Intel Server GS SR195V User Manual

GS-SR195V  
1U Rack Mount Server  
System Installation Guide  
Intel® Pentium Xeon Processor Serverboard  
Rev. 1.1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Content  
Chapter 5 BIOS Setup .......................................................................... 28  
Main ........................................................................................................... 30  
Advanced ................................................................................................... 33  
PCI Configuration ............................................................................................................. 34  
Advanced Chipset Control ............................................................................................. 36  
Advanced Processor Option .......................................................................................... 39  
Peripheral Configuration .................................................................................................. 41  
Hardware Monitor ............................................................................................................ 45  
Security ...................................................................................................... 46  
Server ......................................................................................................... 48  
Console Redirection ........................................................................................................ 48  
Boot ............................................................................................................ 51  
Exit ............................................................................................................. 52  
Chapter 6 Appendix .............................................................................. 55  
6-1: Acronyms ................................................................................................................. 55  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Safety, Care and Regulatory Information  
Important safety information  
Read and follow all instructions marked on the product and in the documentation before you operate  
your system. Retain all safety and operating instructions for future use.  
* The product should be operated only from the type of power source indicated on the rating label.  
* If your computer has a voltage selector switch, make sure that the switch is in the proper position for  
your area. The voltage selector switch is set at the factory to the correct voltage.  
* The plug-socket combination must be accessible at all times because it serves as the main disconnect-  
ing device.  
*All product shipped with a three-wire electrical grounding-type plug only fits into a grounding-type power  
outlet. This is a safety feature. The equipment grounding should be in accordance with local and national  
electrical codes. The equipment operates safely when it is used in accordance with its marked electrical  
ratingsandproductusageinstructions  
* Do not use this product near water or a heat source.  
* Set up the product on a stable work surface or so as to ensure stability of the system.  
* Openings in the case are provided for ventilation. Do not block or cover these openings. Make sure you  
provide adequate space around the system for ventilation when you set up your work area. Never insert  
objects of any kind into the ventilation openings.  
* To avoid electrical shock, always unplug all power cables and modem cables from the wall outlets  
before removing covers.  
*Allow the product to cool before removing covers or touching internal components.  
Precaution for Product with Laser Devices  
Observe the following precautions for laser devices:  
* Do not open the CD-ROM drive, make adjustments, or perform procedures on a laser device other than  
thosespecifiedintheproduct'sdocumentation.  
* Only authorized service technicians should repair laser devices.  
Precaution for Product with Modems, Telecommunications, ot Local Area  
Network Options  
Observe the following guidelines when working with options:  
* Do not connect or use a modem or telephone during a lightning storm. There may be a risk of electrical  
shock from lightning.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SafetyInformation  
* To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.  
* Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.  
* Disconnect the modem cable before opening a product enclosure, touching or installing internal  
components, or touching an uninsulated modem cable or jack.  
* Do not use a telephone line to report a gas leak while you are in the vicinity of the leak.  
Federal Communications Commission (FCC) Statement  
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference when the equipment is operated in a commercial environment. This equipment  
generates, uses, andcanradiateradiofrequencyenergyand, ifnotinstalledandusedinaccordancewith  
the instruction manual, may cause harmful interference to radio communications. Operation of this  
equipment in a residential area is likely to cause harmful interference in which case the user will be  
required to correct the interference at his own expense.  
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission  
limits. Neither the provider nor the manufacturer are responsible for any radio or television interference  
caused by using other than recommended cables and connectors or by unauthorized changes or  
modifications to this equipment. Unauthorized changes or modifications could void the user's authority to  
operatetheequipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause undesired  
operation.  
FCC part 68 (applicable to products fitted with USA modems)  
The modem complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among  
otherinformation,theFCCregistrationnumberandRingerEquivalenceNumber(REN)forthisequipment.  
You must, upon request, provide this information to your telephone company.  
If your telephone equipment causes harm to the telephone network, the Telephone Company may  
discontinue your service temporarily. If possible, they will notify in advance. But, if advance notice is not  
practical, you will be notified as soon as possible.You will be informed of your right to file a complaint with  
the FCC.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Your telephone company may make changes in its facilities, equipment, operations, or procedures that  
could affect proper operation of your equipment. If they do, you will be notified in advance to give you an  
opportunitytomaintainuninterruptedtelephoneservice.  
The FCC prohibits this equipment to be connected to party lines or coin-telephone service.  
The FCC also requires the transmitter of a FAX transmission be properly identified (per FCC Rules Part  
68, Sec. 68.381 (c) (3)).  
/ for Canadian users only /  
Canadian Department of Communications Compliance Statement  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital  
apparatus as set out in the radio interference regulations of Industry Canada.  
Lepresentappareilnumeriquen'emetpasdebruitsradioelectriquesdepassantleslimitesapplicablesaux  
appareilsnumeriquesdeClasseBprescritesdanslereglementsurlebrouillageradioelectriqueedictepar  
IndustrieCanada.  
DOC notice (for products fitted with an Industry Canada-compliant modem)  
The Canadian Department of Communications label identifies certified equipment. This certification  
means that the equipment meets certain telecommunications network protective, operational and safety  
requirements. TheDepartmentdoes notguaranteetheequipmentwilloperatetotheusersatisfaction.  
Before installing this equipment, users ensure that it is permissible to be connected to the facilities of the  
localTelecommunications Company.The equipment must also be installed using an acceptable method  
ofconnection.Thecustomershouldbeawarethatcompliancewiththeaboveconditionsmightnotprevent  
degradation of service in some situations.  
RepairstocertifiedequipmentshouldbemadebyanauthorizedCanadianmaintenancefacilitydesignated  
by the supplier.Any repairs or alterations made by the user to this equipment, or equipment malfunctions,  
may give the telecommunications company cause to request the user to disconnect the equipment.  
Users should ensure for their own protection that the electrical ground connections of the power utility,  
telephone lines and internal metallic water pipe system, if resent are connected together. This precaution  
may be particularly important in rural areas.  
Caution: Users should not attempt to make such connections themselves, but should contact the  
appropriate electric inspection authority, or electrician, as appropriate.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SafetyInformation  
NOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage of the total  
load to be connected to a telephone loop which is used by the device, to prevent overloading. The  
termination on a loop may consist of any combination of devices subject only to the requirement that the  
sum of the Load Numbers of all the devices does not exceed 100.  
/ for European users only /  
CAUTION  
Danger of explosion if battery is incorrectly  
replaced.  
Replace only with the same or equivalent  
type recommended by the manufacturer.  
Dispose of used batteries according to the  
manufacturersinstructions.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Introduction  
Welcome to Gigabyte GS-SR195V Rack mount Server System Installation Guide. The guide  
provides instructions for configuration hardware for the GS-SR195V your system.  
This installation guide will assist you in installing all the essential components for the sever system.  
For your protection, please read and undertand all of the safety and operating instructions regarding your  
Gigabyte Server and retain for future reference. The procedures in this guidebook assusme that your are  
a system or network administrator experienced in installing similar hardware.  
Contents Packages  
Whenopeningthepackage,pleaseensure thesystemcomponentsarenotdamagedduringtheshipping.  
Using the following checklist to verify the contents. If any component is missing or damaged in the  
system, please contact your vendor immediately.  
; Chassis  
;
;
;
;
;
;
GA-9IVDPC Motherboard (Installed)  
GC-REIU (PCI-E Riser Card)  
CPU Heat Sink x 2  
; Power Supply (Installed)  
; FAN Duct x 1  
; Silm type CD-ROM drive (Installed)  
; GS-SR195V System Installation Guide  
; Driver CD for motherboard driver & utility  
Cables (RJ45)  
Case Handle Kit x 2  
COM2 Cable x 1  
WARNING!  
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To  
protect them against damage from static electricity, you should follow some precautions whenever you  
work on your computer.  
1. Unplug your computer when working on the inside.  
2. Use a grounded wrist strap before handling computer components. If you do not have  
one, touch both of your hands to a safely grounded object or to a metal object, such as  
the power supply case.  
3. Hold components by the edges and try not touch the IC chips, leads or connectors, or  
othercomponents.  
4. Place components on a grounded antistatic pad or on the bag that came with the  
components whenever the components are separated from the system.  
5. Ensure that theATX power supply is switched off before you plug in or remove theATX  
powerconnectoronthemotherboard.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Feature Summary  
Chapter 1 Features Summary  
Motherboard  
GA-9IVDPC  
Processor Supported Dual socket 604 for Intel® Xeon(Nocona/Irwindale) processor  
suopprts 3.6 GB and upper  
Intel® Xeon (Nocona/Irwindale) CPUs supports 800 MHz FSB  
2nd cache depend on CPU  
Intel® E7320 Chipset  
Intel® 6300ESB  
Chipset  
System Memory:  
Memory Capacity  
Supports maximum 32GB with DDR 266  
Supports maximum 16GB with DDR333  
8 x Registered DDR 266 scoket  
6 x Registered DDR 333 scoket  
Single-bit Errors Correction, Multiple Bit Errors Detection  
DIMM Sparing support, support for RASUM fail-over to an on-line  
spare DIMM device  
Memory Type  
Error Correction:  
AdditionalFeatures  
Expansion Slot  
RAID Supported  
Cooling Fans:  
1 riser card supports 1 x PCI-X 64/66MHz add-on card  
1 x PCI-E x8 slot  
Adaptec® 7901X  
Supports Host RAID 0,1,10  
4 X CPU Fans  
1 X Power Fan  
Integrated LANs:  
Controller  
Broadcom® BCM5721 and BCM 5705 GbE  
WOL, Teaming, ALB, AFT  
Features  
BCM5721 supports PCI-Express  
BCM5705 suports PCI 32/33MHz  
Integrated Graphics:  
Controller  
IntegratedATIRageXL  
Mass Storage System 4 x Hot Swapable SCSIHDDs  
1 Slim Type 24X CD-ROM  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
SCSI Controller:  
Controller  
AdaptecAIC- 7901X chipset  
RAID Supported  
Features  
Supports Host RAID RAID 0, 1 and 10 data protection  
Mirroringsupportsautomaticbackgroundrebuilds  
Features LBA and Extended Interrupt 13 drive translation in  
controller onboard BIOS  
ZCRSupported(Optional) One SO-DIMM I/F on board support for ZCR card extension  
OptionalAdaptecASR2015S& ASR2025S ZCR  
Supports Hardware RAID 0,1,5,10,50, JBOO  
Power SW, Reset SW, NMI SW, UID SW,  
2 x LAN LED  
Front Panel  
1 x Power/Sleep LED  
1 x HDD LED  
1 x System Status LED  
2 x USB  
Super I/O  
Controller  
ITE IT8712F-IX  
AdditionalFeatures  
Hardware Monitor  
Supports Wake on Ring  
CPU/System Fan Revolution detect  
CPU/System temperature detect  
System Voltage Detect  
Built-in I/O  
2 x Serial ports (COM, 1 at rear and 1 at front)  
1 x USB 2.0 dual-port connector  
1 x VGA connector  
2 x RJ45 LAN ports  
P/S 2 Keyboard and Mouse Connectors  
System BIOS:  
BIOS Type  
Lincensed Phoenix on 8Mb Flash RAM  
Supportsmultibootfunction  
SpecialFeatures  
User setting for hardware monitoring  
Supports PXE  
ACPI 1.0 Compliant/ ACPI defined S1, S4, and S5  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Server Management Functions:  
BMC Chip  
NS IPMI 1.5 controller  
FailureDetection  
Event Logging  
IPMI 1.5 specification of Server management  
32KB Nonvolatile Memory to Log System Failure Events  
Follow the IPMI 1.5 specification of Server management  
RemoteManagement  
Environment  
AmbientTemperature  
Operating Temperature: 5oC to 35oC  
Non-operatingTemperature: 0oC to 50oC  
10-80% operating Humidity at 30o C  
FCC, CE, BSMI, CB,  
Relative Humidity  
Safety Regulations  
System Dimention:  
19"W x 1.73"H x 19.5"D  
Electrical Power Supply Single Power Supply 480W  
Note:  
1. If you want to purchase USB FDD, we suggest MITSUMI as  
recommended brand.  
2. The extended lan port is difficult to unplug, please handle it carefully.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Chapter 2 System Hardware Installation  
Please observe the safety information in chapter Important Safety Information”  
Do not expose the server to extreme environmental conditions. Protect it from dust,  
humidity, and heat.  
Step 2-1: Chassis Removal and Installation  
Step 1 Loosen thscrew from the top cover.  
Step 2 Push down the indentation located at two sides of the chassis, and slide toward to remove the  
top cover.  
Step 3 Reverse Step 1, and 2 to replace the chassis cover.  
Step 2  
Step 1  
Screw  
Note: Before installing CPU, you must remove the FAN duct. For FAN duct removal, please  
see Sub-section 2-7 FAN Duct Removal and Installtionfor detail instruction.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation Process  
Step 2-2: CPU Installation  
Please make sure the CPU type and speed that are supported by the motherboard.  
Step 1 Raise the locking bar on the socket.  
Step 2 Aligning the pins of the processor with the socket, insert the processor into the socket.  
Step 3 Close the handle completely and finish CPU installation.  
Step 1  
Step 2  
Pin1 indicator  
Step 3  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Step 2-3: Heat Sink Installation  
Step 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well  
remember to apply the thermal conductivity compound on the CPU.  
Step 2 Seat the heat sink with the four screws. Installation completed.  
Step 1  
Step 2-4: Memory Installation  
1. The DIMM slot has a notch, so the DIMM memory module can only fit in one direction.  
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it down.  
3. Close the plastic clip at both edges of theDIMM slots to lock the DIMM module.  
4. DIMM must be populated in order starting at the farthest slot from the MCH chipset.  
Each logical DIMM must be made of two identical DIMMs having the same device size on  
each and the same DIMM size.  
5. Reverse the installation steps when you wish to remove the DIMM module.  
For detail DIMM Population, please refer to section 4-2: DDR DIMM Slot Population  
Step 2  
Step 1  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation Process  
Step 2-5: PCI Expansion Card Installation  
GS-SR195V provides expansion riser slot for one PCI-X 64/66MHz slot; and one with PCI-E  
x8 and x4 slots. To install the peripheral, please go through the following steps.  
Note:  
Before installing the PCI expansion card, please check the card size limitation. Size limitation for  
PCI-E is listed below:  
Heigth: 18.73mm(max) ; Length: 167.65mm(max) ; Width: 52mm(max)  
Step 1 Lift the riser bracket slightly, then pull it out from the server chassis.  
Step 2 Align the expansion card with the guiding groove. Slide the expansion card into the slot until  
the card firmly seats.  
Step 3 Align the riser bracket to the system module (see the arrow direction mark 1), and push  
it to locked position.  
Note!! The riser bracket must be firmtly seated into the module. (See the arrowdirection),  
or it will cause power connection losses.  
Step 4 Reverse Step 1 & 2 to lock the riser bracket firmly. Installation completed.  
Step 1  
Step 2  
Step 3  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Step 2-6: Hard Disk Drive Installation  
Step 1 Press the release button and pull the blank out of the drive bay.  
Step 2 Remove the hard disk blank. Slide hard disk into blank and secure it with screws.  
Step 3 Slide the drive into the cage until it clicks, locking the drive into place. Connect cable and  
power.  
Step 2  
Step 1  
Release button  
Step 2-7: FAN Duct Removal and Installation  
Step 1 Pull up the screw-holder and lossen the thumbscrews. Lift up to remove the fan duct.  
Step 2 For FAN Duct Installation, place the fan duct on the top of heat sinks. Fasten the screws to the  
locked position and push down the screw-holders.  
Step 1  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation Process  
Step 2-8: ZCR Installation and Removal (Optional Device)  
Step 1 Aling a ZCR on the module such that the notch on the ZCR exactly match the notches in  
themodule.  
Step 2 Push the card in untill it clicks. Then, press down the card vertically.  
Step 3 To remove the ZCR card, unlock the ZCR retaining clips.  
Step 1  
Step 2  
Step 3  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Chapter 3 Appearance of GS-SR195V  
3-1: Front View of GS-SR195V  
Slim Type CD-ROM  
USB Connector  
LEDs  
Hot swap SCSI HDDs  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SystemAppearance  
3-2: Rear View of GS-SR195V  
ꢅ ꢇ  
PS/2 Connectors  
USB Connectors  
LAN1 Port (RJ45)  
LAN2 Port (RJ45)  
COM Port  
VGA Port  
Limited Low-Profile Riser Slot  
Full-Height Riser Slot  
Power cord  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
3-3: Switch and LED Indicators Introduction  
LAN1/2 Activities  
System Event LED  
Reset  
ID BTN&LED  
Power  
HDD  
NMI  
Name  
Color  
Green  
Green  
--  
Condition  
On  
Description  
Power  
Power On  
Blink  
Off  
Sleep (S1)  
Power Off (S4)  
SYS  
Amber  
Blink  
System Ready but degraded, CPU Failed,  
DIMM Killed  
(System)  
Amber  
On  
Critical Alarm: Critical Power Module Failure,  
Critical FANs Failure, Voltage (Power Supply)  
CriticalTeemperatureandVoltage  
System healthy.  
--  
Off  
HDD  
Green  
Amber  
Amber  
--  
Blink  
On  
Hard Disk Drive Access  
HDD Fault  
Blink  
Off  
HDD Rebuild  
No Access and No HDD Fault  
LAN Link / No access  
LAN access  
LAN1  
Green  
Green  
--  
On  
Activity  
Blink  
Off  
Idle  
LAN2  
Green  
Green  
--  
On  
LAN Link / No access  
LAN access  
Activity  
Blink  
Off  
Idle  
ID  
Blue  
On  
Untiselectedforidentification  
Noidentification  
(Identification) --  
Off  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LED Description  
3-4: LAN LED Description  
Name  
Color  
Condition  
ON  
Description  
LAN  
Green  
LAN Link / no Access  
LAN Access  
Link/ActivityGreen  
BLINK  
OFF  
-
Idle  
GbE LAN Yellow  
ON  
1Gbpsconnection  
100Mbpsconnection  
10Mbpsconnection  
Speed  
Green  
-
ON  
OFF  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
3-5 : Connector Icon Description  
Suggest Icon  
Description  
Keyboard  
VGA  
Mouse  
LAN  
Serial Port  
USB  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MotherboardLayout  
Chapter 4 Motherboard Layout & Jumper Setting  
4-1: GA-9IVDPC Motherboard Layout  
I
H
EC4  
X
F
B
A1T  
K
J
L
G
C
V
M
U
N
O
W
S
D
P
Q
R
E
1
A
B
T
1
7
1
7
1
7
1
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
A
B
C
D
E
F
CPU 0  
M
N
O
P
DDRA2  
CPU1  
DDR B2  
Intel MCH E7320  
ATIRage-XL  
Intel 6300ESB  
Broadcom® BCM5705  
Broadcom® BCM 5721  
IT8712F-IX  
COM2  
DDR A3  
DDR B3  
Q
R
S
DDR A4  
DDR B4  
G
H
I
IPMI Connector  
AdaptecAIC-7901X  
PCI-X_1 (64/66MHz)  
PCI-E ( x4 Lane x8 Slot )  
SO-DIMM Type ZCR Extention Slot **  
Battery  
T
U
V
W
X
J
GPIO  
K
L
DDRA1  
DDR B1  
**This device is use for Adaptec ASR-2015s and ASR-2025s ZCR population.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MotherboardLayout  
4-2: DDR DIMM Slot Population  
Table 4-2-1: Supported DDR266 DIMM Populations  
NOTE!! For DDR-266 DIMM population, DIMM must be populated starting from  
the A4/B4 slots.  
DIMM Configuration  
1 Single Rank  
DIMM1  
Empty  
Empty  
Empty  
DIMM2  
Empty  
Empty  
Empty  
Empty  
Empty  
DIMM3  
Empty  
Empty  
DIMM4  
Single Rank  
Dual Rank  
1 Dual Rank  
2 Single Rank  
Single Rank Single Rank  
1 Dual Rank, 1 Single Rank Empty  
Dual Rank  
Dual Rank  
Single Rank  
Dual Rank  
2 Dual Rank  
Empty  
Empty  
3 Single Rank  
Single Rank Single Rank Single Rank  
1 Dual Rank, 2 Single Rank Empty  
2 Dual Rank, 1 Single Rank Empty  
Dual Rank  
Dual Rank  
Dual Rank  
Single Rank Single Rank  
Dual Rank  
Dual Rank  
Single Rank  
Dual Rank  
3 Dual Rank  
Empty  
4 Single Rank  
Single Rank  
Single Rank Single Rank Single Rank  
Single Rank Single Rank Single Rank  
1Dual Rank, 3 Single Rank Dual Rank  
2 Single Rank, 2 Dual Rank Dual Rank  
3 Dual Rank, 1 Single Rank Dual Rank  
Dual Rank  
Dual Rank  
Dual Rank  
Single Rank Single Rank  
Dual Rank  
Dual Rank  
Single Rank  
Dual Rank  
4 Dual Rank  
Dual Rank  
Table 4-2-2: Supported DDR333 DIMM Populations  
NOTE!! For DDR-333 DIMM population, DIMM must be populated starting from  
the A3/B3 slots. A4/B4 slots cannot be applied for DDR-333 DIMM. The  
mainboard only supports 6 DIMMs for DDR-333.  
DIMM Configuration  
1 Single Rank  
DIMM1  
Empty  
Empty  
Empty  
DIMM2  
Empty  
Empty  
DIMM3  
Single Rank  
Dual Rank  
1 Dual Rank  
2 Single Rank  
Single Rank Single Rank  
1 Dual Rank, 1 Single Rank Empty  
Dual Rank  
Dual Rank  
Single Rank  
Dual Rank  
2 Dual Rank  
Empty  
3 Single Rank  
Single Rank  
Single Rank Single Rank  
Single Rank Single Rank  
1 Dual Rank, 2 Single Rank Dual Rank  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
4-3: Jumper Setting  
CLR_CMOS ( (Clear CMOS Function)  
You may clear the CMOS data to its default values by this jumper.  
Default value doesnt include the “Shunter” to prevent from improper use this jumper.  
To clear CMOS, temporarily short 1-2 pin.  
EC4  
B
A1T  
1 1-2 close: Clear CMOS  
1
2-3 close: Normal (Default value)  
1
1
7
1
7
1
7
1
BIOS_TBL (CMOS Lock Function)  
EC4  
B
A1T  
1-2 close: Top block lock  
1
1
2-3 close: Disable Top block  
function (Default value)  
1
1
7
1
7
1
7
1
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Jumper Setting  
BIOS_WP (BIOS Werite Protect Function)  
EC4  
B
A1T  
1-2 close: Enable BIOS Write Protect  
1
Function  
2-3 close: BIOS writable. (Default value)  
1
1
1
7
1
7
1
7
1
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Chapter 5 BIOS Setup  
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the  
basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it  
retains the Setup information when the power is turned off.  
ENTERINGSETUP  
Power ON the computer and press <F2> immediately will allow you to enter Setup.  
CONTROLKEYS  
<Ç>  
<È>  
<Å>  
<Æ>  
<Esc>  
Move to previous item  
Move to next item  
Move to the item in the left hand  
Move to the item in the right hand  
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and  
Option Page Setup Menu - Exit current page and return to Main Menu  
<+/PgUp> Increase the numeric value or make changes  
<-/PgDn> Decrease the numeric value or make changes  
<F1>  
<F2>  
<F3>  
<F4>  
<F6>  
<F7>  
<F8>  
<F9>  
<F10>  
General help, only for Status Page Setup Menu and Option Page Setup Menu  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
Reserved  
LoadtheOptimizedDefaults  
Save all the CMOS changes, only for Main Menu  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
GETTINGHELP  
MainMenu  
The on-line description of the highlighted setup function is displayed at the bottom of the screen.  
Status Page Setup Menu / Option Page Setup Menu  
Press F1 to pop up a small help window that describes the appropriate keys to use and the  
possible selections for the highlighted item. To exit the Help Window press <Esc>.  
z
z
Main  
This setup page includes all the items in standard compatible BIOS.  
Advanced  
This setup page includes all the items ofAMI special enhanced features.  
(ex:Auto detect fan and temperature status, automatically configure hard disk parameters.)  
z
z
z
z
Security  
Change, set, or disable password. It allows you to limit access the system and setup.  
Server  
Serveradditionalfeatures enabled/disabledsetupmenus.  
Boot  
This setup page include all the items of first boot function features.  
Exit  
There are five optionsin this selection: Exit Saving Changes, Exit Discarding Changes, Load  
Optimal Defaults, Load Failsafe Defaults, and Discard Changes.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Main  
Once you enter Phoenix BIOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. Use  
arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
[00:13:12]  
Server  
Boot  
Exit  
System Time:  
System Date:  
Item Specific Help  
[01/01/2005]  
IDE Channel 0 Master  
IDE Channel 0 Slave  
IDE Channel 2 Master  
IDE Channel 3 Slave  
System Information  
[CD-ROM]  
[None]  
[None]  
[None]  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 1: Main  
System Time  
The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS)  
SystemDate  
Set the System Date. Note that the Dayautomatically changed after you set the date.  
(Weekend: DD: MM: YY) (YY: 1099~2099)  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
IDE Channel 0 Master, Slave / Channel 1 Master, Slave, Serial ATA  
ThecategoryidentifiesthetypesofharddiskfromdriveCtoFthathasbeeninstalledinthecomputer.  
There are two types: auto type, and manual type. Manual type is user-definable;Auto type which will  
automatically detect HDD type.  
Note that the specifications of your drive must match with the drive table. The hard disk will not work  
properly if you enter improper information for this category.  
If you select User Type, related information will be asked to enter to the following items. Enter the  
information directly from the keyboard and press <Enter>. Such information should be provided in the  
documentation form your hard disk vendor or the system manufacturer.  
TYPE  
1-39: Predefined types.  
Users: Set parameters by User.  
Auto: Set parameters automatically. (Default Vaules)  
CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD parameters  
automatically.  
ATAPI Removable: Removable disk drive is installed here.  
Multi-Sector Transfer  
This field displays the information of Multi-Sector Transfer Mode.  
Disabled: The data transfer from and to the device occurs one sector at a time.  
Auto: The data transfer from and to the device occurs multiple sectors at a time if the device  
supportsit.  
LBA Mode  
This field shows if the device type in the specific IDE channel  
support LBA Mode.  
32-Bit I/O  
Enable this function to max imize the IDE data transfer rate.  
This field shows the information ofTeansfer Mode.  
Transfer Mode  
Ultra DMA Mode  
This filed displays the DMA mode of the device in the specific IDE  
channel.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
SystemInformation  
This category includes the information of Processor Type, Speed, Extended memory, BIOS Version,  
BIOS Date, System Product Name, System serial number, System version, System UUID, Main Board  
ID, and Main Board Serial number.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Advanced  
About This Section: Advanced  
With this section, allowing user to configure your system for basic operation. User can change the  
processor options, chipset configuration, PCI configuration and chipset control.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Server  
Boot  
Exit  
PCI Configuration  
Item Specific Help  
Advanced Chipset Control  
Advanced Processor Option  
Peripheral Configuration  
Hardware Monitor  
Reset Configuration Data  
ClkGen Spread Spectrum  
System After AC Back  
Extended Memory Testing  
Network Server  
[No]  
[Disabled]  
[Pre-State]  
[Enabled]  
[Enabled]  
[Enter]  
Clear Case Open Log  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 2: Advanced  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
PCI Configuration  
PhoenixBIOS Setup Utility  
PCI Configuration  
Embedded Vedio Controller  
Embedded SCSI Controller  
Embedded NIC  
Item Specific Help  
Embedded NIC (Gbit#2)  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 2-1: PCI Configuration  
EmbeddedVideoController  
Onboard VGA Control  
Enabled  
Disabled  
Enable onboard VGA device. (Default value)  
Disablethisfunction.  
EmbeddedSCSIController  
Option ROM Scan  
Enabled  
Enableing this item to initialize device expansion ROM.  
(Defualtvalue)  
Disabled  
Disablethisfunction.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
EmbeddedNIC (Gbit #1 / 2)  
Onboard LAN Control  
Enabled  
Disabled  
Enable onboard LAN 1 / 2 device. (Default value)  
Disablethisfunction.  
Option ROM Scan  
Enabled  
Enableing this item to initialize device expansion ROM.  
Disable this function. (Defualt value)  
Disabled  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Advanced Chipset Control  
PhoenixBIOS Setup Utility  
Advanced Chipset Control  
USB Controller  
Item Specific Help  
[Enabled]  
[Disabled]  
[Enabled]  
[Enabled]  
[Enabled]  
[128MB]  
[Enabled]  
[Auto]  
Legacy USB Support  
Force Compliance Mode  
PCI-E port A Device 2  
PCI-E port A1 Device 3  
4GB PCI Hole Granularity  
Data Parity Error Recovery  
Memory Frequency  
Wake On LAN  
[Enabled]  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 2-2: Advanced Chipset Control  
USB Controller  
This item allows users to enable or disable the USB device by setting item to the desired value.  
Enabled  
Options  
Enable USB controller. (Default value)  
Disbalethisfunction.  
Legacy USB Support  
This option allows user to function support for legacy USB.  
Enabled  
Disabled  
Enables support for legacy USB. (Default Value)  
Disables support for legacy USB.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
ForceComplianceMode  
This option allows user to function PCI-E Compliance mode by setting item to desired value.  
Enabled  
Disabled  
Enables PCI-E Force Compliance mode. (Default Value)  
Disables this function.  
PCI-E portA Device 2  
Force PCI Express v1.0 Compability Mode, this PCI-E port A by setting to desired value.  
Force PCI Express 1.0  
Enabled  
Force PCI Express v1.0 Compability Mode.  
Enables PCI-E port A Device2 (Default Value)  
Disables this function.  
Disabled  
PCI-E portA1 Device 3  
Force PCI Express v1.0 Compability Mode, this PCI-E port A1 by setting to desired value.  
Force PCI Express 1.0  
Enabled  
Force PCI Express v1.0 Compability Mode.  
Enables PCI-E port A1 Device3 (Default Value)  
Disables this function.  
Disabled  
4GB PCI HoleGranularity  
Select the granularity of PCI hole for PCI resource. If MTRRS are not enough, we may use this  
option to reduce the MTRR occupation.  
128MB  
256MB  
Select 128MB as granularity of PCI hole. (Default value)  
Select 256MB as granularity of PCI hole.  
Data Parity Error Recovery  
Enabled  
Enabledataparityerrorrecoveryfunction.(Defaultvaules)  
Disablethisfunction.  
Disabled  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
MemoryFrequency  
Determine the specifiy memory frequency.  
266MHz  
333MHz  
Auto  
Select 266MHz as memory frequecncy for system.  
Select 333MHz as memory frequecncy for system.  
Auto determine memory frequency for system.  
(Defaultvalues)  
Wake On LAN  
This option allow user to determine the action of the system when a LAN wake up occurs.  
Enabled  
Disabled  
Enable Wake On LAN. (Default value)  
Disablethisfunction.  
Note: This item must enabled if youre running under Windows operating system.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Advanced Processor Option  
PhoenixBIOS Setup Utility  
Advanced Processor Option  
Hyper Threading Technology  
Machine Cecking  
Item Specific Help  
[Enabled]  
[Disabled]  
[Disabled]  
[Enabled]  
Thermal Management 2  
Adjacent Cache Line Prefetch  
Set Max Ext CPUID = 3  
Thermal Management 1  
NX Protection  
[Disabled]  
[Disabled]  
[Enabled]  
F1: Help  
Esc: Exit  
KL: Select Item  
+ -: Change Values  
F5: Setup Defaults  
IJ: Select Menu  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 2-3: Advanced Processor Option  
HyperThreading Technology  
Enabled  
Enables Hyper-Threading Technology Feature when using Windows  
XP operating systems that are optimized for Hyper-Threading  
technology. (Default value)  
Disabled  
Disables Hyper-ThreadingTechnology when using other operating  
systems.  
Machine Checking  
Enabled  
Disabled  
EnableMachine Checking. (Default value)  
Disablethisfunction.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Thermal Managerment 2  
Select between TM1 and TM2.  
Enabled  
Disabled  
Select Thermal Management 2 function.  
Disable this function. (Default value)  
Adjacent Cache Line Prefetch  
Enabled  
Processor will fetch both cache lines when it requires data that is not  
currently inits cache. (Defualt value)  
Disabled  
Processor will only fetch the cache line that contains the data currently  
required by the processor.  
Set Max Ext CPUID = 3  
Set MAX CPUID extended function value to 3.  
Enabled  
Disabled  
Enable Set Max Ext CPUID = 3 function.  
Disable this function. (Default value)  
Thermal Managerment 1  
If enabled, when the thermal sensor indicates that the die temperature is at the pre-determined  
threshold, the processor will reduce the bus to core ratio and operating voltage.  
Enabled  
Disabled  
Enable Thermal Management 1 function. (Default value)  
Disablethisfunction.  
NX Protection  
This category provides user to enable virus protection avoiding unknow and spite attack.  
Enabled  
Disabled  
NX Protection function. (Default value)  
Disablethisfunction.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Peripheral Configuration  
PhoenixBIOS Setup Utility  
Peripheral Configuration  
Serial Port A  
Base I/O address/IRQ  
Serial Port B  
Item Specific Help  
[Enabled]  
[3F8/IRQ4]  
[Enabled]  
[2F8/IRQ3]  
[Enabled]  
[Enabled]  
[Both]  
Base I/O address/IRQ  
Floppy disk controller  
Floppy Check  
Parallel ATA  
Serial ATA  
[Enabled]  
[Auto]  
Native Mode Operation  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 2-4: Peripheral Configuration  
Serial Port A  
This allows users to configure serial protA by using this option.  
Disabled  
Enabled  
Disabletheconfiguration.  
Enable the configuration (Default value)  
Base I/O Address/IRQ  
3F8/IRQ4  
Set IO address to 3F8. (Default value)  
Set IO address to 2F8.  
2F8/IRQ3  
3E8/IRQ4  
2E8/IRQ3  
Set IO address to 3E8.  
Set IO address to 2E8.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Serial Port B  
This allows users to configure serial prot B by using this option.  
Disabled  
Enabled  
Disabletheconfiguration.  
Enable the configuration (Default value)  
Base I/O Address/IRQ  
3F8/IRQ4  
Set IO address to 3F8.  
2F8/IRQ3  
3E8/IRQ4  
2E8/IRQ3  
Set IO address to 2F8. (Default value)  
Set IO address to 3E8.  
Set IO address to 2E8.  
Floppy disk controller  
Enabled  
Enable the floppy disk controller. (Default value)  
Disable the device.  
Disabled  
Floppy Check  
Enabled  
Enable the device to verify floppy typer when system boot.  
Disable the this function. (Default value)  
Disabled  
ParallelATA  
Disabled  
Disable the device.  
Both  
Select both Channel 0 and Channel 1 as ParallelATA.  
(Defaultvalue)  
Channel 0  
Channel1  
Select both Channel 0 as ParallelATA.  
Select both Channel 1 as ParallelATA.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Serial ATA  
Enabled  
Enable Serial ATAdevice. (Default value)  
Disable the SerialATA.  
Disabled  
NativeModeOperation  
This option allows user to set the native mode for ATAfunction.  
Note that certain OS is not supported under Native Mode.  
Auto  
Autodetected. (Defaultvalue)  
Set Native mode to Serial ATA.  
SerialATA  
ParallelATA Set Native mode to ParallelATA.  
Reset ConfigurationData  
Yes  
No  
Clear the Extended System Configuration Data (ESCD) area.  
Disable this function. (default value)  
ClkGen Spread Spectrum  
Enabled  
Disabled  
Enable ClkGen Spread Spectrum.  
Disabled this function. (Default value)  
System AfterAC Back  
Set the mode od operation if anAC/Power loss occurs.  
Power On  
Stay Off  
Power on system without pressing power button.  
Keep the power off until the power button is pressed.  
Pre- State  
Set system to the last sate when AC power is removed. Do not power on  
system when AC power is back. (Default value)  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
ExtendedMemoryTesting  
Determine which type of tests will be performed extended memory. (above 1M)  
Enabled  
Disabled  
Enable Extended Memory Testing. (Default value)  
Disablethisfunction.  
Network Server  
Enabled  
System will be secured at boot to prevent tampering during network  
operation.(Defaultvalue)  
Disabled  
Disablethisfunction.  
Clear Case Open Log  
Press [Enter] to clear the Case Open Log.  
When you press <Enter> on this item, you will get a confirmation dialog box with a message  
as below:  
Setup Confirmation  
Are you sure to clear the Case Open Log?  
[Yes]  
[No]  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Hardware Monitor  
PhoenixBIOS Setup Utility  
Hardware Monitor  
CPU 1 Temperature  
CPU 2 Temperature  
System Temperature  
Item Specific Help  
38C/100F  
38C/100F  
38C/100F  
33C/091F  
33C/091F  
33C/091F  
W83792d Temperature  
W83792d Temperature 2  
W83792d Temperature 3  
Voltage Monitor  
Fan Monitor  
1
F1: Help  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Esc: Exit  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 2-5: Hardware Monitor  
CPU 1&2/ System/ W83792d 1/2/3 Temperature  
Display the current CPU1/2 temperature, System, and W83792d 1/2/3 ambient temperature.  
Voltage: VCORE 1&2/ 3.3V/ +12V / 1.5V / 2.5V  
Detect system's voltage status automatically.  
FAN(RPM)  
Display the current CPUs, and Power FAN speed.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Security  
PhoenixBIOS Setup Utility  
Security Server Boot  
Clear  
Main  
Advanced  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Set Supervisor Password  
Set User Password  
Password On Boot  
[Enter]  
[Enter]  
[Disabled]  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 3: Security  
*
About This Section: Security  
In this section, user can set either supervisor or user passwords, or both for different level of  
password securities. In addition, user also can set the virus protection for boot sector.  
Set Supervisor Password  
You can install and change this options for the setup menus. Type the password up to 6  
characters in lengh and press <Enter>. The password typed now will clear any previously  
entered password from the CMOS memory. You will be asked to confirm the entered  
password. Type the password again and press <Enter>. You may also press <Esc> to abort  
the selection and not enter a specified password or press <Enter> key to disable this option.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Set User Password  
You can only enter but do not have the right to change the options of the setup menus. When  
you select this function, the following message will appear at the center of the screen to assist  
you in creating a password.  
Type the password up to 6 characters in lengh and press <Enter>. The password typed now  
will clear any previously entered password from the CMOS memory. You will be asked to  
confirm the entered password. Type the password again and press <Enter>. You may also  
press <Esc> to abort the selection and not enter a specified password.  
Password on boot  
Password entering will be required when system on boot.  
Enabled  
Disabled  
Requries entering password when system on boot.  
Disable this function. (Default value)  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Server  
PhoenixBIOS Setup Utility  
Security Server Boot  
Main  
Advanced  
Exit  
Console Redirection  
Halt On  
Item Specific Help  
[Mid]  
Clear Mem. ECC Error Info.  
Fatal A on port A  
[Disabled]  
[Enabled]  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 4: Server  
Console Redirection  
PhoenixBIOS Setup Utility  
Console Redirection  
Com Port Address  
Baud Rate  
Item Specific Help  
[19.2K]  
[Direct]  
[CTS/RTS]  
[Off]  
Console Type  
Flow Control  
Continue C.R after POST  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 4-1: Console Redirection  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Com PortAddress  
If this option is set to enabled, it will use a port on the motherboard.  
On-board COMA  
On-board COMB  
Disabled  
Use COMA as he COM port address.  
Use COMB as he COM port address.  
Disable this function. (Default value)  
BaudRate  
This option allows user to set the specified baud rate.  
Options  
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.  
ConsoleType  
This option allows user to select the specified console type. This is defined by IEEE. PC-ANSI  
is the standard PC-type terminal. Note that for VT100+, you must select English as your  
languuage. And VT-UTF8 uses unicode.  
Options  
vt100, vt100+, vt100 8bit, PC ANSI 7bit, PC-ANSI, VT-UTF8.  
FlowControl  
Enables Flow Control when EMP is dahring the same serial port as console redirection, the flow  
control must be set to CTS/RTS or CTS/RTS+CD depending on whether a modem is used.  
None  
Notsupported.  
XON/OFF  
CTS/RTS  
Softwarecontrol.  
Hardware control. (Default values)  
Continue C.R. after POST  
This option allows user to enable console redirection after O.S has loaded.  
On  
Off  
Enable console redirection after O.S has loaded.  
Disable this function. (Default value)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
HaltOn  
The category determines whether the computer will stop if an error is detected during power up.  
NO Errors  
All Errors  
Mid  
The system boot will not stop for any error that may be detected  
and you will be prompted.  
Whenever the BIOS detects a non-fatal error the system will be  
stopped.  
The system boot will not stop for a keyboard or disk error; it will  
stop for all other errors. (Default value)  
ClearMem. ECCErrorInfo  
Enabled  
Disabled  
Enable Clear memory ECC error information function.  
Disable this function. (Default value)  
Fatal Erroron portA  
Enabled  
Enable Fatal Erre on portA. (Default value)  
Disablethisfunction.  
Disabled  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Boot  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Server  
Boot  
Exit  
Item Specific Help  
+ CD-ROM Drive  
+ Hard Drive  
Removable Device  
MBA V8.1.53 Slot 0100  
MBA V8.1.53 Slot 0420  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 5: Boot  
*
About This Section: Boot  
The Boot” menu allows user to select among four possible types of boot devices listed  
using the up and down arrow keys. By applying <+> and <Space> key, you can promote  
devices and by using the <-> key, you can demote devices. Promotion or demotion of devices  
alerts the priority that the system uses to search for boot device on system power on.  
Boot Device Priority  
` Removable Device / Hard Drive / CD-ROM Drive/  
These three fields determines which type of device the system attempt to boot from after  
PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the  
first device is not a bootable device, the system will seek for next available device.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Exit  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Server  
Boot  
Exit  
Exit Saving Changes  
Exit Discarding Changes  
Load Settup Default  
Discard Changes  
Item Specific Help  
Save Changes  
F1: Help  
Esc: Exit  
KL: Select Item  
IJ: Select Menu  
+ -: Change Values  
F5: Setup Defaults  
Enter: SelectSub-Menu F10: Save&Exit  
Figure 6: Exit  
*
About This Section: Exit  
Once you have changed all of the set values in the BIOS setup, you should save your chnages and  
exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.  
Exit Saving Changes  
Exit Discarding Changes  
Load Settup Default  
Discard Change  
Save Changes  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BIOS Setup  
Exit Saving Changes  
This option allows user to exit system setup with saving the changes.  
Press <Enter> on this item to ask for the following confirmation message:  
Pressing ‘Y’ to store all the present setting values tha user made in this time into CMOS.  
Therefore, whenyou boot up your computer next time, the BIOS will  
re-configure your system according data in CMOS.  
SetupConfirmation  
Save configuration changes and exit now?  
[Yes]  
[No]  
ExitDiscarding Changes  
This option allows user to exit system setup without changing any  
previous settings values in CMOS. The previous selection remain in effect.  
This will exit the Setup Utility and restart your compuetr when selecting this option.  
Press <Enter> on this item to ask for confirmation message.  
SetupWarning  
Configuration has hot been saved!  
Save before exiting  
[Yes]  
[No]  
Load SettupDefault  
This option allows user to load default values for all setup items.  
When you press <Enter> on this item, you will get a confirmation dialog box with a message  
as below:  
SetupConfirmation  
Load default configuratin now?  
[Yes]  
[No]  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Discard Changes  
This option allows user to load previos values from CMOS for all setup item.  
When you press <Enter> on this item, you will get a confirmation dialog box with a message  
as below:  
Setup Confirmation  
Load previous configuration now?  
[Yes]  
[No]  
Save Changes  
This option allows user to save setup dat ato CMOS.  
When you press <Enter> on this item, you will get a confirmation dialog box with a message  
as below:  
Setup Confirmation  
Save configuration changes now?  
[Yes]  
[No]  
Press [Yes] to save setup daya to CMOS.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appexdix  
Chapter 6 Appendix  
6-1: Acronyms  
Acronyms  
ACPI  
APM  
AGP  
Meaning  
Advanced Configuration and Power Interface  
Advanced Power Management  
Accelerated Graphics Port  
Audio Modem Riser  
AMR  
ACR  
Advanced Communications Riser  
BIOS Boot Specification  
Basic Input / Output System  
Central Processing Unit  
BBS  
BIOS  
CPU  
CMOS  
CRIMM  
CNR  
DMA  
DMI  
Complementary Metal Oxide Semiconductor  
Continuity RIMM  
Communication and Networking Riser  
Direct Memory Access  
DesktopManagementInterface  
Dual Inline Memory Module  
DualRetentionMechanism  
Dynamic Random Access Memory  
DoubleDataRate  
DIMM  
DRM  
DRAM  
DDR  
ECP  
Extended Capabilities Port  
Extended System Configuration Data  
Error Checking and Correcting  
ElectromagneticCompatibility  
Enhanced Parallel Port  
ESCD  
ECC  
EMC  
EPP  
ESD  
ElectrostaticDischarge  
FDD  
Floppy Disk Device  
FSB  
Front Side Bus  
HDD  
IDE  
Hard Disk Device  
IntegratedDualChannelEnhanced  
InterruptRequest  
IRQ  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GS-SR195V Rack Mount Server  
Acronyms  
I/O  
Meaning  
Input / Output  
IOAPIC  
ISA  
InputOutputAdvanced Programmable Input Controller  
IndustryStandardArchitecture  
LocalArea Network  
LAN  
LBA  
Logical BlockAddressing  
LightEmittingDiode  
LED  
MHz  
MIDI  
MTH  
MPT  
NIC  
Megahertz  
Musical Instrument Digital Interface  
Memory Translator Hub  
Memory Protocol Translator  
Network Interface Card  
Operating System  
OS  
OEM  
PAC  
POST  
PCI  
OriginalEquipmentManufacturer  
PCI A.G.P. Controller  
Power-On Self Test  
PeripheralComponentInterconnect  
Rambus in-line Memory Module  
Special Circumstance Instructions  
Single Edge Contact Cartridge  
Static Random Access Memory  
Symmetric Multi-Processing  
SystemManagementInterrupt  
Universal Serial Bus  
RIMM  
SCI  
SECC  
SRAM  
SMP  
SMI  
USB  
VID  
Voltage ID  
ZCR  
Zero Channel RAID  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Speaker P142 User Manual
Insignia Flat Panel Television NS 42 User Manual
JVC Car Stereo System GET0143 001A User Manual
JVC CD Player LVT1134 001A User Manual
JVC Laptop MP XP3210GB User Manual
JVC Universal Remote HR DVS3EU User Manual
Kawasaki Utility Trailer ZX 9R User Manual
King Canada Saw KC 10DS User Manual
KitchenAid Oven YKERS205TS User Manual
Konica Minolta Printer FAX2900 FAX3900 User Manual