V2
FINAL
FOR PRINT
NS-CAHBTEB01_15-0448_QSG_V2_EN.ai 1 4/22/2015 11:12:35 AM
Final flat size: 304.8 x 177.8 mm
Final fold size: 76.2 x 177.8 mm
|
Quick Setup Guide NS-CAHBTEB01
Bluetooth Headset
Manually pairing your Bluetooth device
1 Press and hold (call) to enter pairing mode. The
LED blinks red and blue.
PACKAGE CONTENTS
CHARGING YOUR HEADSET
A tone sounds (every 60 seconds) and the LED
flashes red when your headset battery is low.
• Bluetooth Headset
• USB charging cable
• Earbuds (small and large)
• Quick Setup Guide
2 Make sure that your Bluetooth device is within
•
Connect the USB charging cable from your
headset’s charging port to a USB port.
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
FEATURES
•
•
•
•
High-quality stereo sound from Bluetooth 4.0 enabled devices
Battery lasts 12 hours (talk), 10 hours (music)
Inline controls easily adjust audio
Curved design fits comfortably around the neck
Rewind/Skip back
Pairing two devices
1 Pair your headset to your secondary Bluetooth
device first. See "Pairing your first Bluetooth
device" for instructions.
Fast forward/Skip forward
PAIRING YOUR HEADSET
2 Press and hold (call) on your Bluetooth headset
Pairing your first Bluetooth device
to enter pairing mode.
1 Slide the power switch to ON. The LED blinks red
and blue and the headset enters pairing mode.
Play/Pause
3 Connect your primary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
Charging port
4 Re-pair your secondary Bluetooth device to your
Bluetooth headset. See "Manually pairing your
Bluetooth device" for instructions.
Neck strap
Note: When connected to two phones, the
headset calling functions will work with the
primary phone.
Earbud (R)
Power switch
2 Make sure that your Bluetooth device is within
33 ft. (10 m) of your headset.
3 Turn on your Bluetooth device, turn on Bluetooth,
then set your device to pairing mode. For more
information, see the documentation that came
with your Bluetooth device.
Disconnecting and reconnecting your paired
device
Your headset remembers up to six Bluetooth devices
and will turn off after three minutes if it is not paired
to a Bluetooth device.
Microphone
Earbud (L)
Call button/LED indicator
Volume down
Volume up
4 On your Bluetooth device, select
NS-CAHBTEB01. The LED lights blue and a tone
sounds when your headset pairs to your
Bluetooth device.
To reconnect…
To disconnect…
Turn on your headset .Your headset
searches for the last connected
Bluetooth device and reconnects.
Turn off your headset
Before using your new product,
please read these instructions to prevent any damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
|