Snapper Lawn Mower Prestige 1800 User Manual

OPERATOR’S  
MANUAL  
Prestige / 1800 / 2800 / 500 Series  
Conquest / 1700 / 2700 / 400 Series  
M23fgH. NPo.Hydro Tractors  
44fg. NMoo. wDeersDcreipctikosn  
Description  
2690638  
2690656  
2690657  
2690679  
2690744  
2690753  
2690754  
2690765  
2690789  
2690790  
2690805  
2690806  
Conquest, 23HP 4WD & 44” Mower  
95028  
1695033  
1695391  
1695400  
1695401  
44” Mower Deck (CE)  
Conquest, 23HP & 44” Mower (CE)  
YT2344, 23HP & 44” Mower (CE)  
Conquest, 23HP 4WD & 50” Mower (CE)  
Conquest, 23HP 4WD & 50” Mwer  
Conquest, 23HP & 44” Mowe)  
YT2344, 23HP & 44” Mower (C
YT2344, 23HP 4WD & ” Mower (CE)  
Conquest, 23HD & 50” Mower (CE)  
Conquest, 23HWD & 50” Mower (CE)  
Conquest, 23HP & 50” Mower (CE)  
YT2350, 23HP & 50” Mower (CE)  
44” Mower Deck (CE)  
44” Mower Deck  
44” Mower Deck (CE)  
44” Mower Deck (CE)  
M50fg. NMoo. wDeersDcreipctikosn  
1695185  
1695213  
1695263  
1695265  
1695390  
1695392  
1695393  
1695395  
1695417  
1695418  
1695588  
1695589  
50” Mower Deck (CE)  
50” Mower Deck  
50” Mower Deck (CE)  
50” Mower Deck (CE)  
50” Mower Deck  
M25fgH. NPo.Hydro Tractors  
50” Mower Deck  
Description  
50” Mower Deck  
2690571  
Prestige, 25HP & 50” Mower (CE)  
50” Mower Deck  
50” Mower Deck (CE)  
50” Mower Deck (CE)  
50” Mower Deck (CE)  
50” Mower Deck (CE)  
M27fgH. NPo.Hydro Tractors  
Description  
2690680  
2690681  
2690735  
2690792  
Conquest, 27HP 4WD & 54” Mower  
Conquest, 27HP 4WD & 54” Mower  
Prestige, 27HP 4WD & 50” Mower  
Prestige, 27HP 4WD & 54” Mower  
M54fg. NMoo. wDeersDcreipctikosn  
1695266  
54” Mower Deck  
1735106  
Revision E  
Rev. Date 11/2010  
Table of Contents  
Safety Rules & Information.................................2  
Identification Numbers .......................................7  
Safety Decals.......................................................8  
Safety Icons .........................................................9  
Regular Maintenance........................................18  
Maintenance Schedule..........................................18  
Checking Tire Pressures .......................................18  
Safety Interlock System Check..............................19  
Blade Brake Check................................................19  
Engine Maintenance..............................................19  
Check / Clean Oil Cooler.......................................19  
Battery Maintenance .............................................19  
Features & Controls..........................................10  
Control Functions ..................................................10  
Parking Brake Function .........................................12  
Automatic Controlled Traction...............................12  
Dashboard Display & Functions ............................13  
12 Volt Power Adapter...........................................13  
Troubleshooting & Adjustment........................20  
Troubleshooting the Tractor ..................................20  
Troubleshooting the Mower...................................21  
Battery Charging ...................................................22  
Brake Adjustment..................................................22  
Seat Adjustment....................................................22  
Manual Lift Assist Adjustment ...............................22  
Mower Gauge Wheels...........................................23  
Operating the Tractor........................................14  
Safety Interlock System Tests ...............................14  
General Operating Safety......................................14  
Adding Fuel...........................................................14  
Starting the Engine................................................14  
Stopping the Tractor & Engine...............................14  
Driving the Tractor.................................................15  
Mowing..................................................................15  
Mowing in Reverse................................................15  
Attachment Operation in Reverse .........................15  
Pushing the Tractor by Hand.................................15  
Adjusting Mower Cutting Height ....................16  
Attaching a Trailer .................................................17  
Storage..................................................................17  
Specifications....................................................24  
Parts & Accessories..........................................25  
NOTE: In this manual, “left” and “right” are referred to as  
seen from the operating position.  
1
Safety Rules & Information  
Operating Safety  
Congratulations on purchasing a superior-quality piece of lawn and  
garden equipment. Our products are designed and manufactured to  
meet or exceed all industry standards for safety.  
Power equipment is only as safe as the operator. If it is misused, or  
not properly maintained, it can be dangerous! Remember, you are  
responsible for your safety and that of those around you.  
Use common sense, and think through what you are doing. If you are  
not sure that the task you are about to perform can be safely done  
with the equipment you have chosen, ask a professional: contact  
your local authorized dealer.  
Read the Manual  
The operator’s manual contains important safety information you need to be aware  
of BEFORE you operate your unit as well as DURING operation.  
Safe operating techniques, an explanation of the product’s feates and  
controls, and maintenance information is included to help you he  
most out of your equipment investment.  
Be sure to completely read the Safety Rules and Information found on  
the following pages. Also completely read the Operation section.  
Children  
Reverse  
Tragic accidents can occur with children. Do not allow them  
anywhere near the area of operation. Children are often  
attracted to the unit and mowing activity. Never assume that  
children will remain where you last saw them. If there is a  
risk that children may enter the area where you are mowing,  
have another responsible adult watch them.  
Do not mow in reverse unless  
absolutely necessary. Always look  
down and behind before and  
while traveling in reverse  
even with the mower  
blades disengaged.  
DO NOT GIVE CHILDREN RIDES ON THIS UNIT! This  
encourages them to come near the unit in the future while it  
is running, and they could be seriously hurt. They may then  
approach the unit for a ride when you are not expecting it,  
and you may run over them.  
2
Safety Rules and Information  
Slope Operation  
You could be seriously injured or even killed if you use this unit on too  
steep an incline. Using the unit on a slope that is too steep or where you  
don’t have adequate traction can cause you to lose control or roll over.  
A good rule of thumb is to not operate on any slope you cannot back up  
(in 2-wheel drive mode). You should not operate on inclines with a slope  
greater than a 3.5 foot rise over a 20 foot length. Always drive up and  
down slopes: never cross the face.  
Also note that the surface you are driving on can greatly impact stability  
and control. Wet grass or icy pavement can seriously affect your ability to  
control the unit.  
If you feel unsure about operating the unit on an incline, don’t do it. It’s  
not worth the risk.  
Moving Parts  
This equipment has many moving parts that can injure you or someone else.  
However, if you are seated in the seat properly, and follow the rules in this bo
the unit is safe to operate.  
The mower deck has spinning mower blades that can amputate hands and feet.  
Do not allow anyone near the equipment while it is running!  
To help you, the operator, use this equipment ly, it is equipped with an  
operator-present safety system. Do NOT attemto alter or bypass the system.  
See your dealer immediately if the system does not pass all thsafety interlock  
system tests found in this manual.  
Thrown Objects  
Thiunit has spinning mower blades. These blades can pick up and throw  
debris that could seriously injure a bystander. Be sure to clean up the area to  
be mowed BEFORE you start mowing.  
Do not operate this unit without the entire grass catcher or discharge guard  
(deflector) in place.  
Also, do not allow anyone in the area while the unit is running! If someone  
does enter the area, shut the unit off immediately until they leave.  
Fuel and Maintenance  
Gasoline is extremely flammable. Its vapors are also extremely flammable  
and can travel to distant ignition sources. Gasoline must only be used as a  
fuel, not as a solvent or cleaner. It should never be stored any place where its  
vapors can build up or travel to an ignition source like a pilot light. Fuel  
belongs in an approved, plastic, sealed gas can, or in the tractor fuel tank  
with the cap securely closed. Spilled fuel needs to be cleaned up  
immediately.  
Proper maintenance is critical to the safety and performance of your unit. Be  
sure to perform the maintenance procedures listed in this manual, especially  
periodically testing the safety system.  
3
Safety Rules & Information  
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control  
of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.  
This mowing deck is capable of amputating hands and feet and throwing objects.  
The triangle  
in text signifies important cautions or warnings which must be followed.  
14. Do not operate the unit while under the influence of  
alcohol or drugs.  
GENERAL OPERATION  
1. Read, understand, and follow all instructions in the  
manual and on the unit before starting.  
15 Watch for traffic when operating near or crossing  
roadways.  
2. Do not put hands or feet near rotating parts or under  
the machine. Keep clear of the discharge opening at  
all times.  
16. Use extra care when loading or unloading the unit into  
a trailer or truck.  
17. Always wear eye protection when operating this unit.  
18. Data indicates that operators, age 60 years and  
above, are involved in a large percentage of power  
equipment-related injuries. These operators should  
evaluate their ability to operate the equipment safely  
enough to protect themselves and others from injury.  
19. Follow the manufacturer’s recommendations for wheel  
weights or counterweights.  
3. Only allow responsible adults, who are familiar with  
the instructions, to operate the unit (local regulations  
can restrict operator age).  
4. Clear the area of objects such as rocks, toys, wire,  
etc., which could be picked up and thrown by the  
blade(s).  
5. Be sure the area is clear of other people before  
mowing. Stop the unit if anyone enters the area.  
6. Never carry passengers.  
20. Keep in mind the operator is responsible for accidents  
occurring to other people or property.  
7. Do not mow in reverse unless absolutely necessary.  
Always look down and behind before and while  
travelling in reverse.  
21. All drivers should seek and obtain professional and  
practical instruction.  
22. Always wear substantial footwear and trousers. Never  
perate when bareor wearing sandals.  
2fore using, alwayisually check that the blades  
and blade hardware are present, intact, and secure.  
Replace worn or damaged parts.  
8. Never direct discharge material toward anyone. Avoid  
discharging material against a wall or obstruction.  
Material may ricochet back toward the operator. Stop  
the blade(s) when crossing gravel surfaces.  
9. Do not operate the machine without the entire grass  
catcher, discharge guard (deflector), or other safety  
devices in place.  
24. Disengage attachments before: refueling, removing an  
attachment, making adjustments (unless the  
adjustment can be made from the operator’s position).  
25. When the machine is parked, stored, or left  
tended, lower the cutting means unless a positive  
mhanical lock is used.  
10. Slow down before turning.  
11. Never leave a running unit unattended. Always  
disengage the PTO, set parking brake, stop engine,  
and remove keys before dismounting.  
Before leaving the operator’s position for any reason,  
engage the parking brake (if equipped), disengage the  
PTO, stop the engine, and remove the key.  
27. To reduce fire hazard, keep the unit free of grass,  
leaves, & excess oil. Do not stop or park over dry  
leaves, grass, or combustible materials.  
12. Disengage blades (PTO) when not mowing. Shut off  
engine and wait for all parts to come to a complete  
stop before cleaning the machine, removing the grass  
catcher, or unclogging the discharge guard.  
13. Operate the machine only in daylight or good artific
light.  
TRANSPORTING AND STORAGE  
4. Always follow the engine manual instructions for  
storage preparations before storing the unit for both  
short and long term periods.  
1. When transporting the unit on an open trailer, make  
sure it is facing forward, in the direction of travel. If the  
unit is facing backwards, wind lift could damage the  
unit.  
5. Always follow the engine manual instructions for  
proper start-up procedures when returning the unit to  
service.  
2. Always observe safe refueling and fuel handling  
practices when refueling the unit after transportation  
or storage.  
6. Never store the unit or fuel container inside where  
there is an open flame or pilot light, such as in a water  
heater. Allow unit to cool before storing.  
3. Never store the unit (with fuel) in an enclosed poorly  
ventilated structure. Fuel vapors can travel to an  
ignition source (such as a furnace, water heater, etc.)  
and cause an explosion. Fuel vapor is also toxic to  
humans and animals.  
4
Safety Rules and Information  
SLOPE OPERATION  
WARNING  
Slopes are a major factor related to loss-of-control and tip-over  
accidents, which can result in severe injury or death. Operation  
on all slopes requires extra caution. If you cannot back up the  
slope or if you feel uneasy on it, do not operate on it.  
Never operate on slopes greater than 17.6 percent  
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in  
20 feet (607 cm) horizontally.  
When operating on slopes use additional wheel  
weights or counterweights. See your dealer/retailer to  
determine which weights are available and  
appropriate for your unit.  
Control of a walk-behind or ride-on machine sliding on a  
slope will not be regained by the application of the brake. The  
main reasons for loss of control are: insufficient tire grip on the  
ground, speed too fast, inadequate braking, the type of  
machine is unsuitable for its task, lack of awareness of the  
ground conditions, incorrect hitching and load distribution.  
Select slow ground speed before driving onto slope.  
In addition to front weights, use extra caution when  
operating on slopes with rear-mounted grass  
catchers.  
1. Mow up and down slopes, not across.  
2. Watch for holes, ruts, or bumps. Uneven terrain could  
overturn the unit. Tall grass can hide obstacles.  
3. Choose a slow speed so that you will not have to stop  
or change speeds while on the slope.  
Mow UP and DOWN the slope, never across the  
face, use caution when changing directions and DO  
NOT START OR STOP ON SLOPE.  
4. Do not mow on wet grass. Tires may loose traction.  
5. Always keep unit in gear especially when traveling  
down slopes. Do not shift to neutral and coast  
downhill.  
CHILDREN  
6. Avoid starting, stopping, or turning on a slope. If tires  
lose traction, disengage the blade(s) and proceed  
slowly straight down the slope.  
Tragic accidents can occur if the operator is not alert to the  
presence of children. Children are often attracted to the unit  
and the mowing activity. Never assume that children will  
main where you aw them.  
7. Keep all movement on slopes slow and gradual. Do  
not make sudden changes in speed or direction,  
which could cause the machine to rollover.  
8. Use extra care while operating machines with grass  
catchers or other attachments; they can affect the  
stability of the unit. Do not use on steeps slopes.  
9. Do not try to stabilize the machine by puttiur foot  
on the ground (ride-on units).  
1. Keep children out of the mowing area and under the  
watchful care of another responsible adult.  
2. Be alert and turn unit off if children enter the area.  
3. Before and during reverse operation, look behind and  
down for small children.  
4. Nevecarry children, even with the blade(s) off. They  
may fall off and be seriously injured or interfere with  
afe unit operation. Children who have been given  
rides in the past may suddenly appear in the mowing  
area for another ride and be run over or backed over  
by the machine.  
10. Do not mow near drop-offs, ditches, or embankments.  
The mower could suddenly turn over if a wheel is over  
the edge of a cliff or ditch, or if an edge caves in.  
11. Do not use grass catchers on steep slopes.  
12. Do not mow slopes you cannot back up them.  
13. See your authorized dealer/retailer for  
5. Never allow children to operate the unit.  
6. Use extra care when approaching blind corners,  
shrubs, trees, or other objects that may obscure  
vision.  
recommendations of wheel weights or counteghts  
to improve stability.  
14. Remove obstacles such as rocks, tree lis, etc.  
15. Use slow speed. Tires may lose traion on slopes  
even through the brakes are funing properly.  
16. Do not turn on slopes unless necesary, and then,  
turn slowly and gradually downhill, if possible.  
17. Four Wheel Drive Models: Four Wheel Drive improves  
access to dangerously sloped terrain, increasing the  
possibility of roll-over. If the machine stops while  
going uphill, stop the blades and back down slowly.  
Avoid sudden turns.  
EMISSIONS  
1. Engine exhaust from this product contains chemicals  
known, in certain quantities, to cause cancer, birth  
defects, or other reproductive harm.  
2. Look for the relevant Emissions Durability Period and  
Air Index information on the engine emissions label.  
IGNITION SYSTEM  
1. This spark ignition system complies with Canadian  
ICES-002.  
TOWED EQUIPMENT (RIDE-ON UNITS)  
1. Tow only with a machine that has a hitch designed for  
towing. Do not attach towed equipment except at the  
hitch point.  
2. Follow the manufacturer’s recommendations for weight  
limit for towed equipment and towing on slopes.  
3. Never allow children or others in or on towed equipment.  
4. On slopes, the weight of the towed equipment may  
cause loss of traction and loss of control.  
5. Travel slowly and allow extra distance to stop.  
6. Do not shift to neutral and coast down hill.  
5
Safety Rules & Information  
SERVICE AND MAINTENANCE  
Safe Handling of Gasoline  
1. Extinguish all cigarettes, cigars, pipes, and other  
sources of ignition.  
12. Do not use gasoline containing METHANOL, gasohol  
containing more than 10% ETHANOL, gasoline  
additives, or white gas because engine/fuel system  
damage could result.  
2. Use only approved gasoline containers.  
3. Never remove the gas cap or add fuel with the engine  
running. Allow the engine to cool before refueling.  
4. Never fuel the machine indoors.  
13. If the fuel tank must be drained, it should be drained  
outdoors.  
5. Never store the machine or fuel container where there  
is an open flame, spark, or pilot light such as near a  
water heater or other appliance.  
14. Replace faulty silencers/mufflers.  
15. Maintain or replace safety and instruction labels as  
necessary.  
6. Never fill containers inside a vehicle or on a truck bed  
with a plastic bed liner. Always place containers on  
the ground away from your vehicle before filling.  
7. Remove gas-powered equipment from the truck or  
16. Use only factory authorized replacement parts when  
making repairs.  
17. Always comply with factory specifications on all  
settings and adjustments.  
trailer and refuel it on the ground. If this is not possible, 18. Only authorized service locations should be utilized for  
then refuel such equipment on a trailer with a portable  
container, rather than from a gasoline dispenser  
nozzle.  
major service and repair requirements.  
19. Never attempt to make major repairs on this unit  
unless you have been properly trained. Improper  
service procedures can result in hazardous operation,  
equipment damage and voiding of manufacturer’s  
warranty.  
8. Keep nozzle in contact with the rim of the fuel tank or  
container opening at all times until fueling is complete.  
Do not use a nozzle lock-open device.  
9. If fuel is spilled on clothing, change clothing  
immediately.  
20. On multiple blade mowers, take care as rotating one  
blade can cause other blades to rotate.  
10. Never over-fill the fuel tank. Replace gas cap and  
tighten securely.  
21. Do not change engine governor settings or over-  
peed the engine. rating the engine at excessive  
eed can increashazard of personal injury.  
22. Disengage drive attachments, stop the engine,  
remove the key, and disconnect the spark plug wire(s)  
before: clearing attachment blockages and chutes,  
performing service work, striking an object, or if the  
unit vibrates abnormally. After striking an object,  
inspect the machine for damage and make repairs  
bre restarting and operating the equipment.  
23. Nr place hands near the moving parts, such as a  
hydro pump cooling fan, when the tractor is running.  
Hydro pump cooling fans are typically located on top  
of the transaxle).  
11. Use extra care in handling gasoline and other fuels.  
They are flammable and vapors are explosive.  
12. If fuel is spilled, do not attempt to start the engine but  
move the machine away from the area of spillage and  
avoid creating any source of ignition until fuel vapors  
have dissipated.  
13. Replace all fuel tank caps and fuel container caps  
securely.  
Service & Maintenance  
1. Never run the unit in an enclosed area where carbon  
monoxide fumes may collect.  
24. Units with hydraulic pumps, hoses, or motors:  
WARNING: Hydraulic fluid escaping under pressure  
may have sufficient force to penetrate skin and cause  
serious injury. If foreign fluid is injected into the skin it  
must be surgically removed within a few hours by a  
doctor familiar with this form of injury or gangrene may  
result. Keep body and hands away from pin holes or  
nozzles that eject hydraulic fluid under high pressure.  
Use paper or cardboard, and not hands, to search for  
leaks. Make sure all hydraulic fluid connections are  
tight and all hydraulic hoses and lines are in good  
condition before applying pressure to the system. If  
leaks occur, have the unit serviced immediately by  
your authorized dealer.  
2. Keep nuts and bolts, especially blade attachment  
bolts, tight and keep equipment in good condition
3. Never tamper with safety devices. Check their prop
operation regularly and make necessary reprs if they  
are not functioning properly.  
4. Keep unit free of grass, leaves, or othdebris build-  
up. Clean up oil or fuel spillage. and remove any fuel-  
soaked debris. Allow machine to cool before storage.  
5. If you strike an object, stop and inspect the machine.  
Repair, if necessary, before restarting.  
6. Never make adjustments or repairs with the engine  
running.  
7. Check grass catcher components and the discharge  
guard frequently and replace with manufacturer’s  
recommended parts, when necessary.  
25. WARNING: Stored energy device. Improper release of  
springs can result in serious personal injury. Springs  
should be removed by an authorized technician.  
26. Models equipped with an engine radiator: WARNING:  
Stored energy device. To prevent serious bodily injury  
from hot coolant or steam blow-out, never attempt to  
remove the radiator cap while the engine is running.  
Stop the engine and wait until it is cool. Even then, use  
extreme care when removing the cap.  
8. Mower blades are sharp. Wrap the blade or wear  
gloves, and use extra caution when servicing them.  
9. Check brake operation frequently. Adjust and service  
as required.  
10. Maintain or replace safety and instructions labels, as  
necessary.  
11. Do not remove the fuel filter when the engine is hot as  
spilled gasoline may ignite. Do not spread fuel line  
clamps further than necessary. Ensure clamps grip  
hoses firmly over the filter after installation.  
6
Identification Numbers  
Identification Numbers  
When contacting your authorized dealer for  
replacement parts, service, or information you MUST  
have these numbers.  
CE Identification Tag  
A. Manufacturer’s Identification Number  
B. Manufacturer’s Serial Number  
C. Power Rating in Kilowatts  
Record your model name/number, manufacturer’s  
identification numbers, and engine serial numbers in the  
space provided for easy access. These numbers can be  
found in the locations shown.  
D. Maximum Engine Speed in Rotations per Minute  
E. Manufacturer’s Name and Address  
F. Year of Manufacture  
NOTE: For location of engine identification numbers, refer  
G. CE Compliance Logo  
to the engine owner’s manual.  
H. Mass of Unit in Kilograms  
I. Guaranteed Sound Power in Decibels  
A
Part No. xxxxxxx  
I
xxxxxxxxxx  
B
Serial No. xxxxxxx  
H
xxx  
dB  
xxxxxxxxxxxxxxxxxxxxxxx  
xxxxxxxxxxxxxxxxxxxxxxx  
xxxxxxxxxxxxxxxxxxxxxxx  
xxxxxxxxxxxxxxxxxxxxxxx  
kg: xxx  
C
E
Mower ID Tag  
Tractor ID Tag  
kW: x.xx  
xxxx max  
20xx  
D
F
G
PRODUCT REFERENCE DATA  
Model Description Name/Number  
Unit Mfg Number  
Unit Serial Number  
Mower Deck Mfg Number  
Mower DecNumber  
Date Purchased  
Dealer Name  
ENGINE REFERENCE DATA  
Engine Make  
Engine Model  
Engine Type/Spec  
Engine Code/Serial Number  
7
Safety Decals  
Safety Decals  
All DANGER, WARNING, CAUTION and instructional  
messages on your rider and mower should be carefully  
read and obeyed. Personal bodily injury can result when  
these instructions are not followed. The information is for  
your safety and it is important! The safety decals below  
are on your rider and mower.  
This unit has been designed and manufactured to provide  
you with the safety and reliability you would expect from  
an industry leader in outdoor power equipment  
manufacturing.  
Although reading this manual and the safety instructions it  
contains will provide you with the necessary basic  
knowledge to operate this equipment safely and  
effectively, we have placed several safety labels on the  
unit to remind you of this important information while you  
are operating your unit.  
If any of these decals are lost or damaged, replace them  
at once. See your local dealer for replacements.  
These labels are easily applied and will act as a constant  
visual reminder to you, and others who may use the  
equipment, to follow the safety instructions necessary for  
safe, effective operation.  
Safety Icons  
Warning: Read Operator’s Manual.  
Danger: Dismembermen.  
Ths mower deck can aputate  
liKeep hands and t away  
from blades.  
Read and understand the Operator’s  
Manual before using this machine.  
Danger: Thrown Objects.  
This machine is capable of throwing  
objects and debris. Keep bystanders  
away.  
Danger: Fire Hazard.  
Do not add fuel while engine is hot or  
run. Stop engine and allow to  
cool f3 minutes prior to adding fuel.  
Warning: Remove Key Before  
Servicing.  
Remove the key and consult technical  
literature before performing repairs or  
maintenance.  
Danger: Hot Surface.  
Allow machine to cool before  
touching this area.  
Danger: Carbon Monoxide  
Poisoning.  
Danger: Machine Rollover.  
Do not use this machine on slopes  
Do not operate the engine in an  
greater than 10°.  
unventilated area.  
Danger: Dismemberment.  
This machine can amputate limbs.  
Keep bystanders and children away  
when engine is running.  
8
CE Safety Icons  
Operating Instructions,  
Decals Locations  
CE Models, Part No. 1734027  
Ignition Switch  
Positions  
Part No. 1722806  
CE-Danger, Rotating Blades,  
Part No. 1720389  
CE-Danger, Rotating Blades,  
Part No. 1720389  
Decal - Cutting  
Height  
Part No. 1721197  
1730264  
Decal - Cutting  
Height  
Part No. 1723470  
173xxxx  
1730172  
Transmission  
Release  
Fuel Level  
Attachment Lift  
Part No. 1730264  
Decal - Cutting  
Height  
Part No. 1730172  
Part No. 1730202  
Part No. 1723847  
9
Features & Controls  
Electric  
Hydraulic  
Lift  
HOC Models  
Models  
Manual  
Lift Models  
Manual  
HOC Models  
12V  
Figure 1. Controls  
Control Functions  
The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing  
require the combined use of several controls applied in specific sequences. To learn what combination and sequence  
of controls to use for various tasks see the OPERATION section.  
Throttle Control  
Headlights  
The throttle controls engine speed. Move the throttle  
forward to increase engine speed and back to decrease  
engine speed. Always operate at FULL throttle.  
The light switch turns the tractor headlights on and off.  
Reverse Mowing Option (RMO)  
The Reverse Mowing Option allows for mowing (or use of  
other PTO driven attachments) while traveling in reverse.  
If you choose to mow or operate another attachment in  
reverse, turn the RMO key after the PTO is engaged. The  
L.E.D. light will illuminate, and the operator can then mow  
in reverse. Each time the PTO is disengaged the RMO  
needs to be reactivated if desired.  
Choke  
Close the choke for cold starting. Open the choke once  
the engine starts. A warm engine may not require  
choking. Move the lever forward to close the choke.  
10  
Features & Controls  
Manual Lift Models: The cutting height adjustment knob  
controls the mower cutting height.  
PTO Switch  
The PTO (Power Take-Off) switch engages and  
disengages attachments that use the PTO. To engage  
the PTO, pull UP on the switch. Push DOWN to  
disengage. Note that the operator must be seated firmly  
in the tractor seat for the PTO to function.  
Cruise Control (Select Models)  
The cruise control is used to lock the ground speed  
control in forward. Move the lever forward until the  
desired ground speed is reached. To disengage the  
cruise control move the lever back. In the event you need  
to stop quickly, depressing the brake pedal will also  
return the cruise control to neutral.  
Ignition Switch  
The ignition switch starts and stops the engine, it has  
three positions:  
Seat Adjustment Lever  
OFF  
Stops the engine and shuts off the  
electrical system.  
The seat can be adjusted forward and back. Move the  
lever, position the seat as desired, and release the lever  
to lock the seat into position.  
RUN  
Allows the engine to run and powers the  
electrical system.  
Transmission Release Valve Lever  
START  
Cranks the engine for starting.  
The transmission release valve lever deactivates the  
transmission so that the tractor can be pushed by hand.  
See PUSHING THE TRACTOR BY HAND.  
NOTE: Never leave the ignition switch in the RUN  
position with the engine stopped–this drains the battery.  
Brake Pedal  
Transmission Oil Expansion Chamber  
(K71 Models Only)  
Depressing the brake pedal applies the tractor brake.  
Transmission oil is added through the transmission oil  
expansion chamber. It also serves as extra holding  
acity for oil as the transmission heats up and the oil  
eands. See your dealer for oil check/ fill procedures.  
Ground Speed Pedals  
The tractor’s forward ground speed is controlled by the  
forward ground speed control pedal. The tractor’s revers
ground speed is controlled by the reverse ground speed  
control pedal.  
Fuel Tank  
To remove the cap, turn counterclockwise. On models  
with a dashboard display, the fuel gauge is part of the  
dashboard. Models without a dashboard display have a  
fuel gauge located under the seat.  
Depressing either pedal will increase ground speNote  
that the further down the pedal is depressed, the faer  
the tractor will travel.  
Parking Brake  
12V  
Power Outlet (Select Models)  
The parking brake knob is used to lock the parking brake  
when the tractor is stopped. Fully depressing the brake  
pedal and pulling up on the knob engages the parking brake  
The power outlet is 12V-DC. Accessory must be rated at  
14 amps or less.  
Differential Lock Pedal (Select Models)  
Mower Height of Cut Adjustment  
Depressing this pedal locks the transmission differential,  
The cutting height is infinitely adjustable between 1” and  
3-5/8.”  
locking both rear wheels into “drive”.  
Use this feature if the tractor is stuck because one wheel  
is slipping. Engage the differential lock at slow  
ground speeds only.  
Electric Height of Cut Models: The cutting height  
adjustment switch controls the mower cutting height. This  
same switch also controls the spout rotator motor when a  
snowthrower is installed. The arrows on the switch  
correspond to the direction of adjustment (UP arrow  
raises cutting height, RIGHT arrow rotates the spout right,  
etc). When the adjustment indicator has reached the end  
of its travel, release the switch; holding the switch down  
will damage the motor.  
Steering Tilt Adjust (Select Models)  
Use the tilt knob located on the bellows to release the  
pivot mechanism and pivot the wheel to the desired  
position. Release the tilt knob to lock in position.  
11  
Features & Controls  
Manual Lift Models: The attachment lift control lever  
raises and lowers attachments that utilize the tractor’s  
manual lift linkage. To lower an attachment: pull the lever  
back slightly, depress the release button, and push the  
lever forward until it locks in the lowered position. To raise  
an attachment: push the lever forward slightly, depress  
the release button, then pull the lever back until it locks in  
the raised position.  
Attachment Lift Control Lever  
When using the mower deck, lift the deck off the ground  
while transporting to and from the job site. DO NOT cut  
with the mower in the raised, transport position.  
Hydraulic Lift Models: The attachment lift control lever  
raises and lowers attachments that utilize the tractor’s  
hydraulic lift cylinder. Pushing the lever forward lowers  
the attachment while pulling the lever back raises the  
attachment.  
IMPORTANT NOTE - On models equipped with hydraulic  
lift, the attachment lift will not work when the parking  
brake is engaged.  
Parking Brake Function  
Applying the Parking Brake - See Figure 2. To lock the  
parking brake, release the ground speed pedals (A), fully  
depress the brake pedal (B), pull UP on the parking brake  
knob (C), and then release brake pedal.  
Releasing the Parking Brake - See Figure 2. To release  
the parking brake, fully depress the brake pedal (B) and  
push the parking brake knob (C) DOWN.  
IMPORTANT NOTE: The tractor’s hydraulic attachment  
B
A
lift will not work when the parking brake is engaged.  
Figure 2. Engaging the Parking Brake  
A. Ground Speed Pedals  
B. Brake Pedal  
C. Parking Brake Knob  
What to Expect from Your ACT Tractor  
Automatic Controlled Traction  
(w/o 4WD)  
For the most part, while using your tractor you will not  
notice ACT working, and you will simply become  
accustomed to increased traction an ACT transmission  
provides.  
What is Automatic Controlled Traction?  
Automatic Controlled Traction (ACT) is an exclusive feature  
of our transmissions that provides improved traction. ACT  
applies a preset amount of torque to both rear wheels even  
if one starts slipping (a transmission without ACT will lose  
traction completely if one rear wheel starts slipping). This  
preset torque is just enough to provide additional traction,  
and still allow the wheels to turn at different speeds in a tight  
turn without damaging the lawn.  
Under certain circumstances the ACT system limit can be  
exceeded, and one of the rear wheels may slip (for  
instance if trying to turn up a hill while accelerating). This  
is normal. If you start to lose traction, do not speed up.  
Instead, slow to a stop, straighten the steering wheel, and  
slowly accelerate. Stopping the tractor allows the  
transmission to regain more traction.  
12  
Features & Controls  
Dashboard Display & Functions  
A
B
Display Items  
Refer to Figure 3.  
A. FUEL LEVEL  
D
C
Indicates the amount of fuel in the fuel tank. Left is empty;  
right is full.  
B. HOUR METER / CLOCK / SERVICE INDICATOR  
Displays the clock, hour meter, and maintenance reminder.  
F
E
H
G
The hour meter measures the number of hours the key  
has been in the RUN position. The hour meter will flash  
an initial oil change indicator at 5 hours, and a lubrication  
reminder every 50 hours. These reminders display for  
approximately two hours and will automatically reset  
themselves.  
Figure 3. Dashboard Display - Select Models  
Functions  
DASHBOARD DISPLAY MODELS  
Display Total Running Hours - When the key switch is  
first turned to the RUN position, all warning indicators will  
light and the total running hours will be displayed. Be sure  
all lights are functioning.  
NOTE: The hour meter will register the passage of time  
when the key is in the RUN position, even if the engine is  
not running. The hour meter has a self contained power  
source so the total hours are always visible.  
Display PTO Hours - Turn the key OFF, engage the  
C. SELECT BUTTON  
PTO, and turn the key to RUN (engine off).  
Used to set the clock and reset the maintenance reminder.  
et the Clock - She engine, leave the engine  
running. Depress the select button (C) for three (3)  
seconds and release. Depress set button and HOLD to  
advance time. Depress select button to select minutes.  
Depress and HOLD set button (D) to advance time.  
Leave alone for 5 seconds and clock will activate. Shut off  
engine.  
D. SET BUTTON  
Used to set the clock and reset the maintenance reminder.  
E. PTO LIGHT  
Indicates the PTO switch is in the ON position.  
F. CRUISE CONTROL LIGHT  
onstration Mode - With the engine off, hold down  
Indicates that the cruise control is engaged.  
G. LOW OIL PRESSURE LIGHT  
the set button (D) and turn the key switch to RUN.  
Maintenance Reminder - A maintenance reminder will  
display in the information window (B) after the first 5 hours  
of operation, and then after every 50 hours. The reminder  
will automatically reset after 5 hours. The reminder can be  
manually reset by turning the key switch from OFF to RUN  
(with engine off) and then depressing the set (D) and  
select (C) buttons simultaneously for 5 seconds.  
Indicates that the engine oil pressure is low. The light will  
turn on when the tractor is first started and then gt. IF  
THIS LIGHT TURNS ON WHILE THE TRACTOR IN  
USE, TURN THE ENGINE OFF IMMEDIATY. Contact  
your authorized dealer for service.  
H. LOW VOLTAGE LIGHT  
Indicates that the electrical system voltage is low. The light  
will turn on when the tractor is first started and then go out. IF  
THIS LIGHT TURNS ON WHILE THE TRACTOR IS IN  
USE, TURN THE ENGINE OFF IMMEDIATELY. Contact  
your authorized dealer for service.  
The 12-volt accessory plug is located in the left side pod  
(see Figure 1). It can be used to power small electronic  
devices. The accessory must be rated at 14 amps or less.  
12 Volt Power Outlet  
(Select Models)  
NOTE: Operating a 12-volt accessory, especially with the  
engine at idle, may cause battery discharge. When not  
using the accessory plug it must be covered with the rubber  
plug to prevent moisture from causing a short circuit.  
Entrance of water into plug can cause a short circuit.  
CAUTION  
Avoid Injury. Safe operation requires your full  
attention. Do not wear radio or music  
headphones while operating machine.  
13  
Operating the Tractor  
Safety Interlock System Tests  
WARNING  
Gasoline is highly flammable and must be  
handled with care. Never fill the tank when the  
engine is still hot from recent operation. Do not  
allow open flame, smoking or matches in the  
area. Avoid over-filling and wipe up any spills.  
WARNING  
This unit is equipped with safety interlock  
switches and other safety devices. These safety  
systems are present for your safety. Do not  
attempt to bypass safety switches, and never  
tamper with safety devices.  
Do not use gasoline containing METHANOL,  
gasohol containing more than  
Test 1 — Engine should NOT start if:  
10% ETHANOL, gasoline additives, or white  
gas because engine/fuel system damage  
could result.  
• Blade rotation control is in the ENGAGE position, OR  
• Brake pedal is NOT fully depressed (parking brake  
OFF).  
Test 2 — Engine SHOULD start if:  
Starting The Engine  
• Operator is sitting in seat, AND  
1. While sitting in the operator’s seat, fully depress the  
brake pedal or set the parking brake.  
• Blade rotation control is in the DISENGAGE position,  
AND  
ake sure that yot are not depressing the  
ground speed control pedals and that the cruise  
control lever is in neutral.  
• Brake pedal is fully depressed (parking brake ON).  
Test 3 — Engine should SHUT OFF if:  
• Operator rises off seat.  
3. Disengage the PTO clutch.  
4. Set the throttle to FULL.  
5. Close the choke.  
Test 4 — Blade Brake Check  
NOTA warm engine may not require choking.  
6. It the ignition key and turn it to START.  
After the engine starts, move the engine throttle  
control to half speed. Warm up the engine by running  
it for at least 30 seconds.  
Mower blades and mower drive belt should come to a  
complete stop within five seconds after blade rotation control  
is moved to DISENGAGE position. If the mower drive belt  
does not stopWwithAin fRiveNsecIoNndGs, see your dealer.  
8. Set throttle to FULL.  
NOTE: In the event of an emergency the engine can be  
stopped by simply turning the ignition switch to STOP.  
Use this method only in emergency situations. For normal  
engine shut down follow the procedure given in  
STOPPING THE TRACTOR.  
If the unit does not pass a safety test, do not  
operate it. See your authorized dealer.  
General Operating Safety  
Stopping The Tractor & Engine  
1. Return the ground speed control(s) to neutral.  
2. Disengage the PTO and wait for all moving parts to stop.  
Be sure to read all information in the Safety and  
Operation sections before attempting to operate this unit.  
Become familiar with all of the controls and how to stop  
the unit.  
3. Briggs & Stratton Models: Move the throttle control to  
SLOW position and turn the ignition key to OFF. Remove  
the key.  
Adding Fuel  
Kohler Models: Move the throttle control to FAST  
position and turn the ignition key to OFF. Remove  
the key.  
To add fuel:  
1. Remove the fuel cap (A, Figure 4).  
2. Fill the tank. Do not overfill. Leave room in the tank for  
fuel expansion. Refer to your engine manual for  
specific fuel recommendations.  
3. Install and hand tighten the fuel cap.  
14  
Operating the Tractor  
Attachment Operation in Reverse  
Driving The Tractor  
1. Sit in the seat and adjust the seat so that you can  
comfortably reach all the controls and see the  
dashboard display.  
If an operator chooses to operate a PTO driven  
attachment in reverse, the RMO system can be used. To  
use the Reverse Mowing Option (RMO) turn the RMO key  
after the PTO is engaged. The L.E.D. light will illuminate,  
and the operator can then operate the attachment in  
reverse. Each time the PTO is disengaged the RMO  
needs to be reactivated if desired. The key should be  
removed to restrict access to the RMO feature.  
2. Engage the parking brake.  
3. Make sure the PTO switch is disengaged.  
4. Start the engine (see STARTING THE ENGINE).  
5. Disengage the parking brake and release the  
brake pedal.  
6. Depress the forward ground speed control pedal to travel  
forward. Release the pedal to stop. Note that the further  
down the pedal is depressed the faster the tractor  
will travel.  
Pushing the Tractor by Hand  
7. Stop the tractor by releasing the ground speed control  
pedals, setting the parking brake, and stopping the  
engine (see STOPPING THE TRACTOR & ENGINE).  
1. Disengage the PTO and turn the engine off.  
2. Pull the transmission release (B, Figure 4) back  
approximately 2-1/2” (6 cm) to lock into released position.  
Mowing  
3. The tractor can now be pushed by hand.  
1. Set the mower cutting height to the desired level and set  
the gauge wheels to the appropriate position  
(if equipped).  
DO NOT TOW TRACTOR  
2. Engage the parking brake. Make sure the PTO switch  
is disengaged.  
Towing the unit will cause transmission  
damage. • Do not use another vehicle to  
push or pull this unit. • Do not actuate the  
transmin release valve lever while the  
engine is unning.  
3. Start the engine (see STARTING THE ENGINE).  
4. Fully lower the mower using the attachment lift lever and  
set cutting height.  
5. Set the throttle to FULL.  
6. Engage the PTO (Mower Deck).  
7. Begin mowing.  
8. When finished, shut off the PTO and raise the mower  
using the attachment lift control lever.  
9. Stop the engine (see STOPPING THE TRACT
& ENGINE).  
MowingWinAReRvNerIsNeG  
The engine will shut off if the reverse groun
speed pedal is depressed while the PTO is o
and the RMO has not been activated. T
operator should always turn the PO ofprior to  
driving across on roads, paths ny area that  
maybe used by other vehicles. Sdden loss of  
drive could create a hazard.  
A
WARNING  
B
Mowing in reverse can be hazardous to  
bystanders. Tragic accidents can occur if the  
operator is not alert to the presence of children.  
Never activate RMO if children are present.  
Children are often attracted to the unit and the  
mowing activity.  
Figure 4. Transmission Release Lever & Fuel Tank  
A. Fuel Tank Cap  
B. Transmission Release Lever  
If an operator chooses to mow in reverse, the RMO  
system can be used. To use the Reverse Mowing Option  
(RMO) turn the RMO key after the PTO is engaged. The  
L.E.D. light will illuminate, and the operator can then mow  
in reverse. Each time the PTO is engaged the RMO  
needs to be reactivated if desired. The key should be  
removed to restrict access to the RMO feature.  
15  
Operating the Tractor  
Adjusting Mower Cutting Height  
The cutting height is infinitely adjustable between  
approximately 1” and 3-5/8” (2,5-9,2 cm).  
Electric Height of Cut Models: The cutting height  
adjustment switch (D, Figure 5) controls the mower  
cutting height. This same switch also controls the spout  
rotator motor when a snowthrower is installed. The  
arrows on the switch correspond to the direction of  
adjustment (UP arrow raises cutting height, RIGHT arrow  
rotates the spout right, etc). When the adjustment  
indicator has reached the end of its travel, release the  
switch; holding the switch down will damage the motor  
Manual Lift Models: The cutting height adjustment knob  
(B, Figure 5) controls the mower cutting height. Turn the  
knob clockwise to raise the deck and counterclockwise to  
lower it.  
D
B
C
A
Figure 5. Raising and Lowering Mow
A. Attachment Lift - Manual  
B. Cutting Height Control Knob  
C. Attachment Lift - Hydraulic  
D. Electric Height of Cut Switch  
16  
Operating the Tractor  
Attaching a Trailer  
StorageWARNING  
The maximum horizontal drawbar force allowed is  
444 Newton. The maximum vertical drawbar force is  
222 Newton. This equates to a 396 lbs (180 kg) trailer on  
a 10 degree hill. Secure the trailer with an appropriately  
sized clevis pin (A, Figure 6) and clip (B).  
Never store the unit (with fuel) in an enclosed,  
poorly ventilated structure. Fuel vapors can  
travel to an ignition source (such as a furnace,  
water heater, etc.) and cause an explosion.  
Fuel vapor is also toxic to humans and animals.  
A
Before you store your unit for the off-season, read the  
Maintenance and Storage instructions in the Safety Rules  
section, then perform the following steps:  
B
• Disengage the PTO, set the parking brake, & remove  
the key.  
• Perform engine maintenance and storage measures  
listed in the engine owner’s manual. This includes  
draining the fuel system, or adding stabilizer to the  
fuel (do not store a fueled unit in an enclosed structure  
- see warning).  
• Battery life will be increased if it is removed, put in a  
cool, dry place and fully charged about once a month.  
If the battery is in the unit, disconnect the negative  
cable.  
Figure 6. Trailer Weight Recommendations  
Before starting the unit after it has been stored:  
A. Clevis Pin  
B. Clip  
• Check all fluid levels. Check all maintenance items.  
• Perform all recommended checks and procedures  
found in the engine owner’s manual.  
Allow the engine to warm up for several minutes  
before use.  
17  
Regular  
Maintenance  
MAINTENANCE SCHEDULE & PROCEDURES  
The following schedule should be followed for normal care of your tractor and mower.  
TRACTOR AND MOWER  
Every 8 Hours or Daily  
ENGINE  
First 5 Hours  
Check safety interlock system  
Clean debris off tractor and mower deck  
Clean debris from engine compartment  
Every 25 Hours or Annually *  
Check mower blade stopping time  
Check tractor and mower for loose hardware  
Check tire pressure  
Change engine oil - see engine manual  
Every 8 Hours or Daily  
Check engine oil level - see engine manual  
Every 25 Hours or Annually *  
Clean engine air filter and pre-cleaner **  
Every 50 Hours or Annually *  
Change engine oil  
Replace oil filter  
Every 50 Hours or Annually *  
Check tractor brakes  
ually  
Replace air filter  
Clean battery and cables  
Replace pre-cleaner  
See Dealer Annually to  
See Dealer Annually to  
Inspect muffler and spark arrester  
Race spark plug  
Lubricate tractor and mower  
Check mower blades **  
* Whichever comes first  
Replace fuel filter  
** Check blades more often in regions with sandy soils or  
high dust conditions.  
lean engine air cooling system  
* Whichever comes first  
** Clean more often in dusty conditions or when airborne  
debris is present.  
Check Tire Pressures  
Tire Pressure should be checked periodically, and  
maintained at the levels shown in the chart (Figure 7).  
Note that these pressures may differ slightly from the  
“Max Inflation” stamped on the side-wall of the tires. The  
pressures shown provide proper traction, improve cut  
quality, and extend tire life.  
Size  
PSI  
10  
10  
bar  
0,68  
0,68  
22 x 10,0-8  
20 x 8,0-8  
15 x 6,0-6  
12-14  
0,82-0,96  
Figure 7. Tire Pressure  
18  
Regular Maintenance  
Safety Interlock System Check  
Battery Maintenance  
Check the function of the safety interlock system using  
the test procedure in Operating the Tractor. If the tractor  
fails any of the tests, see your dealer.  
Cleaning WtheABRattNerIyNaGnd Cables  
When removing or installing battery cables,  
disconnect the negative cable FIRST and reconnect  
it LAST. If not done in this order, the positive  
terminal can be shorted to the frame by a tool.  
Blade Brake Check  
Mower blades and mower drive belt should come to a  
complete stop within five seconds after the electric PTO  
switch is turned off.  
1. Disconnect the cables from the battery, negative  
cables first (A, Figure 9) then the cover & positive  
cables (B).  
1. With tractor in neutral, PTO disengaged and operator  
in seat, start the engine.  
2. Look over the left-hand footrest at the mower drive  
belt. Engage the PTO and wait several seconds.  
Disengage the PTO and check the amount of time it  
takes for the mower drive belt to stop.  
2. Loosen the wingnut & washer (D).  
3. Pivot the hold-down rod (C) up and away from battery.  
Secure to steering tower.  
4. Remove the battery (E).  
3. If mower drive belt does not stop within five seconds,  
see your dealer.  
5. Clean the battery compartment with a solution of  
baking soda and water.  
Engine Maintenance  
6. Clean the battery terminals and cable ends with a wire  
brush and battery terminal cleaner until shiny.  
Refer to the engine owner’s manual for all engine  
maintenance procedures and recommendations.  
. Reinstall the by (E) in the battery compartment.  
Secure with the battery hold-down rod (C) and  
wingnut & washer (D).  
Check / Clean Oil Cooler  
(Kohler Models)  
8. Re-attach the battery cables, positive cables and  
cover first (B) then the negative cables (A).  
The engine oil cooler is located on the side of ngine  
(A, Figure 8) and should be cleaned with compressed air  
at regular intervals or if dirty.  
9. Coat the cable ends and battery terminals with  
petroleum jelly or non-conducting grease.  
A
D
A
B
C
E
Figure 8. Clean Oil Cooler  
A. Oil Cooler  
Figure 9. Battery Maintenance  
A. Negative Cables  
B. Positive Cables & Cover  
C. Hold-Down Rod  
D. Wingnut & Washer  
E. Battery  
19  
Troubleshooting &  
Adjustment  
Troubleshooting  
WARNING  
While normal care and regular maintenance will extend  
the life of your equipment, prolonged or constant use may  
eventually require that service be performed to allow it to  
continue operating properly.  
To avoid serious injury, perform maintenance on  
the tractor or mower only when the engine is  
stopped and the parking brake engaged.  
Always remove the ignition key, disconnect the  
spark plug wire and fasten it away from the plug  
before beginning the maintenance, to prevent  
accidental starting of the engine.  
The troubleshooting guide below lists the most common  
problems, their causes, and remedies.  
See the information on the following pages for  
instructions on how to perform most of these minor  
adjustments and service repairs yourself. If you prefer, all  
of these procedures can be performed for you by your  
local authorized dealer.  
Troubleshooting the Tractor  
PROBLEM  
LOOK FOR  
REMEDY  
Brake pedal not depressed.  
Fully depress brake pedal.  
PTO (electric clutch) switch is in ON position.  
Cruise control engaged.  
Place in OFF position.  
Move knob to NEUTRAL/OFF position.  
If engine is hot, allow it to cool, then refill  
Out of fuel.  
the fuel tank.  
Engine flooded.  
Disengage the choke.  
Fuse is blown.  
See authorized dealer.  
Engine will not  
Battery terminals require cleaning.  
Battery discharged or dea
See Cleaning the Battery and Cables.  
Recharge or replace battery.  
turnover or start.  
Visually check wiring. If wires are frayed or  
Wiring loose or brok
broken, see authorized dealer.  
Solenoid or ser motor faulty.  
Safety interlock switch faulty.  
Water in fuel.  
See authorized dealer.  
See authorized dealer.  
See authorized dealer.  
See authorized dealer.  
Clean air filter.  
Gas is old or stale.  
Fuel mixture too rich.  
Engine has other problem.  
Low oil level.  
Engine starts hard or  
runs poorly.  
See authorized dealer.  
See engine manual.  
See engine manual.  
See authorized dealer.  
See engine manual.  
Drain excess oil.  
Engine knocks.  
Using wrong grade oil.  
Engine running too hot.  
Using wrong grade oil.  
Too much oil in crankcase.  
Excessive oil  
consumption.  
20  
Troubleshooting & Adjustment  
Troubleshooting the Tractor (Continued)  
PROBLEM  
LOOK FOR  
REMEDY  
See authorized dealer.  
See authorized dealer.  
See Check Tire Pressure section.  
See authorized dealer.  
See engine manual.  
Brake will not hold.  
Internal brake worn.  
Steering linkage is loose.  
Tractor steers hard or  
handles poorly.  
Improper tire inflation.  
Front wheel spindle bearings dry.  
Dirty air filter.  
Engine exhaust is  
black.  
Choke closed.  
Open choke.  
Ground speed control pedals not depressed.  
Transmission release lever in PUSH position.  
Mower drive belt is broken.  
Parking brake is engaged.  
Depress pedals.  
Move into DRIVE position.  
See authorized dealer.  
Disengage parking brake.  
See authorized dealer.  
Engine runs, but  
tractor will not drive.  
Traction drive belt is broken or slipping.  
Troubleshooting the Mower  
PROBLEM  
LOOK FOR  
REMEDY  
See authorized dealer.  
See authorized dealer.  
See Check Tire Pressure.  
Set to full throttle.  
Mower will not raise. Lift linkage not properly attached or damaged.  
Mower not leveled properly.  
Mower cut is uneven.  
Tractor tires not proinflated.  
Engine speed too slow.  
Mower cut is rough  
Ground speed too fast.  
looking.  
Slow down.  
Mower has other problem.  
Engine speed too slow.  
Ground speed to fast.  
See authorized dealer.  
Set to full throttle.  
Slow down.  
Dirty or clogged air filte
See engine manual.  
Cut tall grass at maximum cutting height  
Cutting height set oo low.  
Engine stalls easily  
during first pass.  
with mower engaged.  
Cut grass with discharge pointing toward  
previously cut area.  
Discharge chute jamming.  
Engine not up to operating temperature.  
Starting mower in tall grass.  
Run engine for several minutes to warm-up.  
Start the mower in a cleared area.  
Excessive mower  
vibration.  
Mower has other problem.  
See authorized dealer.  
Engine runs and  
PTO not engaged.  
Mower has other problem.  
Engage the PTO.  
See authorized dealer.  
tractor drives, but  
mower will not drive.  
21  
Troubleshooting & Adjustment  
Battery Charging  
C
WARNING  
A
Keep open flames and sparks away from the  
battery; the gasses coming from it are highly  
explosive. Ventilate the battery well during  
charging.  
A dead battery or one too weak to start the engine may be  
the result of a defect in the charging system or other  
electrical component. If there is any doubt about the  
cause of the problem, see your dealer. If you need to  
replace the battery, follow the steps under Cleaning the  
Battery & Cables.  
To charge the battery, follow the instructions provided by  
the battery charger manufacturer as well as all warnings  
included in the safety rules sections of this book. Charge  
the battery until fully charged. Do not charge at a rate  
higher than 10 amps.  
B
Brake Adjustment  
Figure 10. Seat Adjument  
Aat Adjustment er  
B. Carriage Bolt, Spacer, Washer, and Nut  
C. Seat Spring  
This unit does not have a user-adjustable brake. If brake  
does not function properly, see your dealer.  
Seat Adjustment  
Pitch Adjustment  
The pitch of the seat can be adjusted to one of three  
positions. To adjust, remove the carriage bolts, spacers,  
washers, and nuts (B, Figure 10) from the hinge and  
reinstall them in the desired holes.  
Seat Slide Adjustment  
The seat can also be adjusted forward and back. Mo
the lever (A, Figure 10), position the seat as desird, an
release the lever to lock the seat into position.  
Seat Spring Adjustment  
The seat springs (C, Figure 10) can be adjusted to  
provide a softer or firmer ride. Tilt the seat forward and  
slide the spring assembly (C) forward for a softer ride,  
and back for a firmer ride.  
Manual Lift Assist Adjustment  
Models with large, left-side lift lever. If the manual lift does  
not function properly, see your dealer.  
22  
Troubleshooting & Adjustment  
Mower Gauge Wheels (Select Models)  
A
The mower gauge wheels can be placed in several  
positions depending on the height of cut. When using  
higher cutting heights, set the wheels in the lower  
position. When using lower cutting heights, set the  
wheels in the upper position. To adjust:  
B
C
PIVOTING GAUGE WHEELS  
1. Remove the hair pin clip (A, B, Figure 11).  
Figure 11. Pivoting Gauge Wheel Adjustment  
A. Hair Pin (Upper Position)  
2. For upper position, install the pin (A) through the  
spindle above the bracket (C). For the lower position,  
push down on the top of the spindle, and install the  
hair pin clip (B) below the top of the bracket (C).  
B. Hair Pin (Lower Position)  
C. Gauge Wheel Bracket  
SLIDING BRACKET GAUGE WHEELS  
1. Remove the nylock wing nut (A, Figure 12) from  
capscrew (C). Slide out capscrew (C) from gauge  
wheel bracket (B). Change position of gauge wheel  
assembly to desired height.  
A
B
2. Insert capscrew (C) through gauge wheel bracket (B)  
and gauge wheel assembly (D). Tighten nylock wing  
nut (A). Repeat Steps 1 & 2 for all gauge wheels.  
FIXED BRACKET GAUGE WHEELS  
C
1. Remove the locknut (B, Figure 13), gauge wheel (C),  
washers (D), and shoulder bolt (E). Change position  
of gauge wheel to desired height.  
D
2. Insert shoulder bolt (E) through washers (Duge  
wheel (C), and gauge wheel bracket (A). Secure with  
locknut (B). Repeat Steps 1 & 2 for all gauge wheels.  
Figure 12. Sliding Bracket Gauge Wheel Adjustment  
A. Nylock Wing Nut  
C. Capscrew  
B. Gauge Wheel Bracket  
D. Gauge Wheel  
A
B
D
E
C
Figure 13. Fixed Bracket Gauge Wheel Adjustment  
A. Gauge Wheel Bracket  
B. Locknut  
D. Washers  
E. Shoulder Bolt  
C. Gauge Wheel  
23  
Specifications  
K66 TRANSMISSION  
ENGINE  
Type  
Hydrostatic Tuff Torq K66  
23 HP* Briggs & Stratton  
Hydraulic Fluid  
10w 30 Premium Engine Oil  
Make  
Briggs & Stratton  
Twin Vanguard (386777)  
23  
Capacity  
2.6 qt (2,5 L)  
Model  
Speeds  
Forward: 0-5.8 MPH (9.3 km/h)  
Reverse: 0-3.5 MPH (5.6 km/h)  
310 ft-lbs (419 Nm)  
Horsepower  
Displacement  
Electrical System  
@ 3400 rpm  
Continuous Torque  
Output  
38 cu in. (622 cc)  
Alternator: 12 volt, 16 amp  
Battery: 340 CCA  
48 oz (1.4 L)  
Drawbar Rating  
Maximum Weight  
on Axle  
440 lbs (200 Kg)  
697 lbs (316 Kg)  
Oil Capacity  
25 HP* Kohler  
Make  
Kohler  
K664 TRANSMISSION  
Model  
Command (CV730S)  
25  
Type  
Hydrostatic Tuff Torq K664  
Horsepower  
Displacement  
Electrical System  
Hydraulic Fluid  
10w 50 Synthetic Engine Oil  
44.0 cu in. (725 cc)  
Alternator: 12 volt, 15 amp  
Battery: 500 CCA  
2 qt (1.9 L)  
Capacity  
5.4 qt (5,11 L)  
Speeds  
Forward: 0-5.8 MPH (9.3 km/h)  
Reverse: 0-3.5 MPH (5.6 km/h)  
310 ft-lbs (419 Nm)  
@ 3400 rpm  
Continuous Torque  
Output  
Oil Capacity  
Drawbar Rating  
Maximum Weight  
o
440 lbs (200 Kg)  
69s (316 Kg)  
27 HP* Kohler  
Make  
Kohler  
Model  
Command (CV740S)  
27  
Horsepower  
Displacement  
Electrical System  
44.0 cu in. (725 cc)  
Alternator: 12 volt, 15 amp  
Battery: 500 CCA  
2 qt (1.9 L)  
DIMENSIONS  
Oil Capacity  
Prestige / 1800 / 2800 / 500 Series  
Overall Length  
Overidth  
Heig
75” (190,5 cm)  
CHASSIS  
Fuel Tank Cap  
Rear Wheels  
41” (104 cm)  
Capacity: 4.0 Gallons (15,1 L)  
Tire Size: 24 x 12 -12  
At Top of Seat: 50” (127 cm)  
ight  
Inflation Pressure: 6-8 psi (,41-,55 bar)  
Tire Size: 23 x 10.50 -12  
or  
666 lbs (302 kg)  
Rear Wheels  
Front Wheels  
44 & 50” Mower Deck 125 lbs (57 kg)  
Inflation Pressure: 6-8 psi (,41-,55 bar)  
Tire Size: 16 x 6.50-8  
54” Mower Deck  
192 lbs (87 kg)  
Inflation Pressure: 15 psi (1.0 bar)  
Conquest / 1700 / 2700 / 400 Series  
Overall Length  
Overall Width  
Height  
75” (190,5 cm)  
K71 TRANSMISSION  
39” (99 cm)  
Type  
Hydrostatic Tuff Torq K7
At Top of Seat: 50” (127 cm)  
Hydraulic Fluid  
Capacity  
10w 30 Premium Engine
4.8 qt (4,6 L)  
Weight  
Tractor  
586 lbs (266 kg)  
112 lbs (51 kg)  
125 lbs (57 kg)  
Speeds  
Forward: 0-7.2 MPH (0-11.6 km/h)  
Reverse: 0-4.5 MPH (0-7.2 km/h)  
410 ft-lbs (554 Nm)  
44” Mower Deck  
50” Mower Deck  
@ 3400 rpm  
Continuous Torque  
Output  
Drawbar Rating  
Maximum Weight  
on Axle  
440 lbs (200 Kg)  
728 lbs (330 Kg)  
*Briggs & Stratton Models: The gross power rating for individual gas engine models is labeled in accordance with SAE  
(Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating  
performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are  
derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is  
affected by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide  
array of products on which engines are placed and the variety of environmental issues applicable to operating the  
equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment  
(actual "on-site" or net horsepower). This difference is due to a variety of factors including, but not limited to,  
accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient  
operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and  
capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.  
24  
Parts &  
Accessories  
Replacement Parts  
Replacement parts are available from your authorized  
dealer. Always use genuine service parts.  
Maintenance Items  
Many convenient and helpful service and maintenance  
items are available from you authorized dealer. Some of  
these items include:  
Engine Oil  
Tire Sealant  
Touch-Up Paint  
Grease Gun Kit  
8 oz. Grease Tube  
Degrimer/Degreaser  
Gas Stabilizer  
Optional Accessories  
Snowthrower Cab  
Snowthrower Attachments  
42" Dozer/Snow Blade  
Rear Wheel Weights  
Tire Chains  
Gas Cans  
Rear Weight Carrier  
Front Weight Carrier  
Triple Bag Collector  
Turbo Collector  
Tiller  
Twin Bag Grass Catcher  
Dump Cart  
Hour Meter Kit  
25  
Briggs & Stratton Power Products Group, LLC  
P. O. Box 702  
Milwaukee, WI U. S. A.  
Copyright © 2010 Briggs & Stratton Power Products Group, LLC  
Milwaukee, WI, USA. All rights reserved.  

Dixon Lawn Mower 12881 1104 User Guide
Great Dane Lawn Mower GSRKA1934S User Guide
McCulloch Lawn Mower 96141020600 User Guide
Poulan Lawn Mower 183050 User Guide
Poulan Lawn Mower Accessory 532178476 User Guide
Snapper Lawn Aerator 2442 User Manual
Snapper Lawn Mower 13HP User Manual
Snapper Lawn Mower SPV21E 7800008 User Manual
Snapper Lawn Mower W32120 User Manual
Snapper Lawn Mower XP21501KWV User Manual