19" Combo DVD/LCD TV
Ensemble DVD/ TV ACL de 19 po | Combo DVD/TV con Pantalla LCD de 19"
NS-CL19C
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Important safeguards
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
This product has been designed and
manufactured to ensure personal safety.
Improper use can result in electric shock or fire
hazard. The safeguards incorporated in this
product will protect you if you observe the
following procedures in installing, using and
servicing. The internal components of this
product cannot be serviced or repaired by the
user.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
•
•
•
Read these instructions—Read and
understand all operating instructions before
operating the product.
Keep these instructions—These safety and
operating instructions must be kept in a safe
place for future reference.
Heed all warnings—All warnings on the
product and in these instructions must be
closely followed.
Caution:
This product employs a laser system. To ensure
correct use of this product, read this owner’s
manual carefully and retain it for future
reference. Should the DVD/VCR require
maintenance, contact qualified service
personnel.
Making adjustments to controls or performing
procedures other than those specified herein
may result in hazardous radiation exposure.
•
•
Follow instructions—All operating
instructions must be followed.
Accessories—Do not use attachments or
accessories not recommended by Insignia.
Use of improper accessories can result in
accidents.
Power source—This product must operate on
a power source specified on the device label.
If you are not sure of the type of power supply
used in your home, ask your dealer or local
power company.
AC power cord protection—The AC power
cords must be routed correctly to prevent
damage from people stepping on them or
from objects resting on them. Check the cord
connections at the power outlet and where
the cord attaches to the product.
Overloading—Do not overload AC power
outlets or extension cords. Overloading can
cause fire or electric shock.
Intrusions and spills—Never insert an object
into the product through vents or openings.
High voltage flows in the product, and
inserting an object can cause electric shock
and damage electrical components. For the
same reason, do not spill water or liquid on
the product.
Servicing—Do not attempt to service the
product yourself. Removing covers can
expose you to high voltage and other
dangerous conditions. Ask a qualified service
technician to perform servicing.
•
•
To prevent direct exposure to laser beam, do not
try to open the enclosure. DO NOT STARE INTO
BEAM.
Caution:
Your DVD/VCR should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
Caution:
•
•
Class 2M visible and invisible laser radiation
when open and interlocks defeated. Do not stare
into the beam or look at it directly with an optical
instrument.
Caution
Most recorder manufacturers recommend their
recorders be placed upon a dedicated circuit. That
is, a single outlet circuit which powers only that
recorder and has no additional outlets or branch
circuits.
Do not overload wall outlets. Overloaded wall
outlets, loose or damaged wall outlets, overloaded
extension cords, frayed power cords, or damaged
or cracked wire insulation are dangerous. Any of
these conditions could result in electric shock or
fire. Periodically examine the cord of your
•
•
Repair—If any of the following conditions
occur, unplug the AC power cord from the
AC power outlet, then request a qualified
service technician to perform repairs.
recorder, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
recorder, and have the cord replaced with an exact
replacement part by an authorized servicer.
Protect the power cord from physical or
•
•
•
•
When the AC power cord or plug is
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the
point where the cord exits the recorder.
damaged.
When liquid has spilled on the product or
when objects have fallen into the product.
When the product has been exposed to
rain or water.
To disconnect power from the power outlet, pull
out the power cord plug. When installing the
product, make sure that the plug is easily
accessible.
When the product does not operate
normally as described in these operating
instructions. Do not touch controls other
than those described in these
instructions. Incorrect adjustment of
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
controls not described in these
instructions can cause damage, which
often requires extensive adjustment work
by a qualified technician.
When the product has been dropped or
damaged.
When the product displays an abnormal
condition. Any noticeable abnormality in
the product indicates that the product
needs servicing.
•
•
Non-active pixels—The LCD panel contains
almost 3 million thin-film transistors, which
provide exceptionally sharp video quality.
Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green,
or red point. These non-active pixels do not
adversely affect the performance of your
product, and are not considered defects.
Heat sources—Do not install this product
near any heat sources such as radiators,
heat registers, stoves, amplifiers, or other
devices that produce heat.
•
•
•
Replacement parts—In case the product
needs replacement parts, make sure that the
service person uses replacement parts
specified by the manufacturer, or those with
the same characteristics and performance as
the original parts. Use of unauthorized parts
can result in fire, electric shock, and other
danger.
Safety checks—After completion of service
or repair work, ask the service technician to
perform safety checks to make sure that the
product is in proper operating condition.
Wall or ceiling mounting—When mounting
the product on a wall or ceiling, make sure to
install the product according to the method
recommended by the manufacturer of the
mounting or support device.
Speakers—Unplug the AC power cord from
the AC power outlet before installing the
speakers.
Features
Accessories
Make sure that the following accessories are
provided in the packaging:
•
•
•
•
•
Remote control
Batteries (two - AA)
User Guide
Front view
4
5
2
3
1
•
•
Cleaning—Unplug the AC power cord from
the AC power outlet before cleaning the
product. Clean only with a dry cloth. Do not
use liquid or aerosol cleaners.
INPUT
•
•
Water and moisture—Do not use this product
near wet or moist environments, such as near
a bathtub, washbasin, sink, laundry tub,
swimming pool, or wet basement. Do not
expose this product to dripping or splashing.
Do not place objects filled with liquid on this
product.
Shelves and carts—Do not place this product
on an unstable cart, stand, tripod, or table.
Unstable installation is likely to make the
product fall, resulting in serious injuries as
well as damage to the product. Use only the
cart, stand, tripod, bracket, or table specified
by Insignia, or sold with the product. When
you use a cart, exercise caution when moving
the cart and device to avoid injury from them
tipping over.
6
7
•
Ventilation—The vents and other openings in
the cabinet are designed for ventilation. Do
not cover or block them, because insufficient
ventilation can overheat and shorten the
product’s life span. Do not place the product
on a bed, sofa, rug, or other soft surfaces,
because they can block ventilation openings.
This product is not designed for built-in
installation. Do not place the product in an
enclosed place, such as a bookcase or rack,
unless you provide proper ventilation and the
manufacturer’s instructions are closely
followed.
Item
Description
1
INPUT button. Press to select the AV signal input
between TV, AV, S-VIDEO, PC, COMPONENT, and DVD.
2
3
MENU button. Press to open the main on screen menu.
VOL -/+ buttons. Press to decrease or increase the
volume.
4
5
6
CH -/+ buttons. Press to change the channel.
POWER button. Press to turn on and turn off the TV.
Remote sensor. Receives signals from the remote
control.
•
Fragile—The LCD panel used in this product
is made of glass, and can easily be broken
when the product is dropped or receives an
impact. If the panel becomes broken,
exercise extreme caution to prevent injury
from the broken glass.
7
Power Indicator LED. Turns green when the TV is turned
on and turns red when the TV is in standby mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Rear view - connectors
Rear view - DVD player
2
1
3
1
2
3
4
5
4
5
6
7
Item
Description
STOP button. Press to stop disc playback.
Item
Description
1
2
1
2
3
4
5
6
7
RF (75 ohm) antenna connector
Headphone jack
PLAY/PAUSE button. Press to begin playback,
press again to pause playback. press again to resume
playback.
PC audio input jack
3
4
5
OPEN/CLOSE button. Press to open the disc tray.
Composite video/audio input jacks
S-Video input jack
Press again to close the disc tray.
PREV button. Press to go to the previous chapter
or track. Press again to skip back by chapter or track.
Component (YPbPr) input jacks
VGA video input (PC) jack
NEXT button. Press to go to the next chapter or
track. Press again to skip forward by chapter or track.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Remote control
Item
Description
15
PLAY/ENTER button. Press to begin disc playback, or in
menu mode to confirm your selections.
20
16
1
/
/
/
cursor buttons: Press to navigate in on
screen menus.
2
3
4
21
22
23
24
17
18
ANGLE button. Press to change the DVD viewing angle.
AUDIO button. Press to change the DVD audio language/
options.
5
19
PROGRAM button. Press to enter DVD program mode.
In CD mode, pressing this button switches between
"Folder" and "Filelist" . Folder means play the tracks in
current folder, and Filelist means play all tracks on the
disk.
25
26
6
7
20
OPEN/CLOSE button. Press to open or close the
disc tray.
21
22
TV/DVD button. Press to switch between the current
inputs and DVD.
8
9
PICTURE button. Press to cycle through the picture
27
modes (Personal, Standard, Mild, and Fresh).
28
29
30
31
32
33
23
24
SLEEP button. Press to set the sleep timer.
10
11
12
13
14
15
CCD button. Press to select Close Captions modes while
in TV mode.
25
10+ button. If the track or channel number is over 10,
press this button once, then a button 1-9.
26
27
28
MUTE button. Press to mute the sound.
34
DISPLAY button. Press to show TV channel information.
16
17
18
19
35
36
37
38
SUBTITLE button. Press repeatedly until the subtitle
language you want is selected.
29
30
SETUP button. Press to open the DVD Setup menu.
NEXT button. Press to go to the next chapter or
track. Press again to skip forward by chapter or track.
31
PREV button. Press to go to the previous chapter
or track. Press again to skip back by chapter or track.
32
33
STOP button. Press to stop DVD and CD playback.
Item
Description
PAUSE/STEP button. Press to pause DVD playback.
Press again to step through a DVD one frame at a time.
1
2
POWER button. Press to turn the TV on and off.
34
SLOW button. Press to decrease the DVD playback
INPUT button. Press to select the AV signal input
speed.
between TV, AV, S-VIDEO, PC, COMPONENT, and DVD.
35
36
SEARCH button. Press to go to DVD search mode.
3
4
5
6
7
SCAN button. Press to scan through memorized TV
ZOOM button. Press to zoom the DVD display image in
channels.
on the picture.
MTS/SAP button. Press to select Stereo, Mono, or SAP
37
38
A-B button. Press to repeat a selected portion of a DVD.
REPEAT button. Press to go to DVD repeat mode.
mode.
Number buttons: Press to directly enter channel
numbers, DVD chapter numbers, and CD track numbers.
RECALL button. While in TV mode, press to return to the
previous channel.
CH +/- buttons. Press to skip to the previous or next
channel while in TV mode. In other modes (except DVD
mode), press to change to TV mode.
VOL+/- buttons. Press to change the volume.
8
MENU button. Press to open the TV menu. Press again
to exit.
9
EXIT button. Press to turn off the on screen display.
TITLE button. Press to display the current DVD title.
10
11
DISPLAY button. Press to show information about the
DVD playing.
12
13
14
REV button. Press to fast reverse a DVD.
FWD button. Press to fast forward a DVD.
DVD MENU button. Press to open the DVD root menu.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Setting up your TV
Note
Objects between the remote control and the
sensor may weaken the remote control’s IR signal.
Installing the remote control batteries
Range can be diminished by direct sunlight
shining on the TV’s IR sensor.
To install the batteries:
1 Open the battery compartment on the back of
Cautions
the remote control.
Do not expose the remote control to liquids, direct
sunlight, or shock.
The remote control may not work correctly if the
TV’s IR sensor is under direct sunlight or strong
lighting. In these cases, change the angle of the
lighting or the TV screen, or operate the remote
control closer to the IR sensor.
Connecting to video sources
Connecting to an antenna or cable/satellite
receiver
3
1
2 Insert the two AA batteries (provided) into the
battery compartment. Make sure that the (+)
and (-) symbols on the batteries match the
diagram inside the compartment.
4
Using the remote control
2
To use the remote control:
To connect an external antenna or cable/
satellite receiver:
1 Connect the antenna cable (1) from an
antenna (2) or cable/satellite receiver (3) to
the antenna input jack (4) on the TV.
•
Point it directly at the TV, within a 30° angle of
the IR sensor on the front of the TV, and
within 20 feet.
2 Press the INPUT button to set the TV’s signal
input to TV.
Notes
•
To improve picture quality in a poor signal area,
you can purchase and install a signal amplifier.
To split the signal from an antenna, you will
need a 2-way signal splitter.
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Connecting to a VCR or other AV source
Connecting to a cable box
2
2
1
1
To connect your TV to a VCR or other AV
source:
1 Turn off the TV and the VCR (or other
To connect your TV to a cable box with an RF
cable (1):
1 Turn off the TV and the cable box.
2 Connect a 75 ohm RF cable from the cable
box to the ANT IN jack on the back of your
TV.
source).
2 Connect an RCA video cable to the VCR (1),
then to the VIDEO IN jack on the back of the
TV (2).
- OR -
Connect an S-Video cable to the VCR, then
to the S-VIDEO jack on the back of the TV.
3 Set the cable box output switch to channel 3
or 4, then tune your TV to the same channel.
3 Connect RCA audio cables to the VCR’s
audio output jacks, then to the AUDIO L and
R jacks on the back of the TV.
4 Turn on the TV and the cable box.
5 Change channels at the cable box or with the
cable box remote.
4 Turn on the TV and the VCR.
To connect your TV to a cable box with a AV
cables (2):
1 Turn off the TV and the cable box.
2 Connect RCA video and audio cables from
the cable box to the VIDEO and AUDIO IN
jacks on the back of your TV.
5 Set the VCR output switch to channel 3 or 4,
then tune your TV to the same channel.
6 Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
•
•
•
Yellow - Video
White - Audio left
Red - Audio right
3 Turn on the TV and the cable box.
4 Press the INPUT button to set the TV’s signal
input to AV or S-VIDEO.
5 Change channels at the cable box or with the
cable box remote.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Connecting to a computer
Changing the video source
Your TV supports multiple video sources.
1
To select the video source:
2
•
Press the INPUT button to select from the
following input modes:
•
•
•
•
•
•
TV
AV
S-VIDEO
PC
COMPONENT
DVD
3
The name of the input source appears on the
screen when it is selected.
Changing channels
To change channels:
•
Press CH+ or CH-.
To connect a computer video source to the
VGA jacks:
To enter a channel number directly:
•
Press the number buttons on the remote
control.
1 Connect a VGA cable from the computer to
the VGA IN port on the TV.
2 Connect a male-to-male audio cable from the
computer to the PC AUDIO IN port on the TV.
3 Turn on the TV, then turn on the PC.
To switch between two channels:
1 Press RECALL to change from the currently
tuned channel to the previous channel.
4 Press the INPUT button to set the TV’s signal
input to PC.
2 Press RECALL again to change back to the
originally tuned channel.
See “ADJUST” on page 16 to adjust the
picture.
To scan through memorized channels:
1 Press SCAN on the remote control. The
picture pauses for about two seconds on
each memorized channel.
Using your TV
2 To stop the Scan function, press SCAN
again.
Turning the power on and off
Changing the picture mode
To turn the power on and off:
1 Press the POWER button on the front panel
of the TV or on the remote control. The
POWER indicator turns green.
2 To turn off the TV, press the POWER button
again. The screen image disappears and the
POWER indicator turns red.
To change the picture mode:
•
Press PICTURE on the remote control to
cycle through the following modes:
•
•
•
•
PERSONAL
STANDARD
MILD
FRESH
Note
A small amount of electric power is consumed
even when the power is turned off.
Changing the volume
You can change the volume using the TV’s front
panel or the remote control.
To change the volume:
1 Press VOL+ or VOL- .
2 Press MUTE on the remote control to mute
the sound, and press it again (or the VOL+ or
VOL- ) to restore the sound.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Programming channels into memory
Adding a channel label
To automatically program channels into
memory:
1 Press MENU on the TV or remote control,
then press VOL+/VOL- to display the
TUNING menu.
To add a label to a channel:
1 Press MENU on the TV or remote control,
then press VOL+/VOL- to display the
TUNING menu.
73. 12MHZ
73. 12MHZ
2 Press CH+/CH- to enter the TUNING menu
and to highlight CHANNEL LABEL, then
press VOL+ to enter the menu.
3 Press VOL+/VOL- to select the position and
CH+/CH- to select the letters or symbols to
set.
2 Press CH+/CH- to enter the TUNING menu
and to highlight AUTO PROGRAM, then
press VOL+ to enter the AUTO PROGRAM
submenu.
4 Press MENU to confirm.
Setting the sleep timer
The sleep timer lets you select the amount of
time before your TV turns off automatically.
3 Press VOL+ highlight YES, then press MENU
to confirm your selection.
To set the sleep timer:
4 The TV searches and memorizes all
channels on the selected antenna input
available in your area.
•
Press the SLEEP button on the remote
control repeatedly until the time duration you
want is shown on the screen. Options
include:
Note
•
•
•
•
•
•
•
•
•
•
•
SLEEP 240 MIN
SLEEP 180 MIN
SLEEP 120 MIN
SLEEP 90 MIN
SLEEP 60 MIN
SLEEP 45 MIN
SLEEP 30 MIN
SLEEP 15 MIN
SLEEP 10 MIN
SLEEP 5 MIN
SLEEP 0 MIN
If your TV is connected to cable, select CATV in
the ANTENNA submenu.
5 To stop the auto search, press MENU.
Displaying status information
To display status information:
•
Press the DISPLAY button. Your TV displays
status information, such as the channel
number or signal source.
Viewing closed captions
To view closed captions:
•
Press the CCD button to toggle the closed
captions on or off.
Setting parental controls
Your TV has a V-chip that lets you control the
type of programs your children can watch.
Parental controls include two ratings: MPAA
(based on age) and TV Parental Guidelines
(based on content and age). A TV program may
have an MPAA or TV Parental Guidelines rating,
so you should set controls for both ratings.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Setting the Parental Control level
Before you can select ratings, you need to set up
a parental controls password.
To set the Parental Control level:
To set up a password:
1 Press MENU on the TV or remote control,
then press VOL+/VOL- to display the
FUNCTION menu.
1 Press MENU on the TV or remote control,
then press VOL+/VOL- to display the
FUNCTION menu.
2 Press CH+/CH- to enter the FUNCTION
menu and to highlight PARENTAL, then
press VOL+ to enter the PARENTAL
submenu. The PASSWORD box opens.
2 Press CH+/CH- to enter the FUNCTION
menu and to highlight PARENTAL, then
press VOL+ to enter the PARENTAL
submenu. The PASSWORD box opens.
3 Press the number buttons to enter your
password. The PARENTAL menu opens.
3 Press the number buttons to enter 0000. The
PARENTAL menu opens.
4 Press CH+/CH- to select the option you want
to change, then press VOL+/VOL- to change
the option.
4 Press CH+/CH- to select CHANGE
PASSWORD, then press VOL+ to enter the
CHANGE PASSWORD submenu.
5 Press MENU or EXIT button to close the
menu.
5 Press the number buttons to enter a
password.
American MPAA ratings
6 Press the number buttons to enter the new
password again, to confirm.
Rating
Description
Caution
NONE or NR Not rated.
Write down your password and save it for future
use.
G
General audiences.
PG
Parental guidance suggested. Some
material may not be suitable for
children.
Note
If you forget your password, enter 9443 for the old
password, then enter a new password. This
password always remains valid for resetting your
password.
PG 13
R
Parental guidance strongly suggested.
Some material may not be suitable for
children under 13 years of age.
Restricted. Not suitable for children
under 17 years of age unless
accompanied by a parent or guardian.
NC 17
X
Not suitable for children under 17
years of age.
Adults only.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
5 Press the
and
buttons to highlight
Rating
Description
menu items, and press
PLAY/PAUSE on
the player, or PLAY/ENTER on the remote, to
select.
OFF
No controls
Canadian MPAA Ratings
6 During playback:
•
Press
PLAY/PAUSE on the player, or
Rating
Description
PAUSE/STEP on the remote, to pause
E
Exempt - includes news, sports,
documentaries, talk shows.
playback. Press
PLAY/PAUSE on the
player, or PLAY/ENTER on the remote, to
resume playback.
C*
Children (English)
•
•
•
Press
to fast review, and press
G**
8+**
C8+*
G*
Children (French)
to fast forward. Each time you press the
fast reverse or fast forward button, the
speed changes.
Children 8 years and above (French)
Children 8 years and above (English)
General audience (English)
Parental guidance suggested.
13 years old and above (French)
14 years old and above (English)
16 years old and above (French)
Adult programming
Press
and press
Press repeatedly to continue skipping
back or forward.
to skip to the previous chapter,
to skip to the next chapter.
PG
13+**
14+*
16+**
18+
To advance a movie frame by frame,
press
PAUSE/STEP, then press
PAUSE/STEPagain. Each time you
press
PAUSE/STEP, the movie
advances by one frame.
OFF
No controls
•
•
To play in slow motion, press SLOW.
* Can. English only
** Can. French only
To search for a specific scene, press
SEARCH to open the SEARCH menu,
press the number buttons to indicate the
scene you want.
TV Parental Guidelines ratings
•
To completely stop DVD playback, press
Rating
Description
STOP twice.
NONE or NR Not rated.
7 Press
OPEN/CLOSE to remove the DVD.
TV-Y
All children.
Accessing the root DVD menu
TV-Y7
TV-G
Children over seven years of age.
General audiences.
To access the root DVD menu:
1 Press DVD MENU on the remote control.
2 Select and change the options you want.
TV-PG
TV-14
TV-MA
Parental guidance suggested.
Parents strongly cautioned.
Mature audiences only.
Note
This function is not available on DVDs with
multi-layer menus.
Some of the age-based TV Parental Guidelines
ratings also have PG Content-based ratings.
Displaying DVD information
To display DVD information:
Rating
FANTASY VIOLENCE.
DIALOGUE
LANGUAGE.
SEX
•
Press DISPLAY on the remote control
repeatedly to cycle through Title Elapsed,
Title Remain, Chapter Elapsed, Chapter
Remain, and Display Off.
Selecting the subtitle language
VIOLENCE.
If the DVD was created with subtitles, you can
change the subtitle language.
Using the DVD player
To change the subtitle language:
1 Press SUBTITLE repeatedly until the desired
Playing a DVD
language is selected.
To play a DVD:
1 Press POWER to turn on the TV.
2 Press TV/DVD to select DVD.
3 Press
OPEN/CLOSE to open the disc
tray.
4 Place the DVD in the disc tray, then press
OPEN/CLOSE to close the disc tray. The
DVD player reads the DVD and displays the
opening menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
2 To remove subtitles, press SUBTITLE until
To program playback:
“Off” appears on the screen.
1 Press PROGRAM while a disc is playing to
enter Program mode.
Note
2 Press the number buttons on the remote
control to enter the title and chapter you want
to play first. The title and chapter number you
entered appears in the box.
Changing the subtitle language using this method
only affects the DVD currently being played. When
the DVD is removed or the player is turned off, the
subtitle language reverts to the language setting
specified through the DVD player’s main menu.
3 The cursor jumps to the next spot in the
program list section. Make sure the box is
highlighted and enter your next title and
chapter.
Tip
The subtitle language can also be changed
through the DVD player’s main menu or the DVD’s
own subtitle settings.
4 Continue adding titles and chapters until your
Using repeat play
program is finished.
You can repeat chapters, titles, or the entire DVD
using Repeat Play.
5 Highlight Start, then press PLAY/ENTER to
start playing the program.
To repeat a segment:
6 To stop the programmed playback, press
STOP twice during program play.
1 While the DVD is playing, press REPEAT to
scroll through the options:
Changing the audio options
•
•
•
Chapter (repeats the current chapter)
Title (repeats the current title)
All (repeats all content on the DVD)
If the DVD was created with multiple language
tracks (recorded in different languages), or
multiple sound options, you can temporarily
change the DVD player’s Audio settings.
2 To stop repeat playback, do one of the
following:
To change the audio options:
•
Press REPEAT until “ALL” disappears
from the screen.
1 Press AUDIO. The OSD shows the current
audio setting.
•
•
Press STOP twice.
Eject the DVD.
2 If multiple audio options are available, press
AUDIO again to select the next audio track.
To repeat selected parts of a DVD:
1 Set a starting point by pressing A-B.
Note
This feature only works if the DVD was created
with multiple audio tracks. When you choose an
audio language, you only temporarily override the
audio language setting in the DVD player’s main
menu.
2 Set an end point by pressing A-B again.
3 The player plays from point A to point B.
4 To stop the repeat function, press A-B again.
Allow a three second interval between selections.
Changing the camera angle
Tip
The audio language can also be changed through
the DVD player’s main menu or the DVD’s own
audio settings.
Some DVDs contain multiple angles of a scene
or sequence. If the DVD has only one angle, this
feature does not work.
Playing a CD
To change the camera angle:
1 Press ANGLE repeatedly until the desired
To play a CD:
1 Press POWER to turn on the player.
2 Press TV/DVD to select DVD.
camera angle is selected.
2 To resume normal playback, press ANGLE
until the original angle is selected.
3 Press
OPEN/CLOSE to open the disc
Magnifying the image
tray.
You can enlarge or reduce the display image
while the DVD is playing or while it is paused.
4 Place the CD in the disc tray, then press
OPEN/CLOSE to close the disc tray. The
DVD player begins playing the CD.
To magnify the image:
5 During playback:
1 While a DVD is playing, press ZOOM. The
image is magnified 2×. Continue pressing
ZOOM to magnify the image 3×, then 4×.
•
Press
PLAY/PAUSE on the player, or
PAUSE/STEP on the remote, to pause
•
While the image is magnified, press the
and buttons to move the
picture on the screen.
playback. Press
PLAY/PAUSE on the
player, or PLAY/ENTER on the remote, to
resume playback.
2 To return to normal picture size, press ZOOM
•
•
Press
to fast review, and press
until the picture returns to normal.
to fast forward.
Press
and press
to skip to the previous track,
Program play
to skip to the next track.
To play chapters and titles in a custom order, you
can create a playback program.
Press repeatedly to continue skipping
back or forward.
•
To completely stop CD playback, press
STOP.
6 Press
OPEN/CLOSE to remove the CD.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Using repeat play
•
To completely stop disc playback, press
STOP twice.
You can repeat tracks or the entire CD using
repeat play.
7 Press
OPEN/CLOSE to remove the disc.
To use repeat play:
1 While the CD is playing, press REPEAT to
Customizing TV settings
scroll through the options:
•
•
•
•
Single - (play current track)
Opening and navigating the on-screen
menus
Repeat One - (repeat current track)
Repeat Folder - (repeat current folder)
Folder - (play current folder)
Using the on-screen menu
2 To stop repeat playback, do one of the
Your TV has an on-screen menu that lets you
adjust TV settings, such as video and audio
settings.
following:
•
Press REPEAT until “Folder” disappears
from the screen.
To use the on-screen menu:
•
•
Press
STOP twice.
1 Press MENU on the TV or remote control,
then press VOL+/VOL- to display the menu
you want.
Eject the CD.
Changing the audio mode
2 Press CH+/CH- to enter the menu and to
highlight option you want, then press VOL+/
VOL- to change the setting.
3 If a submenu is available, press VOL+ to
enter the submenu, the press VOL+/VOL- to
change the setting.
To change the audio output of a
multi-channel CD:
•
During CD playback, press AUDIO. The
setting changes each time you press the
button:
•
•
•
•
Mono Left
Mono Right
Mix-Mono
Stereo
4 Press MENU or EXIT to close the on-screen
menu.
On-screen menus
Selecting a track for playback
On-screen
Options
menu
To select a specific track for playback:
•
After you load a CD into the player, and after
the player finishes reading the disc, press the
number buttons to enter the track number,
then press PLAY/ENTER to play the track.
TUNING
CHANNEL–The current channel selected. Press
VOL+/VOL- to change the setting.
CHANNEL LABEL–Lets you add a label to a
channel.
CHANNEL LOCK–Lets you lock a channel.
Tip
SKIP–Setting this to ON causes the current
channel (see CHANNEL above) to be skipped
on the channel list. You can select a skipped
channel by inputting the channel number using
the number keys.
If the track number is under 10, press buttons 1-9
to select it. If the track number is 10, press 10+
once, then button 0 to select it. If the track number
is over 10, press 10+ once, then a button 1-9.
AFC–Auto frequency control. Select ON to
Playing a JPEG disc
automatically improve image quality.
FINE TUNE–Use to manually adjust tuning to
improve image and sound quality. Do not use
unless reception is poor.
To play a JPEG disc:
1 Press POWER to turn on the player.
2 Press TV/DVD to select DVD.
ANTENNA–Selects the TV antenna source (AIR
or CATV).
3 Press
OPEN/CLOSE to open the disc
AUTO PROGRAM–Automatically sets up a list
of the channels available in your area for the
antenna type selected. For more information,
see “Programming channels into memory” on
page 11.
tray.
4 Place the disc in the disc tray, then press
OPEN/CLOSE to close the disc tray. The
disc navigation menu opens.
5 Press
to select the file you want, then
press PLAY/ENTER to confirm. The
slideshow begins.
6 During playback:
•
Press
PAUSE/STEP on the remote, to
stop the picture and press PLAY/ENTER
resume normal play.
•
Press
PREV to skip to the previous
picture, and press
NEXT to skip to
the next picture. Press repeatedly to
continue skipping back or forward.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
On-screen
menu
On-screen
menu
Options
Options
PICTURE
CONTRAST–Increases the picture level to
adjust the white areas of the picture. Decreases
the picture level to adjust the black areas of the
picture. (0 ~ 100)
BRIGHTNESS–Increases the brightness to add
more light to dark areas of the picture.
Decreases the brightness to add more dark to
light areas of the picture. (0 ~ 100)
ADJUST
(Only available in
PC mode)
AUTO CONFIG–Automatically adjusts the
picture frequency and phase parameters for
use with a PC.
(Options may vary
in different
modes.)
PHASE–Adjusts the phase of the PC image to
remove horizontal distortion and sharpen
characters.
CLOCK–Adjusts the TFT-LCD to match the PC
input source clock frequency.
SHARPNESS–Increases the sharpness for a
cleaner and clearer image. Decreases the
sharpness for a smoother picture. (0-4)
H POSITION–Adjusts the horizontal position of
the picture.
V POSITION–Adjusts the vertical position of
COLOR TEMP–Adjusts the overall color of the
the picture.
picture. (NEUTRAL, WARM, COOL)
COLOR–Adjusts the color saturation of the
picture.
Customizing DVD player
settings
H POSITION–Adjusts the horizontal position of
the picture. Component mode only.
V POSITION–Adjusts the vertical position of
the picture. Component mode only.
Using the setup menu
NOISE REDUCTION–Adjusts the quality of the
picture (OFF, LOW. MID, or HIGH). TV/AV/
S-VIDEO/DVD modes only.
Use your remote control to navigate the setup
menu, where you can configure DVD player
settings.
HUE–Adjusts the tone of the picture.
SOUND
VOLUME–Adjusts the volume of the TV.
To open and navigate the Setup menu:
BALANCE–Adjusts the right and left speaker
volumes.
1 Press SETUP on the remote control. The
General Setup Page opens.
BASS–Adjusts the low sounds (bass). Available
in Personal mode only.
TREBLE–Adjusts the high sounds (treble).
Available in Personal mode only.
AUDIO MODE–Selects an audio equalization
mode for the TV sound (PERSONAL, VOICE,
MUSIC, or THEATRE)
AVL–Automatic Volume Limit Control. Reduces
the effect of high volume by limiting volume
peaks across all channels.
4:3/Ps
4:3/Lb
16:9
FUNCTION
INPUT SOURCE–Shows the currently selected
TV signal source (TV, AV, S-VIDEO, PC,
Hdcd
Last Memory On
Off
COMPONENT, or DVD).
LANGUAGE–Selects the language for the
on-screen display (OSD).
2 If no disc is playing, press SETUP again. The
CC MODE–Selects the Closed Captioning
mode. Options include:
Preference Page opens.
•
OFF–Turns off Closed Captioning
ON WHEN MUTE–Turns on Closed
Captioning when the sound is muted.
ON–Turns on Closed Captioning.
•
..Preference Page..
•
CC CAPTION–Selects the Closed Caption type
for viewing.
1 Kid Saf
•
CC1–Turns on Closed Captioning in the
primary language of your area
CC2-CC4–Turns on other modes of
video-related broadcase information in
a secondary language.
Parental
2 G
Password
Default
3 Pg
•
4 Pg 13
5 Pgr
6 R
•
•
TT1–Turns on the program guide
provided by broadcasters.
7 Nc17
8 Adult
TT2-TT4–Turns on other types of
information provided by broadcasters.
PARENTAL–Accesses V-chip controls. For
more information, see “Setting parental
controls” on page 11.
3 Press
to highlight a selection or
submenu, then press
available.
to show the options
BLUE SCREEN–Sets the option to turn on the
blue screen if there is no signal for three
seconds.
4 Press
to select the option/setting you
want, then press PLAY/ENTER to confirm.
5 To exit the Setup menu, press SETUP.
ASPECT RATIO–Selects the aspect ratio of the
picture. Choices include:
• FULL SCREEN
• 4:3
• 16:9
• ZOOM
RESET–Restores the settings to factory default.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Changing DVD settings
Troubleshooting
Please check the following items before asking
for repair service:
On-screen
Options
menu
GENERAL SETUP TV DISPLAY–Sets the aspect ratio of the TV
Problem
Solution
display.
No picture or
sound.
Check all cable connections.
Make sure that the TV is plugged in and turned
on.
Make sure that electricity is available at the AC
power outlet.
•
•
•
4:3/PS (Pan and Scan - may be used
with external TVs) Widescreen images
are shown on the screen, but with some
parts automatically cut off the ends.
4:3/LB (Letter Box - use with internal
TV) Widescreen images are shown on
the screen with black bars on the top
and bottom of the screen.
Picture is OK, but
no sound.
Check the volume level and mute settings.
Switch to another channel to determine if the
station is the problem.
16:9 (may be used with external TVs)
Widescreen images fill the entire
screen.
No picture
Make sure that the TV is working properly.
Press the INPUT button to select TV input.
Make sure the color system is set correctly.
ANGLE MARK–Lets you turn the Angle option
On or Off. If you set this to On, you can use the
ANGLE button on the remote to select an
alternate viewing angle on the DVD.
Sound is OK, but no Check the color control and adjust it.
color.
Check the program’s color features, because it
may be a black and white movie.
OSD Lang.–Lets you select the language for
the On Screen Display (OSD).
CAPTION–Lets you turn the caption On or Off.
The picture has
Make sure that the antenna is installed
overlapped images. correctly. If not, adjust the antenna toward the
broadcasting station.
SCREEN SAVER–Lets you turn on the screen
saver, which displays when the DVD player is
idle for more than three minutes.
Hdcd–Lets you set Hdcd to "OFF","1X","2X" to
switch the CD play mode between "Normal
CD","HDCD with 44.1K","HDCD with 88.2K". You
can play normal CDs when "HDCD" is set to off.
You can play 44.1K CDs when HDCD is set to
1X, and 88.2K CDs when HDCD is set to 2X to
enhance the audio quality.
Last Memory–Lets you turn the last memory
option On or Off. When set to On, the DVD
player remembers the chapter that you were
viewing when you turn the DVD player off and
starts the DVD at that chapter when you turn
the DVD player back on.
Picture has “snow.” Check the antenna and its connection. If there
are problems, correct them. If all connections
are tight, the problem may be with a faulty
antenna or cable.
Check whether car traffic or neon signs
disturb the image.
Stripes on picture. Check for interference from other electronic
devices, such as radios and televisions, and
keep magnetic or electronic devices away
from the TV.
Bad stereo or SAP Long distance from the station or interfering
sound.
radio waves can result in bad sound reception.
If so, change the mode to Mono.
PREFERENCE
(only available
when no disc is in
the player)
TV Type–Lets you select the TV output.
Remote control
does not work.
Point the remote control at the TV’s IR sensor.
Change the batteries in the remote control.
Remove any obstacles between the TV’s IR
sensor and the remote control.
Choices include:
•
NTSC (default)–Standard for America.
AUTO–Automatically changes based on
the DVD in the player.
•
• PAL–Standard for Europe.
PARENTAL–Lets you set Parental Controls for
watching DVDs. Initial password is 1234
Options include:
Image is not clear. Adjust the NOISE REDUCTION function.
Image is not
centered.
Adjust the Horizontal or Vertical control.
Bad sound quality
Make sure that the audio output mode is set
correctly.
Make sure that the audio connection between
the unit and amplifier (if used) is secure.
• Off
• 1 Kid Safe
• 2 G
• 3 Pg
• 4 Pg 13
Disc cannot be
played
Make sure the disc is inserted with the label
facing forward.
Clean the disc.
Moisture has condensed in the player.
Remove the disc and leave the player on for
about an hour.
• 5 Pgr
• 6 R
• 7 Nc 17
• 8 Adult
PASSWORD CHANGE–Lets you change the
password used to set or change Parental
Controls. The initial password is 1234. Use the
number buttons to enter, then confirm the new
password.
The player doesn’t Disconnect the power plug for ten seconds,
operate normally
then reconnect it.
If the problem persists, contact Insignia or
your dealer for help.
Note: If you forget your password, enter 1369.
DEFAULT–Resets all settings (except Parental
Controls and the password) to factory default.
Press ENTER to confirm.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Cleaning discs
Maintaining
Handling and cleaning the TV/DVD
Fingerprints and dust on the disc can cause
poor picture quality and sound distortion. Before
playing, clean the disc with a clean cloth. Wipe
the disc from the center out.
Shipping the DVD/VCR
Please save the original shipping carton and
packing materials. If you need to ship the TV/
DVD, for maximum protection, re-pack the it as it
was originally packed at the factory.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the TV/DVD.
•
Do not leave rubber or plastic products in contact
with the TV/DVD for a long period of time because
they can leave marks on the surface.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.
Cleaning the case
•
To clean the player, use a soft, dry cloth. If
the surfaces are extremely dirty, use a soft
cloth lightly moistened with a mild detergent
solution.
Note
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two or three hours without operating it.
If you use this product in such a situation, it may
damage tapes, discs, or internal parts.
•
Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage
the surface of the player.
Maintaining the TV/DVD
Specifications
This TV/DVD is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality could be
diminished.
Model
NS-CL19C
NTSC
Depending on the operating environment,
regular inspection and maintenance are
recommended after every 1,000 hours of use.
For details, please contact your nearest
authorized service center.
Picture and sound
system
1.5 W + 1.5 W
Audio output
External input
AV, PC, S-Video, PC audio, YPbPr, Antenna
Care and handling of discs
Handling discs
Power
requirements
~ 120 V 60 Hz
80 W
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
Power consumption
Temperature
Working: 41° F ~ 95° F (+5° C ~ +35° C)
Storage: 5° F ~ 113° F (-15° C ~ +45° C)
Remote control
Batteries (two - AA)
User Guide
Accessories
Playable discs
The following discs, and only the following discs,
Storing discs
can be played in the DVD player.
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.
Discs
Label
Contents
Dimension
DVD
Audio + Video
12 cm
(moving picture)
CD
Audio
12 cm
HDCD
Audio
12 cm
12 cm
MPEG-4
Audio + Video
(moving picture)
JPEG
Video (picture)
Video (picture)
12 cm
12 cm
KODAK CD
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
Discs
Label
Contents
Dimension
CD-R
Audio or Video
(moving picture)
12 cm
CD-RW
CD+G
Audio or Video
(moving picture)
12 cm
12 cm
Audio (picture)
Legal Notices
Macrovision statement
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Copyright
© 2007 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or
registered trademarks of their respective holders.
Specifications and features are subject to change
without notice or obligation.
For service and support call (877) 467-4289.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia NS-CL19C 19" Combo DVD/LCD TV
•
Products where the factory applied serial number
has been altered or removed
1 Year Limited Warranty
Insignia Products (“Insignia”) warrants to you, the
original purchaser of this new 19” Combo DVD/LCD TV
(“Product”), that the Product shall be free of defects in
the original manufacture of the material or workmanship
for a period of one (1) year from the date of your
purchase of the Product (“Warranty Period”). This
Product must be purchased from an authorized dealer of
Insignia brand products and packaged with this warranty
statement. This warranty does not cover refurbished
Product. If you notify Insignia during the Warranty Period
of a defect covered by this warranty that requires
service, terms of this warranty apply.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS YOUR EXCLUSIVE REMEDY.
INSIGNIA SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
THE BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF
YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD
SET FORTH ABOVE AND NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES,
PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
HOW LONG DOES THE COVERAGE LAST?
The Warranty Period lasts for 1 year (365 days) from the
date you purchased the Product. The purchase date is
printed on the receipt you received with the Product.
WHAT DOES THIS WARRANTY COVER?
During the Warranty Period, if the original manufacture of
the material or workmanship of the Product is
determined to be defective by an authorized Insignia
repair center or store personnel, Insignia will (at its sole
option): (1) repair the Product with new or rebuilt parts;
or (2) replace the Product at no charge with new or
rebuilt comparable products or parts. Products and parts
replaced under this warranty become the property of
Insignia and are not returned to you. If service of
Products or parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This
warranty lasts as long as you own your Insignia Product
during the Warranty Period. Warranty coverage
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
INSIGNIA™ is a trademark of Best Buy Enterprise
Services, Inc.
Distributed by Best Buy Purchasing, LLC.
Insignia, 7601 Penn Avenue South, Richfield, Minnesota,
U.S.A.
terminates if you sell or otherwise transfer the Product.
HOW TO OBTAIN WARRANTY SERVICE?
If you purchased the Product at a retail store location,
take your original receipt and the Product to the store
you purchased it from. Make sure that you place the
Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging. If you purchased the Product from an online
web site, mail your original receipt and the Product to the
address listed on the web site. Make sure that you put
the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a
screen 25 inches or larger, call 1-888-BESTBUY. Call
agents will diagnose and correct the issue over the
phone or will have an Insignia-approved repair person
dispatched to your home.
WHERE IS THE WARRANTY VALID?
This warranty is valid only to the original purchaser of the
product in the United States and Canada.
WHAT DOES THE WARRANTY NOT COVER?
This warranty does not cover:
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning
strikes
•
•
•
•
•
•
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including
the antenna
•
Plasma display panel damaged by static
(non-moving) images applied for lengthy periods
(burn-in).
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2007
2007
2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|