User Guide
5-Disc CD Player
NS-CD512
Download from Www.Somanuals.com. All Manuals Search And Download.
15 The wall plug is the disconnecting device. The
IMPORTANT SAFETY
INSTRUCTIONS
plug must remain readily operable.
16 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
17 The apparatus should not be exposed to
dripping or splashing, and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
WARNING
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within your player. This label is
located on the back of your player.
Warning
Your player employs a
laser system.
Use of controls,
adjustments, or the
This symbol indicates that there are
important operating and
maintenance instructions in the
literature accompanying your
player.
performance of
procedures other than
those specified may result in hazardous
radiation exposure.
Visible laser radiation is present when
open and interlocks defeated. Do not
stare into the beam.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Lightning
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet. This helps prevent
property damage and personal injury from
lightning and power line surges.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Replacement parts
When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
Safety check
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your CD player is in
correct operating condition.
11 Only use attachments/accessories specified by
Power source
the manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the
Operate your CD player only from the type of power
source indicated on the marking label. If you are not
sure of the type of power supplied to your home,
consult an electrician or your local power company.
cart/apparatus combination to avoid injury from
tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-CD512 Insignia 5-Disc CD Player
Insignia 5-Disc CD Player
#
Item
Description
Press to go the next track.
Press and hold to fast forward.
For more information, see “Controlling CD playback”
on page 7.
Introduction
Congratulations on your purchase of a high-quality
10
(forward)
Insignia product. Your NS-CD512 represents the
state of the art in CD player design and is designed
for reliable and trouble-free performance.
Plug headphones into this jack. For more information,
see “Connecting headphones” on page 5.
11
12
PHONES
CD tray
Insert as many as five CDs with label sides up into this
tray. To open or close the tray, press (open/close).
CD player components
Press one of these buttons to select the CD you want to
play. For more information, see “Playing a CD” on
page 7.
13
Package contents:
CD selector buttons
• 5-Disc CD player
When inserting or removing CDs, press to rotate the CD
tray one position clockwise.
14
15
• Remote control with two AAA batteries
• RCA stereo audio cable (6 ft./1.8 m)
• Quick Setup Guide
DISC SKIP
(open/close)
Press to open or close the CD tray.
• User Guide
Back
Front
3
1
2
15
14
12
13
NS-CD512
n
en
a
8
6
3 4
7
1 2
5
9
11
10
#
Item
Description
Connect this jack to the digital optical input jack on an
amplifier or receiver. For more information, see
“Connecting digital audio” on page 4.
DIGITAL OUT OPT
(optical)
1
#
Item
Description
Connect these jacks to the analog L/R jack on an
amplifier or receiver. For more information, see
“Connecting analog audio” on page 5.
Press to enter standby mode. To turn off the power,
press again. Your CD player must be in standby mode
to use the remote control.
2
3
1
ANALOG OUT L/R
AC power cord
POWER
In standby mode, press to turn on your CD player.
When your CD player is turned on, press to enter
standby mode.
Plug the AC power cord into a power outlet. For more
information, see “Connecting power” on page 5.
2
ON/STANDBY
Receives signals from the remote control. Do not block.
For more information, see “Aiming the remote
control” on page 6.
3
4
5
Remote control sensor
Display
Displays status information. For more information, see
“Display” on page 3.
Press to play CDs in random order. For more
information, see “Playing CDs in random order” on
page 8.
RANDOM
Press to play a track or CD repeatedly. For more
information, see “Repeating a track, CD, or all CDs” on
page 8.
6
7
REPEAT
(stop)
Press to stop playback or clear programmed tracks. For
more information, see “Controlling CD playback” on
page 7 or “Deleting playlist tracks or files” on page 9.
Press to go to the beginning of the currently playing
track.
8
9
Press and hold to fast reverse.
For more information, see “Controlling CD playback”
on page 7.
(reverse)
Press to start or pause playback.
For more information, see “Controlling CD playback”
on page 7.
(play/pause)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 5-Disc CD Player
Remote control
#
Button
Description
Press to select the previous folder on a CD containing
music files. For more information, see “Selecting a
folder on a CD containing music files” on page 7.
11
FOLDER –
1
2
(Audio CD only) Press to display the elapsed track time,
remaining track time, or remaining CD time. For more
information, see “Displaying the elapsed and
remaining track or CD time” on page 8.
12
13
TIME
DISC
3
Press this button, then press a number button to select
the CD you want to play. For more information, see
“Playing a CD” on page 7.
Press to fast forward on a CD. For more information,
see “Controlling CD playback” on page 7.
14
15
16
(fast forward)
(next)
(stop)
INTRO
4
5
6
7
8
13
14
Press to go to the next track. For more information, see
“Controlling CD playback” on page 7.
Press to stop playback. For more information, see
“Controlling CD playback” on page 7.
15
16
17
Press to play the first 10 seconds of each track or file.
For more information, see “Playing the first 10 seconds
of tracks or files” on page 8.
9
17
18
19
Press to create a playback loop. For more information,
see “Creating a playback loop” on page 8.
10
18
19
REPEAT A< >B
FOLDER +
Press to select the next folder on a CD containing
music files. For more information, see “Selecting a
folder on a CD containing music files” on page 7.
11
12
Display
2
1
3
P R OG
R ANDOM R E P E AT ALL 1 DIS CS
INTR O
1
4
7
2
5
8
3
6
9
A< >B
S C E NE TR AC K
10 11 12
13 14
1
2
3
4
5
4
5 6
7
8
9
10
#
Indicator
Description
#
Button
Description
Lights when your CD player is in program mode. For
more information, see “Programming a playlist” on
page 9.
Press to turn your CD player on or off (standby mode).
For more information, see “Turning your CD player on
or off” on page 6.
1
1
Program
ON/STANDBY
Lights when your CD player is in random mode. For
more information, see “Playing CDs in random order”
on page 8.
Press to adjust the brightness of the display. For more
information, see “Adjusting the display brightness” on
page 10.
2
3
2
3
4
5
Random play
Repeat play
DIMMER
Numbers
RANDOM
(pause)
Lights when your CD player is in repeat mode. For
more information, see “Repeating a track, CD, or all
CDs” on page 8.
Press to select a track for playing or programming. For
more information, see “Controlling CD playback” on
page 7 or “Programming a playlist” on page 9.
1–5 are the CD tray numbers.
lights when a CD is in the related CD tray slot.
lights when the CD in the related CD tray slot is
playing.
Press to play CDs in random order. For more
information, see “Playing CDs in random order” on
page 8.
4
CD trays
Press to pause playback. When playback is paused, the
indicator lights on the display.
Press ꢀ (play) to resume playback.
5
6
Play
Lights when your CD player is playing a CD.
Lights when CD playback is paused.
Press to fast reverse on a CD. For more information, see
“Controlling CD playback” on page 7.
Pause
6
7
(fast reverse)
ꢀ (play)
(previous)
Track or file number,
playing time, and
Displays the currently playing track or file number,
elapsed playing time, and other operating
operating information information.
Press to start playing a CD. For more information, see
“Playing a CD” on page 7.
7
Press to go to the beginning of the current track or to
go to the previous track. For more information, see
“Controlling CD playback” on page 7.
Lights when a playback loop is active. For more
information, see “Creating a playback loop” on page 8.
8
9
8
9
A< >B
Lights when your CD player in Intro mode. For more
information, see “Playing the first 10 seconds of tracks
or files” on page 8.
Press to program a playlist or to view the tracks in a
playlist. For more information, see “Programming a
playlist” on page 9.
Intro play
PRO.
Displays the number of files on the CD. For more
information, see “Display for an audio CD” on page 4
and “Display for a CD containing music files” on
page 4.
Press to repeat the current track or file, all the tracks or
files on a CD, or all the loaded CDs. For more
information, see “Repeating a track, CD, or all CDs” on
page 8.
10
Music calendar
10
REPEAT 1/F/ALL
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-CD512 Insignia 5-Disc CD Player
Display for an audio CD
When you load an audio CD into the CD tray, the
Connecting digital audio
You can connect your CD player to a home theater
or receiver using digital audio.
display shows the total number of tracks, the total
playing time, and the music calendar. The music
calendar displays the number of tracks on the audio
CD. If the audio CD contains more than 14 tracks, a
next to 14.
Note
You can use either digital or analog audio
connections, depening on the connection available
on your ampliꢀer or receiver.
Music
calendar
To connect digital audio:
1
4
7
2
5
8
3
6
9
• Connect a digital optical cable (not included) to
the DIGITAL OUT OPT jack on the back of your
CD player and to the digital optical input jack on a
receiver or sound system.
S C E NE TR AC K
S TE P
10 11 12
13 14
1
2
3
4
5
Total tracks
Total playing time
Back of CD player
n
en
a
Display for a CD containing music ꢀles
When you load a CD containing music ꢀles into the
CD tray, the display shows the total number of ꢀles
and folders on the CD. If the total number of ꢀles on
the CD is more than 99, the last two digits of the ꢀle
total are displayed in the total number of ꢀles area
and the ꢀrst digit of the ꢀle total is displayed in the
music calendar area.
DIGITAL
AUDIO IN
For example, if the total number of ꢀles is 923, The
display shows 23 in the total number of ꢀles area
and 9 in the music calendar area.
Digital optical cable
S C E NE
9
1
2
3
4
5
Total ꢀles
Total folders
Setting up your CD player
Positioning your CD player
Your CD player requires space for ventilation. For
best performance:
• Do not install your CD player in an enclosed area.
• Do not block the ventilation openings on your CD
player.
• Do not place anything on top of your CD player.
• Make sure that you allow 8 in. (20 cm) of space
around both sides and the back of your CD player
and 16 in. (40 cm) above your CD player for
correct ventilation.
Front view
16 in. (40 cm)
8 in.
NS-CD512
4
I
I
I
(20 cm)
I
U
I
Side view
8 in.
(20 cm)
Back of
CD player
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 5-Disc CD Player
Connecting analog audio
Connecting power
You can connect your CD player to a home theater
To connect power:
• Plug the AC power cord into a power outlet.
or receiver using analog audio.
Note
Cautions
You can use either digital or analog audio
connections, depening on the connection available
on your ampliꢀer or receiver.
•
Your CD player is not completely disconnected
from power when the power cord is plugged
into a power outlet. To completely disconnect
power, unplug the power cord.
To connect analog audio:
•
•
Make sure that the power outlet is easily
accessible.
Unplug the power cord from the power outlet if
your CD player will not be used for an extended
period of time.
• Connect a standard (analog) audio cable
(included) to the ANALOG OUT L/R audio jacks
on the back of your CD player and to the L/R
audio input jacks on a receiver or sound system.
Back of CD player
Installing remote control batteries
n
en
a
To install remote control batteries:
1 Press the battery compartment cover latch, then
remove the cover.
AUDIO IN
Analog audio cable
The connectors on standard
audio cables are often
color-coded.
Plug the red cable connector
into the red jack and the
white cable connector into
the white jack.
MADE IN CHINA
Connecting headphones
To connect headphones:
• Plug headphones into the PHONES jack on the
front of your CD player.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
Front of CD player
NS-CD512
MADE IN CHINA
3 Replace the cover.
Cautions
•
•
•
•
•
Make sure that you insert the batteries correctly.
Do not use rechargable (Ni-Cd) batteries.
Do not heat, open, or short-circuit batteries.
Do not throw batteries into a ꢀre.
Do not mix diꢁerent types of batteries or mix
old and new batteries.
If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
Note
The headphone jack size is 1/4" (6.35 mm). You need
an adatper to connect headphones with a 3.5mm
audio jack connector.
•
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-CD512 Insignia 5-Disc CD Player
Aiming the remote control
Playable CDs and files
Your CD player can play the following types of CDs:
To aim the remote control:
• Point the remote control at the remote control
sensor on the front of your CD player.
CD
Audio CD
Logo
Format or file type
PCM
NS-CD512
CD-R
Audio CD, MP3, WMA
Audio CD, MP3, WMA
CD-RW
• Your CD player supports CD-Rs and CD-RWs
recorded in Audio CD (CD-DA), MP3, or WMA
format.
• Your CD player can only play CD-Rs and CD-RWs
recorded with ISO9660 format.
23 ft. (7 m)
• Your CD player supports multi-session CDs. Some
multi-session CDs may take a long time to load
and some may not load at all.
Unplayable CDs
• Your CD player may not play all CD-Rs and
CD-RWs because of:
• Incomplete CD finalization
• Recording quality
• Physical condition of the CD
• Characteristics of the recording device
• Authoring software
See the operating instructions supplied with
your recording device for more information.
• Some Audio CDs use copy protection that does
not conform to the official CD standard. Your CD
player cannot play these nonstandard CDs.
Using your CD player
Playable audio file formats
Turning your CD player on or off
• MP3 (MPEG-1 Audio Layer-3).
• Sampling frequency: 32, 44.1, 48 kHz.
• Bit rate: 32 ~ 320 kbps.
To turn your CD player on or off:
1 Press POWER on the front of your CD player.
Your CD player turns on and enters standby
mode.
• Extension: mp3 and MP3.
• Fixed bit-rate files are recommended. Variable
bit-rate (VBR) files are playable, but playing
time may be displayed incorrectly.
2 Press ON/STANDBY to enter operating mode.
3 Press ON/STANDBY again to put your CD player
• ID3 tag is not available.
• WMA (Windows Media Audio)
• Sampling frequency: 32, 44.1, 48 kHz.
• Bit rate: 32 ~ 320 kbps.
in standby mode.
Note
Your CD player has an automatic power save feature.
When your CD player is in stop or pause mode for
mode than 30 minutes, your CD player automatically
switches to standby mode.
• Extension: wma and WMA.
• WMA tag is not available.
Press ON/STANDBY to enter operating mode again.
Notes
•
•
Folders can be up to ten levels deep.
For some files, it may not be possible to use
certain functions during playback.
•
•
Files protected by DRM (Digital Rights
Management) cannot be played.
When the size of a file or folder is larger than
your CD player’s memory capacity, your CD
player cannot recognize or play the file.
MPEG Layer-3 audio coding technology is
licensed from Fraunhofer IIS and Thomson.
Windows Media and the Windows logo are
trademarks or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
•
•
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 5-Disc CD Player
Inserting CDs
Changing CDs in the CD tray during playback
Your CD player can play:
• Standard 4.72-in. (12cm) CDs
• 3-in. (8 cm) CDs (placed on the inside circle of the
CD tray)
You can change CDs in the CD tray while a CD is
playing. For example, if you are playing the CD in
the first (1) tray slot, you can change the CDs tray
slots 2 through 5.
To change CDs in the CD tray during playback:
1 Press
(open/close) to open the CD tray.
NS-CD512
2 If the CD you want to change is not visible, press
DISC SKIP to rotate the CD tray clockwise one
position.
I
3 Remove a CD that is not playing and insert
another CD in the CD tray.
4 Press
(open/close) to close the CD tray.
CD tray
Label side up
Selecting a track or file for playback
To insert CDs:
1 Press (open/close) to open the CD tray.
2 Place a CD in the tray slot, label side up.
To select a track or file for playback:
• Press the number button for the track or file you
want to play. If the track or file number has more
than one digit, press the number buttons for the
track or file. Button presses must be within two
seconds of each other.
3 Press DISC SKIP to rotate the CD tray clockwise
one position.
4 Place a CD in the next tray slot. You can place
For example:
five CDs in the tray.
• If the track or file number is 3, press 3.
• If the track or file number is 15, press 1, then
press 5.
• If the track or file number is 123, press 1,
press 2, then press 3.
5 Press
(open/close) to close the CD tray.
Playing a CD
To play a CD:
1 Insert a CD in the CD tray.
Selecting a folder on a CD containing music
files
2 If you have more than one CD loaded in the CD
tray, press DISC, then press the number
(1 through 5) for the CD you want to play.
Button presses must be within two seconds of
each other.
To select a folder on a CD containing music files:
• Press FOLDER – to go to the previous folder or
press FOLDER + to go to the next folder. The first
file in the selected folder plays automatically.
Note
When a CD is in a CD tray, the loaded CD indicator
(
) lights on the display. When a CD is playing the
CD playing indicator (
) on the display.
3 Press ꢀ (play). The play indicator (ꢀ) lights on
the display.
Controlling CD playback
To control CD playback:
• Press (pause) to pause playback. The pause
indicator ( ) lights on the display. Press ꢀ (play)
to resume playback.
• Press (stop) to stop playback.
• Press
• Press
or
to fast reverse or fast forward.
(previous) to go to previous track or file.
If playback is mid-way through the track or file,
the first time you press this button, your CD player
goes to the beginning of the track or file. Press
this button again to go to the previous track.
• Press
(next) to go to the next track/file.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-CD512 Insignia 5-Disc CD Player
Displaying the elapsed and remaining track
or CD time
Repeating a track, CD, or all CDs
To repeat a track, CD, or all CDs:
Note
• While a track is playing, press REPEAT 1/F/ALL.
Each time you press this button the repeat mode
changes.
The time display only works with Audio CDs.
To display the elapsed and remaining track or
CD time:
• While an Audio CD is playing, press TIME one or
more times.
For an Audio CD:
• Press one time to repeat the current track.
• Press two times to repeat the current CD.
• Press three times to repeat all the CDs.
• Press four times to cancel repeat mode and
resume normal playback.
TR AC K
INDE X
7
8
9
10 11 12
1
2
3
4
5
ȥ
For a CD containing music files:
The first button press shows the elapsed time for the current track.
• Press one time to repeat the current file.
• Press two times to repeat the current folder.
• Press three times to repeat the current CD.
• Press four times to repeat all the CDs.
• Press five times to cancel repeat mode and
resume normal playback.
Ȧ
TR AC K
INDE X S TE P
7
8
9
10 11 12
1
2
3
4
5
The second button press shows the remaining time for the current track.
Ȧ
Notes
•
•
In random play mode, you can only repeat the
current track or file.
When playing a playlist you programmed,
repeat mode is not available.
7
8
9
10 11 12
1
2
3
4
5
The third button press shows the remaining time for the CD.
Creating a playback loop
Note
You can create a playback loop to repeat a section
of a track or file.
The time display is “--:--” in random mode.
To create a playback loop:
Playing CDs in random order
1 Play the track or file until it reaches the starting
point for your playback loop, then press A ꢀ B.
The “REPEAT” and “A<·>” indicators light on the
display.
2 Continue playing the track or file until it reaches
the ending point for your loop, then press
A ꢀ B. The “A<·>B” indicator lights on the
display. Your CD player plays your playback loop
repeatedly.
To play CDs in random order:
• While a track is playing, press RANDOM. The
“RANDOM” indicator lights on the display. Each
time you press this button the random mode
changes.
• Press one time to play the tracks or files on the
current CD randomly.
• Press two times to play all the CDs randomly.
• Press three times to cancel random mode and
3 To resume normal playback, press A ꢀ B.
resume normal playback.
Notes
Notes
•
•
A ꢁ B repeat only works with a single track or
•
•
If a CD or folder contains more than 100 tracks
or files, the CD or folder is skipped during
random play.
If you press a number button during random
play, random mode is cancelled.
file.
A ꢁ B repeat does not work in random mode or
Intro mode.
Playing the first 10 seconds of tracks or files
To play the first 10 seconds of tracks or files:
• While a CD is playing, press INTRO. The “INTRO”
indicator lights on the display. Each time you
press this button the Intro mode changes.
• Press one time to play the first 10 seconds of
each track or file on the currently playing CD.
• Press two times to play the first 10 seconds of
the first track or file on the all the CDs.
• Press three times to cancel Intro mode.
Note
When playing a playlist you programmed, Intro mode
is not available.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 5-Disc CD Player
To change a track or file in your playlist to a
different track or file:
Programming a playlist
You can program a playlist of your favorite songs in
the order you want to play them. Your playlist can
have as many as 32 tracks or files.
Note
In the following task track 9 is replaced with track 10.
Your playlist can include tracks from multiple discs.
1 In stop mode, press PRO. The first track or file
To program a playlist using one disc:
number in your playlist appears on the display.
1 With playback stopped, press PRO. The “PROG”
2 Continue to press PRO. until the display shows
the track number you want to replace in the
playlist.
indicator blinks on the display.
2 Press
(previous) or
(next) to select the
first track or file number for your playlist, then
press PRO. to add the track or file to your
playlist.
P R OG
TR AC K
S TE P
1
2
3
4
5
The track or file number and the assigned
program number appears on the display.
3 While the track or file number you want to
Track or file number
replace is displayed, press
(previous) or
(next) to select the track or file number for
the replacement track or file, then press PRO.
P R OG
TR AC K
1
2
3
4
5
OR
Assigned program number
Press the number buttons to select the track or
file number.
3 Repeat Step 2 to add more tracks or files to your
Note
playlist.
Button presses must be within a few seconds of each
other.
4 When you have finished adding tracks or files,
press ꢀ (play) to play your playlist.
The replacement track or file number and the
assigned program number appear on the
display.
To program a playlist using more than one disc:
1 With playback stopped, press PRO. The “PROG”
indicator blinks on the display.
P R OG
TR AC K
S TE P
2 Press DISC, then press the number (1 through 5)
for the CD you want. Button presses must be
within two seconds of each other.
1
2
3
4
5
Note
4 When the replacement track or file number
disappears from the display, you can repeat
these steps to replace another track or file.
When a CD is in a CD tray, the loaded CD indicator
(
) lights on the display.
Deleting playlist tracks or files
3 Press
(previous) or
(next) to select the
first track or file number for your playlist, then
press PRO. to add the track or file to your
playlist.
To delete all tracks or files in your playlist:
1 Press and hold (stop) for more than four
seconds to delete all the tracks or files from your
playlist.
The track or file number and the assigned
program number appears on the display.
Note
4 Repeat Steps 2 and 3 to add more tracks or files
to your playlist.
You can also delete a playlist by opening the CD tray.
5 When you have finished adding tracks or files,
press ꢀ (play) to play your playlist.
To delete a specific track or file:
1 In stop mode, press PRO. The first track or file
To view the track or file numbers in your playlist:
number in your playlist appears on the display.
1 In stop mode, press PRO. The first track or file
2 Continue to press PRO. until the display shows
the track number you want to delete from the
playlist.
number in your playlist appears on the display.
2 Press PRO. again to view the next track or file
number. Each time you press this button, the
next track or file number appears on the display.
3 Press (stop) to delete the track or file from
your playlist.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-CD512 Insignia 5-Disc CD Player
Adjusting the display brightness
Problem
Possible cause
Possible solution
An error was made when
programming the CD.
Repeat the programming task.
See “Programming a playlist”
on page 9.
Make sure that you do not have
more than 32 tracks or files in
your playlist.
This is not a malfunction. The
more files and folder that a CD
contains, the longer it takes
your CD player to read the CD.
To adjust the display brightness:
• Press DIMMER one or more times. You can select
on, dim, or off.
Programming a
playlist does not
work
Your playlist may have too
many tracks or files.
Note
If you press a button when the display is turned off,
the display is automatically turned on.
Reading a CD
takes too long
The CD has many files and
folders.
Troubleshooting
Caution
Maintaining
Do not attempt to repair your CD player. There are no
user-serviceable parts inside.
Handling CDs
• To keep a CD clean, do not touch the play side
Note
(non-label side) of the CD.
If none of the following solutions works, try turning
off your CD player, then turning it back on.
• Do not attach paper or tape to the CD.
Problem
Possible cause
Possible solution
The AC power cord is not
connected securely.
Make sure that the AC power
cord is securely plugged into
the power outlet.
The power outlet may be dead. Test the power outlet by
plugging a device, such as a
No power
lamp, into the outlet and
Cleaning CDs
turning the device on.
The CD is loaded upside down. Make sure that the CD is loaded
with the label side facing up.
• Before playback, wipe the CD outwards from the
center (not in a circle) with a clean cloth.
The CD is dirty.
Clean the CD. See “Cleaning
CDs” on page 10.
The CD is defective or
scratched.
Try another CD.
CD does not play
The CD is not compatible with Make sure that the CD is
your CD player.
compatible. See “Unplayable
CDs” on page 6.
Music files on the CD are not in Your CD player only plays MP3
a compatible format.
or WMA music files. See
“Playable audio file formats”
on page 6.
If the indicator appears on
the display, press ꢀ (play) to
resume playback.
• If you cannot clean the CD with a dry cloth, wipe
the CD with a slightly moistened, soft cloth, then
dry it with a soft cloth.
• Do not use any solvents, such as paint thinner,
benzine, commercially available cleaners, or
anti-static spray designed for vinyl records.
Playback may be paused.
Your home theater or receiver is Check the cable connections.
not connected correctly or
securely.
See “Connecting digital audio”
on page 4 or “Connecting
analog audio” on page 5.
No sound
Your amplifier or receiver is not See the documentation that
operating correctly.
came with your amplifier or
receiver.
If more than one audio device
is connected to your amplifier
or receiver, make sure that your
CD player is the selected
device.
Poor or distorted Your home theater or receiver is Check the cable connections.
sound
not connected correctly or
securely.
See “Connecting digital audio”
on page 4 or “Connecting
analog audio” on page 5.
The CD may be dirty or
scratched.
Try cleaning the CD. See
“Cleaning CDs” on page 10. If
cleaning the CD does not
correct the problem, try
another CD.
Sound skips
Your CD player may be on a
surface that is subject to
vibration or bumping.
Move your CD player to a
surface that is not subject to
vibration and where it cannot
be bumped.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 5-Disc CD Player
Specifications
Legal notices
Specifications are subject to change without notice.
FCC Part 15
This equipment has been tested and found to comply with the
Audio performance
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
Number of channels
Frequency response
2
20~20,000 Hz
0.8 dB
A Weighted
94 dB
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Signal to noise ratio
Dynamic range
86 dB
Total harmonic
distortion
1 kHz < 0.05%
2 V RMS
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Audio output level
Signal format
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician
for help.
Sampling frequency
D/A conversion
44.1 kHz
Multibit (sigma-delta conversion)
8 times
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
Oversampling
General
Canada ICES-003 statement
Power supply
120 V ~ 60 Hz
23 W
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme
NMB-003 du Canada.
Power consumption
Dimensions (WxHxD,
including protruding
parts)
17.3 × 4.4 × 15.6 in. (440 × 112 × 397 mm)
12.4 lbs (5.6 kg)
Weight
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-CD512 Insignia 5-Disc CD Player
This page intensionally left blank
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 5-Disc CD Player
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
One-year limited warranty
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new product (“Product”), that the Product shall
be free of defects in the original manufacture of the material or
workmanship for a period of one (1) year from the date of your
purchase of the Product (“Warranty Period”). This Product must
be purchased from an authorized dealer of Insignia brand
products and packaged with this warranty statement. This
warranty does not cover refurbished Product. If you notify
Insignia during the Warranty Period of a defect covered by this
warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. The purchase date is printed on the
receipt you received with the Product.
What does this warranty cover?
Contact Insignia:
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
For customer service please call 1-877-467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2012 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the
antenna
Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
•
This warranty also does not cover:
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been
altered or removed
•
•
•
13
Download from Www.Somanuals.com. All Manuals Search And Download.
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Rich eld, MN 55423-3645 USA
© 2012 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
12-0736
Download from Www.Somanuals.com. All Manuals Search And Download.
|