User Guide
37" LED TV
NS-37D20SNA14/LE-37MY83
Before using your new product, please read these instructions to prevent any damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adjusting the TV picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Selecting the audio out mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Playing TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Automatically scanning for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Hiding channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Viewing a favorite channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Adding or changing a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Checking the digital signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Automatically adjusting the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Setting or changing the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Blocking unrated TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Setting parental control levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Downloading rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Turning closed captioning on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Selecting the analog closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Selecting the digital closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Customizing digital closed captioning settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Labeling an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Turning Input Sensor on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Using INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Turning INlink on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Turning Device Auto Power Off on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Turning TV Auto Power On on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Turning Audio Receiver on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Displaying a list of INlink-compatible (HDMI CEC) devices . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Waking INlink-compatible (HDMI CEC) devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Opening an INlink-compatible device’s root menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Switching to USB mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Viewing favorite photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Viewing photos in a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Customizing slideshow settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cleaning the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cleaning the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Restoring settings to the defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Viewing system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
INlink (CEC-compatible) device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Programming universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
One-year limited warranty - Insignia Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or
carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions
for proper use of this product.
Don’t let children climb on or play with entertainment
system furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while
watching a program, especially on a “larger-than-life” TV.
Make sure that you place or install the TV where it cannot
be pushed, pulled over, or knocked down.
•
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of
your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory as suitable for your TV.
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks. If
you are unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
Important Safety
Instructions
CAUTION
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
RISK OF ELECTRIC SHOCK
15 The wall plug is the disconnecting device. The
DO NOT OPEN
plug must remain readily operable.
16 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
17 The apparatus should not be exposed to
dripping or splashing, and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
This symbol indicates that
dangerous voltage
constituting a risk of electric
shock is present within your TV.
This label is located on the
back of your TV.
WARNING
This symbol indicates that
there are important operating
and maintenance instructions
in the literature accompanying
your TV.
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
Lightning
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from
lightning and power line surges.
Power lines
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, take extreme care to keep
from touching such power lines or circuits as
contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop
your TV or hit, jolt, or press hard against the LCD
panel. If the screen breaks, be careful of broken
glass.
• If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
Replacement parts
When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety check
Antenna lead-in wire
Grounding clamp
1
2
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV is in correct
operating condition.
Antenna discharge
unit
3
Power source
Grounding
conductors
Ground clamps
4
5
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult
an electrician or your local power company.
Power service
grounding electrode
system
Electric service
equipment
6
7
Servicing
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
Note to CATV system installer
Article 820 of the National Electrical Code,
ANSI/NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding
system of the building as close to the point of cable
entry as practical.
CAUTION
Damage requiring service
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under the
following conditions:
• When the power supply cord or plug is damaged
or frayed.
Condensation
Moisture will form on the TV if the TV is brought
from cool surroundings into a warm room or if the
temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired. To
prevent this, let the TV stand in its new
• If liquid has been spilled or objects have fallen
into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following
the operating instructions. Adjust only those
controls covered by the operating instructions
because incorrect adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
your TV to its normal operation.
• If your TV has been dropped or damaged in any
way.
• When your TV exhibits a distinct change in
performance.
surroundings for about an hour before switching it
on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if
the TV is exposed to the breeze from an air
conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and
sound, operating problems, or even damage, keep
your cordless and cellular telephones away from
the TV.
Outdoor antenna grounding
If an outside antenna or cable system is connected
to your TV, make sure that the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
End of life directives
Your TV contains tin-lead solder. Disposal of this
material may be regulated for environmental
reasons. Your TV also contains material that can be
recycled and reused. For disposal or recycling
information, contact your local authorities to find a
recycler in your area.
ANSI/NFPA No. 70, provides information with
respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV, and are not
considered defects.
requirements for the grounding electrode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-37D20SNA14/LE-37MY83 represents
the state of the art in LED TV design and is designed for reliable and trouble-free performance.
INlink
Enjoy the benefit of having HDMI CEC compatible products plug and play! No setup is needed! CEC technology lets
different components discover and communicate with each other. (See page 56 for instructions on how to use
INlink.)
Installing the stand or wall-mount bracket
Notes
•
•
If you plan to wall-mount your TV, do not install the stand.
Store the stand and stand screws in case you decide to use the stand in
the future.
Installing the stand
To install the stand:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Align the stand column with the TV, then secure the stand column to the TV using two M4 and two T4 screws.
(All screws are provided.)
Screw type
Screw length
12 mm
# of screws
M4
T4
2
2
12 mm
M4 screws
T4 screws
3 Align the TV stand with the stand column, then secure the TV stand to the stand column with four T4 screws. (All
screws are provided.)
Screw type
Screw length
# of screws
T4
12 mm
4
T4 screws
Front of TV
stand
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83
Installing a wall-mount bracket
Warning
This TV is intended to be supported by a UL Listed wall mount bracket with
suitable weight/load. (See “Miscellaneous” on page 70.)
To attach your TV to a wall-mount bracket:
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If the TV stand is installed, remove the four screws that secure the stand column to the TV, then remove the
stand column.
3 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions
that came with the wall-mount bracket for information about how to correctly hang your TV.
Notes
•
The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
•
The mounting holes on the back of your TV take type M6 screws.
15.75 in. (400 mm)
Wall-mount brackets
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Insignia 37" LED TV
#
Item
Description
Receives signals from the remote
control. Do not block.
TV components
Remote control
sensor
1
Package contents
Turns off when your TV is on.
• 37" LED TV
2
3
Lights red when your TV is off
• Remote control and batteries (2 AAA)
• Stand column and screws (4)
• TV stand and screws (4)
• Quick Setup Guide
Power indicator
MENU
(standby mode).
Press to open the on-screen
menu. For more information, see
“Navigating the menus” on
page 37.
• Important Information
Press to open the INPUT SOURCE
Front
list, press CH
or CH
to
select the video input source,
then press INPUT again. For more
information, see “Selecting the
video input source” on page 36.
4
INPUT
In menu mode, press to confirm
selections.
Press to increase or decrease the
volume.
Press to go to the next or previous
channel in the channel list. For
more information, see “Selecting
a channel” on page 38.
5
6
VOL+/VOL–
CH /CH
Press to turn your TV on or off
(standby mode). Warning: When
your TV is off, power still flows
through it. To completely
disconnect power, unplug the
power cord.
7
POWER
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Side
#
Item
Description
Connect headphones, an analog
audio amplifier, a home theater
system, or a sound bar to this jack.
analog audio” on page 30.
1
/AUDIO OUT
Connect a USB flash drive to this
jack to view compatible JPEG
picture files. For more information,
on page 27 and “Using a USB flash
drive” on page 59.
2
USB
Connect a digital audio amplifier or
home theater system to this jack to
listen to TV audio through the
amplifier speakers. For more
information, see “Using digital
audio” on page 29.
Connect an HDMI device to this
jack. For more information, see
“Using HDMI (best)” on pages 12,
18, 22, or 25.
DIGITAL
3
4
OUTPUT
(OPTICAL)
HDMI 2
Connect an HDMI device to this
jack. For more information, see
“Using HDMI (best)” on pages 12,
18, 22, or 25.
OR
Connect the video for a DVI device
to this jack. For more information,
see “Using DVI (same as HDMI but
requires an audio connection)” on
pages 13, 19 or 26.
HDMI 1
(DVI+ARC)
5
OR
Connect a home theater to this jack.
Connect the audio for a DVI device
to this jack. For more information
see, “Using DVI (same as HDMI but
requires an audio connection)” on
pages 13, 19, or 26.
Connect an antenna or cable TV to
this jack. For more information, see
“Using coaxial (good)” on page 16
or “Connecting an antenna or cable
TV (no box)” on page 17.
6
7
DVI AUDIO IN
ANT/CABLE IN
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Back
#
Item
Description
Connect the audio for a
component video device to these
jacks. For more information, see
“Using component video (better)”
on page 14, 20, or 23.
1
OR
L and R AUDIO
Connect the audio for a
composite video device to these
jacks. For more information, see
on page 15, 21, or 24.
The COMPONENT IN/AV IN
Y/VIDEO jack works as one of the
three component video jacks or
as a composite video jack.
Connect the video for a
COMPONENT IN/ component video device to these
AV IN
Y/VIDEO, PB, PR
OR
COMPONENT IN/
AV IN Y/VIDEO
jacks. For more information, see
“Using component video (better)”
on page 14, 20, or 23.
2
OR
Connect the video for a
composite video device to the
COMPONENT IN/AV IN Y/VIDEO
jack. For more information, see
“Using composite video (good)”
on page 15, 21, or 24.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Remote control
#
Button
Description
Press to open the Favorite channel list. For more
information, see “Setting up a favorite channel list” on
10
FAVORITE
Press to control INlink-compatible (HDMI CEC) devices.
For more information, see “Using INlink” on page 56.
11
12
INlink Controls
Press to open the INPUT SOURCE list, press
S
or
T
the remote control to select the video input source,
then press ENTER. For more information, see
“Selecting the video input source” on page 36.
INPUT
13
14
15
(return)
S T W X
(home)
In TV mode, press to return to the previous channel.
Press to navigate in on-screen menus and to adjust
settings.
Press to open the on-screen menu.
Press to display TV status information, such as the
channel number, channel name (if available), or signal
source. For more information, see “Viewing channel
information” on page 38.
16
17
INFO*
CCD
Press to turn closed captioning on or off. You can select
CC Off, CC On, or CC on when mute. For more
information, see “Turning closed captioning on or off”
on page 50.
Press to mute the sound. Press again to restore the
sound.
18
19
MUTE
Press to change TV channels. For more information,
see “Selecting a channel” on page 38.
CH /CH
Press to select the audio mode for an analog program.
You can select:
•
•
•
Mono—Select this option if there is noise or
static on weak stereo broadcasts.
Stereo—Select this option for programs
broadcast in stereo.
SAP—Select this option to listen to a
secondary audio program, if available.
20
MTS/SAP
OR
Press to select the audio language for a digital
program, if alternate languages are available.
Press to select the picture mode. You can select Vivid,
Standard, Energy Savings, Movie, or Custom. For
#
Button
Description
21
22
PICTURE
AUDIO
Press to turn your TV on or off (standby mode).
Warning: When your TV is off, power still flows
through it. To disconnect power, unplug the power
cord.
1
(power)
Press to select the sound mode. You can select
Standard, News, Music, Theater, or Custom. For
more information, see “Sound Mode” in “Adjusting
Press to enter channel numbers and the parental
control password.
2
3
4
Numbers
Press to enter a digital sub-channel number. For more
information, see “Selecting a channel” on page 38.
Press to confirm selections or changes or to open a
sub-menu.
ENTER
5
6
MENU
EXIT
Press to open the on-screen menu.
Press to close the on-screen menu.
Press to change how the picture looks on the screen
(aspect ratio). For more information, see the “Aspect
Ratio” option in “Adjusting the TV picture” on page 38.
7
8
9
ASPECT
VOL+/–
SLEEP
Press to increase or decrease the volume.
Press to set the sleep timer. You can select Off, 5, 10,
15, 30, 60, 90, 120, 180, or 240 minutes. For more
information, see “Setting the sleep timer” on page 54.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Connection
type and
jack
What connection should I
use?
Cable connectors
Optical digital
audio
Your TV has several connection types for
connecting devices to your TV.
For the best video quality, you should connect a
device to the best available connection.
Use the following tables to identify cables:
Connection
Video
type and
jack
Cable connector
quality
Analog audio
input
HDMI
video/audio
Best (use this
if your devices
have HDMI)
Analog audio
output
Component
video (requires
an audio
Better than
composite or
coaxial
connection)
You can use the HDMI 1 (DVI+ARC) jack on your TV
to connect a DVI device to your TV. You need to
attach an HDMI-to-DVI adapter to the end of the
HDMI cable that connects to the DVI device.
Composite video
(requires an
audio
Cautions
•
Check the jacks for position and type
before making any connections.
Loose connections can result in image or
color problems. Make sure that all
connections are tight and secure.
The external audio/video equipment
shown may be different from your
equipment. If you have questions, refer to
the documentation that came with your
equipment.
Better than
coaxial
connection)
•
•
•
Coaxial
video/audio
Good
Always unplug the power cord when
connecting external equipment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see “What connection should I use?” on page 11.
Using HDMI (best)
Side of TV
On your TV
HDMI cable
HDMI cable
connector
HDMI jack
Cable or
satellite box
To connect a cable or satellite box using HDMI:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 1 (DVI+ARC) jack to connect a cable or satellite box.
If you use another HDMI jack, you will not hear sound from the TV speakers.
Side of TV
On your TV
HDMI cable with
HDMI-DVI adapter
HDMI cable 3.5mm audio
connector
cable
connector
Cable or
satellite box
HDMI 1
(DVI+ARC)
jack
DVIAUDIO
IN jack
3.5mm audio cable
To connect a cable or satellite box using DVI:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI 1 (DVI+ARC) jack on the side of your TV.
5 Connect a 3.5mm audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO
OUT jacks on the cable or satellite box.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
6 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or
T
to select HDMI 1, then press ENTER.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Cable or
satellite box
Component
Analog
video cable audio cable
connectors connectors
Component video
cable
Audio cable
Component
Analog
video jacks audio jacks
Back of TV
To connect a cable or satellite box using component video:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the COMPONENT IN/AV IN Y/VIDEO, PB, and PR video
jacks on the back of your TV and the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
•
The COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN Y/VIDEO jack (used to connect a composite
device).
•
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to select Component/AV, then press ENTER.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Using composite video (good)
Notes
•
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
•
COMPONENT IN/AV IN Y/VIDEO jack.
On your TV
Cable or
satellite box
Composite Analog audio
video cable
connector
cable
connectors
AV cable
Composite
video jack
Analog
audio
jacks
Back of TV
To connect a cable or satellite box using composite video:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the COMPONENT IN/AV IN Y/VIDEO jack and L and R AUDIO jacks on
the back of your TV and to the composite video and audio out jacks on the cable or satellite box.
Notes
•
The COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN Y/VIDEO jack (used to connect a composite
device).
•
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Using coaxial (good)
Side of TV
On your TV
Cable or
satellite box
Coaxial cable
connector
ANT/CABLE IN
Coaxial cable
jack
To connect a cable or satellite box using coaxial:
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on
page 42.
Notes
•
Use a coaxial cable to eliminate interference and noise from radio
waves.
•
Do not bundle the coaxial cable with the power cord or other cables.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Connecting an antenna or cable TV (no box)
Side of TV
On your TV
Antenna or cable TV
(no box)
Coaxial cable
connector
ANT/CABLE IN
Coaxial cable
jack
To connect an antenna or cable TV (no box):
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the antenna or
cable TV wall jack.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to highlight TV, then press ENTER.
6 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on
page 42.
Notes
•
Use a coaxial cable to eliminate interference and noise from radio
waves.
•
•
Do not bundle the coaxial cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service
personnel to correct the problem.
•
•
•
If the signal level for a channel is weak, the picture may be distorted.
Adjust the antenna or use a highly directional outdoor or set-top
antenna with a built-in amplifier.
If the picture quality is good on some channels and poor on others, the
problem may be caused by a poor or weak signal from the broadcaster
or cable TV provider.
If you connect to cable or satellite TV without a set-top box and
experience poor picture quality, you may need to install a set-top box to
improve signal reception and picture quality. Contact your cable or
satellite TV provider about upgrading to a set-top box.
Many high-definition (HD) channels upscale standard-definition (SD)
content. The picture displayed on your TV is still displayed as SD, thus
the picture quality will not be as clear or crisp as it would be if the
content was originally recorded in HD.
•
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see “What connection should I use?” on page 11.
Using HDMI (best)
Side of TV
On your TV
HDMI cable
connector
DVD or Blu-ray player
HDMI jack
HDMI cable
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight HDMI 1 or HDMI 2, then press ENTER.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 1 (DVI+ARC) jack to connect a DVD or Blu-ray
player using DVI. If you use another HDMI jack, you will not hear sound from
the TV speakers.
Side of TV
On your TV
HDMI cable with
HDMI-DVI adapter
HDMI cable 3.5mm audio
connector
cable
connectors
DVD or Blu-ray player
HDMI 1
(DVI+ARC)
jack
DVI AUDIO
IN jack
3.5mm audio cable
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the DVD or Blu-ray player.
3 Connect the other end of the cable to the HDMI 1 (DVI+ARC) jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO
OUT jacks on the DVD or Blu-ray player.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
5 Plug your TV’s power cord into a power outlet, then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or
T
to select HDMI 1, then press ENTER.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
DVD or Blu-ray player
Component Analog audio
video cable
connectors
cable
connectors
Component video cable
Audio cable
Component
Analog
video jacks audio jacks
Back of TV
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the COMPONENT IN/AV IN Y/VIDEO, PB, and PR jacks on
the back of your TV and to the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the L and R AUDIO jacks on the back of your TV and to the
L and R AUDIO OUT jacks on the DVD or Blu-ray player.
Notes
•
The COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN Y/VIDEO jack (used to connect a composite
device).
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
•
4 Plug your TV’s power cord into a power outlet, then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to select Component/AV, then press ENTER.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Using composite video (good)
Notes
•
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
•
COMPONENT IN/AV IN Y/VIDEO jack.
On your TV
DVD or Blu-ray player
Composite
video cable
connector
Analog audio
cable
connectors
AV cable
(composite video cable)
Composite
video jack
Analog
audio jacks
Back of TV
To connect a DVD or Blu-ray player using composite video:
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the COMPONENT IN/AV IN Y/VIDEO jack and L and R AUDIO jacks on
the back of your TV and to the AV OUT jacks on the DVD or Blu-ray player.
Note
•
The COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN Y/VIDEO jack (used to connect a composite
device).
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
•
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Connecting a game console
Using HDMI (best)
Side of TV
On your TV
Game
console
HDMI cable
connector
HDMI jack
HDMI cable
To connect a game console using HDMI:
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the game console.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation
that came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight HDMI 1 or HDMI 2, then press ENTER.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Using component video (better)
Note
Cables are often color-coded to match color-coded jacks.
On your TV
Game
console
Component
video cable
connectors
Analog
audio cable
connectors
Console-specific component
video and audio cable
Component
video jacks
Analog
audio jacks
Back of TV
To connect a game console using component video:
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect the video and audio connectors on the component video cable (not provided) to the
COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks and L and R AUDIO jacks on the back of your TV and to
the component jack(s) on the game console.
Note
•
Your game console may require a special component video cable. See
the documentation that came with your game console or check the
manufacturer’s website.
The COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN Y/VIDEO jack (used to connect a composite
device).
•
•
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation
that came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Using composite video (good)
Notes
•
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
•
COMPONENT IN/AV IN Y/VIDEO jack.
On your TV
Game console
Composite Analog audio
video cable
connector
cable
connectors
Console-specific AV cable
Composite
video jack
Analog
audio jacks
Back of TV
To connect a game console using composite video:
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect the video and audio connectors on the game console’s AV cable (not provided) to the
COMPONENT IN/AV IN Y/VIDEO jack and L and R AUDIO jacks on the back of your TV and to the composite
jack(s) on the game console.
Note
•
Most game consoles come with a special AV (composite video) cable.
See the documentation that came with your game console or check the
manufacturer’s Web site.
The COMPONENT IN/AV IN Y/VIDEO, PB, and PR video jacks (used to
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN Y/VIDEO jack (used to connect a composite
device).
•
•
When you connect the audio using the L and R AUDIO jacks, the audio
output is analog.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation
that came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Connecting a computer
Using HDMI (best)
Side of TV
On your TV
HDMI cable
connector
HDMI jack
HDMI cable
To connect a computer using HDMI:
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT
jack on the computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to highlight HDMI 1 or HDMI 2, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Using DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI 1 (DVI+ARC) jack to connect a computer using DVI.
If you use another HDMI jack, you will not hear sound from the TV speakers.
Side of TV
On your TV
HDMI cable with
HDMI-DVI adapter
HDMI cable
connector
Audio cable
with stereo
mini plug
HDMI 1
(DVI+ARC)
jack
DVI
AUDIO IN
jack
Audio cable with stereo
mini plug
To connect a computer using DVI:
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI 1 (DVI+ARC) jack on the side of your TV.
4 Connect an audio cable with a stereo mini plug (not provided) to the DVI AUDIO IN jack on the side of your TV
and to the AUDIO OUT (headphone) jack on the computer.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
5 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to select HDMI 1, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Connecting a USB flash drive
Side of TV
USB flash drive
To connect a USB flash drive:
1 Plug a USB flash drive into the USB port on the side of your TV.
Caution
Do not remove the USB flash drive or turn off the TV while using the USB
flash drive. You may lose data or damage the USB flash drive.
2 If your TV is turned on when you connect the USB flash drive, press
appears. The PHOTOS menu opens.
S
or
T
to select Yes in the message that
OR
If you switch to a different video input source after you plug in the USB flash drive and want to switch back to
the drive, press INPUT to open the INPUT SOURCE list, press
The PHOTOS menu opens.
S
or
T
to select USB (Photos), then press ENTER.
Note
The Photos viewer only supports JPEG format images (with “.jpg” file
extensions) and not all JPEG files are compatible with your TV.
For more information, see “Using a USB flash drive” on page 59.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Connecting headphones
When you connect headphones, the TV speakers are muted.
Warning
Loud noise can damage your hearing. When using headphones, use the
lowest volume setting on your headphones that still lets you hear the sound.
Side of TV
To connect headphones:
1 Connect the headphones to the /AUDIO OUT jack on the side of your TV.
2 In the screen that opens, press
W
or
X
to highlight Headphone, then press ENTER. For more information, see
“Selecting the audio out mode” on page 41.
Notes
•
If you connect headphones when your TV is turned off, then you turn on
your TV, the TV speakers are muted and the audio plays through the
headphones.
You can also connect an amplifier, home theater system, or sound bar to
the /AUDIO OUT jack. If you want to connect an amplifier, home
theater system, or sound bar, you need to disconnect the headphones.
•
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Connecting a basic home theater system
Using digital audio
Side of TV
On your TV
Digital optical
audio cable
connector
Home theater
system
Digital optical
audio jack
Digital optical
audio cable
To connect a basic home theater system using digital audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your
TV and to the optical AUDIO IN jack on the digital home theater system.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the home theater system.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Using analog audio
When you connect a home theater system to the /AUDIO OUT jack, the TV speakers are muted.
Side of TV
On your TV
Home theater
system
3.5mm audio
cable connector
3.5mm audio
cable
/AUDIO OUT
jack
To connect a home theater system using analog audio:
1 Make sure that your TV’s power cord is unplugged and the home theater system is turned off.
2 Connect a 3.5mm audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the
AUDIO IN jacks on the analog home theater system.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the home theater system.
Notes
•
For information about selecting the audio out mode for a home theater,
see the “Headphone/Audio Out“ option in “Adjusting sound settings”
on page 40.
•
You can connect headphones, an amplifier, a home theater system, or a
sound bar to the /AUDIO OUT jack. If you want to use headphones,
you need to disconnect the amplifier, home theater system, or sound
bar.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Connecting a home theater system with multiple devices
Cable or satellite box
DVD or Blu-ray player
AV receiver
Game console
USB flash drive
Antenna or cable
TV connected
directly to the
wall jack
Computer
The connections you make depend on the video and audio jacks available on your devices. Refer to the
documentation that came with your devices for connection information.
Just remember to use the best connection types available for the best picture and sound. For information about
connection types, see “What connection should I use?” on page 11.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Connecting power
To connect the power:
• Plug the AC power cord into a power outlet.
Caution
•
•
•
Your TV should only be operated from the power source indicated on
the label.
Always unplug the AC power cord from the power outlet when you will
not be using your TV for an extended period of time.
The power cord is permanently attached to your TV. Do not try to
unplug it from the back of your TV.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Cautions
Using the remote control
•
Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Installing remote control batteries
•
To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
•
Notes
•
•
•
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is
depleted.
•
If the remote control is not going to be
used for an extended period of time,
remove the batteries.
Aiming the remote control
To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV. For the location
of the remote sensor, see “Front” on page 7.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
6 Press
S
or
T
to highlight Time Zone, then press
Turning on your TV for the
first time
X
7 Press
S
or
T
to select your time zone. You can
select Eastern, Central, Mountain, Pacific,
Alaska, Hawaii, Atlantic, or Newfoundland,
The first time you turn on your TV, the Setup Wizard
opens. The Setup Wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
then press ENTER, MENU, or
W.
8 Press
S
X
or
T
to highlight Daylight Saving, then
press
to access the setting.
9 Press
S
or
T
to select On (if your viewing area
observes Daylight Saving Time) or Off (if your
To set up your TV:
1 Make sure that you have:
viewing area does not observe Daylight Saving
Time), then press ENTER, MENU, or
10 If you selected Manual for Mode:
W.
• Installed the remote control batteries. (See
page 33 for details.)
• Connected an antenna, cable TV, or satellite
TV. (See page 12 through 17 for details.)
• Connected the power cord. (See page 32 for
details.)
• Press
S
or
T
X
to highlight Year, Month, or Day,
then press
to access the setting. Press
S
or
T
to adjust the setting, then press ENTER.
• Press or to highlight Time, then press
to access the setting. Press or
the hour, minute, or AM/PM field, then press
or to adjust the setting. When you are
finished, press ENTER.
S
T
X
W
X
to highlight
S
2 Press (power) to turn on your TV. The Choose
your Menu Language screen opens.
T
11 When you have finished setting the time, press
ENTER. The What is your viewing environment
screen opens.
3 Press
S
or
T
to highlight the language you
want, then press ENTER. The time setting screen
opens.
12 Press
S
or
T
to highlight Home Use Mode or
Store Display Mode, then press ENTER.
If you selected Store Display Mode, the
message asks if you are sure you want this
mode. Select Yes to continue using Store
Display Mode, or select No to change your
selection, then press ENTER. Store Display
Mode is not an energy savings mode and will
display a retail banner.
The Choose your TV Source screen opens.
4 Press
S
or
T
to highlight Mode, then press
X
to
access the setting.
5 Press or
S
T
to select Manual (to set the date
and time manually) or Auto (to set the date and
time automatically from a TV signal source
based on the time zone you select), then press
ENTER, MENU, or
W.
Note
If you select Auto, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
13 Press
S
or
T
to highlight Antenna, Cable, or
B
If you select Cable, a message asks if you
have a cable box:
Satellite Box, then press ENTER.
A
If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
• Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
C
If you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator turns red.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
• Select HDMI, Component, or AV, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
Selecting the video input source
Note
To select the video input source:
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
14 To watch TV, press INPUT, press
S
or
T
to
highlight the video input source for your TV in
the INPUT SOURCE list, then press ENTER.
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI 1 or HDMI 2.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component/AV.
2 Press
S
or
T
to select a video input source, then
press ENTER.
• If your TV is connected to a cable or satellite
box using a composite video cable, select
Component/AV.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
SETTINGS menu (TV mode)
PHOTOS menu (USB mode)
Navigating the menus
On-screen menu overview
Notes
•
Depending on the signal source
selected, you may see different
options on your screen. The following
menus are shown in TV mode (except
the Photos menu).
•
•
•
Menu items that are not selectable are
grayed out.
Menus in this manual are described in
TV mode, unless otherwise indicated.
The screens shown in this manual are
for explanation purposes and may
vary from the actual screens on your
TV.
PICTURE menu (TV mode)
AUDIO menu (TV mode)
CHANNELS menu (TV mode)
Press MENU to open the on-screen
menu.
Press the right or left arrow to move
the cursor on the screen or to adjust a
selected item.
Press the up or down arrow to select
menu options.
Press ENTER to confirm a selection or
enter a sub-menu.
Press MENU to return to the previous
menu.
Press EXIT to close the menu.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Selecting a channel
Adjusting the picture
To select a channel:
• Press CH
or CH to go to the next or previous
Adjusting the TV picture
channel on the memorized channel list.
You can adjust various settings to improve the
quality of the TV picture. Also, you can reset all
picture settings to the factory default.
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change
the channel.
To adjust the TV picture:
buttons to select the main digital channel, press
(sub-channel), then press the number button
for the sub-channel. Wait for the channel to
change, or press ENTER to immediately change
the channel. For example, to tune to channel 5.1,
press 5, (sub-channel), then 1.
1 Press MENU. The on-screen menu opens with
the PICTURE menu displayed.
Note
Button presses must be within three
seconds of each other.
• Press
(return) to go to the last viewed channel.
• Press FAVORITE to open the favorite channel list,
press
S
or
T
to highlight a channel, then press
ENTER. For information about setting up a
favorite channel list, see “Setting up a favorite
channel list” on page 44.
2 Press
3 Press
T
S
or ENTER to access the menu.
or
T
to highlight an option, then press
Note
ENTER to access the option. You can select:
If a list has more than one page, press
to scroll through the pages.
S
or
• Picture Mode—Selects the picture mode. You
T
can select:
• Vivid—(a bright and vivid picture).
Significantly increases the contrast,
brightness, and sharpness. This selection is
good for video games, animation, and in
bright light environments.
• Standard—(a standard picture).
Moderately increases the contrast,
brightness, and sharpness. This selection is
good for standard TV broadcasts.
• Energy Savings—(the backlight
brightness is decreased). Your TV has a
backlight that provides light for displaying
a picture. By reducing the amount of light,
your TV uses less energy.
• Movie—(a finely detailed picture). Adjusts
the brightness and contrast and lowers the
sharpness for a more realistic picture. This
selection is good for watching the highest
quality video such as Blu-ray Discs, DVDs,
and HDTV.
Adjusting the volume
To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on.
Viewing channel information
To view channel information:
• Press INFO* to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal
type, audio information, resolution, CC mode,
current time, signal strength, day of the week,
date, and current program start and end times,
if provided by the broadcaster.
• Analog channel information—Displays
channel number, channel label (if present),
signal type, audio information, day of the
week, date, and resolution, if provided by the
broadcaster.
• Custom—(customized picture). Lets you
manually adjust picture settings such as
brightness, contrast, and sharpness.
Note
You can also press PICTURE to select the
picture mode.
• Backlight—Sets the overall brilliance of the
screen.
• Brightness—Adjusts the brightness of the
dark areas of the picture.
• Contrast—Adjusts the brightness of the light
areas of the picture.
• Color—Adjusts the color intensity of the
picture. A low setting may make the color look
faded. A high setting may make the color look
artificial.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
• Tint—Adjusts the color balance of the picture.
Use this control to make skin tones look more
natural.
• Overscan—Extends text and images past
the screen edges to hide edge artifacts.
You can select On or Off.
• Sharpness—Adjusts the color detail of
images. If you set this control too high, dark
images may appear with light or white edges.
• Advanced Video—Opens the
PICTURE · ADVANCED VIDEO menu where you
can adjust additional video options.
• Dynamic Backlight (DCR)—Enhances the
contrast ratio between light and dark areas
of the picture. You can select Off, Low, or
High.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Off, Low, Middle, or
High.
• Adaptive Contrast—Automatically
adjusts picture detail and brightness. You
can select On or Off.
• Reset Picture Settings—Resets all picture
settings to factory mode.
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
• Aspect Ratio—Adjusts how the picture
fills the screen. You can select:
Aspect ratio options
Example
Normal:
Displays the image in the
original aspect ratio. Black
bars appear if the image is
not in the widescreen
(16:9) aspect ratio.
Zoom:
Expands the image to fill
the screen. The top and
bottom of the image may
be cropped.
Wide:
Use this option to view
content recorded in a 16:9
(wide-screen) aspect ratio.
Cinema:
Stretches the image at the
edges, but keeps a clear
image in the center.
Auto:
Automatically adjusts the
image based on the screen
size and the TV program.
Note: Auto is only
available when Auto
Aspect Ratio in the
CHANNELS menu is set
to On.
Note
You can also press ASPECT to select the
aspect ratio.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Setting the power on picture mode
Adjusting the sound
You can set the picture mode your TV uses when
you turn it on.
Adjusting sound settings
To set the power on picture mode:
1 Press MENU. The on-screen menu opens.
You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight AUDIO, then press
T
or
ENTER. The AUDIO menu opens.
3 Press
S
or
T
to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
3 Press
S
or
T
to highlight an option, then press
ENTER to access the option. You can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Music—Preserves the original sound. This
setting is good for listening to music.
4 Press
S
or
T
to highlight Power on in Vivid
Mode, then press ENTER.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Custom—Lets you manually adjust sound
settings.
5 Press or
S
T
to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off),
then press ENTER.
• Balance—Adjusts the balance between the
left and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
• TV Speakers—Selects where to play TV audio.
You can select On (default setting) to play
audio through the TV speakers or Off to play
audio through the speakers on an external
audio system.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select:
• PCM (to output audio in 2-channel stereo).
• RAW (to pass through the original digital
audio sound).
• Audio Delay—Fine tunes the audio when
it is not in sync with the video.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
• MTS/SAP—(Analog channels only) Selects the
Selecting the audio out mode
audio mode. You can select:
If your TV is on when you connect a device into the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
• Mono—Select this option if there is
noise or static on weak stereo
broadcasts.
• Stereo—Select this option for
programs broadcast in stereo.
To select the audio out mode:
• SAP—Select this option to listen to a
1 Connect headphones, an amplifier, a home
theater system, or a sound bar to the /AUDIO
OUT jack on the side of your TV. The following
screen opens.
secondary audio program, if available.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if
available.
• Headphone/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, an amplifier, a home
theater system, or a sound bar. When a device
is connected to the /AUDIO OUT jack, the
TV speakers are muted. This option selects
where the audio is played. You can select:
2 Press
W
or
X
to highlight the audio out mode
you want to use, then press ENTER. You can
select:
• Headphone—Select this option if you
connected headphones.
• Headphone—Select this option if you
connected headphones.
• Audio Out Fixed—Select this option to
use the remote control that came with the
amplifier, home theater system, or sound
bar you connected to the /AUDIO OUT
jack to control the audio.
• Audio Out Variable—Select this option to
use the remote control that came with
your TV to control the audio from the
amplifier, home theater system, or sound
bar you connected to the /AUDIO OUT
jack.
• Audio Out Fixed—Select this option to use
the remote control that came with the
amplifier, home theater system, or sound bar
you connected to the /AUDIO OUT jack to
control the audio.
• Audio Out Variable—Select this option to
use the remote control that came with your TV
to control the audio from the amplifier, home
theater system, or sound bar you connected to
the /AUDIO OUT jack.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
To automatically scan for channels:
1 Press MENU. The on-screen menu opens.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Auto Channel Search,
then press ENTER. The CHANNELS · AUTO
CHANNEL SEARCH screen opens.
3 Press
S
or
T
to highlight Audio Only, then
to select On.
press ENTER.
4 Press or
S
T
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Notes
•
The picture turns off in about five
seconds.
•
Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.
4 Press
S
or
T
to highlight Antenna, Cable, or
•
Satellite Box, then press ENTER.
A
If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH
or CH , your TV goes to the next or
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
B
If you select Cable, a message asks if you
have a cable box:
C
If you select Satellite Box, a message asks
how you connected the satellite box to your
TV:
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV:
• Select HDMI, Component, or AV, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
• Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Hiding channels
Setting up a favorite channel list
You can hide channels in the channel list. When you
You can create a favorite channel list so you can
quickly browse through your favorite channels by
pressing FAVORITE, then selecting a channel from
the favorite channel list.
press CH
or CH , your TV skips the hidden
channels. You can still tune to a hidden channel by
pressing the number buttons for the channel.
To hide channels:
1 Press MENU. The on-screen menu opens.
To set up a favorite channel list:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Add/Skip Channels,
3 Press
S
or
T
to highlight Favorites, then press
then press ENTER. The CHANNELS · ADD/SKIP
CHANNELS screen opens.
ENTER. The CHANNELS · FAVORITES screen
opens.
4 Press S T W or
X
to highlight the channel you
4 Press S T W or
X
to highlight the channel you
want to hide, then press ENTER. The check mark
want to add to the favorites list, then press
ENTER. A check mark appears next to the
channel.
disappears.
Notes
Notes
•
•
•
If you highlight a channel in the list for
two to four seconds, your TV displays
the channel in the background.
A channel with a check mark is not
hidden. A channel with no check mark
is hidden.
•
If you highlight a channel in the list for
two to four seconds, your TV displays
the channel in the background.
To remove a channel from the
favorites list, highlight the channel,
then press ENTER. The check mark
disappears and the channel is
removed from the list.
•
If the list has more than one page,
press
S
or
T
to scroll through the
pages.
•
If the list has more than one page,
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
press
S
or
T
to scroll through the
pages.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Viewing a favorite channel
To view a favorite channel:
1 Press FAVORITE. The favorite channel list opens.
2 Press
S
or
T
to highlight a channel, then press
ENTER.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Adding or changing a channel label
Checking the digital signal strength
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
To add or change a channel label:
1 Press MENU. The on-screen menu opens.
To check the digital signal strength:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Channel Labels, then
press ENTER. The CHANNELS · CHANNEL LABELS
screen opens with the channel number field
highlighted.
3 Press
S
or
T
to highlight Channel Strength,
then press ENTER. The Channel Strength screen
opens showing the signal strength meter.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to select the channel you want to
label, then press
field.
X
to move to the channel label
5 Press
or
S
or
T
to select a character, then press
W
X
to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11
characters.
6 When you have completed the label, press
ENTER.
7 Press EXIT to close the menu.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
3 Press
S
or
T
to highlight Parental Controls,
Automatically adjusting the aspect ratio
then press ENTER. The Enter password screen
Auto Aspect Ratio automatically changes how the
picture looks on the screen (aspect ratio) based on
the TV program you are viewing.
opens.
To automatically adjust the aspect ratio:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
4 Press the number buttons to enter the four-digit
password. The default password is 0000. You
should change the password to a number you
can remember. The SETTINGS · PARENTAL
CONTROLS menu opens.
3 Press
S
or
T
to highlight Auto Aspect Ratio,
then press ENTER.
4 Press or
S
T
to select On (automatically adjust
the aspect ratio) or Off (does not automatically
adjust the aspect ratio), then press ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Setting parental controls
Setting or changing the password
5 Press
S
or
T
to highlight Change Password,
then press ENTER. The SETTINGS · PARENTAL
CONTROLS · CHANGE PASSWORD screen opens.
Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program
(with some exceptions, such as news and sports)
and deny access to programs that exceed the
ratings level you select. To watch programs that
exceed the selected rating, you must enter a
password.
To set or change the password:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
6 Press the number buttons to enter a password,
then enter the password again. A message tells
you that the password has been changed.
Note
If you forget your password, enter 9999.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Locking control buttons
Blocking unrated TV
When the button lock is turned On, the buttons on
the side of your TV are locked, and you can only
operate your TV using the remote control.
Some TV programs, such as news and sports shows
are not rated. When Block Unrated TV is turned on,
TV programs that do not have ratings are blocked.
When you try to watch a blocked program, you are
prompted to enter the parental controls password.
To lock control buttons:
1 Press MENU. The on-screen menu opens.
To block unrated TV:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
5 Press
S
or
T
to highlight Button Lock, then
to select On (locks the buttons) or
press ENTER.
5 Press
S
or
T
to highlight Block Unrated TV,
6 Press
S
or
T
then press ENTER.
Off (unlocks the buttons).
6 Press
S
or
T
to select On (to block unrated TV)
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
or Off (to unblock unrated TV).
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
To set parental control levels:
1 Press MENU. The on-screen menu opens.
Setting parental control levels
You can set parental controls for the U.S. and
Canada.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
U.S. rating levels
U.S. TV ratings
NONE
TV-Y
Not rated
All children
TV-Y7
TV-G
Suitable for children 7 and older
General audiences
TV-PG
TV-14
TV-MA
Parental guidance suggested
Parental guidance strongly suggested
Mature audiences only
3 Press
S
or
T
to highlight Parental Controls,
Some of the age-based TV Parental Guidelines
ratings also have content-based ratings.
then press ENTER. The Enter password screen
opens.
U.S. TV content ratings
All
FV
L
S
V
All ratings are blocked
Fantasy violence
Strong language
Sexual situations
Violence
D
Suggestive dialog
U.S. movie (MPAA) ratings
None
G
PG
PG-13
R
Movie not rated
General audiences
Parental guidance suggested
Suitable for children 13 and older
Parental guidance suggested for children
under 17
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
NC-17
X
Not suitable for children under 17
Adults only
Canadian rating levels
Canadian English ratings
E
Exempt programming
C
C8+
G
Suitable for all children
Suitable for children 8 and older
General audiences
PG
14+
18+
Parental guidance suggested
Suitable for children 14 and older
Adult only
Canadian French ratings
E
Exempt programming
G
General audiences
8ans+
13ans+
16ans+
18ans+
Suitable for children 8 and older
Suitable for children 13 and older
Suitable for children 16 and older
Adult only
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
5 Press
S
or
T
to highlight USA Parental Locks,
Downloading rating information
then press ENTER. (To set Canadian ratings,
select Canadian Parental Locks.)
If the program you are viewing has downloadable
rating information, you can download the
USA Parental Locks
information to use when setting parental controls.
Note
If the program you are viewing does not
have RRT5 rating information, RRT5 is
grayed on the SETTINGS · PARENTAL
CONTROLS menu and cannot be selected.
To download rating information:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
Canadian Parental Locks
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
6 Press
W
or
X
to highlight:
• Movie Ratings or TV Ratings for USA ratings.
• Canadian English or Canadian French for
Canadian ratings.
7 Press
S
or
T
to select the rating. If a rating has
sub-ratings, press
sub-rating.
W
or
X
to highlight a
Note
When you block a rating, that rating and
all higher ratings are blocked.
8 Press ENTER to confirm. A lock symbol appears
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
when a rating is blocked.
9 Press MENU to return to the previous menu, or
press EXIT to close the menu.
5 Press
S
or
T
to highlight RRT5, then press
ENTER. The SETTINGS · PARENTAL
CONTROLS · RRT5 screen opens. The screen that
opens may vary depending on the broadcaster.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
6 Press S T W or
X
to select the program and
Using closed captioning
content types you want to block, then press
ENTER. The SETTINGS · PARENTAL CONTROLS
menu opens.
Closed captioning displays a text version of the TV
program audio or displays information provided by
the broadcaster.
Turning closed captioning on or off
To turn closed captioning on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
7 To reset the RRT5 information to the factory
default, press
S
or
T
to highlight Reset RRT5,
then press ENTER. A box opens.
8 Press or to highlight Yes or No, then press
ENTER.
S
T
9 Press MENU to return to the previous menu, or
press EXIT to close the menu.
3 Press
S
or
T
to highlight Closed Caption, then
press ENTER. The SETTINGS · CLOSED CAPTION
menu opens.
4 Press
S
or
T
to highlight Caption Control, then
press ENTER. A menu opens.
5 Press or
S
T
to select CC Off (turns off closed
captioning), CC On (turns on closed captioning),
or CC on when mute (turns on closed
captioning when the sound is muted).
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press CCD to turn closed
captioning on or off.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Selecting the analog closed captioning mode
Selecting the digital closed captioning mode
Analog channels usually have one or more closed
captioning modes. The CC1 mode usually displays a
text version of the TV program audio in a small
banner. The other CC modes display information
provided by the broadcaster. The Text modes
display information in a box that covers half of the
screen.
Digital channels usually have one or more closed
captioning modes. The CC1 mode usually displays a
text version of the TV program audio in a small
banner. The other CC modes display information
provided by the broadcaster. CS1 mode displays a
text version of the audio in the same language as
the audio.
To select the analog closed captioning mode:
1 Press MENU. The on-screen menu opens.
To select the digital closed captioning mode:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Closed Caption, then
3 Press
S
or
T
to highlight Closed Caption, then
press ENTER. The SETTINGS · CLOSED CAPTION
press ENTER. The SETTINGS · CLOSED CAPTION
menu opens.
menu opens.
4 Press
S
or
T
to highlight Analog Caption, then
4 Press
S
or
T
to highlight Digital Caption, then
press ENTER. A menu opens.
press ENTER. A menu opens.
5 Press
S
or
T
to select an analog caption setting.
5 Press
S
or
T
to select a digital caption setting.
You can select:
You can select:
• CC1 through CC4—Closed captioning
appears in a small banner across the bottom
of the screen. CC1 is usually the “printed”
version of the audio. CC2 through CC4 display
content provided by the broadcaster.
• Text1 through Text4—Closed captioning
covers half or all of the screen. Text1 through
Text4 display content provided by the
broadcaster.
• CS1 through CS6—CS1 is usually the “printed”
version of the audio. CS2 through CS6 display
content provided by the broadcaster. You can
change the way digital closed captioning is
displayed on the screen. For more information,
see “Customizing digital closed captioning
settings” on page 52.
• CC1 through CC4—Closed captioning
appears in a small banner across the bottom
of the screen. CC1 is usually the “printed”
version of the audio. CC2 through CC4 display
content provided by the broadcaster.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
4 Press
S
or
T
to highlight Digital CC Settings,
Customizing digital closed captioning
settings
then press ENTER. The SETTINGS · CLOSED
CAPTION · DIGITAL CC SETTINGS menu opens
with Style highlighted.
To customize digital closed captioning styles:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
5 Press ENTER, then press
Custom.
S
or
T
to select
6 Press
S
or
T
to highlight an option, then press
ENTER. You can select:
3 Press
S
or
T
to highlight Closed Caption, then
press ENTER. The SETTINGS · CLOSED CAPTION
• Size—Selects the font size.
• Font—Selects the font style.
menu opens.
• Text Color—Selects the color for the words.
• Text Opacity—Selects the opacity level for
the words.
• Background Color—Selects the color for the
background.
• Background Opacity—Selects the opacity
level for the background.
• Edge Effect—Selects the style of the window
edge.
• Edge Color—Selects the color of the window
edge.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
5 Press
S
or
T
to highlight Mode, then press
Adjusting time settings
ENTER. A menu opens.
6 Press or
S
T
to highlight Manual (to set the
When you set up your TV for the first time, the clock
was set up. If you move your TV to a different time
zone, you need to reset the clock to the correct
time.
options manually) or Auto (the options are
automatically set by the TV signal source), then
press ENTER.
7 Press
S
or
T
to highlight Time Zone, then press
ENTER. A menu opens.
Setting the clock
8 Press or
S
T
to select your time zone, then press
To set the clock:
1 Press MENU. The on-screen menu opens.
ENTER. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland, then press ENTER.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
9 If your viewing area observes Daylight Saving
Time, press
S
or
T
to highlight Daylight
Saving, then press ENTER.
10 Press
S
or
T
to select On or Off, then press
ENTER to close the menu.
11 If you selected Manual for Mode:
• Press
S
or
T
X
to highlight Year, Month, or Day,
to access the setting. Press or
then press
S
T
to adjust the setting, then press ENTER.
• Press or to highlight Time, then press
access the setting. Press or to highlight
the hour, minute, or AM/PM field, then press
or to adjust the setting. When you are
finished, press ENTER.
S
T
X
to
W
X
S
T
3 Press
S
or
T
to highlight Time, then press
12 Press MENU to return to the previous menu, or
ENTER. The SETTINGS · TIME menu opens.
press EXIT to close the menu.
4 Press
S
or
T
to highlight Date/Time, then press
ENTER. The SETTINGS · TIME · DATE/TIME menu
opens.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Setting the sleep timer
Adjusting menu settings
You can specify the amount of time before your TV
automatically turns off.
Selecting the menu language
To set the sleep timer:
1 Press MENU. The on-screen menu opens.
Your TV can display the on-screen menu in English,
French, or Spanish. When you set your TV up for the
first time, the language was selected. You can
change the menu language to a different language.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
To select the menu language:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
p
3 Press
S
or
T
to highlight Time, then press
ENTER. The SETTINGS · TIME menu opens.
3 Press
S
or
T
to highlight Menu Language, then
press ENTER. A menu opens.
4 Press
S
or
T
to highlight a language, then press
ENTER. You can select English, Français, or
Español.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to highlight Sleep Timer, then
press ENTER. A menu opens.
5 Press or
S
T
to select the amount of time before
your TV turns off automatically. You can select
Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240
minutes.
To turn off the sleep timer, select Off.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press SLEEP to set the sleep
timer.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Labeling an input source
Turning Input Sensor on or off
You can add a label to an input source to make it
easier to identify.
When the Input Sensor feature is turned on, your TV
automatically detects which video jacks have
devices connected to them. Your TV uses this
information to determine what options you can
select on the INPUT SOURCE list when you press
INPUT.
To label an input source:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
To turn Input Sensor on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Input Labels, then
press ENTER. The SETTINGS · INPUT LABELS
screen opens with the input source field
highlighted.
3 Press
S
or
T
to highlight Auto Input Sensing,
then press ENTER. A menu opens.
4 Press
S
or
T
to select On (turns on the input
sensor) or Off (turns off the input sensor).
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to select the input source you want
to move to the label field.
to label, then press
X
5 Press
S
or
T
to select a character, then press
W
or to move to the previous or next character
X
position. Repeat this step to enter additional
characters.
6 When you have completed the label, press
ENTER.
7 Press MENU to return to save your label and
return to the previous menu. The next time you
press INPUT, your label will appear in the INPUT
SOURCE list.
8 Press EXIT to close the menu.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Turning Device Auto Power Off on or off
Using INlink
When INlink is set to On, Device Auto Power Off
automatically turns off HDMI CEC devices when you
turn off your TV.
INlink lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use INlink, you must set the INlink Control setting
on the SETTINGS · INLINK menu to On.
To turn Device Auto Power Off on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
Note
T
or ENTER. The SETTINGS menu opens.
•
•
•
HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
The connected device’s HDMI CEC feature
must be turned on.
If you connect an HDMI device that is not
HDMI CEC-compatible, all the INlink
Control features do not work.
•
Depending on the connected HDMI
device, the INlink Control feature may
not work.
Turning INlink on or off
To turn INlink on or off:
1 Press MENU. The on-screen menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
4 Press
S
or
T
to highlight Device Auto Power
Off, then press ENTER.
3 Press
S
or
T
to highlight INlink, then press
5 Press or
S
T
to highlight On (turns off the
ENTER. The SETTINGS · INLINK menu opens.
connected devices when you turn off your TV)
or Off (does not turn off the connected devices
when you turn off your TV), then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to highlight INlink Control, then
to highlight On or Off, then press
press ENTER.
5 Press or
S
T
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Turning TV Auto Power On on or off
Turning Audio Receiver on or off
TV Auto Power On automatically turns on your TV
when an HDMI CEC device is turned on, if the
device has this feature.
When INlink is turned on and you have connected
an audio receiver to your TV, turning on Audio
Receiver lets you use your TV’s remote control to
control the volume on the audio receiver.
To turn TV Auto Power On on or off:
1 Press MENU. The on-screen menu opens.
To turn Audio Receiver on or off:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S
or
T
to highlight TV Auto Power On,
then press ENTER.
4 Press
S
or
T
to highlight Audio Receiver, then
to highlight On (your TV’s remote
press ENTER.
5 Press or
S
T
to highlight On (turns on your TV
when you turn on the connected device) or Off
(does not turn on your TV when you turn on the
connected device), then press ENTER.
5 Press or
S
T
control controls the connected audio receiver’s
volume) or Off (your TV’s remote control does
not control the connected audio receiver’s
volume), then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Displaying a list of INlink-compatible
(HDMI CEC) devices
Waking INlink-compatible (HDMI CEC)
devices
You can display a list of HDMI CEC devices that are
connected to your TV.
When a connected INlink-compatible device is
turned off (in standby mode), Connect wakes (turns
on) the device.
To display a list of INlink-compatible (HDMI CEC)
devices:
To wake INlink-compatible (HDMI CEC) devices:
1 Press MENU. The on-screen menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight INlink, then press
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S
or
T
to highlight INlink Device Lists,
4 Press
S
or
T
to highlight Connect, then press
then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
ENTER. A list of HDMI CEC-compatible devices
you have connected opens.
5 Press
S
or
T
to highlight the device you want to
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
connect to, then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Opening an INlink-compatible device’s root
menu
Using a USB flash drive
You can open an INlink-compatible device’s root
menu, then use your TV’s remote control to control
the device, if the device has this feature.
You can connect a USB flash drive to your TV to
view compatible JPEG pictures.
Notes
To open an INlink-compatible device’s root
menu:
1 Press MENU. The on-screen menu opens.
•
•
Never remove the USB flash drive or
turn off your TV while viewing JPEG
pictures.
The JPEG picture viewer only supports
JPEG format images (with “.jpg” file
extensions) and not all JPEG files are
compatible with your TV.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
Switching to USB mode
To switch to USB mode:
1 Make sure that you have connected the USB
flash drive to the USB port on your TV.
2 If your TV is turned on when you connect the
USB flash drive, press
S
or
T
to highlight Yes in
the message that appears, then press ENTER.
The PHOTOS menu opens.
OR
3 Press
S
or
T
to highlight INlink, then press
If you connected the USB flash drive, then
ENTER. The SETTINGS · INLINK menu opens.
changed to a different video input source, press
INPUT to open the INPUT SOURCE list, press
S
or
T
to highlight USB (Photos), then press ENTER.
The PHOTOS menu opens.
Note
To exit USB mode, press INPUT to open
the INPUT SOURCE list, then select another
input source.
4 Press
S
or
T
to highlight Root Menu, then press
ENTER. The device’s root menu opens, and you
can use your TV’s remote control to control the
device.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
When a photo is displayed full-screen, a control
bar appears at the bottom of the photo. The file
name, picture resolution, size, and date are
displayed on the bottom of the control bar. If
you do not press a button within 10 seconds,
the control bar closes. Press any button to open
the control bar again.
Browsing photos
To browse photos:
1 Switch to USB mode. See “Switching to USB
mode” on page 59. The PHOTOS menu opens.
2 Press
S
or
T
to highlight Browse Photos, then
press ENTER. The screen displays folder names
and photo files stored on the USB flash drive in a
thumbnail index with the first photo or folder
highlighted. A control bar appears at the
bottom of the screen.
4 To navigate on the photo screen, press:
•
•
W
to go to the previous photo.
to go to the next photo.
X
• ENTER to rotate the photo clockwise.
Note
• ASPECT one or more times to enlarge the
image by ×1, ×2, or ×4 or to select Fill (to fill
Photos are shown in the order they appear
on the USB flash drive. They may not be
listed in file name order.
the screen). You can press S T W or
the photo.
X
to pan
• EXIT to return to the thumbnail index.
• MENU to return to the PHOTOS menu.
3 To navigate the thumbnail index screen, press:
•
S T W or
folders.
X
to browse through the files and
• ENTER to view a highlighted photo full-screen
or open a highlighted folder.
• MENU to open the PHOTOS menu.
• FAVORITE to add or remove a photo from the
favorite photo list. A heart appears on a photo
that has been added to the favorite photo list.
• Press EXIT to close the control bar.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Viewing favorite photos
Viewing photos in a slideshow
After you created your favorite photo list, you can
browse among your favorite photos quickly.
You can view your photos in a slideshow.
To view photos in a slideshow:
To view favorite photos:
1 Switch to USB mode. See “Switching to USB
1 Switch to USB mode. See “Switching to USB
mode” on page 59. The PHOTOS menu opens.
mode” on page 59. The PHOTOS menu opens.
2 If the photos you want to view are in a folder on
the USB flash drive, select the folder. For
information about selecting a folder, see
“Browsing photos” on page 60 or “Viewing
favorite photos” on page 61.
3 Press MENU. The PHOTOS menu opens again.
2 Press
S
or
T
to highlight Favorite Photos, then
press ENTER. A thumbnail index of your favorite
photos opens with a control bar at the bottom
of the screen. A heart appears on a favorite
photo.
Note
4 Press
S
or
T
to highlight View Slideshow, then
press ENTER. A slideshow starts with the first
Photos are shown in the order they appear
on the USB flash drive. They may not be
listed in file name order.
photo in the current folder.
5 To control the slideshow, press:
• EXIT to exit the slideshow and return to the
thumbnail index.
• MENU to go to the PHOTOS menu.
You select photos and navigate on the photo
screen in the same way you do when you are
browsing through photos. For more
information, see “Browsing photos” on page 60.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Customizing slideshow settings
Maintaining
You can customize the slideshow settings,
including Repeat, Shuffle, Speed, and Transition.
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
To customize slideshow settings:
1 Switch to USB mode. See “Switching to USB
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
mode” on page 59. The PHOTOS menu opens.
• Working temperatures are 41° to 104°F
(5° to 40°C).
• Do not place your TV in direct sunlight or near a
heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.
Cleaning the TV screen
2 Press
S
or
T
to highlight Settings, then press
ENTER. The PHOTOS · SETTINGS menu opens.
Clean the screen with a soft, lint-free cloth.
3 Press
S
or
T
to highlight an option, then press
ENTER. You can select:
• Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
• Shuffle—Displays the slideshow photos in
random order. You can select On or Off.
• Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 4 Sec, 6 Sec, or
8 Sec.
• Transition—Selects the way photos transition
when moving to the next file in the slideshow.
You can select:
• None—No transition effect.
• Fade to Black—Fades the screen to black
between photos.
• Vertical Wipe—Wipes the screen from top
to bottom between photos.
• Horizontal Wipe—Wipes the screen from
left to right between photos.
• Random—Randomly selects a transition
effect.
4 Press EXIT to close the menu.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Viewing system information
Troubleshooting
You may need to view system information during
troubleshooting.
Warning
To view system information:
1 Press MENU. The on-screen menu opens.
Do not try to repair your TV yourself.
Contact authorized service personnel.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
Restoring settings to the defaults
When you restore default settings, all the settings
you have customized (including parental controls)
are reset.
To restore settings to the defaults:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight System Info, then
press ENTER. Information about the TV software
version is displayed.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
3 Press
S
or
T
to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
4 Press
S
or
T
to highlight Reset to Default, then
press ENTER. A message asks if you want to
reset all TV settings to the default settings.
5 Press
S
or
T
to select Yes (to reset) or No (to not
reset), then press ENTER.
If you select Yes, your TV turns off, then turns on
again. The TV SETUP wizard opens.
6 Go through the TV SETUP wizard. For more
information, see “Turning on your TV for the first
time” on page 34.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Video and audio
Problem
Solution
Dark, poor, or no
picture (screen is
lit), but sound is
good.
Problem
Solution
•
•
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)”
on page 17.
Picture does not
fill the screen.
There are black
bars around the
picture.
•
Change the aspect ratio. An
increasing amount of digital TV
and movies are presented in
wide screen (16:9). See the
“Aspect Ratio option in
“Adjusting the TV picture” on
page 38.
•
•
Adjust the brightness. See
“Adjusting the TV picture” on
page 38.
No picture (screen
is not lit) and no
sound.
•
•
Press on the TV or the
remote control.
Make sure that the Audio Only
option is set to Off. See “Playing
TV audio only” on page 42.
Make sure that the video cables
are connected securely to your
TV.
Make sure that the correct
picture mode is selected. See
“Adjusting the TV picture” on
page 38.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Checking the digital signal
strength” on page 45.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
•
•
•
•
•
Adjust the contrast and
TV picture” on page 38.
Make sure that the power cord
is plugged in.
Make sure that the correct
video input source is selected.
See “Selecting the video input
source” on page 36.
•
•
•
•
•
Try another channel. The station
may be experiencing problems.
Make sure that the incoming
signal is compatible.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)”
on page 17.
Check the closed caption
settings. Some TEXT modes can
block the screen.
•
•
The video cable(s) you are using
may be bad. Try a new set.
Try another channel. The station
may be experiencing problems.
No color, dark
picture, or color is
not correct.
•
•
Try another channel. The station
may be experiencing problems.
Adjust the color settings. See
page 38.
Make sure that the video cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)”
on page 17.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Checking the digital signal
strength” on page 45.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
•
•
•
•
•
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Problem
Solution
Problem
Solution
Only snow (noise)
appears on the
screen.
Dotted lines or
stripes appear on
the screen.
•
•
Try another channel. The station
•
Make sure that the antenna or
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)”
on page 17.
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)”
on page 17.
•
•
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Checking the digital signal
strength” on page 45.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
•
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Checking the digital signal
strength” on page 45.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Picture quality is
good on some
channels and poor
on others. Sound
is good.
•
•
The problem may be caused by
a poor or weak signal from the
broadcaster or cable TV
provider.
If you connect to cable or
satellite TV without a set-top
box and experience poor
picture quality, you may need
to install a set-top box to
improve signal reception and
picture quality. Contact your
cable or satellite TV provider
about upgrading to a set-top
box.
•
•
Double images.
•
•
Use a highly directional outdoor
antenna, cable TV, or satellite
TV.
The picture has a
few bright or dark
spots.
A few bright or dark spots on an
LCD screen is normal. It does
not affect the operation of
your TV.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Problem
Solution
Problem
Solution
Good picture, but
no sound.
•
•
Increase the volume.
Do not display a still image,
such as a logo, game, or
Make sure that the sound is not
muted.
computer image, for an
•
Make sure that you do not have
headphones connected. When
headphones are connected, no
sound comes from the TV
speakers.
Make sure that the correct
audio mode is selected.
Make sure that the audio cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on
page 12 or “Connecting an
antenna or cable TV (no box)”
on page 17.
extended period of time. This
can cause a permanent
after-image to be burned into
the screen. This type of damage
is not covered by your warranty.
•
•
Remote control
Problem
Solution
•
Remote control
does not work.
•
Make sure that the power cord is
correctly connected to your TV
and a power outlet.
•
Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
Point the remote control directly
at the remote control sensor on
your TV. For the location of the
remote control sensor, see “Front”
on page 7.
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Checking the digital signal
strength” on page 45.
•
•
•
•
•
The supplied batteries are
wrapped tightly in clear plastic.
Make sure that you have removed
this plastic from the batteries.
Make sure that the batteries are
installed correctly. See “Installing
remote control batteries” on
page 33.
•
•
The audio cable(s) you are using
may be bad. Try a new set.
Poor picture.
Make sure that the room is not
too bright. Light reflecting off
the screen can make the picture
difficult to see.
If an S-VHS camera or a
camcorder is connected while
another connected device is
turned on, the picture may be
poor. Turn off one or more
devices.
•
Replace dead batteries with new
batteries. See “Installing remote
control batteries” on page 33.
Trouble
See instructions and a table of
common codes in “Programming
universal remote controls” on
page 71.
Codes are subject to change. For
up-to-date codes, go to
Replace dead batteries with new
batteries. See “Installing remote
control batteries” on page 33.
Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
programming
your existing
universal
Good sound, but
poor color.
•
•
Adjust the contrast, color, and
brightness settings. See
“Adjusting the TV picture” on
page 38.
•
•
•
Audio noise.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
No output from
one of the
speakers.
•
•
Adjust the audio balance. See
“Adjusting sound settings” on
page 40.
Make sure that the audio cables
are connected correctly and
securely to your TV.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
General
Problem
Solution
One or more
channels do not
display.
Problem
Solution
•
Make sure that the channels are
not blocked. See “Setting
parental control levels” on
page 48.
No power.
•
•
•
Make sure that the power cord
is correctly connected to your
TV and a power outlet.
•
Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See “Hiding channels” on
page 44.
If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Checking the digital signal
strength” on page 45.
Unplug the power cord, wait 60
seconds, then plug the cord
back in and turn on your TV.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
•
•
•
“No signal”
error message is
displayed.
•
•
•
Press INPUT and make sure that
you have selected the correct
input for the device or service
you are trying to use.
If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
Password is lost.
•
Enter 9999 to access parental
controls, then set a new
password. See “Setting or
changing the password” on
page 46.
After Auto
Some settings
cannot be
•
Reception can vary by channel
depending on the broadcast
power level of a given station.
Contact your cable or satellite
TV provider.
•
•
If a setting is grayed, the setting
is not available in the current
video input mode.
ChannelSearch,
there are no
channels.
accessed.
TV cabinet
creaks.
When the TV is in use, the
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
•
•
Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
Control buttons
do not work.
•
•
•
•
Make sure that the Button Lock
option is set to Off. See
page 47.
Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps
turning off.
Make sure that the sleep timer
is not turned on. See “Setting
the sleep timer” on page 54.
A retail banner
is displayed.
You selected “Retail Mode”
when you ran the TV setup
wizard. Reset your TV to the
factory defaults, then select
Home Use Mode on the What is
your viewing environment
screen. See “Restoring settings
to the defaults” on page 63.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
INlink (CEC-compatible) device
Solution
My TV’s remote
control does
device.
Problem
Solution
•
Make sure that there are no
obstructions between the
remote control and the remote
control sensors on your TV and
the device.
My TV is not
displaying the
video from the
connected CEC
device.
•
•
•
Make sure that the HDMI cable
is connected securely to your
TV and the device.
Make sure that the device is
connected to your TV with an
HDMI cable.
•
•
If the device is not an Insignia
device, all the buttons may not
work.
Make sure that the INlink
feature is turned on. See
page 56.
Make sure that the device is a
CEC device. See the
documentation that came with
the device for more
information.
•
•
•
If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the TV
Speakers option on the Audio
menu is set to On. See
•
•
Make sure that the correct
video input source is selected.
See “Selecting the video input
source” on page 36.
Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 56.
“Adjusting sound settings” on
page 40.
If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the
Audio Receiver option on the
INlink menu is set to On. See
“Turning Audio Receiver on or
off” on page 57.
•
•
Try adjusting the TV picture. See
“Adjusting the TV picture” on
page 38.
If the device is not an Insignia
device, it may not be
compatible with your TV.
My TV is not
playing the
audio from the
connected CEC
device.
•
•
•
Make sure that the HDMI cable
is connected securely to your
TV and the device.
The device may not support this
feature. See the documentation
that came with the device for
more information.
Make sure that the device is
connected to your TV with an
HDMI cable.
The device does
not show up in
the INlink
•
•
Make sure that the device is
turned on.
Make sure that the device is a
CEC device. See the
documentation that came with
the device.
Make sure that the TV volume is
turned up and not muted.
Try adjusting the TV sound. See
“Adjusting sound settings” on
page 40.
Make sure that the HDMI cable
is connected securely to your
TV and the device.
Device list.
•
•
•
•
Make sure that the device is
connected to your TV with an
HDMI cable.
Make sure that the INlink
feature is turned on. See
page 56.
•
•
•
Make sure that the TV speakers
are turned on and not muted.
See “Adjusting sound settings”
on page 40.
Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 56.
If you have connected an HDMI
CEC audio receiver, adjust the
volume on the receiver. When
your TV detects an audio
receiver, the TV speakers turn
off and sound plays through
receiver speakers only.
If the device is not an Insignia
device, it may not be
compatible with your TV.
•
•
•
•
Make sure that the device is a
CEC device. See the
documentation that came with
the device.
If the device is not an Insignia
device, it may not be
compatible with your TV.
My device does
not turn off
when I turn off
my TV.
Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 56.
Make sure that Device Auto
Power Off is set to On on the
INlink menu. See “Turning
Device Auto Power Off on or
off” on page 56.
The device may not support this
feature. See the documentation
that came with the device for
more information.
•
•
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Problem
Solution
Problem
Solution
My TV does not
turn on when I
turn on my
device.
Two volume
bars appear
when adjusting
the volume.
•
•
•
Make sure that the INlink
•
When you adjust the volume on
feature is turned on. See
“Turning INlink on or off” on
page 56.
the audio receiver or with the
TV remote control, a double
volume bar appears, one for the
TV volume and one for the
audio receiver volume.
Make sure that TV Auto Power
On is set to On on the INlink
menu. See “Turning TV Auto
Power On on or off” on page 57.
The device may not support this
feature. See the documentation
that came with the device for
more information.
I cannot select
the Root Menu
option on the
INlink menu.
•
The device may not support this
feature. See the documentation
that came with the device for
more information.
OR
The device’s
The Audio
Receiver
setting on the
INlink menu
keeps turning
back on after it
is turned off.
•
When Audio Receiver is set to
Off and INlink Control is set to
On and you make an
adjustment to the audio
receiver (for example, turn the
volume knob or press a button),
Audio Receiver is
automatically set to On. To
prevent this from happening,
turn off the INlink feature. See
“Turning INlink on or off” on
page 56.
root menu does
not open when
I select Root
Menu on the
Inlink menu.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Inputs
Specifications
2 (side)
E-EDID compliant
HDCP compliant
Specifications are subject to change without notice.
HDMI
Basic Model: LE-37MY83
Component video
Composite video
1 (back)
Dimensions and weight
1 (back)
Shared with component Y
33.3 × 20.3 × 2.7 in. (84.7 × 51.5 × 6.8 cm)
Without stand
15.9 lbs (7.2 kg)
Shared audio (component
and composite)
S-Video
PC/VGA
3.5mm DVI audio input
Yes
33.3 × 21.9 × 8.9 in. (84.7 × 55.7 × 22.5 cm)
With stand
No
No
18.1 lbs (8.2 kg)
Screen
1 (side)
Screen size measured
1 (side)
HDMI 1 (DVI+ARC) jack
36.5 in.
diagonally
DVI
Display type
LED
60Hz
1 (side)
USB
Panel 60 Hz vs.120 Hz
Display resolution
Panel resolution
Aspect ratio
Supports JPEG and firmware upgrade
720p
Antenna/Cable
Outputs
1 (side)
1366 (H) × 768 (V)
16:9
Video
No
Contrast ratio
1200:1
(typical)–panel
Analog audio/Headphone
Digital audio
WiFi
1 (side)
Dynamic contrast ratio–
list value
TV Brightness (minimum)
cd/m2
1 (optical) (side)
5500:1
No
No
200 nits
Ethernet
Comb filter
Response time
3d y/c digital
8 ms
Audio
Number: 2
Watts per channel: 5W
Horizontal viewing angle
Vertical viewing angle
178°
Speakers
178°
Power
Display resolutions
On: 60W
Standby: <0.5W
HDMI suggested resolutions
Component video suggested
resolutions
1080p, 1080i, 720p, 480p, 480i
1080i, 720p, 480p, 480i
Power consumption
Power input
AC 120 V, 60Hz
Miscellaneous
Tuner
OSD languages
INlink
Game Mode
ENERGY STAR qualified
Internet connectable
English, French, Spanish
Analog
Digital
NTSC
Yes
No
No
No
ATSC, 8-VSB, Clear-QAM
Stand column to TV screen:
M4 type (12 mm length) (2 pcs)
T4 type (12 mm length) (2 pcs)
Base to stand column:
TV base screws
T4 type (12 mm length) (4 pcs)
V-Chip (version 2.0)
Sleep timer
Channel labeling
Yes
Yes
Yes
VESA mount (mm)
(horizontal × vertical)
VESA mount screws
400 × 200
M6 type
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
Common universal remote control codes
Programming universal
remote controls
The following is a list of the most common remote
control codes. Codes for other remote controls are
available online at:
You can operate your Insignia TV with a new or
existing universal remote control.
or check with your cable or satellite TV provider for
the remote control code.
To program a universal remote control:
Insignia TV codes for universal remote controls (for all
Insignia TVs manufactured after Jan. 1, 2007)
1 See the table in “Common universal remote
control codes” for common codes. If you have
problems programming your remote or need a
different remote control code, visit
the latest remote control code information.
2 Follow your universal remote control’s
instructions to enter the TV code you found in
Step 1.
Universal remote control makes and models
One for All
Phillips
RCA
0054
0198, 0490
135
068, 069, 078, 096, 100, 164, 168, 229,
026
Sony
Tips
•
If your universal remote control has a
code search feature, run a code search
to identify a code that matches your
TV. See your universal remote control’s
instructions for details.
If your universal remote control has a
“Learn” feature, you can manually
program it using the Insignia TV
remote to “teach” the commands one
at a time. See your universal remote
control’s instructions for details.
Set-top box makes and models
068, 069, 078, 096, 100, 164, 168, 229,
026
Cablevision
•
2002, 1204, 1423, 1517, 0171, 1963,
0463, 1463, 0842, 1326, 167, 415, 424,
450, 456, 461, 507, 523, 567, 577, 586
Charter
10171, 11204, 11326, 11463, 11517,
11641, 11780, 11785, 11892, 11963,
12002
Comcast
For additional help and information:
Cox
1326, 1463
• Visit:
10171, 11204, 11326, 11517, 11564,
11641, 11963, 12002
DirectTV
• Call technical support for the universal remote
control or cable/satellite company of the
remote/set-top box you are trying to program.
Dish Network
Time Warner
TiVo
720
• Call the Insignia Customer Care Center
1-877-467-4289.
400, 450, 461, 456, 10463, 1463, 0463
0091
Verizon
0198, 0490
Tips
•
The brand name is often visible on the
front of the universal remote control,
and the model number is often visible
on the back.
•
If your universal remote control isn’t
listed on the chart, refer to your
universal remote control’s instructions
and try codes for the brands Orion,
Emerson, Memorex, Sansui, Sylvania,
or Zenith. You may need to try several
codes before finding a match.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-37D20SNA14/LE-37MY83 Insignia 37" LED TV
Dolby License Notice and Trademark Acknowledgement
Legal notices
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
HDMI
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Warning
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RF/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.
Canadian Notice
CAN ICES-3 (B)/NMB-3(B)
Standard Television Receiving Apparatus — Appareil de
réception télévision ordinaire, Canada BETS-7 / NTMR-7
IC Statement
This device complies with Industry Canada licence—exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 37" LED TV
•
•
Outages, static or other problems with over -the-air
reception of television broadcast signals.
Attempted repair by any person not authorized by Insignia
to service the Product
One-year limited warranty -
Insignia Televisions
Definitions:
•
•
Products sold "as is" or "with all faults"
Consumables, including but not limited to batteries (i.e. AA,
AAA, C etc.)
•
Products where the factory applied serial number has been
altered or removed
Loss or Theft of this product or any part of the product
Failures or Damage caused by any contact including but
not limited to liquids, gels or pastes.
Up to three (3) pixel failures (dots that are dark or
incorrectly illuminated) grouped in an area smaller than
one tenth (1/10) of the display size or up to five (5) pixel
failures throughout the display. (Pixel based displays may
contain a limited number of pixels that may not function
normally.)
Insignia Products ("Insignia") warrants to you, the original
purchaser of this new Insignia-branded television ("Product"),
that the Product shall be free of defects in the original
manufacturer of the material or workmanship for a period of one
(1) year from the date of your purchase of the Product ("Warranty
Period"). For this warranty to apply, your Product must be
purchased in the United States or Canada from a Best Buy or
Future Shop authorized dealer of Insignia brand products only
that are packaged with this warranty statement.
•
•
•
•
How long does the coverage last?
Problems with delay in motion or action of video images
while playing first-person style video games.
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. Your purchase date is printed on the
receipt you received with the Product.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT,
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail
store location and your television Product has a screen size of
less than 42 inches, please take your original receipt and the
Product to any Best Buy or Future Shop store. Make sure that you
place the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging. If you purchased the Product from a Best Buy or
Future Shop online web site, mail your original receipt and the
Product to the address listed on the web site. Make sure that you
put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a screen
42 inches or larger, in the United States call 1-888-BESTBUY,
Canada call 1-866-BESTBUY for Future Shop call 1-800-663-2275.
Call agents will diagnose and correct the issue over the phone or
will have an Insignia-approved repair technician dispatched to
your home.
© 2013 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at
Best Buy or Future Shop branded retail stores or websites to the
original purchaser of the product in the county where the
original purchase was made.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
Customer instruction/education
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as power surges
Accident(s)
Misuse, unintentional or intentional
Abuse, unintentional or intentional
Negligence
Commercial purposes/use, including but not limited to use
in a place of business or in communal areas of a multiple
dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.
Modification of any part of the Product, including the
antenna
Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage or power supply
•
•
•
•
73
Download from Www.Somanuals.com. All Manuals Search And Download.
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2013 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
V1 ENGLISH
13-0509
Download from Www.Somanuals.com. All Manuals Search And Download.
|