Insignia Paper Shredder NS PS06CC User Manual

User Guide  
Cross-Cut Paper Shredder  
NS-PS06CC/NS-PS06CC-C  
Before using your new product, please read these instructions to prevent any damage.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 NEVER dispose of flammable chemicals or materials that have come  
into contact with flammable chemicals (for example, nail polish,  
acetone, gasoline) in the shredder basket.  
13 Never shred plastic (except credit cards), any hard materials,  
continuous forms, newsprint, or anything with adhesives including  
labels and envelopes.  
14 Do not activate the reverse function while shredding credit cards.  
15 Plug the shredder into a nearby, easily accessible power outlet.  
16 Always turn the shredder off and unplug the power cord from the AC  
outlet before cleaning it, moving it, or emptying the wastebasket.  
17 Never let the wastebasket become full. This will lead to shredded  
material being pulled back up into the shredder and cause jams.  
18 Never place the shredder near water or any heat source.  
19 Keep the wastebasket emptied so that the shredder output is not  
impeded.  
20 Do not use the shredder if the power cord is damaged in any way.  
21 Do not attempt to service this product yourself as doing so may  
expose you to sharp cutting blades and/or electricity and will void the  
manufacturers warranty.  
22 Never try to clean the shredder blade.  
23 Never shred beyond the specified sheet capacity. May result in  
extensive damage to the machine.  
24 Operate the shredder from the power source specified on the label. If  
you are unsure about the power source, contact an electrician.  
25 If an extension cord is used, make sure that the total amp rating of the  
products plugged into the extension cord do not exceed the  
extension cord amp rating and that the total of all products plugged  
into the wall out do not exceed 15 amps.  
Warning: To avoid injury to yourself and others, please follow  
safety instructions before operating this device.  
Read instructions before use.  
Avoid touching the document feed opening with your hands.  
Never insert your hand or fingers into the feed opening.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product is not intended for use by children (product is not a  
toy).  
Do not insert foreign objects into the document feed opening.  
Do not spray or keep any aerosol products in or around  
shredder.  
Avoid loose clothing or jewelry touching the document feed  
opening.  
Do not shred paper with paperclips or staples. Do not shred  
gummed or wet paper.  
Shred paper and credit cards only. No cardboard, plastic  
sheets, or CD/DVDs.  
Do not exceed the shredders maximum capacity of six sheets.  
Always unplug the unit when not in use to prevent accidents.  
Do not operate the unit with a damaged power cord.  
Do not shred continuously for more than two minutes.  
Avoid getting your hair or face near the document feed  
opening. Do not let hair touch the document feed opening.  
Serious injury may result.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
6-sheet capacity (20-lb paper) (Note: One folded sheet is equivalent to  
two sheets.)  
Package contents  
Wastebasket  
Shredder head  
User Guide  
Shredder details  
Ready  
Overheat  
6
#
Feature  
Description  
1
2
3
Shredder head Contains the control panel and the cutting head.  
Waste basket  
Clear window  
Shredded paper goes into this basket. Keep emptied.  
Empty the waste basket when the shredded paper reaches 2/3 of  
capacity.  
4
5
Switch  
A three-position slide switch for On/Auto, Off, and Rev.  
Lights green when the power is on.  
Ready LED  
indicator  
6
7
Overheat LED  
indicator  
Lights red when the shredder is overheated.  
Feed opening  
Put paper (maximum of six sheets) or credit cards into this opening to  
shred.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting up the shredder  
Warning  
Crosscut shredders have very sharp exposed blades on the  
underside. Use care when mounting the shredder on the  
wastebasket.  
Caution  
The shredder should not be plugged in during assembly.  
Note  
The following illustrations are for information purposes only.  
Your actual shredder may look somewhat different than the  
shredder shown.  
To set up the shredder:  
1 Position the shredder head over the basket.  
2
Place the shredder head on the basket so that it solidly rests on the  
basket edges.  
Note  
Always make sure that these two labels are aligned on the same  
side of the shredder when you place the shredder head onto the  
basket. This shredder has a safety interlock which prevents it  
from operating unless the shredder head is placed on the basket  
correctly.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the shredder  
Note  
Prepare paper to be shredded by removing staples and paper  
clips from the paper. Make sure that each batch of paper does  
not exceed the recommended capacity of six sheets.  
To use the shredder:  
Caution  
Do not overfeed the shredder: Shredding beyond the  
specified sheet capacity can result in extensive damage to the  
shredder. Overfeeding will strain the machine and quickly wear  
and break the cutting blades and internal components.  
1
Plug in the power cord.  
2
3
To begin shredding, locate the switch on the top of the shredder and  
select the On/Auto mode. The green power LED indicates the shredder  
is on and ready to use.  
Caution  
Never shred paper clips, window or insulated envelopes,  
continuous forms, newsprint, transparencies, laminated  
documents, cardboard, any items with adhesives, hard  
materials, or plastic (except credit cards).  
Slide the paper or credit card into the feed opening. The shredder  
automatically starts after the paper or credit card has been inserted.  
The shredder stops automatically when it has finished shredding.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintaining  
Caution  
Failure to properly maintain your shredder will void the  
warranty.  
Crosscut shredders require regular oil lubrication for optimal performance  
and extended lifespan. We recommend you oil your shredder once a  
month. To lubricate your shredder, drizzle some basic vegetable or  
cooking oil (nothing flammable or petroleum based) onto a few sheets of  
paper and feed it into the shredder.  
Do not spray or keep any aerosol products in or around shredder.  
DO NOT USE CANNED AIR ON THE SHREDDER.  
Be sure to periodically empty the wastebasket to avoid overloading and  
damaging the cutting mechanism.  
To clean the shredder:  
ALWAYS UNPLUG THE SHREDDER BEFORE CLEANING!  
Only clean the shredder by carefully wiping the unit with a soft cloth or  
towel moistened with mild soap and water. Dry the unit thoroughly.  
Do not clean or immerse the shredder in water. Having the unit wet may  
result in damage or malfunction to the electrical components. If the  
shredder happens to get wet, be sure to completely dry the unit  
immediately with a cloth or towel.  
Never use anything flammable to clean the shredder. This may result in  
serious injury or damage to the product.  
Troubleshooting  
If there is a problem with your shredder, check below for the symptoms  
and steps to resolve. If you continue to have problems, contact customer  
support at our Service Center. DO NOT ATTEMPT TO REPAIR BY OPENING  
THE SHREDDER HEAD. This will completely void the product warranty.  
Symptom  
Possible Solutions  
The shredder does not work  
at all.  
Make sure that the shredder is plugged in and that the outlet it is  
plugged into is in good working order.  
The shredder may overheat with extended use. In the event that  
the shredder has shred continuously beyond the maximum  
running time and has overheated, the shredder will automatically  
shut off. If this happens, switch the shredder off for 30 minutes or  
longer before resuming normal operation.  
If using a plastic bag to line the wastebasket, remove it. The bag  
may be the cause of the shredder not operating properly.  
The activation sensor of the shredder is located near the center of  
the feed slot. Be sure to feed directly into the center area to trigger  
the machine (especially applies to smaller pieces of paper or credit  
cards).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Symptom  
Possible Solutions  
The shredder runs in Rev  
mode but not in On/Auto  
mode.  
While in On/Auto mode, the motor will not start running until  
paper is inserted into the feed slot. Set the unit to On/Auto and  
insert the paper to be shredded. It is normal for the motor to run  
for a moment after setting it to On/Auto but it should stop until  
paper is inserted. The sensor that activates the shredder in On/  
Auto mode is located directly in the center of the slot. If the paper  
you are inserting is narrow, it may not be detected by the sensor. It  
is possible that the sensor, which activates the shredder, has  
become blocked with paper. Insert an index card, directly in the  
center of the feed slot, and apply force. This will usually clear any  
paper blocking the sensor.  
There is a paper jam in the  
shredder.  
Switch the shredder over into Rev (reverse) mode. While in reverse,  
the shredder will back up and loosen the jammed paper. If  
required, you may need to tug and remove several sheets to  
effectively clear the machine. When jammed paper is loosened or  
removed, switch back to the On/Auto mode to continue shredding.  
Repeat steps if needed.  
CAUTION: Keep your hands away from the feed opening.  
With stubborn situations where the reverse function does not help,  
you may loosen the jammed paper with shredder oil (cooking oil is  
acceptable, nothing aerosol). Start by drizzling oil into the blades  
where the paper is jammed. Let it soak for about 30 minutes to  
completely saturate. Return the shredder back to On/Auto mode. If  
required, a rigid sheet of cardstock (old greeting card, folded file  
folder, or a sheet torn from a cereal box) can be fed into the  
shredder to help push the jammed paper through.  
The shredder will not stop  
running.  
The sensor that activates the shredder may be blocked. Insert a  
sheet of paper to clear the sensor.  
Specifications  
Product dimensions  
14.3 in H x 12.5 in W x 7.3 in D  
(36.2cm x 31.8cm x 18.5cm )  
Duty cycle  
2 minutes ON / 30 minutes OFF  
Sheet capacity  
Six sheets of 20 lb. bond paper (one folded  
sheet of paper equals two sheets of paper.)  
Paper shred size  
Paper entry width  
Credit card capacity  
Power source  
0.19 x 1.34 in (5 x 34 mm)  
8.8 in (225 mm)  
One at a time  
US - AC 120V, 60Hz, 1.5 A  
3.5 gal. (12 L)  
Basket capacity  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
One-year limited warranty - Insignia  
Definitions:  
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new  
Insignia-branded product (“Product”), that the Product shall be free of defects in the original  
manufacturer of the material or workmanship for a period of one (1) year from the date of  
your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product  
must be purchased in the United States or Canada from a Best Buy or Future Shop  
authorized dealer of Insignia brand products only that are packaged with this warranty  
statement.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product.  
Your purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Insignia and are  
not returned to you. If service of Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location, please take  
your original receipt and the Product to any Best Buy or Future Shop store. Make sure that  
you place the Product in its original packaging or packaging that provides the same amount  
of protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address listed  
on the web site. Make sure that you put the Product in its original packaging or packaging  
that provides the same amount of protection as the original packaging.  
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call  
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents may diagnose and correct  
the issue over the phone.  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at Best Buy or Future Shop  
branded retail stores or websites to the original purchaser of the product in the county  
where the original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
Abuse  
Negligence  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Commercial purposes/use, including but not limited to use in a place of business or in  
communal areas of a multiple dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Display panel damaged by static (non-moving) images applied for lengthy periods  
(burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia to service the Product  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an  
area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures  
throughout the display. (Pixel based displays may contain a limited number of pixels  
that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids, gels or  
pastes.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY  
FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY  
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in China  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
www.insigniaproducts.com 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)  
INSIGNIA is a trademark of Best Buy and its affiliated companies.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2014 Best Buy. All rights reserved.  
Made in China  
V1 ENGLISH  
14-0085  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Invacare Bathroom Aids 1145752 1 User Manual
JVC DVD Recorder CU VD20 User Manual
JVC Flat Panel Television 0607TNH II IM User Manual
JVC Projector LXD700U User Manual
Kaidan Camera Accessories KiWi 2000 User Manual
Kalorik Hot Beverage Maker USK JK 20744 User Manual
Kenmore Camping Equipment 7973 REV 06 07 User Manual
Kenwood Car Stereo System DPX 5030 User Manual
Kodak Digital Camera CD22 User Manual
Kowa Digital Camera nonmyd WX 3D User Manual