Intel® Solid-State Drive 530 Series (M.2)
Intel® Solid-State Drive 530 Series (M.2)
Product Specification
Capacities: 80 GB, 120 GB, 180 GB, 360 GB
Components:
Power Management
−
−
−
3.3 V SATA Supply Rail
SATA Link Power Management (LPM)
Device Sleep (DevSleep)
−
−
Intel® 20 nm NAND Flash Memory
Multi-Level Cell (MLC)
Power
Form Factors: M.2 80 mm (single- and double-
sided)
−
Active (BAPCo MobileMark* 2007
Workload): 140 mW
−
−
2280-S2-B-M (80 GB and 180 GB)
2280-D2-B-M (120 GB and 360 GB)
−
−
Idle3: 55 mW
DevSleep: 200 µW
Thickness: up to 3.58 mm
Weight: < 10 grams
Temperature
SATA 6 Gb/s Bandwidth Performance1
(Iometer* Queue Depth 32)
−
−
−
−
Operating4: 0o C to 70o C
Non-Operating: -55o C to 95o C
Reliability
Sustained Sequential Read: up to 540 MB/s
Sustained Sequential Write: up to 490
MB/s
— Uncorrectable Bit Error Rate (UBER):
<1 sector per 1016 bits read
Read and Write IOPS1
— Mean Time Between Failure (MTBF):
1,200,000 hours
(Iometer Queue Depth 32)
— Shock (operating and non-operating):
1,000 G/0.5 msec
−
−
Random 4 KB Reads: up to 41,000 IOPS
Random 4 KB Writes: up to 80,000 IOPS2
Vibration
Data Compression
— Operating: 2.17 GRMS (5-700 Hz)
— Non-operating: 3.13 GRMS (5-800 Hz)
Certifications and Declarations:
AES 256-bit Encryption
End-to-End Data Protection
Compatibility
−
−
−
−
−
−
−
−
UL*
CE*
C-Tick*
BSMI*
KCC*
Microsoft* WHCK
VCCI*
SATA-IO*
−
Intel® SSD Toolbox with Intel® SSD
Optimizer
Intel® Data Migration Software
Intel® Rapid Storage Technology
SATA Revision 3.0
−
−
−
−
−
ACS-2 (ATA/ATAPI Command Set 2)
SSD Enhanced SMART ATA feature set
Product Ecological Compliance
RoHS*
−
NOTES:
1.
2.
3.
4.
Performance values vary by capacity.
Random 4 KB writes measured using out-of-box SSD.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the
system for maintaining proper device operating temperatures on heavier workloads.
September 2013
Order Number: 329213-002US
Product Specification
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Contents
Revision History....................................................................................................................4
Introduction...............................................................................................................5
Terminology................................................................................................................. 6
Reference Documents.................................................................................................... 7
Product Specifications................................................................................................8
Performance................................................................................................................. 8
Reliability................................................................................................................... 12
Mechanical Information ...........................................................................................13
Pin and Signal Descriptions......................................................................................15
Device Sleep Feature................................................................................................... 17
Supported Command Sets........................................................................................18
Power Management..................................................................................................... 19
SMART Command Set.................................................................................................. 20
SMART Attributes........................................................................................... 20
SMART Command Transport......................................................................................... 24
48-Bit Address Command Set....................................................................................... 24
Native Command Queuing............................................................................................ 24
Software Settings Preservation..................................................................................... 25
SATA Link Power Management (LPM)............................................................................. 25
Certifications and Declarations ................................................................................26
Appendix..................................................................................................................27
September 2013
Order Number: 329213-002US
Product Specification
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Revision History
Document
Number
Revision
Number
Description
Revision Date
329213
329213
001US
002US
Initial release
July 2013
Added 120GB capacity
September 2013
Product Specification
4
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
1 Introduction
This document describes the specifications and capabilities of the Intel® Solid-State Drive 530 Series
(Intel® SSD 530 Series).
The Intel® SSD 530 Series is a case-less, M.2, next generation storage solution designed for
Ultrabook™. The new M.2 form factor allows ultra-compact solutions which deliver leading
performance for Serial Advanced Technology Attachment (SATA)-based computers in capacities
ranging up to 360 GB.
The latest feature addition is the DevSleep functionality, a low power drive state controlled by the host
via the DevSleep pin. The drive will consume a mere 200 µW while in this state.
As compared to standard SATA HDDs, Intel SSD 530 Series offers these key features:
•
•
•
•
•
•
•
High I/O and throughput performance
Low power consumption
Increased system responsiveness
High reliability
Enhanced ruggedness
Small form-factor
Minimum weight
The Intel SSD 530 Series also offers additional key features such as:
Advanced Encryption Standard (AES) 256-bit Encryption
•
AES 256-bit encryption is an industry standard in data security, providing a hardware-based
mechanism for encryption and decryption of user data. Utilizing a 256-bit encryption key, AES
encryption—when combined with an ATA drive password—helps protect user data.
•
End-to-End Data Protection
End-to-end data protection helps protect data from being corrupted across the data path by using
cyclic redundancy check (CRC), parity, and error correction code (ECC) checks in the data path from
the host interface to the NAND, and back.
•
Data Compression
Data compression helps improve performance and endurance by automatically compressing
information sent to the SSD so that less data has to be processed and stored on the NAND. The
amount of data that can be compressed depends on the type of data.
September 2013
Order Number: 329213-002US
Product Specification
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
1.1
Terminology
Table 1: Terminology
Term
Description
ATA
Advanced Technology Attachment
Device Activity Signal
DAS
DevSleep
DIPM
DMA
Device Sleep, a new addition to the SATA specification
Device Initiated Power Management
Direct Memory Access
EXT
Extended
FPDMA
First Party Direct Memory Access
Gigabyte (1,000,000,000 bytes)
Note: The total usable capacity of the SSD may be less than the total physical
capacity because a small portion of the capacity is used for NAND flash
management and maintenance purposes.
GB
HDD
HIPM
I/O
Hard Disk Drive
Host Initiated Power Management
Input/Output
IOPS
KB
Input/Output Operations Per Second
Kilobyte (1,024 bytes)
LBA
Logical Block Address
LPM
Link Power Management
Megabyte (1,000,000 bytes)
Multi-level Cell
MB
MLC
MTBF
NCQ
NOP
PIO
Mean Time Between Failures
Native Command Queuing
No Operation
Programmed Input/Output
Reliability Demonstration Test
Root Mean Squared
RDT
RMS
SATA
SMART
SSD
TYP
Serial Advanced Technology Attachment
Self-Monitoring, Analysis and Reporting Technology
Solid-State Drive
Typical
UBER
Uncorrectable Bit Error Rate
Product Specification
6
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
1.2
Reference Documents
Table 2: Standard References
Date or Rev. #
Title
Location
IEC 55022 Information Technology Equipment —
Radio disturbance Characteristics— Limits and
methods of measurement CISPR22:2008
(Modified)
Sept 2008
Dec 2008
June 2009
VCCI
Click Search MDDS Database and search
for material description datasheet
RoHS
June 2009
Serial ATA Revision 3.0
ACS-2- Specification
August 2009
IEC 55024 Information Technology Equipment —
Immunity characteristics— Limits and methods of
measurement CISPR24:2010
August 2010
Solid-State Drive (SSD) Requirements and
Endurance Test Method (JESD218)
documents/docs/jesd218/
Sept 2010
Oct 2010
TPR053v11_SATA31_M.2_Card_Format_for_SSDs
September 2013
Order Number: 329213-002US
Product Specification
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
2 Product Specifications
2.1
Capacity
Table 3: User Addressable Sectors
Intel® SSD 530 Series
Unformatted Capacity (Total User Addressable Sectors in LBA mode)
80 GB
156,301,488
234,441,648
351,651,888
703,282,608
120 GB
180 GB
360 GB
2.2
Performance
Table 4: Compressible Performance
Specification
Unit
Intel® SSD 530 Series
80 GB
120 GB
180 GB
360 GB
Random 4 KB Read (up to)1
Random 4 KB Write (up to)2
Random 4 KB Write (TYP) 1
Sequential 128 KB Read
(SATA 6 Gb/s)1
IOPS
IOPS
IOPS
24,000
80,000
33,000
24,000
80,000
37,500
41,000
80,000
49,000
41,000
37,000
29,500
MB/s
MB/s
540
480
540
480
540
490
540
490
Sequential 128 KB Write
(SATA 6 Gb/s)1
Note:
1.
Performance measured using Iometer* with Queue Depth 32. Measurements are performed on 8 GB of
Logical Block Address (LBA) range on a full SSD
2.
Random 4 KB writes measured using out-of-box SSD.
Table 5: Incompressible Performance
Specification
Unit
Intel® SSD 530 Series
80 GB
120 GB
180 GB
360 GB
Random 4 KB Read (up to)1
Random 4 KB Write (up to) 1
Sequential 128 KB Read
(SATA 6 Gb/s)1
Sequential 128 KB Write
(SATA 6 Gb/s)1
IOPS
IOPS
20,500
9,200
18,000
15,000
37,500
17,000
37,500
10,000
MB/s
MB/s
430
100
450
130
470
170
525
240
Note:
Product Specification
8
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
1. Performance measured using Iometer* with Queue Depth 32
Table 6: Latency
Specification
Intel® SSD 530 Series
120 GB 180 GB
80 GB
360 GB
Read1
80 µs (TYP)
85 µs (TYP)
1 s (TYP)
Write1
Power On To Ready2
Note:
1.
2.
Based on sequential 4 KB using Iometer with Queue Depth 1 workload with compressible (non-random)
data pattern. Write Cache enabled.
Power On To Ready time assumes proper shutdown
2.3
Electrical Characteristics
Table 7: Operating Voltage and Power Consumption
Electrical Characteristics
Value
80 GB
120 GB
180 GB
360 GB
Operating Voltage for 3.3 V (±5%)
Min
Max
3.14 V
3.47 V
Rise Time (Max/Min)
Fall Time (Max/Min)
Noise Tolerance
Min Off Time1
Power Consumption (TYP)
Active2
100 ms / 0.1 ms
5 s / 1 ms
50 mV pp (10 Hz – 30 MHz)
1 s
140 mW
55 mW
200 µW
Idle3
DevSleep4
Thermal Power5
2.7 W
3 W
3.1 W
3.4 W
3.8 W
4.1 W
4.5 W
5.5 W
Regulator Power6
Note:
1.
Minimum time from when power removed from drive (Vcc < 100 mV) to when power can be reapplied to
drive.
2.
Active power measured during execution of MobileMark* 2007 with SATA Link Power Management (LPM)
enabled.
3.
4.
5.
Non-DevSleep idle power with SATA Link Power Management (LPM) enabled.
Power consumption during DevSleep state.
Power measured during 128 KB sequential writes with Queue Depth 32 workload using 100 ms sample
period. This represents power that would be thermal load on system during heavy workloads.
Power measured during 128 KB sequential writes with Queue Depth 32 workload using 500 µs sample
period. This represents power that system power supply would have to regulate for proper device
operation.
6.
September 2013
Order Number: 329213-002US
Product Specification
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
2.4
Environmental Conditions
2.4.1
Temperature, Shock, Vibration
Table 8: Temperature, Shock, Vibration
Electrical Characteristics
Range
Module Temperature
Operating1
0º C - 70º C
-55º C - 95º C
Non-operating2
Temperature Gradient3
Operating
30 (TYP) ºC/hr
30 (TYP) ºC/hr
Non-operating
Humidity
Operating
5 – 95 %
5 – 95 %
Non-operating
Shock and Vibration
Shock4
Range
Operating
Non-operating
Vibration5
1,000 G (Max) at 0.5 msec
1,000 G (Max) at 0.5 msec
Operating
Non-operating
2.17 GRMS (5-700 Hz) Max
3.13 GRMS (5-800 Hz) Max
Note:
1.
As measured by temperature sensor, SMART Attribute BEh. Active airflow is recommended within the
system for maintaining proper device operating temperature on heavier workloads.
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specifications assume the SSD is mounted securely with the input vibration applied to the drive-
mounting screws. Stimulus may be applied in the X, Y or Z axis. Shock specification is measured using
peak acceleration and pulse width value.
2.
3.
4.
5.
Vibration specifications assume the SSD is mounted securely with the input vibration applied to the
drive-mounting screws. Stimulus may be applied in the X, Y or Z axis. Vibration specification is
measured using Root Mean Squared (RMS) value.
2.4.2
Altitude
The drive is not sensitive to changes in atmospheric pressure because it has no moving parts. Drive
tested under non-operational conditions to pressures representative of -1 K and +40 K feet.
Product Specification
10
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
2.5
Product Regulatory Compliance
The Intel® SSD 530 Series meets or exceeds the regulatory or certification requirements in the table
below.
Table 9: Product Regulatory Compliance Specifications
Title
Description
Region For Which
Conformity
Declared
TITLE 47-Telecommunications CHAPTER
1— FEDERAL COMMUNMICATIONS
COMMISSION PART 15 — RADIO
FREQUENCY DEVICES
FCC Part 15B Class B
USA
CA/CSA-CEI/IEC CISPR 22-10 (Ref.
CISPR 22:2008).
ICES-003, Issue 4 Interference-Causing
Equipment
Standard Digital Apparatus
Canada
IEC 55024 Information Technology
Equipment — Immunity characteristics—
Limits and methods of measurement
CISPR24:2010
EN-55024: 2010 and its amendments
EN-55022: 2010 and its amendments
European Union
European Union
IEC 55022 Information Technology
Equipment — Radio disturbance
Characteristics— Limits and methods of
measurement CISPR24:2008 (Modified)
Information Technology Equipment —
Safety — Part 1: General Requirements
EN-60950-1 2nd Edition
USA/Canada
USA/Canada
Information Technology Equipment —
Safety — Part 1: General Requirements
UL/CSA EN-60950-1 2nd Edition
September 2013
Order Number: 329213-002US
Product Specification
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
2.6
Reliability
The Intel® SSD 530 Series meets or exceeds SSD endurance and data retention requirements as
specified in the JESD218 specification.
Table 10: Reliability Specifications
Parameter
Value
Uncorrectable Bit Error Rate (UBER)
Uncorrectable bit error rate will not exceed one sector in the specified
number of bits read. In the unlikely event of a non-recoverable read error,
the SSD will report it as a read failure to the host; the sector in error is
considered corrupt and is not returned to the host.
< 1 sector per 1016 bits read
Mean Time Between Failures (MTBF)
Mean Time Between Failures is estimated based on Telcordia*
methodology and demonstrated through Reliability Demonstration Test
(RDT).
≥ 1.2 million hours
Minimum Useful Life/Endurance Rating
5 years
The SSD will have a minimum useful life based on a typical client workload
assuming up to 20 GB of host writes per day.
Insertion Cycles
250 insertion/removal cycles
Maximum insertion/removal cycles on M.2 port
Product Specification
12
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
3 Mechanical Information
The Intel® SSD 530 Series meets the proposed specification for 80mm M.2 form factor
The figure below shows the physical package information for the 80 mm height, M.2 Intel® SSD 530
Series SSD. All dimensions are in millimeters.
Figure 1: Dimensions for 80 mm double-sided M.2 Form Factor (2280-D2-B-M) 120 GB and
360 GB
September 2013
Order Number: 329213-002US
Product Specification
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Figure 2: Dimensions for 80 mm single-sided M.2 Form Factor (2280-S2-B-M) 80 GB and
180 GB
Product Specification
14
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
4.2
Signal Descriptions
Table 11: M.2 Serial ATA Power Pin Definitions
Pin Function
CONFIG_3
Definition
P1
P2
P3
P4
P5
P6
P7
P8
P9
Ground
+3.3 V
GND
3.3 V Source
Ground
+3.3 V
Reserved
Reserved
Reserved
Reserved
Reserved
DAS/DSS#
Reserved
Notch
Notch
Notch
Notch
Notch
3.3 V Source
No Connect
No Connect
No Connect
No Connect
No Connect
Device Activity Signal / Disable Staggered Spin-up
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
Ground
No Connect
No Connect
No Connect
No Connect
No Connect
Ground
No Connect
No Connect
No Connect
No Connect
No Connect
Ground
No Connect
No Connect
No Connect
No Connect
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
P23
P24
P25
P26
P27
P28
P29
P30
P31
P32
P33
P34
P35
P36
P37
P38
P39
P40
P41
P42
P43
P44
P45
P46
P47
Notch
Notch
Notch
Reserved
CONFIG_0
Reserved
Reserved
Reserved
Reserved
Reserved
GND
Reserved
Reserved
Reserved
Reserved
Reserved
GND
Reserved
Reserved
Reserved
Reserved
DEVSLP
GND
DevSleep Pin
Ground
No Connect
Reserved
+B
Reserved
-B
Reserved
GND
Reserved
-A
Host Receiver Differential Signal Pair (This is an output of the SSD)
No Connect
Host Receiver Differential Signal Pair (This is an output of the SSD)
No Connect
Ground
No Connect
Host Transmitter Differential Signal Pair (This is an input of the SSD)
Product Specification
16
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Pin
P48
Function
Reserved
Definition
No Connect
P49
P50
P51
P52
P53
P54
P55
P56
P57
P58
P59
P60
P61
P62
P63
P64
P65
P66
P67
P68
P69
P70
P71
P72
P73
P74
P75
+A
Reserved
GND
Reserved
Reserved
Reserved
Reserved
Two Wire Interface
GND
Two Wire Interface
Notch
Notch
Notch
Notch
Notch
Notch
Notch
Notch
Reserved
Reserved
CONFIG_1
+3.3 V
GND
+3.3 V
Host Transmitter Differential Signal Pair (This is an input of the SSD)
No Connect
Ground
No Connect
No Connect
No Connect
No Connect
Two Wire Interface Clock
Ground
Two Wire Interface Data
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
No Connect
Ground
3.3 V Source
Ground
3.3 V Source
Ground
3.3 V Source
Ground
GND
+3.3 V
CONFIG_2
4.3
Device Sleep Feature
Device Sleep (or DevSleep/DEVSLP) is the latest feature aligned with Intel® 4th Generation Core™-
based Ultrabooks™. Ultrabook™ has stringent power requirements for SSDs and as such requires an
ability to put the drive in a low power state. Although Link Power Management allows some control
over power consumption, both methods still require the SATA link to remain online. The DevSleep pin
is an enable high pin.
September 2013
Order Number: 329213-002US
Product Specification
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
5 Supported Command Sets
The Intel SSD 530 Series supports all mandatory Advanced Technology Attachment (ATA) and Serial
ATA (SATA) commands defined in the ACS-2 and SATA Revision 3.0 specifications. The mandatory and
optional commands are defined in this section.
5.1
ATA General Feature Command Set
General Feature command set (non-PACKET), which consists of:
−
−
−
−
−
−
−
−
−
−
−
−
−
EXECUTE DEVICE DIAGNOSTIC
FLUSH CACHE
IDENTIFY DEVICE
1
READ DMA
READ SECTOR(S)
READ VERIFY SECTOR(S)
SEEK
SET FEATURES
WRITE DMA
WRITE SECTOR(S)
READ MULTIPLE
SET MULTIPLE MODE
WRITE MULTIPLE
The Intel SSD 530 Series also supports the following optional commands:
−
−
−
−
READ BUFFFER
WRITE BUFFER
NOP
DOWNLOAD MICROCODE
Note:
1.
See the Appendix for details on the sector data returned after issuing an IDENTIFY DEVICE command.
Product Specification
18
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
5.2
Power Management
The Intel SSD 530 Series supports several power management feature sets as defined by the ATA
specification: general Power Management feature set, Advanced Power Management feature set, and
Power-Up in Standby (PUIS) feature set.
The Advanced Power Management and PUIS features can be enabled or disabled using the SET
FEATURES command.
The Power Management feature set includes the following commands:
•
•
•
•
•
•
CHECK POWER MODE
IDLE
IDLE IMMEDIATE
SLEEP
STANDBY
STANDBY IMMEDIATE
5.3
Security Mode Feature Set
The Intel SSD 530 Series supports the ATA Security Feature Set, which consists of:
•
•
•
•
SECURITY SET PASSWORD
SECURITY UNLOCK
SECURITY ERASE PREPARE
SECURITY ERASE UNIT
−
−
Normal Mode – Full NAND erase of user available space and spare area
Enhanced Mode – Cryptographically erase data
•
•
SECURITY FREEZE LOCK
SECURITY DISABLE PASSWORD
September 2013
Order Number: 329213-002US
Product Specification
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
5.4
SMART Command Set
The Intel SSD 530 Series supports the SMART command set, which consists of:
•
•
•
•
•
•
•
•
•
•
SMART READ DATA
SMART READ ATTRIBUTE THRESHOLDS
SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
SMART SAVE ATTRIBUTE VALUES
SMART EXECUTE OFF-LINE IMMEDIATE
SMART READ LOG SECTOR
SMART WRITE LOG SECTOR
SMART ENABLE OPERATIONS
SMART DISABLE OPERATIONS
SMART RETURN STATUS
5.4.1
SMART Attributes
Table 12 lists the SMART attributes supported by the Intel SSD 530 Series; Table 13 lists the
corresponding status flags and threshold settings.
Table 12: SMART Attributes
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count).
05h
1
1
0
0
1
0
0 (none)
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hours reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
09h
1
1
0
0
1
0
0 (none)
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
0Ch
1
1
0
0
1
0
0 (none)
Product Specification
20
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
AAh
ABh
1
1
0
0
1
1
10
Available Reserved Space
Program Fail Count
The raw value of this attribute shows total
count of program fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable program fails.
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)
Erase Fail Count
The raw value of this attribute shows total
count of erase fails and the normalized
value, beginning at 100, shows the percent
remaining of allowable erase fails.
ACh
0 (none)
Unexpected Power Loss
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device.
An unsafe shutdown occurs whenever the
device is powered off without STANDBY
IMMEDIATE being the last command
AEh
B7h
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)
0 (none)
SATA Downshift Count
The count of the number of times SATA
interface selected lower signaling rate due
to error.
End-to-End Error Detection Count
Reports number of errors encountered
during end-to-end error detection within the
SSD data path.
B8h
BBh
1
1
1
1
0
0
0
0
1
1
1
0
90
Uncorrectable Error Count
The raw value shows the count of errors that
could not be recovered using Error
Correction Code (ECC).
0 (none)
Temperature
Reports real-time temperature of drive as
measured by temperature sensor on drive PCB.
The normalized value reports the current
temperature value. The raw value shows current,
lifetime highest and lifetime lowest
temperatures. Byte 1:0 = current temp Celsius;
Byte 3:2 = lifetime highest temp Celsius; Byte
5:4 = lifetime lowest temp Celsius.
Power-Off Retract Count (Unsafe Shutdown
Count)
BEh
1
1
0
0
1
0
0 (none)
The raw value of this attribute reports the
cumulative number of unsafe (unclean)
shutdown events over the life of the device. An
unsafe shutdown occurs whenever the device is
powered off without STANDBY IMMEDIATE being
the last command.
CRC Error Count
The total number of encountered SATA interface
cyclic redundancy check (CRC) errors.
C0h
C7h
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)
0 (none)
September 2013
Order Number: 329213-002US
Product Specification
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
ID
Attribute
Status Flags
Threshold
SP
EC
ER
PE
OC
PW
Host Writes
The raw value of this attribute reports the total
number of sectors written by the host system.
The raw value is increased by 1 for every 65,536
sectors (32 MB) written by the host.
Timed Workload Media Wear
Measures the wear seen by the SSD (since reset
of the workload timer, attribute E4h), as a
percentage of the maximum rated cycles.
Timed Workload Host Read/Write Ratio
Shows the percentage of I/O operations that are
read operations (since reset of the workload
timer, attribute E4h).
E1h
E2h
1
1
0
0
1
0
0 (none)
0 (none)
1
1
0
0
1
0
E3h
E4h
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)
0 (none)
Timed Workload Timer
Measures the elapsed time (number of minutes
since starting this workload timer).
Available Reserved Space
This attribute reports the number of reserve
blocks remaining. The normalized value begins at
100 (64h), which corresponds to 100 percent
availability of the reserved space. The threshold
value for this attribute is 10 percent availability.
Media Wearout Indicator
E8h
1
1
0
0
1
1
10
This attribute reports the number of cycles the
NAND media has undergone. The normalized value
declines linearly from 100 to 1 as the average
erase cycle count increases from 0 to the
maximum rated cycles.
Once the normalized value reaches 1, the number
will not decrease, although it is likely that
significant additional wear can be put on the
device.
E9h
F1h
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)
Total LBAs Written
The raw value of this attribute reports the total
number of sectors written by the host system.
The raw value is increased by 1 for every 65,536
sectors (32 MB) written by the host.
Total LBAs Read
0 (none)
The raw value of this attribute reports the total
number of sectors read by the host system. The
raw value is increased by 1 for every 65,536
sectors (32 MB) read by the host.
Total NAND Writes
Raw value reports the number of writes to NAND
in 1 GB increments.
F2h
F9h
1
1
1
1
0
0
0
0
1
1
0
0
0 (none)
0 (none)
Product Specification
22
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Table 13: SMART Attribute Status Flags
Status Flag
Description
Value = 0
Value = 1
SP
EC
ER
PE
Self-preserving attribute
Event count attribute
Error rate attribute
Not a self-preserving attribute
Not an event count attribute
Not an error rate attribute
Not a performance attribute
Collected only during offline
activity
Self-preserving attribute
Event count attribute
Error rate attribute
Performance attribute
Collected during both
offline and online activity
Pre-fail
Performance attribute
OC
PW
Online collection attribute
Pre-fail warranty attribute
Advisory
5.4.2
SMART Logs
The Intel SSD 530 Series implements the following Log Addresses: 00h, 02h, 03h, 06h, and 07h.
The Intel SSD 530 Series implements host vendor specific logs (addresses 80h-9Fh) as read and write
scratchpads, where the default value is zero (0). Intel SSD 530 Series does not write any specific
values to these logs unless directed by the host through the appropriate commands.
The Intel SSD 530 Series also implements a device vendor specific log at address A9h as a read-only
log area with a default value of zero (0).
5.5
Device Statistics
In addition to the SMART attribute structure, statistics pertaining to the operation and health of the
Intel SSD 530 Series can be reported to the host on request through the Device Statistics log as
defined in the ATA specification.
The Device Statistics log is a read-only GPL/SMART log located at read log address 0x04 and is
accessible using READ LOG EXT, READ LOG DMA EXT or SMART READ LOG commands.
The table below lists the Device Statistics supported by the Intel SSD 530 Series.
Table 14: Device Statistics Log
Page
Offset
Description
Equivalent SMART attribute if applicable
0x00
-
List of Supported Pages
Power Cycle Count
Power-On Hours
Logical Sectors Written
Logical Sectors Read
Num Reported Uncorrectable
Errors
Num Resets Between
Command Acceptance and
Completion
-
0x08
0x10
0x18
0x28
0Ch
09h
E1h
F2h
0x01 - General
Statistics
0x08
BBh
0x04 - General
Errors Statistics
0x10
-
0x08
0x10
0x18
Num Hardware Resets
Num ASR Events
Num Interface CRC Errors
-
-
-
0x06 -
Transport
Statistics
E9h
0x07 - Solid
State Device
Statistics
Percentage Used Endurance
Indicator
This statistic counts up from 0 rather than down
from 100, and may go beyond 100 for drives that
exceed their expected lifetime.
0x08
September 2013
Order Number: 329213-002US
Product Specification
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
5.6
SMART Command Transport
With SMART Command Transport (SCT), a host can send commands and data to an SSD and receive
status and data from an SSD using standard write/read commands to manipulate two SMART Logs:
•
•
Log Address E0h ("SCT Command/Status") — used to send commands and retrieve status
Log Address E1h ("SCT Data Transfer") — used to transport data
5.7
Data Set Management Command Set
The Intel SSD 530 Series supports the Data Set Management command set Trim attribute, which
consists of:
•
DATA SET MANAGEMENT
5.8
Host Protected Area Command Set
•
•
•
•
READ NATIVE MAX ADDRESS
SET MAX ADDRESS
READ NATIVE MAX ADDRESS EXT
SET MAX ADDRESS EXT
5.9
48-Bit Address Command Set
The Intel SSD 530 Series supports the 48-bit Address command set, which consists of:
•
•
•
•
•
•
•
•
•
•
FLUSH CACHE EXT
READ DMA EXT
READ NATIVE MAX ADDRESS
READ NATIVE MAX ADDRESS EXT
READ SECTOR(S) EXT
READ VERIFY SECTOR(S) EXT
SET MAX ADDRESS EXT
WRITE DMA EXT
WRITE MULTIPLE EXT
WRITE SECTOR(S) EXT
5.10
General Purpose Log Command Set
The Intel SSD 530 Series supports the General Purpose Log command set, which consists of:
•
•
•
•
READ LOG EXT
WRITE LOG EXT
READ LOG DMA EXT
WRITE LOG DMA EXT
5.11
Native Command Queuing
•
•
READ FPDMA QUEUED
WRITE FPDMA QUEUED
Product Specification
24
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
5.12
Software Settings Preservation
The Intel SSD 530 Series supports the SET FEATURES parameter to enable/disable the preservation of
software settings.
5.13
SATA Link Power Management (LPM)
The Intel SSD 530 Series supports the SET FEATURES parameter to enable Device Initiated Power
Management (DIPM). The SSD also supports Host Initiated Power Management (HIPM).
September 2013
Order Number: 329213-002US
Product Specification
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
6 Certifications and Declarations
The table below describes the Device Certifications supported by the Intel SSD 530 Series.
Table 15: Device Certifications and Declarations
Certification
Description
European Economic Area (EEA): Compliance with the essential requirements of EC
Council Directives Low Voltage Directive (LVD) 2006/95/EC, EMC Directive
2004/108/EC and Directive 2011/65/EU.
CE Compliant
Certified Underwriters Laboratories, Inc. Bi-National Component Recognition; UL
60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment - Safety - Part
1: General Requirements)
UL Certified
CSA C22.2 No. 60950-1-07, 2nd Edition, 2007-03 (Information Technology
Equipment - Safety - Part 1: General Requirements)
Compliance with the Australia/New Zealand Standard AS/NZS3548 and
Electromagnetic Compatibility (EMC) Framework requirements of the Australian
Communication Authority (ACA).
C-Tick Compliant
BSMI Compliant
Compliance to the Taiwan EMC standard CNS 13438: Information technology
equipment - Radio disturbance Characteristics - limits and methods of measurement,
as amended on June 1, 2006, is harmonized with CISPR 22: 2005.04.
Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility
Control Regulation and meets the Electromagnetic Compatibility (EMC) Framework
requirements of the Radio Research Laboratory (RRL) Ministry of Information and
Communication Republic of Korea.
KCC
Microsoft WHCK
RoHS Compliant
Microsoft Windows Hardware Certification Kit
Restriction of Hazardous Substance Directive
Voluntary Control Council for Interface to cope with disturbance problems caused by
personal computers or facsimile.
VCCI
SATA-IO
Indicates certified logo program from Serial ATA International Organization.
Applies only to brominated and chlorinated flame retardants (BFRs/CFRs) and PVC in
the final product. Intel components as well as purchased components on the finished
assembly meet JS-709 requirements, and the PCB/substrate meet IEC 61249-2-21
requirements. The replacement of halogenated flame retardants and/or PVC may not
be better for the environment.
Low Halogen
Product Specification
26
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
7 Appendix
The table below describes the sector data returned from an identify device command
Table 16: Identify Device Returned Sector Data
Word
F = Fixed
V = Variable
X = Both
Default Value
Description
0
1
2
3
F
0040h
General configuration bit-significant information
Obsolete - Number of logical cylinders (16,383)
Specific configuration
X
3FFFh
C837h
0010h
0h
V
X
X
X
Obsolete - Number of logical heads (16)
Retired
4-5
6
003Fh
Obsolete - Number of logical sectors per logical track (63)
Reserved for assignment by the CompactFlash* Association
(CFA)
7-8
V
0h
9
X
F
X
X
F
F
0h
Retired
10-19
20-21
22
varies
0h
Serial number (20 ASCII characters)
Retired
0h
Obsolete
23-26
27-46
varies
varies
Firmware revision (8 ASCII characters)
Model number (Intel® Solid-State Drive)
7:0—Maximum number of sectors transferred per interrupt
on multiple commands
47
F
8010h
48
F
4000h
2F00h
4000h
0h
Reserved
49
F
Capabilities
50
F
Capabilities
51-52
53
X
F
Obsolete
0007h
3FFFh
0010h
003Fh
00FBFC10h
Words 88 and 70:64 valid
54
X
X
X
X
Obsolete - Number of logical cylinders (16,383)
Obsolete - Number of logical heads (16)
Obsolete - Number of logical sectors per logical track (63)
Obsolete
55
56
57-58
Number of sectors transferred per interrupt on multiple
commands
59
V
0110h
60-61
62
F
X
F
F
F
varies
0h
Total number of user-addressable sectors
Obsolete
63
0007h
0003h
0078h
Multi-word DMA modes supported/selected
PIO modes supported
64
65
Minimum multiword DMA transfer cycle time per word
Manufacturer’s recommended multiword DMA transfer cycle
time
66
F
0078h
67
68
69
F
F
F
0078h
0078h
4010h
Minimum PIO transfer cycle time without flow control
Minimum PIO transfer cycle time with IORDY flow control
Additional Supported
September 2013
Order Number: 329213-002US
Product Specification
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Word
F = Fixed
V = Variable
X = Both
Default Value
Description
70
F
0h
0h
Reserved
71-74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
F
F
F
F
F
V
F
F
F
F
F
V
V
V
V
F
F
V
V
Reserved for IDENTIFY PACKET DEVICE command
Queue depth
001Fh
270Eh
0086h
054Ch
0040h
03FCh
FFFFh
746Bh
7429h
6163h
7469h
B409h
6163h
407Fh
0002h
0001h
00FEh
FFFEh
Serial ATA capabilities
Reserved for future Serial ATA definition
Serial ATA features supported
Serial ATA features enabled
Major version number
Minor version number
Command set supported
Command sets supported
Command set/feature supported extension
Command set/feature enabled
Command set/feature enabled
Command set/feature default
Ultra DMA Modes
Time required for security erase unit completion
Time required for enhanced security erase completion
Current advanced power management value
Master Password Revision Code
Hardware reset result: the contents of bits (12:0) of this
93
F
0h
word shall change only during the execution of a hardware
reset
Vendor’s recommended and actual acoustic management
value
94
V
0h
95
F
V
V
F
V
V
F
F
0h
Stream minimum request size
Streaming transfer time - DMA
Streaming access latency - DMA and PIO
Streaming performance granularity
Maximum user LBA for 48-bit address feature set
Streaming transfer time - PIO
96
0h
97
0h
98-99
100-103
104
0h
varies
0h
105
0001h
4000h
Reserved
106
Physical sector size / logical sector size
Inter-seek delay for ISO-7779 acoustic testing in
microseconds
107
F
0h
108-111
112-115
116
F
F
V
F
F
varies
0h
Unique ID
Reserved for world wide name extension to 128 bits
Reserved for technical report
Words per logical sector
0h
117-118
119
0h
401Ch
Supported settings
Product Specification
28
September 2013
Order Number: 329213-002US
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® Solid-State Drive 530 Series (M.2)
Word
F = Fixed
V = Variable
X = Both
Default Value
Description
120
F
401Ch
Command set/feature enabled/supported
Reserved
121-126
127
F
0h
F
0h
Removable Media Status Notification feature set support
Security status
128
V
X
F
0021h
varies
0h
129-159
160
Vendor-specific
CompactFlash Association (CFA) power mode 1
Reserved for assignment by the CFA
Data set management Trim attribute support
Additional Product Identifier
Reserved
161-168
169
X
X
F
0h
0001h
0h
170-173
174-175
176-205
206
F
0h
V
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
0h
Current media serial number
SCT Command Transport
0025h
0h
207-208
209
Reserved
4000h
0h
Alignment of logical blocks within a physical block
Write-Read-Verify Sector Count Mode 3 (DWord)
Write-Read-Verify Sector Count Mode 2 (DWord)
NV Cache Capabilities
210-211
212-213
214
0h
0h
215-216
217
0h
NV Cache Size in Logical Blocks (DWord)
Nominal media rotation rate
Reserved
0001h
0h
218
219
0h
NV Cache Options
220
0h
Write-Read-Verify feature set
Reserved
221
0h
222
103Fh
0h
Transport major version number
Transport minor version number
Reserved
223
224-229
230-233
0h
0h
Extended Number of User Addressable Sectors (QWord)
Minimum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
Maximum number of 512-byte data blocks per DOWNLOAD
MICROCODE command for mode 03h
234
235
X
X
0002h
0400h
236-254
255
X
X
0h
Reserved
varies
Integrity word
Note:
F = Fixed. The content of the word is fixed and does not change. For removable media devices, these values
may change when media is removed or changed.
V = Variable. The state of at least one bit in a word is variable and may change depending on the state of the
device or the commands executed by the device.
X = F or V. The content of the word may be fixed or variable.
September 2013
Order Number: 329213-002US
Product Specification
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|