User Guide
55" LED TV
NS-55D550NA15
Before using your new product, please read these instructions to prevent any damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Connect a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connect a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connect headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connect a basic home theater system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Analog audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Connect power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Use the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Install remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Aim the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Turn on your TV for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Turn your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
On-screen menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Select a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Adjust the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
View channel information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Use a Roku Streaming Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connect and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Use an MHL-enabled device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Connect and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Switch back to a connected device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Use INlink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Turn INlink on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Turn Device Auto Power Off on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Turn TV Auto Power On on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Turn Audio Receiver on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Display a list of INlink-compatible devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Select an INlink-compatible device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Open an INlink-compatible device’s root menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Use a USB flash drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Switch to USB mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Browse photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
View favorite photos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
View photos in a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Customize slideshow settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Adjust the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Automatically adjust the aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Adjust the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Adjust sound settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Select the audio out mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Play TV audio only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Change channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Automatically scan for channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Hide channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
View a favorite channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Add or change a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Check the digital signal strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Set parental controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Set or change the password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Lock control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Download rating information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Use closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Select the analog closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Select the digital closed captioning mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Adjust time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Set the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Set the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Adjust menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Label an input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Turn Input Sensor on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Clean the TV cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Clean the TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Restore settings to the defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
View system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Update the TV firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Video and audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Roku Streaming Stick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
MHL-enabled device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
INlink (CEC-compatible) device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Program universal remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Common universal remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
One-year limited warranty - Insignia Televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
v
Download from Www.Somanuals.com. All Manuals Search And Download.
CHILD SAFETY
It makes a difference how and where you use
your flat panel display
As you enjoy your new product, keep these
safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or
carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
Carefully read and understand all enclosed instructions
for proper use of this product.
Don’t let children climb on or play with entertainment
system furniture and TVs.
Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
Remember that children can become excited while
watching a program, especially on a “larger-than-life” TV.
Make sure that you place or install the TV where it cannot
be pushed, pulled over, or knocked down.
•
Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
Wall mounting
If you decide to wall mount your TV, always remember:
•
One size of wall mount does not fit all. Use only a wall mount rated for the weight of
your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory as suitable for your TV.
•
•
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•
Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks. If
you are unsure, ask a professional installer.
•
TVs can be heavy. At least two people are required for safe wall mount installation.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
Important Safety
Instructions
CAUTION
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
RISK OF ELECTRIC SHOCK
15 The wall plug is the disconnecting device. The
DO NOT OPEN
plug must remain readily operable.
16 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
17 The apparatus should not be exposed to
dripping or splashing, and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
This symbol indicates that
dangerous voltage
constituting a risk of electric
shock is present within your TV.
This label is located on the
back of your TV.
WARNING
This symbol indicates that
there are important operating
and maintenance instructions
in the literature accompanying
your TV.
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
Lightning
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from
lightning and power line surges.
Power lines
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, take extreme care to keep
from touching such power lines or circuits as
contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop
your TV or hit, jolt, or press hard against the LCD
panel. If the screen breaks, be careful of broken
glass.
• If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
Replacement parts
When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15
Safety check
Antenna lead-in wire
Grounding clamp
1
2
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV is in correct
operating condition.
Antenna discharge
unit
3
Grounding conductors
Power source
4
5
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult
an electrician or your local power company.
Ground clamps
Power service
grounding electrode
system
Electric service
equipment
6
7
Servicing
These servicing instructions are for use by qualified
service personnel only. To reduce the risk of electric
shock, do not perform any servicing other than that
contained in the operating instructions unless you
are qualified to do so.
Note to CATV system installer
Article 820 of the National Electrical Code,
ANSI/NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding
system of the building as close to the point of cable
entry as practical.
CAUTION
Damage requiring service
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under the
following conditions:
Condensation
• When the power supply cord or plug is damaged
Moisture will form on the TV if the TV is brought
from cool surroundings into a warm room or if the
temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired. To
prevent this, let the TV stand in its new
or frayed.
• If liquid has been spilled or objects have fallen
into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following
the operating instructions. Adjust only those
controls covered by the operating instructions
because incorrect adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to restore
your TV to its normal operation.
surroundings for about an hour before switching it
on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if
the TV is exposed to the breeze from an air
conditioner. In such cases, change the location of
the TV.
• If your TV has been dropped or damaged in any
Mobile telephone warning
way.
To avoid interference with your TV picture and
sound, operating problems, or even damage, keep
your cordless and cellular telephones away from
the TV.
• When your TV exhibits a distinct change in
performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected
to your TV, make sure that the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
End of life directives
Your TV may contain materials that are regulated
for environmental reasons. Your TV also contains
materials that can be recycled and reused. To help
protect the environment, contact your local
authorities for information about disposal or
recycling and about finding a recycler in your area
before you dispose of your TV.
ANSI/NFPA No. 70, provides information with
respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV, and are not
considered defects.
requirements for the grounding electrode.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Insignia 55" LED TV
INlink
Introduction
Enjoy the benefit of having HDMI CEC compatible
products plug and play! No setup is needed! CEC
technology lets different devices discover and
instructions on how to use INlink.)
Congratulations on your purchase of a high-quality
Insignia product. Your NS-55D550NA15 represents
the state of the art in LED TV design and is designed
for reliable and trouble-free performance.
DTS Sound™
MHL™
DTS Sound delivers clear, crisp, and natural sound
while providing deep enveloping bass.
Connect your MHL-enabled device, such as a cell
phone or Roku Streaming Stick™, and view your
device’s screen on your TV. Supports 1080p HD
video and 5.1 digital surround sound playback from
your mobile device. (Requires an MHL-enabled
phone or tablet and an MHL cable.) (See page 25 for
connection instructions.)
Insignia Motion 120Hz
With a 120 Hz screen refresh rate twice the rate of a
60 Hz screen, a screen with 1,080 lines of resolution
and special motion-detection technology, you will
experience a picture with clearer detail and
brightness, smoother transitions, and reduced
motion blurring, particularly when watching
fast-motion sports and action scenes. (See the
Insignia Motion 120Hz option in “Adjust the TV
picture” on page 52 for instructions on how to
adjust the TV picture.)
Roku Ready®
Your Insignia TV is certified to work with the Roku
Streaming Stick® (sold separately) to instantly
stream 1000+ entertainment channels, including
Netflix, M-GO, HBO GO, Hulu Plus, WatchESPN,
Vudu, Amazon Instant Video, Pandora, PBS, and
many more. Operate the Streaming Stick with your
TV remote or a mobile device —it’s that simple! Just
plug the Streaming Stick into the purple MHL port
on your TV and enjoy. Roku requires high-speed
Internet and WiFi. (See page 24 for connection
instructions.)
Game mode
Video games generally require adjustments to the
television picture settings to get the maximum
experience. By simply pressing a button on your
remote control, your television settings will
automatically adjust for video games. It couldn't be
easier. (See the Game option in “Adjust the TV
picture” on page 52 for instruction on how to select
Game mode.)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Install the stand or wall-mount bracket
Notes
•
•
If you plan to wall-mount your TV, do not install the stand.
Store the stand and stand screws in case you decide to use the stand in
the future.
Install the stand
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 Align the front of the stand column with the front of the TV stand, then insert the column into the stand making
sure that the grooves in the column align with the ridges in the stand.
Front
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
3 Secure the column to the stand with four provided M5 × 12 mm screws.
Screw type
Screw length
# of screws
M5
12 mm
4
4 Slide the stand cover onto the stand column, then secure the back of the cover to the column using two
provided M5 × 12 mm screws.
Screw type
Screw length
# of screws
M5
12 mm
2
Stand cover
Stand column
Front
Back
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
5 Secure the front of the stand cover to the stand column using two provided ST4 × 14 mm screws.
Screw type
Screw length
# of screws
ST4
14 mm
2
Front
6 Secure the stand cover to your TV using four provided M5 × 12 mm screws.
Screw type
Screw length
# of screws
M5
12 mm
4
Front
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Install a wall-mount bracket
Warning
This TV is intended to be supported by a UL Listed wall mount bracket with
suitable weight/load. (See “Miscellaneous” on page 80.)
1 Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If the TV stand is attached, remove the four screws that secure the stand cover to the TV, then remove the stand.
3 Insert the four provided spacers into the mount screw holes on the back of your TV.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
4 Attach the wall-mount bracket to your TV using either the four provided M6 × 45 mm screws or the screws that
came with the wall-mount bracket. See the instructions that came with the wall-mount bracket for information
about which screws to use and how to correctly hang your TV.
Notes
•
The length of the wall-mount screws vary depending on the wall-mount
bracket you purchased. See the instructions that came with the
wall-mount bracket for screw lengths.
•
The mounting holes on the back of your TV take type M6 screws.
15.75 in. (400 mm)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Right side buttons
TV components
Package contents
• 55" LED TV
• Remote control and batteries (2 AAA)
• Stand column
• Stand cover
• TV stand
• M5 screws (12 mm length) (10 pcs)
• ST4 screws (14 mm length) (2 pcs)
• Spacers (4 pcs.)
• M6 spacer screws (45 mm length) (4 pcs)
• Power cord
• Quick Setup Guide
• Important Information
Front
#
Item
Description
Press to open the on-screen
menu. For more information, see
“Navigate the menus” on
page 41.
1
MENU
Press one or more times to select
the video input source your want,
then wait a few seconds. Your TV
switches to the source you
selected. For more information,
see “Select the video input
source” on page 40.
2
INPUT
In menu mode, press to confirm
selections.
Press to increase or decrease the
volume.
Press to go to the next or previous
channel in the channel list. For
more information, see “Select a
channel” on page 42.
Press to turn your TV on or off
(standby mode).
Warning: When your TV is off,
power still flows through it. To
completely disconnect power,
unplug the power cord.
3
4
VOL+/VOL–
CH /CH
#
Item
Description
Turns off when your TV is on.
Lights red when your TV is off
(standby mode).
Receives signals from the remote
control. Do not block.
1
Power indicator
Remote control
sensor
2
5
(power)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Left side jacks
#
Item
Description
Connect an HDMI device to this
jack. For more information, see
“HDMI (best)” on pages 15, 21, 26,
or 29.
OR
5
HDMI3/DVI
Connect the video for a DVI
device to this jack. For more
HDMI but requires an audio
connection)” on pages 16 or 30.
Connect an HDMI device to this
jack. For more information, see
“HDMI (best)” on pages 15, 21, 26,
or 29.
OR
Connect an MHL-enabled device,
such as a cell phone or Roku
Streaming Stick®, to this jack to
view your device’s screen on your
For more information about MHL,
see “Connect an MHL-enabled
device” on page 25 and “Use an
MHL-enabled device” on page 44.
For more information about Roku,
see “Connect a Roku Streaming
Stick” on page 24 and “Use a Roku
Streaming Stick” on page 43.
6
HDMI2/MHL
#
Item
Description
Connect headphones, a sound
bar, analog audio amplifier, or a
home theater system to this jack
to listen to TV audio through
external speakers. For more
information, see “Analog audio”
on page 34.
1
/AUDIO OUT
Connect a sound bar, digital
audio amplifier, or home theater
system to this jack to listen to TV
audio through external speakers.
For more information, see “Digital
audio” on page 33.
DIGITAL OUTPUT
(Optical)
2
Connect the audio for a DVI
device to this jack. For more
information see, “DVI (same as
HDMI but requires an audio
connection)” on pages 16 or 30.
Connect an antenna or cable TV
to this jack. For more information,
see “Coaxial (good)” on page 19
or “Connect an antenna or cable
TV (no box)” on page 20.
3
4
DVI AUDIO IN
ANT/CABLE IN
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Back
#
Item
Description
Connect a USB flash drive to this
jack to view compatible JPEG
picture files. For more
information, see “Connect a USB
flash drive” on page 31 and “Use a
USB flash drive” on page 49.
1
USB
The component video and AV
(composite video) jacks are
shared. You can connect only one
component video or AV device at
a time.
Connect the video for a
component video device to the
VIDEO/Y, PB, PR jacks. For more
information, see “Component
video (better)” on page 17, 22, or
27.
VIDEO/Y, PB, PR
OR
VIDEO/Y
2
OR
Connect the video for an AV
(composite video) device to the
VIDEO/Y jack. For more
28.
Connect the audio for a
component video device to these
jacks. For more information, see
“Component video (better)” on
page 17, 22, or 27.
OR
3
4
AUDIO L and R
Connect the audio for an AV
(composite video) device to these
jacks. For more information, see
“AV (composite video) (good)” on
page 18, 23, or 28.
Connect an HDMI device to this
jack. For more information, see
“HDMI (best)” on pages 15, 21, 26,
or 29.
HDMI1/ARC
OR
Connect an ARC-enabled home
theater receiver to this jack.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Remote control
#
Button
Description
Press to open the Favorite channel list. See “Set up a favorite
channel list” on page 59 and “View a favorite channel” on
page 59.
FAVORITE
10
INlink—Press to control INlink-compatible (HDMI CEC)
devices. See “Use INlink” on page 45.
USB—Press to control a photo slideshow. See “View photos
in a slideshow” on page 51.
Media controls
11
—Press to control a movie or show that is streaming
Streaming Stick” on page 43.
Press to open the INPUT SOURCE list, press
S
or
T
on the
INPUT
remote control to select the video input source, then press
12
13
ENTER. See “Select the video input source” on page 40.
TV—Press to return to the previous channel.
(return)
—Press to replay the last 10 seconds of video.
TV menus—Press to navigate in on-screen TV menus and
to adjust settings.
14 S T W X
—Press to navigate in Roku screens.
MHL—Press to open a connected MHL device’s home menu.
Stick’s home screen.
15
(home)
TV—Press to display TV status information, such as the
channel number, channel name (if available), or signal
source. See “View channel information” on page 42.
—Press to access special Roku options when a Roku
Streaming Stick is plugged in.
16 INFO*
Press to turn closed captioning on or off. You can select CC
Off, CC On, or CC On when mute. See “Turn closed
captioning on or off” on page 65.
17 CCD
TV—Press to mute the sound. Press again to restore the
sound.
18 MUTE
the sound.
Press to change TV channels. See “Select a channel” on
page 42.
19 CH /CH
Analog programs—Press to select the audio mode for an
analog program. You can select:
#
Button
Description
•
•
Mono—Select this option if there is noise or static
on weak stereo broadcasts.
Press to turn your TV on or off (standby mode).
Warning: When your TV is off, power still flows through it.
To disconnect power, unplug the power cord.
broadcast in stereo.
SAP—Select this option to listen to a secondary
audio program, if available.
1
(power)
20 MTS/SAP
Press to enter channel numbers and the parental control
password.
Numbers
2
3
Digital programs—Press to select the audio language for
a digital program, if alternate languages are available.
Press to enter a digital sub-channel number. See “Select a
channel” on page 42.
Standard, Energy Savings, Movie, Game, or Custom.
See the Picture Mode option in “Adjust the TV picture” on
page 52.
21 PICTURE
22 AUDIO
TV menus—Press to confirm selections or changes in
on-screen TV menus.
—Press to confirm selections or changes on Roku
screens.
4
ENTER
Press to select the sound mode. You can select Standard,
Theater, Music, News, or Custom. See the Sound Mode
option in “Adjust sound settings” on page 55.
MENU
EXIT
Press to open the on-screen menu.
5
6
TV—Press to close the on-screen TV menu.
—Press to close a Roku menu or video.
Press to change how the picture looks on the screen (aspect
ratio). See the Aspect Ratio option in “Adjust the TV
picture” on page 52.
7
8
9
ASPECT
VOL+/–
SLEEP
Press to increase or decrease the volume.
Press to set the sleep timer. You can select Off, 5, 10, 15, 30,
60, 90, 120, 180, or 240 minutes. See “Set the sleep timer”
on page 69.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Connection
type and
jack
What connection should I
use?
Cable connectors
Your TV has several connection types for
connecting devices to your TV.
Optical digital
audio output
For the best video quality, you should connect a
device to the best available connection.
Use the following tables to identify cables:
Connection
Video
type and
jack
Cable connector
quality
Analog audio
input
HDMI
video/audio
Best (use this
if your devices
have HDMI)
3.5mm DVI
audio input
Component
video (requires
an audio
Better than
composite or
coaxial
connection)
3.5mm analog
audio output
AV (composite
video) (requires
an audio
You can use the HDMI3/DVI jack on your TV to
connect a DVI device to your TV. For more
information, see “DVI (same as HDMI but requires
an audio connection)” on page 16 or 30.
Better than
coaxial
connection)
Cautions
•
Check the jacks for position and type
before making any connections.
Loose connections can result in image or
color problems. Make sure that all
connections are tight and secure.
The external audio/video equipment
shown may be different from your
equipment. If you have questions, refer to
the documentation that came with your
equipment.
•
Coaxial
•
•
video/audio
Good
Always unplug the power cord when
connecting external equipment.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the
best connection type available. For more information, see “What connection should I use?” on page 14.
HDMI (best)
Side of TV
Cable or
satellite box
On your TV
HDMI cable
connector
HDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
DVI (same as HDMI but requires an audio connection)
Note
You must use the HDMI3/DVI jack to connect a cable or satellite box using
DVI. If you use another HDMI jack, you will not hear sound from the TV
speakers.
Side of TV
On your TV
Cable or
satellite box
Audio cable
HDMI cable
connector
Audio
connector
HDMI3/DVI
DVI AUDIO
IN jack
HDMI cable with
HDMI-DVI adapter
jack
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the cable to the HDMI3/DVI jack on the side of your TV.
5 Connect an audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT
jacks on the cable or satellite box.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
6 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
S
or
T
to highlight HDMI 3, then press ENTER.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Component video (better)
Note
Cables are often color-coded to match color-coded jacks.
Cable or
satellite box
On your TV
Back of TV
Component Audio cable
video cable connectors
connectors
Audio cable
Component
Analog
video jacks audio jacks
Component video cable
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on the back of your TV and
the component video out jacks on the cable or satellite box.
4 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the audio out
jacks on the cable or satellite TV box.
Notes
•
The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
•
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
5 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to highlight Component/AV, then press ENTER.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
AV (composite video) (good)
Notes
•
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
•
VIDEO/Y jack.
Cable or
satellite box
On your TV
Back of TV
AV
Audio cable
connectors
(composite
video) cable
connector
AV
Analog
AV cable (composite video cable)
(composite audio jacks
video) jack
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the green VIDEO/Y jack and AUDIO L and R jacks on the back of your TV
and to the AV (composite video) and audio out jacks on the cable or satellite box.
Notes
•
The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
•
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight Component/AV, then press ENTER.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Coaxial (good)
Side of TV
On your TV
Cable or
satellite box
Coaxial cable
connector
Coaxial cable
ANT/CABLE IN
jack
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the coaxial out
jack on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight TV, then press ENTER.
7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scan for channels” on
page 57.
Notes
•
Use a coaxial cable to eliminate interference and noise from radio
waves.
•
Do not bundle the coaxial cable with the power cord or other cables.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Connect an antenna or cable TV (no box)
Side of TV
On your TV
Antenna or cable TV
(no box)
Coaxial cable
connector
Coaxial cable
ANT/CABLE IN
jack
1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2 Connect a coaxial cable (not provided) to the ANT/CABLE IN jack on the side of your TV and to the antenna or
cable TV wall jack.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to highlight TV, then press ENTER.
6 If you cannot tune to channels you know exist, scan for channels. See “Automatically scan for channels” on
page 57.
Notes
•
Use a coaxial cable to eliminate interference and noise from radio
waves.
•
•
Do not bundle the coaxial cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service
personnel to correct the problem.
•
•
•
If the signal level for a channel is weak, the picture may be distorted.
Adjust the antenna or use a highly directional outdoor or set-top
antenna with a built-in amplifier.
If the picture quality is good on some channels and poor on others, the
problem may be caused by a poor or weak signal from the broadcaster
or cable TV provider.
If you connect to cable without a set-top box and experience poor
picture quality, you may need to install a set-top box to improve signal
reception and picture quality. Contact your cable provider about
upgrading to a set-top box.
Many high-definition (HD) channels upscale standard-definition (SD)
content. The picture displayed on your TV is still displayed as SD, thus
the picture quality will not be as clear or crisp as it would be if the
content was originally recorded in HD.
•
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see “What connection should I use?” on page 14.
HDMI (best)
Side of TV
On your TV
DVD or Blu-ray player
HDMI cable
connector
HDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Component video (better)
Note
Cables are often color-coded to match color-coded jacks.
DVD or Blu-ray player
On your TV
Back of TV
Component Audio cable
video cable
connectors
connectors
Component
Analog
video jacks audio jacks
Audio cable
Component video cable
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect a component video cable (not provided) to the VIDEO/Y, PB, and PR jacks on the back of your TV and to
the COMPONENT OUT jacks on the DVD or Blu-ray player.
3 Connect an audio cable (not provided) to the AUDIO L and R jacks on the back of your TV and to the L and R
AUDIO OUT jacks on the DVD or Blu-ray player.
Notes
•
The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
•
4 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
AV (composite video) (good)
Notes
•
•
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
VIDEO/Y jack.
DVD or Blu-ray player
On your TV
Back of TV
AV
Audio cable
connectors
(composite
video) cable
connector
AV
Analog
(composite audio jacks
video) jack
AV cable
(composite video cable)
1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an AV cable (not provided) to the green VIDEO/Y jack and AUDIO L and R jacks on the back of your TV
and to the AV OUT jacks on the DVD or Blu-ray player.
Notes
•
The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
•
3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to select Component/AV, then press ENTER.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Connect a Roku Streaming Stick
You can connect a Roku Streaming Stick® to your TV to enjoy streaming video and audio.
Note
You must use the purple HDMI2/MHL jack to connect a Roku Streaming
Stick.
Side of TV
Roku Streaming
Stick
1 Plug the Roku Streaming Stick (not provided) into the purple HDMI2/MHL jack on the side of your TV.
2 If your TV is turned on, press ENTER when a message appears. Your Roku Streaming Stick’s menu opens. (The
message may take about 20 seconds to appear.)
OR
If your TV is turned off, turn on your TV. Press
(home). Your Roku Streaming Stick’s menu opens.
Notes
You can also switch to Roku mode by:
•
•
Pressing INPUT and selecting HDMI2 (Roku)
Pressing MENU and selecting STREAMING
For instructions on using your Roku Streaming Stick, see “Use a Roku
Streaming Stick” on page 43.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect an MHL-enabled device
You can connect an MHL-enabled device, such as a cell phone, and view your device’s screen on your TV.
Note
You must use the purple HDMI2/MHL jack to connect an MHL-enabled
device.
Side of TV
On your TV
HDMI cable
connector
MHL-enabled
device
HDMI2/MHL
jack
MHL cable
1 Connect the small connector on an MHL cable (not provided) to the micro USB port on the MHL-enabled device.
2 Connect the other end of the cable to the purple HDMI2/MHL jack on the side of your TV.
3 Turn on the MHL-enabled device.
4 If your TV is turned on, press ENTER when a message appears. Your MHL-enabled device’s menu opens.
OR
If your TV is turned off, turn on your TV. Press
(home). Your MHL-enabled device’s menu opens.
Notes
You can also switch to MHL mode by:
•
Pressing INPUT and selecting HDMI2 (MHL/ACC)
•
Pressing MENU and selecting MHL/ACC
For instructions on using your MHL-enabled device, see “Use an
MHL-enabled device” on page 44.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Connect a game console
HDMI (best)
Side of TV
On your TV
Game
console
HDMI cable
connector
HDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the game console.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation
that came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Component video (better)
Note
Cables are often color-coded to match color-coded jacks.
Game
console
On your TV
Back of TV
Component
video cable
connectors
Audio cable
connectors
Component
video jacks
Analog
audio jacks
Console-specific component video and
audio cable
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect the video and audio connectors on the component video cable (not provided) to the VIDEO/Y, PB, and
P
R
video jacks and AUDIO L and R jacks on the back of your TV and to the component jack(s) on the game
console.
Note
•
•
•
Your game console may require a special component video cable. See
the documentation that came with your game console or check the
manufacturer’s website.
The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
When you connect the audio using the AUDIO L and R audio jacks, the
audio output is analog.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation
that came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
AV (composite video) (good)
Notes
•
•
Cables are often color-coded to match color-coded jacks.
The yellow video connector on the AV cable connects to the green
VIDEO/Y jack.
Game
console
On your TV
Back of TV
AV
Audio cable
(composite connectors
video)cable
connector
AV
Analog
audio jacks
(composite
video) jack
Console-specific AV cable
(composite video cable)
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect the video and audio connectors on the game console’s AV cable (not provided) to the green VIDEO/Y
jack and AUDIO L and R jacks on the back of your TV and to the composite jack(s) on the game console.
Note
•
•
•
Most game consoles come with a special AV (composite video) cable.
See the documentation that came with your game console or check the
manufacturer’s Web site.
The VIDEO/Y, PB, and PR video jacks (used to connect a component
device) share the AUDIO L and R jacks with the VIDEO/Y jack (used to
connect a composite device).
When you connect the audio using the AUDIO L and R jacks, the audio
output is analog.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation
that came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S
or
T
to select Component/AV, then press ENTER.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect a computer
HDMI (best)
Side of TV
On your TV
HDMI cable
connector
HDMI jack
HDMI cable
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the computer.
3 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
4 Press INPUT to open the INPUT SOURCE list.
5 Press
S
or
T
to highlight HDMI1, HDMI2, or HDMI3, then press ENTER.
6 Adjust the display properties on the computer, if necessary.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
DVI (same as HDMI but requires an audio connection)
Side of TV
On your TV
Audio cable
HDMI cable
connector
Audio cable
connector
HDMI jack
DVI AUDIO
IN jack
HDMI cable with
HDMI-DVI adapter
1 Make sure that your TV’s power cord is unplugged and the computer is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the
adapter to the DVI OUT jack on the computer.
3 Connect the other end of the cable to the HDMI3/DVI jack on the side of your TV.
4 Connect an audio cable (not provided) to the DVI AUDIO IN jack on the side of your TV and to the AUDIO OUT
(headphone) jack on the computer.
Note
When you connect the audio using the DVI AUDIO IN jack, the audio output
is analog.
5 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
S
or
T
to highlight HDMI3, then press ENTER.
8 Adjust the display properties on the computer, if necessary.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect a USB flash drive
Back of TV
USB flash drive
1 Plug a USB flash drive into the USB port on the back of your TV.
Caution
Do not remove the USB flash drive or turn off the TV while using the USB
flash drive. You may lose data or damage the USB flash drive.
2 If your TV is turned on when you connect the USB flash drive, press
appears. The PHOTOS menu opens.
S
or
T
to select Yes in the message that
OR
If you switch to a different video input source after you plug in the USB flash drive and want to switch back to
the drive, press INPUT to open the INPUT SOURCE list, press
The PHOTOS menu opens.
S
or
T
to select USB(Photos), then press ENTER.
Note
The Photos viewer only supports JPEG format images (with “.jpg” file
extensions) and not all JPEG files are compatible with your TV.
For more information, see “Use a USB flash drive” on page 49.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Connect headphones
When you connect headphones, the TV speakers are muted.
Warning
Loud noise can damage your hearing. When using headphones, use the
lowest volume setting on your headphones that still lets you hear the sound.
Side of TV
1 Connect the headphones to the /AUDIO OUT jack on the side of your TV.
2 In the screen that opens, press
W
or
X
to highlight Headphone, then press ENTER. For more information, see
“Select the audio out mode” on page 56.
Notes
•
If you connect headphones when your TV is turned off, then you turn on
your TV, the TV speakers are muted and the audio plays through the
headphones.
You can also connect a home theater system or sound bar to the
/AUDIO OUT jack.
•
32
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect a basic home theater system
You can connect a home theater system or sound bar to the digital audio jack.
Digital audio
Side of TV
On your TV
Home theater
system
Digital optical
audio cable
connector
Digital optical
audio cable
Sound bar
Digitaloptical
audio jack
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (Optical) jack on the side of your
TV and to the optical AUDIO IN jack on the digital home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Digital Audio/SPDIF option on the AUDIO menu to PCM. See the Digital Audio/SPDIF
option in “Adjust sound settings” on page 55.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Analog audio
When you connect a home theater system or sound to the /AUDIO OUT jack, the TV speakers are muted.
Side of TV
On your TV
Home theater
system
Audio cable
connector
Audio cable
Sound bar
/AUDIO OUT
jack
1 Make sure that your TV’s power cord is unplugged and the home theater system or sound bar is turned off.
2 Connect an audio cable (not provided) to the /AUDIO OUT jack on the side of your TV and to the AUDIO IN
jacks on the analog home theater system or sound bar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the home theater system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the home theater system or sound bar.
5 On your TV, set the Headphones/Audio Out option on the AUDIO menu to Headphones/Audio Out Variable
or Audio Out Fixed. See the Headphones/Audio Out option in “Adjust sound settings” on page 55.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Connect a home theater system with multiple devices
Cable or satellite box
DVD or Blu-ray player
AV receiver
Game console
USB flash drive
Antenna or cable
TV connected
directly to the
wall jack
Computer
The connections you make depend on the video and audio jacks available on your devices. Refer to the
documentation that came with your devices for connection information.
Just remember to use the best connection types available for the best picture and sound. For information about
connection types, see “What connection should I use?” on page 14.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Connect power
1 Connect the AC power cord to the power connector on the back of your TV.
2 Connect the other end of the cord to a power outlet.
Caution
•
Your TV should only be operated from the power source indicated on
the label.
•
Always unplug the AC power cord from the power outlet when you will
not be using your TV for an extended period of time.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Cautions
Use the remote control
•
Batteries should not be exposed to
excessive heat, such as sunshine, heat
registers, or fire.
Battery chemicals can cause a rash. If the
batteries leak, clean the battery
compartment with a cloth. If chemicals
touch your skin, wash immediately.
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Install remote control batteries
1 While pressing the release latch on the back of
•
the remote control, lift the battery
compartment cover off the remote control.
•
Notes
•
•
•
Do not mix batteries of different types.
Do not mix old and new batteries.
Remove batteries when the charge is
depleted.
•
If the remote control is not going to be
used for an extended period of time,
remove the batteries.
Aim the remote control
• Point the remote control towards the remote
sensor on the front of your TV. For the location
of the remote sensor, see “Front” on page 10.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
8 Press
S
X
or
T
to highlight Daylight Saving, then
Turn on your TV for the first
time
press
to access the setting.
9 Press
S
or
T
to select On (if your viewing area
observes Daylight Saving Time) or Off (if your
viewing area does not observe Daylight Saving
The first time you turn on your TV, the TV SETUP
wizard opens. The wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
Time), then press ENTER, MENU, or
10 If you selected Manual for Mode:
W.
11 Press
S
or
T
X
to highlight Year, Month, or Day,
then press
to access the setting. Press
S
or
T
to adjust the setting, then press ENTER.
12 Press or to highlight Time, then press
access the setting. Press or
1 Make sure that you have:
S
T
X
to
• Installed the remote control batteries. (See
page 37 for details.)
• Connected an antenna, cable TV, or satellite
TV. (See page 15 through 20 for details.)
• Connected the power cord. (See page 36 for
details.)
W
X
to highlight the
hour, minute, or AM/PM field, then press
S
or
T
to adjust the setting. When you are finished,
press ENTER.
13 When you have finished setting the time, press
ENTER. The What is your viewing environment
screen opens.
2 Press (power) to turn on your TV. The Choose
your Menu Language screen opens.
14 Press
S
or
T
to highlight Home Use Mode or
3 Press
S
or
T
to highlight the language you
Store Display Mode, then press ENTER.
want, then press ENTER. The time setting screen
opens.
If you selected Store Display Mode, a message
asks if you are sure you want this mode. Select
Yes to continue using Store Display Mode, or
select No to change your selection, then press
ENTER. Store Display Mode is not an energy
savings mode and will display a retail banner.
The Choose your TV Source screen opens.
4 Press
S
or
T
to highlight Mode, then press
X
to
access the setting.
5 Press or
S
T
to select Manual (to set the date
and time manually) or Auto (to set the date and
time automatically from a TV signal source
based on the time zone you select), then press
ENTER, MENU, or
W.
Note
If you select Auto, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.
6 Press
S
or
T
to highlight Time Zone, then press
X
to access the setting.
7 Press
S
or
T
to select your time zone. You can
select Eastern, Central, Mountain, Pacific,
Alaska, Hawaii, Atlantic, or Newfoundland,
then press ENTER, MENU, or
W.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
15 Press
S
or
T
to highlight Antenna, Cable, or
B
If you select Cable, a message asks if you
have a cable box:
Satellite Box, then press ENTER.
A
If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
• Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
C
If you select Satellite Box, a message asks
how you connected the satellite box to your
TV:
Understand the basics
Turn your TV on or off
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator turns red.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
• Select HDMI, Component, or AV, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
Select the video input source
Note
Note
Your TV automatically detects and displays
which video jacks have devices connected
to them when the devices are turned on.
You can turn this feature off to always
display all inputs. For more information,
see “Turn Input Sensor on or off” on
page 70.
You can press EXIT to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
4 To watch TV, press INPUT, press
S
or
T
to
highlight the video input source for your TV in
1 Turn on your TV.
the INPUT SOURCE list, then press ENTER.
2 If you want to use a device connected to a video
input (such as a DVD or Blu-ray player), turn on
the device.
• If your TV is connected to an antenna,
cable TV (no box), or cable or satellite TV
box using a coaxial cable, select TV.
• If your TV is connected to a cable or
satellite box using an HDMI cable or HDMI
cable with a DVI adapter, select HDMI 1,
HDMI 2, or HDMI 3.
3 Press INPUT. The INPUT SOURCE list opens.
• If your TV is connected to a cable or
satellite box using a component video
cable, select Component/AV.
• If your TV is connected to a cable or
satellite box using an AV (composite video)
cable, select Component/AV.
4 Press
S
or
T
to select a video input source, then
press ENTER.
Note
If Auto Inut Sensing is turned on, the
INPUT SOURCE list displays Component
when a component video device is
connected or displays AV when a
composite video device is connected. For
more information, see “Turn Input Sensor
on or off” on page 70.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
SETTINGS menu (TV mode)
On-screen menu overview
Notes
•
Depending on the signal source
selected, you may see different
options on your screen.
•
•
•
Menu items that are not selectable are
grayed out.
Menus in this manual are described in
TV mode, unless otherwise indicated.
The screens shown in this manual are
for explanation purposes and may
vary from the actual screens on your
TV.
PHOTOS menu (USB mode)
PICTURE menu (TV mode)
AUDIO menu (TV mode)
CHANNELS menu (TV mode)
Navigate the menus
Press MENU to open the on-screen menu.
Press the right or left arrow to move the
cursor on the screen or to adjust a selected
item.
Press the up or down arrow to select menu
options.
Press ENTER to confirm a selection or enter a
sub-menu.
Press MENU to return to the previous menu.
Press EXIT to close the menu.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Select a channel
Adjust the volume
• Press CH
channel on the memorized channel list.
or CH to go to the next or previous
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press the number buttons to enter the channel
number you want, then wait for the channel to
change or press ENTER to immediately change
the channel.
• Press MUTE to turn off the sound. Press MUTE
again to turn the sound back on.
View channel information
buttons to select the main digital channel, press
(sub-channel), then press the number button
for the sub-channel. Wait for the channel to
change, or press ENTER to immediately change
the channel. For example, to tune to channel 5.1,
press 5, (sub-channel), then 1.
• Press INFO* to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal
type, audio information, resolution, current
time, signal strength, day of the week, date
and current program start and end times, if
provided by the broadcaster.
Note
Button presses must be within three
seconds of each other.
• Analog channel information—Displays
channel number, channel label (if present),
signal type, audio information, day of the
week, date, and resolution, if provided by the
broadcaster.
• Press
(return) to go to the last viewed channel.
• Press FAVORITE to open the favorite channel list,
press
S
or
T
to highlight a channel, then press
ENTER. For information about setting up a
favorite channel list, see “Set up a favorite channel
list” on page 59.
Note
If a list has more than one page, press
to scroll through the pages.
S
or
T
42
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
3 Use the following buttons to navigate on your
Use a Roku Streaming Stick
Roku Streaming Stick:
You can connect a Roku Streaming Stick and enjoy
streaming video and audio.
Note
•
You can purchase a Roku Streaming
www.bestbuy.ca, or
Replay 10
seconds of
video.
Return to the
Roku home
screen.
•
You must use the purple HDMI 2/MHL
jack to connect a Roku Streaming
Stick.
Navigate Roku
screens.
Access special
options.
Close a menu or
video.
Connect and use
1 Connect a Roku Streaming Stick to your TV. For
connection instructions, see “Connect a Roku
Streaming Stick” on page 24. A message tells
you the stick is connected.
2 Press ENTER to access your Roku Streaming
Control a movie
or show.
Stick. Your stick’s menu opens.
Note
Your Roku Streaming Stick’s menu will
vary depending on the content you have
loaded on the device.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Switch back to the Roku Streaming Stick
Use an MHL-enabled device
• Press
(home).
OR
You can connect your MHL-enabled device, such as
a cell phone, and view your device’s screen on your
TV.
Press INPUT, press
S
or
T
to select
HDMI 2(Roku), then press ENTER.
Note
You must use the purple HDMI 2/MHL
jack to connect an MHL-enabled device.
Connect and use
1 Connect an MHL-enabled device to your TV. For
connection instructions, see “Connect an
MHL-enabled device” on page 25. A message
tells you the device is connected.
2 Press ENTER to access your MHL-enabled
device. Your device’s menu opens.
OR
Press MENU, then press
W
or
X
to highlight
Note
STREAMING, then press ENTER.
Your device’s menu will vary depending on
the device and the Apps you have loaded
on the device.
Your stick’s menu opens.
Note
Your Roku Streaming Stick’s menu will
vary depending on the content you have
loaded on the device.
3 Use S T W X and ENTER to navigate on your
device.
Note
The buttons you use to navigate on your
device may vary depending on the device.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Switch back to a connected device
Use INlink
1 Press INPUT, then press
S
or
T
to select
HDMI 2(MHL/ACC).
INlink lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use INlink, you must set the INlink Control setting
on the SETTINGS · INLINK menu to On.
Notes
•
•
•
HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
The connected device’s HDMI CEC feature
must be turned on.
If you connect an HDMI device that is not
HDMI CEC-compatible, none of the
INlink Control features work.
OR
Press MENU, then press
MHL/ACC.
W
or
X
to highlight
•
Depending on the connected HDMI
device, some INlink Control features
may not work.
Turn INlink on or off
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
W
X
T
2 Press ENTER to access your MHL-enabled
device. Your device’s menu opens.
Note
Your device’s menu will vary depending on
the device and the Apps you have loaded
on the device.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S
or
T
to highlight INlink Control, then
to highlight On or Off, then press
press ENTER.
5 Press or
S
T
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Turn Device Auto Power Off on or off
Turn TV Auto Power On on or off
When INlink is set to On, Device Auto Power Off
automatically turns off HDMI CEC devices when you
turn off your TV.
TV Auto Power On automatically turns on your TV
when an HDMI CEC device is turned on, if the
device has this feature.
1 Press MENU. The on-screen menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight INlink, then press
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S
or
T
to highlight Device Auto Power
4 Press
S
or
T
to highlight TV Auto Power On,
Off, then press ENTER.
then press ENTER.
5 Press or
S
T
to highlight On (turns off the
5 Press or
S
T
to highlight On (turns on your TV
connected devices when you turn off your TV)
or Off (does not turn off the connected devices
when you turn off your TV), then press ENTER.
when you turn on the connected device) or Off
(does not turn on your TV when you turn on the
connected device), then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Turn Audio Receiver on or off
Display a list of INlink-compatible devices
When INlink is turned on and you have connected
an HDMI CEC-compatible audio receiver to your TV,
turning on Audio Receiver lets you use your TV’s
remote control to control the volume on the audio
receiver.
You can display a list of HDMI CEC devices that are
connected to your TV.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
3 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S
or
T
to highlight INlink Device Lists,
then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
4 Press
S
or
T
to highlight Audio Receiver, then
to highlight On (your TV’s remote
press ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
5 Press or
S
T
control controls the connected audio receiver’s
volume) or Off (your TV’s remote control does
not control the connected audio receiver’s
volume), then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Select an INlink-compatible device
Open an INlink-compatible device’s root
menu
When you have more than one INlink-compatible
device connected, you can select the device you
want to use.
You can open an INlink-compatible device’s root
menu, then use your TV’s remote control to control
the device, if the device has this feature.
1 Press INPUT, press
S
or
T
to highlight an HDMI
input, then press ENTER.
1 Press INPUT, press
S
or
T
to highlight the
INlink-compatible device you want, then press
2 Press MENU. The on-screen menu opens.
3 Press or to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
ENTER.
W
X
2 Press MENU. The on-screen menu opens.
T
3 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
4 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
4 Press
S
or
T
to highlight INlink, then press
ENTER. The SETTINGS · INLINK menu opens.
5 Press
S
or
T
to highlight Connect, then press
ENTER. A list of HDMI CEC-compatible devices
you have connected opens.
5 Press
S
or
T
to highlight Root Menu, then press
ENTER. The device’s root menu opens, and you
can use your TV’s remote control to control the
device.
6 Press
S
or
T
to highlight the device you want to
connect to, then press ENTER. A list of the HDMI
CEC-compatible devices you have connected
appears.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
7 Press
S
or
T
to highlight a device, then press
ENTER.
8 Press MENU to return to the previous menu, or
press EXIT to close the menu.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Browse photos
Use a USB flash drive
1 Switch to USB mode. See “Switch to USB mode”
on page 49. The PHOTOS menu opens.
You can connect a USB flash drive to your TV to
view compatible JPEG pictures.
Notes
•
•
Never remove the USB flash drive or
turn off your TV while viewing JPEG
pictures.
The JPEG picture viewer only supports
JPEG format images (with “.jpg” file
extensions) and not all JPEG files are
compatible with your TV.
Switch to USB mode
1 Make sure that you have connected the USB
2 Press
S
or
T
to highlight Browse Photos, then
flash drive to the USB port on your TV.
press ENTER. The screen displays folder names
and photo files stored on the USB flash drive in a
thumbnail index with the first folder or file
highlighted. A control bar appears at the
bottom of the screen.
2 If your TV is turned on when you connect the
USB flash drive, press
S
or
T
to highlight Yes in
the message that appears, then press ENTER.
The PHOTOS menu opens.
OR
Note
If you connected the USB flash drive, then
Photos are shown in the order they appear
on the USB flash drive. They may not be
listed in file name order.
changed to a different video input source, press
INPUT to open the INPUT SOURCE list, press
S
or
T
to highlight USB(Photos), then press ENTER.
The PHOTOS menu opens.
Note
To exit USB mode, press INPUT to open
the INPUT SOURCE list, then select another
input source.
3 To navigate the thumbnail index screen, press:
•
S T W or
folders.
X
to browse through the files and
• ENTER to view a highlighted photo full-screen
or open a highlighted folder.
• MENU or EXIT to open the PHOTOS menu.
• FAVORITE to add or remove a photo from the
favorite photo list. A heart appears on a photo
that has been added to the favorite photo list.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
When a photo is displayed full-screen, a control
View favorite photos
bar appears at the bottom of the photo. The file
name, picture resolution, size, and date are
displayed on the bottom of the control bar. If
you do not press a button within 10 seconds,
the control bar closes. Press INFO to open the
control bar again.
After you create your favorite photo list, you can
browse among your favorite photos quickly.
1 Switch to USB mode. See “Switch to USB mode”
on page 49. The PHOTOS menu opens.
2 Press
S
or
T
to highlight Favorite Photos, then
press ENTER. A thumbnail index of your favorite
photos opens with a control bar at the bottom
of the screen. A heart appears on a favorite
photo.
4 To navigate on the photo screen, press:
•
•
W
to go to the previous photo.
to go to the next photo.
X
• ENTER to rotate the photo clockwise.
Note
• ASPECT one or more times to enlarge the
Photos are shown in the order they appear
on the USB flash drive. They may not be
listed in file name order.
image by 2×, or 4× or to select Fill (to fill the
screen). You can press S T W or
photo.
X
to pan the
• EXIT to return to the thumbnail index.
• MENU to return to the PHOTOS menu.
You select photos and navigate on the photo
screen in the same way you do when you are
browsing through photos. For more
information, see “Browse photos” on page 49.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
View photos in a slideshow
Customize slideshow settings
You can view your photos in a slideshow.
You can customize the slideshow settings,
including Repeat, Shuffle, Speed, and Transition.
1 Switch to USB mode. See “Switch to USB mode”
on page 49. The PHOTOS menu opens.
1 Switch to USB mode. See “Switch to USB mode”
on page 49. The PHOTOS menu opens.
2 If the photos you want to view are in a folder on
the USB flash drive, select the folder. For
information about selecting a folder, see
“Browse photos” on page 49 or “View favorite
photos” on page 50.
3 Press MENU. The PHOTOS menu opens again.
2 Press
S
or
T
to highlight Settings, then press
ENTER. The PHOTOS · SETTINGS menu opens.
4 Press
S
or
T
to highlight View Slideshow, then
press ENTER. A slideshow starts with the first
photo in the current folder.
5 To control the slideshow:
Press...
MENU
To...
Press to open the PHOTOS
menu.
(previous) Return to the previous photo.
3 Press
S
or
T
to highlight an option, then press
(next)
Go to the next photo.
ENTER. You can select:
Pause the slideshow. Press
again to resume the
slideshow.
• Repeat—Repeats the slideshow when it
reaches the end. You can select On or Off.
ENTER
• Shuffle—Displays the slideshow photos in
random order. You can select On or Off.
• Speed—Sets the amount of time a photo is
displayed before the slideshow moves to the
next photo. You can select 4 Sec, 6 Sec, or
8 Sec.
• Transition—Selects the way photos transition
when moving to the next file in the slideshow.
You can select:
(pause)
Pause the slideshow.
When paused, press to
resume the slideshow.
X
(play)
(stop)
OR
EXIT
Press to stop the slideshow
and return to the thumbnail
index.
• None—No transition effect.
• Fade to Black—Fades the screen to black
between photos.
• Vertical Wipe—Wipes the screen from top
to bottom between photos.
• Horizontal Wipe—Wipes the screen from
left to right between photos.
• Random—Randomly selects a transition
effect.
4 Press EXIT to close the menu.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
• Movie—(a finely detailed picture). Adjusts
the brightness and contrast and lowers the
sharpness for a more realistic picture. This
selection is good for watching the highest
quality video such as Blu-ray Discs, DVDs,
and HDTV.
Adjust the picture
Adjust the TV picture
You can adjust various settings to improve the
quality of the TV picture. Also, you can reset all
picture settings to the factory default.
• Game—Adjusts the picture for the
ultimate gaming experience.
1 Press MENU. The on-screen menu opens with
Note
the PICTURE menu displayed.
Game is only available when the video
input is set to HDMI or Component/AV.
• Custom—(customized picture). Lets you
manually adjust picture settings such as
brightness, contrast, and sharpness.
Note
You can also press PICTURE to select the
picture mode.
• Backlight—Sets the overall brilliance of the
screen.
• Brightness—Adjusts the brightness of the
2 Press
3 Press
T
S
or ENTER to access the menu.
dark areas of the picture.
or
T
to highlight an option, then press
• Contrast—Adjusts the brightness of the light
areas of the picture.
ENTER to access the option. You can select:
• Color—Adjusts the color intensity of the
picture. A low setting may make the color look
faded. A high setting may make the color look
artificial.
• Tint—Adjusts the color balance of the picture.
Use this control to make skin tones look more
natural.
• Sharpness—Adjusts the color detail of
images. If you set this control too high, dark
images may appear with light or white edges.
• Picture Mode—Selects the picture mode. You
can select:
• Vivid—(a bright and vivid picture).
Significantly increases the contrast,
brightness, and sharpness. This selection is
good for video games, animation, and in
bright light environments.
• Standard—(a standard picture).
Moderately increases the contrast,
brightness, and sharpness. This selection is
good for standard TV broadcasts.
• Energy Savings—(the backlight
brightness is decreased). Your TV has a
backlight that provides light for displaying
a picture. By reducing the amount of light,
your TV uses less energy.
• Advanced Video—Opens the
PICTURE · ADVANCED VIDEO menu where you
can adjust additional video options.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
• Aspect Ratio—Adjusts how the picture
• Overscan—Extends text and images past
the screen edges to hide edge artifacts.
You can select On or Off.
• Dynamic Backlight (DCR)—Enhances the
contrast ratio between light and dark areas
of the picture. You can select Off, Low, or
High.
• Insignia Motion 120Hz—Reduces motion
blur and eliminates film judder with clear
detail and smooth motion. You can select:
fills the screen. You can select:
Aspect ratio
options
Example
Normal:
Displays the image in the
original aspect ratio. Black
bars appear if the image is
not in the widescreen (16:9)
aspect ratio.
• Off—Turns off motion enhancements.
• Smooth—Sets motion enhancements
to low.
• Ultra Smooth—Sets motion
enhancements to maximum to provide
fluid motion effects.
Zoom:
Expands the image to fill
the screen. The top and
bottom of the image may be
cropped.
• Color Temperature—Selects the color
temperature. You can select Cool (to
enhance the blues), Normal, or Warm (to
enhance the reds).
• Noise Reduction—Selects the noise
reduction mode to reduce picture noise
(snow). You can select Off, Low, Middle, or
High.
Wide:
Use this option to view
content recorded in a 16:9
(wide-screen) aspect ratio.
Cinema:
Stretches the image at the
edges, but keeps a clear
image in the center.
• Adaptive Contrast—Automatically
adjusts picture detail and brightness. You
can select On or Off.
• Reset Picture Settings—Resets all picture
settings to factory mode.
Auto:
4 Press
W
or
X
to adjust the option, or press
S
or
Automatically adjusts the
image based on the screen
size and the TV program.
Note: Auto is only
available when Auto
Aspect Ratio in the
CHANNELS menu is set to
On.
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press ASPECT to select the
aspect ratio.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Automatically adjust the aspect ratio
Set the power on picture mode
Auto Aspect Ratio automatically changes how the
picture looks on the screen (aspect ratio) based on
the TV program you are viewing.
You can set the picture mode your TV uses when
you turn it on.
1 Press MENU. The on-screen menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The SETTINGS menu opens.
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Reset to Default, then
3 Press
S
or
T
to highlight Auto Aspect Ratio,
press ENTER. The SETTINGS · RESET TO DEFAULT
then press ENTER.
menu opens.
4 Press or
S
T
to select On (automatically adjust
the aspect ratio) or Off (does not automatically
adjust the aspect ratio), then press ENTER.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to highlight Power on in Vivid
Mode, then press ENTER.
5 Press or
S
T
to highlight On (when you turn on
your TV, it will be in Vivid picture mode) or Off
(when you turn on your TV, it will be in the
picture mode it was in before you turned it off),
then press ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
• Digital Audio/SPDIF—Sends digital audio to
Adjust the sound
an external audio system. You can select:
• RAW (to pass through the original digital
audio sound).
• PCM (to output audio in 2-channel stereo).
Adjust sound settings
You can adjust sound settings to improve the sound
quality. You also can reset all sound settings to the
factory default.
• Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight AUDIO, then press
T
or
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
ENTER. The AUDIO menu opens.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.
• Audio Language Default—(Digital channels
only) Selects an alternate audio language, if
available.
• Headphones/Audio Out—You can use the
/AUDIO OUT jack on the side of your TV to
connect headphones, a home theater system,
or a sound bar. When a device is connected to
the /AUDIO OUT jack, the TV speakers are
muted. You can select:
3 Press
S
or
T
to highlight an option, then press
ENTER to access the option. You can select:
• Sound Mode—Selects the sound mode. You
can select:
• Standard—Balances treble and bass. This
setting is good for watching standard TV
broadcasts.
• Theater—Enhances treble and bass for a
rich sound experience. This setting is good
for watching DVDs, Blu-ray discs, and
HDTV.
• Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from the headphones,
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack.
• Music—Preserves the original sound. This
setting is good for listening to music.
• Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack to control the
audio.
• News—Enhances vocals for TV audio. This
setting is good for watching news
broadcasts.
• Custom—Lets you manually adjust sound
settings.
• Reset Audio Settings—Reset all audio
settings to factory defaults.
• Balance—Adjusts the balance between the
left and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• TV Speakers—Selects where to play TV audio.
When you connect headphones to your TV,
audio plays through both the headphones
and the TV speakers. You can select:
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
• Auto (default setting)—Automatically
turns off the TV speakers when you
connect a device to the /AUDIO OUT
jack. When the device is disconnected, the
TV speakers turn on automatically.
• On—Always plays the audio through the
TV speakers. If a device is connected to the
/AUDIO OUT jack, the audio is played
through both the TV speakers and the
device.
• Off—Turns off the TV speakers and plays
the audio only through the device
connected to the /AUDIO OUT jack. If
you disconnect the device, the TV speakers
remain turned off.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Select the audio out mode
Play TV audio only
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, a home theater system,
sound bar, or external speaker system to the
/AUDIO OUT jack on the side of your TV. The
following screen opens.
You can turn off the picture on your TV and listen to
the program audio only.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
2 Press
W
or
X
to highlight the audio out mode
3 Press
S
or
T
to highlight Audio Only, then
to select On.
you want to use, then press ENTER. You can
press ENTER.
select:
4 Press or
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
S
T
• Headphones/Audio Out
Variable—Select this option to use the
remote control that came with your TV to
control the audio from the headphones,
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack.
Notes
•
The picture turns off in about five
seconds.
•
Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.
• Audio Out Fixed—Select this option to
use the remote control that came with the
home theater system, sound bar, or
external speaker system you connected to
the /AUDIO OUT jack to control the
audio.
•
56
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Note
Change channel settings
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Automatically scan for channels
When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
B
If you select Cable Service, a message asks if
you have a cable box:
CH
or CH , your TV goes to the next or
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
3 Press
S
or
T
to highlight Auto Channel Search,
then press ENTER. The CHANNELS · AUTO
CHANNEL SEARCH screen opens.
• Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
4 Press
S
or
T
to highlight Antenna, Cable
Service, or Satellite Service, then press ENTER.
A
If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
C
If you select Satellite Service, a message
asks how you connected the satellite box to
your TV:
Hide channels
You can hide channels in the channel list. When you
press CH
or CH , your TV skips the hidden
channels. You can still tune to a hidden channel by
pressing the number buttons for the channel.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
• Select HDMI, Component, or AV, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
3 Press
S
or
T
to highlight Add/Skip Channels,
then press ENTER. The CHANNELS · ADD/SKIP
CHANNELS screen opens.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
4 Press S T W or
X
to highlight the channel you
want to hide, then press ENTER. The check mark
disappears.
Notes
•
•
•
If you highlight a channel in the list,
your TV displays the channel in the
background.
A channel with a check mark is not
hidden. A channel with no check mark
is hidden.
If the list has more than one page,
press
S
or
T
to scroll through the
pages.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Set up a favorite channel list
Add or change a channel label
You can create a favorite channel list so you can
quickly browse through your favorite channels by
pressing FAVORITE, then selecting a channel from
the favorite channel list.
If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
1 Press MENU. The on-screen menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
T
or ENTER. The CHANNELS menu opens.
3 Press
S
or
T
to highlight Channel Labels, then
3 Press
S
or
T
to highlight Favorites, then press
press ENTER. The CHANNELS · CHANNEL LABELS
screen opens with the channel number field
highlighted.
ENTER. The CHANNELS · FAVORITES screen
opens.
4 Press S T W or
X
to highlight the channel you
4 Press
S
or
T
to select the channel you want to
want to add to the favorites list, then press
ENTER. A check mark appears next to the
channel.
label, then press
field.
X
to move to the channel label
Notes
•
If you highlight a channel in the list,
your TV displays the channel in the
background.
•
To remove a channel from the
favorites list, highlight the channel,
then press ENTER. The check mark
disappears and the channel is
removed from the list.
•
If the list has more than one page,
press
S
or
T
to scroll through the
pages.
5 Press
or
S
or
T
to select a character, then press
W
X
to move to the previous or next character
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
position. Repeat this step to enter additional
characters. You can enter as many as 11
characters.
View a favorite channel
6 When you have completed the label, press
ENTER.
7 Press EXIT to close the menu.
1 Press FAVORITE. The favorite channel list opens.
2 Press
S
or
T
to highlight a channel, then press
ENTER.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Check the digital signal strength
Set parental controls
You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program
(with some exceptions, such as news and sports)
and deny access to programs that exceed the
ratings level you select. To watch programs that
exceed the selected rating, you must enter a
password.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight CHANNELS, then press
T
or ENTER. The CHANNELS menu opens.
Set or change the password
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Channel Strength,
then press ENTER. The Channel Strength screen
opens showing the signal strength meter.
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
4 Press MENU to return to the previous menu, or
press EXIT to close the menu.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
4 Press the number buttons to enter the four-digit
password. The default password is 0000. You
should change the password to a number you
can remember. The SETTINGS · PARENTAL
CONTROLS menu opens.
Lock control buttons
When the button lock is turned On, the buttons on
the side of your TV are locked, and you can only
operate your TV using the remote control.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
5 Press
S
or
T
to highlight Change Password,
then press ENTER. The SETTINGS · PARENTAL
CONTROLS · CHANGE PASSWORD screen opens.
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
6 Press the number buttons to enter a password,
then enter the password again. A message tells
you that the password has been changed.
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL
CONTROLS menu opens.
Note
If you forget your password, enter 9999.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
5 Press
S
or
T
to highlight Button Lock, then
to select On (locks the buttons) or
press ENTER.
6 Press
S
or
T
Off (unlocks the buttons).
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Block unrated TV
Set parental control levels
Some TV programs, such as news and sports shows
You can set parental controls for the U.S. and
Canada.
are not rated. When Block Unrated TV is turned on,
TV programs that do not have ratings are blocked.
When you try to watch a blocked program, you are
prompted to enter the parental controls password.
U.S. rating levels
U.S. TV ratings
1 Press MENU. The on-screen menu opens.
NONE
TV-Y
Not rated
All children
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
TV-Y7
TV-G
Suitable for children 7 and older
General audiences
TV-PG
TV-14
TV-MA
Parental guidance suggested
Parental guidance strongly suggested
Mature audiences only
Some of the age-based TV Parental Guidelines
ratings also have content-based ratings.
U.S. TV content ratings
All
FV
L
S
V
All ratings are blocked
Fantasy violence
Strong language
Sexual situations
Violence
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
D
Suggestive dialog
U.S. movie (MPAA) ratings
None
G
Movie not rated
General audiences
PG
PG-13
R
Parental guidance suggested
Suitable for children 13 and older
Parental guidance suggested for
children under 17
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
NC-17
X
Not suitable for children under 17
Adults only
Canadian rating levels
Canadian English ratings
E
C
C8+
G
Exempt programming
Suitable for all children
Suitable for children 8 and older
General audiences
PG
14+
18+
Parental guidance suggested
Suitable for children 14 and older
Adult only
5 Press
S
or
T
to highlight Block Unrated TV,
then press ENTER.
6 Press
S
or
T
to select On (to block unrated TV)
or Off (to unblock unrated TV).
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
5 Press
S
or
T
to highlight USA Parental Locks,
Canadian French ratings
then press ENTER. (To set Canadian ratings,
select Canadian Parental Locks.)
E
Exempt programming
G
General audiences
USA Parental Locks
8ans+
13ans+
16ans+
18ans+
Suitable for children 8 and older
Suitable for children 13 and older
Suitable for children 16 and older
Adult only
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETTINGS, then press
or ENTER. The SETTINGS menu opens.
W
X
T
Canadian Parental Locks
3 Press
S
or
T
to highlight Parental Controls,
then press ENTER. The Enter password screen
opens.
6 Press
W
or
X
to highlight:
• Movie Ratings or TV Ratings for USA ratings.
• Canadian English or Canadian French for
Canadian ratings.
7 Press
S
or
T
to select the rating. If a rating has
sub-ratings, press
sub-rating.
W
or
X
to highlight a
Note
When you block a rating, that rating and
all higher ratings are blocked.
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
8 Press ENTER to confirm. A lock symbol appears
when a rating is blocked.
9 Press MENU to return to the previous menu, or
press EXIT to close the menu.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
5 Press
S
or
T
to highlight RRT5, then press
Download rating information
ENTER. The SETTINGS · PARENTAL
If the program you are viewing has downloadable
CONTROLS · RRT5 screen opens. The screen that
opens may vary depending on the broadcaster.
rating information, you can download the
information to use when setting parental controls.
Note
If the program you are viewing does not
have RRT5 rating information, RRT5 is
grayed on the SETTINGS · PARENTAL
CONTROLS menu and cannot be selected.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
6 Press S T W or
X
to select the program and
content types you want to block, then press
ENTER. The SETTINGS · PARENTAL CONTROLS
menu opens.
7 To reset the RRT5 information to the factory
default, press
S
or
T
to highlight Reset RRT5.
3 Press
S
or
T
to highlight Parental Controls,
then press Enter. The Enter password screen
opens.
8 Press ENTER. A box opens.
9 Press or to highlight Yes or No, then press
ENTER.
S
T
10 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press the number buttons to enter the four-digit
password. The SETTINGS · PARENTAL CONTROLS
menu opens.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Select the analog closed captioning mode
Use closed captioning
Analog channels usually have one or more closed
captioning modes. The CC1 mode usually displays a
text version of the TV program audio in a small
banner. The other CC modes display information
provided by the broadcaster. The Text modes
display information in a box that covers half of the
screen.
Closed captioning displays a text version of the TV
program audio or displays information provided by
the broadcaster.
Turn closed captioning on or off
1 Press MENU. The on-screen menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Closed Caption, then
3 Press
S
or
T
to highlight Closed Caption, then
press ENTER. The SETTINGS · CLOSED CAPTION
press ENTER. The SETTINGS · CLOSED CAPTION
menu opens.
menu opens.
4 Press
S
or
T
to highlight Caption Control, then
4 Press
S
or
T
to highlight Analog Caption, then
press ENTER. A menu opens.
press ENTER. A menu opens.
5 Press or
S
T
to select CC Off (turns off closed
5 Press
S
or
T
to select an analog caption setting.
captioning), CC On (turns on closed captioning),
or CC on when mute (turns on closed
captioning when the sound is muted).
You can select:
• CC1 through CC4—Closed captioning
appears in a small banner across the bottom
of the screen. CC1 is usually the “printed”
version of the audio. CC2 through CC4 display
content provided by the broadcaster.
• Text1 through Text4—Closed captioning
covers half or all of the screen. Text1 through
Text4 display content provided by the
broadcaster.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press CCD to turn closed
captioning on or off.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
3 Press
S
or
T
to highlight Closed Caption, then
Select the digital closed captioning mode
press ENTER. The SETTINGS · CLOSED CAPTION
Digital channels usually have one or more closed
captioning modes. The CC1 mode usually displays a
text version of the TV program audio in a small
banner. The other CC modes display information
provided by the broadcaster. CS1 mode displays a
text version of the audio in the same language as
the audio.
menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
4 Press
S
or
T
to highlight Digital Caption, then
press ENTER. A menu opens.
5 Press
S
or
T
to select a digital caption setting.
You can select:
• CS1 through CS6—CS1 is usually the “printed”
version of the audio. CS2 through CS6 display
content provided by the broadcaster. You can
change the way digital closed captioning is
displayed on the screen. For more information,
see “Customize digital closed captioning
settings” on page 67.
• CC1 through CC4—Closed captioning
appears in a small banner across the bottom
of the screen. CC1 is usually the “printed”
version of the audio. CC2 through CC4 display
content provided by the broadcaster.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
4 Press
S
or
T
to highlight Digital CC Settings,
Customize digital closed captioning settings
then press ENTER. The SETTINGS · CLOSED
CAPTION · DIGITAL CC SETTINGS menu opens
with Style highlighted.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
5 Press ENTER, then press
Custom.
S
or
T
to select
3 Press
S
or
T
to highlight Closed Caption, then
press ENTER. The SETTINGS · CLOSED CAPTION
6 Press
S
or
T
to highlight an option, then press
menu opens.
ENTER. You can select:
• Size—Selects the font size.
• Font—Selects the font style.
• Text Color—Selects the color for the words.
• Text Opacity—Selects the opacity level for
the words.
• Background Color—Selects the color for the
background.
• Background Opacity—Selects the opacity
level for the background.
• Edge Effect—Selects the style of the letter
edges.
• Edge Color—Selects the color of the letter
edges.
7 Press MENU to return to the previous menu, or
press EXIT to close the menu.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
4 Press
S
or
T
to highlight Date/Time, then press
Adjust time settings
ENTER. The SETTINGS · TIME · DATE/TIME menu
opens.
When you set up your TV for the first time, the clock
was set up. If you move your TV to a different time
zone, you need to reset the clock to the correct
time.
Set the clock
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
5 Press
S
or
T
to highlight Mode, then press
ENTER. A menu opens.
6 Press or
S
T
to highlight Manual (to set the
options manually) or Auto (the options are
automatically set by the TV signal source), the
press ENTER to close the menu.
7 Press
S
or
T
to highlight Time Zone, then press
ENTER. A menu opens.
8 Press or
S
T
to select your time zone, then press
3 Press
S
or
T
to highlight Time, then press
ENTER. You can select Eastern, Central,
Mountain, Pacific, Alaska, Hawaii, Atlantic, or
Newfoundland.
ENTER. The SETTINGS · TIME menu opens.
9 If your viewing area observes Daylight Saving
Time, press
S
or
T
to highlight Daylight
Saving, then press ENTER.
10 Press
S
or
T
to select On or Off, then press
ENTER to close the menu.
11 If you selected Manual for Mode:
• Press
S
or
T
X
to highlight Year, Month, or Day,
to access the setting. Press or
then press
S
T
to adjust the setting, then press ENTER.
• Press or to highlight Time, then press
access the setting. Press or to highlight
the hour, minute, or AM/PM field, then press
or to adjust the setting. When you are
finished, press ENTER.
S
T
X
to
W
X
S
T
12 Press MENU to return to the previous menu, or
press EXIT to close the menu.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Set the sleep timer
Adjust menu settings
You can specify the amount of time before your TV
automatically turns off.
1 Press MENU. The on-screen menu opens.
Select the menu language
Your TV can display the on-screen menu in English,
French, or Spanish. When you set your TV up for the
first time, the language was selected. You can
change the menu language to a different language.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Time, then press
ENTER. The SETTINGS · TIME menu opens.
3 Press
S
or
T
to highlight Menu Language, then
press ENTER. A menu opens.
4 Press
S
or
T
to highlight a language, then press
ENTER. You can select English, Français, or
Español.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to highlight Sleep Timer, then
press ENTER. A menu opens.
5 Press or
S
T
to select the amount of time before
your TV turns off automatically. You can select
Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240
minutes.
To turn off the sleep timer, select Off.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Note
You can also press SLEEP to set the sleep
timer.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Label an input source
Turn Input Sensor on or off
You can add a label to an input source to make it
easier to identify.
1 Press MENU. The on-screen menu opens.
When the Input Sensor feature is turned on, your TV
automatically detects which video jacks have
devices connected to them and turned on. Your TV
uses this information to determine what options
you can select on the INPUT SOURCE list when you
press INPUT.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight Input Labels, then
press ENTER. The SETTINGS · INPUT LABELS
screen opens with the input source field
highlighted.
3 Press
S
or
T
to highlight Auto Input Sensing,
then press ENTER. A menu opens.
4 Press
S
or
T
to select On (turns on the input
sensor) or Off (turns off the input sensor).
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Maintenance
• Do not use your TV in areas that are too hot or too
cold, because the cabinet may warp or the screen
may malfunction. Your TV works best in
temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F
(5° to 40°C).
4 Press
S
or
T
to select the input source you want
to move to the label field.
to label, then press
X
• Do not place your TV in direct sunlight or near a
heat source.
Clean the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the
cabinet is especially dirty, moisten a soft, lint-free
cloth in a weak detergent solution, squeeze the
excess moisture from the cloth, then wipe the
cabinet with the cloth. Use a clean cloth to dry the
cabinet.
Clean the TV screen
5 Press
S
or
T
to select a character, then press
Clean the screen with a soft, lint-free cloth.
W
or to move to the previous or next character
X
position. Repeat this step to enter additional
characters.
6 When you have completed the label, press
ENTER to save your label and return to the
previous menu. The next time you press INPUT,
your label will appear in the INPUT SOURCE list.
7 Press EXIT to close the menu.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
View system information
Troubleshooting
You may need to view system information during
troubleshooting.
1 Press MENU. The on-screen menu opens.
Warning
Do not try to repair your TV yourself.
Contact authorized service personnel.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
Restore settings to the defaults
When you restore default settings, all the settings
you have customized (including parental controls)
are reset.
1 Press MENU. The on-screen menu opens.
2 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
3 Press
S
or
T
to highlight System Info, then
press ENTER. SETTINGS · UPDATE FIRMWARE
menu opens.
3 Press
S
or
T
to highlight Reset to Default, then
press ENTER. The SETTINGS · RESET TO DEFAULT
menu opens.
4 Press
S
or
T
to highlight System Info, then
version is displayed.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
4 Press
S
or
T
to highlight Reset to Default, then
press ENTER. A message asks if you want to
reset all TV settings to the default settings.
5 Press
S
or
T
to select Yes (to reset) or No (to not
reset), then press ENTER.
If you select Yes, your TV turns off, then turns on
again. The TV SETUP wizard opens.
6 Go through the TV SETUP wizard. For more
information, see “Turn on your TV for the first
time” on page 38.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Update the TV firmware
If you have plugged in a USB flash drive with the
firmware update, the firmware update starts
automatically. Otherwise, a screen opens with
instructions about how to download the
update. Follow the instructions, then press
ENTER.
While your TV installs the firmware update, your
TV displays a status screen. Do not turn off
your TV until the update is complete.
If your TV is behaving oddly and you have tried all
the solutions in the troubleshooting pages, you
may need to update the TV firmware.
Cautions
•
Make sure that you have tried all other
solutions before you upgrade the
firmware.
While the firmware is updating, do not
turn off your TV.
•
9 When the update is complete, unplug the USB
flash drive, then press ENTER. Your TV turns off
then on to complete the update.
Note
10 If the channel list has been deleted and the TV
Setup wizard opens, go through the TV SETUP
wizard. For more information, see “Turn on your
TV for the first time” on page 38.
To update the TV firmware, you need a:
•
•
•
Computer with an available USB port
High-speed Internet connection
USB flash drive
Note
Support & Service. Enter your model number
in the box under Manual, Firmware, Drivers &
•
If you see a message that says the
firmware file is incorrect, make sure
that you have downloaded the correct
file for your model.
Product Information, then click
X.
2 Follow the instructions in the Firmware
Installation Guide on the Insignia website to
download the firmware update and copy it to a
USB flash drive.
•
If you see a message that says the
update failed or the TV screen is blank
and the power LED is blinking red
then blue, turn off your TV, turn it back
on, then run the upgrade again.
3 Plug the USB flash drive into the USB port on
the side of your TV.
4 Press MENU. The on-screen menu opens.
5 Press
W
or
X
to highlight SETTINGS, then press
T
or ENTER. The SETTINGS menu opens.
6 Press
S
or
T
to highlight System Info, then
press ENTER. The SETTINGS · UPDATE FIRMWARE
menu opens.
7 Press
S
or
T
to highlight Update Firmware,
then press ENTER. A message asks if you want
to update the TV firmware.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Video and audio
Problem
Solution
Dark, poor, or no
picture (screen is
good.
Problem
Solution
•
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connect a
cable or satellite box” on
page 15 or “Connect an
Picture does not
fill the screen.
There are black
bars around the
picture.
•
Change the aspect ratio. An
increasing amount of digital TV
and movies are presented in
wide screen (16:9). See the
“Aspect Ratio” option in “Adjust
the TV picture” on page 52.
antenna or cable TV (no box)”
on page 20.
No picture (screen
is not lit) and no
sound.
•
•
Press POWER on the TV or on
the remote control.
•
•
•
Adjust the brightness. See
“Adjust the TV picture” on
page 52.
Change to a different picture
mode. See “Adjust the TV
picture” on page 52.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Check the digital signal
strength” on page 60.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Try another channel. The station
may be experiencing problems.
Make sure that the Audio Only
option is set to Off. See “Play TV
audio only” on page 56.
Make sure that the video cables
are connected securely to your
TV.
•
•
Adjust the contrast and
picture” on page 52.
•
•
Make sure that the power cord
is plugged in.
•
Make sure that the correct
video input source is selected.
source” on page 40.
•
•
•
Try another channel. The station
may be experiencing problems.
Make sure that the incoming
signal is compatible.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connect a
cable or satellite box” on
page 15 or “Connect an
antenna or cable TV (no box)”
on page 20.
Check the closed caption
settings. Some TEXT modes can
block the screen. See “Select
the analog closed captioning
mode” on page 65 or “Select
the digital closed captioning
mode” on page 66.
•
•
No color, dark
picture, or color is
not correct.
•
•
Try another channel. The station
may be experiencing problems.
Adjust the color settings. See
page 52.
Make sure that the video cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connect a
cable or satellite box” on
page 15 or “Connect an
antenna or cable TV (no box)”
on page 20.
•
•
•
•
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Check the digital signal
strength” on page 60.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Problem
Solution
Problem
Solution
Only snow (noise)
appears on the
screen.
Dotted lines or
stripes appear on
the screen.
•
•
Try another channel. The station
•
Make sure that the antenna or
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connect a
cable or satellite box” on
page 15 or “Connect an
cable TV is connected correctly
and securely. See “Connect a
cable or satellite box” on
page 15 or “Connect an
antenna or cable TV (no box)”
on page 20.
antenna or cable TV (no box)”
on page 20.
•
•
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Check the digital signal
strength” on page 60.
•
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Check the digital signal
strength” on page 60.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Picture quality is
good on some
channels and poor
on others. Sound
is good.
•
•
The problem may be caused by
a poor or weak signal from the
broadcaster or cable TV
provider.
If you connect to cable TV
without a set-top box and
experience poor picture quality,
you may need to install a
set-top box to improve signal
reception and picture quality.
Contact your cable TV provider
about upgrading to a set-top
box.
•
•
Double images.
•
•
Use a highly directional outdoor
antenna, cable TV, or satellite
TV.
The picture has a
few bright or dark
spots.
A few bright or dark spots on an
LCD screen is normal. It does
not affect the operation of
your TV.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Problem
Solution
Problem
Solution
Good picture, but
no sound.
No output from
one of the
•
•
Increase the volume.
•
Adjust the audio balance. See
“Adjust sound settings” on
page 55.
Make sure that the sound is not
muted.
speakers.
•
Make sure that you do not have
headphones connected. When
headphones are connected, no
sound comes from the TV
speakers.
Change to a different audio
mode.
If you are using a home theater
system or sound bar, make sure
it is turn on and is not muted.
If you are using a home theater
system or sound bar and have
connected it with a digital
optical cable, set the Digital
Audio/SPDIF option on the
AUDIO menu to PCM. See the
page 55.
Make sure that the audio cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connect a
cable or satellite box” on
page 15 or “Connect an
antenna or cable TV (no box)”
on page 20.
•
Make sure that the audio cables
are connected correctly and
securely to your TV.
After images
appear.
•
Do not display a still image,
such as a logo, game, or
•
•
computer image, for an
extended period of time. This
can cause a permanent
after-image to be burned into
the screen. This type of damage
is not covered by your warranty.
•
Remote control
Remote
control does
not work.
•
Make sure that the power cord is
correctly connected to your TV
and a power outlet.
•
•
•
Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
Point the remote control directly
at the remote control sensor on
your TV. For the location of the
remote control sensor, see “Front”
on page 10.
•
•
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
strength” on page 60.
•
•
•
•
The supplied batteries are
wrapped tightly in clear plastic.
Make sure that you have removed
this plastic from the batteries.
Make sure that the batteries are
installed correctly. See “Install
remote control batteries” on
page 37.
•
•
The audio cables you are using
may be bad. Try a new set.
Poor picture.
Replace dead batteries with new
batteries. See “Install remote
control batteries” on page 37.
Make sure that the room is not
too bright. Light reflecting off
the screen can make the picture
difficult to see.
If an S-VHS camera or a
camcorder is connected while
another connected device is
turned on, the picture may be
poor. Turn off one or more
devices.
Trouble
See instructions and a table of
common codes in “Program
universal remote controls” on
page 81.
•
programming
your existing
universal
remote
•
•
Codes are subject to change. For
up-to-date codes, go to
control.
Replace dead batteries with new
Good sound, but
poor color.
•
•
Adjust the contrast, color, and
brightness settings. See “Adjust
the TV picture” on page 52.
batteries. Refer to the User Guide
that accompanied your universal
remote control.
Audio noise.
•
Refer to the User Guide that
accompanied your universal
remote control and contact the
manufacturer if problems persist.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
General
Problem
Solution
One or more
channels do not
display.
Problem
Solution
•
Make sure that the channels are
not blocked. See “Set parental
control levels” on page 62.
Make sure that the channels are
not hidden. The channel may
have been deleted from the
channel list. You can tune to the
channel by pressing the
number buttons or you can add
the channel back to the channel
list. See “Hide channels” on
page 58.
No power.
•
•
•
Make sure that the power cord
is correctly connected to your
TV and a power outlet.
•
Unplug the power cord, wait 60
seconds, then plug the cord
back in and turn on your TV.
Other devices (for example, a
surround sound receiver,
external speakers, fans, or hair
dryers) may be interfering with
your TV. Try turning off one
device at a time to determine
which device is causing
interference. After you have
determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
•
•
•
If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
If you are using an antenna, the
digital channel signal may be
low. To check the digital
channel signal strength, see
“Check the digital signal
strength” on page 60.
“No signal”
error message is
displayed.
•
•
•
Press INPUT and make sure that
you have selected the correct
input for the device or service
you are trying to use.
If you are using a cable or
satellite box, use the remote
that came with that box to
change channels.
Make sure that you have the
correct input selected to view
channels from the cable or
satellite box.
Password is lost.
•
•
Enter 9999 to access parental
controls, then set a new
password. See “Set or change
the password” on page 60.
Some settings
cannot be
accessed.
If a setting is grayed, the setting
is not available in the current
video input mode (for example
TV mode). Change to a different
mode. See the Picture Mode
option in “Adjust the TV
After Auto
•
Reception can vary by channel
depending on the broadcast
power level of a given station.
Contact your cable or satellite
TV provider.
ChannelSearch,
there are no
channels.
picture” on page 52.
•
•
Make sure that the antenna or
cable/satellite TV is connected
securely to your TV.
TV cabinet
creaks.
•
When the TV is in use, the
temperature rises naturally and
may cause the cabinet to
expand or contract which can
cause a creaking noise. This is
not a malfunction.
Try replacing the cable between
the antenna/cable or
cable/satellite box and your TV.
When I press
INPUT, I cannot
select my
device (it is
grayed out).
•
•
Turn on the device. Your TV
automatically detects and
displays which video jacks have
devices connected to them
when the devices are turned on.
Turn off Auto Input Sensing. See
“Turn Input Sensor on or off” on
page 70.
Control buttons
do not work.
•
•
control buttons” on page 61.
Unplug the power cord, wait a
few seconds, then plug the cord
back in and turn on your TV.
TV keeps
turning off.
•
•
Make sure that the sleep timer
is not turned on. See “Set the
sleep timer” on page 69.
A retail banner
is displayed.
You selected “Retail Mode”
when you ran the TV setup
wizard. Reset your TV to the
factory defaults, then select
Home Use Mode on the What is
your viewing environment
screen. See “Restore settings to
the defaults” on page 71.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Roku Streaming Stick
Problem
Solution
Netflix movies
through my
Roku Streaming
Stick.
Problem
Solution
•
Make sure that you have a
Netflix unlimited streaming
membership. Membership is
required to instantly watch
movies and TV episodes
streaming from Netflix.
I cannot see a
picture on
my TV.
•
•
Make sure that your TV is
turned on.
Make sure that the Roku
Streaming Stick is securely
connected to the purple
HDMI 2/MHL jack. See
“Connect a Roku Streaming
Stick” on page 24.
Make sure that the you have
selected HDMI2 (Roku) as the
video input source. See “Select
the video input source” on
page 40.
Try adjusting the picture
settings on your TV. See “Adjust
the TV picture” on page 52.
I cannot watch
all channels
through my
Roku Streaming
Stick.
•
Not all channels are available in
Canada.
•
MHL-enabled device
•
•
Problem
Solution
The mobile
device does not
charge when
connected to
the
HDMI 2/MHL
jack.
•
•
Make sure that the cables are
securely connected.
I cannot hear
sound.
Make sure that the you have
selected HDMI2 (Roku) as the
video input source. See “Select
the video input source” on
page 40.
If you are using external
speakers, a sound bar, or a
home theater system, make
sure that the audio cables are
connected securely. See
“Connect a basic home theater
system” on page 33.
Make sure that you are using an
MHL cable. An MHL cable may
be difficult to identify. It may
look like a micro USB-to-HDMI
cable because the cable
connectors are the same, but
the cable itself is thinner. The
cable also may not be labeled
MHL.
•
My TV is not
•
Make sure that the cable is
securely connected to the
purple HDMI 2/MHL jack.
Make sure that the cables are
securely connected.
Make sure that you are using an
MHL cable. An MHL cable may
be difficult to identify. It may
look like a micro USB-to-HDMI
cable because the cable
connectors are the same, but
the cable itself is thinner. The
cable also may not be labeled
MHL.
Make sure that the correct
video input source is selected.
See “Select the video input
source” on page 40.
Try adjusting the picture
settings on your TV.
displaying the
video or playing
the audio from
the connected
mobile device.
•
•
If you are using external
speakers, a sound bar, or a
home theater system, make
sure that the volume is turned
up and not muted.
If you are using external
speakers, a sound bar, or a
home theater system, make
sure that you have selected the
correct output mode.
Try adjusting the audio settings
on your TV. See “Adjust sound
settings” on page 55.
•
•
•
•
•
•
•
I cannot
Make sure that there are no
obstructions, like cement walls,
between your Roku Streaming
Stick and your wireless router.
Make sure that you have
selected the correct wireless
router name on the “Wireless”
screen.
If your network requires a
password, make sure that you
have entered the correct
password. Passwords are case
sensitive.
connect to my
wireless
network.
•
•
Some Apps may not work on
your TV, depending on how the
App developer programmed
the App.
•
•
If you have turned off SSID
broadcasting on your wireless
router, select “My network is not
shown” on the “Wireless”
screen.
If you are not getting three or
more signal-strength bars
above your wireless network,
adjust the location of your
wireless router.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
INlink (CEC-compatible) device
Problem
Solution
My TV is playing
the audio from
a connected
device but is
not displaying
the video.
Problem
Solution
•
•
Make sure that the cables are
securely connected.
My TV is not
displaying the
video from the
connected CEC
device.
•
•
•
Make sure that the HDMI cable
Make sure that you are using an
MHL cable. An MHL cable may
be difficult to identify. It may
look like a micro USB-to-HDMI
cable because the cable
connectors are the same, but
the cable itself is thinner. The
cable also may not be labeled
MHL.
Try adjusting the picture
settings on your TV.
Some Apps may not work on
your TV, depending on how the
App developer programmed
the App.
is connected securely to your
TV and the device.
Make sure that the device is
connected to your TV with an
HDMI cable.
Make sure that the device is a
CEC device. See the
documentation that came with
the device for more
•
•
information.
•
Make sure that the correct
video input source is selected.
See “Select the video input
source” on page 40.
•
•
•
Make sure that the INlink
feature is turned on. See “Turn
INlink on or off” on page 45.
Try adjusting the TV picture. See
“Adjust the TV picture” on
page 52.
My TV is
•
•
Make sure that the volume on
your mobile device is turned up
and not muted.
displaying the
video from the
connected
device but is
not playing the
audio.
Make sure that the volume on
your TV is turned up and not
muted.
If the device is not an Insignia
device, it may not be
•
•
Make sure that the cables are
securely connected.
compatible with your TV.
Make sure that you are using an
MHL cable. An MHL cable may
be difficult to identify. It may
look like a micro USB-to-HDMI
cable because the cable
connectors are the same, but
the cable itself is thinner. The
cable also may not be labeled
MHL.
My TV is not
playing the
audio from the
connected CEC
device.
•
•
•
Make sure that the HDMI cable
is connected securely to your
TV and the device.
Make sure that the device is
connected to your TV with an
HDMI cable.
Make sure that the device is a
CEC device. See the
documentation that came with
the device.
Make sure that the TV volume is
turned up and not muted.
Try adjusting the TV sound. See
“Adjust sound settings” on
page 55.
Make sure that the TV speakers
are turned on and not muted.
See “Adjust sound settings” on
page 55.
•
•
Try adjusting the audio settings
on your TV.
Some Apps may not work on
your TV, depending on how the
App developer programmed
the App.
Make sure that you do not have
headphones connected. When
headphones are connected, no
sound comes from the TV
speakers.
If you are using a home theater
system, sound bar, or external
speaker system, make sure it is
turn on and is not muted.
If you are using a home theater
system, sound bar, or external
speaker system and have
connected with a digital optical
cable, set the Digital
•
•
•
•
•
•
Make sure that the INlink
feature is turned on. See “Turn
INlink on or off” on page 45.
If you have connected an HDMI
CEC audio receiver, adjust the
volume on the receiver. When
your TV detects an audio
receiver, the TV speakers turn
off and sound plays through
receiver speakers only.
•
•
Audio/SPDIF option on the
AUDIO menu to PCM. See the
Digital Audio/SPDIF option in
“Adjust sound settings” on
page 55.
•
If the device is not an Insignia
device, it may not be
compatible with your TV.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Problem
Solution
Problem
Solution
My TV’s remote
control does
not control the
device.
My TV does not
turn on when I
turn on my
device.
•
Make sure that there are no
•
Make sure that the INlink
obstructions between the
remote control and the remote
control sensors on your TV and
the device.
feature is turned on. See “Turn
INlink on or off” on page 45.
Make sure that TV Auto Power
On is set to On on the INLINK
On on or off” on page 46.
•
•
•
Depending on the device, all
the buttons may not work.
Make sure that the INlink
•
•
The device may not support this
feature. See the documentation
that came with the device for
more information.
feature is turned on. See “Turn
INlink on or off” on page 45.
If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the TV
Speakers option on the AUDIO
menu is set to On. See “Adjust
sound settings” on page 55.
If you are trying to control the
volume on an HDMI CEC audio
receiver using your TV remote
control, make sure that the
Audio Receiver option on the
INLINK menu is set to On. See
on page 47.
•
The Audio
Receiver
setting on the
INLINK menu
keeps turning
back on after it
is turned off.
When Audio Receiver is set to
Off and INlink Control is set to
On and you make an
adjustment to the audio
receiver (for example, turn the
volume knob or press a button),
Audio Receiver is
automatically set to On. To
prevent this from happening,
turn off the INlink feature. See
“Turn INlink on or off” on
page 45.
•
Two volume
bars appear
when adjusting
the volume.
•
•
When you adjust the volume on
the audio receiver or with the
TV remote control, a double
volume bar appears, one for the
TV volume and one for the
audio receiver volume.
•
The device may not support this
feature. See the documentation
that came with the device for
more information.
The device does
not show up in
the INlink
•
•
Make sure that the device is
turned on.
I cannot select
the Root Menu
option on the
INLINK menu.
The device may not support this
feature. See the documentation
that came with the device for
more information.
Make sure that the HDMI cable
is connected securely to your
TV and the device.
Device list.
•
•
•
Make sure that the device is
connected to your TV with an
HDMI cable.
OR
The device’s
not open when
I select Root
Menu on the
INLINK menu.
Make sure that the INlink
feature is turned on. See “Turn
INlink on or off” on page 45.
Make sure that the device is a
CEC device. See the
documentation that came with
the device.
Note
•
If the device is not an Insignia
device, it may not be
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
compatible with your TV.
My device does
not turn off
when I turn off
my TV.
•
•
Make sure that the INlink
feature is turned on. See “Turn
INlink on or off” on page 45.
Make sure that Device Auto
Power Off is set to On on the
INLINK menu. See “Turn Device
Auto Power Off on or off” on
page 46.
The device may not support this
feature. See the documentation
that came with the device for
more information.
•
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Outputs
Specifications
Video
No
Specifications are subject to change without notice.
Dimensions and weight
Analog audio/Headphone
Digital audio
WiFi
1 (side)
1 (optical) (side)
No
No
49.1 × 28.5 × 3.2 in. (124.7 × 72.5 × 8.1 cm)
Ethernet
Without stand
41.9 lbs.(19 kg)
Audio
49.1 × 31.3 × 13 in. (124.7 × 79.5 × 33 cm)
With stand
50.7 lbs.(23 kg)
DTS Tuning Package
DTS Sound
Screen
Number: 2
Watts per channel: 8W
Speakers
Screen size measured
diagonally
Display type
Screen refresh rate
Display resolution
Panel resolution
Aspect ratio
54.6 in.
Power
LED
120Hz
On: 150W
Standby: <1W
Power consumption
Power input
1080p
AC 120 V, 60Hz
1920 (H) × 1080 (V)
16:9
Miscellaneous
Contrast ratio
OSD languages
INlink
English, French, Spanish
Yes
2,500:1
5,000,000:1
240 nits
(typical)–panel
Dynamic contrast ratio–
list value
TV Brightness (minimum)
cd/m2
Comb filter
Response time
Yes
MHL-enabled and
Roku Ready®
Game Mode
ENERGY STAR qualified
Internet connectable
HDMI2/MHL jack
Yes
No
No
3d y/c digital
8 ms
Horizontal viewing angle
Vertical viewing angle
178°
M5 type (12 mm length) (10 pcs)
ST4 type (14 mm length) (2 pcs)
TV base screws
178°
V-Chip (version 2.0)
Sleep timer
Channel labeling
VESA mount (mm)
(horizontal × vertical)
Yes
Yes
Yes
Display resolutions
HDMI suggested resolutions
Component video suggested
resolutions
1080p, 1080i, 720p, 480p, 480i
1080i, 720p, 480p, 480i
400 × 400
M6 type
VESA mount screws
Tuner
Note
Analog
Digital
NTSC
The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came
with the wall-mount bracket for screw
lengths.
ATSC, 8-VSB, Clear-QAM
Inputs
2 (side)/1 (back)
E-EDID compliant
HDCP compliant
HDMI
MHL-enabled and Roku Ready® (HDMI2/MHL jack)
Component video
Composite video
1 (back)
1 (back)
Shared with component Y
Shared audio (component
and composite)
Yes
PC/VGA
3.5mm DVI audio input
DVI (shared with HDMI)
No
1 (side)
1
1 (back)
USB
Supports JPEG and firmware upgrade
Antenna/Cable
1 (side)
80
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
Common universal remote control codes
Program universal remote
controls
The following is a list of the most common remote
control codes. Codes for other remote controls are
available online at:
You can operate your Insignia TV with a new or
existing universal remote control.
or check with your cable or satellite TV provider for
the remote control code.
1 See the table in “Common universal remote
control codes” on page 81 for common codes. If
you have problems programming your remote
or need a different remote control code:
Insignia TV codes for universal remote controls (for all
Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makes and models
• Contact the universal remote control or
cable/satellite company of the remote control
you are trying to program
for the latest remote control code information.
• Call the Insignia Customer Care Center
1-877-467-4289.
One for All
Phillips
RCA
0054
0198, 0490
135
068, 069, 078, 096, 100, 164, 168, 229,
026
Sony
2 Follow your universal remote control’s
instructions to enter the TV code you found in
Step 1.
Set-top box makes and models
Tips
•
If your universal remote control has a
code search feature, run a code search
to identify a code that matches your
TV. See your universal remote control’s
instructions for details.
If your universal remote control has a
“Learn” feature, you can manually
program it using the Insignia TV
remote to “teach” the commands one
at a time. See your universal remote
control’s instructions for details.
068, 069, 078, 096, 100, 164, 168, 229,
026
Cablevision
Charter
2002, 1204, 1423, 1517, 0171, 1963,
0463, 1463, 0842, 1326, 167, 415, 424,
450, 456, 461, 507, 523, 567, 577, 586
•
10171, 11204, 11326, 11463, 11517,
11641, 11780, 11785, 11892, 11963,
12002
Comcast
Cox
1326, 1463
10171, 11204, 11326, 11517, 11564,
11641, 11963, 12002
DirectTV
Dish Network
Time Warner
TiVo
720
400, 450, 461, 456, 10463, 1463, 0463
0091
Verizon
0198, 0490
Tips
•
The brand name is often visible on the
front of the universal remote control,
and the model number is often visible
on the back.
•
If your universal remote control isn’t
listed on the chart, refer to your
universal remote control’s instructions
and try codes for the brands Orion,
Emerson, Memorex, Sansui, Sylvania,
or Zenith. You may need to try several
codes before finding a match.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Insignia 55" LED TV
Dolby License Notice and Trademark Acknowledgement
Legal notices
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
HDMI
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
HDMI, the HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
DTS Sound™
under license from DTS Licensing Limited. DTS, the Symbol,
& DTS and the Symbol together are registered trademarks
and DTS Sound is a trademark of DTS, Inc. © DTS, Inc. All
Rights Reserved.
MHL™ (Mobile High-Definition Link)
MHL and the MHL logo are trademarks or
registered trademarks of MHL Licensing, LLC
in the United States and other countries.
Roku®
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Roku and the Roku logo are registered trademarks
of Roku, Inc. in the United States and other
countries.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Warning
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RF/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.
Canadian Notice
CAN ICES-3 (B)/NMB-3(B)
Standard Television Receiving Apparatus — Appareil de
réception télévision ordinaire, Canada BETS-7 / NTMR-7
IC Statement
This device complies with Industry Canada licence—exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-55D550NA15 Insignia 55" LED TV
•
•
Outages, static or other problems with over-the-air
reception of television broadcast signals.
Attempted repair by any person not authorized by Insignia
to service the Product
One-year limited warranty -
Insignia Televisions
Definitions:
•
•
Products sold "as is" or "with all faults"
Consumables, including but not limited to batteries (i.e. AA,
AAA, C etc.)
•
Products where the factory applied serial number has been
altered or removed
Loss or Theft of this product or any part of the product
Failures or Damage caused by any contact including but
not limited to liquids, gels or pastes.
Up to three (3) pixel failures (dots that are dark or
incorrectly illuminated) grouped in an area smaller than
one tenth (1/10) of the display size or up to five (5) pixel
failures throughout the display. (Pixel based displays may
contain a limited number of pixels that may not function
normally.)
Insignia Products ("Insignia") warrants to you, the original
purchaser of this new Insignia-branded television ("Product"),
that the Product shall be free of defects in the original
manufacturer of the material or workmanship for a period of one
(1) year from the date of your purchase of the Product ("Warranty
Period"). For this warranty to apply, your Product must be
purchased in the United States or Canada from a Best Buy or
Future Shop authorized dealer of Insignia brand products only
that are packaged with this warranty statement.
•
•
•
•
How long does the coverage last?
Problems with delay in motion or action of video images
while playing first-person style video games.
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. Your purchase date is printed on the
receipt you received with the Product.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT,
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail
store location and your television Product has a screen size of
less than 42 inches, please take your original receipt and the
Product to any Best Buy or Future Shop store. Make sure that you
place the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging. If you purchased the Product from a Best Buy or
Future Shop online web site, mail your original receipt and the
Product to the address listed on the web site. Make sure that you
put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a screen
42 inches or larger, in the United States call 1-888-BESTBUY,
Canada call 1-866-BESTBUY for Future Shop call 1-800-663-2275.
Call agents will diagnose and correct the issue over the phone or
will have an Insignia-approved repair technician dispatched to
your home.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at
Best Buy or Future Shop branded retail stores or websites to the
original purchaser of the product in the county where the
original purchase was made.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
Customer instruction/education
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as power surges
Accident(s)
Misuse, unintentional or intentional
Abuse, unintentional or intentional
Negligence
Commercial purposes/use, including but not limited to use
in a place of business or in communal areas of a multiple
dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.
Modification of any part of the Product, including the
antenna
Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage or power supply
•
•
•
•
83
Download from Www.Somanuals.com. All Manuals Search And Download.
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V1 ENGLISH
14-0103
Download from Www.Somanuals.com. All Manuals Search And Download.
|