User Guide
Rocketboost™ Wireless Subwoofer
NS-RSW211
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Contents
Important safety instructions ..................................... 4
Features............................................................................... 6
Connecting your subwoofer ....................................... 7
Maintaining your system............................................14
Troubleshooting ............................................................14
Specifications..................................................................15
Legal notices ...................................................................16
One-year limited warranty.........................................19
Introduction
Congratulations on your purchase of the Rocketboost Wireless
Subwoofer. This product can be used as a standard wired subwoofer or
you can upgrade to wireless when the subwoofer is used with other
Rocketboost products (sold separately.)
Rocketboost wireless technology provides uncompressed digital quality
sound and is interference free, so the excellent audio quality from the
subwoofer will be the same in wired or wireless mode.
This User Guide explains how to correctly install, operate, and get the best
performance from your Rocketboost Wireless Subwoofer. Read this guide
carefully before installing your subwoofer, and then keep it handy for
quick reference.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Package contents
The box should contain the following:
User Guide
Quick Setup Guide
NS-RSW211 Wireless Subwoofer
Step
1
Connect the power cord to
a
120
V
power outlet.
To join your wireless subwoofer to your Rocketboost network:
Congratulations on your purchase of
a
1
2
3
Set the HUB switch on the wireless sender/receiver toDISABLE.
high-quality Insignia product. Your Wireless
Subwoofer represents the state of the art in
powered subwoofers and is designed for
reliable and trouble-free performance. Use this
guide for initial setup of your Wireless
•
•
The power indicators turn green when theHUB switch is set to ENABLE.
The power indicators turn blue when theHUB switch is set to DISABLE.
Press and hold the POWER button on your Rocketboost Hub device for more than three seconds to put it
into joining mode. The power indicator starts blinking rapidly and the unit stays in joining mode for 30
seconds.
Press and hold the button on the wireless sender/receiver for more than three seconds so the Hub
device and wireless sender/receiver enter joining mode.
Subwoofer. See your User Guide for more
information on using your Wireless Subwoofer.
•
•
The power indicators light steadily if the joining was successful.
The power indicators blink slowly if the joining was not successful.
Package contents
•
•
•
NS-RSW211 Wireless Subwoofer
User Guide
Quick Setup Guide
4
5
Press and hold the POWER button on your Rocketboost Hub device for more than three seconds to put it
into joining mode. The power indicator starts blinking rapidly and the unit stays in joining mode for 30
seconds.
Press and hold the button on the wireless subwoofer for more than three seconds so the Hub device
and wireless subwoofer enter joining mode.
Step 2 Turn on the power switch.
•
•
The power indicators light steadily if the joining was successful.
The power indicators blink slowly if the joining was not successful.
•
•
•
•
•
•
Rated Impedance: ohms
Rated frequency range: 50Hz-20KHz
Rated power input: 75W
3
Max power input: 100W
Your wireless subwoofer must now be joined or wirelessly connected to wireless
sender/receiver, so that audio can be sent from the wireless sender/receiver to the wireless
subwoofer.
a
Dimensions: 13.7 (H)
×
13.6 (W)
×
13.6 (D) inches (34.7 (H)
×
34.5 (W) × 34.5 (D) cm)
Weight: 10.4 lbs. (4.7 kg)
NOTE
One-year limited warranty
Contact Insignia:
For customer service, call 1-877-467-4289
'
2011
BBY Solutions, Inc. All rights reserved. All rights reserved. INSIGNIA is
a
trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are trademarks of their respective owners.
ENGLISH 11-0309
Rocketboost™ Wireless Subwoofer
NS-RSW211
Quick Setup Guide
User Guide
Wireless Subwoofer
Important safety instructions
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK:
DO NOT REMOVE SCREWS, COVERS OR THE CABINET.
NO USER SERVICING PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Unplug this apparatus during lightning storms or when unused for long
periods of time.
13 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
14 To reduce the risk of fire or electric shock, do not expose this device to
rain, moisture, dripping, or splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
15 The wall plug is the disconnecting device. The plug must remain readily
operable.
Warning
• Read the Rating Label on the back of the unit for power
input and other safety information.
• To avoid risk of electric shock and fire, and to prevent
damage, locate the apparatus for adequate ventilation.
Caution
• Install the system in a place which is level, dry, and
neither too hot nor too cold. The appropriate
temperature is between 41° F and 104° F (5° C and 40° C).
• Install the system in a location with adequate ventilation
to prevent internal heat from building up inside the unit.
What is Rocketboost?
•
•
Rocketboost is expandable wireless digital audio.
Products with Rocketboost technology let you easily expand your
listening experience throughout your home.
•
•
Rocketboost does not interfere with other wireless products in your
home.
Rocketboost is uncompressed digital audio compatible with all audio
formats such as Dolby TrueHD and DTS-HD Master Audio used with
Blu-ray.
When you see the Rocketboost logo on any product, it has
been designed to work with other Rocketboost products,
no matter who manufactures them.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Features
Use as a standard wired subwoofer or upgrade to wireless when used with
other Rocketboost products (sold separately).
•
•
•
•
Amplifier Power: 75W
6.5" Woofer
50 Hz to 200 Hz frequency range
Up to 150' wireless range
Wireless Subwoofer (back panel)
1
2
3
4
5
6
7
8
9
#
1
Feature
Description
Power indicator
Lights red when the subwoofer is in Standby mode. The subwoofer automatically enters
Standby mode if it is no longer receiving an audio signal.
When the INPUT SELECT switch is in Aux mode, this indicator will light blue when the
subwoofer is receiving audio signals from the AUX INPUT.
When the INPUT SELECT switch is in Wireless mode, this indicator will light blue when the
subwoofer is joined in a Rocketboost network. If the subwoofer is not in a network the
indicator blinks slowly. When the subwoofer is put in joining mode, the indicator blinks
rapidly. See "Connecting your subwoofer for wireless mode" on page 11 for more information.
RCV Status indicator This indicator is only used when the INPUT SELECT switch is in Wireless mode.
The indicator is blue when receiving audio from a Rocketboost wireless sender. Blinks slowly if
the current source listened to is muted.
Note: This indicator will not be lit if the Rocketboost wireless sender connected to your audio
source is turned off. If you have multiple sources in your Rocketboost network, press the NEXT
SOURCE button to find the next available source.
2
3
Volume control knob Turn this knob to increase or decrease the volume.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
#
4
Feature
Description
Connect button
If the wireless subwoofer is in standby, press to turn the wireless speaker on. Press and hold to
initiate wireless joining. Press again to go to standby mode.
Next Source button Press to select different audio streams on your Rocketboost wireless network. Each press
moves to the next source.
5
6
Low pass filter
Turn full clockwise to set the filter cut-off frequency to 150 Hz and full counterclockwise to set
the filter cut-off frequency to 80 Hz.
Input select switch
Select the Aux position (up position) to use the subwoofer in wired auxiliary input mode.
Select the Wireless position (down position) to use the subwoofer in Rocketboost wireless
input mode.
7
Aux input
When using the subwoofer in Aux or Wired input mode, connect the subwoofer output of your
AV receiver to this input jack.
8
9
Power switch
Click to the right to turn the power on. Click to the left to turn the power off.
Connecting your subwoofer
Connecting the power
1
Plug the AC power cord into a 120 V wall outlet.
2
Click the Power switch to the right to turn on the wireless subwoofer.
The power indicator turns on.
Deciding on wired or wireless mode
This product can be used as a standard wired subwoofer or you can
upgrade to wireless when the subwoofer is used with other Rocketboost
products. If you want to setup the subwoofer in wired mode go to
“Setting up and using your subwoofer in wired mode” on page 8. If you
want to setup the subwoofer in wireless mode go to “Setting up and using
your subwoofer in wireless mode” on page 9.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Setting up and using your subwoofer in wired mode
Your subwoofer can be used as a standard wired subwoofer with most AV
receivers.
Connecting your subwoofer for wired mode
To connect your subwoofer for wired mode:
1
Connect the subwoofer output of your receiver to the Aux input of the
subwoofer using a subwoofer cable. If your receiver does not have a
subwoofer output, connect a left or right pre-amplifier output from
your receiver to the Aux input.
2
Make sure that the INPUT SELECT switch on the subwoofer is set to
Aux (wired).
Setting the low pass filter
Setting the low pass filter lets you select the frequency range of the sound
that your subwoofer will reproduce and amplify. Turning the knob
counterclockwise to 80 Hz sets the subwoofer to reproduce frequencies
lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to
reproduce frequencies lower than 150 Hz. The best setting depends on
the other speakers you are using with the subwoofer. If you are unsure of
the best setting, set this at 150 Hz.
Listening to music and setting the volume
To listen to music and set the volume:
1
Turn on your subwoofer and audio source and play music or a movie
that you can easily hear the bass sound on.
2
Adjust the volume level on your wireless subwoofer by turning the
volume knob clockwise or counterclockwise. The level should be set
so that the bass volume level best matches the volume level of the rest
of your audio system.
Once you have set this volume level you can leave it at this setting. The
subwoofer volume will then automatically adjust when you change
the volume of your audio source.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Setting up and using your subwoofer in wireless mode
How does Rocketboost work?
Rocketboost technology can connect all audio devices throughout your
home to form a home audio network.
Rocketboost products include “Senders,” which send or transmit audio
streams, and “Receivers,” which receive the audio. This lets you listen to
music from your Sender in other rooms using your Receiver.
For a wireless subwoofer application, the wireless subwoofer is a
Rocketboost receiver. A Rocketboost sender device needs to be
connected to your AV receiver or other audio source to send the
subwoofer channel to the wireless subwoofer.
The following section shows example configurations for different types of
audio sources.
Example configurations
Setting up your subwoofer for wireless operation depends on the audio
product that you want to use your subwoofer with. For example, you can
use the subwoofer with your AV receiver, a Rocketboost-compatible
soundbar, or even directly with your Rocketboost compatible TV. The
following diagrams show example configurations and other Rocketboost
products that are required to make your wireless connnection. For
additional information on wireless setup for those products, see the user
guides for those products.
Example 1 shows a typical AV receiver, connected to an RF-RBUSB
Rocketboost wireless sender, connected wirelessly to the subwoofer (this
solution is compatible with most AV receivers):
Typical AV Receiver + RF-RBUSB Rocketboost wireless sender/receiver
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Example 2 shows an Insignia NS-AV511 Receiver, equipped with an
RF-RBCARD Rocketboost wireless card, connected wirelessly to the
subwoofer:
NS-AV511 AV Receiver + RF-RBCARD Rocketboost wireless card
Example 3 shows an Insignia NS-SBAR-A Soundbar, equipped with an
RF-RBCARD Rocketboost wireless card, connected wirelessly to the
subwoofer:
NS-SBAR-A Soundbar + RF-RBCARD Rocketboost wireless card
Example 4 shows an Insignia NS-32E859A11/NS-42E859A11 TV, equipped
with an RF-RBCARD Rocketboost wireless card, connected wirelessly to
the subwoofer:
Insignia NS-32E859A11/
NS-42E859A11 TV + RF-RBCARD
Rocketboost wireless card
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Connecting your subwoofer for wireless mode
Important
Every Rocketboost network must contain one hub device, which helps
devices join the network. The network can have only one hub, which you
can enable using the hub switch on the back of all Rocketboost senders
and wireless sender/receivers.
The wireless subwoofer is a Rocketboost wireless receiver and is not a hub
device. To add this wireless receiver to your Rocketboost network, you
need to join it to your hub device. This section describes the joining
process.
Important
Hub devices must always have power for your network to
operate. The hub device can be in standby (power saving) mode,
but must stay plugged in.
Note
Rocketboost devices have their own memory. After the devices
are joined once, they remember each other and join
automatically when your devices are powered on again. Because
of this, you can join all of your network components in the same
room before installing them in their permanent locations
throughout the house.
To establish communications:
1
Press the Power button on the Rocketboost hub device to turn it on.
2
Make sure that the INPUT SELECT switch on the subwoofer is set to
Wireless.
3
4
Make sure that the power switch on your subwoofer is turned on. If the
power indicator is red (Standby mode), briefly press the CONNECT
button to turn on your subwoofer (the power indicator turns blue).
Press and hold the Power button on the Rocketboost hub device for
more than three seconds to put it into joining mode. The power
indicator starts blinking rapidly and the unit will stay in joining mode
for 30 seconds.
5
Press and hold the CONNECT button on your subwoofer for more than
three seconds to put it into joining mode.
•
When successfully joined, the power indicators on both
products will stop blinking and stay on.
•
If joining fails after 30 seconds, the power indicators will begin
flashing at a slower rate. If this occurs, repeat the above steps.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Note
Note
Some Rocketboost hub devices use an on-screen graphical user
interface to assist with the joining process (for example, Insignia
NS-AV511 AV Receiver and NS-32E859A11/NS-42E859A11 TVs).
In this case follow the User Guide for those products to wirelessly
join them to the wireless subwoofer.
You must join the wireless subwoofer to your Rocketboost hub
device. If you have mulitple Rocketboost devices, the hub may
not be the Rocketboost sender that is connected to the audio
source you want to use with your subwoofer. However, after
joining the subwoofer to your hub device, your subwoofer will
be able to connect to the sender you are using with the
subwoofer.
Setting the low pass filter
Setting the low pass filter lets you select the frequency range of the sound
that your subwoofer will reproduce and amplify. Turning the knob
counterclockwise to 80 Hz sets the subwoofer to reproduce frequencies
lower than 80 Hz. Turning the knob clockwise to 150 Hz sets it to
reproduce frequencies lower than 150 Hz. The best setting depends on
the other speakers you are using with the subwoofer. If you are unsure of
the best setting, set this at 150 Hz.
If you are using the subwoofer in wireless mode with a Rocketboost
enabled AV receiver or soundbar (for example Insignia NS-AV511 or
NS-SBAR/NS-SBAR-A), you don't need to set the low pass filter. These
products send a pre-filtered audio stream to the subwoofer that is set to
If you are using the subwoofer in wireless mode with
Rocketboost-enabled Insignia TV models NS-32E859A11 or
NS-42E859A11, set the low pass filter to 150 Hz.
Listening to music and setting the volume
To listen to music and set the volume:
1
Turn on your subwoofer and audio source. The power indicator LED on
the subwoofer should light steadily. If it is blinking you need to rejoin
the subwoofer to your Rocketboost hub device. See “Connecting your
subwoofer for wireless mode” on page 11.
2
3
Play music or a movie that you can easily hear the bass sound on.
Start with the volume level of the sub at its maximum setting. If you
are not hearing the audio that matches the music or movie you are
playing, press the Next Souce button on the subwoofer until you can
hear it. This is because Rocketboost receivers (including the
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
subwoofer) can receive audio from any Rocketboost sender in your
network. Each time you press the Next Source button, the wireless
subwoofer moves to the next audio source in your network.
4
5
Adjust the volume level on your wireless subwoofer by turning the
Volume knob clockwise or counterclockwise. The level should be set
so that the bass volume level best matches the volume level of the rest
of your audio system.
Note that some Rocketboost enabled devices (for example, the
Insignia NS-SBAR/NS-SBAR-A soundbar) send both a subwoofer signal
(volume controlled by the sending device) and a second room audio
signal (not volume controlled by the sending device). To confirm you
are connected to the subwoofer signal, turn the volume up and down
at the sending device (for example, the Insignia NS-SBAR/NS-SBAR-A
soundbar), and listen to make sure that the subwoofer volume level
changes. If it does not, press Next Source on the subwoofer to select
the other audio signal from the sending device.
For more information see the user guide for your other Rocketboost
enabled product.
Turning off the system
To turn off the system:
1
The subwoofer will automatically switch to standby mode when there
is no audio signal present after a timeout period. When the audio
signal resumes, the subwoofer will automatically power on.
2
If you choose to turn off the subwoofer completely, click the Power
switch to the left (off position). The power indicator goes off.
Note
If you are using wireless mode, your Rocketboost Hub device
must always have power for your Rocketboost network to
operate. The hub device can be in standby (power saving) mode,
but must stay plugged in.
Rocketboost Network Capabilities
The maximum number of Rocketboost devices in a Rocketboost Network
is nine. If you already have nine devices and attempt to join another one,
then joining will fail for the new device.
Note
If you want to remove a device from your Rocketboost network
you need to rejoin it to a different hub device (this basically
creates a second Rocketboost network).
The maximum number of audio streams that can be sent simultaneously
on the Rocketboost network is:
•
5 stereo CD quality -or-
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
•
•
•
1 stereo HD quality + 3 CD quality -or-
2 stereo HD quality + 2 stereo CD quality -or-
3 stereo HD quality
Note
HD streams are available if using the wireless sender from the
RF-RBKIT (Wireless HD Audio Starter Kit). If your system is in a
maximum audio stream state, then the Send mode indicator will
not light on the wireless sender devices that have exceeded the
maximum. To use those device's audio streams, turn off one of
your other wireless senders.
Maintaining your system
Use a soft cloth dampened with a weak solution of mild detergent and
water. Dry the device immediately afterwards with a clean cloth. Do not
use abrasive cloth, thinners, alcohol, or other chemical solvents, because
they may damage the finish or remove the panel lettering.
Cautions
• Do not block the ventilation openings.
• If the power cord is damaged, it must be repaired by a
qualified technician.
Troubleshooting
Check this information for a possible solution before calling for assistance.
General troubleshooting
•
Every Rocketboost network must contain only one hub device, which
helps other Rocketboost devices join the network.
•
•
The wireless subwoofer must be wirelessly connected or joined
to the Rocketboost hub device (see “Connecting your
subwoofer for wireless mode” on page 11).
You can turn any Rocketboost wireless sender or wireless
sender/receiver into a hub by using the HUB STATUS or HUB
ENABLE switch on the back of the device. The network can only
have one hub.
•
•
The hub device must have power for the audio network to
operate. The hub can be in standby (power-saving mode), but
must remain plugged in.
The existing hub device is the device with the green power
indicator.
•
The unobstructed operating range of a Rocketboost network is 150 feet
(45 meters).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
•
The Rocketboost network must contain at least one wireless sender
device and one wireless receiver device. The wireless subwoofer is a
wireless receiver and it is used with a wireless sender (sold separately).
Problem
Solution
No communication between the
Rocketboost sender and
subwoofer.
•
Make sure that the power indicators of the Rocketboost wireless sender and
subwoofer are lit solidly. If the indicators are blinking, see “Connecting your
subwoofer for wireless mode” on page 11.
If the joining process is failing, make sure that only one of your Rocketboost devices
has the Hub switch enabled. Note that the hub device is the only device with the
green power indicator. Non-hub devices have a blue power indicator.
•
No sound
•
Check the volume level of the wireless subwoofer or audio sources connected to the
wireless sender.
•
•
Make sure that all of the audio cables are connected correctly.
Make sure that the power indicators of the Rocketboost wireless sender and
wireless receiver devices are lit solidly. If the indicators are blinking, see
“Connecting your subwoofer for wireless mode” on page 11.
Make sure the audio source connected to your wireless sender is On.
Make sure the wireless sender or wireless receiver devices are not Muted. The
Receive mode indicator light blinks when the device is muted.
•
•
Sound interference
•
•
Experiment with different orientations or locations of your wireless sender device.
Make sure your wireless sender device is more than 18 inches from any WiFi routers
you may have.
•
•
•
Shorten the distance between the Rocketboost wireless devices. The maximum
distance is 150 feet (45 m), but this distance is reduced as the wireless signal passes
through walls or other obstructions.
It is possible other devices like cordless phones, microwaves, wireless routers, etc.
may be causing interference. Try turning one device off at a time to determine
which device is causing interference.
If your cordless phone or wireless router is causing interference try changing the
channel it is using. Please refer to your device’s owner manual.
Specifications
Wireless Subwoofer
120 V AC~60 Hz/0.9 A
Power supply
2.0 Vrms
80 Hz - 150 Hz
3 ohms
Maximum RCA input signal level
Crossover
Speaker impedance
Rated output power (at 10% thd)
75 W
11 × 11 × 11 inches
(28 × 28 × 28 cm)
Dimensions (W ×H × D)
10.4 lb. (4.7 kg)
Weight
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Legal notices
FCC and IC Information:
This device complies with Part 15 of the FCC Rules and Industry
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC & IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set
forth for an uncontrolled environment and meets the exemption from the
routine evaluation limits in section 2.5 of RSS 102.
1. This Transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
2. This equipment complies with FCC and IC RF radiation exposure limits
set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
The device meets the exemption from the routine evaluation limits in
section 2.5 of RSS 102 and users can obtain Canadian information on RF
exposure and compliance from the Canadian Representative Richardson
Technical Services Inc., Suite 304, 131 Wurtemburg St., Ottawa, Ontario,
Canada. Tel: 613 562 3827
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
Rocketboost is a trademark of BBY Solutions, Inc.
Information for Users on Disposal of Old Equipment
European Union
Note: This symbol is only valid in the European Union.
This symbol indicates that the electrical and electronic
equipment should not be disposed as general household
waste at its end-of-life. Instead, the product should be
handed over to the applicable collection point for the
recycling in accordance with your national legislation.
By disposing of this product correctly, you will help to
conserve natural resources and will help prevent potential
negative effects on the environment and human health that could
otherwise be caused by inappropriate waste handling of this product. For
more information about collection point and recycling of this product,
please contact your local municipal office, your household waste disposal
service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
Other Countries Outside the European Union
If you wish to dispose of this product, please do so in accordance with
applicable national legislation or other rules in your country for the
treatment of old electrical and electronic equipment.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
One-year limited warranty
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new NS-RSW211
(“Product”), that the Product shall be free of defects in the original manufacture of the
material or workmanship for a period of one (1) year from the date of your purchase of the
Product (“Warranty Period”). This Product must be purchased from an authorized dealer of
Insignia brand products and packaged with this warranty statement. This warranty does not
cover refurbished Product. If you notify Insignia during the Warranty Period of a defect
covered by this warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. The
purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of
the Product is determined to be defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or
(2) replace the Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of Insignia and are
not returned to you. If service of Products or parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the
Product to the store you purchased it from. Make sure that you place the Product in its
original packaging or packaging that provides the same amount of protection as the original
packaging. If you purchased the Product from an online web site, mail your original receipt
and the Product to the address listed on the web site. Make sure that you put the Product in
its original packaging or packaging that provides the same amount of protection as the
original packaging.
To obtain in-home warranty service for a television with a screen 25 inches or larger, call
1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have
an Insignia-approved repair person dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the United States,
Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the antenna
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Rocketboost™ Wireless Subwoofer
•
Plasma display panel damaged by static (non-moving) images applied for lengthy
periods (burn-in).
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility authorized by Insignia to service the
Product
•
•
•
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.
INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO
THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS
OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM
STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective owners.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2011 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
11-0334
Download from Www.Somanuals.com. All Manuals Search And Download.
|