17’’[16:9] AV/TV/PC MONITOR
MULTI-COLOR SYSTEM TV TUNER
DTV-171
Operation Manual
Please read carefully before use.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated ’’dangerous
voltage’’ within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within a triangle is intended to alert the user to the
presence of important operation and maintenance (servicing) instructions
in the literature accompanying the product.
FCC RF INTERFERENCE STATEMENT
NOTE:
This equipment has been tested and found to comply with the limit for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does not cause harmful interference to radio or television reception which
can be determined by turning the equipment off and on, the user is encourage to try to
correct the interference by one or more of the following measure.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Correct the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio, TV technical for help.
Only shielded interface cable should be used.
page1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY PRECAUTIONS
The present set has been designed and manufactured to assure personal safety. Improper use
can result in electric shock or fire hazard. The safeguards incorporated in the present unit will
protect you if you observe the following procedures in installing, using and servicing. The present
unit is fully transistorized and does not contain any element that can be repaired by the user.
1. Read these instructions - All operating instructions must be read and understood before the
product is operated.
2. Keep these instructions - These safely and operating instructions must be kept in a safe place
for future reference.
3. Heed all warnings - All warnings on the product and in the instructions must be observed closely.
4. Follow instructions - All operating instructions must be followed.
5. Attachment - Do not use attachments not recommended by the manufacturer. Use of inadequate
attachments can result in accidents.
6. Power source - This product must operate on a power source specified on the model label. If
you are not sure of the type of power supply used in your home, consult your dealer or local
power company.
7. AC cord protection - The AC cords must be routed properly to prevent people from stepping on
them or objects from resting on them. Check the cords at the plugs and product.
8. Overloading - Do not overload AC outlets or extension cords. Overloading can cause fire or
electric shock.
9. Entering of objects and liquids - Never insert an object into the product through vents or
openings. High voltage flows in the product, and inserting an object can cause electric shock
and/or short internal parts. For the same reason, do not spill water or liquid on the product.
10. Servicing - Do not attempt to service the product yourself. Removing covers can expose you
to high voltage and other dangerous conditions. Request a qualified service person to
perform servicing.
11. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and
request a qualified service person to perform repairs.
a) When the AC cord or plug is damaged.
b) When a liquid was spilled on the product or when objects have fallen into the product.
c) When the product has been exposed to rain or water.
d) When the product does not operate properly as described in the operating instructions. Do
not touch the controls other than those described in the operating instructions. Improper
adjustment of controls not described in the instructions can cause damage, which often
requires extensive adjustment work by a qualified technician.
e) When the product has been dropped or damaged.
page2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY PRECAUTIONS
f) When the product displays an abnormal condition. Any noticeable abnormality in the product
indicates that the product needs servicing.
12. Replacement parts - In case the product needs replacement parts, make sure that the service
person uses replacement parts specified by the manufacturer, or those with the same
characteristics and performance as the original parts. Use of unauthorized parts can result in
fire, electric shock and/or other danger.
13. Safety checks - Upon completion of service or repair work, request the service technician to
perform safety checks to ensure that the product is in proper operating condition.
14. Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install
the product according to the method recommended by the manufacturer.
15. Unplug the AC cord from the AC outlet before installing the speakers.
16. Cleaning - Unplug the AC cord from the AC outlet before cleaning the product. Use only with
a dry cloth to clean this apparatus. Do not use liquid or aerosol cleaners.
17. Water and moisture - Do not use this product near water such as bathtub, washbasin, kitchen
sink and laundry tub, swimming pool and in a wet basement. TV set shall not be exposed to
dripping or slashing and no objects filled with liquid, such as vases, shall be placed on the TV
set.
18. Stand - Do not place the product on an unstable cart, stand, tripod or table. Unstable installation
is likely to make the product fall resulting in serious injuries as well as material damage. Use
only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.
19. When a cart is used, use caution when moving the cart/apparatus combination to void injury
from tip-over.
20. Ventilation - The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block them since insufficient ventilation can overheat and/or shorten the product¡fls
life span. Do not place the product on the bed, sofa, rug or other similar surfaces since they
can block ventilation openings. This product is not designed for built-in installation; do not
place the product in an enclosed place such as a bookcase or rack unless proper ventilation
is provided or the manufacturer’s instructions are followed.
21. The LCD panel used in this product is made of glass. Therefore, it can be broken when the
product is dropped or gets shock. Be careful not to be injured by glass pieces in case the
panel is broken.
22. Heat sources - Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
23. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving
you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a
fixed blue, green or red point. Please note that this does not affect your product’s performance.
page3
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIED ACCESSORIES
Make sure the following accessories are provided with the product.
Power adapter
AV cable
17 [16:9] AV/TV/PC MONITOR
MULTI-COLOR SYSTEM TV TUNER
DTV-171
Operation Manual
Please read carefully before use.
Remote control
User guide
page4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
INSERTING BATTERIES INTO THE REMOTE CONTROL
Insert supplied batteries via the battery compartment on the back of the remote control.
Make sure polarity matches the (+) and (-) marks inside the compartment.
+
-
-
+
USING THE REMOTE CONTROL UNIT
●
Use the remote control by pointing it towards the remote
sensor on the TV. Objects between the remote control and
the sensor may disrupt operation.
●
Effective range is 20 feet but is dependant on what your
viewing angle is.
●
Range can also be affected by direct sunlight on the TV’s
30
30
sensor.
CAUTIONS REGARDING REMOTE CONTROL UNIT
●
Do not expose remote to liquids, direct sunlight or shock.
●
The remote control unit may not work properly if the remote sensor window of the Display is
under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display,
or operate the remote control unit closer to the remote sensor window.
page5
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
FRONT VIEW
EJECT
4
5
PLAY
OK
LCD MENU
6
7
PREV
CH
NEXT
8
9
VOL
2
3
1
1) POWER BUTTON: Use to turn the unit on and off.
2) REMOTE SENSOR
3) SOURCE BUTTON: Use to select the AV signal source between: DVD, Analog RGB (PC input),
Composite Video, S-Video, TV, Component Video, and use the OK button to confirm.
4) EJECT BUTTON: Use to eject the disc being played in the disc slot.
5) PLAY BUTTON: Use to begin the DVD playback.
6) LCD MENU: Use to bring up the LCD adjustment menu; use the cursor buttons to select an
item and use the left or right button to adjust it.
7) PREV/NEXT (CH+/-): To skip to the previous/next chapter (previous/next channel).
8) DISC SLOT: Insert a DVD or CD disc to play under DVD status.
9) VOLUME+/-: Use to adjust the volume.
page6
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
REAR VIEW
ANT
VIDEO
L
1
2
AV1 IN
R
S-VIDEO
L
R
AV2 IN
3
VIDEO
L
AV OUT
4
5
R
PHONES
8
7
6
DC IN
VGA
L / R
C
R /
PR
CB /
PB
Y
COMPONENT VIDEO /
PROGRESSIVE SCAN OUT
AV3 IN
1) ANTENNA IN
2) AV1 IN (Composite Video and Audio In)
3) AV2 IN (S-Video and Audio In)
4) AV OUT (Composite Video and Audio Out)
5) PHONES
6) AV3 IN (Component Video and Audio In)
7) VGA (PC Input)
8) DC IN
page7
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
REMOTE CONTROL
32
31
1
2
3
30
29
28
4
5
27
6
7
8
26
25
24
23
9
10
11
12
22
13
14
21
20
19
15
16
18
17
1) POWER: Use to turn the unit on and off.
2) Number Buttons: Use to set the channel and to enter DVD chapter numbers.
3) MENU: Use to bring up the DVD root menu.
4) Cursor Buttons: Use to select what you want.
5) OK: Use to confirm your selections.
6) SETUP: Use to bring up DVD setup menu.
7) SOURCE: Use to bring up the AV signal source selection screen and use the
/
buttons to
select between: DVD, Analog RGB (PC input), Composite Video, S-Video, TV, Component
Video, and press the OK button to confirm.
page8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL OVERVIEW
REMOTE CONTROL (CONTINUED)
8) MUTE: Mute the sound.
9) PLAY:Use to begin the DVD playback.
10)PAUSE:Use to pause the DVD playback.
11) FF/FR: Use to play DVD fast forward/backward.
12) SLOW: Use to slow the DVD playback speed.
13) AUTO: Auto adjustment for PC signals.
14) REPEAT: Use to repeat the DVD playback.
15) A-B: Use to repeat play some part of DVD by setting begin point and ending point.
16) AUDIO: Use to shift DVD audio language.
17) SUBTITLE: Use to shift DVD subtitle language.
18) ANGLE: Use to shift DVD viewing angle.
19) A. MODE: Use to shift the DVD playback audio mode.
20) P. MODE: Use to shift DVD play mode.
21) RETURN: Return to the previous menu screen.
22) OSD: Use to bring up the DVD On-Screen-Display.
23) SLEEP: Set the sleep timer.
24) PREV/NEXT: Use to skip to the previous/next chapter.
25) STOP: Use to stop the DVD playback.
26) LAST: Press to return to the previous channel in normal viewing mode.
27) TV MENU: Use to bring up TV menu.
28) TITLE: Use to bring up the DVD title menu.
29) TIME SEARCH: Use to go to a special point of DVD by entering time number.
30) CH+/-:Use to skip to the previous/next channel.
31) VOLUME+/-: Use to adjust the volume.
32) EJECT( ):Use to eject the disc being played in the disc slot.
page9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
MAIN CONNECTION
DC IN
VGA
L / R
CR /
PR
C
B /
P
B
Y
COMPONENT VIDEO /
PROGRESSIVE SCAN OUT
AV3 IN
Plug the mains cable into the power socket with AC100V~240V, 50/60Hz.
ANTENNA CONNECTION
ANTENNA CABLE
ANT
VIDEO
L
AV1 IN
R
S-VIDEO
L
R
AV2 IN
VIDEO
L
AV OUT
R
PHONES
Using the supplied antenna cable, connect the room antenna terminal to the antenna input
terminal on TV set.
page10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
CONNECTING EXTERNAL EQUIPMENT
You can enjoy picture and sound by connecting VCR, DVD player and PC to the terminals located
on the back of TV set.
Before connecting an external device, turn the TV set off to avoid any possible damage.
ANT
Video Cable
VIDEO
L
AV1 IN
L
Audio Cable
R
R
S-Video Cable
S-VIDEO
L
R
AV2 IN
L
Audio Cable
R
AV Equipments (DVD, VCR...)
VIDEO
VIDEO
AUDIO
DC IN
VGA
L / R
C
R
/
P
R
C
B
/
P
B
Y
L
AV OUT
COMPONENT VIDEO
/
PROGRESSIVE SCAN OUT
TV Monitor
L
AV3 IN
R
R
PHONES
Headphone
Y/PB/PR Cable
DVD Player
Personal Computer
1. Connect a PC computer to the LCD through the VGA socket, press the SOURCE button on
the remote to bring up Source selection screen, use the / buttons to select "PC" and press the
OK button to confirm.
2. Connect AV equipment to the LCD through the AV1 IN jacks (Composite Video and Audio In
jacks), press the SOURCE button on the remote to bring up Source selection screen, use the
/ buttons to select "Composite Video" and press the OK button to confirm.
3. Connect AV equipment to the LCD through the AV2 IN jacks (S-Video and Audio In jacks), press
the SOURCE button on the remote to bring up Source selection screen, use the / buttons to
select "S-Video" and press the OK button to confirm.
4. Connect AV equipment to the LCD through the AV3 IN jacks (Component Video and Audio In
jacks), press the SOURCE button on the remote to bring up Source selection screen, use the
/ buttons to select "Component Video" and press the OK button to confirm.
page11
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
POWER
SOURCE
SOURCE
POWER
TURNING ON THE POWER
1. Press POWER button on the front panel to turn on the TV set. The STANDBY/ON indicator
lights up green.
2. If the STANDBY/ON indicator still lights up red, press POWER on the remote control to turn
the TV set on.
TURNING OFF THE POWER
1. Press POWER on the remote control, the image on the screen disappears and the
STANDBY/ON indicator changes from green to red.
2. Press the POWER button on the front panel to turn the TV set off.
NOTE: Weak electric power is still consumed even when the power is turned off.
TV/AV MODE SELECTION
By pressing the SOURCE on the TV set and confirming by the OK button, you can change the
mode as follows:
DVD →Analog RGB (PC input) → Composite Video→ S-Video→ TV→ Component Video→….
page12
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV
TURNING ON THE POWER
1. Press POWER button on the front panel to turn on the TV set. The STANDBY/ON indicator
lights up green.
2. If the STANDBY/ON indicator still lights up red, press POWER on the remote control to turn
the TV set on.
TURNING OFF THE POWER
1. Press POWER on the remote control, the image on the screen disappears and the
STANDBY/ON indicator changes from green to red.
2. Press the POWER button on the front panel to turn the TV set off.
NOTE: Weak electric power is still consumed even when the power is turned off.
SIMPLE BUTTON OPERATIONS FOR CHANGING CHANNELS
You can change channels in several ways.
Using CH+/- on the remote unit
CH+/-
EJECT
PLAY
OK
LCD MENU
PREV
CH
C
CH+/-
NEXT
VOL
1. Press CH+ to increase channel number.
2. Press CH- to decrease channel number.
NOTE: CH+/- on the TV set operates the same as CH+/- on the remote unit.
page13
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV
Using number buttons on the remote unit
NUMBER BUTTONS
Select the channels directly by pressing the number buttons.
EXAMPLE:
To select a 1-digit channel (e.g. channel 2):
Press 2 .
To select a 2-digit channel (e.g. channel 12):
Press 1 ,followed by 2 .
USING LAST ON THE REMOTE UNIT
LAST
Press LAST to switch the currently tuned channel to the previous tuned channel.
Press LAST again to switch back to the currently tuned channel.
page14
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV
SIMPLE BUTTON OPERATION FOR CHANGING VOLUME/SOUND
Changing the volume
You can change the volume on the front panel or on the remote control unit.
VOLUME+/-
1. Press VOL+ to increase the volume.
2. Press VOL- to decrease the volume.
Using MUTE on the remote control
Press MUTE to mute the current sound output.
MUTE
1. Press MUTE . ’’MUTE’’ will display on the screen.
2. Press MUTE again to cancel the mute.
page15
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
CHANNEL ADJUSTMENT
Press TV MENU to bring up the TV menu screen.
Press
/
to select "Channel" and press to enter into the items below ’’Channel’’.
Automatic channel search
Channel auto search finds and memorizes all channels viewable in your area. Select one
between AIR and CABLE before this operation.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
to select ’’Channel’’.
/
/
to select ’’Auto Search’’.
to begin the searching. Wait until the searching ends.
NOTE: The illustrations and on-screen displays in this manual are for explanation purposes and
may vary from the actual operations.
Manual Search
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
/
/
to select ’’Channel’’.
to move to "Manual Search".
4. Press to enter "Manual Search" screen.
5. Press
/
to enable search; press OK to return;press TV MENU to exit.
page16
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
CHANNEL ADJUSTMENT (CONTINUED)
Current channel number selection
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
to select ’’Channel’’.
/
to select ’’Current Channel’’.
/
to select a current channel number you want.
Fine tuning
If you are unable to get a good picture or sound because of a poor broadcast signal, you may
adjust the channel by Fine Tuning.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
/
to select ’’Channel’’.
to select ’’Fine Tune’’.
/
4. Press to enter "Fine Tune" screen.
5. Press to tune for a better picture and sound; press OK to return;press TV MENU to exit.
/
Target channel
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
to select ’’Channel’’.
/
to select ’’Target Channel’’ .
to select a target channel number.
/
Channel skip
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
to select ’’Channel’’.
/
to move to "Channel Skip".
to select between "On"and "Off ".
/
Exchange
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
to select ’’Channel’’.
to move to "Exchange".
to change.
/
/
page17
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
PICTURE ADJUSTMENT
Press TV MENU to bring up the TV menu screen.
Press
/
to select ’’Picture’’ and press to enter into below items.
Contrast
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Contrast’’.
to adjust the picture contrast.
Brightness
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
Color
/
/
/
to select ’’Picture’’.
to move to ’’Brightness’’.
to adjust the picture brightness.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Color’’.
to adjust the picture color.
Sharpness
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Picture’’.
to move to ’’Sharpness’’.
to adjust the picture sharpness.
page18
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
AUDIO ADJUSTMENT
Press TV MENU to bring up the TV menu screen.
Press
/
to select ’’Audio’’ and press to enter into below items.
off
on
down for audio settings
Volume
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
Bass
/
/
/
to select ’’Audio’’.
to move to ’’Volume’’.
to adjust the volume.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
Treble
/
/
/
to select ’’Audio’’.
to move to ’’Bass’’.
to adjust the bass weaker or stronger.
To stress high frequency sound
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Treble’’.
to adjust the treble weaker or stronger.
page19
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
AUDIO ADJUSTMENT (CONTINUED)
Balance
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
Mute
/
/
/
to select ’’Audio’’.
to move to ’’Balance’’.
to adjust audio output between left and right speakers.
This function is to remove the sound.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Mute’’.
to select ’’Off’’ or ’’On’’.
Sound System
This function is to select the sound appropriate to your TV program.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Audio’’.
to move to ’’Sound System’’.
to select among DK, I, Auto and BG.
page20
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
WINDOW ADJUSTMENT
PC mode input format
Resolution
V freq. (Hz)
H freq. (KHz)
60
72
75
85
70
31.5
37.9
37.5
43.3
31.5
640 480
640 480
640 480
640 480
720 400
VGA
60
75
85
72
60
70
75
37.9
46.9
53.7
48.1
48.4
56.5
60.2
800 600
800 600
800 600
800 600
1024 768
1024 768
1024 768
SVGA
XGA
In case of inputting the PC signal other than above signals, ’’OUT OF RANGE’’ will display.
Setup your PC software
Even if your actual display-setting screen looks different from the windows below, basic setup
methods will be applied in most of the case.
1. First, click on ’’Setting’’ on the Windows Start menu. While ’’Setting’’ is selected, move the cursor
to submenu ’’Control Panel’’.
page21
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
WINDOW ADJUSTMENT (CONTINUED)
2. When the control panel screen appears, click on ’’Display’’ and a display dialog box displays.
3. Navigate to the ’’Setting’’ tab on the display dialog box. The correct setting of size (resolution) is
’’1024 x 768 pixels’’.
Check the vertical frequency of your PC.
page22
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
WINDOW ADJUSTMENT (CONTINUED)
Press TV MENU to bring up the TV menu screen.
Press
/
to select ’’Window’’ and press
to enter into below items.
window
fill all
image size
h position
H-Position
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Window’’.
to move to ’’H-Position’’.
to adjust the horizontal position of displayed image.
Before adjustment
After adjustment
Image Size
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Window’’.
to move to ’’Image Size’’.
to select an image size between:Fill All and Force 4:3.
page23
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU ADJUSTMENT
OPTIONS ADJUSTMENT
Press TV MENU to bring up the TV menu screen.
Press
/
to select ’’Options’’ and press to enter into below items.
Menu Background
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Options’’.
to move to ’’Menu Background’’.
to select the menu background between:Translucent and Opaque.
Menu Language
You can select a language from Function menu as well. Select one between English and
Chinese.
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
4. Press
/
/
/
to select ’’Options’’.
to move to ’’Language’’.
to select the language between English and Chinese.
Reset Date
1. Press TV MENU to bring up the TV menu screen.
2. Press
3. Press
/
/
to select ’’Options’’.
to move to ’’Reset Data’’.
4. Press to reset all settings to factory setting.
page24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Please check the following items before asking for repair service.
Symptom
Neither picture nor
sound.
Check Items
- Check the contact of sockets is all right.
- Check the TV main power is on.
Picture is OK, but no
sound.
- Check the volume control is set to minimum or mute.
- Check the color control and adjust it properly.
Sound is OK, but no
color.
- Check the programme is in color or in black & white.
-Check the antenna is installed correctly and if not, adjust the antenna
toward the broadcasting station.
The picture is
overlapped image.
-Check the ’’FINE TUNE ’’is set up correctly and if not, adjust the fine
tuning properly.
- Check the antenna or its connection is correct and if not, correct the
antenna fault or connection cable fault.
Picture has ’’snow
noise ’’.
- Check if car traffic or neon sign disturbs the sound effect.
- Check the susceptible interference by other electronic devices such
as radio and television and keep magnetic or electronic devices away
from the TV.
Stripes on picture.
Bad stereo or SAP
sound.
- Long distance from the station or other radio waves can generate bad
sound. Reception. If so, change the mode to Mono.
- Check if the batteries in the Remote control die.
Remote control does
not work.
- Check if any object between IR sensor of the TV and the Remote
control does not obstruct.
- Check the resolution and frequency of your PC. Then, adjust them to
optimum condition for LCD TV: 1024X768 and 60Hz.
’’Out Of Range’’
appears on the
screen.
- Refer to the table of PC mode input format indicated on page 21. (Not
being registered resolution and frequency on the table won’t be displayed.)
’’No Signal’’ appears
on the screen.
-Ensure that the signal cable is firmly connected to PC and TV.
-Adjust the PHASE control. (Refer to the PC ADJUSTMENT.)
Image is not clear.
Image is not
centered.
- Adjust the H-POSITION, H-SIZE and V-POSITION Control. (Refer to
the PC ADJUSTMENT.)
page25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
PANEL
17’’ WIDE TFT LCD
1280 X RGB X 768 (WXGA)
372.5 X 223.5
RESOLUTION
LCD
ACTIVE AREA (mm)
VIEWING ANGLE (¡,U/D/L/R)
BRIGHTNESS (cd/m2)
WITH STAND (mm)
45/45/60/60
450
532 X 352 X 185
532 X 297 X 58
DIMENSION
WITHOUT STAND (mm)
WEIGHT (WITHOUT ACCESSORIES)
TV STANDARD
13.7lbs (6.6kg)
NTSC/PAL
TUNING SYSTEM
ELECTRIC TUNING SYSTEM
MTS + SAP
TV-FUNCTION
STEREO
CATV
125 CHANNELS
DC12V, AC100-240V~, 50/60Hz
2W + 2W
INPUT POWER
SOUND OUTPUT
POWER CONSUMPTION
AV IN
44W
VIDEO, S-VIDEO, AUDIO L&R
Y, Pb (Cb), Pr (Cr)
VIDEO OUT
COMPONENT
MONITOR OUT
TERMINALS
HEADPHONE
PC IN
3.5¿ STEREO MINI-JACK
D-SUB 15PIN RGB IN
F-TYPE
ANTENNA IN
page26
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS (FOR DVD PLAYER)
BASIC OPERATIONS
PLAY DISCS
27-31
27
PAUSE
27
OSD
27-30
30
VOLUME CONTROL
DVD MENU PLAY
SELECT WITH NUMBER BUTTONS
PLAY DISCS IN VARIOUS WAYS
AUDIO MODE
30
31
31-37
31-32
32
MUTE
FAST PLAY
32
SLOW PLAY
33
REPEAT PLAY
33-34
34
SELECT SUBTITLES
ANGLES SELECT
TIME SEARCH
35
35-36
36-37
37
PROGRAM PLAY
SHUFFLE (RANDOM) PLAY
MENU SETTING
38-43
39-40
40-42
42
GENERAL SETUP
AUDIO SETUP
VIDEO SETUP
PASSWORD SETUP
PREFERENCES
42
43
MP3 OPERATIONS
KODAK PICTURE CD PLAYBACK
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
43
44
45
46
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
DVD
CD
DVD
CD
Pause
Play Discs
Press
1. Press POWER to turn on the unit.
2. Press the SOURCE button on the remote
control to bring up the AV signal source
PAUSE
selection screen and use the
/
buttons
to select "DVD", press the OK button to
confirm.
3. Insert a disc into the disc slot, with the
label side facing to yourself.
4. The unit begins to read the disc.
5. Press (PLAY) to play the disc.
DVD
To pause playback of a DVD while it is playing,
press .The unit enters step play status. Each
AFTER STEP 4 IS FINISHED:
time you press
, the picture advances one frame.
If playing a DVD, the TV screen shows DVD menu or
title menu.
CD
If playing a CD, press (PLAY), and the unit plays
the disc according to the track numbers.
5. Stop playback.
Press
to make playback pause.
Press (PLAY)to resume playback.
Press
.
DVD
CD
OSD
OSD
6. Press the button on the remote control to remove the
disc and turn off the unit.
You have to push " " button twice to stop playback
of a DVD disc.
The On-Screen Display (OSD) contains many playback
features.To see the Display, press the OSD button on
the remote while a disc is playing. The Display appears
across the top of the screen.Each feature is illustrated with
an icon. Use the or buttons on the remote to move
through the different icons in the Display.
When an icon is highlighted, use the or butons on the
remote to scroll through the choices displayed in the text
box under the icons.
page27
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
Remember, you can only access the Display when you're
playing a disc. Also, the Display features are only
available if the disc was created with that particular
feature (i.e., if you select the Subtitle icon, you won't be
able to change the subtitle language unless the author of
the disc created the disc with subtitles).
2. Press the or buttons to highlight the Chapter icon.
3. Press the or buttons to go to the previous or next
chapter.
Notes: The chapter feature won't work if the disc isn't
formatted with separate chapters.
You can also advance to the next chapter by pressing
on the remote and go to the preceding chapter by
The invalid symbol " " appears on the screen when you
press a button that doesn't have any function. If one of
the icons is "grayed out ",that Display feature isn't
available for the disc you're playing. To make the Display
disappear from the screen, press OSD on the remote.
pressing
on the remote.
Changing the Audio Language
If the disc was created with different language tracks
(recorded in different languages), you can use the Display
to temporarily change the DVD player's Audio Language
setting.
DVD
1. While the disc is playing, press OSD on the remote
to bring up the Display.
DVD discs have the following playback features:Title,
Chapter, Audio, Subtitle, Angle and Repeat.
Select a Title
2. Press the or buttons to highlight the Audio icon.
The current audio language appears in the text box
below the row of icons.
Some discs contain more than one title. For example,
there might be four movies on one disc (each movie might
be considered a title).
3. Press the or buttons to scroll through the audio
languages that are available on the disc until the audio
language you want to use appears in the text box.
Audio will be played in that language.
Each title is divided into chapters. To select a title:
1. While the disc is playing, press OSD on the remote
to bring up the Display.
4. To make the Display disappear, press the OSD button
on the remote.
2. If the Title icon on the Display isn't highlighted, use the
or buttons to highlight it.
Note: The language feature only works if the disc was
created with multiple audio tracks. When you choose an
audio language from the Display, you only override the
audio language setting in the DVD player's main menu
temporarily.
3. Press the or buttons to go to the previous or next
title.
Note: Some discs only have one title.
Select a Chapter
The audio language can also the changed through the
DVD player menu.
Because DVD discs use digital technology, a title can be
divided into individual chapters (similar to tracks on a CD).
You can skip to a specific chapter by using the Chapter
feature in the Display.
Selecting the Subtitle Language
If the disc was created with subtitles, you can use the
Display to change the Subtitle language.
1. While the disc is playing, press OSD on the remote
to bring up the Display.
page28
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
All - repeats the disc that is playing
Title - repeats the title that is playing
Chapter - repeats the chapter that is playing
To Use Repeat:
1. When the disc is playing, press OSD on the remote
to bring up the Display.
2. Press the or buttons to highlight the Subtitle icon.
3. Press the or buttons to scroll through the subtitle
languages that are available on the disc until the
subtitle language you want to use appears in the text
box. The subtitles will be shown in that language.
4. To make the Display disappear, press the OSD button
on the remote.
1. While a disc is playing, press OSD on the remote to
bring up the Display.
2. Highlight the Repeat icon.
3. Press the or buttons to scroll through the Repeat
options until the Repeat option you want is displayed in
the text box.
4. The selected repeat option will loop repeatedly until
you turn Repeat off.
Notes: Changing the subtitle language with the Display
will only affect the disc currently being played. When the
disc is removed or the player is turned off, the subtitle
language will revert to the language setting specified
through the DVD player main menu.
How to Cancel Repeat:
There are three ways to cancel Repeat:
Press STOP twice.
Go to Repeat icon in the Display and select Off.
Eject the disc.
The subtitle language can also be changed through the
DVD player menu.
CD
LAYING CD
Changing the Camera Angle
CD discs have the following playback features: Track,
L/R, and Repeat.
Some discs contain multiple angles of a particular scene
or sequence. If the disc only has one angle, this feature
won't work. When multiple angles are available, to
change the camera angle:
Select a Specific Track
1. While the disc is playing, press OSD on the remote
to bring up the Display.
1. When a disc is playing, press OSD on the remote to
bring up the Display.
2. Highlight the Track icon.
3. Press the or buttons to scroll through the track
numbers.
2. The Angle icon will display the number of angles
available. For example, if there are 3 different angles,
the icon will read 1 of 3, This means angle 1 is
currently being played.
Changing the Audio Channel Output
If you are playing a Stereo CD, you can change the
channel output from the player.
1. Press OSD on the remote to bring up the Display.
2. Highlight the L/R icon on the Display.
3. The audio channel choices appear in the text box.
Press the or buttons to scroll through the choices:
LEFT MONO, RIGHT MONO, MIXED MONO or
STEREO. Whatever choice is displayed becomes the
active choice.
3. Press the or buttons to scroll through the angle
choices. The angle number displayed in the text
window is automatically shown.
4. To make the Display disappear, press the OSD button
on the remote.
Using the Repeat Feature
Using the Repeat Feature
The default mode for the Repeat feature is off. There are
three Repeat options:
The default mode for the Repeat feature is off. There are
two Repeat options for CDs:
All - repeats the disc that is playing
Track - repeats the track that is playing
page29
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
DVD
To Use Repeat:
DVD Menu Play
1. While a disc is playing, press OSD on the remote
to bring up the Display.
2. Highlight the Repeat icon.
Some DVDs have title menus and chapter menus.
Press (PLAY), the screen shows the menu.
3. Press the or buttons to scroll through the
Repeat options until the Repeat option you want is
displayed in the text box.
Press
or
to skip to the next or previous page.
Select with number buttons or direction buttons.
4. The selected repeat option will loop repeatedly until
you turn Repeat off.
1.
Root
Menu
2.
Volume Control
11.
DVD
CD
Example: select track 13.
Press VOLUME on the TV or amplifier to adjust the
volume.
1. Press
to enter the next menu.
Press VOLUME on the remote control.
12.
Root
Menu
13.
14.
15.
VOLUME+,-
2. Press number buttons to select directly.
+
3
+10
1. Press + to raise the volume.
You can also select as follows:
1. Press to select track 13.
2. Press - to lower the volume.
12.
13.
14.
15.
Root
Menu
2. Press (PLAY) to start playing track 13.
Press TITLE once to return to the title menu.
Press MENU once to return to the root menu.
page30
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
PLAY DISCS IN VARIOUS WAYS
Select with Number
DVD
CD
Audio Mode
Buttons
CD
You may select a language from a multi-language DVD.
You may select the right channel, left channel, or stereo
options from a multi-channel CD.
Load a disc. Press number buttons to select tracks after
the unit finishes reading the disc.
1. If the track number isn't over 10, just
push buttons 1-10.
A.MODE
AUDIO
Example: push 8 to select track 8.
DVD
8
To select a language, press AUDIO .
The screen will show the following in order:
AUDIO 1/2:AC-3 5.1CH
The screen shows:
TRACK08/20 00:00
AUDIO 2/2:AC-3 5.1CH
2. If the track number is over 10, press + 10 once and a
button between 1-10.
Different discs may differ in languages available.
To select audio channel option, press A.MODE ,
the screen shows the following in order:
Example: if you select track 12, press +10 once and
button 2 .
A.MODE
MONO LEFT
+
2
+10
A.MODE
MONO RIGHT
The screen shows:
A.MODE
MIXED MONO
TRACK12/20 00:00
A.MODE
STEREO
page31
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
CD
Fast Play
DVD
CD
To select audio channel option when for CD playback,
press A.MODE . The screen will show the following in
order:
When playing a disc, you can play it in fast-forward or
fast-reverse mode to find what you want to view.
A.MODE
MONO LEFT
DVD OR CD
1. While disc is playing, press
to play in fast-forward
A.MODE
mode. Each time you press the button, the screen shows
the following in order:
MONO RIGHT
2X
4X
A.MODE
FF
MIXED MONO
8X
16X
32X
A.MODE
STEREO
2. While disc is playing, press
to play in fast-reverse
mode. Each time you press the button, the screen shows
the following in order:
You may select one mode.
Notes:
Different discs differ in languages available.
2X
FR
4X
8X
16X
32X
DVD
CD
Mute
When playing a disc, this function removes the sound.
1. TO REMOVE SOUND
3. Press
(PLAY) to switch to normal play while in fast-
Press MUTE , the screen shows "MUTE".
forward or fast-reverse playing mode.
MUTE
MUTE
2. TO RESUME SOUND
Press MUTE again, the screen shows "MUTE OFF".
page32
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
DVD
Playing A Disc Repeatedly
Slow Play
Enjoy slow motion by the following the steps below.
DVD
You can repeat a title or chapter.
1. To repeat a chapter:
SLOW
Press REPEAT , the screen will show:
DVD
REPEAT
1. Press SLOW to play in slow motion.
SLOW
CHAPTER
2. To repeat a title:
Press REPEAT twice, the screen will show:
The screen shows the following in order:
REPEAT
1/2
1/4
1/8
1/4
1/16
1/2
TITLE
1/16
1/8
2. Press (PLAY) to resume play at normal speed.
3. To repeat all:
Press REPEAT third time, the screen shows
"
ALL".
DVD
CD
Repeat Play
4. To remove "REPEAT" function:
Press REPEAT until "
ALL" disappears.
This function can be used to repeatedly play a title,
chapter, track, disc, or certain parts on a disc.
CD
You may repeat a track or an entire disc according to
the following steps.
1. To repeat a track:
Press REPEAT , the screen shows "
The unit plays the current track.
TRACK".
REPEAT
A-B
page33
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
REPEAT
Select Subtitles
TRACK
DVD
This operation works only with discs with multiple subtitle
languages recorded.
2. To repeat a disc:
Press REPEAT , the screen shows "
The unit plays all the tracks on the disc.
ALL".
REPEAT
ALL
SUBTITLE
3. To remove "REPEAT" function:
Press REPEAT till "
ALL" disappears.
DVD
Repeat Some Parts
You can designate certain portions of disc to play
1. Press SUBTITLE repeatedly until the desired
language is selected.
repeatedly by pressing A-B when playing a disc.
The screen shows:
DVD OR CD
1. To set a starting point A: press A-B where you wish
to begin.
The screen shows:
SUBTITLE
A-B
SUBTITLE01/03:ENGLISH
A
2. To set an end point B: press A-B where you wish to
end.
2. Remove the subtitle.
The screen shows:
Press SUBTITLE until the screen shows "TURN
OFF SUBTITLE".
A-B
AB
Notes:
For some discs, subtitles cannot be removed.
Different discs differ in the language of subtitles.
If the subtitles of discs cannot be selected, the
The unit will then play from A to B.
3. To resume normal play, press A-B again until "
disappears.
AB"
screen shows "
" when you press SUBTITLE .
page34
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
DVD
CD
Angles Select
Time Search
DVD
Some discs have images with different viewing angles,
you may select among them. For example, when you
watch a running train, you may watch it from the front, the
left window or the right window without stopping it.
TIME SEARCH
Time Search
You may directly enter a time, title or chapter number to
ANGLE
quickly search the disc. The unit will play from that point.
DVD
Example:
1. Search a title or a chapter.
A DVD has four viewing angles at your option.
1. Press ANGLE to select ANGLE1.
Example: Search chapter 2 in title 6.
Press TIME SEARCH , the screen shows:
TITLE03/30 CHAPTER 01 /04
1/4
Press the direction button and move
the cursor to illuminate the title number.
The screen shows:
TITLE 03 /30 CHAPTER01/04
2. Press ANGLE to select other angles, the
screen shows respectively:
Press button 6 to select title 6 , the screen
shows:
2/4 (select ANGLE2)
3/4 (select ANGLE3)
4/4 (select ANGLE4)
TITLE 06 /30 CHAPTER01/04
Repeat the steps above, select chapter 2
in title 6.
3. To resume normal playback, press ANGLE to select
original angle.
page35
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
2. Time Search.
DVD
CD
Program Play
Press TIME SEARCH until the screen
shows:
P.MODE
TIME
:
:
To use the program playback feature, you must enter
the order in which you want the titles (and chapters) on
the DVD or the tracks on the CD to play by creating a
program.
Press number buttons to enter hour, minute
and second.
Example: Enter 1 , 0 , 2 , 3 , 8
After setting, the unit will play the disc from 1:02:38.
DVD
CD
1. Press P.MODE until the screen shows:
To jump to a specific time, use
TIME SEARCH to set the time for the desired location.
Example: Play from 00:01:38 of track 6.
1. Press button 6 to select track 6.
The screen shows:
PROGRAM: TT(20)/CH (
--)
01 TT:_ _ CH:_ _ 06 TT:_ _ CH:_ _
02 TT:_ _ CH:_ _ 07 TT:_ _ CH:_ _
03 TT:_ _ CH:_ _ 08 TT:_ _ CH:_ _
04 TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _
05 TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _
EXIT
NEXT
TRACK06/20
00:01
2. Use the number buttons on the remote to enter the title
(and chapter) you want to play first. The title (and
chapter) number you entered appears in the box. For
example: Enter Chapter 1 in Title 8, the screen shows:
2. Press TIME SEARCH , the screen shows:
TRACK GO TO
:
PROGRAM: TT(20)/CH (
--)
01 TT:0 8 CH:0 1 06 TT:_ _ CH:_ _
02 TT:_ _ CH:_ _ 07 TT:_ _ CH:_ _
03 TT:_ _ CH:_ _ 08 TT:_ _ CH:_ _
04 TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _
05 TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _
3. Press button 0 , 1 , 3 , 8 to enter the time. The screen
shows:
EXIT
START
NEXT
TRACK06/20
01:38
3. The cursor jumps to the next spot in the program list
section. Make sure the box is highlighted and enter
your next track.
4.Continue adding title (and chapter) until your program
is complete. You can play your program by highlighting
START and press PLAY .
The unit plays according to entered time and track, for
example from 00:01:38 of track 6.
Press 10/0 to enter 0.
Note: CD discs have three options in time search function:
You can enter the elasped time of a disc to play.
You can enter the elasped time of a track to play.
You can go to a track you want play by entering the
track number.(Similar to title and chapter search for
DVD.)
Note: If you want to program more than 10 titles (and
chapters), highlight NEXT and press PLAY to
go to the next page. Proceed to program 11-20 in
the same way titles 1-10 were programmed.
5. To remove program playback, press the STOP button
twice during the program play.
page36
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAY DISCS IN VARIOUS WAYS
CD
Shuffle (Random) Play
1. Press P.MODE until the screen shows:
DVD
CD
PROGRAM: TRACK (01-20)
The unit can play DVD chapters or audio tracks in
random order.
01 _ _
02 _ _
03 _ _
04 _ _
05 _ _
06 _ _
07 _ _
08 _ _
09 _ _
10 _ _
The order is different each time.
1. Press P.MODE to select shuffle or randomplay
mode when a disc is playing.
EXIT
NEXT
2. Use the number buttons on the remote to enter the
track number you want to play first. The track number
entered appears in the box. The example: To program
track 8 of a CD to play first, enter 8, and the screen
shows:
P.MODE
The screen shows:
PROGRAM: TRACK (01-20)
01 08
02 _ _
03 _ _
04 _ _
05 _ _
06 _ _
07 _ _
08 _ _
09 _ _
10 _ _
SHUFFLE
OR
RANDOM
EXIT
START
NEXT
2. Press (PLAY) to start shuffle or random play.
The unit selects a track to play.
3. The cursor jumps to the next spot in the program list
section. Make sure the box is highlighted and enter
your next track.
3. Remove shuffle or random play.
When playing a DVD disc, press
When playing a CD disc, press
twice.
twice.
4. Continue adding tracks until your program is
complete. You can play your program by highlighting
START and press PLAY .
Note: If you want to program more than 10 tracks,
highlight NEXT and press PLAY to go to next
page. Program 11-20 in the same way 1-10 were
programmed.
5. To remove program playback, press the STOP button
during the program play.
page37
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
According to the recorded information and external
equipment, set the following functions for the player to
obtain the best playing status.
The screen shows:
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
SETUP
Main Page
Go To Speaker Setup Page
1.Press SETUP to set options in the main menu.
SETUP
Press direction buttons ( or ) to highlight "Dolby
Digital Setup", and press (PLAY) to enter "Dolby
Digital Setup" Page. The screen shows the submenu
for your selection.
The screen shows:
The main menu appears on the screen, with icons across
the top of the screen, illustrating General Setup, Audio
Setup, Video Setup,Preference, Password Setup, and
Exit Setup.
--Dolby Digital Setup--
Dual Mono STR
Stereo
The screen shows:
Left Mono
Right Mono
Mixed Mono
D.R.C
--Setup Menu--Main page --
General Setup
Audio Setup
Audio Setup
Press direction buttons
,
to select "Left Mono".
Video Setup
The screen shows:
Preferences
Password Setup
Exit Setup
Go To General Setup Page
--Dolby Digital Setup--
Dual Mono STR
Stereo
2. Press direction buttons ( or ) to select and press
(PLAY) to confirm.
Left Mono
Right Mono
Mixed Mono
Example: Select "Audio Setup" and do some setup.
Press direction button to highlight "Audio Setup",
press (PLAY) to enter "Audio Setup Page".
D.R.C
Audio Setup
page38
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
Press
(PLAY) to confirm your selection. Set "Dual
General Setup
The setting structure is :
Mono" in "Dolby Digital Setup" to "Left Mono".
The sereen shows:
-- General Setup Page --
TV Display
PS
Normal/PS
Normal/LB
Wide
--Dolby Digital Setup--
Dual Mono
L
Stereo
Left Mono
Right Mono
Mixed Mono
TV Type
NTSC
PAL
Multi
NTSC
YUV
TV Output
SVideo
D.R.C
SVideo
Audio Setup
SPDIF Output RAW
Off
SPDIF/RAW
SPDIF/PCM
Captions
On
On
Off
On
Off
3. Exit setup menu.
Press the direction button to exit from "Dual
Mono".
Press the direction button to exit from "Dolby
Digital Setup".
Screen Save On
Main Page
Press the direction button to highlight "Main Page"
and press (PLAY). The screen shows:
TV DISPLAY
1. NORMAL/PS
This is selected when the unit is connected
to a normal TV.
Setup Page -- Main Page
General Setup
Audio Setup
Wide-screen images are shown on the
screen, but with some parts cut
automatically.
Video Setup
Preferences
Password Setup
Exit Setup
Go To Audio setup Page
Press the direction button to highlight "Exit Setup"
and press (PLAY) to exit setup menu completely.
NOTE:You can also keep pressing the direction button
until the cursor is moved to the last icon illustrating
Exit, then press the (PLAY) button to exit setup
menu completely.
page39
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
2. NORMAL/LB
SPDIF OUTPUT
This is selected when the unit is connected
to a normal TV. Wide-screen images are
shown on the screen with black bars on the
top and bottom of the screen.
SPDIF OFF: No signal output is from digital port.
SPDIF/RAW: Select this when the DVD player is
connected with a digital amplifier through digital port.
When a Dolby Digital disc or MPEG disc are played, the
digital output will be optional. The power amplifier to be
connected must have Dolby Digital and MPEG
decoding.
SPDIF/PCM: Select this when the DVD player is
connected with a 2-channel digital stereo amplifier. When
a Dolby Digital or MPEG disc is played, the digital port will
output in PCM 2-channel format.
3. WIDE
This is selected when the unit is connected to a
wide-screen TV.
CAPTIONS
ON
Subtitles are shown.
OFF
Subtitles are hidden.
SCREEN SAVER
The screen saver image appears when the unit stops or
the image is frozen for a few minutes. The screen saver
prevents damage to the TV screen.
ON: Start the screen saver.
TV TYPE
You may select according to the color system of the TV to
be connected.
Select "MULTI"for a multi-system TV.
Select "NTSC"for a NTSC TV.
Select "PAL" for a PAL TV.
OFF: Remove the screen saver.
TV OUTPUT
1. YUV
Audio Setup
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback. In some TVs or
monitors, the color levels of the playback picture may
be reduced slightly or the tint may change. If this
happens, adjust the TV or monitor for optimum
performance.
The setting structure is:
- - Audio Setup Page - -
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
2. S-VIDEO
Main Page
When you select this, you should connect with S-
VIDEO.
page40
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
SPEAKER SETUP
EQUALIZER
This will help you to select graphic equalizer patterns
according to the genre of the music being played,and
adjust the equalizer.
The setting structure is:
The setting structure is:
- - Speaker Setup Page - -
Downmix
STR
Lt/Rt
Stereo
Audio Setup
- - Channel Equalizer - -
Lt/Rt
EQ Type
None
None
Rock
Pop
A disc recorded multi channel soundtrack, the output
signal will be incorported to left and right channel.
STEREO
Live
A disc recorded multi channel soundtrack, the output
signal will be incorported to stereo.
Dance
Techno
Classic
Soft
DOLBY DIGITAL SETUP
Audio Setup
The setting structure is:
- - Dolby Digital Setup - -
EQ TYPE
Dual Mono
STR
Stereo
You can select music category by pressing the direction
buttons and confirm by pressing the PLAY button.
Left Mono
Right Mono
Mixed Mono
FULL
3/4
D.R.C
2/4
1/4
Audio Setup
OFF
DUAL MONO
This is the output mode of the L and R signals of the
set audio output. If it is set to "MIXED MONO", the
function only works when the DVD being played is 5.1-
channel.
D.R.C
This is selected to adjust linear compression rate to
obtain the different compression results of the signals.
page41
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
MEDIUM
3D PROCESSING
The sharpness level is medium.
LOW
The setting structure is:
The sharpness level is lowest.
- - 3D Processing Page - -
BRIGHTNESS
V SURR
Off
On
Off
You can use the or button to adjust the brightness.
CONTRAST
Reverb Mode Off
Off
Concert
You can use the or button to adjust the contrast.
Living Room
Hall
Bathroom
Cave
Password Setup
The setting structure is :
Arena
Church
Audio Setup
- - Password Setup Page - -
V SURR
PW Mode
Off
On
Off
Use to turn the above function off.
REVERB MODE
Password
Main Page
Change
Use to select a Reverb Mode which you want.
PASSWORD MODE
ON: The password function is on and "PARENTAL"
is dim and cannot be selected.
Video Setup
The setting structure is:
OFF: The password is locked, "PARENTAL" can
be selected.
- - Video Setup Page - -
PASSWORD CHANGE
Sharpness
High
High
Select this to adapt the code, the screen shows:
Medium
Low
Brightness
Contrast
Main Page
00
00
Old Password
New Password
Confirm PWD
OK
SHARPNESS
Enter a password according to the screen.
Note: The password is automatically factory set to
99999.
Use to select the sharpness level.
HIGH
The sharpness level is highest.
page42
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU SETTING
MP3 OPERATIONS
SELECT TRACKS WITH
NUMBER BUTTONS
Preferences
The setting structure is :
1. Insert a disc, the unit will search disc information.
The TV screen displays main menu.
- - Preference Page - -
Audio
ENG
English
French
00:00
00:00
Spanish
Chinese
Japanese
001/012 FOLDER
\
Subtitle ENG English
CD01
CD02
CD03
CD04
CD05
CD06
French
Spanish
Chinese
Japanese
Off
Disc Menu
Parental
ENG
English
French
Spanish
Chinese
Japanese
2.Press direction key to select song folder.
Press (PLAY) to confirm selection. Example:
Select MP3-02, the TV screen displays.
08
1 G
2
00:00
00:00
3 PG
001/016 FOLDER
4 PG 13
5 PGR
6 R
\CD02\
..
7 NC17
8 ADULT
wave-11
wave-12
wave-13
wave-14
wave-15
Default
Reset
Main Page
3. Press direction buttons to select a song. Press
(PLAY) button to start playback.
4. Press or button to select other tracks in stop
mode.
5. In stop mode, select the folder icon (UP DIR 1) on
the left side, then press (PLAY) button to return to
the main menu.
LANGUAGE SELECTION
If a language mentioned above is recorded on the disc,
you can select sound, subtitles or disc menu languages. If
not, the language recorded on the disc is shown.
PARENTAL LOCK
When playing a disc with parental lock function, you may
select an age control grade according to the rating your
desire.
6. Press
or
to play previous or next songs.
Example: If "PG" is selected, you cannot play DVD video
discs rated higher than the PG grade.
DEFAULT >> RESET
Each function setting returns to the initial status in the
factory if you select this option.
OTHER FUNCTIONS
During playback of MP3 discs, the unit features mute,
volume control, and repeat play. Operations are the
same as CD.
Note:
"PREFERENCES" can only be selected when password
is OFF when the unit is in stop mode.
page43
Download from Www.Somanuals.com. All Manuals Search And Download.
KODAK PICTURE CD PLAYBACK
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture
CD simply by checking the box on the photofinishing envelope when you drop off a roll of film
(35 mm or Advanced Photo System (APS) color print film) at the time of processing in photo
processing outlet displaying "Kodak Picture CD"sign. When your order is returned, you receive
your prints, negatives, and your full roll of pictures safely stored on your KODAK Picture CD.
Each KODAK Picture CD brings you the tools to enhance, share and manage your pictures on
your computer.
Now, you can playback Kodak Picture CDs on XXX DVD players and view your pictures on
your TV in the comfort of your living room.
Playing back your Kodak Picture CD
The new feature enables the decoding of JPEG files from a Kodak Picture CD disk.
Playback modes
Normal
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in
the Kodak Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in
the TV screen. Twelve slideshow transition modes are provided, use "PLAY MODE" key to select.Select
transition mode prior to start of slideshow if one mode is desired for the entire show.
Mode 8: wipe from right bottom to left top
Mode 9: wipe from center to top/bottom
Mode 10: wipe from center to left/right
Mode 11: wipe from top/bottom to center
Mode 12: wipe from left/right to center
Mode 13: horizontal blinds
Mode 14: vertical blind
Mode 15: wipe from edge to center
Mode 16: random
Mode 0: no special transition effect (by default)
Mode 1: wipe from top to bottom
Mode 2: wipe from bottom to top
Mode 3: wipe from left to right
Mode 4: wipe from right to left
Mode 5: wipe from left top to right bottom
Mode 6: wipe from right top to left bottom
Mode 7: wipe from left bottom to right top
Customer can set transition effects for each picture in a slideshow by using the "PLAY MODE" functions
while viewing a slideshow.The last transition mode selected will be used in any future slideshows.
To display an image indefinitely, press the PAUSE key. To view the Next or Previous picture press
NEXT or PREVIOUS keys. To resume the slideshow press the PLAY key.
Image Rotation
There are four modes to rotate a picture:"Invert", "Mirror", "Left", and "Right". These operations are
allowed only when a picture is being displayed normally and will be cancelled automatically when a new
picture is displayed.The arrow key is used to select the diferent rotation modes:
Up
-Invert/Normal
-Mirror/Normal
-Turn left
Down
Left
Right
-Turn right
Digest
The "MENU" or "STOP" key is used to display thumbnail size pictures. After it is enabled, up to 12
scaled-down thumbnail pictures will be displayed on the screen. The "NEXT" and "PREV" keys can be
used to display the next/prev nine pictures in the the Kodak Picture CD.
You can select any of the nine displayed thumbnails by using the Arrow Keys and pressing the "PLAY"
key. The thumbnail will be enlarged to fit the TV screen and the slide show will statr. If you desire to
display an image indefinitely, press the PAUSE key. To view the Next or Previous picture press NEXT or
PREVIOUS keys. To resume the slideshow press the PLAY key.
IMPORTANT NOTE:
Quality of pictures displayed on the screen is highly dependent on the viewing device.
page44
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If you experience the following problems while using the unit, this troubleshooting guide can help you.
No sound
Disc cannot be played
Check if the unit is connected securely.
Make sure the TV or amplifier is working properly.
Make sure the amplifier is set to receive DVD signal
output.
There is no disc in the unit.
Put the disc on the disc tray properly with the label
side up.
Clean the disc.
Moisture has condensed in the unit. Remove the
disc and leave the unit on for about an hour.
No image
Check if the unit is connected securely.
Make sure the TV is working properly.
Make sure the color system is set correctly.
The unit doesn't operate normally
Disconnect the power plug and insert it into the wall
outlet again.
Bad sound quality
Make sure the audio output mode is set correctly.
Make sure the audio connection between the unit and
amplifier is in place.
Remote control does not work
Remove barriers between the remote control and the
unit.
Point the remote control at the remote control sensor
of the unit.
Replace the batteries with new ones.
page45
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Wavelength 650nm
NTSC/MULTI/PAL
20Hz ~ 20KHz 2.5dB
85dB
Laser
Video system
Frequency response
Signal/noise ratio
Audio distortion + noise
Channel separation
Dynamic range
- 80dB (1KHz)
85dB ( 1KHz)
85dB ( 1KHz)
output level:
2V 10%
Audio out
(analog audio)
Load impedance: 10K Ω
output level:
0.5Vp-p 20%
Audio out
(digital audio)
Load impedance: 75 Ω
output level:
1Vp-p 20%
Video out
Load impedance: 75 Ω, imbalance, negative polarity
output level: brightness (Y) 1Vp - p 20%
chromaticity (C) 0.286Vp-p 20% Load impedance: 75 Ω
Output
S-video out
YUV out
Y:700mv 20% Cb/Pb:535.5mv 20% Cr/Pr:535mv 20%
Power supply
Power Consumption
DC12V, AC100~240V , 50/60Hz
20W
This manual is only for your reference, any change to the design and specifications will not be advised.
page46
Download from Www.Somanuals.com. All Manuals Search And Download.
|