Intel Network Card M0344 ND User Manual

Video Input Daughtercard  
The Video Input Daughter Card from Altera enables composite video to be interfaced with Altera’s or third  
party partner FPGA development board equipped with a standard expansion connector. It is ideal for  
developing applications with the Video and Image Processing Solutions that need to perform any image  
processing. The daughter card is included as part of the Video Development Kit, Cyclone II Edition and it  
can be purchased as a separate item.  
®
Nios II Development Kit,  
Cyclone II Edition  
Features: • 2 Composite Video Input Channels using the Texas Instruments (TI) TVP5146 ADC • Support  
for NTSC/PAL • 10-bit BT.656 Output • Compatibility with expansion connector, standard on most Altera  
development kits  
Altera’s Nios II Development Kit, Cyclone II Edition provides everything needed for system-on-a-program-  
mable-chip (SOPC) development. Based on Altera’s Nios II family of embedded processors and the low cost  
Cyclone II EP2C35 device, this development kit provides an ideal environment for developing and proto-  
typing a wide range of price sensitive embedded applications.  
544-1704-ND (DK-VIDEO-TVP5146N) ................................................................. $210.41  
Kit Includes:  
Nios II family of embedded processors • Nios II development tools, including: • Nios II integrated  
development environment (IDE) and debugger • GNU tools • Nios II instruction set simulator (ISS)  
MicroC/OS-II real-time operating system with development license LightweightIP TCP/IP stack  
• Quartus II design software, including the SOPC Builder system development tool • Library  
of standard microprocessor peripherals • RoHS-Compliant development board: • Cyclone II  
EP2C35F672 device • MAX EPM7128AE CPLD configuration control logic • 1-Mbyte synchronous  
SRAM • 16-Mbyte DDR SDRAM • 16-Mbyte flash memory • EPCS64 serial configuration device (64 Mbit)  
• CompactFlash connector header for Type I CompactFlash cards (40 available) • 10/100 Ethernet physical  
layer/media access control (PHY/MAC) • Ethernet connector (RJ-45) • One serial connector (RS-232 DB9  
port) • Two expansion/prototype headers (2 x 41 available user I/O pins) • JTAG connectors for FPGA and  
CPLD • Mictor trace/debug connector • One set PMC headers (32-bit) • Four user-defined push-button  
switches • Eight user-defined LEDs • Dual 7-segment LED display • Power-on reset circuitry Cables  
and accessories: • USB-Blaster Rev B download cable • Serial cable (RS-232) • 9-V power supply • Inter-  
national power cords • LCD module • Ethernet (RJ45) cable (7 feet) • Ethernet crossover adapter Many  
hardware and software reference designs targeted to the Nios development board Cyclone II edition  
• One-year subscription to Nios II processor-related tool upgrades • There are no license or royalty  
fees connected with the Nios II development kit used to develop with Altera FPGA’s and HardCopy  
series structured ASICs • Coupon for a 20% discount on any one instructor-led Altera Technical  
Training course scheduled in North America  
PCI Development Kit  
with Cyclone II  
The Cyclone II EP2C35 PCI Express Development Board provides a hardware platform for developing and  
prototyping PCI Express, DDR2 SDRAM, and the 10/100/1,000 Ethernet interface. Based on Cyclone II  
FPGAs and using Altera MegaCore functions or your own IP, Cyclone II EP2C35 PCI Express Development  
Board allows users to quickly solve design problems that typically require time-consuming and custom  
solutions.  
649-1001-ND (KS-ALT-2C35-30) ...................................................................... $1618.50  
C
DE2 Development and  
NEW!  
Education Board  
544-1698-ND (DK-NIOS-2C35N) ...................................................................... $1073.61  
Specifications: FPGA: • Cyclone II  
EP2C35F672C6 FPGA and EPCS16  
®
serial configuration device I/O Devices:  
Nios II Embedded Evaluation Kit,  
• Built-in USB Blaster for FPGA configuration • 10/100  
Ethernet, RS-232, Infrared port • Video Out (VGA 10-bit  
DAC) • Video In (NTSC/PAL/Multi-format) • USB 2.0  
(type A and type B) • PS/2 mouse or keyboard port  
• Line-in, Line-out, microphone-in (24-bit audio CODEC)  
• Expansion headers (76 signal pins) Memory: • 8MB  
SDRAM, 512KB SRAM, 4MB Flash • SD memory card  
slot Switches, LEDs, Displays and Clocks: • 18 toggle  
switches • 4 debounced pushbutton switches • 18 red  
LEDs, 9 green LEDs • Eight 7-segment displays • 16 x  
2 LCD display • 27MHz and 50MHz oscillators, external  
SMA clock input  
Cyclone III Edition  
The Nios II Embedded Evaluation Kit, Cyclone III Edition, is a first class, low cost evaluation platform for  
embedded developers. Software developers, especially those new to FPGA design, can install and evaluate  
the Nios II Embedded Design Suite (EDS) - a comprehensive software development suite for embedded  
applications - all at no cost. The included software tutorials and examples come with full source code  
showing applications such as Picture Viewer, Web Server, C-to-Hardware (C2H) acceleration and graphics.  
Kit Includes:  
CYCLONE III STARTER BOARD: Cyclone III EP3C25F324 FPGA Configuration: Embedded USB-  
Blaster™ circuitry (includes an Altera EPM3128A CPLD) allowing download of FPGA configuration files  
via the user’s USB port Power and analog devices from Linear Technology: • Switching power supply  
LTM4603EV-1 • Switching and step-down regulators LTC3413, LT1959 Memory: • 32 Mbytes of DDR  
SDRAM • 1Mbyte of Synchronous SRAM • 16Mbytes of Intel P30/P33 flash Clocking: 50 MHz on-board  
oscillator • Switches and indicators: • Six push buttons total, four user controlled • Seven LEDs total,  
four user controlled LCD DAUGHTER CARD: Color LCD touch-screen display: 800 x 480 resolution  
24-bit CD quality Audio CODEC with line-in, line-out, and microphone-in jacks 10/100 Ethernet  
physical layer/media access control (PHY/MAC) Connectors: • VGA output • Composite TV-in  
• Audio-out, audio-in, and microphone-in • Secure digital (SD) card • Serial connector (RS-232 DB9 port)  
• PS/2 • Ethernet connector (RJ-45) NIOS II EVALUATION KIT CD-ROM: Example applications:  
• Application selector • Picture viewer • Mandelbrot acceleration with the Nios C2H compiler • Web server/  
Remote FPGA configuration Hardware tutorials: • Create an FPGA design in one hour • Build a 32-bit  
soft processer system inside an FPGA Software tutorials: My First Software Application Complete  
documentation: • Quick start guide • User guide • Reference manual • Board schematic, layout, and bill  
of materials • Product and partner information CABLES AND ACCESSORIES • 128-Mbyte SD card and  
USB-to-SD card adapter • USB cable • 9V power supply • International power cords • Ethernet (RJ-45)  
P0301-ND  
(P0301)................................................................................... $534.11  
Note: Academic pricing available; call Digi-Key for pricing.  
DE2-70 Development and  
Education Board  
®
Includes: • Altera Cyclone II 2C70 FPGA device  
• Altera Serial Confi g urations device EPCS16 • USB  
Blaster (on board) for programming and user API control;  
both JTAG and Active Serial (AS) programming modes  
are supported • 2-Mbyte SSRAM • Two 32-Mbyte  
®
cable (7 ft.) • Ethernet crossover adapter ALTERA COMPLETE DESIGN SUITE DVD (Free): • Quartus  
SDRAM • 8-Mbyte Flash memory • SD Card socket  
®
II Web Edition (FPGA design software) • ModelSim Altera Web Edition (FPGA simulation software from  
ModelSim) • Nios II Embedded Design Suite (32-bit microprocessor software) • MicroC/OS-II real-time  
operating system evaluation • Nios II C-to-Hardware acceleration compiler evaluation • NicheStack TCP/IP  
• 4 pushbutton switches • 18 toggle switches • 18 red  
user LEDs • 9 green user LEDs • 50MHz oscillator and  
28.63MHz oscillator for clock sources • 24-bit CD-quality  
®
Network Stack - Nios II Edition evaluation • MegaCore IP Library (Library of intellectual property cores)  
audio CODEC with line-in, line-out and microphone-  
544-2411-ND (DK-N2EVAL-3C25N-OB) ............................................................... $484.47  
in jacks • VGA DAC (10-bit high-speed triple DACs)  
with VGA-out connector • 2 TV Decoder (NTSC/PAL/  
SECAM) and TV-in connector • 10/100 Ethernet Controller with a connector • USB Host/Slave Controller  
with USB type A and type B connectors • RS-232 transceiver and 9-pin connector • PS/2 mouse/keyboard  
connector • IrDA transceiver • 1 SMA connector • Two 40-pin Expansion Headers with diode protection  
DSP Development Kit,  
P0304-ND  
(P0304)................................................................................... $646.32  
Note: Academic pricing available; call Digi-Key for pricing.  
Cyclone II Edition  
The DSP Development Kit, Cyclone II Edition provides everything you need to develop complete system-on-  
a-programmable-chip (SOPC) solutions.  
Kit Includes:  
DE1 Development and Education Board  
• Cyclone II DSP Development Board with and EP2C70 device • DSP Development Kit, Cyclone II Edition  
Version 6.0.1 CD-ROM • DSP Builder Version 6.0.1 CD-ROM • The MathWorks MATLAB and Simulink  
CD-ROM Release 2006a (2006a) • Quartus II Software Development Kit Edition (DKE) version 6.0 SP1  
CD-ROM • Nios II Embedded Processor Windows Evaluation Edition version 6.0.1 CD-ROM • IP MegaCore  
Library version 6.0.1 CD-ROM • SLP-50 anti-aliasing filter from Mini-Circuits • SMA Cable • USB-Blaster  
download cable and USB cable • Power supply and adapters for North America/Japan, Europe and the  
United Kingdom • Quartus II Design Software Installation and Licensing for PCs manual  
Specifications: FPGA: Cyclone II  
EP2C20F484C7 FPGA and EPCS4 serial  
confi g uration device I/O Devices: • Built-in  
USB Blaster for FPGA configuration RS-232 port • VGA DAC  
resistor network (4096 colors) • PS/2 mouse or keyboard  
port • Line-in, Line-out, microphone-in (24-bit audio CODEC)  
• Expansion headers (76 signal pins) Memory: • 8-MB  
SDRAM, 512KB SRAM, 4MB Flash • SD memory card slot  
Switches, LEDs, Displays and Clocks: • 10 toggle switches  
• 4 debounced pushbutton switches • 10 red LEDs, 8 green  
LEDs • Four 7-segment displays • 27MHz and 50MHz  
oscillators, external SMA clock input  
544-1699-ND (DK-DSP-2C70N) ....................................................................... $1073.61  
Video Development Kit,  
Cyclone II Edition  
P0528-ND  
(P0528)................................................................................... $171.97  
The Video Development Kit, Cyclone II Edition, featuring the Texas Instruments (TI) TVP5146 Family of  
video analog-to-digital (A/D) converters, delivers a complete development environment for digital video and  
image processing. The kit facilitates the entire design process from design conception through hardware  
implementation. The Video Development Kit, Cyclone II Edition includes the Cyclone II DSP development  
board, Altera’s video input daughter card, DSP Builder development tool, Quartus II development software,  
evaluation intellectual property (IP) cores, system reference designs and labs, as well as power supplies,  
cables and documentation.  
Digital Development Kits and Sensor  
P0424-ND: The TRDB_LCM Kit provides everything you need to develop applications using  
a digital panel on the Altera DE2 board and Altera Cyclone II FPGA Starter Development  
Kit (CII Starter Kit). Kit Includes: • Complete reference designs and source code for  
implementing a TV player or a Color Pattern Generator using TRDB_LCM and Altera DE2/CII Starter Kits.  
P0307-ND: The 4.3” Ultra-high Resolution LCD Touch Panel Development Kit provides users an 800 x 480  
full-color high-quality LCD Touch Panel with complete reference designs with source code to allow users  
to develop applications using a touch panel on the Altera DE2-70/DE2/DE1 boards and Altera Cyclone II/  
Cyclone III Starter Kits.  
Kit Includes:  
Cyclone II EP2C70 DSP development board: Cyclone II EP2C70F672C6 device Video input daughter  
card: • Composite video input channels TI TVP5146 (Supports NTSC/PAl, 10-bit BT.656 output) Analog  
I/O: • Two 14-bit, 125-MSPS analog-to-digital (A/D) converter - TI ADS5500 • Two 14-bit 165-MSPS  
digital-to-analog (D/A) converter - TI DAC904 • VGA digital-to-analog converter (D/A) • Stereo audio  
coder/decoder (CODEC), 96kHz Digital I/O: • EMIF connector for TI’s C6000 DSP Starter Kit (DSK) to  
enable peripheral expansion and FPGA co-processing • MICTOR connector for Agilent and Tektronix logic  
analyzers • Expansion prototyping connector Memory: • 256-Mbyte DDR2 DIMM • 1-Mbyte synchronous  
SRAM • Two EPCS64 devices MATLAB/Simulink Evaluation Software DSP Builder development  
tool Quartus II DKE • Evaluation IP cores • System reference designs and labs: • Video and image  
processing reference design • DSP Builder filtering design • DSP Builder/SOPC Builder image processing  
reference design • Fast Fourier transform (FFT) coprocessor reference design for TI’s TMS320C6416DSK  
• Nios II reference designs • DDR2 DIMM reference design Cables and accessories: • USB-Blaster  
download cable • Power supply • International power cords  
P0349-ND: The TRDB_DC2 1.3 Mega Pixel Digital Camera module that provides everything you need  
to build a 1.3 Mega Pixel Digital Camera on the Altera DE2/DE1 board and CII Starter Kit. Kit Includes:  
• TRDB_DC2: 1.3 Mega Pixel Daughter card • Complete reference design with source code in Verilog  
• User Manual with Live Demo examples Note: Must use M0344-ND with this module.  
M0344-ND: This CMOS Sensor is to be used with P0349-ND.  
P0424-ND  
P0307-ND  
P0349-ND  
M0344-ND  
(P0424) 3.6 Inch Digital Panel Development Kit........................................ $106.82  
(P0307) 4.3 Inch Digital Touch Panel Development Kit ................................ $183.43  
(P0349) 1.3 Mega Pixel Digital Camera Development Kit................................$75.53  
(M0344) Sensor for use with P0349-ND ..................................................$21.58  
544-1703-ND (DK-VIDEO-2C70N) .................................................................... $1181.51  
All prices in Canadian dollars and include duty and brokerage fees.  
598 (C083)  
1-800-344-4539 • ca.digikey.com • 218-681-6674 • Fax: 218-681-3380  
Download from Www.Somanuals.com. All Manuals Search And Download.  

InFocus Projector RS 232 User Manual
IOGear Switch GCS62HU User Manual
Jenn Air Double Oven W27400 User Manual
JVC Projector DLA M20U User Manual
Kalorik Coffeemaker USK CM 23826 User Manual
Karcher Pressure Washer K205 M Plus User Manual
Kenko SONAR KFM 2100 User Manual
Kidde Smoke Alarm PI2000CA User Manual
KitchenAid Ice Maker KSBP25FK User Manual
Konica Minolta Copier 7272 User Manual