User Guide
Insignia ATX 400 and ATX 520 Watt Power Supplies
NS-PCW4050/NS-PCW4050-C
NS-PCW5250/NS-PCW5250-C
Before using your new product, please read these instructions to prevent any damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Power supply components
and features
Congratulations on your choice of this Insignia
NS-PCW4050/NS-PCW4050-C or Insignia
Power supply features include:
NS-PCW5250/NS-PCW5250-C power supply. Please
read this manual carefully and follow the
instructions before installing the power supply.
• The 520 Watt complies with the newest Intel
standard ATX 12V V2.31 and is downward
compatible to V2.2 and V2.0. The 400 Watt
complies with Intel standard ATX 12V V2.2 and is
downward compatible with V2.0
• Supports Intel and AMD dual-core and multi-core
processors
This is an advanced power supply with excellent
acoustic and thermal performance and intelligent
thermal fan control technology that makes it
virtually silent. The power supply provides perfect
protection for your system and comes equipped
with two +12V rails that can handle a maximum
load of 18A for additional system reliability.
• High-performance components designed for
better reliability
• Dual +12 V outputs for higher power capacity
• One 4+4 pin +12 V CPU connector for high-end
Safety information
CPUs
• One 6+2 pin PCI Express connector for high-end
video cards
• 140 mm low-noise cooling fan
• All DC cables are mesh-sleeved. The length is
15.75 in. (40 cm)
Safety regulations
The power supply meets safety guidelines and
regulations for UL, cUL, and FCC.
• High reliability, including built-in protection
circuit OVP, OLP, SCP, and line input fuse
protection
Power supply components include:
NS-PCW4050/NS-PCW4050-C power supply
Important safety instructions
Voltage switch
• Do not place your system near a radiator or other
heat source.
• Do not place your system close to a source of
strong magnetic fields.
AC power
jack
• Do not place your system in a moist or dusty
environment, or in an area subject to strong
vibration.
ON/OFF switch
Cooling fan
• Do not place your system in direct sunlight.
• Your computer must operate at a stable AC input
voltage.
• Your computer should not be situated directly
next to a heater or another heat source.
Ventilation
grating
• Do not open the cover on the power supply case.
Dangerous voltages are present inside the cover.
Your warranty is void if the cover is removed.
• Never operate the device with wet or moist
hands.
NS-PCW5250/NS-PCW5250-C power supply
• Never place items in the openings or fan of the
power supply.
• Make sure that the power cord is plugged into a
powered electrical outlet.
• Make sure that the power cord is plugged into the
power supply.
• Make sure that you connect your power supply
properly. Check your motherboard and graphic
card manuals for compatibility before connecting
the power supply to any of your devices.
AC power
jack
Cooling fan
Caution (for NS-PCW4050/NS-PCW4050-C only): Check the red
power supply voltage switch setting before installation. The
setting should be the same as your local power voltage (115 V
for North America and 230 V for Europe and other countries).
Change the voltage setting if necessary. Failure to take this
precaution could result in damage to your equipment and could
void your warranty.
Ventilation
grating
Note: If the power supply does not work correctly, contact our
service center immediately at (800) 305-2204.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect all power supply cables. Make sure that
Package contents
each connection is secure.
Tip: If you are replacing an old power supply, reference your notes
from when you removed the old power supply to make sure you
are connecting all of your components correctly.
• 400-Watt or 520-Watt ATX Power Supply
• AC power cord
• User Guide
a
Connect the 20+4-pin main power
connector to your motherboard. If your
computer has an older motherboard with a
20-pin main power socket, connect only the
20-pin main power connector.
Installing the power supply
Preparing your power supply:
1 Make sure your motherboard, graphics card,
and other components are compatible with this
power supply. Refer to the documentation that
came with each component.
2 Check your local AC voltage (115 VAC for USA,
Canada, Japan, and others, and 230 VAC for
Europe, Southeast, Asia, and others). The
NS-PCW5250/NS-PCW5250-C is only
compatible with 115 VAC.
3 For NS-PCW4050/NS-PCW4050-C only: Make
sure that the red voltage switch (located on the
back of the power supply) is set to the correct
voltage setting.
Caution: Using the incorrect voltage can damage the power supply
b Connect the 8-pin (4+4) or 4-pin +12 V
and connected equipment and may void your warranty.
power connector to your motherboard.
Are you replacing a power supply?
• Yes, start at “Removing your old power supply”
below.
• No, go to “Installing your power supply” on pg 2.
Removing your old power supply:
1 Turn off your computer.
2 Unplug the power cord from your computer.
3 Open your computer case. (See the instructions
that came with your computer.)
4 Disconnect your old power supply from all
computer components.
Tip: Make sure to note each component and the connector type for
when you need to connect them to your new power supply.
c
Connect all of the following that apply to
your computer:
5 Remove the screws that secure your old power
supply to your computer case, then remove it
from the case.
i
The 4-pin peripheral connectors (4) to
any computer components with a 4-pin
connector, such as an IDE drive or a case
fan.
Installing your power supply:
1 Position your power supply in the computer
case, making sure that the AC power jack and
cooling fan are facing out, then secure your
power supply using the screws included with
your computer case.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
ii The floppy drive power connector to the
Connector types
floppy drive.
Connector
Illustration
Connect to
The motherboard
20+4-PIN Main Power
4-PIN+ 12V -
(400 Watt PS only)
The motherboard (for
CPU power)
-------------------------------OR-----------------------------------
iii The Serial ATA connectors (4) to any
computer components that have a Serial
ATA connector, such as a CD/DVD/Blu-ray
or hard drive.
8-PIN (4+4) + 12V -
(520 Watt PS only)
The motherboard (for
CPU power)
4-PIN peripheral -
Total 3 connectors
Internal IDE drives
Internal SATA drives
3.25” floppy drive
Serial ATA (SATA) -
Total 4 connectors
Floppy drive
iv The 8-pin PCI-E or 6-pin PCI-E connector
to a PCI-E graphic card.
PCI Express card (such as
a graphics card) that
requires power
6-PIN PCI-E
(400 Watt PS only)
------------------------------OR--------------------------------------
PCI Express card (such as
8-PIN PCI-E
a graphics card) that
(520 Watt PS only)
requires power
Troubleshooting
If your new power supply is not working correctly,
try the following:
Caution: Make sure that all connectors are securely connected.
Incorrect connections could prevent your computer from starting
and could damage some components.
• Make sure that the computer power cord is firmly
plugged into the power cord connector on your
computer.
• If you are using a surge protector, make sure that
it is plugged in and turned on.
• Make sure that the wall outlet is supplying power.
For example, plug a lamp into the outlet and turn
it on.
5 Close your computer case.
6 Connect the AC power cord to the power
supply, then to a surge protector or wall outlet.
7 Turn on your computer by pressing the power
button on the front of the case.
• If you have the NS-PCW4050/NS-PCW4050-C,
make sure that the red voltage switch (located on
the back of the power supply) is set to the correct
voltage setting. The setting for the United States
is 115 V. The setting for Europe and other
countries is 230 V.
Note: For more information, refer to your computer’s user guide.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Make sure that the system board power supply
cable is securely connected to the system board
connector (24 pin or 20 pin).
• The power supply may be overloaded. Unplug
any unnecessary components, such as extra
drives, then try again.
• Make sure that all power supply cables to
peripheral devices, such as hard drives, optical
drives, and fans, are securely connected. Any
loose power cable connections may cause the
power supply to operate incorrectly.
• If the power supply is very hot, check the case
fans and the power supply fan. Replace any faulty
case fans, then try again.
• If you have the NS-PCW4050/NS-PCW4050-C,
make sure the power switch (I/O) on the back of
the power supply is set to ON (I).
Specifications
400 Watt Power Supply
Legal notices
Output Voltage +12V1DC +12V2DC +5VDC +3.3VDC -12VDC +5Vsb
FCC warning
Max Load
Min Load
Max Watt
Peak Power
Regulation
Ripple
8.0 A
1.0 A
14.0 A 20.0 A 20.0 A 0.3 A 2.5 A
This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful
interference unless the modifications are expressly approved in
the instruction manual.The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
1.0 A
0.3 A
300 W
400 W
5%
0.5 A
0.0 A 0.0 A
5%
5%
5%
10%
5%
Caution: Any change or modification to the equipment not
expressly approved by the manufacturer or its authorized
parties could void your authority to operate the equipment.
120 mV 120 mV 50 mV 50 mV 120 mV 50 mV
120 mV 120 mV 50 mV 50 mV 120 mV 50 mV
100-500 mS
Noise
Power Good
Signal
UL statement
Any information or documentation provided to you involving UL
Mark services is provided on behalf of Underwriters Laboratories,
Power Fail
Signal
1 mS Min.
Inc.
Products that bear the UL Mark are identical to those that were
evaluated by UL and found to be technically compliant with the
UL’s applicable requirements.
For further information regarding the use of UL marks, please
Hold-up
Time
16 mS Min.
Dimensions 5.5 × 3.4 × 5.9 inches (W × H × L)
140 × 86 × 150 mm (W × H × L)
520 Watt Power Supply
Output Voltage +12V1DC +12V2DC +5VDC +3.3VDC -12VDC +5Vsb
Max Load
Min Load
Max Watt
Peak Power
Regulation
Ripple
18.0 A 16.0 A 18.0 A 20.0 A 0.3 A
2.0 A
1.0 A
1.0 A
0.5 A
420 W
520 W
5%
0.3 A
0.0 A 0.005 A
5%
5%
5%
10%
5%
120 mV 120 mV 50 mV 50 mV 120 mV 50 mV
Noise
200 mV 200 mV 100 mV 100 mV 200 mV 100
mV
Power Good
Signal
100-500 mS
Power Fail
Signal
1 mS Min.
Hold-up
Time
16 mS Min.
Dimensions 5.5 × 3.4 × 5.9 inches (W × H × L)
140 × 86 × 150 mm (W × H × L)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Connection to an incorrect voltage or power supply
Attempted repair by any person not authorized by Insignia
to service the Product
One-year limited warranty -
Insignia
•
•
Products sold “as is” or “with all faults”
Consumables, including but not limited to batteries (i.e. AA,
AAA, C etc.)
Products where the factory applied serial number has been
altered or removed
Loss or Theft of this product or any part of the product
Display panels containing up to three (3) pixel failures (dots
that are dark or incorrectly illuminated) grouped in an area
smaller than one tenth (1/10) of the display size or up to
five (5) pixel failures throughout the display. (Pixel based
displays may contain a limited number of pixels that may
not function normally.)
Definitions:
•
The Distributor* of Insignia branded products warrants to you,
the original purchaser of this new Insignia-branded product
(“Product”), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a
period of one (1) year from the date of your purchase of the
Product (“Warranty Period”).
•
•
For this warranty to apply, your Product must be purchased in
the United States or Canada from a Best Buy branded or Future
this warranty statement.
•
Failures or Damage caused by any contact including but
not limited to liquids, gels or pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
How long does the coverage last?
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT,
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. Your purchase date is printed on the
receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail
store location, please take your original receipt and the Product
to any Best Buy or Future Shop store. Make sure that you place
the Product in its original packaging or packaging that provides
the same amount of protection as the original packaging. If you
purchased the Product from a Best Buy or Future Shop online
to the address listed on the web site. Make sure that you put the
Product in its original packaging or packaging that provides the
same amount of protection as the original packaging.
To obtain warranty service, in the United States call
1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call
1-800-663-2275. Call agents may diagnose and correct the issue
over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at
Best Buy or Future Shop branded retail stores or websites to the
original purchaser of the product in the county where the
original purchase was made.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
Customer instruction/education
Installation
Set up adjustments
Cosmetic damage
Damage due to weather, lightning, and other acts of God,
such as power surges
•
•
•
•
•
Accidental damage
Misuse
Abuse
Negligence
Commercial purposes/use, including but not limited to use
in a place of business or in communal areas of a multiple
dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.
Modification of any part of the Product, including the
antenna
Display panel damaged by static (non-moving) images
applied for lengthy periods (burn-in).
Damage due to incorrect operation or maintenance
•
•
•
5
Download from Www.Somanuals.com. All Manuals Search And Download.
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH
14-0324
Download from Www.Somanuals.com. All Manuals Search And Download.
|