Insignia Car Stereo System NS C4113 User Manual

User Guide  
Car CD Deck with USB Port  
NS-C4113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning—Do not expose your car CD deck  
to water or excessive moisture. This could  
cause a short circuit, a fire, or other severe  
damage. Do not use liquid cleaners or  
aerosol cleaners. Use a damp cloth for  
cleaning.  
Servicing or modifying—Do not attempt to  
service your car CD deck yourself, because  
opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer  
all servicing to qualified service personnel.  
Do not attempt to modify the unit, because  
modifying the unit may cause an accident.  
Replacement parts—When replacement  
parts are required, make sure that the  
service technician uses replacement parts  
specified by the manufacturer that have the  
same characteristics as the original part.  
Unauthorized substitutions may result in fire,  
electric shock, injury to persons, or other  
hazards.  
Safety check—Upon completion of any  
service or repairs to your car CD deck, ask  
the service technician to perform routine  
safety checks to determine that your car CD  
deck is in correct operating condition.  
Insignia NS-C4113  
Car CD Deck with  
USB Port  
Contents  
Welcome  
Congratulations on your purchase of a  
high-quality Insignia product. Your NS-C4113  
represents the state of the art in car CD decks  
and is designed for reliable and trouble-free  
performance.  
Connections—Make sure that you connect  
the color coded leads according to the  
diagram. Incorrect connections may cause  
the unit to malfunction or damage the  
vehicle’s electrical system.  
Be sure to connect the speaker (-) leads to  
the speaker (-) terminal. Never connect the  
left and right channel speaker cables to each  
other or to the vehicle body.  
Safety information  
Warning  
This car CD deck is a class 1 laser product. To prevent  
direct exposure to the laser system, do not open the unit.  
The laser beam may hurt your eyes. If the deck requires  
adjustments, contact an authorized service center.  
Make sure all the connections are completely  
correct before turning on your unit.  
Fuses—When replacing the fuse(s), the  
replacement must be of the same amperage  
as shown on the fuse holder.  
Caution  
Any change or modification to your car CD deck not  
expressly approved by the manufacturer or its authorized  
parties could void your authority to operate your unit.  
Warning  
Never replace any fuse with one of a higher value than the  
fuse supplied with your unit. Using a higher current rated  
fuse may cause damage to your unit and/or electrical wiring.  
Important safeguards  
Heat—Do not block vents or radiator panels.  
Blocking them will cause heat to build up  
inside and may result in fire. Do not operate  
the car CD deck in extremely high or low  
temperatures. Make sure that the  
temperature inside the car is between 140°F  
(+60°C) and 14°F (-10°C) before turning on  
your unit .  
Read instructions—Read all the safety and  
operating instructions before operating your  
car CD deck.  
Retain instructions—Retain the safety and  
operating instructions for future reference.  
Follow warnings—Follow all warnings on  
your car CD deck and in the operating  
instructions.  
Note  
Follow instructions—Follow all operating  
Do not use and store the player in a dusty, hot, or humid  
environment.  
and use instructions.  
When driving—Keep the sound level of your  
car CD deck at an appropriate level. Driving  
with the volume at a high level could prevent  
you from hearing sounds outside and around  
the car, which could cause an accident. Stop  
the car before doing anything that could  
interfere with your driving.  
When parked—Parking in direct sunlight can  
result in very high temperature levels inside  
your car. Let the interior, and your car CD  
deck, cool down before switching the player  
on.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Insignia NS-C4113 Car CD Deck with USB Port  
Features  
Parts list  
Item  
Description  
Mounting sleeve (1)  
Back strap (1)  
M 5×5 screws (4)  
Keys (2)  
Rubber grommet for wire harness (1)  
Rear mounting bolt (1)  
Main wire harness (1)  
Outer trim frame (1)  
User Guide (1)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Insignia NS-C4113 Car CD Deck with USB Port  
Front panel and base unit  
18  
17  
16  
#
Description  
(power) button  
Function  
1
Press to turn the player on. Press again to turn the player off.  
2
3
4
5
MUTE button  
EQ button  
Press to mute the sound. Press again to restore the sound.  
Press to select the equalization preset mode.  
Shows the current status of the CD deck.  
LCD panel  
Infrared sensor  
The infrared sensor for the remote control. Receives the signal from the remote control to control the CD  
deck.  
6
7
8
9
DSP button  
Press to display the time. Press and hold to set the time, using the VOL/SEL knob.  
Press to release the front panel to insert or remove a CD or to remove the front panel from the head unit.  
Insert a USB device into this port.  
REL (release) button  
USB port  
AMS button  
In radio mode, press briefly to scan each stored station for five seconds. Press and hold to store station  
presets (six for each radio band).  
In MP3 mode, press to use search modes.  
10  
Plug an external audio source into the 3.5 mm port.  
AUX In port  
11 Preset buttons (radio)  
Playback controls (CD)  
In radio mode, press to access station presets in each band.  
In CD playback mode, press the following:  
• 1/  
(play/pause)  
• 2/INT (intermittent)  
• 3/RPT (repeat)  
• 4/RDM (random)  
• 5/DN (down)  
• 6/UP (up)  
12 MODE button  
When the player is on, press to toggle the mode between TUNER, CD, USB, or AUX IN.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insignia NS-C4113 Car CD Deck with USB Port  
#
Description  
Function  
13 VOL (volume) knob/  
SEL button  
Turn clockwise to increase the volume. Turn counterclockwise to decrease the volume.  
Press to select the sound characteristic mode you want. Choices include VOL (volume - default), BAS  
(bass), TRE (treble), FAD (fader), and BAL (balance). When you select a characteristic, turn the VOL knob  
to adjust.  
Press and hold for three seconds to cycle through LOUD OFF, BEEP ON, STEREO, and DX. See Using  
the CD deck - basic operation” on page 9 for an explanation of these features.  
14 BAND button  
Press to switch radio bands between FM1 - FM2 - FM3 - MW1 (AM1) - MW2 (AM2).  
15  
In CD mode, press to go to the previous track or next track. Press and hold for fast reverse or fast  
forward.  
In radio mode, press to search for a station. Press three times to search for stations automatically.  
The following details are not shown, but are located behind the front panel  
Press to eject the CD after releasing the front panel.  
(previous) button  
(next) button  
16  
(eject) button  
17 RESET button  
Press to reset the CD deck to factory settings.  
18 CD slot  
Insert the CD into this slot, label side up, to begin playback.  
Remote control  
#
Description  
Function  
6
LOC button  
In radio mode, press to toggle between  
distant and local stations.  
1
7
8
ST button  
In radio mode, press to toggle between  
stereo and mono sound.  
Number buttons  
(radio)/Playback  
controls (CD)  
In radio mode, press to access station  
presets in each band.  
In CD playback mode, press the  
following:  
9
MODE  
2
• 1/  
(play/pause)  
10  
• 2/INT (intermittent)  
• 3/RPT (repeat)  
• 4/RDM (random)  
• 5/DOWN  
3
11  
12  
• 6/UP  
4
BAND  
9
Press to increase the volume.  
Volume up  
5
6
13  
14  
10  
In radio mode, press to tune the radio to  
a lower frequency. Press for more than  
three seconds to select stations  
automatically.  
In CD playback mode, press to select the  
previous track. Press and hold to search  
backward.  
Search back  
15  
7
11  
In radio mode, press to tune the radio to  
a higher frequency. Press for more than  
three seconds to select stations  
automatically.  
Search  
forward  
NS-C4113  
In CD playback mode, press to select the  
next track. Press and hold to search  
forward.  
8
12  
Press to decrease the volume.  
Volume down  
13 AMS button  
In radio mode, press briefly to scan each  
stored station for five seconds. Press  
and hold to store station presets (six for  
each radio band).  
#
Description  
Function  
1
PWR button  
Press to turn the player on. Press again  
to turn the player off.  
14 DISP button  
Press to display the time. Press and hold  
briefly to set the time in conjunction with  
the Volume up and Volume down  
buttons.  
2
3
MODE button  
When the player is on, press to toggle  
the mode between TUNER, AUX-F,  
AUX-R, CD, and USB DRIV.  
SEL/MENU button Press to cycle through sound  
characteristic modes. Choices include  
VOL (volume - default), BAS (bass), TRE  
(treble), FAD (fader), and BAL (balance).  
When you select a characteristic, turn  
the VOL knob to adjust up or down.  
15 MUTE button  
Press to mute the sound. Press again to  
restore the sound.  
4
5
BAND button  
Press to switch radio bands between  
FM1 - FM2 - FM3 - MW1 (AM1) - MW2  
(AM2).  
LOUD button  
Press to activate the loudness feature.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insignia NS-C4113 Car CD Deck with USB Port  
5 Slide the player into the mounting sleeve until  
Installing your car CD deck  
it clicks into place.  
Installation method 1 - DIN front mount  
To install the car CD deck using the DIN front  
mount:  
1 Slide the mounting sleeve into the opening  
you have prepared in the dashboard.  
Opening size  
7.16 in (182 mm) × 2.1 in (53 mm)  
6 Secure the rear mounting bolt to the firewall  
or other sturdy support using the back strap  
(if necessary).  
Installation method 2 - screw mount  
Note  
The outer trim frame, the hooks, and the mounting sleeve  
are not used for this installation method.  
To install the car CD deck using the screw  
holes:  
2 When the mounting sleeve is in the correct  
position, bend several mounting claws  
outward to achieve a tight fit and lock the  
mounting sleeve into place.  
1 Remove the hooks from the sides of your CD  
deck.  
Brackets supplied with your car  
Remove the hooks from both  
sides of your CD deck  
3 Install the outer trim frame on the CD deck.  
2 Mount the brackets to the sides of the CD  
deck using two screw holes on each side.  
3 Connect the antenna, the main wire harness  
and the rear mounting bolt (if necessary to  
support your CD deck).  
4 Fasten the brackets to the mounting location  
in your car’s dashboard or console.  
Removing the CD deck (DIN installation)  
To remove the CD deck:  
1 Remove the outer trim frame from the CD  
deck.  
4 Connect the antenna, the main wire harness  
and the rear mounting bolt (if necessary to  
support your CD deck).  
2 Insert the keys (supplied) into the sides of the  
CD deck (as shown) until they click, to  
release the internal locks, then slide the deck  
out of the mounting sleeve.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Insignia NS-C4113 Car CD Deck with USB Port  
2 Slide the front panel to the right, then onto  
the shaft on the left side of the head unit,  
then rotate the front panel up until it closes.  
Installing the front panel  
To install the front panel:  
1 Put notch A onto shaft B, the press gently  
To remove the front panel:  
into the right side of the head unit.  
1 Press the REL button on the front panel. The  
Shaft B  
panel rotates outwards on the bottom hinges.  
2 Slide the front panel to the right and take it off  
the hinge on the left side of the head unit,  
then remove the front panel.  
Notch A  
Wiring your car CD deck  
Connect the wires to the back of the CD deck as  
shown in the following illustration. You must wire  
the main wiring harness prior to installing the CD  
deck into the dashboard.  
Caution  
Be very careful to wire the main wiring harness correctly. If  
you wire it incorrectly, or fail to properly insulate the  
connections, you could damage the player, your speakers,  
your car, or all of the above.  
Antenna  
Subwoofer (brown)  
Front RCA (dark grey)  
Rear RCA (light grey)  
Left (white)  
Right (red)  
Hole for  
mounting  
bolt  
Left (white)  
Right (red)  
Red  
Yellow  
Black  
Ignition key  
Choke  
box  
Memory backup 12V  
Negative ground  
Blue  
To power antenna  
- Violet/Black  
- Green/Black  
Right rear speaker  
Right front speaker  
Left rear speaker  
+ Violet  
+ Green  
- White/Black  
- Grey/Black  
+ Grey  
Left front speaker  
+ White  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Insignia NS-C4113 Car CD Deck with USB Port  
DXTurn the VOL knob to toggle  
between DX (to receive both local and  
distant stations) and LOCAL (to  
receive only local stations). Pressing  
the LOC button on the remote control  
does the same thing.  
Using your car CD deck  
Note  
After completing the installation, or after  
disconnecting or replacing your car’s battery,  
when you are ready to use the player, open the  
front panel, then press the RESET button on the  
head unit with a pointed object (such as ball-point  
pen) to set the unit to initial status.  
Note  
If no changes are made within three seconds, the  
CD deck exits the adjustment mode.  
You can also press RESET if an error occurs on  
the LCD. Pressing RESET erases your presets  
and the current time on the display.  
In TUNER and AUX modes, press DISP  
to display time information, press again to  
return to normal display.  
Using the CD deck - basic operation  
4 To turn the CD deck off, press and hold  
(power), or PWR on the remote control, until  
it turns off.  
To use the CD deck:  
1 Press  
(power), or PWR on the remote  
control, to turn on the CD deck (inserting a  
CD or USB device also turns on the deck).  
Setting the time  
To set the time:  
2 Press MODE, or MOD on the remote control,  
repeatedly to toggle the mode between  
TUNER, CD, USB, and AUX IN.  
1 Press and hold DISP until the two dots in the  
middle of the clock stop blinking.  
3 Make the following adjustments, according to  
2 Press Volume up to adjust the hours, and  
your taste:  
Volume down to adjust the minutes.  
Turn the VOL/SEL knob to adjust the  
volume (clockwise to increase/  
counterclockwise to decrease).  
Press MUTE to mute the sound. Press  
again to restore the sound to the previous  
setting.  
Press LOUD on the remote control to turn  
on the loudness feature. “LOUD” appears  
on the LCD and the low frequency of the  
sound is enhanced. Press LOUD again to  
turn off this feature.  
Press VOL/SEL to select the sound  
characteristic mode you want. Choices  
include VOL (volume - default), BAS  
(bass), TRE (treble), FAD (fader), and  
BAL (balance). When you select a  
characteristic, turn the VOL/SEL knob to  
adjust.  
3 Press DISP twice display time information,  
press again to return to normal display.  
Note  
You can also use the DSP button iwith the  
VOL/SEL knob on the front panel to perform the  
same operation.  
Using the CD player  
To use the CD player:  
1 Open the front panel and insert a CD/MP3  
disc (label side up) in the CD slot, or remove  
the port cover and insert a USB device into  
the USB port. The CD deck automatically  
turns on and switches to CD (or USB DRIV)  
mode.  
Note  
Press and hold VOL/SEL on the head unit  
for three seconds to cycle through LOUD  
OFF, BEEP ON, STEREO, and DX.  
If a CD/MP3 or USB device is already inserted,  
press MODE to switch to the mode you want.  
To go to the next or previous track, press  
LOUDTurn the VOL knob to toggle  
between LOUD ON and LOUD OFF.  
Pressing the LOUD button on the  
remote control performs the same  
function.  
(next) or  
(previous), or  
Search back or  
Search forward on the  
remote control, respectively.  
To fast forward or fast reverse the CD (or  
USB), press and hold  
(previous), or Search back or  
Search forward on the remote control,  
respectively.  
(next) or  
BEEP ONTurn the VOL knob to  
choose between BEEP ON and BEEP  
OFF (Beep On: Radio beeps when  
buttons are pressed. Beep Off: Radio  
does not beep when buttons are  
pressed.)  
STEREOTurn the VOL knob to toggle  
between STEREO (to receive stereo  
stations) and MONO (to receive mono  
stations). Pressing the ST button on  
the remote control does the same  
thing.  
Press 1/  
(play/pause) to pause  
playback. Press 1/  
(play/pause) again  
to resume playback. Press and hold 1/  
(play/pause) for one second to go to  
the first track on the disc.  
Press 2/INT to play the first 10 seconds of  
each track on the disc. INT appears on  
the LCD, as well as the track number and  
elapsed time. When you get to the track  
you want, press 2/INT again to play it.  
Press 3/RPT to play the CD in random  
order (shuffle). Press 3/RPT again to  
resume normal playback.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Insignia NS-C4113 Car CD Deck with USB Port  
Press 4/RDM to play the CD in random  
order (shuffle). Press 4/RDM again to  
resume normal playback.  
In MP3 mode, press 5/DN to go back 10  
tracks on the disc, or press 6/UP to  
forward 10 tracks on the disc.  
2 Press VOL/SEL. The LCD shows “CD 01”  
blinking (indicating the first folder on the  
disc).  
3 Rotate the VOL/SEL knob until “CD 03”  
appears (blinking) on the LCD, then press  
VOL/SEL to select that folder on the disc.  
The LCD shows “01” blinking (indicating the  
first file in that folder).  
2 To eject the CD, press REL to open the front  
panel, then press  
EJECT. The player  
automatically switches to TUNER mode  
4 Rotate the VOL/SEL knob until “03” is  
blinking on the LCD, then press VOL/SEL to  
select that file.  
when the CD is ejected.  
-OR-  
To remove a USB device pull it straight out of  
the USB port, then replace the USB port  
cover. The CD deck reverts to TUNER mode.  
Searching characters (file names) in MP3 mode  
In this example, we are searching for file name  
cx.MP3 on the disc. The disc file structure looks  
like this:  
Searching tracks in MP3 mode  
In this example, we are searching for track 245.  
To search tracks on an MP3 disc:  
1 Press AMS to enter the initial search mode.  
The LCD shows “TRK SCH.”  
2 Press VOL/SEL. The LCD shows “TRK 001,”  
and the third number (1) blinks for five  
seconds.  
To search file names on an MP3 disc:  
3 Rotate the VOL/SEL knob so that the third  
number changes to a “5,then press  
VOL/SEL to select that number. The LCD  
shows “TRK 005.”  
1 Press AMS three times to enter the character  
(file name) search mode. The LCD shows  
“CHAR SCH.”  
2 Press VOL/SEL. The LCD shows a blinking  
Note  
“A” (the first letter of the file name).  
If you press VOL/SEL more than three seconds,  
3 Rotate the VOL/SEL knob until a blinking “C”  
appears on the LCD, then press VOL/SEL to  
select it as the first letter of the file name.  
the fifth track is played.  
When you have selected the first number, the  
second number (0) blinks for five seconds.  
Note  
4 Rotate the VOL/SEL knob so that the second  
number changes to a 4, then press VOL/SEL  
to select that number. The LCD shows “TRK  
045.”  
If you press VOL/SEL more than .5 seconds, the  
first file that begins with “C” is played.  
“CA” now appears on the LCD, with the “A”  
blinking.  
Note  
4 Rotate the VOL/SEL knob until “X” is blinking  
on the LCD, then press and hold VOL/SEL to  
select that letter and file.  
If you press VOL/SEL more than three seconds,  
the 45th track is played.  
When you have selected the second number,  
the first number (0) blinks for five seconds.  
5 Press VOL/SEL and file cx.MP3 is played.  
5 Rotate the VOL/SEL knob so that the first  
number changes to a “2,then press  
VOL/SEL to select that number. The LCD  
shows “TRK 245.”  
Note  
For clarity, the example above uses simple  
character files. In actual operation, longer file  
names are typically used, possibly requiring  
several more steps to find the file you are looking  
for.  
6 Press VOL/SEL to play track 245.  
Searching files in MP3 mode  
Using the radio  
In this example, we are searching for the third  
file (3.MP3) in folder CD 03. The disc file  
structure looks like this:  
To use the radio:  
1 Press  
(power), or PWR on the remote  
control, to turn on the CD deck.  
CD 01  
CD 02  
2 Press MODE repeatedly to select TUNER.  
3 Press BAND to cycle through the following  
bands:  
FM1 - FM2 - FM3 - MW1 (AM1) - MW2  
(AM2).  
CD 03  
To manually tune the radio—Press  
(next) or  
or  
(previous) on the head unit,  
Search forward  
To search files on an MP3 disc:  
Search back or  
1 Press AMS twice to enter the file search  
on the remote control, to select a station  
with a higher or lower frequency,  
respectively.  
mode. The LCD shows “FILE SCH.”  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insignia NS-C4113 Car CD Deck with USB Port  
To automatically tune the radio—Press  
Problem  
Possible cause  
Solution  
and hold  
(next) or  
(previous), or  
The CD does  
not play  
The CD was incorrectly Reinsert the CD, label  
inserted.  
Search back or  
Search forward on  
side up.  
the remote control, for more than three  
seconds. The radio tunes to, and plays,  
the next available station (up or down,  
respectively).  
The CD is defective.  
Try another CD.  
Dirty or damaged disc. Clean the disc. If the  
disc is damaged too  
To automatically store stations in  
preset memory—Press and hold AMS  
for more than three seconds. The radio  
automatically scans the available stations  
and stores the six strongest stations in  
presets 1 through 6.  
To manually store stations in preset  
memoryTune to the desired station,  
then press a number button for more than  
three seconds (until the LCD shows the  
number). The station is stored as a preset  
using that number button. Repeat for each  
button, in each band.  
To tune to a preset channel—Select the  
band you want, then press the desired  
preset button (1-6).  
To play each of your preset channels  
for a few seconds—Press AMS. Press  
AMS again to play a station while it is  
being previewed.  
badly to play, it must be  
replaced.  
No sound  
Mute on.  
Press the MUTE button  
to cancel mute.  
Volume adjusted too  
low.  
Adjust the volume  
upwards.  
Memory  
contents lost  
Unknown.  
Disconnect, then  
reconnect the power  
wire or battery. Press  
the RESET button.  
CD cannot be Another CD is already  
inserted  
Press the EJECT  
button to remove  
the other CD.  
Press the RESET  
button and try  
again.  
loaded into the player.  
CD skips  
during play  
Dirty or damaged disc. Clean the disc. If the  
disc is damaged too  
badly to play, it must be  
replaced.  
4 To turn the player off, press and hold  
(power), or PWR on the remote control, until  
it turns off.  
Poor radio  
reception  
The antenna may not be Fully extend the  
fully extended or  
antenna.  
correctly connected.  
Check the antenna  
connections.  
Choosing local or distant stations  
The antenna is broken. Replace the antenna.  
To choose local or distant stations:  
The antenna is poorly  
grounded.  
Check the antenna  
ground and repair it if  
necessary.  
1 In radio mode, press LOC on the remote  
control to receive only local stations (the  
default setting is DX) . “LOC” appears on the  
LCD and weak or distant stations are  
ignored.  
Note  
If any problem persists after checking the above list, consult  
your nearest service dealer. Never attempt to disassemble  
the unit by yourself.  
2 Press LOC again to receive both local and  
distant stations. “DX” appears on the LCD  
and all stations are received.  
Playable discs  
Using your player in the AUX In mode  
Your CD deck can only play the following discs:  
To use your CD deck with an external audio  
device:  
Disc type Label  
Material  
Size  
CD  
Sound  
12 cm  
1 Press  
(power), or PWR on the remote  
control, to turn on the player.  
2 Connect an optional portable audio source to  
MP2  
Sound  
12 cm  
the AUX In jack on the front panel.  
3 Press MODE repeatedly to select AUX In.  
4 Play music on the device to listen to it  
through your car speakers.  
Troubleshooting  
Caution  
Do not try to repair the CD car deck yourself. Doing so will  
void your warranty.  
Problem  
Possible cause  
Solution  
No sound or  
power  
Volume too low.  
Turn up the volume.  
The fuse is blown.  
Replace the fuse. (Only  
use a replacement fuse  
with the correct value.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Insignia NS-C4113 Car CD Deck with USB Port  
Cleaning the connectors  
Maintaining your system  
If the connector between the head unit and the  
front panel is dirty, it may cause the player to  
operate poorly. To avoid such problems, open  
the front panel and clean the connectors on the  
head unit and the front panel with an alcohol  
swab. Clean the connections gently to avoid  
damaging them.  
Note  
The mechanical part of this player contains self-lubricating  
bearings and must not be oiled or lubricated.  
Replacing the fuse  
Make sure the amperage of the new fuse  
matches the specified value when replacing the  
fuse. If the fuse is blown, check the power  
connection and replace the fuse with a new one.  
If the same problem occurs, there may be a  
problem with your car’s electrical system. In  
such cases, please consult the nearest service  
dealer.  
Caution  
For safety, always turn your car off and remove  
the keys before cleaning.  
Never touch the connectors directly with your  
fingers.  
Head unit (in dashboard)  
Caution  
Never use a fuse with the rated amperage more than that  
supplied to your unit, otherwise it will damage the unit.  
Replacing the remote control battery  
When the remote control stops working, or the  
range gets very limited, replace the lithium  
battery with a new button cell (CR2025). Make  
sure of the battery polarity before replace.  
To replace the battery:  
1 Gently pull out the battery holder while  
pressing the latch.  
Front panel (open)  
Cleaning CDs  
Using a soft cleaning cloth, wipe the CD from the  
center outwards. If a CD is quite dirty, use a soft  
cloth slightly moistened with isoprophyl (rubbing)  
alcohol.  
2 Insert the battery into the battery holder with  
the positive (+) side up.  
3 Insert the battery holder into the remote  
control.  
Precautions when using lithium batteries  
Always keep the lithium batteries out of your  
childrens reach. In case a battery is  
swallowed, see a doctor immediately.  
Caution  
Do not use solvents such as benzene, thinners, commercial  
cleaning fluids, or anti-static sprays designed for vinyl  
records.  
Clean the battery with a dry cloth to make  
sure of a good connection.  
Make sure to install the battery with the  
correct polarity.  
To prevent a short circuit, do not use metal  
tweezers to hold the battery.  
Keep the following in mind:  
Treat the disc carefully. Handle the disc only  
by its edges. Never allow your fingers to  
come in contact with the shiny, unprinted side  
of the disc.  
Do not attach adhesive tape or stickers to the  
disc label.  
If a disc skips or gets stuck on a section of  
the disc, it is probably dirty or scratched.  
Discs should be stored in their cases after  
each use to avoid damage.  
Warning  
Improper handling of the battery may result in an explosion.  
Do not charge it, disassemble it, or throw it into a fire.  
Do not expose discs to direct sunlight, high  
humidity, high temperatures and dust.  
Prolonged exposure or extreme  
temperatures can warp the disc.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Insignia NS-C4113 Car CD Deck with USB Port  
Do not affix labels to or write anything on  
either side of the disc. Sharp writing  
instruments or ink may damage the surface.  
Note  
A disc may became somewhat scratched (although not  
enough to make it unusable) depending on how it is  
handled. These scratches are not an indication of any  
problem with the player.  
CEA 2006 Power Output: 17 Watts RMS x 4  
Channels at 4 Ohms and 1% THD+N  
CEA 2006 Signal to Noise Ratio: 80 dBA  
(reference: 1 Watt into 4 Ohms)  
Specifications  
GENERAL  
Supply voltage  
Load impedance  
Max power output  
Tone controls  
14.4 V DC (11-16 V allowed)  
4 ohms per channel  
40 W × 4  
± 8 dB  
Bass 100 Hz  
Treble 10 KHz  
Dimensions (approx.)  
Mounting (approx.)  
Weight (approx.)  
7.56 × 7 × 1.97 inches  
(192 × 178 × 50 mm) (d/w/h)  
6.65 × 7.16 × 2.1 inches  
(169 × 182 × 53 mm) (d/w/h)  
3.86 lbs. (1.75 kg)  
FM tuner  
Frequency range  
IF  
87.5 ~ 107.9 MHz (USA)  
10.7 MHz  
Usable sensitivity  
Signal-to-noise ratio  
Stereo separation  
15 dBuV  
50 dB  
30 dB (1 KHz)  
AM tuner  
Frequency range  
IF  
530 ~ 1710 KHz (USA)  
450 KHz  
Usable sensitivity  
CD player  
28 dBuV (-20 dB)  
Signal-to-noise ratio  
Separation  
65 dB (1 KHz)  
60 dB (1 KHz)  
0.5%  
Distortion  
Due to continuous product improvement, specifications and  
design are subject to change without prior notice.  
Legal notices  
© 2008 Insignia. Insignia and the Insignia logo are  
trademarks of Best Buy Enterprise Services, Inc. Other  
brands and product names are trademarks or registered  
trademarks of their respective holders. Specifications and  
features are subject to change without notice or obligation.  
For service and support call (877) 467-4289.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Insignia NS-C4113 Car CD Deck with USB Port  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Insignia NS-C4113 Car CD Deck with USB Port  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number  
has been altered or removed  
One-Year Limited Warranty  
Insignia Products (“Insignia”) warrants to you, the  
original purchaser of this new NS-C4113 (“Product”),  
that the Product shall be free of defects in the original  
manufacture of the material or workmanship for a period  
of one (1) year from the date of your purchase of the  
Product (“Warranty Period”). This Product must be  
purchased from an authorized dealer of Insignia brand  
products and packaged with this warranty statement.  
This warranty does not cover refurbished Product. If you  
notify Insignia during the Warranty Period of a defect  
covered by this warranty that requires service, terms of  
this warranty apply.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS YOUR EXCLUSIVE REMEDY.  
INSIGNIA SHALL NOT BE LIABLE FOR ANY  
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
THE BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY ON THIS PRODUCT, INCLUDING, BUT  
NOT LIMITED TO, LOST DATA, LOSS OF USE OF  
YOUR PRODUCT, LOST BUSINESS OR LOST  
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE  
PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT  
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF  
AND CONDITIONS OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE  
LIMITED IN DURATION TO THE WARRANTY PERIOD  
SET FORTH ABOVE AND NO WARRANTIES,  
WHETHER EXPRESS OR IMPLIED, WILL APPLY  
AFTER THE WARRANTY PERIOD. SOME STATES,  
PROVINCES AND JURISDICTIONS DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU  
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO  
HAVE OTHER RIGHTS, WHICH VARY FROM STATE  
TO STATE OR PROVINCE TO PROVINCE.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the  
date you purchased the Product. The purchase date is  
printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of  
the material or workmanship of the Product is  
determined to be defective by an authorized Insignia  
repair center or store personnel, Insignia will (at its sole  
option): (1) repair the Product with new or rebuilt parts;  
or (2) replace the Product at no charge with new or  
rebuilt comparable products or parts. Products and parts  
replaced under this warranty become the property of  
Insignia and are not returned to you. If service of  
Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This  
warranty lasts as long as you own your Insignia Product  
during the Warranty Period. Warranty coverage  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.  
55423-3645  
terminates if you sell or otherwise transfer the Product.  
© 2008 Best Buy Enterprise Services, Inc.  
All rights reserved. INSIGNIA is a trademark of Best Buy  
Enterprise Services, Inc. Registered in some countries.  
All other products and brand names are trademarks of  
their respective owners.  
How to obtain warranty service?  
If you purchased the Product at a retail store location,  
take your original receipt and the Product to the store  
you purchased it from. Make sure that you place the  
Product in its original packaging or packaging that  
provides the same amount of protection as the original  
packaging. If you purchased the Product from an online  
web site, mail your original receipt and the Product to the  
address listed on the web site. Make sure that you put  
the Product in its original packaging or packaging that  
provides the same amount of protection as the original  
packaging.  
To obtain in-home warranty service for a television with a  
screen 25 inches or larger, call 1-888-BESTBUY. Call  
agents will diagnose and correct the issue over the  
phone or will have an Insignia-approved repair person  
dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the  
product in the United States, Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning  
strikes  
Accident  
Misuse  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product, including  
the antenna  
Plasma display panel damaged by static  
(non-moving) images applied for lengthy periods  
(burn-in).  
This warranty also does not cover:  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility  
authorized by Insignia to service the Product  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
(877) 467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, MN USA 55423-3645  
© 2008 Best Buy Enterprise Services, Inc.  
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.  
ENGLISH  
08-1535  
All other products and brand names are trademarks of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer WIL 144 SP User Manual
Insignia Handheld TV 10 0499 User Manual
Insignia TV DVD Combo NS LTDVD26 09 User Manual
Insignia Two Way Radio NS F1112 User Manual
Jet Tools Drill JDP 20VS User Manual
JOBO Digital Photo Frame Photo Frame User Manual
Kambrook Fan KFA815 User Manual
Kenwood Cassette Player KRC 791 User Manual
Kenwood GPS Receiver DNN9150BT User Manual
King Canada Lathe CH 900C User Manual