FEATURES
INSERTING THE BATTERIES
|
Quick Setup Guide NS-DFLMR1
1
Note: Batteries are not included.
Macro Ring Flash
1 Slide the battery cover
down, then lift up to
open the battery
compartment.
PACKAGE CONTENTS
2
3
4
5
6
• Macro ring flash
• 6 lens adapters (49mm, 52mm,
55mm, 58mm, 62mm, 67mm)
• Quick Setup Guide
7
8
2 Insert 4 AA alkaline or
NiMH Type batteries.
Make sure that the +
and – match what is
indicated in the
9
10
11
FEATURES
• Compatible with all DSLR
cameras with a flash hot-shoe
• Can operate remotely with
PC sync cable (not included)
• 3.75" light ring with guide
number of 10m at ISO 100
• Ideal for close-up photos
• Five illumination power levels
• Xenon flash tube lighting
#
Item
Description
1
Ring Flash and mounting slot Attaches to your camera lens.
compartment.
2
3
Power switch
Charging indicator
Slide to turn on or off.
Brightly lit– The ring flash is ready to use.
Blinking every 1 second– Low battery.
Blinking every 3 seconds – In sleep mode.
Off - When the flash is turned off.
Light to indicate the flash power level
(1/16, 1/8, 1/4, 1/2 , or 1/1).
Insert 4 AA alkaline or Ni MH batteries
(not included)
Press + or – to select the flash power level.
Press to test your flash.
Connect a PC Sync cable (not included) to
trigger the flash from another device or to
locate the flash control unit away from the
camera.
3 Close the battery cover,
then slide it up until it
clicks into place.
4
5
Flash level indicators
Battery compartment
6
7
8
Flash level buttons
Test button
PC sync socket
9
External power pack terminal For use with optional external battery pack
module (not included).
10 Locking ring
11 Lens adapters
Secures the control unit to your camera.
Allows you to mount the ring flash on your
camera lens.
Download from Www.Somanuals.com. All Manuals Search And Download.
|