯ Up to 4.0 GB utilizing 512 Mb or 1 Gb technology
NOTE
System resources (such as PCI and PCI Express) require physical memory address locations that
reduce available memory addresses above 3 GB. This may result in less than 4 GB of memory
being available to the operating system and applications.
Related Links:
Go to the following links or pages for more information about:
•
•
•
The latest list of tested memory, http://support.intel.com/support/motherboards/desktop/
SDRAM specifications, http://www.intel.com/technology/memory/
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Intel® 945P Express Chipset
The Intel 945P Express Chipset consists of the following devices:
•
•
•
Intel 82945P Memory Controller Hub (MCH) with Digital Media Interface
Intel 82801GR I/O Controller Hub (ICH7R) supporting Intel Matrix Storage Technology
Firmware Hub (FWH)
Related Link:
Go to the following link for more information about the Intel 945P Express Chipset:
Graphics Subsystem
Desktop board D945PVS includes the following:
•
•
Intel 945P Express Chipset
PCI Express x16 connector for graphics expansion
Audio Subsystem
Desktop board D945PVS includes a flexible 8-channel audio subsystem based on an Intel High
Definition Audio codec:
The audio subsystem features:
•
•
•
•
•
Intel 82801GR I/O Controller Hub (ICH7R)
SigmaTel STAC9223 audio codec
Impedance sensing capability for jack re-tasking
S/N (signal-to-noise) ratio: 95 dB
Microphone input that supports:
⎯ Stereo microphone
⎯ Microphone boost
The subsystem includes the following connectors:
•
Front panel audio connector, including functionality for:
⎯ Line out
⎯ Mic in
Related Links:
Go to the following link or pages for more information about:
•
•
Audio drivers and utilities http://support.intel.com/support/motherboards/desktop/
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Input/Output (I/O) Controller
The super I/O controller features the following:
•
•
•
Low pin count (LPC) interface
One serial port
One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port
(EPP) support
•
•
•
•
•
Serial IRQ interface compatible with serialized IRQ support for PCI systems
PS/2-style mouse and keyboard interfaces
Interface for one 1.2 MB or 1.44 MB diskette drive
Intelligent power management, including a programmable wake up event interface
PCI power management support
LAN Subsystem
The LAN, with the Intel 82801GR (ICH7R), provides a Fast PCI LAN subsystem. The LAN
subsystem provides the following functions:
•
•
•
Support for Intel 82573V or Intel 82574V 10/100/1000 Gigabit Ethernet LAN
Support for RJ-45 connector with status indicator LEDs
Configurable EEPROM that contains the MAC address
LAN Subsystem Software
For LAN software and drivers, refer to the D945PVS link on Intel’s World Wide Web site at:
RJ-45 LAN Connector LEDs
Two LEDs are built into the RJ-45 LAN port located on the back panel (see Figure 2).
OM17386
Figure 2. LAN Port LED Locations
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
board is powered up and the 10/100/1000 Gigabit Ethernet LAN subsystem is operating.
Table 4.
RJ-45 10/100/1000 Gigabit Ethernet LAN Connector LEDs
LED
LED Color
LED State
Off
Indicates
Left
Green
LAN link is not established
LAN link is established
LAN activity is occurring
10 Mb/s data rate
On
Blinking
Off
Right
N/A
Green
Yellow
On
100 Mb/s data rate
1000 Mb/s data rate
On
Hi-Speed USB 2.0 Support
NOTE
Computer systems that have an unshielded cable attached to a USB port might not meet FCC
Class B requirements, even if no device or a low-speed USB device is attached to the cable.
Use a shielded cable that meets the requirements for a full-speed USB device.
The desktop board supports up to eight USB 2.0 ports via ICH7R; four ports routed to the back
panel and four routed to two internal USB 2.0 headers. USB 2.0 ports are backward compatible
with USB 1.1 devices. USB 1.1 devices will function normally at USB 1.1 speeds.
USB 2.0 support requires both an operating system and drivers that fully support USB 2.0 transfer
rates. Disabling Hi-Speed USB in the BIOS reverts all USB 2.0 ports to USB 1.1 operation. This
may be required to accommodate operating systems that do not support USB 2.0.
Enhanced IDE Interface
The ICH7R’s IDE interface handles the exchange of information between the processor and
peripheral devices like hard disks, CD-ROM drives, and Iomega Zip* drives inside the computer.
The interface supports:
•
•
•
•
•
Up to two IDE devices (such as hard drives)
ATAPI-style devices (such as CD-ROM drives)
Older PIO Mode devices
Ultra DMA-33 and ATA-66/100 protocols
Laser Servo (LS-120) drives
Serial ATA
The desktop board supports four Serial ATA channels via ICH7R, connecting one device per
channel. Desktop boards with ICH7R support Intel Matrix Storage Technology (NCQ, Hot Plug,
RAID 0, 1, 10, 5, and Matrix RAID).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Expandability
The desktop board supports the following:
•
•
•
One PCI Express x16 add-in card
Two PCI Express x1 add-in card
Four PCI add-in cards
Related Links:
BIOS
The BIOS provides the Power-On Self-Test (POST), the BIOS Setup program, the PCI/PCI
Express and IDE auto-configuration utilities, and the video BIOS. The BIOS is stored in the
Firmware Hub.
The BIOS can be entered by pressing the <F2> key at startup. The BIOS can be updated by
Serial ATA and IDE Auto Configuration
If you install a Serial ATA or IDE device (such as a hard drive) in your computer, the auto-
configuration utility in the BIOS automatically detects and configures the device for your computer.
You do not need to run the BIOS Setup program after installing a Serial ATA or IDE device. You
can override the auto-configuration options by specifying manual configuration in the BIOS Setup
program.
PCI and PCI Express Auto Configuration
If you install a PCI/PCI Express add-in card in your computer, the PCI/PCI Express auto-
configuration utility in the BIOS automatically detects and configures the resources (IRQs, DMA
channels, and I/O space) for that add-in card. You do not need to run the BIOS Setup program after
you install a PCI/PCI Express add-in card.
Security Passwords
The BIOS includes security features that restrict whether the BIOS Setup program can be accessed
and who can boot the computer. A supervisor password and a user password can be set for the
BIOS Setup and for booting the computer, with the following restrictions:
•
•
•
The supervisor password gives unrestricted access to view and change all Setup options. If
only the supervisor password is set, pressing <Enter> at the password prompt of Setup gives the
user restricted access to Setup.
If both the supervisor and user passwords are set, you must enter either the supervisor password
or the user password to access Setup. Setup options are then available for viewing and
changing depending on whether the supervisor or user password was entered.
Setting a user password restricts who can boot the computer. The password prompt is
displayed before the computer is booted. If only the supervisor password is set, the computer
boots without asking for a password. If both passwords are set, you can enter either password
to boot the computer.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Related Links:
•
Chassis Intrusion
The board supports a chassis security feature that detects if the chassis cover has been removed.
The security feature uses a mechanical switch on the chassis that can be connected to the chassis
intrusion header.
Power Management Features
Power management is implemented at several levels, including:
•
•
Advanced Configuration and Power Interface (ACPI)
Hardware support:
⎯ Power connectors
⎯ Fan connectors
⎯ Suspend to RAM (Instantly Available PC technology)
⎯ Wake from USB
⎯ Wake from PS/2 keyboard/mouse
⎯ PME# wakeup support
ACPI
ACPI gives the operating system direct control over the power management and Plug and Play
functions of a computer. The use of ACPI with the desktop board requires an operating system that
provides full ACPI support.
Power Connectors
power connectors.
Fan Connectors
The desktop board has a 4-pin processor fan header and two 3-pin chassis fan headers. See
Fan Speed Control (Intel® Precision Cooling Technology)
Intel Precision Cooling Technology automatically adjusts the processor fan speed based on the
processor thermal diode temperature and adjusts the chassis fan speeds depending on the system
temperature. System fan noise may be reduced by operating controlled chassis and processor fans
at the minimum necessary speeds.
The processor and chassis fan speed control features can be disabled independently through the
desktop board BIOS. Disabling the processor fan speed control will result in the fan operating at
full speed if it is not a self controlled fan. It is recommended that processor fan speed control
remain enabled (default BIOS setting) when using the processor fan heat-sink included with Intel®
boxed processors. Disabling the chassis fan speed control results in chassis fans always operating
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
at full speed. The chassis fan speed control feature should be disabled if a self-controlled chassis
fan is attached to any controlled chassis fan header.
The overall system noise reduction will vary based on system configuration and environment.
Suspend to RAM (Instantly Available PC Technology)
CAUTIONS
For Instantly Available PC technology, the 5 V standby line for the power supply must be capable
of delivering adequate +5 V standby current. Failure to provide adequate standby current when
using this feature can damage the power supply and/or affect ACPI S3 sleep state functionality.
Power supplies used with this desktop board must be able to provide enough standby current to
support the standard Instantly Available (ACPI S3 sleep state) configuration. If the standby
current necessary to support multiple wake events from the PCI and/or USB buses exceeds power
supply capacity, the desktop board may lose register settings stored in memory.
Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-to-RAM) sleep
state. While in the S3 sleep state, the computer will appear to be off. When signaled by a wake-up
device or event, the system quickly returns to its last known awake state.
to the system. This includes the memory modules and PCI bus connectors, even when the
computer appears to be off.
If the system has a dual-colored power LED on the front panel, the sleep state is indicated by the
LED turning amber.
OM17670
Figure 3. Location of Standby Power Indicator
Related Links:
For more information on standby current requirements for the desktop board, refer to the Technical
Product Specification by going to the following link, finding the product, and selecting Product
Documentation from the left-hand menu:
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Desktop Board Features
Wake from USB
NOTE
Wake from USB requires the use of a USB peripheral that supports wake from USB.
USB bus activity wakes the computer from an ACPI S1 or S3 state.
Wake from PS/2 Keyboard/Mouse
PS/2 keyboard/mouse activity wakes the computer from an ACPI S1 or S3 state.
PME# Wakeup Support
When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3,
or S5 state.
Speaker
A speaker is mounted on the desktop board. The speaker provides audible error code (beep code)
information during the Power-On Self-Test (POST).
Battery
A battery on the desktop board keeps the values in CMOS RAM and the clock current when the
Real-Time Clock
The desktop board has a time-of-day clock and 100-year calendar. The battery on the desktop
board keeps the clock current when the computer is turned off.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Installing and Replacing Desktop
Board Components
This chapter tells you how to:
•
•
•
•
•
•
•
•
•
•
•
•
Install the I/O shield
Install and remove the desktop board
Install and remove a processor and memory
Install and remove a PCI Express x16 card
Connect the IDE and Serial ATA cables
Connect internal headers
Connect fans and power cables
Connect PCI bus add-in cards
Locate other connectors
Set the BIOS configuration jumper
Clear passwords
Replace the battery
Before You Begin
CAUTIONS
The procedures in this chapter assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance required for using and
modifying electronic equipment.
Disconnect the computer from its power source and from any telecommunications links, networks,
or modems before performing any of the procedures described in this chapter. Failure to
disconnect power, telecommunications links, networks, or modems before you open the computer or
perform any procedures can result in personal injury or equipment damage. Some circuitry on the
board can continue to operate even though the front panel power button is off.
NOTE
Refer to Appendix B for regulatory requirements.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Follow these guidelines before you begin:
•
•
Always follow the steps in each procedure in the correct order.
Set up a log to record information about your computer, such as model, serial numbers,
installed options, and configuration information.
•
Electrostatic discharge (ESD) can damage components. Perform the procedures described in
this chapter only at an ESD workstation using an antistatic wrist strap and a conductive foam
pad. If such a station is not available, you can provide some ESD protection by wearing an
antistatic wrist strap and attaching it to a metal part of the computer chassis.
Installation Precautions
When you install and test the Intel desktop board, observe all warnings and cautions in the
installation instructions.
To avoid injury, be careful of:
•
•
•
•
•
Sharp pins on connectors
Sharp pins on printed circuit assemblies
Rough edges and sharp corners on the chassis
Hot components (like processors, voltage regulators, and heat sinks)
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.
Installation Instructions
NOTE
Follow these guidelines to meet safety and regulatory requirements when installing this board.
Read and adhere to all of these instructions and the instructions supplied with the chassis and
associated modules. If the instructions for the chassis are inconsistent with these instructions or the
instructions for associated modules, contact the supplier’s technical support to find out how you can
ensure that your computer meets safety and regulatory requirements. If you do not follow these
instructions and the instructions provided by chassis and module suppliers, you increase safety risk
and the possibility of noncompliance with regional laws and regulations.
Ensure Electromagnetic Compatibility (EMC) Compliance
Before computer integration, make sure that the power supply and other modules or peripherals, as
applicable, have passed Class B EMC testing and are marked accordingly.
Pay close attention to the following when reading the installation instructions for the host chassis,
power supply, and other modules:
•
•
•
•
Product certifications or lack of certifications
External I/O cable shielding and filtering
Mounting, grounding, and bonding requirements
Keying connectors when mating the wrong connectors could be hazardous
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
If the power supply and other modules or peripherals, as applicable, are not Class B EMC
compliant before integration, then EMC testing may be required on a representative sample of the
newly completed computer.
Chassis and Component Certifications
Ensure that the chassis and certain components; such as the power supply, peripheral drives,
wiring, and cables; are components certified for the country or market where used. Agency
certification marks on the product are proof of certification. Typical product certifications include:
•
In Europe
The CE marking signifies compliance with all applicable European requirements. If the
chassis and other components are not properly CE marked, a supplier’s Declaration of
Conformity statement to the European EMC directive and Low Voltage directive (as
applicable), should be obtained. Additionally, other directives, such as the Radio and
Telecommunications Terminal Equipment (R&TTE) directive may also apply depending on
product features.
•
•
In the United States
A certification mark by a Nationally Recognized Testing Laboratory (NRTL) such as UL,
CSA, or ETL signifies compliance with safety requirements. Wiring and cables must also be
UL listed or recognized and suitable for the intended use. The FCC Class B logo for home or
office use signifies compliance with electromagnetic interference (EMI) requirements.
In Canada
A nationally recognized certification mark such as CSA or cUL signifies compliance with
safety requirements. The Industry Canada statement at the front of this product guide
demonstrates compliance with Canadian EMC regulations.
Prevent Power Supply Overload
Do not overload the power supply output. To avoid overloading the power supply, make sure that
the calculated total current loads of all the modules within the computer is less than the output
current rating of each of the power supplies output circuits.
Place Battery Marking
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled
where possible. Disposal of used batteries must be in accordance with local environmental
regulations.
There is insufficient space on this desktop board to provide instructions for replacing and disposing
of the Lithium ion coin cell battery. For system safety certification, the above statement or
equivalent statement is required to be permanently and legibly marked on the chassis near the
battery.
Related Links:
For information about replacing the battery, go to page 49.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Use Only for Intended Applications
All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in
personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar
locations. The suitability of this product for other PC or embedded non-PC applications or other
environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported
without further evaluation by Intel.
Related Links:
For information about regulatory compliance, go to Appendix B on page 63.
Installing the I/O Shield
The desktop board comes with an I/O shield. When installed in the chassis, the shield blocks radio
frequency transmissions, protects internal components from dust and foreign objects, and promotes
correct airflow within the chassis.
Install the I/O shield before installing the desktop board in the chassis. Place the shield inside the
chassis as shown in Figure 4. Press the shield into place so that it fits tightly and securely. If the
shield doesn’t fit, obtain a properly-sized shield from the chassis supplier.
OM17731
Figure 4. Installing the I/O Shield
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Installing and Removing the Desktop Board
CAUTION
Only qualified technical personnel should do this procedure. Disconnect the computer from its
power source before performing the procedures described here. Failure to disconnect the power
before you open the computer can result in personal injury or equipment damage.
Refer to your chassis manual for instructions on installing and removing the desktop board.
Figure 5 shows the location of the 11 mounting screw holes for desktop board D945PVS.
OM17671
Figure 5. Desktop Board D945PVS Mounting Screw Hole Locations
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing and Removing a Processor
Instructions on how to install the processor to the desktop board are given below.
Installing a Processor
CAUTION
Before installing or removing the processor, make sure the AC power has been removed by
unplugging the power cord from the computer; the standby power LED should not be lit (see
To install a processor, follow these instructions:
A and B).
A
B
OM17210
Figure 6. Lift Socket Lever
C
D
D
OM17211
Figure 7. Lift the Load Plate and Don’t Touch the Socket Contacts
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
discard the protective socket cover. Always replace the socket cover if the processor is
removed from the socket.
E
OM17228
Figure 8. Remove the Protective Socket Cover
5. Remove the processor from the protective processor cover. Hold the processor only at the
protective processor cover. Always replace the processor back to the package if the processor
is removed from the socket.
OM17213
Figure 9. Remove the Processor from the Protective Processor Cover/Do Not Touch
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Installing the Processor Fan Heat Sink
Desktop board D945PVS has an integrated processor fan heat sink retention mechanism (RM). For
instructions on how to attach the processor fan heat sink to the integrated processor fan heat sink
RM, refer to the boxed processor manual or the Intel World Wide Web site at:
Connecting the Processor Fan Heat Sink Cable
OM17672
Figure 12. Connecting the Processor Fan Heat Sink Cable to the Processor Fan Connector
Removing the Processor
For instructions on how to remove the processor fan heat sink and processor, refer to the processor
installation manual or the Intel World Wide Web site at:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing and Removing Memory
NOTE
To be fully compliant with all applicable Intel SDRAM memory specifications, the board requires
DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC
Serial Presence Detect Specification at:
The desktop board has four 240-pin DDR2 DIMM sockets arranged as DIMM 0 (blue) and
DIMM 1 (black) in both Channel A and Channel B.
Guidelines for Dual Channel Memory Configuration
Before installing DIMMs, read and follow these guidelines for dual channel configuration.
Two or Four DIMMs
Install a matched pair of DIMMs equal in speed and size in DIMM 0 (blue) of both channels
Channel A
1 GB, 533 MHz
1 GB, 533 MHz
DIMM 0
DIMM 1
Channel B
DIMM 0
DIMM 1
Figure 13. Dual Configuration Example 1
If additional memory is to be used, install another matched pair of DIMMs in DIMM 1 (black) in
Channel A
DIMM 0
256 MB, 533 MHz
512 MB, 533 MHz
DIMM 1
Channel B
DIMM 0
256 MB, 533 MHz
512 MB, 533 MHz
DIMM 1
Figure 14. Dual Configuration Example 2
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Three DIMMs
Install a matched pair of DIMMs equal in speed and size in DIMM 0 (blue) and DIMM 1 (black) of
channel A. Install a DIMM equal in speed and total size of the DIMMs installed in channel A in
Channel A
DIMM 0
256 MB, 533 MHz
256 MB, 533 MHz
DIMM 1
Channel B
DIMM 0
512 MB, 533 MHz
DIMM 1
Figure 15. Dual Configuration Example 3
NOTE
All other memory configurations will result in single channel memory operation.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing DIMMs
NOTE
Install memory in the DIMM sockets prior to installing a PCI Express video card to avoid
interference with the memory retention mechanism.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
01
OM17673
Figure 16. Installing a DIMM
4. Remove the PCI Express video card if it interferes with the DIMM retaining clips from being
easily opened and closed.
5. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
6. Holding the DIMM by the edges, remove it from its anti-static package.
7. Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM
8. Insert the bottom edge of the DIMM into the socket.
9. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips
snap into place. Make sure the clips are firmly in place.
10. Reinstall the PCI Express card if it was removed prior to installing the DIMMs.
11. Replace the computer’s cover and reconnect the AC power cord.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Removing DIMMs
To remove a DIMM, follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer.
3. Remove the AC power cord from the computer.
4. Remove the computer’s cover.
5. Remove the PCI Express card if it interferes with the DIMM clips from being easily opened
and closed.
6. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops out of
the socket.
7. Hold the DIMM by the edges, lift it away from the socket, and store it in an anti-static package.
8. Reinstall the PCI Express card if you removed it before taking out the DIMM.
9. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets.
10. Replace the computer’s cover and reconnect the AC power cord.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing and Removing a PCI Express x16 Card
CAUTION
When installing any PCI Express x16 card on the desktop board, ensure that it is fully seated in the
PCI Express x16 connector before you power on the system. If the card is not fully seated in the
PCI Express connector, an electrical short may result across the PCI Express connector pins.
Depending on the over-current protection of the power supply, certain board components and/or
traces may be damaged.
Installing a PCI Express x16 Card
2. Place the card in the PCI Express x16 connector and press down on the card until it is
completely seated in the connector and the card retention notch snaps into place around the
RM pin (Figure 17, A).
B
A
OM17683
Figure 17. Inserting a PCI Express x16 Card
Removing the PCI Express x16 Card
Follow these instructions to remove the PCI Express x16 card from the RM:
2. Remove the screw that secures the card’s metal bracket to the chassis back panel.
3. Push back on the RM lever until the retention pin completely clears the notch in the card.
4. Pull the card straight up.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting the IDE Cable
The IDE cable can connect two drives to the desktop board. The cable supports the ATA-66/100
NOTES
ATA-66/100 compatible cables are backward compatible with drives using slower IDE transfer
protocols. If an ATA-66/100 disk drive and a disk drive using any other IDE transfer protocol are
attached to the same cable, the maximum transfer rate between the drives may be reduced to that of
the slowest drive.
Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device. For
example, do not connect an ATA hard drive as a slave to an ATAPI CD-ROM drive.
For correct function of the cable:
•
•
•
Attach the cable end with the two closely spaced connectors (gray and black) to the drives
A
B
OM17674
Figure 18. Connecting the IDE Cable
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Connecting the Serial ATA (SATA) Cable
The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the
desktop board. For correct cable function:
A
B
OM17675
Figure 19. Connecting the Serial ATA Cable
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting Internal Headers
1
3
2
4
6
GND
Port1L
Port1R
Presence#
Sense1_Ret
F
5
7
9
Port2R
Sense_Send
Port2L
Key (no pin)
Sense2_Ret
10
1394a
1
3
5
7
2
4
TPA1-
TPA1+
Ground
TPA2-
Ground
TPA2+
+12 V
E
6
8
+12 V
Key
10
Ground
(no pin)
USB A
USB B
Power (+5V)
1
3
5
2
Power (+5V)
D-
4
6
D-
D
D+
D+
Ground
8
7
Ground
10
Key (no pin)
A
N/C
1 2
9
No Connection
Reset
8
7
5
On/Off
6
C
B
4
3
1
HD LED
Power LED
2
3
1
OM17676
Item
A
Description
Chassis intrusion
Alternate power LED
Front panel
B
C
D
USB 2.0 (two)
E
IEEE-1394a (two)
Front panel audio
F
Figure 20. Internal Headers
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing a Front Panel Audio Solution for Intel® High Definition Audio
the pin assignments for the front panel audio header.
Table 5.
Front Panel Audio Header Signal Names for Intel High Definition Audio
Pin
1
Signal Name
PORT 1L
Pin
2
Signal Name
GND
3
PORT 1R
4
PRESENCE#
SENSE1_RETURN
KEY (no pin)
SENSE2_RETURN
5
PORT 2R
6
7
SENSE_SEND
PORT 2L
8
9
10
To install the cable that connects the front panel audio solution to the front panel audio header,
follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Install a correctly keyed and shielded front panel audio cable.
NOTE: some chassis still use a front panel audio solution based on the AC ’97 audio
specification. Refer to Table 8 below to connect an AC ’97 front panel solution to the front
panel audio header on the board. The front panel audio jacks will need to be manually
configured for microphone or line out functionality in the Intel Audio Studio application.
Table 6.
AC ’97 Audio Header Signal Names
Pin
1
Signal Name
MIC
Pin
2
Signal Name
AUD_GND
AUD_GND
FP_RETURN_R
KEY
3
MIC_BIAS
FP_OUT_R
AUD_5V
4
5
6
7
8
9
FP_OUT_L
10
FP_RETURN_L
5. Connect the audio cable to the front panel audio solution.
6. Replace the cover.
To restore back panel audio, follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Remove the front panel audio cable.
5. Replace the cover.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting USB 2.0 Headers
Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on
shows the pin assignments for the USB 2.0 headers.
Table 7.
USB 2.0 Header Signal Names
USB Port A
USB Port B
Signal Name
Power
D-
Pin
1
Signal Name
Power
D-
Pin
2
3
4
5
D+
6
D+
7
Ground
Key
8
Ground
No connect
9
10
Note: USB ports may be assigned as needed.
Connecting IEEE 1394a Headers
Before connecting the IEEE 1394a headers, observe the precautions in "Before You Begin" on
Table 8 shows the pin assignments for the headers.
Table 8.
IEEE 1394a Header Signal Names
Pin
1
Signal Name
TPA1+
Pin
2
Signal Name
TPA1-
3
5
Ground
TPA2+
4
6
Ground
TPA2-
7
+12 V
8
+12 V
9
Key (no pin)
10
Ground
Connecting the Front Panel Header
Before connecting the front panel header, observe the precautions in "Before You Begin" on
Table 9 shows the pin assignments for the front panel header.
Table 9.
Front Panel Header Signal Names
In/Out Description
Pin Signal
Pin Signal
In/Out Description
Power LED (Green)
HDR_BLNK_GRN Out Front panel green
Hard Drive Activity LED (Orange)
1
3
HD_PWR
Out
Hard disk LED pull-
2
4
up (330 Ω) to +5 V
LED
HDA#
Out
Hard disk active LED
HDR_BLNK_YEL Out
Front panel yellow
LED
Reset Switch (Purple)
On/Off Switch (Red)
5
7
Ground
Ground
6
8
SWITCH_ON#
Ground
In
Power switch
Ground
FP_RESET# In
N/C
Reset switch
9
Not connected
10 No pin
No pin
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Installing the Rear Panel USB 2.0 and IEEE 1394a Adapters
2. Attach the cable end with the black connector to the USB 2.0 (black) header on the desktop
board.
3. Attach the cable end with the blue connector to the IEEE 1394a header (blue) on the desktop
board.
4. Secure the cable’s metal bracket to the chassis back panel with a screw.
OM17684
Figure 21. Connecting the Rear Panel USB 2.0 and IEEE 1394a Adapters
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Installing the Front Panel USB/IEEE 1394a/Audio Solution
To install the front panel USB/IEEE 1394a/audio solution cables to the headers, follow these steps
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Locate the front panel audio header (yellow), USB 2.0 header (black), and IEEE 1394a header
(blue) on the desktop board.
5. Install a correctly keyed and shielded cable.
6. Connect the cables to their respective headers on the desktop board.
7. Replace the cover.
OM17735
Figure 22. Connecting the Front Panel USB/IEEE 1394a/Audio Cables
To restore back panel audio, follow these steps:
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Remove the front panel USB/IEEE 1394a/audio solution cables.
5. Replace the cover.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Connecting Fan and Power Cables
Connecting Fan Cables
4-pin processor fan header on the board. Connect chassis fan cables to the 3-pin fan headers.
OR
3
1
2
3
1
2
4
3
2
1
4
3
2
1
A
B
A
B
OM17677
Figure 23. Location of Fan Headers
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Connecting Power Supply Cables
CAUTION
Failure to use the appropriate power supply and/or not connecting the 12 V (2x2) power connector
to the desktop board may result in damage to the board or the system may not function properly.
supply connectors.
2
1
OM17678
Figure 24. Connecting 2x12 Power Supply Cables
2. Connect the main power supply cable to the 2x12 connector.
3. Connect the 12 V processor core voltage power supply cable to the 2x2 connector.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Other Connectors
Figure 25 shows the location of the PCI add-in card, PCI Express 1x, and diskette drive connectors.
A
B
F
E
C
D
G
OM17679
Item
A
Description
PCI bus add-in card connector 4
PCI bus add-in card connector 3
PCI Express x1 connector 2
PCI Express x1 connector 1
B
C
D
E
PCI bus add-in card connector 2 (SMBus routed)
PCI bus add-in card connector 1
Diskette drive connector
F
G
Figure 25. Location of Other Connectors on Desktop Board D945PVS
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Setting the BIOS Configuration Jumper
NOTE
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 26 shows the location of the desktop board’s BIOS configuration jumper.
3
2
1
OM17680
Figure 26. Location of the BIOS Configuration Jumper
shows the jumper settings for the Setup program modes.
Table 10. Jumper Settings for the BIOS Setup Program Modes
Jumper Setting
Mode
Description
Normal (default) (1-2)
The BIOS uses the current configuration and passwords for
booting.
3
1
Configure (2-3)
After the Power-On Self-Test (POST) runs, the BIOS
displays the Maintenance Menu. Use this menu to clear
passwords.
3
1
Recovery (None)
The BIOS recovers data from a recovery diskette in the
event of a failed BIOS update.
3
1
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Clearing Passwords
This procedure assumes that the board is installed in the computer and the configuration jumper
block is set to normal mode.
2. Turn off all peripheral devices connected to the computer. Turn off the computer. Disconnect
the computer’s power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
5. Place the jumper on pins 2-3 as shown below.
3
1
6. Replace the cover, plug in the computer, turn on the computer, and allow it to boot.
7. The computer starts the Setup program. Setup displays the Maintenance menu.
8. Use the arrow keys to select Clear Passwords. Press <Enter> and Setup displays a pop-up
screen requesting that you confirm clearing the password. Select Yes and press <Enter>.
Setup displays the maintenance menu again.
9. Press <F10> to save the current values and exit Setup.
10. Turn off the computer. Disconnect the computer’s power cord from the AC power source.
11. Remove the computer cover.
12. To restore normal operation, place the jumper on pins 1-2 as shown below.
3
1
13. Replace the cover, plug in the computer, and turn on the computer.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
Replacing the Battery
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer
is not plugged into a wall socket, the battery has an estimated life of three years. When the
computer is plugged in, the standby current from the power supply extends the life of the battery.
The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS
RAM (for example, the date and time) might not be accurate. Replace the battery with an
CAUTION
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled
where possible. Disposal of used batteries must be in accordance with local environmental
regulations.
PRÉCAUTION
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées
doivent être recyclées dans la mesure du possible. La mise au rebut des piles usagées doit
respecter les réglementations locales en vigueur en matière de protection de l'environnement.
FORHOLDSREGEL
Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier bør om muligt
genbruges. Bortskaffelse af brugte batterier bør foregå i overensstemmelse med gældende
miljølovgivning.
OBS!
Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier bør kastes i
henhold til gjeldende miljølovgivning.
VIKTIGT!
Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras enligt de
lokala miljövårdsbestämmelserna.
VARO
Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on mahdollista.
Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti.
VORSICHT
Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch
denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden.
Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
AVVERTIMENTO
Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo
pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate,
seguire le istruzioni del produttore.
PRECAUCIÓN
Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas
iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de
las pilas usadas, siga igualmente las instrucciones del fabricante.
WAARSCHUWING
Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij.
Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het weggooien van gebruikte
batterijen aan de plaatselijke milieuwetgeving.
ATENÇÃO
Haverá risco de explosão se a bateria for substituída por um tipo de bateria incorreto. As baterias
devem ser recicladas nos locais apropriados. A eliminação de baterias usadas deve ser feita de
acordo com as regulamentações ambientais da região.
AŚCIAROŽZNAŚĆ
Існуе рызыка выбуху, калі заменены акумулятар неправільнага тыпу. Акумулятары павінны,
па магчымасці, перепрацоўвацца. Пазбаўляцца ад старых акумулятараў патрэбна згодна з
мясцовым заканадаўствам па экалогіі.
UPOZORNÌNÍ
V případě výměny baterie za nesprávný druh může dojít k výbuchu. Je-li to možné, baterie by měly
být recyklovány. Baterie je třeba zlikvidovat v souladu s místními předpisy o životním prostředí.
Προσοχή
Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία λανθασμένου
τύπου. Οι μπαταρίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο είναι δυνατό. Η απόρριψη των
χρησιμοποιημένων μπαταριών πρέπει να γίνεται σύμφωνα με τους κατά τόπο περιβαλλοντικούς
κανονισμούς.
VIGYAZAT
Ha a telepet nem a megfelelő típusú telepre cseréli, az felrobbanhat. A telepeket lehetőség szerint
újra kell hasznosítani. A használt telepeket a helyi környezetvédelmi előírásoknak megfelelően kell
kiselejtezni.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
AWAS
Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya
dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar
tempatan.
OSTRZEŻENIE
Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte
baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony
środowiska.
PRECAUŢIE
Risc de explozie, dacă bateria este înlocuită cu un tip de baterie necorespunzător. Bateriile trebuie
reciclate, dacă este posibil. Depozitarea bateriilor uzate trebuie să respecte reglementările locale
privind protecţia mediului.
ВНИМАНИЕ
При использовании батареи несоответствующего типа существует риск ее взрыва.
Батареи должны быть утилизированы по возможности. Утилизация батарей должна
проводится по правилам, соответствующим местным требованиям.
UPOZORNENIE
Ak batériu vymeníte za nesprávny typ, hrozí nebezpečenstvo jej výbuchu.
Batérie by sa mali podľa možnosti vždy recyklovať. Likvidácia použitých batérií sa musí vykonávať
v súlade s miestnymi predpismi na ochranu životného prostredia.
POZOR
Zamenjava baterije z baterijo drugačnega tipa lahko povzroči eksplozijo.
Če je mogoče, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi
okoljevarstvenimi predpisi.
การระวงั
ระวังการระเบิดทเี่ กดิ จากเปลยี่ นแบตเตอรี่ผดิ ประเภท หากเปนไปได ควรนําแบตเตอรี่ไปรีไซเคิล
การทิ้งแบตเตอรี่ใชแลวตอ งเปนไปตามกฎขอ บังคบั ดานสิ่งแวดลอมของทองถิ่น.
UYARI
Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri
dönüştürülmelidir. Kullanılmış piller, yerel çevre yasalarına uygun olarak atılmalıdır.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
OСТОРОГА
Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху.
Якщо можливо, використані батареї слід утилізувати. Утилізація використаних батарей
має бути виконана згідно місцевих норм, що регулюють охорону довкілля.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Replacing Desktop Board Components
To replace the battery, follow these steps:
2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power
cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
5. With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note the
orientation of the “+” and “-” on the battery.
6. Install the new battery in the connector, orienting the “+” and “-” correctly.
7. Replace the computer cover.
OM17681
Figure 27. Removing the Battery
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
54
Download from Www.Somanuals.com. All Manuals Search And Download.
3 BIOS
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins.
OM17050
Figure 28. F2 Key
This chapter tells you how to update the BIOS by either using the Intel Express BIOS Update utility
or the Iflash Memory Update utility, and how to recover the BIOS if an update fails.
Updating the BIOS with the Intel® Express BIOS
Update Utility
With the Intel Express BIOS Update utility you can update the system BIOS while in the Windows
environment. The BIOS file is included in an automated update utility that combines the
functionality of the Intel® Flash Memory Update Utility and the ease-of use of Windows-based
installation wizards.
To update the BIOS with the Intel Express BIOS Update utility:
1. Go to the Intel World Wide Web site:
2. Navigate to the D945PVS page, click “[view] Latest BIOS updates,” and select the Express
BIOS Update utility file.
3. Download the file to your hard drive. (You can also save this file to a diskette. This is useful if
you are updating the BIOS for multiple identical systems.)
4. Close all other applications. This step is required. Your system will be rebooted at the last
Express BIOS Update window.
5. Double-click the executable file from the location on your hard drive where it was saved. This
runs the update program.
6. Follow the instructions provided in the dialog boxes to complete the BIOS update.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Updating the BIOS with the Iflash Memory Update
Utility
With the Iflash BIOS update utility you can update the system BIOS from a floppy disk or other
bootable media. The utility available from the Web provides a simple method for creating a
bootable flash memory update floppy that will automatically update your BIOS.
Obtaining the BIOS Update File
You can update to a new version of the BIOS by using the BIOS update file. The BIOS update file
is a compressed self-extracting archive that contains all the files you need to update the BIOS. The
BIOS update file contains:
•
•
•
New BIOS files
BIOS recovery files
Intel Flash Memory Update Utility
You can obtain the BIOS update file through your computer supplier or by navigating to the
Desktop Board D945PVS page on the Intel World Wide Web site at:
Navigate to the D945PVS page, click “[view] Latest BIOS updates,” and select the Iflash BIOS
Update utility file.
NOTE
Review the instructions distributed with the update utility before attempting a BIOS update.
The Iflash Memory Update utility allows you to:
•
•
Update the BIOS in flash memory
Update the language section of the BIOS
Updating the BIOS
CAUTION
The AUTOEXEC.BAT file provided with the update files updates the BIOS. Do not interrupt the
process or the system may not function.
1. Boot the computer with the BIOS update diskette in drive A. During system boot, the
AUTOEXEC.BAT file provided with the update files will automatically run the BIOS update
process.
2. When the update process is complete, the monitor will display a message telling you to remove
the diskette and to reboot the system.
3. As the computer boots, check the BIOS identifier (version number) to make sure the update
was successful. If a logo appears, press <Esc> to view the POST messages.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS
Recovering the BIOS
It is unlikely that anything will interrupt the BIOS update; however, if an interruption occurs, the
BIOS could be damaged. The following steps explain how to recover the BIOS if an update fails.
information on Setup modes.
NOTE
Because of the small amount of code available in the boot block area, there is no video support.
You will not see anything on the screen during this procedure. Monitor the procedure by listening
to the speaker and looking at the diskette drive LED.
1. Turn off the computer, disconnect the computer’s power cord, and disconnect all external
peripherals.
3. Remove the jumper from all pins as shown below to set recovery mode for Setup.
3
1
4. Insert the bootable BIOS update diskette into diskette drive A.
5. Replace the computer cover, connect the power cord, turn on the computer, and allow it to
boot. The recovery process will take a few minutes.
6. Listen to the speaker:
•
Upon applying power, drive A will begin to show activity. In about a minute, two beeps
are heard and drive A activity ceases (temporarily) indicating the successful recovery of the
BIOS core. Drive A activity will begin again followed by two more beeps indicating the
successful recovery of the boot block. This sequence of events indicates a successful BIOS
recovery.
•
A series of continuous beeps indicates a failed BIOS recovery.
7. If recovery fails, return to step 1 and repeat the recovery process.
8. If recovery is successful, turn off the computer, and disconnect its power cord.
9. Remove the computer cover and continue with the following steps.
10. On the jumper block, reinstall the jumper back on pins 1-2 as shown below to set normal mode
for Setup.
3
1
11. Leave the update diskette in drive A, replace the computer cover, and connect the computer’s
power cord.
12. Turn on the computer and continue with the BIOS update.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
58
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Configuring for RAID (Intel® Matrix
Storage Technology)
Requires Microsoft Windows* XP or 2000 and SATA Hard Drive(s)
Configuring the BIOS for Intel Matrix Storage Technology
1. Assemble your system and attach two or more SATA hard drives.
2. Enter system BIOS Setup by pressing the <F2> key after the Power-On-Self-Test (POST)
memory tests begin.
3. Go to Advanced ꢀDrive Configuration ꢀConfigure SATA as; ensure RAID is selected.
4. Then save your settings by pressing <F10>.
Creating Your RAID Set
1. Upon re-boot, you will see the following Intel Matrix Storage Manager option ROM status
message on the screen: Press <Ctrl-I> to enter the RAID Configuration
Utility. Press <Ctrl-I> and enter the RAID Configuration Utility.
2. In the Intel Matrix Storage Manager option ROM Main Menu, select option #1: Create RAID
Volume. Enter a volume name and press <Enter>.
NOTE: The RAID Volume name must be in English alphanumeric ASCII characters.
3. Use the arrow keys to select RAID 0 or RAID 1 (if only two SATA drives are available),
RAID 5 and RAID 10 (these options will only appear if three or four SATA drives are installed
respectively). Press <Enter> once you have selected the RAID LEVEL.
4. Select the drives to be used in the RAID array (only if there are more than two drives available)
and press <Enter>.
5. Select the strip size, if necessary, and press <Enter>.
6. Enter the size of the volume (if you enter less than the maximum volume size, you can then
create a second RAID array on the remaining portion of your volume) and press <Enter>.
7. Finally, press <Enter> to Create Volume.
8. Exit the Option ROM user interface by pressing <Esc> or going to the EXIT option in the
MAIN MENU.
Loading the Intel Matrix Storage Technology RAID Drivers and Software
1. Begin Windows Setup by booting from the Windows installation CD.
2. At the beginning of Windows Setup, press <F6> to install a third-party SCSI or RAID driver.
When prompted, insert the floppy disk labeled RAID Driver. Install the Intel 82801GR
SATA RAID Controller driver.
3. Finish the Windows installation and install all necessary drivers.
4. Install the Intel Matrix Storage Console software via the Intel Express Installer CD included
with your desktop board or after downloading it from the Internet at
software can be used to manage the RAID configuration.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Setting Up a “RAID Ready” System
The Intel Matrix Storage Technology Console software offers the flexibility to upgrade from a
single Serial ATA drive to RAID without reinstalling the operating system, when a second SATA
hard drive is added to the system.
Follow the steps described in the headings from this section: "Configuring the BIOS for Intel
Matrix Storage Technology" and "Loading the Intel Matrix Storage Technology RAID
Drivers and Software".
Once additional SATA drives have been added, open the Intel Matrix Storage Technology Console
Software and follow the directions to update to a RAID setup.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
A Error Messages and Indicators
Desktop board D945PVS reports POST errors in two ways:
•
•
By sounding a beep code
By displaying an error message on the monitor
BIOS Beep Codes
The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the
video configuration fails (a faulty video card or no card installed) or if an external ROM module
Table 11. Beep Codes
Beep
3
Description
No memory
Siren
CPU overheat (on reboot)
BIOS Error Messages
When a recoverable error occurs during the POST, the BIOS displays an error message describing
Table 12. BIOS Error Messages
Error Message
Explanation
PROCESSOR_THERMAL_TRIP_ERROR CPU was previously shutdown due to a thermal event
(overheating).
MULTI_BIT_ECC_ERROR
SINGLE_BIT_ECC_ERROR
CMOS_BATTERY_ERROR
CMOS_CHECKSUM_ERROR
The firmware has detected that a Multi-Bit ECC Error occurred.
The firmware has detected that a Single-Bit ECC Error occurred.
The firmware has detected that a CMOS battery failure occurred.
The firmware has detected that a CMOS Checksum Error
occurred.
CMOS_TIMER_ERROR
The firmware has detected that the system date/time has not
been set.
MEMORY_SIZE_DECREASE_ERROR
The firmware has detected that the system memory has
decreased.
INTRUDER_DETECTION_ERROR
SPD_TOLER_ERROR
The system chassis was opened.
SERIAL PRESENCE DETECT (SPD) device data missing or
inconclusive. Properly programmed SPD device data is required
for reliable operation. DDR2 533 MHz memory assumed at
slowest timings.
MEM_OPTIMAL_ERROR
The installed amount of memory in Channel A is not equal to the
amount of memory in Channel B. Maximum memory
performance is achieved with equal amounts of memory installed
in each channel.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
62
Download from Www.Somanuals.com. All Manuals Search And Download.
B Regulatory Compliance
This appendix contains the following regulatory compliance information for desktop board
D945PVS:
•
•
•
•
•
Safety regulations
European Union Declaration of Conformity statement
Product Ecology statements
Electromagnetic Compatibility (EMC) regulations
Product certification markings
Safety Regulations
installed in a compatible host system.
Table 13. Safety Regulations
Regulation
Title
UL 60950-1:2003/
CSA C22.2 No. 60950-1-03
EN 60950-1:2002
Information Technology Equipment – Safety - Part 1: General
Requirements (USA and Canada)
Information Technology Equipment – Safety - Part 1: General
Requirements (European Union)
IEC 60950-1:2001, First Edition
Information Technology Equipment – Safety - Part 1: General
Requirements (International)
European Union Declaration of Conformity Statement
We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board
D945PVS is in conformity with all applicable essential requirements necessary for CE marking,
following the provisions of the European Council Directive 89/336/EEC (EMC Directive) and
Council Directive 73/23/EEC (Safety/Low Voltage Directive).
The product is properly CE marked demonstrating this conformity and is for distribution within all
member states of the EU with no restrictions.
This product follows the provisions of the European Directives 89/336/EEC and 73/23/EEC.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Čeština Tento výrobek odpovídá požadavkům evropských směrnic 89/336/EEC a 73/23/EEC.
Dansk Dette produkt er i overensstemmelse med det europæiske direktiv 89/336/EEC &
73/23/EEC.
Dutch Dit product is in navolging van de bepalingen van Europees Directief 89/336/EEC &
73/23/EEC.
Eesti Antud toode vastab Euroopa direktiivides 89/336/EEC ja 73/23/EEC kehtestatud nõuetele.
Suomi Tämä tuote noudattaa EU-direktiivin 89/336/EEC & 73/23/EEC määräyksiä.
Français Ce produit est conforme aux exigences de la Directive Européenne 89/336/EEC &
73/23/EEC.
Deutsch Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 89/336/EEC &
73/23/EEC.
Ελληνικά Το παρόν προϊόν ακολουθεί τις διατάξεις των Ευρωπαϊκών Οδηγιών 89/336/ΕΟΚ και
73/23/ΕΟΚ.
Magyar E termék megfelel a 89/336/EEC és 73/23/EEC Európai Irányelv előírásainak.
Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 89/336/ EEC &
73/23/EEC.
Italiano Questo prodotto è conforme alla Direttiva Europea 89/336/EEC & 73/23/EEC.
Latviešu Šis produkts atbilst Eiropas Direktīvu 89/336/EEC un 73/23/EEC noteikumiem.
Lietuvių Šis produktas atitinka Europos direktyvų 89/336/EEC ir 73/23/EEC nuostatas.
Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej 89/336/EEC u
73/23/EEC.
Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 89/336/ EEC &
73/23/EEC.
Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 89/336/EWG
i 73/23/EWG.
Portuguese Este produto cumpre com as normas da Diretiva Européia 89/336/EEC &
73/23/EEC.
Español Este producto cumple con las normas del Directivo Europeo 89/336/EEC & 73/23/EEC.
Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 89/336/EEC a
73/23/EEC.
Slovenščina Izdelek je skladen z določbami evropskih direktiv 89/336/EGS in 73/23/EGS.
Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 89/336/EEC & 73/23/EEC.
Türkçe Bu ürün, Avrupa Birliği’nin 89/336/EEC ve 73/23/EEC yönergelerine uyar.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance
Product Ecology Statements
The following information is provided to address worldwide product ecology concerns and
regulations.
Recycling Considerations
As part of its commitment to environmental responsibility, Intel has implemented the Intel Product
Recycling Program to allow retail consumers of Intel’s branded products to return used products to
select locations for proper recycling.
Please consult the http://www.intel.com/intel/other/ehs/product_ecology/Recycling_Program.htm
for the details of this program, including the scope of covered products, available locations,
shipping instructions, terms and conditions, etc.
中文
作为其对环境责任之承诺的部分，英特尔已实施 Intel Product Recycling Program
（英特尔产品回收计划），以允许英特尔品牌产品的零售消费者将使用过的产品退还至指定地点作恰
当的重复使用处理。
了解此计划的详情，包括涉及产品之范围、回收地点、运送指导、条款和条件等。
Deutsch
Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das Intel Produkt-
Recyclingprogramm implementiert, das Einzelhandelskunden von Intel Markenprodukten
ermöglicht, gebrauchte Produkte an ausgewählte Standorte für ordnungsgemäßes Recycling
zurückzugeben.
Details zu diesem Programm, einschließlich der darin eingeschlossenen Produkte, verfügbaren
Standorte, Versandanweisungen, Bedingungen usw., finden Sie auf der
Español
Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa
de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel
devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado.
los detalles del programa, que incluye los productos que abarca, los lugares disponibles,
instrucciones de envío, términos y condiciones, etc.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Français
Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en œuvre le
programme Intel Product Recycling Program (Programme de recyclage des produits Intel) pour
permettre aux consommateurs de produits Intel de recycler les produits usés en les retournant à des
adresses spécifiées.
Visitez la page Web http://www.intel.com/intel/other/ehs/product_ecology/Recycling_Program.htm
pour en savoir plus sur ce programme, à savoir les produits concernés, les adresses disponibles, les
instructions d'expédition, les conditions générales, etc.
日本語
インテルでは、環境保護活動の一環として、使い終えたインテル
ブランド製品を指定の場所へ返送していただき、リサイクルを適切に行えるよう、インテル製品リサイクル
プログラムを発足させました。
対象製品、返送先、返送方法、ご利用規約など、このプログラムの詳細情報は、http://www.intel.com/intel/
other/ehs/product_ecology/Recycling_Program.htm （英語）をご覧ください。
Malay
Sebagai sebahagian daripada komitmennya terhadap tanggungjawab persekitaran, Intel telah
melaksanakan Program Kitar Semula Produk untuk membenarkan pengguna-pengguna runcit
produk jenama Intel memulangkan produk terguna ke lokasi-lokasi terpilih untuk dikitarkan semula
dengan betul.
mendapatkan butir-butir program ini, termasuklah skop produk yang dirangkumi, lokasi-lokasi
tersedia, arahan penghantaran, terma & syarat, dsb.
Portuguese
Como parte deste compromisso com o respeito ao ambiente, a Intel implementou o Programa de
Reciclagem de Produtos para que os consumidores finais possam enviar produtos Intel usados para
locais selecionados, onde esses produtos são reciclados de maneira adequada.
Inglês) para obter os detalhes sobre este programa, inclusive o escopo dos produtos cobertos, os
locais disponíveis, as instruções de envio, os termos e condições, etc.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance
Russian
В качестве части своих обязательств к окружающей среде, в Intel создана программа
утилизации продукции Intel (Product Recycling Program) для предоставления конечным
пользователям марок продукции Intel возможности возврата используемой продукции в
специализированные пункты для должной утилизации.
Пожалуйста, обратитесь на веб-сайт
об этой программе, принимаемых продуктах, местах приема, инструкциях об отправке,
положениях и условиях и т.д.
Türkçe
Intel, çevre sorumluluğuna bağımlılığının bir parçası olarak, perakende tüketicilerin Intel markalı
kullanılmış ürünlerini belirlenmiş merkezlere iade edip uygun şekilde geri dönüştürmesini
amaçlayan Intel Ürünleri Geri Dönüşüm Programı’nı uygulamaya koymuştur.
Bu programın ürün kapsamı, ürün iade merkezleri, nakliye talimatları, kayıtlar ve şartlar v.s dahil
bütün ayrıntılarını ögrenmek için lütfen
web sayfasına gidin.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Lead-Free Desktop Board
This desktop board is lead free although certain discrete components used on the board contain a
small amount of lead which is necessary for component performance and/or reliability. This
desktop board is referred to as “Lead-free second level interconnect.” The board substrate and the
solder connections from the board to the components (second-level connections) are all lead free.
the board and accompanying collateral.
Table 14. Lead-Free Board Markings
Description
Lead-Free 2nd Level
Mark
Interconnect: This symbol is
used to identify electrical and
electronic assemblies and
components in which the lead (Pb)
concentration level in the desktop
board substrate and the solder
connections from the board to the
components (second-level
or
interconnect) is not greater than
0.1% by weight (1000 ppm).
or
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance
EMC Regulations
installed in a compatible host system.
Table 15. EMC Regulations
Regulation
Title
FCC Class B
Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B,
Radio Frequency Devices. (USA)
ICES-003 (Class B)
Interference-Causing Equipment Standard, Digital Apparatus. (Canada)
EN55022: 1998 (Class B)
Limits and methods of measurement of Radio Interference Characteristics of
Information Technology Equipment. (European Union)
EN55024: 1998
Information Technology Equipment – Immunity Characteristics Limits and
methods of measurement. (European Union)
AS/NZS CISPR 22
(Class B)
Australian Communications Authority, Standard for Electromagnetic
Compatibility. (Australia and New Zealand)
CISPR 22, 3rd Edition,
(Class B)
Limits and methods of measurement of Radio Disturbance Characteristics of
Information Technology Equipment. (International)
CISPR 24: 1997
Information Technology Equipment – Immunity Characteristics – Limits and
Methods of Measurement. (International)
VCCI (Class B)
Voluntary Control for Interference by Information Technology Equipment.
(Japan)
Japanese Kanji statement translation: This is a Class B product based on the standard of the
Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If
this is used near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
Korean Class B statement translation: This is household equipment that is certified to comply with
EMC requirements. You may use this equipment in residential environments and other non-
residential environments.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel Desktop Board D945PVS Product Guide
Product Certification Markings (Board Level)
Desktop board D945PVS has the product certification markings shown in Table 16:
Table 16. Product Certification Markings
Description
Mark
UL joint US/Canada Recognized Component mark. Includes adjacent UL file
number for Intel desktop boards: E210882.
FCC Declaration of Conformity logo mark for Class B equipment. Includes
Intel name and D945PVS model designation.
CE mark. Declaring compliance to European Union (EU) EMC directive
(89/336/EEC) and Low Voltage directive (73/23/EEC).
Australian Communications Authority (ACA) C-tick mark. Includes adjacent
Intel supplier code number, N-232.
Japan VCCI (Voluntary Control Council for Interference) mark.
S. Korea MIC (Ministry of Information and Communication) mark.
For information about MIC certification, go to
Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark.
Includes adjacent Intel company number, D33025.
Printed wiring board manufacturer’s recognition mark. Consists of a unique UL V-0
recognized manufacturer’s logo, along with a flammability rating (solder side).
70
Download from Www.Somanuals.com. All Manuals Search And Download.
|