On-Premise
Laundry
Planning
Handbook
CHM2097N
IHC Washer-Extractors
Refer to Installation manual for full instructions.
5-08-52R1
June 2011
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Introduction
Model Identification - IHC Washer-Extractors
CHM2097N
Figure 1
IHC012
IHC018
IHC025
IHC030
IHC035
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Specifications and Dimensions - Model IHC012
Capacity (dry weight) Ratio (kg/l)
1:11
1:10
1:9
11.02 lb. (5 kg)
12.13 lb. (5.5 kg)
13.45 lb. (6.1 kg)
Cylinder
Cylinder diameter, in. (mm)
Cylinder depth, in. (mm)
20.87 (530)
9.84 (250)
1.94 (55)
3
Cylinder volume, ft. (l)
Cabinet
Overall height, in. (mm)
Overall width, in. (mm)
Overall depth, in. (mm)
40.87 (1038)
25.98 (660)
22.64 (575)
Front Loading
Door opening size, in. (mm)
11.81 (300)
10.98 (279)
19.88 (505)
Height of door bottom above floor, in (mm)
Height of door center above floor, in (mm)
Speed
Wash
10-50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250-1250 tr/min - RPM
G-factor
High Spin
462
0.74 HP/0.55 kW
2 (51)
Motor (3 phase), 4p, 1470 tr/min
Drain Valve, in. (mm)
.75 (19)
Water Supply (hard, soft, warm water), in. (mm)
Direct Steam Heating
Steam inlet connection size, in. (mm)
Electrical
Not Applicable
Electrical Heating (230/400 V)
Electrical Heating (400V)
Steam
4.2 kW
6 kW
Not Applicable
Not Applicable
Not Applicable
Warm Water (without additional heating)
Warm Water (with additional heating)
44.88 X 29.13 X 33.07
(1140 X 740 X 840)
Packing Dimensions (height X width X depth), in. (mm)
Weight
Net weight, lb. (kg)
Gross weight, lb. (kg)
405.65 (184)
436.52 (198)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
3
Washer-Extractors
Machine Dimensions - Model IHC012
6.4 in.
(163 mm)
1.3 in.
(33 mm)
1.3 in.
(33 mm)
1.18 in.
(30 mm)
1.18 in.
(30 mm)
2.56 in.
(65 mm)
2.56 in.
(65 mm)
20.87 in. (530 mm)
25.98 in. (660 mm)
19.09 in. (485 mm)
CHM2200N
22.24 in. (565 mm)
24.49 in. (622 mm)
CHM2100N
8.9 in.
2.72 in.
(69 mm)
(226 mm)
5.94 in.
(151 mm)
2.95 in.
CHM2201N
CHM220
2
3
4
(75 mm)
1
5
6
10
4.3 in.
(109 mm)
7
9
7.09 in.
(180 mm)
1.73 in.
(44 mm)
8
25.98 in. (660 mm)
CHM2202N
1
2
3
4
5
Ventilation Soap Dispenser
Warm Water Connections .75 in.
Liquid Soap Connections
Soft Water Connections .75 in.
Main Switch
6
7
8
9
10
Electrical Connections
Ventilation Tub
Drain Valve
Bolt Pattern for Fixation of the Machine
Hard Water Connections .75 in.
Figure 2
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Mounting Bolt Hole Locations - Model IHC012
1.18 in.
(30 mm)
ø0.71 in.
(ø18 mm)
1.18 in.
(30 mm)
2.56 in.
(65 mm)
2.56 in.
20.87 in. (530 mm)
(65 mm)
25.98 in. (660 mm)
CHM2203N
CHM2203N
Figure 3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
5
Washer-Extractors
WARNING
Only trained personnel should perform this
procedure. Use caution while servicing
machines with covers removed and power
applied.
W700
Electrical Installation Requirements - Model IHC012
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N/A
12/4.0
10/6.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
3
7
7
7
10
15
15
15
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
N/A
16
N/A
20
N/A
20
3x2 kW
Q
X
23
30
32
200-240 50/60 1/3 2/3+PE
N/A
N/A
N/A
Alternative Electric Heat Options
N/A
14/2.5
12/4.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A
13
N/A
15
N/A
16
3x1.4 kW
Q
X
18
20
20
200-240 50/60 1/3 2/3+PE
N/A
N/A
N/A
Table 1
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Specifications and Dimensions - Model IHC018
Capacity (dry weight) Ratio (kg/l)
1:11
1:10
1:9
15.21 lb. (6.9 kg)
16.76 lb. (7.6 kg)
18.52 lb. (8.4 kg)
Cylinder
Cylinder diameter, in. (mm)
Cylinder depth, in. (mm)
20.87 (530)
13.58 (345)
2.68 (76)
3
Cylinder volume, ft. (l)
Cabinet
Overall height, in. (mm)
Overall width, in. (mm)
Overall depth, in. (mm)
40.87 (1038)
25.98 (660)
29.09 (739)
Front Loading
Door opening size, in. (mm)
11.81 (300)
10.98 (279)
19.88 (505)
Height of door bottom above floor, in (mm)
Height of door center above floor, in (mm)
Speed
Wash
10-50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250-1000 tr/min - RPM
G-factor
High Spin
296
1.01 HP/0.75 kW
2 (51)
Motor (3 phase), 4p, 1470 tr/min
Drain Valve, in. (mm)
.75 (19)
Water Supply (hard, soft, warm water), in. (mm)
Direct Steam Heating
Steam inlet connection size, in. (mm)
Electrical
.38 (10)
Electrical Heating (230/400 V)
Electrical Heating (400V)
Steam
4.2 kW - 6 kW - 9 kW
12 kW
Not Applicable
Not Applicable
Not Applicable
Warm Water (without additional heating)
Warm Water (with additional heating)
44.88 X 29.13 X 33.07
(1140 X 740 X 840)
Packing Dimensions (height X width X depth), in. (mm)
Weight
Net weight, lb. (kg)
Gross weight, lb. (kg)
465.18 (211)
513.68 (233)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
7
Washer-Extractors
Machine Dimensions - Model IHC018
8.66 in.
(220 mm)
1.3 in.
(33 mm)
2.56 in.
1.3 in.
(33 mm)
1.18 in.
(30 mm)
1.18 in.
(30 mm)
20.87 in.
(530 mm)
2.56 in.
(65 mm)
(65 mm)
25.98 in.
(660 mm)
23.23 in.
(590 mm)
CHM2204N
26.38 in.
(670 mm)
CHM2204N
8.9 in.
2.72 in.
(69 mm)
28.62 in.
(727 mm)
(226 mm)
5.94 in.
(151 mm)
CHM2205N
CHM2
2.95 in.
(75 mm)
1
2
3
4
5
10
6
9
4.3 in.
(109 mm)
7
7.09 in.
(180 mm)
1.73 in.
(44 mm)
8
25.98 in. (660 mm)
CHM2206N
1
2
3
4
5
Ventilation Soap Dispenser
Warm Water Connections .75 in.
Liquid Soap Connections
Soft Water Connections .75 in.
Main Switch
6
7
8
9
10
Electrical Connections
Ventilation Tub
Drain Valve
Steam Connections
Hard Water Connections .75 in
Figure 4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Mounting Bolt Hole Locations - Model IHC018
1.18 in.
(30 mm)
ø0.71 in.
(ø18 mm)
1.18 in.
(30 mm)
2.56 in.
2.56 in.
(65 mm)
20.87 in. (530 mm)
(65 mm)
25.98 in. (660 mm)
CHM2207N
CHM2207N
Figure 5
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
9
Washer-Extractors
WARNING
Only trained personnel should perform this
procedure. Use caution while servicing
machines with covers removed and power
applied.
W700
Electrical Installation Requirements - Model IHC018
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N/A
10/6.0
10/6.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
4
10
15
15
15
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
N/A
21
N/A
30
N/A
25
3+N+PE 12
3x2 kW
Q
X
3+PE
12
12
27
30
32
200-240 50/60 1/3 2/3+PE
N/A
N/A
N/A
Alternative Electric Heat Options
N/A
12/4.0
10/6.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A
18
N/A
20
N/A
20
3x1.4 kW
3x3 kW
3x4 kW
Q
X
N
P
23
30
25
200-240 50/60 1/3 2/3+PE
N/A
N/A
25
N/A
N/A
30
N/A
N/A
32
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
10/6.0
8/10.0
N/A
40
40
35
Q
X
N
P
200-240 50/60 1/3 2/3+PE
N/A
21
N/A
30
N/A
25
10/6.0
8/10.0
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
40
32
29
Q
X
N/A
N/A
N/A
N/A
N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
Table 2
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Specifications and Dimensions - Model IHC025
Capacity (dry weight) Ratio (kg/l)
1:11
1:10
1:9
18.96 lb. (8.6 kg)
20.94 lb. (9.5 kg)
23.15 lb. (10.5 kg)
Cylinder
Cylinder diameter, in. (mm)
Cylinder depth, in. (mm)
20.87 (530)
17.32 (440)
3.35 (95)
3
Cylinder volume, ft. (l)
Cabinet
Overall height, in. (mm)
Overall width, in. (mm)
Overall depth, in. (mm)
40.87 (1038)
25.98 (660)
33.03 (839)
Front Loading
Door opening size, in. (mm)
11.81 (300)
10.98 (279)
19.88 (505)
Height of door bottom above floor, in (mm)
Height of door center above floor, in (mm)
Speed
Wash
10-50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250-1000 tr/min - RPM
G-factor
High Spin
296
1.01 HP/0.75 kW
2 (51)
Motor (3 phase), 4p, 1470 tr/min
Drain Valve, in. (mm)
.75 (19)
Water Supply (hard, soft, warm water), in. (mm)
Direct Steam Heating
Steam inlet connection size, in. (mm)
Electrical
.38 (10)
Electrical Heating (230/400 V)
Electrical Heating (400V)
Steam
4.2 kW - 6kW - 9 kW
12 kW
Not Applicable
Not Applicable
Not Applicable
Warm Water (without additional heating)
Warm Water (with additional heating)
49.21 X 29.13 X 37.40
(1250 X 740 X 950)
Packing Dimensions (height X width X depth), in. (mm)
Weight
Net weight, lb. (kg)
Gross weight, lb. (kg)
520.29 (236)
568.79 (258)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
11
Washer-Extractors
Machine Dimensions - Model IHC025
8.66 in.
(220 mm)
1.3 in.
(33 mm)
1.3 in.
(33 mm)
20.87 in.
(530 mm)
2.56 in.
(65 mm)
2.56 in.
(65 mm)
1.18 in.
(30 mm)
1.18 in.
(30 mm)
25.98 in.
(660 mm)
CHM2204N
27.16 in.
CHM2204N
(690 mm)
8.9 in.
(226 mm)
30.31 in.
(770 mm)
5.94 in.
(151 mm)
2.72 in.
(69 mm)
32.56 in.
(827 mm)
2.95 in.
(75 mm)
CHM2209N
1
3
2
CHM
4
5
10
9
6
4.3 in.
(109 mm)
7
7.09 in.
(180 mm)
1.73 in.
(44 mm)
8
25.98 in. (660 mm)
CHM2206N
1
2
3
4
5
Ventilation Soap Dispenser
Warm Water Connections .75 in.
Liquid Soap Connections
Soft Water Connections .75 in.
Main Switch
6
7
8
9
10
Electrical Connections
Ventilation Tub
Drain Valve
Steam Connections
Hard Water Connections .75 in
Figure 6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Mounting Bolt Hole Locations - Model IHC025
1.18 in.
(30 mm)
ø0.71 in.
(ø18 mm)
1.18 in.
(30 mm)
2.56 in.
20.87 in.
2.56 in.
(65 mm)
(530 mm)
(65 mm)
25.98 in.
(660 mm)
CHM2211N
CHM2211N
Figure 7
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
WARNING
Only trained personnel should perform this
procedure. Use caution while servicing
machines with covers removed and power
applied.
W700
Electrical Installation Requirements - Model IHC025
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
N/A
10/6.0
10/6.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
4
10
15
15
15
10
16
16
16
14/2.5
14/2.5
14/2.5
14/2.5
N/A
21
N/A
30
N/A
25
3+N+PE 12
3x2 kW
Q
X
3+PE
12
12
27
30
32
200-240 50/60 1/3 2/3+PE
N/A
N/A
N/A
Alternative Electric Heat Options
N/A
12/4.0
10/6.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
N/A
18
N/A
20
N/A
20
3x1.4 kW
3x3 kW
3x4 kW
Q
X
N
P
23
30
25
200-240 50/60 1/3 2/3+PE
N/A
N/A
25
N/A
N/A
30
N/A
N/A
32
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
10/6.0
8/10.0
N/A
40
40
35
Q
X
N
P
200-240 50/60 1/3 2/3+PE
N/A
21
N/A
30
N/A
25
10/6.0
8/10.0
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
40
32
29
Q
X
N/A
N/A
N/A
N/A
N/A
N/A
N/A
200-240 50/60 1/3 2/3+PE
Table 3
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Specifications and Dimensions - Model IHC030
Capacity (dry weight) Ratio (kg/l)
1:11
1:10
1:9
26.46 lb. (12 kg)
29.10 lb. (13.2 kg)
31.97 lb. (14.5 kg)
Cylinder
Cylinder diameter, in. (mm)
Cylinder depth, in. (mm)
25.59 (650)
15.75 (400)
4.66 (132)
3
Cylinder volume, ft. (l)
Cabinet
Overall height, in. (mm)
Overall width, in. (mm)
Overall depth, in. (mm)
47.32 (1202)
30.71 (780)
33.15 (842)
Front Loading
Door opening size, in. (mm)
11.81 (300)
14.78 (376)
23.82 (605)
Height of door bottom above floor, in (mm)
Height of door center above floor, in (mm)
Speed
Wash
10-50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250-1000 tr/min - RPM
G-factor
High Spin
363
2.01 HP/1.5 kW
2 (51)
Motor (3 phase), 4p, 1470 tr/min
Drain Valve, in. (mm)
.75 (19)
Water Supply (hard, soft, warm water), in. (mm)
Direct Steam Heating
Steam inlet connection size, in. (mm)
Electrical
.38 (10)
Electrical Heating (230/400 V)
Electrical Heating (400V)
Steam
12 kW - 15 kW - 18 kW
21 kW - 24 kW
Not Applicable
Warm Water (without additional heating)
Warm Water (with additional heating)
Not Applicable
Not Applicable
51.57 X 33.46 X 37.01
(1310 X 850 X 940)
Packing Dimensions (height X width X depth), in. (mm)
Weight
Net weight, lb. (kg)
Gross weight, lb. (kg)
716.50 (325)
782.64 (355)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
15
Washer-Extractors
Machine Dimensions - Model IHC030
8.66 in.
3.47 in.
(220 mm)
(88 mm)
1.34 in.
1.34 in.
(34 mm)
(34 mm)
25.51 in. (648 mm)
30.71 in. (780 mm)
2.6 in.
(66 mm)
1.44 in.
(36.5 mm)
2.6 in.
(66 mm)
26.18 in.
(665 mm)
1.44 in.
(36.5 mm)
29.92 in.
(760 mm)
CHM2212N
3.23 in.
(82 mm)
32.13 in.
(816 mm)
CHM2212N
13.05 in.
(332 mm)
10.49 in.
(267 mm)
CHM2213N
CHM2213N
7.93 in.
(202 mm)
2
3
4
4.13 in.
(105 mm)
1
5
10
6
7
25.98 in.
(660 mm)
2.36 in.
(60 mm)
7.87 in.
(200 mm)
8
9
CHM2214N
1
2
3
4
5
Ventilation Soap Dispenser
6
7
8
9
10
Electrical Connections
Ventilation Tub
Drain Valve
Steam Connections
Liquid Soap Connections
Warm Water Connections .75 in.
Hard Water Connections .75 in
Soft Water Connections .75 in.
Main Switch
Figure 8
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Mounting Bolt Hole Locations - Model IHC030
1.44 in.
(36.5 mm)
ø0.71 in.
(ø18 mm)
1.44 in.
(36.5 mm)
25.51 in.
(648 mm)
2.58 in.
(66 mm)
2.62 in.
(66 mm)
30.71 in.
(780 mm)
CHM2215N
Figure 9
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
WARNING
Only trained personnel should perform this
procedure. Use caution while servicing
machines with covers removed and power
applied.
W700
Electrical Installation Requirements - Model IHC030
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
10/6.0
8/10.0
6/16.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
6
15
20
20
20
10
20
20
20
14/2.5
12/4.0
12/4.0
12/4.0
23
36
30
40
32
40
3+N+PE 18
6x2 kW
Q
X
3+PE
18
18
49
60
60
200-240 50/60 1/3 2/3+PE
N/A
N/A
N/A
Alternative Electric Heat Options
8/10.0
8/10.0
6/16.0
6/16.0
8/10.0
8/10.0
4/25.00
4/25.00
8/10.0
6/16.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
28
40
40
50
40
50
3x3 kW
+
3x2 kW
Q
X
N
P
56
60
60
200-240 50/60 1/3 2/3+PE
56
60
60
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
32
40
40
50
50
44
6x3 kW
70
70
63
Q
X
N
P
70
70
63
200-240 50/60 1/3 2/3+PE
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
36
40
40
3x3 kW
+
3x4 kW
60
60
49
N/A
N/A
41
N/A
N/A
50
N/A
N/A
50
Q
X
N
P
N/A
200-240 50/60 1/3 2/3+PE
8/10.0
6/16.0
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
60
60
53
6x4 kW
N/A
N/A
N/A
N/A
N/A
N/A
Q
X
N/A
200-240 50/60 1/3 2/3+PE
Table 4
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Specifications and Dimensions - Model IHC035
Capacity (dry weight) Ratio (kg/l)
1:11
1:10
1:9
33.07 lb. (15 kg)
36.38 lb. (16.5 kg)
40.34 lb. (18.3 kg)
Cylinder
Cylinder diameter, in. (mm)
Cylinder depth, in. (mm)
25.59 (650)
19.69 (500)
5.83 (165)
3
Cylinder volume, ft. (l)
Cabinet
Overall height, in. (mm)
Overall width, in. (mm)
Overall depth, in. (mm)
47.32 (1202)
30.71 (780)
37.09 (942)
Front Loading
Door opening size, in. (mm)
11.81 (300)
14.78 (376)
23.82 (605)
Height of door bottom above floor, in (mm)
Height of door center above floor, in (mm)
Speed
Wash
10-50 tr/min - RPM
85 tr/min - RPM
Distribution
Spin
250-1000 tr/min - RPM
G-factor
High Spin
363
2.01 HP/1.5 kW
2 (51)
Motor (3 phase), 4p, 1470 tr/min
Drain Valve, in. (mm)
.75 (19)
Water Supply (hard, soft, warm water), in. (mm)
Direct Steam Heating
Steam inlet connection size, in. (mm)
Electrical
.38 (10)
Electrical Heating (230/400 V)
Electrical Heating (400V)
Steam
12 kW - 15 kW - 18 kW
21 kW - 24 kW
Not Applicable
Warm Water (without additional heating)
Warm Water (with additional heating)
Not Applicable
Not Applicable
51.57 X 33.46 X 42.52
(1310 X 850 X 1080)
Packing Dimensions (height X width X depth), in. (mm)
Weight
Net weight, lb. (kg)
Gross weight, lb. (kg)
789.25 (358)
855.39 (388)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
19
Washer-Extractors
Machine Dimensions - Model IHC035
8.66 in.
(220 mm)
3.47 in.
(88 mm)
1.34 in.
1.34 in.
(34 mm)
2.6 in.
(66 mm)
(34 mm)
25.51 in.
(648 mm)
1.44 in.
(36.5 mm)
1.44 in.
(36.5 mm)
30.12 in. (765 mm)
33.86 in. (860 mm)
36.06 in. (916 mm)
2.6 in.
(66 mm)
30.71 in.
(780 mm)
CHM2216N
CHM2216N
3.23 in.
(82 mm)
13.05 in.
(332 mm)
CHM2217N
CHM2217
10.49 in. (267 mm)
2
3
7.93 in. (202 mm)
4.13 in. (105 mm)
4
5
1
6
10
9
2.36 in.
(60 mm)
7.87 in.
(200 mm)
7
8
CHM2218N
1
Ventilation Soap Dispenser
Warm Water Connections .75 in.
Soft Water Connections .75 in.
Ventilation Tub
6
7
8
9
10
Electrical Connections
Drain Valve
Steam Connections
Hard Water Connections .75 in.
Liquid Soap Connections
2
3
4
5
Main Switch
Figure 10
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Mounting Bolt Hole Locations - Model IHC035
1.44 in.
(36.5 mm)
ø0.71 in.
(ø18 mm)
1.44 in.
(36.5 mm)
2.58 in.
(66 mm)
25.51 in.
(648 mm)
2.62 in.
(66 mm)
30.71 in.
(780 mm)
CHM2219N
CHM2219N
Figure 11
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
WARNING
Only trained personnel should perform this
procedure. Use caution while servicing
machines with covers removed and power
applied.
W700
Electrical Installation Requirements - Model IHC035
Boiler Fed/Steam Heat
Electric Heat
US NON-US
US NON-US
8/10.0
8/10.0
4/25.0
4/25.0
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
6
15
20
20
20
10
20
20
20
14/2.5
12/4.0
12/4.0
12/4.0
32
44
63
63
40
50
70
70
40
50
70
70
3+N+PE 18
6x3 kW
Q
X
3+PE
18
18
200-240 50/60 1/3 2/3+PE
Alternative Electric Heat Options
10/6.0
8/10.0
6/16.0
N/A
N
P
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
23
36
30
40
32
40
6x2 kW
Q
X
N
P
49
60
60
N/A
28
N/A
40
N/A
40
200-240 50/60 1/3 2/3+PE
8/10.0
8/10.0
6/16.0
6/16.0
8/10.0
6/16.0
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
3x3 kW
+
3x2 kW
50
50
40
60
60
56
Q
X
N
P
60
60
56
200-240 50/60 1/3 2/3+PE
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
36
40
40
3x3 kW
+
3x4 kW
60
60
49
N/A
N/A
41
N/A
N/A
50
N/A
N/A
50
Q
X
N
P
N/A
200-240 50/60 1/3 2/3+PE
8/10.0
6/16.0
N/A
440-480 50/60
380-415 50/60
200-240 50/60
3
3
3
3+PE
3+N+PE
3+PE
60
60
53
6x4 kW
N/A
N/A
N/A
N/A
N/A
N/A
Q
X
N/A
200-240 50/60 1/3 2/3+PE
Table 5
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5-08-52
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Washer-Extractors
Installation - IHC Models
CAUTION
Ensure that the machine is installed on a
level floor of sufficient strength and that
the recommended clearances for
inspection and maintenance are provided.
Never allow the inspection and
maintenance space to be blocked.
SW020
Surface
The machine must be securely fixed on a flat surface
(metal base, concrete or solid ground). The anchoring
is to be done on the 6 provided places in the holes on
the corner of the base. (See Mounting Bolt Hole
CHM2102N
1
CHM2102N
1
Mounting Bolt Holes
Figure 12
The machine must be placed entirely level. For easy
maintenance it is recommended to keep a minimal
distance of 23.62 in. (600 mm) between the wall and
the back of the machine.
If several machines are placed next to each other, there
should be a minimal distance of 1.18 in. (30 mm)
between each machine.
IMPORTANT: The bolt pattern for the fixation of
the IHC012 machine is located in the back panel of
the cabinet. Put this panel on the floor and mark
the holes.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Download from Www.Somanuals.com. All Manuals Search And Download.
5-08-52
23
|