Intel Computer Hardware XP P5IM800GV User Manual

XP-P5IM800GV  
Intel® Pentium® 4 LGA775 Processor Motherboard  
User's Manual  
M-050401  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Motherboard Layout ........................................................................4  
1. Product Introduction..................................................................5  
1.1.  
1.2.  
Feature Summary.............................................................................. 5  
I/O Back Panel and Connectors&Jumper Setting............................. 6  
1.2.1. I/O Back Panel ...................................................................................... 6  
1.2.2. Connectors&Jumper Setting ................................................................ 6  
2. Hardware Installation ................................................................9  
2.1.  
Installation of a LGA775 Pentium 4 CPU and Fan Sink ................. 10  
2.1.1. Installation of a LGA775 CPU ............................................................ 10  
2.1.2. Installation of Fan Sink ....................................................................... 10  
2.2.  
2.3.  
2.4.  
Installation of Memory ......................................................................11  
Installation of the Graphics Card ..................................................... 12  
What is Axper's A.G.U.? .................................................................. 12  
2.4.1. Graphics Card Support List ................................................................ 12  
3. BIOS Setup ............................................................................15  
3.1.  
3.2.  
3.3.  
3.4.  
3.5.  
3.6.  
3.7.  
3.8.  
3.9.  
Setup Screen Features (BIOS version: F3) .................................... 15  
Standard CMOS Features............................................................... 16  
Advanced BIOS Features ............................................................... 18  
Integrated Peripherals ..................................................................... 19  
Power Management Setup.............................................................. 21  
PnP/PCI Configuration .................................................................... 22  
PC Health Status............................................................................. 23  
Frequency/Voltage Control.............................................................. 24  
Load Fail-Safe Defaults................................................................... 25  
3.10. Load Optimized Defaults ................................................................. 25  
3.11. Set User Password.......................................................................... 25  
3.12. Save & Exit Setup............................................................................ 25  
3.13. Exit Without Saving ......................................................................... 25  
4. Driver Installation ....................................................................26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Motherboard Layout  
ATX_12V  
KB_MS  
CPU_FAN  
LGA775  
ATX  
SmSC  
LPC47M997-NR  
R_USB  
AUDIO  
Intel 865GV  
AGU  
F_AUDIO  
PCI1  
SATA1  
RTL8100C  
CLR_CMOS  
ICH5  
PCI2  
PCI3  
SATA0  
BAT  
CODEC  
CD_IN  
PWR_LED  
F_USB1  
BIOS  
SYS_FAN  
FDD  
F_PANEL  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
Product Introduction  
The user manual provides steps related to quick installation. If you wish to view complete  
product information, please select the " ",Open User Manual button located on the driver  
1.1.  
Feature Summary  
CPU  
LGA775 for Intel® Pentium® 4 Processor  
Intel® Pentium® 4 533/800MHz FSB  
L2 cache depends on CPU  
Chipset  
Memory  
North Bridge: Intel® 865GV  
South Bridge: Intel® ICH5  
2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max)  
Supports dual channel DDR400/DDR333 DIMM  
Supports only 2.5V DDR SDRAM  
Slots  
1 AGU slot device support  
3 PCI slots support 33MHz & PCI 2.2 compliant  
2 IDE controller provide IDE HDD/CD-ROM(IDE1, IDE2) with PIO,  
Bus Master (Ultra DMA33/ATA66/ATA100) operation modes  
Can connect up to 4 IDE devices  
On-Board IDE  
On-Board Floppy  
On-Board SATA  
1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and  
2.88M bytes  
2 Serial ATA ports  
On-Board Peripherals 1 Parallel port supports Normal/EPP/ECP mode  
1 Serial port (COMA), 1 VGA port  
6 USB 2.0/1.1 ports (4 x Rear, 2 x Front by cable)  
1 Front Audio connector  
1 PS/2 Keyboard  
1 PS/2 Mouse  
On-Board LAN  
Built-in RTL8100C chipset  
1 RJ45 port  
On-Board VGA  
Built-in Intel® 865GV chipset  
ALC655 CODEC  
On-Board Sound  
Supports 2/4/6 channel  
Line Out / Line In / Mic In  
CD In  
BIOS  
Licensed AWARD BIOS  
Supports BIOSNow!  
I/O Control  
SmSc LPC47M997-NR  
CPU/System Fan Revolution detect  
CPU/System temperature detect  
System Voltage detect  
Micro ATX size form factor, 24.4cm x 21cm  
Hardware Monitor  
Form Factor  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2.  
I/O Back Panel and Connectors&Jumper Setting  
I/O Back Panel  
1.2.1.  
Parallel Port  
LAN  
PS/2 Mouse  
Line In  
Line Out  
MIC In  
USB  
PS/2 Keyboard  
PS/2 Keyboard  
COMA  
VGA  
USB  
Connects PS/2 standard keyboard and PS/2 standard  
mouse  
PS/2 Mouse connector  
Parallel port (LPT)  
COMA (Serial port)  
VGA port  
Connects to printer  
Connects to serial-based mouse or data processing devices  
Connects to 15pin D-Sub device such as a monitor  
Prior to use, please make sure that your system as well  
as the connected attachments support the USB interface.  
If driver installation is required, please consult the USB  
section of the user manual.  
USB  
(Universal Serial Bus Port)  
LAN (RJ45 LAN Port)  
Line In  
Internet connection with speed of up to10/100Mbps  
Connects to optical devices, CD players and other audio  
input devices  
LineOut  
Mic In  
Connects to speakers or headphones  
Connects to microphone  
1.2.2.  
Connectors&Jumper Setting  
FDD (Floppy Disk Drive Connector)  
The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one  
edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the  
connector.  
2
34  
1
33  
IDE1 / IDE2 (IDE1 and IDE2 Connector)  
The IDE connector is able to connect two IDE devices via an IDE cable and requires checking  
of the IDE jumper setting. It is recommended that the hard drive be connected to the first IDE  
connector while the optical drive be connected to the second IDE connector.  
2
40  
1
39  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
CPU_FAN (CPU Fan Power Connector); SYS_FAN (System Fan Power Connector)  
The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(only for CPU_FAN)  
power connector and possesses a ful-proof connection design.  
Most coolers are designed with color-coded power connector wires. A red power connector wire indi-  
cates a positive connection and requires a +12V power voltage. The black connector wire is the  
ground wire (GND).  
Please remember to connect the power to the cooler to prevent system overheating and failure.  
Caution!  
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.  
PIN  
SIGNAL  
1
GND  
1
1
2
+12V  
CPU_FAN  
SYS_FAN  
3
Sense  
4
Speed Control (Only for CPU_FAN)  
ATX_12V (+12V Power Connector)  
The ATX_12V power connector provides power to the CPU. If this connector is not Attached,  
the system will not start.  
PIN  
1
SIGNAL  
GND  
4
2
2
GND  
3
+12V  
+12V  
3
1
4
ATX (ATX Power Connector)  
The ATX power connector provides power to the motherboard. Prior to connection, please  
make sure that the power supply is disconnected.  
PIN  
1
SIGNAL  
PIN  
11  
SIGNAL  
3.3V  
3.3V  
10  
20  
2
3.3V  
12  
13  
14  
15  
16  
17  
18  
19  
20  
-12V  
3
GND  
GND  
4
VCC  
PS_ON (soft on/off)  
5
GND  
GND  
GND  
GND  
-5V  
6
VCC  
7
GND  
8
Power Good  
5VSB (stand by +5V)  
+12V  
11  
1
9
VCC  
VCC  
10  
F_PANEL (Front Panel Control Connector)  
The F_Panel Control Connector connects to certain connectors on the front panel of the  
system casing such as IDE Hard Disk Active LED, speaker, reset, and power on/off connectors.  
You can use the schematic diagram below as the basis for connection.  
PIN  
HD  
SIGNAL  
IDE Hard Disk Active LED  
Speaker Connector  
Reset Switch  
SPK  
RES  
PW  
2
1
20  
19  
Soft Power Connector  
Message LED/Power/Sleep LED  
NC  
MSG  
NC  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PWR_LED  
Connects to the system power LED indicator whereby the power is indicated as ON or OFF.  
However, the indicator will flash when the system is suspended.  
PIN  
1
SIGNAL  
MPD+  
MPD-  
1
2
3
MPD-  
SATA0/SATA1 (Serial ATA Connector, controlled by ICH5)  
The SATA0/1 connector is able to connect a single Serial ATA device via a SATA cable.  
For the connected SATA hard disk to work correctly, please check the related BIOS setting  
and install proper driver for the SATA controller.  
PIN  
1
SIGNAL  
GND  
TXP  
PIN  
5
SIGNAL  
RXN  
2
1
6
RXP  
7
3
TXN  
7
GND  
4
GND  
F_AUDIO (Front Audio Connector)  
Connects to the audio connector located on the front panel of the system casing  
(dependent on case design). When use of the front panel audio connector is required,  
please remove the 5-6 pin, 9-10pin jumper.  
Please note that use of only the front panel audio connector or the rear panel audio connector  
is permitted.  
PIN  
1
SIGNAL  
MIC  
PIN  
6
SIGNAL  
Rear Audio (R)  
Reserved  
9
1
2
GND  
7
3
MIC_BIAS  
POWER  
Front Audio (R)  
8
NO PIN  
10  
2
4
9
Front Audio (L)  
Rear Audio (L)  
5
10  
CD_IN (Optical Drive Audio Connector)  
Connects CD-ROM or DVD-ROM audio connector.  
PIN  
1
SIGNAL  
CD_L  
GND  
1
2
3
GND  
4
CD_R  
F_USB1 (Front USB Connector)  
Connects to the USB connector located on the front panel of the system casing (dependent on  
case design). Note: Please make sure that each USB connection matches its designated  
position. If connections are made incorrectly, the result can lead to inability to use the function  
or even damage.  
PIN  
6
SIGNAL  
USB Dy+  
GND  
PIN  
1
SIGNAL  
POWER  
POWER  
USB Dx-  
USB Dy-  
USB Dx+  
2
7
2
1
10  
9
8
GND  
3
9
NO PIN  
NC  
4
10  
5
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLR_CMOS (Clear CMOS)  
You can clear the motherboard CMOS with the jumper to return your system to its initial  
status. To prevent improper usage, the jumper does not include the jumper plug. If you wish  
to use the Clear CMOS function, please short circuit the 1-2 Pin.  
Open : Normal  
Short : Clear CMOS  
1
1
BAT(Battery)  
The improper removal of the battery can result in harm. When replacing a  
battery, please make sure you use one that is of similar brand and model  
number.  
For information related to battery specifications and precautions, please refer  
to the manufacturer instructions.  
If you wish to delete the data stored in the CMOS, please follow the steps  
below:  
1. Please turn off your computer and unplug the power.  
2. Remove the battery from the motherboard.  
3. Wait 10 minutes and then replace the battery onto the motherboard.  
4. Plug in the power supply and turn on your system.  
2.  
Hardware Installation  
1. Please make sure that the CPU used is supported by your motherboard.  
2. Please be aware of the placement position of the CPU. If the CPU does not  
insert properly, do not apply force but check the placement position.  
3. Please make sure that an even layer of heat sink paste is added between the  
CPU and the fan sink.  
4. Please do not turn on the power prior to installing the fan sink. Doing so can  
result in overheating and lead to permanent damage to the CPU.  
5. Please follow the CPU specifications when setting the frequency. It is not  
recommended that system speed settings exceed that of hardware  
specifications. If you wish to set your system speed to exceed the recom  
mended specifications, please check your hardware specifications eg: CPU,  
graphics card, memory, hard drive  
The following must be supported to allow the use of Hyper-Threading Technology:  
- an Intel Pentium 4 CPU with HT  
- a motherboard supporting HT  
- HT selection feature within BIOS  
- an operating system supporting HT  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.1.  
Installation of a LGA775 Pentium 4 CPU and Fan Sink  
Installation of a LGA775 CPU  
2.1.1.  
1. Push the socket lever arm down and away from the CPU  
socket and raise it up completely.  
2. Open the load plate and gently remove the plastic cover.  
3. Hold the CPU with your thumb and index fingers (do not  
touch the bottom of the CPU when holding it).  
Align notchs on the two sides of the CPU with the small  
sockets of the CPU socket and place the CPU straight  
down.  
4. Make sure the CPU is properly installed and then close  
the load plate. Lower the socket lever and engage it to  
lock the CPU in place.  
2.1.2.  
Installation of Fan Sink  
1. Apply a thin coating of thermal paste to complete cover  
the surface of the CPU.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Align the four fasteners of the fan sink with the four holes  
around the CPU socket. Push down each fastener and  
you should hear a "click" when the fastener is attached.  
Make sure the four fasteners are attached securely.  
Prior to installation of the fan sink, check the direction of  
each fastener by the arrow engraved on fastener top.  
Before attaching the fasteners, turn each fastener  
clockwise. To uninstall the fan sink, release each fastener  
by rotating the fastener along the direction of the arrows  
and pull them up.  
3. Connect the 4-wire power cable of the fan sink to the  
CPU_FAN header on the motherboard to complete the  
installation.  
2.2.  
Installation of Memory  
1. Before installing or removing memory, please make sure that the computer power  
is turned off to prevent hardware damage.  
2. Please make sure that the memory used is supported by the motherboard.  
3. Memory modules have a foolproof insertion design. The memory can be in  
stalled only when facing the correct position. If you cannot insert the module,  
please switch directions.  
4. It is recommended that memory of similar capacity, specifications and brand be  
used.  
The motherboard supports DIMM memory modules, whereby BIOS will automatically detect  
memory capacity and specifications. Memory modules are designed so that they can be  
inserted only in one direction.  
1. Unfasten the clips on each end of the memory slots.  
Correctly align the memory module in the slot and  
push downwards..  
2. Once the memory module is correctly inserted, the  
clips will automatically refasten. If the memory  
module is positioned in the wrong direction, it will  
not insert. If this occurs, please switch directions.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.3.  
Installation of the Graphics Card  
1. Before installing the graphics card, please carefully read the accompanying user manual.  
As well, make sure the computer power is turned off.  
2. When installing or removing the graphics card, first pull out the white AGU knob before  
insertion or removal. Releasing the AGU knob will hold the graphics card firmly in place.  
2.4.  
What is Axper's A.G.U.?  
Axper's Advanced Graphics Upgrade (A.G.U.) is a unique feature on 865GV motherboards  
that includes an added AGP graphics interface. Axper's A.G.U. allows the addition of a  
graphics card for high-performance graphics for multimedia and gaming applications. Axper's  
A.G.U. is both AGP 4X and 8X compatible and supports the new Microsoft DirectX 9.0 standard.  
The Advantages of Axper's A.G.U.  
1) Performance  
Axper's 865GV motherboards offers better graphics output than other 865GV platforms due to  
the extra addition of a dedicated AGP graphics interface  
2) Flexibility  
With the Axper A.G.U., users have the flexibility in choice of a wide range of AGP4X and  
AGP8X-based graphics cards (please refer to support list on manual or website) for their  
865GV chipset platforms.  
3) Value  
Axper's 865GV motherboards provide superior value by offering performance nearing to that  
of 865G chipset platforms but at a noticeably lower cost for great performance at  
unbelievable savings!  
2.4.1.  
Graphics Card Support List  
(The items below are all supported under the Windows XP operating system. When  
using an add-on graphics card, please first delete the onboard graphics driver  
before installing the driver for the add-on graphics card.)  
Figure 1-1. 4X AGP Card  
Graphics Chip  
Nvidia  
Maker  
Model Name  
GV-GF2010D  
GV-GF3000D  
GV-GF1280T-32P  
GV-GF3500TF-GH  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
To be continued...  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 1-2. 4X AGP Card  
Graphics Chip  
Nvidia  
Maker  
ELSA  
Model Name  
Gladiac 517  
ELSA  
ELSA  
Gladiac 517vivo  
Gladiac 525 A128  
WinFast A170 TH  
WinFast A250 TO  
WinFast A250 Ultra  
GV-AR64S-H  
GV-AP128DG-H  
GV-AF128D-GH  
GV-AV32S  
Leadtek  
Leadtek  
Leadtek  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
ATi  
GV-AV64S  
Figure 2. 8X AGP Card  
Graphics Chip  
Nvidia  
Maker  
Model Name  
GV-N4464D  
GV-N4064T  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
ASUS  
GV-N52128DE  
GV-N55128DP  
GV-N57L128D  
GV-N57128DE  
GV-N57128DP  
GV-N59X128D  
GV-N68128DH  
GV-N68T256D  
GV-N68U256D  
V9480-TVD  
MSI  
MSI  
MX440-VTD8X MS-8888  
Ti4600-TD-8X  
WinFast A280LE TD  
WinFast A310 TD  
Gigi  
GV-R9700  
GV-R9500  
GV-R98P128D  
GV-R7064T  
GV-R92S64T  
GV-R92128TE  
GV-R92128DH  
GV-R925128D  
GV-R98X256D  
Xabre Pro  
Leadtek  
Leadtek  
Albatron  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Gigabyte  
Triplex  
ATi  
SiS  
Power Color  
Xabre 600 Pro  
For the most up-to-date information related to graphics card support, please link to our  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.  
BIOS Setup  
BIOS (Basic Input and Output System) stores all the information of the motherboard settings  
that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user  
to make changes in BIOS configurations that are required or to activate certain features.  
The CMOS SETUP saves each item configuration in the CMOS SRAM of the motherboard.  
When the power is turned off, the battery on the motherboard supplies the required power to  
the CMOS SRAM.  
When the power is turned on, pushing the <Del> button during the BIOS POST (Power-On  
Self Test) will bring up the CMOS SETUP screen. If you wish to enter the BIOS setup, please  
press "Ctrl + F1" at the BIOS setup screen.  
When using BIOS setup for the first time, it is recommended that you save the present BIOS  
onto a disk in case you need to reset the BIOS back to its original settings. If you wish to  
update to a new BIOS, the "BIOSNow!" can be used.  
The user can select "BIOSNow!" as a way to quickly and easily update or back up BIOS  
without entering the operating system.  
3.1.  
Setup Screen Features (BIOS version: F3)  
ø
When you enter the CMOS SETUP screen, you will see the following screen and setting  
selections as shown below.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI Configurations  
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Save & Exit Setup  
Exit Without Saving  
Frequency/Voltage Control  
ESC: Quit  
F8: BIOSNow!  
higf: Select Item  
F10: Save & Exit Setup  
Time, Date, Hard Disk Type...  
Instructions  
< , ,  
,
,Enter>  
Movement in all four directions to highlight a desired option,  
pressing <Enter> will select the option and take you to its  
appropriate screen  
<Page Up,Page Down>  
Used to toggle up and down the available options for a  
particular item, whereby <Page Up> can also be used to  
increase value option and <Page Down> to decrease  
value option  
<Esc>  
<F1>  
<F2>  
<F5>  
Return to main setup screen or exit setup  
Gives the list of options available for each item  
Gives the list of options available for the current item  
Returns settings to previous values (not applicable to main setup  
screen)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
<F6>  
<F7>  
Gives the list of options available for each item  
Return to Optimized default values (not applicable to main  
setup screen)  
<F8>  
<F9>  
<F10>  
Enters Expert-Flash feature  
Displays system information  
Saves settings and exits setup  
3.2.  
Standard CMOS Features  
ø
Includes the settings for items such as date, time, floppy disk drive specifications, and  
hard drives connected to the IDE interface.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
Standard CMOS Features  
Mon, Apr, 18 2005  
11:20:24  
Date (mm:dd:yy)  
Time (hh:mm:ss)  
Item Help  
Menu Level}  
Change the day, month,  
}
}
}
}
}
}
IDE Channel 0 Master  
IDE Channel 0 Slave  
IDE Channel 1 Master  
IDE Channel 1 Slave  
IDE Channel 2 Master  
IDE Channel 3 Master  
[None]  
[None]  
[None]  
[None]  
[None]  
[None]  
year  
<Week>  
Sun. to Sat.  
<Month>  
Jan. to Dec.  
Drive A  
Drive B  
[1.44M, 3.5"]  
[None]  
<Day>  
Floppy 3 Mode Suport  
[Disabled]  
1 to 31 (or maximum  
allowed in the month)  
Halt On  
[All, But Keyboard]  
<Year>  
Base Memory  
Extended Memory  
Total Memory  
640K  
127M  
128M  
1999 to 2098  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F1: General Help  
F5: Previous Values  
F7: Optimized Defaults  
n Date (mm:dd:yy)  
Allows you to setup the date in the mm:dd:yy fashion.  
n Time (hh:mm:ss)  
Allows you to set up the date in the hh:mm:ss fashion. The time must be entered in the  
24-hour format.  
n IDE Channel 0 Master(Slave) / IDE Channel 1 Master(Slave)  
[IDE Device Setup]  
IDE HDD Auto-Detection  
detection.  
Press "Enter" to select this option for automatic device  
IDE Channel 0 Master(Slave) / IDE Channel 1 Master(Slave) IDE Device Setup. You can  
use one of three methods:  
Auto  
None  
Allows BIOS to automatically detect IDE devices during POST(default)  
Select this if no IDE devices are used and the system will skip the  
automatic detection step and allow for faster system start up.  
User can manually input the correct settings  
Manual  
Access Mode Use this to set the access mode for the hard drive. The four options are:  
CHS/LBA/Large/Auto(default:Auto)  
Capacity  
Capacity of currently installed hard disk.  
Hard drive information should be labeled on the outside drive casing. Enter the  
appropriate option based on this information.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n IDE Channel 2/3 Master [IDE Device Setup]  
IDE HDD Auto-Detection  
Press "Enter" to select this option for automatic device  
detection.  
IDE Channel 0 Master(Slave) / IDE Channel 1 Master(Slave) IDE Device Setup. You can  
use one of two methods:  
Auto  
Allows BIOS to automatically detect IDE devices during POST(default)  
Select this if no IDE devices are used and the system will skip the  
automatic detection step and allow for faster system start up.  
None  
Access Mode Use this to set the access mode for the hard drive. The four options are:  
CHS/LBA/Large/Auto(default:Auto)  
Capacity  
Capacity of currently installed hard disk.  
Hard drive information should be labeled on the outside drive casing. Enter the  
appropriate option based on this information.  
n Drive A/B  
Allows user to configure the type of floppy drive his/she installs.  
Options:  
None (No floppy drive installed)  
360K, 5.25" (5.25 inch PC-type high-density drive; 360K bytes  
capacity.)  
1.2M, 5.25" (5.25 inch AT-type high-density drive; 1.2M bytes  
capacity.)  
720K, 3.5" (3.5 inch double-sided drive; 720K bytes capacity.)  
1.44M, 3.5" (3.5 inch double-sided drive; 1.44M bytes capacity.)  
2.88M, 3.5" (3.5 inch double-sided drive; 2.88M bytes capacity.)  
n Floppy 3 Mode Support  
Allows user to configure a Japanese standard 3 Mode floppy drive.  
Options:  
Disabled (No 3 Mode drive installed)  
Drive A (3 Mode Drive installed in A:)  
Drive B (3 Mode Drive installed in B:)  
Both (3 Mode Drive installed in A: and B:)  
n Halt on  
Tells the BIOS specifically which types of errors will halt the computer during the power-  
on self test (POST) section of the boot.  
Options:  
No Errors (Never halt when an error is detected)  
All Errors (Halt whenever an error is detected)  
All, But Keyboard (Halt whenever an error is detected with the  
exception of the keyboard)  
All, But Diskette (Halt whenever an error is detected with the ex  
ception of the diskette)  
All, But Disk/Key (Halt whenever an error is detected with the  
exception of the diskette and keyboard) (default:All, But Keyboard)  
n Memory  
When BIOS is displayed during POST, memory capacity is also displayed as shown  
below:  
Base Memory, Extended Memory, Total Memory (the user can verify the accuracy of  
these values)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.3.  
Advanced BIOS Features  
ø
Allows the configuration of advanced settings such as boot sequence, password  
check, etc.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
Advanced BIOS Features  
}
Hard Disk Boot Priority  
First Boot Device  
[Press Enter]  
[Floppy]  
Item Help  
Menu Level}  
Second Boot Device  
Third Boot Device  
Password Check  
[Hard Disk]  
[CDROM]  
[Setup]  
Select Boot Device  
priority  
CPU Hyper-Threading#  
Limit CPUID Max. to 3  
No-Execute Memory Protect(Note)  
CPU Enhanced Halt (C1E)(Note)  
CPU Thermal Monitor 2(TM2) (Note)  
Init Display First  
[Enabled]  
[Disabled]  
[Disabled]  
[Disabled]  
[Disabled]  
[AGU]  
[Floppy]  
Boot from floppy  
[LS120]  
Boot from LS120  
On-Chip Frame Buffer Size  
[16MB]  
[HDD-0]  
Boot from First HDD  
[HDD-1]  
Boot from Second HDD  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F7: Optimized Defaults  
F1: General Help  
F5: Previous Values  
" # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology,  
the system will automatically provide this option.  
n Hard Disk Boot Priority  
The user can select the boot order for hard disks connected to onboard IDE, SATA,  
SCSI, RAID controllers or other add-on cards.  
n First / Second / Third Boot Device  
The user can select the order in which the system will boot.  
Options:  
Floppy, LS120,Hard Disk, CDROM, ZIP,USB-FDD, USB-ZIP, USB-  
CDROM, USB-HDD, LAN, Disabled  
n Password Check  
Allows user to set a password. To remove the password entry requirement, enter  
SETUP and make sure there is no entry and then press <Enter>.  
Options:  
System (Password entry is required during system start up and to enter  
CMOS SETUP)  
Setup (Password entry is required to enter CMOS SETUP)(default:Setup)  
n CPU Hyper-Threading #  
Allows user to enable the CPU Hyper-Threading function, of which must also be  
supported by the operating system. (default: Enabled)  
n Limit CPUID Max. to 3  
This option will be available when you install an Intel Prescott processor.  
Enable this item when you install old operating systems (example:NT 4.0)  
(default: Disabled)  
(Note) If the installed CPU supports this function, the system will automatically provide this  
option.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n No-Execute Memory Protect(Note)  
Allows user to enable the No-Execute Memory Protect function. (default: Disabled)  
n CPU Enhanced Halt (C1E)(Note)  
Allows user to enable the CPU Enhanced Halt (C1E) function. (default: Disabled)  
n CPU Thermal Monitor 2(TM2)(Note)  
Allows user to enable the CPU Thermal Monitor 2(TM2) function. (default: Disabled)  
n Init Display First  
Allows you to select whether to boot the system using the AGP graphics card or the PCI  
graphics card.  
Options:  
AGU (boot using AGU graphics card)  
Onboard (boot using onboard AGP)  
PCI(boot using PCI graphics card). (default: AGU)  
n On-Chip Frame Buffer Size  
Allows user to set the size of the on-chip frame buffer.  
Options:  
1MB/4MB/8MB/16MB/32MB (default:16MB)  
3.4.  
Integrated Peripherals  
ø
This menu allows you to control the various ports of the computer such as IDE,  
SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
Integrated Peripherals  
On-Chip Primary PCI IDE  
On-Chip Secondary PCI IDE  
On-Chip SATA  
[Enabled]  
[Enabled]  
[Auto]  
Item Help  
Menu Level}  
If a hard disk  
x
x
SATA Port0 Configure as  
SATA Port1 Configure as  
USB Controller  
USB 2.0 Controller  
USB Keyboard Support  
USB Mouse Support  
AC97 Audio  
SATA Port0  
SATA Port1  
[Enabled]  
[Enabled]  
[Disabled]  
[Disabled]  
[Auto]  
controller card is  
used, set at Disabled  
[Enabled]  
Enable onboard IDE  
PORT  
Onboard H/W LAN  
POWER ON Function  
Onboard Serial Port 1  
Onboard Parallel Port  
Parallel Port Mode  
[Enabled]  
[Disabled]  
[3F8/IRQ4]  
[378/IRQ7]  
[PRINTER]  
3
[Disabled]  
Disable onboard IDE  
PORT  
x
ECP Mode Use DMA  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F7: Optimized Defaults  
F1: General Help  
F5: Previous Values  
n On-Chip Primary PCI IDE  
Allows the user to enable or disable the first onboard IDE channel.  
(default:Enabled)  
n On-Chip Secondary PCI IDE  
Allows the user to enable or disable the second onboard IDE channel.  
(default:Enabled)  
(Note) If the installed CPU supports this function, the system will automatically provide this  
option.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n On-Chip SATA  
Options: Disabled (Disable this function.)  
Auto (When there is no device connected to IDE1 or IDE 2 channel,  
SATA will be configured as IDE mode.)  
Manual (Manually configure SATA mode via the "SATA Port0 configure  
as" option.) (default:Auto)  
n SATA Port0 configure as (Set SATA Mode)  
Options: IDE Pri. Master (Set SATA Port 0 to IDE Primary Master.)  
IDE Pri. Slave (Set SATA Port 0 to IDE Primary Slave.)  
IDE Sec. Master (Set SATA Port 0 to IDE Secondary Master.)  
IDE Sec. Slave (Set SATA Port 0 to IDE Secondary Slave.)  
SATA Port0 (Set SATA Port 0 to SATA Port0.) (This mode is supported by  
only Windows XP or later operating systems)  
SATA Port1 (Set SATA Port 0 to SATA Port1.) (This mode is supported by  
only Windows XP or later operating systems) (default:SATA Port0)  
n SATA Port1 configure as  
The item depends on what you set for "SATA Port0 configure as."  
n USB Controller  
Allows the user to enable or disable the onboard USB2.0 controller. (default:Enabled)  
n USB 2.0 Controller  
Allows the user to enable or disable the onboard USB2.0 (default:Enabled)  
n USB Keyboard Support  
Allows user to use a USB-based keyboard (Enable if you are using a USB keyboard,  
otherwise Disable) (default:Disabled)  
n USB Mouse Support  
Allows user to use a USB-based mouse (Enable if you are using a USB mouse,  
otherwise Disable) (default:Disabled)  
n AC97 Audio  
Allows the user to use the onboard AC97 audio (default:Auto)  
n Onboard H/W LAN  
Allows the user to enable or disable the onboard LAN (default:Enabled)  
n POWER ON Function  
Allows the user to enable or disable the power on function (default:Disabled)  
n Onboard Serial Port 1  
Allows the user to enable or disable the first onboard serial port  
Options:  
Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4)  
n Onboard Parallel Port  
Allows the user to enable or disable the onboard parallel port.  
Options:  
378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled (default:378/IRQ7)  
n Parallel Mode  
Use this to select the operation mode for the parallel port.  
Options:  
PRINTER  
SPP (normal)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ECP (Extended Capabilities Port)  
EPP1.9+ECP (both EPP and ECP)  
EPP1.9+SPP (both EPP and SPP)  
EPP1.7+ECP (both EPP and ECP)  
EPP1.7+SPP (both EPP and SPP) (default:PRINTER)  
n ECP Mode Use DMA  
Allows the user to select the ECP Mode Use DMA  
Options: 1, 3, Disabled (default:3)  
3.5.  
Power Management Setup  
ø
This is used to control the various power saving features of the PC.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
Power Management Setup  
ACPI Suspend Type  
Power LED in S1 State  
Off by Power button  
AC Back Function  
PME Event Wake Up  
ModemRingOn/WakeOnLan  
Resume by Alarm  
[S1(POS)]  
[Blinking]  
[Instant-Off]  
[Soft-Off]  
[Enabled]  
[Enabled]  
[Disabled]  
Everyday  
0 : 0 : 0  
Item Help  
Menu Level}  
[S1]  
Set suspend type to  
Power On Suspend under  
ACPI OS  
x
x
Date (of Month) Alarm  
Time (hh:mm:ss) Alarm  
[S3]  
Set suspend type to  
Suspend to RAM under  
ACPI OS  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F1: General Help  
F5: Previous Values  
F7: Optimized Defaults  
n ACPI Suspend Type  
Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/  
POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)  
n Power LED in S1 state  
Allows user to select the system LED status in the S1 (POS - Power On Suspend) state.  
Options:  
Blinking (LED will blink)  
Dual/OFF (When selecting this, the LED will turn off for a single-colored LED  
or change color for a dual-colored LED)(default:Blinking)  
n Off by Power button  
Controls whether the PC shuts off immediately after hitting the power button or delaying  
a few seconds. (default:Instant-off)  
Options:  
Instant-off (PC shuts off immediately)  
Delay 4 Sec. (PC shuts off after a 4sec. delay)  
n AC Back Function  
Allows user to select system status when power is removed and returned.  
Options:  
Memory (return prior to power removal)  
Full-On (return to full system power)  
Soft-Off (use of Soft PWR button to power on system)(default:Soft-Off)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n PME Event Wake Up  
Allows user to select the Power Management Event (PME) wake up function which  
requires the system to have a +5VSB power supply using a rate of 1A or less.  
(default:Enabled)  
n ModemRingOn/WakeOnLan  
To use this feature, an Ethernet card supporting the PCI2.2 or newer standard must be  
used. (default:Enabled)  
n Resume by Alarm  
If set to Enabled, the user can set the date and time for automatic system power-on.  
(default:Disabled)  
Settings:  
Date (of Month) Alarm :  
Everyday, 1~31  
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)  
3.6.  
PnP/PCI Configuration  
ø
This menu allows you to configure your PCI slots. You can assign IRQ's for various PCI  
slots.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
PnP/PCI Configurations  
PCI 1 IRQ Assignment  
PCI 2 IRQ Assignment  
PCI 3 IRQ Assignment  
[Auto]  
[Auto]  
[Auto]  
Item Help  
Menu Level}  
Device(s) using this  
INT:  
IDE Cntrlr  
-Bus 0 Dev 31 Func 2  
USB 1.1 Host cntrlr  
-Bus 0 Dev 29 Func 2  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F7: Optimized Defaults  
F1: General Help  
F5: Previous Values  
n PCI 1 IRQ Assignment  
Allows you to assign an IRQ for the first PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14,  
15 (default:Auto)  
n PCI 2 IRQ Assignment  
Allows you to assign an IRQ for the second PCI slot. Options: Auto,3,4,5,7,9,10,11,12,  
14,15 (default:Auto)  
n PCI 3 IRQ Assignment  
Allows you to assign an IRQ for the third PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14,  
15 (default:Auto)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.7.  
PC Health Status  
ø
This menu displays the current CPU temperature, the fan speeds, voltages etc.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
PC Health Status  
Current CPU Temperature  
Current System Temperature  
Vcore  
45°C  
30°C  
1.78V  
Item Help  
Menu Level}  
DDR25V  
+3.3V  
2.544V  
3.36V  
+5V  
5.14V  
+12V  
11.84V  
4440 RPM  
0 RPM  
[Enabled]  
[Auto]  
Current CPU FAN Speed  
Current SYSTEM FAN Speed  
CPU Smart FAN Control  
CPU Smart FAN Mode  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F1: General Help  
F5: Previous Values  
F7: Optimized Defaults  
n Current CPU / System Temperature  
Automatically checks CPU & System temperature  
n Current Voltage(V) Vcore / DDR25V / +3.3V / +5V / +12V  
Automatically checks system voltage  
n Current CPU / SYSTEM FAN Speed (RPM)  
Automatically checks CPU/SYSTEM fan speed.  
n CPU Smart FAN Control  
Allows users to enable or disable the CPU Smart FAN Control function. (default:  
Enabled) With this item set to enabled, CPU fan changes speed depending on CPU  
temperature.  
n CPU Smart FAN Mode  
Allows users to set the CPU Smart FAN mode when CPU Smart FAN Control is set to  
Enabled. (default: Auto)  
Options:  
Auto (BIOS autochecks which type of CPU fan is installed and sets the  
optimcal CPU Smart FAN control mode.)  
Voltage (Set this item to Voltage if a 3-pin CPU fan is installed.)  
PWM (Set this item to PWM if a 4-pin CPU fan is installed.)  
In fact, you can set the CPU Smart Fan Control mode to Voltage for either 3-  
pin or 4-pin CPU fan. However, for those 4-pin CPU fans that are not  
designed following Intel's 4-wire fans PWM control specifications, setting  
the CPU Smart Fan Control mode to PWM may not effectively reduce the  
CPU fan speed.  
Note:  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.8.  
Frequency/Voltage Control  
ø
This allows user to configure CPU frequency and voltage settings.  
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software  
Frequency/Voltage Control  
CPU Clock Ratio  
Memory Frequency For  
Memory Frequency (Mhz)  
[15X]  
[Auto]  
266  
Item Help  
Menu Level}  
Set CPU Ratio if CPU  
Ratio is unlocked  
higf: Move  
Enter: Select  
+/-/PU/PD: Value  
F6: Fail-Safe Defaults  
F10: Save  
ESC: Exit  
F7: Optimized Defaults  
F1: General Help  
F5: Previous Values  
n CPU Clock Ratio  
Allows user to set the CPU Clock Ratio.  
If the CPU used locks this feature, then it will not be displayed or will not function. (based  
on CPU type)  
n Memory Frequency For  
Allows user to set memory frequency (default:Auto)  
for FSB(Front Side Bus) frequency=533MHz,  
2.0  
Memory Frequency = Host clock X 2.0.  
Memory Frequency = Host clock X 2.5.  
Set Memory frequency by DRAM SPD data.  
2.5  
Auto  
for FSB(Front Side Bus) frequency=800MHz,  
2.0  
Memory Frequency = Host clock X 2.0.  
Memory Frequency = Host clock X 1.66.  
Memory Frequency = Host clock X 1.33.  
Set Memory frequency by DRAM SPD data.  
1.66  
1.33  
Auto  
n Memory Frequency (Mhz)  
The memory frequency is based on the " Memory Frequency For" setting.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.9.  
Load Fail-Safe Defaults  
ø
Use this option to reset your BIOS settings to the system defaults. You should only use  
this if you are encountering serious problems.  
Please select <Y> and <Enter> to load Fail-Safe defaults. Once this is loaded, your  
system may be slowed since this uses a minimal performance setting to allow stable  
system running.  
3.10. Load Optimized Defaults  
ø
Like the Fail-Safe mode above, this option loads the BIOS default settings, but runs the  
system at optimal performance.  
Please select <Y> and <Enter> to load optimized defaults.  
3.11. Set User Password  
ø
Use this to set the password that is needed to either enter into the BIOS or to boot the  
system. Entering in a blank field will disable the password.  
Please input an 8 character long password and then select Enter. You will be required  
to re-enter the password for confirmation. If you wish to remove the need for password  
entry, leave the entry blank and then select Enter. BIOS will then display "PASSWORD  
DISABLED". Once you have completed the password setting, you will need to go to  
"Advanced BIOS Features" and select "Password Check" for setup of password check.  
3.12. Save & Exit Setup  
ø
To save any changes you made to the BIOS you must choose this option. The  
system will automatically exit setup and perform a system restart. Pushing <F10>  
will have the same effect.  
Push <Y> and <Enter> to save and exit setup. If you do not wish to save, select <N> or  
<Esc> to return to the main menu.  
3.13. Exit Without Saving  
ø
Use this option instead of the one above if you wish to exit the BIOS without saving the  
changes you have made. Pushing <ESC> will have the same effect.  
Push <Y> and <Enter> to exit setup. You can return to the main menu by pushing <N>or  
<Esc>.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.  
Driver Installation  
Driver installation for the Windows 98/98SE/2000/ME/XP operating systems is simple. Once  
you insert the provided driver disks into your optical drive, the AUTORUN screen will appear.  
If this screen does not appear, you can use "D:\setup.exe" (with "D" being the specified drive)  
to bring up the screen shown below. Just follow the screen instructions to easily complete  
driver installation.  
Open User Manual  
Display system information  
Open Readme File  
Browse CD  
Contact Us  
axper Install -Displays required driver installation, select "Go" for  
automatic installation  
Customize Installation - Allows specific choice of drivers for installation  
axper Utilities - Displays axper's unique utilities  
Software - Displays the required software  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Water Pump 613100 1 User Manual
Intel Network Card 3U Compact PCI User Manual
Jenn Air Range PRD3630 User Manual
Jensen Speaker XRS Series User Manual
JL Audio Car Amplifier XD700 5 User Manual
JVC Camera Accessories GZ E10 User Manual
JVC Car Stereo System GET0626 001A User Manual
Kawasaki Cordless Saw 840067 User Manual
Kenmore Microwave Oven 6912 User Manual
Kidde Smoke Alarm 820 0898 User Manual