Indesit Clothes Dryer IDC 75 User Manual

Instruction manual  
TUMBLE DRYER  
Contents  
EN  
Important information, 2-3  
EN  
Installation, 4  
Where to install the tumble dryer  
Ventilation  
English, 1  
Electrical connections  
Preliminary information  
Description of the tumble dryer, 5  
Features  
Control panel  
How to carry out a drying cycle, 6  
Starting a drying programme  
Drying settings, 7  
Drying times  
Drying programmes and options  
IDC 75  
Laundry, 8  
Sorting laundry  
Care labels  
IDC 75 S  
Special items  
Drying times  
Warnings and suggestions, 9  
General safety  
Information on recycling and disposal  
Saving energy and respecting the environment  
Care and maintenance, 10  
Disconnecting the power supply  
Cleaning the filter after each cycle  
Checking the drum after each cycle  
Emptying the water container after each cycle  
Cleaning the condenser unit  
Cleaning the tumble dryer  
! Keep this manual at hand for immediate reference  
whenever necessary. Always store this manual close to the  
tumble dryer and remember to pass it on to any new owners  
when selling or transferring the appliance, so they may  
familiarise with the warnings and suggestions herein  
contained.  
Troubleshooting, 11  
Assistance and Guarantee, 12-13-14  
Spare parts  
! Read these instructions carefully: the following pages  
contain important information on installation and useful  
suggestions for operating the appliance.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condenser unit - remove any fluff build-up  
from the condenser on a monthly basis.  
EN  
Step 1  
Open the condenser cover  
- grip the handle and pull  
towards you.  
Step 2  
Remove the condenser by  
turning the 3 catches, then pull  
the condenser towards you. (It is  
normal for some residual water  
to be left in the tubes).  
Step 3  
Clean the condenser with running  
water over the rear side to  
remove any fluff deposits.  
Step 4  
Replace the condenser unit;  
make sure that the unit is  
securely in place, that all 3  
catches are fixed and that the  
position arrows on the front end  
of the condenser are pointing  
upwards.  
Failure to clean the condenser unit may cause  
premature faults to the dryer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Where to install the tumble dryer  
Electrical connections  
EN  
• Install the dryer far from gas  
ranges, stoves, radiators or  
hobs, as flames may damage it.  
If the dryer is installed below a  
worktop, ensure there are 10  
mm between the upper panel of  
the dryer and any objects  
Before plugging the appliance into the socket, check the following:  
• Make sure your hands are dry.  
• The socket must have an earth connection.  
• The socket must be able to withstand the machines  
maximum power output as indicated on the data plate (see  
Description of the tumble dryer).  
• The power supply voltage must fall within the values indicated  
on the data plate (see Description of the tumble dryer).  
• The socket must be compatible with the dryers plug.  
Should this not be the case, replace the plug or the socket.  
! Do not use extension cords.  
! The dryer must not be installed outdoors, even if the space is  
sheltered. It can be very dangerous if exposed to rain or storms.  
! Once installed, the dryers electrical wire and plug must  
be within reach.  
above it, and 15 mm between  
the sides of the machine and  
the walls or furniture units  
adjacent to it. This ensures  
adequate air circulation.  
Ventilation  
! The power cord must not be bent or squashed.  
! The power cord is supplied fitted with a BS1363 plug  
and with a 13 amp BS1362 fuse. If it is necessary to fit a  
replacement fuse, it must be a 13 Amp ASTA approved  
to BS1362 type. WARNING: The plug must not be used  
without a fuse cover. If a replacement fuse holder/cover is  
required, it must be of the same colour coding or wording as  
shown on the base of the plug.  
• The room must be adequately ventilated while the dryer is  
running. Make sure that the dryer is installed in a room free of  
humidity and with adequate air circulation. The flow of air  
around the dryer is essential to allow water to condense  
during drying; the dryer will not function properly if it is placed  
in an enclosed space or inside a cabinet.  
! Some condensation may form if the dryer is used in a small  
Replacements are available from authorised dealers.  
or cold room.  
Moulded plug  
! We do not recommend installing the dryer in a cupboard;  
moreover, never install the machine behind a lockable, sliding  
or hinged door located on the opposite side of the dryer  
door.  
Water drain  
If your dryer is installed next to a drain the water can be  
plumbed into this drain. This does away with the need to  
empty the water container. If the dryer is stacked onto or  
installed next to a washing machine it can share the same  
drain. The height of the drain must be less than 3' (1 m)  
from the bottom of the dryer.  
Changing the plug  
The wires in the power cord are coloured in accordance  
with the following.  
Remove existing hose from position shown in picture A  
and fit a suitable length of hose and connect as shown  
in picture B.  
13A ASTA approved fuse  
to BS 1362.  
Green and Yellow (Earth)  
wire to terminal marked  
“E”, symbol x, or coloured  
green and yellow.  
GREEN &  
YELLOW  
13 ampere fuse  
BROWN  
BLUE  
! Make sure that the hose is not squashed or kinked  
Brown (live) wire to teminal  
marked “L” or coloured  
red.  
when the dryer is in its final location.  
Blue (Neutral) wire to  
terminal marked ”N” or  
coloured black.  
CROSS-BAR  
CORD GRIP  
1
2
2
! If the plug being replaced is a non-rewirable type, then the  
cut-off plug must be disposed of safely. DO NOT leave it where  
it can be inserted into a socket and create a shock hazard.  
! The power cord should be checked periodically and replaced  
by a cord specially prepared for this dryer and fitted only by  
authorized technicians (see Service). New or longer power  
cords are supplied at an extra charge by authorized dealers.  
! The manufacturer denies any responsibility should any  
of these rules not be followed.  
1
m
1
<
H
Picture B  
Picture A  
!If in doubt about any of the above consult a qualified electrician.  
Preliminary information  
Once the tumble dryer is installed, clean the inside of the drum before  
operating it and remove any dirt accumulated during transportation.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of  
the tumble dryer  
Opening the door  
Features  
EN  
Data plate  
Water container  
Press the  
door  
Model &  
Serial  
Numbers  
Filter  
Air  
intake  
grille  
Condenser  
unit (cover  
open)  
Condenser cover  
handle (pull to  
open)  
Control panel  
Start  
button  
High Heat  
button  
Drying time  
selector knob  
Empty water  
container  
indicator light  
Drying time selector knob  
This is used to set the drying time: turn the knob in a clockwise direction until the indicator is set to the desired drying time (see  
Drying settings).  
High Heat button  
It can be used to customise the selected programme in accordance with your own requirements.  
START button  
Press the button to begin drying.  
Empty water container indicator light  
The “Empty water container” indicator light  
signals that the water container must be emptied.  
If the container becomes full during the programme, the tumble dryer will automatically start the cold air cycle.  
In order to avoid this procedure, always empty the water container after using the tumble dryer (see Care and maintenance).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to carry out a drying cycle  
Starting a drying programme  
EN  
1. Plug the dryer into the power supply socket.  
2. Select a suitable drying programme for the type of laundry (see Laundry).  
3. Open the door, ensure that the filter is clean and securely placed and that the water container is empty and correctly slotted (see  
Care and maintenance).  
4. Load the machine, making sure that no piece of laundry gets between the door and the relative seal. Close the door.  
5. Turn the TIMER knob until the indicator is pointing towards the most suitable drying time for the type of fabric in that load. Use  
the table to check the relationship between fabric type and load capacity (see Drying settings), and make sure you are familiar with  
the instructions provided for each type of fabric (see Laundry).  
6. If necessary, set the temperature using the HIGH HEAT button.  
7. Press the START button to start the drying cycle.  
Laundry can be checked while the drying programme runs and any garments already dry can be removed, while drying continues  
for the remaining items. After closing the door, press the START button to resume machine operation.  
8. The final COLD DRYING phase (i.e. the fabrics are cooled) activates during the last few minutes of the drying programme; always  
allow this phase to terminate.  
9. Open the door, remove the laundry then clean the filter and replace it. Empty the water container and put it back in its slot (see  
Care and maintenance).  
10. Disconnect the dryer from the power supply.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Drying settings  
Drying times  
EN  
The drying time depends on the size of the load and on the type of fabric it contains (see Table).  
The cold drying cycle runs during the final 10 minutes of the programme.  
! For large loads, select the High Heat option if available.  
Load  
Fabric  
1 kg  
2 kg  
3 kg  
4 kg  
50 - 70  
minutes  
5 - 6 kg  
80 - 110  
minutes  
7 kg  
120 - 160  
minutes  
Cotton –  
high heat  
Cotton –  
low heat  
Synthetics –  
low heat  
20 - 40  
minutes  
20 - 40  
minutes  
40 - 50  
minutes  
20 - 40  
minutes  
20 - 40  
minutes  
60 - 70  
minutes  
50 - 70  
minutes  
50 - 70  
minutes  
80 - 90  
minutes  
-
-
-
-
-
-
Drying programmes and options  
Refresh  
A short programme suitable for refreshing fibres and garments through the emission of cool air. It lasts about 20 minutes.  
! As this is not a drying programme, it is not to be used for garments that are still wet.  
High Heat button  
If you have selected a timed drying programme, press this button to select a high temperature. The timed programmes are pre-set  
to low heat.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Laundry  
Sorting laundry  
Care labels  
EN  
Check the symbols on the care labels of the various  
garments to verify whether the garments can be safely  
tumble dried.  
Always check the care labels, especially when placing  
garments in the tumble dryer for the first time. Below are the  
most commonly used symbols:  
• Sort laundry according to the type of fabric.  
• Empty all pockets and check for loose buttons.  
• Close zips and hooks and fasten belts and strings without  
tightening them.  
May be tumble dried.  
Do not tumble dry.  
Tumble dry – high heat.  
Tumble dry – low heat.  
• Wring out garments to remove the maximum amount of  
water possible.  
Items not suitable for tumble drying:  
! Do not load the dryer when garments are dripping wet.  
• Items containing rubber parts or similar materials, or  
plastic film covering (pillows, cushions or PVC sports  
jackets), any type of inflammable object or objects  
containing inflammable substances (used towels  
containing hairspray).  
Maximum load sizes  
Do not overload the drum.  
The following values indicate the weight of dry garments:  
Natural fibres: maximum 7 kg  
Synthetic fibres: maximum 3 kg  
• Glass fibres (certain types of draperies).  
• Items which have been previously dry cleaned.  
• Items marked with the ITLC symbol (“Special garments”)  
, which may be washed using special household  
products. Follow instructions carefully.  
! Do not overload the dryer as this may result is reduced  
drying performance.  
Typical weights  
• Large bulky items (duvets, sleeping bags, pillows,  
cushions, large bedcovers, etc.) that expand when dried  
and hamper air circulation inside the tumble dryer.  
Note: 1 kg = 1000 g  
Garments  
Special items  
Cotton  
Other  
150 g  
100 g  
500 g  
350 g  
Blouse  
Dress  
Blankets and bedcovers: acrylic items (Acilian, Courtelle,  
Orion, Dralon) must be dried with great care at low heat.  
Avoid drying for long periods.  
Cotton  
Other  
Creased or pleated garments: read the drying instructions  
supplied by the manufacturer.  
700 g  
Jeans  
Starched garments: do not dry together with non-  
starched items. Remove the maximum amount of starch  
solution possible before placing these items in the dryer. Do  
not over-dry: starch turns powdery leaving garments limp –  
this defeats its purpose.  
1,000 g  
10 Nappie  
300 g  
200 g  
Cotton  
Other  
Shirt  
T-shirt  
125 g  
Drying times  
Drying times are approximate and may vary depending on  
the following:  
Household linen  
Cotton  
Other  
1,500 g  
1,000 g  
Duvet cover  
(double bed)  
• Amount of water retained by items after the spin cycle:  
towels and delicate items retain a lot of water.  
• Fabrics: items of the same fabric, but with different texture  
and thickness may have different drying times.  
• Amount of laundry: single items and small loads will take a  
short time to dry.  
Large tablecloth  
700 g  
250 g  
100 g  
700 g  
350 g  
Small tablecloth  
Tea cloth  
Bath towel  
• Drying: if items are to be ironed, they can be removed  
from the dryer while still slightly damp. Items that require  
complete drying can be left longer.  
Hand towel  
Double bed  
sheet  
500 g  
350 g  
Temperature of the room: the lower the temperature of the  
room, the longer it will take for the dryer to dry clothing.  
• Bulk: certain bulky items require special care during the  
drying process. We suggest removing these items and  
replacing them in the dryer once they have been shaken  
out: repeat this procedure several times during the course  
of the drying cycle.  
Single bed sheet  
When mixing synthetic fibres with cotton garments, the  
latter may still be damp at the end of the drying cycle. If this  
happens, simply put them through a short drying cycle.  
Note: when setting the duration of the drying cycle,  
! Do not over-dry items.  
remember that the cold drying phase runs during the last 10  
minutes, during which the dryer does not dry the garments.  
All fabrics contain natural dampness which helps to keep  
them soft and fluffy.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
and suggestions  
• Complete each programme with the relative cold drying  
phase.  
!This appliance was designed and manufactured in  
compliance with current international safety standards. The  
following information is provided for safety reasons and  
must be read carefully.  
EN  
• Do not switch the tumble dryer off if items that are still  
warm are inside it.  
• Clean the filter after each use (see Care and maintenance).  
• Empty the water container and put it back in place after  
each use (see Care and maintenance).  
General safety  
• Clean the condenser unit regularly(see Care and maintenance).  
• Do not allow lint to build up around the tumble dryer.  
• Avoid climbing on the top of the dryer as this may  
damage the appliance.  
• This tumble dryer must not be used by persons (including  
children) with physical, sensory or mental impairments or  
with little experience and knowledge of the appliance,  
unless they are supervised or have been adequately  
instructed on its use by the person responsible for their  
safety.  
• Always comply with electrical regulations and  
requirements (see Installation).  
• Always purchase original accessories and spare parts  
(see Assistance).  
• This tumble dryer is designed for domestic and non-  
professional use.  
! WARNING: Never stop the dryer before the end of the  
drying cycle unless all items have been quickly removed and  
hung in order to dispel heat.  
• Do not touch the appliance while barefoot or with wet  
hands or feet.  
• Unplug the appliance by pulling on the plug, not the cord.  
• Do not allow children near the appliance while it is in  
function. After use, switch the appliance off and unplug it.  
Keep the appliance door closed to prevent children using  
it as a toy.  
Information on recycling  
and disposal  
As part of our continual commitment towards environmental  
protection, we reserve the right to use recycled quality  
components to reduce costs for our customers and to  
minimise materials wastage.  
• Disposing of the packaging materials: follow local  
regulations to allow for recycling of packaging materials.  
• In order to minimise the risk of injury to children, remove  
the door and plug, then cut the power supply cord flush  
with the appliance. Dispose of these parts separately to  
prevent the appliance from being connected to a power  
supply socket.  
• Children must be supervised to ensure that they do not  
play with the appliance.  
• The appliance must be correctly installed and receive  
adequate ventilation. The air intake on the front part of  
the dryer and the air vents on the rear must never be  
obstructed (see Installation).  
• Never use the dryer on carpeting with high pile as this  
may prevent air from entering the dryer from the base.  
• Check whether the dryer is empty before loading it.  
The rear part of the dryer may become very hot:  
do not touch it while the appliance is in function.  
• Do not use the dryer unless the filter, water container and  
condenser are properly positioned (see Maintenance).  
• Do not use liquid fabric softener in the dryer; add it to the  
final rinse of the wash cycle.  
Disposal of old household appliances  
European Directive 2002/96/EC concerning Waste  
Electrical and Electronic Equipment (WEEE) states  
that household appliances should not be disposed of  
using the normal solid urban waste cycle. Exhausted  
appliances should be collected separately in order to  
optimise the cost of re-using and recycling materials  
comprising the machine, while preventing potential damage  
to public health and the environment. The crossed-out  
wheeled bin symbol appears on all products to remind  
owners of the obligations regarding separate waste  
collection.  
• Do not overload the dryer (see Laundry for the maximum  
load sizes).  
• Do not add items that are dripping wet.  
Tumble dry items only if they have been washed with  
water and detergent, and have been rinsed and put  
through a spin cycle. Drying items that have NOT been  
washed with water may cause the risk of fire.  
• Always read the instructions on the care label carefully  
(see Laundry).  
Owners should contact their local authorities or appliance  
dealers for further information concerning the correct  
disposal of household appliances.  
• Do not tumble dry items that have been treated with  
chemical products.  
• Never tumble dry items that are contaminated with  
inflammable substances (cooking oil, acetone, alcohol,  
petrol, kerosene, stain removers, turpentine, waxes, wax  
removers and hairspray), unless they have been washed  
in hot water with an extra amount of detergent.  
• Do not tumble dry rubber, rubber-backed articles and  
garments, cushions with foam rubber padding, latex  
foam, rubber, plastic, shower caps, water-resistant  
fabrics, nappy pants or liners, polyethylene and paper.  
• Remove all objects from pockets, particularly lighters  
(risk of explosion).  
Saving energy and respecting the  
environment  
• Wring out items before tumble drying them to remove  
the maximum amount of water possible (if they are  
previously washed in a washing machine, select a spin  
cycle). This ensures that energy is saved during tumble  
drying.  
• Always use the tumble dryer at full load to save energy:  
single items and small loads may take longer to dry.  
• Clean the filter at the end of each cycle to reduce energy  
consumption costs (see Care and maintenance).  
• Do not tumble dry large, excessively bulky items.  
• Do not tumble dry acrylic fibres at high temperatures.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and maintenance  
Disconnecting the power supply  
Emptying the water container after  
each cycle  
EN  
! Disconnect the dryer when not in use or during cleaning  
Remove the water container and empty it into a sink or  
other suitable drain outlet, then replace it correctly.  
Always check the water container and empty it before  
starting a new drying cycle.  
and maintenance operations.  
Cleaning the filter after each cycle  
The filter is a fundamental component of the dryer: its  
function is to collect lint and fluff that form during drying.  
Clean the filter once drying is completed, by rinsing it under  
running water or cleaning it with a vacuum cleaner. Should the  
filter become clogged, the flow of air inside the dryer will be  
seriously hampered: drying times becomes longer and more  
energy is consumed. Moreover, the dryer may become  
damaged.  
Cleaning the condenser unit  
• Remove the condenser (see Picture below) unit regularly  
(monthly) and clean off any fluff deposits from the plates  
by rinsing it with cold water running on the rear end of the  
condenser.  
Removing the condenser:  
1. Disconnect the dryer from the power supply and open the  
door.  
The filter is located in front of the dryer seal (see Picture).  
Removing the filter:  
1. Pull the filters plastic  
2. Open the condenser cover (see Picture below), unlock the  
three catches by turning them 90° anti-clockwise, then  
pull on the grip to remove the condenser.  
3. Clean the surface of the seals and replace the unit with the  
arrows pointing upwards, while making sure that the  
catches are securely fixed.  
handle upwards (see  
Picture).  
2. Clean the fluff off the filter  
and replace it correctly.  
Ensure that the filter is  
placed flush with the dryer  
seal.  
Cleaning the tumble dryer  
• The external metal and plastic parts and the rubber parts  
can be cleaned with the aid of a damp cloth.  
! Do not use the dryer  
unless the filter has been  
replaced in its holder.  
• Clean the front air intake grille regularly (every 6 months)  
with a vacuum cleaner to remove any lint, fluff or dust  
deposits. Furthermore, remove any lint deposits from the  
front part of the condenser and from the filter area, using a  
vacuum cleaner every so often.  
Checking the drum after each cycle  
Rotate the drum manually to remove smaller items  
(handkerchiefs) that could have been left inside the dryer.  
Cleaning the drum  
! Do not use solvents or abrasives.  
! The dryer uses ball bearing components that do not  
require lubrication.  
! Avoid using abrasives, steel wool or stainless steel  
cleaning agents to clean the drum.  
!Have the dryer checked regularly by authorised technical  
personnel in order to ensure that the electrical and  
mechanical parts work safely (see Assistance).  
A coloured film may appear on the stainless steel drum  
surface: it may be caused by a combination of water and/or  
cleaning agents such as wash-softeners. This coloured film  
does not affect the dryers performance.  
Water  
container  
Filter  
Tap  
Rear  
Condenser unit  
Air intake  
Front  
Condenser unit  
Condenser cover  
Catches  
Handle  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you feel that the dryer is not working properly, consult the following troubleshooting suggestions before contacting the Technical  
Assistance Centre (see Assistance).  
EN  
Problem:  
Possible causes / Solutions:  
The dryer does not start.  
• The plug has not been inserted far enough into the socket to make contact.  
• There has been a power cut.  
• The fuse has burned out. Try connecting another appliance to the same socket.  
• If an extension cord is used, try connecting the dryer plug directly into the socket.  
• The door has not been closed properly.  
• The programme has not been set correctly (see How to carry out a drying cycle).  
• The START button has not been pressed (see How to carry out a drying cycle).  
Drying times are too long.  
• The filter has not been cleaned (see Care and maintenance).  
• The water container must be emptied? The “Empty water container” indicator light  
flashes (see Care and maintenance).  
• The condenser needs to be cleaned (see Care and maintenance).  
• An incorrect drying time was selected for the type of load (see Laundry).  
• The air intake grille are clogged up (see “Installation” and “Care and Maintenance”).  
• The items are too wet (see Laundry).  
• The dryer is overloaded (see Laundry).  
• The water container was probably not emptied before starting the programme. Do  
not wait for the signal for emptying the water container, but always check and  
empty it before starting a new drying programme (see Description of the tumble  
dryer).  
The “Empty water container”  
indicator light flashes, but the  
dryer has been running for a short  
time.  
The “Empty water container”  
indicator light is on but the water  
container is not full.  
• It is normal: the “Empty water container” indicator light flashes when the water  
container is full. If the indicator light is on but is not flashing, it only signals that the  
water container must be emptied (see Description of the tumble dryer).  
• This is normal, especially if the dryer has not been used for a long time. If the noise  
persists during the entire cycle, contact the Technical Assistance Centre.  
The dryer is noisy during the first  
few minutes of operation.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assistance  
Before contacting the Technical Assistance  
Centre:  
Spare parts  
EN  
This dryer is a complex machine. Attempting to repair it  
personally or with the aid unqualified personnel may put  
the safety of people at risk, damage the machine or  
invalidate the spare parts guarantee.  
• Follow the troubleshooting guide to check whether  
problems can be solved personally (see Troubleshooting).  
• If not, switch the dryer off and contact the Technical  
Assistance Centre closest to you.  
Always contact a qualified technician when experiencing  
problems with this machine. The spare parts were  
designed exclusively for this machine and should not be  
used for any other purpose.  
Provide the following data when contacting the  
Technical Assistance Centre:  
• name, address and postal code  
• telephone number  
• type of malfunction  
• date of purchase  
• the appliance model (Mod.)  
• the dryers serial number (S/N)  
This information can be found on the data plate located  
behind the door.  
This appliance conforms to the following EEC directives:  
- 2006/95/EC (Low Voltage Directive)  
- 89/336/EEC, 92/31/EEC, 93/68/EEC (Electromagnetic Compatibility Directive).  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guarantee  
12 Months Parts and Labour Guarantee  
EN  
Your appliance has the benefit of our manufacturers guarantee, which covers the cost of breakdown repairs for twelve  
months from the date of purchase.  
This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either  
workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.  
This guarantee is subject to the following conditions:  
-
The appliance has been installed and operated correctly and in accordance with our operating and  
maintenance instructions.  
-
-
-
The appliance is used only on the electricity or gas supply printed on the rating plate.  
The appliance has been used for normal domestic purposes only.  
The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any  
person not authorised by us.  
-
-
-
Any repair work must be undertaken by us or our appointed agent.  
Any parts removed during repair work or any appliance that is replaced become our property.  
The appliance is used in the United Kingdom or Republic of Ireland.  
The guarantee does not cover:  
-
-
-
Damage resulting from transportation, improper use, neglect or interference or as a result of improper  
installation.  
Replacement of any consumable item or accessory. These include but are not limited to:  
plugs, cables, batteries, light bulbs, fluorescent tubes and starters, covers and filters.  
Replacement of any removable parts made of glass or plastic.  
THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR  
NON-DOMESTIC PREMISES.  
5 Year Parts Guarantee  
Indesit also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your  
appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer's  
time. To activate the extra parts warranty on your appliance, simply call our registration line on 08448 24 24 24  
(Republic of Ireland 01 230 0800)  
Extended Guarantees  
We offer a selection of repair protection plans that enable you to fully cover yourself against the expense of repair bills for  
the life of your policy. To find the ideal plan for you please call our advice line on  
08448 226 226 (Republic of Ireland 01 230 0233).  
Free Helpdesk Service  
We have a dedicated team who can provide free advice and assistance with your appliance if you experience any  
technical difficulties within the first 90 days of ownership. Simply call our Indesit Service Hotline on 08448 224 224  
(Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an engineer to call.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
EN  
No one is better placed to care for your Indesit appliance during the course of its working life than us - the manufacturer.  
Essential Contact Information  
Indesit Service  
We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified  
engineers on call to ensure you receive fast, reliable, local service.  
UK: 08448 224 224  
Republic of Ireland: 0818 313 413  
Please note: Our advisors will require the following information:  
Model number:  
Serial number:  
Parts and Accessories  
We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically clean  
your appliance to keep it looking good and functioning efficiently throughout its life.  
UK: 08448 225 225  
Republic of Ireland: 0818 313 413  
Appliance Registration  
We want to give you additional benefits of Indesit ownership. To activate your free 5 year parts guarantee you must  
register your appliance with us.  
UK: 08448 24 24  
Republic of Ireland: 01 230 0800  
Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB  
Indesit Company Unit 49 Airways Industrial Estate, Dublin 17  
Recycling & Disposal Information  
As part of Indesit's continued commitment to helping the environment, Indesit reserves the right to use quality, recycled  
components to keep down customer costs and minimise material wastage.  
Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children, remove the door, plug  
and cut the mains cable off flush with the appliance. Dispose of these parts separately to ensure that the appliance can  
no longer be plugged into a mains socket, and the door cannot be locked shut.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
195075033.00  
02/2009  
-
Xerox Fabriano  
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer IWDC6125S User Manual
ION Photo Scanner FILM 2 SD PRO User Manual
JVC Speaker System CA MXJ880V User Manual
Kambrook Hot Beverage Maker KAK5 User Manual
Kawasaki Battery Charger 840095 User Manual
King Canada Washer KPW 205 User Manual
KitchenAid Dishwasher 8564554 User Manual
Kolcraft Stroller S45J T 5 07 User Manual
Korg TV Receiver TM 40 User Manual
Kramer Electronics Car Amplifier 123V User Manual