Insignia Blu ray Player NS BRDVD3 CA User Manual

User Guide  
Blu-Ray Disc Player  
NS-BRDVD3-CA  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Viewing available BD-Live storage space . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Setting the screen saver activation time . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
TV screen and video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
HDMI connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
BD-Live and USB connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Other playback problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
System and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Video file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
MP3/WMA audio file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . 21  
Photo file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If  
the provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lightning flash with arrowhead symbol within an equilateral  
triangle is intended to alert you to the presence of uninsulated  
dangerous voltage within your player’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric shock to  
persons.  
The exclamation point within an equilateral triangle is intended  
to alert you to the presence of important operating and  
maintenance (servicing) instructions in the literature that came  
with your player.  
11 Only use attachments/accessories specified by  
the manufacturer.  
12 Use only with the cart, stand,  
tripod, bracket, or table specified  
by the manufacturer, or sold with  
the apparatus. When a cart is used,  
use caution when moving the  
cart/apparatus combination to  
avoid injury from tip-over.  
This symbol is the symbol for CLASS II (Double Insulation).  
13 Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
Warning  
14 Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as  
Your player employs a laser system.  
Use of controls, adjustments, or the  
performance of procedures other  
than those specified may result in  
hazardous radiation exposure.  
Visible laser radiation is present when open and  
interlocks defeated. Do not stare into the beam.  
power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
Disposal of your old appliance  
15 To reduce the risk of fire or electric shock, do not  
expose this device to rain, moisture, dripping, or  
splashing, and no objects filled with liquids,  
such as vases, shall be placed on it.  
16 An apparatus with a three-prong,  
grounding-type plug is a Class I apparatus,  
which needs to be grounded to prevent  
possible electric shock. Make sure that you  
connect this Class I device to a grounding-type,  
three-prong outlet.  
1. When this crossed-out wheeled bin symbol is attached to a  
product, it means the product is covered by the European  
Directive 2002/96/EC.  
2. All electrical and electronic products should be disposed of  
separately from the municipal waste stream via designated  
collection facilities appointed by the government or the local  
authorities.  
3. The correct disposal of your old appliance will help prevent  
potential negative consequences for the environment and  
human health.  
4. For more detailed information about disposal of your old  
appliance, please contact your city office, waste disposal service  
or the shop where you purchased the product.  
17 The wall plug is the disconnecting device. The  
plug must remain readily operable.  
18 Keep a minimum distance of 4 inches (10cm)  
around the apparatus for sufficient ventilation.  
19 Do not install this equipment in a confined  
space such as book case or similar unit. The  
ventilation should not be impeded by covering  
the ventilation openings with items such as  
newspaper, table-cloths, or curtains.  
Important safety  
instructions  
1 Read these instructions.  
20 Batteries should not be exposed to excessive  
heat such as sunshine, fire, or the like.  
2 Keep these instructions.  
3 Heed all warnings.  
Caution  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type.  
4 Follow all instructions.  
5 Do not use this apparatus near water.  
6 Clean only with a dry cloth.  
7 Do not block any ventilation openings. Install in  
accordance with the manufacturer's  
instructions.  
8 Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-BRDVD3-CA Blu-Ray Disc Player  
Blu-Ray Disc Player  
#
Item  
Description  
Insert a disc with the label side up into this tray. To  
open or close the tray, press (open/close).  
Introduction  
3
Disc tray  
Congratulations on your purchase of a high-quality  
Press to open or close the disc tray.  
Insignia product. Your NS-BRDVD3-CA represents  
the state of the art in Blu-ray Disc player design and  
is designed for reliable and trouble-free  
performance.  
4
5
6
(open/close)  
VFD screen  
Displays status information.  
Press to start or pause playback.  
(play/pause)  
Press to stop playback. The Setup menu is displayed.  
Features  
To resume playback, press  
or to select  
DVD/BD-ROM, then press ENTER. Depending on the  
disc, playback starts where it stopped or at the  
beginning of the disc.  
• Full high-definition video playback at up to 1080p  
resolution for an amazing viewing experience.  
7
(stop)  
• Upconversion of standard definition DVDs for  
enhanced picture quality at up to 1080p over an  
HDMI connection.  
• Deep color  
• Rich multi-channel surround sound.  
• Easy and simple HDTV connection using a single  
HDMI cable (cable not included).  
• Multiple outputs for connecting your home  
theater system or amplifier.  
• PIP functionality that lets you display primary and  
secondary video at the same time (if available on  
the Blu-ray Disc).  
If you press (stop) twice, playback stops  
completely. To start playback again, press  
(play/pause).  
Press to go to the previous title, chapter, or track.  
8
9
(previous)  
Press to go to the next title, chapter, or track.  
Receives signals from the remote control. Do not block.  
Connect a USB flash drive to this port.  
(next)  
10  
11  
Remote control sensor  
USB port  
Back  
• Pop-up menu display without interrupting  
playback (if available on the Blu-ray Disc).  
4
• HDMI 1080p/fps output (Blu-ray Disc only) that  
provides smooth playback of video with a frame  
rate of 60 frames per second (TV must be  
connected with an HDMI cable and be compatible  
with an HDMI cable and be compatible with  
1080p 60 frame).  
VIDEO OUT  
VIDEO  
AUDIO OUT  
L
R
Manufactured:  
C
U
C
C
N
O
L
N
S
F
T
T
S
O
D
R
M
S
0
T
O
U.S Patent Nos. 6,836,549; 6,381,747;  
.
Blu-ray  
DVD-Video  
.
6
0
6
5
C
M
E
S
R
I
F
I
E
D
C
T
O
2
Manufactured under license under  
U.S Patent #'s 5,451,942; 5,956,674;  
5,974,380; 5,978,762; 6,487,535  
other U.S . and worldwide patents  
issued pending. DTS is regist-  
ered trademark the DTS logos  
7,050,698; 6,516,132; and 5,583,936.  
A
6
T
0
D
.
2
.
2
.
:
o
.
0
6
5
C
U
S
This device complies with part 15 of  
the FCC rules. peration is subject  
to the following two conditions:  
(1) This device ay not cause harmful  
interference, and  
(2) This device ust accept any inter-  
ference received, including inter-  
&
BLU-RAY DISC PLAYER  
AC: 110V-120V~ 50/60Hz  
COAXIAL  
This device complies with 21 CFR chapter 1,  
O
3
1
8
1
3
7
2
subchapter  
J
.
Applicable at the date of  
MODEL: NS-BRDVD3  
Manufactured for Insignia Products  
7601 Penn Ave S . Richfield, MN 55423 US A  
m
a nufa c ture.  
&
a
m
Manufactured under license  
fromDolb Laboratories. Do-  
lb and the double-D symbol  
are trademarks of Dolb  
Laboratories.  
&
y
R
I
S
K
O
F
DO  
E
L
N
E
O
C
T
T
O
R
I
P
C
E
S
N
H
L
O
E
C
C
K
m
This Class  
B
digital apparatus complies with  
and Symbol are trademarks of DTS,  
Inc. 1996-2008 DTS , Inc. All Rights  
Reserved.  
y
Canadian ICES-003. Cet appareil num rique  
de la classe est conform la norm  
NMB -003 du Canada.  
POWER: 25W  
MADE IN CHINA  
y
R
I
S
Q
U
E
C
P
H
A
O
C
S
E
O
T
R
R
I
Q
U
E
N
E
CB  
/
PB  
CR  
/
PR  
OPTICAL  
ference that ay cause undesired  
operation.  
m
Y
S/N:  
B
e
e
HDMI  
ETHERNET  
U
V
R
I
COMPONENT VIDEO OUT  
DIGITAL OUT  
5
8
1
2
7
3
6
Package contents  
• Blu-ray Disc player  
• A/V cable  
• Remote control  
• AAA batteries (2)  
• User Guide  
#
Item  
Description  
Plug the power cord into a power outlet.  
1
Power connector  
VIDEO OUT  
Connect a TV to this jack and to the AUDIO OUT L/R  
jacks using a composite video cable (provided).  
2
3
4
Connect a TV to these jacks and to the AUDIO OUT L/R  
jacks using a component video cable and audio cable.  
Front  
COMPONENT VIDEO OUT  
AUDIO OUT L/R  
Connect the audio for a composite TV or component  
video TV to these jacks.  
Connect a TV to this jack using an HDMI cable. An  
HDMI cable carries both video and audio. You do not  
need to make an audio connection.  
5
6
7
8
HDMI  
Connect an ethernet cable to this jack and to a  
broadband Internet jack to download BD-Live  
information.  
2
4
5
1
6
9 10  
11  
3
7
ETHERNET  
8
Connect an optical digital amplifier to this jack to play  
the sound from the TV through the amplifier’s  
speakers.  
OPTICAL DIGITAL OUT  
COAXIAL DIGITAL OUT  
#
Item  
Description  
Connect an coaxial digital amplifier to this jack to play  
the sound from the TV through the amplifier’s  
speakers.  
Press to turn on your player or put your player in  
standby mode. When your player is in standby mode,  
power is still entering your player. To disconnect  
power, unplug the power cord.  
1
2
(standby/on)  
Lights blue when your player is turned off (standby  
mode).  
Turned off when your player is turned on.  
Power indicator  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Blu-Ray Disc Player  
Remote control  
#
Item  
Description  
Press to stop playback. The Setup menu is displayed.  
To resume playback, press  
or to select  
DVD/BD-ROM, then press ENTER. Depending on the  
disc, playback starts where it stopped or at the  
beginning of the disc.  
7
(stop)  
If you press (stop) twice, playback stops  
completely. To start playback again, press  
(play/pause).  
Press to repeat the current title, chapter, track, or  
repeat all. For more information, see “Repeating a  
title, chapter, or CD track” on page 9.  
8
9
REPEAT  
RESOLUTION  
A-B  
Press to select the video resolution. For more  
information, see “Selecting the video output  
resolution” on page 12.  
Press to create a playback loop. For more information,  
see “Creating a playback loop on a DVD or audio CD”  
on page 9.  
10  
During DVD playback, press to open the DVD root  
menu where you can select DVD playback options.  
(This button is valid for DVDs that have a multi-layer  
menu.)  
11  
12  
DISC MENU  
If a disc menu opens when playing a Blu-ray Disc or  
DVD, press to select a menu option, then press ENTER.  
During media file browsing, press to select a file on the  
popup menu, then press ENTER.  
When a menu is open, press to select an option, then  
press ENTER.  
Press to confirm selection in a menu.  
13  
14  
ENTER  
SETUP  
Press to open the setup menu where you can adjust  
options.  
Press to select a subtitle language or to turn subtitles  
off.  
15  
16  
SUBTITLE  
When playing a Blu-ray Disc that has a Java™  
application, press to control playback. For more  
information, see the documentation that came with  
the Blu-ray Disc.  
A (red), B (green),  
C (yellow), D (blue)  
Press to turn PIP (picture-in-picture) mode on or off.  
For more information, see “Using PIP  
17  
#
Item  
Description  
PIP  
(picture-in-picture) mode” on page 10.  
Press to turn on your player or put your player in  
standby mode. When your player is in standby mode,  
power is still entering your player. To disconnect  
power, unplug the power cord.  
Press to open or close the disc tray.  
18  
19  
20  
21  
OPEN/CLOSE  
CLEAR  
1
STANDBY/ON  
Press to clear an input error.  
In playback mode, press SEARCH, then press the  
number buttons to enter a title, chapter, track, or time.  
In menu mode, press to enter the parental code  
password.  
Press to go to the next title, chapter, or track.  
Press to go to the previous title, chapter, or track.  
(next)  
2
3
Number buttons  
SEARCH  
(previous)  
Press to advance one frame at a time. Press  
(play/pause) to resume normal playback.  
Press to search for a title, chapter, or specific time on a  
disc. For more information, see “Searching for a title,  
chapter, or elapsed time” on page 9.  
22  
23  
(step)  
(play/pause)  
ANGLE  
Press to start or pause playback.  
Press to fast reverse. Each time you press this button,  
the fast-reverse speed decreases from Fast x 2,  
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,  
Fast x 128. Press  
playback.  
Press to select a viewing angle if multiple angles are  
available on the disc. For more information, see  
“Selecting a viewing angle” on page 10.  
4
24  
25  
(fast reverse)  
(play/pause) to resume normal  
DISPLAY  
Press to display disc information.  
Press to fast forward. Each time you press this button,  
the fast-forward speed increases from Fast x 2,  
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,  
Fast x 128. Press  
playback.  
During Blu-ray Disc playback, press to open a menu  
that lets you control Blu-ray Disc playback.  
During DVD playback, press to open the DVD menu (if  
available). For more information, see “Using a disc  
popup menu” on page 10.  
5
6
(fast forward)  
ZOOM  
POPUP MENU/  
TITLE MENU  
26  
(play/pause) to resume normal  
Press to zoom in on a video. Each time you press this  
button, the magnification level changes. This button is  
only used for DVD discs.  
27  
28  
RETURN  
AUDIO  
Press to return to the previous menu.  
Press to select the audio mode. For more information,  
see “Selecting the audio mode” on page 10.  
In PIP mode, press to turn the audio for the secondary  
video on or off. For more information, see “Using PIP  
(picture-in-picture) mode” on page 10.  
29  
SECONDARY AUDIO  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-BRDVD3-CA Blu-Ray Disc Player  
Connecting a TV using an HDMI cable (best)  
Setting up your player  
To connect a TV using an HDMI cable:  
• Connect an HDMI cable to the HDMI jack on  
the back of your player and to the HDMI IN  
jack on the TV.  
Installing remote control batteries  
To install remote control batteries:  
1 Remove the battery compartment cover.  
TV  
2 Insert two AAA batteries into the battery  
compartment. Make sure that the + and –  
symbols on the batteries match the + and –  
symbols in the battery compartment.  
Back of player  
Notes  
Only the HDMI is capable of 1080i/1080p video  
output and the highest definition audio codes.  
An HDMI cable carries both video and audio. If  
you want to use TV speakers, you do not need to  
make an audio connection. If you want to use an  
audio receiver, connect an HDMI cable between  
your player and the HDMI input jack on the  
receiver. Then connect a second HDMI cable  
between the HDMI output jack on the receiver  
and the HDMI input jack on the TV.  
3 Replace the battery compartment cover.  
Notes  
Make sure that you insert the batteries correctly.  
Do not heat, open, or short-circuit batteries.  
Do not throw batteries into a fire.  
Do not mix different types of batteries or mix  
old and new batteries.  
Do not try to recharge non-rechargable  
batteries.  
If the remote control does not function correctly  
or if the operating range becomes reduced,  
replace the batteries.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Blu-Ray Disc Player  
Using an analog audio receiver  
Connecting a TV using a component video  
cable (better)  
To connect a component-capable TV to an  
analog audio receiver:  
Notes  
1 Connect a component video cable to the  
COMPONENT VIDEO OUT jacks on the back of  
your player and to the COMPONENT VIDEO IN  
jacks on the TV.  
The following task shows connecting the audio to a  
receiver. If you want to use the TV speakers instead of  
a receiver, connect the audio cable to the TV’s audio  
in jacks on the TV.  
Analog audio receiver  
Using an digital audio receiver  
To connect a component-capable TV to a digital  
audio receiver:  
1 Connect a component video cable to the  
COMPONENT VIDEO OUT jacks on the back of  
your player and to the COMPONENT VIDEO IN  
jacks on the TV.  
Audio cable  
Back of player  
Digital audio receiver  
Connect the OPTICAL DIGITAL OUT jack  
OR  
COAXIAL DIGITAL OUT jack  
Back of player  
Component video cable  
Component video cable  
TV  
2 Connect an audio cable to the AUDIO OUT L/R  
jacks on the back of your player and to the  
AUDIO IN L/R jacks on the receiver.  
3 Connect a second audio cable to the AUDIO  
OUT L/R jacks on the recevier and to the AUDIO  
IN L/R jacks on the TV.  
TV  
2 Connect a digital optical cable to the OPTICAL  
DIGITAL OUT jack on the back of your TV and to  
the OPTICAL DIGITAL IN jack on the receiver.  
Or  
Connect a digital coaxial cable to the COAXIAL  
DIGITAL OUT jack on the back of your TV and to  
the COAXIAL DIGITAL IN jack on the receiver.  
3 Connect a second optical or digital cable to the  
DIGITAL OUT jack on the receiver and to the  
DIGITAL IN jack on the TV.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
NS-BRDVD3-CA Blu-Ray Disc Player  
Connecting a TV using an A/V cable (good)  
Using your player  
To connect a TV using an AV cable:  
• Connect an A/V cable to the VIDEO OUT and  
AUDIO OUT L/R jacks on the back of your  
player and to the VIDEO IN and AUDIO IN L/R  
jack on the TV. Jacks and cable connectors are  
usually color-codes. Make sure that you match  
the colors.  
Note  
Unless otherwise noted, all tasks in this section are  
based on using the remote control.  
Playable discs  
TV  
Disc type  
Logo  
Disc type  
Logo  
Blu-ray Disc  
DVD-R  
DVD-video  
(DVD-ROM)  
Audio CDs (CDDA)  
DTS-CD  
DVD-RAM  
Yellow=Video  
White=Left audio  
Red=Right audio  
DVD-RW  
MP3/WMA/  
JPEG/Data CD  
Notes  
Writeable DVD discs (DVD-RAM, DVD-RW,  
DVD-R) must be finalized, VR-mode only.  
Your player supports discs that are compatible  
with DVD-RAM Standard Version 2.0.  
Playback may not work for some types of discs,  
or when specific operations, such as angle  
change and aspect ratio adjustment, are being  
performed. Information about the discs is  
written in detail on the box.  
Do not allow the disc to become dirty or  
scratched. Fingerprints, dirt, dust, scratches or  
deposits of cigarette smoke on the recording  
surface may make it impossible to use the disc  
for playback.  
Back of player  
Connecting a USB flash drive  
To connect a USB flash drive:  
• Plug the USB flash drive into the USB port on the  
CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF  
or ISO9660 format can be played back.  
Windows Media Audio (WMA) files must be  
written to the disc with a .wma file extension in  
order to be recognized and played back  
correctly.  
High bitrate or variable bitrate .wma files may  
not play back correctly.  
JPEG picture files must be written to the disc  
with a .jpeg or .jpg file extension in order to be  
recognized and played back correctly.  
front of your player.  
Connecting to the Internet  
To connect to the Internet:  
• Connect a network cable into the INTERNET jack  
on the back of your player and into a network  
jack.  
About Blu-ray Discs  
The massive storage capacity of a Blu-ray Disc  
allows a higher standard of picture and audio  
quality and a wealth of special effects and  
enhanced features not available on DVDs.  
Java  
Your player features Java support so you can get the  
most out of the latest Blu-ray Discs. When a Blu-ray  
Disc loads, explore the title menu to enjoy these  
extra features.  
HDMI  
HDMI is the only domestic medium capable of  
transmitting the huge volumes of data required by  
the high picture resolutions and advanced digital  
audio codecs that make Blu-ray such an exciting  
medium.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Blu-Ray Disc Player  
Playing Blu-ray Discs  
• To go to the previous chapter, press  
within  
any  
two seconds after the current chapter starts. To go  
Playing Blu-ray Discs are a lot like playing DVDs,  
to the beginning of the chapter, press  
except Blu-ray Discs have a higher level of  
time after playing the first five seconds of the  
interactivity.  
chapter.  
Most of the standard features of DVD playback work  
the same with Blu-ray Disc playback. The two most  
common exceptions are:  
Resume play—Not available on Blu-ray Java discs  
A-B repeat (playback loop)—Not available on  
some Blu-ray Discs  
• To go to the next chapter, press  
• To play one frame at a time, press  
.
(step). Each  
time you press this button, the video advances  
one frame. Press  
normal playback.  
(play/pause) to resume  
Color buttons  
Playing files on a data disc or USB memory  
stick  
The red, green, yellow and blue buttons on the  
remote control are used with interactive menus  
when operating a Blu-ray Disc that includes Java™  
applications. For more information about using this  
kind of disc, see the instructions that came with the  
disc.  
When you insert a data disc or USB memory stick  
containing picture, music, or video files into your  
player, icons are added to the menu to indicate that  
video, music, or picture files are available for  
playback.  
Playing a Blu-ray Disc or DVD  
To play a Blu-ray Disc or DVD:  
1 Press STANDBY/ON.  
2 Turn on the TV, then select the input setting on  
the TV that matches the connection method  
you used to connect your player.  
Vid eos  
Settings  
3 Press OPEN/CLOSE to open the disc tray.  
4 Place a disc on the disc tray with the label facing  
up, then press OPEN/CLOSE to close the disc  
tray. It may take a few seconds for the disc to  
load.  
Music  
Pictures  
5 If a Blu-ray Disc or DVD menu opens, press  
or to select PLAY, then press ENTER.  
6 To eject the disc, press OPEN/CLOSE.  
Controlling Blu-ray Disc or DVD playback  
Note  
To play audio or video files:  
1 Press or to select Music or Videos, then  
If  
appears on the screen, the current action is not  
press ENTER. A menu opens.  
permitted by the disc or your player. For example,  
many discs do not let you fast-forward through the  
warning information at the beginning of the disc.  
2 Press or to select Play Files, then press  
ENTER. The Please select Play mode box opens.  
To control Blu-ray Disc or DVD playback:  
• To start or pause playback, press  
(play/pause).  
The sound is muted when your player is in pause  
mode. To resume normal playback, press  
(play/pause).  
• To stop playback, press (stop). The Setup menu  
is displayed. To resume playback, press  
or to select DVD/BD-ROM, then press ENTER.  
Depending on the disc, playback starts where it  
stopped or at the beginning of the disc. If you  
press (stop) twice, playback stops completely.  
To start playback again, press  
(play/pause).  
Playback starts at the beginning of the disc.  
• To fast-forward, press . Each time you press this  
button, the fast-forward speed changes in the  
following sequence: Fast x 2, Fast x 4, Fast x 8,  
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press  
(play/pause) to resume normal playback.  
• To fast-reverse, press . Each time you press this  
button, the fast-reverse speed changes in the  
following sequence: Fast x 2, Fast x 4, Fast x 8,  
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press  
(play/pause) to resume normal playback.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-BRDVD3-CA Blu-Ray Disc Player  
3 Press or to select Play All (plays all files) or  
Play Selection (plays files added to the playlist),  
then press ENTER. The file(s) play and the  
following menu opens.  
4 Press or to select Add to playlist, then  
press ENTER. The file is added to the playlist.  
Note  
If the file you selected is already in the playlist,  
Remove from playlist appears.  
When you add a file to the playlist, Remove all  
from playlist appears on the screen  
automatically. You can use Remove all from  
playlist, Previous Folder, Play Files, Browse  
Pictures, and Now Playing to control playback.  
• If you are playing music files and want to view  
JPG picture files at the same time, press  
RETURN, then press or to select Browse  
Pictures, then press ENTER. Select the JPG  
files you want to view.  
• If you want to to see information about the file  
that is playing, press or to select Now  
Playing, then press ENTER. The following  
display appears  
Playing an audio CD  
File 1/5 song1.mp3  
Title: Cool Track  
Artist: Ricardo Funiccio  
Album: Dead Dux  
To play an audio CD:  
1 Press STANDBY/ON.  
Play  
0:02:00  
0:30:00  
Off  
Off  
2 Press OPEN/CLOSE to open the disc tray.  
3 Place a CD on the disc tray with the label facing  
up, then press OPEN/CLOSE to close the disc  
tray. It may take a few seconds for the CD to  
load.  
4 Press ENTER to start playback.  
5 To eject the CD, press OPEN/CLOSE .  
Random play indicator  
Repeat indicator  
Play indicator  
Controlling audio CD playback  
To create a playlist:  
1 Insert a disc or plug in a USB flash drive, select  
Music, Videos, or Pictures, then press  
2 Press or to select Optical Disc or USB, then  
press ENTER. A file browser window opens with  
a list of files and folders.  
To control audio CD playback:  
• To start or pause playback, press  
The sound is muted when your player is in pause  
mode. To resume normal playback, press  
(play/pause).  
(play/pause).  
.
• To stop playback completely, press (stop) To  
start playback again, press  
(play/pause).  
3 Press or to select a file or folder, then press  
ENTER. If you selected a folder, the files in the  
folder are displayed. Press or to select a file,  
then press ENTER. The following menu opens:  
Playback starts at the beginning of the CD.  
• To fast-forward, press . To resume normal  
playback, press  
• To fast reverse, press . To resume normal  
playback, press (play/pause).  
• To go to the previous track, press  
next track, press  
(play/pause).  
. To go to the  
.
• To select a track, press SEARCH, enter the track  
number with the number buttons, then press  
ENTER.  
Or,  
Enter the track number by pressing the  
appropriate number buttons.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Blu-Ray Disc Player  
Displaying Blu-ray Disc information  
Viewing photographs  
Your player can display digital photograph files that  
have been burned onto a data disc, DVD+/-R,  
DVD+/-R/(W), or Blu-ray Disc.  
Note  
The information displayed for discs other than  
Blu-ray Discs will be different.  
To view photographs:  
To display Blu-ray Disc information:  
1 Insert the disc with photographs into your  
• Press DISPLAY. Your player displays information  
about the Disc, such as type of disc, current  
elapsed time in title, total amount of time in title,  
current chapter, and total number of chapters.  
Blu-ray player. The following menu opens:  
• Press DISPLAY again to close the display.  
Searching for a title, chapter, or elapsed time  
To search for a title, chapter, or elapsed time:  
Vid eos  
1 During playback, press SEARCH one or more  
Settings  
times to select a search mode.  
• One press selects Goto Title - - - mode.  
• Two presses selects Goto Chapter - - - mode.  
Music  
• Three presses selects Goto Time --: -- : --  
mode.  
Pictures  
2 Press the number buttons to enter the title  
number, chapter number, or time, then press  
ENTER. Your player goes to the title, chapter, or  
time you entered.  
Repeating a title, chapter, or CD track  
2 Press or to select Pictures, then press  
ENTER. A menu opens.  
To repeat a title, chapter, or CD track:  
Main Menu—Returns to the main menu.  
• To repeat a title or chapter, press REPEAT one or  
more times to select a repeat mode. You can  
select Off, Repeat Title, Repeat Chapter, Repeat  
track, Repeat all, or Random.  
Play Files—Open the Please Select Play Mode  
box. Press or to select an option, then  
press ENTER.  
Play All—Plays all files.  
Play Current Folder—Plays the current  
JPG files.  
Creating a playback loop on a DVD or  
audio CD  
Browse Music—Opens the music playing  
menu where you can select music files to  
play while you view photographs.  
Note  
Blu-ray Discs do not normally support playback  
loops.  
Now Playing—Opens a progress bar.  
To create a playback loop:  
To create a playlist:  
1 Play the disc until you reach the point where  
1 Insert a disc or plug in a USB flash drive, then  
you want the loop to start, then press A-B.  
press  
.
2 Play the disc until you reach the point where  
you want the loop to stop, then press A-B. Your  
player plays the loop you created repeatedly.  
2 Press or to select Optical Disc or USB, then  
press ENTER. A file browser window opens with  
a list of files and folders.  
3 Press or to select a file or folder, then press  
ENTER. If you selected a folder, the files in the  
folder are displayed. Press or to select a file,  
then press ENTER.  
3 Press A-B to cancel the loop and return to  
normal playback.  
4 Press . A menu appears.  
5 Press or to select an option, then press  
ENTER. You can select:  
Remove all from playlist—Deletes all files in  
playlist.  
Previous folder—Returns the previous menu.  
Play files—Play all files or play files in the  
playlist.  
Browse Music—Opens the music playing  
menu where you can select music files to play  
while you view photographs.  
Now playing—Opens a progress bar.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
NS-BRDVD3-CA Blu-Ray Disc Player  
To add a JPG file to the playlist:  
Selecting the audio mode  
1 Insert a disc or plug in a USB flash drive, then  
To select the audio mode:  
press  
.
1 Press AUDIO. Your player displays audio channel  
information, such as “01/03 Eng Dolby Digital.”  
“01” indicates the currently selected audio  
channel. “03” indicates the total number of  
audio channels. “Eng” (English) indicates the  
audio language. “Dolby Digital” describes the  
currently selected audio format.  
2 Press or to select Optical Disc or USB, then  
press ENTER.  
3 Press or to select a file or folder, then press  
ENTER. If you selected a folder, the files in the  
folder are displayed. Press or to select a file,  
then press ENTER. The following menu opens:  
2 Press to select an audio mode.  
Selecting a viewing angle  
Note  
Add to playlist  
Not all discs are recorded with multiple viewing  
angles and not all scenes on a disc have multiple  
viewing angles.  
4 Press ENTER.  
To select the viewing angle:  
5 Press or to select Play File, then press  
ENTER. The file starts playing.  
6 During playback, press DISC MENU to open the  
SLIDE SHOW menu where you can select the  
slide show mode and picture switching time.  
• During playback, press ANGLE. Your player  
displays “Angle X of X.The first “X” indicates the  
current viewing angle, and the second “X”  
indicates the total number of viewing angles.  
Selecting the on-screen menu language  
Using PIP (picture-in-picture) mode  
To select the on-screen menu language:  
1 Press ENTER. The Settings menu opens.  
Some Blu-ray Discs and DVDs are compatible with  
picture-in-picture (PIP) mode. In PIP mode, the  
primary video is displayed on the full screen, and  
the secondary video is displayed in a small window.  
Network  
Language  
Primary video  
Display  
OSD  
English  
Auto  
Menu  
Audio  
Subtitle  
Audio  
Auto  
Settings  
None  
Language  
Parental  
System  
Secondary video  
See the documentation that came with the disc for  
playback instructions.  
2 Press or to select Language. The Language  
menu opens.  
To use PIP mode:  
1 Press PIP to turn PIP mode on or off.  
2 If PIP mode is on, press SECONDARY AUDIO to  
turn the audio for the video in the PIP window  
on or off.  
3 Press to select OSD, then press ENTER.  
4 Press or to select the language you want,  
then press ENTER. You can select English,  
French, or Spanish.  
5
Press to go to the previous menu.  
Using a disc popup menu  
Selecting the disc menu language  
To use a disc popup menu:  
To select the disc menu language:  
1 Press ENTER. The Settings menu opens.  
1 During Blu-ray or DVD playback, press  
POPUP MENU/TITLE MENU. The Blu-ray popup  
menu or DVD disc menu opens.  
Network  
Language  
2 Press  
ENTER.  
or to select an option, then press  
Display  
OSD  
English  
Menu  
Audio  
Subtitle  
Auto  
Auto  
None  
Audio  
Settings  
Language  
Parental  
System  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Blu-Ray Disc Player  
2 Press or to select Language. The Language  
4 Press or to select the language you want,  
then press ENTER.  
menu opens.  
3 Press , press or to select Menu, then press  
ENTER.  
4 Press or to select the language you want,  
then press ENTER.  
Notes  
Not all languages are available on all discs.  
Some discs do not let you select the subtitle  
language from your player. Instead, you have to  
select the subtitle language from the disc setup  
menu (the menu that appears after you insert  
the disc).  
Notes  
Not all languages are available on all discs.  
Most discs only have one menu language.  
You can also select the subtitle language from the  
Subtitle menu in the on-screen menu.  
5 Press to go to the previous menu.  
Determining whether an HDMI TV is  
connected  
Selecting the audio language  
To determine whether an HDMI TV is connected:  
1 Press ENTER. The Settings menu opens.  
To select the on-screen menu language:  
1 Press ENTER. The Settings menu opens.  
Parental  
Network  
Display  
Language  
Display  
System  
HDMI Status  
C onnected  
1080p (HDMI)  
HDMI Auto  
16:9 W ide  
OSD  
English  
HDMI preferred Format  
R es olution  
Menu  
Audio  
Subtitle  
Auto  
Auto  
None  
Audio  
Network  
Display  
Audio  
Set ting s  
Settings  
TV Aspect  
Language  
Film Mode(1080p24)  
Off  
Parental  
Language  
System  
2 Press or to select Display. The Display menu  
2 Press or to select Language. The Language  
opens.  
menu opens.  
If an HDMI TV is connected, Connected appears.  
If an HDMI TV is not connected Disconnected  
appears  
3 Press , press or to select Audio, then press  
ENTER.  
4 Press or to select the language you want,  
then press ENTER.  
3 Press to go to the previous menu.  
Notes  
Automatically determining the best HDMI  
resolution  
Not all languages are available on all discs.  
Some discs do not let you select the audio  
language using your player’s menu. Instead, you  
have to select the audio language from the disc  
setup menu (the menu that appears after you  
insert the disc).  
To automatically determine the best HDMI  
resolution:  
1 Press ENTER. The Settings menu opens.  
5 Press to go to the previous menu.  
Parental  
Display  
Selecting the subtitle language  
System  
HDMI Status  
C onnected  
1080p (HDMI)  
HDMI Auto  
16:9 W ide  
HDMI preferred Format  
R es olution  
To select the subtitle language:  
1 Press ENTER. The Settings menu opens.  
Network  
Display  
Audio  
Set ting s  
TV Aspect  
Film Mode(1080p24)  
Off  
Network  
Language  
Language  
Display  
OSD  
English  
Menu  
Audio  
Subtitle  
Auto  
Auto  
None  
Audio  
Settings  
Language  
2 Press or to select Display. The Display menu  
opens. Your player displays the best HDMI  
format for the connected TV.  
Parental  
System  
3 Press to go to the previous menu.  
2 Press or to select Language. The Language  
menu opens.  
3 Press , press or to select Subtitle, then  
press ENTER.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NS-BRDVD3-CA Blu-Ray Disc Player  
Selecting the video output resolution  
Selecting the TV aspect ratio  
1 Press ENTER. The Settings menu opens.  
To select the video output resolution:  
1 Press ENTER. The Settings menu opens.  
Parental  
Display  
Parental  
System  
HDMI Status  
C onnected  
1080p (HDMI)  
HDMI Auto  
16:9 W ide  
Display  
HDMI preferred Format  
R es olution  
System  
HDMI Status  
C onnected  
Network  
Display  
Audio  
Set ting s  
TV Aspect  
HDMI preferred Format  
R es olution  
1080p (HDMI)  
HDMI Auto  
16:9 W ide  
Network  
Display  
Audio  
Film Mode(1080p24)  
Off  
Set ting s  
TV Aspect  
Film Mode(1080p24)  
Off  
Language  
Language  
2 Press or to select Display. The Display menu  
opens.  
2 Press or to select Display. The Display menu  
3 Press , press or to select TV Aspect, then  
press ENTER.  
4 Press or to select the aspect ratio you want,  
then press ENTER. You can select 16:9  
Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, or  
16:9 wide.  
opens.  
3 Press , to select Resolution, then press ENTER.  
4 Press or to select the resolution you want,  
then press ENTER.  
TV type  
Resolution  
Notes  
If your TV is a standard-definition  
NTSC TV (American or Asian SD TV)  
480i  
If your TV has a rectangular (16:9) aspect ratio,  
choose one of the 16:9 aspect ratios. If your TV  
has a square (4:3) aspect ratio, choose one of the  
4:3 aspect ratios.  
Setting your player for one of the 16:9 settings  
when connected to a 4:3 TV or setting your  
player for one of the 4:3 settings when  
connected to a 16:9 TV will produce  
unpredictable results.  
In the standard-definition (480p) mode, your  
player has 16:9 and 4:3 aspect ratios. In the  
high-definition (720p/1080i/1080p) mode, your  
player has only 16:9 aspect ratio.  
If your TV is an enhanced-definition 480p  
TV (EDTV)  
If your TV is a high-definition TV  
(HDTV) capable of 720p only  
720p  
If your TV is a high-definition TV  
(HDTV) capable of 1080i only  
1080i  
If the TV is a high-definition TV  
(HDTV) capable of 1080p (any frame  
rate) connected to the HDMI jack on  
your player  
1080p (HDMI)  
If your TV is a high-definition TV  
(HDTV) connected to the HDMI jack on  
your player and you want your player  
to set the output resolution based on  
information exchanged between the  
TV and your player over the HDMI  
cable  
HDMI Auto  
5 Press to go to the previous menu.  
Turning film mode on or off  
Movies are recorded on film at a rate of 24 pictures  
(frames) per second. Many of the movies on Blu-ray  
Discs are recorded on the discs at this frame rate.  
However, not all TVs can display 24 progressive  
frames/second of video. If the TV cannot display  
this frame rate, you need to turn off Film Mode  
(1080p24).  
Notes  
Selecting a resolution the TV does not support  
could result in an unstable picture or loss of the  
picture. See the documentation that came with  
the TV to find the resolutions the TV supports.  
Only the HDMI output on your player supports  
1080p video output at any frame rate. If the TV  
is connected to the component output, the  
video output is limited to 1080i.  
To turn film mode on or off:  
1 Press ENTER. The Settings menu opens.  
Parental  
Display  
System  
HDMI Status  
C onnected  
1080p (HDMI)  
HDMI Auto  
16:9 W ide  
5 Press to go to the previous menu.  
HDMI preferred Format  
R es olution  
Network  
Display  
Audio  
Set ting s  
TV Aspect  
Film Mode(1080p24)  
Off  
Language  
2 Press or to select Display. The Display menu  
opens.  
3 Press , press or to select Film Mode  
(1080p24), then press ENTER.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Blu-Ray Disc Player  
4 Press or to select On or Off. Off selects a 60  
3 Press , press or to select Digital Output,  
then press ENTER.  
frames/second output format.  
5 Press to go to the previous menu.  
4 Press or to select the digital output mode  
you want, then press ENTER. You can select:  
Selecting the PCM downsampling rate  
PCM—Sends mixed digital audio over the  
HDMI connection in 7.1CH PCM (if supported  
by HDMI device) and the SPDIF connection in  
two-channel PCM format.  
To select the PCM downsampling rate:  
1 Press ENTER. The Settings menu opens.  
Bitstream HD—Sends the original bitstream  
from the disc over the HDMI and SPDIF  
connections using highest quality possible.  
HDMI has the higher quality capabilities with  
advanced audio codecs like TrueHD and  
DTS-HD. Blu-ray audio is limited to the  
soundtrack for the main movie (no PIP audio  
and no effects audio).  
System  
Au dio  
Network  
Display  
PCM Downsampling  
Digital Output  
48 K hz  
PCM  
Off  
Dynamic Range Control  
Settings  
Audio  
Language  
Bitstream Legacy—Sends the original  
bitstream from the disc over the HDMI and  
SPDIF connections using legacy audio  
formats. Blu-ray audio is limited to the  
soundtrack for the main movie (no PIP audio  
and no effects audio).  
Bitstream mixed—Sends mixed and encoded  
Blu-ray audio streams in a single bitstream.  
This mode is primarily intended for use with  
SPDIF 5.1CH receivers to produce mixed  
Blu-ray audio in surround sound.  
Parental  
2 Press , press or to select Audio. The Audio  
menu opens.  
3 Press to select PCM Downsampling, then  
press ENTER.  
4 Press one or more times to select the PCM  
downsampling rate you want. You can select  
48KHz, 96KHz, or Off.  
5 Press to go to the previous menu.  
• If you have a surround sound amplifier  
connected to your player through the SPDIF  
jack, select the highest sampling rate the  
receiver supports. See the documentation that  
came with the receiver.  
• If you do not have a surround sound amplifier  
connected to your player, select 48KHz.  
• If you have a surround sound amplifier  
connected to your player through the analog  
audio L and R jacks, select 48KHz.  
• If you have a surround sound amplifier  
connected to your player through the HDMI  
output, select 48KHz.  
Turning dynamic range control on or off  
Dynamic range control is only active when a Dolby  
Digital signal is detected.  
When Dynamic Range Control is set to Off, movie  
soundtracks are played with the standard dynamic  
range.  
When movie soundtracks are played at low volume  
or from smaller speakers, you can set Dynamic  
Range Control to On. Your player applies  
appropriate compression to make low-level content  
more intelligible and prevent dramatic passages  
from getting too loud.  
To turn dynamic range control on or off:  
1 Press ENTER. The Settings menu opens.  
Note  
Incorrectly setting the digital audio output’s PCM  
sampling rate may result in unpredictable audio  
playback.  
System  
Au dio  
5 Press to go to the previous menu.  
Network  
Display  
PCM Downsampling  
Digital Output  
48 K hz  
PCM  
Off  
Selecting the digital audio output mode  
Dynamic Range Control  
Settings  
Audio  
To select the digital audio output mode:  
1 Press ENTER. The Settings menu opens.  
Language  
Parental  
System  
Au dio  
Network  
Display  
PCM Downsampling  
Digital Output  
48 K hz  
PCM  
Off  
2 Press or to select Audio. The Audio menu  
Dynamic Range Control  
Settings  
opens.  
Audio  
3 Press , press or to select Dynamic Range  
Control, then press ENTER.  
Language  
4 Press or to select On or Off.  
Parental  
5 Press to go to the previous menu.  
2 Press or to select Audio. The Audio menu  
opens.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
NS-BRDVD3-CA Blu-Ray Disc Player  
Setting the parental control password  
Selecting the parental control country  
If a Blu-ray Disc has parental rating systems for  
more than one country, you can select the country  
you want to use.  
To set the parental control password:  
1 Press ENTER. The Settings menu opens.  
To set the parental control country:  
1 Press ENTER. The Settings menu opens.  
Display  
Parental  
Audio  
Parental Country  
Parental Level  
USA  
Language  
Parental  
System  
8[Adult ]  
Settings  
Parental Password  
Network  
2 Press or to select Parental. The Parental  
menu opens.  
3 Press . The password screen opens.  
2 If the Parental Control option is set to On, set  
the option to Off. See “Turning parental controls  
on or off” on page 14.  
4 Enter the default password (0000). If you forget  
your password, reset your player to the factory  
defaults. The password will be reset to 0000. For  
more information, see “Resetting settings to the  
factory defaults” on page 16  
3 Press or to select Parental. The Parental  
menu opens.  
5 Press to go to the previous menu.  
4 Press to select Parental County, then press  
ENTER.  
Turning parental controls on or off  
Note  
To turn parental controls on or off:  
1 Press ENTER. The Settings menu opens.  
Some Blu-ray Discs do not have multiple countries  
encoded for parental controls.  
5 Press one or more times to select the country  
Display  
you want.  
Parental  
Audio  
6 Press to go to the previous menu.  
Parental Country  
Parental Level  
USA  
Language  
Parental  
System  
Setting the parental control level  
8[Adult ]  
Settings  
Parental Password  
To set the parental control level:  
1 Press ENTER. The Settings menu opens.  
Network  
2 Press or to select Parental. The Parental  
menu opens.  
3 Press . The password screen opens.  
4 Enter the password. If you forget your password,  
reset your player to the factory defaults. The  
password will be reset to 0000. For more  
information, see “Resetting settings to the  
factory defaults” on page 16  
5 Press or to select Parental Control, then  
press ENTER.  
2 Press or to select Parental. The Parental  
menu opens.  
6 Press or to select On or Off, then press  
ENTER. If you select On, you can change the  
other parental control options. If you select Off,  
you cannot change the other parental control  
options.  
3 If the Parental Control option is set to On, set  
the option to Off. See “Turning parental controls  
on or off” on page 14.  
4 Press or to select Parental Level, then press  
ENTER.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Blu-Ray Disc Player  
5 Press or to select the rating level you want  
2 Press or to select System. The System menu  
to block, then press ENTER. That rating and all  
opens.  
higher ratings will be blocked. You can select:  
1[Kid Safe]—Suitable for all children.  
2[G]—General audiences.  
3[PG]—Parental guidance suggested.  
4[PG-13]—Not suitable for anyone under 13.  
5[PGR]—Parental guidance recommended.  
3 Press , press or to select BD-Live Internet  
Access, then press ENTER.  
4 Press one or more times to select the access  
level you want. You can select:  
Limit Access—Allows Internet access with  
valid “BD-Live” network access approval.  
6[R]—Not suitable for anyone under 17 unless  
supervised by a parent or adult guardian.  
Always Allow Access—Always allows BD-Live  
Internet access.  
7[NC-17]—Not suitable for anyone under 17.  
8[Adult]—All DVDs can be played.  
Prohibit Access—Never allows BD-Live  
Internet access.  
5 Press to go to the previous menu.  
Note  
These ratings are for DVDs only.  
Viewing available BD-Live storage space  
6 Press or to select Parental Control, then  
press ENTER. Press or to select On.  
To view available BD-Live storage space:  
1 Press ENTER. The Settings menu opens.  
7 Press to go to the previous menu.  
Audio  
System  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
Setting automatic disc playback mode  
On  
Language  
Always Allow  
USB (1.9GB Free)  
To set automatic disc playback mode:  
1 Press ENTER. The Settings menu opens.  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
Update Via Network  
Required Storage:84 MB  
Audio  
Network  
Displa y  
System  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
On  
Language  
Always Allow  
USB (1.9GB Free)  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
2 Press or to select System. The System menu  
opens. The available storage space is displayed  
next to BD-Live Storage.  
Update Via Network  
Required Storage:84 MB  
Network  
Displa y  
3 Press to go to the previous menu.  
Erasing BD-Live storage  
2 Press or to select System. The System menu  
opens.  
To erase BD-Live storage:  
1 Press ENTER. The Settings menu opens.  
3 Press to select Optical Disc Autoplay, then  
press ENTER.  
4 Press or to On or Off. When On is selected  
and you insert a Blu-ray Disc, files play back  
automatically. When Off is selected and you  
insert a Blu-ray Disc, the disc you can select are  
displayed on the Settings menu.  
Audio  
System  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
On  
Language  
Always Allow  
USB (1.9GB Free)  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
5 Press to go to the previous menu.  
Update Via Network  
Required Storage:84 MB  
Network  
Displa y  
Setting the BD-Live Internet access level  
You can set the BD-Live Internet access level to  
control access to BD-Live.  
To set the BD-Live Internet access level:  
1 Press ENTER. The Settings menu opens.  
2 Press or to select System. The System menu  
opens.  
3 Press , press or to select Erase BD-Live  
Storage, then press ENTER.  
4 Press or to select OK, then press ENTER. All  
bookmarks and BD-live content saved in  
memory are deleted.  
Audio  
System  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
On  
Language  
Always Allow  
USB (1.9GB Free)  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
5 Press to go to the previous menu.  
Update Via Network  
Required Storage:84 MB  
Network  
Displa y  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
NS-BRDVD3-CA Blu-Ray Disc Player  
Setting the screen saver activation time  
Downloading player update software  
Your player has a screen saver feature that turns the  
screen black when your player is inactive. You can  
set the amount of time you want your player to wait  
before activating the screen saver.  
To download player update software:  
1 Press ENTER. The Settings menu opens.  
Audio  
System  
To set the screen saver activation time:  
1 Press ENTER. The Settings menu opens.  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
On  
Language  
Always Allow  
USB (1.9GB Free)  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Audio  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
System  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
On  
Language  
Update Via Network  
Required Storage:84 MB  
Network  
Displa y  
Always Allow  
USB (1.9GB Free)  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
Update Via Network  
Required Storage:84 MB  
Network  
Displa y  
2 Press or to select System. The System menu  
opens.  
3 Press , press or to select Update Via  
Network, then press ENTER.  
2 Press or to select System. The System menu  
4 Follow the on-screen instructions for updating  
opens.  
the software.  
3 Press , press or to select Screen Saver  
Duration, then press ENTER.  
5 Press to go to the previous menu.  
Determining if the network connection is  
active  
4 Press one or more times to select the amount  
of time you want the player to wait before  
activating the screen saver feature.  
To determine if the network connection is active:  
1 Press ENTER. The Settings menu opens.  
5 Press to go to the previous menu.  
Resetting settings to the factory defaults  
To reset settings to the factory defaults:  
1 Press ENTER. The Settings menu opens.  
Audio  
System  
Opt ical Disc Auto Play  
BD- Live Internet Access  
BD- Live Storage  
On  
Language  
Always Allow  
USB (1.9GB Free)  
Parental  
System  
Erase Blu-ray Storage  
Settings  
Scr een Saver Duration  
Reset Settings  
5 M inutes  
Update Via Network  
Required Storage:84 MB  
Network  
Displa y  
2 Press or to select Network.  
3 Press , press or to select Wired, then press  
ENTER. The IP Settings screen opens. If the  
network connection is active, Link Up appears  
next to Link Status. If the network connection is  
not active, Link Down appears next to Link  
Status.  
2 Press or to select System. The System menu  
opens.  
3 Press , press or to select Reset Settings,  
then press ENTER. A message appears asking  
you to confirm your selection.  
4 Select OK, then press ENTER to close the  
message box.  
5 Press to go to the previous menu.  
4 Press to go to the previous menu.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Blu-Ray Disc Player  
Configuring the Internet connection  
Maintaining  
To configure the Internet connection:  
1 Press ENTER. The Settings menu opens.  
General guidelines  
• The top and back panels of your player may  
become hot after a long period of use. This is not a  
malfunction.  
• When your are not using your player, make sure  
that you remove the disc and put your player into  
standby mode.  
• If you do not use your player for a long period of  
time, it may not function correctly. Turn on and  
use your player occasionally.  
• Do not place objects on the disc tray.  
• Do not locate your player:  
• Near heating devices or in an enclosed vehicle  
• In an area with a temperature over 104°F  
(40°C) or humidity over 90%  
2 Press or to select Network, then press  
ENTER.  
3 Press , press or to select Wired, then press  
ENTER. The IP Settings screen opens. The IP  
Settings screen opens.  
• Dirty places  
• In an area with direct exposure to sunlight  
• Do not install this equipment in a confined  
space such as a book case or similar unit. The  
ventilation should not be impeded by  
covering the ventilation openings with items  
such as newspapers, table-cloths, or curtains.  
• Make sure that you leave a minimum of 4 inches  
(10 cm) around your player for sufficient  
ventilation.  
Electrical disturbance  
If you place your player next to a radio, TV, or VCR,  
the image may be poor and the sound may be  
distorted. In this case, move your player away from  
the radio, TV, or VCR.  
Condensation  
Condensation may form inside your player when:  
• You move your player from a cold area to a warm  
4 Press or to select IP Mode, then press  
ENTER.  
5 Press to select an IP mode. You can select:  
area  
• You use it in a cold room where you have just  
turned on a heater  
• Air conditioning is blowing directly on your player  
• Your player is in a damp place  
If condensation forms inside your player, your  
player will not work correctly. Turn on your player,  
remove the disc and leave the tray open, then leave  
your player on for two to three hours.  
To minimize condensation problems, keep the  
power cord connected to a power outlet.  
Dynamic—Uses DHCP to automatically  
obtain an IP address.  
Manual—Lets you manually configure  
network settings, such as IP address, subnet  
mask, and gateway settings.  
Off—Disables the network interface.  
6 Press to go to the previous menu.  
Storing discs  
• Do not store discs in a place that is exposed to  
direct sunlight or heat.  
• Do not store discs in a place that is exposed to  
moisture and dust, such as a bathroom or near a  
humidifier.  
• Store discs vertically in their cases. Stacking discs  
or placing objects on discs when not in their cases  
may cause warping.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
NS-BRDVD3-CA Blu-Ray Disc Player  
Handling discs  
Question  
Answer  
• To keep a disc clean, do not touch the play side  
Can I play Blu-ray Discs and DVDs that No. Region codes indicate that a disc  
(non-label side) of the disc.  
do not have a region code?  
conforms to industry standards. You  
cannot play a disc that does not have  
a region code.  
• Do not attach paper or tape to the disc.  
What types of discs will my player  
play?  
Your player can play:  
Blu-ray Discs  
DVD-Video, DVD-RAM (DVD  
Video Recording format,  
AVCHD format, and JPEG  
format), DVD-R/RW (DVD  
Video format and DVD Video  
Recording format), DVD-R DL  
(DVD Video format and DVD  
Video Recording format),  
DVD+R, DVD+RW, and  
DVD+R DL  
Cleaning discs  
• Before playback, wipe the disc outwards from the  
center (not in a circle) with a clean cloth.  
Audio CD  
CD-R/RW discs which have  
been recorded in one of the  
following standards: CD-DA  
and still pictures (JPEG).  
Close the session after  
recording.  
Note: Your player cannot write to  
discs.  
FAQ (frequently asked  
questions)  
Troubleshooting  
Check the following information for the possible  
cause and solution for a problem before contacting  
the nearest service center or dealer for repairs.  
Question  
Answer  
What do I need to play multi channel Connect the appropriate  
The following do not indicate a problem with your  
player:  
• Regular disc rotation sounds.  
surround sound?  
amplifier/receiver to the HDMI jack,  
the DIGITAL AUDIO OUT jack  
(OPTICAL or COAXIAL).  
Can I connect headphones to my  
player?  
You cannot directly connect  
headphones to your player. Connect  
headphones to the connected TV or  
sound system.  
• Image disturbance during search.  
Resetting your player  
To reset your player:  
My television has COMPOSITE VIDEO HDMI provides the best video and  
IN, COMPONENT(YUV) IN and HDMI IN audio. Component video provides  
• If your player “freezes,” press STANDBY/ON on  
the front of your player. Wait five seconds then  
press STANDBY/ON again. This resets your  
player but does not change any settings.  
• To reset all settings (include parental control  
settings) to the factory default, select Reset  
Settings in the System menu.  
jacks.  
better video than composite video,  
but not as good as HDMI video.  
Composite video provides good video.  
Note: When you connect a TV using  
HDMI, the picture takes longer to  
display.  
Can I play Blu-ray Discs and DVDs  
bought in another country?  
You can play them if the video  
standard is NTSC. However, you  
cannot play:  
Power  
Blu-ray Discs that do not  
include region code A.  
DVDs that do not include  
region code 1 or ALL.  
Problem  
No power  
Solution  
Make sure that the power cord is  
plugged into a power outlet and that  
the outlet is supplying power.  
Region codes are on the discs or disc  
packaging.  
The player switches to standby mode After a period of inactivity, your player  
switches to standby mode  
automatically. This is a power saving  
feature.  
If your player switches to standby  
mode unexpectedly, a safety device  
may have been activated. Press  
STANDBY/ON on the front of your  
player.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Blu-Ray Disc Player  
Operation  
Problem  
Solution  
The player is on and the logo and  
menu appear, but there is no image  
from the disc  
Make sure that the disc is not  
Problem  
Remote control does not work  
Solution  
dirty. For instructions on  
cleaning a disc, see  
Make sure that you are  
pointing the remote control  
at the remote control sensor  
on the front of your player.  
Make sure that there are no  
obstructions between the  
remote control and the  
remote control sensor on the  
front of your player.  
“Cleaning discs” on page 18.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 18.  
The player freezes when reading a  
CD-R or DVD-R  
Reset your player. For  
instructions, see “Resetting  
your player” on page 18.  
When you see “loading” on  
the screen, press  
Make sure that there is no  
colored glass between the  
remote control and the  
remote control sensor on the  
front of your player. Colored  
glass, such as the glass door  
of an entertainment center,  
can interfere with signal  
reception.  
(open/close) to open the disc  
tray and remove the disc.  
Clean the disc. (For  
instructions, see “Cleaning  
discs” on page 18), then try  
the disc again.  
If your player freezes again,  
the disc may contain some  
content that is not  
compatible with your player.  
Do no try playing the disc  
with your player.  
Make sure that the remote  
control sensor is not exposed  
to direct sunlight or bright  
light. These can interfere  
with signal reception.  
Replace the batteries.  
Some or all functions do not work  
Some functions are not  
allowed by the disc, for  
example, fast-forwarding  
through the warning  
information at the  
beginning of the disc.  
TV screen and video  
Problem  
Video does not appear on the TV  
screen or the picture is distorted  
Solution  
Make sure that the TV is  
connected to the correct  
jacks on the back of your  
player.  
Condensation may have  
formed inside your player.  
Turn off your player and wait  
one to two hours for the  
condensation to evaporate.  
Reset your player. For  
Make sure that the TV is set  
to the correct video input  
source.  
The TV may be in screen  
saver mode. Check the  
documentation that came  
with the TV for instructions  
about “waking” your TV.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 18.  
instructions, see “Resetting  
your player” on page 18.  
Playback fails to start or starts then  
stops even when (play/pause) is  
pressed  
Make sure that the disc is  
inserted face up in the disc  
tray.  
Make sure that the disc is not  
dirty. For instructions, see  
“Cleaning discs” on page 18.  
The disc may be blank or  
incompatible with your  
player. Try another disc.  
Video is not output in high definition  
High definition video cannot  
be output through the VIDEO  
OUT jack. You must connect  
the TV to your player using  
the COMPONENT OUT jacks  
or HDMI jack.  
Make sure that the correct  
HDMI or component video  
resolution has be selected in  
the Setup menu. See  
“Selecting the video output  
resolution” on page 12.  
Depending on the Blu-ray  
Disc, output from the  
COMPONENT VIDEO OUT  
jacks may be restricted to  
480p.  
Start up is slow and audio and video  
output takes a long time  
If power has been  
interrupted or the power  
cord has just been  
connected, startup is slow.  
This is not a defect.  
If your player is connected to  
the TV with an HDMI cable,  
startup is slow. This is not a  
defect.  
When reading a disc, the disc tray  
opens  
Make sure that the disc is not  
dirty. For instructions, see  
“Cleaning discs” on page 18.  
The disc may be  
incompatible with your  
player. Try another disc.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 18.  
The 4:3 aspect ratio picture expands  
left and right or the picture size is  
incorrect  
Use the TV to change the  
aspect ratio. See the  
documentation that came  
with the TV.  
When using a component  
video cable, set TV Aspect  
to 4:3 Pan & Scan.  
Audio or video pause during playback  
Make sure that the disc is not  
dirty. For instructions, see  
“Cleaning discs” on page 18.  
Reset your player. For  
instructions, see “Resetting  
your player” on page 18.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
NS-BRDVD3-CA Blu-Ray Disc Player  
Other playback problems  
Problem  
Solution  
There is no apparent change in the  
picture quality when the picture  
settings are changed in the Setup  
menu  
Depending on the video  
Problem  
Audio and video pause momentarily  
Solution  
type, changes may not be  
apparent.  
This happens when your  
player is changing chapters  
in a playlist.  
When playing a BD-Live disc, the  
screen is black  
Erase BD Storage. See  
“Erasing BD-Live storage” on  
page 15.  
When playing a disc that is  
recorded on both layers,  
audio and video may pause  
when your player is  
Make sure that your Internet  
connection is working.  
Make sure that the Internet  
cable is connected securely  
and correctly to your player  
and the Internet jack. Some  
discs require an Internet  
connection to play.  
changing layers.  
Blu-ray Disc or DVD does not play  
Make sure that the disc has  
the correct region code.  
Check the rating on the disc.  
You may have set parental  
controls to block that rating.  
Some Blu-ray discs will only  
play over an HDMI  
connection.  
HDMI connections  
Picture-in-Picture (PIP) does not work  
on a Blu-ray Disc  
Make sure that the disc  
supports PIP mode.  
Problem  
The 4:3 aspect ratio picture expands  
left and right or the picture size is  
incorrect  
Solution  
Change TV Aspect to 16:9.  
See “Selecting the TV aspect  
ratio” on page 12.  
Turn on subtitles. See  
“Selecting the subtitle  
language” on page 11.  
Make sure that the disc was  
recorded with subtitles. If  
the disc has subtitles, a  
subtitle option should  
appear on the disc’s menu.  
BD-Live and USB connections  
Problem  
Cannot connect to the Internet  
Solution  
Cannot change the viewing angle  
Some discs are not recorded  
with multiple viewing  
angles. Check the  
Make sure that the BD-Live  
Disc you are using is a legal  
copy.  
Make sure that the USB flash  
drive is connected correctly  
and securely.  
Make sure that the network  
connection is working.  
documentation that came  
with the disc.  
Not all scenes on a disc have  
multiple viewing angles.  
Check the documentation  
that came with the disc.  
After connecting to the Internet,  
cannot download a file  
Erase BD Storage. See  
“Erasing BD-Live storage” on  
page 15.  
Make sure that the Internet  
connection is working.  
Try a different USB flash  
drive.  
Resume function does not work  
If you press (stop) twice,  
the resume information is  
erased.  
Some discs do not support  
the resume function.  
File was downloaded, but playback  
from file pauses  
Make sure that the USB flash  
drive is a USB 2.0 device.  
Using a USB 1.1 device may  
cause pausing.  
Try a different USB flash  
drive.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Blu-Ray Disc Player  
• HD movie files contained on a 1.0/1.1 CD or USB  
flash drive may not play correctly. Blu-ray, DVD, or  
USB 2.0 are recommended to play back HD movie  
files.  
Specifications  
Specifications are subject to change without notice.  
• Your player does not support files that are  
recorded with GMC (Global Motion  
Compensation) or Qpel (Quarter pixel). Those are  
video encoding techniques in MPEG4 standard,  
like DivX or XVID.  
System and outputs  
Media  
BD-ROM, BD-JAVA 1.1, DVD-Video,  
DVD+RW/+R, DVD-RW/-R, CD-RW/-R  
TV signal system  
Video output  
NTSC  
Electric level output: 1.0 Vp-p  
Resistance: 75S  
Output connector: Pin jack (1 system)  
Y output level: 1.0 Vp-p Resistance: 75  
PB output level: 0.7 Vp-p Resistance: 75  
PR output level: 0.7 Vp-p Resistance: 75  
Output connector: Pin jack (Y: green,  
PB: blue, PR: red)(1 set)  
Output format: 480i, 480p, 720p, 1080i  
Output level: 2 Vrms (1 kHz, 0 dB)  
Output connector: Pin jack  
MP3/WMA audio file requirement (USB/DISC)  
• File extensions: .mp3, .wma  
• Sampling frequency: Within 8 to 48kHz (WMA),  
within 11 to 48kHz (Mp3)  
• Bit rate: Within 8-320kbps (WMA, Mp3)  
• CD-R/RW, DVD R/RW, BD-R/RE Format:  
ISO 9660+JOLIET, UDF and UDF Bridge format  
• Maximum Files/Folder: Less than 2000 (total  
number of files and folders)  
• Depending on the size and number of the  
MP3/WMA files, it may take several minutes to  
read the contents of the media.  
• Your player does not support the ID3 Tag  
embedded in the MP3 file.  
• The total playback time indicated on the screen  
may not correct for VBR files.  
Component video (Y, CB,CR)  
Audio output (analog)  
Audio output (digital)  
Number of connectors: 2-channel (1)  
Optical digital output (1)  
Coaxial digital output (pin jack) (1)  
DVD (linear audio):  
Audio performance (frequency  
response)  
4 Hz to 22 kHz (48 kHz sampling)  
4 Hz to 44 kHz (96 kHz sampling)  
CD-Audio: 4 Hz to 20 kHz  
S/N ratio: 90 dB  
Dynamic range: 80 dB  
Photo file requirement (USB/DISC)  
• File extensions: .jpg , .jpeg , .png  
• Recommended size:  
Total harmonic distortion: 0.004%  
• Less than 4,000 x 3,000 x 24 bit/pixel  
• Less than 3,000 x 3,000 x 32 bit/pixel  
• CD-R/RW, DVD R/RW, BD-R/RE Format:  
ISO 9660+JOLIET, UDF, and UDF Bridge format  
• Maximum Files/Folder: Less than 2000 (total  
number of files and folders)  
• Progressive and lossless compression photo  
image files are not supported.  
• Depending on the size and number of the photo  
files, it may take several minutes to read the  
contents of the media.  
HDMI output  
Output format: 480i, 480p, 720p,1080i,  
1080p  
Output Connector: Type A (19 pin)  
General  
Power  
Power consumption  
Dimensions  
L × W × H  
Weight  
110V-120V ~ 50/60Hz  
25 W  
16.93 × 10.0 × 1.89 inches  
(430 × 254 × 48 mm)  
7.5 lbs. (3.4 kg)  
Operating temperature  
Operating humidity  
41°F to 95°F (5°C to 35°C)  
10% to 75%  
Legal notices  
Video file requirement (USB/DISC)  
FCC Part 15  
Video file compatibility with your player is limited  
as follows:  
• Available resolution size: 1920x1080 (W x H) pixels  
• File extensions: .wmv  
• Playable Audio format: Dolby Digital , DTS , MP3 ,  
WMA , AAC , AC3  
• Sampling frequency: within 32 to 48kHz (WMA),  
within 16-48kHz (Mp3)  
• Bit rate: within 20-320kbps (WMA), within  
32-320kbps (Mp3)  
• CD-R/RW, DVD R/RW, BD-R/RE Format: ISO  
9660+JOLIET, UDF and UDF Bridge format  
• Maximum Files/Folder: Less than 2000. The movie  
file name and subtitle are limited to 180  
characters.  
This device complies with Part 15 of the FCC Rules. Operation of  
this product is subject to the following two conditions: (1) this  
device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference  
that may cause undesired operation.  
This equipment has been tested and found to comply within the  
limits for a class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following  
measures:  
• Not all of the WMA and AAC Audio formats are  
compatible with your player.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced technician for help.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
NS-BRDVD3-CA Blu-Ray Disc Player  
FCC warning  
Macrovision  
Changes or modifications not expressly approved by the party  
This product incorporates copyright protection technology that  
is protected by U.S. patents and other intellectual property  
rights. Use of this copyright protection technology must be  
authorized by Macrovision, and is intended for home and other  
limited viewing uses only unless otherwise authorized by  
Macrovision. Reverse engineering or disassembly is prohibited.  
responsible for compliance with the FCC Rules could void the  
user’s authority to operate this equipment.  
DHHS and FDA safety certification  
This product is made and tested to meet safety standards of the  
FCC, requirements and compliance with safety performance of  
the U.S. Department of Health and Human Services, and also  
with FDA Radiation Performance Standards 21 CFR Subchapter J.  
Dolby Laboratories  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol are  
trademarks of Dolby Laboratories.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
DTS, Inc.  
Manufactured under license under U.S.  
Patent #’s: 5,451,942; 5,956,674;5,974,380;  
5,978,762;6,487,535 & other U.S. and  
worldwide patents issued & pending. DTS  
is a registered trademark and the DTS logos, symbol, DTS-HD and  
DTS-HD Advanced Digital Out are trademarks of DTS, Inc.  
1996-2008 DTS, Inc. All rights reserved.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blu-Ray Disc Player  
This warranty also does not cover:  
One-year limited warranty  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility  
authorized by Insignia to service the Product  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been  
altered or removed  
Insignia Products (“Insignia”) warrants to you, the original  
purchaser of this new product (“Product”), that the Product shall  
be free of defects in the original manufacture of the material or  
workmanship for a period of one (1) year from the date of your  
purchase of the Product (“Warranty Period”). This Product must  
be purchased from an authorized dealer of Insignia brand  
products and packaged with this warranty statement. This  
warranty does not cover refurbished Product. If you notify  
Insignia during the Warranty Period of a defect covered by this  
warranty that requires service, terms of this warranty apply.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS  
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS  
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS  
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.  
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES  
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED  
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,  
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET  
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR  
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME  
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO  
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS  
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY  
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE  
OR PROVINCE TO PROVINCE.  
How long does the coverage last?  
The Warranty Period lasts for 1 year (365 days) from the date you  
purchased the Product. The purchase date is printed on the  
receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the  
material or workmanship of the Product is determined to be  
defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product  
with new or rebuilt parts; or (2) replace the Product at no charge  
with new or rebuilt comparable products or parts. Products and  
parts replaced under this warranty become the property of  
Insignia and are not returned to you. If service of Products or  
parts are required after the Warranty Period expires, you must  
pay all labor and parts charges. This warranty lasts as long as you  
own your Insignia Product during the Warranty Period. Warranty  
coverage terminates if you sell or otherwise transfer the Product.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.  
55423-3645  
© 2009 Best Buy Enterprise Services, Inc.  
All rights reserved. INSIGNIA is a trademark of Best Buy  
Enterprise Services, Inc. Registered in some countries. All other  
products and brand names are trademarks of their respective  
owners.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your  
original receipt and the Product to the store you purchased it  
from. Make sure that you place the Product in its original  
packaging or packaging that provides the same amount of  
protection as the original packaging. If you purchased the  
Product from an online web site, mail your original receipt and  
the Product to the address listed on the web site. Make sure that  
you put the Product in its original packaging or packaging that  
provides the same amount of protection as the original  
packaging.  
To obtain in-home warranty service for a television with a screen  
30 inches or larger, call 1-888-BESTBUY. Call agents will diagnose  
and correct the issue over the phone or will have an  
Insignia-approved repair person dispatched to your home.  
Should the Insignia-approved repair person not correct the issue  
on the first call, an Insignia television (size and features to be  
determined by Insignia) will be loaned to you until your TV is  
repaired and returned, at no charge to you. This feature is only  
available to Insignia television consumers residing in the United  
States.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the  
product in the United States, Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
Accident  
Misuse  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product, including the  
antenna  
Plasma display panel damaged by static (non-moving)  
images applied for lengthy periods (burn-in).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
(877) 467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, MN USA 55423-3645  
© 2009 Best Buy Enterprise Services, Inc.  
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.  
All other products and brand names are trademarks of their respective owners.  
ENGLISH  
09-0845  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Portable Speaker C255ES User Manual
Insignia Speaker System NS B1110 User Manual
Intel Laptop Armada M300 User Manual
Jackson Dishwasher AJ 44 User Manual
Jensen Speaker JX1000 User Manual
Karcher Pressure Washer K 228 User Manual
Kathrein Satellite TV System UFD 170 User Manual
Kenmore Electric Shaver 62538356 User Manual
Keys Fitness Bicycle CardioMax 535 User Manual
King Canada Router KRT 2000 User Manual