Integra CD Player DPC 75 User Manual

Contents

Important Safety Instructions............3

DVD Changer

Precautions .......................................4

Introduction .......................................6

Controls & Connectors ...................10

Before Using the DPC-7.5 ...............15

Connecting the DPC-7.5 ................16

DPC-7.5

Instruction Manual

Powering Up & Setting Up the

DPC-7.5 .........................................21

Basic Playback ...............................22

Advanced Playback ......................32

Conﬁguring the DPC-7.5 ................39

Troubleshooting ..............................46

Speciﬁcations .................................48

Thank you for purchasing an Integra DPC-7.5 DVD Changer.

Read this manual carefully before using your new DVD

Changer.A good understanding of its features and opera-

tion will allow you to achieve optimum performance and

enjoyment.

Keep this manual for future reference.

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNING:

WARNING

AVIS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat reg-

isters, stoves, or other apparatus (including ampliﬁers) that pro-

duce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are pro-

vided for your safety. If the provided plug does not ﬁt into your

outlet, consult an electrician for replacement of the obsolete

outlet.

10. Protect the power cord from being walked on or pinched partic-

ularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

15. Damage Requiring Service

Unplug the apparatus from the wall outlet and refer servicing to

qualiﬁed service personnel under the following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into the

apparatus,

C. If the apparatus has been exposed to rain or water,

D. If the apparatus does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualiﬁed technician to restore

the apparatus to its normal operation,

E. If the apparatus has been dropped or damaged in any way,

and

F. When the apparatus exhibits a distinct change in perfor-

mance this indicates a need for service.

16. Object and Liquid Entry

Never push objects of any kind into the apparatus through

openings as they may touch dangerous voltage points or short-

out parts that could result in a ﬁre or electric shock.

The apparatus shall not be exposed to dripping or splashing and

no objects ﬁlled with liquids, such as vases shall be placed on

the apparatus.

11. Only use attachments/accessories speciﬁed by the manufac-

turer.

12. Use only with the cart, stand, tripod,

Don’t put candles or other burning objects on top of this unit.

PORTABLE CART WARNING

17. Batteries

bracket, or table speciﬁed by the manu-

facturer, or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

Always consider the environmental issues and follow local reg-

ulations when disposing of batteries.

18. If you install the apparatus in a built-in installation, such as a

bookcase or rack, ensure that there is adequate ventilation.

Leave 20 cm (8") of free space at the top and sides and 10 cm

(4") at the rear. The rear edge of the shelf or board above the

apparatus shall be set 10 cm (4") away from the rear panel or

wall, creating a ﬂue-like gap for warm air to escape.

13. Unplug this apparatus during lightning

S3125A

storms or when unused for long periods

of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate nor-

mally, or has been dropped.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions

FCC INFORMATION FOR USER

CAUTION:

The user changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s authority

to operate the equipment.

DANGER:

VISIBLE AND INVISIBLE LASER RADIATION WHEN

OPENAND INTERLOCK FAILED OR DEFEATED. DO NOT

STARE INTO BEAM.

CAUTION:

THIS PRODUCT UTILIZESA LASER. USE OF CONTROLS

OR ADJUSTMENTS OR PERFORMANCE OF PROCE-

DURES OTHER THAN THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIATION EXPOSURE.

NOTE:

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

This unit contains a semiconductor laser system and is classiﬁed

as a “CLASS 1 LASER PRODUCT.” So, to use this model prop-

erly, read this Instruction Manual carefully. In case of any trou-

ble, please contact the store where you purchased the unit. To

prevent exposure to the laser beam, do not try to open the enclo-

sure.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

In some cases, this label is located on the rear panel. It indicates

that:

1. This unit is a CLASS 1 LASER PRODUCT and employs a

laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove the

cover. Refer servicing to qualiﬁed personnel.

For Canadian model

For models having a power cord with a polarized plug:

For U.S. model

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

The laser is covered by a housing which prevents exposure dur-

ing operation or maintenance. However, this product is classi-

ﬁed as a Laser Product by CDRH (Center for Devices and

Radiological Health) which is a department of the Food and

Drug Administration.

NOTE:This Class B digital apparatus complies with Canadian

ICES-003.

According to their regulations 21 CFR section 1002.30, all man-

ufactures who sell Laser Products must maintain records of writ-

ten communications between the manufacturer, dealers and

customers concerning radiation safety. If you have any com-

plaints about instructions or explanations affecting the use of

this product, please feel free to write to the address on the back

page of this manual. When you write us, please include the

model number and serial number of your unit.

Modèle canadien

Sur les modèles dont la ﬁche est polarisée:

ATTENTION: POUR ÉVITER LES CHOCS ÉLEC-

TRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA

PRISE ET POUSSER JUSQU’AU FOND.

REMARQUE: CET APPAREIL NUMÉRIQUE DE LA

CLASSE B EST CONFORME À LA NORME NMB-003 DU

CANADA.

In compliance with Federal Regulations, the certiﬁcation, iden-

tiﬁcation and the period of manufacture are indicated on the rear

panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Precautions—Continued

1. Region Numbers

7. Care

The DVD standard uses region numbers to control how discs can

be played around the world, the world being divided into six

regions. This unit will only play DVD discs that match its region

Occasionally, you should dust this unit all over with a soft cloth.

For stubborn stains, use a soft cloth dampened with a weak solu-

tion of mild detergent and water. Dry the unit immediately after-

wards with a clean cloth. Do not use abrasive cloths, thinners,

alcohol, or other chemical solvents, because they may damage

the ﬁnish or remove the panel lettering.

number, which can be found on its rear panel (e.g.,

2. About this Manual

This manual explains how to use all of this unit’s functions.

Although the DVD standard offers many special features, not all

discs use them all, so depending on the disc being played, this

unit may not respond to certain functions. See the disc’s sleeve

notes for supported features.

8. Handling Notes

• If you need to transport this unit, use the original packaging to

pack it how it was when you originally bought it.

• Do not use volatile liquids, such as insect sprays, near this

unit. Do not leave rubber or plastic items on this unit for a long

time, because they may leave marks on the case.

• This unit’s top and rear panels may get warm after prolonged

use. This is normal.

When you attempt to use a DVD feature that is not

available, this logo may appear onscreen, indicating

that the feature is not supported by the current disc or

this unit.

• When you’ve ﬁnished using this unit, remove all discs and

turn off the power.

3. Recording Copyright

• If you do not use this unit for a long time, it may not work

properly the next time you turn it on, so be sure to use it occa-

sionally.

Unless it’s for personal use only, recording copyrighted material

is illegal without the permission of the copyright holder.

4. Power

9.To Obtain a Clear Picture

WARNING

This unit is a high-tech, precision device. If the lens on the opti-

cal pickup, or the disc drive mechanism becomes dirty or worn,

the picture quality may be affected. To maintain the best picture

quality, we recommend regular inspection and maintenance

(cleaning or worn part replacement) every 1,000 hours of use

depending on the operating environment. Contact your Integra/

Onkyo dealer for details.

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,

READ THE FOLLOWING SECTION CAREFULLY.

AC outlet voltages vary from country to country. Make sure that

the voltage in your area meets the voltage requirements printed

on this unit’s rear panel (e.g., AC 120 V, 60 Hz).

5. Never Touch this Unit with Wet Hands

10. Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

Never handle this unit or its power cord while your hands are

wet or damp. If water or any other liquid gets inside this unit,

have it checked by your Integra/Onkyo dealer.

When you take a glass containing a cold drink outside on a sum-

mer’s day, drops of water, called condensation, form on the out-

side of the glass. Similarly, moisture may condense on the lens

of the optical pickup, one of the most important parts inside this

unit.

6. Installing this Unit

• Install this unit in a well-ventilated location.

Ensure that there’s adequate ventilation all around this unit,

especially if it’s installed in an audio rack. If the ventilation is

inadequate, the unit may overheat, leading to malfunction.

• Moisture condensation can occur in the following situations:

— The unit is moved from a cold place to a warm place.

• Do not expose this unit to direct sunlight or heat sources,

because its internal temperature may rise, shortening the life

of the optical pickup.

• Avoid damp and dusty places, and places subject to vibrations

from loudspeakers. Never put the unit on top of, or directly

above a loudspeaker.

— A heater is turned on, or cold air from an air conditioner is

hitting the unit.

— In the summer, when this unit is moved from an air condi-

tioned room to a hot and humid place.

• Install this unit horizontally. Never use it on its side or on a

sloping surface, because it may cause a malfunction.

• If you install this unit near aTV, radio, orVCR, the picture and

sound quality may be affected. If this occurs, move this unit

away from the TV, radio, or VCR.

— The unit is used in a humid place.

• Do not use this unit when there’s the possibility of moisture

condensation occurring. Doing so may damage your discs and

certain parts inside this unit.

If condensation does occur, remove all discs and leave this

unit turned on for two to three hours. By this time, the unit will

have warmed up and any condensation will have evaporated.

To reduce the risk of condensation, keep this unit connected to

a wall outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Supplied Accessories

DPC-7.5 Features

Make sure you have the following accessories:

Highlights

• Dolby Digital and DTS

• Holds up to six discs

• Chain mode for successive disc playback

• DVD-Video/Video CD/Audio CD playback

• MP3/WMA playback

• JPEG picture display and slideshow

• CD-R, CD-RW (Video CD, audio CD, MP3/WMA/JPEG)

• DVD-R, DVD-RW (DVD-Video)

Remote controller (RC-543DV) & 2 batteries (AA/R6)

• Vector Linear Shaping Circuitry

Video

• Advanced 54 MHz/10-bit video D/A converter

• Component video output

• S-Video and composite video outputs

• Title, chapter, track, or time search

• Pause/Still setting for enhanced display of single frames

• Frame-by-frame playback

• Slow motion playback (four speeds)

• Fast forward and reverse (ﬁve speeds)

• Last Memory function allows you to resume playback from a

speciﬁc point on a DVD-Video or Video CD, even if that disc

has been removed from the DPC-7.5

AV connecting cable (RCA/phono)

S-Video connecting cable

• Repeat playback options include: Chapter, Title, 1 Disc, All

Discs, Track, and Folder (MP3/WMA)

• Random playback options include: Title, 1 Disc, All Discs,

and Folder (MP3/WMA)

cable

• Supports 4:3 and 16:9 aspect ratio TVs

• Supports up to 8 soundtracks/languages

• Supports up to 32 subtitle languages

• Multiple camera angle support

• Parental Lock function

• Screen Saver function

Audio

Power cord

Shape may vary depending on the area which it was purchased.

• Audiophile-class performance

• Direct digital path

• 192 kHz/24-bit D/A converter

• Coaxial digital output

• Optical digital output

• Analog output

Others

• Heavy-duty power cord

• Load discs without stopping playback

• Dynamic Range Control setting

• Adjustable display brightness

*1. Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

*2. “DTS” and “DTS Digital Out” are trademarks of Digital Theater Sys-

tems, Inc.

*3.

Windows Media, and the Windows logo are trademarks,

or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Xantech is a registered trademark of Xantech Corporation.

Niles is a registered trademark of Niles Audio Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction—Continued

DVD Region Numbers

Disc Notes

The North American DPC-7.5 supports only Region 1

DVD-Videos bearing this logo.

Supported Discs

The DPC-7.5 supports the following discs.

The Australian DPC-7.5 supports only Region 4

DVD-Videos bearing this logo.

Disc

Logo

Format or ﬁle type

If you attempt to play a disc intended for another region, the

message “Cannot play discs with this region code” appears

onscreen.

DVD-Video

DVD-R

DVD-Video

Function Support

The following icons are used throughout this manual to indicate

which functions can be used with the various disc formats and

ﬁle types.

DVD-RW

Video CD

DVD-Video

Icon

Disc format or ﬁle type

Version 1.1 and 2.0

PCM and DTS

DVD

DVD-Video

VCD

Video CD

Audio CD

MP3 ﬁle

Audio CD

Video CD, audio CD,

MP3, WMA, JPEG

CD-R

MP3

WMA

JPEG

WMA ﬁle

JPEG ﬁle

Video CD, audio CD,

MP3, WMA, JPEG

CD-RW

JPEG CD

JPEG

Unsupported DVD Features

*1. The North American model will only play Region 1, NTSC DVD-Vid-

eos. The Australian model will only play Region 4, PAL DVD-Videos,

although it can be set to AUTO, in which case it will also play Region 4

NTSC DVD-Videos (see page 41).

*2. Some audio CDs feature copy protection that doesn’t conform to the

ofﬁcial CD standard. Since these are nonstandard discs, they may not

play properly in the DPC-7.5.

*3. The DPC-7.5 supports CD-R and CD-RW discs recorded in Video CD

format, audio CD format, or ISO9660 Level 2 format with MP3, WMA,

and JPEG ﬁles. It also supports DVD-R and DVD-RW discs recorded

in DVD-Video format. However, some CD-R, CD-RW, DVD-R, and

DVD-RW discs may not work properly for any of the following reasons:

incomplete disc ﬁnalization, disc burner characteristics, disc character-

istics, the disc is damaged or dirty. See the manual supplied with your

disc burner for more information. Condensation or dirt on the optical

pickup lens can also affect playback.

The DVD standard offers many special features,

including multiple soundtracks, subtitles, camera

angles, and so on. However, not all discs employ all of

these features. When you attempt to use a feature that is not used

by the current disc, for example, you press the remote control-

ler’s [AUDIO] button while playing a disc with only one

soundtrack, this icon will appear onscreen, indicating that the

feature is not supported by the current disc.

Similarly, if a disc uses features that are not supported

by the DPC-7.5, for example, special interactive menu

functions, this icon will appear onscreen, indicating

that the feature is not supported by the DPC-7.5.

Disc Content Organization

• The DPC-7.5 does not support disc types not listed.

• The DPC-7.5 supports 8 cm and 12 cm discs.

• Don’t use discs with an unusual shape, such as those shown

below, because you may damage the DPC-7.5.

■ DVD-Video Format

DVD-Videos contain titles, which are usually subdivided into

chapters.

Title 1

Chapter 1 Chapter 2

Title 2

Chapter 1 Chapter 2

DVD-Video

• Don’t use discs that have residue from adhesive tape, rental

discs with peeling labels, or discs with custom-made labels or

stickers. Doing so may damage the DPC-7.5 and you may not

be able to remove the disc properly.

■ Video CD Format

Video CDs contain tracks.

Track 1

Track 2

Track 3

Track 4

About playing copy-controlled CDs

Some copy-controlled CDs may not conform to ofﬁcial CD stan-

“

”

dards. They are special discs and may not play on the DPC-7.5.

Video CD

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction—Continued

■ Audio CD Format

■ MP3

Audio CDs contain tracks.

• MP3 ﬁles must be MPEG1 Audio Layer 3 format, 44.1 or

48 kHz, ﬁxed bit-rate.

Track 1

Track 2

Track 3

Track 4

Track 5

• MP3 ﬁles must have a “.mp3” or “.MP3” ﬁlename extension.

• Variable bit-rates (VBR) from 64 kbps to 384 kbps are sup-

ported. (Playing times may display incorrectly with VBR.)

Audio CD

■ WMA

■ MP3/WMA Files

• WMA ﬁles must have the copyright option turned off.

• Sampling rates 44.1/48 kHz are supported.

• Variable bit-rates (VBR) from 16 kbps to 192 kbps are sup-

ported. (Playing times may display incorrectly with VBR.)

• WMA ﬁles must have a “.wma” or “.WMA” or “.ASF” ﬁle-

name extension.

MP3 and WMA ﬁles are typically organized into folders. The

DPC-7.5 handles MP3 and WMA ﬁles as tracks.

Folder 1

Track 2

Folder 2

Track 1

Track 3

Track 1 Track 2

■ JPEG

MP3/WMA (CD-R/CD-RW)

• JPEG ﬁles must have a “.jpg” or “.JPG” or “.JPEG” ﬁlename

extension.

■ JPEG Files

JPEG picture ﬁles are typically organized into folders. The

DPC-7.5 handles JPEG ﬁles as tracks.

• Baseline JPEG ﬁles are supported. Progressive JPEG ﬁles are

not.

• Only JPEG ﬁles with the following brightness/color differ-

ence ratios are supported: 4:4:4, 4:2:2, and 4:1:1.

• JPEG ﬁles must be less than 5 megabytes in size.

Folder 1

Track 2

Folder 2

Track 1 Track 2

Track 1

Track 3

Handling Discs

JPEG (CD-R/CD-RW)

• Never touch the underside of a disc. Always hold discs by the

edge, as shown.

Video CDs

The DPC-7.5 supports Version 1.1 and Version 2.0 of the Video

CD standard. Version 2.0 supports PBC (Playback Control).

• Video CD (Version 1.1)

The contents of Video CDs that conform to Version 1.1 of the

Video CD standard are played as tracks.

• Video CD with PBC (Version 2.0)

In addition to the functions supported by Version 1.1, Version

2.0 offers playback control via interactive menus and search

functions. Note that the DPC-7.5 doesn’t support all Video

CD PBC functions.

Underside

• Never attach adhesive tape or sticky labels to discs.

MP3/WMA/JPEG Compatibility

• The DPC-7.5 can play/display MP3, WMA, and JPEG ﬁles

recorded on CD-R and CD-RW discs.

• Discs must be in ISO9660 Level 2 format (folders can be up

to eight levels deep).

Cleaning Discs

• For best results, keep your discs clean. Fingerprints and dust

can affect the sound and picture quality and should be

• Discs must be ﬁnalized.

removed as follows. Using a clean soft cloth, wipe from the

center outwards, as shown. Never wipe in a circular direction.

• The DPC-7.5 can only recognize the ﬁrst session on multises-

sion discs.

• You can determine the order in which the DPC-7.5 plays/dis-

plays your MP3/WMA songs and JPEG pictures by preﬁxing

ﬁle and folder names with a three-digit number. For example

001.Root, 002.Folder, and so on, and 001.Track.mp3,

002.Track.mp3, and so on.

• Only the ﬁrst eight characters of folder and track names

(excluding the ﬁlename extension) are displayed.

• The folder numbered “001” appears as “ROOT” in the Disc

Navigator.

• The DPC-7.5 supports up to 999 folders and up to 672 ﬁles per

folder.

• If you try to play an incompatible ﬁle, the message “This for-

mat cannot be played” appears on the display.

✔

• To remove stubborn dust or dirt, wipe the disc with a damp

soft cloth, and then dry it with a dry cloth.

• Never use solvent-based cleaning ﬂuids, such as thinner or

benzine, commercially available cleaners, or antistatic sprays

intended for vinyl records, because they may damage the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction—Continued

■ DVD-RW (DVD rewritable): A type of DVD disc that can be

recorded many times. Can be used to make DVD-Videos or to

store computer data.

Storing Discs

• Don’t store discs in places subject to direct sunlight, or near

heat sources.

• Don’t store discs in places subject to moisture or dust, such as

in a bathroom or near a humidiﬁer.

• Always store discs in their cases and vertically. Stacking, or

putting objects on unprotected discs may cause warping,

scratches, or other damage.

■ DVD-Video: The format for storing movies on DVD, with

interactive menus, multiple language soundtracks, subtitles,

camera angles, and so on.

■ Field: In interlaced scanning, a ﬁeld is a single scan of the

screen. There are two ﬁelds per frame.

■ Frame: An individual TV picture is called a frame. With the

NTSC color system there are 30 frames per second.

It is forbidden by law to copy, broadcast, show, broadcast on

cable, play in public, or rent copyrighted material without per-

mission.

■ Interlaced scanning: TV pictures are made by scanning

the screen in horizontal lines from top to bottom.With Interlaced

scanning, two scans (ﬁelds) are used to make each picture

(frame). Contrast with Progressive scanning.

DVD-Videos are copy-protected, and any recordings made from

these discs will be distorted.

■ JPEG (Joint Photographic Experts Group): The com-

This product incorporates copyright protection technology that

is protected by method claims of certain U.S. patents and other

intellectual property rights owned by Macrovision Corporation

and other rights owners. Use of this copyright-protection tech-

nology must be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only, unless

otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

pressed ﬁle format used to store digital photos.

■ LFE (low-frequency effects): The surround-sound chan-

nel used for low-frequency effects.

■ Linear PCM: The uncompressed digital audio format used

for audio CDs. PCM stands for Pulse Code modulation.

■ MP3 (MPEG 1 Audio Layer 3): Popular compressed ﬁle

format for storing digital music.

■ MPEG1 (Moving Picture Experts Group 1): The com-

pressed digital video format used for Video CDs.

DPC-7.5-related Terminology

■ MPEG2 (Moving Picture Experts Group 2): The com-

pressed digital video format used for DVD-Videos, offering bet-

ter picture quality than MPEG1.

■ CD-R (compact disc recordable): A type of CD that can

be recorded only once. Can be used to make Video-CDs, audio

CDs, or MP3/WMA/JPEG discs.

■ NTSC: The color TV system used in the United States,

Japan, Taiwan, and Korea.

■ CD-RW (compact disc rewritable): A type of CD that can

be recorded many times. Can be used to makeVideo-CDs, audio

CDs, MP3/WMA/JPEG discs.

■ PAL: The color TV system used in most of Europe, the

United Kingdom, Australia, Brazil, and China.

■ Chapter: Titles on DVD-Videos can be subdivided into

chapters.

■ PBC (Playback Control): Version 2.0 of the Video CD

standard supports interactive menus and search functions.

■ Component video: A video connection format that sepa-

rates the luminance (Y) and color difference signals (P^R, P^B),

providing better picture quality than S-Video.

■ Progressive scanning: TV pictures are made by scanning

the screen in horizontal lines from top to bottom. With progres-

sive scanning, each picture (frame) is made by scanning the

entire screen in one go, resulting is a clearer and stabler picture.

Contrast with Interlaced scanning.

■ Composite video: A video connection format that mixes

the luminance and color signals together.

■ Dolby Digital: The multi-channel digital surround sound

format used on most DVD-Videos.

■ S-Video: A video connection format that separates the lumi-

nance (Y) and color (C) signals, providing better picture quality

than composite video.

■ Dolby Pro Logic: The four-channel analog surround sound

format that can be encoded in normal stereo soundtracks and

used withVHS video cassettes, analog TV broadcasts, and other

analog stereo systems.

■ Title: Movies on DVD-Video are called titles.

■ Video CD: The format for storing movies on CD.

■ Downmixing: The process of mixing multiple audio chan-

nels into fewer channels. For example, a 5.1-channel surround

mix can be downmixed into two channels for reproduction on

stereo systems.

■ WMA (Windows Media Audio): A compressed ﬁle format

for storing digital music.

■ Downsampling: The process of reducing the sampling rate

of digital audio.

■ DTS (Digital Theater System): The 5.1-channel surround

format that uses less compression for faithful reproduction.

■ DVD-R (DVD recordable): A type of DVD disc that can be

recorded only once. Can be used to make DVD-Videos or to

store computer data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls & Connectors

Front Panel

A B C456

8 9

JKL

Open/Close

Standby/On

Stop

Play

Enter

Chain

Mode

Last Memory Repeat

Dimmer

Display

Disc Skip

Pause

Standby

DPC-7.5

M N

OPQR

For detailed information, refer to the pages in parenthesis.

L Play/Enter button (23)

This button is used to start playback and to cancel fast

forward and fast reverse. It’s also used to start Chain

mode playback.

A Standby/On button (21)

This button is used to set the DPC-7.5 to On or Standby.

B Standby indicator (21)

M Disc tray (22)

This indicator lights up when the DPC-7.5 is in Standby

mode.

The disc tray has six bays for loading up to six discs.

N Disc tray light

C Last Memory button (37)

This light illuminates the disc tray. It comes on when the

DPC-7.5 is turned on, and is brighter while the disc tray

is open.

This button is used with the Last Memory function.

D Repeat button (32)

This button is used with the Repeat function.

O Disc Skip button (22, 23)

E Dimmer button (30)

This button is used to select the disc bays (i.e., rotate the

disc tray) when loading or removing discs, and to select

discs for playback.

This button is used to adjust the display brightness.

F Display button (38)

This button is used to display information about the cur-

rent disc, title, chapter, or track, including the elapsed

time, remaining time, total time, and so on.

P Down [ ] button (26, 27, 29)

This button is used to select the previous chapter or

track. During playback it selects the beginning of the

current chapter or track.

G Display

See “Display” on page 11 for more information.

Q Up [ ] button (26, 27, 29)

This button is used to select the next chapter or track.

H Remote control sensor (15)

This sensor receives control signals from the remote

controller.

R Pause button (23)

This button is used to pause playback.

I Open/Close button (22)

This button is used to open and close the disc tray.

J Chain Mode button (31)

This button is used with the Chain mode function.

K Stop button (23)

This button is used to stop playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls & Connectors—Continued

Display

1 2 3 4 5 6 7 8 9 0A B C

CHAIN MODE DISC

TITLE

CHP TRACK

PRGV LAST

TOTAL REMAIN

ALL

DVD

VCDVD

E F

For detailed information, refer to the pages in parenthesis.

APlay indicator (23)

This indicator is shown during playback.

1CHAIN MODE, ALL, DVD & CD indicators (31)

The Chain Mode indicator appears when the Chain mode

function is on. The ALL, DVD, and CD indicators show

the type or Chain mode selected.

BPause indicator (23)

This indicator appears when playback is paused.

CDisc indicators 1–6

2DISC indicator

These indicators show how many discs are loaded. The

number of the current disc has a circle around it.

When the disc tray is closed, all of the disc indicators

appear until the DPC-7.5 has checked each bay for the

presence of a disc. If a bay is found to have no disc, the

corresponding indicator disappears.

The number of the currently selected disc appears here.

3TITLE indicator

While stopped, the total number of titles on the current

DVD-Video is displayed here. During playback, the

number of the current title is displayed.

DChapter & track number

4CHP indicator

Chapter and track numbers appears here.

This indicator appears while the number of the current

chapter is being displayed.

ETime display

Time information, such as total time, remaining time,

and so on, is displayed here in hours, minutes, and sec-

onds. Other messages are also displayed.

5TRACK indicator

This indicator appears while track numbers are being

displayed. While stopped, the total number of tracks on

the current Video CD, audio CD, or MP3/WMA disc are

displayed. During playback, the number of the current

track is displayed.

FVCDVD indicator

This indicator shows the type of disc currently selected:

DVD: DVD-Video, DVD-R, or DVD-RW

VCD: Video CD

6PRGV indicator (36)

CD: Audio CD, MP3/WMA/JPEG CD-R, or CD-RW

This indicator appears when the Progressive Scanning

function is on.

7LAST indicator (37)

This indicator appears when the Last Memory function

has been set.

8TOTAL indicator

This indicator appears while the total time is being dis-

played.

9REMAIN indicator

This indicator appears while the remaining time is being

displayed.

0Camera angle indicator (35)

This indicator appears if the DVD-Video being played

features multiple camera angles.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls & Connectors—Continued

Rear Panel

12 3 4

VIDEO OUTPUT

COMPONENT

DVD CHANGER

MODEL NO. DPC-7.5

AUDIO OUTPUT

DIGITAL

RS 232

COMPONENT

VIDEO

OPTICAL

COAXIAL

AC INLET

AUDIO OUTPUT

ANALOG

VIDEO

OUT

REMOTE

CONTROL

5 6 7 89 J

For detailed information, refer to the pages in parenthesis.

F IR IN/OUT (20)

The IR IN connector can be used to connect a commer-

cially available IR receiver, which can be used to pickup

signals from the remote controller when the DPC-7.5 is

located in another room, installed in a rack, or is out of

range of the remote controller

The IR OUT connector can be used to connect a com-

mercially available IR emitter, which can be used to pass

remote controller signals received by the IR IN along to

other AV components.

A COMPONENT 1 VIDEO OUTPUT (17)

These RCA/phono connectors can be used to connect a

TV or projector with RCA/phono component video

inputs.

The DPC-7.5 has two component video outputs, the

COMPONENT 1 and COMPONENT 2, however, they

output the same video signal.

B COMPONENT 2 VIDEO OUTPUT (17)

These BNC connectors can be used to connect a TV or

projector with BNC component video inputs.

The DPC-7.5 has two component video outputs, the

COMPONENT 1 and COMPONENT 2, however, they

output the same video signal.

REMOTE CONTROL (19)

These

nected to the

Onkyo AV components for interactive control.

To use you must also make an analog RCA/phono

(Remote Interactive) connectors can be con-

connectors on your other Integra/

C S VIDEO OUTPUT (17)

connection between your DPC-7.5 and Integra/Onkyo

AV receiver, even if they are connected digitally.

These connectors can be used to connect TVs or projec-

tors with S-Video inputs.

The DPC-7.5 has two S-Video output connectors. They

output the same video signal.

H OPTICAL AUDIO OUTPUT (18)

This optical digital audio output can be connected to an

optical digital audio input on a hi-ﬁ amp, AV receiver, or

surround sound decoder (Dolby Digital, DTS).

D VIDEO OUTPUT (17)

These RCA/phono connectors can be used to connect

TVs or projectors with composite video inputs.

The DPC-7.5 has two composite video output connec-

tors. They output the same video signal respectively.

I COAXIAL AUDIO OUTPUT (18)

This coaxial digital audio output can be connected to an

coaxial digital audio input on a hi-ﬁ amp, AV receiver, or

surround sound decoder (Dolby Digital, DTS).

E ANALOG AUDIO OUTPUT (17, 18)

These RCA/phono connectors can be connected to the

analog audio inputs on your TV, hi-ﬁ amp, AV receiver,

or surround sound decoder (Dolby Pro Logic). There are

two sets of outputs.You could connect one set to yourAV

receiver, the other to your TV for those occasions when

you want to watch a DVD-Video but don’t want to use

your AV receiver.

J RS 232

This RS-232 port can be connected to an external con-

troller.

K AC INLET (21)

The supplied power cord is connected here. The other

end of the power cord should be connected to a suitable

wall outlet.

The DPC-7.5 has two pairs of stereo analog audio output

connectors. They output the same audio signal respec-

tively.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls & Connectors—Continued

For detailed information, refer to the pages in parenthesis.

Remote Controller

A Standby button (21)

This button is used to set the DPC-7.5 to Standby.

B On button (21)

This button is used to turn on the DPC-7.5.

C Search button (26, 29, 32)

This button is used to search for titles, chapters, tracks,

and speciﬁc points in time.

Standby

Open/

Chain Mode

D Last M button (37)

Search Last M Memory

This button is used with the Last Memory function.

Repeat

E Number buttons (26, 29, 32)

These buttons are used to enter title, chapter, and track

numbers and to enter times for locating speciﬁc points in

time.

To enter a single-digit number, simply press the corre-

sponding button. To enter a double-digit number, enter

the numbers in order from left-to-right (e.g., to enter 14,

press [1] then [4].

The [+10] button is used to enter multiples of ten (i.e.,

10, 20, 30, and so on). For example, to enter the number

25, press the [+10] button twice followed by the [5] but-

ton.

Random

Display

Clear

Top Menu

Enter

Return

Setup

F Top Menu button (25)

Audio Angle Subtitle

This button is used to select the top menu.

Stop

Play

Pause

G Return button (25, 27, 40)

This button is used to move the preceding setup menu

and to restart Video CD menu playback.

Down

H Audio button (36)

Step/Slow

Disc 1 Disc

Disc

This button is used to select foreign language

soundtracks and audio formats (e.g., Dolby Digital or

DTS).

Disc

Disc Skip Progressive Dimmer

I Angle button (35)

This button is used to select different camera angles.

J FR [ ] button (29)

RC 543DV

This button is used to start fast reverse.

K FF [ ] button (29)

This button is used to start fast forward.

L Disc 1–6 buttons (23)

These buttons are used to select discs. Playback starts

automatically when a disc is selected with these buttons.

M Disc Skip button (22, 23)

This button is used to select the disc bays (i.e., rotate the

disc tray) when loading or removing discs, and to select

discs for playback.

N Memory button (34)

This button is used with the Memory Playback function.

O Open/Close [ ] button (22)

This button is used to open and close the disc tray.

P Chain Mode button (31)

This button is used with the Chain mode function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controls & Connectors—Continued

Q Repeat button (32)

This button is used to set the Repeat Playback functions.

R A–B button (33)

This button is used to set the A–B Repeat Playback func-

tion.

S Random button (33)

Standby

Open/

Chain Mode

This button is used with the Random Playback function.

Search Last M Memory

T Display button (38)

This button is used to display information about the cur-

rent disc, title, chapter, or track, including the elapsed

time, remaining time, total time, and so on.

Repeat

U Clear button

Random

Display

This button is used to cancel various functions.

V Menu button (25)

Clear

This button is used to select the menu.

Top Menu

W Enter button

This button is used to start playback of the selected title

chapter, or track and to conﬁrm settings.

Enter

Return

Setup

X [ ], [ ], [ ], [ ] buttons

These buttons are used to navigate DVD-Video menus

and the onscreen setup menus.

Audio Angle Subtitle

Y Setup button (40)

Stop

Play

Pause

This button is used to open and close the onscreen setup

menus.

Down

Z Subtitle button (36)

Step/Slow

Disc 1 Disc

Disc

This button is used to select subtitles.

Disc

a Play [ ] button (23)

This button is used to start playback.

Disc Skip Progressive Dimmer

b Pause [ ] button (23)

This button is used to pause playback.

RC 543DV

c Stop [ ] button (23)

This button is used to stop playback.

d Up [ ] button (26, 29)

This button is used to select the next chapter or track.

e Down [ ] button (26, 29)

This button is used to select the previous chapter or

track. During playback it selects the beginning of the

current chapter or track.

f Step/Slow [+] & [–] buttons (30)

These buttons are used with the Frame-by-Frame Play-

back and Slow Motion Playback functions.

g Dimmer button (30)

This button is used to adjust the display brightness.

h Progressive button (36)

This button is used to turn on and off the Progressive

Scanning function. Progressive scanning can’t be turned

on or off during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Using the DPC-7.5

Installing the Remote Controller’s

Batteries

Using the Remote Controller

To use the remote controller, point it at the DPC-7.5’s remote

control sensor, as shown below.

Open the battery compartment, as shown.

Remote control sensor

DPC-7.5

Standb

y/On

Last

Rep

eat

Dim

Stan

dby

Disp

lay

Open

lose

Disc

kip

use

ain

Stop

Play

Ent

C-7.5

Insert the two supplied batteries (AA/R6) in

accordance with the polarity diagram inside

the battery compartment.

30˚

Close the battery compartment.

Notes:

• The remote controller may not work reliably if the DPC-

7.5 is subjected to bright light, such as direct sunlight or

inverter-type ﬂuorescent lights. Keep this in mind when

installing the DPC-7.5.

• If another remote controller of the same type is used in the

same room, or the DPC-7.5 is installed close to equipment

that uses infrared rays, the remote controller may not work

reliably.

Notes:

• The supplied batteries should last for about six months,

although this will vary with usage.

• Don’t put anything, such as a book, on the remote control-

ler, because the buttons may be pressed inadvertently,

thereby draining the batteries.

• If the remote controller doesn’t work reliably, try replacing

both batteries.

• Don’t mix new and old batteries, or different types of bat-

teries.

• The remote controller may not work reliably if the DPC-

7.5 is installed in a rack behind colored glass doors. Keep

this in mind when installing the DPC-7.5.

• If you intend not to use the remote controller for a long

time, remove the batteries to prevent possible leakage and

corrosion.

• The remote controller will not work if there’s an obstacle

between it and the DPC-7.5’s remote control sensor.

• Flat batteries should be removed as soon as possible to pre-

vent possible leakage and corrosion.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the DPC-7.5

This chapter explains how to connect the DPC-7.5 to your

other AV components.

RCA/phono AV Connection Color Coding

RCA/phono AV connections are usually color coded: red,

white, and yellow. Use red plugs to connect right-channel

audio inputs and outputs (typically labeled “R”). Use white

plugs to connect left-channel audio inputs and outputs (typi-

cally labeled “L”). And use yellow plugs to connect compos-

ite video inputs and outputs.

Before Making Any Connections

• Read the manuals supplied with your AV components.

• Don’t connect the power cord until you’ve completed all

audio and video connections.

Optical Digital Inputs

Right (red)

Left (white)

Right (red)

Left (white)

Analog audio

The DPC-7.5’s optical digital connector

has a dust cap for keeping out dust and dirt

when it’s not in use. Remove the cap before

inserting an optical digital plug. Push the

plug in all the way to make a good connec-

tion. Keep the dust cap in a safe place for

future use.

Composite video

(Yellow)

Right!

• Push each plug in all the way to

make a good connection (loose con-

nections can cause noise or malfunc-

tions).

• To prevent interference, keep audio

and video cables away from power

cords and speaker cables.

Wrong!

AV Cables & Connectors

Video

Component video separates the luminance (Y) and color

difference signals (P^R, P^B), providing the best picture

quality. (Some TV manufacturers label their component

video inputs slightly differently.)

/C^R

/ CR

COMPONENT

Component

video

The DPC-7.5 has RCA/phono and BNC component

video outputs.

/C^R

/ CR

COMPONENT

S VIDEO

VIDEO

S-Video provides better picture quality than composite

video.

S-Video

Composite video can be found on virtually all TVs,

VCRs, and other video equipment. Use only dedicated

composite video cables.

Composite

video

Audio

Optical digital audio connections with the optical digital

audio output and a suitable AV receiver, you can enjoy

DVD-Videos with surround sound.

OPTICAL

Optical digital

Coaxial digital audio connections with the coaxial digi-

tal audio output and a suitable AV receiver, you can

enjoy DVD-Videos with surround sound.

COAXIAL

AUDIO

Coaxial digital

Analog

RCA/phono analog audio connectors can be found on

virtually all AV components.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the DPC-7.5—Continued

ConnectingYour TV or Projector

This section explains how to connect the DPC-7.5 to your TV

or projector.

S-Video offers better picture quality than composite video,

so if your TV supports it, use the supplied S-Video cable to

connect the DPC-7.5’s S VIDEO output to an S-Video input

on your TV. Failing that, use the supplied composite video

cable to connect the DPC-7.5’sVIDEO output to a composite

video input on your TV.

In this hookup example, the TV handles the audio and video.

If your TV has a Dolby Pro Logic decoder built-in, you’ll be

able to enjoy DVDs and videos that bear the Dolby Surround

logo.

To enjoy Dolby Digital or DTS (5.1-channel surround),

you’ll need a compatible decoder (see page 18).

Turn off the DPC-7.5 and your TV, and dis-

connect their power cords from the wall out-

lets.

The DPC-7.5 has three types of video output: component

video, S-Video, and composite video. Component video

offers the best picture quality, so if your TV supports it, use

a commercially available component video cable to connect

the DPC-7.5’s COMPONENT video output to the compo-

nent video inputs on your TV. If your TV supports progres-

sive scanning, you must use component video in order to take

advantage of that feature.

Connect the DPC-7.5 to your TV as shown.

When you’ve completed all connections,see

“Powering Up & Setting Up the DPC-7.5” on

page 21.

*1 The DPC-7.5 has two composite video out-

put connectors and two pairs of stereo ana-

log audio output connectors. They output the

same video and audio signals respectively.

TV or projector

*2 The DPC-7.5 has two S-Video output con-

nectors. They output the same video signal.

*3 The DPC-7.5 has two component video out-

puts. The COMPONENT 1 output uses

RCA/phono connectors. The COMPO-

NENT 2 output uses BNC connectors. They

output the same video signal.

VIDEO IN

ANALOG

INPUT

S VIDEO IN

(red)

(white)

(yellow)

Component video

cable*³

S-Video cable

AV RCA/phono

(supplied)*²

cable (supplied)*¹

Signal flow

(red)

Only one connection required!

Choose component video,

S-Video, or composite video.

(white)

(yellow)

VIDEO OUTPUT

COMPONENT

DVD CHANGER

MODEL NO. DPC-7.5

AUDIO OUTPUT

DIGITAL

RS 232

COMPONENT

VIDEO

OPTICAL

COAXIAL

AC INLET

AUDIO OUTPUT

ANALOG

VIDEO

OUT

REMOTE

CONTROL

• When you use the analog audio outputs, don’t play DTS

CDs and don’t select DTS soundtracks on DVD-Videos.

Doing so will produce unpleasant digital noise, which may

damage your equipment.

Notes

• Before making any connections, turn off the DPC-7.5 and

your TV and disconnect their power cords from the wall

outlets.

• If your TV or projector has BNC component video inputs,

use a BNC component video cable to connect them to the

DPC-7.5’s BNC component video outputs.

• Also refer to the connection information supplied with

your TV.

• Connect the DPC-7.5’s video outputs directly to your TV.

Don’t connect aVCR or other video equipment in between

your DPC-7.5 and TV. Doing so may result in picture dis-

tortion, because of the copy protection system used on

DVD-Videos.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the DPC-7.5—Continued

Notes:

ConnectingYour Hi-Fi Amp

• Be sure to set the Digital Out–>Dolby Digital setting to

“Dolby Digital>PCM” (see page 42). Otherwise an

unpleasant digital noise may be heard, which may damage

your equipment.

This section explains how to connect the DPC-7.5 to a stereo

hi-ﬁ amp or receiver for better sound quality than that of most

TVs. This is ideal for playing your audio CDs and MP3/

WMA discs in the DPC-7.5. DVD-Videos and Video CDs

will sound better too.You can also enjoy Dolby Pro Logic, so

long as your receiver supports it.

• Never connect the DPC-7.5 to the AC-3RF input on a

Dolby Digital receiver. The AC-3RF format is not sup-

ported by the DPC-7.5.

Analog Connection

Connecting for Dolby Digital or DTS

Use an RCA/phono audio cable to connect the DPC-7.5’s

ANALOG AUDIO OUTPUTs to a pair of analog audio

inputs on your hi-ﬁ amp or receiver, as shown.

To enjoy Dolby Digital or DTS surround sound, you need to

connect one of the DPC-7.5 digital audio outputs to the dig-

ital input on a Dolby Digital or DTS decoder or an AV

receiver with built-in decoders.

Signal flow

This hookup example will also allow you to enjoy Dolby Pro

Logic, so long as your decoder or AV receiver supports it.

ANALOG

INPUT

AV component with

Dolby Digital/DTS decoder

(white)

(red)

Signal flow

COAXIAL

OPTICAL

RCA/phono cable

VIDEO OUTPUT

COMPONENT

(red)

Connect one or the other

AUDIO OUTPUT

DIGITAL

COMPONENT

VIDEO

ANALOG

OPTICAL

COAXIAL

OPTICAL

COAXIAL

VIDEO OUTPUT

AUDIO OUTPUT

ANALOG

VIDEO

COMPONENT

DVD CHANGER

MODEL NO. DPC-7.5

OUT

REMOTE

CONTROL

AUDIO OUTPUT

DIGITAL

RS 232

COMPONENT

VIDEO

OPTICAL

COAXIAL

AUDIO OUTPUT

ANALOG

VIDEO

Notes:

OUT

REMOTE

CONTROL

• When you use the analog audio outputs, don’t play DTS

CDs or don’t select DTS soundtracks on DVD-Videos.

Doing so will produce unpleasant digital noise, which may

damage your equipment.

Notes:

• In addition to a digital connection, we recommend also

connecting using the stereo analog connection.

• The DPC-7.5 has two composite video output connectors

and two pairs of stereo analog audio output connectors.

They output the same video and audio signals respectively.

To record the audio from a CD-R disc etc. to a cassette or

CDR recorder that’s connected to the AV receiver, and

when your AV receiver has Zone2, you must connect the

DPC-7.5’s analog audio outputs to the AV receiver.

Digital Connection

• Make sure that the Digital Out > Dolby Digital setting to

“Dolby Digital” (see page 42). Otherwise you won’t get

surround sound.

Use an optical (or coaxial) digital audio cable to connect the

DPC-7.5’s OPTICAL (or COAXIAL) DIGITAL AUDIO

OUTPUT to an optical (or coaxial) input on your hi-ﬁ amp or

receiver, as shown.

• Also refer to the connection information supplied with

your AV receiver or decoder.

Signal flow

COAXIAL

OPTICAL

• When playing Dolby Digital or DTS source material, be

sure to select Dolby Digital or DTS decoding, respectively,

on your AV receiver or decoder. See the relevant manuals.

• You can experience Dolby Digital only with DVDs that

bear the Dolby Digital logo. Likewise, you can experience

DTS only with DVDs or CDs that bear the DTS logo.

Connect one or the other

OPTICAL

COAXIAL

• When a DVD disc is loaded into the DVD player, the disc

would default to Dolby digital format. For DTS playback

you would need to select DTS in the table of contents of

the movie. Usually in “Language” or in “Audio Setup”.

VIDEO OUTPUT

COMPONENT

DVD CHANGER

MODEL NO. DPC-7.5

AUDIO OUTPUT

DIGITAL

RS 232

COMPONENT

VIDEO

OPTICAL

COAXIAL

AUDIO OUTPUT

ANALOG

VIDEO

OUT

REMOTE

CONTROL

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the DPC-7.5—Continued

Plug the supplied power cord into the AC

INLET

Connecting

Components

-compatible AV

• Do not use a power cord other than the one supplied with

the DPC-7.5. The power cord supplied is designed for use

with the DPC-7.5 and should not be used with any other

device.

With

(Remote Interactive) you can control your DPC-7.5

by using the remote controller supplied with your Onkyo or

Integra

-compatible AV receiver.

• Never have the power cord disconnected from the DPC-7.5

while the other end is plugged into the wall outlet. Doing

so may cause an electric shock. Always connect by plug-

ging into the wall outlet last and disconnect by unplugging

from the wall outlet ﬁrst.

Integra/Onkyo AV receiver

DIGITAL IN

OPTICAL

REMOTE

CONTROL

ANALOG

INPUT

ANGER

DPC-7.5

AC INLET

To use

you

must make an

analog RCA/phono

connection between

the DPC-7.5 and the

other component

even if they are

cable

(Supplied)

connected digitally.

AUDIO OUTPUT

ANALOG

AUDIO OUTPUT

DIGITAL

OPTICAL COAXIAL

REMOTE

CONTROL

VIDEO OUTPUT

COMPONENT

DVD CHANGER

MODEL NO. DPC-7.5

AUDIO OUTPUT

DIGITAL

RS 232

COMPONENT

VIDEO

OPTICAL

COAXIAL

AUDIO OUTPUT

ANALOG

VIDEO

OUT

REMOTE

CONTROL

Notes:

• Push the plugs in all the way to make a good connection.

• Use only

cables for

connections.

• To use

you must also make an analog RCA/phono

connection between your DPC-7.5 and Integra/Onkyo

AV receiver, even if they are connected digitally.

• The DPC-7.5 has two

connectors. You can connect

either one to your Integra/Onkyo AV receiver. The other

connector is for connecting additional

components.

-compatible

• Connect the DPC-7.5’s

connector to only Integra/

Onkyo AV components. Connecting to other manufac-

turer’s AV components may cause them to malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting the DPC-7.5—Continued

Controlling AV Components that are Out of Range

You can use the following multi-room kits to control the

DPC-7.5 when it’s out of range of the remote controller:

Controlling Other Out-of-range AV Components

If another AV component is out of range of its remote con-

troller, you can use a commercially available IR emitter to

retransmit the remote controller signals received at the DPC-

7.5’s IR IN, as shown below.

• Integra Multi-Room System (IR Remote Controller Exten-

sion System)

• Multiroom AV distribution and control systems such as

those made by Niles and Xantech .

VIDEO OUTPUT

COMPONENT

IR receiver

Connecting

block

DVD CHANGER

MODEL NO. DPC-7.5

AUDIO OUTPUT

DIGITAL

RS 232

COMPONENT

VIDEO

OPTICAL

COAXIAL

IR IN

AUDIO OUTPUT

ANALOG

VIDEO

IR OUT

DPC-7.5

OUT

REMOTE

CONTROL

IR emitter

Remote controller

OUT

Other

component

Signal flow

Controlling the DPC-7.5 When It’s Out of Range

Connect the IR emitter to the DPC-7.5’s IR OUT, and place

the IR emitter in front of the other AV component’s remote

control sensor (usually located on its front panel), as shown

below. See the instructions supplied with the IR emitter.

If the DPC-7.5 is located in another room, installed in a cab-

inet, or out of range of its remote controller, you can use a

commercially available IR receiver to pickup the remote con-

troller signals and feed them to the DPC-7.5, as shown below.

Other component

Remote control

IR receiver

Connecting

block

sensor

from connecting block

IR emitter

Miniplug cable

IR IN

DPC-7.5

Remote controller

Miniplug

OUT

Inside

cabinet

IR Emitter

DPC-7.5

Signal flow

Only remote controller signals received by the DPC-7.5’s IR

IN are fed through to the IR OUT. Signals picked up by the

DPC-7.5’s remote control sensor are not output.

Connect the IR receiver to the DPC-7.5 as shown below.

from connecting block

Miniplug cable

OUT

DPC-7.5

Signal flow

Download from Www.Somanuals.com. All Manuals Search And Download.

Powering Up & Setting Up the DPC-7.5

Here you need to specify the size of your TV (standard 4:3 or

widescreen 16:9), select a language for the onscreen setup

menus, and conﬁgure the digital audio output. You can

change these settings later by using the onscreen setup menus

(see page 39).

Standby/On

On Standby

Standby

Open/

Standby/On

Chain Mode

Search Last

Memory

Last Memory Repeat

Dimmer

Display

Repeat

Standby

Use the remote controller’s [ ]/[ ]

buttons to select a TV shape, and

then press [Enter].

Random

Display

Remote controller

Clear

Top Menu

See page 40 for more information on the

TV Shape options.

Enter

Return

Setup

Audio Angle Subtitle

The On-Screen Language menu appears.

Standby indicator

Stop

Play

Pause

Down

Select a language, and then press

[Enter].

Remote controller

Powering Up the DPC-7.5

See page 42 for more information on the

language options.

Before connecting the power cord, connect all your AV com-

ponents (see page 16 to page 20).

Enter

The Digital Out–>Dolby Digital menu

appears.

Don’t forget to turn on your TV or projector and select the

video input to which the DPC-7.5 is connected.

Select a Dolby Digital option, and

then press [Enter].

See page 42 for more information on the

digital audio output options.

If you’re using a hi-ﬁ amp, AV receiver, or surround sound

decoder for audio playback, turn that on as well and select the

audio input to which the DPC-7.5 is connected.

Remote controller

Enter

Connect the power cord to the AC

INLET. Connect the other end to a

suitable wall outlet.

The DPC-7.5 enters Standby mode, and

the Standby indicator comes on.

The Digital Out–>Linear PCM Out menu

appears.

Select a Linear PCM Out option,

and then press [Enter].

Remote controller

The Digital Out–>MPEG Out menu

To turn on the DPC-7.5, press the

[Standby/On] button (or the remote

controller’s [On] button).

appears.

Enter

Standby/On

The DPC-7.5 comes on, the display lights

up, and the Standby indicator goes off.

Select an MPEG Out option, and

then press [Enter].

Remote controller

To turn off the DPC-7.5, press the

Remote controller

[Standby/On] button (or the remote con-

The Digital Out–>Digital Out menu

appears.

Standby

troller’s [Standby] button). The DPC-7.5

enters Standby mode and the Standby

indicator comes on.

Enter

Select a Digital Out option, and

then press [Enter].

Remote controller

First Time Setup

The Initial Setup menu closes.

The very ﬁrst time you turn on your DPC-7.5, the Initial

Setup menu appears onscreen, as shown.

Enter

Initial Setup

TV Shape

4:3 Letter box

4:3 Normal

On-Screen Language

Digital Out

Your DPC-7.5 is now ready for use. See page 22 for informa-

tion on loading discs, and page 23 for information on select-

ing and playing discs.

16:9 Widescreen

16:9 Compressed

Notes:

• You can change the language of the onscreen setup menus,

and your preferred languages for DVD menus, foreign lan-

guage soundtracks, and subtitles individually on the Lan-

guage page of the onscreen setup menus (see page 42).

• Not all DVD-Videos have multi-language menus, foreign

language soundtracks, and subtitles. In such cases, the

disc’s default language is used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback

Notes:

• You can load up to six discs. You don’t have to load all six

discs every time.

Open/Close

Play/Enter

Open/

Standby

Open/

Chain Mode

Search Last

Memory

• When the disc tray is closed, all of the disc indicators

appear until the DPC-7.5 has checked each bay for the

presence of a disc. If a bay is found to have no disc, the

corresponding indicator disappears.

Repeat

Open/Close

Disc Skip

Random

Display

Stop

Play

Enter

Chain

Mode

Pause

Clear

Top Menu

• The disc tray can be opened and closed even while the

DPC-7.5 is in Standby mode, so you don’t have to turn it

on to load or remove your discs. (The disc tray may take

several seconds to open.)

Enter

Return

Setup

-7.5

Audio Angle Subtitle

DPC

Stop

Play

Pause

Down

Step/Slow

Disc

• The DPC-7.5 supports 8 cm and 12 cm discs. To avoid

damaging your discs or DPC-7.5, always place discs in the

center of the disc bays.

Disc Skip

Disc1–6

Disc Skip Progressive Dimmer

Disc Skip

RC-543DV

• Only load discs that are supported by the DPC-7.5 (see

page 7). Don’t load cartridge-type discs.

• To avoid personal injury, keep your hands away from the

disc tray as it closes.

Loading & Removing Discs

• Always use the Open/Close [ ] button to open and close

the disc tray. Never push the disc tray, and don’t touch it,

or obstruct it while it’s opening or closing. Don’t press

down on the disc tray while it’s open, and don’t load any-

thing other than supported discs. Doing so may damage

your discs or DPC-7.5.

DVD

VCD

MP3

WMA

JPEG

This section explains how to load and remove discs.

Press the Open/Close [ ] button.

The disc tray opens and the six disc num-

ber indicators appear on the display. A cir-

Open/Close

Loading Discs During Playback

cle appears around the number of the disc

DVD

VCD

MP3

WMA

JPEG

bay on the right.

Remote controller

Open/

This section explains how to load and remove discs without

stopping playback.

Press the Open/Close [ ] button.

The disc tray opens.

Place a disc, label side up, into

each bay.

Open/Close

The disc that’s currently playing remains

inside the DPC-7.5 and its disc bay is

empty and won’t come to the front. To

remove this disc you must stop playback

Disc Skip

Press the [Disc Skip] button to

access the other disc bays.

The disc tray turns counterclockwise two

bays at a time.

Remote controller

Open/

before pressing the Open/Close [

button.

]

Remote controller

Disc Skip

Load or remove discs as required,

and press the [Disc Skip] button to

access the other disc bays.

When you’ve ﬁnished, press the

Open/Close [ ] button again.

The disc tray closes.

The disc numbers appear onscreen. The

number of the disc bay on the right is

highlighted.

Remote controller

Disc Skip

Open/Close

See page 23 for information on selecting

and playing discs.

When you’ve ﬁnished, press the

Open/Close [ ] button again.

The disc tray closes.

Tip: If you press the Play [ ] button, the

Remote controller

disc tray will close and playback of the

disc in the right bay will start automati-

cally. If there is no disc in that bay, the

DPC-7.5 will check the other bays and

play the ﬁrst disc it ﬁnds.

Open/

Open/Close

Playback of the current disc continues

uninterrupted until you either stop play-

back or select another disc.

Remote controller

Tip: If you press one of the remote con-

troller’s Disc 1–6 buttons, the disc tray

will close, playback of the current disc

will stop, and playback of the newly

selected disc will start automatically.

Open/

Tip: If you press one of the remote con-

troller’s Disc 1–6 buttons, the disc tray

will close and playback of the selected

disc will start automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

Random

Display

Starting, Pausing & Stopping Playback

Stop Play/Enter

Play

Clear

DVD

VCD

MP3

WMA

Top Menu

Stop

Pause

Enter

This section explains how to start, pause, and stop playback.

Return

Setup

Open/Close

Audio Angle Subtitle

Stop

Play

Enter

Chain

Mode

Disc Skip

Pause

■ Start

To start playback, press the Play

[ ] button.

Stop

Play

Pause

Down

Play

Step/Slow

Disc

Playback starts and the Play indicator

appears on the display.

Disc1–6

Disc Skip Progressive Dimmer

-7.5

DPC

Disc Skip

If the disc is a DVD-Video or Video CD

with PBC (Playback Control), you may

need to start playback from a menu (see

page 25).

Enter

RC-543DV

Remote controller

Disc Skip

Pause

Play

The front panel Play [ ] button performs

play and enter functions. The remote con-

troller has separate Play [ ] and [Enter]

buttons.

Selecting Discs

DVD

VCD

MP3

WMA

JPEG

The section explains how to select loaded discs.

■ Pause

To pause playback, press the

Pause [ ] button.

Playback pauses and the Pause indica-

tor appears on the display.

Remote controller

Use the remote controller’s Disc

1–6 buttons to select loaded discs.

On the display, the number of the current

disc has a circle around it.

Pause

Disc 1 Disc

Disc

To resume playback, press the Play [ ]

button.

Remote controller

What happens next depends on the type of

disc you selected, as follows:

Pause

Playback resumes and the Pause indica-

tor disappears.

DVD-Video: Typically a menu appears

onscreen. See page 25.

Video CD: Playback starts automatically.

Audio CD: Playback starts automatically.

■ Stop

To stop playback, press the Stop

[ ] button.

Playback stops and the Play indicator

disappears.

Stop

MP3/WMA/JPEG: The Disc Navigator

appears onscreen. See page 27.

JPEG-only CD: With some JPEG CDs,

picture thumbnails appear onscreen. See

page 31.

Remote controller

Stop

Notes:

• The type of disc currently selected is shown on the display:

DVD, VCD, or CD (see page 11).

Notes:

• During playback, you can select chapters or tracks by

using the Up [ ] and Down [ ] buttons.

• You can select discs while the DPC-7.5 is stopped or dur-

ing playback.

• When you stop playback of a DVD-Video orVideo CD, the

DPC-7.5 remembers the point at which playback was

stopped and “Resume” appears onscreen for a few sec-

onds. To resume playback from that point, press the Play

[ ] button. To cancel the Resume function, press the Stop

[ ] button again. The Resume function is reset when

another disc is selected.

• You can use the [Disc Skip] button to skip the current disc

and start the next disc. If disc #6 is the current disc, disc #1

will be selected next.

• With the Last Memory function you can resume playback

from a speciﬁc point even if the disc has been removed (see

page 37).

• Do not move the DPC-7.5 or subject it to vibration during

playback. Doing so may damage your discs or DPC-7.5.

• You can improve the picture quality of paused playback

with the Pause/Still setting (see page 44).

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

• Prolonged display of the same picture or menu may cause

irreparable damage to your TV screen called screen burn-

in. To prevent this, don’t keep playback paused for too long

and always press the Stop [ ] button when you’ve ﬁnished

playing a DVD-Video orVideo CD.Your DPC-7.5 features

a screen saver to protect your TV from the effects of burn-

in (see page 44).

• With some DVD-Videos, you may experience picture

noise that is not normally visible with regular TV broad-

casts. This is usually because DVD-Video uses a lot of

high-resolution video data. The amount of noise, if any,

will depend on your particular TV and the problem can

sometimes be alleviated by turning down your TV’s sharp-

ness control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

Use the remote controller’s naviga-

tion [ ], [ ], [ ], [ ] buttons to

select items on the menu, and use

the [Enter] button to conﬁrm your

selection.

Play/Enter

Remote controller

Open/Close

Enter

Stop

Play

Enter

Chain

Mode

Disc Skip

Pause

If you select a playback option (e.g., sub-

titles), another menu of options will typi-

cally appear, in which case you use the

remote controller’s navigation buttons to

select items and the [Enter] button to con-

ﬁrm your choice.

-7.5

DPC

Standby

Open/

Chain Mode

Search Last

Memory

Repeat

With PBC Video CDs, you have to enter a

number to select a menu item, which you

can do by using the remote controller’s

number buttons. If the Video CD’s menu

has several pages, use the Up [ ] and

Down [ ] buttons to select them. Dur-

ing playback, you can display the menu

by pressing the [Return] button.

Random

Display

Clear

Top Menu

Enter

Return

Audio

Enter

Return

Setup

Audio Angle Subtitle

Subtitle

Play

Stop

Play

Pause

Down

Step/Slow

Disc

Disc Skip Progressive Dimmer

Notes:

• Not all DVD-Videos and PBC Video CDs have menus.

RC-543DV

• Menu operation varies from disc-to-disc. See the disc’s

sleeve notes for details.

• On some DVD-Videos, options such as foreign language

soundtracks, subtitles, and audio formats appear on a sep-

arate menu called the disc menu, and titles and chapters

appear on what’s called the title menu. To display the disc

menu, press the [Menu] button. If no menu appears, press

the [Top Menu] button.

Navigating Disc Menus

DVD

VCD

DVD-Videos usually have an onscreen menu from which you

can select titles, chapters, and other options, including for-

eign language soundtracks, subtitles, and audio formats (e.g.,

Dolby Digital or DTS). Video CDs that support PBC (Play-

back Control) may also have an onscreen menu (see page 8).

• With DVD-Videos, foreign language soundtracks and

audio formats can usually be selected during playback by

using the remote controller’s [Audio] button (see page 36).

Similarly, subtitles can be selected by using the remote

controller’s [Subtitle] button (see page 36).

Load and select a DVD-Video or

Video CD.

• You must turn on PBC in order to use the menus on a PBC

Video CD (see page 44).

See page 22 and page 23.

With DVD-Videos, a menu usually

appears automatically. If it doesn’t, try

pressing the [Top Menu] button.

• If PBC is off (see page 44), or your Video CD doesn’t sup-

port it, you can use the Up [ ] and Down [ ] buttons,

or the remote controller’s number buttons to select tracks

on a Video CD.

With some PBC Video CDs, you may

have to press the Play [ ] button to dis-

play the menu.

• PBC menus can be hidden or displayed while playback is

stopped by pressing the [Top Menu] button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

Use the number buttons to specify

a chapter or title.

To enter, for example, “2,” press the [2]

button.

Play/Enter

Standby

Open/

Chain Mode

Remote controller

Search Last

Memory

Repeat

Number

buttons

Open/Close

Random

Display

Stop

Play

Enter

Chain

Mode

disc

Disc Skip

Pause

Disc Navigator

Clear

no.

Top Menu

Clear

Enter

Disc

Title

Chapter

Enter

1:DVD Current/Total 01/02 Current/Total -2 /08

Return

Setup

-7.5

DPC

Audio Angle Subtitle

Stop

Play

Pause

To enter, for example, “12,” press the [1]

or [+10] button followed by the [2] but-

ton.

Down

Step/Slow

Disc

Disc Skip Progressive Dimmer

disc

Disc Navigator

RC-543DV

no.

Disc

Title

Chapter

1:DVD Current/Total 01/02 Current/Total 12 /08

To clear the number, press the [Clear] but-

ton.

Selecting Titles & Chapters by Number

DVD

Press the Play [ ] or [Enter] button

to start playback of the speciﬁed

chapter or title.

During playback, you can select other

chapters by using the Up [ ] and Down

This section explains how to select chapters, titles, and discs

by number.

Play

Enter

Load and select a DVD-Video.

See page 22 and page 23.

[

] buttons.

Remote controller

Press the [Search] button.

The Disc Navigator Search window

Play

Remote controller

appears onscreen, as shown.

disc

Disc Navigator

no.

Enter

Disc

Title

Chapter

1:DVD Current/Total 01/02 Current/Total -- /08

With some DVD-Videos you can select

only titles, and the Chapter Current/Total

information is not displayed. Some discs

won’t allow you to select titles.

Notes:

• You can also select chapters by using the number buttons,

without opening the Disc Navigator Search window.

• If the current DVD-Video contains only one title, you

won’t be able to select other titles. Similarly, if it contains

no chapters, you won’t be able to select chapters.

If you want to select a title, use the

[ ] button to select the title number.

Remote controller

• DVD-Videos usually have onscreen menus for selecting

titles and chapters (see page 25).

disc

Disc Navigator

no.

Enter

• With some discs you may not be able to select titles and

chapters as described here.

Disc

Title

Chapter

1:DVD Current/Total -- /02 Current/Total 03/08

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

To open a folder, use the remote

controller’s [ ]/[ ] buttons to select

it, and then press [Enter].

Use the [ ]/[ ] buttons to select tracks in

the open folder.

Remote controller

Standby

Stop Play/Enter

Open/

Chain Mode

Search Last

Memory

Repeat

Memory

Enter

Random

Display

Open/Close

Stop

Play

Enter

Chain

Mode

Disc Skip

Pause

Clear

Top Menu

Enter

To close a folder (i.e., move back up

the directory tree), press the

[Return] button.

To get back to the root level, press the

[Top Menu] button.

Return

Setup

Remote controller

Return

Audio Angle Subtitle

-7.5

DPC

Stop

Play

Pause

Return

Down

Stop

Down

Step/Slow

Disc

Disc Skip Progressive Dimmer

To play a track, select it, and then

press the Play [ ] button (or the

[Enter] button).

When all the tracks in that folder have

been played, tracks in the next folder are

played.

RC-543DV

Play

Enter

Using the Disc Navigator

Remote controller

MP3

WMA

JPEG

You can select the next or previous track

Play

during playback by using the Up [

and Down [ ] buttons.

]

With the Disc Navigator you can select MP3, WMA, and

JPEG ﬁles.

If the disc contains MP3/WMA ﬁles and

JPEG ﬁles, they are played/displayed in

order. JPEG ﬁles will be displayed in a

slideshow. Press the [Menu] button to dis-

play the ﬁrst nine pictures at thumbnail-

size (see page 31). Depending on the disc,

the ﬁrst nine pictures may be displayed

automatically.

Load and select a disc containing

MP3, WMA, or JPEG ﬁles.

See page 22 and page 23.

The Disc Navigator appears, as shown.

disc

Disc Navigator

MODE

001

0.00

002

– –

no.

Folder

Track

ROOT

001.ONKYO

002.RUN

Press the Stop [ ] button to stop

playback.

Stop

₃001.OVER_T

₃002.SONG_F

₃003.DONT_L

₃004.MOST_I

₃005.WELCOM

₃006.GO_AHE

₃007.STILL

₃008.GOOD_D

Remote controller

ENTER

Select

Selection

Stop

RETURN Back to previous

TOP MENU Back to top

The number of the currently selected disc

is shown on the disc icon. The Folder col-

umn lists the folders. The Track column

lists the tracks in the open folder.

Notes:

• If the selected JPEG ﬁle’s resolution is 640 x 480 pixels, a

thumbnail-size preview will be shown. If the resolution

exceeds 640 x 480, a preview will only be shown if the ﬁle

contains thumbnail image data.

The ﬁle information displayed depends on

the type of ﬁle selected, as follows:

MP3/WMA: Title, Artist Name, and

Album Name.

• If the TV shape is set to “16:9 Compressed,” no thumbnail-

size preview will be displayed by the Disc Navigator.

JPEG:Thumbnail-size preview, File Size

and Date Created.

• You can use the Random Playback function to play a ran-

dom selection of MP3/WMA ﬁles (page 33).

During playback, the following informa-

tion is displayed in the upper-right corner:

folder number, ﬁle number, and elapsed

time. During memory playback, the cur-

rent step number is displayed as well.

• During random playback, the remote controller’s naviga-

tion [ ], [ ], [ ], [ ] buttons cannot be used with the Disc

Navigator.

• You can use the Disc Navigator to create a playlist of MP3/

WMA ﬁles for memory playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

Memory Playback in the Disc Navigator

MP3

WMA

JPEG

You can compile a playlist of tracks and folders in the Disc

Navigator as follows.

With the Disc Navigator open,

press the [Memory] button.

Remote controller

The playlist appears in place of the ﬁle

information.

Memory

To add a track to the playlist, use

the [ ], [ ], [ ], [ ] buttons to select

it in the track column, and then

press the [Enter] button.

Remote controller

Enter

To add a folder to the playlist, you need to

select the folder at the top of the track col-

umn. “ALL” will be displayed in the play-

list.

Press the [Memory] button again to open

the Memory Play Setup window, on

Memory

which you can add titles, chapters, tracks,

and folders from any disc (see page 34).

Play

To start memory playback, press

the Play [ ] button.

Enter

Remote controller

Play

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

Play

Enter

Press the Play [ ] button to start

playback of the speciﬁed track.

You can also select tracks while the DPC-

7.5 is during playback by using the Up

Play/Enter

Standby

Open/

Chain Mode

Search Last

Memory

Repeat

Number

buttons

Open/Close

[

] and Down [ ] buttons.

Remote controller

Random

Display

Stop

Play

Enter

Chain

Mode

Disc Skip

Pause

Play

Clear

Top Menu

Enter

Return

Setup

-7.5

DPC

Audio Angle Subtitle

Notes:

Stop

Play

Pause

Play

Down

• You can also select tracks by using the number buttons

without opening the Disc Navigator Search window.

Down

Step/Slow

Disc

• If PBC is on (see page 44), and your Video CD supports

PBC (Playback Control), you may be able to select tracks

from an onscreen menu (see page 25).

Disc Skip Progressive Dimmer

RC-543DV

• With PBC Video CDs you can also use the number buttons

to select tracks from a menu.

• You can’t use the [Search] button during random playback.

Selecting Tracks by Number

VCD

MP3

WMA

Fast Forward & Reverse

This section explains how to select tracks by number.

DVD

VCD

MP3

WMA

Load and select a Video CD, audio

CD, or MP3/WMA disc.

The section explains how to fast forward and reverse.

See page 22 and page 23.

■ Fast forward

During playback, press the FF [

button to start fast forward.

]

Remote controller

Press the [Search] button during

playback.

The Disc Navigator Search window

appears onscreen, as shown.

Playback fast forwards and “Fast

Forward 1” appears onscreen.

Remote controller

To change the fast-forward speed, press

the Fast Forward [ ] button repeatedly

to cycle through the speeds: Fast

disc

Disc Navigator

no.

Forward 1, Fast Forward 2, and so on.

Remote controller

Disc

3:CD

Track

Current/Total -- /18

To resume normal playback, press

the Play [ ] button.

Play

Use the number buttons to enter a

track number.

To enter, for example, “5,” press the [5]

button.

■ Fast reverse

During playback, press the FR [

button to start fast reverse.

]

Remote controller

Playback reverses and “Fast Reverse 1”

appears onscreen.

disc

Disc Navigator

no.

To change the fast-reverse speed, press

Disc

3:CD

Track

Current/Total -5 /18

the Fast Reverse [ ] button repeatedly to

cycle through the speeds: Fast Reverse 1,

Fast Reverse 2, and so on.

Remote controller

To enter, for example, “18,” press the [1]

or [+10] button followed by the [8] button.

To resume normal playback, press

the Play [ ] button.

Play

disc

Disc Navigator

no.

Disc

3:CD

Track

Current/Total 18 /18

Notes:

• There are ﬁve fast forward and fast reverse speeds for

DVD-Videos and three for Video CDs, audio CDs, and

MP3/WMA discs.

• No sound is output during fast forward or fast reverse of a

DVD-Video or Video CD.

• Sound is output intermittently during fast forward or fast

reverse of an audio CD or MP3/WMA disc.

• Fast reverse playback is not possible with WMA tracks.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

long.Your DPC-7.5 features a screen saver to protect your

TV from the effects of burn-in (page 44).

Dimmer

Play/Enter

Standby

Open/

Slow-motion Playback

Open/Close

Chain Mode

Search Last

Memory

Stop

Play

Enter

Chain

Mode

Last Memory Repeat

Dimmer

Display

Disc Skip

Pause

Repeat

DVD

VCD

Random

Display

With the Slow-motion Playback function you can watch a

scene slowly either forward or backward.

Clear

Top Menu

-7.5

DPC

Enter

■ Forward

During playback, press the Step/

Slow [+] button.

Forward slow-motion playback starts and

“Slow 1” appears onscreen.

Return

Setup

slow motion

Audio Angle Subtitle

Stop

Play

Pause

Play

Remote controller

Down

Step/Slow

Disc

Step/Slow

Step/Slow +/–

Dimmer

To change the slow-motion speed, press

the Step/Slow [+] button repeatedly to

cycle through the speeds: Slow 1, Slow 2,

and so on.

Disc Skip Progressive Dimmer

RC-543DV

■ Backward

During playback, press the Step/

Slow [–] button.

Frame-by-Frame Playback

slow motion

Remote controller

DVD

VCD

Backward slow-motion playback starts

and “Reverse Slow 1” appears onscreen.

Step/Slow

With the Frame-by-Frame Playback function you can view

individual frames one at a time either forward or backward.

To change the slow-motion speed, press

the Step/Slow [–] button repeatedly to

cycle through the speeds: Reverse Slow 1,

Reverse Slow 2, and so on.

■ Forward

frame-by-

frame

While paused, press the Step/Slow

[+] button.

Press the Step/Slow [+] button or

Pause [ ] button repeatedly to view

subsequent frames.

Remote controller

■ Resume

playback

To resume normal playback, press

the Play [ ] button.

Step/Slow

Remote controller

Play

■ Backward

frame-by-

frame

While paused, press the Step/Slow

[–] button.

Press the Step/Slow [–] button

repeatedly to view previous

frames.

Notes:

• There are four slow motion speeds for DVD-Videos and

three for Video CDs.

Remote controller

Step/Slow

• Backward slow-motion playback is not possible with

Video CDs.

• No sound is output during slow-motion playback.

Adjusting the Display Brightness

■ Resume

playback

To resume normal playback, press

the Play [ ] button.

DVD

VCD

MP3

WMA

JPEG

Remote controller

You can adjust the brightness of the display as follows.

Play

Dimmer

Press the [Dimmer] button repeat-

edly to cycle through the following

options: dim, dimmer, disc tray

light off, normal brightness.

Notes:

Remote controller

• Backward frame-by-frame playback is not possible with

Video CDs.

Dimmer

• You can improve the picture quality of frame-by-frame

playback with the Pause/Still setting (see page 44).

• With some discs, the picture may shake when using back-

ward frame-by-frame playback.

Notes:

• When the display brightness on another Integra/OnkyoAV

• No sound is output during frame-by-frame playback.

component connected via

is changed, the “disc tray

light off” option might not work.

• Prolonged display of the same picture or menu may cause

irreparable damage to your TV screen called screen burn-

in. To prevent this, don’t display the same frame for too

• Even if you selected the “disc tray light off” option, the

disc tray light will come on when the disc tray is opened.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback—Continued

Stop

To stop the slideshow, press the

[Stop] or [Menu] button.

Stop Play/Enter

Standby

Open/

Chain Mode

Depending on the type of JPEG disc,

either the ﬁrst nine pictures appear in

thumbnail-size or the Disc Navigator win-

dow appears.

Search Last

Memory

Chain

Repeat

Mode

Open/Close

Stop

Play

Enter

Chain

Mode

Disc Skip

Pause

Random

Display

Remote controller

Clear

Stop

Top Menu

The slideshow stops automatically when

all pictures have been displayed.

Enter

Return

Setup

-7.5

DPC

Audio Angle Subtitle

Stop

Play

Pause

Play

Stop

Down

Chain

Mode

Step/Slow

Disc

Disc Skip Progressive Dimmer

Using JPEG CDs

Using Chain Mode

The DPC-7.5 supports JPEG CDs, so you can view your pho-

tos on TV either individually or as a slideshow.

DVD

VCD

MP3

WMA

With the Chain mode function you can consecutively play all

discs, all DVD-Videos and Video CDs, or all audio CDs and

MP3/WMA discs as if they were one big disc.

Load and select a CD containing

JPEG pictures.

See “Using the Disc Navigator” on

page 27, and follow the procedure up to

step 4 so that the ﬁrst nine pictures are dis-

played at thumbnail-size before continu-

ing with this procedure.

Press the [Chain Mode] button

repeatedly to select CD, DVD, or

ALL.

The Chain Mode indicator ﬂashes appear

on the display.

Chain

Mode

With some JPEG discs, the ﬁrst nine pic-

tures automatically appear onscreen at

thumbnail-size when the disc is selected.

ALL: All discs are played consecutively.

Remote controller

DVD: All DVD-Videos and Video CDs

are played consecutively.

Chain Mode

Use the Up [ ] and Down [ ] buttons

to display the next or previous folder or

page.

CD: All CDs (audio/MP3/WMA) are

played consecutively.

Use the [ ], [ ], [ ], [ ] buttons to select

a picture, and then press the Play [ ] or

[Enter] button to start the slideshow.

While the Chain Mode indicator is

ﬂashing, press the Play [ ] or

[Enter] button to start Chain mode

playback.

The Chain mode function will be can-

celled if you do not start playback within

ﬁve seconds of pressing the [Chain Mode]

button.

Play

If this folder icon is displayed in the

upper-left corner, selecting it and

pressing [Enter] will open the Disc Navi-

gator window.

Enter

Remote controller

Play

You can use the following func-

tions during the slideshow:

To display the next or previous picture, use

the Up [ ] and Down [ ] buttons.

Enter

To turn a picture upside down, use the [ ]/

[ ] buttons (not while zoomed in).

To rotate a picture clockwise or counter-

clockwise, use the [ ]/[ ] buttons (not

while zoomed in).

Notes:

• With the DVD and All Chain modes, Video CD PBC

menus are ignored.

To pause the slideshow, press the [ ] but-

ton. Press the Play [ ] button to resume.

• JPEG ﬁles are skipped during Chain mode playback.

• With the DVD and All Chain modes, DVD-Video menus

are ignored and titles are played automatically. This may

not work with some discs.

To zoom in or out, use the FF [ ] and FR

[

] buttons. Use the [ ]/[ ] and [ ]/[ ]

buttons to move around the picture while

zoomed in. The slideshow pauses while

zoomed in. To cancel the zoom, press the

Play [ ] button.

• You can’t use the repeat functions with Chain mode play-

back.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback

Notes:

Repeat

Play/Enter

• The Time Search function works only within the currently

playing title (DVD-Video) or track (Video CD, audio CD).

For example, if the current title is one hour long and you

enter the time 1 hour, 30 minutes, nothing will happen.

Open/Close

Stop

Play

Enter

Chain

Mode

Last Memory Repeat

Dimmer

Display

Disc Skip

Pause

• In some cases, playback may start from a slightly different

point to the one you speciﬁed.

• Time Search may not work with some discs.

-7.5

DPC

• You can’t use the [Search] button during random playback.

Standby

Open/

Chain Mode

Repeat Playback

Search Last

Memory

Repeat

DVD

VCD

MP3

WMA

Repeat

Number

buttons

Random

Display

With the Repeat Playback function you can play the current

disc, title, chapter, track, or folder of MP3/WMA ﬁles over-

and-over again.

Clear

Top Menu

Enter

Return

Setup

Press the [Repeat] button repeat-

edly to select a repeat option.

Audio Angle Subtitle

Stop

Play

Pause

Play

Repeat

Down

The currently selected repeat option

appears onscreen and “REPEAT” appears

on the display.

Step/Slow

Disc

Locating Speciﬁc Points in Time

Remote controller

The available options depend on the cur-

rent disc type, as follows:

DVD

VCD

Repeat

With the Time Search function you can locate speciﬁc points

in time.

DVD-Video: Chapter, Title, 1 Disc, All

Disc.

Video CD: 1 Disc, All Disc.

Press the [Search] button twice.

The Disc Navigator Search window

appears onscreen, as shown.

Audio CD: Track, 1 Disc, All Disc.

Remote controller

MP3/WMA: Track, Folder, 1 Disc, All

Disc.

disc

Disc Navigator

no.

Press the Play [ ] button to start

repeat playback.

Disc

6:DVD

Time

-- : -- : --

Remote controller

Play

Use the number buttons to enter a

time.

To enter, for example, 1 hour, 25 minutes,

30 seconds, press the [1], [2], [5], [3], and

[0] buttons.

Remote controller

To cancel Repeat Playback, use the

[Repeat] button to select Off.

Remote controller

Repeat

disc

Disc Navigator

no.

Disc

Time

6:DVD

1:25:30

Notes:

To enter, for example, 2 minutes, 15 sec-

onds, press the [2], [1], and [5] buttons.

• Repeat Playback may not work with some DVD-Videos.

• If you press the [Repeat] button while the Memory Play-

back function is on (see page 34), the current memory list

will play repeatedly.

• With PBCVideo CDs, you can’t select Repeat Playback. In

this case, you need to cancel PBC playback ﬁrst, and then

select Repeat Playback.

disc

Disc Navigator

no.

Disc

6:DVD

Time

0:02:15

• You can’t use the repeat functions with Chain mode play-

back.

Press the Play [ ] button to locate

the speciﬁed point.

Remote controller

• If you select another disc, repeat playback is cancelled.

Playback starts from the speciﬁed point.

Play

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback—Continued

Select a disc.

See page 23.

Play/Enter

Standby

Open/

Chain Mode

Search Last

Memory

Press the [Random] button repeat-

edly to select a random option.

The currently selected random option

appears onscreen and “Random” appears

on the display.

Repeat

Open/Close

Stop

Play

Enter

Chain

Mode

Disc Skip

Pause

Remote controller

A-B

Random

Display

Random

Clear

Top Menu

Clear

Enter

Return

Setup

-7.5

DPC

The available options depend on the cur-

rent disc type, as follows:

Audio Angle Subtitle

Stop

Play

Pause

Play

Down

DVD-Video: Title, 1 Disc, All Disc.

Video CD/audio CD: 1 Disc, All Disc.

Down

Step/Slow

Disc

Disc Skip Progressive Dimmer

MP3/WMA: Folder, 1 Disc, All Disc

(ﬁles in subfolders are not played).

A–B Repeat Playback

With the “Title” option, chapters within

the current title are played at random.

With the “1 Disc” option, all titles, chap-

ters, tracks, and folders on the current disc

are played at random.

DVD

VCD

With the A–B Repeat Playback function you can play a spec-

iﬁed section over-and-over again.

During playback, press the [A–B]

button to set the A point (i.e., the

start of the section you want to

repeat).

“A–” appears onscreen and “R_A”

appears on the display

If you press the [Random] button during

playback, random playback begins after

the current disc, title, chapter, track, or

MP3/WMA folder has ﬁnished.

Remote controller

Play

Enter

Press the Play [ ] button to start

random playback.

Random playback starts.

Press the [A–B] button again to set

the B point (i.e., the end of the sec-

tion you want to repeat).

Remote controller

Playback repeats between the A and B

points, and “A–B” appears onscreen and

“R_AB” appears on the display.

Play

To cancel A–B Repeat Playback,

press the [Clear] button, or use the

[A–B] button to select Off.

To cancel random playback, use

the [Random] button to select Off.

Remote controller

Clear

Random

Notes:

• To select the next random disc, title, chapter, track, or

MP3/WMA folder during random playback, press the Next

Notes:

• A–B Repeat Playback may not work with some DVD-Vid-

eos and PBC Video CDs.

[

] button.

• Random playback may not work with some DVD-Videos.

• In some cases, the A and B points may be at slightly differ-

ent points to the ones you speciﬁed.

• With PBC Video CDs, you can’t use this function. Cancel

PBC playback ﬁrst, and then set this function.

• If you select a different camera angle during A–B repeat

playback, the original camera angle will be selected when

playback restarts from the A point.

• Random playback cannot be used with the Memory Play-

back function.

• You can’t use the [Search] button during random playback.

• During random playback, the remote controller’s naviga-

tion [ ], [ ], [ ], [ ] buttons don’t work in the Disc Nav-

igator.

Random Playback

DVD

VCD

MP3

WMA

• If you select another disc, random playback is cancelled,

except when the random option is set to “All Disc,” in

which case playback continues.

With the Random Playback function you can enjoy a random

selection of discs, titles, chapters, tracks, or MP3/WMA

folders.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback—Continued

Repeat steps 2 and 3 to add more

items to the memory list.

New items will be added to the memory

list as steps 02, 03, and so on.

Standby

Open/

Chain Mode

Search Last

Memory

Clear

Repeat

Number

buttons

Random

Display

To play the memory list, press the

Play [ ] button.

Clear

Top Menu

Remote controller

Enter

The Memory Play Setup window must be

open when you press the Play [ ] button.

Enter

Play

Return

Setup

Audio Angle Subtitle

Stop

Play

Pause

Play

Angle

Down

Step/Slow

Disc

Memory Playback

To stop playback, press the Stop

[ ] button.

DVD

VCD

MP3

WMA

JPEG

Remote controller

Stop

With the Memory Playback function you can create your

own memory list of titles, chapters, and tracks.

Press the [Memory] button.

The Memory Play Setup window appears

Remote controller

To insert a new item into the mem-

ory list, use the [ ]/[ ] buttons to

select the list, use the [ ]/[ ] but-

tons to select the step before which

you want to insert the new item,

and then press the [Enter] button.

onscreen, as shown.

Memory

Remote controller

Disc Navigator

Memory Play Setup

Enter

Memory List

Title/Folder

6:DVD Current/Total 001/ --- Current/Total --- / ---

No. Disc

Chapter/Track

01. - : ---

02. - : ---

03. - : ---

--- / ---

The cursor moves to the top row and the

selected step remains highlighted.

Disc Navigator

The top row ( ) is used to enter disc, title/

folder, and chapter/track numbers. Steps

in the memory list are numbered sequen-

tially.

Memory Play Setup

Memory List

Title/Folder

6:DVD Current/Total 001/ --- Current/Total --- / ---

No. Disc

Chapter/Track

01. 6:DVD

02. - : ---

03. 6:DVD

001/ ---

--- / ---

001/ ---

003/ ---

--- / ---

003/ ---

Enter the disc, title/folder, and

chapter/track numbers of the item

you want to add to the memory list.

Use the remote controller’s [ ]/[ ] but-

tons to select the parameters, and use the

[ ]/[ ] buttons to select numbers from

001 to 999.

Enter the disc, title/folder, and

chapter/track numbers of the item

to be inserted.

Remote controller

Enter

Press the [Enter] button.

The new item is inserted into the memory

list and subsequent items move down the

list.

The number of the currently selected disc

is already entered.

You can enter numbers directly by using

the remote controller’s number buttons.

To delete a step, use the [ ]/[ ] but-

tons to select the list, use the [ ]/

[ ] buttons to select it, and then

press the [Clear] button.

The item is deleted and subsequent items

move up the list.

Remote controller

To add the all titles, folders, chapters, or

tracks on the disc, select the top row ( ),

and then press the [ ] button.

Enter

Press the [Enter] button.

The new item is added to the memory list

as step 01.

Clear

Remote controller

Enter

Disc Navigator

Memory Play Setup

Memory List

Title/Folder

6:DVD Current/Total 001/ --- Current/Total --- / ---

No. Disc

Chapter/Track

01. 6:DVD

02. - : ---

03. - : ---

001/ ---

--- / ---

003/ ---

--- / ---

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback—Continued

Selecting Camera Angles

To edit a step, use the [ ]/[ ] but-

tons to select the list, use the [ ]/

[ ] buttons to select the step, and

then use the [ ]/[ ] buttons to

select the top row ( ) again.

Edit the disc, title/folder, and chap-

ter/track numbers, and then press

the [Enter] button.

DVD

Remote controller

Some DVD-Videos feature multiple camera angles that

allows you to view scenes from different angles. If the cur-

rently playing DVD-Video features multiple camera angles,

the camera indicator appears on the display. Such a disc

usually has the multiple camera angle logo ( ) printed on its

sleeve notes.

Enter

To close the Memory Play Setup

window, press the [Memory] but-

ton.

Remote controller

Press the [Angle] button repeatedly

to cycle through the available cam-

era angles.

Remote controller

Angle

Memory

The number of the currently selected

camera angle appears onscreen. For

example, on a disc with three camera

angles, you’d see 1/3, 2/3, and 3/3.

Notes:

• The entire memory list is cleared when the DPC-7.5 is set

to Standby.

Notes:

• With PBC Video CDs, you can’t use this function. Cancel

PBC playback ﬁrst, and then set this function.

• With some DVD-Videos you may not be able to select dif-

ferent camera angles even though the camera indicator

is displayed.

• A playlist of MP3/WMA ﬁles can be made using the Disc

Navigator (see page 27).

• With some DVD-Videos you can select camera angles

from a menu.

• Some DVD-Videos won’t allow you to select different

camera angles while playback is paused.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback—Continued

Remote controller

During playback, press the [Subti-

tle] button repeatedly to cycle

through the available subtitles.

Subtitle

Standby

Open/

Chain Mode

Search Last

Memory

Repeat

The name of the selected subtitle appears

onscreen for several seconds.

Random

Display

To turn off subtitles, use the [Subtitle] but-

ton to select Off.

Clear

Top Menu

Enter

Return

Setup

Notes:

Audio Angle Subtitle

Audio

Subtitle

Stop

Play

Pause

• With DVD-Videos, when you stop playback and cancel the

Resume function (see page 23), or select another disc, the

subtitle language will revert to your default subtile lan-

guage (see page 43), or the disc’s default subtitle language.

Down

Step/Slow

Disc

Disc Skip Progressive Dimmer

Progressive

• With some DVD-Videos you can select subtitles from a

menu, and you may not be able to select subtitles during

playback.

RC-543DV

• To check the subtitle language currently selected, press the

[Subtitle] button once. The current setting will appear

onscreen for several seconds.

Selecting Languages & Audio Formats

DVD

VCD

Some DVD-Videos feature soundtracks in several languages

and audio formats (e.g., Dolby Digital or DTS). Music

DVD-Videos sometimes feature soundtracks in several audio

formats, such as PCM or Dolby Digital 5.1. See the disc’s

sleeve notes for details.

Using Progressive Scanning

With the Progressive Scanning function you can enjoy better

picture quality. To use Progressive Scanning, your TV or pro-

jector must support progressive scanning and you must con-

nect it to the DPC-7.5’s component video outputs (see

page 17).

Remote controller

During playback, press the [Audio]

button repeatedly to cycle through

the available soundtracks.

Audio

Press the [Progressive] button.

Progressive scanning is enabled and the

Remote controller

The name of the selected soundtrack

appears onscreen for several seconds.

Progressive

PRGV indicator appears on the display.

For Video CDs, you can select stereo,

Mono L (left), or Mono R (right).

To turn off progressive scanning,

press the [Progressive] button

again.

Notes:

Remote controller

• With DVD-Videos, when you stop playback and cancel the

Resume function (see page 23), or select another disc, the

soundtrack language will revert to your default language

(see page 43), or the disc’s default language.

Progressive

The PRGV indicator disappears.

• With some discs, selecting another soundtrack may cause

the picture to skip momentarily.

Notes:

• If your TV or projector doesn’t support progressive scan-

ning and it’s connected to the DPC-7.5’s component video

outputs, if you turn on the Progressive Scanning function,

you’ll get no picture.

• To listen to just the accompaniment on a karaoke CD,

select the Mono L (left) or Mono R (right) channel. See the

disc’s sleeve notes for details.

• With some DVD-Videos you need to select soundtracks

from a menu, and you may not be able to select other

soundtracks during playback.

• The S-Video and composite video outputs are not affected

by the Progressive Scanning function.

• Progressive scanning cannot be turned on or off during

playback. You must stop playback ﬁrst.

• Progressive scanning cannot be turned on or off while the

Disc Navigator is displayed.

Selecting Subtitles

DVD

• See also the Progressive Setting on page 41.

• On theAustralian model, progressive scanning can be used

with NTSC format discs. To do this, set the PAL Output

Setting to “AUTO,” start playback of an NTSC disc, stop

playback, and then turn on the Progressive Scanning func-

tion.

Some DVD-Videos feature subtitles in several languages.

See the disc’s sleeve notes for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback—Continued

To resume playback from last mem-

ory point, select “Yes,” and then

press [Enter].

Last Memory

Display

Stop Play/Enter

Remote controller

To start playback from the beginning,

select “No,” and then press [Enter].

Enter

Open/Close

Stop

Play

Enter

Chain

Mode

Last Memory Repeat

Dimmer

Display

Disc Skip

Pause

To start playback from the beginning and

delete the last memory point, select

“Memory Clear,” and then press [Enter].

-7.5

DPC

Notes:

• The Last Memory function can store the settings for up to

six DVD-Videos. When you set the Last Memory function

for a seventh disc, the ﬁrst disc’s settings are lost.

Standby

Open/

Chain Mode

Search Last

Memory

Repeat

Last M

• The Last Memory function can remember the settings for

oneVideo CD, and those settings will be lost when another

disc is selected.

Random

Display

Clear

Display

Play

Top Menu

Enter

Stop

• The Last Memory function may not work properly with

some PBC Video CDs.

Enter

Return

Setup

Audio Angle Subtitle

• The Last Memory function will not work while a menu is

being displayed onscreen.

Stop

Play

Pause

Down

Step/Slow

Disc

• The Last Memory function may not work with some

DVD-Videos.

• Even if you select another disc, or inadvertently turn off the

DPC-7.5 during playback, you can resume playback from

the same point when you select the disc again.

Using Last Memory

DVD

VCD

With the Last Memory function you can resume playback

from where you left off even if another disc has been selected

or the disc has been removed. Last Memory also remembers

the soundtrack and subtitle languages that you were using.

Last Memory

During playback,press the [Last M]

button.

The last memory point for the disc is

stored, the LAST indicator appears, and

Remote controller

“LAST MEM” appears on the display.

Last M

If the [Last M] button is pressed again, the

last memory point will be updated.

Stop

To stop playback, press the Stop

[ ] button once or twice.

At this point you may choose to

play another disc, or to turn off the

DPC-7.5.

Remote controller

Stop

Play

To resume playback,select the disc

and press the Play [ ] button.

The Last Memory dialog box appears, as

Enter

shown.

Remote controller

Last Memory is set.

Play

Start playback from memory location ?

Yes

Memory Clear

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Playback—Continued

Displaying Information

You can display various information about the current disc,

title, chapter, or track as follows.

During playback, press the [Dis-

play] button.

Various information appears onscreen.

Display

The operating status (e.g., Stop, Play,

Resume), disc number, and disc type

information is displayed along the top of

Remote controller

the screen.

Display

The other information depends on the

type of disc currently selected, as follows:

DVD-Video: Current title number, total

number of titles on disc, elapsed title time,

remaining title time, total title time,

selected soundtrack, selected subtitle, and

the number of available camera angles.

Video CD, audio CD: Current track

number, total number of tracks, elapsed

track time, remaining track time, and total

track time.

MP3/WMA disc: Track name, current

track, elapsed track time, folder name,

current folder, total number of tracks,

total number of folders.

Press the [Display] button again to

see more information.

DVD-Video: Current chapter number,

Display

total number of chapters in title, elapsed

chapter time, remaining chapter time,

total chapter time, and bit rate.

Remote controller

Video CD, audio CD: Current track

number, total number of tracks, elapsed

Display

disc time, remaining disc time, and total

disc time. (Does not work with PBC

Video CDs.)

MP3/WMA disc: Title, artist name,

album name, year, genre, comment.

Display

Press the [Display] button again to

cancel the information display.

Remote controller

Display

If the current disc is an MP3/WMA

disc, and you want to open the Disc

Navigator, press the [Display] but-

ton again.

Remote controller

Display

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5

This chapter explains the various functions and settings of

the onscreen setup menus.

The following table lists all the functions and settings, with a

brief description and page number where you can ﬁnd full

details.

Functions and settings are arranged into six menus: Picture,

Audio, Language, Display, Operation Setting, and Initial.

Setting

Description

Page #

TV Shape

Select a picture format to match the aspect ratio of your TV.

Adjust the picture quality for interlaced scanning.

Adjust the picture quality for progressive scanning.

Picture

Interlaced Setting

Progressive Setting

PAL Output Setting

(Australian model only)

Specify how the DPC-7.5 outputs video signals when playing NTSC discs.

Dolby Digital Out Select whether or not the DPC-7.5 downmixes Dolby Digital digital audio.

Linear PCM Out Select whether or not the DPC-7.5 downsamples 96 kHz digital audio.

Audio

Digital Out

MPEG Out

Digital Out

Select whether or not the DPC-7.5 downmixes MPEG digital audio.

Turn on or off the digital audio outputs.

Dynamic Range Control

(Dolby Digital only)

Set the Dynamic Range function.

On-Screen Language

Disc Menu Language

Audio Language

Subtitle

Select a language for the onscreen setup menus and messages.

Select your preferred language for disc menus.

Select your preferred language for soundtracks.

Select your preferred language for subtitles.

Turn on or off onscreen messages and indicators.

Select a color for onscreen setup menus and messages.

Select a background color for when playback is stopped.

Set the Screen Saver function.

Language

Display

On-Screen Display

On-Screen Display Color

Background

Screen Saver

Pause/Still

Select Auto or Frame for still pictures.

Operation

Setting

Parental Lock

PBC

Set the Parental Lock function.

Turn on or off PBC (Playback Control) functions for Video CDs.

Auto Power Off

Set the Auto Power Off function.

TV Shape

Initial Setup

This menu appears automatically the very ﬁrst time you turn on your DPC-7.5.

(These settings are available in other menus.)

On-Screen Language

Digital Out

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5—Continued

Press the [Return] button to move

the preceding setup menu.

Random

Display

Remote controller

Clear

Top Menu

Return

Enter

Return

Setup

Return

Audio Angle Subtitle

Stop

Play

Pause

Down

Step/Slow

Disc

Picture Menu

Using the Onscreen Setup Menus

TV Shape

DVD

This section explains how to use the onscreen setup menus.

With this setting you can select a picture format to match the

aspect ratio of your TV.

Turn on your DPC-7.5 and TV.

On your TV, select the video input to

which the DPC-7.5 is connected.

4:3 Letter box (default): Choose this option if you have

a standard TV (4:3 aspect ratio). When you watch wide-

screen DVD-Video movies, the entire picture will be vis-

ible and there will be black bars at the top and bottom of

the screen, as shown.

Press the [Setup] button.

The onscreen setup menu appears, as

shown.

Remote controller

Setup

Picture

Widescreen DVD movie

on standard TV with

TV Shape

Interlaced Setting

"4:3 Letter box" setting

Progressive Setting

4:3 Normal (Pan & Scan): Choose this option if you

have a standard TV (4:3 aspect ratio) and want to use the

full height of the screen when watching widescreen

DVD-Video movies. In order to use the full height of the

screen, the picture will be cropped on both sides, as

shown. This option won’t work with discs that don’t support

pan and scan.

Use the remote controller’s naviga-

tion buttons to navigate the menus.

Use the [ ]/[ ] buttons to move left or

right. Use the [ ]/[ ] buttons to move up

or down.

Remote controller

Enter

Widescreen DVD movie

on standard TV with

"4:3 Normal" setting

When you’ve selected an item,

press the [Enter] button to see the

available options.

16:9 Widescreen: Choose this option if you have a wide-

Remote controller

screen TV (16:9 aspect ratio).

Enter

16:9 Compressed: Choose this option if you have a

widescreen TV (16:9 aspect ratio) and the picture appears

stretched when watching programs in 4:3 format, as

shown. Some widescreen TVs have a setting to correct

this. If your TV doesn’t, and 4:3 programs appear

stretched, select this option to correct the problem.

Use the navigation buttons to

select the options, and press the

[Enter] button to conﬁrm your

selection.

Remote controller

Enter

4:3 program on widescreen TV

with "16:9 Compressed" setting

When you’ve ﬁnished, press the

[Setup] button again.

Notes:

• With some DVD-Videos this setting may have no effect.

See the disc’s sleeve notes to see which picture format is

used.

Remote controller

The onscreen setup menu closes.

Setup

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5—Continued

There are three memories (1, 2, 3) for storing your favorite

settings. You could, for example, use one for daytime view-

ing (e.g., sun shining through window) and one for nighttime

viewing (e.g., curtains drawn, lights down).

Random

Display

Clear

Top Menu

Enter

Return

Setup

Parameter

Contrast

Brightness

Color

Range

Setup

Return

Audio Angle Subtitle

–7...0...+7

0...+8

Stop

Play

Pause

Down

Step/Slow

Disc

Tint

Interlaced Setting

Sharpness

Skin Tone Compensation –7...0...+7

DVD

With these settings you can adjust various picture quality

parameters for interlaced scanning, including black level,

contrast, brightness, color, and so on.

Select Progressive Setting 1, 2, or

3, and then press the [Enter] or [ ]

button.

Remote controller

There are three memories (1, 2, 3) for storing your favorite

settings. You could, for example, use one for daytime view-

ing (e.g., sun shining through window) and one for nighttime

viewing (e.g., curtains drawn, lights down).

The parameters appear onscreen.

Enter

The parameters are as follows.

Use the [ ]/[ ] buttons to select the

parameters, press the [Enter] but-

ton, and use the [ ]/[ ] buttons to

set them.

Parameter

Contrast

Brightness

Color

Range

Remote controller

–7...0...+7

0...+8

Enter

Tint

Sharpness

Skin Tone Compensation –7...0...+7

When you’ve ﬁnished, press the

[Setup] button.

The settings are stored.

Dark, Normal (U.S. model only)

Video Black Level

Remote controller

Normal, Light (Australian model only)

Setup

Select Interlaced Setting 1, 2, or 3,

and then press the [Enter] or [ ]

button.

Remote controller

The parameters appear onscreen.

Notes:

Enter

• These settings are used only when the Progressive function

is on.

Use the [ ]/[ ] buttons to select the

parameters, press the [Enter] but-

ton, and use the [ ]/[ ] buttons to

set them.

PAL Output Setting (Australian model only)

Remote controller

DVD

VCD

With this setting you can specify how the DPC-7.5 outputs

video signals when playing NTSC format DVD-Videos or

Video CDs.

Enter

AUTO (default): Use this option to watch PAL and NTSC

format discs. The DPC-7.5 does not convert the video for-

mat. When you play a PAL disc, the video output will be

PAL format. And when you play an NTSC disc, it’ll be

NTSC format. Your TV must support NTSC playback in

order to watch NTSC format discs.

When you’ve ﬁnished, press the

[Setup] button.

The settings are stored.

Remote controller

Setup

Notes:

PAL: Use this option if your TV doesn’t support NTSC

playback, or the picture is distorted when watching

NTSC discs. The DPC-7.5 will convert NTSC format

video signals to PAL-compatible format.

• These settings are used only when the Progressive function

is off.

Notes:

Progressive Setting

• This setting can be changed only when playback is

stopped.

DVD

With these settings you can adjust various picture quality

parameters for progressive scanning, including black level,

contrast, brightness, color, and so on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5—Continued

■ Digital Out

Audio Menu

DVD

VCD

MP3

WMA

With this setting you can turn the coaxial and optical digital

audio outputs on or off.

Digital Out

With these settings you can specify how the DPC-7.5 outputs

digital audio signals. The options you choose will depend on

the type of AV component that you connect to the DPC-7.5’s

digital audio outputs.

Depending on how you connect the DPC-7.5 to your other

AV components, there may be situations where it’s helpful to

be able to turn off the digital audio outputs.

On (default): Digital audio signals are output by the

coaxial and optical digital audio outputs.

■ Dolby Digital Out

DVD

Off: Nothing is output by the coaxial and optical digital

audio outputs.

With this setting you can conﬁgure the DPC-7.5 to output

Dolby Digital audio as it is or downmix it to 2-channel PCM.

Notes:

If you’re connecting the DPC-7.5’s digital audio outputs to

an AV component with a built-in Dolby Digital decoder,

select Dolby Digital. If you’re connecting to a hi-ﬁ amp with

a digital input, an AV receiver with a built-in Dolby Pro

Logic decoder, or an external D/A converter, select Dolby

Digital > PCM.

• This setting has no effect on the analog audio outputs.

Dynamic Range Control (Dolby Digital only)

DVD

Dolby Digital (default): Dolby Digital audio is output as

it is.

With the Dynamic Range Control function you can reduce

the dynamic range of Dolby Digital material so that you can

still hear quiet parts even when listening at low volume lev-

els—ideal for watching movies late at night when you don’t

want to disturb anyone.

Dolby Digital > PCM: Dolby Digital audio is downmixed

and output as 2-channel PCM digital audio.

■ Linear PCM Out

DVD

Off (default): The full dynamic range is preserved.

On: The dynamic range of Dolby Digital material is com-

pressed.

With this setting you can conﬁgure the DPC-7.5 to output

digital audio with higher sampling rates (e.g., 96 kHz) as it is

or downsample it to 48 kHz.

Notes:

• The impact of the Dynamic Range Control function

depends on the Dolby Digital material that you are playing

and with some material there will be little or no effect.

If the AV component you connect to the DPC-7.5’s digital

audio outputs supports 96 kHz digital audio, select Down

Sample Off. Otherwise, select Down Sample On.

Down Sample On (default): 96 kHz digital audio is

downsampled and output at 48 kHz.

Language Menu

Down Sample Off: 96 kHz digital audio is output as it is.

On-Screen Language

Notes:

DVD

VCD

MP3

WMA

JPEG

• Some copy-protected DVD-Videos may use 96 kHz digital

audio only for A/D conversion to the analog audio outputs.

With this setting you can select a language for the onscreen

setup menus and messages.

• With some discs, even if you select Down Sample Off, the

digital audio will be downsampled to 48 kHz, and in some

cases may not be output by the DPC-7.5’s digital audio

outputs.

English (default): English.

Français: French.

Español: Spanish.

Deutsch: German.

Italiano: Italian.

■ MPEG Out

DVD

VCD

With this setting you can conﬁgure the DPC-7.5 to output

MPEG digital audio as it is or downmix it to PCM.

If you’re connecting the DPC-7.5’s digital audio outputs to

an AV component with a built-in MPEG decoder, select

MPEG. Otherwise, select MPEG > PCM.

MPEG (default): MPEG digital audio is output as it is.

MPEG > PCM: MPEG digital audio is downmixed and

output as PCM digital audio.

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5—Continued

German:

Italian:

Disc Menu Language

DVD

With this setting you can select your preferred language for

disc menus. When you play a DVD-Video with multiple lan-

guage disc menus, your preferred language will be selected

automatically.

No Subtitle: No subtitles will be displayed. This option

is useful with DVD-Videos that always display subtitles.

Others: See “Selecting Other Languages” on page 45.

Notes:

English (default):

• Not all DVD-Videos have subtitles.

French:

• Even if a DVD-Video has subtitles in multiple languages,

this setting may not always work.

Spanish:

• If a DVD has only one subtitle language, that will be used.

German:

• With some DVD-Videos you can select subtitles from a

menu.

Italian:

Others: See “Selecting Other Languages” on page 45.

Notes:

Display Menu

• Not all DVD-Videos have menus in multiple languages.

• Even if a DVD-Video has menus in multiple languages,

this setting may not always work.

On-Screen Display

DVD

• If a DVD has only one menu language, that will be used.

With this setting you can turn on or off onscreen messages,

such as “Play,” “Stop,” and “Resume.”

• With some DVD-Videos you can select languages from a

menu.

Off: Onscreen messages are not displayed.

On (default): Onscreen messages are displayed.

Audio Language

DVD

On-Screen Display Color

With this setting you can select your preferred language for

soundtracks. When you play a DVD-Video with multiple lan-

guage soundtracks, your preferred language will be selected

automatically.

DVD

VCD

MP3

WMA

JPEG

With this setting you can set the color and theme of the Disc

Navigator window.

English (default):

Pearl (default):

Sapphire:

Amethyst:

Garnet:

French:

Spanish:

German:

Italian:

Others: See “Selecting Other Languages” on page 45.

Background

Notes:

DVD

VCD

MP3

WMA

• Not all DVD-Videos have soundtracks in multiple lan-

guages.

With this setting you can select the color of the background

that’s displayed when the DPC-7.5 is stopped.

• Even if a DVD-Video has soundtracks in multiple lan-

guages, this setting may not always work.

Blue:

Gray:

• If a DVD has only one soundtrack, that will be used.

• With some DVD-Videos you can select languages from a

menu.

Graphic (default): The theme picture speciﬁed for the

On-Screen Display Color setting is used.

Subtitle

DVD

With this setting you can select your preferred language for

subtitles. When you play a DVD-Video with multiple lan-

guage subtitles, your preferred language will be selected

automatically.

English (default):

French:

Spanish:

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5—Continued

Screen Saver

Use the [ ]/[ ] buttons to specify

the parental lock level from 1

through 8, and then press [Enter].

DVD

VCD

MP3

WMA

JPEG

Remote controller

With the Screen Saver function you can protect your TV

against screen burn-in, which can occur when the same

image or menu is displayed for a long time.

The parental lock is now set.

Enter

The parental lock levels conform to U.S.

movie ratings as follows:

Off: Screen saver off.

• Level 7: NC-17

• Level 6: R

• Level 4: PG13

• Level 3: PG

• Level 1: G

On (default): Screen saver on.

When the Screen Saver function is set to On, and DVD-Video

or Video CD playback is paused or stopped for 15 minutes,

the Screen Saver function automatically displays a moving

image.

Once the screen saver has been activated, you can cancel it

by pressing either the Play [ ] button or Pause [ ] button.

When you’ve ﬁnished, press the

[Setup] button.

The settings are stored.

Remote controller

Notes:

Setup

• The Screen Saver function also works with audio CDs and

MP3/WMA discs. If you leave playback paused for ﬁve

minutes, the screen saver will activate.

Notes:

Operation Setting Menu

• When entering a security code, you can use the [Clear] but-

ton to delete the numbers entered so far, if necessary.

Pause/Still

• This setting can be changed only when playback is

stopped.

DVD

The Pause/Still setting determines how still pictures are dis-

played when DVD-Video playback is paused or when using

frame-by-frame playback.

• Once this setting has been turned on and a security code

set, if you want to turn off parental lock, or change the

parental lock level, you’ll be prompted to enter the security

code.

Auto (default): A frame or ﬁeld is displayed depending

• Not all discs use parental lock. See the disc’s sleeve notes

for details.

on the disc.

Frame: A frame is displayed.

• Discs with parental lock may cut certain scenes, replace

certain scenes with children-friendly scenes, or prevent

playback of the entire disc.

TV pictures are made up of ﬁelds, and there are two ﬁelds per

picture (frame). In general, the Frame option will provide the

best picture quality, although in some cases the picture may

appear slightly blurred. Since a ﬁeld has only half as much

information, the picture quality will be lower, but it won’t be

blurred.

• If you forget the security code, instead of entering the num-

bers, press the Stop [ ] button four times.

• When using a disc that uses parental control to restrict

playback, occasionally, depending on the DPC-7.5’s oper-

ating status, you may not be able to remove the disc by

using the [Open/Close] button. If this does occur, close the

disc tray, use the [Disc Skip] button to select another disc

bay, open the tray again, and then remove the disc.

Parental Lock

DVD

With the Parental Lock function you can block access to cer-

tain scenes that the authors have ﬂagged as being unsuitable

for children.

PBC

VCD

Select Parental Lock–>On, and

With the PBC setting you can enable or disable PBC (Play-

back Control) functions on Video CDs.

then press the [Enter] button.

The Security Code box appears onscreen.

Remote controller

Enter

Off: PBC functions disabled.

On (default): PBC functions enabled.

Notes:

Use the number buttons to enter a

• PBC functionality varies from disc-to-disc. See the disc’s

sleeve notes for details.

4-digit security code, and then

press [Enter].

The Level box appears onscreen.

Remote controller

• Not all PBC Video CDs use all of the PBC functions sup-

ported by the DPC-7.5.

Enter

Download from Www.Somanuals.com. All Manuals Search And Download.

Conﬁguring the DPC-7.5—Continued

Auto Power Off

Language Code List

DVD

VCD

MP3

WMA

JPEG

Use this list when specifying other languages.

With the Auto Power Off function the DPC-7.5 will turn

itself off automatically if about 20 minutes have elapsed

without any operation after stopping playback.

Language

Japanese

English

French

German

Italian

Code

Language

Kirghiz

Latin

Code

Lingala

Off (default): Auto Power Off function is off.

On: Auto Power Off function on.

Laothian

Lithuanian

Latvian

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Spanish

Chinese

Dutch

Portuguese

Swedish

Russian

Korean

Initial Setup Menu

This menu appears automatically the very ﬁrst time you turn

on the DPC-7.5. See “First Time Setup” on page 21 for more

information.

Greek

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

Bhutani

Esperanto

Estonian

Basque

Persian

Finnish

Selecting Other Languages

Nepali

This section explains how to select other languages for disc

menus, audio, and subtitles.

Norwegian

Occitan

Oromo

Oriya

Panjabi

Polish

Select“Others”from the Disc Menu

Language, Audio Language, or

Subtitle menu, and then press

[Enter].

Remote controller

Pashto, Pushto

Quechua

Rhaeto-Romance

Kirundi

Romanian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo-Croatian

Sinhalese

Slovak

Slovenian

Samoan

Shona

Enter

The language code boxes appear.

Use the remote controller’s [ ]/[ ]

buttons to select the code boxes.

Use the [ ]/[ ] buttons to enter a

language code.

Remote controller

Enter

See adjacent table for language codes.

When you’ve ﬁnished, press the

[Enter] button.

Somali

Fiji

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swahili

Tamil

Telugu

Tajik

Thai

Remote controller

Faroese

Frisian

Irish

Scots-Gaelic

Galician

Guarani

Gujarati

Hausa

Enter

Hindi

Croatian

Hungarian

Armenian

Interlingua

Interlingue

Inupiak

Indonesian

Icelandic

Hebrew

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Kashmiri

Kurdish

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapük

Wolof

Xhosa

Yoruba

Zulu

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Symptom

Possible cause

Remedy

Connect the power cord to a suitable wall outlet

(page 21).

The power cord is not connected.

Can’t turn on the DPC-

7.5?

Turn off the DPC-7.5, wait ﬁve seconds, then try

External interference is affecting the DPC- turning it on again. If that fails, disconnect the

7.5’s digital circuitry.

power cord from the wall outlet, wait ﬁve seconds,

reconnect it, then try turning it on again.

The wrong input source is selected on your On your TV, select the input to which the DPC-7.5

TV.

is connected (page 17).

No picture?

No sound?

Check the video cable and correct as necessary

(page 17).

The video cable is not connected properly.

The wrong input source is selected on your On your hi-ﬁ amp or AV receiver, select the input

hi-ﬁ amp or AV receiver.

to which the DPC-7.5 is connected (page 18).

Check the audio cable and correct as necessary

(page 18).

The audio cable is not connected properly.

The hi-ﬁ amp or AV receiver connected to

the DPC-7.5’s audio outputs is not on.

Turn on the hi-ﬁ amp or AV receiver.

Check the Digital Out setting and correct as nec-

essary (page 42).

The Digital Out setting is incorrect.

The disc is dirty.

Remove the disc and clean it (page 8).

The picture distorts

occasionally?

You’re using the Fast Forward or Fast

Reverse function.

A little picture distortion may occur when using

these functions. This is normal.

The DPC-7.5 is connected to your TV via a

VCR or other video equipment and its copy

protection system is affecting the picture.

Picture instability or

noise?

Connect the DPC-7.5 directly to your TV

(page 17).

No discs loaded.

Load some discs (page 22).

The selected disc cannot be played because

it’s incompatible.

Load only compatible discs (page 7).

Load the disc the correct way up (page 22).

The disc is upside down.

The disc is not centered in the disc bay.

The disc is dirty.

Can’t start playback?

Place the disc in the center of the disc bay

(page 22).

Remove the disc and clean it (page 8).

The selected disc has parental lock and the

Parental Lock function is on.

Turn off the Parental Lock function (page 44).

The disc is not ISO 9660 Level 2 format.

The disc has not been ﬁnalized.

Use only ISO 9660 Level 2 format discs (page 8).

Finalize the disc (page 8).

Can’t play MP3/WMA/

JPEG discs?

MP3 ﬁles without a “.mp3” or “.MP3” ﬁle-

name extension are not recognized.

Use the correct ﬁlename extension (page 8).

Can’t select MP3 ﬁles?

The DPC-7.5 doesn’t fully support multisession

discs. Only ﬁles in the ﬁrst session can be played

(page 8).

The MP3 disc is a multisession disc.

WMA ﬁles without a “.wma” or “.WMA” or

“.ASF” ﬁlename extension are not recog-

nized.

Use the correct ﬁlename extension (page 8).

Don’t use the copyright option (page 8).

Can’t play WMA ﬁles?

The WMA ﬁle’s copyright option is on.

The DPC-7.5 doesn’t fully support multisession

discs. Only ﬁles in the ﬁrst session can be played

(page 8).

The WMA disc is a multisession disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting—Continued

Symptom

Possible cause

Remedy

JPEG ﬁles without a “.jpg” or “.JPG” or

“.JPEG” ﬁlename extension are not recog- Use the correct ﬁlename extension (page 8).

nized.

Only Baseline JPEG ﬁles are supported.

Use Baseline JPEG ﬁles (page 8).

Progressive JPEG ﬁles are not.

Can’t view JPEG ﬁles?

Only JPEG ﬁles with the following bright-

ness/color difference ratios are supported:

4:4:4, 4:2:2, and 4:1:1.

Use JPEG ﬁles with the supported ratio (page 8).

Use JPEG ﬁles that are less than 5 megabytes

(page 8).

The JPEG ﬁle is too big.

The message “NO

PLAY” appears on the

display?

The disc is dirty.

Remove the disc and clean it (page 8).

Turn off the DPC-7.5, wait ﬁve seconds, then turn

it on again. If that doesn’t resolve the issue, dis-

connect the power cord from the wall outlet, wait

ﬁve seconds, reconnect it, then try again.

Buttons on the DPC-7.5 Power supply voltage ﬂuctuations and other

and remote controller

don’t work?

anomalies, such as static electricity, can

interfere with normal operation.

There are no batteries in the remote

controller.

Install new batteries (page 15).

The batteries are ﬂat.

Replace with new batteries (page 15).

Check the batteries and correct as necessary

(page 15).

The batteries are installed incorrectly.

You’re not pointing the remote controller at Point the remote controller at the DPC-7.5’s

Buttons on the DPC-7.5 the DPC-7.5’s remote sensor.

remote sensor (page 15).

work OK but those on

the remote controller

don’t?

Use the remote controller closer to the DPC-7.5

(page 15). The remote controller has a range of

approximately 16 ft. (5 meters).

You’re too far away from the DPC-7.5.

Make sure that the DPC-7.5 is not subjected to

direct sunshine or inverter-type ﬂuorescent lights.

Relocate if necessary.

A strong light source is interfering with the

DPC-7.5’s remote sensor.

If the DPC-7.5 is installed in a cabinet with

colored glass doors, the remote controller

may not work reliably when the doors are

closed.

Open the doors, or use a cabinet without colored

glass.

■ Abnormal Behavior

The DPC-7.5 contains a microcomputer for signal processing and control functions. In very rare situations, severe interfer-

ence, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen,

unplug the power cord from the wall outlet, wait at least ﬁve seconds, and then plug it back in again. Alternatively, press and

hold the Stop [ ] button until “RESET” appears on the display (about 10 seconds).

■ Restoring the Default Settings

To reset the DPC-7.5 to its factory defaults, turn it on and, while holding down the Stop [ ] button, press the [Standby/On]

button. “INITIALIZE” appears on the display. When the reset is complete, “COMPLETE” is displayed, and the DPC-7.5

enters Standby mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Standard NTSC (U.S. model), PAL/AUTO (Australian model)

1 (U.S. model), 4 (Australian model)

Video system

Region code

Laser

Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD)

4 Hz–22 kHz @ 48 kHz sampling rate

4 Hz–44 kHz @ 96 kHz sampling rate

DVD linear audio

CD audio

Frequency response

4 Hz–20 kHz

100 dB

Signal-to-noise ratio (digital audio)

Audio dynamic range (digital audio)

Harmonic distortion (digital audio)

Wow and ﬂutter

93 dB

0.006%

Below measurable level

5° to 35° C (41° F to 95° F)

Install horizontally

Temperature

Operating conditions

Installation

Y: 1.0 V (p–p), 75 Ω, negative sync, RCA/phono x1, BNC x1

PB/PR: 0.7 V (p–p), 75 Ω

COMPONENT VIDEO

Y: 1.0 V (p–p), 75 Ω, negative sync, 4-pin mini DIN x2

C: 0.286 V (p–p), 75 Ω

Video outputs

Audio outputs

S VIDEO (S-Video)

1.0 V (p–p), 75 Ω, negative sync, RCA/phono x2

–22.5 dBm, optical connector x1

VIDEO (composite video)

OPTICAL

0.5 V (p–p), 75 Ω, RCA/phono x1

COAXIAL

2.0 V rms, 440 Ω, RCA/phono x2

ANALOG

120 V AC, 60 Hz (U.S. model)

230–240 V AC, 50 Hz (Australian model)

Power supply

13 W

Power consumption

Power consumption in Standby

mode

0.99 W (U.S. model)

0.99 W (Australian model)

General

6.4 kg (14.1 lbs.)

Weight

435 x 131 x 436 mm (17-1/8" x 5-3/16" x 17-3/16")

Dimensions (W x H x D)

Speciﬁcations and features subject to change without notice.

Integra Division of

ONKYO U.S.A. CORPORATION

18 park Way, Upper Saddle River, N.J. 07458, U.S.A.

Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com

Integra Division of

ONKYO CORPORATION

Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN

Tel: 072-831-8023 Fax: 072-831-8124

SN 29343663

I0402-1

Download from Www.Somanuals.com. All Manuals Search And Download.

Insignia DVD Player NS MVDS9 User Manual
Insignia TV DVD Combo NS LTDVD26 09CA User Manual
Intel Network Card 3945ABG User Manual
Interfire Audio Car Amplifier D17001 User Manual
JVC VCR HR J270EK User Manual
Kenmore Vacuum Cleaner 11631591 User Manual
Kenmore Washer 3950144 User Manual
Kenwood CD Player W8027 User Manual
Kenwood DVD Recorder DM SG7 User Manual
King Canada Sander 8356 User Manual