Indesit Washer WDG1195WG User Manual

User Instruction Book  
for  
INDESIT  
WASHING MACHINES  
Models  
WDG1195WG  
WDG1195WG/1  
C00045391 / 1950087463  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
H
G
F
A
D
E
C
B
A. Programme selector  
E. ON-OFF button  
Use this dial to select one of the 18 wash programmes  
available for all your laundry requirements (see programme  
table on page 6).  
This button turns your appliance ON/OFF. Press button E to  
turn on the washer-dryer and depress button E to turn off  
the washer-dryer.  
Remember that this dial should be turned in a clockwise  
direction and only when the machine is off.  
F. Ecosense button  
Use this button with programmes for washing linen and  
cotton. You washer-dryer will automatically adjust the water  
and electric energy consumption according to your laundry  
load. Although this function only operates on the heavy and  
delicate cycles (not the wool cycle), it is not recommended  
to use this function for the delicate cycle.  
B. Dry programme selector  
This knob allows you to select the most appropriate drying  
cycle for the type of fabric. Two separate cycles are available:  
up to 120 min. for fast fabrics (right sector)  
up to 80 min. for synthetic fabrics (left sector)  
G. Anti-crease button  
The cycle for fast fabrics has a cooling period at the end of  
the cycle itself.  
This function interrupts the cycle so that the laundry is left  
soaking in water before the spin cycle.  
This function is extremely useful because it stops delicate or  
synthetic fabrics from creasing (for example when one has  
to wait several hours before removing the laundry load).  
It should be used only with the programmes for synthetic  
fabrics and woollens.  
IMPORTANT: Before opening the door, drain away the water  
by setting knob A on "drain". To carry out the spin cycle,  
simply press G.  
C. Temperature selector  
Use this dial to set the wash temperature shown in the  
programme table (page 6). You may reduce the  
recommended wash temperature of the programme you  
have selected or run a cold wash (symbol ).  
Note: When using cycle number 2, do not use tempe-  
rature settings below 60°C.  
H. ON/OFF Indicator light  
D. Detergent  
dispenser  
When this is lit, the machine is on.  
The detergent dispenser has  
three compartments marked  
1, 2 and 3:  
3
2
1
1
2
3
prewash detergent  
wash detergent  
fabric softener.  
GB  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using your w asher  
Never fill compartment 3 above the grid.  
Preparing your laundry....  
Use compartment 2 for liquid detergent, filling the  
compartment just before you start the washer. Remember  
that liquid detergent is ideal for wash cycles with  
temperatures up to 60°C and for the programmes with no  
prewash cycle. Dispensers for liquid and powder detergents  
which are placed inside the drum of the washer, are sold on  
the market.  
Divide your laundry by fabric and colour fastness. Wash white  
and coloured items separately.  
Remember to empty pockets, removing especially those small  
items like coins, paper, pins and badges that might jam the  
pump. Fasten or remove loose buttons and fasten zippers.  
Turn shirts inside out for better results.  
To improve the effectiveness of the washing cycle, we  
recommend that you insert a detergent dispenser in the drum  
before loading the laundry.  
Check w ash labels  
Garments and laundry generally have wash instruction labels  
(which tell you if they shloud be dry-cleaned, hand washed  
or machine washed) showing the wash temperature, how  
to iron etc.  
Do not use hand washing detergents since these produce  
very heavy suds.  
When using cold wash cycles, remember to reduce the  
detergent dosage.  
Important: fabrics should only be machine washed if their  
labels show the appropriate symbol (see table 1 page 4).  
Alternate small and large items w hen  
loading your w asher-dryer  
This washer-dryer has an electronic load balancing control:  
before carrying out the spin cycle, this device ensures that  
the laundry is arranged as evenly as possible in the drum,  
according to the type of fabric and the way it was initially  
loaded. This will minimize vibration and noise even during  
the fastest spin cycle. For best results however, we  
recommend you alternate small and large items when you  
load your washer-dryer remember to spread them out; never  
wash large loads of terry cloth items.  
Detergents and fabric softener  
Open detergent dispenser D by pulling it outwards. Fill with  
detergent and conditioner using the quantities indicated by  
the manufacturer on the packet according to the load you  
are washing, the water hardness and how soiled your laundry  
is. As you become more familiar with your washer, you will  
regulate the quantities according to your own personal  
experience.  
Compartment 1  
Prewash cycle detergent  
(powder)  
Compartment 2  
Wash cycle detergent  
3
(powder or liquid)  
Compartment 3  
Fabric softner  
2
1
GB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Understanding the labels  
Strong  
action  
Not  
Wash  
Wash at 95°C Wash at 60°C Wash at 40°C Wash at 30°C Hand wash  
washable in  
water  
Delicate  
action  
c
l
Bleaching  
Ironing  
Bleaching only Do not bleach  
in cold water  
Hot iron at  
max 200°C  
Medium hot  
ironing at  
Iron at max  
100°C  
Not ironable  
max 150°C  
A
F
P
Dry clean with Dry clean only  
Dry clean with Do not dry clean  
av. benzine,  
any solvent  
with,  
Dry  
cleaning  
perchloride,  
benzine av.,  
pure alcohol,  
R111 and R113  
pure alcohol  
and R113  
High  
Temperat.  
Machine  
dryable  
Do not  
machine dry  
Spread to dry Hang to dry  
without spin  
Dry on clothes  
hanger  
Drying  
drying  
Low  
Temperat.  
Starting up your w asher-dryer  
Run the first w ash w ithout laundry using programme  
2 at 90°C.  
prevent the formation of an unpleasant odour) and shut off  
the water supply.  
Load your laundry in the washer-dryer, add the detergent  
and fabric softener (see pages 3) and remember to:  
- shut the door properly  
- plug the washer-dryer in at the mains  
- turn on the water supply  
Drying only  
The glass part of the door becomes hot during the drying cycle and  
reaches very high temperatures. Avoid touching the glass or coming  
into contact w ith it.  
- the knob B is on STOP  
- check that button E is not pressed in (position O)  
Maximum drying loads  
heavy fabrics maximum 2.5 Kg  
mixed fabrics maximum 2 Kg  
synthetics maximum 1.5 Kg  
Selecting the programme  
The table on pages 6 will help you choose the right programme.  
Turn dial A to the programme number you have chosen. Set  
the temperature on dial C and, if necessary, press function  
button (F, G); set ON/OFF button E to position I (ON).  
Load the laundry you wish to dry (max. 2.5 Kg) and check:  
- that the door is firmly shut  
- the plug is in the socket  
- the water tap is open  
At the end of the w ash cycle...  
- the button E is not pressed (position O)  
To turn off the washer-dryer press the ON-OFF button E and  
wait approximately 3 minutes before opening the door. Once  
you have removed your clean laundry from the washer-dryer,  
remember to leave the door open or at least ajar (this will  
GB  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the laundry load you want to wash and dry is above the  
maximum (table 2 on pag. 5), follow the steps described in  
the paragraph w ashing only.  
At the end of the wash cycle, remove the laundry, divide the  
laundry and return a part of the load in the appliance.  
Now follow the steps described in the paragraph drying  
only.  
Repeat the same steps for the remaining part of the laundry  
load.  
Important: woollens may not be machine dried since the  
drying temperature would damage them.  
Never dry items that have been laundered with inflammable  
solvents (es. trichloroethylene).  
Do not dry items containing foam rubber or similar  
elastomers.  
Check that the water tap to which the supply pipe of the  
appliance is connected, is open during the drying cycle.  
This appliance must be used only for laundry washed in water.  
Now select the programme  
Turn knob A to one of the two settings , select the drying  
time required with knob B (table 2 on page 5) and then  
press on/off button E (postion I).  
At the end of the drying cycle...  
Turn off the tumble dryer by pressing on/off button E and  
wait at least 3 minutes before opening the door. Remove  
the laundry and leave the door ajar to prevent the formation  
of bad odour; remember to turn off the water tap.  
This appliance has two drying programmes to ensure best  
drying results and to prevent damage to your laundry: the  
first is for heavy fabrics (right hand section) from 0 to 120  
min. and the second is for synthetic fabrics (left hand  
section) from 0 to 80 min. Forsmaller loads than those shown  
in the table, remember to reduce the drying time  
proportionally. Until you become familir with your appliance,  
we suggest you programme shorter drying times than those  
indicated and to check that your laundry is quite dry at the  
end of the cycle. If not, simply shut the door and set extra  
drying time. This will allow you to acquire your own perso-  
nal experience on drying times and will avoid over-dry laundry  
which is difficult to iron.  
2.  
Fabric Load  
Max.  
Load  
(Kg)  
Drying  
knob  
sector  
Drying time  
(Minutes)  
Humid Dry  
Cotton, Laundry of  
linen  
different  
sizes  
2,5  
Right  
100  
110  
Cotton Only terry  
towels  
2,3  
1,5  
1
Right  
Left  
100  
110  
70  
Terital, Sheet and/or  
-
-
cotton  
shirts  
Acrylics Pyjamas,  
socks, etc.  
Left  
60  
Nylon  
Petticoats,  
stockings,  
etc.  
1
Left  
-
40  
Washing and drying  
The glass part of the door becomes hot during the drying cycle and  
reaches very high temperatures. Avoid touching the glass or coming  
into contact w ith it.  
If you want to wash and dry a laundry load that is not above  
the maximum load shown (table 2 on page 5), you should  
follow the steps in the paragraph w ashing only but  
remember to set the drying time as well with knob B before  
pressing on/off button E (position I). In this way the appliance  
passes automatically from the washing cycle to the drying  
cycle.  
GB  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the programmes  
The description of the w ash programme by type of fabric is show n on the detergent dispenser.  
Fabrics and degree of dirtiness  
COTTONS  
Program. Temperat. Prewash Wash  
Softner Description of wash cycle  
knob  
knob  
detergent detergent  
Heavily soiled white laundry (sheet,  
table cloths. etc.)  
Warm prewash, wash at 90°C, rinse  
cycles, softener, spin cycle  
1
2
MAX  
MAX  
Very soiled white fabrics and fast  
colours (coloured laundry, dressing  
gowns, vests, etc.)  
Wash at 90°C, rinse cycles, softener,  
spin cycle  
Lightly soiled white fabrics and  
resistent colours (coloured laundry,  
shirts etc.)  
Wash at 60°C, rinse cycles, softener,  
spin cycle  
3
60°C  
40°C  
Non fast colours (shirts, vests,  
dresses, etc.)  
Wash at 40°C, rinse cycles, softener,  
spin cycle  
4
5
6
7
Rinse cycles  
Rinse cycles, softener, spin cycles  
Rinse cycles, softener, spin cycles  
Strong spin  
Softner  
Spin  
Drying cycle for natural fibres  
SYNTHETICS  
Colour fast synthetics  
Wash at 60°C, rinse cycles, softener,  
non crease or delicate spin  
8
60°C  
50°C  
40°C  
Normally soiled colour fast  
synthetics (bouses, skirts, etc.)  
Wash at 50°C, rinse cycles, softener,  
non crease or delicate spin  
9
Non fast coloured synthetics  
(all kinds of slightly soiled laundry)  
Wash at 40°C, rinse cycles, softener,  
non crease or delicate spin  
10  
11  
12  
13  
Rinse cycles  
Rinse cycles, softener, non crease,  
spin cycles  
Softner  
Rinse cycles, softener, non crease,  
spin cycles  
Spin  
Delicate spin cycle  
Drying cycle for synthetic fibres  
DELICATE FABRICS  
Woollens (machine washable)  
Wash at 40°C, rinse cycles, softener,  
non crease or delicate spin  
14  
15  
16  
17  
18  
40°C  
Rinse cycles  
Softner  
Spin  
Rinse cycles, softener, non crease,  
spin cycles  
Rinse cycles, softener, non crease,  
spin cycles  
Delicate spin  
Drain  
Drain with no spin  
GB  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Washing tips  
Stain removal  
What not to w ash in your appliance?  
The most common stains will disappear during the wash. If  
they are particularly stubborn, soak the garment in water  
and rub a little detergent onto the stain before putting it in  
the washer-dryer.  
Greasy marks (especially old ones) need treating with a stain-  
remover. Be careful not to mark the fabric with remover.  
- Torn, frayed or unhemmed items; in order to wash items  
of this kind, wrap them in a linen bag to prevent them from  
tearing during the wash.  
- Dark coloured items with white items. Dark items should  
be washed separately.  
Curtains  
Pre-treatment for aw kw ard stains  
Curtains tend to crease badly. Try this washing hint to prevent  
creases: fold the curtains carefully and place in a pillow case  
or loose mesh bag; wash separately ensuring that the weight  
is no more than a half wash load.  
- Ink: ball point/felt tip; Put a few drops of nail varnish remover  
or surgical spirit onto a piece of cotton wool and dab the  
stain. Wash at 90°C (NB. This is only suitable for colourfast  
cottons)  
- Tar and oil; Scrape off any thick tar or oil on the surface.  
Soften the remainder with margarine or butter and wipe  
away with a clean cloth. Treat any residual stain with  
turpentine, then wash according to the fabric  
- Wax; Scrape off, then put the stained garment between  
two pieces of blotting paper and press with a hot iron. Dab  
the stain immediately with cotton wool dipped in turpentine  
- Chewing gum; Apply nail varnish remover to the gum,  
then remove it carefully  
Quilts, tennis shoes and w ind-cheaters  
Contrary to common belief, goose or duck down quilts and  
wind-cheaters, can in fact be machine washed, provided  
the instructions shown on the label are followed carefully.  
Remember however to load no more than 2-3 kg of laundry  
and to repeat the rinse cycle once or twice following with a  
gentle spin. In the case of tennis shoes, wipe off mud and  
then machine wash with denims or heavy fabrics (but not  
white fabrics).  
- Lipstick; Pretreat with a liquid detergent using the dosing  
ball, rub vigorously and rinse before washing  
- Grass; Soak in a warm washing solution using a biological  
washing product, then wash according to the fabric.  
Alternatively, saturate the stain with white methylated spirit.  
Rinse and wash normally  
- Paint: Water based latex, acrylic and school paints, emulsion  
paints; Treat stains while still wet. Rinse thoroughly under  
running water to flush out the paint, then wash according  
to the fabric.  
Oil based paint/varnish; Sponge with white spirit or paint  
brush cleaner before washing in the normal way.  
Do not exceed the recommended weights  
shown in the table  
For best washing results, do not exceed the recommended  
weights shown in the table; the weights shown refer to dry  
laundry.  
Ma xim u m d ry la u n d ry  
load  
Ho w h e a vy is yo u r  
laundry?  
heavy fabrics  
1 sheet 400-500 g  
maximum 5 kg  
delicate fabrics  
maximum 2 kg  
pure new wool  
maximum 1 kg  
mixed loads  
1 pillow case 150-200 g  
1 table cloth 400-500 g  
1 bathrobe 900-1200 g  
1 bathroom towel150-250 g  
maximum 2,5 kg  
GB  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Energy saving hints  
- Try to wash complete laundry loads: this saves unnecessary  
consumption of water and energy.  
- Your washer-dryer features automatic consumption control,  
this means that you can wash laundry loads from 1 - 5 kg  
with considerable savings. Your washer-dryer will use just  
the right amount of water and electricity. All you need to do  
is dose the detergent.  
- Fabric softeners: always use a softener; not only do these  
perfume and soften your laundry, they also make it easy to  
iron, saving you time.  
- Select the right programme for your laundry: this will  
obviously depend on the type of fabric and how soiled your  
laundry is; we recommend the use of programmes without  
prewash which will save you time, water and energy. The  
prewash cycle should in fact be used only for heavily soiled,  
cotton fabrics.  
- Set the right temperature: use temperatures above 60°C  
only for very stubborn dirt but remember that modern  
detergents are very efficient even at low temperatures.  
- Use the correct quantities of detergent: do not use too  
much detergent; remember that not only will this make  
rinsing more difficult but also pollutes the enviroment.  
- Use the economy buttons: when washing small laundry  
loads use the Economy button if available on your washer-  
dryer and reduce the detergent quantity.  
General maintenance  
After every w ash  
When moving house  
When you move, all you need to do is secure the inside of  
the machine with the transit screws (supplied with the  
packaging of the machine) so that it will not be damaged.  
Leave the door open and wipe the door gasket dry after  
each wash so that damp or odours do not form.  
Remove the plug  
Cleaning and special servicing  
Before cleaning or servicing always remove the plug from  
the socket. This is for safety reasons.  
Hose  
No solvents or abrasive substance  
Check the hose once a year. It should be replaced if any  
signs of splitting or damage can be seen. The machine is  
under a lot of strain while operating and this may cause a  
cracked hose to split open suddenly.  
You do not need solvents or abrasive substances to clean  
the outside of the washer-dryer and the rubber parts. Just  
use a cloth, warm water and soap.  
Inspecting the drain pump  
Detergent dispenser  
draw er  
Your washer-dryer has a self-cleaning pump and therefore  
requires no cleaning or mainteannce. Remember however  
that small items such as buttons or coins may accidentally  
fall into the pump. To remove these items, the pump comes  
equipped with an "prechamber" which is accessible from  
the front of the pump. To gain access to this prechamber  
simply remove the panel located on the bottom part of the  
washer-dryer (figure 1), place it on the ground near the  
machine (figure 2), use a screwdriver to loosen screw Z and  
remove the lid by turning it in the counter clockwise direction.  
Carefully inspect the inside of the pump.  
Important: before removing the lid check that the wash cycle  
has ended and unplug the washer-dryer from the mains. It is  
normal for a small quantity of water to spill out once the lid  
is removed. The panel positioned at the base of the machine  
will catch the water that spills out. Remember to shut the lid  
firmly when you replace it.  
This can be removed and  
cleaned. Just pull it towards  
you, as shown in the diagram,  
and leave it under running  
water for a few minutes.  
Unplug the machine w hen you go aw ay  
Its best to unplug the machine when you go away, turn off  
the water supply and leave the machine door open or ajar.  
The drum and rubber door lining will dry and no unpleasant  
odours will form inside.  
GB  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Z
Removing limescale  
Water contains increasing amounts of limescale because of  
pollution. If you live in a hard water area in addition to  
using water-softener in each wash, it is a good idea to put  
the machine through a cycle without laundry or detergent,  
just using limescale remover.  
1
1
2
Fig. 1  
Fig. 2  
Trouble shooting  
If the machine does not seem to be working properly before  
calling the service engineer there are a number of things  
you can check. Perhaps you have forgotten to push in a  
button or you are not using the machine properly.  
The w asher-dryer is not drying  
Make sure:  
the plug is inserted properly into the socket; there is electricity  
in the house; the washer-dryer door is closed; the ON-OFF  
button E is on the I setting; the programming cycle knob, in  
washer-dryers which have one, is on the O setting; the  
program knob A is on the setting; the dryer knob B is on  
the O setting.  
Machine w on't start  
Make sure:  
the appliance is plugged to the mains socket; you have  
electricity in your home, the door is firmly shut, the ON/OFF  
button E is on I, the programming cycle knob, in washer-  
dryers which have one, is on O, the programme is properly  
set and the mains water tap is open.  
Lots of vibration during the spin  
Make sure:  
the internal oscillating unit was released correctly at the time  
of installation (see installation instructions); the washer is  
levelled correctly or too tightly fitted between furniture units  
and the wall.  
Machine w on't fill  
Make sure:  
the water tap is open and connected correctly to the hose;  
the water mains has not been cut off and that water pressure  
is sufficient; also check the hose for kinks.  
Your w asher is leaking.  
Make sure:  
the ring nut of the supply pipe is firmly tightened; the  
detergent dispenser is not plugged and the drainage pipe is  
firmly fixed.  
Water is pumping in and out all the time  
Make sure:  
there are no kinks in the drain pipe and that it is at least at a  
height of 60-100 cm; the pipe mouth is not below water  
level and that the wall drain has no air outlet. If the problems  
continue even after you have checked these points, shut  
the water tap and turn off your washer-dryer.  
Excessive formation of suds.  
Make sure:  
the type of detergent you have used - is it suitable for an  
automati washer - have you used too much detergent?  
Problems w ith pumping out w ater or  
spinning  
The w asher-dryer is not drying efficiently.  
Make sure:  
Make sure:  
the programme selected has a draining cycle; the non  
creasing "hydropstop" button, on washer-dryers which have  
one, has not been pressed accidentally; the drainage pump  
is not jammed; the drain pipe is bent; the drainage piping is  
plugged; any drainage pipe extensions are properly  
connected and do not prevent water flow.  
the end of the drain hose is not immersed in water; the  
drain pump is not blocked (see "General maintenance");  
the advice on maximum loads and drying times have been  
followed; the drying time selected is at least 20 minutes; the  
water tap is turned on.  
GB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
If despite all this your washer-dryer is still not running properly,  
call your local Authorized Service Centre providing the  
following information:  
-
-
fault  
model code (Mod. ....)  
and serial number (S/N ....)  
shown on the data plate at the back of your washer.  
Never use the services of an unauthorised servicing technician  
and insist on the use of original spare parts.  
Installation  
hose having the w hite end fittings should be connected be-  
tween the cold supply and the threaded connection adjacent  
to the letter C on the rear of the machine (see fig. 5). Remem-  
ber to insert a sealing washer at each connection to ensure  
watertight joints. Do not overtighten the connections by  
using tools -hand tight is sufficient to prevent leaks. It is gener-  
ally more convenient to have these supplies away from the  
sink taps. Where no suitable hot water supply is available or it  
does not meet these requirements, both inlet hoses may be  
connected to a cold supply by using two taps etc., or a «T»  
junction on the plumbing (see fig. 6) however, use of cold  
water only will increase programme times.  
Transit packing  
After removing the packing, check the appliance for damage.  
If you have any doubts do not use the washer and call a qualified  
technician. Keep the packaging components (plastic bags,  
polyester foam, nails etc.) out of the reach of children since  
they could be dangerous. The interior of the washer-dryer, has  
an oscillating unit which is fixed on the back by 3 screws  
during transport (figure 3). Before starting up the washer-dryer,  
release the unit, by unscrewing the 3 screws. Seal the screw  
holes with the plastic plugs supplied with the appliance.  
Note: the maximum temperature should not exceed 70°C  
(158°F).  
Fig. 3  
Fig. 4  
Levelling  
Fig. 6  
Fig. 5  
The washer-dryer must be perfectly levelled. To level the  
appliance, only the front feet need to be adjusted  
(see fig. 4); remember that the inclination of the working  
surface must not be more than 2 degrees. If the washer-dryer  
is installed on a carpeted floor, check that there is sufficient  
ventilation space between the floor and the bottom of the  
washer-dryer.  
Drain hose  
The drain hose (hooked pipe) is secured to the rear of the  
machine by support clips and may be routed to right or left as  
required (see fig. 7). The drain hose should be placed in a  
stand pipe with a minimum internal diameter of 38 mm (1½  
inches) or it can be positioned over a sink (see fig. 8) or it can  
be connected as shown in fig. 9. The height of stand pipe or  
sink should be between 60 and 100 cm (24 and 40 inches).  
Care must be taken that the hose is not obstructed, twisted,  
submerged or kinked. If the hose is connected with an airtight  
joining, provision should be made to prevent syphoning.  
Water supply  
Both hot and cold water supplies are preferable and they should  
be between 34.5kN/m²(5lb/in²) and 1034.2kN/m² (150lb/in²)  
pressure. The hose having the red end fitting should be en-  
countered between the hot supply and the threaded connec-  
tion adjacent to the letter H on the rear of the machine. The  
GB  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disposing of the plug:  
Ensure that before disposing of the plug itself, you make  
the pins unusable so that it cannot be accidentally inserted  
into a socket.  
Instructions for connecting cable to an alternative plug:  
Important: the wires in the mains lead are coloured in  
accordance with the following code:  
Green & Yellow Earth  
Blue  
Brown  
Neutral  
Live  
As the colours of the wires in the lead may not correspond  
with the coloured markings identifyng the terminals in your  
plug, proceed as follows:  
Fig. 7  
Fig. 8  
Connect Green & Yellow wire to terminal marked E or  
or  
coloured Green or Green & Yellow.  
Connect Brown wire to terminal marked L or coloured Red.  
Connect Blue wire to terminal marked N or coloured Black.  
If a 13 amp plug (BS 1363) is used it must be fitted with a  
13 amp fuse, either in the plug or adaptor or at the  
distribution board.  
If you are in any doubt the electrical supply to your machine,  
consult a qualified electrician before use.  
Fig. 9  
How to connect an alternative plug:  
The wires in this mains lead are coloured in accordance with  
the following code:  
Electrical connection (figure 10)  
BLUE  
BROWN  
GREEN & YELLOW EARTH (E)  
NEUTRAL (N)  
LIVE (L)  
Your appliance is now supplied with a 13 amp fused plug it  
can be plugged into a 13 amp socket for immediate use.  
Before using the appliance please read the instructions below.  
Disposing of the appliance:  
WARNING - THIS APPLIANCE MUST BE EARTHED.  
THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT  
BY A QUALIFIED ELECTRICIAN.  
When disposing of the appliance please remove the plug by  
cutting the mains cable as close as possible to the plug body  
and dispose of it as described above.  
Replacing the fuse:  
When replacing a faulty fuse, a 13 amp ASTA approved fuse  
to BS 1362 should always be used, and the fuse cover re-  
fitted. If the fuse cover is lost, the plug must not be used  
until a replacement is obtained.  
GREEN &  
YELLOW  
13 ampere fuse  
BROWN  
CROSS-BAR  
CORD GRIP  
BLUE  
Replacement fuse covers:  
If a replacement fuse cover is fitted, it must be of the correct  
colour as indicated by the coloured marking or the colour  
that is embossed in words on the base of the plug.  
Replacements can be obtained directly from your nearest  
Service Depot.  
Fig. 10  
Removing the plug:  
If your appliance has a non-rewireable moulded plug and  
you should wish to re-route the mains cable through  
partitions, units etc., please ensure that either:  
the plug is replaced by a fused 13 ampere re-wearable plug  
bearing the BSI mark of approval.  
or:  
the mains cable is wired directly into a 13 amp cable outlet,  
controlled by a switch, (in compliance with BS 5733) which  
is accessible without moving the appliance.  
GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical characteristics  
WDG1195 WG  
model  
width cm 59,5  
height cm 85  
depth cm 55  
dimensions  
1 - 5 Kg  
capacity  
voltage 240 Volt 50Hz  
electrical  
maximum absorbed power 2300 W  
connections  
maximum pressure 100 N/cm2  
minimum pressure 5 N/cm2  
drum capacity 42 litres  
w ater  
connections  
up to 1100 rpm  
spinning speed  
This appliance conforms with the following E.E.C.  
directives:  
- 73/23/EEC of 19/02/73 (Low Voltage) and  
subsequent modifications  
- 89/336/EEC of 03/05/89 (Electromagnetic  
Compatibility) and subsequent modifications  
GB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Refrigerator IN TS 1610 UK User Manual
IPSO Washer CHM2097N User Manual
Jet Tools Saw JWTS 10 User Manual
Johnson Controls Furnace TM9V MP User Manual
JVC CRT Television 50051243 User Manual
JVC DVD Recorder CU VD20US User Manual
JVC MP3 Docking Station 0397MKVUNVP User Manual
Kidde CD Player 1276E User Manual
King Canada Sander KC 26DS User Manual
KitchenAid Microwave Oven YKCMS1555S User Manual